All of lore.kernel.org
 help / color / mirror / Atom feed
* [ath9k-devel] connection keeps dropping: AR928X, 2.6.27.4
@ 2008-11-13 13:39 Ivo Ugrina
  2008-11-13 13:59 ` Ivo Ugrina
  2008-11-18 14:47 ` Ivo Ugrina
  0 siblings, 2 replies; 3+ messages in thread
From: Ivo Ugrina @ 2008-11-13 13:39 UTC (permalink / raw)
  To: ath9k-devel

Hi,

I have Asus x51l with Atheros AR928X chip inside and
I've compiled vanilla-kernel 2.6.27.4 to enable support
for this chip.

And here comes the problem:
my connection keeps dropping off every few minutes.
sometimes it works fine for few hours and then starts
dropping off. It's the same with WEP and WPA.
Also, sometimes I lose connection completely and I am
not even able to do "iwlist scan". The only thing that
helps is "modprobe -r ath9k && modprobe ath9k".

So, I believe it's ath9k error.

Here's some tech info:
I use Gentoo, vanilla kernel 2.6.27.4.
For WEP I use iwconfig and for WPA wpa_supplicant.

# (only wifi)
$ lspci -vnn
Network controller [0280]: Atheros Communications, Inc. Device
[168c:002a] (rev 01)
Subsystem: Device [1a3b:1067]
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at fdef0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Capabilities: [60] Express Legacy Endpoint, MSI 00
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: ath9k
Kernel modules: ath9k

# (after $modprobe -r ath9k && modprobe ath9k)
$ dmesg
ath9k 0000:04:00.0: PCI INT A disabled
ath9k: driver unloaded
ath9k: 0.1
ath9k 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ath9k 0000:04:00.0: setting latency timer to 64
phy0: Selected rate control algorithm 'ath9k_rate_control'
phy0: Atheros 9280: mem=0xf8e60000, irq=17
ForceXPAon: 0
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ForceXPAon: 0
ForceXPAon: 0
ForceXPAon: 0
ForceXPAon: 0
ForceXPAon: 0
wlan0: authenticate with AP 00:1d:7e:55:af:db
wlan0: authenticate with AP 00:1d:7e:55:af:db
wlan0: authenticate with AP 00:1d:7e:55:af:db
wlan0: authentication with AP 00:1d:7e:55:af:db timed out
ForceXPAon: 0
ForceXPAon: 0
ForceXPAon: 0
ForceXPAon: 0
ForceXPAon: 0
wlan0: authenticate with AP 00:1d:7e:55:af:db
wlan0: authenticated
wlan0: associate with AP 00:1d:7e:55:af:db
wlan0: RX AssocResp from 00:1d:7e:55:af:db (capab=0x11 status=0 aid=1)
wlan0: associated
ForceXPAon: 0
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
wlan0: deauthenticated
wlan0: authenticate with AP 00:1d:7e:55:af:db
wlan0: authenticated
wlan0: associate with AP 00:1d:7e:55:af:db
wlan0: RX ReassocResp from 00:1d:7e:55:af:db (capab=0x11 status=0 aid=1)
wlan0: associated
ForceXPAon: 0
ForceXPAon: 0
.
.
.


-- 
Ivo Ugrina
ICQ: 47508335
Jabber: iugrina at jabber.org

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2008-11-18 14:47 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-11-13 13:39 [ath9k-devel] connection keeps dropping: AR928X, 2.6.27.4 Ivo Ugrina
2008-11-13 13:59 ` Ivo Ugrina
2008-11-18 14:47 ` Ivo Ugrina

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.