[U-Boot-Users] MX31 patch: boot code

[U-Boot-Users] MX31 patch: boot code

[llandre]

Hi,

I'm having a look at the patches you released for MX31 processor. In 
particular I'm comparing the early boot code with the one provided by 
Freescale along with Redboot.
If I did not miss something, I noted that some of the initializations 
performed by Freescale (AIPS, MAX, M3IF etc.) are not implemented in 
your code.
Am I right? If yes, do you think these are not strictly necessary?


Thanks in advance,
llandre

DAVE Electronics System House - R&D Department
web:   http://www.dave-tech.it
email: r&d2 at dave-tech.it

[U-Boot-Users] MX31 patch: boot code

[Robert Schwebel]

On Tue, Nov 13, 2007 at 05:55:28PM +0100, llandre wrote:
> I'm having a look at the patches you released for MX31 processor. In
> particular I'm comparing the early boot code with the one provided by
> Freescale along with Redboot.  If I did not miss something, I noted
> that some of the initializations performed by Freescale (AIPS, MAX,
> M3IF etc.) are not implemented in your code.  Am I right? If yes, do
> you think these are not strictly necessary?

We started with bringing up the board in a very minmal way, so it will
probably not initialize it completely.

Robert
-- 
 Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry
   Handelsregister:  Amtsgericht Hildesheim, HRA 2686
     Hannoversche Str. 2, 31134 Hildesheim, Germany
   Phone: +49-5121-206917-0 |  Fax: +49-5121-206917-9