From: "Steven A. Falco" <sfalco@harris.com>
To: avorontsov@ru.mvista.com
Cc: "linuxppc-dev@ozlabs.org" <linuxppc-dev@ozlabs.org>
Subject: Re: PPC440EPx gpio driver
Date: Thu, 09 Oct 2008 14:04:49 -0400 [thread overview]
Message-ID: <48EE47C1.1000303@harris.com> (raw)
In-Reply-To: <20081009173810.GA14959@oksana.dev.rtsoft.ru>
I've moved the config variable to platforms/44x, and added the #include
of linux/types.h.
Since I don't have any PPC405 boards, I am unable to test with that CPU.
So, I am reluctant to add the config variable to platforms/40x. It
would be trivial to add, if someone else has a suitable setup and could
run a test.
Signed-off-by: Steve Falco <sfalco at harris.com>
diff --git a/arch/powerpc/include/asm/ppc4xx.h b/arch/powerpc/include/asm/ppc4xx.h
index 033039a..589ff5c 100644
--- a/arch/powerpc/include/asm/ppc4xx.h
+++ b/arch/powerpc/include/asm/ppc4xx.h
@@ -13,6 +13,30 @@
#ifndef __ASM_POWERPC_PPC4xx_H__
#define __ASM_POWERPC_PPC4xx_H__
+#include <linux/types.h>
+
+/* GPIO */
+struct ppc4xx_gpio {
+ __be32 gpio_or;
+ __be32 gpio_tcr;
+ __be32 gpio_osrl;
+ __be32 gpio_osrh;
+ __be32 gpio_tsrl;
+ __be32 gpio_tsrh;
+ __be32 gpio_odr;
+ __be32 gpio_ir;
+ __be32 gpio_rr1;
+ __be32 gpio_rr2;
+ __be32 gpio_rr3;
+ __be32 reserved1;
+ __be32 gpio_isr1l;
+ __be32 gpio_isr1h;
+ __be32 gpio_isr2l;
+ __be32 gpio_isr2h;
+ __be32 gpio_isr3l;
+ __be32 gpio_isr3h;
+};
+
extern void ppc4xx_reset_system(char *cmd);
#endif /* __ASM_POWERPC_PPC4xx_H__ */
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 249ba01..eec5cb4 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -127,6 +143,14 @@ config XILINX_VIRTEX440_GENERIC_BOARD
Most Virtex 5 designs should use this unless it needs to do some
special configuration at board probe time.
+config PPC4xx_GPIO
+ bool "PPC4xx GPIO support"
+ depends on 44x
+ select ARCH_REQUIRE_GPIOLIB
+ select GENERIC_GPIO
+ help
+ Enable gpiolib support for ppc440 based boards
+
# 44x specific CPU modules, selected based on the board above.
config 440EP
bool
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index a90054b..35d5765 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_OF_RTC) += of_rtc.o
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_4xx) += ppc4xx_pci.o
endif
+obj-$(CONFIG_PPC4xx_GPIO) += ppc4xx_gpio.o
# Temporary hack until we have migrated to asm-powerpc
ifeq ($(ARCH),powerpc)
diff --git a/arch/powerpc/sysdev/ppc4xx_gpio.c b/arch/powerpc/sysdev/ppc4xx_gpio.c
new file mode 100644
index 0000000..d401eba
--- /dev/null
+++ b/arch/powerpc/sysdev/ppc4xx_gpio.c
@@ -0,0 +1,239 @@
+/*
+ * PPC4xx gpio driver
+ *
+ * Copyright (c) 2008 Harris Corporation
+ * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Steve Falco <sfalco@harris.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <linux/types.h>
+
+#include <asm/ppc4xx.h>
+
+struct ppc4xx_gpio_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+ u32 shadow_or;
+ u32 shadow_tcr;
+ u32 shadow_osrl;
+ u32 shadow_osrh;
+ u32 shadow_tsrl;
+ u32 shadow_tsrh;
+ u32 shadow_odr;
+};
+
+/*
+ * GPIO LIB API implementation for GPIOs
+ *
+ * There are a maximum of 64 gpios, spread over two sets of control registers.
+ * The sets are called GPIO0 and GPIO1. Each set is managed separately, so
+ * there will be two entried in the .dts file.
+ */
+
+static inline struct ppc4xx_gpio_chip *
+to_ppc4xx_gpiochip(struct of_mm_gpio_chip *mm_gc)
+{
+ return container_of(mm_gc, struct ppc4xx_gpio_chip, mm_gc);
+}
+
+static int ppc4xx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+ u32 ret;
+
+ ret = (in_be32(®s->gpio_ir) >> (31 - gpio)) & 1;
+
+ return ret;
+}
+
+static inline void
+__ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpio_chip *chip = to_ppc4xx_gpiochip(mm_gc);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+
+ if (val)
+ chip->shadow_or |= 1 << (31 - gpio);
+ else
+ chip->shadow_or &= ~(1 << (31 - gpio));
+ out_be32(®s->gpio_or, chip->shadow_or);
+}
+
+static void
+ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpio_chip *chip = to_ppc4xx_gpiochip(mm_gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->lock, flags);
+
+ __ppc4xx_gpio_set(gc, gpio, val);
+
+ spin_unlock_irqrestore(&chip->lock, flags);
+
+ pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+}
+
+static int ppc4xx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpio_chip *chip = to_ppc4xx_gpiochip(mm_gc);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->lock, flags);
+
+ /* Disable open-drain function */
+ chip->shadow_odr &= ~(1 << (31 - gpio));
+ out_be32(®s->gpio_odr, chip->shadow_odr);
+
+ /* Float the pin */
+ chip->shadow_tcr &= ~(1 << (31 - gpio));
+ out_be32(®s->gpio_tcr, chip->shadow_tcr);
+
+ /* Bits 0-15 use TSRL/OSRL, bits 16-31 use TSRH/OSRH */
+ if (gpio < 16) {
+ chip->shadow_osrl &= ~(3 << ((15 - gpio) * 2));
+ out_be32(®s->gpio_osrl, chip->shadow_osrl);
+
+ chip->shadow_tsrl &= ~(3 << ((15 - gpio) * 2));
+ out_be32(®s->gpio_tsrl, chip->shadow_tsrl);
+ } else {
+ chip->shadow_osrh &= ~(3 << ((31 - gpio) * 2));
+ out_be32(®s->gpio_osrh, chip->shadow_osrh);
+
+ chip->shadow_tsrh &= ~(3 << ((31 - gpio) * 2));
+ out_be32(®s->gpio_tsrh, chip->shadow_tsrh);
+ }
+
+ spin_unlock_irqrestore(&chip->lock, flags);
+
+ return 0;
+}
+
+static int
+ppc4xx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpio_chip *chip = to_ppc4xx_gpiochip(mm_gc);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->lock, flags);
+
+ /* First set initial value */
+ __ppc4xx_gpio_set(gc, gpio, val);
+
+ /* Disable open-drain function */
+ chip->shadow_odr &= ~(1 << (31 - gpio));
+ out_be32(®s->gpio_odr, chip->shadow_odr);
+
+ /* Drive the pin */
+ chip->shadow_tcr |= (1 << (31 - gpio));
+ out_be32(®s->gpio_tcr, chip->shadow_tcr);
+
+ /* Bits 0-15 use TSRL, bits 16-31 use TSRH */
+ if (gpio < 16) {
+ chip->shadow_osrl &= ~(3 << ((15 - gpio) * 2));
+ out_be32(®s->gpio_osrl, chip->shadow_osrl);
+
+ chip->shadow_tsrl &= ~(3 << ((15 - gpio) * 2));
+ out_be32(®s->gpio_tsrl, chip->shadow_tsrl);
+ } else {
+ chip->shadow_osrh &= ~(3 << ((31 - gpio) * 2));
+ out_be32(®s->gpio_osrh, chip->shadow_osrh);
+
+ chip->shadow_tsrh &= ~(3 << ((31 - gpio) * 2));
+ out_be32(®s->gpio_tsrh, chip->shadow_tsrh);
+ }
+
+ spin_unlock_irqrestore(&chip->lock, flags);
+
+ pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+
+ return 0;
+}
+
+static void __init ppc4xx_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+ struct ppc4xx_gpio_chip *chip = to_ppc4xx_gpiochip(mm_gc);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+
+ chip->shadow_or = in_be32(®s->gpio_or);
+ chip->shadow_tcr = in_be32(®s->gpio_tcr);
+ chip->shadow_osrl = in_be32(®s->gpio_osrl);
+ chip->shadow_osrh = in_be32(®s->gpio_osrh);
+ chip->shadow_tsrl = in_be32(®s->gpio_tsrl);
+ chip->shadow_tsrh = in_be32(®s->gpio_tsrh);
+ chip->shadow_odr = in_be32(®s->gpio_odr);
+}
+
+static int __init ppc4xx_add_gpiochips(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, "amcc,ppc4xx-gpio") {
+ int ret;
+ struct ppc4xx_gpio_chip *ppc4xx_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct of_gpio_chip *of_gc;
+ struct gpio_chip *gc;
+
+ ppc4xx_gc = kzalloc(sizeof(*ppc4xx_gc), GFP_KERNEL);
+ if (!ppc4xx_gc) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ spin_lock_init(&ppc4xx_gc->lock);
+
+ mm_gc = &ppc4xx_gc->mm_gc;
+ of_gc = &mm_gc->of_gc;
+ gc = &of_gc->gc;
+
+ mm_gc->save_regs = ppc4xx_gpio_save_regs;
+ of_gc->gpio_cells = 2;
+ gc->ngpio = 32;
+ gc->direction_input = ppc4xx_gpio_dir_in;
+ gc->direction_output = ppc4xx_gpio_dir_out;
+ gc->get = ppc4xx_gpio_get;
+ gc->set = ppc4xx_gpio_set;
+
+ ret = of_mm_gpiochip_add(np, mm_gc);
+ if (ret)
+ goto err;
+ continue;
+err:
+ pr_err("%s: registration failed with status %d\n",
+ np->full_name, ret);
+ kfree(ppc4xx_gc);
+ /* try others anyway */
+ }
+ return 0;
+}
+arch_initcall(ppc4xx_add_gpiochips);
next prev parent reply other threads:[~2008-10-09 18:04 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-08 20:56 PPC440EPx gpio driver Steven A. Falco
2008-10-08 21:33 ` Steven A. Falco
2008-10-09 13:49 ` Anton Vorontsov
2008-10-09 14:23 ` Stefan Roese
2008-10-09 15:10 ` Steven A. Falco
2008-10-09 15:19 ` Stefan Roese
2008-10-09 16:08 ` Anton Vorontsov
2008-10-09 16:55 ` Steven A. Falco
2008-10-09 17:09 ` Steven A. Falco
2008-10-09 17:38 ` Anton Vorontsov
2008-10-09 18:04 ` Steven A. Falco [this message]
2008-10-09 18:46 ` Stefan Roese
2008-10-09 19:03 ` Anton Vorontsov
2008-10-09 22:08 ` Sean MacLennan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48EE47C1.1000303@harris.com \
--to=sfalco@harris.com \
--cc=avorontsov@ru.mvista.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.