Re: [Printing-architecture] Slides for GSoC report on the PWG Meetingin October

Re: [Printing-architecture] Slides for GSoC report on the PWG Meetingin October

[Petrie, Glen]

Thanks Till,

I will review the slides today and if I have any question I will send an
email.

Can you provide a slide or two on what OpenPrinting related content that
will be in the various releases of LSB and what time frame.  One thing I
believe that PWG would be interested in is the "how".  "How" did
OpenPrinting go from creating the spec to getting it in an LSB release.
Has the LSB expressed any needs or things that OpenPrinting needs to
address?

Since you are a major driving force in OpenPrinting today, can you
create a slide on what you see as the next things to address; what
specifications are needed, what application code development is needed,
what GSoC projects are needed for next year.

gwp
============

Ira,

Can you provide a few introductory / general overlview slides on who is
working on OpenPrinting and what is currently going on? 

gwp
============

Toratani

Can you provide overview slides on what "has, is and will" be going on
with OpenPrinting Japan.  Personally, I am really interested in future
activities and who is still involved in OpenPrinting Japan.

gwp

========================================================================
=
========================================================================
=
========================================================================
=
> -----Original Message-----
> From: printing-architecture-bounces@lists.linux-foundation.org
> [mailto:printing-architecture-bounces@lists.linux-foundation.org] On
> Behalf Of Till Kamppeter
> Sent: Friday, September 19, 2008 2:23 AM
> To: printing-architecture@lists.linux-foundation.org
> Subject: [Printing-architecture] Slides for GSoC report on the PWG
> Meetingin October
> 
> Hi,
> 
> attached are the slides for the GSoC results presentation, as we
talked
> about on the last OP Steering Committee Meeting. For each of the 4
> projects I have made one main slide and one slide with extra info. For
> the printing dialog I have also added a screenshot (will most probably
> get updated until the meeting).
> 
> Norm, can you finish the slides about the PAPI implementation? Thanks.
> 
>     Till

Re: [Printing-architecture] Slides for GSoC report on the PWG Meetingin October

[TORATANI Yasumasa]

Hi Glen,

On Fri, 19 Sep 2008 07:56:24 -0700
"Petrie, Glen" <glen.petrie@eitc.epson.com> wrote:

(snip)

> ============
> 
> Toratani
> 
> Can you provide overview slides on what "has, is and will" be going on
> with OpenPrinting Japan.  Personally, I am really interested in future
> activities and who is still involved in OpenPrinting Japan.

Yes, but when I should prepare the slides?

I need a time to confirm the slide contents with OpenPrinting
Japan members, and it will finish by the end of this week.

Regards,
TORATANI

Re: [Printing-architecture] Slides for GSoC report on the PWG Meetingin October

[Till Kamppeter]

[-- Attachment #1: Type: text/plain, Size: 1071 bytes --]

Petrie, Glen wrote:
> Thanks Till,
> 
> I will review the slides today and if I have any question I will send an
> email.
> 
> Can you provide a slide or two on what OpenPrinting related content that
> will be in the various releases of LSB and what time frame.  One thing I
> believe that PWG would be interested in is the "how".  "How" did
> OpenPrinting go from creating the spec to getting it in an LSB release.
> Has the LSB expressed any needs or things that OpenPrinting needs to
> address?
>

The slides are attached, as OOo source and PDF. It started in 2006, on 
the Printing Summit in Atlanta, when we discussed about how printer 
manufacturers could supply Linux drivers. Shortly after the Summit I 
brought it in on the LSB workgroup meeting in Boston.

> Since you are a major driving force in OpenPrinting today, can you
> create a slide on what you see as the next things to address; what
> specifications are needed, what application code development is needed,
> what GSoC projects are needed for next year.

Slides attached, ideas welcome.

    Till



[-- Attachment #2: lsb-openprinting.odp --]
[-- Type: application/vnd.oasis.opendocument.presentation, Size: 50845 bytes --]

[-- Attachment #3: lsb-openprinting.pdf --]
[-- Type: application/pdf, Size: 187312 bytes --]

[-- Attachment #4: future-openprinting.odp --]
[-- Type: application/vnd.oasis.opendocument.presentation, Size: 49933 bytes --]

[-- Attachment #5: future-openprinting.pdf --]
[-- Type: application/pdf, Size: 181299 bytes --]

Re: [Printing-architecture] Slides for GSoC report on the PWG Meetingin October

[Till Kamppeter]

Forgot some links. Here we go:

Printing in the LSB:
http://refspecs.linux-foundation.org/LSB_3.2.0/LSB-Printing/LSB-Printing/book1.html
http://refspecs.linux-foundation.org/LSB_3.2.0/LSB-Printing/LSB-Printing.pdf
https://www.linuxfoundation.org/en/ProjectPlan40
https://www.linuxfoundation.org/en/CUPS40
https://www.linuxfoundation.org/en/SANE40

LSB DDK and distro-independent driver packages:
https://www.linuxfoundation.org/images/8/84/Distro-Independent-Packages-Tokyo-July-2008.pdf
https://www.linuxfoundation.org/en/OpenPrinting/WritingAndPackagingPrinterDrivers

Announcement of Jockey 0.5beta1 release and introduction of driver 
download support in system-config-printer on the LF Driver Backports 
mailing list:
https://lists.linux-foundation.org/pipermail/lf_driver_backport/2008-September/000642.html
https://lists.linux-foundation.org/pipermail/lf_driver_backport/2008-September/000643.html

Printer driver auto download implementation in with 
system-config-printer and Jockey in Ubuntu Linux:
https://blueprints.edge.launchpad.net/ubuntu/+spec/printerdriverautodownload
https://blueprints.edge.launchpad.net/ubuntu/+spec/jockey-printer-driver-support

    Till


Till Kamppeter wrote:
> Petrie, Glen wrote:
>> Thanks Till,
>>
>> I will review the slides today and if I have any question I will send an
>> email.
>>
>> Can you provide a slide or two on what OpenPrinting related content that
>> will be in the various releases of LSB and what time frame.  One thing I
>> believe that PWG would be interested in is the "how".  "How" did
>> OpenPrinting go from creating the spec to getting it in an LSB release.
>> Has the LSB expressed any needs or things that OpenPrinting needs to
>> address?
>>
> 
> The slides are attached, as OOo source and PDF. It started in 2006, on 
> the Printing Summit in Atlanta, when we discussed about how printer 
> manufacturers could supply Linux drivers. Shortly after the Summit I 
> brought it in on the LSB workgroup meeting in Boston.
> 
>> Since you are a major driving force in OpenPrinting today, can you
>> create a slide on what you see as the next things to address; what
>> specifications are needed, what application code development is needed,
>> what GSoC projects are needed for next year.
> 
> Slides attached, ideas welcome.
> 
>    Till
> 
> 

Re: [Printing-architecture] Slides for GSoC report on the PWG Meetingin October

[Olaf Meeuwissen]

Till Kamppeter <till.kamppeter@gmail.com> writes:

> The slides are attached, as OOo source and PDF. It started in 2006, on
> the Printing Summit in Atlanta, when we discussed about how printer
> manufacturers could supply Linux drivers. Shortly after the Summit I
> brought it in on the LSB workgroup meeting in Boston.

Some minor typo corrections,

  lsb-openprinting.odp

  slide 2: s/Vectoe/Vector/

  future-openprinting.odb

  slide 2: s/Uis/UIs/

Then a question.  Is the SANE API really slated for inclusion in
LSB-4.0?  I've seen only very minimal discussion on the lsb-discuss
list.

Hope this helps,
-- 
Olaf Meeuwissen, LPIC-2           FLOSS Engineer -- AVASYS Corporation
FSF Associate Member #1962               Help support software freedom
                 http://www.fsf.org/jf?referrer=1962

Re: [Printing-architecture] Slides for GSoC report on the PWG Meetingin October

[Till Kamppeter]

Olaf Meeuwissen wrote:
> Some minor typo corrections,
> 
>   lsb-openprinting.odp
> 
>   slide 2: s/Vectoe/Vector/
> 
>   future-openprinting.odb
> 
>   slide 2: s/Uis/UIs/
> 
> Then a question.  Is the SANE API really slated for inclusion in
> LSB-4.0?  I've seen only very minimal discussion on the lsb-discuss
> list.
> 
> Hope this helps,

The problem is the missing manpower for writing specs and test suites.

As the printer manufacturers benefit most from these new requirements, I 
think the best is to ask them for help.

Olaf, would you, or someone of your co-workers at Avasys help here?

    Till

Re: [Printing-architecture] Slides for GSoC report on the PWG Meetingin October

[Olaf Meeuwissen]

Till Kamppeter <till.kamppeter@gmail.com> writes:

> Olaf Meeuwissen wrote:
>> [snip]
>> Then a question.  Is the SANE API really slated for inclusion in
>> LSB-4.0?  I've seen only very minimal discussion on the lsb-discuss
>> list.
>
> The problem is the missing manpower for writing specs and test suites.

Could you be more specific about:

 - what kind of specs are required
 - what kind of test suites are required
 - how much time is approximately needed for each of these
 - the process involved to contribute these

That would make it easier for me to see if/when/where I can provide
some sorely missing manpower ;-)

> As the printer manufacturers benefit most from these new requirements,
> I think the best is to ask them for help.
>
> Olaf, would you, or someone of your co-workers at Avasys help here?

I would like to help but it doesn't look like I'll be having any time
until around the end of October (and even after that I'm not so sure
I'll be having a lot of time).

Hope this helps,
-- 
Olaf Meeuwissen, LPIC-2           FLOSS Engineer -- AVASYS Corporation
FSF Associate Member #1962               Help support software freedom
                 http://www.fsf.org/jf?referrer=1962

Re: [Printing-architecture] Slides for GSoC report on the PWG Meetingin October

[Till Kamppeter]

Olaf Meeuwissen wrote:
> Till Kamppeter <till.kamppeter@gmail.com> writes:
> 
>> Olaf Meeuwissen wrote:
>>> [snip]
>>> Then a question.  Is the SANE API really slated for inclusion in
>>> LSB-4.0?  I've seen only very minimal discussion on the lsb-discuss
>>> list.
>> The problem is the missing manpower for writing specs and test suites.
> 
> Could you be more specific about:
> 
>  - what kind of specs are required
>  - what kind of test suites are required
>  - how much time is approximately needed for each of these
>  - the process involved to contribute these
>

Can someone of the LSB work group help Olaf here and post appropriate 
documentation links, explain what to do, ...


> That would make it easier for me to see if/when/where I can provide
> some sorely missing manpower ;-)
> 
>> As the printer manufacturers benefit most from these new requirements,
>> I think the best is to ask them for help.
>>
>> Olaf, would you, or someone of your co-workers at Avasys help here?
> 
> I would like to help but it doesn't look like I'll be having any time
> until around the end of October (and even after that I'm not so sure
> I'll be having a lot of time).

LSB developers, what are the time frames for finishing specs and test 
suites. Are they different for SANE, as SANE is planned to get into the 
trial use category?

    Till

Re: [Printing-architecture] [lsb-discuss] Slides for GSoC report on the PWG Meetingin October

[Olaf Meeuwissen]

Hi Stew,

Stew Benedict <stewb@linux-foundation.org> writes:

> On Tue, 30 Sep 2008, Till Kamppeter wrote:
>
>> Olaf Meeuwissen wrote:
>> > Till Kamppeter <till.kamppeter@gmail.com> writes:
>> > 
>> >> Olaf Meeuwissen wrote:
>> >>> [snip]
>> >>> Then a question.  Is the SANE API really slated for inclusion in
>> >>> LSB-4.0?  I've seen only very minimal discussion on the lsb-discuss
>> >>> list.
>> >> The problem is the missing manpower for writing specs and test suites.
>> > 
>> > Could you be more specific about:
>> > 
>> >  - what kind of specs are required
>> >  - what kind of test suites are required
>> >  - how much time is approximately needed for each of these
>> >  - the process involved to contribute these
>> 
>> Can someone of the LSB work group help Olaf here and post appropriate 
>> documentation links, explain what to do, ...
>
> I'll try to give some input.  There are a number of steps:

Thanks for the input.

> 1) import of the sane interfaces into the database
>
> I did a first pass try of this a while back, and things appeared to mostly 
> come out right.
>
> ref:
>
> https://www.linuxfoundation.org/en/SANE40
> http://www.linuxfoundation.org/en/LibToLSB (import part is obsolete)
> http://ispras.linux-foundation.org/index.php/LSB_Library_Import_Tools

Had a quick glance through these but I need more time (which I don't
really have right now) to understand what the latter two are talking
about.  I'll see if I can find some time to update the SANE40 page.

> 2) writing/integrating of specs
>
> If upstream specs are adequate, then this piece can be a fairly small 
> amount of work, basically a pointer to the upstream (preferable a static 
> copy we can be assured will remain where it is and unchanged). Then of 
> course the sane spec would need to be integrated into the spec as a whole.
>
> Ref #2 above has some info on spec writing. I think Ron has created some 
> better references.

I'll check about the pointer to the upstream spec and static copy bit.

> 3) writing/integrating tests
>
> We have a number of test technologies we use.  I'm most familiar with 
> either adapting upstream's unit tests into something we can use, or the 
> classic tet-style tests like lsb-test-core or the cups portion of the 
> printing tests use. There are also new test frameworks which our 
> colleagues at ISP/RAS are most familiar with.

I have some experience with check and CxxTest, but don't mind learning
another test framework if needed.  There are `test` and `tstbackend`
SANE "frontends" that may be usable for testing purposes.

> Ref #2 has some info on writing tests. The printing/cups tests are in bzr 
> here:
>
> http://bzr.linux-foundation.org/lsb/devel/printing-test?cmd=inventory;rev=mats%40freestandards.org-20080930053543-wj9dlz85w23vsv4b;path=sources/printing-test/
>
> See convenience, ppd, raster

Will take a look.

> Writing the tests isn't usually a huge task, if we're still talking about 
> 14 interfaces. Testing them and bugfixing across a number of distributions 
> can be time consuming.

The SANE specification only lists 14 interfaces but to be of any use
(with the SANE dll backend) every backend (needs to) export a "copy"
of each of these interfaces.  Doing so is quite simple but the tests
probably need to take that requirement into account.

>> > That would make it easier for me to see  if/when/where I can provide
>> > some sorely missing manpower ;-)
>> > 
>> >> As the printer manufacturers benefit most from these new requirements,
>> >> I think the best is to ask them for help.
>> >>
>> >> Olaf, would you, or someone of your co-workers at Avasys help here?
>> > 
>> > I would like to help but it doesn't look like I'll be having any time
>> > until around the end of October (and even after that I'm not so sure
>> > I'll be having a lot of time).
>> 
>> LSB developers, what are the time frames for finishing specs and test 
>> suites. Are they different for SANE, as SANE is planned to get into the 
>> trial use category?
>
> I could be mistaken, but I think we pretty much took sane off the table 
> when we hit the feature freeze point and we hadn't yet made much progress 
> with it, but I by no means have the final say. Beta release of 4.0 is 
> supposed to be happening this week.

Hope this helps,
-- 
Olaf Meeuwissen, LPIC-2           FLOSS Engineer -- AVASYS Corporation
FSF Associate Member #1962               Help support software freedom
                 http://www.fsf.org/jf?referrer=1962

Re: [Printing-architecture] Slides for GSoC report on the PWG Meetingin October

[Petrie, Glen]

The presentation is not until Oct 21-23.  So end of this week is fine
and, that, still gives lots of time for questions and feedback.

gwp

> -----Original Message-----
> From: TORATANI Yasumasa [mailto:toratani.yasumasa@canon.co.jp]
> Sent: Monday, September 22, 2008 3:19 AM
> To: Petrie, Glen
> Cc: Till Kamppeter; printing-architecture@lists.linux-foundation.org
> Subject: Re: [Printing-architecture] Slides for GSoC report on the PWG
> Meetingin October
> 
> Hi Glen,
> 
> On Fri, 19 Sep 2008 07:56:24 -0700
> "Petrie, Glen" <glen.petrie@eitc.epson.com> wrote:
> 
> (snip)
> 
> > ============
> >
> > Toratani
> >
> > Can you provide overview slides on what "has, is and will" be going
on
> > with OpenPrinting Japan.  Personally, I am really interested in
future
> > activities and who is still involved in OpenPrinting Japan.
> 
> Yes, but when I should prepare the slides?
> 
> I need a time to confirm the slide contents with OpenPrinting
> Japan members, and it will finish by the end of this week.
> 
> Regards,
> TORATANI
> 

Re: [Printing-architecture] Slides for GSoC report on the PWG Meetingin October

[TORATANI Yasumasa]

Hi Glen,

Please wait for a few days to confirm the context of the
Japan region activity slides.

Regards,
TORATANI

On Mon, 22 Sep 2008 07:17:53 -0700
"Petrie, Glen" <glen.petrie@eitc.epson.com> wrote:

> The presentation is not until Oct 21-23.  So end of this week is fine
> and, that, still gives lots of time for questions and feedback.
> 
> gwp
> 
> > -----Original Message-----
> > From: TORATANI Yasumasa [mailto:toratani.yasumasa@canon.co.jp]
> > Sent: Monday, September 22, 2008 3:19 AM
> > To: Petrie, Glen
> > Cc: Till Kamppeter; printing-architecture@lists.linux-foundation.org
> > Subject: Re: [Printing-architecture] Slides for GSoC report on the PWG
> > Meetingin October
> > 
> > Hi Glen,
> > 
> > On Fri, 19 Sep 2008 07:56:24 -0700
> > "Petrie, Glen" <glen.petrie@eitc.epson.com> wrote:
> > 
> > (snip)
> > 
> > > ============
> > >
> > > Toratani
> > >
> > > Can you provide overview slides on what "has, is and will" be going
> on
> > > with OpenPrinting Japan.  Personally, I am really interested in
> future
> > > activities and who is still involved in OpenPrinting Japan.
> > 
> > Yes, but when I should prepare the slides?
> > 
> > I need a time to confirm the slide contents with OpenPrinting
> > Japan members, and it will finish by the end of this week.
> > 
> > Regards,
> > TORATANI
> > 
> 
> _______________________________________________
> Printing-architecture mailing list
> Printing-architecture@lists.linux-foundation.org
> https://lists.linux-foundation.org/mailman/listinfo/printing-architecture

-----------------------------------------
TORATANI Yasumasa
Software Platform Technology Development Dept. 33
Digital Platform Technology Development HQs, CANON INC.

Re: [Printing-architecture] Slides for GSoC report on the PWG Meetingin October

[henri]

Hi I work with Lucid Information and will be in Japan from the 21st of  
October 2008.

I am currently planning to leave New Zealand on the 20th of September.  
The ticket is still wait listed.
I would be interested in attending the presentation. This is primarily  
due to my involvement with PrintingWorks.

More details on PrintingWorks is available from the following URL : http://www.lucidsystems.org/printingworks/

I am looking forward to meeting with you.


On 23/09/2008, at 2:17 AM, Petrie, Glen wrote:

> The presentation is not until Oct 21-23.  So end of this week is fine
> and, that, still gives lots of time for questions and feedback.
>
> gwp
>
> > -----Original Message-----
> > From: TORATANI Yasumasa [mailto:toratani.yasumasa@canon.co.jp]
> > Sent: Monday, September 22, 2008 3:19 AM
> > To: Petrie, Glen
> > Cc: Till Kamppeter; printing-architecture@lists.linux-foundation.org
> > Subject: Re: [Printing-architecture] Slides for GSoC report on the  
> PWG
> > Meetingin October
> >
> > Hi Glen,
> >
> > On Fri, 19 Sep 2008 07:56:24 -0700
> > "Petrie, Glen" <glen.petrie@eitc.epson.com> wrote:
> >
> > (snip)
> >
> > > ============
> > >
> > > Toratani
> > >
> > > Can you provide overview slides on what "has, is and will" be  
> going
> on
> > > with OpenPrinting Japan.  Personally, I am really interested in
> future
> > > activities and who is still involved in OpenPrinting Japan.
> >
> > Yes, but when I should prepare the slides?
> >
> > I need a time to confirm the slide contents with OpenPrinting
> > Japan members, and it will finish by the end of this week.
> >
> > Regards,
> > TORATANI
> >
>
> _______________________________________________
> Printing-architecture mailing list
> Printing-architecture@lists.linux-foundation.org
> https://lists.linux-foundation.org/mailman/listinfo/printing-architecture

Re: [Printing-architecture] Slides for GSoC report on the PWG Meetingin October

[Ira McDonald]

Hi Henri,

Actually, this presentation will be in the USA, at the next IEEE-ISTO
Printing Working Group standards meeting in Lexington, Kentucky,
on Tuesday 21 October.

  http://www.pwg.org/chair/meeting-info/October_2008_Lexington.html

Perhaps you can meet with some of the LF Open Printing Japan
active participants while you are in Japan next month.

Toratani-san - could you try to arrange meeting with Henri?

Cheers,
- Ira


-- 
Ira McDonald (Musician / Software Architect)
Chair - Linux Foundation Open Printing WG
Blue Roof Music/High North Inc
email: blueroofmusic@gmail.com
winter:
 579 Park Place Saline, MI 48176
 734-944-0094
summer:
 PO Box 221 Grand Marais, MI 49839
 906-494-2434


On Mon, Sep 22, 2008 at 9:39 PM, henri <henri@stmargarets.school.nz> wrote:
> Hi I work with Lucid Information and will be in Japan from the 21st of
> October 2008.
>
> I am currently planning to leave New Zealand on the 20th of September.
> The ticket is still wait listed.
> I would be interested in attending the presentation. This is primarily
> due to my involvement with PrintingWorks.
>
> More details on PrintingWorks is available from the following URL : http://www.lucidsystems.org/printingworks/
>
> I am looking forward to meeting with you.
>
>
> On 23/09/2008, at 2:17 AM, Petrie, Glen wrote:
>
>> The presentation is not until Oct 21-23.  So end of this week is fine
>> and, that, still gives lots of time for questions and feedback.
>>
>> gwp
>>
>> > -----Original Message-----
>> > From: TORATANI Yasumasa [mailto:toratani.yasumasa@canon.co.jp]
>> > Sent: Monday, September 22, 2008 3:19 AM
>> > To: Petrie, Glen
>> > Cc: Till Kamppeter; printing-architecture@lists.linux-foundation.org
>> > Subject: Re: [Printing-architecture] Slides for GSoC report on the
>> PWG
>> > Meetingin October
>> >
>> > Hi Glen,
>> >
>> > On Fri, 19 Sep 2008 07:56:24 -0700
>> > "Petrie, Glen" <glen.petrie@eitc.epson.com> wrote:
>> >
>> > (snip)
>> >
>> > > ============
>> > >
>> > > Toratani
>> > >
>> > > Can you provide overview slides on what "has, is and will" be
>> going
>> on
>> > > with OpenPrinting Japan.  Personally, I am really interested in
>> future
>> > > activities and who is still involved in OpenPrinting Japan.
>> >
>> > Yes, but when I should prepare the slides?
>> >
>> > I need a time to confirm the slide contents with OpenPrinting
>> > Japan members, and it will finish by the end of this week.
>> >
>> > Regards,
>> > TORATANI
>> >
>>
>> _______________________________________________
>> Printing-architecture mailing list
>> Printing-architecture@lists.linux-foundation.org
>> https://lists.linux-foundation.org/mailman/listinfo/printing-architecture
>
> _______________________________________________
> Printing-architecture mailing list
> Printing-architecture@lists.linux-foundation.org
> https://lists.linux-foundation.org/mailman/listinfo/printing-architecture
>

Re: [Printing-architecture] Slides for GSoC report on the PWG Meetingin October

[TORATANI Yasumasa]

Hi Henri, 

> > Hi I work with Lucid Information and will be in Japan from the 21st of
> > October 2008.

Could you please let us know where and how long you will stay in Japan
from 21st Oct. 2008?

We will have a regular monthly meeting on 9th of Oct in Tokyo, and
can discuss the separate meeting with you around 21th week.

TORATANI


On Tue, 23 Sep 2008 12:55:23 -0400
"Ira McDonald" <blueroofmusic@gmail.com> wrote:

> Hi Henri,
> 
> Actually, this presentation will be in the USA, at the next IEEE-ISTO
> Printing Working Group standards meeting in Lexington, Kentucky,
> on Tuesday 21 October.
> 
>   http://www.pwg.org/chair/meeting-info/October_2008_Lexington.html
> 
> Perhaps you can meet with some of the LF Open Printing Japan
> active participants while you are in Japan next month.
> 
> Toratani-san - could you try to arrange meeting with Henri?
> 
> Cheers,
> - Ira
> 
> 
> -- 
> Ira McDonald (Musician / Software Architect)
> Chair - Linux Foundation Open Printing WG
> Blue Roof Music/High North Inc
> email: blueroofmusic@gmail.com
> winter:
>  579 Park Place Saline, MI 48176
>  734-944-0094
> summer:
>  PO Box 221 Grand Marais, MI 49839
>  906-494-2434
> 
> 
> On Mon, Sep 22, 2008 at 9:39 PM, henri <henri@stmargarets.school.nz> wrote:
> > Hi I work with Lucid Information and will be in Japan from the 21st of
> > October 2008.
> >
> > I am currently planning to leave New Zealand on the 20th of September.
> > The ticket is still wait listed.
> > I would be interested in attending the presentation. This is primarily
> > due to my involvement with PrintingWorks.
> >
> > More details on PrintingWorks is available from the following URL : http://www.lucidsystems.org/printingworks/
> >
> > I am looking forward to meeting with you.
> >
> >
> > On 23/09/2008, at 2:17 AM, Petrie, Glen wrote:
> >
> >> The presentation is not until Oct 21-23.  So end of this week is fine
> >> and, that, still gives lots of time for questions and feedback.
> >>
> >> gwp
> >>
> >> > -----Original Message-----
> >> > From: TORATANI Yasumasa [mailto:toratani.yasumasa@canon.co.jp]
> >> > Sent: Monday, September 22, 2008 3:19 AM
> >> > To: Petrie, Glen
> >> > Cc: Till Kamppeter; printing-architecture@lists.linux-foundation.org
> >> > Subject: Re: [Printing-architecture] Slides for GSoC report on the
> >> PWG
> >> > Meetingin October
> >> >
> >> > Hi Glen,
> >> >
> >> > On Fri, 19 Sep 2008 07:56:24 -0700
> >> > "Petrie, Glen" <glen.petrie@eitc.epson.com> wrote:
> >> >
> >> > (snip)
> >> >
> >> > > ============
> >> > >
> >> > > Toratani
> >> > >
> >> > > Can you provide overview slides on what "has, is and will" be
> >> going
> >> on
> >> > > with OpenPrinting Japan.  Personally, I am really interested in
> >> future
> >> > > activities and who is still involved in OpenPrinting Japan.
> >> >
> >> > Yes, but when I should prepare the slides?
> >> >
> >> > I need a time to confirm the slide contents with OpenPrinting
> >> > Japan members, and it will finish by the end of this week.
> >> >
> >> > Regards,
> >> > TORATANI
> >> >
> >>
> >> _______________________________________________
> >> Printing-architecture mailing list
> >> Printing-architecture@lists.linux-foundation.org
> >> https://lists.linux-foundation.org/mailman/listinfo/printing-architecture
> >
> > _______________________________________________
> > Printing-architecture mailing list
> > Printing-architecture@lists.linux-foundation.org
> > https://lists.linux-foundation.org/mailman/listinfo/printing-architecture
> >

-----------------------------------------
TORATANI Yasumasa
Software Platform Technology Development Dept. 33
Digital Platform Technology Development HQs, CANON INC.