* [linux-dvb] Technotrend TT-Connect S2-3650 CI
@ 2008-10-13 14:52 Christian Heidingsfelder [Heidingsfelder + Partner]
2008-10-13 15:34 ` Faruk A
0 siblings, 1 reply; 16+ messages in thread
From: Christian Heidingsfelder [Heidingsfelder + Partner] @ 2008-10-13 14:52 UTC (permalink / raw)
To: linux-dvb
[-- Attachment #1: Type: text/plain, Size: 2470 bytes --]
Hi all,
again, if somebody is
working on
or interested in
that DVB-S USB Reciever with Card Interface he can msg me for
informations or whatever :- )
Regards Chris
--
Mit freundlichen Grüßen
Christian Heidingsfelder
+---------------------------------+--------------------------------+
| Heidingsfelder + Partner | Heidingsfelder + Partner |
| | Tel: +49 7577 933864 |
| Kirchgasse 9 | Fax: +49 7577 933863 |
| 72474 Winterlingen-Benzingen | christian@heidingsfelder.eu |
| DE | |
| | |
+---------------------------------+--------------------------------+
***********************************
Diese eMailadresse ist keine Zustelladresse.
Aus technischen Gruenden kann ich Ihre eMail nicht sofort nach
Eingang darauf überpruefen, ob sie Fristen oder Termine enthaelt.
Daher uebernehme ich keine Gewaehr, daß Ihre Nachricht so
rechtzeitig gelesen wird, daß alle zur Einhaltung von etwaigen
Fristen oder Terminen notwendigen Massnahmen ergriffen werden
koennen.
Bitte uebermitteln Sie solche Schriftstuecke per Fax oder Brief an
die weiter obenstehende Anschrift.
***********************************
Hiermit widerspreche ich ausdruecklich jeglicher Nutzung oder
Uebermittlung meiner Daten, gleichgueltig, zu welchen Zwecken oder
an welchen Empfaenger sie erfolgt. Insbesondere widerspreche ich
der Nutzung oder Uebermittlung meiner Daten fuer Werbe, Markt-
oder Meinungsforschungszwecken gemaess
§ 28 Absatz 3 Bundesdatenschutzgesetz.
***********************************
Sicherheitshinweis:
Wie Sie wissen, können eMails missbräuchlich unter fremden Namen
erstellt oder verändert werden. Aus diesem Grunde bitte ich um
Verständnis dafür, daß ich zu Ihrem und meinem Schutz die
rechtliche Verbindlichkeit der in dieser eMail gemachten
Erklärungen ausschliessen muß. Diese Regelung gilt nur dann nicht,
wenn ich mit Ihnen eine anderweitige schriftliche Vereinbarung
über die Einhaltung von Sicherheits- und
Verschlüsselungstandards getroffen habe.
***********************************
Si forte in alienas manus oberraverit hec peregrina epistola
incertis ventis dimissa, sed Deo commendata, precamur ut ei
reddatur cui soli destinata, nec preripiat quisquam non sibi
parata.
[-- Attachment #2: christian.vcf --]
[-- Type: text/x-vcard, Size: 358 bytes --]
begin:vcard
fn:Christian Heidingsfelder [Heidingsfelder + Partner]
n:Heidingsfelder;Christian
org:Heidingsfelder + Partner
adr:;;Kirchgasse 9;Winterlingen-Benzingen;BW;72474;Deutschland
email;internet:christian@heidigsfelder.eu
title:CEO
tel;work:+49 7577 933 864
tel;fax:+49 7577 933 863
tel;home:+49 7577 933 862
x-mozilla-html:TRUE
version:2.1
end:vcard
[-- Attachment #3: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [linux-dvb] Technotrend TT-Connect S2-3650 CI
2008-10-13 14:52 [linux-dvb] Technotrend TT-Connect S2-3650 CI Christian Heidingsfelder [Heidingsfelder + Partner]
@ 2008-10-13 15:34 ` Faruk A
2008-10-13 16:03 ` Christian Heidingsfelder [Heidingsfelder + Partner]
2008-10-13 16:05 ` Christian Heidingsfelder [Heidingsfelder + Partner]
0 siblings, 2 replies; 16+ messages in thread
From: Faruk A @ 2008-10-13 15:34 UTC (permalink / raw)
To: christian; +Cc: linux-dvb
> Hi all,
>
> again, if somebody is
> working on
> or interested in
> that DVB-S USB Reciever with Card Interface he can msg me for informations
> or whatever :- )
>
> Regards Chris
Hi Chris!
As i told you before this card is working with multiproto with kernel
2.6.25 and under.
driver support:
- Remote Control
- LNB Power (13/18V)
- 22kHz
- DiSEqC
- DVB-S
- DVB-S2
- Common Interface
more info @ http://www.linuxtv.org/wiki/index.php/TechnoTrend_TT-connect_S2-3650_CI
and search this mailing list.
S2 API support you have to wait i think because this card depends
stb0899 and stb6100
which as far as i know is not ported yet.
Regards
Faruk
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [linux-dvb] Technotrend TT-Connect S2-3650 CI
2008-10-13 15:34 ` Faruk A
@ 2008-10-13 16:03 ` Christian Heidingsfelder [Heidingsfelder + Partner]
2008-10-13 16:05 ` Christian Heidingsfelder [Heidingsfelder + Partner]
1 sibling, 0 replies; 16+ messages in thread
From: Christian Heidingsfelder [Heidingsfelder + Partner] @ 2008-10-13 16:03 UTC (permalink / raw)
To: Faruk A; +Cc: linux-dvb
[-- Attachment #1: Type: text/plain, Size: 3059 bytes --]
Faruk A schrieb:
>> Hi all,
>>
>> again, if somebody is
>> working on
>> or interested in
>> that DVB-S USB Reciever with Card Interface he can msg me for informations
>> or whatever :- )
>>
>> Regards Chris
>>
>
> Hi Chris!
>
> As i told you before this card is working with multiproto with kernel
> 2.6.25 and under.
>
> driver support:
> - Remote Control
> - LNB Power (13/18V)
> - 22kHz
> - DiSEqC
> - DVB-S
> - DVB-S2
> - Common Interface
> more info @ http://www.linuxtv.org/wiki/index.php/TechnoTrend_TT-connect_S2-3650_CI
> and search this mailing list.
>
> S2 API support you have to wait i think because this card depends
> stb0899 and stb6100
> which as far as i know is not ported yet.
>
> Regards
> Faruk
>
--
Mit freundlichen Grüßen
Christian Heidingsfelder
+---------------------------------+--------------------------------+
| Heidingsfelder + Partner | Heidingsfelder + Partner |
| | Tel: +49 7577 933864 |
| Kirchgasse 9 | Fax: +49 7577 933863 |
| 72474 Winterlingen-Benzingen | christian@heidingsfelder.eu |
| DE | |
| | |
+---------------------------------+--------------------------------+
***********************************
Diese eMailadresse ist keine Zustelladresse.
Aus technischen Gruenden kann ich Ihre eMail nicht sofort nach
Eingang darauf überpruefen, ob sie Fristen oder Termine enthaelt.
Daher uebernehme ich keine Gewaehr, daß Ihre Nachricht so
rechtzeitig gelesen wird, daß alle zur Einhaltung von etwaigen
Fristen oder Terminen notwendigen Massnahmen ergriffen werden
koennen.
Bitte uebermitteln Sie solche Schriftstuecke per Fax oder Brief an
die weiter obenstehende Anschrift.
***********************************
Hiermit widerspreche ich ausdruecklich jeglicher Nutzung oder
Uebermittlung meiner Daten, gleichgueltig, zu welchen Zwecken oder
an welchen Empfaenger sie erfolgt. Insbesondere widerspreche ich
der Nutzung oder Uebermittlung meiner Daten fuer Werbe, Markt-
oder Meinungsforschungszwecken gemaess
§ 28 Absatz 3 Bundesdatenschutzgesetz.
***********************************
Sicherheitshinweis:
Wie Sie wissen, können eMails missbräuchlich unter fremden Namen
erstellt oder verändert werden. Aus diesem Grunde bitte ich um
Verständnis dafür, daß ich zu Ihrem und meinem Schutz die
rechtliche Verbindlichkeit der in dieser eMail gemachten
Erklärungen ausschliessen muß. Diese Regelung gilt nur dann nicht,
wenn ich mit Ihnen eine anderweitige schriftliche Vereinbarung
über die Einhaltung von Sicherheits- und
Verschlüsselungstandards getroffen habe.
***********************************
Si forte in alienas manus oberraverit hec peregrina epistola
incertis ventis dimissa, sed Deo commendata, precamur ut ei
reddatur cui soli destinata, nec preripiat quisquam non sibi
parata.
[-- Attachment #2: christian.vcf --]
[-- Type: text/x-vcard, Size: 358 bytes --]
begin:vcard
fn:Christian Heidingsfelder [Heidingsfelder + Partner]
n:Heidingsfelder;Christian
org:Heidingsfelder + Partner
adr:;;Kirchgasse 9;Winterlingen-Benzingen;BW;72474;Deutschland
email;internet:christian@heidigsfelder.eu
title:CEO
tel;work:+49 7577 933 864
tel;fax:+49 7577 933 863
tel;home:+49 7577 933 862
x-mozilla-html:TRUE
version:2.1
end:vcard
[-- Attachment #3: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [linux-dvb] Technotrend TT-Connect S2-3650 CI
2008-10-13 15:34 ` Faruk A
2008-10-13 16:03 ` Christian Heidingsfelder [Heidingsfelder + Partner]
@ 2008-10-13 16:05 ` Christian Heidingsfelder [Heidingsfelder + Partner]
2008-10-13 16:33 ` Faruk A
1 sibling, 1 reply; 16+ messages in thread
From: Christian Heidingsfelder [Heidingsfelder + Partner] @ 2008-10-13 16:05 UTC (permalink / raw)
To: Faruk A, linux-dvb
[-- Attachment #1: Type: text/plain, Size: 3335 bytes --]
Faruk A schrieb:
>> Hi all,
>>
>> again, if somebody is
>> working on
>> or interested in
>> that DVB-S USB Reciever with Card Interface he can msg me for informations
>> or whatever :- )
>>
>> Regards Chris
>>
>
> Hi Chris!
>
> As i told you before this card is working with multiproto with kernel
> 2.6.25 and under.
>
> driver support:
> - Remote Control
> - LNB Power (13/18V)
> - 22kHz
> - DiSEqC
> - DVB-S
> - DVB-S2
> - Common Interface
> more info @ http://www.linuxtv.org/wiki/index.php/TechnoTrend_TT-connect_S2-3650_CI
> and search this mailing list.
>
> S2 API support you have to wait i think because this card depends
> stb0899 and stb6100
> which as far as i know is not ported yet.
>
> Regards
> Faruk
>
Yes , i read that.
Unfortunately my hardware (Toshiba M-60 167) works perfectly with the
.26 kernel and i dont want to downgrade the kernel to .25 .
I am lucky that all works now as i a am not that linux Expert (using
gentoo since 2 Months).
Thanks for answering :-)
--
Mit freundlichen Grüßen
Christian Heidingsfelder
+---------------------------------+--------------------------------+
| Heidingsfelder + Partner | Heidingsfelder + Partner |
| | Tel: +49 7577 933864 |
| Kirchgasse 9 | Fax: +49 7577 933863 |
| 72474 Winterlingen-Benzingen | christian@heidingsfelder.eu |
| DE | |
| | |
+---------------------------------+--------------------------------+
***********************************
Diese eMailadresse ist keine Zustelladresse.
Aus technischen Gruenden kann ich Ihre eMail nicht sofort nach
Eingang darauf überpruefen, ob sie Fristen oder Termine enthaelt.
Daher uebernehme ich keine Gewaehr, daß Ihre Nachricht so
rechtzeitig gelesen wird, daß alle zur Einhaltung von etwaigen
Fristen oder Terminen notwendigen Massnahmen ergriffen werden
koennen.
Bitte uebermitteln Sie solche Schriftstuecke per Fax oder Brief an
die weiter obenstehende Anschrift.
***********************************
Hiermit widerspreche ich ausdruecklich jeglicher Nutzung oder
Uebermittlung meiner Daten, gleichgueltig, zu welchen Zwecken oder
an welchen Empfaenger sie erfolgt. Insbesondere widerspreche ich
der Nutzung oder Uebermittlung meiner Daten fuer Werbe, Markt-
oder Meinungsforschungszwecken gemaess
§ 28 Absatz 3 Bundesdatenschutzgesetz.
***********************************
Sicherheitshinweis:
Wie Sie wissen, können eMails missbräuchlich unter fremden Namen
erstellt oder verändert werden. Aus diesem Grunde bitte ich um
Verständnis dafür, daß ich zu Ihrem und meinem Schutz die
rechtliche Verbindlichkeit der in dieser eMail gemachten
Erklärungen ausschliessen muß. Diese Regelung gilt nur dann nicht,
wenn ich mit Ihnen eine anderweitige schriftliche Vereinbarung
über die Einhaltung von Sicherheits- und
Verschlüsselungstandards getroffen habe.
***********************************
Si forte in alienas manus oberraverit hec peregrina epistola
incertis ventis dimissa, sed Deo commendata, precamur ut ei
reddatur cui soli destinata, nec preripiat quisquam non sibi
parata.
[-- Attachment #2: christian.vcf --]
[-- Type: text/x-vcard, Size: 358 bytes --]
begin:vcard
fn:Christian Heidingsfelder [Heidingsfelder + Partner]
n:Heidingsfelder;Christian
org:Heidingsfelder + Partner
adr:;;Kirchgasse 9;Winterlingen-Benzingen;BW;72474;Deutschland
email;internet:christian@heidigsfelder.eu
title:CEO
tel;work:+49 7577 933 864
tel;fax:+49 7577 933 863
tel;home:+49 7577 933 862
x-mozilla-html:TRUE
version:2.1
end:vcard
[-- Attachment #3: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [linux-dvb] Technotrend TT-Connect S2-3650 CI
2008-10-13 16:05 ` Christian Heidingsfelder [Heidingsfelder + Partner]
@ 2008-10-13 16:33 ` Faruk A
2008-10-13 16:54 ` Christian Heidingsfelder [Heidingsfelder + Partner]
0 siblings, 1 reply; 16+ messages in thread
From: Faruk A @ 2008-10-13 16:33 UTC (permalink / raw)
To: christian; +Cc: linux-dvb
> Yes , i read that.
> Unfortunately my hardware (Toshiba M-60 167) works perfectly with the .26
> kernel and i dont want to downgrade the kernel to .25 .
> I am lucky that all works now as i a am not that linux Expert (using
> gentoo since 2 Months).
> Thanks for answering :-)
> --
Unfortunately there has been changes with linux-dvb this past 2-3 weeks they
switched api from multiproto to S2, so we have to wait untill someone port the
drivers.
The old drivers is for multiproto and i don't think they will get
support for the latest
and future kernels.
But you can try talking to "Dominik Kuhlen", dkuhlen (at) gmx.net he
wrote the driver
maybe he can provide a patch to support latest kernels.
Try "Michael H. Schimek" too mschimek (at) gmx.at he wrote the Common
Interface support.
Faruk
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [linux-dvb] Technotrend TT-Connect S2-3650 CI
2008-10-13 16:33 ` Faruk A
@ 2008-10-13 16:54 ` Christian Heidingsfelder [Heidingsfelder + Partner]
0 siblings, 0 replies; 16+ messages in thread
From: Christian Heidingsfelder [Heidingsfelder + Partner] @ 2008-10-13 16:54 UTC (permalink / raw)
To: Faruk A; +Cc: linux-dvb
[-- Attachment #1: Type: text/plain, Size: 952 bytes --]
Faruk A schrieb:
>> Yes , i read that.
>> Unfortunately my hardware (Toshiba M-60 167) works perfectly with the .26
>> kernel and i dont want to downgrade the kernel to .25 .
>> I am lucky that all works now as i a am not that linux Expert (using
>> gentoo since 2 Months).
>> Thanks for answering :-)
>> --
>>
>
> Unfortunately there has been changes with linux-dvb this past 2-3 weeks they
> switched api from multiproto to S2, so we have to wait untill someone port the
> drivers.
> The old drivers is for multiproto and i don't think they will get
> support for the latest
> and future kernels.
> But you can try talking to "Dominik Kuhlen", dkuhlen (at) gmx.net he
> wrote the driver
> maybe he can provide a patch to support latest kernels.
> Try "Michael H. Schimek" too mschimek (at) gmx.at he wrote the Common
> Interface support.
>
> Faruk
>
I wrote him some secs ago :-)
Lets wait :-)
Thanks again for answering.
Regards chris
[-- Attachment #2: christian.vcf --]
[-- Type: text/x-vcard, Size: 358 bytes --]
begin:vcard
fn:Christian Heidingsfelder [Heidingsfelder + Partner]
n:Heidingsfelder;Christian
org:Heidingsfelder + Partner
adr:;;Kirchgasse 9;Winterlingen-Benzingen;BW;72474;Deutschland
email;internet:christian@heidigsfelder.eu
title:CEO
tel;work:+49 7577 933 864
tel;fax:+49 7577 933 863
tel;home:+49 7577 933 862
x-mozilla-html:TRUE
version:2.1
end:vcard
[-- Attachment #3: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 16+ messages in thread
* [linux-dvb] Technotrend TT-Connect S2-3650 CI
@ 2008-10-20 19:28 Christian Heidingsfelder [Heidingsfelder + Partner]
2008-10-20 20:56 ` Igor M. Liplianin
0 siblings, 1 reply; 16+ messages in thread
From: Christian Heidingsfelder [Heidingsfelder + Partner] @ 2008-10-20 19:28 UTC (permalink / raw)
To: linux-dvb
[-- Attachment #1: Type: text/plain, Size: 12088 bytes --]
Hi all,
after getting this url
http://www.linuxtv.org/wiki/index.php/TechnoTrend_TT-connect_S2-3650_CI
from faruk i tried to install the modules for my technotrend.
Heres the hole session :
-------------------
scheffe@scheffenote ~ $ mkdir 3650
scheffe@scheffenote ~ $ cd 3650/
scheffe@scheffenote ~/3650 $ hg clone -r 9263
http://mercurial.intuxication.org/hg/s2-liplianin
destination directory: s2-liplianin
requesting all changes
adding changesets
adding manifests
adding file changes
added 9264 changesets with 24422 changes to 1647 files
updating working directory
1189 files updated, 0 files merged, 0 files removed, 0 files unresolved
scheffe@scheffenote ~/3650 $ wget
http://hem.passagen.se/faruks/3650/my_s2api_pctv452e.txt
--2008-10-20 19:14:13--
http://hem.passagen.se/faruks/3650/my_s2api_pctv452e.txt
Auflösen des Hostnamen »hem.passagen.se«.... 80.76.152.146
Verbindungsaufbau zu hem.passagen.se|80.76.152.146|:80... verbunden.
HTTP Anforderung gesendet, warte auf Antwort... 200 OK
Länge: 43373 (42K) [text/plain]
In »my_s2api_pctv452e.txt« speichern.
100%[======================================>] 43.373 106K/s in
0,4s
2008-10-20 19:14:14 (106 KB/s) - »my_s2api_pctv452e.txt« gespeichert
[43373/43373]
scheffe@scheffenote ~/3650 $ cd s2-liplianin/
scheffe@scheffenote ~/3650/s2-liplianin $ patch -p1 <
../my_s2api_pctv452e.txt
patching file linux/drivers/media/dvb/dvb-usb/pctv452e.c
patching file linux/drivers/media/dvb/frontends/lnbp22.c
patching file linux/drivers/media/dvb/frontends/stb0899_algo.c
patching file linux/drivers/media/dvb/frontends/stb0899_drv.c
patching file linux/drivers/media/dvb/frontends/stb0899_drv.h
patching file linux/drivers/media/dvb/frontends/stb0899_priv.h
patching file linux/drivers/media/dvb/frontends/stb6100.c
patching file linux/drivers/media/dvb/frontends/stb6100.h
patching file linux/drivers/media/dvb/frontends/stb6100_cfg.h
patching file linux/include/linux/dvb/frontend.h
scheffe@scheffenote ~/3650/s2-liplianin $ cd v4l
scheffe@scheffenote ~/3650/s2-liplianin/v4l $ nano .config
scheffe@scheffenote ~/3650/s2-liplianin/v4l $ cd ..
scheffe@scheffenote ~/3650/s2-liplianin $ make
make -C /home/scheffe/3650/s2-liplianin/v4l
make[1]: Entering directory `/home/scheffe/3650/s2-liplianin/v4l'
No version yet, using 2.6.27-gentoo
make[1]: Leaving directory `/home/scheffe/3650/s2-liplianin/v4l'
make[1]: Entering directory `/home/scheffe/3650/s2-liplianin/v4l'
scripts/make_makefile.pl
Updating/Creating .config
./scripts/make_kconfig.pl /lib/modules/2.6.27-gentoo/build
/lib/modules/2.6.27-gentoo/source
Preparing to compile for kernel version 2.6.27
./scripts/make_myconfig.pl
make[1]: Leaving directory `/home/scheffe/3650/s2-liplianin/v4l'
make[1]: Entering directory `/home/scheffe/3650/s2-liplianin/v4l'
perl scripts/make_config_compat.pl /lib/modules/2.6.27-gentoo/source
./.myconfig ./config-compat.h
creating symbolic links...
ln -sf . oss
Kernel build directory is /lib/modules/2.6.27-gentoo/build
make -C /lib/modules/2.6.27-gentoo/build
SUBDIRS=/home/scheffe/3650/s2-liplianin/v4l modules
make[2]: Entering directory `/usr/src/linux-2.6.27-gentoo'
CC [M] /home/scheffe/3650/s2-liplianin/v4l/dvbdev.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/dmxdev.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/dvb_demux.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/dvb_filter.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/dvb_ca_en50221.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/dvb_frontend.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/dvb_net.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/dvb_ringbuffer.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/dvb_math.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/pctv452e.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/dvb-usb-firmware.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/dvb-usb-init.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/dvb-usb-urb.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/dvb-usb-i2c.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/dvb-usb-dvb.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/dvb-usb-remote.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/usb-urb.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/stb0899_drv.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/stb0899_algo.o
LD [M] /home/scheffe/3650/s2-liplianin/v4l/dvb-core.o
LD [M] /home/scheffe/3650/s2-liplianin/v4l/stb0899.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/stb6100.o
/home/scheffe/3650/s2-liplianin/v4l/stb6100.c: In function
'stb6100_set_params':
/home/scheffe/3650/s2-liplianin/v4l/stb6100.c:486: warning: unused
variable 'state'
CC [M] /home/scheffe/3650/s2-liplianin/v4l/lnbp22.o
CC [M] /home/scheffe/3650/s2-liplianin/v4l/ttpci-eeprom.o
LD [M] /home/scheffe/3650/s2-liplianin/v4l/dvb-usb.o
LD [M] /home/scheffe/3650/s2-liplianin/v4l/dvb-usb-pctv452e.o
Building modules, stage 2.
MODPOST 7 modules
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_unregister_adapter' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_register_adapter' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_unregister_device' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_register_device' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_generic_ioctl' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_generic_release' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_generic_open' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_dmxdev_release' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core: 'dvb_dmxdev_init'
exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core: 'dvb_dmx_release'
exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core: 'dvb_dmx_init'
exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_dmx_swfilter_204' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_dmx_swfilter' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_dmx_swfilter_packets' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_filter_pes2ts' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_filter_pes2ts_init' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_filter_get_ac3info' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_ca_en50221_release' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_ca_en50221_init' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_ca_en50221_frda_irq' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_ca_en50221_camready_irq' exported twice. Previous export was in
vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_ca_en50221_camchange_irq' exported twice. Previous export was in
vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_frontend_detach' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_unregister_frontend' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_register_frontend' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_frontend_sleep_until' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'timeval_usec_diff' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_frontend_reinitialise' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core: 'dvb_net_init'
exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core: 'dvb_net_release'
exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_ringbuffer_write' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_ringbuffer_read' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_ringbuffer_read_user' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_ringbuffer_flush_spinlock_wakeup' exported twice. Previous export
was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_ringbuffer_avail' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_ringbuffer_free' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_ringbuffer_empty' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core:
'dvb_ringbuffer_init' exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core: 'intlog10'
exported twice. Previous export was in vmlinux
WARNING: /home/scheffe/3650/s2-liplianin/v4l/dvb-core: 'intlog2'
exported twice. Previous export was in vmlinux
CC /home/scheffe/3650/s2-liplianin/v4l/dvb-core.mod.o
LD [M] /home/scheffe/3650/s2-liplianin/v4l/dvb-core.ko
CC /home/scheffe/3650/s2-liplianin/v4l/dvb-usb-pctv452e.mod.o
LD [M] /home/scheffe/3650/s2-liplianin/v4l/dvb-usb-pctv452e.ko
CC /home/scheffe/3650/s2-liplianin/v4l/dvb-usb.mod.o
LD [M] /home/scheffe/3650/s2-liplianin/v4l/dvb-usb.ko
CC /home/scheffe/3650/s2-liplianin/v4l/lnbp22.mod.o
LD [M] /home/scheffe/3650/s2-liplianin/v4l/lnbp22.ko
CC /home/scheffe/3650/s2-liplianin/v4l/stb0899.mod.o
LD [M] /home/scheffe/3650/s2-liplianin/v4l/stb0899.ko
CC /home/scheffe/3650/s2-liplianin/v4l/stb6100.mod.o
LD [M] /home/scheffe/3650/s2-liplianin/v4l/stb6100.ko
CC /home/scheffe/3650/s2-liplianin/v4l/ttpci-eeprom.mod.o
LD [M] /home/scheffe/3650/s2-liplianin/v4l/ttpci-eeprom.ko
make[2]: Leaving directory `/usr/src/linux-2.6.27-gentoo'
./scripts/rmmod.pl check
found 7 modules
make[1]: Leaving directory `/home/scheffe/3650/s2-liplianin/v4l'
scheffe@scheffenote ~/3650/s2-liplianin $ su
SSH passphrase:
scheffenote s2-liplianin # insmod dvb-core.ko
insmod: can't read 'dvb-core.ko': No such file or directory
scheffenote s2-liplianin # cd v4l
scheffenote v4l # insmod dvb-core.ko
insmod: error inserting 'dvb-core.ko': -1 Invalid parameters
scheffenote v4l # insmod stb6100.ko verbose=0
scheffenote v4l # insmod stb0899.ko verbose=0
scheffenote v4l # insmod lnbp22.ko
scheffenote v4l # insmod ttpci-eeprom.ko
scheffenote v4l # insmod dvb-usb.ko
insmod: error inserting 'dvb-usb.ko': -1 Unknown symbol in module
scheffenote v4l # insmod dvb-usb-pctv452e.ko
insmod: error inserting 'dvb-usb-pctv452e.ko': -1 Unknown symbol in module
----------------------------
----------------------------
lsmod :
http://rafb.net/p/zFADSp45.html
---------------------------
Many thanks to Igor and Dominik for dealing with that and to faruk for
dealing with me :-)
If you need more infos , let me know
Regards Chris
[-- Attachment #2: christian.vcf --]
[-- Type: text/x-vcard, Size: 358 bytes --]
begin:vcard
fn:Christian Heidingsfelder [Heidingsfelder + Partner]
n:Heidingsfelder;Christian
org:Heidingsfelder + Partner
adr:;;Kirchgasse 9;Winterlingen-Benzingen;BW;72474;Deutschland
email;internet:christian@heidigsfelder.eu
title:CEO
tel;work:+49 7577 933 864
tel;fax:+49 7577 933 863
tel;home:+49 7577 933 862
x-mozilla-html:TRUE
version:2.1
end:vcard
[-- Attachment #3: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [linux-dvb] Technotrend TT-Connect S2-3650 CI
2008-10-20 19:28 Christian Heidingsfelder [Heidingsfelder + Partner]
@ 2008-10-20 20:56 ` Igor M. Liplianin
2008-10-21 13:07 ` Christian Heidingsfelder [Heidingsfelder + Partner]
0 siblings, 1 reply; 16+ messages in thread
From: Igor M. Liplianin @ 2008-10-20 20:56 UTC (permalink / raw)
To: linux-dvb, christian
В сообщении от 20 October 2008 22:28:37 Christian Heidingsfelder [Heidingsfelder + Partner]
написал(а):
> Previous export was in vmlinux
Hi Christian,
It means you have compiled in kernel (vmlinux) dvb-core, not like module.
You need recompile kernel with dvb-core configured like module.
Igor
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [linux-dvb] Technotrend TT-Connect S2-3650 CI
2008-10-20 20:56 ` Igor M. Liplianin
@ 2008-10-21 13:07 ` Christian Heidingsfelder [Heidingsfelder + Partner]
0 siblings, 0 replies; 16+ messages in thread
From: Christian Heidingsfelder [Heidingsfelder + Partner] @ 2008-10-21 13:07 UTC (permalink / raw)
To: Igor M. Liplianin; +Cc: linux-dvb
[-- Attachment #1: Type: text/plain, Size: 508 bytes --]
Igor M. Liplianin schrieb:
> В сообщении от 20 October 2008 22:28:37 Christian Heidingsfelder [Heidingsfelder + Partner]
> написал(а):
>
>> Previous export was in vmlinux
>>
> Hi Christian,
>
> It means you have compiled in kernel (vmlinux) dvb-core, not like module.
> You need recompile kernel with dvb-core configured like module.
>
> Igor
>
lol , i knew that it was me :-)
Yes now it works wonderful.
Thanks again to you and anyone who was involved in that .
Regards chris
[-- Attachment #2: christian.vcf --]
[-- Type: text/x-vcard, Size: 358 bytes --]
begin:vcard
fn:Christian Heidingsfelder [Heidingsfelder + Partner]
n:Heidingsfelder;Christian
org:Heidingsfelder + Partner
adr:;;Kirchgasse 9;Winterlingen-Benzingen;BW;72474;Deutschland
email;internet:christian@heidigsfelder.eu
title:CEO
tel;work:+49 7577 933 864
tel;fax:+49 7577 933 863
tel;home:+49 7577 933 862
x-mozilla-html:TRUE
version:2.1
end:vcard
[-- Attachment #3: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 16+ messages in thread
* [linux-dvb] TechnoTrend TT-connect S2-3650 CI
@ 2009-08-11 18:32 Christopher Thornley
[not found] ` <!&!AAAAAAAAAAAYAAAAAAAAAMs7WpTkg9MRuRcAACHFyB/CgAAAEAAAAJQ52z3qEFtDsl72y5 icHrgBAAAAAA==@coolrose.fsnet.co.uk>
2009-08-12 19:30 ` Jens Nixdorf
0 siblings, 2 replies; 16+ messages in thread
From: Christopher Thornley @ 2009-08-11 18:32 UTC (permalink / raw)
To: linux-dvb
Hi,
I was wondering if you could help me. I am fairly new to using Linux so be a
bit patient with me and please explain things that might not be obvious to
me.
I have an "ASUS n80vc" Laptop which I have installed Ubuntu 9.04 Desktop
64bit.
I also have 2 USB DVB devices :-
Technotrend tt-connect S2-3650 CI (DVB-S and DVB-S2)
Technotrend tt-connect CT-3650 CI (DVB-T and DVB-C)
I am trying to get these to work with my machine.
I believe I need to some how to get these operating with something like
MythTV or Video4Linux or VDR with a software decoder.
So far I have tried to install a few packages via the synaptic installer but
so far non have work successfully with my devices.
I then did a little searching around and stumbled across this page
http://www.linuxtv.org/wiki/index.php/TechnoTrend_TT-connect_S2-3650_CI
I think these are drivers or interfaces for my devices.
I have followed the instructions for both S2API and Multiproto.
S2API installation seemed to be successful but I have no way of confirming
this. I had to "Sudo insmod" the modules to install them. I am not to sure
if they will survive a reboot or will I have to install them again. These
appear to install without any complaints.
Multiproto installation did not seem to be entirely successful. I followed
the instructions but the modules are not found when I arrive at the insmod
stage. I suspect they did not compile successfully. I am clueless as how to
get these to work.
This is the output I received from the make command and I am not sure if
this will shed some light on the matter.
system@Firefly:~/3650/multiproto$ make
make -C /home/system/3650/multiproto/v4l
make[1]: Entering directory `/home/system/3650/multiproto/v4l'
creating symbolic links...
Kernel build directory is /lib/modules/2.6.28-14-generic/build
make -C /lib/modules/2.6.28-14-generic/build
SUBDIRS=/home/system/3650/multiproto/v4l modules
make[2]: Entering directory `/usr/src/linux-headers-2.6.28-14-generic'
CC [M] /home/system/3650/multiproto/v4l/cx25840-core.o
In file included from /home/system/3650/multiproto/v4l/cx25840-core.c:42:
/home/system/3650/multiproto/v4l/../linux/include/media/v4l2-i2c-drv-legacy.
h: In function 'v4l2_i2c_drv_init':
/home/system/3650/multiproto/v4l/../linux/include/media/v4l2-i2c-drv-legacy.
h:197: warning: assignment from incompatible pointer type
/home/system/3650/multiproto/v4l/cx25840-core.c: At top level:
/home/system/3650/multiproto/v4l/cx25840-core.c:71: error: conflicting type
qualifiers for 'addr_data'
/home/system/3650/multiproto/v4l/../linux/include/media/v4l2-i2c-drv-legacy.
h:41: error: previous declaration of 'addr_data' was here
make[3]: *** [/home/system/3650/multiproto/v4l/cx25840-core.o] Error 1
make[2]: *** [_module_/home/system/3650/multiproto/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-headers-2.6.28-14-generic'
make[1]: *** [default] Error 2
make[1]: Leaving directory `/home/system/3650/multiproto/v4l'
make: *** [all] Error 2
system@Firefly:~/3650/multiproto$
I probably would like to get both the S2API and Multiprot methods working.
The article also mentions that there is a "patched version of szap available
(search mailing list). " I presume this is the correct place to look but
some pointers and installation instructions would be helpful to me.
If I get the S2API and Multiprot installed how do I use them to tune into,
watch and download Mpeg Transport streams from DVB? Do they support multipul
devices plugged in at once and the use of the CI interface?
Any advise to the next stage would be gratefully appreciated.
Many Thanks
Chris
/> Christopher J. Thornley is cjt@coolrose.fsnet.co.uk
( //------------------------------------------------------,
(*)OXOXOXOXO(*>=*=O=S=U=0=3=6=*=--------- >
( \\------------------------------------------------------'
\> Home Page :-http://www.coolrose.fsnet.co.uk
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [linux-dvb] TechnoTrend TT-connect S2-3650 CI
[not found] ` <!&!AAAAAAAAAAAYAAAAAAAAAMs7WpTkg9MRuRcAACHFyB/CgAAAEAAAAJQ52z3qEFtDsl72y5 icHrgBAAAAAA==@coolrose.fsnet.co.uk>
@ 2009-08-11 19:06 ` Niels Wagenaar
2009-08-12 23:30 ` Christopher Thornley
0 siblings, 1 reply; 16+ messages in thread
From: Niels Wagenaar @ 2009-08-11 19:06 UTC (permalink / raw)
To: linux-media
Op Di, 11 augustus, 2009 20:32, schreef Christopher Thornley:
> -- SNIP --
>
> I probably would like to get both the S2API and Multiprot methods
> working.
>
> Many Thanks
> Chris
That won't be possible. It's S2API or Multiproto. And since S2API is the
official standard - besides the fact that Multiproto is old and absolete -
you should forget about Multiproto.
So in short, your DVB devices should be used using the S2API drivers. You
can use v4l or s2-liplianin (I use s2-liplianin myself) which are both
S2API. Only v4l is the official tree while s2-liplianin is more
experimental. After fetching v4l or s2-liplianin you can easily install
them for your kernel using: make ; make install ; reboot.
Then check if your cards were detected using dmesg (it should tell you
information if the DVB devices were detected) and you can check /dev/dvb.
You should have two folders containing adapter0 and adapter1.
Normally, a simple check would be to use a DVB application like Kaffeine.
Alternatively you can use MythTV 0.22 (which supports S2API), VDR 1.7.0
with my S2API patch or VDR 1.7.4 or higher (latest version is 1.7.8).
Regards,
Niels Wagenaar
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [linux-dvb] TechnoTrend TT-connect S2-3650 CI
2009-08-11 18:32 [linux-dvb] TechnoTrend TT-connect " Christopher Thornley
[not found] ` <!&!AAAAAAAAAAAYAAAAAAAAAMs7WpTkg9MRuRcAACHFyB/CgAAAEAAAAJQ52z3qEFtDsl72y5 icHrgBAAAAAA==@coolrose.fsnet.co.uk>
@ 2009-08-12 19:30 ` Jens Nixdorf
2009-09-04 8:29 ` Harald Milz
1 sibling, 1 reply; 16+ messages in thread
From: Jens Nixdorf @ 2009-08-12 19:30 UTC (permalink / raw)
To: linux-dvb
Am Dienstag 11 August 2009 schrieb Christopher Thornley:
> S2API installation seemed to be successful but I have no way of
> confirming this. I had to "Sudo insmod" the modules to install them. I
> am not to sure if they will survive a reboot or will I have to install
> them again. These appear to install without any complaints.
>
> Multiproto installation did not seem to be entirely successful. I
> followed the instructions but the modules are not found when I arrive
> at the insmod stage. I suspect they did not compile successfully. I am
> clueless as how to get these to work.
As Niels told you already, you cant use both types of driver. I own the
same DVB-S2-Box from Technotrend and i'm using it with VDR 1.7.0 in
ubuntu 9.04. I was following the wiki for installing s2-liplianin-
drivers, and since this time the box is running including its CI.
Maybe there could be some optimization (the log is full with some
bandwisth-messages from the stb6100-part), but it works at least good
enough for me.
To your dvb-t-box i have nothing to say, because of my lack of knowledge
;)
regards, Jens
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 16+ messages in thread
* RE: [linux-dvb] TechnoTrend TT-connect S2-3650 CI
2009-08-11 19:06 ` Niels Wagenaar
@ 2009-08-12 23:30 ` Christopher Thornley
[not found] ` <!&!AAAAAAAAAAAYAAAAAAAAAMs7WpTkg9MRuRcAACHFyB/CgAAAEAAAACcjVxFMux1AotUWOp 7nrWEBAAAAAA==@coolrose.fsnet.co.uk>
0 siblings, 1 reply; 16+ messages in thread
From: Christopher Thornley @ 2009-08-12 23:30 UTC (permalink / raw)
To: n.wagenaar, linux-media
[-- Attachment #1: Type: text/plain, Size: 2392 bytes --]
Hi,
I have now successfully installed the S2API and s2-liplianin (Thank for the
link Goga777)
On checking /dev/dvb I now have adapter0, adapter1 and adapter2 (DVB-S,
DVB-C, DVB-T)
Find attached my current dsmeg.txt file.
I have installed Kaffeine and this is currently taking an age to scan for
MUX's @ Winter Hill.
I am seeing some strong signal indications but no channels/pids/pats etc are
being detected.
I have tried setting the adapter up in MythTV. Although it sees the device
and I can select from 0 1 2 units the program freezes when I make a
selection.
I have tried to build (make) several versions of VDR from version 1.7.4 to
1.7.8 but I am receiving the following error message which I don't know what
to do to resolve this :-
system@Firefly:~/dvb/vdr-1.7.8$ make
g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -c -DREMOTE_KBD
-DLIRC_DEVICE=\"/dev/lircd\" -DRCU_DEVICE=\"/dev/ttyS1\" -D_GNU_SOURCE
-D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE
-DVIDEODIR=\"/video\" -DCONFDIR=\"/video\" -DPLUGINDIR=\"./PLUGINS/lib\"
-DLOCDIR=\"./locale\" -I/usr/include/freetype2 dvbdevice.c
dvbdevice.c: In constructor 'cDvbDevice::cDvbDevice(int)':
dvbdevice.c:487: error: 'FE_CAN_2G_MODULATION' was not declared in this
scope
make: *** [dvbdevice.o] Error 1
system@Firefly:~/dvb/vdr-1.7.8$
Many Thanks
Chris
/> Christopher J. Thornley is cjt@coolrose.fsnet.co.uk
( //------------------------------------------------------,
(*)OXOXOXOXO(*>=*=O=S=U=0=3=6=*=--------- >
( \\------------------------------------------------------'
\> Home Page :-http://www.coolrose.fsnet.co.uk
-----Original Message-----
From: linux-media-owner@vger.kernel.org
[mailto:linux-media-owner@vger.kernel.org] On Behalf Of Niels Wagenaar
Sent: 11 August 2009 20:07
To: linux-media@vger.kernel.org
Subject: Re: [linux-dvb] TechnoTrend TT-connect S2-3650 CI
Then check if your cards were detected using dmesg (it should tell you
information if the DVB devices were detected) and you can check /dev/dvb.
You should have two folders containing adapter0 and adapter1.
Normally, a simple check would be to use a DVB application like Kaffeine.
Alternatively you can use MythTV 0.22 (which supports S2API), VDR 1.7.0 with
my S2API patch or VDR 1.7.4 or higher (latest version is 1.7.8).
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 55537 bytes --]
[ 0.000000] BIOS EBDA/lowmem at: 0009ec00/0009ec00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-14-generic (buildd@yellow) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #47-Ubuntu SMP Sat Jul 25 01:19:55 UTC 2009 (Ubuntu 2.6.28-14.47-generic)
[ 0.000000] Command line: root=UUID=387af4e1-0619-49df-b36d-7e50dfaa6415 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e1000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff80000 (usable)
[ 0.000000] BIOS-e820: 00000000bff80000 - 00000000bff8f000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bff8f000 - 00000000bffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x3ffffffff
[ 0.000000] last_pfn = 0xbff80 max_arch_pfn = 0x3ffffffff
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable)
[ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e1000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bff80000 (usable)
[ 0.000000] modified: 00000000bff80000 - 00000000bff8f000 (ACPI data)
[ 0.000000] modified: 00000000bff8f000 - 00000000bffe0000 (ACPI NVS)
[ 0.000000] modified: 00000000bffe0000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000fed40000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bff80000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bff80000 page 4k
[ 0.000000] kernel direct mapping tables up to bff80000 @ 10000-15000
[ 0.000000] last_map_addr: bff80000 end: bff80000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ 13000-19000
[ 0.000000] last_map_addr: 140000000 end: 140000000
[ 0.000000] RAMDISK: 37858000 - 37fef2f5
[ 0.000000] ACPI: RSDP 000F9350, 0024 (r2 ACPIAM)
[ 0.000000] ACPI: XSDT BFF80100, 0084 (r1 _ASUS_ Notebook 20081031 MSFT 97)
[ 0.000000] ACPI: FACP BFF80290, 00F4 (r3 103108 FACP0921 20081031 MSFT 97)
[ 0.000000] ACPI: DSDT BFF80680, B844 (r1 N80Vc N80Vc207 207 INTL 20081204)
[ 0.000000] ACPI: FACS BFF8F000, 0040
[ 0.000000] ACPI: APIC BFF80390, 005C (r1 103108 APIC0921 20081031 MSFT 97)
[ 0.000000] ACPI: MCFG BFF80430, 003C (r1 103108 OEMMCFG 20081031 MSFT 97)
[ 0.000000] ACPI: SLIC BFF80470, 0176 (r1 _ASUS_ Notebook 20081031 MSFT 97)
[ 0.000000] ACPI: ECDT BFF80620, 0054 (r1 103108 OEMECDT 20081031 MSFT 97)
[ 0.000000] ACPI: DBGP BFF803F0, 0034 (r1 103108 DBGP0921 20081031 MSFT 97)
[ 0.000000] ACPI: BOOT BFF805F0, 0028 (r1 103108 BOOT0921 20081031 MSFT 97)
[ 0.000000] ACPI: OEMB BFF8F040, 0071 (r1 103108 OEMB0921 20081031 MSFT 97)
[ 0.000000] ACPI: HPET BFF8BF30, 0038 (r1 103108 OEMHPET 20081031 MSFT 97)
[ 0.000000] ACPI: DMAR BFF8F0C0, 0108 (r1 103108 DMAR0921 20081031 MSFT 97)
[ 0.000000] ACPI: ATKG BFF8F3D0, 8024 (r1 103108 OEMATKG 20081031 MSFT 97)
[ 0.000000] ACPI: SSDT BFF97F20, 04F0 (r1 PmRef CpuPm 3000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000b7bbb0] TEXT DATA BSS ==> [0000200000 - 0000b7bbb0]
[ 0.000000] #3 [0037858000 - 0037fef2f5] RAMDISK ==> [0037858000 - 0037fef2f5]
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
[ 0.000000] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] #6 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780
[ 0.000000] [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bff80
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1048334
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2533 pages reserved
[ 0.000000] DMA zone: 1393 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767928 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000
[ 0.000000] PM: Registered nosave memory: 00000000000e1000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bff80000 - 00000000bff8f000
[ 0.000000] PM: Registered nosave memory: 00000000bff8f000 - 00000000bffe0000
[ 0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
[ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3ed20000)
[ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1027881
[ 0.000000] Kernel command line: root=UUID=387af4e1-0619-49df-b36d-7e50dfaa6415 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.248 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] allocated 52428800 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing software IO TLB between 0x20000000 - 0x24000000
[ 0.004000] Memory: 3979556k/5242880k available (4748k kernel code, 1049544k absent, 212828k reserved, 2524k data, 532k init)
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.49 BogoMIPS (lpj=7980992)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] ACPI: Core revision 20080926
[ 0.006474] ACPI: Checking initramfs for custom DSDT
[ 0.348046] Setting APIC routing to flat
[ 0.348415] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.391319] CPU0: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz stepping 0d
[ 0.392001] APIC calibration not consistent with PM Timer: 159ms instead of 100ms
[ 0.392001] APIC delta adjusted to PM-Timer: 1246874 (1994967)
[ 0.392001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3989.97 BogoMIPS (lpj=7979942)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.476455] CPU1: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz stepping 0d
[ 0.476480] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.480467] Brought up 2 CPUs
[ 0.480469] Total of 2 processors activated (7980.46 BogoMIPS).
[ 0.480515] CPU0 attaching sched-domain:
[ 0.480518] domain 0: span 0-1 level MC
[ 0.480520] groups: 0 1
[ 0.480525] CPU1 attaching sched-domain:
[ 0.480527] domain 0: span 0-1 level MC
[ 0.480529] groups: 1 0
[ 0.480591] net_namespace: 1400 bytes
[ 0.480591] Booting paravirtualized kernel on bare hardware
[ 0.480591] Time: 19:31:49 Date: 08/12/09
[ 0.480591] regulator: core version 0.5
[ 0.480591] NET: Registered protocol family 16
[ 0.480591] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.480591] ACPI: bus type pci registered
[ 0.480591] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.480591] PCI: Not using MMCONFIG.
[ 0.480591] PCI: Using configuration type 1 for base access
[ 0.481448] ACPI: EC: EC description table is found, configuring boot EC
[ 0.489049] ACPI: BIOS _OSI(Linux) query ignored
[ 0.498600] ACPI: Interpreter enabled
[ 0.498603] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.498626] ACPI: Using IOAPIC for interrupt routing
[ 0.498757] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.503285] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.513530] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.525861] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.525863] ACPI: EC: driver started in poll mode
[ 0.526129] ACPI: No dock devices found.
[ 0.526235] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.526331] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.526334] pci 0000:00:01.0: PME# disabled
[ 0.526426] pci 0000:00:1a.0: reg 20 io port: [0xbc00-0xbc1f]
[ 0.526504] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f]
[ 0.526582] pci 0000:00:1a.2: reg 20 io port: [0xb800-0xb81f]
[ 0.526664] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf7fffc00-0xf7ffffff]
[ 0.526711] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.526715] pci 0000:00:1a.7: PME# disabled
[ 0.526768] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7ff8000-0xf7ffbfff]
[ 0.526803] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.526808] pci 0000:00:1b.0: PME# disabled
[ 0.526866] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.526870] pci 0000:00:1c.0: PME# disabled
[ 0.526930] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.526934] pci 0000:00:1c.1: PME# disabled
[ 0.526993] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.526997] pci 0000:00:1c.2: PME# disabled
[ 0.527060] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.527064] pci 0000:00:1c.5: PME# disabled
[ 0.527131] pci 0000:00:1d.0: reg 20 io port: [0xb480-0xb49f]
[ 0.527209] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
[ 0.527288] pci 0000:00:1d.2: reg 20 io port: [0xb080-0xb09f]
[ 0.527370] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7fff800-0xf7fffbff]
[ 0.527416] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.527421] pci 0000:00:1d.7: PME# disabled
[ 0.527621] pci 0000:00:1f.2: reg 10 io port: [0xb000-0xb007]
[ 0.527628] pci 0000:00:1f.2: reg 14 io port: [0xac00-0xac03]
[ 0.527635] pci 0000:00:1f.2: reg 18 io port: [0xa880-0xa887]
[ 0.527642] pci 0000:00:1f.2: reg 1c io port: [0xa800-0xa803]
[ 0.527648] pci 0000:00:1f.2: reg 20 io port: [0xa480-0xa49f]
[ 0.527655] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7fff000-0xf7fff7ff]
[ 0.527672] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.527676] pci 0000:00:1f.2: PME# disabled
[ 0.527761] pci 0000:01:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
[ 0.527778] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.527796] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.527805] pci 0000:01:00.0: reg 24 io port: [0xcc00-0xcc7f]
[ 0.527815] pci 0000:01:00.0: reg 30 32bit mmio: [0xfafe0000-0xfaffffff]
[ 0.527892] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[ 0.527895] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.527900] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.528024] pci 0000:03:00.0: reg 10 64bit mmio: [0xfcff0000-0xfcffffff]
[ 0.528074] pci 0000:03:00.0: supports D1
[ 0.528076] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.528081] pci 0000:03:00.0: PME# disabled
[ 0.528149] pci 0000:00:1c.1: bridge 32bit mmio: [0xfcf00000-0xfcffffff]
[ 0.528205] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
[ 0.528209] pci 0000:00:1c.2: bridge 32bit mmio: [0xfd000000-0xfddfffff]
[ 0.528216] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4000000-0xf6efffff]
[ 0.528271] pci 0000:06:00.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.528295] pci 0000:06:00.0: reg 18 64bit mmio: [0xf6fff000-0xf6ffffff]
[ 0.528311] pci 0000:06:00.0: reg 20 64bit mmio: [0xf6fe0000-0xf6feffff]
[ 0.528321] pci 0000:06:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.528334] pci 0000:06:00.0: supports D1 D2
[ 0.528336] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.528341] pci 0000:06:00.0: PME# disabled
[ 0.528409] pci 0000:00:1c.5: bridge io port: [0xe000-0xefff]
[ 0.528414] pci 0000:00:1c.5: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.528421] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xf6f00000-0xf6ffffff]
[ 0.528466] pci 0000:07:03.0: reg 10 32bit mmio: [0xfdfff800-0xfdffffff]
[ 0.528512] pci 0000:07:03.0: PME# supported from D0 D3hot D3cold
[ 0.528517] pci 0000:07:03.0: PME# disabled
[ 0.528558] pci 0000:07:03.1: reg 10 32bit mmio: [0xfdfff400-0xfdfff4ff]
[ 0.528604] pci 0000:07:03.1: supports D1 D2
[ 0.528605] pci 0000:07:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.528610] pci 0000:07:03.1: PME# disabled
[ 0.528650] pci 0000:07:03.2: reg 10 32bit mmio: [0xfdfff000-0xfdfff0ff]
[ 0.528697] pci 0000:07:03.2: supports D1 D2
[ 0.528699] pci 0000:07:03.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.528703] pci 0000:07:03.2: PME# disabled
[ 0.528744] pci 0000:07:03.3: reg 10 32bit mmio: [0xfdffec00-0xfdffecff]
[ 0.528790] pci 0000:07:03.3: supports D1 D2
[ 0.528792] pci 0000:07:03.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.528796] pci 0000:07:03.3: PME# disabled
[ 0.528854] pci 0000:00:1e.0: transparent bridge
[ 0.528861] pci 0000:00:1e.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[ 0.528897] bus 00 -> node 0
[ 0.528906] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.529224] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.529371] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.529527] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.529667] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.529827] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.529965] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.558172] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[ 0.558374] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
[ 0.558572] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[ 0.558767] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
[ 0.558964] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
[ 0.559160] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
[ 0.559357] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
[ 0.559555] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[ 0.562507] ACPI Warning (tbutils-0217): Incorrect checksum in table [ATKG] - 59, should be C5 [20080926]
[ 0.562536] ACPI: WMI: Mapper loaded
[ 0.562585] SCSI subsystem initialized
[ 0.562585] libata version 3.00 loaded.
[ 0.562585] usbcore: registered new interface driver usbfs
[ 0.562585] usbcore: registered new interface driver hub
[ 0.562585] usbcore: registered new device driver usb
[ 0.562585] PCI: Using ACPI for IRQ routing
[ 0.576009] Bluetooth: Core ver 2.13
[ 0.576020] NET: Registered protocol family 31
[ 0.576020] Bluetooth: HCI device and connection manager initialized
[ 0.576020] Bluetooth: HCI socket layer initialized
[ 0.576020] NET: Registered protocol family 8
[ 0.576022] NET: Registered protocol family 20
[ 0.576033] NetLabel: Initializing
[ 0.576035] NetLabel: domain hash size = 128
[ 0.576036] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.576049] NetLabel: unlabeled traffic allowed by default
[ 0.576080] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.576084] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.580061] AppArmor: AppArmor Filesystem Enabled
[ 0.584008] Switched to high resolution mode on CPU 0
[ 0.584943] Switched to high resolution mode on CPU 1
[ 0.592008] pnp: PnP ACPI init
[ 0.592016] ACPI: bus type pnp registered
[ 0.595689] pnp: PnP ACPI: found 16 devices
[ 0.595692] ACPI: ACPI bus type pnp unregistered
[ 0.595700] system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved
[ 0.595708] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.595711] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.595713] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.595715] system 00:08: ioport range 0x500-0x57f has been reserved
[ 0.595718] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.595720] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.595725] system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
[ 0.595728] system 00:08: iomem range 0xfed90000-0xfed90fff has been reserved
[ 0.595730] system 00:08: iomem range 0xfed91000-0xfed91fff has been reserved
[ 0.595733] system 00:08: iomem range 0xfed92000-0xfed92fff has been reserved
[ 0.595735] system 00:08: iomem range 0xfed93000-0xfed93fff has been reserved
[ 0.595738] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.595740] system 00:08: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.595746] system 00:0a: iomem range 0xffa00000-0xffbfffff could not be reserved
[ 0.595748] system 00:0a: iomem range 0xffe00000-0xffffffff could not be reserved
[ 0.595756] system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved
[ 0.595760] system 00:0c: ioport range 0x250-0x253 has been reserved
[ 0.595763] system 00:0c: ioport range 0x256-0x25f has been reserved
[ 0.595765] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.595768] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.595770] system 00:0c: iomem range 0xfec10000-0xfec17fff has been reserved
[ 0.595772] system 00:0c: iomem range 0xfec18000-0xfec1ffff has been reserved
[ 0.595775] system 00:0c: iomem range 0xfec20000-0xfec27fff has been reserved
[ 0.595777] system 00:0c: iomem range 0xfec38000-0xfec3ffff has been reserved
[ 0.595782] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.595787] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.595790] system 00:0f: iomem range 0xc0000-0xcffff has been reserved
[ 0.595792] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 0.595795] system 00:0f: iomem range 0x100000-0xbfffffff could not be reserved
[ 0.600475] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.600478] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.600481] pci 0000:00:01.0: MEM window: 0xf8000000-0xfbffffff
[ 0.600485] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.600489] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.600491] pci 0000:00:1c.0: IO window: disabled
[ 0.600496] pci 0000:00:1c.0: MEM window: disabled
[ 0.600500] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.600507] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.600508] pci 0000:00:1c.1: IO window: disabled
[ 0.600514] pci 0000:00:1c.1: MEM window: 0xfcf00000-0xfcffffff
[ 0.600518] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.600525] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.600528] pci 0000:00:1c.2: IO window: 0xd000-0xdfff
[ 0.600533] pci 0000:00:1c.2: MEM window: 0xfd000000-0xfddfffff
[ 0.600537] pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f6efffff
[ 0.600545] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:06
[ 0.600548] pci 0000:00:1c.5: IO window: 0xe000-0xefff
[ 0.600553] pci 0000:00:1c.5: MEM window: 0xfde00000-0xfdefffff
[ 0.600558] pci 0000:00:1c.5: PREFETCH window: 0x000000f6f00000-0x000000f6ffffff
[ 0.600565] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
[ 0.600566] pci 0000:00:1e.0: IO window: disabled
[ 0.600572] pci 0000:00:1e.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.600576] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.600590] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.600593] pci 0000:00:01.0: setting latency timer to 64
[ 0.600601] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.600605] pci 0000:00:1c.0: setting latency timer to 64
[ 0.600614] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.600618] pci 0000:00:1c.1: setting latency timer to 64
[ 0.600626] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.600630] pci 0000:00:1c.2: setting latency timer to 64
[ 0.600638] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.600642] pci 0000:00:1c.5: setting latency timer to 64
[ 0.600649] pci 0000:00:1e.0: setting latency timer to 64
[ 0.600653] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.600655] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.600657] bus: 01 index 0 io port: [0xc000-0xcfff]
[ 0.600659] bus: 01 index 1 mmio: [0xf8000000-0xfbffffff]
[ 0.600661] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[ 0.600662] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.600664] bus: 02 index 0 mmio: [0x0-0x0]
[ 0.600666] bus: 02 index 1 mmio: [0x0-0x0]
[ 0.600667] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.600668] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.600670] bus: 03 index 0 mmio: [0x0-0x0]
[ 0.600671] bus: 03 index 1 mmio: [0xfcf00000-0xfcffffff]
[ 0.600673] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.600675] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.600676] bus: 04 index 0 io port: [0xd000-0xdfff]
[ 0.600678] bus: 04 index 1 mmio: [0xfd000000-0xfddfffff]
[ 0.600680] bus: 04 index 2 mmio: [0xf4000000-0xf6efffff]
[ 0.600681] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.600683] bus: 06 index 0 io port: [0xe000-0xefff]
[ 0.600685] bus: 06 index 1 mmio: [0xfde00000-0xfdefffff]
[ 0.600686] bus: 06 index 2 mmio: [0xf6f00000-0xf6ffffff]
[ 0.600688] bus: 06 index 3 mmio: [0x0-0x0]
[ 0.600690] bus: 07 index 0 mmio: [0x0-0x0]
[ 0.600691] bus: 07 index 1 mmio: [0xfdf00000-0xfdffffff]
[ 0.600693] bus: 07 index 2 mmio: [0x0-0x0]
[ 0.600694] bus: 07 index 3 io port: [0x00-0xffff]
[ 0.600696] bus: 07 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 0.600705] NET: Registered protocol family 2
[ 0.636050] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.636571] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.638413] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.638923] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.638925] TCP reno registered
[ 0.648103] NET: Registered protocol family 1
[ 0.648223] checking if image is initramfs... it is
[ 1.323093] Freeing initrd memory: 7772k freed
[ 1.326715] Simple Boot Flag at 0x51 set to 0x1
[ 1.327027] audit: initializing netlink socket (disabled)
[ 1.327049] type=2000 audit(1250105509.324:1): initialized
[ 1.335464] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.336633] VFS: Disk quotas dquot_6.5.1
[ 1.336681] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.337207] fuse init (API version 7.10)
[ 1.337277] msgmni has been set to 7789
[ 1.337426] alg: No test for stdrng (krng)
[ 1.337435] io scheduler noop registered
[ 1.337437] io scheduler anticipatory registered
[ 1.337438] io scheduler deadline registered
[ 1.337474] io scheduler cfq registered (default)
[ 1.337657] pci 0000:01:00.0: Boot video device
[ 1.341532] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.341567] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.341589] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 1.341599] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.341612] pci_express 0000:00:01.0:pcie02: allocate port service
[ 1.341622] pci_express 0000:00:01.0:pcie03: allocate port service
[ 1.341670] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.341711] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.341742] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 1.341756] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.341768] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.341778] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.341842] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.341882] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.341910] pcieport-driver 0000:00:1c.1: irq 2301 for MSI/MSI-X
[ 1.341924] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.341935] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.341997] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.342039] pcieport-driver 0000:00:1c.2: found MSI capability
[ 1.342067] pcieport-driver 0000:00:1c.2: irq 2300 for MSI/MSI-X
[ 1.342081] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 1.342092] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 1.342102] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 1.342168] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 1.342208] pcieport-driver 0000:00:1c.5: found MSI capability
[ 1.342237] pcieport-driver 0000:00:1c.5: irq 2299 for MSI/MSI-X
[ 1.342250] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 1.342263] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 1.342334] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.342821] pciehp 0000:00:01.0:pcie02: HPC vendor_id 8086 device_id 2a41 ss_vid 0 ss_did 0
[ 1.342853] pciehp 0000:00:01.0:pcie02: service driver pciehp loaded
[ 1.343313] pciehp 0000:00:1c.0:pcie02: HPC vendor_id 8086 device_id 2940 ss_vid 0 ss_did 0
[ 1.343345] pciehp 0000:00:1c.0:pcie02: service driver pciehp loaded
[ 1.343808] pciehp 0000:00:1c.2:pcie02: HPC vendor_id 8086 device_id 2944 ss_vid 0 ss_did 0
[ 1.343841] pciehp 0000:00:1c.2:pcie02: service driver pciehp loaded
[ 1.343848] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.344042] ACPI: AC Adapter [AC0] (on-line)
[ 1.344481] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 1.409373] ACPI: Battery Slot [BAT0] (battery present)
[ 1.409437] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.409440] ACPI: Power Button (FF) [PWRF]
[ 1.409492] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.409500] ACPI: Sleep Button (CM) [SLPB]
[ 1.409540] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 1.416575] ACPI: Lid Switch [LID]
[ 1.417345] ACPI: SSDT BFF974D0, 0248 (r1 PmRef Cpu0Ist 3000 INTL 20051117)
[ 1.417977] ACPI: SSDT BFF977B0, 0765 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
[ 1.418877] Monitor-Mwait will be used to enter C-1 state
[ 1.418880] Monitor-Mwait will be used to enter C-3 state
[ 1.418892] ACPI: CPU0 (power states: C1[C1] C2[C3])
[ 1.418913] processor ACPI_CPU:00: registered as cooling_device0
[ 1.418917] ACPI: Processor [P001] (supports 8 throttling states)
[ 1.419275] ACPI: SSDT BFF97400, 00CC (r1 PmRef Cpu1Ist 3000 INTL 20051117)
[ 1.419753] ACPI: SSDT BFF97720, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20051117)
[ 1.420807] ACPI: CPU1 (power states: C1[C1] C2[C3])
[ 1.420823] processor ACPI_CPU:01: registered as cooling_device1
[ 1.420827] ACPI: Processor [P002] (supports 8 throttling states)
[ 1.432467] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.434808] ACPI: Thermal Zone [THRM] (58 C)
[ 1.457183] Linux agpgart interface v0.103
[ 1.457190] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.458137] brd: module loaded
[ 1.458422] loop: module loaded
[ 1.458481] Fixed MDIO Bus: probed
[ 1.458486] PPP generic driver version 2.4.2
[ 1.458538] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.458562] Driver 'sd' needs updating - please use bus_type methods
[ 1.458570] Driver 'sr' needs updating - please use bus_type methods
[ 1.458608] ahci 0000:00:1f.2: version 3.0
[ 1.458622] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.458657] ahci 0000:00:1f.2: irq 2298 for MSI/MSI-X
[ 1.458729] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
[ 1.458732] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems
[ 1.458737] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.458946] scsi0 : ahci
[ 1.459029] scsi1 : ahci
[ 1.459078] scsi2 : ahci
[ 1.459126] scsi3 : ahci
[ 1.459174] scsi4 : ahci
[ 1.459220] scsi5 : ahci
[ 1.459433] ata1: SATA max UDMA/133 abar m2048@0xf7fff000 port 0xf7fff100 irq 2298
[ 1.459436] ata2: SATA max UDMA/133 abar m2048@0xf7fff000 port 0xf7fff180 irq 2298
[ 1.459438] ata3: DUMMY
[ 1.459439] ata4: DUMMY
[ 1.459440] ata5: DUMMY
[ 1.459442] ata6: SATA max UDMA/133 abar m2048@0xf7fff000 port 0xf7fff380 irq 2298
[ 1.776018] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.781709] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 1.781779] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[ 1.781781] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.788539] ata1.00: ATA-8: SAMSUNG HM500LI, 2TF00_00, max UDMA7
[ 1.788541] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.795958] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 1.796028] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[ 1.796030] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.802792] ata1.00: configured for UDMA/133
[ 2.540015] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.542540] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[ 2.544304] ata2.00: ATAPI: MATSHITADVD-RAM UJ870BJ, 1.02, max UDMA/33
[ 2.547110] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded
[ 2.548887] ata2.00: configured for UDMA/33
[ 2.884015] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.900090] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500LI 2TF0 PQ: 0 ANSI: 5
[ 2.900172] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 2.900192] sd 0:0:0:0: [sda] Write Protect is off
[ 2.900194] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.900218] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.900278] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 2.900292] sd 0:0:0:0: [sda] Write Protect is off
[ 2.900294] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.900317] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.900320] sda: sda1 sda2 sda3 sda4
[ 2.967637] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.967680] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.969452] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ870BJ 1.02 PQ: 0 ANSI: 5
[ 2.972997] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.973004] Uniform CD-ROM driver Revision: 3.20
[ 2.973082] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.973114] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.973700] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.973720] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.973736] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.973739] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.973787] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.977705] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.977711] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.977727] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fffc00
[ 2.992008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.992066] usb usb1: configuration #1 chosen from 1 choice
[ 2.992089] hub 1-0:1.0: USB hub found
[ 2.992097] hub 1-0:1.0: 6 ports detected
[ 2.992202] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.992212] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.992215] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.992250] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.996165] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.996171] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.996182] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7fff800
[ 3.008008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.008063] usb usb2: configuration #1 chosen from 1 choice
[ 3.008085] hub 2-0:1.0: USB hub found
[ 3.008091] hub 2-0:1.0: 6 ports detected
[ 3.008174] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.008190] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.008209] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.008215] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.008219] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.008258] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.008289] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
[ 3.008356] usb usb3: configuration #1 chosen from 1 choice
[ 3.008377] hub 3-0:1.0: USB hub found
[ 3.008383] hub 3-0:1.0: 2 ports detected
[ 3.008459] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.008464] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.008467] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.008502] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.008533] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 3.008602] usb usb4: configuration #1 chosen from 1 choice
[ 3.008623] hub 4-0:1.0: USB hub found
[ 3.008628] hub 4-0:1.0: 2 ports detected
[ 3.008703] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.008708] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 3.008711] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.008748] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 3.008780] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
[ 3.008844] usb usb5: configuration #1 chosen from 1 choice
[ 3.008865] hub 5-0:1.0: USB hub found
[ 3.008871] hub 5-0:1.0: 2 ports detected
[ 3.008949] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.008955] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.008958] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.008996] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 3.009025] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[ 3.009088] usb usb6: configuration #1 chosen from 1 choice
[ 3.009111] hub 6-0:1.0: USB hub found
[ 3.009117] hub 6-0:1.0: 2 ports detected
[ 3.009189] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.009195] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.009198] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.009240] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 3.009264] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 3.009331] usb usb7: configuration #1 chosen from 1 choice
[ 3.009352] hub 7-0:1.0: USB hub found
[ 3.009357] hub 7-0:1.0: 2 ports detected
[ 3.009431] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.009436] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.009440] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.009479] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 3.009505] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
[ 3.009571] usb usb8: configuration #1 chosen from 1 choice
[ 3.009592] hub 8-0:1.0: USB hub found
[ 3.009599] hub 8-0:1.0: 2 ports detected
[ 3.009723] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 3.012815] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 3.014920] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.014925] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.014927] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.014929] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.014931] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.025039] mice: PS/2 mouse device common for all mice
[ 3.073054] rtc_cmos 00:03: RTC can wake from S4
[ 3.073084] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.073111] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.073166] device-mapper: uevent: version 1.0.3
[ 3.073247] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.073316] device-mapper: multipath: version 1.0.5 loaded
[ 3.073318] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.073442] cpuidle: using governor ladder
[ 3.073516] cpuidle: using governor menu
[ 3.073884] TCP cubic registered
[ 3.073943] NET: Registered protocol family 10
[ 3.074290] lo: Disabled Privacy Extensions
[ 3.074548] NET: Registered protocol family 17
[ 3.074564] Bluetooth: L2CAP ver 2.11
[ 3.074565] Bluetooth: L2CAP socket layer initialized
[ 3.074568] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.074569] Bluetooth: SCO socket layer initialized
[ 3.074597] Bluetooth: RFCOMM socket layer initialized
[ 3.074603] Bluetooth: RFCOMM TTY layer initialized
[ 3.074605] Bluetooth: RFCOMM ver 1.10
[ 3.075401] Marking TSC unstable due to TSC halts in idle
[ 3.075495] registered taskstats version 1
[ 3.075619] Magic number: 5:407:546
[ 3.075658] mem null: hash matches
[ 3.075680] processor ACPI_CPU:01: hash matches
[ 3.075723] rtc_cmos 00:03: setting system clock to 2009-08-12 19:31:51 UTC (1250105511)
[ 3.075726] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.075727] EDD information not available.
[ 3.075773] Freeing unused kernel memory: 532k freed
[ 3.075971] Write protecting the kernel read-only data: 6688k
[ 3.111439] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.424933] ohci1394 0000:07:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.430317] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.430334] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.430351] r8169 0000:06:00.0: setting latency timer to 64
[ 3.430432] r8169 0000:06:00.0: irq 2297 for MSI/MSI-X
[ 3.430949] eth0: RTL8168c/8111c at 0xffffc2000007c000, 00:23:54:4c:38:15, XID 3c4000c0 IRQ 2297
[ 3.476763] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fdfff800-fdffffff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 3.537029] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 3.670045] usb 2-1: configuration #1 chosen from 1 choice
[ 3.781017] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 3.913702] usb 2-2: configuration #1 chosen from 1 choice
[ 4.022388] kjournald starting. Commit interval 5 seconds
[ 4.022398] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.080072] usb 2-5: new high speed USB device using ehci_hcd and address 5
[ 4.752148] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c000196f505]
[ 4.771176] usb 2-5: configuration #1 chosen from 1 choice
[ 5.068057] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 5.238902] usb 5-1: configuration #1 chosen from 1 choice
[ 5.481041] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 5.649895] usb 5-2: configuration #1 chosen from 1 choice
[ 5.892050] usb 7-2: new low speed USB device using uhci_hcd and address 2
[ 6.070360] usb 7-2: configuration #1 chosen from 1 choice
[ 6.336051] usb 8-2: new low speed USB device using uhci_hcd and address 2
[ 6.518978] usb 8-2: configuration #1 chosen from 1 choice
[ 10.984338] udev: starting version 141
[ 12.118813] nvidia: module license 'NVIDIA' taints kernel.
[ 12.371451] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.371468] nvidia 0000:01:00.0: setting latency timer to 64
[ 12.372447] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.44 Tue Mar 24 05:46:32 PST 2009
[ 12.445650] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 12.445742] usbcore: registered new interface driver btusb
[ 12.563187] usbcore: registered new interface driver hiddev
[ 12.578652] input: USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input5
[ 12.612184] generic-usb 0003:099A:610C.0001: input,hidraw0: USB HID v1.00 Keyboard [ USB Multimedia Keyboard ] on usb-0000:00:1d.1-2/input0
[ 12.626656] input: USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input6
[ 12.656192] generic-usb 0003:099A:610C.0002: input,hidraw1: USB HID v1.00 Device [ USB Multimedia Keyboard ] on usb-0000:00:1d.1-2/input1
[ 12.671285] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input7
[ 12.696134] generic-usb 0003:045E:0040.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2/input0
[ 12.696155] usbcore: registered new interface driver usbhid
[ 12.696176] usbhid: v2.6:USB HID core driver
[ 12.711182] iTCO_vendor_support: vendor-support=0
[ 12.720370] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 12.720530] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860)
[ 12.720611] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.738780] sdhci: Secure Digital Host Controller Interface driver
[ 12.738782] sdhci: Copyright(c) Pierre Ossman
[ 12.780282] sdhci-pci 0000:07:03.1: SDHCI controller found [1180:0822] (rev 22)
[ 12.780298] sdhci-pci 0000:07:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 12.781337] sdhci-pci 0000:07:03.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 12.783400] mmc0: SDHCI controller on PCI [0000:07:03.1] using DMA
[ 12.818258] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 13.037077] cfg80211: Calling CRDA to update world regulatory domain
[ 13.123374] Linux video capture interface: v2.00
[ 13.151371] asus-laptop: Asus Laptop Support version 0.42
[ 13.155644] asus-laptop: N80Vc model detected
[ 13.156635] asus-laptop: Brightness ignored, must be controlled by ACPI video driver
[ 13.317667] cfg80211: World regulatory domain updated:
[ 13.317671] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.317673] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.317675] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.317677] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.317679] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.317681] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.353503] acpi device:1e: registered as cooling_device2
[ 13.353735] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/device:1a/input/input9
[ 13.354891] dvb-usb: found a 'Technotrend TT Connect S2-3650-CI' in warm state.
[ 13.354897] pctv452e_power_ctrl: 1
[ 13.356043] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 13.356246] DVB: registering new adapter (Technotrend TT Connect S2-3650-CI)
[ 13.356734] pctv452e: I2C error -121; AA 02 A0 01 14 -> 55 02 A0 00 00.
[ 13.359742] dvb-usb: MAC address: ffff88013c8270e0
[ 13.360066] pctv452e_frontend_attach Enter
[ 13.380135] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 13.384019] uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera (174f:8a34)
[ 13.413529] dvb-usb: found a 'Technotrend TT-connect CT-3650' in warm state.
[ 13.414130] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 13.415438] DVB: registering new adapter (Technotrend TT-connect CT-3650)
[ 13.424684] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 13.462246] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 13.485379] usbcore: registered new interface driver uvcvideo
[ 13.485401] USB Video Class driver (v0.1.0)
[ 13.548235] TDA10023: i2c-addr = 0x0c, id = 0x7d
[ 13.548241] DVB: registering adapter 1 frontend 0 (Philips TDA10023 DVB-C)...
[ 13.568236] stb0899_attach: Attaching STB0899
[ 13.618440] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 13.618612] DVB: registering new adapter (Technotrend TT-connect CT-3650)
[ 13.634941] pctv452e: CI initialized.
[ 13.634944] pctv452e_frontend_attach Leave Ok
[ 13.634947] DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)...
[ 13.635012] pctv452e_tuner_attach Enter
[ 13.657669] ath9k: 0.1
[ 13.657716] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.657727] ath9k 0000:03:00.0: setting latency timer to 64
[ 13.664292] tda10048_establish_defaults() tda10048_config.dtv6_if_freq_khz is not set (defaulting to 4300)
[ 13.664295] tda10048_establish_defaults() tda10048_config.dtv7_if_freq_khz is not set (defaulting to 4300)
[ 13.664297] tda10048_establish_defaults() tda10048_config.dtv8_if_freq_khz is not set (defaulting to 4300)
[ 13.664299] tda10048_establish_defaults() tda10048_config.clk_freq_khz is not set (defaulting to 16000)
[ 13.664390] stb6100_attach: Attaching STB6100
[ 13.664392] pctv452e_tuner_attach Leave
[ 13.664693] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/input/input10
[ 13.670590] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN DVB-T)...
[ 13.811823] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 13.811890] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.842812] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
[ 14.091831] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 14.117141] dvb-usb: schedule remote query interval to 500 msecs.
[ 14.117146] pctv452e_power_ctrl: 0
[ 14.117148] dvb-usb: Technotrend TT Connect S2-3650-CI successfully initialized and connected.
[ 14.117177] usbcore: registered new interface driver pctv452e
[ 14.117224] usbcore: registered new interface driver dvb-usb-tt-connect-s2-3600-01.fw
[ 14.146411] Registered led device: ath9k-phy0:radio
[ 14.146458] Registered led device: ath9k-phy0:assoc
[ 14.146494] Registered led device: ath9k-phy0:tx
[ 14.146529] Registered led device: ath9k-phy0:rx
[ 14.146990] phy0: Atheros 9280: mem=0xffffc20010740000, irq=17
[ 14.312119] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000
[ 14.354402] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 15.668111] dvb-usb: recv bulk message failed: -110
[ 15.668115] ttusb2: there might have been an error during control message transfer. (rlen = 0, was 0)
[ 15.668361] dvb-usb: Technotrend TT-connect CT-3650 successfully initialized and connected.
[ 15.668397] usbcore: registered new interface driver dvb_usb_ttusb2
[ 15.843706] lp: driver loaded but no devices found
[ 16.500113] Clocksource tsc unstable (delta = -209427918 ns)
[ 16.535985] EXT3 FS on sda3, internal journal
[ 17.634964] type=1505 audit(1250105526.057:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2341
[ 17.672855] type=1505 audit(1250105526.093:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2345
[ 17.672967] type=1505 audit(1250105526.093:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2345
[ 17.673004] type=1505 audit(1250105526.093:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2345
[ 17.673041] type=1505 audit(1250105526.097:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2345
[ 17.778442] type=1505 audit(1250105526.201:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2350
[ 17.778589] type=1505 audit(1250105526.201:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2350
[ 17.820086] type=1505 audit(1250105526.241:9): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=2354
[ 17.843324] type=1505 audit(1250105526.265:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2358
[ 28.520452] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 28.520456] vboxdrv: Successfully done.
[ 28.520457] vboxdrv: Found 2 processor cores.
[ 28.520530] VBoxDrv: dbg - g_abExecMemory=ffffffffa0b94b40
[ 28.520550] vboxdrv: fAsync=0 offMin=0x1a4 offMax=0x6c2
[ 28.520592] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 28.520593] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009).
[ 28.726100] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0d33980
[ 35.854791] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 35.854797] Bluetooth: BNEP filters: protocol multicast
[ 35.953243] Bridge firewalling registered
[ 37.612620] ppdev: user-space parallel port driver
[ 41.577880] r8169: eth0: link up
[ 41.577888] r8169: eth0: link up
[ 41.608220] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 52.073056] eth0: no IPv6 routers present
[ 55.347330] pciehp 0000:00:01.0:pcie02: Card present on Slot(16)
[ 114.735996] pciehp 0000:00:01.0:pcie02: Card not present on Slot(16)
[ 114.748153] pciehp 0000:00:01.0:pcie02: Card present on Slot(16)
[ 114.753198] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
^ permalink raw reply [flat|nested] 16+ messages in thread
* RE: [linux-dvb] TechnoTrend TT-connect S2-3650 CI
[not found] ` <!&!AAAAAAAAAAAYAAAAAAAAAMs7WpTkg9MRuRcAACHFyB/CgAAAEAAAACcjVxFMux1AotUWOp 7nrWEBAAAAAA==@coolrose.fsnet.co.uk>
@ 2009-08-13 5:45 ` Niels Wagenaar
0 siblings, 0 replies; 16+ messages in thread
From: Niels Wagenaar @ 2009-08-13 5:45 UTC (permalink / raw)
To: Christopher Thornley; +Cc: n.wagenaar, linux-media
Op Do, 13 augustus, 2009 01:30, schreef Christopher Thornley:
> Hi,
> I have now successfully installed the S2API and s2-liplianin (Thank for
> the link Goga777)
>
> -- SNIP --
>
> I have tried to build (make) several versions of VDR from version 1.7.4 to
> 1.7.8 but I am receiving the following error message which I don't know
> what
> to do to resolve this :-
>
> system@Firefly:~/dvb/vdr-1.7.8$ make
> g++ -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses -c -DREMOTE_KBD
> -DLIRC_DEVICE=\"/dev/lircd\" -DRCU_DEVICE=\"/dev/ttyS1\" -D_GNU_SOURCE
> -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE
> -DVIDEODIR=\"/video\" -DCONFDIR=\"/video\" -DPLUGINDIR=\"./PLUGINS/lib\"
> -DLOCDIR=\"./locale\" -I/usr/include/freetype2 dvbdevice.c
> dvbdevice.c: In constructor 'cDvbDevice::cDvbDevice(int)':
> dvbdevice.c:487: error: 'FE_CAN_2G_MODULATION' was not declared in this
> scope
> make: *** [dvbdevice.o] Error 1
> system@Firefly:~/dvb/vdr-1.7.8$
>
Edit Make.config in the VDR source directory and change the DVBDIR to the
following:
DVBDIR = /usr/local/src/s2-liplianin/linux
Change /usr/local/src/s2-liplianin to your location where you fetched
s2-liplianin. Also you need to do an additional command before you can
compile VDR. Go to the location where you have s2-liplianin (example: cd
/usr/local/src/s2-liplianin) and use the following commands:
cd linux/include/linux
ln -s /usr/src/linux-headers-`uname -r`/include/linux/compiler.h ./
Now go to the VDR source-folder. Do a make clean and do a make again. VDR
should now compile like it should :)
>
> Many Thanks
> Chris
If you have any problems at all, the best option is to join the VDR
mailinglist (vdr@linuxtv.org) since this mailinglist is for Linux media
and not for VDR ;).
Regards,
Niels Wagenaar
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [linux-dvb] TechnoTrend TT-connect S2-3650 CI
2009-08-12 19:30 ` Jens Nixdorf
@ 2009-09-04 8:29 ` Harald Milz
2009-09-04 9:15 ` Chris Thornley
0 siblings, 1 reply; 16+ messages in thread
From: Harald Milz @ 2009-09-04 8:29 UTC (permalink / raw)
To: linux-media; +Cc: linux-dvb
On Wed, Aug 12, 2009 at 09:30:15PM +0200, Jens Nixdorf wrote:
> As Niels told you already, you cant use both types of driver. I own the
> same DVB-S2-Box from Technotrend and i'm using it with VDR 1.7.0 in
> ubuntu 9.04. I was following the wiki for installing s2-liplianin-
> drivers, and since this time the box is running including its CI.
Mine as well under openSUSE 11.1. The part should definitely get the
"supported" status. I figure the s2-liaplianin tree need to me merged into the
official tree then. As the S2-3200 card which is technically very similar
except for the USB interface is officially supported in kernel 2.6.29, a
respective hint should be added to the Wiki. I may test a 2.6.29 kernel for
openSUSE 11.1 today and give some feedback.
Same for the S2-3600 which is technically identical except for the CI.
Any idea if the Satelco part
(http://www.amazon.de/SATELCO-EasyWatch-HDTV-USB-DVB-S2/dp/B000X1C02W) is a
OEM part of the S2-3650?
> Maybe there could be some optimization (the log is full with some
> bandwisth-messages from the stb6100-part), but it works at least good
> enough for me.
"modprobe ... verbose=0" helps.
--
Save the Whales -- Harpoon a Honda.
^ permalink raw reply [flat|nested] 16+ messages in thread
* RE: [linux-dvb] TechnoTrend TT-connect S2-3650 CI
2009-09-04 8:29 ` Harald Milz
@ 2009-09-04 9:15 ` Chris Thornley
0 siblings, 0 replies; 16+ messages in thread
From: Chris Thornley @ 2009-09-04 9:15 UTC (permalink / raw)
To: linux-media; +Cc: linux-dvb
There's still no fully working driver for the TT-connectR CT-3650 CI DVB-C
and DVB-T which is very similar to the TT-connect S2-3650 CI.
Is anyone working on getting this USB device to correctly work with the
driver and successfully tune into channels or is this problem being ignored
in the hope it will go away?
Thanks
Chris
/> Christopher J. Thornley is cjt@coolrose.fsnet.co.uk
( //------------------------------------------------------,
(*)OXOXOXOXO(*>=*=O=S=U=0=3=6=*=--------- >
( \\------------------------------------------------------'
\> Home Page :-http://www.coolrose.fsnet.co.uk
-----Original Message-----
From: linux-media-owner@vger.kernel.org
[mailto:linux-media-owner@vger.kernel.org] On Behalf Of Harald Milz
Sent: 04 September 2009 09:30
To: linux-media@vger.kernel.org
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] TechnoTrend TT-connect S2-3650 CI
On Wed, Aug 12, 2009 at 09:30:15PM +0200, Jens Nixdorf wrote:
> As Niels told you already, you cant use both types of driver. I own
> the same DVB-S2-Box from Technotrend and i'm using it with VDR 1.7.0
> in ubuntu 9.04. I was following the wiki for installing s2-liplianin-
> drivers, and since this time the box is running including its CI.
Mine as well under openSUSE 11.1. The part should definitely get the
"supported" status. I figure the s2-liaplianin tree need to me merged into
the official tree then. As the S2-3200 card which is technically very
similar except for the USB interface is officially supported in kernel
2.6.29, a respective hint should be added to the Wiki. I may test a 2.6.29
kernel for openSUSE 11.1 today and give some feedback.
Same for the S2-3600 which is technically identical except for the CI.
Any idea if the Satelco part
(http://www.amazon.de/SATELCO-EasyWatch-HDTV-USB-DVB-S2/dp/B000X1C02W) is a
OEM part of the S2-3650?
> Maybe there could be some optimization (the log is full with some
> bandwisth-messages from the stb6100-part), but it works at least good
> enough for me.
"modprobe ... verbose=0" helps.
--
Save the Whales -- Harpoon a Honda.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org More majordomo info at
http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2009-09-04 9:15 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-10-13 14:52 [linux-dvb] Technotrend TT-Connect S2-3650 CI Christian Heidingsfelder [Heidingsfelder + Partner]
2008-10-13 15:34 ` Faruk A
2008-10-13 16:03 ` Christian Heidingsfelder [Heidingsfelder + Partner]
2008-10-13 16:05 ` Christian Heidingsfelder [Heidingsfelder + Partner]
2008-10-13 16:33 ` Faruk A
2008-10-13 16:54 ` Christian Heidingsfelder [Heidingsfelder + Partner]
-- strict thread matches above, loose matches on Subject: below --
2008-10-20 19:28 Christian Heidingsfelder [Heidingsfelder + Partner]
2008-10-20 20:56 ` Igor M. Liplianin
2008-10-21 13:07 ` Christian Heidingsfelder [Heidingsfelder + Partner]
2009-08-11 18:32 [linux-dvb] TechnoTrend TT-connect " Christopher Thornley
[not found] ` <!&!AAAAAAAAAAAYAAAAAAAAAMs7WpTkg9MRuRcAACHFyB/CgAAAEAAAAJQ52z3qEFtDsl72y5 icHrgBAAAAAA==@coolrose.fsnet.co.uk>
2009-08-11 19:06 ` Niels Wagenaar
2009-08-12 23:30 ` Christopher Thornley
[not found] ` <!&!AAAAAAAAAAAYAAAAAAAAAMs7WpTkg9MRuRcAACHFyB/CgAAAEAAAACcjVxFMux1AotUWOp 7nrWEBAAAAAA==@coolrose.fsnet.co.uk>
2009-08-13 5:45 ` Niels Wagenaar
2009-08-12 19:30 ` Jens Nixdorf
2009-09-04 8:29 ` Harald Milz
2009-09-04 9:15 ` Chris Thornley
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.