* Re: [lm-sensors] Hardware monitoring on Asus A6JM laptop
2007-08-03 20:53 [lm-sensors] Hardware monitoring on Asus A6JM laptop Firas Kraiem
@ 2007-08-03 21:42 ` Juerg Haefliger
2007-08-03 22:05 ` Firas Kraiem
` (8 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Juerg Haefliger @ 2007-08-03 21:42 UTC (permalink / raw)
To: lm-sensors
Hi Firas,
Could you also send the output of 'lspci -nn'.
...juerg
On 8/3/07, Firas Kraiem <fkraiem@free.fr> wrote:
> Greetings
>
> A while ago, I posted a message to the list about getting hardware
> monitoring to work on my Asus laptop :
>
> http://lists.lm-sensors.org/pipermail/lm-sensors/2006-October/018031.html
>
> Due to various issues, I haven't been able to deal with the issue
> further. However, if someone could point me to the right direction about
> re-enabling my SMBus, it would be much appreciated. The output of lspci
> -vn follows.
>
> Regards,
> Firas
>
>
> 00:00.0 0600: 8086:27a0 (rev 03)
> Subsystem: 1043:1237
> Flags: bus master, fast devsel, latency 0
> Capabilities: [e0] Vendor Specific Information
>
> 00:01.0 0604: 8086:27a1 (rev 03) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary\0, secondary\x01, subordinate\x01, sec-latency=0
> I/O behind bridge: 0000b000-0000bfff
> Memory behind bridge: f9f00000-fdffffff
> Prefetchable memory behind bridge: 00000000bdf00000-00000000ddefffff
> Capabilities: [88] Subsystem: 8086:27a1
> Capabilities: [80] Power Management version 2
> Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable-
> Capabilities: [a0] Express Root Port (Slot+) IRQ 0
>
> 00:1b.0 0403: 8086:27d8 (rev 02)
> Subsystem: 1043:1123
> Flags: bus master, fast devsel, latency 0, IRQ 22
> Memory at febfc000 (64-bit, non-prefetchable) [size\x16K]
> Capabilities: [50] Power Management version 2
> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable-
> Capabilities: [70] Express Unknown type IRQ 0
>
> 00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary\0, secondary\x02, subordinate\x02, sec-latency=0
> I/O behind bridge: 0000c000-0000cfff
> Memory behind bridge: fe000000-fe0fffff
> Capabilities: [40] Express Root Port (Slot+) IRQ 0
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable-
> Capabilities: [90] Subsystem: 8086:27d0
> Capabilities: [a0] Power Management version 2
>
> 00:1c.3 0604: 8086:27d6 (rev 02) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary\0, secondary\x03, subordinate\x03, sec-latency=0
> Memory behind bridge: fe100000-fe1fffff
> Capabilities: [40] Express Root Port (Slot+) IRQ 0
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable-
> Capabilities: [90] Subsystem: 8086:27d6
> Capabilities: [a0] Power Management version 2
>
> 00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI])
> Subsystem: 1043:1237
> Flags: bus master, medium devsel, latency 0, IRQ 20
> I/O ports at ec00 [size2]
>
> 00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI])
> Subsystem: 1043:1237
> Flags: bus master, medium devsel, latency 0, IRQ 17
> I/O ports at e880 [size2]
>
> 00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI])
> Subsystem: 1043:1237
> Flags: bus master, medium devsel, latency 0, IRQ 19
> I/O ports at e800 [size2]
>
> 00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI])
> Subsystem: 1043:1237
> Flags: bus master, medium devsel, latency 0, IRQ 21
> I/O ports at e480 [size2]
>
> 00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI])
> Subsystem: 1043:1237
> Flags: bus master, medium devsel, latency 0, IRQ 20
> Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [50] Power Management version 2
> Capabilities: [58] Debug port
>
> 00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary\0, secondary\x04, subordinate\b, sec-latency2
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fe200000-feafffff
> Prefetchable memory behind bridge: 00000000ddf00000-00000000dfefffff
> Capabilities: [50] Subsystem: 8086:2448
>
> 00:1f.0 0601: 8086:27b9 (rev 02)
> Subsystem: 8086:27b9
> Flags: bus master, medium devsel, latency 0
> Capabilities: [e0] Vendor Specific Information
>
> 00:1f.1 0101: 8086:27df (rev 02) (prog-if 8a [Master SecP PriP])
> Subsystem: 1043:1237
> Flags: bus master, medium devsel, latency 0, IRQ 19
> I/O ports at 01f0 [size=8]
> I/O ports at 03f4 [size=1]
> I/O ports at 0170 [size=8]
> I/O ports at 0374 [size=1]
> I/O ports at ffa0 [size\x16]
>
> 01:00.0 0300: 10de:0398 (rev a1) (prog-if 00 [VGA])
> Subsystem: 1043:1232
> Flags: bus master, fast devsel, latency 0, IRQ 16
> Memory at fd000000 (32-bit, non-prefetchable) [size\x16M]
> Memory at c0000000 (64-bit, prefetchable) [size%6M]
> Memory at fc000000 (64-bit, non-prefetchable) [size\x16M]
> I/O ports at bc00 [size\x128]
> [virtual] Expansion ROM at fbfe0000 [disabled] [size\x128K]
> Capabilities: [60] Power Management version 2
> Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable-
> Capabilities: [78] Express Endpoint IRQ 0
>
> 02:00.0 0200: 10ec:8168 (rev 01)
> Subsystem: 1043:11f5
> Flags: bus master, fast devsel, latency 0, IRQ 16
> I/O ports at c800 [size%6]
> Memory at fe0ff000 (64-bit, non-prefetchable) [size=4K]
> Expansion ROM at fe0e0000 [disabled] [sizedK]
> Capabilities: [40] Power Management version 2
> Capabilities: [48] Vital Product Data
> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/1 Enable-
> Capabilities: [60] Express Endpoint IRQ 0
> Capabilities: [84] Vendor Specific Information
>
> 03:00.0 0280: 8086:4222 (rev 02)
> Subsystem: 8086:1001
> Flags: bus master, fast devsel, latency 0, IRQ 5
> Memory at fe1ff000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [c8] Power Management version 2
> Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
> Queue=0/0 Enable-
> Capabilities: [e0] Express Legacy Endpoint IRQ 0
>
> 04:01.0 0607: 1180:0476 (rev b3)
> Subsystem: 1043:1237
> Flags: bus master, medium devsel, latency 168, IRQ 18
> Memory at fe200000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary\x04, secondary\x05, subordinate\b, sec-latency\x176
> Memory window 0: 88000000-8bfff000 (prefetchable)
> Memory window 1: 8c000000-8ffff000
> I/O window 0: 0000d000-0000d0ff
> I/O window 1: 0000d400-0000d4ff
> 16-bit legacy interface ports at 0001
>
> 04:01.1 0c00: 1180:0552 (rev 08) (prog-if 10 [OHCI])
> Subsystem: 1043:1237
> Flags: bus master, medium devsel, latency 64, IRQ 19
> Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
> Capabilities: [dc] Power Management version 2
>
> 04:01.2 0805: 1180:0822 (rev 17)
> Subsystem: 1043:1237
> Flags: bus master, medium devsel, latency 64, IRQ 17
> Memory at feaff400 (32-bit, non-prefetchable) [size%6]
> Capabilities: [80] Power Management version 2
>
> 04:01.3 0880: 1180:0592 (rev 08)
> Subsystem: 1043:1237
> Flags: medium devsel, IRQ 5
> Memory at feaff000 (32-bit, non-prefetchable) [size%6]
> Capabilities: [80] Power Management version 2
>
>
> --
> () ascii ribbon campaign - against html e-mail
> /\ www.asciiribbon.org - against proprietary attachments
>
>
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@lm-sensors.org
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [lm-sensors] Hardware monitoring on Asus A6JM laptop
2007-08-03 20:53 [lm-sensors] Hardware monitoring on Asus A6JM laptop Firas Kraiem
2007-08-03 21:42 ` Juerg Haefliger
@ 2007-08-03 22:05 ` Firas Kraiem
2007-08-04 3:32 ` Juerg Haefliger
` (7 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Firas Kraiem @ 2007-08-03 22:05 UTC (permalink / raw)
To: lm-sensors
Here goes :)
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS/940GML
and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS/940GML
and 945GT Express PCI Express Root Port [8086:27a1] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 1 [8086:27d0] (rev 02)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 4 [8086:27d6] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC
Interface Bridge [8086:27b9] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 02)
01:00.0 VGA compatible controller [0300]: nVidia Corporation G70
[GeForce Go 7600] [10de:0398] (rev a1)
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
Unknown device [10ec:8168] (rev 01)
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless
3945ABG Network Connection [8086:4222] (rev 02)
04:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
04:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394
Controller [1180:0552] (rev 08)
04:01.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822
SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17)
04:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus
Host Adapter [1180:0592] (rev 08)
Juerg Haefliger wrote:
> Hi Firas,
>
> Could you also send the output of 'lspci -nn'.
>
> ...juerg
>
>
>
> On 8/3/07, Firas Kraiem <fkraiem@free.fr> wrote:
>> Greetings
>>
>> A while ago, I posted a message to the list about getting hardware
>> monitoring to work on my Asus laptop :
>>
>> http://lists.lm-sensors.org/pipermail/lm-sensors/2006-October/018031.html
>>
>> Due to various issues, I haven't been able to deal with the issue
>> further. However, if someone could point me to the right direction about
>> re-enabling my SMBus, it would be much appreciated. The output of lspci
>> -vn follows.
>>
>> Regards,
>> Firas
>>
>>
>> 00:00.0 0600: 8086:27a0 (rev 03)
>> Subsystem: 1043:1237
>> Flags: bus master, fast devsel, latency 0
>> Capabilities: [e0] Vendor Specific Information
>>
>> 00:01.0 0604: 8086:27a1 (rev 03) (prog-if 00 [Normal decode])
>> Flags: bus master, fast devsel, latency 0
>> Bus: primary\0, secondary\x01, subordinate\x01, sec-latency=0
>> I/O behind bridge: 0000b000-0000bfff
>> Memory behind bridge: f9f00000-fdffffff
>> Prefetchable memory behind bridge: 00000000bdf00000-00000000ddefffff
>> Capabilities: [88] Subsystem: 8086:27a1
>> Capabilities: [80] Power Management version 2
>> Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
>> Queue=0/0 Enable-
>> Capabilities: [a0] Express Root Port (Slot+) IRQ 0
>>
>> 00:1b.0 0403: 8086:27d8 (rev 02)
>> Subsystem: 1043:1123
>> Flags: bus master, fast devsel, latency 0, IRQ 22
>> Memory at febfc000 (64-bit, non-prefetchable) [size\x16K]
>> Capabilities: [50] Power Management version 2
>> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
>> Queue=0/0 Enable-
>> Capabilities: [70] Express Unknown type IRQ 0
>>
>> 00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode])
>> Flags: bus master, fast devsel, latency 0
>> Bus: primary\0, secondary\x02, subordinate\x02, sec-latency=0
>> I/O behind bridge: 0000c000-0000cfff
>> Memory behind bridge: fe000000-fe0fffff
>> Capabilities: [40] Express Root Port (Slot+) IRQ 0
>> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
>> Queue=0/0 Enable-
>> Capabilities: [90] Subsystem: 8086:27d0
>> Capabilities: [a0] Power Management version 2
>>
>> 00:1c.3 0604: 8086:27d6 (rev 02) (prog-if 00 [Normal decode])
>> Flags: bus master, fast devsel, latency 0
>> Bus: primary\0, secondary\x03, subordinate\x03, sec-latency=0
>> Memory behind bridge: fe100000-fe1fffff
>> Capabilities: [40] Express Root Port (Slot+) IRQ 0
>> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
>> Queue=0/0 Enable-
>> Capabilities: [90] Subsystem: 8086:27d6
>> Capabilities: [a0] Power Management version 2
>>
>> 00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI])
>> Subsystem: 1043:1237
>> Flags: bus master, medium devsel, latency 0, IRQ 20
>> I/O ports at ec00 [size2]
>>
>> 00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI])
>> Subsystem: 1043:1237
>> Flags: bus master, medium devsel, latency 0, IRQ 17
>> I/O ports at e880 [size2]
>>
>> 00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI])
>> Subsystem: 1043:1237
>> Flags: bus master, medium devsel, latency 0, IRQ 19
>> I/O ports at e800 [size2]
>>
>> 00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI])
>> Subsystem: 1043:1237
>> Flags: bus master, medium devsel, latency 0, IRQ 21
>> I/O ports at e480 [size2]
>>
>> 00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI])
>> Subsystem: 1043:1237
>> Flags: bus master, medium devsel, latency 0, IRQ 20
>> Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
>> Capabilities: [50] Power Management version 2
>> Capabilities: [58] Debug port
>>
>> 00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode])
>> Flags: bus master, fast devsel, latency 0
>> Bus: primary\0, secondary\x04, subordinate\b, sec-latency2
>> I/O behind bridge: 0000d000-0000dfff
>> Memory behind bridge: fe200000-feafffff
>> Prefetchable memory behind bridge: 00000000ddf00000-00000000dfefffff
>> Capabilities: [50] Subsystem: 8086:2448
>>
>> 00:1f.0 0601: 8086:27b9 (rev 02)
>> Subsystem: 8086:27b9
>> Flags: bus master, medium devsel, latency 0
>> Capabilities: [e0] Vendor Specific Information
>>
>> 00:1f.1 0101: 8086:27df (rev 02) (prog-if 8a [Master SecP PriP])
>> Subsystem: 1043:1237
>> Flags: bus master, medium devsel, latency 0, IRQ 19
>> I/O ports at 01f0 [size=8]
>> I/O ports at 03f4 [size=1]
>> I/O ports at 0170 [size=8]
>> I/O ports at 0374 [size=1]
>> I/O ports at ffa0 [size\x16]
>>
>> 01:00.0 0300: 10de:0398 (rev a1) (prog-if 00 [VGA])
>> Subsystem: 1043:1232
>> Flags: bus master, fast devsel, latency 0, IRQ 16
>> Memory at fd000000 (32-bit, non-prefetchable) [size\x16M]
>> Memory at c0000000 (64-bit, prefetchable) [size%6M]
>> Memory at fc000000 (64-bit, non-prefetchable) [size\x16M]
>> I/O ports at bc00 [size\x128]
>> [virtual] Expansion ROM at fbfe0000 [disabled] [size\x128K]
>> Capabilities: [60] Power Management version 2
>> Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+
>> Queue=0/0 Enable-
>> Capabilities: [78] Express Endpoint IRQ 0
>>
>> 02:00.0 0200: 10ec:8168 (rev 01)
>> Subsystem: 1043:11f5
>> Flags: bus master, fast devsel, latency 0, IRQ 16
>> I/O ports at c800 [size%6]
>> Memory at fe0ff000 (64-bit, non-prefetchable) [size=4K]
>> Expansion ROM at fe0e0000 [disabled] [sizedK]
>> Capabilities: [40] Power Management version 2
>> Capabilities: [48] Vital Product Data
>> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
>> Queue=0/1 Enable-
>> Capabilities: [60] Express Endpoint IRQ 0
>> Capabilities: [84] Vendor Specific Information
>>
>> 03:00.0 0280: 8086:4222 (rev 02)
>> Subsystem: 8086:1001
>> Flags: bus master, fast devsel, latency 0, IRQ 5
>> Memory at fe1ff000 (32-bit, non-prefetchable) [size=4K]
>> Capabilities: [c8] Power Management version 2
>> Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
>> Queue=0/0 Enable-
>> Capabilities: [e0] Express Legacy Endpoint IRQ 0
>>
>> 04:01.0 0607: 1180:0476 (rev b3)
>> Subsystem: 1043:1237
>> Flags: bus master, medium devsel, latency 168, IRQ 18
>> Memory at fe200000 (32-bit, non-prefetchable) [size=4K]
>> Bus: primary\x04, secondary\x05, subordinate\b, sec-latency\x176
>> Memory window 0: 88000000-8bfff000 (prefetchable)
>> Memory window 1: 8c000000-8ffff000
>> I/O window 0: 0000d000-0000d0ff
>> I/O window 1: 0000d400-0000d4ff
>> 16-bit legacy interface ports at 0001
>>
>> 04:01.1 0c00: 1180:0552 (rev 08) (prog-if 10 [OHCI])
>> Subsystem: 1043:1237
>> Flags: bus master, medium devsel, latency 64, IRQ 19
>> Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
>> Capabilities: [dc] Power Management version 2
>>
>> 04:01.2 0805: 1180:0822 (rev 17)
>> Subsystem: 1043:1237
>> Flags: bus master, medium devsel, latency 64, IRQ 17
>> Memory at feaff400 (32-bit, non-prefetchable) [size%6]
>> Capabilities: [80] Power Management version 2
>>
>> 04:01.3 0880: 1180:0592 (rev 08)
>> Subsystem: 1043:1237
>> Flags: medium devsel, IRQ 5
>> Memory at feaff000 (32-bit, non-prefetchable) [size%6]
>> Capabilities: [80] Power Management version 2
>>
>>
>> --
>> () ascii ribbon campaign - against html e-mail
>> /\ www.asciiribbon.org - against proprietary attachments
>>
>>
>> _______________________________________________
>> lm-sensors mailing list
>> lm-sensors@lm-sensors.org
>> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>>
>
>
--
() ascii ribbon campaign - against html e-mail
/\ www.asciiribbon.org - against proprietary attachments
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [lm-sensors] Hardware monitoring on Asus A6JM laptop
2007-08-03 20:53 [lm-sensors] Hardware monitoring on Asus A6JM laptop Firas Kraiem
2007-08-03 21:42 ` Juerg Haefliger
2007-08-03 22:05 ` Firas Kraiem
@ 2007-08-04 3:32 ` Juerg Haefliger
2007-08-04 16:24 ` Firas Kraiem
` (6 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Juerg Haefliger @ 2007-08-04 3:32 UTC (permalink / raw)
To: lm-sensors
[-- Attachment #1: Type: text/plain, Size: 11574 bytes --]
Hi Firas,
So you have an ICH7 and the SMBus controller is clearly disabled. It's
supposed to be device 00.1f.3 but it doesn't show up under lspci.
You're only chance is to patch the kernel an recompile. Do you feel
lucky today? :-)
Try the attached patch, recompile the kernel, install it, reboot, run
lspci and check if you can see the SMBus controller. I believe dmesg
should spit out some messages if a pci quirk is applied during the
boot process.
Let us know how it goes.
...juerg
On 8/3/07, Firas Kraiem <fkraiem@free.fr> wrote:
> Here goes :)
>
>
> 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS/940GML
> and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
> 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS/940GML
> and 945GT Express PCI Express Root Port [8086:27a1] (rev 03)
> 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
> Definition Audio Controller [8086:27d8] (rev 02)
> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
> Express Port 1 [8086:27d0] (rev 02)
> 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
> Express Port 4 [8086:27d6] (rev 02)
> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
> USB UHCI #1 [8086:27c8] (rev 02)
> 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
> USB UHCI #2 [8086:27c9] (rev 02)
> 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
> USB UHCI #3 [8086:27ca] (rev 02)
> 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
> USB UHCI #4 [8086:27cb] (rev 02)
> 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
> USB2 EHCI Controller [8086:27cc] (rev 02)
> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
> [8086:2448] (rev e2)
> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC
> Interface Bridge [8086:27b9] (rev 02)
> 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
> Controller [8086:27df] (rev 02)
> 01:00.0 VGA compatible controller [0300]: nVidia Corporation G70
> [GeForce Go 7600] [10de:0398] (rev a1)
> 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
> Unknown device [10ec:8168] (rev 01)
> 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless
> 3945ABG Network Connection [8086:4222] (rev 02)
> 04:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
> 04:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394
> Controller [1180:0552] (rev 08)
> 04:01.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822
> SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17)
> 04:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus
> Host Adapter [1180:0592] (rev 08)
>
>
> Juerg Haefliger wrote:
> > Hi Firas,
> >
> > Could you also send the output of 'lspci -nn'.
> >
> > ...juerg
> >
> >
> >
> > On 8/3/07, Firas Kraiem <fkraiem@free.fr> wrote:
> >> Greetings
> >>
> >> A while ago, I posted a message to the list about getting hardware
> >> monitoring to work on my Asus laptop :
> >>
> >> http://lists.lm-sensors.org/pipermail/lm-sensors/2006-October/018031.html
> >>
> >> Due to various issues, I haven't been able to deal with the issue
> >> further. However, if someone could point me to the right direction about
> >> re-enabling my SMBus, it would be much appreciated. The output of lspci
> >> -vn follows.
> >>
> >> Regards,
> >> Firas
> >>
> >>
> >> 00:00.0 0600: 8086:27a0 (rev 03)
> >> Subsystem: 1043:1237
> >> Flags: bus master, fast devsel, latency 0
> >> Capabilities: [e0] Vendor Specific Information
> >>
> >> 00:01.0 0604: 8086:27a1 (rev 03) (prog-if 00 [Normal decode])
> >> Flags: bus master, fast devsel, latency 0
> >> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> >> I/O behind bridge: 0000b000-0000bfff
> >> Memory behind bridge: f9f00000-fdffffff
> >> Prefetchable memory behind bridge: 00000000bdf00000-00000000ddefffff
> >> Capabilities: [88] Subsystem: 8086:27a1
> >> Capabilities: [80] Power Management version 2
> >> Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
> >> Queue=0/0 Enable-
> >> Capabilities: [a0] Express Root Port (Slot+) IRQ 0
> >>
> >> 00:1b.0 0403: 8086:27d8 (rev 02)
> >> Subsystem: 1043:1123
> >> Flags: bus master, fast devsel, latency 0, IRQ 22
> >> Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
> >> Capabilities: [50] Power Management version 2
> >> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
> >> Queue=0/0 Enable-
> >> Capabilities: [70] Express Unknown type IRQ 0
> >>
> >> 00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode])
> >> Flags: bus master, fast devsel, latency 0
> >> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> >> I/O behind bridge: 0000c000-0000cfff
> >> Memory behind bridge: fe000000-fe0fffff
> >> Capabilities: [40] Express Root Port (Slot+) IRQ 0
> >> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
> >> Queue=0/0 Enable-
> >> Capabilities: [90] Subsystem: 8086:27d0
> >> Capabilities: [a0] Power Management version 2
> >>
> >> 00:1c.3 0604: 8086:27d6 (rev 02) (prog-if 00 [Normal decode])
> >> Flags: bus master, fast devsel, latency 0
> >> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> >> Memory behind bridge: fe100000-fe1fffff
> >> Capabilities: [40] Express Root Port (Slot+) IRQ 0
> >> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
> >> Queue=0/0 Enable-
> >> Capabilities: [90] Subsystem: 8086:27d6
> >> Capabilities: [a0] Power Management version 2
> >>
> >> 00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI])
> >> Subsystem: 1043:1237
> >> Flags: bus master, medium devsel, latency 0, IRQ 20
> >> I/O ports at ec00 [size=32]
> >>
> >> 00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI])
> >> Subsystem: 1043:1237
> >> Flags: bus master, medium devsel, latency 0, IRQ 17
> >> I/O ports at e880 [size=32]
> >>
> >> 00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI])
> >> Subsystem: 1043:1237
> >> Flags: bus master, medium devsel, latency 0, IRQ 19
> >> I/O ports at e800 [size=32]
> >>
> >> 00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI])
> >> Subsystem: 1043:1237
> >> Flags: bus master, medium devsel, latency 0, IRQ 21
> >> I/O ports at e480 [size=32]
> >>
> >> 00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI])
> >> Subsystem: 1043:1237
> >> Flags: bus master, medium devsel, latency 0, IRQ 20
> >> Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
> >> Capabilities: [50] Power Management version 2
> >> Capabilities: [58] Debug port
> >>
> >> 00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode])
> >> Flags: bus master, fast devsel, latency 0
> >> Bus: primary=00, secondary=04, subordinate=08, sec-latency=32
> >> I/O behind bridge: 0000d000-0000dfff
> >> Memory behind bridge: fe200000-feafffff
> >> Prefetchable memory behind bridge: 00000000ddf00000-00000000dfefffff
> >> Capabilities: [50] Subsystem: 8086:2448
> >>
> >> 00:1f.0 0601: 8086:27b9 (rev 02)
> >> Subsystem: 8086:27b9
> >> Flags: bus master, medium devsel, latency 0
> >> Capabilities: [e0] Vendor Specific Information
> >>
> >> 00:1f.1 0101: 8086:27df (rev 02) (prog-if 8a [Master SecP PriP])
> >> Subsystem: 1043:1237
> >> Flags: bus master, medium devsel, latency 0, IRQ 19
> >> I/O ports at 01f0 [size=8]
> >> I/O ports at 03f4 [size=1]
> >> I/O ports at 0170 [size=8]
> >> I/O ports at 0374 [size=1]
> >> I/O ports at ffa0 [size=16]
> >>
> >> 01:00.0 0300: 10de:0398 (rev a1) (prog-if 00 [VGA])
> >> Subsystem: 1043:1232
> >> Flags: bus master, fast devsel, latency 0, IRQ 16
> >> Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
> >> Memory at c0000000 (64-bit, prefetchable) [size=256M]
> >> Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
> >> I/O ports at bc00 [size=128]
> >> [virtual] Expansion ROM at fbfe0000 [disabled] [size=128K]
> >> Capabilities: [60] Power Management version 2
> >> Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+
> >> Queue=0/0 Enable-
> >> Capabilities: [78] Express Endpoint IRQ 0
> >>
> >> 02:00.0 0200: 10ec:8168 (rev 01)
> >> Subsystem: 1043:11f5
> >> Flags: bus master, fast devsel, latency 0, IRQ 16
> >> I/O ports at c800 [size=256]
> >> Memory at fe0ff000 (64-bit, non-prefetchable) [size=4K]
> >> Expansion ROM at fe0e0000 [disabled] [size=64K]
> >> Capabilities: [40] Power Management version 2
> >> Capabilities: [48] Vital Product Data
> >> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
> >> Queue=0/1 Enable-
> >> Capabilities: [60] Express Endpoint IRQ 0
> >> Capabilities: [84] Vendor Specific Information
> >>
> >> 03:00.0 0280: 8086:4222 (rev 02)
> >> Subsystem: 8086:1001
> >> Flags: bus master, fast devsel, latency 0, IRQ 5
> >> Memory at fe1ff000 (32-bit, non-prefetchable) [size=4K]
> >> Capabilities: [c8] Power Management version 2
> >> Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
> >> Queue=0/0 Enable-
> >> Capabilities: [e0] Express Legacy Endpoint IRQ 0
> >>
> >> 04:01.0 0607: 1180:0476 (rev b3)
> >> Subsystem: 1043:1237
> >> Flags: bus master, medium devsel, latency 168, IRQ 18
> >> Memory at fe200000 (32-bit, non-prefetchable) [size=4K]
> >> Bus: primary=04, secondary=05, subordinate=08, sec-latency=176
> >> Memory window 0: 88000000-8bfff000 (prefetchable)
> >> Memory window 1: 8c000000-8ffff000
> >> I/O window 0: 0000d000-0000d0ff
> >> I/O window 1: 0000d400-0000d4ff
> >> 16-bit legacy interface ports at 0001
> >>
> >> 04:01.1 0c00: 1180:0552 (rev 08) (prog-if 10 [OHCI])
> >> Subsystem: 1043:1237
> >> Flags: bus master, medium devsel, latency 64, IRQ 19
> >> Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
> >> Capabilities: [dc] Power Management version 2
> >>
> >> 04:01.2 0805: 1180:0822 (rev 17)
> >> Subsystem: 1043:1237
> >> Flags: bus master, medium devsel, latency 64, IRQ 17
> >> Memory at feaff400 (32-bit, non-prefetchable) [size=256]
> >> Capabilities: [80] Power Management version 2
> >>
> >> 04:01.3 0880: 1180:0592 (rev 08)
> >> Subsystem: 1043:1237
> >> Flags: medium devsel, IRQ 5
> >> Memory at feaff000 (32-bit, non-prefetchable) [size=256]
> >> Capabilities: [80] Power Management version 2
> >>
> >>
> >> --
> >> () ascii ribbon campaign - against html e-mail
> >> /\ www.asciiribbon.org - against proprietary attachments
> >>
> >>
> >> _______________________________________________
> >> lm-sensors mailing list
> >> lm-sensors@lm-sensors.org
> >> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
> >>
> >
> >
>
>
> --
> () ascii ribbon campaign - against html e-mail
> /\ www.asciiribbon.org - against proprietary attachments
>
>
[-- Attachment #2: pci_quirks_add_asus_a6jm.patch --]
[-- Type: text/x-patch, Size: 1773 bytes --]
Index: linux-2.6.22/drivers/pci/quirks.c
===================================================================
--- linux-2.6.22.orig/drivers/pci/quirks.c 2007-08-03 19:37:23.000000000 -0700
+++ linux-2.6.22/drivers/pci/quirks.c 2007-08-03 19:36:08.000000000 -0700
@@ -1030,6 +1030,11 @@
case 0x1977: /* A6VA notebook */
asus_hides_smbus = 1;
}
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82945GM_HB)
+ switch (dev->subsystem_device) {
+ case 0x1237: /* A6JM notebook */
+ asus_hides_smbus = 1;
+ }
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
switch(dev->subsystem_device) {
@@ -1071,6 +1076,7 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82945GM_HB, asus_hides_smbus_hostbridge );
static void asus_hides_smbus_lpc(struct pci_dev *dev)
{
@@ -1118,7 +1124,9 @@
printk(KERN_INFO "PCI: Enabled ICH6/i801 SMBus device\n");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6 );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, asus_hides_smbus_lpc_ich6 );
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6 );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, asus_hides_smbus_lpc_ich6 );
/*
* SiS 96x south bridge: BIOS typically hides SMBus device...
[-- Attachment #3: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [lm-sensors] Hardware monitoring on Asus A6JM laptop
2007-08-03 20:53 [lm-sensors] Hardware monitoring on Asus A6JM laptop Firas Kraiem
` (2 preceding siblings ...)
2007-08-04 3:32 ` Juerg Haefliger
@ 2007-08-04 16:24 ` Firas Kraiem
2007-08-04 16:44 ` Juerg Haefliger
` (5 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Firas Kraiem @ 2007-08-04 16:24 UTC (permalink / raw)
To: lm-sensors
Hi Juerg,
It went flawlessly :) After I patched and recompiled the kernel and
rebooted, sensors-detect detected my SMBus just fine.
Thanks for the help !
Firas
Juerg Haefliger wrote:
> Hi Firas,
>
> So you have an ICH7 and the SMBus controller is clearly disabled. It's
> supposed to be device 00.1f.3 but it doesn't show up under lspci.
> You're only chance is to patch the kernel an recompile. Do you feel
> lucky today? :-)
>
> Try the attached patch, recompile the kernel, install it, reboot, run
> lspci and check if you can see the SMBus controller. I believe dmesg
> should spit out some messages if a pci quirk is applied during the
> boot process.
>
> Let us know how it goes.
>
> ...juerg
>
>
>
>
> On 8/3/07, Firas Kraiem <fkraiem@free.fr> wrote:
>> Here goes :)
>>
>>
>> 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS/940GML
>> and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
>> 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS/940GML
>> and 945GT Express PCI Express Root Port [8086:27a1] (rev 03)
>> 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
>> Definition Audio Controller [8086:27d8] (rev 02)
>> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
>> Express Port 1 [8086:27d0] (rev 02)
>> 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
>> Express Port 4 [8086:27d6] (rev 02)
>> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
>> USB UHCI #1 [8086:27c8] (rev 02)
>> 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
>> USB UHCI #2 [8086:27c9] (rev 02)
>> 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
>> USB UHCI #3 [8086:27ca] (rev 02)
>> 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
>> USB UHCI #4 [8086:27cb] (rev 02)
>> 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
>> USB2 EHCI Controller [8086:27cc] (rev 02)
>> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
>> [8086:2448] (rev e2)
>> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC
>> Interface Bridge [8086:27b9] (rev 02)
>> 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
>> Controller [8086:27df] (rev 02)
>> 01:00.0 VGA compatible controller [0300]: nVidia Corporation G70
>> [GeForce Go 7600] [10de:0398] (rev a1)
>> 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
>> Unknown device [10ec:8168] (rev 01)
>> 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless
>> 3945ABG Network Connection [8086:4222] (rev 02)
>> 04:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
>> 04:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394
>> Controller [1180:0552] (rev 08)
>> 04:01.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822
>> SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17)
>> 04:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus
>> Host Adapter [1180:0592] (rev 08)
>>
>>
>> Juerg Haefliger wrote:
>>> Hi Firas,
>>>
>>> Could you also send the output of 'lspci -nn'.
>>>
>>> ...juerg
>>>
>>>
>>>
>>> On 8/3/07, Firas Kraiem <fkraiem@free.fr> wrote:
>>>> Greetings
>>>>
>>>> A while ago, I posted a message to the list about getting hardware
>>>> monitoring to work on my Asus laptop :
>>>>
>>>> http://lists.lm-sensors.org/pipermail/lm-sensors/2006-October/018031.html
>>>>
>>>> Due to various issues, I haven't been able to deal with the issue
>>>> further. However, if someone could point me to the right direction about
>>>> re-enabling my SMBus, it would be much appreciated. The output of lspci
>>>> -vn follows.
>>>>
>>>> Regards,
>>>> Firas
>>>>
>>>>
>>>> 00:00.0 0600: 8086:27a0 (rev 03)
>>>> Subsystem: 1043:1237
>>>> Flags: bus master, fast devsel, latency 0
>>>> Capabilities: [e0] Vendor Specific Information
>>>>
>>>> 00:01.0 0604: 8086:27a1 (rev 03) (prog-if 00 [Normal decode])
>>>> Flags: bus master, fast devsel, latency 0
>>>> Bus: primary\0, secondary\x01, subordinate\x01, sec-latency=0
>>>> I/O behind bridge: 0000b000-0000bfff
>>>> Memory behind bridge: f9f00000-fdffffff
>>>> Prefetchable memory behind bridge: 00000000bdf00000-00000000ddefffff
>>>> Capabilities: [88] Subsystem: 8086:27a1
>>>> Capabilities: [80] Power Management version 2
>>>> Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
>>>> Queue=0/0 Enable-
>>>> Capabilities: [a0] Express Root Port (Slot+) IRQ 0
>>>>
>>>> 00:1b.0 0403: 8086:27d8 (rev 02)
>>>> Subsystem: 1043:1123
>>>> Flags: bus master, fast devsel, latency 0, IRQ 22
>>>> Memory at febfc000 (64-bit, non-prefetchable) [size\x16K]
>>>> Capabilities: [50] Power Management version 2
>>>> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
>>>> Queue=0/0 Enable-
>>>> Capabilities: [70] Express Unknown type IRQ 0
>>>>
>>>> 00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode])
>>>> Flags: bus master, fast devsel, latency 0
>>>> Bus: primary\0, secondary\x02, subordinate\x02, sec-latency=0
>>>> I/O behind bridge: 0000c000-0000cfff
>>>> Memory behind bridge: fe000000-fe0fffff
>>>> Capabilities: [40] Express Root Port (Slot+) IRQ 0
>>>> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
>>>> Queue=0/0 Enable-
>>>> Capabilities: [90] Subsystem: 8086:27d0
>>>> Capabilities: [a0] Power Management version 2
>>>>
>>>> 00:1c.3 0604: 8086:27d6 (rev 02) (prog-if 00 [Normal decode])
>>>> Flags: bus master, fast devsel, latency 0
>>>> Bus: primary\0, secondary\x03, subordinate\x03, sec-latency=0
>>>> Memory behind bridge: fe100000-fe1fffff
>>>> Capabilities: [40] Express Root Port (Slot+) IRQ 0
>>>> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
>>>> Queue=0/0 Enable-
>>>> Capabilities: [90] Subsystem: 8086:27d6
>>>> Capabilities: [a0] Power Management version 2
>>>>
>>>> 00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI])
>>>> Subsystem: 1043:1237
>>>> Flags: bus master, medium devsel, latency 0, IRQ 20
>>>> I/O ports at ec00 [size2]
>>>>
>>>> 00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI])
>>>> Subsystem: 1043:1237
>>>> Flags: bus master, medium devsel, latency 0, IRQ 17
>>>> I/O ports at e880 [size2]
>>>>
>>>> 00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI])
>>>> Subsystem: 1043:1237
>>>> Flags: bus master, medium devsel, latency 0, IRQ 19
>>>> I/O ports at e800 [size2]
>>>>
>>>> 00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI])
>>>> Subsystem: 1043:1237
>>>> Flags: bus master, medium devsel, latency 0, IRQ 21
>>>> I/O ports at e480 [size2]
>>>>
>>>> 00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI])
>>>> Subsystem: 1043:1237
>>>> Flags: bus master, medium devsel, latency 0, IRQ 20
>>>> Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
>>>> Capabilities: [50] Power Management version 2
>>>> Capabilities: [58] Debug port
>>>>
>>>> 00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode])
>>>> Flags: bus master, fast devsel, latency 0
>>>> Bus: primary\0, secondary\x04, subordinate\b, sec-latency2
>>>> I/O behind bridge: 0000d000-0000dfff
>>>> Memory behind bridge: fe200000-feafffff
>>>> Prefetchable memory behind bridge: 00000000ddf00000-00000000dfefffff
>>>> Capabilities: [50] Subsystem: 8086:2448
>>>>
>>>> 00:1f.0 0601: 8086:27b9 (rev 02)
>>>> Subsystem: 8086:27b9
>>>> Flags: bus master, medium devsel, latency 0
>>>> Capabilities: [e0] Vendor Specific Information
>>>>
>>>> 00:1f.1 0101: 8086:27df (rev 02) (prog-if 8a [Master SecP PriP])
>>>> Subsystem: 1043:1237
>>>> Flags: bus master, medium devsel, latency 0, IRQ 19
>>>> I/O ports at 01f0 [size=8]
>>>> I/O ports at 03f4 [size=1]
>>>> I/O ports at 0170 [size=8]
>>>> I/O ports at 0374 [size=1]
>>>> I/O ports at ffa0 [size\x16]
>>>>
>>>> 01:00.0 0300: 10de:0398 (rev a1) (prog-if 00 [VGA])
>>>> Subsystem: 1043:1232
>>>> Flags: bus master, fast devsel, latency 0, IRQ 16
>>>> Memory at fd000000 (32-bit, non-prefetchable) [size\x16M]
>>>> Memory at c0000000 (64-bit, prefetchable) [size%6M]
>>>> Memory at fc000000 (64-bit, non-prefetchable) [size\x16M]
>>>> I/O ports at bc00 [size\x128]
>>>> [virtual] Expansion ROM at fbfe0000 [disabled] [size\x128K]
>>>> Capabilities: [60] Power Management version 2
>>>> Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+
>>>> Queue=0/0 Enable-
>>>> Capabilities: [78] Express Endpoint IRQ 0
>>>>
>>>> 02:00.0 0200: 10ec:8168 (rev 01)
>>>> Subsystem: 1043:11f5
>>>> Flags: bus master, fast devsel, latency 0, IRQ 16
>>>> I/O ports at c800 [size%6]
>>>> Memory at fe0ff000 (64-bit, non-prefetchable) [size=4K]
>>>> Expansion ROM at fe0e0000 [disabled] [sizedK]
>>>> Capabilities: [40] Power Management version 2
>>>> Capabilities: [48] Vital Product Data
>>>> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
>>>> Queue=0/1 Enable-
>>>> Capabilities: [60] Express Endpoint IRQ 0
>>>> Capabilities: [84] Vendor Specific Information
>>>>
>>>> 03:00.0 0280: 8086:4222 (rev 02)
>>>> Subsystem: 8086:1001
>>>> Flags: bus master, fast devsel, latency 0, IRQ 5
>>>> Memory at fe1ff000 (32-bit, non-prefetchable) [size=4K]
>>>> Capabilities: [c8] Power Management version 2
>>>> Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
>>>> Queue=0/0 Enable-
>>>> Capabilities: [e0] Express Legacy Endpoint IRQ 0
>>>>
>>>> 04:01.0 0607: 1180:0476 (rev b3)
>>>> Subsystem: 1043:1237
>>>> Flags: bus master, medium devsel, latency 168, IRQ 18
>>>> Memory at fe200000 (32-bit, non-prefetchable) [size=4K]
>>>> Bus: primary\x04, secondary\x05, subordinate\b, sec-latency\x176
>>>> Memory window 0: 88000000-8bfff000 (prefetchable)
>>>> Memory window 1: 8c000000-8ffff000
>>>> I/O window 0: 0000d000-0000d0ff
>>>> I/O window 1: 0000d400-0000d4ff
>>>> 16-bit legacy interface ports at 0001
>>>>
>>>> 04:01.1 0c00: 1180:0552 (rev 08) (prog-if 10 [OHCI])
>>>> Subsystem: 1043:1237
>>>> Flags: bus master, medium devsel, latency 64, IRQ 19
>>>> Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
>>>> Capabilities: [dc] Power Management version 2
>>>>
>>>> 04:01.2 0805: 1180:0822 (rev 17)
>>>> Subsystem: 1043:1237
>>>> Flags: bus master, medium devsel, latency 64, IRQ 17
>>>> Memory at feaff400 (32-bit, non-prefetchable) [size%6]
>>>> Capabilities: [80] Power Management version 2
>>>>
>>>> 04:01.3 0880: 1180:0592 (rev 08)
>>>> Subsystem: 1043:1237
>>>> Flags: medium devsel, IRQ 5
>>>> Memory at feaff000 (32-bit, non-prefetchable) [size%6]
>>>> Capabilities: [80] Power Management version 2
>>>>
>>>>
>>>> --
>>>> () ascii ribbon campaign - against html e-mail
>>>> /\ www.asciiribbon.org - against proprietary attachments
>>>>
>>>>
>>>> _______________________________________________
>>>> lm-sensors mailing list
>>>> lm-sensors@lm-sensors.org
>>>> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>>>>
>>>
>>
>> --
>> () ascii ribbon campaign - against html e-mail
>> /\ www.asciiribbon.org - against proprietary attachments
>>
>>
--
() ascii ribbon campaign - against html e-mail
/\ www.asciiribbon.org - against proprietary attachments
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [lm-sensors] Hardware monitoring on Asus A6JM laptop
2007-08-03 20:53 [lm-sensors] Hardware monitoring on Asus A6JM laptop Firas Kraiem
` (3 preceding siblings ...)
2007-08-04 16:24 ` Firas Kraiem
@ 2007-08-04 16:44 ` Juerg Haefliger
2007-08-04 16:52 ` Firas Kraiem
` (4 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Juerg Haefliger @ 2007-08-04 16:44 UTC (permalink / raw)
To: lm-sensors
Hi Firas,
> Hi Juerg,
>
> It went flawlessly :) After I patched and recompiled the kernel and
> rebooted, sensors-detect detected my SMBus just fine.
Very good! Could you please send the lspci -nnvv and sensors output?
Now we just need to get the patch into mainline...
...juerg
> Thanks for the help !
>
> Firas
>
> Juerg Haefliger wrote:
> > Hi Firas,
> >
> > So you have an ICH7 and the SMBus controller is clearly disabled. It's
> > supposed to be device 00.1f.3 but it doesn't show up under lspci.
> > You're only chance is to patch the kernel an recompile. Do you feel
> > lucky today? :-)
> >
> > Try the attached patch, recompile the kernel, install it, reboot, run
> > lspci and check if you can see the SMBus controller. I believe dmesg
> > should spit out some messages if a pci quirk is applied during the
> > boot process.
> >
> > Let us know how it goes.
> >
> > ...juerg
> >
> >
> >
> >
> > On 8/3/07, Firas Kraiem <fkraiem@free.fr> wrote:
> >> Here goes :)
> >>
> >>
> >> 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS/940GML
> >> and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
> >> 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS/940GML
> >> and 945GT Express PCI Express Root Port [8086:27a1] (rev 03)
> >> 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
> >> Definition Audio Controller [8086:27d8] (rev 02)
> >> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
> >> Express Port 1 [8086:27d0] (rev 02)
> >> 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
> >> Express Port 4 [8086:27d6] (rev 02)
> >> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
> >> USB UHCI #1 [8086:27c8] (rev 02)
> >> 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
> >> USB UHCI #2 [8086:27c9] (rev 02)
> >> 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
> >> USB UHCI #3 [8086:27ca] (rev 02)
> >> 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
> >> USB UHCI #4 [8086:27cb] (rev 02)
> >> 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
> >> USB2 EHCI Controller [8086:27cc] (rev 02)
> >> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
> >> [8086:2448] (rev e2)
> >> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC
> >> Interface Bridge [8086:27b9] (rev 02)
> >> 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
> >> Controller [8086:27df] (rev 02)
> >> 01:00.0 VGA compatible controller [0300]: nVidia Corporation G70
> >> [GeForce Go 7600] [10de:0398] (rev a1)
> >> 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
> >> Unknown device [10ec:8168] (rev 01)
> >> 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless
> >> 3945ABG Network Connection [8086:4222] (rev 02)
> >> 04:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
> >> 04:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394
> >> Controller [1180:0552] (rev 08)
> >> 04:01.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822
> >> SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17)
> >> 04:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus
> >> Host Adapter [1180:0592] (rev 08)
> >>
> >>
> >> Juerg Haefliger wrote:
> >>> Hi Firas,
> >>>
> >>> Could you also send the output of 'lspci -nn'.
> >>>
> >>> ...juerg
> >>>
> >>>
> >>>
> >>> On 8/3/07, Firas Kraiem <fkraiem@free.fr> wrote:
> >>>> Greetings
> >>>>
> >>>> A while ago, I posted a message to the list about getting hardware
> >>>> monitoring to work on my Asus laptop :
> >>>>
> >>>> http://lists.lm-sensors.org/pipermail/lm-sensors/2006-October/018031.html
> >>>>
> >>>> Due to various issues, I haven't been able to deal with the issue
> >>>> further. However, if someone could point me to the right direction about
> >>>> re-enabling my SMBus, it would be much appreciated. The output of lspci
> >>>> -vn follows.
> >>>>
> >>>> Regards,
> >>>> Firas
> >>>>
> >>>>
> >>>> 00:00.0 0600: 8086:27a0 (rev 03)
> >>>> Subsystem: 1043:1237
> >>>> Flags: bus master, fast devsel, latency 0
> >>>> Capabilities: [e0] Vendor Specific Information
> >>>>
> >>>> 00:01.0 0604: 8086:27a1 (rev 03) (prog-if 00 [Normal decode])
> >>>> Flags: bus master, fast devsel, latency 0
> >>>> Bus: primary\0, secondary\x01, subordinate\x01, sec-latency=0
> >>>> I/O behind bridge: 0000b000-0000bfff
> >>>> Memory behind bridge: f9f00000-fdffffff
> >>>> Prefetchable memory behind bridge: 00000000bdf00000-00000000ddefffff
> >>>> Capabilities: [88] Subsystem: 8086:27a1
> >>>> Capabilities: [80] Power Management version 2
> >>>> Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
> >>>> Queue=0/0 Enable-
> >>>> Capabilities: [a0] Express Root Port (Slot+) IRQ 0
> >>>>
> >>>> 00:1b.0 0403: 8086:27d8 (rev 02)
> >>>> Subsystem: 1043:1123
> >>>> Flags: bus master, fast devsel, latency 0, IRQ 22
> >>>> Memory at febfc000 (64-bit, non-prefetchable) [size\x16K]
> >>>> Capabilities: [50] Power Management version 2
> >>>> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
> >>>> Queue=0/0 Enable-
> >>>> Capabilities: [70] Express Unknown type IRQ 0
> >>>>
> >>>> 00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode])
> >>>> Flags: bus master, fast devsel, latency 0
> >>>> Bus: primary\0, secondary\x02, subordinate\x02, sec-latency=0
> >>>> I/O behind bridge: 0000c000-0000cfff
> >>>> Memory behind bridge: fe000000-fe0fffff
> >>>> Capabilities: [40] Express Root Port (Slot+) IRQ 0
> >>>> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
> >>>> Queue=0/0 Enable-
> >>>> Capabilities: [90] Subsystem: 8086:27d0
> >>>> Capabilities: [a0] Power Management version 2
> >>>>
> >>>> 00:1c.3 0604: 8086:27d6 (rev 02) (prog-if 00 [Normal decode])
> >>>> Flags: bus master, fast devsel, latency 0
> >>>> Bus: primary\0, secondary\x03, subordinate\x03, sec-latency=0
> >>>> Memory behind bridge: fe100000-fe1fffff
> >>>> Capabilities: [40] Express Root Port (Slot+) IRQ 0
> >>>> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
> >>>> Queue=0/0 Enable-
> >>>> Capabilities: [90] Subsystem: 8086:27d6
> >>>> Capabilities: [a0] Power Management version 2
> >>>>
> >>>> 00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI])
> >>>> Subsystem: 1043:1237
> >>>> Flags: bus master, medium devsel, latency 0, IRQ 20
> >>>> I/O ports at ec00 [size2]
> >>>>
> >>>> 00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI])
> >>>> Subsystem: 1043:1237
> >>>> Flags: bus master, medium devsel, latency 0, IRQ 17
> >>>> I/O ports at e880 [size2]
> >>>>
> >>>> 00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI])
> >>>> Subsystem: 1043:1237
> >>>> Flags: bus master, medium devsel, latency 0, IRQ 19
> >>>> I/O ports at e800 [size2]
> >>>>
> >>>> 00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI])
> >>>> Subsystem: 1043:1237
> >>>> Flags: bus master, medium devsel, latency 0, IRQ 21
> >>>> I/O ports at e480 [size2]
> >>>>
> >>>> 00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI])
> >>>> Subsystem: 1043:1237
> >>>> Flags: bus master, medium devsel, latency 0, IRQ 20
> >>>> Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
> >>>> Capabilities: [50] Power Management version 2
> >>>> Capabilities: [58] Debug port
> >>>>
> >>>> 00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode])
> >>>> Flags: bus master, fast devsel, latency 0
> >>>> Bus: primary\0, secondary\x04, subordinate\b, sec-latency2
> >>>> I/O behind bridge: 0000d000-0000dfff
> >>>> Memory behind bridge: fe200000-feafffff
> >>>> Prefetchable memory behind bridge: 00000000ddf00000-00000000dfefffff
> >>>> Capabilities: [50] Subsystem: 8086:2448
> >>>>
> >>>> 00:1f.0 0601: 8086:27b9 (rev 02)
> >>>> Subsystem: 8086:27b9
> >>>> Flags: bus master, medium devsel, latency 0
> >>>> Capabilities: [e0] Vendor Specific Information
> >>>>
> >>>> 00:1f.1 0101: 8086:27df (rev 02) (prog-if 8a [Master SecP PriP])
> >>>> Subsystem: 1043:1237
> >>>> Flags: bus master, medium devsel, latency 0, IRQ 19
> >>>> I/O ports at 01f0 [size=8]
> >>>> I/O ports at 03f4 [size=1]
> >>>> I/O ports at 0170 [size=8]
> >>>> I/O ports at 0374 [size=1]
> >>>> I/O ports at ffa0 [size\x16]
> >>>>
> >>>> 01:00.0 0300: 10de:0398 (rev a1) (prog-if 00 [VGA])
> >>>> Subsystem: 1043:1232
> >>>> Flags: bus master, fast devsel, latency 0, IRQ 16
> >>>> Memory at fd000000 (32-bit, non-prefetchable) [size\x16M]
> >>>> Memory at c0000000 (64-bit, prefetchable) [size%6M]
> >>>> Memory at fc000000 (64-bit, non-prefetchable) [size\x16M]
> >>>> I/O ports at bc00 [size\x128]
> >>>> [virtual] Expansion ROM at fbfe0000 [disabled] [size\x128K]
> >>>> Capabilities: [60] Power Management version 2
> >>>> Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+
> >>>> Queue=0/0 Enable-
> >>>> Capabilities: [78] Express Endpoint IRQ 0
> >>>>
> >>>> 02:00.0 0200: 10ec:8168 (rev 01)
> >>>> Subsystem: 1043:11f5
> >>>> Flags: bus master, fast devsel, latency 0, IRQ 16
> >>>> I/O ports at c800 [size%6]
> >>>> Memory at fe0ff000 (64-bit, non-prefetchable) [size=4K]
> >>>> Expansion ROM at fe0e0000 [disabled] [sizedK]
> >>>> Capabilities: [40] Power Management version 2
> >>>> Capabilities: [48] Vital Product Data
> >>>> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
> >>>> Queue=0/1 Enable-
> >>>> Capabilities: [60] Express Endpoint IRQ 0
> >>>> Capabilities: [84] Vendor Specific Information
> >>>>
> >>>> 03:00.0 0280: 8086:4222 (rev 02)
> >>>> Subsystem: 8086:1001
> >>>> Flags: bus master, fast devsel, latency 0, IRQ 5
> >>>> Memory at fe1ff000 (32-bit, non-prefetchable) [size=4K]
> >>>> Capabilities: [c8] Power Management version 2
> >>>> Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
> >>>> Queue=0/0 Enable-
> >>>> Capabilities: [e0] Express Legacy Endpoint IRQ 0
> >>>>
> >>>> 04:01.0 0607: 1180:0476 (rev b3)
> >>>> Subsystem: 1043:1237
> >>>> Flags: bus master, medium devsel, latency 168, IRQ 18
> >>>> Memory at fe200000 (32-bit, non-prefetchable) [size=4K]
> >>>> Bus: primary\x04, secondary\x05, subordinate\b, sec-latency\x176
> >>>> Memory window 0: 88000000-8bfff000 (prefetchable)
> >>>> Memory window 1: 8c000000-8ffff000
> >>>> I/O window 0: 0000d000-0000d0ff
> >>>> I/O window 1: 0000d400-0000d4ff
> >>>> 16-bit legacy interface ports at 0001
> >>>>
> >>>> 04:01.1 0c00: 1180:0552 (rev 08) (prog-if 10 [OHCI])
> >>>> Subsystem: 1043:1237
> >>>> Flags: bus master, medium devsel, latency 64, IRQ 19
> >>>> Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
> >>>> Capabilities: [dc] Power Management version 2
> >>>>
> >>>> 04:01.2 0805: 1180:0822 (rev 17)
> >>>> Subsystem: 1043:1237
> >>>> Flags: bus master, medium devsel, latency 64, IRQ 17
> >>>> Memory at feaff400 (32-bit, non-prefetchable) [size%6]
> >>>> Capabilities: [80] Power Management version 2
> >>>>
> >>>> 04:01.3 0880: 1180:0592 (rev 08)
> >>>> Subsystem: 1043:1237
> >>>> Flags: medium devsel, IRQ 5
> >>>> Memory at feaff000 (32-bit, non-prefetchable) [size%6]
> >>>> Capabilities: [80] Power Management version 2
> >>>>
> >>>>
> >>>> --
> >>>> () ascii ribbon campaign - against html e-mail
> >>>> /\ www.asciiribbon.org - against proprietary attachments
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> lm-sensors mailing list
> >>>> lm-sensors@lm-sensors.org
> >>>> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
> >>>>
> >>>
> >>
> >> --
> >> () ascii ribbon campaign - against html e-mail
> >> /\ www.asciiribbon.org - against proprietary attachments
> >>
> >>
>
>
> --
> () ascii ribbon campaign - against html e-mail
> /\ www.asciiribbon.org - against proprietary attachments
>
>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [lm-sensors] Hardware monitoring on Asus A6JM laptop
2007-08-03 20:53 [lm-sensors] Hardware monitoring on Asus A6JM laptop Firas Kraiem
` (4 preceding siblings ...)
2007-08-04 16:44 ` Juerg Haefliger
@ 2007-08-04 16:52 ` Firas Kraiem
2007-08-04 20:09 ` Rudolf Marek
` (3 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Firas Kraiem @ 2007-08-04 16:52 UTC (permalink / raw)
To: lm-sensors
Hi,
Here's the output of requested commands :
firas@Ana ~ $ sudo lspci -nnvv
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS/940GML
and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSELúst >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS/940GML
and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSELúst >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary\0, secondary\x01, subordinate\x01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f9f00000-fdffffff
Prefetchable memory behind bridge: 00000000bdf00000-00000000ddefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSELúst >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [88] Subsystem: Intel Corporation Mobile
945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port [8086:27a1]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [a0] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1,
Port 2
Link: Latency L0s <256ns, L1 <4us
Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x16
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug-
Surpise-
Slot: Number 0, PowerLimit 0.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1123]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSELúst >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at febfc000 (64-bit, non-prefetchable) [size\x16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrentUmA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express Unknown type IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed unknown, Width x0, ASPM unknown,
Port 0
Link: Latency L0s <64ns, L1 <1us
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed unknown, Width x0
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSELúst >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary\0, secondary\x02, subordinate\x02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe000000-fe0fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSELúst >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+
Surpise+
Slot: Number 0, PowerLimit 0.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7
Family) PCI Express Port 1 [8086:27d0]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSELúst >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary\0, secondary\x03, subordinate\x03, sec-latency=0
Memory behind bridge: fe100000-fe1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSELúst >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+
Surpise+
Slot: Number 0, PowerLimit 0.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7
Family) PCI Express Port 4 [8086:27d6]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at ec00 [size2]
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at e880 [size2]
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at e800 [size2]
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 22
Region 4: I/O ports at e480 [size2]
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent75mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSELúst >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary\0, secondary\x04, subordinate\b, sec-latency2
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe200000-feafffff
Prefetchable memory behind bridge: 00000000ddf00000-00000000dfefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Subsystem: Intel Corporation 82801 Mobile PCI
Bridge [8086:2448]
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC
Interface Bridge [8086:27b9] (rev 02)
Subsystem: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size\x16]
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus
Controller [8086:27da] (rev 02)
Subsystem: Intel Corporation 82801G (ICH7 Family) SMBus
Controller [8086:27da]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0400 [size2]
01:00.0 VGA compatible controller [0300]: nVidia Corporation G70
[GeForce Go 7600] [10de:0398] (rev a1) (prog-if 00 [VGA])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1232]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSELúst >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size\x16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size%6M]
Region 3: Memory at fc000000 (64-bit, non-prefetchable) [size\x16M]
Region 5: I/O ports at bc00 [size\x128]
[virtual] Expansion ROM at fbfe0000 [disabled] [size\x128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s <256ns, L1 <4us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1,
Port 0
Link: Latency L0s <256ns, L1 <4us
Link: ASPM L0s L1 Enabled RCB 128 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x16
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
Unknown device [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:11f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSELúst >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at c800 [size%6]
Region 2: Memory at fe0ff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fe0e0000 [disabled] [sizedK]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent75mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
Queue=0/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] Express Endpoint IRQ 0
Device: Supported: MaxPayload 1024 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: AtnBtn+ AtnInd+ PwrInd+
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Capabilities: [84] Vendor Specific Information
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless
3945ABG Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation Unknown device [8086:1001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSELúst >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fe1ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [e0] Express Legacy Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
Device: Latency L0s <512ns, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
Link: Latency L0s <128ns, L1 <64us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x1
04:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe200000 (32-bit, non-prefetchable) [size=4K]
Bus: primary\x04, secondary\x05, subordinate\b, sec-latency\x176
Memory window 0: 88000000-8bfff000 (prefetchable)
Memory window 1: 8c000000-8ffff000
I/O window 0: 0000d000-0000d0ff
I/O window 1: 0000d400-0000d4ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+
PostWrite+
16-bit legacy interface ports at 0001
04:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394
Controller [1180:0552] (rev 08) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 19
Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME+
04:01.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822
SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin C routed to IRQ 17
Region 0: Memory at feaff400 (32-bit, non-prefetchable) [size%6]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
04:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus
Host Adapter [1180:0592] (rev 08)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 5
Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size%6]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
firas@Ana ~ $ sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +58 C (high = +100 C)
coretemp-isa-0001
Adapter: ISA adapter
Core 1: +56 C (high = +100 C)
adt7463-i2c-3-2e
Adapter: SMBus I801 adapter at 0400
V1.5: +0.000 V (min = +0.00 V, max = +3.32 V)
VCore: +0.946 V (min = +0.00 V, max = +2.99 V)
V3.3: +3.266 V (min = +0.00 V, max = +4.38 V)
V5: +0.085 V (min = +0.00 V, max = +6.64 V)
V12: +0.000 V (min = +0.00 V, max = +15.94 V) ALARM
CPU_Fan: 2126 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
CPU Temp: +64.00 C (low = -127 C, high = +127 C)
Board Temp:
+55.50 C (low = -127 C, high = +127 C)
Remote Temp:
+63.50 C (low = -127 C, high = +127 C)
CPU_PWM: 88
Fan2_PWM: 88
Fan3_PWM: 88
vid: +1.500 V (VRM Version 1.4)
Juerg Haefliger wrote:
> Hi Firas,
>
>
>> Hi Juerg,
>>
>> It went flawlessly :) After I patched and recompiled the kernel and
>> rebooted, sensors-detect detected my SMBus just fine.
>
> Very good! Could you please send the lspci -nnvv and sensors output?
> Now we just need to get the patch into mainline...
>
> ...juerg
>
>
>> Thanks for the help !
>>
>> Firas
>>
>> Juerg Haefliger wrote:
>>> Hi Firas,
>>>
>>> So you have an ICH7 and the SMBus controller is clearly disabled. It's
>>> supposed to be device 00.1f.3 but it doesn't show up under lspci.
>>> You're only chance is to patch the kernel an recompile. Do you feel
>>> lucky today? :-)
>>>
>>> Try the attached patch, recompile the kernel, install it, reboot, run
>>> lspci and check if you can see the SMBus controller. I believe dmesg
>>> should spit out some messages if a pci quirk is applied during the
>>> boot process.
>>>
>>> Let us know how it goes.
>>>
>>> ...juerg
>>>
>>>
>>>
>>>
>>> On 8/3/07, Firas Kraiem <fkraiem@free.fr> wrote:
>>>> Here goes :)
>>>>
>>>>
>>>> 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS/940GML
>>>> and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
>>>> 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS/940GML
>>>> and 945GT Express PCI Express Root Port [8086:27a1] (rev 03)
>>>> 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
>>>> Definition Audio Controller [8086:27d8] (rev 02)
>>>> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
>>>> Express Port 1 [8086:27d0] (rev 02)
>>>> 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
>>>> Express Port 4 [8086:27d6] (rev 02)
>>>> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
>>>> USB UHCI #1 [8086:27c8] (rev 02)
>>>> 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
>>>> USB UHCI #2 [8086:27c9] (rev 02)
>>>> 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
>>>> USB UHCI #3 [8086:27ca] (rev 02)
>>>> 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
>>>> USB UHCI #4 [8086:27cb] (rev 02)
>>>> 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
>>>> USB2 EHCI Controller [8086:27cc] (rev 02)
>>>> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
>>>> [8086:2448] (rev e2)
>>>> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC
>>>> Interface Bridge [8086:27b9] (rev 02)
>>>> 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
>>>> Controller [8086:27df] (rev 02)
>>>> 01:00.0 VGA compatible controller [0300]: nVidia Corporation G70
>>>> [GeForce Go 7600] [10de:0398] (rev a1)
>>>> 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
>>>> Unknown device [10ec:8168] (rev 01)
>>>> 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless
>>>> 3945ABG Network Connection [8086:4222] (rev 02)
>>>> 04:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
>>>> 04:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394
>>>> Controller [1180:0552] (rev 08)
>>>> 04:01.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822
>>>> SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17)
>>>> 04:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus
>>>> Host Adapter [1180:0592] (rev 08)
>>>>
>>>>
>>>> Juerg Haefliger wrote:
>>>>> Hi Firas,
>>>>>
>>>>> Could you also send the output of 'lspci -nn'.
>>>>>
>>>>> ...juerg
>>>>>
>>>>>
>>>>>
>>>>> On 8/3/07, Firas Kraiem <fkraiem@free.fr> wrote:
>>>>>> Greetings
>>>>>>
>>>>>> A while ago, I posted a message to the list about getting hardware
>>>>>> monitoring to work on my Asus laptop :
>>>>>>
>>>>>> http://lists.lm-sensors.org/pipermail/lm-sensors/2006-October/018031.html
>>>>>>
>>>>>> Due to various issues, I haven't been able to deal with the issue
>>>>>> further. However, if someone could point me to the right direction about
>>>>>> re-enabling my SMBus, it would be much appreciated. The output of lspci
>>>>>> -vn follows.
>>>>>>
>>>>>> Regards,
>>>>>> Firas
>>>>>>
>>>>>>
>>>>>> 00:00.0 0600: 8086:27a0 (rev 03)
>>>>>> Subsystem: 1043:1237
>>>>>> Flags: bus master, fast devsel, latency 0
>>>>>> Capabilities: [e0] Vendor Specific Information
>>>>>>
>>>>>> 00:01.0 0604: 8086:27a1 (rev 03) (prog-if 00 [Normal decode])
>>>>>> Flags: bus master, fast devsel, latency 0
>>>>>> Bus: primary\0, secondary\x01, subordinate\x01, sec-latency=0
>>>>>> I/O behind bridge: 0000b000-0000bfff
>>>>>> Memory behind bridge: f9f00000-fdffffff
>>>>>> Prefetchable memory behind bridge: 00000000bdf00000-00000000ddefffff
>>>>>> Capabilities: [88] Subsystem: 8086:27a1
>>>>>> Capabilities: [80] Power Management version 2
>>>>>> Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
>>>>>> Queue=0/0 Enable-
>>>>>> Capabilities: [a0] Express Root Port (Slot+) IRQ 0
>>>>>>
>>>>>> 00:1b.0 0403: 8086:27d8 (rev 02)
>>>>>> Subsystem: 1043:1123
>>>>>> Flags: bus master, fast devsel, latency 0, IRQ 22
>>>>>> Memory at febfc000 (64-bit, non-prefetchable) [size\x16K]
>>>>>> Capabilities: [50] Power Management version 2
>>>>>> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
>>>>>> Queue=0/0 Enable-
>>>>>> Capabilities: [70] Express Unknown type IRQ 0
>>>>>>
>>>>>> 00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode])
>>>>>> Flags: bus master, fast devsel, latency 0
>>>>>> Bus: primary\0, secondary\x02, subordinate\x02, sec-latency=0
>>>>>> I/O behind bridge: 0000c000-0000cfff
>>>>>> Memory behind bridge: fe000000-fe0fffff
>>>>>> Capabilities: [40] Express Root Port (Slot+) IRQ 0
>>>>>> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
>>>>>> Queue=0/0 Enable-
>>>>>> Capabilities: [90] Subsystem: 8086:27d0
>>>>>> Capabilities: [a0] Power Management version 2
>>>>>>
>>>>>> 00:1c.3 0604: 8086:27d6 (rev 02) (prog-if 00 [Normal decode])
>>>>>> Flags: bus master, fast devsel, latency 0
>>>>>> Bus: primary\0, secondary\x03, subordinate\x03, sec-latency=0
>>>>>> Memory behind bridge: fe100000-fe1fffff
>>>>>> Capabilities: [40] Express Root Port (Slot+) IRQ 0
>>>>>> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
>>>>>> Queue=0/0 Enable-
>>>>>> Capabilities: [90] Subsystem: 8086:27d6
>>>>>> Capabilities: [a0] Power Management version 2
>>>>>>
>>>>>> 00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI])
>>>>>> Subsystem: 1043:1237
>>>>>> Flags: bus master, medium devsel, latency 0, IRQ 20
>>>>>> I/O ports at ec00 [size2]
>>>>>>
>>>>>> 00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI])
>>>>>> Subsystem: 1043:1237
>>>>>> Flags: bus master, medium devsel, latency 0, IRQ 17
>>>>>> I/O ports at e880 [size2]
>>>>>>
>>>>>> 00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI])
>>>>>> Subsystem: 1043:1237
>>>>>> Flags: bus master, medium devsel, latency 0, IRQ 19
>>>>>> I/O ports at e800 [size2]
>>>>>>
>>>>>> 00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI])
>>>>>> Subsystem: 1043:1237
>>>>>> Flags: bus master, medium devsel, latency 0, IRQ 21
>>>>>> I/O ports at e480 [size2]
>>>>>>
>>>>>> 00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI])
>>>>>> Subsystem: 1043:1237
>>>>>> Flags: bus master, medium devsel, latency 0, IRQ 20
>>>>>> Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
>>>>>> Capabilities: [50] Power Management version 2
>>>>>> Capabilities: [58] Debug port
>>>>>>
>>>>>> 00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode])
>>>>>> Flags: bus master, fast devsel, latency 0
>>>>>> Bus: primary\0, secondary\x04, subordinate\b, sec-latency2
>>>>>> I/O behind bridge: 0000d000-0000dfff
>>>>>> Memory behind bridge: fe200000-feafffff
>>>>>> Prefetchable memory behind bridge: 00000000ddf00000-00000000dfefffff
>>>>>> Capabilities: [50] Subsystem: 8086:2448
>>>>>>
>>>>>> 00:1f.0 0601: 8086:27b9 (rev 02)
>>>>>> Subsystem: 8086:27b9
>>>>>> Flags: bus master, medium devsel, latency 0
>>>>>> Capabilities: [e0] Vendor Specific Information
>>>>>>
>>>>>> 00:1f.1 0101: 8086:27df (rev 02) (prog-if 8a [Master SecP PriP])
>>>>>> Subsystem: 1043:1237
>>>>>> Flags: bus master, medium devsel, latency 0, IRQ 19
>>>>>> I/O ports at 01f0 [size=8]
>>>>>> I/O ports at 03f4 [size=1]
>>>>>> I/O ports at 0170 [size=8]
>>>>>> I/O ports at 0374 [size=1]
>>>>>> I/O ports at ffa0 [size\x16]
>>>>>>
>>>>>> 01:00.0 0300: 10de:0398 (rev a1) (prog-if 00 [VGA])
>>>>>> Subsystem: 1043:1232
>>>>>> Flags: bus master, fast devsel, latency 0, IRQ 16
>>>>>> Memory at fd000000 (32-bit, non-prefetchable) [size\x16M]
>>>>>> Memory at c0000000 (64-bit, prefetchable) [size%6M]
>>>>>> Memory at fc000000 (64-bit, non-prefetchable) [size\x16M]
>>>>>> I/O ports at bc00 [size\x128]
>>>>>> [virtual] Expansion ROM at fbfe0000 [disabled] [size\x128K]
>>>>>> Capabilities: [60] Power Management version 2
>>>>>> Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+
>>>>>> Queue=0/0 Enable-
>>>>>> Capabilities: [78] Express Endpoint IRQ 0
>>>>>>
>>>>>> 02:00.0 0200: 10ec:8168 (rev 01)
>>>>>> Subsystem: 1043:11f5
>>>>>> Flags: bus master, fast devsel, latency 0, IRQ 16
>>>>>> I/O ports at c800 [size%6]
>>>>>> Memory at fe0ff000 (64-bit, non-prefetchable) [size=4K]
>>>>>> Expansion ROM at fe0e0000 [disabled] [sizedK]
>>>>>> Capabilities: [40] Power Management version 2
>>>>>> Capabilities: [48] Vital Product Data
>>>>>> Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
>>>>>> Queue=0/1 Enable-
>>>>>> Capabilities: [60] Express Endpoint IRQ 0
>>>>>> Capabilities: [84] Vendor Specific Information
>>>>>>
>>>>>> 03:00.0 0280: 8086:4222 (rev 02)
>>>>>> Subsystem: 8086:1001
>>>>>> Flags: bus master, fast devsel, latency 0, IRQ 5
>>>>>> Memory at fe1ff000 (32-bit, non-prefetchable) [size=4K]
>>>>>> Capabilities: [c8] Power Management version 2
>>>>>> Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
>>>>>> Queue=0/0 Enable-
>>>>>> Capabilities: [e0] Express Legacy Endpoint IRQ 0
>>>>>>
>>>>>> 04:01.0 0607: 1180:0476 (rev b3)
>>>>>> Subsystem: 1043:1237
>>>>>> Flags: bus master, medium devsel, latency 168, IRQ 18
>>>>>> Memory at fe200000 (32-bit, non-prefetchable) [size=4K]
>>>>>> Bus: primary\x04, secondary\x05, subordinate\b, sec-latency\x176
>>>>>> Memory window 0: 88000000-8bfff000 (prefetchable)
>>>>>> Memory window 1: 8c000000-8ffff000
>>>>>> I/O window 0: 0000d000-0000d0ff
>>>>>> I/O window 1: 0000d400-0000d4ff
>>>>>> 16-bit legacy interface ports at 0001
>>>>>>
>>>>>> 04:01.1 0c00: 1180:0552 (rev 08) (prog-if 10 [OHCI])
>>>>>> Subsystem: 1043:1237
>>>>>> Flags: bus master, medium devsel, latency 64, IRQ 19
>>>>>> Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
>>>>>> Capabilities: [dc] Power Management version 2
>>>>>>
>>>>>> 04:01.2 0805: 1180:0822 (rev 17)
>>>>>> Subsystem: 1043:1237
>>>>>> Flags: bus master, medium devsel, latency 64, IRQ 17
>>>>>> Memory at feaff400 (32-bit, non-prefetchable) [size%6]
>>>>>> Capabilities: [80] Power Management version 2
>>>>>>
>>>>>> 04:01.3 0880: 1180:0592 (rev 08)
>>>>>> Subsystem: 1043:1237
>>>>>> Flags: medium devsel, IRQ 5
>>>>>> Memory at feaff000 (32-bit, non-prefetchable) [size%6]
>>>>>> Capabilities: [80] Power Management version 2
>>>>>>
>>>>>>
>>>>>> --
>>>>>> () ascii ribbon campaign - against html e-mail
>>>>>> /\ www.asciiribbon.org - against proprietary attachments
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> lm-sensors mailing list
>>>>>> lm-sensors@lm-sensors.org
>>>>>> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>>>>>>
>>>> --
>>>> () ascii ribbon campaign - against html e-mail
>>>> /\ www.asciiribbon.org - against proprietary attachments
>>>>
>>>>
>>
>> --
>> () ascii ribbon campaign - against html e-mail
>> /\ www.asciiribbon.org - against proprietary attachments
>>
>>
>
>
--
() ascii ribbon campaign - against html e-mail
/\ www.asciiribbon.org - against proprietary attachments
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [lm-sensors] Hardware monitoring on Asus A6JM laptop
2007-08-03 20:53 [lm-sensors] Hardware monitoring on Asus A6JM laptop Firas Kraiem
` (5 preceding siblings ...)
2007-08-04 16:52 ` Firas Kraiem
@ 2007-08-04 20:09 ` Rudolf Marek
2007-08-05 8:18 ` christophe
` (2 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Rudolf Marek @ 2007-08-04 20:09 UTC (permalink / raw)
To: lm-sensors
Hi all,
I dont think it is a good idea to enable the SMbus when they disable it. It has
the the chip ADT7463 which servers as thermal control for whole notebook. The
chip is in automatic mode. Fan full at 90C. Fans stop at 55C.
Perhaps ACPI methods poke with that chip too. First it must be check if they do!
If so, the access must not be allowed!
Rudolf
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [lm-sensors] Hardware monitoring on Asus A6JM laptop
2007-08-03 20:53 [lm-sensors] Hardware monitoring on Asus A6JM laptop Firas Kraiem
` (6 preceding siblings ...)
2007-08-04 20:09 ` Rudolf Marek
@ 2007-08-05 8:18 ` christophe
2007-08-05 8:41 ` Rudolf Marek
2007-08-05 8:43 ` Rudolf Marek
9 siblings, 0 replies; 11+ messages in thread
From: christophe @ 2007-08-05 8:18 UTC (permalink / raw)
To: lm-sensors
[-- Attachment #1.1: Type: text/plain, Size: 590 bytes --]
Le samedi 4 août 2007 22:09, Rudolf Marek a écrit :
> Hi all,
>
> I dont think it is a good idea to enable the SMbus when they disable it. It
> has the the chip ADT7463 which servers as thermal control for whole
> notebook. The chip is in automatic mode. Fan full at 90C. Fans stop at 55C.
>
> Perhaps ACPI methods poke with that chip too. First it must be check if
> they do! If so, the access must not be allowed!
>
> Rudolf
Yes it's almost the same chip on asus w1n laptop :
http://lists.lm-sensors.org/pipermail/lm-sensors/2007-January/018672.html
--
christophe
[-- Attachment #1.2: Type: application/pgp-signature, Size: 189 bytes --]
[-- Attachment #2: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [lm-sensors] Hardware monitoring on Asus A6JM laptop
2007-08-03 20:53 [lm-sensors] Hardware monitoring on Asus A6JM laptop Firas Kraiem
` (7 preceding siblings ...)
2007-08-05 8:18 ` christophe
@ 2007-08-05 8:41 ` Rudolf Marek
2007-08-05 8:43 ` Rudolf Marek
9 siblings, 0 replies; 11+ messages in thread
From: Rudolf Marek @ 2007-08-05 8:41 UTC (permalink / raw)
To: lm-sensors
Please can you send a dsdt.bin
cat /proc/acpi/dsdt > /tmp/dsdt.bin
and also cat /proc/ioports
(when SMBus driver is loaded)
Thanks,
Rudolf
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [lm-sensors] Hardware monitoring on Asus A6JM laptop
2007-08-03 20:53 [lm-sensors] Hardware monitoring on Asus A6JM laptop Firas Kraiem
` (8 preceding siblings ...)
2007-08-05 8:41 ` Rudolf Marek
@ 2007-08-05 8:43 ` Rudolf Marek
9 siblings, 0 replies; 11+ messages in thread
From: Rudolf Marek @ 2007-08-05 8:43 UTC (permalink / raw)
To: lm-sensors
Please can you send a dsdt.bin
cat /proc/acpi/dsdt > /tmp/dsdt.bin
and also cat /proc/ioports
(when SMBus driver is loaded)
Thanks,
Rudolf
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 11+ messages in thread