All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: linux-arm-kernel@lists.infradead.org, Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>, Peng Fan <peng.fan@nxp.com>,
	Richard Zhu <hongxing.zhu@nxp.com>,
	Shawn Guo <shawnguo@kernel.org>,
	NXP Linux Team <linux-imx@nxp.com>, Marek Vasut <marex@denx.de>
Subject: Re: [PATCH 3/3] arm64: dts: imx8mq: Deduplicate PCIe clock-names property
Date: Thu, 03 Nov 2022 08:56:30 +0100	[thread overview]
Message-ID: <4937041.GXAFRqVoOG@steina-w> (raw)
In-Reply-To: <20221102212248.138284-3-marex@denx.de>

Hi Marek,

Am Mittwoch, 2. November 2022, 22:22:48 CET schrieb Marek Vasut:
> Move the PCIe clock-names property from various DTs into SoC dtsi to
> reduce duplication. In case of a couple of boards, reorder the clock
> so they match the order in yaml DT bindings.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>
> ---
> Cc: Fabio Estevam <festevam@denx.de>
> Cc: Peng Fan <peng.fan@nxp.com>
> Cc: Richard Zhu <hongxing.zhu@nxp.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> To: linux-arm-kernel@lists.infradead.org
> ---
>  arch/arm64/boot/dts/freescale/imx8mq-evk.dts           | 10 ++++------
>  .../boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts   | 10 ++++------
>  arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts   |  5 ++---
>  .../arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts | 10 ++++------
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi              |  1 +
>  5 files changed, 15 insertions(+), 21 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index
> 2102e9b57697c..0e095bb176c5f 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> @@ -355,10 +355,9 @@ &pcie0 {
>  	pinctrl-0 = <&pinctrl_pcie0>;
>  	reset-gpio = <&gpio5 28 GPIO_ACTIVE_LOW>;
>  	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
> -		 <&clk IMX8MQ_CLK_PCIE1_AUX>,
> +		 <&pcie0_refclk>,
>  		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
> -		 <&pcie0_refclk>;
> -	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> +		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
>  	vph-supply = <&vgen5_reg>;
>  	status = "okay";
>  };
> @@ -368,10 +367,9 @@ &pcie1 {
>  	pinctrl-0 = <&pinctrl_pcie1>;
>  	reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
>  	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
> -		 <&clk IMX8MQ_CLK_PCIE2_AUX>,
> +		 <&pcie0_refclk>,
>  		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
> -		 <&pcie0_refclk>;
> -	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> +		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
>  	vpcie-supply = <&reg_pcie1>;
>  	vph-supply = <&vgen5_reg>;
>  	status = "okay";
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts index
> a91c136797f60..6376417e918c2 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> @@ -245,20 +245,18 @@ &pcie0 {
>  	pinctrl-0 = <&pinctrl_pcie0>;
>  	reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
>  	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
> -		 <&clk IMX8MQ_CLK_PCIE1_AUX>,
> +		 <&pcie0_refclk>,
>  		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
> -		 <&pcie0_refclk>;
> -	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> +		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
>  	status = "okay";
>  };
> 
>  /* Intel Ethernet Controller I210/I211 */
>  &pcie1 {
>  	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
> -		 <&clk IMX8MQ_CLK_PCIE2_AUX>,
> +		 <&pcie1_refclk>,
>  		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
> -		 <&pcie1_refclk>;
> -	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> +		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
>  	fsl,max-link-speed = <1>;
>  	status = "okay";
>  };
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
> b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts index
> 055031bba8c4b..200268660518d 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
> @@ -197,10 +197,9 @@ &pcie1 {
>  	pinctrl-0 = <&pinctrl_pcie1>;
>  	reset-gpio = <&gpio3 23 GPIO_ACTIVE_LOW>;
>  	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
> -		 <&clk IMX8MQ_CLK_PCIE2_AUX>,
> +		 <&pcie1_refclk>,
>  		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
> -		 <&pcie1_refclk>;
> -	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> +		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
>  	status = "okay";
>  };
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
> b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts index
> d7660eab68b94..344cfdaeb1d59 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
> @@ -105,10 +105,9 @@ &led2 {
>  &pcie0 {
>  	reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
>  	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
> -		 <&clk IMX8MQ_CLK_PCIE1_AUX>,
> +		 <&pcie0_refclk>,
>  		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
> -		 <&pcie0_refclk>;
> -	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> +		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
>  	epdev_on-supply = <&reg_vcc_3v3>;
>  	hard-wired = <1>;
>  	status = "okay";
> @@ -120,10 +119,9 @@ &pcie0 {
>   */
>  &pcie1 {
>  	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
> -		 <&clk IMX8MQ_CLK_PCIE2_AUX>,
> +		 <&pcie1_refclk>,
>  		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
> -		 <&pcie1_refclk>;
> -	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> +		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
>  	epdev_on-supply = <&reg_vcc_3v3>;
>  	hard-wired = <1>;
>  	status = "okay";
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index
> c6530e5c7fef5..c47e2d7235d3e 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -1529,6 +1529,7 @@ pcie0: pcie@33800000 {
>  			                <0 0 0 4 &gic GIC_SPI 122 
IRQ_TYPE_LEVEL_HIGH>;
>  			fsl,max-link-speed = <2>;
>  			linux,pci-domain = <0>;
> +			clock-names = "pcie", "pcie_bus", "pcie_phy", 
"pcie_aux";
>  			power-domains = <&pgc_pcie>;
>  			resets = <&src IMX8MQ_RESET_PCIEPHY>,
>  			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,

For imx8mq.dtsi and imx8mq-tqma8mq-mba8mx.dts:
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>

Thanks
Alexander




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-11-03  7:57 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-02 21:22 [PATCH 1/3] arm64: dts: imx8mm: Deduplicate PCIe clock-names property Marek Vasut
2022-11-02 21:22 ` [PATCH 2/3] arm64: dts: imx8mp: " Marek Vasut
2022-11-03  8:00   ` Alexander Stein
2022-11-02 21:22 ` [PATCH 3/3] arm64: dts: imx8mq: " Marek Vasut
2022-11-03  7:56   ` Alexander Stein [this message]
2022-11-03  7:58 ` [PATCH 1/3] arm64: dts: imx8mm: " Alexander Stein
2022-11-11  6:33 ` Shawn Guo
2022-11-11 14:03   ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4937041.GXAFRqVoOG@steina-w \
    --to=alexander.stein@ew.tq-group.com \
    --cc=festevam@denx.de \
    --cc=hongxing.zhu@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=marex@denx.de \
    --cc=peng.fan@nxp.com \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.