From: Andriy Gapon <avg@icyb.net.ua>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] patch: (attempt to) emulate 440BX/PIIX4
Date: Tue, 17 Mar 2009 17:58:40 +0200 [thread overview]
Message-ID: <49BFC8B0.2060609@icyb.net.ua> (raw)
[-- Attachment #1: Type: text/plain, Size: 508 bytes --]
With the attached patches to qemu (against 0.10.0 release) and bochs bios (against
latest from git plus qemu patches on top), I was able to boot win2k image that was
transfered from physical system with 440BX/PIIX4E hardware (MS-6163 motherboard).
The patches are unconditional, but it won't be too hard to put the differences
under compile-time condition.
Apparently qemu already emulates enough of 440BX/PIIX4 sufficiently well - I
didn't have any blue screens or other issues so far.
--
Andriy Gapon
[-- Attachment #2: bios-piix4.patch --]
[-- Type: text/plain, Size: 3239 bytes --]
diff --git a/bios/BIOS-bochs-latest b/bios/BIOS-bochs-latest
index 6ce9d22..27f0256 100644
Binary files a/bios/BIOS-bochs-latest and b/bios/BIOS-bochs-latest differ
diff --git a/bios/BIOS-bochs-legacy b/bios/BIOS-bochs-legacy
index 656c28d..e31c279 100644
Binary files a/bios/BIOS-bochs-legacy and b/bios/BIOS-bochs-legacy differ
diff --git a/bios/rombios.c b/bios/rombios.c
index 0f13b53..b04426c 100644
--- a/bios/rombios.c
+++ b/bios/rombios.c
@@ -151,7 +151,7 @@
#define BX_MAX_ATA_DEVICES (BX_MAX_ATA_INTERFACES*2)
#define BX_VIRTUAL_PORTS 1 /* normal output to Bochs ports */
-#define BX_DEBUG_SERIAL 0 /* output to COM1 */
+#define BX_DEBUG_SERIAL 1 /* output to COM1 */
/* model byte 0xFC = AT */
#define SYS_MODEL_ID 0xFC
@@ -202,7 +202,7 @@
// define this if you want to make PCIBIOS working on a specific bridge only
// undef enables PCIBIOS when at least one PCI device is found
// i440FX is emulated by Bochs and QEMU
-#define PCI_FIXED_HOST_BRIDGE 0x12378086 ;; i440FX PCI bridge
+#define PCI_FIXED_HOST_BRIDGE 0x71908086 ;; i440FX PCI bridge
// #20 is dec 20
// #$20 is hex 20 = 32
@@ -9688,17 +9688,17 @@ pci_routing_table_structure:
db 0, 1 ;; version
dw 32 + (6 * 16) ;; table size
db 0 ;; PCI interrupt router bus
- db 0x08 ;; PCI interrupt router DevFunc
+ db 0x38 ;; PCI interrupt router DevFunc
dw 0x0000 ;; PCI exclusive IRQs
dw 0x8086 ;; compatible PCI interrupt router vendor ID
- dw 0x122e ;; compatible PCI interrupt router device ID
+ dw 0x7000 ;; compatible PCI interrupt router device ID
dw 0,0 ;; Miniport data
db 0,0,0,0,0,0,0,0,0,0,0 ;; reserved
- db 0x37 ;; checksum
+ db 0xA7 ;; checksum
pci_routing_table_structure_start:
;; first slot entry PCI-to-ISA (embedded)
db 0 ;; pci bus number
- db 0x08 ;; pci device number (bit 7-3)
+ db 0x38 ;; pci device number (bit 7-3)
db 0x60 ;; link value INTA#: pointer into PCI2ISA config space
dw 0xdef8 ;; IRQ bitmap INTA#
db 0x61 ;; link value INTB#
diff --git a/bios/rombios.h b/bios/rombios.h
index 6f9cbb1..649f228 100644
--- a/bios/rombios.h
+++ b/bios/rombios.h
@@ -26,7 +26,7 @@
#else
# define BX_ROMBIOS32 0
#endif
-#define DEBUG_ROMBIOS 0
+#define DEBUG_ROMBIOS 1
#define PANIC_PORT 0x400
#define PANIC_PORT2 0x401
diff --git a/bios/rombios32.c b/bios/rombios32.c
index 7be4216..2bd902b 100644
--- a/bios/rombios32.c
+++ b/bios/rombios32.c
@@ -682,6 +682,7 @@ void smp_probe(void)
#define PCI_VENDOR_ID_INTEL 0x8086
#define PCI_DEVICE_ID_INTEL_82441 0x1237
+#define PCI_DEVICE_ID_INTEL_82443 0x7190
#define PCI_DEVICE_ID_INTEL_82371SB_0 0x7000
#define PCI_DEVICE_ID_INTEL_82371SB_1 0x7010
#define PCI_DEVICE_ID_INTEL_82371AB_0 0x7110
@@ -850,7 +851,7 @@ static void pci_bios_init_bridges(PCIDevice *d)
outb(0x4d1, elcr[1]);
BX_INFO("PIIX3/PIIX4 init: elcr=%02x %02x\n",
elcr[0], elcr[1]);
- } else if (vendor_id == PCI_VENDOR_ID_INTEL && device_id == PCI_DEVICE_ID_INTEL_82441) {
+ } else if (vendor_id == PCI_VENDOR_ID_INTEL && (device_id == PCI_DEVICE_ID_INTEL_82441 || device_id == PCI_DEVICE_ID_INTEL_82443)) {
/* i440 PCI bridge */
bios_shadow_init(d);
}
[-- Attachment #3: qemu-piix4.patch --]
[-- Type: text/plain, Size: 1921 bytes --]
--- hw/pc.c.orig 2009-03-04 22:54:45.000000000 +0000
+++ hw/pc.c 2009-03-17 07:47:58.120091474 +0000
@@ -938,7 +941,7 @@
if (pci_enabled) {
pci_bus = i440fx_init(&i440fx_state, i8259);
- piix3_devfn = piix3_init(pci_bus, -1);
+ piix3_devfn = piix4_init(pci_bus, 7 << 3);
} else {
pci_bus = NULL;
}
@@ -1031,7 +1034,7 @@
}
if (pci_enabled) {
- pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1, i8259);
+ pci_piix4_ide_init(pci_bus, hd, piix3_devfn + 1, i8259);
} else {
for(i = 0; i < MAX_IDE_BUS; i++) {
isa_ide_init(ide_iobase[i], ide_iobase2[i], i8259[ide_irq[i]],
@@ -1057,7 +1060,7 @@
cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device, hd);
if (pci_enabled && usb_enabled) {
- usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
+ usb_uhci_piix4_init(pci_bus, piix3_devfn + 2);
}
if (pci_enabled && acpi_enabled) {
--- hw/pci.h.orig 2009-03-17 15:45:59.809589980 +0000
+++ hw/pci.h 2009-03-17 15:46:27.931350921 +0000
@@ -104,6 +104,7 @@
#define PCI_VENDOR_ID_INTEL 0x8086
#define PCI_DEVICE_ID_INTEL_82441 0x1237
+#define PCI_DEVICE_ID_INTEL_82443 0x7190
#define PCI_DEVICE_ID_INTEL_82801AA_5 0x2415
#define PCI_DEVICE_ID_INTEL_82371SB_0 0x7000
#define PCI_DEVICE_ID_INTEL_82371SB_1 0x7010
--- hw/piix_pci.c.orig 2009-03-04 22:54:45.000000000 +0000
+++ hw/piix_pci.c 2009-03-17 15:45:35.327745232 +0000
@@ -193,7 +193,7 @@
NULL, i440fx_write_config);
pci_config_set_vendor_id(d->config, PCI_VENDOR_ID_INTEL);
- pci_config_set_device_id(d->config, PCI_DEVICE_ID_INTEL_82441);
+ pci_config_set_device_id(d->config, PCI_DEVICE_ID_INTEL_82443);
d->config[0x08] = 0x02; // revision
pci_config_set_class(d->config, PCI_CLASS_BRIDGE_HOST);
d->config[0x0e] = 0x00; // header_type
next reply other threads:[~2009-03-17 16:00 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-17 15:58 Andriy Gapon [this message]
2009-03-17 16:00 ` [Qemu-devel] Re: patch: (attempt to) emulate 440BX/PIIX4 Andriy Gapon
2009-03-18 13:32 ` Andriy Gapon
2009-03-18 16:12 ` Re : " Sylvain Petreolle
2009-03-19 14:56 ` [Qemu-devel] Re: Re : " Andriy Gapon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49BFC8B0.2060609@icyb.net.ua \
--to=avg@icyb.net.ua \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.