From: "Steven A. Falco" <sfalco@harris.com>
To: "linuxppc-dev@ozlabs.org" <linuxppc-dev@ozlabs.org>
Subject: PPC440EPx gpio driver
Date: Wed, 08 Oct 2008 16:56:54 -0400 [thread overview]
Message-ID: <48ED1E96.4060406@harris.com> (raw)
I have begun writing a driver for the GPIOs of the PPC440EPx. I just
noticed that the PIKA Warp .dts references a device "ibm,gpio-440ep",
but so far I have not been able to find a driver for that device.
So, here is what I have so far (patch is off 2.6.27-rc9). It is not
sufficiently general to be merged at this point, but it does appear
to function with my Sequoia board (only tested gpio input, so far).
Signed-off-by: Steve Falco <sfalco at harris.com>
diff --git a/arch/powerpc/platforms/44x/ppc4xx-gpio.c b/arch/powerpc/platforms/44x/ppc4xx-gpio.c
new file mode 100644
index 0000000..ce552b4
--- /dev/null
+++ b/arch/powerpc/platforms/44x/ppc4xx-gpio.c
@@ -0,0 +1,246 @@
+/*
+ * PPC4xx gpio driver
+ *
+ * Copyright (c) 2008 Harris Corporation
+ * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/of.h>
+#include <linux/kernel.h>
+#include <linux/of_gpio.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+
+#include <asm/gpio.h>
+#include <asm/ppc4xx.h>
+
+static DEFINE_SPINLOCK(gpio_lock);
+
+struct ppc4xx_gpiochip {
+ struct of_mm_gpio_chip mmchip;
+ unsigned int shadow_or;
+ unsigned int shadow_tcr;
+ unsigned int shadow_osrl;
+ unsigned int shadow_osrh;
+ unsigned int shadow_tsrl;
+ unsigned int shadow_tsrh;
+ unsigned int shadow_odr;
+};
+
+/*
+ * GPIO LIB API implementation for GPIOs
+ *
+ * There are a maximum of 64 gpios, spread over two sets of control registers.
+ * The sets are called GPIO0 and GPIO1. Each set is managed separately, so
+ * there will be two entried in the .dts file.
+ */
+
+static int ppc4xx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+ unsigned int ret;
+
+ ret = (in_be32(®s->gpio_ir) >> (31 - gpio)) & 1;
+
+ return ret;
+}
+
+static inline void
+__ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpiochip *chip = container_of(mm_gc,
+ struct ppc4xx_gpiochip, mmchip);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+
+ if (val)
+ chip->shadow_or |= 1 << (31 - gpio);
+ else
+ chip->shadow_or &= ~(1 << (31 - gpio));
+ out_be32(®s->gpio_or, chip->shadow_or);
+}
+
+static void
+ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ __ppc4xx_gpio_set(gc, gpio, val);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+
+ pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+}
+
+static int ppc4xx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpiochip *chip = container_of(mm_gc,
+ struct ppc4xx_gpiochip, mmchip);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ /* Disable open-drain function */
+ chip->shadow_odr &= ~(1 << (31 - gpio));
+ out_be32(®s->gpio_odr, chip->shadow_odr);
+
+ /* Float the pin */
+ chip->shadow_tcr &= ~(1 << (31 - gpio));
+ out_be32(®s->gpio_tcr, chip->shadow_tcr);
+
+ /* Bits 0-15 use TSRL/OSRL, bits 16-31 use TSRH/OSRH */
+ if(gpio < 16) {
+ chip->shadow_osrl &= ~(3 << ((15 - gpio) * 2));
+ out_be32(®s->gpio_osrl, chip->shadow_osrl);
+
+ chip->shadow_tsrl &= ~(3 << ((15 - gpio) * 2));
+ out_be32(®s->gpio_tsrl, chip->shadow_tsrl);
+ } else {
+ chip->shadow_osrh &= ~(3 << ((31 - gpio) * 2));
+ out_be32(®s->gpio_osrh, chip->shadow_osrh);
+
+ chip->shadow_tsrh &= ~(3 << ((31 - gpio) * 2));
+ out_be32(®s->gpio_tsrh, chip->shadow_tsrh);
+ }
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+
+ return 0;
+}
+
+static int
+ppc4xx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpiochip *chip = container_of(mm_gc,
+ struct ppc4xx_gpiochip, mmchip);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+
+ /* First set initial value */
+ __ppc4xx_gpio_set(gc, gpio, val);
+
+ /* Disable open-drain function */
+ chip->shadow_odr &= ~(1 << (31 - gpio));
+ out_be32(®s->gpio_odr, chip->shadow_odr);
+
+ /* Drive the pin */
+ chip->shadow_tcr |= (1 << (31 - gpio));
+ out_be32(®s->gpio_tcr, chip->shadow_tcr);
+
+ /* Bits 0-15 use TSRL, bits 16-31 use TSRH */
+ if(gpio < 16) {
+ chip->shadow_osrl &= ~(3 << ((15 - gpio) * 2));
+ out_be32(®s->gpio_osrl, chip->shadow_osrl);
+
+ chip->shadow_tsrl &= ~(3 << ((15 - gpio) * 2));
+ out_be32(®s->gpio_tsrl, chip->shadow_tsrl);
+ } else {
+ chip->shadow_osrh &= ~(3 << ((31 - gpio) * 2));
+ out_be32(®s->gpio_osrh, chip->shadow_osrh);
+
+ chip->shadow_tsrh &= ~(3 << ((31 - gpio) * 2));
+ out_be32(®s->gpio_tsrh, chip->shadow_tsrh);
+ }
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
+
+ pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+
+ return 0;
+}
+
+static int __devinit ppc4xx_gpiochip_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ struct ppc4xx_gpiochip *chip;
+ struct of_gpio_chip *ofchip;
+ struct ppc4xx_gpio __iomem *regs;
+ int ret;
+
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ ofchip = &chip->mmchip.of_gc;
+
+ ofchip->gpio_cells = 2;
+ ofchip->gc.ngpio = 32;
+ ofchip->gc.direction_input = ppc4xx_gpio_dir_in;
+ ofchip->gc.direction_output = ppc4xx_gpio_dir_out;
+ ofchip->gc.get = ppc4xx_gpio_get;
+ ofchip->gc.set = ppc4xx_gpio_set;
+
+ ret = of_mm_gpiochip_add(ofdev->node, &chip->mmchip);
+ if (ret)
+ return ret;
+
+ regs = chip->mmchip.regs;
+ chip->shadow_or = in_be32(®s->gpio_or);
+ chip->shadow_tcr = in_be32(®s->gpio_tcr);
+ chip->shadow_osrl = in_be32(®s->gpio_osrl);
+ chip->shadow_osrh = in_be32(®s->gpio_osrh);
+ chip->shadow_tsrl = in_be32(®s->gpio_tsrl);
+ chip->shadow_tsrh = in_be32(®s->gpio_tsrh);
+ chip->shadow_odr = in_be32(®s->gpio_odr);
+
+ return 0;
+}
+
+static int ppc4xx_gpiochip_remove(struct of_device *ofdev)
+{
+ return -EBUSY;
+}
+
+static const struct of_device_id ppc4xx_gpiochip_match[] = {
+ {
+ .compatible = "amcc,ppc4xx-gpio",
+ },
+ {}
+};
+
+static struct of_platform_driver ppc4xx_gpiochip_driver = {
+ .name = "gpio",
+ .match_table = ppc4xx_gpiochip_match,
+ .probe = ppc4xx_gpiochip_probe,
+ .remove = ppc4xx_gpiochip_remove,
+};
+
+static int __init ppc4xx_gpio_init(void)
+{
+ if (of_register_platform_driver(&ppc4xx_gpiochip_driver))
+ printk(KERN_ERR "Unable to register GPIO driver\n");
+
+ return 0;
+}
+
+
+/* Make sure we get initialised before anyone else tries to use us */
+subsys_initcall(ppc4xx_gpio_init);
+
+/* No exit call at the moment as we cannot unregister of gpio chips */
+
+MODULE_DESCRIPTION("AMCC PPC4xx gpio driver");
+MODULE_AUTHOR("Steve Falco <sfalco@harris.com");
+MODULE_LICENSE("GPL v2");
+
next reply other threads:[~2008-10-08 20:56 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-08 20:56 Steven A. Falco [this message]
2008-10-08 21:33 ` PPC440EPx gpio driver Steven A. Falco
2008-10-09 13:49 ` Anton Vorontsov
2008-10-09 14:23 ` Stefan Roese
2008-10-09 15:10 ` Steven A. Falco
2008-10-09 15:19 ` Stefan Roese
2008-10-09 16:08 ` Anton Vorontsov
2008-10-09 16:55 ` Steven A. Falco
2008-10-09 17:09 ` Steven A. Falco
2008-10-09 17:38 ` Anton Vorontsov
2008-10-09 18:04 ` Steven A. Falco
2008-10-09 18:46 ` Stefan Roese
2008-10-09 19:03 ` Anton Vorontsov
2008-10-09 22:08 ` Sean MacLennan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48ED1E96.4060406@harris.com \
--to=sfalco@harris.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.