From: "Steven A. Falco" <sfalco@harris.com>
To: "Steven A. Falco" <sfalco@harris.com>
Cc: "linuxppc-dev@ozlabs.org" <linuxppc-dev@ozlabs.org>
Subject: Re: PPC440EPx gpio driver
Date: Thu, 09 Oct 2008 11:10:25 -0400 [thread overview]
Message-ID: <48EE1EE1.1050206@harris.com> (raw)
In-Reply-To: <48ED1E96.4060406@harris.com>
Anton - thanks very much for your comments. I learned a lot, and I've
incorporated your suggestions into the driver, copy attached.
Stefan - hope I didn't step on your toes, but I was not aware you were
also working on this. Anyway, it seemed like a good place to make my
first "significant" contribution to the kernel source. But I'll defer
to the choice of the community.
Signed-off-by: Steve Falco <sfalco at harris.com>
diff --git a/arch/powerpc/include/asm/ppc4xx.h b/arch/powerpc/include/asm/ppc4xx.h
index 033039a..acbccb7 100644
--- a/arch/powerpc/include/asm/ppc4xx.h
+++ b/arch/powerpc/include/asm/ppc4xx.h
@@ -13,6 +13,28 @@
#ifndef __ASM_POWERPC_PPC4xx_H__
#define __ASM_POWERPC_PPC4xx_H__
+/* GPIO */
+struct ppc4xx_gpio {
+ unsigned int gpio_or;
+ unsigned int gpio_tcr;
+ unsigned int gpio_osrl;
+ unsigned int gpio_osrh;
+ unsigned int gpio_tsrl;
+ unsigned int gpio_tsrh;
+ unsigned int gpio_odr;
+ unsigned int gpio_ir;
+ unsigned int gpio_rr1;
+ unsigned int gpio_rr2;
+ unsigned int gpio_rr3;
+ unsigned int reserved1;
+ unsigned int gpio_isr1l;
+ unsigned int gpio_isr1h;
+ unsigned int gpio_isr2l;
+ unsigned int gpio_isr2h;
+ unsigned int gpio_isr3l;
+ unsigned int gpio_isr3h;
+};
+
extern void ppc4xx_reset_system(char *cmd);
#endif /* __ASM_POWERPC_PPC4xx_H__ */
diff --git a/arch/powerpc/platforms/44x/ppc4xx-gpio.c b/arch/powerpc/platforms/44x/ppc4xx-gpio.c
new file mode 100644
index 0000000..fb80544
--- /dev/null
+++ b/arch/powerpc/platforms/44x/ppc4xx-gpio.c
@@ -0,0 +1,265 @@
+/*
+ * PPC4xx gpio driver
+ *
+ * Copyright (c) 2008 Harris Corporation
+ * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/of.h>
+#include <linux/kernel.h>
+#include <linux/of_gpio.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/init.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/gpio.h>
+
+#include <asm/ppc4xx.h>
+
+struct ppc4xx_gpiochip {
+ struct of_mm_gpio_chip mmchip;
+ spinlock_t gpio_lock;
+ __be32 shadow_or;
+ __be32 shadow_tcr;
+ __be32 shadow_osrl;
+ __be32 shadow_osrh;
+ __be32 shadow_tsrl;
+ __be32 shadow_tsrh;
+ __be32 shadow_odr;
+};
+
+/*
+ * GPIO LIB API implementation for GPIOs
+ *
+ * There are a maximum of 64 gpios, spread over two sets of control registers.
+ * The sets are called GPIO0 and GPIO1. Each set is managed separately, so
+ * there will be two entried in the .dts file.
+ */
+
+static int ppc4xx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+ u32 ret;
+
+ ret = (in_be32(®s->gpio_ir) >> (31 - gpio)) & 1;
+
+ return ret;
+}
+
+static inline void
+__ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpiochip *chip = container_of(mm_gc,
+ struct ppc4xx_gpiochip, mmchip);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+
+ if (val)
+ chip->shadow_or |= 1 << (31 - gpio);
+ else
+ chip->shadow_or &= ~(1 << (31 - gpio));
+ out_be32(®s->gpio_or, chip->shadow_or);
+}
+
+static void
+ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpiochip *chip = container_of(mm_gc,
+ struct ppc4xx_gpiochip, mmchip);
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->gpio_lock, flags);
+
+ __ppc4xx_gpio_set(gc, gpio, val);
+
+ spin_unlock_irqrestore(&chip->gpio_lock, flags);
+
+ pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+}
+
+static int ppc4xx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpiochip *chip = container_of(mm_gc,
+ struct ppc4xx_gpiochip, mmchip);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->gpio_lock, flags);
+
+ /* Disable open-drain function */
+ chip->shadow_odr &= ~(1 << (31 - gpio));
+ out_be32(®s->gpio_odr, chip->shadow_odr);
+
+ /* Float the pin */
+ chip->shadow_tcr &= ~(1 << (31 - gpio));
+ out_be32(®s->gpio_tcr, chip->shadow_tcr);
+
+ /* Bits 0-15 use TSRL/OSRL, bits 16-31 use TSRH/OSRH */
+ if (gpio < 16) {
+ chip->shadow_osrl &= ~(3 << ((15 - gpio) * 2));
+ out_be32(®s->gpio_osrl, chip->shadow_osrl);
+
+ chip->shadow_tsrl &= ~(3 << ((15 - gpio) * 2));
+ out_be32(®s->gpio_tsrl, chip->shadow_tsrl);
+ } else {
+ chip->shadow_osrh &= ~(3 << ((31 - gpio) * 2));
+ out_be32(®s->gpio_osrh, chip->shadow_osrh);
+
+ chip->shadow_tsrh &= ~(3 << ((31 - gpio) * 2));
+ out_be32(®s->gpio_tsrh, chip->shadow_tsrh);
+ }
+
+ spin_unlock_irqrestore(&chip->gpio_lock, flags);
+
+ return 0;
+}
+
+static int
+ppc4xx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct ppc4xx_gpiochip *chip = container_of(mm_gc,
+ struct ppc4xx_gpiochip, mmchip);
+ struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chip->gpio_lock, flags);
+
+ /* First set initial value */
+ __ppc4xx_gpio_set(gc, gpio, val);
+
+ /* Disable open-drain function */
+ chip->shadow_odr &= ~(1 << (31 - gpio));
+ out_be32(®s->gpio_odr, chip->shadow_odr);
+
+ /* Drive the pin */
+ chip->shadow_tcr |= (1 << (31 - gpio));
+ out_be32(®s->gpio_tcr, chip->shadow_tcr);
+
+ /* Bits 0-15 use TSRL, bits 16-31 use TSRH */
+ if (gpio < 16) {
+ chip->shadow_osrl &= ~(3 << ((15 - gpio) * 2));
+ out_be32(®s->gpio_osrl, chip->shadow_osrl);
+
+ chip->shadow_tsrl &= ~(3 << ((15 - gpio) * 2));
+ out_be32(®s->gpio_tsrl, chip->shadow_tsrl);
+ } else {
+ chip->shadow_osrh &= ~(3 << ((31 - gpio) * 2));
+ out_be32(®s->gpio_osrh, chip->shadow_osrh);
+
+ chip->shadow_tsrh &= ~(3 << ((31 - gpio) * 2));
+ out_be32(®s->gpio_tsrh, chip->shadow_tsrh);
+ }
+
+ spin_unlock_irqrestore(&chip->gpio_lock, flags);
+
+ pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val);
+
+ return 0;
+}
+
+static void __devinit ppc4xx_gpiochip_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+ struct ppc4xx_gpiochip *chip = container_of(mm_gc,
+ struct ppc4xx_gpiochip, mmchip);
+ struct ppc4xx_gpio __iomem *regs;
+
+ regs = mm_gc->regs;
+ chip->shadow_or = in_be32(®s->gpio_or);
+ chip->shadow_tcr = in_be32(®s->gpio_tcr);
+ chip->shadow_osrl = in_be32(®s->gpio_osrl);
+ chip->shadow_osrh = in_be32(®s->gpio_osrh);
+ chip->shadow_tsrl = in_be32(®s->gpio_tsrl);
+ chip->shadow_tsrh = in_be32(®s->gpio_tsrh);
+ chip->shadow_odr = in_be32(®s->gpio_odr);
+}
+
+static int __devinit ppc4xx_gpiochip_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ struct ppc4xx_gpiochip *chip;
+ struct of_gpio_chip *ofchip;
+ int ret;
+
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ spin_lock_init(&chip->gpio_lock);
+
+ chip->mmchip.save_regs = ppc4xx_gpiochip_save_regs;
+
+ ofchip = &chip->mmchip.of_gc;
+
+ ofchip->gpio_cells = 2;
+ ofchip->gc.ngpio = 32;
+ ofchip->gc.direction_input = ppc4xx_gpio_dir_in;
+ ofchip->gc.direction_output = ppc4xx_gpio_dir_out;
+ ofchip->gc.get = ppc4xx_gpio_get;
+ ofchip->gc.set = ppc4xx_gpio_set;
+
+ ret = of_mm_gpiochip_add(ofdev->node, &chip->mmchip);
+ if (ret) {
+ kfree(chip);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ppc4xx_gpiochip_remove(struct of_device *ofdev)
+{
+ return -EBUSY;
+}
+
+static const struct of_device_id ppc4xx_gpiochip_match[] = {
+ {
+ .compatible = "amcc,ppc4xx-gpio",
+ },
+ {}
+};
+
+static struct of_platform_driver ppc4xx_gpiochip_driver = {
+ .name = "ppc4xx-gpio",
+ .match_table = ppc4xx_gpiochip_match,
+ .probe = ppc4xx_gpiochip_probe,
+ .remove = ppc4xx_gpiochip_remove,
+};
+
+static int __init ppc4xx_gpio_init(void)
+{
+ if (of_register_platform_driver(&ppc4xx_gpiochip_driver))
+ printk(KERN_ERR "%s: Unable to register GPIO driver\n",
+ __func__);
+
+ return 0;
+}
+
+
+/* Make sure we get initialised before anyone else tries to use us */
+subsys_initcall(ppc4xx_gpio_init);
+
+/* No exit call at the moment as we cannot unregister of gpio chips */
+
+MODULE_DESCRIPTION("AMCC PPC4xx gpio driver");
+MODULE_AUTHOR("Steve Falco <sfalco@harris.com");
+MODULE_LICENSE("GPL v2");
+
next prev parent reply other threads:[~2008-10-09 15:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-08 20:56 PPC440EPx gpio driver Steven A. Falco
2008-10-08 21:33 ` Steven A. Falco
2008-10-09 13:49 ` Anton Vorontsov
2008-10-09 14:23 ` Stefan Roese
2008-10-09 15:10 ` Steven A. Falco [this message]
2008-10-09 15:19 ` Stefan Roese
2008-10-09 16:08 ` Anton Vorontsov
2008-10-09 16:55 ` Steven A. Falco
2008-10-09 17:09 ` Steven A. Falco
2008-10-09 17:38 ` Anton Vorontsov
2008-10-09 18:04 ` Steven A. Falco
2008-10-09 18:46 ` Stefan Roese
2008-10-09 19:03 ` Anton Vorontsov
2008-10-09 22:08 ` Sean MacLennan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48EE1EE1.1050206@harris.com \
--to=sfalco@harris.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.