From: Rene Herman <rene.herman@keyaccess.nl>
To: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>, lm-sensors@lm-sensors.org
Subject: [lm-sensors] LMSENSORS: 2.6.26-rc,
Date: Sun, 22 Jun 2008 00:47:24 +0000 [thread overview]
Message-ID: <485DA11C.7050906@keyaccess.nl> (raw)
Good day.
On 2.6.26-rc and perhaps earlier, when I enable the ACPI Thermal Zone
support (CONFIG_ACPI_THERMAL) I see in dmesg:
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (56 C)
My /sys/class/hwmon/hwmon0 (a W83782D chip) becomes hwmon1, there's a
new /sys/class/hwmon/hwmon0 and "sensors -s" craps out with:
# sensors -s
Can't access procfs/sysfs file
Kernel interface access error
For 2.6 kernels, make sure you have mounted sysfs and libsensors
was compiled with sysfs support!
# sensors --version
sensors version 2.10.6 with libsensors version 2.10.6
This is the slackware 12.1 (recent) standard version. What's wrong?
In case it's useful, my /etc/sensors.conf is at:
http://members.home.nl/rene.herman/sensors.conf
Rene.
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
WARNING: multiple messages have this Message-ID (diff)
From: Rene Herman <rene.herman@keyaccess.nl>
To: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>, lm-sensors@lm-sensors.org
Subject: LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors
Date: Sun, 22 Jun 2008 02:47:24 +0200 [thread overview]
Message-ID: <485DA11C.7050906@keyaccess.nl> (raw)
Good day.
On 2.6.26-rc and perhaps earlier, when I enable the ACPI Thermal Zone
support (CONFIG_ACPI_THERMAL) I see in dmesg:
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (56 C)
My /sys/class/hwmon/hwmon0 (a W83782D chip) becomes hwmon1, there's a
new /sys/class/hwmon/hwmon0 and "sensors -s" craps out with:
# sensors -s
Can't access procfs/sysfs file
Kernel interface access error
For 2.6 kernels, make sure you have mounted sysfs and libsensors
was compiled with sysfs support!
# sensors --version
sensors version 2.10.6 with libsensors version 2.10.6
This is the slackware 12.1 (recent) standard version. What's wrong?
In case it's useful, my /etc/sensors.conf is at:
http://members.home.nl/rene.herman/sensors.conf
Rene.
next reply other threads:[~2008-06-22 0:47 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-22 0:47 Rene Herman [this message]
2008-06-22 0:47 ` LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Rene Herman
2008-06-22 7:28 ` [lm-sensors] LMSENSORS: 2.6.26-rc, Hans de Goede
2008-06-22 7:28 ` [lm-sensors] LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Hans de Goede
2008-06-22 13:15 ` [REGRESSION, ABI] " Rene Herman
2008-06-22 13:15 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, Rene Herman
2008-06-22 13:23 ` [REGRESSION, ABI] Re: [lm-sensors] LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Rene Herman
2008-06-22 13:23 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, Rene Herman
2008-06-22 14:29 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Hans de Goede
2008-06-22 14:29 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, Hans de Goede
2008-06-22 15:26 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Rene Herman
2008-06-22 15:26 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, Rene Herman
2008-06-22 18:07 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Hans de Goede
2008-06-22 18:07 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, Hans de Goede
2008-06-22 18:25 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Rene Herman
2008-06-22 18:25 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, Rene Herman
2008-06-22 21:58 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Rene Herman
2008-06-22 21:58 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, Rene Herman
2008-06-23 1:44 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Zhang Rui
2008-06-23 1:44 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, Zhang Rui
2008-06-23 5:21 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Hans de Goede
2008-06-23 5:21 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, Hans de Goede
2008-06-23 10:40 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Rene Herman
2008-06-23 10:40 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, Rene Herman
2008-06-23 11:06 ` LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Jean Delvare
2008-06-23 11:06 ` [lm-sensors] LMSENSORS: 2.6.26-rc, Jean Delvare
2008-06-23 10:56 ` LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Jean Delvare
2008-06-23 10:56 ` [lm-sensors] LMSENSORS: 2.6.26-rc, Jean Delvare
2008-06-23 17:54 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Len Brown
2008-06-23 17:54 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, Len Brown
2008-06-23 19:54 ` LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Jean Delvare
2008-06-23 19:54 ` [lm-sensors] LMSENSORS: 2.6.26-rc, Jean Delvare
2008-06-23 20:07 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Rene Herman
2008-06-23 20:07 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, Rene Herman
2008-06-23 20:24 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Rene Herman
2008-06-23 20:24 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, Rene Herman
2008-06-22 15:43 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Rene Herman
2008-06-22 15:43 ` [lm-sensors] [REGRESSION, ABI] Re: LMSENSORS: 2.6.26-rc, Rene Herman
2008-06-23 10:08 ` LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Jean Delvare
2008-06-23 10:08 ` [lm-sensors] LMSENSORS: 2.6.26-rc, Jean Delvare
2008-06-23 10:24 ` LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Rene Herman
2008-06-23 10:24 ` [lm-sensors] LMSENSORS: 2.6.26-rc, Rene Herman
2008-06-23 11:57 ` LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Jean Delvare
2008-06-23 11:57 ` [lm-sensors] LMSENSORS: 2.6.26-rc, Jean Delvare
2008-06-23 12:35 ` LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Rene Herman
2008-06-23 12:35 ` [lm-sensors] LMSENSORS: 2.6.26-rc, Rene Herman
2008-06-23 13:47 ` LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Jean Delvare
2008-06-23 13:47 ` [lm-sensors] LMSENSORS: 2.6.26-rc, Jean Delvare
2008-06-23 14:06 ` LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Rene Herman
2008-06-23 14:06 ` [lm-sensors] LMSENSORS: 2.6.26-rc, Rene Herman
2008-06-23 14:31 ` LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Matthew Garrett
2008-06-23 14:31 ` [lm-sensors] LMSENSORS: 2.6.26-rc, Matthew Garrett
2008-06-23 17:10 ` LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Rene Herman
2008-06-23 17:10 ` [lm-sensors] LMSENSORS: 2.6.26-rc, Rene Herman
2008-06-23 13:51 ` LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Hans de Goede
2008-06-23 13:51 ` Hans de Goede
2008-06-23 13:51 ` [lm-sensors] LMSENSORS: 2.6.26-rc, Hans de Goede
2008-06-22 7:30 ` Hans de Goede
2008-06-22 7:30 ` [lm-sensors] LMSENSORS: 2.6.26-rc, enabling ACPI Termal Zone support costs sensors Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=485DA11C.7050906@keyaccess.nl \
--to=rene.herman@keyaccess.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=mhoffman@lightlink.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.