[Xenomai-help] Comedi driver for use with xenomai

All of lore.kernel.org
 help / color / mirror / Atom feed

* [Xenomai-help] Comedi driver for use with xenomai
@ 2007-09-20 13:49 Leopold Palomo-Avellaneda
  2007-09-20 22:36 ` Alexis Berlemont
  0 siblings, 1 reply; 29+ messages in thread
From: Leopold Palomo-Avellaneda @ 2007-09-20 13:49 UTC (permalink / raw)
  To: xenomai

Hi,

some time ago, Alexis Berlemont posted this message [1] about the possibility 
to use a comedi (or modified) driver with xenomai .

My question is: there's a driver in comedi that I would like to use with 
xenomai. Is this possible? 

Regards,

Leo

[1] https://mail.comedi.org/pipermail/comedi/2006-April/007853.html

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-09-20 13:49 [Xenomai-help] Comedi driver for use with xenomai Leopold Palomo-Avellaneda
@ 2007-09-20 22:36 ` Alexis Berlemont
  2007-09-21  7:10   ` Leopold Palomo Avellaneda
  0 siblings, 1 reply; 29+ messages in thread
From: Alexis Berlemont @ 2007-09-20 22:36 UTC (permalink / raw)
  To: xenomai

Hi,

> some time ago, Alexis Berlemont posted this message [1] about the
> possibility to use a comedi (or modified) driver with xenomai .
>
> My question is: there's a driver in comedi that I would like to use with
> xenomai. Is this possible?

Currently, the RTDM version of Comedi supports only test drivers. I have tried 
to port some NI drivers just so as to ensure that my Comedi infrastructure 
was coherent.

However, if you want to add a new driver which comes from the original Comedi 
set, there will be little work to do as the API has changed a little bit.

Which driver is it ? 

You may have noticed that I am still developing Comedi4RTDM. I have decided to 
start from scratch in order to make the most of the RTDM advantages. The 
drawback is, for me, is the time needed to perform such a task (according to 
my private schedule). 

Because of many issues, it's been while since I committed on the Comedi branch 
(too many bugs/instabilities, lack of time, etc.). I will send many fixes / 
changes / adds (notably a minimal version of a NI driver) the next week.

I hope that will help you.

By the way, if you (or anyone else) are interested in working in this 
mini-project, assessing it or just giving your opinion on the subject, please 
let me know.

Best regards.

Alexis.

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-09-20 22:36 ` Alexis Berlemont
@ 2007-09-21  7:10   ` Leopold Palomo Avellaneda
  2007-09-21  8:43     ` Anders Blomdell
  0 siblings, 1 reply; 29+ messages in thread
From: Leopold Palomo Avellaneda @ 2007-09-21  7:10 UTC (permalink / raw)
  To: xenomai

[-- Attachment #1: Type: text/plain, Size: 2348 bytes --]

A Divendres 21 Setembre 2007 00:36, Alexis Berlemont va escriure:
> Hi,
>
> > some time ago, Alexis Berlemont posted this message [1] about the
> > possibility to use a comedi (or modified) driver with xenomai .
> >
> > My question is: there's a driver in comedi that I would like to use with
> > xenomai. Is this possible?
>
> Currently, the RTDM version of Comedi supports only test drivers. I have
> tried to port some NI drivers just so as to ensure that my Comedi
> infrastructure was coherent.

Ok, what is a NI driver?

> However, if you want to add a new driver which comes from the original
> Comedi set, there will be little work to do as the API has changed a little
> bit.

oops ...

> Which driver is it ?

the jr3_pci. It's a pci card, with a dsp to read the signal from a force 
sensor.
http://www.comedi.org/cgi-bin/viewcvs.cgi/comedi/comedi/drivers/jr3_pci.c?rev=1.5&view=log

> You may have noticed that I am still developing Comedi4RTDM. I have decided
> to start from scratch in order to make the most of the RTDM advantages. The
> drawback is, for me, is the time needed to perform such a task (according
> to my private schedule).

It's a lot of work ..... but there's one think that I don't understand. Are 
you modifying the comedi sources? Because is yes, the idea is to have not a 
fork of comedi, than the efforts in the comedi team then will be used by the 
xenomai team.

> Because of many issues, it's been while since I committed on the Comedi
> branch (too many bugs/instabilities, lack of time, etc.). I will send many
> fixes / changes / adds (notably a minimal version of a NI driver) the next
> week.
>
> I hope that will help you.

thank for the mail and the clarification.

> By the way, if you (or anyone else) are interested in working in this
> mini-project, assessing it or just giving your opinion on the subject,
> please let me know.

I have no idea about the comedi drivers structure, neither the xenomai. I can 
be a tester, sure. I have just compiled, making a debian package, installed 
and sent the test. If I can have this driver, I can use xenomai if not, I 
have to return to rtai .... and I think that it's very interesting in my case 
use xenomai and not rtai.

Regards,

Leo

-- 
--
Linux User 152692
PGP: 0xF944807E
Catalonia

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-09-21  7:10   ` Leopold Palomo Avellaneda
@ 2007-09-21  8:43     ` Anders Blomdell
  2007-09-21 12:51       ` Leopold Palomo-Avellaneda
  0 siblings, 1 reply; 29+ messages in thread
From: Anders Blomdell @ 2007-09-21  8:43 UTC (permalink / raw)
  To: lepalom; +Cc: xenomai

Leopold Palomo Avellaneda wrote:
> A Divendres 21 Setembre 2007 00:36, Alexis Berlemont va escriure:
>> Which driver is it ?
> 
> the jr3_pci. It's a pci card, with a dsp to read the signal from a force 
> sensor.
> http://www.comedi.org/cgi-bin/viewcvs.cgi/comedi/comedi/drivers/jr3_pci.c?rev=1.5&view=log
After October 20 and Alexis gets some real drivers ported to his new framework,
I can take a look at it.

Regards

Anders

-- 
Anders Blomdell                  Email: anders.blomdell@domain.hid
Department of Automatic Control
Lund University                  Phone:    +46 46 222 4625
P.O. Box 118                     Fax:      +46 46 138118
SE-221 00 Lund, Sweden


^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-09-21  8:43     ` Anders Blomdell
@ 2007-09-21 12:51       ` Leopold Palomo-Avellaneda
  2007-09-21 13:36         ` Anders Blomdell
  0 siblings, 1 reply; 29+ messages in thread
From: Leopold Palomo-Avellaneda @ 2007-09-21 12:51 UTC (permalink / raw)
  To: xenomai

A Divendres 21 Setembre 2007 10:43, Anders Blomdell va escriure:
> Leopold Palomo Avellaneda wrote:
> > A Divendres 21 Setembre 2007 00:36, Alexis Berlemont va escriure:
> >> Which driver is it ?
> >
> > the jr3_pci. It's a pci card, with a dsp to read the signal from a force
> > sensor.
> > http://www.comedi.org/cgi-bin/viewcvs.cgi/comedi/comedi/drivers/jr3_pci.c
> >?rev=1.5&view=log
>
> After October 20 and Alexis gets some real drivers ported to his new
> framework, I can take a look at it.

I'm sorry, but I don't understand the sentence. Well, I understand that I have 
to wait at last to middle of November? No problem. My system now it too 
complex to me to need it immediately. I just ask it to take one way or 
another.

Regards,

Leo


^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-09-21 12:51       ` Leopold Palomo-Avellaneda
@ 2007-09-21 13:36         ` Anders Blomdell
  2007-09-24 20:33           ` Alexis Berlemont
  0 siblings, 1 reply; 29+ messages in thread
From: Anders Blomdell @ 2007-09-21 13:36 UTC (permalink / raw)
  To: Leopold Palomo-Avellaneda; +Cc: xenomai

Leopold Palomo-Avellaneda wrote:
> A Divendres 21 Setembre 2007 10:43, Anders Blomdell va escriure:
>> Leopold Palomo Avellaneda wrote:
>>> A Divendres 21 Setembre 2007 00:36, Alexis Berlemont va escriure:
>>>> Which driver is it ?
>>> the jr3_pci. It's a pci card, with a dsp to read the signal from a force
>>> sensor.
>>> http://www.comedi.org/cgi-bin/viewcvs.cgi/comedi/comedi/drivers/jr3_pci.c
>>> ?rev=1.5&view=log
>> After October 20 and Alexis gets some real drivers ported to his new
>> framework, I can take a look at it.
> 
> I'm sorry, but I don't understand the sentence. Well, I understand that I have 
> to wait at last to middle of November? No problem. My system now it too 
> complex to me to need it immediately. I just ask it to take one way or 
> another.
20 October is due to other projects that will occupy me until then.
I'll also need some working examples from Alexis before I'll invest time in this
project (it's so much easier to modify an existing driver than to write one from
scratch).

Regards

Anders

-- 
Anders Blomdell                  Email: anders.blomdell@domain.hid
Department of Automatic Control
Lund University                  Phone:    +46 46 222 4625
P.O. Box 118                     Fax:      +46 46 138118
SE-221 00 Lund, Sweden


^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-09-21 13:36         ` Anders Blomdell
@ 2007-09-24 20:33           ` Alexis Berlemont
  2007-09-25  8:26             ` Leopold Palomo-Avellaneda
  2007-10-29 17:58             ` Leopold Palomo-Avellaneda
  0 siblings, 2 replies; 29+ messages in thread
From: Alexis Berlemont @ 2007-09-24 20:33 UTC (permalink / raw)
  To: xenomai

Hi,

Sorry for answering so late (I was unavailable).

>
> 20 October is due to other projects that will occupy me until then.
> I'll also need some working examples from Alexis before I'll invest time in
> this project (it's so much easier to modify an existing driver than to
> write one from scratch).

Many thanks for your help !!!

Concerning the jr3_pci driver, I will have a look at it and I hope I will be 
able to release a minimal version in the next few weeks.

Alexis.



^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-09-24 20:33           ` Alexis Berlemont
@ 2007-09-25  8:26             ` Leopold Palomo-Avellaneda
  2007-10-29 17:58             ` Leopold Palomo-Avellaneda
  1 sibling, 0 replies; 29+ messages in thread
From: Leopold Palomo-Avellaneda @ 2007-09-25  8:26 UTC (permalink / raw)
  To: xenomai

A Dilluns 24 Setembre 2007 22:33, Alexis Berlemont va escriure:
> Hi,
>
> Sorry for answering so late (I was unavailable).
>
> > 20 October is due to other projects that will occupy me until then.
> > I'll also need some working examples from Alexis before I'll invest time
> > in this project (it's so much easier to modify an existing driver than to
> > write one from scratch).
>
> Many thanks for your help !!!
>
> Concerning the jr3_pci driver, I will have a look at it and I hope I will
> be able to release a minimal version in the next few weeks.

Many thanks for all!!!!

That's great!!!

Leo


^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-09-24 20:33           ` Alexis Berlemont
  2007-09-25  8:26             ` Leopold Palomo-Avellaneda
@ 2007-10-29 17:58             ` Leopold Palomo-Avellaneda
  2007-10-29 22:55               ` Alexis Berlemont
  1 sibling, 1 reply; 29+ messages in thread
From: Leopold Palomo-Avellaneda @ 2007-10-29 17:58 UTC (permalink / raw)
  To: xenomai

A Dilluns 24 Setembre 2007, Alexis Berlemont va escriure:
> Hi,
>
> Sorry for answering so late (I was unavailable).
>
> > 20 October is due to other projects that will occupy me until then.
> > I'll also need some working examples from Alexis before I'll invest time
> > in this project (it's so much easier to modify an existing driver than to
> > write one from scratch).
>
> Many thanks for your help !!!
>
> Concerning the jr3_pci driver, I will have a look at it and I hope I will
> be able to release a minimal version in the next few weeks.
>

some time ago we wrote about the avalaible of the jr3_pci driver. The option 
to have someone at the end of October. So, how is it?

It could be possible to have it for xenomai-2.4? 

Regards,

Leo 





^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-10-29 17:58             ` Leopold Palomo-Avellaneda
@ 2007-10-29 22:55               ` Alexis Berlemont
  2007-10-30 14:24                 ` Leopold Palomo-Avellaneda
  0 siblings, 1 reply; 29+ messages in thread
From: Alexis Berlemont @ 2007-10-29 22:55 UTC (permalink / raw)
  To: xenomai

Hi,

>
> some time ago we wrote about the avalaible of the jr3_pci driver. The
> option to have someone at the end of October. So, how is it?

A pre-version is available in the svn branch "comedi-rtdm-dev". You will find 
in "comedi_drivers/misc_drivers", the driver jr3_pci.

The source code was ported from the original Comedi project (as the API has 
changed). Unfortunately, It is not tested (no hardware available). 

> It could be possible to have it for xenomai-2.4?

So far, the only way to get the driver sources  is through subversion. A great 
amount of work (development, test,...) must be achieved before considering an 
official release.

Regards.

Alexis.

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-10-29 22:55               ` Alexis Berlemont
@ 2007-10-30 14:24                 ` Leopold Palomo-Avellaneda
  2007-10-30 14:34                   ` Jan Kiszka
  0 siblings, 1 reply; 29+ messages in thread
From: Leopold Palomo-Avellaneda @ 2007-10-30 14:24 UTC (permalink / raw)
  To: xenomai

A Dilluns 29 Octubre 2007, Alexis Berlemont va escriure:
> Hi,
>
> > some time ago we wrote about the avalaible of the jr3_pci driver. The
> > option to have someone at the end of October. So, how is it?
>
> A pre-version is available in the svn branch "comedi-rtdm-dev". You will
> find in "comedi_drivers/misc_drivers", the driver jr3_pci.
>
> The source code was ported from the original Comedi project (as the API has
> changed). Unfortunately, It is not tested (no hardware available).

Ok, I have download, compiled and installed. I'm using xenomai 2.4-rc4. All 
have compiled without any problem. Howeber I don't know how to use it.

If I try to install the modules:

insmod comedi.ko   

no problem

but if I do:
 insmod ./comedi_drivers/misc_drivers/jr3pci.ko  

I got

insmod: error inserting './comedi_drivers/misc_drivers/jr3pci.ko': -1 Unknown 
symbol in module

where the dmesg says:

jr3pci: no version for "comedi_add_drv" found: kernel tainted.
jr3pci: Unknown symbol release_firmware
jr3pci: Unknown symbol device_unregister
jr3pci: Unknown symbol request_firmware
jr3pci: Unknown symbol device_register
jr3pci: Unknown symbol release_firmware
jr3pci: Unknown symbol device_unregister
jr3pci: Unknown symbol request_firmware
jr3pci: Unknown symbol device_register

and now I'm blocked ....

> > It could be possible to have it for xenomai-2.4?
>
> So far, the only way to get the driver sources  is through subversion. A
> great amount of work (development, test,...) must be achieved before
> considering an official release.

ok

I should help if I want this driver working with xenomai ....

Regards,

Leo

PS use me as betatester of the driver, so if told me any test that I could do.

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-10-30 14:24                 ` Leopold Palomo-Avellaneda
@ 2007-10-30 14:34                   ` Jan Kiszka
  2007-10-30 15:04                     ` Leopold Palomo-Avellaneda
  0 siblings, 1 reply; 29+ messages in thread
From: Jan Kiszka @ 2007-10-30 14:34 UTC (permalink / raw)
  To: Leopold Palomo-Avellaneda; +Cc: xenomai

Leopold Palomo-Avellaneda wrote:
> A Dilluns 29 Octubre 2007, Alexis Berlemont va escriure:
>> Hi,
>>
>>> some time ago we wrote about the avalaible of the jr3_pci driver. The
>>> option to have someone at the end of October. So, how is it?
>> A pre-version is available in the svn branch "comedi-rtdm-dev". You will
>> find in "comedi_drivers/misc_drivers", the driver jr3_pci.
>>
>> The source code was ported from the original Comedi project (as the API has
>> changed). Unfortunately, It is not tested (no hardware available).
> 
> Ok, I have download, compiled and installed. I'm using xenomai 2.4-rc4. All 
> have compiled without any problem. Howeber I don't know how to use it.
> 
> If I try to install the modules:
> 
> insmod comedi.ko   
> 
> no problem
> 
> but if I do:
>  insmod ./comedi_drivers/misc_drivers/jr3pci.ko  
> 
> I got
> 
> insmod: error inserting './comedi_drivers/misc_drivers/jr3pci.ko': -1 Unknown 
> symbol in module
> 
> 
> where the dmesg says:
> 
> jr3pci: no version for "comedi_add_drv" found: kernel tainted.
> jr3pci: Unknown symbol release_firmware
> jr3pci: Unknown symbol device_unregister
> jr3pci: Unknown symbol request_firmware
> jr3pci: Unknown symbol device_register
> jr3pci: Unknown symbol release_firmware
> jr3pci: Unknown symbol device_unregister
> jr3pci: Unknown symbol request_firmware
> jr3pci: Unknown symbol device_register
> 
> and now I'm blocked ....

modprobe firmware?

> 
>>> It could be possible to have it for xenomai-2.4?
>> So far, the only way to get the driver sources  is through subversion. A
>> great amount of work (development, test,...) must be achieved before
>> considering an official release.
> 
> ok
> 
> I should help if I want this driver working with xenomai ....
> 
> Regards,
> 
> Leo
> 
> PS use me as betatester of the driver, so if told me any test that I could do.

Nice to see that this train is about to gain more passengers! :)

Jan

-- 
Siemens AG, Corporate Technology, CT SE 2
Corporate Competence Center Embedded Linux


^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-10-30 14:34                   ` Jan Kiszka
@ 2007-10-30 15:04                     ` Leopold Palomo-Avellaneda
  2007-10-31  0:17                       ` Alexis Berlemont
  0 siblings, 1 reply; 29+ messages in thread
From: Leopold Palomo-Avellaneda @ 2007-10-30 15:04 UTC (permalink / raw)
  To: Jan Kiszka; +Cc: xenomai

A Dimarts 30 Octubre 2007, Jan Kiszka va escriure:
> Leopold Palomo-Avellaneda wrote:
> > A Dilluns 29 Octubre 2007, Alexis Berlemont va escriure:
> >> Hi,
> >>
> >>> some time ago we wrote about the avalaible of the jr3_pci driver. The
> >>> option to have someone at the end of October. So, how is it?
> >>
> >> A pre-version is available in the svn branch "comedi-rtdm-dev". You will
> >> find in "comedi_drivers/misc_drivers", the driver jr3_pci.
> >>
> >> The source code was ported from the original Comedi project (as the API
> >> has changed). Unfortunately, It is not tested (no hardware available).
> >
> > Ok, I have download, compiled and installed. I'm using xenomai 2.4-rc4.
> > All have compiled without any problem. Howeber I don't know how to use
> > it.
> >
> > If I try to install the modules:
> >
> > insmod comedi.ko
> >
> > no problem
> >
> > but if I do:
> >  insmod ./comedi_drivers/misc_drivers/jr3pci.ko
> >
> > I got
> >
> > insmod: error inserting './comedi_drivers/misc_drivers/jr3pci.ko': -1
> > Unknown symbol in module
> >
> >
> > where the dmesg says:
> >
> > jr3pci: no version for "comedi_add_drv" found: kernel tainted.
> > jr3pci: Unknown symbol release_firmware
> > jr3pci: Unknown symbol device_unregister
> > jr3pci: Unknown symbol request_firmware
> > jr3pci: Unknown symbol device_register
> > jr3pci: Unknown symbol release_firmware
> > jr3pci: Unknown symbol device_unregister
> > jr3pci: Unknown symbol request_firmware
> > jr3pci: Unknown symbol device_register
> >
> > and now I'm blocked ....
>
> modprobe firmware?

$:/usr/src/xenomai-comedi-rtdm-dev$ sudo modprobe firmware
FATAL: Module firmware not found.

> >>> It could be possible to have it for xenomai-2.4?
> >>
> >> So far, the only way to get the driver sources  is through subversion. A
> >> great amount of work (development, test,...) must be achieved before
> >> considering an official release.
> >
> > ok
> >
> > I should help if I want this driver working with xenomai ....
> >
> > Regards,
> >
> > Leo
> >
> > PS use me as betatester of the driver, so if told me any test that I
> > could do.
>
> Nice to see that this train is about to gain more passengers! :)

:-)

Leo


^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-10-30 15:04                     ` Leopold Palomo-Avellaneda
@ 2007-10-31  0:17                       ` Alexis Berlemont
  2007-10-31  9:36                         ` Leopold Palomo Avellaneda
  0 siblings, 1 reply; 29+ messages in thread
From: Alexis Berlemont @ 2007-10-31  0:17 UTC (permalink / raw)
  To: xenomai

Hi,

> > modprobe firmware?
>
> $:/usr/src/xenomai-comedi-rtdm-dev$ sudo modprobe firmware
> FATAL: Module firmware not found.
>

Would you mind checking, in your kernel ".config" file, that the option 
CONFIG_FW_LOADER is enabled?

> > >
> > > Ok, I have download, compiled and installed. I'm using xenomai 2.4-rc4.
> > > All have compiled without any problem. Howeber I don't know how to use
> > > it.

If you manage to insmod this driver, the second step would be : trying to 
attach the jr3_pci driver to a comedi (rtdm) device:

comedi_bin/bin_nrt/comedi_config comedi0 jr3_pci

This should initialize the hardware and download the firmware (available in 
the comedi-non-free package from www.comedi.org, I think).
The instructions are located in the driver source header: 

/*
Driver: jr3_pci
Description: JR3/PCI force sensor board
Author: Anders Blomdell <anders.blomdell@domain.hid>
Devices: [JR3] PCI force sensor board (jr3_pci)

  The DSP on the board requires initialization code, which can 
  be loaded by placing it in /lib/firmware/comedi.  
  The initialization code should be somewhere on the media you got 
  with your card. One version is available from http://www.comedi.org
  in the comedi_nonfree_firmware tarball.

...
*/

I may be unreachable until the end of this week.

Many thanks for your tests!

Regards.

Alexis.

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-10-31  0:17                       ` Alexis Berlemont
@ 2007-10-31  9:36                         ` Leopold Palomo Avellaneda
  2007-11-05 23:32                           ` Alexis Berlemont
  0 siblings, 1 reply; 29+ messages in thread
From: Leopold Palomo Avellaneda @ 2007-10-31  9:36 UTC (permalink / raw)
  To: xenomai

[-- Attachment #1: Type: text/plain, Size: 2227 bytes --]

A Dimecres 31 Octubre 2007, Alexis Berlemont va escriure:
> Hi,
>
> > > modprobe firmware?
> >
> > $:/usr/src/xenomai-comedi-rtdm-dev$ sudo modprobe firmware
> > FATAL: Module firmware not found.
>
> Would you mind checking, in your kernel ".config" file, that the option
> CONFIG_FW_LOADER is enabled?

yes, it is. The debian config put is as a module. I load it (I guess) with :

sudo modprobe firmware_class

no problem. 

Then I load the comedi driver:

sudo insmod comedi_kcore/comedi.ko  

no problem,

And after, the jr3 driver, but I got with dmesg: 

jr3pci: module license 'unspecified' taints kernel.
jr3pci: no version for "comedi_add_drv" found: kernel tainted.
jr3pci: Unknown symbol device_unregister
jr3pci: Unknown symbol device_register


so, I cannot load the driver. What I'm doing grong?

> > > > Ok, I have download, compiled and installed. I'm using xenomai
> > > > 2.4-rc4. All have compiled without any problem. Howeber I don't know
> > > > how to use it.
>
> If you manage to insmod this driver, the second step would be : trying to
> attach the jr3_pci driver to a comedi (rtdm) device:
>
> comedi_bin/bin_nrt/comedi_config comedi0 jr3_pci
>
> This should initialize the hardware and download the firmware (available in
> the comedi-non-free package from www.comedi.org, I think).
> The instructions are located in the driver source header:
>
> /*
> Driver: jr3_pci
> Description: JR3/PCI force sensor board
> Author: Anders Blomdell <anders.blomdell@domain.hid>
> Devices: [JR3] PCI force sensor board (jr3_pci)
>
>   The DSP on the board requires initialization code, which can
>   be loaded by placing it in /lib/firmware/comedi.
>   The initialization code should be somewhere on the media you got
>   with your card. One version is available from http://www.comedi.org
>   in the comedi_nonfree_firmware tarball.
>
> ...
> */

this is done. I have unload this package and put it on  /lib/firmware/comedi

> I may be unreachable until the end of this week.

no problem.

> Many thanks for your tests!

nops, many thanks to _you_ for the driver

Best regards,

Leo

-- 
--
Linux User 152692
PGP: 0xF944807E
Catalonia

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-10-31  9:36                         ` Leopold Palomo Avellaneda
@ 2007-11-05 23:32                           ` Alexis Berlemont
  2007-11-06 10:02                             ` Leopold Palomo-Avellaneda
  0 siblings, 1 reply; 29+ messages in thread
From: Alexis Berlemont @ 2007-11-05 23:32 UTC (permalink / raw)
  To: xenomai

Hi

> And after, the jr3 driver, but I got with dmesg:
>
> jr3pci: module license 'unspecified' taints kernel.
> jr3pci: no version for "comedi_add_drv" found: kernel tainted.
> jr3pci: Unknown symbol device_unregister
> jr3pci: Unknown symbol device_register
>
>
> so, I cannot load the driver. What I'm doing grong?

Oops. My fault. Fixed in subversion.

Please update.

Alexis.



^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-11-05 23:32                           ` Alexis Berlemont
@ 2007-11-06 10:02                             ` Leopold Palomo-Avellaneda
  2007-11-07 14:56                               ` Jan Kiszka
  0 siblings, 1 reply; 29+ messages in thread
From: Leopold Palomo-Avellaneda @ 2007-11-06 10:02 UTC (permalink / raw)
  To: xenomai

A Dimarts 06 Novembre 2007, Alexis Berlemont va escriure:
> Hi
>
> > And after, the jr3 driver, but I got with dmesg:
> >
> > jr3pci: module license 'unspecified' taints kernel.
> > jr3pci: no version for "comedi_add_drv" found: kernel tainted.
> > jr3pci: Unknown symbol device_unregister
> > jr3pci: Unknown symbol device_register
> >
> >
> > so, I cannot load the driver. What I'm doing grong?
>
> Oops. My fault. Fixed in subversion.
>
> Please update.
>
done, but when I do:
sudo insmod comedi_drivers/misc_drivers/jr3pci.ko

I got a console hangs, with no response and the dmesg says:
jr3pci: no version for "comedi_add_drv" found: kernel tainted.
comedi_add_drv: name=jr3_pci
comedi_lct_drv: name=jr3_pci


Now, I'm still blocked ....

Regards,

Leo


^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-11-06 10:02                             ` Leopold Palomo-Avellaneda
@ 2007-11-07 14:56                               ` Jan Kiszka
  2007-11-07 15:12                                 ` Leopold Palomo-Avellaneda
  0 siblings, 1 reply; 29+ messages in thread
From: Jan Kiszka @ 2007-11-07 14:56 UTC (permalink / raw)
  To: Leopold Palomo-Avellaneda; +Cc: xenomai

Leopold Palomo-Avellaneda wrote:
> A Dimarts 06 Novembre 2007, Alexis Berlemont va escriure:
>> Hi
>>
>>> And after, the jr3 driver, but I got with dmesg:
>>>
>>> jr3pci: module license 'unspecified' taints kernel.
>>> jr3pci: no version for "comedi_add_drv" found: kernel tainted.
>>> jr3pci: Unknown symbol device_unregister
>>> jr3pci: Unknown symbol device_register
>>>
>>>
>>> so, I cannot load the driver. What I'm doing grong?
>> Oops. My fault. Fixed in subversion.
>>
>> Please update.
>>
> done, but when I do:
> sudo insmod comedi_drivers/misc_drivers/jr3pci.ko
> 
> I got a console hangs, with no response and the dmesg says:
> jr3pci: no version for "comedi_add_drv" found: kernel tainted.
> comedi_add_drv: name=jr3_pci
> comedi_lct_drv: name=jr3_pci
> 
> 
> Now, I'm still blocked ....

Are you sure the (re-)build was clean? I haven't checked the comedi
branch recently for changes and/or problems with the build system, but
this used to work fine for me - once. :)

Jan

-- 
Siemens AG, Corporate Technology, CT SE 2
Corporate Competence Center Embedded Linux


^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-11-07 14:56                               ` Jan Kiszka
@ 2007-11-07 15:12                                 ` Leopold Palomo-Avellaneda
  2007-11-07 23:07                                   ` Alexis Berlemont
                                                     ` (2 more replies)
  0 siblings, 3 replies; 29+ messages in thread
From: Leopold Palomo-Avellaneda @ 2007-11-07 15:12 UTC (permalink / raw)
  To: Jan Kiszka; +Cc: xenomai

A Dimecres 07 Novembre 2007, Jan Kiszka va escriure:
> Leopold Palomo-Avellaneda wrote:
> > A Dimarts 06 Novembre 2007, Alexis Berlemont va escriure:
> >> Hi
> >>
> >>> And after, the jr3 driver, but I got with dmesg:
> >>>
> >>> jr3pci: module license 'unspecified' taints kernel.
> >>> jr3pci: no version for "comedi_add_drv" found: kernel tainted.
> >>> jr3pci: Unknown symbol device_unregister
> >>> jr3pci: Unknown symbol device_register
> >>>
> >>>
> >>> so, I cannot load the driver. What I'm doing grong?
> >>
> >> Oops. My fault. Fixed in subversion.
> >>
> >> Please update.
> >
> > done, but when I do:
> > sudo insmod comedi_drivers/misc_drivers/jr3pci.ko
> >
> > I got a console hangs, with no response and the dmesg says:
> > jr3pci: no version for "comedi_add_drv" found: kernel tainted.
> > comedi_add_drv: name=jr3_pci
> > comedi_lct_drv: name=jr3_pci
> >
> >
> > Now, I'm still blocked ....
>
> Are you sure the (re-)build was clean? I haven't checked the comedi
> branch recently for changes and/or problems with the build system, but
> this used to work fine for me - once. :)
>
make distclean;
svn uptade;
svn status;
./configure -with-xeno-install-path=/usr --with-linux-dir=/usr/src/linux-headers-2.6.22-xenomai-2.4-rc5

make

all normal but:

.....
 CC [M]  /usr/src/xenomai-comedi-rtdm-dev/comedi_kcore/comedi_transfer.o
/usr/src/xenomai-comedi-rtdm-dev/comedi_kcore/comedi_transfer.c: In 
function ‘comedi_ioctl_poll’:
/usr/src/xenomai-comedi-rtdm-dev/comedi_kcore/comedi_transfer.c:834: warning: 
cast from pointer to integer of different size

......
make[4]: Entering directory `/usr/src/linux-headers-2.6.22-xenomai-2.4-rc5'
  CC 
[M]  /usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_test_fake.o
  LD 
[M]  /usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testfake.o
  Building modules, stage 2.
  MODPOST 1 modules
WARNING: "comedi_rm_drv" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testfake.ko] 
undefined!
WARNING: "comedi_cleanup_drv" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testfake.ko] 
undefined!
WARNING: "comedi_drv_evt_put" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testfake.ko] 
undefined!
WARNING: "comedi_drv_get_cmd" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testfake.ko] 
undefined!
WARNING: "comedi_drv_memcpy_put" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testfake.ko] 
undefined!
WARNING: "comedi_get_dev" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testfake.ko] 
undefined!
WARNING: "comedi_check_dev" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testfake.ko] 
undefined!
WARNING: "comedi_drv_add_subd" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testfake.ko] 
undefined!
WARNING: "comedi_init_drv" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testfake.ko] 
undefined!
WARNING: "comedi_add_drv" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testfake.ko] 
undefined!

make[4]: Entering directory `/usr/src/linux-headers-2.6.22-xenomai-2.4-rc5'
  CC 
[M]  /usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_test_loop.o
  LD 
[M]  /usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testloop.o
  Building modules, stage 2.
  MODPOST 1 modules
WARNING: "comedi_drv_evt_get" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testloop.ko] 
undefined!
WARNING: "comedi_rm_drv" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testloop.ko] 
undefined!
WARNING: "comedi_cleanup_drv" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testloop.ko] 
undefined!
WARNING: "comedi_drv_evt_put" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testloop.ko] 
undefined!
WARNING: "comedi_drv_memcpy_put" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testloop.ko] 
undefined!
WARNING: "comedi_get_dev" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testloop.ko] 
undefined!
WARNING: "comedi_drv_memcpy_get" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testloop.ko] 
undefined!
WARNING: "comedi_check_dev" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testloop.ko] 
undefined!
WARNING: "comedi_drv_add_subd" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testloop.ko] 
undefined!
WARNING: "comedi_init_drv" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testloop.ko] 
undefined!
WARNING: "comedi_add_drv" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testloop.ko] 
undefined!

CC      /usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testloop.mod.o
  LD 
[M]  /usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers/comedi_testloop.ko
make[4]: Leaving directory `/usr/src/linux-headers-2.6.22-xenomai-2.4-rc5'
make[3]: Leaving directory 
`/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/test_drivers'
Making all in ni_drivers

........

make[4]: Entering directory `/usr/src/linux-headers-2.6.22-xenomai-2.4-rc5'
  CC [M]  /usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/pcimio.o
/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/pcimio.c: In 
function ‘pcimio_attach’:
/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/pcimio.c:780: 
warning: ‘deprecated_irq_flag’ is deprecated (declared at 
include/linux/interrupt.h:66)

............................

  LD 
[M]  /usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.o
  Building modules, stage 2.
  MODPOST 1 modules
WARNING: "comedi_drv_global_get" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_free_irq" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_drv_evt_get" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_drv_get_irq" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "range_bipolar10" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_drv_set_irq" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_rm_drv" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_cleanup_drv" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_drv_error_get" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_drv_check_global_put" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_drv_stop_get" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_drv_error_put" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_drv_global_put" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_drv_evt_put" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_drv_get_cmd" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_drv_memcpy_put" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_drv_check_global_get" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_get_dev" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_request_irq" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_check_dev" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_drv_add_subd" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_init_drv" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_drv_get_nbchan" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!
WARNING: "comedi_add_drv" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko] 
undefined!

CC      /usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.mod.o
  LD 
[M]  /usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers/ni_pcimio.ko
make[4]: Leaving directory `/usr/src/linux-headers-2.6.22-xenomai-2.4-rc5'
make[3]: Leaving directory 
`/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/ni_drivers'
Making all in misc_drivers
make[3]: Entering directory 
`/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/misc_drivers'
make[4]: Entering directory `/usr/src/xenomai-comedi-rtdm-dev'
make[4]: Leaving directory `/usr/src/xenomai-comedi-rtdm-dev'
make[4]: Entering directory `/usr/src/linux-headers-2.6.22-xenomai-2.4-rc5'
  CC 
[M]  /usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/misc_drivers/jr3_pci.o
/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/misc_drivers/jr3_pci.c: In 
function ‘jr3_pci_attach’:
/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/misc_drivers/jr3_pci.c:778: 
warning: format ‘%x’ expects type ‘unsigned int’, but argument 2 has 
type ‘long unsigned int’
/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/misc_drivers/jr3_pci.c:858: 
warning: cast from pointer to integer of different size
/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/misc_drivers/jr3_pci.c:858: 
warning: cast from pointer to integer of different size
  LD 
[M]  /usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/misc_drivers/jr3pci.o
  Building modules, stage 2.
  MODPOST 1 modules
WARNING: "comedi_rm_drv" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/misc_drivers/jr3pci.ko] 
undefined!
WARNING: "comedi_cleanup_drv" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/misc_drivers/jr3pci.ko] 
undefined!
WARNING: "comedi_get_time" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/misc_drivers/jr3pci.ko] 
undefined!
WARNING: "comedi_get_dev" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/misc_drivers/jr3pci.ko] 
undefined!
WARNING: "comedi_init_drv" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/misc_drivers/jr3pci.ko] 
undefined!
WARNING: "comedi_add_drv" 
[/usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/misc_drivers/jr3pci.ko] 
undefined!

CC      /usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/misc_drivers/jr3pci.mod.o
  LD 
[M]  /usr/src/xenomai-comedi-rtdm-dev/comedi_drivers/misc_drivers/jr3pci.ko

...........................................

sudo insmod comedi_kcore/comedi.ko   

ok
sudo modprobe firmware_class

ok

sudo insmod comedi_drivers/misc_drivers/jr3pci.ko
......
jr3pci: no version for "comedi_add_drv" found: kernel tainted.
comedi_add_drv: name=jr3_pci
comedi_lct_drv: name=jr3_pci

console blocked ....

Regards,

Leo

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-11-07 15:12                                 ` Leopold Palomo-Avellaneda
@ 2007-11-07 23:07                                   ` Alexis Berlemont
  2007-11-07 23:23                                     ` Leopold Palomo Avellaneda
  2007-11-07 23:12                                   ` Alexis Berlemont
  2007-11-07 23:50                                   ` Alexis Berlemont
  2 siblings, 1 reply; 29+ messages in thread
From: Alexis Berlemont @ 2007-11-07 23:07 UTC (permalink / raw)
  To: xenomai

Hi,


> jr3pci: no version for "comedi_add_drv" found: kernel tainted.
> comedi_add_drv: name=jr3_pci
> comedi_lct_drv: name=jr3_pci
>
> console blocked ....

By "console blocked",  you meant your whole system was freezed or the command 
insmod never returned ?

Alexis.



^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-11-07 23:07                                   ` Alexis Berlemont
@ 2007-11-07 23:23                                     ` Leopold Palomo Avellaneda
  0 siblings, 0 replies; 29+ messages in thread
From: Leopold Palomo Avellaneda @ 2007-11-07 23:23 UTC (permalink / raw)
  To: xenomai

[-- Attachment #1: Type: text/plain, Size: 446 bytes --]

A Dijous 08 Novembre 2007, Alexis Berlemont va escriure:
> Hi,
>
> > jr3pci: no version for "comedi_add_drv" found: kernel tainted.
> > comedi_add_drv: name=jr3_pci
> > comedi_lct_drv: name=jr3_pci
> >
> > console blocked ....
>
> By "console blocked",  you meant your whole system was freezed or the
> command insmod never returned ?

command insmod never returned

Leo


-- 
--
Linux User 152692
PGP: 0xF944807E
Catalonia

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-11-07 15:12                                 ` Leopold Palomo-Avellaneda
  2007-11-07 23:07                                   ` Alexis Berlemont
@ 2007-11-07 23:12                                   ` Alexis Berlemont
  2007-11-07 23:24                                     ` Leopold Palomo Avellaneda
  2007-11-07 23:50                                   ` Alexis Berlemont
  2 siblings, 1 reply; 29+ messages in thread
From: Alexis Berlemont @ 2007-11-07 23:12 UTC (permalink / raw)
  To: xenomai

Hi,

> jr3pci: no version for "comedi_add_drv" found: kernel tainted.
> comedi_add_drv: name=jr3_pci
> comedi_lct_drv: name=jr3_pci

Could you remind me which kernel version / xenomai version, you are using ?

I do not manage to reproduce the problem (at least, it works for me... ;) ).

Regards.

Alexis.



^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-11-07 23:12                                   ` Alexis Berlemont
@ 2007-11-07 23:24                                     ` Leopold Palomo Avellaneda
  2007-11-08 23:14                                       ` Alexis Berlemont
  0 siblings, 1 reply; 29+ messages in thread
From: Leopold Palomo Avellaneda @ 2007-11-07 23:24 UTC (permalink / raw)
  To: xenomai

[-- Attachment #1: Type: text/plain, Size: 624 bytes --]

A Dijous 08 Novembre 2007, Alexis Berlemont va escriure:
> Hi,
>
> > jr3pci: no version for "comedi_add_drv" found: kernel tainted.
> > comedi_add_drv: name=jr3_pci
> > comedi_lct_drv: name=jr3_pci
>
> Could you remind me which kernel version / xenomai version, you are using ?

2.6.22 + xenomai-2.4-rc5 (the lastest)
and I have tested:
2.6.23 + xenomai-2.4-rc5 (the lastest)

> I do not manage to reproduce the problem (at least, it works for me... ;)

I have had several problems with that box with rtnet and apics, maybe it is.

Regards,

Leo

-- 
--
Linux User 152692
PGP: 0xF944807E
Catalonia

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-11-07 23:24                                     ` Leopold Palomo Avellaneda
@ 2007-11-08 23:14                                       ` Alexis Berlemont
  2007-11-08 23:37                                         ` Leopold Palomo Avellaneda
  0 siblings, 1 reply; 29+ messages in thread
From: Alexis Berlemont @ 2007-11-08 23:14 UTC (permalink / raw)
  To: xenomai

Hi,

> > > jr3pci: no version for "comedi_add_drv" found: kernel tainted.
> > > comedi_add_drv: name=jr3_pci
> > > comedi_lct_drv: name=jr3_pci
> >
> > Could you remind me which kernel version / xenomai version, you are using
> > ?
>
> 2.6.22 + xenomai-2.4-rc5 (the lastest)
> and I have tested:
> 2.6.23 + xenomai-2.4-rc5 (the lastest)

Even with your configurations, I am still unable to reproduce the problem.

Could you send me your kernel configuration file?

Could you check the CPU charge (is the CPU idle?) after having "insmoded" 
jr3pci.ko?

Many thanks in advance.

Alexis.



^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-11-08 23:14                                       ` Alexis Berlemont
@ 2007-11-08 23:37                                         ` Leopold Palomo Avellaneda
  2007-11-12  0:55                                           ` Alexis Berlemont
  0 siblings, 1 reply; 29+ messages in thread
From: Leopold Palomo Avellaneda @ 2007-11-08 23:37 UTC (permalink / raw)
  To: xenomai


[-- Attachment #1.1: Type: text/plain, Size: 2777 bytes --]

A Divendres 09 Novembre 2007, Alexis Berlemont va escriure:
> Hi,
>
> > > > jr3pci: no version for "comedi_add_drv" found: kernel tainted.
> > > > comedi_add_drv: name=jr3_pci
> > > > comedi_lct_drv: name=jr3_pci
> > >
> > > Could you remind me which kernel version / xenomai version, you are
> > > using ?
> >
> > 2.6.22 + xenomai-2.4-rc5 (the lastest)
> > and I have tested:
> > 2.6.23 + xenomai-2.4-rc5 (the lastest)
>
> Even with your configurations, I am still unable to reproduce the problem.

problably my box doesn't like xenomai :-(

> Could you send me your kernel configuration file?

send ... 

> Could you check the CPU charge (is the CPU idle?) after having "insmoded"
> jr3pci.ko?

yes,

top - 00:35:00 up  5:10,  2 users,  load average: 1.13, 0.26, 0.08
Tasks:  93 total,   5 running,  88 sleeping,   0 stopped,   0 zombie
Cpu(s):  0.0%us, 50.2%sy,  0.0%ni, 49.8%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st
Mem:   1998464k total,   205864k used,  1792600k free,    19640k buffers
Swap:  1951856k total,        0k used,  1951856k free,    75224k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
 3138 root      20   0  2640  364  264 R  100  0.0   0:24.00 insmod
 2654 root      20   0 12704  608  448 S    1  0.0   0:00.48 atieventsd
    1 root      20   0  6128  688  568 S    0  0.0   0:00.50 init
    2 root      15  -5     0    0    0 S    0  0.0   0:00.00 kthreadd
    3 root      RT  -5     0    0    0 S    0  0.0   0:00.00 migration/0
    4 root      15  -5     0    0    0 S    0  0.0   0:00.00 ksoftirqd/0
    5 root      RT  -5     0    0    0 S    0  0.0   0:00.00 watchdog/0
    6 root      RT  -5     0    0    0 R    0  0.0   0:00.00 migration/1
    7 root      15  -5     0    0    0 R    0  0.0   0:00.00 ksoftirqd/1


also, I have checked the irqs and assignment an irq 7 to the pci jr3card. So, 
it doesn't share any irq as I know

          CPU0       CPU1
  0:        281    4611392   IO-APIC-edge      timer, rthal_broadcast_timer
  1:          0         10   IO-APIC-edge      i8042
  2:          0          0    XT-PIC-XT        cascade
  8:          0          0   IO-APIC-edge      rtc
 10:          0      18888   IO-APIC-fasteoi   ehci_hcd:usb1, sata_nv, sata_nv
 11:          0        577   IO-APIC-fasteoi   firewire_ohci
 12:          0        113   IO-APIC-edge      i8042
 14:          9     165276   IO-APIC-edge      ide0
 15:          0          0   IO-APIC-fasteoi   ohci_hcd:usb2, HDA Intel
1279:        219    1910687   PCI-MSI-edge      eth1
NMI:          0          0
LOC:    4611634    4611610
ERR:          0

> Many thanks in advance.

not, thank's to you.

Leo




-- 
--
Linux User 152692
PGP: 0xF944807E
Catalonia

[-- Attachment #1.2: config-xenomai-2.6.23 --]
[-- Type: text/plain, Size: 74983 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.23-xenomai-2.4-rc5
# Wed Nov  7 16:37:35 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_CPUSETS=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"

#
# Real-time sub-system
#
CONFIG_XENOMAI=y
CONFIG_XENO_OPT_NUCLEUS=y
CONFIG_XENO_OPT_PERVASIVE=y
# CONFIG_XENO_OPT_ISHIELD is not set
CONFIG_XENO_OPT_PRIOCPL=y
CONFIG_XENO_OPT_PIPELINE_HEAD=y
CONFIG_XENO_OPT_PIPE=y
CONFIG_XENO_OPT_MAP=y
CONFIG_XENO_OPT_PIPE_NRDEV=32
CONFIG_XENO_OPT_REGISTRY=y
CONFIG_XENO_OPT_REGISTRY_NRSLOTS=1000
CONFIG_XENO_OPT_SYS_HEAPSZ=128
CONFIG_XENO_OPT_STATS=y
# CONFIG_XENO_OPT_DEBUG is not set
CONFIG_XENO_OPT_SHIRQ=y

#
# Timing
#
CONFIG_XENO_OPT_TIMING_PERIODIC=y
CONFIG_XENO_OPT_TIMING_SCHEDLAT=0

#
# Scalability
#
# CONFIG_XENO_OPT_SCALABLE_SCHED is not set
CONFIG_XENO_OPT_TIMER_LIST=y
# CONFIG_XENO_OPT_TIMER_HEAP is not set
# CONFIG_XENO_OPT_TIMER_WHEEL is not set

#
# Machine
#
CONFIG_XENO_HW_FPU=y

#
# SMI workaround
#
# CONFIG_XENO_HW_SMI_DETECT_DISABLE is not set
CONFIG_XENO_HW_SMI_DETECT=y
CONFIG_XENO_HW_SMI_WORKAROUND=y
CONFIG_XENO_HW_SMI_ALL=y

#
# Interfaces
#
CONFIG_XENO_SKIN_NATIVE=y
CONFIG_XENO_OPT_NATIVE_PERIOD=0
CONFIG_XENO_OPT_NATIVE_PIPE=y
CONFIG_XENO_OPT_NATIVE_PIPE_BUFSZ=1024
CONFIG_XENO_OPT_NATIVE_REGISTRY=y
CONFIG_XENO_OPT_NATIVE_SEM=y
CONFIG_XENO_OPT_NATIVE_EVENT=y
CONFIG_XENO_OPT_NATIVE_MUTEX=y
CONFIG_XENO_OPT_NATIVE_COND=y
CONFIG_XENO_OPT_NATIVE_QUEUE=y
CONFIG_XENO_OPT_NATIVE_HEAP=y
CONFIG_XENO_OPT_NATIVE_ALARM=y
CONFIG_XENO_OPT_NATIVE_MPS=y
# CONFIG_XENO_OPT_NATIVE_INTR is not set
CONFIG_XENO_SKIN_POSIX=y
CONFIG_XENO_OPT_POSIX_PERIOD=0
# CONFIG_XENO_OPT_POSIX_SHM is not set
# CONFIG_XENO_OPT_POSIX_INTR is not set
CONFIG_XENO_OPT_DEBUG_POSIX=y
# CONFIG_XENO_SKIN_PSOS is not set
# CONFIG_XENO_SKIN_UITRON is not set
CONFIG_XENO_SKIN_VRTX=m
CONFIG_XENO_OPT_VRTX_PERIOD=1000
CONFIG_XENO_SKIN_VXWORKS=m
CONFIG_XENO_OPT_VXWORKS_PERIOD=1000
CONFIG_XENO_SKIN_RTAI=m
CONFIG_XENO_OPT_RTAI_PERIOD=0
CONFIG_XENO_OPT_RTAI_FIFO=y
CONFIG_XENO_OPT_RTAI_SEM=y
CONFIG_XENO_OPT_RTAI_SHM=y
CONFIG_XENO_SKIN_RTDM=y
CONFIG_XENO_OPT_RTDM_PERIOD=0
CONFIG_XENO_OPT_RTDM_FILDES=128

#
# Drivers
#

#
# Serial drivers
#
CONFIG_XENO_DRIVERS_16550A=m
CONFIG_XENO_DRIVERS_16550A_PIO=y
# CONFIG_XENO_DRIVERS_16550A_MMIO is not set
# CONFIG_XENO_DRIVERS_16550A_ANY is not set

#
# Testing drivers
#
CONFIG_XENO_DRIVERS_TIMERBENCH=m
CONFIG_XENO_DRIVERS_IRQBENCH=m
CONFIG_XENO_DRIVERS_SWITCHTEST=m

#
# CAN drivers
#
CONFIG_XENO_DRIVERS_CAN=m
CONFIG_XENO_DRIVERS_CAN_DEBUG=y
# CONFIG_XENO_DRIVERS_CAN_LOOPBACK is not set
CONFIG_XENO_DRIVERS_CAN_RXBUF_SIZE=1024
CONFIG_XENO_DRIVERS_CAN_MAX_DEVICES=4
CONFIG_XENO_DRIVERS_CAN_MAX_RECEIVERS=16
# CONFIG_XENO_DRIVERS_CAN_BUS_ERR is not set
# CONFIG_XENO_DRIVERS_CAN_VIRT is not set
# CONFIG_XENO_DRIVERS_CAN_SJA1000 is not set

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_BKL is not set
CONFIG_IPIPE=y
CONFIG_IPIPE_DOMAINS=4
CONFIG_IPIPE_COMPAT=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_NODES_SHIFT=6
# CONFIG_X86_64_ACPI_NUMA is not set
# CONFIG_NUMA_EMU is not set
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y
CONFIG_NR_CPUS=32
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y

#
# Power management options
#
# CONFIG_PM is not set
CONFIG_SUSPEND_SMP_POSSIBLE=y
CONFIG_HIBERNATION_SMP_POSSIBLE=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_TIPC=m
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_ZONES=3
CONFIG_TIPC_CLUSTERS=1
CONFIG_TIPC_NODES=255
CONFIG_TIPC_SLAVE_NODES=0
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_FIFO=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_RR is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_CLS_POLICE is not set
CONFIG_NET_CLS_IND=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m

#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m

#
# Old SIR device drivers
#

#
# Old Serial dongle support
#

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y

#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PNC2000=m
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
# CONFIG_MTD_SCB2_FLASH is not set
CONFIG_MTD_NETtel=m
CONFIG_MTD_DILNETPC=m
CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
CONFIG_MTD_PLATRAM=m

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
# CONFIG_MTD_NAND_NANDSIM is not set
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_OTP is not set

#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set

#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
# CONFIG_PARIDE_EPATC8 is not set
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
# CONFIG_BLK_CPQ_DA is not set
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
# CONFIG_EEPROM_93CX6 is not set
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=m
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CY82C693=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_HPT34X=m
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_JMICRON=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
# CONFIG_BLK_DEV_IT8213 is not set
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_PDC202XX_BURST=y
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_ATA is not set
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_ARCMSR=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_SRP=m
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_AHCI=m
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIL24=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_INIC162X=m
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
CONFIG_PATA_EFAR=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_MARVELL=m
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_RADISYS=m
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=m
# CONFIG_PATA_VIA is not set
CONFIG_PATA_WINBOND=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
# CONFIG_DM_MULTIPATH_RDAC is not set
CONFIG_DM_DELAY=m

#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
# CONFIG_IEEE1394 is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
# CONFIG_ICPLUS_PHY is not set
CONFIG_FIXED_PHY=m
# CONFIG_FIXED_MII_10_FDX is not set
# CONFIG_FIXED_MII_100_FDX is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_HP100=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_PCNET32_NAPI=y
CONFIG_AMD8111_ETH=m
CONFIG_AMD8111E_NAPI=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_B44=m
CONFIG_FORCEDETH=m
# CONFIG_FORCEDETH_NAPI is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_RHINE_NAPI=y
CONFIG_SC92031=m
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
# CONFIG_SK98LIN is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=m
CONFIG_ATL1=m
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1_NAPI=y
CONFIG_CHELSIO_T3=m
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
CONFIG_MYRI10GE=m
CONFIG_NETXEN_NIC=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_TR=y
CONFIG_IBMOL=m
# CONFIG_3C359 is not set
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_ABYSS=m

#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
CONFIG_WLAN_80211=y
CONFIG_PCMCIA_RAYCS=m
# CONFIG_IPW2100 is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
# CONFIG_IPW2200_RADIOTAP is not set
# CONFIG_IPW2200_PROMISCUOUS is not set
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
# CONFIG_RTL8187 is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_BCM43XX=m
CONFIG_BCM43XX_DEBUG=y
CONFIG_BCM43XX_DMA=y
CONFIG_BCM43XX_PIO=y
CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET_MII=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_ARCNET_COM20020_CS=m
CONFIG_WAN=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300=m
CONFIG_PC300_MLPPP=y

#
# Cyclades-PC300 MLPPP support is disabled.
#

#
# Refer to the file README.mlppp, provided by PC300 package.
#
# CONFIG_PC300TOO is not set
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=m
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
CONFIG_ATM_FORE200E_PCA=y
CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_FORE200E=m
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_FDDI=y
CONFIG_DEFXX=m
# CONFIG_DEFXX_MMIO is not set
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_ISDN=m
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m

#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set

#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m

#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y

#
# Active cards
#
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
# CONFIG_GIGASET_UNDOCREQ is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
# CONFIG_JOYSTICK_XPAD_FF is not set
# CONFIG_JOYSTICK_XPAD_LEDS is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_DIGIEPCA=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_MOXA_SMARTIO_NEW=m
CONFIG_ISI=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=m
CONFIG_RIO=m
CONFIG_RIO_OLDPCI=y
CONFIG_STALDRV=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=16
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_TIPAR=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
# CONFIG_ITCO_VENDOR_SUPPORT is not set
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_NVRAM=m
CONFIG_RTC=y
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_MWAVE=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_STUB=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m

#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
# CONFIG_SPI_LM70_LLP is not set

#
# SPI Protocol Masters
#
CONFIG_SPI_AT25=m
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_W1=m
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
# CONFIG_SENSORS_ABITUGURU3 is not set
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Multifunction device drivers
#
CONFIG_MFD_SM501=m

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA7111=m
CONFIG_VIDEO_SAA7114=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
# CONFIG_TUNER_TEA5761 is not set
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_OSS=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_V4L_USB_DRIVERS=y
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_29XXX=y
CONFIG_VIDEO_PVRUSB2_24XXX=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_ZR364XX=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_USB_DSBR=m
CONFIG_DVB_CORE=m
CONFIG_DVB_CORE_ATTACH=y
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m

#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
# CONFIG_DVB_USB_AF9005 is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
# CONFIG_DVB_CINERGYT2_TUNING is not set

#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set

#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m

#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m

#
# Supported DVB Frontends
#

#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_STV0299=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_TDA10086=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m

#
# Tuners/PLL support
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TDA827X=m
CONFIG_DVB_TUNER_QT1010=m
CONFIG_DVB_TUNER_MT2060=m

#
# Miscellaneous devices
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_TUA6100=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_PROGEAR=m

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m

#
# Display hardware drivers
#
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
CONFIG_FB_HECUBA=m
CONFIG_FB_HGA=m
# CONFIG_FB_HGA_ACCEL is not set
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
# CONFIG_FB_TRIDENT_ACCEL is not set
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
# CONFIG_FB_GEODE is not set
CONFIG_FB_SM501=m
CONFIG_FB_VIRTUAL=m

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_SB_COMMON=m

#
# PCI devices
#
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5530 is not set
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL=y
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
CONFIG_SND_AC97_POWER_SAVE=y

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y

#
# PCMCIA devices
#
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_TRIDENT=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
CONFIG_SOUND_SB=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0x0
# CONFIG_AEDSP16_MSS is not set
# CONFIG_AEDSP16_SBPRO is not set
CONFIG_SOUND_KAHLUA=m
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT_POWERBOOK=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_MON=y

#
# USB port drivers
#
CONFIG_USB_USS720=m

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m
CONFIG_USB_EZUSB=y

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m

#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set

#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y

#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=m
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_M41T80 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_MAX6902=m

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_M48T86=m
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#

#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
# CONFIG_AUXDISPLAY is not set
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=m
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m

#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Distributed Lock Manager
#
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y

#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
# CONFIG_KPROBES is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_IPIPE_DEBUG is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_HW=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-11-08 23:37                                         ` Leopold Palomo Avellaneda
@ 2007-11-12  0:55                                           ` Alexis Berlemont
  2007-11-12  9:22                                             ` Leopold Palomo-Avellaneda
  2007-11-12  9:25                                             ` Leopold Palomo-Avellaneda
  0 siblings, 2 replies; 29+ messages in thread
From: Alexis Berlemont @ 2007-11-12  0:55 UTC (permalink / raw)
  To: lepalom, xenomai

[-- Attachment #1: Type: text/plain, Size: 359 bytes --]

Hi,


> > Could you send me your kernel configuration file?
>
> send ...
>

Thanks to your configuration file, I was able to reproduce the bug on my emulator.

It was one of my many bugs: a queue initialization was missing. Then, a spinlock was not initialized and triggers in your case the spinning of the task insmod.

Fixed in svn. Please update.

Alexis.

[-- Attachment #2: Type: text/html, Size: 1135 bytes --]

^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-11-12  0:55                                           ` Alexis Berlemont
@ 2007-11-12  9:22                                             ` Leopold Palomo-Avellaneda
  2007-11-12  9:25                                             ` Leopold Palomo-Avellaneda
  1 sibling, 0 replies; 29+ messages in thread
From: Leopold Palomo-Avellaneda @ 2007-11-12  9:22 UTC (permalink / raw)
  To: Alexis Berlemont; +Cc: xenomai

A Dilluns 12 Novembre 2007, Alexis Berlemont va escriure:
> Hi,
>
> > > Could you send me your kernel configuration file?
> >
> > send ...
>
> Thanks to your configuration file, I was able to reproduce the bug on my
> emulator.
>
> It was one of my many bugs: a queue initialization was missing. Then, a
> spinlock was not initialized and triggers in your case the spinning of the
> task insmod.
>
> Fixed in svn. Please update.
>

great!!!

Also I forgot to say that I have a different idm file of the firware of the 
card ...

Leo



^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-11-12  0:55                                           ` Alexis Berlemont
  2007-11-12  9:22                                             ` Leopold Palomo-Avellaneda
@ 2007-11-12  9:25                                             ` Leopold Palomo-Avellaneda
  1 sibling, 0 replies; 29+ messages in thread
From: Leopold Palomo-Avellaneda @ 2007-11-12  9:25 UTC (permalink / raw)
  To: Alexis Berlemont; +Cc: xenomai

A Dilluns 12 Novembre 2007, Alexis Berlemont va escriure:
> Hi,
>
> > > Could you send me your kernel configuration file?
> >
> > send ...
>
> Thanks to your configuration file, I was able to reproduce the bug on my
> emulator.
>
> It was one of my many bugs: a queue initialization was missing. Then, a
> spinlock was not initialized and triggers in your case the spinning of the
> task insmod.
>
> Fixed in svn. Please update.

updated, compiled, executed and no problem :-)

jr3pci: no version for "comedi_add_drv" found: kernel tainted.
comedi_add_drv: name=jr3_pci
comedi_lct_drv: name=jr3_pci

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
 8469 palomo    20   0 45200 4080 2912 R    1  0.2   0:00.04 top
    1 root      20   0  6128  692  568 S    0  0.0   0:01.10 init
    2 root      15  -5     0    0    0 S    0  0.0   0:00.00 kthreadd


Leo


^ permalink raw reply	[flat|nested] 29+ messages in thread

* Re: [Xenomai-help] Comedi driver for use with xenomai
  2007-11-07 15:12                                 ` Leopold Palomo-Avellaneda
  2007-11-07 23:07                                   ` Alexis Berlemont
  2007-11-07 23:12                                   ` Alexis Berlemont
@ 2007-11-07 23:50                                   ` Alexis Berlemont
  2 siblings, 0 replies; 29+ messages in thread
From: Alexis Berlemont @ 2007-11-07 23:50 UTC (permalink / raw)
  To: xenomai

> > > jr3pci: no version for "comedi_add_drv" found: kernel tainted.

After having a quick look at linux/kernel/module.c, it appears this warning is 
only printed if the option "CONFIG_MODVERSIONS" is enabled in your kernel 
configuration.

The symbol is resolved but its version is not found. I do not know why yet 
(maybe because the symbol is located in comedi not in the kernel...).

Disabling "CONFIG_MODVERSIONS" will not solve your "console hanged" problem as 
the module seems properly loaded and the module_init function is called.

Alexis.

^ permalink raw reply	[flat|nested] 29+ messages in thread

end of thread, other threads:[~2007-11-12  9:25 UTC | newest]

Thread overview: 29+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-09-20 13:49 [Xenomai-help] Comedi driver for use with xenomai Leopold Palomo-Avellaneda
2007-09-20 22:36 ` Alexis Berlemont
2007-09-21  7:10   ` Leopold Palomo Avellaneda
2007-09-21  8:43     ` Anders Blomdell
2007-09-21 12:51       ` Leopold Palomo-Avellaneda
2007-09-21 13:36         ` Anders Blomdell
2007-09-24 20:33           ` Alexis Berlemont
2007-09-25  8:26             ` Leopold Palomo-Avellaneda
2007-10-29 17:58             ` Leopold Palomo-Avellaneda
2007-10-29 22:55               ` Alexis Berlemont
2007-10-30 14:24                 ` Leopold Palomo-Avellaneda
2007-10-30 14:34                   ` Jan Kiszka
2007-10-30 15:04                     ` Leopold Palomo-Avellaneda
2007-10-31  0:17                       ` Alexis Berlemont
2007-10-31  9:36                         ` Leopold Palomo Avellaneda
2007-11-05 23:32                           ` Alexis Berlemont
2007-11-06 10:02                             ` Leopold Palomo-Avellaneda
2007-11-07 14:56                               ` Jan Kiszka
2007-11-07 15:12                                 ` Leopold Palomo-Avellaneda
2007-11-07 23:07                                   ` Alexis Berlemont
2007-11-07 23:23                                     ` Leopold Palomo Avellaneda
2007-11-07 23:12                                   ` Alexis Berlemont
2007-11-07 23:24                                     ` Leopold Palomo Avellaneda
2007-11-08 23:14                                       ` Alexis Berlemont
2007-11-08 23:37                                         ` Leopold Palomo Avellaneda
2007-11-12  0:55                                           ` Alexis Berlemont
2007-11-12  9:22                                             ` Leopold Palomo-Avellaneda
2007-11-12  9:25                                             ` Leopold Palomo-Avellaneda
2007-11-07 23:50                                   ` Alexis Berlemont

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.