* [Xenomai-help] question concerning xeno-test, latency, cyclic
@ 2008-09-03 9:45 juergen.lanner
2008-09-03 9:48 ` Gilles Chanteperdrix
0 siblings, 1 reply; 6+ messages in thread
From: juergen.lanner @ 2008-09-03 9:45 UTC (permalink / raw)
To: xenomai
[-- Attachment #1: Type: text/plain, Size: 11440 bytes --]
Hi!
I set up my box with xenomai 2.4.4 but I doubt that I was fully successful
doing so.
At least I have problems understanding the outputs of the test suite
programs.
running xeno-test I get the following output (see below for full output)
...
something died a 8938 or
something died a 8938 or
...
What does it mean? What might be the problem?
Concerning latency: I get funny values as well:
viper@domain.hid$ latency/run -p500
*
*
* Type ^C to stop this application.
*
*
== Sampling period: 500 us
== Test mode: periodic user-mode task
== All results in microseconds
warming up...
RTT| 00:00:01 (periodic user-mode task, 500 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat
worst
RTD| 29.333| 248.914| 274651.310| 878| 29.333|
274651.310
RTD| 29.333| 166.780| 164809.727| 1426| 29.333|
274651.310
RTD| 29.333| 222.095| 164803.022| 2193| 29.333|
274651.310
RTD| 29.333| 139.123| 109882.649| 2631| 29.333|
274651.310
RTD| 29.333| 304.228| 274651.310| 3729| 29.333|
274651.310
RTD| -470.172| 107252.707| -704900.898| 280993| -470.172|
-704900.898
RTD| 29.333| 358.704| 274651.310| 282310| -470.172|
-704900.898
RTD| 29.333| 386.361| 219726.747| 283737| -470.172|
-704900.898
RTD| 29.333| 139.123| 109885.164| 284175| -470.172|
-704900.898
RTD| 29.333| 139.123| 109882.649| 284613| -470.172|
-704900.898
RTD| 29.333| 358.704| 274651.310| 285930| -470.172|
-704900.898
RTD| 29.333| 194.438| 164803.022| 286588| -470.172|
-704900.898
RTD| 29.333| 414.018| 274652.148| 288125| -470.172|
-704900.898
RTD| 29.333| 331.885| 219726.747| 289332| -470.172|
-704900.898
A max latency of some 100ms seems quite large to me, or am I getting
something wrong?
What do negative values mean here (latency best)?
Running cyclic freezes my box completely:
It gives me some output before.
viper@domain.hid$ cyclic/run -p 80 -t 5 -n
*
*
* Type ^C to stop this application.
*
*
5.16 5.10 4.93 6/193 9476
T: 0 ( 9472) P:80 I: 1000 C: 0 Min: 1000000 Act: 0 Avg:
0 Max:-1000000
T: 1 ( 9473) P:79 I: 1500 C: 0 Min: 1000000 Act: 0 Avg:
0 Max:-1000000
T: 2 ( 9474) P:78 I: 2000 C: 0 Min: 1000000 Act: 0 Avg:
0 Max:-1000000
T: 3 ( 9475) P:77 I: 2500 C: 0 Min: 1000000 Act: 0 Avg:
0 Max:-1000000
T: 4 ( 9476) P:76 I: 3000 C: 0 Min: 1000000 Act: 0 Avg:
0 Max:-1000000
I assume there Is something weird with my setup.
Can you give me some hint where to start searching, please?
Thanks a lot.
Juergen
here is the full output of xeno-test:
xeno-test: started
withBusybox is 0
xeno-test: running tests
Wed Sep 3 11:01:52 CEST 2008
running: /usr/xenomai/bin/xeno-config --verbose
xeno-config --verbose
--version="2.4.4"
--cc="gcc"
--arch="x86"
--prefix="/usr/xenomai"
--xeno-cflags="-I/usr/xenomai/include -D_GNU_SOURCE -D_REENTRANT
-D__XENO__"
--xeno-ldflags="-L/usr/xenomai/lib -lpthread "
--posix-cflags="-I/usr/xenomai/include -I/usr/xenomai/include/posix
-D_GNU_SOURCE -D_REENTRANT -D__XENO__"
--posix-ldflags="-Wl,@/usr/xenomai/lib/posix.wrappers
-L/usr/xenomai/lib -lpthread_rt -lpthread -lrt "
--library-dir="/usr/xenomai/lib"
Wed Sep 3 11:01:52 CEST 2008
running: /usr/xenomai/bin/xeno-info
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux viper5 2.6.25.11-xe #1 SMP Fri Aug 29 07:47:16 CEST 2008 i686
GNU/Linux
Gnu C 4.2.3
Gnu make 3.81
util-linux ng 2.13.1)
mount ng 2.13.1)
module-init-tools 3.3-pre11
e2fsprogs 1.40.8
PPP 2.4.4
Linux C Library > libc.2.7
Dynamic linker (ldd) 2.7
Procps 3.2.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 6.10
Modules Loaded e1000e af_packet rfcomm l2cap bluetooth i915 drm
ppdev ipv6 iptable_filter ip_tables x_tables dm_crypt crypto_blkcipher
dm_mod lp parport_pc parport serio_raw psmouse iTCO_wdt iTCO_vendor_support
shpchp pci_hotplug intel_agp agpgart evdev ext3 jbd mbcache sg sd_mod
pata_jmicron floppy ahci ata_piix ata_generic libata ehci_hcd uhci_hcd skge
scsi_mod usbcore fuse
Wed Sep 3 11:01:54 CEST 2008
running: cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz
stepping : 2
cpu MHz : 1795.536
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm
constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16
xtpr lahf_lm
bogomips : 3593.49
clflush size : 64
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz
stepping : 2
cpu MHz : 1795.536
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm
constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16
xtpr lahf_lm
bogomips : 3591.27
clflush size : 64
Wed Sep 3 11:01:54 CEST 2008
running: md5sum /proc/cpuinfo # cpuinfo fingerprint
16c62e2579214d8da356a8085a11bac1 /proc/cpuinfo
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_IPIPE=y
CONFIG_IPIPE_DOMAINS=4
CONFIG_IPIPE_COMPAT=y
CONFIG_PM=y
CONFIG_PM_LEGACY=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_PM_STD_PARTITION=""
# CONFIG_ACPI is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_IPIPE_DEBUG is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
Wed Sep 3 11:01:55 CEST 2008
running: cat /proc/ipipe/Linux
+----- Handling ([A]ccepted, [G]rabbed, [W]ired, [D]iscarded)
|+---- Sticky
||+--- Locked
|||+-- Exclusive
||||+- Virtual
[IRQ] |||||
0: A....
1: A....
2: A....
3: A.L..
4: A.L..
5: A.L..
6: A....
7: A....
8: A....
9: A....
10: A.L..
11: A....
12: A....
13: A.L..
14: A....
15: A....
16: A....
17: A....
18: A....
19: A....
20: A....
21: A....
22: A....
23: A....
24: A....
25: A....
26: A....
27: A....
28: A....
29: A....
30: A....
31: A....
32: A....
33: A....
34: A....
35: A....
36: A....
37: A....
38: A....
39: A....
40: A....
41: A....
42: A....
43: A....
44: A....
45: A....
46: A....
47: A....
48: A....
49: A....
50: A....
51: A....
52: A....
53: A....
54: A....
55: A....
56: A....
57: A....
58: A....
59: A....
60: A....
61: A....
62: A....
63: A....
64: A....
65: A....
66: A....
67: A....
68: A....
69: A....
70: A....
71: A....
72: A....
73: A....
74: A....
75: A....
76: A....
77: A....
78: A....
79: A....
80: A....
81: A....
82: A....
83: A....
84: A....
85: A....
86: A....
87: A....
88: A....
89: A....
90: A....
91: A....
92: A....
93: A....
94: A....
95: A....
96: A....
97: A....
98: A....
99: A....
100: A....
101: A....
102: A....
103: A....
104: A....
105: A....
106: A....
107: A....
108: A....
109: A....
110: A....
111: A....
112: A....
113: A....
114: A....
115: A....
116: A....
117: A....
118: A....
119: A....
120: A....
121: A....
122: A....
123: A....
124: A....
125: A....
126: A....
127: A....
128: A....
129: A....
130: A....
131: A....
132: A....
133: A....
134: A....
135: A....
136: A....
137: A....
138: A....
139: A....
140: A....
141: A....
142: A....
143: A....
144: A....
145: A....
146: A....
147: A....
148: A....
149: A....
150: A....
151: A....
152: A....
153: A....
154: A....
155: A....
156: A....
157: A....
158: A....
159: A....
160: A....
161: A....
162: A....
163: A....
164: A....
165: A....
166: A....
167: A....
168: A....
169: A....
170: A....
171: A....
172: A....
173: A....
174: A....
175: A....
176: A....
177: A....
178: A....
179: A....
180: A....
181: A....
182: A....
183: A....
184: A....
185: A....
186: A....
187: A....
188: A....
189: A....
190: A....
191: A....
192: A....
193: A....
194: A....
195: A....
196: A....
197: A....
198: A....
199: A....
200: A....
201: A....
202: A....
203: A....
204: A....
205: A....
206: A....
207: A....
208: A....
209: A....
210: A....
211: A....
212: A....
213: A....
214: A....
215: A....
216: A....
217: A....
218: A....
219: A....
220: A....
221: A....
222: A....
223: A....
224: A....
230: A....
231: A....
232: A....
233: A....
234: GS...
236: A....
237: A....
238: A....
239: A....
240: A....
256: G...V
257: G...V
[Domain info]
id=0x00000000
priority=100
Wed Sep 3 11:01:55 CEST 2008
running: cat /proc/ipipe/Xenomai
+----- Handling ([A]ccepted, [G]rabbed, [W]ired, [D]iscarded)
|+---- Sticky
||+--- Locked
|||+-- Exclusive
||||+- Virtual
[IRQ] |||||
230: W....
233: W..X.
234: GS...
258: W...V
[Domain info]
id=0x58454e4f
priority=topmost
Wed Sep 3 11:01:55 CEST 2008
running: cat /proc/ipipe/version
2.0-09
Wed Sep 3 11:01:55 CEST 2008
running: generate_loads 1
dd workload started, pids 8938 stored in /var/lock/xeno-test.8798.pids
8938 pts/4 00:00:00 xeno-test
something died a 8938 or
something died a 8938 or
something died a 8938 or
something died a 8938 or
something died a 8938 or
something died a 8938 or
something died a 8938 or
something died a 8938 or
something died a 8938 or
something died a 8938 or
something died a 8938 or
^C
[-- Attachment #2: Type: text/html, Size: 25034 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Xenomai-help] question concerning xeno-test, latency, cyclic
2008-09-03 9:45 [Xenomai-help] question concerning xeno-test, latency, cyclic juergen.lanner
@ 2008-09-03 9:48 ` Gilles Chanteperdrix
2008-09-03 12:59 ` Gilles Chanteperdrix
2008-09-03 13:00 ` Gilles Chanteperdrix
0 siblings, 2 replies; 6+ messages in thread
From: Gilles Chanteperdrix @ 2008-09-03 9:48 UTC (permalink / raw)
To: juergen.lanner; +Cc: xenomai
juergen.lanner@domain.hid wrote:
>
> Hi!
>
> I set up my box with xenomai 2.4.4 but I doubt that I was fully successful
> doing so.
> At least I have problems understanding the outputs of the test suite
> programs.
>
> running xeno-test I get the following output (see below for full output)
> ...
> something died a 8938 or
> something died a 8938 or
> ...
> What does it mean? What might be the problem?
>
> Concerning latency: I get funny values as well:
> viper@domain.hid$ latency/run -p500
Please install the latest release.
Read the TROUBLESHOOTING guide.
--
Gilles.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Xenomai-help] question concerning xeno-test, latency, cyclic
2008-09-03 9:48 ` Gilles Chanteperdrix
@ 2008-09-03 12:59 ` Gilles Chanteperdrix
2008-09-03 13:00 ` Gilles Chanteperdrix
1 sibling, 0 replies; 6+ messages in thread
From: Gilles Chanteperdrix @ 2008-09-03 12:59 UTC (permalink / raw)
To: juergen.lanner; +Cc: xenomai
Gilles Chanteperdrix wrote:
> juergen.lanner@domain.hid wrote:
>> Hi!
>>
>> I set up my box with xenomai 2.4.4 but I doubt that I was fully successful
>> doing so.
>> At least I have problems understanding the outputs of the test suite
>> programs.
>>
>> running xeno-test I get the following output (see below for full output)
>> ...
>> something died a 8938 or
>> something died a 8938 or
>> ...
>> What does it mean? What might be the problem?
>>
>> Concerning latency: I get funny values as well:
>> viper@domain.hid$ latency/run -p500
>
> Please install the latest release.
> Read the TROUBLESHOOTING guide.
Maybe we should update our TROUBLESHOOTING guide and FAQ: there is a new
option that should be avoided IMO: CONFIG_CPU_IDLE.
--
Gilles.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Xenomai-help] question concerning xeno-test, latency, cyclic
2008-09-03 9:48 ` Gilles Chanteperdrix
2008-09-03 12:59 ` Gilles Chanteperdrix
@ 2008-09-03 13:00 ` Gilles Chanteperdrix
1 sibling, 0 replies; 6+ messages in thread
From: Gilles Chanteperdrix @ 2008-09-03 13:00 UTC (permalink / raw)
To: juergen.lanner; +Cc: xenomai
Gilles Chanteperdrix wrote:
> juergen.lanner@domain.hid wrote:
>> Hi!
>>
>> I set up my box with xenomai 2.4.4 but I doubt that I was fully successful
>> doing so.
>> At least I have problems understanding the outputs of the test suite
>> programs.
>>
>> running xeno-test I get the following output (see below for full output)
>> ...
>> something died a 8938 or
>> something died a 8938 or
>> ...
>> What does it mean? What might be the problem?
>>
>> Concerning latency: I get funny values as well:
>> viper@domain.hid$ latency/run -p500
>
> Please install the latest release.
> Read the TROUBLESHOOTING guide.
Maybe we should update our TROUBLESHOOTING guide and FAQ: there is a new
option that should be avoided IMO: CONFIG_CPU_IDLE.
And by the way, configuring the kernel without CONFIG_ACPI is not a good
idea. The only dangerous option in ACPI is CONFIG_ACPI_PROCESSOR.
--
Gilles.
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Xenomai-help] question concerning xeno-test, latency, cyclic
@ 2008-10-08 5:44 juergen.lanner
2008-10-08 7:08 ` Gilles Chanteperdrix
0 siblings, 1 reply; 6+ messages in thread
From: juergen.lanner @ 2008-10-08 5:44 UTC (permalink / raw)
To: xenomai
[-- Attachment #1: Type: text/plain, Size: 10199 bytes --]
We now found the reason for the really huge values and the complete hangup:
I am using a core 2 processor but didn't set the processor type within the
kernel configuration correctly.
Now I get good results again.
Regards
juergen
Posted by juergen . lanner on September 03, 2008 - 11:45:
Hi!
I set up my box with xenomai 2.4.4 but I doubt that I was fully successful
doing so.
At least I have problems understanding the outputs of the test suite
programs.
running xeno-test I get the following output (see below for full output)
...
something died a 8938 or
something died a 8938 or
...
What does it mean? What might be the problem?
Concerning latency: I get funny values as well:
viper@domain.hid$ latency/run -p500
*
*
* Type ^C to stop this application.
*
*
== Sampling period: 500 us
== Test mode: periodic user-mode task
== All results in microseconds
warming up...
RTT| 00:00:01 (periodic user-mode task, 500 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat
worst
RTD| 29.333| 248.914| 274651.310| 878| 29.333| 274651.310
RTD| 29.333| 166.780| 164809.727| 1426| 29.333| 274651.310
RTD| 29.333| 222.095| 164803.022| 2193| 29.333| 274651.310
RTD| 29.333| 139.123| 109882.649| 2631| 29.333| 274651.310
RTD| 29.333| 304.228| 274651.310| 3729| 29.333| 274651.310
RTD| -470.172| 107252.707| -704900.898| 280993| -470.172| -704900.898
RTD| 29.333| 358.704| 274651.310| 282310| -470.172| -704900.898
RTD| 29.333| 386.361| 219726.747| 283737| -470.172| -704900.898
RTD| 29.333| 139.123| 109885.164| 284175| -470.172| -704900.898
RTD| 29.333| 139.123| 109882.649| 284613| -470.172| -704900.898
RTD| 29.333| 358.704| 274651.310| 285930| -470.172| -704900.898
RTD| 29.333| 194.438| 164803.022| 286588| -470.172| -704900.898
RTD| 29.333| 414.018| 274652.148| 288125| -470.172| -704900.898
RTD| 29.333| 331.885| 219726.747| 289332| -470.172| -704900.898
A max latency of some 100ms seems quite large to me, or am I getting
something wrong?
What do negative values mean here (latency best)?
Running cyclic freezes my box completely:
It gives me some output before.
viper@domain.hid$ cyclic/run -p 80 -t 5 -n
*
*
* Type ^C to stop this application.
*
*
5.16 5.10 4.93 6/193 9476
T: 0 ( 9472) P:80 I: 1000 C: 0 Min: 1000000 Act: 0 Avg: 0 Max:-1000000
T: 1 ( 9473) P:79 I: 1500 C: 0 Min: 1000000 Act: 0 Avg: 0 Max:-1000000
T: 2 ( 9474) P:78 I: 2000 C: 0 Min: 1000000 Act: 0 Avg: 0 Max:-1000000
T: 3 ( 9475) P:77 I: 2500 C: 0 Min: 1000000 Act: 0 Avg: 0 Max:-1000000
T: 4 ( 9476) P:76 I: 3000 C: 0 Min: 1000000 Act: 0 Avg: 0 Max:-1000000
I assume there Is something weird with my setup.
Can you give me some hint where to start searching, please?
Thanks a lot.
Juergen
here is the full output of xeno-test:
xeno-test: started
withBusybox is 0
xeno-test: running tests
Wed Sep 3 11:01:52 CEST 2008
running: /usr/xenomai/bin/xeno-config --verbose
xeno-config --verbose
--version="2.4.4"
--cc="gcc"
--arch="x86"
--prefix="/usr/xenomai"
--xeno-cflags="-I/usr/xenomai/include -D_GNU_SOURCE -D_REENTRANT
-D__XENO__"
--xeno-ldflags="-L/usr/xenomai/lib -lpthread "
--posix-cflags="-I/usr/xenomai/include -I/usr/xenomai/include/posix
-D_GNU_SOURCE -D_REENTRANT -D__XENO__"
--posix-ldflags="-Wl,@/usr/xenomai/lib/posix.wrappers -L/usr/xenomai/lib
-lpthread_rt -lpthread -lrt "
--library-dir="/usr/xenomai/lib"
Wed Sep 3 11:01:52 CEST 2008
running: /usr/xenomai/bin/xeno-info
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux viper5 2.6.25.11-xe #1 SMP Fri Aug 29 07:47:16 CEST 2008 i686
GNU/Linux
Gnu C 4.2.3
Gnu make 3.81
util-linux ng 2.13.1)
mount ng 2.13.1)
module-init-tools 3.3-pre11
e2fsprogs 1.40.8
PPP 2.4.4
Linux C Library > libc.2.7
Dynamic linker (ldd) 2.7
Procps 3.2.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 6.10
Modules Loaded e1000e af_packet rfcomm l2cap bluetooth i915 drm ppdev ipv6
iptable_filter ip_tables x_tables dm_crypt crypto_blkcipher dm_mod lp
parport_pc parport serio_raw psmouse iTCO_wdt iTCO_vendor_support shpchp
pci_hotplug intel_agp agpgart evdev ext3 jbd mbcache sg sd_mod pata_jmicron
floppy ahci ata_piix ata_generic libata ehci_hcd uhci_hcd skge scsi_mod
usbcore fuse
Wed Sep 3 11:01:54 CEST 2008
running: cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz
stepping : 2
cpu MHz : 1795.536
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc
arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 3593.49
clflush size : 64
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz
stepping : 2
cpu MHz : 1795.536
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc
arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 3591.27
clflush size : 64
Wed Sep 3 11:01:54 CEST 2008
running: md5sum /proc/cpuinfo # cpuinfo fingerprint
16c62e2579214d8da356a8085a11bac1 /proc/cpuinfo
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_IPIPE=y
CONFIG_IPIPE_DOMAINS=4
CONFIG_IPIPE_COMPAT=y
CONFIG_PM=y
CONFIG_PM_LEGACY=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_PM_STD_PARTITION=""
# CONFIG_ACPI is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_IPIPE_DEBUG is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
Wed Sep 3 11:01:55 CEST 2008
running: cat /proc/ipipe/Linux
+----- Handling ([A]ccepted, [G]rabbed, [W]ired, [D]iscarded)
|+---- Sticky
||+--- Locked
|||+-- Exclusive
||||+- Virtual
[IRQ] |||||
0: A....
1: A....
2: A....
3: A.L..
4: A.L..
5: A.L..
6: A....
7: A....
8: A....
9: A....
10: A.L..
11: A....
12: A....
13: A.L..
14: A....
15: A....
16: A....
17: A....
18: A....
19: A....
20: A....
21: A....
22: A....
23: A....
24: A....
25: A....
26: A....
27: A....
28: A....
29: A....
30: A....
31: A....
32: A....
33: A....
34: A....
35: A....
36: A....
37: A....
38: A....
39: A....
40: A....
41: A....
42: A....
43: A....
44: A....
45: A....
46: A....
47: A....
48: A....
49: A....
50: A....
51: A....
52: A....
53: A....
54: A....
55: A....
56: A....
57: A....
58: A....
59: A....
60: A....
61: A....
62: A....
63: A....
64: A....
65: A....
66: A....
67: A....
68: A....
69: A....
70: A....
71: A....
72: A....
73: A....
74: A....
75: A....
76: A....
77: A....
78: A....
79: A....
80: A....
81: A....
82: A....
83: A....
84: A....
85: A....
86: A....
87: A....
88: A....
89: A....
90: A....
91: A....
92: A....
93: A....
94: A....
95: A....
96: A....
97: A....
98: A....
99: A....
100: A....
101: A....
102: A....
103: A....
104: A....
105: A....
106: A....
107: A....
108: A....
109: A....
110: A....
111: A....
112: A....
113: A....
114: A....
115: A....
116: A....
117: A....
118: A....
119: A....
120: A....
121: A....
122: A....
123: A....
124: A....
125: A....
126: A....
127: A....
128: A....
129: A....
130: A....
131: A....
132: A....
133: A....
134: A....
135: A....
136: A....
137: A....
138: A....
139: A....
140: A....
141: A....
142: A....
143: A....
144: A....
145: A....
146: A....
147: A....
148: A....
149: A....
150: A....
151: A....
152: A....
153: A....
154: A....
155: A....
156: A....
157: A....
158: A....
159: A....
160: A....
161: A....
162: A....
163: A....
164: A....
165: A....
166: A....
167: A....
168: A....
169: A....
170: A....
171: A....
172: A....
173: A....
174: A....
175: A....
176: A....
177: A....
178: A....
179: A....
180: A....
181: A....
182: A....
183: A....
184: A....
185: A....
186: A....
187: A....
188: A....
189: A....
190: A....
191: A....
192: A....
193: A....
194: A....
195: A....
196: A....
197: A....
198: A....
199: A....
200: A....
201: A....
202: A....
203: A....
204: A....
205: A....
206: A....
207: A....
208: A....
209: A....
210: A....
211: A....
212: A....
213: A....
214: A....
215: A....
216: A....
217: A....
218: A....
219: A....
220: A....
221: A....
222: A....
223: A....
224: A....
230: A....
231: A....
232: A....
233: A....
234: GS...
236: A....
237: A....
238: A....
239: A....
240: A....
256: G...V
257: G...V
[Domain info]
id=0x00000000
priority=100
Wed Sep 3 11:01:55 CEST 2008
running: cat /proc/ipipe/Xenomai
+----- Handling ([A]ccepted, [G]rabbed, [W]ired, [D]iscarded)
|+---- Sticky
||+--- Locked
|||+-- Exclusive
||||+- Virtual
[IRQ] |||||
230: W....
233: W..X.
234: GS...
258: W...V
[Domain info]
id=0x58454e4f
priority=topmost
Wed Sep 3 11:01:55 CEST 2008
running: cat /proc/ipipe/version
2.0-09
Wed Sep 3 11:01:55 CEST 2008
running: generate_loads 1
dd workload started, pids 8938 stored in /var/lock/xeno-test.8798.pids
8938 pts/4 00:00:00 xeno-test
something died a 8938 or
something died a 8938 or
something died a 8938 or
something died a 8938 or
something died a 8938 or
something died a 8938 or
something died a 8938 or
something died a 8938 or
something died a 8938 or
something died a 8938 or
something died a 8938 or
^C
[-- Attachment #2: Type: text/html, Size: 13807 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Xenomai-help] question concerning xeno-test, latency, cyclic
2008-10-08 5:44 juergen.lanner
@ 2008-10-08 7:08 ` Gilles Chanteperdrix
0 siblings, 0 replies; 6+ messages in thread
From: Gilles Chanteperdrix @ 2008-10-08 7:08 UTC (permalink / raw)
To: juergen.lanner; +Cc: xenomai
juergen.lanner@domain.hid wrote:
> Wed Sep 3 11:01:54 CEST 2008
> running: md5sum /proc/cpuinfo # cpuinfo fingerprint
> 16c62e2579214d8da356a8085a11bac1 /proc/cpuinfo
> CONFIG_PREEMPT_NOTIFIERS=y
> # CONFIG_PREEMPT_NONE is not set
> CONFIG_PREEMPT_VOLUNTARY=y
> # CONFIG_PREEMPT is not set
> CONFIG_IPIPE=y
> CONFIG_IPIPE_DOMAINS=4
> CONFIG_IPIPE_COMPAT=y
> CONFIG_PM=y
> CONFIG_PM_LEGACY=y
You should disable PM and PM_LEGACY.
> CONFIG_PM_DEBUG=y
> # CONFIG_PM_VERBOSE is not set
> # CONFIG_PM_TRACE_RTC is not set
> CONFIG_PM_SLEEP_SMP=y
Give its name, you should really disable PM_SLEEP_SMP
> CONFIG_PM_SLEEP=y
> CONFIG_PM_STD_PARTITION=""
> # CONFIG_ACPI is not set
You should enable ACPI (but not ACPI_PROCESSOR)
> # CONFIG_CPU_FREQ is not set
> # CONFIG_IPIPE_DEBUG is not set
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
--
Gilles.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2008-10-08 7:08 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-09-03 9:45 [Xenomai-help] question concerning xeno-test, latency, cyclic juergen.lanner
2008-09-03 9:48 ` Gilles Chanteperdrix
2008-09-03 12:59 ` Gilles Chanteperdrix
2008-09-03 13:00 ` Gilles Chanteperdrix
-- strict thread matches above, loose matches on Subject: below --
2008-10-08 5:44 juergen.lanner
2008-10-08 7:08 ` Gilles Chanteperdrix
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.