* dmesg
@ 2007-10-04 1:53 Michael Sicher
2007-10-04 17:44 ` dmesg Len Brown
0 siblings, 1 reply; 6+ messages in thread
From: Michael Sicher @ 2007-10-04 1:53 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: Type: text/plain, Size: 217 bytes --]
Hello
This is the content after a dmesg. (Attachment) Somewhere I were pleased
to send you this...I hope you will help me eliminate those errors...
michael.sicher@stud.unibas.ch
Fasanenstrasse 7
4153 REINACH BL
CH
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 31230 bytes --]
[michi@localhost ~]$ sudo dmesg
Password:
Linux version 2.6.22.9-91.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc v
ersion 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Thu Sep 27 20:47:39 EDT 2007
Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe8cc00 (usable)
BIOS-e820: 000000007fe8cc00 - 000000007fe8ec00 (ACPI NVS)
BIOS-e820: 000000007fe8ec00 - 000000007fe90c00 (ACPI data)
BIOS-e820: 000000007fe90c00 - 0000000080000000 (reserved)
BIOS-e820: 00000000d0000000 - 00000000d4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 160) 0 entries of 3200 used
Entering add_active_range(0, 256, 523916) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP 000FEB00, 0024 (r2 DELL )
ACPI: XSDT 000FD25F, 005C (r1 DELL DXP051 7 ASL 61)
ACPI: FACP 000FD357, 00F4 (r3 DELL DXP051 7 ASL 61)
ACPI: DSDT FFFC7B7D, 32B9 (r1 DELL dt_ex 1000 INTL 20050309)
ACPI: FACS 7FE8CC00, 0040
ACPI: SSDT FFFCAF57, 00AC (r1 DELL st_ex 1000 INTL 20050309)
ACPI: APIC 000FD44B, 0072 (r1 DELL DXP051 7 ASL 61)
ACPI: BOOT 000FD4BD, 0028 (r1 DELL DXP051 7 ASL 61)
ACPI: ASF! 000FD4E5, 0067 (r16 DELL DXP051 7 ASL 61)
ACPI: MCFG 000FD54C, 003E (r1 DELL DXP051 7 ASL 61)
ACPI: HPET 000FD58A, 0038 (r1 DELL DXP051 7 ASL 61)
No NUMA configuration found
Faking a node at 0000000000000000-000000007fe8c000
Entering add_active_range(0, 0, 160) 0 entries of 3200 used
Entering add_active_range(0, 256, 523916) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000007fe8c000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 160
0: 256 -> 523916
On node 0 totalpages: 523820
DMA zone: 56 pages used for memmap
DMA zone: 1300 pages reserved
DMA zone: 2644 pages, LIFO batch:0
DMA32 zone: 7106 pages used for memmap
DMA32 zone: 512714 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:50000000)
SMP: Allowing 4 CPUs, 2 hotplug CPUs
PERCPU: Allocating 40968 bytes of per cpu data
Built 1 zonelists. Total pages: 515358
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 3391.586 MHz processor.
Console: colour VGA+ 80x25
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2057260k/2095664k available (2362k kernel code, 38020k reserved, 1400k d
ata, 312k init)
SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
Calibrating delay using timer specific routine.. 6787.61 BogoMIPS (lpj=3393808)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU 0/0 -> Node 0
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 12468987
Detected 12.468 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 6783.18 BogoMIPS (lpj=3391590)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Pentium(R) D CPU 3.40GHz stepping 04
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=208 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2048 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMC
ONFIG support.
PCI: Using MMCONFIG at d0000000 - d3ffffff
ACPI: System BIOS is requesting _OSI(Linux)
ACPI: Please test with "acpi_osi=!Linux"
Please send dmidecode to linux-acpi@vger.kernel.org
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
pnp: 00:01: ioport range 0x800-0x85f has been reserved
pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
pnp: 00:01: ioport range 0x860-0x8ff has been reserved
pnp: 00:06: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:06: iomem range 0x100000-0xffffff could not be reserved
pnp: 00:06: iomem range 0x1000000-0x7fe8cbff could not be reserved
pnp: 00:06: iomem range 0xf0000-0xfffff could not be reserved
pnp: 00:07: ioport range 0x100-0x1fe could not be reserved
pnp: 00:07: ioport range 0x200-0x277 has been reserved
pnp: 00:07: ioport range 0x280-0x2e7 has been reserved
pnp: 00:07: ioport range 0x2e8-0x2ef has been reserved
pnp: 00:07: ioport range 0x2f0-0x2f7 has been reserved
pnp: 00:07: ioport range 0x2f8-0x2ff has been reserved
pnp: 00:07: ioport range 0x300-0x377 could not be reserved
pnp: 00:07: ioport range 0x380-0x3bb has been reserved
pnp: 00:07: iomem range 0xd0000000-0xd3ffffff could not be reserved
pnp: 00:07: iomem range 0xfeda0000-0xfedacfff has been reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: fc000000-feafffff
PREFETCH window: e0000000-efffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: fbf00000-fbffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
IO window: c000-cfff
MEM window: fb800000-fbefffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: b000-bfff
MEM window: f4000000-fb7fffff
PREFETCH window: f0000000-f3ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3777k freed
Simple Boot Flag at 0x7a set to 0x1
audit: initializing netlink socket (disabled)
audit(1191467297.460:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key F49647332066F9
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
Allocate Port Service[0000:00:1c.4:pcie03]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
Allocate Port Service[0000:00:1c.5:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not pres
ent [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not pres
ent [20070126]
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 312k freed
Write protecting the kernel read-only data: 1060k
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using uhci_hcd and address 2
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
SCSI subsystem initialized
libata version 2.21 loaded.
ata_piix 0000:00:1f.1: version 2.11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00
0000000001ffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00
0000000001ffa8 irq 15
usb 1-1: device not accepting address 2, error -71
ata1.00: ATAPI: HL-DT-STDVD+-RW GSA-H21N, A105, max UDMA/33
ata1.00: configured for UDMA/33
ata2: port disabled. ignoring.
scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H21N A105 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x000000000001fe00 ctl 0x000000000001fe12 bmdma 0x00
0000000001fea0 irq 20
ata4: SATA max UDMA/133 cmd 0x000000000001fe20 ctl 0x000000000001fe32 bmdma 0x00
0000000001fea8 irq 20
ata3.00: ATA-7: WDC WD2500JS-75NCB3, 10.02E04, max UDMA/133
ata3.00: 488281250 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata3.01: ATA-7: WDC WD2500JS-75NCB3, 10.02E04, max UDMA/133
ata3.01: 488281250 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata3.01: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
scsi 2:0:1:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5
sd 2:0:1:0: [sdb] 488281250 512-byte hardware sectors (250000 MB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 2:0:1:0: [sdb] 488281250 512-byte hardware sectors (250000 MB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sdb: sdb1 sdb2 sdb3
sd 2:0:1:0: [sdb] Attached SCSI disk
usb 5-2: new high speed USB device using ehci_hcd and address 3
usb 5-2: configuration #1 chosen from 1 choice
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 4 ports detected
usb 5-3: new high speed USB device using ehci_hcd and address 4
usb 5-3: configuration #1 chosen from 1 choice
usb 5-5: new high speed USB device using ehci_hcd and address 6
usb 5-5: configuration #1 chosen from 1 choice
hub 5-5:1.0: USB hub found
hub 5-5:1.0: 4 ports detected
usb 1-1: new low speed USB device using uhci_hcd and address 4
usb 1-1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /class/input/input1
input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1
usb 5-2.1: new high speed USB device using ehci_hcd and address 8
usb 5-2.1: configuration #1 chosen from 1 choice
usb 5-2.2: new high speed USB device using ehci_hcd and address 9
Initializing USB Mass Storage driver...
usb 5-2.2: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 9
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usb 5-5.1: new low speed USB device using ehci_hcd and address 10
usb 5-5.1: configuration #1 chosen from 1 choice
input: Microsoft Microsoft USB Wireless Mouse as /class/input/input2
input: USB HID v1.11 Mouse [Microsoft Microsoft USB Wireless Mouse] on usb-0000:
00:1d.7-5.1
usb 5-5.3: new high speed USB device using ehci_hcd and address 11
usb 5-5.3: configuration #1 chosen from 1 choice
hub 5-5.3:1.0: USB hub found
hub 5-5.3:1.0: 4 ports detected
usb 3-2: new full speed USB device using uhci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 4 ports detected
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access HP Photosmart 2570 1.00 PQ: 0 ANSI: 2
usb-storage: device scan complete
scsi 5:0:0:0: Direct-Access HDS72251 6VLAT20 PQ: 0 ANSI: 0
sd 6:0:0:0: [sdc] Attached SCSI removable disk
sd 5:0:0:0: [sdd] 321672960 512-byte hardware sectors (164697 MB)
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 33 00 00 00
sd 5:0:0:0: [sdd] Assuming drive cache: write through
sd 5:0:0:0: [sdd] 321672960 512-byte hardware sectors (164697 MB)
usb-storage: device scan complete
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 33 00 00 00
sd 5:0:0:0: [sdd] Assuming drive cache: write through
sdd:<5>scsi 4:0:0:0: Direct-Access TEAC USB HS-CF Card 4.00 PQ: 0 ANS
I: 0
sdd1
sd 5:0:0:0: [sdd] Attached SCSI disk
scsi 4:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.00 PQ: 0 ANSI: 0
scsi 4:0:0:2: Direct-Access TEAC USB HS-MS Card 4.00 PQ: 0 ANSI: 0
scsi 4:0:0:3: Direct-Access TEAC USB HS-SD Card 4.00 PQ: 0 ANSI: 0
sd 4:0:0:0: [sde] Attached SCSI removable disk
sd 4:0:0:1: [sdf] Attached SCSI removable disk
sd 4:0:0:2: [sdg] Attached SCSI removable disk
sd 4:0:0:3: [sdh] Attached SCSI removable disk
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
audit(1191467316.487:2): enforcing=1 old_enforcing=0 auid=4294967295
security: 3 users, 6 roles, 1854 types, 84 bools, 1 sens, 1024 cats
security: 61 classes, 70584 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1191467316.811:3): policy loaded auid=4294967295
scsi 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:1:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: Attached scsi generic sg5 type 0
sd 4:0:0:1: Attached scsi generic sg6 type 0
sd 4:0:0:2: Attached scsi generic sg7 type 0
sd 4:0:0:3: Attached scsi generic sg8 type 0
sr0: scsi3-mmc drive: 94x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 9 if 1 alt 0 pr
oto 2 vid 0x03F0 pid 0x4E11
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Floppy drive(s): fd0 is 1.44M
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
Linux video capture interface: v2.00
ivtv: ==================== START INIT IVTV ====================
ivtv: version 1.0.0 (2.6.22.9-91.fc7 SMP mod_unload ) loading
ivtv0: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:05:05.0[A] -> GSI 17 (level, low) -> IRQ 17
ctossrv: module license 'Creative Proprietary License' taints kernel.
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
emupia: Unknown symbol InterlockedIncrement
emupia: Unknown symbol heap_alloc
emupia: Unknown symbol stack_free_page
emupia: Unknown symbol stack_alloc
emupia: Unknown symbol get_ossrv
emupia: Unknown symbol unload_all_plugins
emupia: Unknown symbol stack_alloc_page
emupia: Unknown symbol ioctl_dispatch
emupia: Unknown symbol heap_free
emupia: Unknown symbol InterlockedDecrement
emupia: Unknown symbol stack_free
ctsfman: Unknown symbol heap_alloc
ctsfman: Unknown symbol get_ossrv
ctsfman: Unknown symbol ioctl_dispatch
ctsfman: Unknown symbol heap_free
ct20xut: Unknown symbol InterlockedIncrement
ct20xut: Unknown symbol heap_alloc
ct20xut: Unknown symbol unregister_plugin
ct20xut: Unknown symbol heap_free
ct20xut: Unknown symbol register_plugin
ct20xut: Unknown symbol InterlockedDecrement
ivtv0: unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
ivtv0: did you put the firmware in the hotplug firmware directory?
ivtv0: Retry loading firmware
ctexfifx: Unknown symbol InterlockedDecrement
ctexfifx: Unknown symbol register_plugin
ctexfifx: Unknown symbol unregister_plugin
ctexfifx: Unknown symbol heap_alloc
ctexfifx: Unknown symbol InterlockedIncrement
ctexfifx: Unknown symbol heap_free
cthwiut: Unknown symbol InterlockedIncrement
cthwiut: Unknown symbol heap_alloc
cthwiut: Unknown symbol unregister_plugin
cthwiut: Unknown symbol heap_free
cthwiut: Unknown symbol register_plugin
cthwiut: Unknown symbol InterlockedDecrement
haxfi: Unknown symbol InterlockedDecrement
haxfi: Unknown symbol get_ossrv
haxfi: Unknown symbol heap_alloc
haxfi: Unknown symbol InterlockedIncrement
haxfi: Unknown symbol heap_free
ctalsa: Unknown symbol bytes_to_order
ctalsa: Unknown symbol get_ossrv
ctalsa: Unknown symbol heap_alloc
ctalsa: Unknown symbol malloc_sizes
ctalsa: Unknown symbol ioctl_dispatch
ctalsa: Unknown symbol heap_free
ivtv0: unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
ivtv0: did you put the firmware in the hotplug firmware directory?
ivtv0: Error initializing firmware
ivtv0: Error -19 on initialization
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:04:00.0 to 64
ivtv: ==================== END INIT IVTV ====================
e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:13:72:2c:ba:
25
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 P
DT 2007
usbcore: registered new interface driver snd-usb-audio
emupia: Unknown symbol InterlockedIncrement
emupia: Unknown symbol heap_alloc
emupia: Unknown symbol stack_free_page
emupia: Unknown symbol stack_alloc
emupia: Unknown symbol get_ossrv
emupia: Unknown symbol unload_all_plugins
emupia: Unknown symbol stack_alloc_page
emupia: Unknown symbol ioctl_dispatch
emupia: Unknown symbol heap_free
emupia: Unknown symbol InterlockedDecrement
emupia: Unknown symbol stack_free
ctsfman: Unknown symbol heap_alloc
ctsfman: Unknown symbol get_ossrv
ctsfman: Unknown symbol ioctl_dispatch
ctsfman: Unknown symbol heap_free
ct20xut: Unknown symbol InterlockedIncrement
ct20xut: Unknown symbol heap_alloc
ct20xut: Unknown symbol unregister_plugin
ct20xut: Unknown symbol heap_free
ct20xut: Unknown symbol register_plugin
ct20xut: Unknown symbol InterlockedDecrement
ctexfifx: Unknown symbol InterlockedDecrement
ctexfifx: Unknown symbol register_plugin
ctexfifx: Unknown symbol unregister_plugin
ctexfifx: Unknown symbol heap_alloc
ctexfifx: Unknown symbol InterlockedIncrement
ctexfifx: Unknown symbol heap_free
cthwiut: Unknown symbol InterlockedIncrement
cthwiut: Unknown symbol heap_alloc
cthwiut: Unknown symbol unregister_plugin
cthwiut: Unknown symbol heap_free
cthwiut: Unknown symbol register_plugin
cthwiut: Unknown symbol InterlockedDecrement
haxfi: Unknown symbol InterlockedDecrement
haxfi: Unknown symbol get_ossrv
haxfi: Unknown symbol heap_alloc
haxfi: Unknown symbol InterlockedIncrement
haxfi: Unknown symbol heap_free
ctalsa: Unknown symbol bytes_to_order
ctalsa: Unknown symbol get_ossrv
ctalsa: Unknown symbol heap_alloc
ctalsa: Unknown symbol malloc_sizes
ctalsa: Unknown symbol ioctl_dispatch
ctalsa: Unknown symbol heap_free
floppy0: no floppy controllers found
Floppy drive(s): fd0 is 1.44M
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
floppy0: no floppy controllers found
No dock devices found.
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [VBTN]
device-mapper: multipath: version 1.0.5 loaded
usb 5-2.2: reset high speed USB device using ehci_hcd and address 9
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sdb1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:
2031608k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control:
RX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
audit(1191460174.540:4): audit_pid=2119 old=0 by auid=4294967295 subj=system_u:s
ystem_r:auditd_t:s0
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
ppdev: user-space parallel port driver
ppdev0: claim the port first
ppdev1: claim the port first
ppdev2: claim the port first
ppdev3: claim the port first
lp: driver loaded but no devices found
ppdev0: claim the port first
ppdev1: claim the port first
ppdev2: claim the port first
ppdev3: claim the port first
[michi@localhost ~]$
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: dmesg
2007-10-04 1:53 dmesg Michael Sicher
@ 2007-10-04 17:44 ` Len Brown
0 siblings, 0 replies; 6+ messages in thread
From: Len Brown @ 2007-10-04 17:44 UTC (permalink / raw)
To: Michael Sicher; +Cc: linux-acpi, yakui.zhao
On Wednesday 03 October 2007 21:53, Michael Sicher wrote:
> Hello
> This is the content after a dmesg. (Attachment) Somewhere I were pleased
> to send you this...I hope you will help me eliminate those errors...
Do you refer to these?
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
This is from Linux being too verbose about not finding processor #2 and #3,
which I agree we should fix, per bugzilla:
http://bugzilla.kernel.org/show_bug.cgi?id=8630
and I think Yakui will be putting a patch in that bug report soon.
If something isn't working, please point that out.
thanks,
-Len
^ permalink raw reply [flat|nested] 6+ messages in thread
* dmesg
@ 2006-09-23 16:44 Vincent Gentilcore
2006-09-25 9:42 ` dmesg Bernhard Walle
0 siblings, 1 reply; 6+ messages in thread
From: Vincent Gentilcore @ 2006-09-23 16:44 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 26 bytes --]
dmesg
Vincent Gentilcore
[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 22890 bytes --]
[ 0.000000] Linux version 2.6.18.230906 (root@vinnyduke-desktop) (gcc version 4.1.2 20060920 (prerelease) (Ubuntu 4.1.1-13ubuntu3)) #2 SMP Sat Sep 23 10:15:55 EDT 2006
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff40000 (usable)
[ 0.000000] BIOS-e820: 000000003ff40000 - 000000003ff50000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff50000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] On node 0 totalpages: 261952
[ 0.000000] DMA zone: 4096 pages, LIFO batch:0
[ 0.000000] Normal zone: 225280 pages, LIFO batch:31
[ 0.000000] HighMem zone: 32576 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x000fa580
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x07000612 MSFT 0x00000097) @ 0x3ff40000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x07000612 MSFT 0x00000097) @ 0x3ff40200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x07000612 MSFT 0x00000097) @ 0x3ff40300
[ 0.000000] ACPI: OEMB (v001 A M I OEMBIOS 0x07000612 MSFT 0x00000097) @ 0x3ff50040
[ 0.000000] ACPI: DSDT (v001 75i6G 75i6G242 0x00000242 INTL 0x02002026) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:6 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:6 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bed00000)
[ 0.000000] Detected 2999.918 MHz processor.
[ 17.449606] Built 1 zonelists. Total pages: 261952
[ 17.449610] Kernel command line: root=/dev/hda1 ro quiet locale=fr
[ 17.449785] mapped APIC to ffffd000 (fee00000)
[ 17.449787] mapped IOAPIC to ffffc000 (fec00000)
[ 17.449790] Enabling fast FPU save and restore... done.
[ 17.449793] Enabling unmasked SIMD FPU exception support... done.
[ 17.449796] Initializing CPU#0
[ 17.449858] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 17.453990] Console: colour VGA+ 80x25
[ 17.454320] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 17.454655] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 17.474644] Memory: 1027260k/1047808k available (2141k kernel code, 19856k reserved, 1358k data, 308k init, 130304k highmem)
[ 17.474648] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 17.533758] Calibrating delay using timer specific routine.. 6001.60 BogoMIPS (lpj=3000803)
[ 17.533792] Security Framework v1.0.0 initialized
[ 17.533796] SELinux: Disabled at boot.
[ 17.533810] Mount-cache hash table entries: 512
[ 17.533921] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e43d 00000000 00000001
[ 17.533931] CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000e43d 00000000 00000001
[ 17.533937] monitor/mwait feature present.
[ 17.533939] using mwait in idle threads.
[ 17.533946] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 17.533948] CPU: L2 cache: 2048K
[ 17.533951] CPU: Physical Processor ID: 0
[ 17.533952] CPU: Processor Core ID: 0
[ 17.533954] CPU: After all inits, caps: bfebfbff 20000000 00000000 00000180 0000e43d 00000000 00000001
[ 17.533963] Compat vDSO mapped to ffffe000.
[ 17.533976] Checking 'hlt' instruction... OK.
[ 17.537824] SMP alternatives: switching to UP code
[ 17.537944] ACPI: Core revision 20060707
[ 17.540082] CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02
[ 17.540090] SMP alternatives: switching to SMP code
[ 17.540118] Booting processor 1/1 eip 3000
[ 18.267557] Initializing CPU#1
[ 18.327549] Calibrating delay using timer specific routine.. 5998.54 BogoMIPS (lpj=2999271)
[ 18.327558] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e43d 00000000 00000001
[ 18.327565] CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000e43d 00000000 00000001
[ 18.327570] monitor/mwait feature present.
[ 18.327576] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 18.327578] CPU: L2 cache: 2048K
[ 18.327580] CPU: Physical Processor ID: 0
[ 18.327582] CPU: Processor Core ID: 1
[ 18.327583] CPU: After all inits, caps: bfebfbff 20000000 00000000 00000180 0000e43d 00000000 00000001
[ 17.611122] CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02
[ 17.611155] Total of 2 processors activated (12000.14 BogoMIPS).
[ 17.611280] ENABLING IO-APIC IRQs
[ 17.611435] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 17.722534] checking TSC synchronization across 2 CPUs:
[ 0.000002] CPU#0 had -358913 usecs TSC skew, fixed it up.
[ 0.000005] CPU#1 had 358913 usecs TSC skew, fixed it up.
[ 0.000997] Brought up 2 CPUs
[ 0.131938] migration_cost=1163
[ 0.132069] checking if image is initramfs... it is
[ 0.669101] Freeing initrd memory: 6531k freed
[ 0.669426] NET: Registered protocol family 16
[ 0.669511] EISA bus registered
[ 0.669516] ACPI: bus type pci registered
[ 0.669595] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[ 0.669601] PCI: Using configuration type 1
[ 0.669603] Setting up standard PCI resources
[ 0.682539] ACPI: Interpreter enabled
[ 0.682542] ACPI: Using IOAPIC for interrupt routing
[ 0.682998] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.683003] PCI: Probing PCI hardware (bus 00)
[ 0.686115] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 0.686119] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[ 0.686174] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[ 0.686413] Boot video device is 0000:01:00.0
[ 0.686588] PCI: Transparent bridge - 0000:00:1e.0
[ 0.686614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.688505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.693094] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.693341] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.693577] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.693815] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.694050] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.694295] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.694531] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.694768] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.694908] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.694918] pnp: PnP ACPI init
[ 0.698108] pnp: PnP ACPI: found 11 devices
[ 0.698116] PnPBIOS: Disabled by ACPI PNP
[ 0.698193] usbcore: registered new driver usbfs
[ 0.698229] usbcore: registered new driver hub
[ 0.698303] PCI: Using ACPI for IRQ routing
[ 0.698306] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.702914] pnp: 00:09: ioport range 0x290-0x29f has been reserved
[ 0.703193] PCI: Bridge: 0000:00:01.0
[ 0.703195] IO window: disabled.
[ 0.703200] MEM window: fa900000-fe9fffff
[ 0.703204] PREFETCH window: bff00000-dfefffff
[ 0.703208] PCI: Bridge: 0000:00:1e.0
[ 0.703211] IO window: b000-bfff
[ 0.703217] MEM window: fea00000-feafffff
[ 0.703220] PREFETCH window: disabled.
[ 0.703236] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.703264] NET: Registered protocol family 2
[ 0.714175] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.714313] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.714938] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.715257] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.715260] TCP reno registered
[ 0.716526] audit: initializing netlink socket (disabled)
[ 0.716540] audit(1159014889.184:1): initialized
[ 0.716649] highmem bounce pool size: 64 pages
[ 0.716740] VFS: Disk quotas dquot_6.5.1
[ 0.716761] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.716831] Initializing Cryptographic API
[ 0.716835] io scheduler noop registered
[ 0.716846] io scheduler anticipatory registered
[ 0.716853] io scheduler deadline registered
[ 0.716870] io scheduler cfq registered (default)
[ 0.717055] isapnp: Scanning for PnP cards...
[ 1.071122] isapnp: No Plug & Play device found
[ 1.095531] Real Time Clock Driver v1.12ac
[ 1.095581] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.096727] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.096860] 8139too Fast Ethernet driver 0.9.27
[ 1.096880] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 169
[ 1.097172] eth0: RealTek RTL8139 at 0xf8804c00, 00:13:8f:9d:c2:2f, IRQ 169
[ 1.097175] eth0: Identified 8139 chip type 'RTL-8101'
[ 1.097182] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.097186] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.097209] ICH5: IDE controller at PCI slot 0000:00:1f.1
[ 1.097215] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177
[ 1.097222] ICH5: chipset revision 2
[ 1.097224] ICH5: not 100% native mode: will probe irqs later
[ 1.097234] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[ 1.097247] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
[ 1.097256] Probing IDE interface ide0...
[ 1.360475] hda: Maxtor 6Y120L0, ATA DISK drive
[ 1.971764] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1.971815] Probing IDE interface ide1...
[ 2.642913] hdc: HL-DT-ST DVDRAM GSA-4160B, ATAPI CD/DVD-ROM drive
[ 3.356044] hdd: HL-DT-STDVD-ROM GDR8160B, ATAPI CD/DVD-ROM drive
[ 3.419088] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.419383] hda: max request size: 512KiB
[ 3.424818] hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[ 3.424966] hda: cache flushes supported
[ 3.425004] hda: hda1 hda2
[ 3.434529] hdc: ATAPI 79X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 3.434537] Uniform CD-ROM driver Revision: 3.20
[ 3.451760] hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
[ 3.460455] usbmon: debugfs is not available
[ 3.460513] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 185
[ 3.460530] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.460535] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.460589] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.460623] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.460629] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 3.460639] ehci_hcd 0000:00:1d.7: irq 185, io mem 0xfebffc00
[ 3.464532] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.464650] usb usb1: configuration #1 chosen from 1 choice
[ 3.464696] hub 1-0:1.0: USB hub found
[ 3.464704] hub 1-0:1.0: 8 ports detected
[ 3.565743] USB Universal Host Controller Interface driver v3.0
[ 3.565799] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 193
[ 3.565809] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.565812] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.565849] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.565871] uhci_hcd 0000:00:1d.0: irq 193, io base 0x0000e000
[ 3.565994] usb usb2: configuration #1 chosen from 1 choice
[ 3.566033] hub 2-0:1.0: USB hub found
[ 3.566041] hub 2-0:1.0: 2 ports detected
[ 3.666619] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201
[ 3.666627] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.666630] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.666667] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.666691] uhci_hcd 0000:00:1d.1: irq 201, io base 0x0000e400
[ 3.666809] usb usb3: configuration #1 chosen from 1 choice
[ 3.666849] hub 3-0:1.0: USB hub found
[ 3.666855] hub 3-0:1.0: 2 ports detected
[ 3.767495] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177
[ 3.767503] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.767507] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.767543] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.767565] uhci_hcd 0000:00:1d.2: irq 177, io base 0x0000e800
[ 3.767690] usb usb4: configuration #1 chosen from 1 choice
[ 3.767730] hub 4-0:1.0: USB hub found
[ 3.767737] hub 4-0:1.0: 2 ports detected
[ 3.868369] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 193
[ 3.868376] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.868380] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.868417] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.868436] uhci_hcd 0000:00:1d.3: irq 193, io base 0x0000ec00
[ 3.868558] usb usb5: configuration #1 chosen from 1 choice
[ 3.868597] hub 5-0:1.0: USB hub found
[ 3.868604] hub 5-0:1.0: 2 ports detected
[ 4.081026] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 4.244080] usb 3-1: configuration #1 chosen from 1 choice
[ 4.452573] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 4.604627] usb 3-2: configuration #1 chosen from 1 choice
[ 4.607711] usbcore: registered new driver libusual
[ 4.607789] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 4.607793] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 4.609675] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.609887] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.610007] mice: PS/2 mouse device common for all mice
[ 4.610495] EISA: Probing bus 0 at eisa.0
[ 4.610537] EISA: Detected 0 cards.
[ 4.610560] Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
[ 4.610640] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 209
[ 4.610664] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 4.883549] input: AT Translated Set 2 keyboard as /class/input/input0
[ 4.920004] intel8x0_measure_ac97_clock: measured 50993 usecs
[ 4.920006] intel8x0: clocking to 48000
[ 4.920278] ALSA device list:
[ 4.920281] #0: Intel ICH5 with CMI9761 at 0xfebff800, irq 209
[ 4.920345] TCP bic registered
[ 4.920353] NET: Registered protocol family 1
[ 4.920360] NET: Registered protocol family 8
[ 4.920362] NET: Registered protocol family 20
[ 4.920396] Starting balanced_irq
[ 4.920402] Using IPI No-Shortcut mode
[ 4.920472] ACPI: (supports S0 S1 S3 S4 S5)
[ 4.920698] Freeing unused kernel memory: 308k freed
[ 4.920864] Time: tsc clocksource has been installed.
[ 4.984997] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node c18e589c), AE_BAD_HEADER
[ 4.985058] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 4.985123] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node c18e57fc), AE_BAD_HEADER
[ 4.985154] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 4.985162] ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 4.985167] ACPI: Getting cpuindex for acpiid 0x3
[ 4.985230] ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 4.985234] ACPI: Getting cpuindex for acpiid 0x4
[ 5.292911] usbcore: registered new driver hiddev
[ 5.313324] input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
[ 5.313451] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
[ 5.313465] usbcore: registered new driver usbhid
[ 5.313469] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 5.467733] SCSI subsystem initialized
[ 5.472161] libata version 2.00 loaded.
[ 5.474210] ata_piix 0000:00:1f.2: version 2.00
[ 5.474215] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 5.474232] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 177
[ 5.474244] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 5.474501] ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma 0xC400 irq 177
[ 5.474533] ata2: SATA max UDMA/133 cmd 0xCC00 ctl 0xC802 bmdma 0xC408 irq 177
[ 5.474541] scsi0 : ata_piix
[ 5.625854] ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48
[ 5.625858] ata1.00: ata1: dev 0 multi count 16
[ 5.626626] ata1.00: configured for UDMA/133
[ 5.626634] scsi1 : ata_piix
[ 5.787151] ATA: abnormal status 0x7F on port 0xCC07
[ 5.787244] Vendor: ATA Model: WDC WD2500KS-00M Rev: 02.0
[ 5.787259] Type: Direct-Access ANSI SCSI revision: 05
[ 5.792555] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 5.792569] sda: Write Protect is off
[ 5.792572] sda: Mode Sense: 00 3a 00 00
[ 5.792590] SCSI device sda: drive cache: write back
[ 5.792639] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 5.792650] sda: Write Protect is off
[ 5.792653] sda: Mode Sense: 00 3a 00 00
[ 5.792670] SCSI device sda: drive cache: write back
[ 5.792672] sda: sda1 sda2 sda3 < sda5 >
[ 5.822730] sd 0:0:0:0: Attached scsi disk sda
[ 6.066138] Attempting manual resume
[ 6.079865] kjournald starting. Commit interval 5 seconds
[ 6.079875] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.303256] hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
[ 13.303262] ide: failed opcode was: unknown
[ 13.403770] hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest }
[ 13.403774] ide: failed opcode was: unknown
[ 13.499601] Floppy drive(s): fd0 is 1.44M
[ 13.515306] FDC 0 is a post-1991 82077
[ 13.517655] input: PC Speaker as /class/input/input2
[ 13.540917] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.570894] Linux agpgart interface v0.101 (c) Dave Jones
[ 13.576466] hda: CHECK for good STATUS
[ 13.576493] hda: CHECK for good STATUS
[ 13.591592] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.606916] agpgart: Detected an Intel 865 Chipset.
[ 13.619975] agpgart: AGP aperture is 256M @ 0xe0000000
[ 13.633518] hda: CHECK for good STATUS
[ 13.740274] hdc: CHECK for good STATUS
[ 13.740596] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[ 13.740603] hdc: drive_cmd: error=0x04 { AbortedCommand }
[ 13.740605] ide: failed opcode was: 0xef
[ 13.741517] hdc: CHECK for good STATUS
[ 13.751393] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[ 13.753696] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[ 13.753703] hdc: drive_cmd: error=0x04 { AbortedCommand }
[ 13.753706] ide: failed opcode was: 0xef
[ 13.766783] hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
[ 13.766790] hdd: set_drive_speed_status: error=0x24 { AbortedCommand LastFailedSense=0x02 }
[ 13.766795] ide: failed opcode was: unknown
[ 13.819989] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 13.842515] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 13.847136] hdc: CHECK for good STATUS
[ 13.847460] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[ 13.847467] hdc: drive_cmd: error=0x04 { AbortedCommand }
[ 13.847469] ide: failed opcode was: 0xef
[ 13.919047] hdd: CHECK for good STATUS
[ 13.926870] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[ 13.926876] hdd: drive_cmd: error=0x04 { AbortedCommand }
[ 13.926878] ide: failed opcode was: 0xef
[ 13.933029] hdd: CHECK for good STATUS
[ 13.933616] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[ 13.933621] hdd: drive_cmd: error=0x04 { AbortedCommand }
[ 13.933624] ide: failed opcode was: 0xef
[ 14.015928] hdd: CHECK for good STATUS
[ 14.027834] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[ 14.027840] hdd: drive_cmd: error=0x04 { AbortedCommand }
[ 14.027843] ide: failed opcode was: 0xef
[ 14.064387] ts: Compaq touchscreen protocol output
[ 14.092948] NET: Registered protocol family 10
[ 14.093040] lo: Disabled Privacy Extensions
[ 14.093165] IPv6 over IPv4 tunneling driver
[ 14.216674] nvidia: module license 'NVIDIA' taints kernel.
[ 14.219257] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
[ 14.219432] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006
[ 14.557270] lp: driver loaded but no devices found
[ 14.568869] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 209
[ 14.682453] Adding 2546260k swap on /dev/disk/by-uuid/0fa29cb5-36a3-4637-8e6a-2567cf375865. Priority:-1 extents:1 across:2546260k
[ 14.742403] EXT3 FS on hda1, internal journal
[ 14.989335] kjournald starting. Commit interval 5 seconds
[ 14.989628] EXT3 FS on sda2, internal journal
[ 14.989633] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.997800] kjournald starting. Commit interval 5 seconds
[ 14.997994] EXT3 FS on hda2, internal journal
[ 14.997998] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.027052] NTFS driver 2.1.27 [Flags: R/O MODULE].
[ 15.046091] NTFS volume version 3.1.
[ 16.272652] NET: Registered protocol family 17
^ permalink raw reply [flat|nested] 6+ messages in thread* dmesg
@ 2004-06-28 10:26 BBaron
0 siblings, 0 replies; 6+ messages in thread
From: BBaron @ 2004-06-28 10:26 UTC (permalink / raw)
To: linux-smp
Hello linux-smp,
Linux version 2.4.20-8smp (bhcompile@porky.devel.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 SMP Thu Mar 13 17:45:54 EST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fc480
hm, page 000fc000 reserved twice.
hm, page 000fd000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
On node 0 totalpages: 262128
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 32752 pages.
ACPI: Searched entire block, no RSDP was found.
ACPI: RSDP located at physical address c00fa6a0
RSD PTR v0 [AMI ]
__va_range(0x3fff0000, 0x68): idx=10 mapped at ffff5000
ACPI table found: RSDT v1 [AMIINT INTEL875 0.16]
__va_range(0x3fff0030, 0x24): idx=10 mapped at ffff5000
__va_range(0x3fff0030, 0x81): idx=10 mapped at ffff5000
ACPI table found: FACP v1 [AMIINT INTEL875 0.17]
__va_range(0x3fff00c0, 0x24): idx=10 mapped at ffff5000
__va_range(0x3fff00c0, 0x5c): idx=10 mapped at ffff5000
ACPI table found: APIC v1 [AMIINT INTEL875 0.9]
__va_range(0x3fff00c0, 0x5c): idx=10 mapped at ffff5000
LAPIC (acpi_id[0x0001] id[0x0] enabled[1])
CPU 0 (0x0000) enabledProcessor #0 Unknown CPU [15:3] APIC version 16
LAPIC (acpi_id[0x0002] id[0x1] enabled[1])
CPU 1 (0x0100) enabledProcessor #1 Unknown CPU [15:3] APIC version 16
IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0])
INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
2 CPUs total
Local APIC address fee00000
Enabling the CPU's according to the ACPI table
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: INTEL Product ID: I875 APIC at: 0xFEE00000
I/O APIC #2 Version 32 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
Kernel command line: auto BOOT_IMAGE=linux ro BOOT_FILE=/boot/vmlinuz-2.4.20-8smp root=LABEL=/
Initializing CPU#0
Detected 2800.160 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 5583.66 BogoMIPS
Memory: 1026784k/1048512k available (1480k kernel code, 18144k reserved, 1094k data, 156k init, 131008k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03
per-CPU timeslice cutoff: 2925.31 usecs.
task migration cache decay timeout: 10 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 5596.77 BogoMIPS
CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03
Total of 2 processors activated (11180.44 BogoMIPS).
cpu_sibling_map[0] = 1
cpu_sibling_map[1] = 0
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-12, 2-20, 2-21, 2-22 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 22.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00178020
....... : arbitration: 00
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 0FF 0F 0 0 0 0 0 1 1 39
02 0FF 0F 0 0 0 0 0 1 1 31
03 0FF 0F 0 0 0 0 0 1 1 41
04 0FF 0F 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 0FF 0F 0 0 0 0 0 1 1 51
07 0FF 0F 0 0 0 0 0 1 1 59
08 0FF 0F 0 0 0 0 0 1 1 61
09 0FF 0F 0 0 0 0 0 1 1 69
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 0FF 0F 0 0 0 0 0 1 1 71
0e 0FF 0F 0 0 0 0 0 1 1 79
0f 0FF 0F 0 0 0 0 0 1 1 81
10 0FF 0F 1 1 0 1 0 1 1 89
11 0FF 0F 1 1 0 1 0 1 1 91
12 0FF 0F 1 1 0 1 0 1 1 99
13 0FF 0F 1 1 0 1 0 1 1 A1
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 0FF 0F 1 1 0 1 0 1 1 A9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2800.2191 MHz.
..... host bus clock speed is 200.0155 MHz.
cpu: 0, clocks: 2000155, slice: 666718
CPU0<T0:2000144,T1:1333424,D:2,S:666718,C:2000155>
cpu: 1, clocks: 2000155, slice: 666718
CPU1<T0:2000144,T1:666704,D:4,S:666718,C:2000155>
checking TSC synchronization across CPUs: passed.
Starting migration thread for cpu 0
smp_num_cpus: 2.
Starting migration thread for cpu 1
PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=3
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router default [8086/24d0] at 00:1f.0
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P2) -> 18
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P3) -> 23
PCI->APIC IRQ transform: (B0,I31,P0) -> 18
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B2,I1,P0) -> 18
PCI->APIC IRQ transform: (B3,I0,P0) -> 16
PCI->APIC IRQ transform: (B3,I3,P0) -> 19
--
Best regards,
BBaron
mailto:bbaron@bbaron.sk
^ permalink raw reply [flat|nested] 6+ messages in thread* dmesg
@ 2003-10-06 15:38 Mike Daugird
0 siblings, 0 replies; 6+ messages in thread
From: Mike Daugird @ 2003-10-06 15:38 UTC (permalink / raw)
To: 'linux-smp@vger.kernel.org'
I got this warning in my dmesg asking me to email it to you.
I am having sound card problems so I posted the file on the net, I am
sending you a link to keep email size down.
Hope this helps.
http://www.mike.daugird.com/gentoo/dmesg.txt
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2007-10-04 17:44 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-10-04 1:53 dmesg Michael Sicher
2007-10-04 17:44 ` dmesg Len Brown
-- strict thread matches above, loose matches on Subject: below --
2006-09-23 16:44 dmesg Vincent Gentilcore
2006-09-25 9:42 ` dmesg Bernhard Walle
2004-06-28 10:26 dmesg BBaron
2003-10-06 15:38 dmesg Mike Daugird
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.