From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Lucas Stach <l.stach@pengutronix.de>
Cc: Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
linux-arm-kernel@lists.infradead.org,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
patchwork-lst@pengutronix.de,
Luca Ceresoli <luca.ceresoli@bootlin.com>,
Richard Leitner <richard.leitner@skidata.com>
Subject: Re: [PATCH v3 2/2] phy: freescale: add Samsung HDMI PHY
Date: Thu, 07 Sep 2023 08:39:42 +0200 [thread overview]
Message-ID: <4830698.GXAFRqVoOG@steina-w> (raw)
In-Reply-To: <20230906184211.1857585-2-l.stach@pengutronix.de>
Hi Lucas,
Am Mittwoch, 6. September 2023, 20:42:11 CEST schrieb Lucas Stach:
> This adds the driver for the Samsung HDMI PHY found on the
> i.MX8MP SoC. Based on downstream implementation from
> Sandor Yu <Sandor.yu@nxp.com>.
>
> Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> (v2)
> Tested-by: Richard Leitner <richard.leitner@skidata.com> (v2)
> Co-developed-by: Marco Felsch <m.felsch@pengutronix.de>
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
On TQMa8MPxL + MBa8MPxL:
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> ---
> v3:
> - use GENMASK/FIELD_PREP
> - lowercase hex values
> - correct coding style
> v2:
> - use DEFINE_RUNTIME_DEV_PM_OPS
> ---
> drivers/phy/freescale/Kconfig | 6 +
> drivers/phy/freescale/Makefile | 1 +
> drivers/phy/freescale/phy-fsl-samsung-hdmi.c | 717 +++++++++++++++++++
> 3 files changed, 724 insertions(+)
> create mode 100644 drivers/phy/freescale/phy-fsl-samsung-hdmi.c
>
> diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
> index 853958fb2c06..5c2b73042dfc 100644
> --- a/drivers/phy/freescale/Kconfig
> +++ b/drivers/phy/freescale/Kconfig
> @@ -35,6 +35,12 @@ config PHY_FSL_IMX8M_PCIE
> Enable this to add support for the PCIE PHY as found on
> i.MX8M family of SOCs.
>
> +config PHY_FSL_SAMSUNG_HDMI_PHY
> + tristate "Samsung HDMI PHY support"
> + depends on OF && HAS_IOMEM
> + help
> + Enable this to add support for the Samsung HDMI PHY in i.MX8MP.
> +
> endif
>
> config PHY_FSL_LYNX_28G
> diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
> index cedb328bc4d2..c4386bfdb853 100644
> --- a/drivers/phy/freescale/Makefile
> +++ b/drivers/phy/freescale/Makefile
> @@ -4,3 +4,4 @@ obj-$(CONFIG_PHY_MIXEL_LVDS_PHY) +=
> phy-fsl-imx8qm-lvds-phy.o obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY) +=
> phy-fsl-imx8-mipi-dphy.o
> obj-$(CONFIG_PHY_FSL_IMX8M_PCIE) += phy-fsl-imx8m-pcie.o
> obj-$(CONFIG_PHY_FSL_LYNX_28G) += phy-fsl-lynx-28g.o
> +obj-$(CONFIG_PHY_FSL_SAMSUNG_HDMI_PHY) += phy-fsl-samsung-hdmi.o
> diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c new file mode 100644
> index 000000000000..ce712cfefd62
> --- /dev/null
> +++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> @@ -0,0 +1,717 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2020 NXP
> + * Copyright 2022 Pengutronix, Lucas Stach <kernel@pengutronix.de>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +
> +#define PHY_REG_00 0x00
> +#define PHY_REG_01 0x04
> +#define PHY_REG_02 0x08
> +#define PHY_REG_08 0x20
> +#define PHY_REG_09 0x24
> +#define PHY_REG_10 0x28
> +#define PHY_REG_11 0x2c
> +
> +#define PHY_REG_12 0x30
> +#define REG12_CK_DIV_MASK GENMASK(5, 4)
> +
> +#define PHY_REG_13 0x34
> +#define REG13_TG_CODE_LOW_MASK GENMASK(7, 0)
> +
> +#define PHY_REG_14 0x38
> +#define REG14_TOL_MASK GENMASK(7, 4)
> +#define REG14_RP_CODE_MASK GENMASK(2, 1)
> +#define REG14_TG_CODE_HIGH_MASK GENMASK(0, 0)
> +
> +#define PHY_REG_15 0x3c
> +#define PHY_REG_16 0x40
> +#define PHY_REG_17 0x44
> +#define PHY_REG_18 0x48
> +#define PHY_REG_19 0x4c
> +#define PHY_REG_20 0x50
> +
> +#define PHY_REG_21 0x54
> +#define REG21_SEL_TX_CK_INV BIT(7)
> +#define REG21_PMS_S_MASK GENMASK(3, 0)
> +
> +#define PHY_REG_22 0x58
> +#define PHY_REG_23 0x5c
> +#define PHY_REG_24 0x60
> +#define PHY_REG_25 0x64
> +#define PHY_REG_26 0x68
> +#define PHY_REG_27 0x6c
> +#define PHY_REG_28 0x70
> +#define PHY_REG_29 0x74
> +#define PHY_REG_30 0x78
> +#define PHY_REG_31 0x7c
> +#define PHY_REG_32 0x80
> +
> +#define PHY_REG_33 0x84
> +#define REG33_MODE_SET_DONE BIT(7)
> +#define REG33_FIX_DA BIT(1)
> +
> +#define PHY_REG_34 0x88
> +#define REG34_PHY_READY BIT(7)
> +#define REG34_PLL_LOCK BIT(6)
> +#define REG34_PHY_CLK_READY BIT(5)
> +
> +#define PHY_REG_35 0x8c
> +#define PHY_REG_36 0x90
> +#define PHY_REG_37 0x94
> +#define PHY_REG_38 0x98
> +#define PHY_REG_39 0x9c
> +#define PHY_REG_40 0xa0
> +#define PHY_REG_41 0xa4
> +#define PHY_REG_42 0xa8
> +#define PHY_REG_43 0xac
> +#define PHY_REG_44 0xb0
> +#define PHY_REG_45 0xb4
> +#define PHY_REG_46 0xb8
> +#define PHY_REG_47 0xbc
> +
> +#define PHY_PLL_DIV_REGS_NUM 6
> +
> +struct phy_config {
> + u32 pixclk;
> + u8 pll_div_regs[PHY_PLL_DIV_REGS_NUM];
> +};
> +
> +const struct phy_config phy_pll_cfg[] = {
> + {
> + .pixclk = 22250000,
> + .pll_div_regs = { 0x4b, 0xf1, 0x89, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 23750000,
> + .pll_div_regs = { 0x50, 0xf1, 0x86, 0x85, 0x80, 0x40 },
> + }, {
> + .pixclk = 24000000,
> + .pll_div_regs = { 0x50, 0xf0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 24024000,
> + .pll_div_regs = { 0x50, 0xf1, 0x99, 0x02, 0x80, 0x40 },
> + }, {
> + .pixclk = 25175000,
> + .pll_div_regs = { 0x54, 0xfc, 0xcc, 0x91, 0x80, 0x40 },
> + }, {
> + .pixclk = 25200000,
> + .pll_div_regs = { 0x54, 0xf0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 26750000,
> + .pll_div_regs = { 0x5a, 0xf2, 0x89, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 27000000,
> + .pll_div_regs = { 0x5a, 0xf0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 27027000,
> + .pll_div_regs = { 0x5a, 0xf2, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 29500000,
> + .pll_div_regs = { 0x62, 0xf4, 0x95, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 30750000,
> + .pll_div_regs = { 0x66, 0xf4, 0x82, 0x01, 0x88, 0x45 },
> + }, {
> + .pixclk = 30888000,
> + .pll_div_regs = { 0x66, 0xf4, 0x99, 0x18, 0x88, 0x45 },
> + }, {
> + .pixclk = 33750000,
> + .pll_div_regs = { 0x70, 0xf4, 0x82, 0x01, 0x80, 0x40 },
> + }, {
> + .pixclk = 35000000,
> + .pll_div_regs = { 0x58, 0xb8, 0x8b, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 36000000,
> + .pll_div_regs = { 0x5a, 0xb0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 36036000,
> + .pll_div_regs = { 0x5a, 0xb2, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 40000000,
> + .pll_div_regs = { 0x64, 0xb0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 43200000,
> + .pll_div_regs = { 0x5a, 0x90, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 43243200,
> + .pll_div_regs = { 0x5a, 0x92, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 44500000,
> + .pll_div_regs = { 0x5c, 0x92, 0x98, 0x11, 0x84, 0x41 },
> + }, {
> + .pixclk = 47000000,
> + .pll_div_regs = { 0x62, 0x94, 0x95, 0x82, 0x80, 0x40 },
> + }, {
> + .pixclk = 47500000,
> + .pll_div_regs = { 0x63, 0x96, 0xa1, 0x82, 0x80, 0x40 },
> + }, {
> + .pixclk = 50349650,
> + .pll_div_regs = { 0x54, 0x7c, 0xc3, 0x8f, 0x80, 0x40 },
> + }, {
> + .pixclk = 50400000,
> + .pll_div_regs = { 0x54, 0x70, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 53250000,
> + .pll_div_regs = { 0x58, 0x72, 0x84, 0x03, 0x82, 0x41 },
> + }, {
> + .pixclk = 53500000,
> + .pll_div_regs = { 0x5a, 0x72, 0x89, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 54000000,
> + .pll_div_regs = { 0x5a, 0x70, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 54054000,
> + .pll_div_regs = { 0x5a, 0x72, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 59000000,
> + .pll_div_regs = { 0x62, 0x74, 0x95, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 59340659,
> + .pll_div_regs = { 0x62, 0x74, 0xdb, 0x52, 0x88, 0x47 },
> + }, {
> + .pixclk = 59400000,
> + .pll_div_regs = { 0x63, 0x70, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 61500000,
> + .pll_div_regs = { 0x66, 0x74, 0x82, 0x01, 0x88, 0x45 },
> + }, {
> + .pixclk = 63500000,
> + .pll_div_regs = { 0x69, 0x74, 0x89, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 67500000,
> + .pll_div_regs = { 0x54, 0x52, 0x87, 0x03, 0x80, 0x40 },
> + }, {
> + .pixclk = 70000000,
> + .pll_div_regs = { 0x58, 0x58, 0x8b, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 72000000,
> + .pll_div_regs = { 0x5a, 0x50, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 72072000,
> + .pll_div_regs = { 0x5a, 0x52, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 74176000,
> + .pll_div_regs = { 0x5d, 0x58, 0xdb, 0xA2, 0x88, 0x41 },
> + }, {
> + .pixclk = 74250000,
> + .pll_div_regs = { 0x5c, 0x52, 0x90, 0x0d, 0x84, 0x41 },
> + }, {
> + .pixclk = 78500000,
> + .pll_div_regs = { 0x62, 0x54, 0x87, 0x01, 0x80, 0x40 },
> + }, {
> + .pixclk = 80000000,
> + .pll_div_regs = { 0x64, 0x50, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 82000000,
> + .pll_div_regs = { 0x66, 0x54, 0x82, 0x01, 0x88, 0x45 },
> + }, {
> + .pixclk = 82500000,
> + .pll_div_regs = { 0x67, 0x54, 0x88, 0x01, 0x90, 0x49 },
> + }, {
> + .pixclk = 89000000,
> + .pll_div_regs = { 0x70, 0x54, 0x84, 0x83, 0x80, 0x40 },
> + }, {
> + .pixclk = 90000000,
> + .pll_div_regs = { 0x70, 0x54, 0x82, 0x01, 0x80, 0x40 },
> + }, {
> + .pixclk = 94000000,
> + .pll_div_regs = { 0x4e, 0x32, 0xa7, 0x10, 0x80, 0x40 },
> + }, {
> + .pixclk = 95000000,
> + .pll_div_regs = { 0x50, 0x31, 0x86, 0x85, 0x80, 0x40 },
> + }, {
> + .pixclk = 98901099,
> + .pll_div_regs = { 0x52, 0x3a, 0xdb, 0x4c, 0x88, 0x47 },
> + }, {
> + .pixclk = 99000000,
> + .pll_div_regs = { 0x52, 0x32, 0x82, 0x01, 0x88, 0x47 },
> + }, {
> + .pixclk = 100699300,
> + .pll_div_regs = { 0x54, 0x3c, 0xc3, 0x8f, 0x80, 0x40 },
> + }, {
> + .pixclk = 100800000,
> + .pll_div_regs = { 0x54, 0x30, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 102500000,
> + .pll_div_regs = { 0x55, 0x32, 0x8c, 0x05, 0x90, 0x4b },
> + }, {
> + .pixclk = 104750000,
> + .pll_div_regs = { 0x57, 0x32, 0x98, 0x07, 0x90, 0x49 },
> + }, {
> + .pixclk = 106500000,
> + .pll_div_regs = { 0x58, 0x32, 0x84, 0x03, 0x82, 0x41 },
> + }, {
> + .pixclk = 107000000,
> + .pll_div_regs = { 0x5a, 0x32, 0x89, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 108000000,
> + .pll_div_regs = { 0x5a, 0x30, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 108108000,
> + .pll_div_regs = { 0x5a, 0x32, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 118000000,
> + .pll_div_regs = { 0x62, 0x34, 0x95, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 118800000,
> + .pll_div_regs = { 0x63, 0x30, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 123000000,
> + .pll_div_regs = { 0x66, 0x34, 0x82, 0x01, 0x88, 0x45 },
> + }, {
> + .pixclk = 127000000,
> + .pll_div_regs = { 0x69, 0x34, 0x89, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 135000000,
> + .pll_div_regs = { 0x70, 0x34, 0x82, 0x01, 0x80, 0x40 },
> + }, {
> + .pixclk = 135580000,
> + .pll_div_regs = { 0x71, 0x39, 0xe9, 0x82, 0x9c, 0x5b },
> + }, {
> + .pixclk = 137520000,
> + .pll_div_regs = { 0x72, 0x38, 0x99, 0x10, 0x85, 0x41 },
> + }, {
> + .pixclk = 138750000,
> + .pll_div_regs = { 0x73, 0x35, 0x88, 0x05, 0x90, 0x4d },
> + }, {
> + .pixclk = 140000000,
> + .pll_div_regs = { 0x75, 0x36, 0xa7, 0x90, 0x80, 0x40 },
> + }, {
> + .pixclk = 144000000,
> + .pll_div_regs = { 0x78, 0x30, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 148352000,
> + .pll_div_regs = { 0x7b, 0x35, 0xdb, 0x39, 0x90, 0x45 },
> + }, {
> + .pixclk = 148500000,
> + .pll_div_regs = { 0x7b, 0x35, 0x84, 0x03, 0x90, 0x45 },
> + }, {
> + .pixclk = 154000000,
> + .pll_div_regs = { 0x40, 0x18, 0x83, 0x01, 0x00, 0x40 },
> + }, {
> + .pixclk = 157000000,
> + .pll_div_regs = { 0x41, 0x11, 0xa7, 0x14, 0x80, 0x40 },
> + }, {
> + .pixclk = 160000000,
> + .pll_div_regs = { 0x42, 0x12, 0xa1, 0x20, 0x80, 0x40 },
> + }, {
> + .pixclk = 162000000,
> + .pll_div_regs = { 0x43, 0x18, 0x8b, 0x08, 0x96, 0x55 },
> + }, {
> + .pixclk = 164000000,
> + .pll_div_regs = { 0x45, 0x11, 0x83, 0x82, 0x90, 0x4b },
> + }, {
> + .pixclk = 165000000,
> + .pll_div_regs = { 0x45, 0x11, 0x84, 0x81, 0x90, 0x4b },
> + }, {
> + .pixclk = 180000000,
> + .pll_div_regs = { 0x4b, 0x10, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 185625000,
> + .pll_div_regs = { 0x4e, 0x12, 0x9a, 0x95, 0x80, 0x40 },
> + }, {
> + .pixclk = 188000000,
> + .pll_div_regs = { 0x4e, 0x12, 0xa7, 0x10, 0x80, 0x40 },
> + }, {
> + .pixclk = 198000000,
> + .pll_div_regs = { 0x52, 0x12, 0x82, 0x01, 0x88, 0x47 },
> + }, {
> + .pixclk = 205000000,
> + .pll_div_regs = { 0x55, 0x12, 0x8c, 0x05, 0x90, 0x4b },
> + }, {
> + .pixclk = 209500000,
> + .pll_div_regs = { 0x57, 0x12, 0x98, 0x07, 0x90, 0x49 },
> + }, {
> + .pixclk = 213000000,
> + .pll_div_regs = { 0x58, 0x12, 0x84, 0x03, 0x82, 0x41 },
> + }, {
> + .pixclk = 216000000,
> + .pll_div_regs = { 0x5a, 0x10, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 216216000,
> + .pll_div_regs = { 0x5a, 0x12, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 237600000,
> + .pll_div_regs = { 0x63, 0x10, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 254000000,
> + .pll_div_regs = { 0x69, 0x14, 0x89, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 277500000,
> + .pll_div_regs = { 0x73, 0x15, 0x88, 0x05, 0x90, 0x4d },
> + }, {
> + .pixclk = 288000000,
> + .pll_div_regs = { 0x78, 0x10, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 297000000,
> + .pll_div_regs = { 0x7b, 0x15, 0x84, 0x03, 0x90, 0x45 },
> + },
> +};
> +
> +struct reg_settings {
> + u8 reg;
> + u8 val;
> +};
> +
> +const struct reg_settings common_phy_cfg[] = {
> + { PHY_REG_00, 0x00 }, { PHY_REG_01, 0xd1 },
> + { PHY_REG_08, 0x4f }, { PHY_REG_09, 0x30 },
> + { PHY_REG_10, 0x33 }, { PHY_REG_11, 0x65 },
> + /* REG12 pixclk specific */
> + /* REG13 pixclk specific */
> + /* REG14 pixclk specific */
> + { PHY_REG_15, 0x80 }, { PHY_REG_16, 0x6c },
> + { PHY_REG_17, 0xf2 }, { PHY_REG_18, 0x67 },
> + { PHY_REG_19, 0x00 }, { PHY_REG_20, 0x10 },
> + /* REG21 pixclk specific */
> + { PHY_REG_22, 0x30 }, { PHY_REG_23, 0x32 },
> + { PHY_REG_24, 0x60 }, { PHY_REG_25, 0x8f },
> + { PHY_REG_26, 0x00 }, { PHY_REG_27, 0x00 },
> + { PHY_REG_28, 0x08 }, { PHY_REG_29, 0x00 },
> + { PHY_REG_30, 0x00 }, { PHY_REG_31, 0x00 },
> + { PHY_REG_32, 0x00 }, { PHY_REG_33, 0x80 },
> + { PHY_REG_34, 0x00 }, { PHY_REG_35, 0x00 },
> + { PHY_REG_36, 0x00 }, { PHY_REG_37, 0x00 },
> + { PHY_REG_38, 0x00 }, { PHY_REG_39, 0x00 },
> + { PHY_REG_40, 0x00 }, { PHY_REG_41, 0xe0 },
> + { PHY_REG_42, 0x83 }, { PHY_REG_43, 0x0f },
> + { PHY_REG_44, 0x3E }, { PHY_REG_45, 0xf8 },
> + { PHY_REG_46, 0x00 }, { PHY_REG_47, 0x00 }
> +};
> +
> +struct fsl_samsung_hdmi_phy {
> + struct device *dev;
> + void __iomem *regs;
> + struct clk *apbclk;
> + struct clk *refclk;
> +
> + /* clk provider */
> + struct clk_hw hw;
> + const struct phy_config *cur_cfg;
> +};
> +
> +static inline struct fsl_samsung_hdmi_phy *
> +to_fsl_samsung_hdmi_phy(struct clk_hw *hw)
> +{
> + return container_of(hw, struct fsl_samsung_hdmi_phy, hw);
> +}
> +
> +static void
> +fsl_samsung_hdmi_phy_configure_pixclk(struct fsl_samsung_hdmi_phy *phy,
> + const struct phy_config *cfg)
> +{
> + u8 div;
> +
> + switch (cfg->pixclk) {
> + case 22250000 ... 33750000:
> + div = 0xf;
> + break;
> + case 35000000 ... 40000000:
> + div = 0xb;
> + break;
> + case 43200000 ... 47500000:
> + div = 0x9;
> + break;
> + case 50349650 ... 63500000:
> + div = 0x7;
> + break;
> + case 67500000 ... 90000000:
> + div = 0x5;
> + break;
> + case 94000000 ... 148500000:
> + div = 0x3;
> + break;
> + case 154000000 ... 297000000:
> + div = 0x1;
> + break;
> + }
> +
> + writeb(REG21_SEL_TX_CK_INV | FIELD_PREP(REG21_PMS_S_MASK, div),
> + phy->regs + PHY_REG_21);
> +}
> +
> +static void
> +fsl_samsung_hdmi_phy_configure_pll_lock_det(struct fsl_samsung_hdmi_phy
> *phy, + const struct phy_config
*cfg)
> +{
> + u32 pclk = cfg->pixclk;
> + u32 fld_tg_code;
> + u32 pclk_khz;
> + u8 div;
> +
> + switch (cfg->pixclk) {
> + case 22250000 ... 47500000:
> + div = 1;
> + break;
> + case 50349650 ... 99000000:
> + div = 2;
> + break;
> + case 100699300 ... 198000000:
> + div = 4;
> + break;
> + case 205000000 ... 297000000:
> + div = 8;
> + break;
> + }
> +
> + writeb(FIELD_PREP(REG12_CK_DIV_MASK, ilog2(div)), phy->regs +
PHY_REG_12);
> +
> + /*
> + * Calculation for the frequency lock detector target code
(fld_tg_code)
> + * is based on reference manual register description of PHY_REG13
> + * (13.10.3.1.14.2):
> + * 1st) Calculate int_pllclk which is determinded by FLD_CK_DIV
> + * 2nd) Increase resolution to avoid rounding issues
> + * 3th) Do the div (256 / Freq. of int_pllclk) * 24
> + * 4th) Reduce the resolution and always round up since the NXP
> + * settings rounding up always too. TODO: Check if that is
> + * correct.
> + */
> + pclk /= div;
> + pclk_khz = pclk / 1000;
> + fld_tg_code = 256 * 1000 * 1000 / pclk_khz * 24;
> + fld_tg_code = DIV_ROUND_UP(fld_tg_code, 1000);
> +
> + /* FLD_TOL and FLD_RP_CODE taken from downstream driver */
> + writeb(FIELD_PREP(REG13_TG_CODE_LOW_MASK, fld_tg_code),
> + phy->regs + PHY_REG_13);
> + writeb(FIELD_PREP(REG14_TOL_MASK, 2) |
> + FIELD_PREP(REG14_RP_CODE_MASK, 2) |
> + FIELD_PREP(REG14_TG_CODE_HIGH_MASK, fld_tg_code >> 8),
> + phy->regs + PHY_REG_14);
> +}
> +
> +static int fsl_samsung_hdmi_phy_configure(struct fsl_samsung_hdmi_phy *phy,
> + const struct phy_config
*cfg)
> +{
> + int i, ret;
> + u8 val;
> +
> + /* HDMI PHY init */
> + writeb(REG33_FIX_DA, phy->regs + PHY_REG_33);
> +
> + /* common PHY registers */
> + for (i = 0; i < ARRAY_SIZE(common_phy_cfg); i++)
> + writeb(common_phy_cfg[i].val, phy->regs +
common_phy_cfg[i].reg);
> +
> + /* set individual PLL registers PHY_REG2 ... PHY_REG7 */
> + for (i = 0; i < PHY_PLL_DIV_REGS_NUM; i++)
> + writeb(cfg->pll_div_regs[i], phy->regs + PHY_REG_02 + i *
4);
> +
> + fsl_samsung_hdmi_phy_configure_pixclk(phy, cfg);
> + fsl_samsung_hdmi_phy_configure_pll_lock_det(phy, cfg);
> +
> + writeb(REG33_FIX_DA | REG33_MODE_SET_DONE, phy->regs + PHY_REG_33);
> +
> + ret = readb_poll_timeout(phy->regs + PHY_REG_34, val,
> + val & REG34_PLL_LOCK, 50, 20000);
> + if (ret)
> + dev_err(phy->dev, "PLL failed to lock\n");
> +
> + return ret;
> +}
> +
> +static unsigned long phy_clk_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
> +
> + if (!phy->cur_cfg)
> + return 74250000;
> +
> + return phy->cur_cfg->pixclk;
> +}
> +
> +static long phy_clk_round_rate(struct clk_hw *hw,
> + unsigned long rate, unsigned long
*parent_rate)
> +{
> + int i;
> +
> + for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
> + if (phy_pll_cfg[i].pixclk <= rate)
> + return phy_pll_cfg[i].pixclk;
> +
> + return -EINVAL;
> +}
> +
> +static int phy_clk_set_rate(struct clk_hw *hw,
> + unsigned long rate, unsigned long
parent_rate)
> +{
> + struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
> + int i;
> +
> + for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
> + if (phy_pll_cfg[i].pixclk <= rate)
> + break;
> +
> + if (i < 0)
> + return -EINVAL;
> +
> + phy->cur_cfg = &phy_pll_cfg[i];
> +
> + return fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
> +}
> +
> +static const struct clk_ops phy_clk_ops = {
> + .recalc_rate = phy_clk_recalc_rate,
> + .round_rate = phy_clk_round_rate,
> + .set_rate = phy_clk_set_rate,
> +};
> +
> +static int phy_clk_register(struct fsl_samsung_hdmi_phy *phy)
> +{
> + struct device *dev = phy->dev;
> + struct device_node *np = dev->of_node;
> + struct clk_init_data init;
> + const char *parent_name;
> + struct clk *phyclk;
> + int ret;
> +
> + parent_name = __clk_get_name(phy->refclk);
> +
> + init.parent_names = &parent_name;
> + init.num_parents = 1;
> + init.flags = 0;
> + init.name = "hdmi_pclk";
> + init.ops = &phy_clk_ops;
> +
> + phy->hw.init = &init;
> +
> + phyclk = devm_clk_register(dev, &phy->hw);
> + if (IS_ERR(phyclk))
> + return dev_err_probe(dev, PTR_ERR(phyclk),
> + "failed to register clock\n");
> +
> + ret = of_clk_add_provider(np, of_clk_src_simple_get, phyclk);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "failed to register clock
provider\n");
> +
> + return 0;
> +}
> +
> +static int fsl_samsung_hdmi_phy_probe(struct platform_device *pdev)
> +{
> + struct fsl_samsung_hdmi_phy *phy;
> + int ret;
> +
> + phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
> + if (!phy)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, phy);
> + phy->dev = &pdev->dev;
> +
> + phy->regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(phy->regs))
> + return PTR_ERR(phy->regs);
> +
> + phy->apbclk = devm_clk_get(phy->dev, "apb");
> + if (IS_ERR(phy->apbclk))
> + return dev_err_probe(phy->dev, PTR_ERR(phy->apbclk),
> + "failed to get apb clk\n");
> +
> + phy->refclk = devm_clk_get(phy->dev, "ref");
> + if (IS_ERR(phy->refclk))
> + return dev_err_probe(phy->dev, PTR_ERR(phy->refclk),
> + "failed to get ref clk\n");
> +
> + ret = clk_prepare_enable(phy->apbclk);
> + if (ret) {
> + dev_err(phy->dev, "failed to enable apbclk\n");
> + return ret;
> + }
> +
> + pm_runtime_get_noresume(phy->dev);
> + pm_runtime_set_active(phy->dev);
> + pm_runtime_enable(phy->dev);
> +
> + ret = phy_clk_register(phy);
> + if (ret) {
> + dev_err(&pdev->dev, "register clk failed\n");
> + goto register_clk_failed;
> + }
> +
> + pm_runtime_put(phy->dev);
> +
> + return 0;
> +
> +register_clk_failed:
> + clk_disable_unprepare(phy->apbclk);
> +
> + return ret;
> +}
> +
> +static int fsl_samsung_hdmi_phy_remove(struct platform_device *pdev)
> +{
> + of_clk_del_provider(pdev->dev.of_node);
> +
> + return 0;
> +}
> +
> +static int fsl_samsung_hdmi_phy_suspend(struct device *dev)
> +{
> + struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
> +
> + clk_disable_unprepare(phy->apbclk);
> +
> + return 0;
> +}
> +
> +static int fsl_samsung_hdmi_phy_resume(struct device *dev)
> +{
> + struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
> + int ret = 0;
> +
> + ret = clk_prepare_enable(phy->apbclk);
> + if (ret) {
> + dev_err(phy->dev, "failed to enable apbclk\n");
> + return ret;
> + }
> +
> + if (phy->cur_cfg)
> + ret = fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
> +
> + return ret;
> +
> +}
> +
> +static DEFINE_RUNTIME_DEV_PM_OPS(fsl_samsung_hdmi_phy_pm_ops,
> + fsl_samsung_hdmi_phy_suspend,
> + fsl_samsung_hdmi_phy_resume, NULL);
> +
> +static const struct of_device_id fsl_samsung_hdmi_phy_of_match[] = {
> + {
> + .compatible = "fsl,imx8mp-hdmi-phy",
> + }, {
> + /* sentinel */
> + }
> +};
> +MODULE_DEVICE_TABLE(of, fsl_samsung_hdmi_phy_of_match);
> +
> +static struct platform_driver fsl_samsung_hdmi_phy_driver = {
> + .probe = fsl_samsung_hdmi_phy_probe,
> + .remove = fsl_samsung_hdmi_phy_remove,
> + .driver = {
> + .name = "fsl-samsung-hdmi-phy",
> + .of_match_table = fsl_samsung_hdmi_phy_of_match,
> + .pm = pm_ptr(&fsl_samsung_hdmi_phy_pm_ops),
> + },
> +};
> +module_platform_driver(fsl_samsung_hdmi_phy_driver);
> +
> +MODULE_AUTHOR("Sandor Yu <Sandor.yu@nxp.com>");
> +MODULE_DESCRIPTION("SAMSUNG HDMI 2.0 Transmitter PHY Driver");
> +MODULE_LICENSE("GPL");
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Lucas Stach <l.stach@pengutronix.de>
Cc: Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
linux-arm-kernel@lists.infradead.org,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
patchwork-lst@pengutronix.de,
Luca Ceresoli <luca.ceresoli@bootlin.com>,
Richard Leitner <richard.leitner@skidata.com>
Subject: Re: [PATCH v3 2/2] phy: freescale: add Samsung HDMI PHY
Date: Thu, 07 Sep 2023 08:39:42 +0200 [thread overview]
Message-ID: <4830698.GXAFRqVoOG@steina-w> (raw)
In-Reply-To: <20230906184211.1857585-2-l.stach@pengutronix.de>
Hi Lucas,
Am Mittwoch, 6. September 2023, 20:42:11 CEST schrieb Lucas Stach:
> This adds the driver for the Samsung HDMI PHY found on the
> i.MX8MP SoC. Based on downstream implementation from
> Sandor Yu <Sandor.yu@nxp.com>.
>
> Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> (v2)
> Tested-by: Richard Leitner <richard.leitner@skidata.com> (v2)
> Co-developed-by: Marco Felsch <m.felsch@pengutronix.de>
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
On TQMa8MPxL + MBa8MPxL:
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> ---
> v3:
> - use GENMASK/FIELD_PREP
> - lowercase hex values
> - correct coding style
> v2:
> - use DEFINE_RUNTIME_DEV_PM_OPS
> ---
> drivers/phy/freescale/Kconfig | 6 +
> drivers/phy/freescale/Makefile | 1 +
> drivers/phy/freescale/phy-fsl-samsung-hdmi.c | 717 +++++++++++++++++++
> 3 files changed, 724 insertions(+)
> create mode 100644 drivers/phy/freescale/phy-fsl-samsung-hdmi.c
>
> diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
> index 853958fb2c06..5c2b73042dfc 100644
> --- a/drivers/phy/freescale/Kconfig
> +++ b/drivers/phy/freescale/Kconfig
> @@ -35,6 +35,12 @@ config PHY_FSL_IMX8M_PCIE
> Enable this to add support for the PCIE PHY as found on
> i.MX8M family of SOCs.
>
> +config PHY_FSL_SAMSUNG_HDMI_PHY
> + tristate "Samsung HDMI PHY support"
> + depends on OF && HAS_IOMEM
> + help
> + Enable this to add support for the Samsung HDMI PHY in i.MX8MP.
> +
> endif
>
> config PHY_FSL_LYNX_28G
> diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
> index cedb328bc4d2..c4386bfdb853 100644
> --- a/drivers/phy/freescale/Makefile
> +++ b/drivers/phy/freescale/Makefile
> @@ -4,3 +4,4 @@ obj-$(CONFIG_PHY_MIXEL_LVDS_PHY) +=
> phy-fsl-imx8qm-lvds-phy.o obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY) +=
> phy-fsl-imx8-mipi-dphy.o
> obj-$(CONFIG_PHY_FSL_IMX8M_PCIE) += phy-fsl-imx8m-pcie.o
> obj-$(CONFIG_PHY_FSL_LYNX_28G) += phy-fsl-lynx-28g.o
> +obj-$(CONFIG_PHY_FSL_SAMSUNG_HDMI_PHY) += phy-fsl-samsung-hdmi.o
> diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c new file mode 100644
> index 000000000000..ce712cfefd62
> --- /dev/null
> +++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> @@ -0,0 +1,717 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2020 NXP
> + * Copyright 2022 Pengutronix, Lucas Stach <kernel@pengutronix.de>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +
> +#define PHY_REG_00 0x00
> +#define PHY_REG_01 0x04
> +#define PHY_REG_02 0x08
> +#define PHY_REG_08 0x20
> +#define PHY_REG_09 0x24
> +#define PHY_REG_10 0x28
> +#define PHY_REG_11 0x2c
> +
> +#define PHY_REG_12 0x30
> +#define REG12_CK_DIV_MASK GENMASK(5, 4)
> +
> +#define PHY_REG_13 0x34
> +#define REG13_TG_CODE_LOW_MASK GENMASK(7, 0)
> +
> +#define PHY_REG_14 0x38
> +#define REG14_TOL_MASK GENMASK(7, 4)
> +#define REG14_RP_CODE_MASK GENMASK(2, 1)
> +#define REG14_TG_CODE_HIGH_MASK GENMASK(0, 0)
> +
> +#define PHY_REG_15 0x3c
> +#define PHY_REG_16 0x40
> +#define PHY_REG_17 0x44
> +#define PHY_REG_18 0x48
> +#define PHY_REG_19 0x4c
> +#define PHY_REG_20 0x50
> +
> +#define PHY_REG_21 0x54
> +#define REG21_SEL_TX_CK_INV BIT(7)
> +#define REG21_PMS_S_MASK GENMASK(3, 0)
> +
> +#define PHY_REG_22 0x58
> +#define PHY_REG_23 0x5c
> +#define PHY_REG_24 0x60
> +#define PHY_REG_25 0x64
> +#define PHY_REG_26 0x68
> +#define PHY_REG_27 0x6c
> +#define PHY_REG_28 0x70
> +#define PHY_REG_29 0x74
> +#define PHY_REG_30 0x78
> +#define PHY_REG_31 0x7c
> +#define PHY_REG_32 0x80
> +
> +#define PHY_REG_33 0x84
> +#define REG33_MODE_SET_DONE BIT(7)
> +#define REG33_FIX_DA BIT(1)
> +
> +#define PHY_REG_34 0x88
> +#define REG34_PHY_READY BIT(7)
> +#define REG34_PLL_LOCK BIT(6)
> +#define REG34_PHY_CLK_READY BIT(5)
> +
> +#define PHY_REG_35 0x8c
> +#define PHY_REG_36 0x90
> +#define PHY_REG_37 0x94
> +#define PHY_REG_38 0x98
> +#define PHY_REG_39 0x9c
> +#define PHY_REG_40 0xa0
> +#define PHY_REG_41 0xa4
> +#define PHY_REG_42 0xa8
> +#define PHY_REG_43 0xac
> +#define PHY_REG_44 0xb0
> +#define PHY_REG_45 0xb4
> +#define PHY_REG_46 0xb8
> +#define PHY_REG_47 0xbc
> +
> +#define PHY_PLL_DIV_REGS_NUM 6
> +
> +struct phy_config {
> + u32 pixclk;
> + u8 pll_div_regs[PHY_PLL_DIV_REGS_NUM];
> +};
> +
> +const struct phy_config phy_pll_cfg[] = {
> + {
> + .pixclk = 22250000,
> + .pll_div_regs = { 0x4b, 0xf1, 0x89, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 23750000,
> + .pll_div_regs = { 0x50, 0xf1, 0x86, 0x85, 0x80, 0x40 },
> + }, {
> + .pixclk = 24000000,
> + .pll_div_regs = { 0x50, 0xf0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 24024000,
> + .pll_div_regs = { 0x50, 0xf1, 0x99, 0x02, 0x80, 0x40 },
> + }, {
> + .pixclk = 25175000,
> + .pll_div_regs = { 0x54, 0xfc, 0xcc, 0x91, 0x80, 0x40 },
> + }, {
> + .pixclk = 25200000,
> + .pll_div_regs = { 0x54, 0xf0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 26750000,
> + .pll_div_regs = { 0x5a, 0xf2, 0x89, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 27000000,
> + .pll_div_regs = { 0x5a, 0xf0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 27027000,
> + .pll_div_regs = { 0x5a, 0xf2, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 29500000,
> + .pll_div_regs = { 0x62, 0xf4, 0x95, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 30750000,
> + .pll_div_regs = { 0x66, 0xf4, 0x82, 0x01, 0x88, 0x45 },
> + }, {
> + .pixclk = 30888000,
> + .pll_div_regs = { 0x66, 0xf4, 0x99, 0x18, 0x88, 0x45 },
> + }, {
> + .pixclk = 33750000,
> + .pll_div_regs = { 0x70, 0xf4, 0x82, 0x01, 0x80, 0x40 },
> + }, {
> + .pixclk = 35000000,
> + .pll_div_regs = { 0x58, 0xb8, 0x8b, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 36000000,
> + .pll_div_regs = { 0x5a, 0xb0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 36036000,
> + .pll_div_regs = { 0x5a, 0xb2, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 40000000,
> + .pll_div_regs = { 0x64, 0xb0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 43200000,
> + .pll_div_regs = { 0x5a, 0x90, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 43243200,
> + .pll_div_regs = { 0x5a, 0x92, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 44500000,
> + .pll_div_regs = { 0x5c, 0x92, 0x98, 0x11, 0x84, 0x41 },
> + }, {
> + .pixclk = 47000000,
> + .pll_div_regs = { 0x62, 0x94, 0x95, 0x82, 0x80, 0x40 },
> + }, {
> + .pixclk = 47500000,
> + .pll_div_regs = { 0x63, 0x96, 0xa1, 0x82, 0x80, 0x40 },
> + }, {
> + .pixclk = 50349650,
> + .pll_div_regs = { 0x54, 0x7c, 0xc3, 0x8f, 0x80, 0x40 },
> + }, {
> + .pixclk = 50400000,
> + .pll_div_regs = { 0x54, 0x70, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 53250000,
> + .pll_div_regs = { 0x58, 0x72, 0x84, 0x03, 0x82, 0x41 },
> + }, {
> + .pixclk = 53500000,
> + .pll_div_regs = { 0x5a, 0x72, 0x89, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 54000000,
> + .pll_div_regs = { 0x5a, 0x70, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 54054000,
> + .pll_div_regs = { 0x5a, 0x72, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 59000000,
> + .pll_div_regs = { 0x62, 0x74, 0x95, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 59340659,
> + .pll_div_regs = { 0x62, 0x74, 0xdb, 0x52, 0x88, 0x47 },
> + }, {
> + .pixclk = 59400000,
> + .pll_div_regs = { 0x63, 0x70, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 61500000,
> + .pll_div_regs = { 0x66, 0x74, 0x82, 0x01, 0x88, 0x45 },
> + }, {
> + .pixclk = 63500000,
> + .pll_div_regs = { 0x69, 0x74, 0x89, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 67500000,
> + .pll_div_regs = { 0x54, 0x52, 0x87, 0x03, 0x80, 0x40 },
> + }, {
> + .pixclk = 70000000,
> + .pll_div_regs = { 0x58, 0x58, 0x8b, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 72000000,
> + .pll_div_regs = { 0x5a, 0x50, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 72072000,
> + .pll_div_regs = { 0x5a, 0x52, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 74176000,
> + .pll_div_regs = { 0x5d, 0x58, 0xdb, 0xA2, 0x88, 0x41 },
> + }, {
> + .pixclk = 74250000,
> + .pll_div_regs = { 0x5c, 0x52, 0x90, 0x0d, 0x84, 0x41 },
> + }, {
> + .pixclk = 78500000,
> + .pll_div_regs = { 0x62, 0x54, 0x87, 0x01, 0x80, 0x40 },
> + }, {
> + .pixclk = 80000000,
> + .pll_div_regs = { 0x64, 0x50, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 82000000,
> + .pll_div_regs = { 0x66, 0x54, 0x82, 0x01, 0x88, 0x45 },
> + }, {
> + .pixclk = 82500000,
> + .pll_div_regs = { 0x67, 0x54, 0x88, 0x01, 0x90, 0x49 },
> + }, {
> + .pixclk = 89000000,
> + .pll_div_regs = { 0x70, 0x54, 0x84, 0x83, 0x80, 0x40 },
> + }, {
> + .pixclk = 90000000,
> + .pll_div_regs = { 0x70, 0x54, 0x82, 0x01, 0x80, 0x40 },
> + }, {
> + .pixclk = 94000000,
> + .pll_div_regs = { 0x4e, 0x32, 0xa7, 0x10, 0x80, 0x40 },
> + }, {
> + .pixclk = 95000000,
> + .pll_div_regs = { 0x50, 0x31, 0x86, 0x85, 0x80, 0x40 },
> + }, {
> + .pixclk = 98901099,
> + .pll_div_regs = { 0x52, 0x3a, 0xdb, 0x4c, 0x88, 0x47 },
> + }, {
> + .pixclk = 99000000,
> + .pll_div_regs = { 0x52, 0x32, 0x82, 0x01, 0x88, 0x47 },
> + }, {
> + .pixclk = 100699300,
> + .pll_div_regs = { 0x54, 0x3c, 0xc3, 0x8f, 0x80, 0x40 },
> + }, {
> + .pixclk = 100800000,
> + .pll_div_regs = { 0x54, 0x30, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 102500000,
> + .pll_div_regs = { 0x55, 0x32, 0x8c, 0x05, 0x90, 0x4b },
> + }, {
> + .pixclk = 104750000,
> + .pll_div_regs = { 0x57, 0x32, 0x98, 0x07, 0x90, 0x49 },
> + }, {
> + .pixclk = 106500000,
> + .pll_div_regs = { 0x58, 0x32, 0x84, 0x03, 0x82, 0x41 },
> + }, {
> + .pixclk = 107000000,
> + .pll_div_regs = { 0x5a, 0x32, 0x89, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 108000000,
> + .pll_div_regs = { 0x5a, 0x30, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 108108000,
> + .pll_div_regs = { 0x5a, 0x32, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 118000000,
> + .pll_div_regs = { 0x62, 0x34, 0x95, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 118800000,
> + .pll_div_regs = { 0x63, 0x30, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 123000000,
> + .pll_div_regs = { 0x66, 0x34, 0x82, 0x01, 0x88, 0x45 },
> + }, {
> + .pixclk = 127000000,
> + .pll_div_regs = { 0x69, 0x34, 0x89, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 135000000,
> + .pll_div_regs = { 0x70, 0x34, 0x82, 0x01, 0x80, 0x40 },
> + }, {
> + .pixclk = 135580000,
> + .pll_div_regs = { 0x71, 0x39, 0xe9, 0x82, 0x9c, 0x5b },
> + }, {
> + .pixclk = 137520000,
> + .pll_div_regs = { 0x72, 0x38, 0x99, 0x10, 0x85, 0x41 },
> + }, {
> + .pixclk = 138750000,
> + .pll_div_regs = { 0x73, 0x35, 0x88, 0x05, 0x90, 0x4d },
> + }, {
> + .pixclk = 140000000,
> + .pll_div_regs = { 0x75, 0x36, 0xa7, 0x90, 0x80, 0x40 },
> + }, {
> + .pixclk = 144000000,
> + .pll_div_regs = { 0x78, 0x30, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 148352000,
> + .pll_div_regs = { 0x7b, 0x35, 0xdb, 0x39, 0x90, 0x45 },
> + }, {
> + .pixclk = 148500000,
> + .pll_div_regs = { 0x7b, 0x35, 0x84, 0x03, 0x90, 0x45 },
> + }, {
> + .pixclk = 154000000,
> + .pll_div_regs = { 0x40, 0x18, 0x83, 0x01, 0x00, 0x40 },
> + }, {
> + .pixclk = 157000000,
> + .pll_div_regs = { 0x41, 0x11, 0xa7, 0x14, 0x80, 0x40 },
> + }, {
> + .pixclk = 160000000,
> + .pll_div_regs = { 0x42, 0x12, 0xa1, 0x20, 0x80, 0x40 },
> + }, {
> + .pixclk = 162000000,
> + .pll_div_regs = { 0x43, 0x18, 0x8b, 0x08, 0x96, 0x55 },
> + }, {
> + .pixclk = 164000000,
> + .pll_div_regs = { 0x45, 0x11, 0x83, 0x82, 0x90, 0x4b },
> + }, {
> + .pixclk = 165000000,
> + .pll_div_regs = { 0x45, 0x11, 0x84, 0x81, 0x90, 0x4b },
> + }, {
> + .pixclk = 180000000,
> + .pll_div_regs = { 0x4b, 0x10, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 185625000,
> + .pll_div_regs = { 0x4e, 0x12, 0x9a, 0x95, 0x80, 0x40 },
> + }, {
> + .pixclk = 188000000,
> + .pll_div_regs = { 0x4e, 0x12, 0xa7, 0x10, 0x80, 0x40 },
> + }, {
> + .pixclk = 198000000,
> + .pll_div_regs = { 0x52, 0x12, 0x82, 0x01, 0x88, 0x47 },
> + }, {
> + .pixclk = 205000000,
> + .pll_div_regs = { 0x55, 0x12, 0x8c, 0x05, 0x90, 0x4b },
> + }, {
> + .pixclk = 209500000,
> + .pll_div_regs = { 0x57, 0x12, 0x98, 0x07, 0x90, 0x49 },
> + }, {
> + .pixclk = 213000000,
> + .pll_div_regs = { 0x58, 0x12, 0x84, 0x03, 0x82, 0x41 },
> + }, {
> + .pixclk = 216000000,
> + .pll_div_regs = { 0x5a, 0x10, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 216216000,
> + .pll_div_regs = { 0x5a, 0x12, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 237600000,
> + .pll_div_regs = { 0x63, 0x10, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 254000000,
> + .pll_div_regs = { 0x69, 0x14, 0x89, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 277500000,
> + .pll_div_regs = { 0x73, 0x15, 0x88, 0x05, 0x90, 0x4d },
> + }, {
> + .pixclk = 288000000,
> + .pll_div_regs = { 0x78, 0x10, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 297000000,
> + .pll_div_regs = { 0x7b, 0x15, 0x84, 0x03, 0x90, 0x45 },
> + },
> +};
> +
> +struct reg_settings {
> + u8 reg;
> + u8 val;
> +};
> +
> +const struct reg_settings common_phy_cfg[] = {
> + { PHY_REG_00, 0x00 }, { PHY_REG_01, 0xd1 },
> + { PHY_REG_08, 0x4f }, { PHY_REG_09, 0x30 },
> + { PHY_REG_10, 0x33 }, { PHY_REG_11, 0x65 },
> + /* REG12 pixclk specific */
> + /* REG13 pixclk specific */
> + /* REG14 pixclk specific */
> + { PHY_REG_15, 0x80 }, { PHY_REG_16, 0x6c },
> + { PHY_REG_17, 0xf2 }, { PHY_REG_18, 0x67 },
> + { PHY_REG_19, 0x00 }, { PHY_REG_20, 0x10 },
> + /* REG21 pixclk specific */
> + { PHY_REG_22, 0x30 }, { PHY_REG_23, 0x32 },
> + { PHY_REG_24, 0x60 }, { PHY_REG_25, 0x8f },
> + { PHY_REG_26, 0x00 }, { PHY_REG_27, 0x00 },
> + { PHY_REG_28, 0x08 }, { PHY_REG_29, 0x00 },
> + { PHY_REG_30, 0x00 }, { PHY_REG_31, 0x00 },
> + { PHY_REG_32, 0x00 }, { PHY_REG_33, 0x80 },
> + { PHY_REG_34, 0x00 }, { PHY_REG_35, 0x00 },
> + { PHY_REG_36, 0x00 }, { PHY_REG_37, 0x00 },
> + { PHY_REG_38, 0x00 }, { PHY_REG_39, 0x00 },
> + { PHY_REG_40, 0x00 }, { PHY_REG_41, 0xe0 },
> + { PHY_REG_42, 0x83 }, { PHY_REG_43, 0x0f },
> + { PHY_REG_44, 0x3E }, { PHY_REG_45, 0xf8 },
> + { PHY_REG_46, 0x00 }, { PHY_REG_47, 0x00 }
> +};
> +
> +struct fsl_samsung_hdmi_phy {
> + struct device *dev;
> + void __iomem *regs;
> + struct clk *apbclk;
> + struct clk *refclk;
> +
> + /* clk provider */
> + struct clk_hw hw;
> + const struct phy_config *cur_cfg;
> +};
> +
> +static inline struct fsl_samsung_hdmi_phy *
> +to_fsl_samsung_hdmi_phy(struct clk_hw *hw)
> +{
> + return container_of(hw, struct fsl_samsung_hdmi_phy, hw);
> +}
> +
> +static void
> +fsl_samsung_hdmi_phy_configure_pixclk(struct fsl_samsung_hdmi_phy *phy,
> + const struct phy_config *cfg)
> +{
> + u8 div;
> +
> + switch (cfg->pixclk) {
> + case 22250000 ... 33750000:
> + div = 0xf;
> + break;
> + case 35000000 ... 40000000:
> + div = 0xb;
> + break;
> + case 43200000 ... 47500000:
> + div = 0x9;
> + break;
> + case 50349650 ... 63500000:
> + div = 0x7;
> + break;
> + case 67500000 ... 90000000:
> + div = 0x5;
> + break;
> + case 94000000 ... 148500000:
> + div = 0x3;
> + break;
> + case 154000000 ... 297000000:
> + div = 0x1;
> + break;
> + }
> +
> + writeb(REG21_SEL_TX_CK_INV | FIELD_PREP(REG21_PMS_S_MASK, div),
> + phy->regs + PHY_REG_21);
> +}
> +
> +static void
> +fsl_samsung_hdmi_phy_configure_pll_lock_det(struct fsl_samsung_hdmi_phy
> *phy, + const struct phy_config
*cfg)
> +{
> + u32 pclk = cfg->pixclk;
> + u32 fld_tg_code;
> + u32 pclk_khz;
> + u8 div;
> +
> + switch (cfg->pixclk) {
> + case 22250000 ... 47500000:
> + div = 1;
> + break;
> + case 50349650 ... 99000000:
> + div = 2;
> + break;
> + case 100699300 ... 198000000:
> + div = 4;
> + break;
> + case 205000000 ... 297000000:
> + div = 8;
> + break;
> + }
> +
> + writeb(FIELD_PREP(REG12_CK_DIV_MASK, ilog2(div)), phy->regs +
PHY_REG_12);
> +
> + /*
> + * Calculation for the frequency lock detector target code
(fld_tg_code)
> + * is based on reference manual register description of PHY_REG13
> + * (13.10.3.1.14.2):
> + * 1st) Calculate int_pllclk which is determinded by FLD_CK_DIV
> + * 2nd) Increase resolution to avoid rounding issues
> + * 3th) Do the div (256 / Freq. of int_pllclk) * 24
> + * 4th) Reduce the resolution and always round up since the NXP
> + * settings rounding up always too. TODO: Check if that is
> + * correct.
> + */
> + pclk /= div;
> + pclk_khz = pclk / 1000;
> + fld_tg_code = 256 * 1000 * 1000 / pclk_khz * 24;
> + fld_tg_code = DIV_ROUND_UP(fld_tg_code, 1000);
> +
> + /* FLD_TOL and FLD_RP_CODE taken from downstream driver */
> + writeb(FIELD_PREP(REG13_TG_CODE_LOW_MASK, fld_tg_code),
> + phy->regs + PHY_REG_13);
> + writeb(FIELD_PREP(REG14_TOL_MASK, 2) |
> + FIELD_PREP(REG14_RP_CODE_MASK, 2) |
> + FIELD_PREP(REG14_TG_CODE_HIGH_MASK, fld_tg_code >> 8),
> + phy->regs + PHY_REG_14);
> +}
> +
> +static int fsl_samsung_hdmi_phy_configure(struct fsl_samsung_hdmi_phy *phy,
> + const struct phy_config
*cfg)
> +{
> + int i, ret;
> + u8 val;
> +
> + /* HDMI PHY init */
> + writeb(REG33_FIX_DA, phy->regs + PHY_REG_33);
> +
> + /* common PHY registers */
> + for (i = 0; i < ARRAY_SIZE(common_phy_cfg); i++)
> + writeb(common_phy_cfg[i].val, phy->regs +
common_phy_cfg[i].reg);
> +
> + /* set individual PLL registers PHY_REG2 ... PHY_REG7 */
> + for (i = 0; i < PHY_PLL_DIV_REGS_NUM; i++)
> + writeb(cfg->pll_div_regs[i], phy->regs + PHY_REG_02 + i *
4);
> +
> + fsl_samsung_hdmi_phy_configure_pixclk(phy, cfg);
> + fsl_samsung_hdmi_phy_configure_pll_lock_det(phy, cfg);
> +
> + writeb(REG33_FIX_DA | REG33_MODE_SET_DONE, phy->regs + PHY_REG_33);
> +
> + ret = readb_poll_timeout(phy->regs + PHY_REG_34, val,
> + val & REG34_PLL_LOCK, 50, 20000);
> + if (ret)
> + dev_err(phy->dev, "PLL failed to lock\n");
> +
> + return ret;
> +}
> +
> +static unsigned long phy_clk_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
> +
> + if (!phy->cur_cfg)
> + return 74250000;
> +
> + return phy->cur_cfg->pixclk;
> +}
> +
> +static long phy_clk_round_rate(struct clk_hw *hw,
> + unsigned long rate, unsigned long
*parent_rate)
> +{
> + int i;
> +
> + for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
> + if (phy_pll_cfg[i].pixclk <= rate)
> + return phy_pll_cfg[i].pixclk;
> +
> + return -EINVAL;
> +}
> +
> +static int phy_clk_set_rate(struct clk_hw *hw,
> + unsigned long rate, unsigned long
parent_rate)
> +{
> + struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
> + int i;
> +
> + for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
> + if (phy_pll_cfg[i].pixclk <= rate)
> + break;
> +
> + if (i < 0)
> + return -EINVAL;
> +
> + phy->cur_cfg = &phy_pll_cfg[i];
> +
> + return fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
> +}
> +
> +static const struct clk_ops phy_clk_ops = {
> + .recalc_rate = phy_clk_recalc_rate,
> + .round_rate = phy_clk_round_rate,
> + .set_rate = phy_clk_set_rate,
> +};
> +
> +static int phy_clk_register(struct fsl_samsung_hdmi_phy *phy)
> +{
> + struct device *dev = phy->dev;
> + struct device_node *np = dev->of_node;
> + struct clk_init_data init;
> + const char *parent_name;
> + struct clk *phyclk;
> + int ret;
> +
> + parent_name = __clk_get_name(phy->refclk);
> +
> + init.parent_names = &parent_name;
> + init.num_parents = 1;
> + init.flags = 0;
> + init.name = "hdmi_pclk";
> + init.ops = &phy_clk_ops;
> +
> + phy->hw.init = &init;
> +
> + phyclk = devm_clk_register(dev, &phy->hw);
> + if (IS_ERR(phyclk))
> + return dev_err_probe(dev, PTR_ERR(phyclk),
> + "failed to register clock\n");
> +
> + ret = of_clk_add_provider(np, of_clk_src_simple_get, phyclk);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "failed to register clock
provider\n");
> +
> + return 0;
> +}
> +
> +static int fsl_samsung_hdmi_phy_probe(struct platform_device *pdev)
> +{
> + struct fsl_samsung_hdmi_phy *phy;
> + int ret;
> +
> + phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
> + if (!phy)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, phy);
> + phy->dev = &pdev->dev;
> +
> + phy->regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(phy->regs))
> + return PTR_ERR(phy->regs);
> +
> + phy->apbclk = devm_clk_get(phy->dev, "apb");
> + if (IS_ERR(phy->apbclk))
> + return dev_err_probe(phy->dev, PTR_ERR(phy->apbclk),
> + "failed to get apb clk\n");
> +
> + phy->refclk = devm_clk_get(phy->dev, "ref");
> + if (IS_ERR(phy->refclk))
> + return dev_err_probe(phy->dev, PTR_ERR(phy->refclk),
> + "failed to get ref clk\n");
> +
> + ret = clk_prepare_enable(phy->apbclk);
> + if (ret) {
> + dev_err(phy->dev, "failed to enable apbclk\n");
> + return ret;
> + }
> +
> + pm_runtime_get_noresume(phy->dev);
> + pm_runtime_set_active(phy->dev);
> + pm_runtime_enable(phy->dev);
> +
> + ret = phy_clk_register(phy);
> + if (ret) {
> + dev_err(&pdev->dev, "register clk failed\n");
> + goto register_clk_failed;
> + }
> +
> + pm_runtime_put(phy->dev);
> +
> + return 0;
> +
> +register_clk_failed:
> + clk_disable_unprepare(phy->apbclk);
> +
> + return ret;
> +}
> +
> +static int fsl_samsung_hdmi_phy_remove(struct platform_device *pdev)
> +{
> + of_clk_del_provider(pdev->dev.of_node);
> +
> + return 0;
> +}
> +
> +static int fsl_samsung_hdmi_phy_suspend(struct device *dev)
> +{
> + struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
> +
> + clk_disable_unprepare(phy->apbclk);
> +
> + return 0;
> +}
> +
> +static int fsl_samsung_hdmi_phy_resume(struct device *dev)
> +{
> + struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
> + int ret = 0;
> +
> + ret = clk_prepare_enable(phy->apbclk);
> + if (ret) {
> + dev_err(phy->dev, "failed to enable apbclk\n");
> + return ret;
> + }
> +
> + if (phy->cur_cfg)
> + ret = fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
> +
> + return ret;
> +
> +}
> +
> +static DEFINE_RUNTIME_DEV_PM_OPS(fsl_samsung_hdmi_phy_pm_ops,
> + fsl_samsung_hdmi_phy_suspend,
> + fsl_samsung_hdmi_phy_resume, NULL);
> +
> +static const struct of_device_id fsl_samsung_hdmi_phy_of_match[] = {
> + {
> + .compatible = "fsl,imx8mp-hdmi-phy",
> + }, {
> + /* sentinel */
> + }
> +};
> +MODULE_DEVICE_TABLE(of, fsl_samsung_hdmi_phy_of_match);
> +
> +static struct platform_driver fsl_samsung_hdmi_phy_driver = {
> + .probe = fsl_samsung_hdmi_phy_probe,
> + .remove = fsl_samsung_hdmi_phy_remove,
> + .driver = {
> + .name = "fsl-samsung-hdmi-phy",
> + .of_match_table = fsl_samsung_hdmi_phy_of_match,
> + .pm = pm_ptr(&fsl_samsung_hdmi_phy_pm_ops),
> + },
> +};
> +module_platform_driver(fsl_samsung_hdmi_phy_driver);
> +
> +MODULE_AUTHOR("Sandor Yu <Sandor.yu@nxp.com>");
> +MODULE_DESCRIPTION("SAMSUNG HDMI 2.0 Transmitter PHY Driver");
> +MODULE_LICENSE("GPL");
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Lucas Stach <l.stach@pengutronix.de>
Cc: Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
linux-arm-kernel@lists.infradead.org,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
patchwork-lst@pengutronix.de,
Luca Ceresoli <luca.ceresoli@bootlin.com>,
Richard Leitner <richard.leitner@skidata.com>
Subject: Re: [PATCH v3 2/2] phy: freescale: add Samsung HDMI PHY
Date: Thu, 07 Sep 2023 08:39:42 +0200 [thread overview]
Message-ID: <4830698.GXAFRqVoOG@steina-w> (raw)
In-Reply-To: <20230906184211.1857585-2-l.stach@pengutronix.de>
Hi Lucas,
Am Mittwoch, 6. September 2023, 20:42:11 CEST schrieb Lucas Stach:
> This adds the driver for the Samsung HDMI PHY found on the
> i.MX8MP SoC. Based on downstream implementation from
> Sandor Yu <Sandor.yu@nxp.com>.
>
> Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> (v2)
> Tested-by: Richard Leitner <richard.leitner@skidata.com> (v2)
> Co-developed-by: Marco Felsch <m.felsch@pengutronix.de>
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
On TQMa8MPxL + MBa8MPxL:
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> ---
> v3:
> - use GENMASK/FIELD_PREP
> - lowercase hex values
> - correct coding style
> v2:
> - use DEFINE_RUNTIME_DEV_PM_OPS
> ---
> drivers/phy/freescale/Kconfig | 6 +
> drivers/phy/freescale/Makefile | 1 +
> drivers/phy/freescale/phy-fsl-samsung-hdmi.c | 717 +++++++++++++++++++
> 3 files changed, 724 insertions(+)
> create mode 100644 drivers/phy/freescale/phy-fsl-samsung-hdmi.c
>
> diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
> index 853958fb2c06..5c2b73042dfc 100644
> --- a/drivers/phy/freescale/Kconfig
> +++ b/drivers/phy/freescale/Kconfig
> @@ -35,6 +35,12 @@ config PHY_FSL_IMX8M_PCIE
> Enable this to add support for the PCIE PHY as found on
> i.MX8M family of SOCs.
>
> +config PHY_FSL_SAMSUNG_HDMI_PHY
> + tristate "Samsung HDMI PHY support"
> + depends on OF && HAS_IOMEM
> + help
> + Enable this to add support for the Samsung HDMI PHY in i.MX8MP.
> +
> endif
>
> config PHY_FSL_LYNX_28G
> diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
> index cedb328bc4d2..c4386bfdb853 100644
> --- a/drivers/phy/freescale/Makefile
> +++ b/drivers/phy/freescale/Makefile
> @@ -4,3 +4,4 @@ obj-$(CONFIG_PHY_MIXEL_LVDS_PHY) +=
> phy-fsl-imx8qm-lvds-phy.o obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY) +=
> phy-fsl-imx8-mipi-dphy.o
> obj-$(CONFIG_PHY_FSL_IMX8M_PCIE) += phy-fsl-imx8m-pcie.o
> obj-$(CONFIG_PHY_FSL_LYNX_28G) += phy-fsl-lynx-28g.o
> +obj-$(CONFIG_PHY_FSL_SAMSUNG_HDMI_PHY) += phy-fsl-samsung-hdmi.o
> diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c new file mode 100644
> index 000000000000..ce712cfefd62
> --- /dev/null
> +++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> @@ -0,0 +1,717 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2020 NXP
> + * Copyright 2022 Pengutronix, Lucas Stach <kernel@pengutronix.de>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +
> +#define PHY_REG_00 0x00
> +#define PHY_REG_01 0x04
> +#define PHY_REG_02 0x08
> +#define PHY_REG_08 0x20
> +#define PHY_REG_09 0x24
> +#define PHY_REG_10 0x28
> +#define PHY_REG_11 0x2c
> +
> +#define PHY_REG_12 0x30
> +#define REG12_CK_DIV_MASK GENMASK(5, 4)
> +
> +#define PHY_REG_13 0x34
> +#define REG13_TG_CODE_LOW_MASK GENMASK(7, 0)
> +
> +#define PHY_REG_14 0x38
> +#define REG14_TOL_MASK GENMASK(7, 4)
> +#define REG14_RP_CODE_MASK GENMASK(2, 1)
> +#define REG14_TG_CODE_HIGH_MASK GENMASK(0, 0)
> +
> +#define PHY_REG_15 0x3c
> +#define PHY_REG_16 0x40
> +#define PHY_REG_17 0x44
> +#define PHY_REG_18 0x48
> +#define PHY_REG_19 0x4c
> +#define PHY_REG_20 0x50
> +
> +#define PHY_REG_21 0x54
> +#define REG21_SEL_TX_CK_INV BIT(7)
> +#define REG21_PMS_S_MASK GENMASK(3, 0)
> +
> +#define PHY_REG_22 0x58
> +#define PHY_REG_23 0x5c
> +#define PHY_REG_24 0x60
> +#define PHY_REG_25 0x64
> +#define PHY_REG_26 0x68
> +#define PHY_REG_27 0x6c
> +#define PHY_REG_28 0x70
> +#define PHY_REG_29 0x74
> +#define PHY_REG_30 0x78
> +#define PHY_REG_31 0x7c
> +#define PHY_REG_32 0x80
> +
> +#define PHY_REG_33 0x84
> +#define REG33_MODE_SET_DONE BIT(7)
> +#define REG33_FIX_DA BIT(1)
> +
> +#define PHY_REG_34 0x88
> +#define REG34_PHY_READY BIT(7)
> +#define REG34_PLL_LOCK BIT(6)
> +#define REG34_PHY_CLK_READY BIT(5)
> +
> +#define PHY_REG_35 0x8c
> +#define PHY_REG_36 0x90
> +#define PHY_REG_37 0x94
> +#define PHY_REG_38 0x98
> +#define PHY_REG_39 0x9c
> +#define PHY_REG_40 0xa0
> +#define PHY_REG_41 0xa4
> +#define PHY_REG_42 0xa8
> +#define PHY_REG_43 0xac
> +#define PHY_REG_44 0xb0
> +#define PHY_REG_45 0xb4
> +#define PHY_REG_46 0xb8
> +#define PHY_REG_47 0xbc
> +
> +#define PHY_PLL_DIV_REGS_NUM 6
> +
> +struct phy_config {
> + u32 pixclk;
> + u8 pll_div_regs[PHY_PLL_DIV_REGS_NUM];
> +};
> +
> +const struct phy_config phy_pll_cfg[] = {
> + {
> + .pixclk = 22250000,
> + .pll_div_regs = { 0x4b, 0xf1, 0x89, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 23750000,
> + .pll_div_regs = { 0x50, 0xf1, 0x86, 0x85, 0x80, 0x40 },
> + }, {
> + .pixclk = 24000000,
> + .pll_div_regs = { 0x50, 0xf0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 24024000,
> + .pll_div_regs = { 0x50, 0xf1, 0x99, 0x02, 0x80, 0x40 },
> + }, {
> + .pixclk = 25175000,
> + .pll_div_regs = { 0x54, 0xfc, 0xcc, 0x91, 0x80, 0x40 },
> + }, {
> + .pixclk = 25200000,
> + .pll_div_regs = { 0x54, 0xf0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 26750000,
> + .pll_div_regs = { 0x5a, 0xf2, 0x89, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 27000000,
> + .pll_div_regs = { 0x5a, 0xf0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 27027000,
> + .pll_div_regs = { 0x5a, 0xf2, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 29500000,
> + .pll_div_regs = { 0x62, 0xf4, 0x95, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 30750000,
> + .pll_div_regs = { 0x66, 0xf4, 0x82, 0x01, 0x88, 0x45 },
> + }, {
> + .pixclk = 30888000,
> + .pll_div_regs = { 0x66, 0xf4, 0x99, 0x18, 0x88, 0x45 },
> + }, {
> + .pixclk = 33750000,
> + .pll_div_regs = { 0x70, 0xf4, 0x82, 0x01, 0x80, 0x40 },
> + }, {
> + .pixclk = 35000000,
> + .pll_div_regs = { 0x58, 0xb8, 0x8b, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 36000000,
> + .pll_div_regs = { 0x5a, 0xb0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 36036000,
> + .pll_div_regs = { 0x5a, 0xb2, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 40000000,
> + .pll_div_regs = { 0x64, 0xb0, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 43200000,
> + .pll_div_regs = { 0x5a, 0x90, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 43243200,
> + .pll_div_regs = { 0x5a, 0x92, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 44500000,
> + .pll_div_regs = { 0x5c, 0x92, 0x98, 0x11, 0x84, 0x41 },
> + }, {
> + .pixclk = 47000000,
> + .pll_div_regs = { 0x62, 0x94, 0x95, 0x82, 0x80, 0x40 },
> + }, {
> + .pixclk = 47500000,
> + .pll_div_regs = { 0x63, 0x96, 0xa1, 0x82, 0x80, 0x40 },
> + }, {
> + .pixclk = 50349650,
> + .pll_div_regs = { 0x54, 0x7c, 0xc3, 0x8f, 0x80, 0x40 },
> + }, {
> + .pixclk = 50400000,
> + .pll_div_regs = { 0x54, 0x70, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 53250000,
> + .pll_div_regs = { 0x58, 0x72, 0x84, 0x03, 0x82, 0x41 },
> + }, {
> + .pixclk = 53500000,
> + .pll_div_regs = { 0x5a, 0x72, 0x89, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 54000000,
> + .pll_div_regs = { 0x5a, 0x70, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 54054000,
> + .pll_div_regs = { 0x5a, 0x72, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 59000000,
> + .pll_div_regs = { 0x62, 0x74, 0x95, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 59340659,
> + .pll_div_regs = { 0x62, 0x74, 0xdb, 0x52, 0x88, 0x47 },
> + }, {
> + .pixclk = 59400000,
> + .pll_div_regs = { 0x63, 0x70, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 61500000,
> + .pll_div_regs = { 0x66, 0x74, 0x82, 0x01, 0x88, 0x45 },
> + }, {
> + .pixclk = 63500000,
> + .pll_div_regs = { 0x69, 0x74, 0x89, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 67500000,
> + .pll_div_regs = { 0x54, 0x52, 0x87, 0x03, 0x80, 0x40 },
> + }, {
> + .pixclk = 70000000,
> + .pll_div_regs = { 0x58, 0x58, 0x8b, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 72000000,
> + .pll_div_regs = { 0x5a, 0x50, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 72072000,
> + .pll_div_regs = { 0x5a, 0x52, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 74176000,
> + .pll_div_regs = { 0x5d, 0x58, 0xdb, 0xA2, 0x88, 0x41 },
> + }, {
> + .pixclk = 74250000,
> + .pll_div_regs = { 0x5c, 0x52, 0x90, 0x0d, 0x84, 0x41 },
> + }, {
> + .pixclk = 78500000,
> + .pll_div_regs = { 0x62, 0x54, 0x87, 0x01, 0x80, 0x40 },
> + }, {
> + .pixclk = 80000000,
> + .pll_div_regs = { 0x64, 0x50, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 82000000,
> + .pll_div_regs = { 0x66, 0x54, 0x82, 0x01, 0x88, 0x45 },
> + }, {
> + .pixclk = 82500000,
> + .pll_div_regs = { 0x67, 0x54, 0x88, 0x01, 0x90, 0x49 },
> + }, {
> + .pixclk = 89000000,
> + .pll_div_regs = { 0x70, 0x54, 0x84, 0x83, 0x80, 0x40 },
> + }, {
> + .pixclk = 90000000,
> + .pll_div_regs = { 0x70, 0x54, 0x82, 0x01, 0x80, 0x40 },
> + }, {
> + .pixclk = 94000000,
> + .pll_div_regs = { 0x4e, 0x32, 0xa7, 0x10, 0x80, 0x40 },
> + }, {
> + .pixclk = 95000000,
> + .pll_div_regs = { 0x50, 0x31, 0x86, 0x85, 0x80, 0x40 },
> + }, {
> + .pixclk = 98901099,
> + .pll_div_regs = { 0x52, 0x3a, 0xdb, 0x4c, 0x88, 0x47 },
> + }, {
> + .pixclk = 99000000,
> + .pll_div_regs = { 0x52, 0x32, 0x82, 0x01, 0x88, 0x47 },
> + }, {
> + .pixclk = 100699300,
> + .pll_div_regs = { 0x54, 0x3c, 0xc3, 0x8f, 0x80, 0x40 },
> + }, {
> + .pixclk = 100800000,
> + .pll_div_regs = { 0x54, 0x30, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 102500000,
> + .pll_div_regs = { 0x55, 0x32, 0x8c, 0x05, 0x90, 0x4b },
> + }, {
> + .pixclk = 104750000,
> + .pll_div_regs = { 0x57, 0x32, 0x98, 0x07, 0x90, 0x49 },
> + }, {
> + .pixclk = 106500000,
> + .pll_div_regs = { 0x58, 0x32, 0x84, 0x03, 0x82, 0x41 },
> + }, {
> + .pixclk = 107000000,
> + .pll_div_regs = { 0x5a, 0x32, 0x89, 0x88, 0x80, 0x40 },
> + }, {
> + .pixclk = 108000000,
> + .pll_div_regs = { 0x5a, 0x30, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 108108000,
> + .pll_div_regs = { 0x5a, 0x32, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 118000000,
> + .pll_div_regs = { 0x62, 0x34, 0x95, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 118800000,
> + .pll_div_regs = { 0x63, 0x30, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 123000000,
> + .pll_div_regs = { 0x66, 0x34, 0x82, 0x01, 0x88, 0x45 },
> + }, {
> + .pixclk = 127000000,
> + .pll_div_regs = { 0x69, 0x34, 0x89, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 135000000,
> + .pll_div_regs = { 0x70, 0x34, 0x82, 0x01, 0x80, 0x40 },
> + }, {
> + .pixclk = 135580000,
> + .pll_div_regs = { 0x71, 0x39, 0xe9, 0x82, 0x9c, 0x5b },
> + }, {
> + .pixclk = 137520000,
> + .pll_div_regs = { 0x72, 0x38, 0x99, 0x10, 0x85, 0x41 },
> + }, {
> + .pixclk = 138750000,
> + .pll_div_regs = { 0x73, 0x35, 0x88, 0x05, 0x90, 0x4d },
> + }, {
> + .pixclk = 140000000,
> + .pll_div_regs = { 0x75, 0x36, 0xa7, 0x90, 0x80, 0x40 },
> + }, {
> + .pixclk = 144000000,
> + .pll_div_regs = { 0x78, 0x30, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 148352000,
> + .pll_div_regs = { 0x7b, 0x35, 0xdb, 0x39, 0x90, 0x45 },
> + }, {
> + .pixclk = 148500000,
> + .pll_div_regs = { 0x7b, 0x35, 0x84, 0x03, 0x90, 0x45 },
> + }, {
> + .pixclk = 154000000,
> + .pll_div_regs = { 0x40, 0x18, 0x83, 0x01, 0x00, 0x40 },
> + }, {
> + .pixclk = 157000000,
> + .pll_div_regs = { 0x41, 0x11, 0xa7, 0x14, 0x80, 0x40 },
> + }, {
> + .pixclk = 160000000,
> + .pll_div_regs = { 0x42, 0x12, 0xa1, 0x20, 0x80, 0x40 },
> + }, {
> + .pixclk = 162000000,
> + .pll_div_regs = { 0x43, 0x18, 0x8b, 0x08, 0x96, 0x55 },
> + }, {
> + .pixclk = 164000000,
> + .pll_div_regs = { 0x45, 0x11, 0x83, 0x82, 0x90, 0x4b },
> + }, {
> + .pixclk = 165000000,
> + .pll_div_regs = { 0x45, 0x11, 0x84, 0x81, 0x90, 0x4b },
> + }, {
> + .pixclk = 180000000,
> + .pll_div_regs = { 0x4b, 0x10, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 185625000,
> + .pll_div_regs = { 0x4e, 0x12, 0x9a, 0x95, 0x80, 0x40 },
> + }, {
> + .pixclk = 188000000,
> + .pll_div_regs = { 0x4e, 0x12, 0xa7, 0x10, 0x80, 0x40 },
> + }, {
> + .pixclk = 198000000,
> + .pll_div_regs = { 0x52, 0x12, 0x82, 0x01, 0x88, 0x47 },
> + }, {
> + .pixclk = 205000000,
> + .pll_div_regs = { 0x55, 0x12, 0x8c, 0x05, 0x90, 0x4b },
> + }, {
> + .pixclk = 209500000,
> + .pll_div_regs = { 0x57, 0x12, 0x98, 0x07, 0x90, 0x49 },
> + }, {
> + .pixclk = 213000000,
> + .pll_div_regs = { 0x58, 0x12, 0x84, 0x03, 0x82, 0x41 },
> + }, {
> + .pixclk = 216000000,
> + .pll_div_regs = { 0x5a, 0x10, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 216216000,
> + .pll_div_regs = { 0x5a, 0x12, 0xfd, 0x0c, 0x80, 0x40 },
> + }, {
> + .pixclk = 237600000,
> + .pll_div_regs = { 0x63, 0x10, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 254000000,
> + .pll_div_regs = { 0x69, 0x14, 0x89, 0x08, 0x80, 0x40 },
> + }, {
> + .pixclk = 277500000,
> + .pll_div_regs = { 0x73, 0x15, 0x88, 0x05, 0x90, 0x4d },
> + }, {
> + .pixclk = 288000000,
> + .pll_div_regs = { 0x78, 0x10, 0x00, 0x00, 0x80, 0x00 },
> + }, {
> + .pixclk = 297000000,
> + .pll_div_regs = { 0x7b, 0x15, 0x84, 0x03, 0x90, 0x45 },
> + },
> +};
> +
> +struct reg_settings {
> + u8 reg;
> + u8 val;
> +};
> +
> +const struct reg_settings common_phy_cfg[] = {
> + { PHY_REG_00, 0x00 }, { PHY_REG_01, 0xd1 },
> + { PHY_REG_08, 0x4f }, { PHY_REG_09, 0x30 },
> + { PHY_REG_10, 0x33 }, { PHY_REG_11, 0x65 },
> + /* REG12 pixclk specific */
> + /* REG13 pixclk specific */
> + /* REG14 pixclk specific */
> + { PHY_REG_15, 0x80 }, { PHY_REG_16, 0x6c },
> + { PHY_REG_17, 0xf2 }, { PHY_REG_18, 0x67 },
> + { PHY_REG_19, 0x00 }, { PHY_REG_20, 0x10 },
> + /* REG21 pixclk specific */
> + { PHY_REG_22, 0x30 }, { PHY_REG_23, 0x32 },
> + { PHY_REG_24, 0x60 }, { PHY_REG_25, 0x8f },
> + { PHY_REG_26, 0x00 }, { PHY_REG_27, 0x00 },
> + { PHY_REG_28, 0x08 }, { PHY_REG_29, 0x00 },
> + { PHY_REG_30, 0x00 }, { PHY_REG_31, 0x00 },
> + { PHY_REG_32, 0x00 }, { PHY_REG_33, 0x80 },
> + { PHY_REG_34, 0x00 }, { PHY_REG_35, 0x00 },
> + { PHY_REG_36, 0x00 }, { PHY_REG_37, 0x00 },
> + { PHY_REG_38, 0x00 }, { PHY_REG_39, 0x00 },
> + { PHY_REG_40, 0x00 }, { PHY_REG_41, 0xe0 },
> + { PHY_REG_42, 0x83 }, { PHY_REG_43, 0x0f },
> + { PHY_REG_44, 0x3E }, { PHY_REG_45, 0xf8 },
> + { PHY_REG_46, 0x00 }, { PHY_REG_47, 0x00 }
> +};
> +
> +struct fsl_samsung_hdmi_phy {
> + struct device *dev;
> + void __iomem *regs;
> + struct clk *apbclk;
> + struct clk *refclk;
> +
> + /* clk provider */
> + struct clk_hw hw;
> + const struct phy_config *cur_cfg;
> +};
> +
> +static inline struct fsl_samsung_hdmi_phy *
> +to_fsl_samsung_hdmi_phy(struct clk_hw *hw)
> +{
> + return container_of(hw, struct fsl_samsung_hdmi_phy, hw);
> +}
> +
> +static void
> +fsl_samsung_hdmi_phy_configure_pixclk(struct fsl_samsung_hdmi_phy *phy,
> + const struct phy_config *cfg)
> +{
> + u8 div;
> +
> + switch (cfg->pixclk) {
> + case 22250000 ... 33750000:
> + div = 0xf;
> + break;
> + case 35000000 ... 40000000:
> + div = 0xb;
> + break;
> + case 43200000 ... 47500000:
> + div = 0x9;
> + break;
> + case 50349650 ... 63500000:
> + div = 0x7;
> + break;
> + case 67500000 ... 90000000:
> + div = 0x5;
> + break;
> + case 94000000 ... 148500000:
> + div = 0x3;
> + break;
> + case 154000000 ... 297000000:
> + div = 0x1;
> + break;
> + }
> +
> + writeb(REG21_SEL_TX_CK_INV | FIELD_PREP(REG21_PMS_S_MASK, div),
> + phy->regs + PHY_REG_21);
> +}
> +
> +static void
> +fsl_samsung_hdmi_phy_configure_pll_lock_det(struct fsl_samsung_hdmi_phy
> *phy, + const struct phy_config
*cfg)
> +{
> + u32 pclk = cfg->pixclk;
> + u32 fld_tg_code;
> + u32 pclk_khz;
> + u8 div;
> +
> + switch (cfg->pixclk) {
> + case 22250000 ... 47500000:
> + div = 1;
> + break;
> + case 50349650 ... 99000000:
> + div = 2;
> + break;
> + case 100699300 ... 198000000:
> + div = 4;
> + break;
> + case 205000000 ... 297000000:
> + div = 8;
> + break;
> + }
> +
> + writeb(FIELD_PREP(REG12_CK_DIV_MASK, ilog2(div)), phy->regs +
PHY_REG_12);
> +
> + /*
> + * Calculation for the frequency lock detector target code
(fld_tg_code)
> + * is based on reference manual register description of PHY_REG13
> + * (13.10.3.1.14.2):
> + * 1st) Calculate int_pllclk which is determinded by FLD_CK_DIV
> + * 2nd) Increase resolution to avoid rounding issues
> + * 3th) Do the div (256 / Freq. of int_pllclk) * 24
> + * 4th) Reduce the resolution and always round up since the NXP
> + * settings rounding up always too. TODO: Check if that is
> + * correct.
> + */
> + pclk /= div;
> + pclk_khz = pclk / 1000;
> + fld_tg_code = 256 * 1000 * 1000 / pclk_khz * 24;
> + fld_tg_code = DIV_ROUND_UP(fld_tg_code, 1000);
> +
> + /* FLD_TOL and FLD_RP_CODE taken from downstream driver */
> + writeb(FIELD_PREP(REG13_TG_CODE_LOW_MASK, fld_tg_code),
> + phy->regs + PHY_REG_13);
> + writeb(FIELD_PREP(REG14_TOL_MASK, 2) |
> + FIELD_PREP(REG14_RP_CODE_MASK, 2) |
> + FIELD_PREP(REG14_TG_CODE_HIGH_MASK, fld_tg_code >> 8),
> + phy->regs + PHY_REG_14);
> +}
> +
> +static int fsl_samsung_hdmi_phy_configure(struct fsl_samsung_hdmi_phy *phy,
> + const struct phy_config
*cfg)
> +{
> + int i, ret;
> + u8 val;
> +
> + /* HDMI PHY init */
> + writeb(REG33_FIX_DA, phy->regs + PHY_REG_33);
> +
> + /* common PHY registers */
> + for (i = 0; i < ARRAY_SIZE(common_phy_cfg); i++)
> + writeb(common_phy_cfg[i].val, phy->regs +
common_phy_cfg[i].reg);
> +
> + /* set individual PLL registers PHY_REG2 ... PHY_REG7 */
> + for (i = 0; i < PHY_PLL_DIV_REGS_NUM; i++)
> + writeb(cfg->pll_div_regs[i], phy->regs + PHY_REG_02 + i *
4);
> +
> + fsl_samsung_hdmi_phy_configure_pixclk(phy, cfg);
> + fsl_samsung_hdmi_phy_configure_pll_lock_det(phy, cfg);
> +
> + writeb(REG33_FIX_DA | REG33_MODE_SET_DONE, phy->regs + PHY_REG_33);
> +
> + ret = readb_poll_timeout(phy->regs + PHY_REG_34, val,
> + val & REG34_PLL_LOCK, 50, 20000);
> + if (ret)
> + dev_err(phy->dev, "PLL failed to lock\n");
> +
> + return ret;
> +}
> +
> +static unsigned long phy_clk_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
> +
> + if (!phy->cur_cfg)
> + return 74250000;
> +
> + return phy->cur_cfg->pixclk;
> +}
> +
> +static long phy_clk_round_rate(struct clk_hw *hw,
> + unsigned long rate, unsigned long
*parent_rate)
> +{
> + int i;
> +
> + for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
> + if (phy_pll_cfg[i].pixclk <= rate)
> + return phy_pll_cfg[i].pixclk;
> +
> + return -EINVAL;
> +}
> +
> +static int phy_clk_set_rate(struct clk_hw *hw,
> + unsigned long rate, unsigned long
parent_rate)
> +{
> + struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
> + int i;
> +
> + for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
> + if (phy_pll_cfg[i].pixclk <= rate)
> + break;
> +
> + if (i < 0)
> + return -EINVAL;
> +
> + phy->cur_cfg = &phy_pll_cfg[i];
> +
> + return fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
> +}
> +
> +static const struct clk_ops phy_clk_ops = {
> + .recalc_rate = phy_clk_recalc_rate,
> + .round_rate = phy_clk_round_rate,
> + .set_rate = phy_clk_set_rate,
> +};
> +
> +static int phy_clk_register(struct fsl_samsung_hdmi_phy *phy)
> +{
> + struct device *dev = phy->dev;
> + struct device_node *np = dev->of_node;
> + struct clk_init_data init;
> + const char *parent_name;
> + struct clk *phyclk;
> + int ret;
> +
> + parent_name = __clk_get_name(phy->refclk);
> +
> + init.parent_names = &parent_name;
> + init.num_parents = 1;
> + init.flags = 0;
> + init.name = "hdmi_pclk";
> + init.ops = &phy_clk_ops;
> +
> + phy->hw.init = &init;
> +
> + phyclk = devm_clk_register(dev, &phy->hw);
> + if (IS_ERR(phyclk))
> + return dev_err_probe(dev, PTR_ERR(phyclk),
> + "failed to register clock\n");
> +
> + ret = of_clk_add_provider(np, of_clk_src_simple_get, phyclk);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "failed to register clock
provider\n");
> +
> + return 0;
> +}
> +
> +static int fsl_samsung_hdmi_phy_probe(struct platform_device *pdev)
> +{
> + struct fsl_samsung_hdmi_phy *phy;
> + int ret;
> +
> + phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
> + if (!phy)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, phy);
> + phy->dev = &pdev->dev;
> +
> + phy->regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(phy->regs))
> + return PTR_ERR(phy->regs);
> +
> + phy->apbclk = devm_clk_get(phy->dev, "apb");
> + if (IS_ERR(phy->apbclk))
> + return dev_err_probe(phy->dev, PTR_ERR(phy->apbclk),
> + "failed to get apb clk\n");
> +
> + phy->refclk = devm_clk_get(phy->dev, "ref");
> + if (IS_ERR(phy->refclk))
> + return dev_err_probe(phy->dev, PTR_ERR(phy->refclk),
> + "failed to get ref clk\n");
> +
> + ret = clk_prepare_enable(phy->apbclk);
> + if (ret) {
> + dev_err(phy->dev, "failed to enable apbclk\n");
> + return ret;
> + }
> +
> + pm_runtime_get_noresume(phy->dev);
> + pm_runtime_set_active(phy->dev);
> + pm_runtime_enable(phy->dev);
> +
> + ret = phy_clk_register(phy);
> + if (ret) {
> + dev_err(&pdev->dev, "register clk failed\n");
> + goto register_clk_failed;
> + }
> +
> + pm_runtime_put(phy->dev);
> +
> + return 0;
> +
> +register_clk_failed:
> + clk_disable_unprepare(phy->apbclk);
> +
> + return ret;
> +}
> +
> +static int fsl_samsung_hdmi_phy_remove(struct platform_device *pdev)
> +{
> + of_clk_del_provider(pdev->dev.of_node);
> +
> + return 0;
> +}
> +
> +static int fsl_samsung_hdmi_phy_suspend(struct device *dev)
> +{
> + struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
> +
> + clk_disable_unprepare(phy->apbclk);
> +
> + return 0;
> +}
> +
> +static int fsl_samsung_hdmi_phy_resume(struct device *dev)
> +{
> + struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
> + int ret = 0;
> +
> + ret = clk_prepare_enable(phy->apbclk);
> + if (ret) {
> + dev_err(phy->dev, "failed to enable apbclk\n");
> + return ret;
> + }
> +
> + if (phy->cur_cfg)
> + ret = fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
> +
> + return ret;
> +
> +}
> +
> +static DEFINE_RUNTIME_DEV_PM_OPS(fsl_samsung_hdmi_phy_pm_ops,
> + fsl_samsung_hdmi_phy_suspend,
> + fsl_samsung_hdmi_phy_resume, NULL);
> +
> +static const struct of_device_id fsl_samsung_hdmi_phy_of_match[] = {
> + {
> + .compatible = "fsl,imx8mp-hdmi-phy",
> + }, {
> + /* sentinel */
> + }
> +};
> +MODULE_DEVICE_TABLE(of, fsl_samsung_hdmi_phy_of_match);
> +
> +static struct platform_driver fsl_samsung_hdmi_phy_driver = {
> + .probe = fsl_samsung_hdmi_phy_probe,
> + .remove = fsl_samsung_hdmi_phy_remove,
> + .driver = {
> + .name = "fsl-samsung-hdmi-phy",
> + .of_match_table = fsl_samsung_hdmi_phy_of_match,
> + .pm = pm_ptr(&fsl_samsung_hdmi_phy_pm_ops),
> + },
> +};
> +module_platform_driver(fsl_samsung_hdmi_phy_driver);
> +
> +MODULE_AUTHOR("Sandor Yu <Sandor.yu@nxp.com>");
> +MODULE_DESCRIPTION("SAMSUNG HDMI 2.0 Transmitter PHY Driver");
> +MODULE_LICENSE("GPL");
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
next prev parent reply other threads:[~2023-09-07 6:39 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-06 18:42 [PATCH v3 1/2] dt-bindings: phy: add binding for the i.MX8MP HDMI PHY Lucas Stach
2023-09-06 18:42 ` Lucas Stach
2023-09-06 18:42 ` Lucas Stach
2023-09-06 18:42 ` [PATCH v3 2/2] phy: freescale: add Samsung " Lucas Stach
2023-09-06 18:42 ` Lucas Stach
2023-09-06 18:42 ` Lucas Stach
2023-09-07 6:39 ` Alexander Stein [this message]
2023-09-07 6:39 ` Alexander Stein
2023-09-07 6:39 ` Alexander Stein
2023-09-07 9:13 ` Frieder Schrempf
2023-09-07 9:13 ` Frieder Schrempf
2023-09-07 9:13 ` Frieder Schrempf
2023-09-14 21:16 ` Luca Ceresoli
2023-09-14 21:16 ` Luca Ceresoli
2023-09-14 21:16 ` Luca Ceresoli
2023-09-15 1:49 ` [EXT] " Sandor Yu
2023-09-15 1:49 ` Sandor Yu
2023-09-15 1:49 ` Sandor Yu
2023-09-15 6:57 ` Luca Ceresoli
2023-09-15 6:57 ` Luca Ceresoli
2023-09-15 6:57 ` Luca Ceresoli
2023-10-13 10:37 ` Vinod Koul
2023-10-13 10:37 ` Vinod Koul
2023-10-13 10:37 ` Vinod Koul
2023-09-06 19:14 ` [PATCH v3 1/2] dt-bindings: phy: add binding for the i.MX8MP " Rob Herring
2023-09-06 19:14 ` Rob Herring
2023-09-06 19:14 ` Rob Herring
2023-09-14 21:16 ` Luca Ceresoli
2023-09-14 21:16 ` Luca Ceresoli
2023-09-14 21:16 ` Luca Ceresoli
2023-09-27 13:47 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4830698.GXAFRqVoOG@steina-w \
--to=alexander.stein@ew.tq-group.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=kishon@kernel.org \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-phy@lists.infradead.org \
--cc=luca.ceresoli@bootlin.com \
--cc=patchwork-lst@pengutronix.de \
--cc=richard.leitner@skidata.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.