From: Boaz Harrosh <bharrosh@panasas.com>
To: malahal@us.ibm.com
Cc: linux-scsi@vger.kernel.org, Achim_Leubner@adaptec.com,
jens.axboe@oracle.com
Subject: Re: [PATCH] gdth: scp timeout clean up
Date: Tue, 06 Nov 2007 09:54:15 +0200 [thread overview]
Message-ID: <47301DA7.8000202@panasas.com> (raw)
In-Reply-To: <20071106065439.GA30397@us.ibm.com>
On Tue, Nov 06 2007 at 8:54 +0200, malahal@us.ibm.com wrote:
> gdth driver is modified NOT to use scp->eh_timeout. Now, it has
> eh_timed_out (gdth_timed_out) to handle command timeouts for locked
> I/O's. Have not tested as I don't have needed hardware! Patch is
> against 2.6.23-mm1.
>
> Thank you Matthew Wilcox for your input on the IRC channel.
>
> Signed-off-by: Malahal Naineni <malahal@us.ibm.com>
>
> diff -r dbb45a1edd2a drivers/scsi/gdth.c
> --- a/drivers/scsi/gdth.c Mon Nov 05 21:32:26 2007 -0800
> +++ b/drivers/scsi/gdth.c Mon Nov 05 21:54:27 2007 -0800
> @@ -2056,22 +2056,12 @@ static void gdth_putq(gdth_ha_str *ha, S
> register Scsi_Cmnd *pscp;
> register Scsi_Cmnd *nscp;
> ulong flags;
> - unchar b, t;
>
> TRACE(("gdth_putq() priority %d\n",priority));
> spin_lock_irqsave(&ha->smp_lock, flags);
>
> if (!cmndinfo->internal_command) {
> cmndinfo->priority = priority;
> - b = scp->device->channel;
> - t = scp->device->id;
> - if (priority >= DEFAULT_PRI) {
> - if ((b != ha->virt_bus && ha->raw[BUS_L2P(ha,b)].lock) ||
> - (b==ha->virt_bus && t<MAX_HDRIVES && ha->hdr[t].lock)) {
> - TRACE2(("gdth_putq(): locked IO ->update_timeout()\n"));
> - cmndinfo->timeout = gdth_update_timeout(scp, 0);
> - }
> - }
> }
>
> if (ha->req_first==NULL) {
> @@ -2359,7 +2349,7 @@ static void gdth_copy_internal_data(gdth
> {
> ushort cpcount,i, max_sg = gdth_sg_count(scp);
> ushort cpsum,cpnow;
> - struct scatterlist *sl, *sg;
> + struct scatterlist *sl;
> char *address;
>
> cpcount = min_t(ushort, count, gdth_bufflen(scp));
> @@ -3938,6 +3928,38 @@ static const char *gdth_info(struct Scsi
> return ((const char *)ha->binfo.type_string);
> }
>
> +static enum scsi_eh_timer_return gdth_timed_out(struct scsi_cmnd *scp)
> +{
> + gdth_ha_str *ha = shost_priv(scp->device->host);
> + struct gdth_cmndinfo *cmndinfo = gdth_get_cmndinfo(ha);
a gdth_get_cmndinfo(ha) is for allocating a new cmndinfo out of free
cmndinfo list, and must be paired by a call to gdth_put_cmndinfo(ha).
And usually you want to put it on scp->host_scribble, other wise it will
be lost.
To get the cmndinfo associated with a scsi_cmnd use gdth_cmnd_priv(scp)
> + unchar b, t;
> + ulong flags;
> + enum scsi_eh_timer_return retval = EH_NOT_HANDLED;
> +
> + TRACE(("%s() cmd 0x%x\n", scp->cmnd[0], __FUNCTION__));
> + b = scp->device->channel;
> + t = scp->device->id;
> +
> + /*
> + * We don't really honor the command timeout, but we try to
> + * honor 6 times of the actual command timeout! So reset the
> + * timer if this is less than 6th timeout on this command!
> + */
> + if (++cmndinfo->timeout_count < 6)
> + retval = EH_RESET_TIMER;
> +
> + /* Reset the timeout if it is locked IO */
> + spin_lock_irqsave(&ha->smp_lock, flags);
> + if ((b != ha->virt_bus && ha->raw[BUS_L2P(ha, b)].lock) ||
> + (b == ha->virt_bus && t < MAX_HDRIVES && ha->hdr[t].lock)) {
> + TRACE2(("%s(): locked IO, reset timeout\n", __FUNCTION__));
> + retval = EH_RESET_TIMER;
> + }
> + spin_unlock_irqrestore(&ha->smp_lock, flags);
> +
> + return retval;
> +}
> +
> static int gdth_eh_bus_reset(Scsi_Cmnd *scp)
> {
> gdth_ha_str *ha = shost_priv(scp->device->host);
> @@ -4031,7 +4053,7 @@ static int gdth_queuecommand(struct scsi
> BUG_ON(!cmndinfo);
>
> scp->scsi_done = done;
> - gdth_update_timeout(scp, scp->timeout_per_command * 6);
> + cmndinfo->timeout_count = 0;
> cmndinfo->priority = DEFAULT_PRI;
>
> gdth_set_bufflen(scp, scsi_bufflen(scp));
> @@ -4137,12 +4159,10 @@ static int ioc_lockdrv(void __user *arg)
> ha->hdr[j].lock = 1;
> spin_unlock_irqrestore(&ha->smp_lock, flags);
> gdth_wait_completion(ha, ha->bus_cnt, j);
> - gdth_stop_timeout(ha, ha->bus_cnt, j);
> } else {
> spin_lock_irqsave(&ha->smp_lock, flags);
> ha->hdr[j].lock = 0;
> spin_unlock_irqrestore(&ha->smp_lock, flags);
> - gdth_start_timeout(ha, ha->bus_cnt, j);
> gdth_next(ha);
> }
> }
> @@ -4582,14 +4602,12 @@ static int gdth_ioctl(struct inode *inod
> spin_unlock_irqrestore(&ha->smp_lock, flags);
> for (j = 0; j < ha->tid_cnt; ++j) {
> gdth_wait_completion(ha, i, j);
> - gdth_stop_timeout(ha, i, j);
> }
> } else {
> spin_lock_irqsave(&ha->smp_lock, flags);
> ha->raw[i].lock = 0;
> spin_unlock_irqrestore(&ha->smp_lock, flags);
> for (j = 0; j < ha->tid_cnt; ++j) {
> - gdth_start_timeout(ha, i, j);
> gdth_next(ha);
> }
> }
> @@ -4724,6 +4742,7 @@ static struct scsi_host_template gdth_te
> .slave_configure = gdth_slave_configure,
> .bios_param = gdth_bios_param,
> .proc_info = gdth_proc_info,
> + .eh_timed_out = gdth_timed_out,
> .proc_name = "gdth",
> .can_queue = GDTH_MAXCMDS,
> .this_id = -1,
> diff -r dbb45a1edd2a drivers/scsi/gdth.h
> --- a/drivers/scsi/gdth.h Mon Nov 05 21:32:26 2007 -0800
> +++ b/drivers/scsi/gdth.h Mon Nov 05 21:55:15 2007 -0800
> @@ -917,7 +917,7 @@ typedef struct {
> int internal_command; /* don't call scsi_done */
> dma_addr_t sense_paddr; /* sense dma-addr */
> unchar priority;
> - int timeout;
> + int timeout_count; /* # of timeout calls */
> volatile int wait_for_completion;
> ushort status;
> ulong32 info;
> diff -r dbb45a1edd2a drivers/scsi/gdth_proc.c
> --- a/drivers/scsi/gdth_proc.c Mon Nov 05 21:32:26 2007 -0800
> +++ b/drivers/scsi/gdth_proc.c Mon Nov 05 21:32:31 2007 -0800
> @@ -750,69 +750,3 @@ static void gdth_wait_completion(gdth_ha
> }
> spin_unlock_irqrestore(&ha->smp_lock, flags);
> }
> -
> -static void gdth_stop_timeout(gdth_ha_str *ha, int busnum, int id)
> -{
> - ulong flags;
> - Scsi_Cmnd *scp;
> - unchar b, t;
> -
> - spin_lock_irqsave(&ha->smp_lock, flags);
> -
> - for (scp = ha->req_first; scp; scp = (Scsi_Cmnd *)scp->SCp.ptr) {
> - struct gdth_cmndinfo *cmndinfo = gdth_cmnd_priv(scp);
> - if (!cmndinfo->internal_command) {
> - b = scp->device->channel;
> - t = scp->device->id;
> - if (t == (unchar)id && b == (unchar)busnum) {
> - TRACE2(("gdth_stop_timeout(): update_timeout()\n"));
> - cmndinfo->timeout = gdth_update_timeout(scp, 0);
> - }
> - }
> - }
> - spin_unlock_irqrestore(&ha->smp_lock, flags);
> -}
> -
> -static void gdth_start_timeout(gdth_ha_str *ha, int busnum, int id)
> -{
> - ulong flags;
> - Scsi_Cmnd *scp;
> - unchar b, t;
> -
> - spin_lock_irqsave(&ha->smp_lock, flags);
> -
> - for (scp = ha->req_first; scp; scp = (Scsi_Cmnd *)scp->SCp.ptr) {
> - struct gdth_cmndinfo *cmndinfo = gdth_cmnd_priv(scp);
> - if (!cmndinfo->internal_command) {
> - b = scp->device->channel;
> - t = scp->device->id;
> - if (t == (unchar)id && b == (unchar)busnum) {
> - TRACE2(("gdth_start_timeout(): update_timeout()\n"));
> - gdth_update_timeout(scp, cmndinfo->timeout);
> - }
> - }
> - }
> - spin_unlock_irqrestore(&ha->smp_lock, flags);
> -}
> -
> -static int gdth_update_timeout(Scsi_Cmnd *scp, int timeout)
> -{
> - int oldto;
> -
> - oldto = scp->timeout_per_command;
> - scp->timeout_per_command = timeout;
> -
> - if (timeout == 0) {
> - del_timer(&scp->eh_timeout);
> - scp->eh_timeout.data = (unsigned long) NULL;
> - scp->eh_timeout.expires = 0;
> - } else {
> - if (scp->eh_timeout.data != (unsigned long) NULL)
> - del_timer(&scp->eh_timeout);
> - scp->eh_timeout.data = (unsigned long) scp;
> - scp->eh_timeout.expires = jiffies + timeout;
> - add_timer(&scp->eh_timeout);
> - }
> -
> - return oldto;
> -}
> diff -r dbb45a1edd2a drivers/scsi/gdth_proc.h
> --- a/drivers/scsi/gdth_proc.h Mon Nov 05 21:32:26 2007 -0800
> +++ b/drivers/scsi/gdth_proc.h Mon Nov 05 21:32:31 2007 -0800
> @@ -20,9 +20,6 @@ static char *gdth_ioctl_alloc(gdth_ha_st
> ulong64 *paddr);
> static void gdth_ioctl_free(gdth_ha_str *ha, int size, char *buf, ulong64 paddr);
> static void gdth_wait_completion(gdth_ha_str *ha, int busnum, int id);
> -static void gdth_stop_timeout(gdth_ha_str *ha, int busnum, int id);
> -static void gdth_start_timeout(gdth_ha_str *ha, int busnum, int id);
> -static int gdth_update_timeout(Scsi_Cmnd *scp, int timeout);
>
> #endif
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Boaz
next prev parent reply other threads:[~2007-11-06 7:58 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-06 6:54 [PATCH] gdth: scp timeout clean up malahal
2007-11-06 7:54 ` Boaz Harrosh [this message]
2007-11-06 16:18 ` malahal
2007-11-06 22:34 ` [PATCH] gdth: scp timeout clean up (try #2) malahal
2007-11-07 13:22 ` Jens Axboe
2007-11-14 2:39 ` malahal
2007-12-03 1:53 ` [PATCH] blk request timeout minor fixes malahal
2007-12-03 2:49 ` Matthew Wilcox
2007-12-03 23:47 ` malahal
2007-12-04 9:00 ` Jens Axboe
2007-12-05 20:05 ` malahal
2007-12-05 20:10 ` Jens Axboe
2007-12-05 20:40 ` malahal
2007-12-05 21:06 ` Another use for block-layer timeouts Matthew Wilcox
2007-11-07 17:35 ` [PATCH] gdth: scp timeout clean up (try #2) Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47301DA7.8000202@panasas.com \
--to=bharrosh@panasas.com \
--cc=Achim_Leubner@adaptec.com \
--cc=jens.axboe@oracle.com \
--cc=linux-scsi@vger.kernel.org \
--cc=malahal@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.