From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
To: vgoyal@in.ibm.com, hbabu@us.ibm.com, tglx@linutronix.de
Cc: kexec@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/3] x86: add lapic_shutdown for x86_64
Date: Fri, 19 Oct 2007 18:21:11 -0700 [thread overview]
Message-ID: <47195807.6030809@ct.jp.nec.com> (raw)
In-Reply-To: <47195763.1090803@ct.jp.nec.com>
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
---
arch/x86/kernel/apic_64.c | 14 ++++++++++++++
include/asm-x86/apic_64.h | 1 +
2 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
index f47bc49..f28ccb5 100644
--- a/arch/x86/kernel/apic_64.c
+++ b/arch/x86/kernel/apic_64.c
@@ -287,6 +287,20 @@ void disable_local_APIC(void)
apic_write(APIC_SPIV, value);
}
+void lapic_shutdown(void)
+{
+ unsigned long flags;
+
+ if (!cpu_has_apic)
+ return;
+
+ local_irq_save(flags);
+
+ disable_local_APIC();
+
+ local_irq_restore(flags);
+}
+
/*
* This is to verify that we're looking at a real local APIC.
* Check these against your board if the CPUs aren't getting
diff --git a/include/asm-x86/apic_64.h b/include/asm-x86/apic_64.h
index 3c8f21e..2747a11 100644
--- a/include/asm-x86/apic_64.h
+++ b/include/asm-x86/apic_64.h
@@ -69,6 +69,7 @@ extern void clear_local_APIC (void);
extern void connect_bsp_APIC (void);
extern void disconnect_bsp_APIC (int virt_wire_setup);
extern void disable_local_APIC (void);
+extern void lapic_shutdown (void);
extern int verify_local_APIC (void);
extern void cache_APIC_registers (void);
extern void sync_Arb_IDs (void);
--
1.5.2.3
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec
WARNING: multiple messages have this Message-ID (diff)
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
To: vgoyal@in.ibm.com, hbabu@us.ibm.com, tglx@linutronix.de
Cc: linux-kernel@vger.kernel.org, kexec@lists.infradead.org
Subject: Re: [PATCH 1/3] x86: add lapic_shutdown for x86_64
Date: Fri, 19 Oct 2007 18:21:11 -0700 [thread overview]
Message-ID: <47195807.6030809@ct.jp.nec.com> (raw)
In-Reply-To: <47195763.1090803@ct.jp.nec.com>
From: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
---
arch/x86/kernel/apic_64.c | 14 ++++++++++++++
include/asm-x86/apic_64.h | 1 +
2 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
index f47bc49..f28ccb5 100644
--- a/arch/x86/kernel/apic_64.c
+++ b/arch/x86/kernel/apic_64.c
@@ -287,6 +287,20 @@ void disable_local_APIC(void)
apic_write(APIC_SPIV, value);
}
+void lapic_shutdown(void)
+{
+ unsigned long flags;
+
+ if (!cpu_has_apic)
+ return;
+
+ local_irq_save(flags);
+
+ disable_local_APIC();
+
+ local_irq_restore(flags);
+}
+
/*
* This is to verify that we're looking at a real local APIC.
* Check these against your board if the CPUs aren't getting
diff --git a/include/asm-x86/apic_64.h b/include/asm-x86/apic_64.h
index 3c8f21e..2747a11 100644
--- a/include/asm-x86/apic_64.h
+++ b/include/asm-x86/apic_64.h
@@ -69,6 +69,7 @@ extern void clear_local_APIC (void);
extern void connect_bsp_APIC (void);
extern void disconnect_bsp_APIC (int virt_wire_setup);
extern void disable_local_APIC (void);
+extern void lapic_shutdown (void);
extern int verify_local_APIC (void);
extern void cache_APIC_registers (void);
extern void sync_Arb_IDs (void);
--
1.5.2.3
next prev parent reply other threads:[~2007-10-20 1:21 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-20 1:18 [PATCH 0/3] x86: unify crash_32/64.c Hiroshi Shimamoto
2007-10-20 1:18 ` Hiroshi Shimamoto
2007-10-20 1:21 ` Hiroshi Shimamoto [this message]
2007-10-20 1:21 ` [PATCH 1/3] x86: add lapic_shutdown for x86_64 Hiroshi Shimamoto
2007-10-24 6:29 ` Vivek Goyal
2007-10-24 6:29 ` Vivek Goyal
2007-10-24 21:27 ` Hiroshi Shimamoto
2007-10-24 21:27 ` Hiroshi Shimamoto
2007-10-25 0:28 ` Eric W. Biederman
2007-10-25 0:28 ` Eric W. Biederman
2007-10-29 22:45 ` Hiroshi Shimamoto
2007-10-29 22:45 ` Hiroshi Shimamoto
2007-10-29 22:39 ` [PATCH] Revert " Hiroshi Shimamoto
2007-10-29 22:39 ` Hiroshi Shimamoto
2007-10-29 23:15 ` Arjan van de Ven
2007-10-29 23:15 ` Arjan van de Ven
2007-10-30 0:05 ` Hiroshi Shimamoto
2007-10-30 0:05 ` Hiroshi Shimamoto
2007-10-30 1:06 ` Thomas Gleixner
2007-10-30 1:06 ` Thomas Gleixner
2007-10-20 1:23 ` [PATCH 2/3] x86: add safe_smp_processor_id " Hiroshi Shimamoto
2007-10-20 1:23 ` Hiroshi Shimamoto
2007-10-24 6:31 ` Vivek Goyal
2007-10-24 6:31 ` Vivek Goyal
2007-10-24 9:01 ` Vivek Goyal
2007-10-24 9:01 ` Vivek Goyal
2007-10-20 1:24 ` [PATCH 3/3] x86: unify crash_32/64.c Hiroshi Shimamoto
2007-10-20 1:24 ` Hiroshi Shimamoto
2007-10-20 10:50 ` [PATCH 0/3] " Thomas Gleixner
2007-10-20 10:50 ` Thomas Gleixner
2007-10-24 6:34 ` Vivek Goyal
2007-10-24 6:34 ` Vivek Goyal
2007-10-24 16:28 ` Hiroshi Shimamoto
2007-10-24 16:28 ` Hiroshi Shimamoto
2007-10-25 17:58 ` Hiroshi Shimamoto
2007-10-25 17:58 ` Hiroshi Shimamoto
2007-10-26 21:43 ` Hiroshi Shimamoto
2007-10-26 21:43 ` Hiroshi Shimamoto
2007-10-26 22:37 ` Thomas Gleixner
2007-10-26 22:37 ` Thomas Gleixner
2007-10-27 0:13 ` Hiroshi Shimamoto
2007-10-27 0:13 ` Hiroshi Shimamoto
2007-10-27 1:15 ` Hiroshi Shimamoto
2007-10-27 1:15 ` Hiroshi Shimamoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47195807.6030809@ct.jp.nec.com \
--to=h-shimamoto@ct.jp.nec.com \
--cc=hbabu@us.ibm.com \
--cc=kexec@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=vgoyal@in.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.