All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tomi Sarvela <tomi.p.sarvela@intel.com>
To: Ander Conselvan De Oliveira <conselvan2@gmail.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: ✗ Fi.CI.BAT: failure for Unduplicate CHV phy code (rev5)
Date: Wed, 27 Apr 2016 17:39:35 +0300	[thread overview]
Message-ID: <4779737.mmujrAagpL@fractal> (raw)
In-Reply-To: <1461764173.2741.5.camel@gmail.com>

Hello,

On Wednesday 27 April 2016 16:36:13 Ander Conselvan De Oliveira wrote:
> >         Subgroup suspend-read-crc-pipe-a:
> >                 pass       -> INCOMPLETE (hsw-gt2)
> 
> dmesg ends with
> 
> [  505.669959] kms_pipe_crc_basic: starting subtest suspend-read-crc-pipe-A
> 
> Seems very unlikely this would be caused by this series. The only code that
> is run on hsw machines is setting the lane count field in crtc_state, but
> that is not used anywhere.
> 
> Are there any know issues with this machine?

There is no known issues with this hardware itself. There is one known issue 
with HSW and drm-intel kernel, which has taken a while to figure out. I think 
it still exists in the baseline kernel where patch is applied.

(It's hard to replicate with IGT, but newest Mesa seems to hit it quite 
regularly).

Regards,

Tomi




> 
> 
> Ander
> 
> > bdw-nuci7        total:200  pass:188  dwarn:0   dfail:0   fail:0   skip:12
> > bdw-ultra        total:200  pass:175  dwarn:0   dfail:0   fail:0   skip:25
> > bsw-nuc-2        total:199  pass:158  dwarn:0   dfail:0   fail:0   skip:41
> > byt-nuc          total:199  pass:158  dwarn:0   dfail:0   fail:0   skip:41
> > hsw-brixbox      total:200  pass:174  dwarn:0   dfail:0   fail:0   skip:26
> > hsw-gt2          total:199  pass:176  dwarn:0   dfail:0   fail:1   skip:21
> > ilk-hp8440p      total:200  pass:139  dwarn:0   dfail:0   fail:0   skip:61
> > ivb-t430s        total:200  pass:169  dwarn:0   dfail:0   fail:0   skip:31
> > skl-i7k-2        total:200  pass:173  dwarn:0   dfail:0   fail:0   skip:27
> > skl-nuci5        total:200  pass:189  dwarn:0   dfail:0   fail:0   skip:11
> > snb-dellxps      total:200  pass:157  dwarn:1   dfail:0   fail:0   skip:42
> > snb-x220t        total:200  pass:158  dwarn:0   dfail:0   fail:1   skip:41
> > 
> > Results at /archive/results/CI_IGT_test/Patchwork_2090/
> > 
> > 4fa405ab5848b76c8568c7fb771d389a6695108c drm-intel-nightly:
> > 2016y-04m-27d-10h -47m-35s UTC integration manifest
> > 9e163c0 drm/i915: Move VLV HDMI lane reset work around logic to
> > intel_dpio_phy.c
> > b7b843d drm/i915: Unduplicate pre encoder enabling phy code
> > 4165303 drm/i915: Unduplicate VLV phy pre pll enabling code
> > 7241e40 drm/i915: Unduplicate VLV signal level code
> > 1879a24 drm/i915: Unduplicate CHV encoders' post pll disable code
> > 3b54e74 drm/i915: Unduplicate CHV pre-encoder enabling phy logic
> > 66e88ec drm/i915: Unduplicate CHV phy-releated pre pll enabling code
> > 8a2b013 drm/i915: Unduplicate chv_data_lane_soft_reset()
> > 4a6d52d drm/i915: Unduplicate CHV signal level code
> > 5a20188 drm/i915: Set crtc_state->lane_count for HDMI

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2016-04-27 14:39 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-27 12:44 [PATCH v4 00/10] Unduplicate CHV phy code Ander Conselvan de Oliveira
2016-04-27 12:44 ` [PATCH v4 01/10] drm/i915: Set crtc_state->lane_count for HDMI Ander Conselvan de Oliveira
2016-04-27 12:44 ` [PATCH v4 02/10] drm/i915: Unduplicate CHV signal level code Ander Conselvan de Oliveira
2016-04-27 12:44 ` [PATCH v4 03/10] drm/i915: Unduplicate chv_data_lane_soft_reset() Ander Conselvan de Oliveira
2016-04-27 12:44 ` [PATCH v4 04/10] drm/i915: Unduplicate CHV phy-releated pre pll enabling code Ander Conselvan de Oliveira
2016-04-27 12:44 ` [PATCH v4 05/10] drm/i915: Unduplicate CHV pre-encoder enabling phy logic Ander Conselvan de Oliveira
2016-04-27 12:44 ` [PATCH v4 06/10] drm/i915: Unduplicate CHV encoders' post pll disable code Ander Conselvan de Oliveira
2016-04-27 12:44 ` [PATCH v4 07/10] drm/i915: Unduplicate VLV signal level code Ander Conselvan de Oliveira
2016-04-27 12:44 ` [PATCH v4 08/10] drm/i915: Unduplicate VLV phy pre pll enabling code Ander Conselvan de Oliveira
2016-04-27 12:44 ` [PATCH v4 09/10] drm/i915: Unduplicate pre encoder enabling phy code Ander Conselvan de Oliveira
2016-04-27 12:44 ` [PATCH v4 10/10] drm/i915: Move VLV HDMI lane reset work around logic to intel_dpio_phy.c Ander Conselvan de Oliveira
2016-04-27 13:23 ` ✗ Fi.CI.BAT: failure for Unduplicate CHV phy code (rev5) Patchwork
2016-04-27 13:36   ` Ander Conselvan De Oliveira
2016-04-27 14:39     ` Tomi Sarvela [this message]
2016-04-29  7:24       ` Ander Conselvan De Oliveira

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4779737.mmujrAagpL@fractal \
    --to=tomi.p.sarvela@intel.com \
    --cc=conselvan2@gmail.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.