Hauppauge HVR-1500 (aka HP RM436AA#ABA)

Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[T J]

The code compiles. Okay, great.  Can anyone actually use this thing in
Linux? I can't on my 1-year-old HP dv-6629. Thank you.

RE: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[Thomas Nicolai]

I have tried a few different settings, and tired updating the drivers with HG pull, but I just can't get it to work.  Glad to hear I am not the only one having problems with this.  If you get anywhere let me know what you did, I will try to do likewise.


Tom

> Date: Fri, 17 Apr 2009 04:07:30 -0500
> Subject: Hauppauge HVR-1500 (aka HP RM436AA#ABA)
> From: zenith1963@gmail.com
> To: linux-media@vger.kernel.org
> 
> The code compiles. Okay, great.  Can anyone actually use this thing in
> Linux? I can't on my 1-year-old HP dv-6629. Thank you.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

_________________________________________________________________
Rediscover Hotmail®: Get e-mail storage that grows with you. 
http://windowslive.com/RediscoverHotmail?ocid=TXT_TAGLM_WL_HM_Rediscover_Storage2_042009

Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[Steven Toth]

Thomas Nicolai wrote:
> I have tried a few different settings, and tired updating the drivers with HG pull, but I just can't get it to work.  Glad to hear I am not the only one having problems with this.  If you get anywhere let me know what you did, I will try to do likewise.
> 
> 
> Tom
> 
>> Date: Fri, 17 Apr 2009 04:07:30 -0500
>> Subject: Hauppauge HVR-1500 (aka HP RM436AA#ABA)
>> From: zenith1963@gmail.com
>> To: linux-media@vger.kernel.org
>>
>> The code compiles. Okay, great.  Can anyone actually use this thing in
>> Linux? I can't on my 1-year-old HP dv-6629. Thank you.

Or, you could both discuss your issues openly on the list and perhaps someone 
may have an idea as to why your having specific issues.

- Steve

Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[Ben Heggy]

I'm having the same issues (recognized - but won't turn on) with the same card
and would be delighted to join the open discussion and to try to help to provide
any information necessary to debug this issue. 

To this point, I have enabled debug options on what I think are the related
modules and have seen nothing that appears to be an error, but am also noticing
that there should be some messages about loading firmware for the various chips
and they don't appear (I did put the firmware files in /lib/firmware but I
cannot find references to their correct md5sums to verify they are correct)

I'm a newbie to linux, but was once (20 years ago) a system manager on a
vax/unix system, so I can find my way around a bit better than average.

Tell me what info you want to see or what actions to try and I will gladly act
immediately.

Ben (pghben@yahoo.com)

Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[Steven Toth]

Ben Heggy wrote:
> I'm having the same issues (recognized - but won't turn on) with the same card
> and would be delighted to join the open discussion and to try to help to provide
> any information necessary to debug this issue. 
> 
> To this point, I have enabled debug options on what I think are the related
> modules and have seen nothing that appears to be an error, but am also noticing
> that there should be some messages about loading firmware for the various chips
> and they don't appear (I did put the firmware files in /lib/firmware but I
> cannot find references to their correct md5sums to verify they are correct)
> 
> I'm a newbie to linux, but was once (20 years ago) a system manager on a
> vax/unix system, so I can find my way around a bit better than average.
> 
> Tell me what info you want to see or what actions to try and I will gladly act
> immediately.

Connect the card.

Cold boot the system, boot linux, use the dmesg command.

Do you see any evidence of the cx23885 driver recognizing your card?

Use the lspci -vn command to display attached PCI(e) devices, is the card present?

- Steve

Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[Steven Toth]

Benster & Jeremy wrote:
> Here is the relevant part of dmesg output:
> ....snip....
> [   18.088998] Linux video capture interface: v2.00
> ....snip....
> [   18.455776] cx23885 driver version 0.0.1 loaded
> [   18.459188] ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 17
> [   18.459205] cx23885 0000:01:00.0: PCI INT A -> Link[LK2E] -> GSI 17 
> (level, high) -> IRQ 17
> [   18.461662] CORE cx23885[0]: subsystem: 0070:7717, board: Hauppauge 
> WinTV-HVR1500 [card=6,autodetected]
> [   18.570050] cx23885[0]: i2c bus 0 registered
> [   18.570196] cx23885[0]: i2c bus 1 registered
> [   18.570252] cx23885[0]: i2c bus 2 registered
> [   18.596795] tveeprom 2-0050: Hauppauge model 77001, rev D3C0, serial# 
> 1624435
> [   18.596800] tveeprom 2-0050: MAC address is 00-0D-FE-18-C9-73
> [   18.596803] tveeprom 2-0050: tuner model is Xceive XC3028 (idx 120, 
> type 71)
> [   18.596807] tveeprom 2-0050: TV standards NTSC(M) ATSC/DVB Digital 
> (eeprom 0x88)
> [   18.596810] tveeprom 2-0050: audio processor is CX23885 (idx 39)
> [   18.596813] tveeprom 2-0050: decoder processor is CX23885 (idx 33)
> [   18.596816] tveeprom 2-0050: has no radio
> [   18.596818] cx23885[0]: hauppauge eeprom: model=77001
> [   18.596822] cx23885[0]: cx23885 based dvb card
> ....snip....
> [   18.765151] phy0: Selected rate control algorithm 'pid'
> [   18.801503] xc2028 3-0061: creating new instance
> [   18.801509] xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
> [   18.801517] DVB: registering new adapter (cx23885[0])
> [   18.801522] DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB 
> Frontend)...
> [   18.802148] cx23885_dev_checkrevision() Hardware revision = 0xb0
> [   18.802157] cx23885[0]/0: found at 0000:01:00.0, rev: 2, irq: 17, 
> latency: 0, mmio: 0xc4000000
> [   19.802164] cx23885 0000:01:00.0: setting latency timer to 64
> 
> and lspci:
> 
> ....snip....
> #I'm leaving this in since it mentions i2c
> 00:0a.1 0c05: 10de:0264 (rev a3)
> Subsystem: 103c:30b7
> Flags: 66MHz, fast devsel, IRQ 10
> I/O ports at 3040 [size=64]
> I/O ports at 3000 [size=64]
> Capabilities: [44] Power Management version 2
> Kernel driver in use: nForce2_smbus
> Kernel modules: i2c-nforce2
> ....snip....
> 01:00.0 0400: 14f1:8852 (rev 02)
> Subsystem: 0070:7717
> Flags: bus master, fast devsel, latency 0, IRQ 17
> Memory at c4000000 (64-bit, non-prefetchable) [size=2M]
> Capabilities: [40] Express Endpoint, MSI 00
> Capabilities: [80] Power Management version 2
> Capabilities: [90] Vital Product Data <?>
> Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
> Enable-
> Capabilities: [100] Advanced Error Reporting <?>
> Capabilities: [200] Virtual Channel <?>
> Kernel driver in use: cx23885
> Kernel modules: cx23885
> ....snip....
> 07:05.4 0880: 1180:0852 (rev ff) (prog-if ff)
> !!! Unknown header type 7f
> ....snip....
> 
> I think I may not have the debug=1 options turned on right now. I will 
> turn them on and re-post if that would help you.
> 
> Ben
> 
> On Mon, 2009-04-20 at 11:51 -0400, Steven Toth wrote:
>> Ben Heggy wrote:
>> > I'm having the same issues (recognized - but won't turn on) with the same card
>> > and would be delighted to join the open discussion and to try to help to provide
>> > any information necessary to debug this issue. 
>> > 
>> > To this point, I have enabled debug options on what I think are the related
>> > modules and have seen nothing that appears to be an error, but am also noticing
>> > that there should be some messages about loading firmware for the various chips
>> > and they don't appear (I did put the firmware files in /lib/firmware but I
>> > cannot find references to their correct md5sums to verify they are correct)
>> > 
>> > I'm a newbie to linux, but was once (20 years ago) a system manager on a
>> > vax/unix system, so I can find my way around a bit better than average.
>> > 
>> > Tell me what info you want to see or what actions to try and I will gladly act
>> > immediately.
>>
>> Connect the card.
>>
>> Cold boot the system, boot linux, use the dmesg command.
>>
>> Do you see any evidence of the cx23885 driver recognizing your card?
>>
>> Use the lspci -vn command to display attached PCI(e) devices, is the card present?
>>
>> - Steve

(A minor thing, please don't top post. Replies go under the previous messages - 
that's mailing list protocol)

Thanks, initialization looks good.

Step 2. What happens when you try to use azap and what does syslog subsequently 
look like?

- Steve

Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[Steven Toth]

>>
>> Step 2. What happens when you try to use azap and what does syslog subsequently 
>> look like?
>>
>> - Steve
> Since there is no channels.conf file by default,  in the past, I have 
> tried using w_scan to generate one.

If you know MCE works then put you zip into antennaweb.org and find out the 
physical channels and create a channels.conf by hand. Match the channels that 
work on MCE mentally with one or two channels you want to tune under linux.

So, under MCE find a major network ABC, NBC or CBS that works perfectly for you 
then locate the RF channel on antenna web.org.

Report back here with the RF channel reported by antennaweb for a couple of 
channels and I'll help you with a fake channels.conf.

> This slowly scans all through all frequencies, though the light on the 
> tuner card does not come on. At the end it says no channels found and 
> does not create the channels.conf file.
> While I am trying to tune in over-the-air signals in a fairly rural 
> area, the card works on 20+ channels in mce.

Agreed, w_scan not working is interesting.

> 
> Today, I just used a channels.conf file for broadcast channels in a 
> different us city which I found posted online and tuned to an arbitrary 
> channel. Still no activity light. status fields in azap ouput are 0 
> signals and noise both 87.
> 
> But the good news is that dmesg says it loaded the firmware for at least 
> part of the card:
> ....snip.....
> [12250.084481] firmware: requesting xc3028-v27.fw
> [12250.113053] xc2028 3-0061: Loading 80 firmware images from 
> xc3028-v27.fw, type: xc2028 firmware, ver 2.7
> [12250.140031] xc2028 3-0061: Loading firmware for type=BASE (1), id 
> 0000000000000000.
> [12251.105854] xc2028 3-0061: Loading firmware for type=D2633 DTV6 ATSC 
> (10030), id 0000000000000000.
> ....snip....

This is good news, the card and driver look fine. You probably just need a 
channels.conf (and perhaps w_scan has a bug?).

I don't use w_scan so I can't comment much on this.

> 
> Thank you so much for looking at this. I cannot begin to tell you how 
> much I appreciate it. I hope it is just something small, or something I 
> am doing wrong that is keeping this from working.

Probably.

> 
> Ben
> p.s. sorry about the faux-pas
> 

That's fine. :)

- Steve

RE: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[Thomas Nicolai]

My card shows similar dmesg and similar activity (no lights come on, scans take a long time under mythtv)  Iget 6 or 7 channels in Wintv V6 in windows and 4 in MCE in windows.  I do need to get my antenna up higher, but I should be able to get the same channels in mythtv as I can under windows.

I will try a fake channels.conf if someone can post one so I can get an idea what it should look like.


Thanks,

Tom
----------------------------------------
> Date: Mon, 20 Apr 2009 14:20:32 -0400
> From: stoth@linuxtv.org
> Subject: Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)
> To: linux-media@vger.kernel.org
>
>>>
>>> Step 2. What happens when you try to use azap and what does syslog subsequently
>>> look like?
>>>
>>> - Steve
>> Since there is no channels.conf file by default, in the past, I have
>> tried using w_scan to generate one.
>
> If you know MCE works then put you zip into antennaweb.org and find out the
> physical channels and create a channels.conf by hand. Match the channels that
> work on MCE mentally with one or two channels you want to tune under linux.
>
> So, under MCE find a major network ABC, NBC or CBS that works perfectly for you
> then locate the RF channel on antenna web.org.
>
> Report back here with the RF channel reported by antennaweb for a couple of
> channels and I'll help you with a fake channels.conf.
>
>> This slowly scans all through all frequencies, though the light on the
>> tuner card does not come on. At the end it says no channels found and
>> does not create the channels.conf file.
>> While I am trying to tune in over-the-air signals in a fairly rural
>> area, the card works on 20+ channels in mce.
>
> Agreed, w_scan not working is interesting.
>
>>
>> Today, I just used a channels.conf file for broadcast channels in a
>> different us city which I found posted online and tuned to an arbitrary
>> channel. Still no activity light. status fields in azap ouput are 0
>> signals and noise both 87.
>>
>> But the good news is that dmesg says it loaded the firmware for at least
>> part of the card:
>> ....snip.....
>> [12250.084481] firmware: requesting xc3028-v27.fw
>> [12250.113053] xc2028 3-0061: Loading 80 firmware images from
>> xc3028-v27.fw, type: xc2028 firmware, ver 2.7
>> [12250.140031] xc2028 3-0061: Loading firmware for type=BASE (1), id
>> 0000000000000000.
>> [12251.105854] xc2028 3-0061: Loading firmware for type=D2633 DTV6 ATSC
>> (10030), id 0000000000000000.
>> ....snip....
>
> This is good news, the card and driver look fine. You probably just need a
> channels.conf (and perhaps w_scan has a bug?).
>
> I don't use w_scan so I can't comment much on this.
>
>>
>> Thank you so much for looking at this. I cannot begin to tell you how
>> much I appreciate it. I hope it is just something small, or something I
>> am doing wrong that is keeping this from working.
>
> Probably.
>
>>
>> Ben
>> p.s. sorry about the faux-pas
>>
>
> That's fine. :)
>
> - Steve
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

_________________________________________________________________
Windows Live™: Keep your life in sync.
http://windowslive.com/explore?ocid=TXT_TAGLM_WL_allup_1a_explore_042009

Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[Steven Toth]

>> So, under MCE find a major network ABC, NBC or CBS that works perfectly for you 
>> then locate the RF channel on antenna web.org.

> These all come in fine on mce.
> 
> KDKA-DT    2.1    25
> WTAE-DT    4.1    51
> WQED-DT 13.1    38

(Rule #2, always CC the mailing list. Don't drop them off, even by accident. An 
honest mistake on your part so I've added them back in.)

Modify your $HOME/.azap/channels.conf to look like this:

ch25:539000000:8VSB:65:68:4
ch38:614000000:8VSB:65:68:4
ch51:695000000:8VSB:65:68:4

The use the following command to tune ch25:

azap -r ch25

What happens next?

- Steve

Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[Benster & Jeremy]

On Mon, 2009-04-20 at 16:04 -0400, Steven Toth wrote:
> >> So, under MCE find a major network ABC, NBC or CBS that works perfectly for you 
> >> then locate the RF channel on antenna web.org.
> 
> > These all come in fine on mce.
> > 
> > KDKA-DT    2.1    25
> > WTAE-DT    4.1    51
> > WQED-DT 13.1    38
> 
> (Rule #2, always CC the mailing list. Don't drop them off, even by accident. An 
> honest mistake on your part so I've added them back in.)
> 
> Modify your $HOME/.azap/channels.conf to look like this:
> 
> ch25:539000000:8VSB:65:68:4
> ch38:614000000:8VSB:65:68:4
> ch51:695000000:8VSB:65:68:4
> 
> The use the following command to tune ch25:
> 
> azap -r ch25
> 
> What happens next?
> 
> - Steve
> 
No indicator light - I know this is probably just a bit set somewhere
that turns on/off the light and has nothing to do with actual operation
of the card, but thought I would mention it.

using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 539000000 Hz
video pid 0x0041, audio pid 0x0044
status 00 | signal 7fe2 | snr 0000 | ber 00000000 | unc 00000000 |
status 00 | signal 008c | snr 0082 | ber 00000000 | unc 00000000 |
....last line repeats indefinitely.....I hit ^c.

tried a second time - now all lines match last line and again I hit ^c.
also the same as the second line for the other two channels.

Something I forgot to mention, if you remove the card with the system
running linux it results in a freeze with a blinking caps lock led (btw
it's a hp dv9208nr laptop). It's ok under windows (32bit). I am running
64 bit linux.

If I insert the card after booting linux without it, the lines
referencing the card do not get added to dmesg's output, and the /dev
entries do not appear. udevd issue or driver?

I don't have any other expresscards that I could plug-in to see if hot
swap works on other things.

Ben
oops on the reply list. It has been a long time since I wrote to a mail
list. I did catch one thing before you needed to tell me - i switched to
plain text from html mail. 

> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[Steven Toth]

Benster & Jeremy wrote:
> On Mon, 2009-04-20 at 16:04 -0400, Steven Toth wrote:
>>>> So, under MCE find a major network ABC, NBC or CBS that works perfectly for you 
>>>> then locate the RF channel on antenna web.org.
>>> These all come in fine on mce.
>>>
>>> KDKA-DT    2.1    25
>>> WTAE-DT    4.1    51
>>> WQED-DT 13.1    38
>> (Rule #2, always CC the mailing list. Don't drop them off, even by accident. An 
>> honest mistake on your part so I've added them back in.)
>>
>> Modify your $HOME/.azap/channels.conf to look like this:
>>
>> ch25:539000000:8VSB:65:68:4
>> ch38:614000000:8VSB:65:68:4
>> ch51:695000000:8VSB:65:68:4
>>
>> The use the following command to tune ch25:
>>
>> azap -r ch25
>>
>> What happens next?
>>
>> - Steve
>>
> No indicator light - I know this is probably just a bit set somewhere
> that turns on/off the light and has nothing to do with actual operation
> of the card, but thought I would mention it.
> 
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> tuning to 539000000 Hz
> video pid 0x0041, audio pid 0x0044
> status 00 | signal 7fe2 | snr 0000 | ber 00000000 | unc 00000000 |
> status 00 | signal 008c | snr 0082 | ber 00000000 | unc 00000000 |
> ....last line repeats indefinitely.....I hit ^c.
> 
> tried a second time - now all lines match last line and again I hit ^c.
> also the same as the second line for the other two channels.
> 
> Something I forgot to mention, if you remove the card with the system
> running linux it results in a freeze with a blinking caps lock led (btw
> it's a hp dv9208nr laptop). It's ok under windows (32bit). I am running
> 64 bit linux.
> 
> If I insert the card after booting linux without it, the lines
> referencing the card do not get added to dmesg's output, and the /dev
> entries do not appear. udevd issue or driver?

Hot swap is not supported, always cold boot with the device inserted.

> 
> I don't have any other expresscards that I could plug-in to see if hot
> swap works on other things.
> 
> Ben
> oops on the reply list. It has been a long time since I wrote to a mail
> list. I did catch one thing before you needed to tell me - i switched to
> plain text from html mail. 

I tested a 77001 D3C0 rev and it doesn't locked for me either.

This used to work. Either the xc3028 or s5h1409 driver has a regression.

End result: Bug, broken. Thanks for highlighting this.

- Steve

Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[Steven Toth]

> If there is anything I can do that will help you find the bug, please 
> let me know..
> 
> I want to thank you again for being so patient, helpful, and attentive. 
> I really do appreciate it.

You're welcome.

I'll look into this tonight and see what I can find.

- Steve

Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[Benster & Jeremy]

The patch works perfectly. 
No indicator light, but 28 channels with stronger signal than mce!

Thanks again!

Ben

Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[Steven Toth]

Benster & Jeremy wrote:
> The patch works perfectly. 
> No indicator light, but 28 channels with stronger signal than mce!

Good, thanks for the feedback.

Ignore the light, it's a visual indicator only. At some point we'll get back to 
fixing that.

Regards,

- Steve

Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[wk]

Benster & Jeremy wrote:
> The patch works perfectly. 
> No indicator light, but 28 channels with stronger signal than mce!
>
> Thanks again!
>
> Ben
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>   
Can you pls give some hint wether w_scan now also works with your card?

--winfried

Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[Steven Toth]

> 
> If there is anything I can do that will help you find the bug, please 
> let me know..

The issue is fixed.

http://linuxtv.org/hg/~stoth/cx23885-hvr1500/rev/7853c00870e1

It's locking OK for me now. If you can clone, built and test - thus confirm the 
fix - that would be great.

Build instructions on the wiki:

http://linuxtv.org/wiki/index.php/How_to_Obtain%2C_Build_and_Install_V4L-DVB_Device_Drivers

Thanks,

- Steve

RE: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[Thomas Nicolai]

I tried updating it just a few minutes ago.  After a restart, I tried using the card.  I still get no lights on the card and get no lock on any channels.  with MCE in windows I get about 6 channels at my location, all with very good signal strength.  


Here is my output from lspci -vnn followed by the out put from dmesg.  I am sorry it is so long, I wanted to include it all in case you see something I missed.


 lspci -vnn
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910]
    Subsystem: Toshiba America Info Systems Device [1179:ff00]
    Flags: bus master, 66MHz, medium devsel, latency 64

00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912]
    Flags: bus master, 66MHz, medium devsel, latency 64
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
    I/O behind bridge: 00009000-00009fff
    Memory behind bridge: f8200000-f83fffff
    Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
    Capabilities: 
    Kernel modules: shpchp

00:05.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1) [1002:7915]
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=0b, subordinate=10, sec-latency=0
    Memory behind bridge: f8000000-f81fffff
    Capabilities: 
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

00:06.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) [1002:7916]
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=11, subordinate=11, sec-latency=0
    I/O behind bridge: 0000a000-0000afff
    Memory behind bridge: f8500000-f85fffff
    Prefetchable memory behind bridge: 00000000f8700000-00000000f87fffff
    Capabilities: 
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917]
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=17, subordinate=17, sec-latency=0
    Memory behind bridge: f8400000-f84fffff
    Capabilities: 
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01)
    Subsystem: Toshiba America Info Systems Device [1179:ff00]
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22
    I/O ports at 8440 [size=8]
    I/O ports at 8434 [size=4]
    I/O ports at 8438 [size=8]
    I/O ports at 8430 [size=4]
    I/O ports at 8400 [size=16]
    Memory at f8909000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: 
    Kernel driver in use: ahci
    Kernel modules: ahci

00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10)
    Subsystem: Toshiba America Info Systems Device [1179:ff00]
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
    Memory at f8904000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd

00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10)
    Subsystem: Toshiba America Info Systems Device [1179:ff00]
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
    Memory at f8905000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd

00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10)
    Subsystem: Toshiba America Info Systems Device [1179:ff00]
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
    Memory at f8906000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd

00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10)
    Subsystem: Toshiba America Info Systems Device [1179:ff00]
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
    Memory at f8907000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd

00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10)
    Subsystem: Toshiba America Info Systems Device [1179:ff00]
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
    Memory at f8908000 (32-bit, non-prefetchable) [size=4K]
    Kernel driver in use: ohci_hcd
    Kernel modules: ohci-hcd

00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20)
    Subsystem: Toshiba America Info Systems Device [1179:ff00]
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
    Memory at f8909400 (32-bit, non-prefetchable) [size=256]
    Capabilities: 
    Kernel driver in use: ehci_hcd
    Kernel modules: ehci-hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
    Subsystem: Toshiba America Info Systems Device [1179:ff00]
    Flags: 66MHz, medium devsel
    I/O ports at 8410 [size=16]
    Capabilities: 
    Kernel driver in use: piix4_smbus
    Kernel modules: i2c-piix4

00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP])
    Subsystem: Toshiba America Info Systems Device [1179:ff00]
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
    I/O ports at 01f0 [size=8]
    I/O ports at 03f4 [size=1]
    I/O ports at 0170 [size=8]
    I/O ports at 0374 [size=1]
    I/O ports at 8420 [size=16]
    Kernel driver in use: pata_atiixp
    Kernel modules: ata_generic, pata_acpi, pata_atiixp

00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
    Subsystem: Toshiba America Info Systems Device [1179:ff08]
    Flags: bus master, slow devsel, latency 64, IRQ 16
    Memory at f8900000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: 
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel

00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
    Subsystem: Toshiba America Info Systems Device [1179:ff00]
    Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01)
    Flags: bus master, 66MHz, medium devsel, latency 64
    Bus: primary=00, secondary=1d, subordinate=21, sec-latency=64
    I/O behind bridge: 00002000-00002fff
    Memory behind bridge: f8600000-f86fffff
    Prefetchable memory behind bridge: 20000000-23ffffff

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
    Flags: fast devsel
    Capabilities: 

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
    Flags: fast devsel

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
    Flags: fast devsel

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
    Flags: fast devsel
    Capabilities: 
    Kernel driver in use: k8temp
    Kernel modules: k8temp

01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690M [Radeon X1200 Series] [1002:791f]
    Subsystem: Toshiba America Info Systems Device [1179:ff00]
    Flags: bus master, fast devsel, latency 64, IRQ 18
    Memory at f0000000 (64-bit, prefetchable) [size=128M]
    Memory at f8300000 (64-bit, non-prefetchable) [size=64K]
    I/O ports at 9000 [size=256]
    Memory at f8200000 (32-bit, non-prefetchable) [size=1M]
    Capabilities: 

0b:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 02)
    Subsystem: Hauppauge computer works Inc. Device [0070:7717]
    Flags: bus master, fast devsel, latency 0, IRQ 17
    Memory at f8000000 (64-bit, non-prefetchable) [size=2M]
    Capabilities: 
    Kernel driver in use: cx23885
    Kernel modules: cx23885

11:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 01)
    Subsystem: Toshiba America Info Systems Device [1179:ff00]
    Flags: bus master, fast devsel, latency 0, IRQ 2300
    I/O ports at a000 [size=256]
    Memory at f8500000 (64-bit, non-prefetchable) [size=4K]
    [virtual] Expansion ROM at f8700000 [disabled] [size=128K]
    Capabilities: 
    Kernel driver in use: r8169
    Kernel modules: r8169

17:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter [168c:001c] (rev 01)
    Subsystem: Askey Computer Corp. Device [144f:7128]
    Flags: bus master, fast devsel, latency 0, IRQ 19
    Memory at f8400000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: 
    Kernel driver in use: ndiswrapper
    Kernel modules: ath_pci

1d:04.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
    Subsystem: Toshiba America Info Systems Device [1179:ff00]
    Flags: bus master, medium devsel, latency 168, IRQ 20
    Memory at f8604000 (32-bit, non-prefetchable) [size=4K]
    Bus: primary=1d, secondary=1e, subordinate=21, sec-latency=176
    Memory window 0: 20000000-23fff000 (prefetchable)
    Memory window 1: 24000000-27fff000
    I/O window 0: 00002000-000020ff
    I/O window 1: 00002400-000024ff
    16-bit legacy interface ports at 0001
    Kernel driver in use: yenta_cardbus
    Kernel modules: yenta_socket

1d:04.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a] (prog-if 10)
    Subsystem: Toshiba America Info Systems Device [1179:ff00]
    Flags: bus master, medium devsel, latency 64, IRQ 21
    Memory at f8606000 (32-bit, non-prefetchable) [size=2K]
    Memory at f8600000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: 
    Kernel driver in use: ohci1394
    Kernel modules: ohci1394

1d:04.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
    Subsystem: Toshiba America Info Systems Device [1179:ff00]
    Flags: bus master, medium devsel, latency 64, IRQ 22
    Memory at f8605000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: 
    Kernel driver in use: tifm_7xx1
    Kernel modules: tifm_7xx1

1d:04.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c] (prog-if 01)
    Subsystem: Toshiba America Info Systems Device [1179:ff00]
    Flags: bus master, medium devsel, latency 64, IRQ 22
    Memory at f8606800 (32-bit, non-prefetchable) [size=256]
    Capabilities: 
    Kernel driver in use: sdhci-pci
    Kernel modules: sdhci-pci


dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.27-14-generic (buildd@yellow) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #1 SMP Fri Mar 13 19:54:51 UTC 2009 (Ubuntu 2.6.27-14.30-generic)
[    0.000000] Command line: root=UUID=8d821240-ec00-40c1-bd73-cebd72066c6d ro quiet splash 
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000d7e70000 (usable)
[    0.000000]  BIOS-e820: 00000000d7e70000 - 00000000d7e83000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000d7e83000 - 00000000d7e85000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000d7e85000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[    0.000000] DMI present.
[    0.000000] last_pfn = 0x120000 max_arch_pfn = 0x3ffffffff
[    0.000000] last_pfn = 0xd7e70 max_arch_pfn = 0x3ffffffff
[    0.000000] init_memory_mapping
[    0.000000]  0000000000 - 00d7e00000 page 2M
[    0.000000]  00d7e00000 - 00d7e70000 page 4k
[    0.000000] kernel direct mapping tables up to d7e70000 @ 8000-e000
[    0.000000] last_map_addr: d7e70000 end: d7e70000
[    0.000000] init_memory_mapping
[    0.000000]  0100000000 - 0120000000 page 2M
[    0.000000] kernel direct mapping tables up to 120000000 @ c000-12000
[    0.000000] last_map_addr: 120000000 end: 120000000
[    0.000000] RAMDISK: 377a7000 - 37feff51
[    0.000000] ACPI: RSDP 000F7260, 0024 (r2 TOSCPL)
[    0.000000] ACPI: XSDT D7E7AA18, 0064 (r1 TOSCPL TOSCPL00  6040000  LTP        0)
[    0.000000] ACPI: FACP D7E828F7, 00F4 (r3 TOSCPL Herring   6040000 ATI     F4240)
[    0.000000] ACPI: DSDT D7E7AA7C, 7E7B (r1 TOSCPL    SB600  6040000 MSFT  3000000)
[    0.000000] ACPI: FACS D7E84FC0, 0040
[    0.000000] ACPI: TCPA D7E82A5F, 0032 (r2 TOSCPL           6040000 PTEC        0)
[    0.000000] ACPI: SLIC D7E82A91, 0176 (r1 TOSCPL TOSCPL00  6040000 LOHR        0)
[    0.000000] ACPI: SSDT D7E82C07, 0206 (r1 PTLTD  POWERNOW  6040000  LTP        1)
[    0.000000] ACPI: APIC D7E82E0D, 0054 (r1 PTLTD       APIC    6040000  LTP        0)
[    0.000000] ACPI: MCFG D7E82E61, 003C (r1 PTLTD    MCFG    6040000  LTP        0)
[    0.000000] ACPI: HPET D7E82E9D, 0038 (r1 PTLTD  HPETTBL   6040000  LTP        1)
[    0.000000] ACPI: ASF! D7E82ED5, 012B (r32    DMA AMDTBL    6040000 PTL         1)
[    0.000000] ACPI: DMI detected: Toshiba
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000120000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000120000000
[    0.000000]   NODE_DATA [0000000000001000 - 0000000000005fff]
[    0.000000]   bootmap [000000000000d000 -  0000000000030fff] pages 24
[    0.000000] (7 early reservations) ==> bootmem [0000000000 - 0120000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0000200000 - 00008bbf5c]    TEXT DATA BSS ==> [0000200000 - 00008bbf5c]
[    0.000000]   #3 [00377a7000 - 0037feff51]          RAMDISK ==> [00377a7000 - 0037feff51]
[    0.000000]   #4 [000009dc00 - 0000100000]    BIOS reserved ==> [000009dc00 - 0000100000]
[    0.000000]   #5 [0000008000 - 000000c000]          PGTABLE ==> [0000008000 - 000000c000]
[    0.000000]   #6 [000000c000 - 000000d000]          PGTABLE ==> [000000c000 - 000000d000]
[    0.000000] found SMP MP-table at [ffff8800000f7300] 000f7300
[    0.000000]  [ffffe20000000000-ffffe200047fffff] PMD -> [ffff880028200000-ffff88002bffffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00120000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x000d7e70
[    0.000000]     0: 0x00100000 -> 0x00120000
[    0.000000] On node 0 totalpages: 1015309
[    0.000000]   DMA zone: 2102 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 863920 pages, LIFO batch:31
[    0.000000]   Normal zone: 129024 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x43538310 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000d7e70000 - 00000000d7e83000
[    0.000000] PM: Registered nosave memory: 00000000d7e83000 - 00000000d7e85000
[    0.000000] PM: Registered nosave memory: 00000000d7e85000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at f1000000 (gap: f0000000:ec00000)
[    0.000000] PERCPU: Allocating 64928 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 995046
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=UUID=8d821240-ec00-40c1-bd73-cebd72066c6d ro quiet splash 
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] TSC: PIT calibration confirmed by PMTIMER.
[    0.000000] TSC: using PMTIMER calibration value
[    0.000000] Detected 1895.242 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Checking aperture...
[    0.004000] No AGP bridge found
[    0.004000] Node 0: aperture @ 264000000 size 32 MB
[    0.004000] Aperture beyond 4GB. Ignoring.
[    0.004000] Your BIOS doesn't leave a aperture memory hole
[    0.004000] Please enable the IOMMU option in the BIOS setup
[    0.004000] This costs you 64 MB of RAM
[    0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
[    0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[    0.004000] Memory: 3916456k/4718592k available (3119k kernel code, 144780k reserved, 1577k data, 540k init)
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.004000] hpet clockevent registered
[    0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3790.48 BogoMIPS (lpj=7580968)
[    0.004039] Security Framework initialized
[    0.004046] SELinux:  Disabled at boot.
[    0.004062] AppArmor: AppArmor initialized
[    0.004478] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.007476] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.008765] Mount-cache hash table entries: 256
[    0.008970] Initializing cgroup subsys ns
[    0.008975] Initializing cgroup subsys cpuacct
[    0.008977] Initializing cgroup subsys memory
[    0.008995] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.008997] CPU: L2 Cache: 512K (64 bytes/line)
[    0.009000] CPU 0/0 -> Node 0
[    0.009002] tseg: 00d7f00000
[    0.009003] CPU: Physical Processor ID: 0
[    0.009005] CPU: Processor Core ID: 0
[    0.009016] using C1E aware idle routine
[    0.010508] ACPI: Core revision 20080609
[    0.013485] ACPI: Checking initramfs for custom DSDT
[    0.412470] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.416026] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.416026] ...trying to set up timer (IRQ0) through the 8259A ...
[    0.416026] ..... (found apic 0 pin 0) ...
[    0.459113] ....... works.
[    0.459115] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 02
[    0.459120] Using local APIC timer interrupts.
[    0.460030] APIC timer calibration result 12468701
[    0.460032] Detected 12.468 MHz APIC timer.
[    0.460218] Booting processor 1/1 ip 6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 3790.53 BogoMIPS (lpj=7581060)
[    0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[    0.004000] CPU 1/1 -> Node 0
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.004000] System has AMD C1E enabled
[    0.004000] Switch to broadcast mode on CPU1
[    0.548294] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 02
[    0.548309] Brought up 2 CPUs
[    0.548312] Total of 2 processors activated (7581.01 BogoMIPS).
[    0.548360] CPU0 attaching sched-domain:
[    0.548363]  domain 0: span 0-1 level CPU
[    0.548366]   groups: 0 1
[    0.548370]   domain 1: span 0-1 level NODE
[    0.548372]    groups: 0-1
[    0.548377] CPU1 attaching sched-domain:
[    0.548379]  domain 0: span 0-1 level CPU
[    0.548381]   groups: 1 0
[    0.548384]   domain 1: span 0-1 level NODE
[    0.548386]    groups: 0-1
[    0.548493] Switch to broadcast mode on CPU0
[    0.548493] net_namespace: 1552 bytes
[    0.548493] Booting paravirtualized kernel on bare hardware
[    0.548493] Time: 23:13:12  Date: 04/20/09
[    0.548493] NET: Registered protocol family 16
[    0.548493] node 0 link 0: io port [1000, fffff]
[    0.548493] TOM: 00000000e0000000 aka 3584M
[    0.548493] node 0 link 0: mmio [f8300000, ffffffff]
[    0.548493] node 0 link 0: mmio [f8200000, f82fffff]
[    0.548493] node 0 link 0: mmio [f8000000, f81fffff]
[    0.548493] node 0 link 0: mmio [f0000000, f7ffffff]
[    0.548493] node 0 link 0: mmio [a0000, bffff]
[    0.548493] node 0 link 0: mmio [f0000000, efffffff]
[    0.548493] node 0 link 0: mmio [e0000000, efffffff]
[    0.548493] node 0 link 0: mmio [e0000000, dfffffff]
[    0.548493] TOM2: 0000000120000000 aka 4608M
[    0.548493] bus: [00,ff] on node 0 link 0
[    0.548493] bus: 00 index 0 io port: [0, ffff]
[    0.548493] bus: 00 index 1 mmio: [e0000000, ffffffff]
[    0.548493] bus: 00 index 2 mmio: [a0000, bffff]
[    0.548493] bus: 00 index 3 mmio: [120000000, fcffffffff]
[    0.548493] ACPI: bus type pci registered
[    0.548493] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 29
[    0.548493] PCI: MCFG area at e0000000 reserved in E820
[    0.549734] PCI: Using MMCONFIG at e0000000 - e1dfffff
[    0.549736] PCI: Using configuration type 1 for base access
[    0.553392] ACPI: EC: Look up EC in DSDT
[    0.556579] ACPI Error (evregion-0315): No handler for Region [ERAM] (ffff88011fa37d80) [EmbeddedControl] [20080609]
[    0.556586] ACPI Error (exfldio-0291): Region EmbeddedControl(3) has no handler [20080609]
[    0.556592] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.HTEV] (Node ffff88011fa355c0), AE_NOT_EXIST
[    0.556638] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LPC0.EC0_._REG] (Node ffff88011fa3d960), AE_NOT_EXIST
[    0.559370] ACPI: BIOS _OSI(Linux) query ignored via DMI
[    0.560695] ACPI: Interpreter enabled
[    0.560698] ACPI: (supports S0 S3 S4 S5)
[    0.560716] ACPI: Using IOAPIC for interrupt routing
[    0.564063] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.640577] ACPI: EC: GPE = 0x13, I/O: command/status = 0x66, data = 0x62
[    0.640577] ACPI: EC: driver started in interrupt mode
[    0.640577] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.640577] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.640577] pci 0000:00:05.0: PME# disabled
[    0.640577] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.640577] pci 0000:00:06.0: PME# disabled
[    0.640577] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.640577] pci 0000:00:07.0: PME# disabled
[    0.640577] PCI: 0000:00:12.0 reg 10 io port: [8440, 8447]
[    0.640577] PCI: 0000:00:12.0 reg 14 io port: [8434, 8437]
[    0.640577] PCI: 0000:00:12.0 reg 18 io port: [8438, 843f]
[    0.640577] PCI: 0000:00:12.0 reg 1c io port: [8430, 8433]
[    0.640577] PCI: 0000:00:12.0 reg 20 io port: [8400, 840f]
[    0.640577] PCI: 0000:00:12.0 reg 24 32bit mmio: [f8909000, f89093ff]
[    0.640577] pci 0000:00:12.0: set SATA to AHCI mode
[    0.640577] PCI: 0000:00:13.0 reg 10 32bit mmio: [f8904000, f8904fff]
[    0.640577] PCI: 0000:00:13.1 reg 10 32bit mmio: [f8905000, f8905fff]
[    0.640577] PCI: 0000:00:13.2 reg 10 32bit mmio: [f8906000, f8906fff]
[    0.640577] PCI: 0000:00:13.3 reg 10 32bit mmio: [f8907000, f8907fff]
[    0.640577] PCI: 0000:00:13.4 reg 10 32bit mmio: [f8908000, f8908fff]
[    0.640654] PCI: 0000:00:13.5 reg 10 32bit mmio: [f8909400, f89094ff]
[    0.640717] pci 0000:00:13.5: supports D1
[    0.640719] pci 0000:00:13.5: supports D2
[    0.640721] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[    0.640725] pci 0000:00:13.5: PME# disabled
[    0.640757] PCI: 0000:00:14.0 reg 10 io port: [8410, 841f]
[    0.640828] PCI: 0000:00:14.1 reg 10 io port: [1f0, 1f7]
[    0.640835] PCI: 0000:00:14.1 reg 14 io port: [3f4, 3f7]
[    0.640842] PCI: 0000:00:14.1 reg 18 io port: [0, 7]
[    0.640849] PCI: 0000:00:14.1 reg 1c io port: [0, 3]
[    0.640857] PCI: 0000:00:14.1 reg 20 io port: [8420, 842f]
[    0.640912] PCI: 0000:00:14.2 reg 10 64bit mmio: [f8900000, f8903fff]
[    0.640964] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.640968] pci 0000:00:14.2: PME# disabled
[    0.641158] PCI: 0000:01:05.0 reg 10 64bit mmio: [f0000000, f7ffffff]
[    0.641164] PCI: 0000:01:05.0 reg 18 64bit mmio: [f8300000, f830ffff]
[    0.641168] PCI: 0000:01:05.0 reg 20 io port: [9000, 90ff]
[    0.641172] PCI: 0000:01:05.0 reg 24 32bit mmio: [f8200000, f82fffff]
[    0.641186] pci 0000:01:05.0: supports D1
[    0.641188] pci 0000:01:05.0: supports D2
[    0.641203] PCI: bridge 0000:00:01.0 io port: [9000, 9fff]
[    0.641206] PCI: bridge 0000:00:01.0 32bit mmio: [f8200000, f83fffff]
[    0.641210] PCI: bridge 0000:00:01.0 64bit mmio pref: [f0000000, f7ffffff]
[    0.641262] PCI: 0000:0b:00.0 reg 10 64bit mmio: [f8000000, f81fffff]
[    0.641366] pci 0000:0b:00.0: supports D1
[    0.641367] pci 0000:0b:00.0: supports D2
[    0.641369] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot
[    0.641375] pci 0000:0b:00.0: PME# disabled
[    0.641422] PCI: bridge 0000:00:05.0 32bit mmio: [f8000000, f81fffff]
[    0.641470] PCI: 0000:11:00.0 reg 10 io port: [a000, a0ff]
[    0.641488] PCI: 0000:11:00.0 reg 18 64bit mmio: [f8500000, f8500fff]
[    0.641506] PCI: 0000:11:00.0 reg 30 32bit mmio: [0, 1ffff]
[    0.641552] pci 0000:11:00.0: supports D1
[    0.641554] pci 0000:11:00.0: supports D2
[    0.641556] pci 0000:11:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.641561] pci 0000:11:00.0: PME# disabled
[    0.641607] PCI: bridge 0000:00:06.0 io port: [a000, afff]
[    0.641610] PCI: bridge 0000:00:06.0 32bit mmio: [f8500000, f85fffff]
[    0.641652] PCI: 0000:17:00.0 reg 10 64bit mmio: [f8400000, f840ffff]
[    0.641762] PCI: bridge 0000:00:07.0 32bit mmio: [f8400000, f84fffff]
[    0.641816] PCI: 0000:1d:04.0 reg 10 32bit mmio: [f8604000, f8604fff]
[    0.641850] pci 0000:1d:04.0: supports D1
[    0.641851] pci 0000:1d:04.0: supports D2
[    0.641853] pci 0000:1d:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.641859] pci 0000:1d:04.0: PME# disabled
[    0.641899] PCI: 0000:1d:04.1 reg 10 32bit mmio: [f8606000, f86067ff]
[    0.641908] PCI: 0000:1d:04.1 reg 14 32bit mmio: [f8600000, f8603fff]
[    0.641977] pci 0000:1d:04.1: supports D1
[    0.641978] pci 0000:1d:04.1: supports D2
[    0.641980] pci 0000:1d:04.1: PME# supported from D0 D1 D2 D3hot
[    0.641986] pci 0000:1d:04.1: PME# disabled
[    0.642025] PCI: 0000:1d:04.2 reg 10 32bit mmio: [f8605000, f8605fff]
[    0.642097] pci 0000:1d:04.2: supports D1
[    0.642099] pci 0000:1d:04.2: supports D2
[    0.642100] pci 0000:1d:04.2: PME# supported from D0 D1 D2 D3hot
[    0.642106] pci 0000:1d:04.2: PME# disabled
[    0.642145] PCI: 0000:1d:04.3 reg 10 32bit mmio: [f8606800, f86068ff]
[    0.642217] pci 0000:1d:04.3: supports D1
[    0.642219] pci 0000:1d:04.3: supports D2
[    0.642221] pci 0000:1d:04.3: PME# supported from D0 D1 D2 D3hot
[    0.642226] pci 0000:1d:04.3: PME# disabled
[    0.642279] pci 0000:00:14.4: transparent bridge
[    0.642286] PCI: bridge 0000:00:14.4 32bit mmio: [f8600000, f86fffff]
[    0.642332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.642628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[    0.642628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[    0.642628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[    0.642628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT]
[    0.642628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.642628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.652202] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[    0.652389] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[    0.652573] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[    0.652756] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[    0.652938] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[    0.653120] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[    0.653302] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[    0.653486] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[    0.653581] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.653581] pnp: PnP ACPI init
[    0.653581] ACPI: bus type pnp registered
[    0.684249] pnp: PnP ACPI: found 11 devices
[    0.684252] ACPI: ACPI bus type pnp unregistered
[    0.688068] PCI: Using ACPI for IRQ routing
[    0.696042] NET: Registered protocol family 8
[    0.696045] NET: Registered protocol family 20
[    0.700041] NetLabel: Initializing
[    0.700041] NetLabel:  domain hash size = 128
[    0.700041] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.700058] NetLabel:  unlabeled traffic allowed by default
[    0.700191] PCI-DMA: Disabling AGP.
[    0.700343] PCI-DMA: aperture base @ 20000000 size 65536 KB
[    0.700343] PCI-DMA: using GART IOMMU.
[    0.700343] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.700714] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.700721] hpet0: 4 32-bit timers, 14318180 Hz
[    0.703074] tracer: 1286 pages allocated for 65536 entries of 80 bytes
[    0.703077]    actual entries 65586
[    0.703208] AppArmor: AppArmor Filesystem Enabled
[    0.703239] ACPI: RTC can wake from S4
[    0.704052] Switched to high resolution mode on CPU 0
[    0.704066] Switched to high resolution mode on CPU 1
[    0.713056] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.713059] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.713073] system 00:08: ioport range 0x1080-0x1080 has been reserved
[    0.713076] system 00:08: ioport range 0x220-0x22f has been reserved
[    0.713079] system 00:08: ioport range 0x40b-0x40b has been reserved
[    0.713082] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.713085] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[    0.713088] system 00:08: ioport range 0x530-0x537 has been reserved
[    0.713091] system 00:08: ioport range 0xc00-0xc01 has been reserved
[    0.713094] system 00:08: ioport range 0xc14-0xc14 has been reserved
[    0.713097] system 00:08: ioport range 0xc50-0xc52 has been reserved
[    0.713100] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[    0.713103] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[    0.713106] system 00:08: ioport range 0xcd0-0xcd1 has been reserved
[    0.713109] system 00:08: ioport range 0xcd2-0xcd3 has been reserved
[    0.713112] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[    0.713116] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[    0.713119] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[    0.713122] system 00:08: ioport range 0x8000-0x805f has been reserved
[    0.713125] system 00:08: ioport range 0xf40-0xf47 has been reserved
[    0.713128] system 00:08: ioport range 0x87f-0x87f has been reserved
[    0.713131] system 00:08: ioport range 0xfd60-0xfddf has been reserved
[    0.713139] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[    0.713143] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[    0.718583] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.718586] pci 0000:00:01.0:   IO window: 0x9000-0x9fff
[    0.718590] pci 0000:00:01.0:   MEM window: 0xf8200000-0xf83fffff
[    0.718594] pci 0000:00:01.0:   PREFETCH window: 0x000000f0000000-0x000000f7ffffff
[    0.718599] pci 0000:00:05.0: PCI bridge, secondary bus 0000:0b
[    0.718601] pci 0000:00:05.0:   IO window: disabled
[    0.718604] pci 0000:00:05.0:   MEM window: 0xf8000000-0xf81fffff
[    0.718607] pci 0000:00:05.0:   PREFETCH window: disabled
[    0.718612] pci 0000:00:06.0: PCI bridge, secondary bus 0000:11
[    0.718615] pci 0000:00:06.0:   IO window: 0xa000-0xafff
[    0.718619] pci 0000:00:06.0:   MEM window: 0xf8500000-0xf85fffff
[    0.718622] pci 0000:00:06.0:   PREFETCH window: 0x000000f8700000-0x000000f87fffff
[    0.718627] pci 0000:00:07.0: PCI bridge, secondary bus 0000:17
[    0.718629] pci 0000:00:07.0:   IO window: disabled
[    0.718632] pci 0000:00:07.0:   MEM window: 0xf8400000-0xf84fffff
[    0.718635] pci 0000:00:07.0:   PREFETCH window: disabled
[    0.718642] pci 0000:1d:04.0: CardBus bridge, secondary bus 0000:1e
[    0.718645] pci 0000:1d:04.0:   IO window: 0x002000-0x0020ff
[    0.718653] pci 0000:1d:04.0:   IO window: 0x002400-0x0024ff
[    0.718659] pci 0000:1d:04.0:   PREFETCH window: 0x120000000-0x123ffffff
[    0.718665] pci 0000:1d:04.0:   MEM window: 0x124000000-0x127ffffff
[    0.718670] pci 0000:00:14.4: PCI bridge, secondary bus 0000:1d
[    0.718674] pci 0000:00:14.4:   IO window: 0x2000-0x2fff
[    0.718680] pci 0000:00:14.4:   MEM window: 0xf8600000-0xf86fffff
[    0.718685] pci 0000:00:14.4:   PREFETCH window: 0x00000120000000-0x00000123ffffff
[    0.718704] pci 0000:00:05.0: setting latency timer to 64
[    0.718710] pci 0000:00:06.0: setting latency timer to 64
[    0.718716] pci 0000:00:07.0: setting latency timer to 64
[    0.718738] pci 0000:1d:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.718745] bus: 00 index 0 io port: [0, ffff]
[    0.718747] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[    0.718749] bus: 01 index 0 io port: [9000, 9fff]
[    0.718752] bus: 01 index 1 mmio: [f8200000, f83fffff]
[    0.718754] bus: 01 index 2 mmio: [f0000000, f7ffffff]
[    0.718757] bus: 01 index 3 mmio: [0, 0]
[    0.718759] bus: 0b index 0 mmio: [0, 0]
[    0.718761] bus: 0b index 1 mmio: [f8000000, f81fffff]
[    0.718763] bus: 0b index 2 mmio: [0, 0]
[    0.718765] bus: 0b index 3 mmio: [0, 0]
[    0.718767] bus: 11 index 0 io port: [a000, afff]
[    0.718769] bus: 11 index 1 mmio: [f8500000, f85fffff]
[    0.718772] bus: 11 index 2 mmio: [f8700000, f87fffff]
[    0.718774] bus: 11 index 3 mmio: [0, 0]
[    0.718776] bus: 17 index 0 mmio: [0, 0]
[    0.718778] bus: 17 index 1 mmio: [f8400000, f84fffff]
[    0.718780] bus: 17 index 2 mmio: [0, 0]
[    0.718782] bus: 17 index 3 mmio: [0, 0]
[    0.718784] bus: 1d index 0 io port: [2000, 2fff]
[    0.718787] bus: 1d index 1 mmio: [f8600000, f86fffff]
[    0.718789] bus: 1d index 2 mmio: [120000000, 123ffffff]
[    0.718791] bus: 1d index 3 io port: [0, ffff]
[    0.718793] bus: 1d index 4 mmio: [0, ffffffffffffffff]
[    0.718796] bus: 1e index 0 io port: [2000, 20ff]
[    0.718798] bus: 1e index 1 io port: [2400, 24ff]
[    0.718800] bus: 1e index 2 mmio: [120000000, 123ffffff]
[    0.718803] bus: 1e index 3 mmio: [124000000, 127ffffff]
[    0.718818] NET: Registered protocol family 2
[    0.757198] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.758805] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.763575] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.764196] TCP: Hash tables configured (established 524288 bind 65536)
[    0.764199] TCP reno registered
[    0.773130] NET: Registered protocol family 1
[    0.773268] checking if image is initramfs... it is
[    1.543436] Freeing initrd memory: 8483k freed
[    1.550304] audit: initializing netlink socket (disabled)
[    1.550319] type=2000 audit(1240269191.548:1): initialized
[    1.556745] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.560636] VFS: Disk quotas dquot_6.5.1
[    1.560764] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.560912] msgmni has been set to 7665
[    1.561078] io scheduler noop registered
[    1.561081] io scheduler anticipatory registered
[    1.561083] io scheduler deadline registered
[    1.561275] io scheduler cfq registered (default)
[    1.561386] pci 0000:01:05.0: Boot video device
[    1.561555] pcieport-driver 0000:00:05.0: setting latency timer to 64
[    1.561576] pcieport-driver 0000:00:05.0: found MSI capability
[    1.561601] pci_express 0000:00:05.0:pcie00: allocate port service
[    1.561682] pci_express 0000:00:05.0:pcie02: allocate port service
[    1.561751] pci_express 0000:00:05.0:pcie03: allocate port service
[    1.561856] pcieport-driver 0000:00:06.0: setting latency timer to 64
[    1.561877] pcieport-driver 0000:00:06.0: found MSI capability
[    1.561897] pci_express 0000:00:06.0:pcie00: allocate port service
[    1.561969] pci_express 0000:00:06.0:pcie03: allocate port service
[    1.562074] pcieport-driver 0000:00:07.0: setting latency timer to 64
[    1.562094] pcieport-driver 0000:00:07.0: found MSI capability
[    1.562114] pci_express 0000:00:07.0:pcie00: allocate port service
[    1.562186] pci_express 0000:00:07.0:pcie03: allocate port service
[    1.618691] hpet_resources: 0xfed00000 is busy
[    1.618808] Linux agpgart interface v0.103
[    1.618813] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.622529] brd: module loaded
[    1.622638] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    1.622833] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.658528] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.658538] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.673194] mice: PS/2 mouse device common for all mice
[    1.673378] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.673406] rtc0: alarms up to one month, hpet irqs
[    1.673465] cpuidle: using governor ladder
[    1.673468] cpuidle: using governor menu
[    1.673888] TCP cubic registered
[    1.674198] registered taskstats version 1
[    1.674371]   Magic number: 5:100:252
[    1.674403] tty ttyw8: hash matches
[    1.674411] tty ttytb: hash matches
[    1.674537] rtc_cmos 00:04: setting system clock to 2009-04-20 23:13:13 UTC (1240269193)
[    1.674541] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.674543] EDD information not available.
[    1.674597] Freeing unused kernel memory: 540k freed
[    1.674875] Write protecting the kernel read-only data: 4356k
[    1.696081] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    1.892212] fuse init (API version 7.9)
[    2.008019] ACPI: processor limited to max C-state 1
[    2.008125] processor ACPI0007:00: registered as cooling_device0
[    2.008131] ACPI: Processor [CPU0] (supports 8 throttling states)
[    2.008241] processor ACPI0007:01: registered as cooling_device1
[    2.395488] usbcore: registered new interface driver usbfs
[    2.395519] usbcore: registered new interface driver hub
[    2.404241] usbcore: registered new device driver usb
[    2.404418] No dock devices found.
[    2.407277] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    2.407294] ehci_hcd 0000:00:13.5: EHCI Host Controller
[    2.407353] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[    2.407397] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[    2.407417] ehci_hcd 0000:00:13.5: debug port 1
[    2.407440] ehci_hcd 0000:00:13.5: irq 19, io mem 0xf8909400
[    2.416034] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    2.416210] usb usb1: configuration #1 chosen from 1 choice
[    2.416239] hub 1-0:1.0: USB hub found
[    2.416250] hub 1-0:1.0: 10 ports detected
[    2.425638] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.443426] SCSI subsystem initialized
[    2.491863] libata version 3.00 loaded.
[    2.520389] ahci 0000:00:12.0: version 3.0
[    2.520416] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    2.520447] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[    2.520545] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    2.520549] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part 
[    2.520929] scsi0 : ahci
[    2.521070] scsi1 : ahci
[    2.521138] scsi2 : ahci
[    2.521211] scsi3 : ahci
[    2.521353] ata1: SATA max UDMA/133 abar m1024@0xf8909000 port 0xf8909100 irq 22
[    2.521357] ata2: SATA max UDMA/133 abar m1024@0xf8909000 port 0xf8909180 irq 22
[    2.521361] ata3: SATA max UDMA/133 abar m1024@0xf8909000 port 0xf8909200 irq 22
[    2.521365] ata4: SATA max UDMA/133 abar m1024@0xf8909000 port 0xf8909280 irq 22
[    3.228042] ata1: softreset failed (device not ready)
[    3.228049] ata1: failed due to HW bug, retry pmp=0
[    3.392051] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.763590] ata1.00: ATA-8: TOSHIBA MK1646GSX, LB113M, max UDMA/100
[    3.763595] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    3.763606] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[    3.764443] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[    3.764447] ata1.00: configured for UDMA/100
[    4.100055] ata2: SATA link down (SStatus 0 SControl 300)
[    4.436051] ata3: SATA link down (SStatus 0 SControl 300)
[    4.772050] ata4: SATA link down (SStatus 0 SControl 300)
[    4.788152] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK1646GS LB11 PQ: 0 ANSI: 5
[    4.788298] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.788317] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    4.788351] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[    4.788391] ohci_hcd 0000:00:13.0: irq 16, io mem 0xf8904000
[    4.844205] usb usb2: configuration #1 chosen from 1 choice
[    4.844235] hub 2-0:1.0: USB hub found
[    4.844251] hub 2-0:1.0: 2 ports detected
[    4.948311] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    4.948329] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    4.948361] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[    4.948391] ohci_hcd 0000:00:13.1: irq 17, io mem 0xf8905000
[    5.004212] usb usb3: configuration #1 chosen from 1 choice
[    5.004245] hub 3-0:1.0: USB hub found
[    5.004262] hub 3-0:1.0: 2 ports detected
[    5.108292] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    5.108311] ohci_hcd 0000:00:13.2: OHCI Host Controller
[    5.108343] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[    5.108372] ohci_hcd 0000:00:13.2: irq 18, io mem 0xf8906000
[    5.164176] usb usb4: configuration #1 chosen from 1 choice
[    5.164212] hub 4-0:1.0: USB hub found
[    5.164228] hub 4-0:1.0: 2 ports detected
[    5.271461] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    5.271483] ohci_hcd 0000:00:13.3: OHCI Host Controller
[    5.271533] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[    5.271558] ohci_hcd 0000:00:13.3: irq 17, io mem 0xf8907000
[    5.324218] usb usb5: configuration #1 chosen from 1 choice
[    5.324258] hub 5-0:1.0: USB hub found
[    5.324275] hub 5-0:1.0: 2 ports detected
[    5.428259] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    5.428276] ohci_hcd 0000:00:13.4: OHCI Host Controller
[    5.428306] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[    5.428326] ohci_hcd 0000:00:13.4: irq 18, io mem 0xf8908000
[    5.484185] usb usb6: configuration #1 chosen from 1 choice
[    5.484222] hub 6-0:1.0: USB hub found
[    5.484239] hub 6-0:1.0: 2 ports detected
[    5.589673] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    5.589693] r8169 0000:11:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    5.589713] r8169 0000:11:00.0: setting latency timer to 64
[    5.590095] eth0: RTL8101e at 0xffffc20000652000, 00:1e:ec:00:9e:6a, XID 34200000 IRQ 2300
[    5.594240] ohci1394 0000:1d:04.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    5.644045] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[f8606000-f86067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    5.644538] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    5.650273] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.650326] pata_acpi 0000:00:14.1: setting latency timer to 64
[    5.653700] scsi4 : pata_atiixp
[    5.653802] scsi5 : pata_atiixp
[    5.654956] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[    5.654959] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[    5.680414] Driver 'sd' needs updating - please use bus_type methods
[    5.680561] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    5.680579] sd 0:0:0:0: [sda] Write Protect is off
[    5.680583] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.680611] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.680696] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    5.680711] sd 0:0:0:0: [sda] Write Protect is off
[    5.680714] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.680741] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.680745]  sda: sda1 sda2 sda3 sda4 <ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WT03, max UDMA/33
[    5.829860]  sda5ata5.00: configured for UDMA/33
[    5.844764]  sda6>
[    5.845051] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.991247] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WT03 PQ: 0 ANSI: 5
[    5.991441] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[    6.012734] Driver 'sr' needs updating - please use bus_type methods
[    6.016750] sr0: scsi3-mmc drive: 31x/31x writer dvd-ram cd/rw xa/form2 cdda tray
[    6.016756] Uniform CD-ROM driver Revision: 3.20
[    6.016894] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    6.401580] PM: Starting manual resume from disk
[    6.401585] PM: Resume from partition 8:5
[    6.401587] PM: Checking hibernation image.
[    6.401744] PM: Resume from disk failed.
[    6.421888] EXT3-fs: INFO: recovery required on readonly filesystem.
[    6.421892] EXT3-fs: write access will be enabled during recovery.
[    6.921354] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f81c2404ccc]
[    8.577603] kjournald starting.  Commit interval 5 seconds
[    8.577637] EXT3-fs: sda3: orphan cleanup on readonly fs
[    8.577647] ext3_orphan_cleanup: deleting unreferenced inode 444179
[    8.577687] ext3_orphan_cleanup: deleting unreferenced inode 439784
[    8.577698] ext3_orphan_cleanup: deleting unreferenced inode 439783
[    8.577707] ext3_orphan_cleanup: deleting unreferenced inode 439782
[    8.577717] ext3_orphan_cleanup: deleting unreferenced inode 439781
[    8.577739] ext3_orphan_cleanup: deleting unreferenced inode 439780
[    8.577747] EXT3-fs: sda3: 6 orphan inodes deleted
[    8.577749] EXT3-fs: recovery complete.
[    8.580585] EXT3-fs: mounted filesystem with ordered data mode.
[   14.681501] udevd version 124 started
[   14.986120] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   14.989378] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.033399] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   15.065040] ACPI: Power Button (FF) [PWRF]
[   15.065192] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[   15.065299] ACPI: Lid Switch [LID]
[   15.065377] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[   15.097034] ACPI: Power Button (CM) [PWRB]
[   15.275966] ACPI: AC Adapter [ACAD] (off-line)
[   15.387726] acpi device:29: registered as cooling_device2
[   15.388040] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:26/device:27/input/input5
[   15.405058] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[   15.702114] ACPI: Battery Slot [BAT1] (battery present)
[   15.845326] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
[   16.360880] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   16.472872] ndiswrapper (link_pe_images:575): fixing KI_USER_SHARED_DATA address in the driver
[   16.475401] ndiswrapper: driver net5211 (,06/21/2007,5.3.0.56) loaded
[   16.475911] ndiswrapper 0000:17:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   16.475972] ndiswrapper (ZwClose:2198): closing handle 0x0 not implemented
[   16.476216] ndiswrapper 0000:17:00.0: setting latency timer to 64
[   16.889164] ndiswrapper: using IRQ 19
[   17.076016] sdhci: Secure Digital Host Controller Interface driver
[   17.076020] sdhci: Copyright(c) Pierre Ossman
[   17.092683] wlan0: ethernet device 00:1b:9e:95:c8:cd using serialized NDIS driver: net5211, version: 0x50003, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 168C:001C.5.conf
[   17.097167] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[   17.099640] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
[   17.107736] tifm_7xx1 0000:1d:04.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[   17.107904] usbcore: registered new interface driver ndiswrapper
[   17.110786] sdhci-pci 0000:1d:04.3: SDHCI controller found [104c:803c] (rev 0)
[   17.110808] sdhci-pci 0000:1d:04.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[   17.110946] mmc0: SDHCI controller on PCI [0000:1d:04.3] using DMA
[   17.271489] Linux video capture interface: v2.00
[   17.311607] Yenta: CardBus bridge found at 0000:1d:04.0 [1179:ff00]
[   17.311634] Yenta: Enabling burst memory read transactions
[   17.311640] Yenta: Using CSCINT to route CSC interrupts to PCI
[   17.311642] Yenta: Routing CardBus interrupts to PCI
[   17.311648] Yenta TI: socket 0000:1d:04.0, mfunc 0x10a01b22, devctl 0x64
[   17.358239] cx23885 driver version 0.0.1 loaded
[   17.542187] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
[   17.542196] Socket status: 30000006
[   17.542199] Yenta: Raising subordinate bus# of parent bus (#1d) from #1e to #21
[   17.542205] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[   17.542232] pcmcia: parent PCI bridge Memory window: 0xf8600000 - 0xf86fffff
[   17.542235] pcmcia: parent PCI bridge Memory window: 0x120000000 - 0x123ffffff
[   17.542719] cx23885 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   17.542853] CORE cx23885[0]: subsystem: 0070:7717, board: Hauppauge WinTV-HVR1500 [card=6,autodetected]
[   17.661614] cx23885[0]: i2c bus 0 registered
[   17.661660] cx23885[0]: i2c bus 1 registered
[   17.661694] cx23885[0]: i2c bus 2 registered
[   17.689053] tveeprom 1-0050: Hauppauge model 77001, rev D4C0, serial# 2396878
[   17.689057] tveeprom 1-0050: MAC address is 00-0D-FE-24-92-CE
[   17.689060] tveeprom 1-0050: tuner model is Xceive XC3028 (idx 120, type 71)
[   17.689063] tveeprom 1-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
[   17.689066] tveeprom 1-0050: audio processor is CX23885 (idx 39)
[   17.689068] tveeprom 1-0050: decoder processor is CX23885 (idx 33)
[   17.689071] tveeprom 1-0050: has no radio
[   17.689073] cx23885[0]: hauppauge eeprom: model=77001
[   17.689076] cx23885[0]: cx23885 based dvb card
[   17.918553] xc2028 2-0061: creating new instance
[   17.918558] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
[   17.918565] DVB: registering new adapter (cx23885[0])
[   17.918569] DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
[   17.919872] cx23885_dev_checkrevision() Hardware revision = 0xb0
[   17.919882] cx23885[0]/0: found at 0000:0b:00.0, rev: 2, irq: 17, latency: 0, mmio: 0xf8000000
[   17.919894] cx23885 0000:0b:00.0: setting latency timer to 64
[   17.919963] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   17.956401] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[   18.075253] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000
[   18.166061] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   19.730909] lp: driver loaded but no devices found
[   19.933960] Adding 578300k swap on /dev/sda5.  Priority:-1 extents:1 across:578300k
[   19.940008] APIC error on CPU1: 00(40)
[   19.940022] APIC error on CPU0: 00(40)
[   19.977189] EXT3 FS on sda3, internal journal
[   20.397865] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[   20.406405] SGI XFS Quota Management subsystem
[   20.461046] XFS mounting filesystem sda6
[   20.649173] Starting XFS recovery on filesystem: sda6 (logdev: internal)
[   20.780024] Ending XFS recovery on filesystem: sda6 (logdev: internal)
[   21.226414] type=1505 audit(1240287212.748:2): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4294
[   21.226657] type=1505 audit(1240287212.748:3): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4294
[   21.274081] type=1505 audit(1240287212.796:4): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4298
[   21.448332] ip_tables: (C) 2000-2006 Netfilter Core Team
[   22.259563] ACPI: WMI: Mapper loaded
[   23.270250] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   23.643403] NET: Registered protocol family 10
[   23.643940] lo: Disabled Privacy Extensions
[   25.427602] ppdev: user-space parallel port driver
[   34.220319] Bluetooth: Core ver 2.13
[   34.222054] NET: Registered protocol family 31
[   34.222060] Bluetooth: HCI device and connection manager initialized
[   34.222065] Bluetooth: HCI socket layer initialized
[   34.234743] Bluetooth: L2CAP ver 2.11
[   34.234751] Bluetooth: L2CAP socket layer initialized
[   34.246425] Bluetooth: SCO (Voice Link) ver 0.6
[   34.246431] Bluetooth: SCO socket layer initialized
[   34.258551] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   34.258561] Bluetooth: BNEP filters: protocol multicast
[   34.277070] Bridge firewalling registered
[   34.646589] Bluetooth: RFCOMM socket layer initialized
[   34.646615] Bluetooth: RFCOMM TTY layer initialized
[   34.646618] Bluetooth: RFCOMM ver 1.10
[   36.472560] pci 0000:01:05.0: power state changed by ACPI to D0
[   36.472584] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   36.645723] [drm] Initialized drm 1.1.0 20060810
[   36.666189] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[   37.221713] [drm] Setting GART location based on new memory map
[   37.222190] [drm] Loading RS690 Microcode
[   37.222211] [drm] Num pipes: 1
[   37.222219] [drm] writeback test succeeded in 1 usecs
[   37.388570] lirc_dev: IR Remote Control driver registered, major 61 
[   37.406598] usbcore: registered new interface driver lirc_mceusb
[   37.408244] lirc_mceusb: USB Microsoft IR Transceiver Driver v0.2
[   38.785694] r8169: eth0: link down
[   38.786692] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   38.788877] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   38.818846] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   38.929073] NET: Registered protocol family 17
[   48.925025] wlan0: no IPv6 routers present
[   49.097755] CPU0 attaching NULL sched-domain.
[   49.097773] CPU1 attaching NULL sched-domain.
[   49.113093] CPU0 attaching sched-domain:
[   49.113100]  domain 0: span 0-1 level MC
[   49.113103]   groups: 0 1
[   49.113109]   domain 1: span 0-1 level CPU
[   49.113111]    groups: 0-1
[   49.113114]    domain 2: span 0-1 level NODE
[   49.113116]     groups: 0-1
[   49.113121] CPU1 attaching sched-domain:
[   49.113123]  domain 0: span 0-1 level MC
[   49.113125]   groups: 1 0
[   49.113129]   domain 1: span 0-1 level CPU
[   49.113131]    groups: 0-1
[   49.113133]    domain 2: span 0-1 level NODE
[   49.113135]     groups: 0-1
[   49.192612] CPU0 attaching NULL sched-domain.
[   49.192629] CPU1 attaching NULL sched-domain.
[   49.242778] CPU0 attaching sched-domain:
[   49.242788]  domain 0: span 0-1 level MC
[   49.242792]   groups: 0 1
[   49.242798]   domain 1: span 0-1 level CPU
[   49.242800]    groups: 0-1
[   49.242803]    domain 2: span 0-1 level NODE
[   49.242806]     groups: 0-1
[   49.242815] CPU1 attaching sched-domain:
[   49.242817]  domain 0: span 0-1 level MC
[   49.242819]   groups: 1 0
[   49.242824]   domain 1: span 0-1 level CPU
[   49.242826]    groups: 0-1
[   49.242829]    domain 2: span 0-1 level NODE
[   49.242831]     groups: 0-1
[   78.503582] [drm] Num pipes: 1
[   80.433006] [drm] Setting GART location based on new memory map
[   80.433944] [drm] Loading RS690 Microcode
[   80.433973] [drm] Num pipes: 1
[   80.433980] [drm] writeback test succeeded in 1 usecs
[   83.257418] hda-intel: Invalid position buffer, using LPIB read method instead.
[   93.991835] CPU0 attaching NULL sched-domain.
[   93.991850] CPU1 attaching NULL sched-domain.
[   94.012146] CPU0 attaching sched-domain:
[   94.012155]  domain 0: span 0-1 level MC
[   94.012158]   groups: 0 1
[   94.012163]   domain 1: span 0-1 level CPU
[   94.012166]    groups: 0-1
[   94.012168]    domain 2: span 0-1 level NODE
[   94.012172]     groups: 0-1
[   94.012179] CPU1 attaching sched-domain:
[   94.012181]  domain 0: span 0-1 level MC
[   94.012183]   groups: 1 0
[   94.012186]   domain 1: span 0-1 level CPU
[   94.012188]    groups: 0-1
[   94.012191]    domain 2: span 0-1 level NODE
[   94.012193]     groups: 0-1
[   94.297067] CPU0 attaching NULL sched-domain.
[   94.297088] CPU1 attaching NULL sched-domain.
[   94.324122] CPU0 attaching sched-domain:
[   94.324132]  domain 0: span 0-1 level MC
[   94.324136]   groups: 0 1
[   94.324140]   domain 1: span 0-1 level CPU
[   94.324144]    groups: 0-1
[   94.324147]    domain 2: span 0-1 level NODE
[   94.324149]     groups: 0-1
[   94.324156] CPU1 attaching sched-domain:
[   94.324158]  domain 0: span 0-1 level MC
[   94.324160]   groups: 1 0
[   94.324163]   domain 1: span 0-1 level CPU
[   94.324165]    groups: 0-1
[   94.324168]    domain 2: span 0-1 level NODE
[   94.324170]     groups: 0-1
[  142.948484] firmware: requesting xc3028-v27.fw
[  143.023849] xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[  143.044033] xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[  144.026078] xc2028 2-0061: Loading firmware for type=D2633 DTV6 ATSC (10030), id 0000000000000000.
[  379.604161] DVB: frontend 0 frequency 863000000 out of range (54000000..858000000)
[  379.604994] DVB: frontend 0 frequency 869000000 out of range (54000000..858000000)
[  379.606274] DVB: frontend 0 frequency 875000000 out of range (54000000..858000000)
[  379.607641] DVB: frontend 0 frequency 881000000 out of range (54000000..858000000)
[  379.609031] DVB: frontend 0 frequency 887000000 out of range (54000000..858000000)
[  496.916014] APIC error on CPU1: 40(40)
[  496.916019] APIC error on CPU0: 40(40)
[  523.836015] APIC error on CPU0: 40(40)
[  523.836023] APIC error on CPU1: 40(40)
[  552.809543] CPU0 attaching NULL sched-domain.
[  552.809564] CPU1 attaching NULL sched-domain.
[  552.841088] CPU0 attaching sched-domain:
[  552.841095]  domain 0: span 0-1 level CPU
[  552.841097]   groups: 0 1
[  552.841102]   domain 1: span 0-1 level NODE
[  552.841105]    groups: 0-1
[  552.841110] CPU1 attaching sched-domain:
[  552.841112]  domain 0: span 0-1 level CPU
[  552.841114]   groups: 1 0
[  552.841117]   domain 1: span 0-1 level NODE
[  552.841120]    groups: 0-1




----------------------------------------
> Date: Mon, 20 Apr 2009 21:51:27 -0400
> From: stoth@linuxtv.org
> Subject: Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)
> To: pghben@yahoo.com
> CC: linux-media@vger.kernel.org; mchehab@infradead.org
>
>>
>> If there is anything I can do that will help you find the bug, please
>> let me know..
>
> The issue is fixed.
>
> http://linuxtv.org/hg/~stoth/cx23885-hvr1500/rev/7853c00870e1
>
> It's locking OK for me now. If you can clone, built and test - thus confirm the
> fix - that would be great.
>
> Build instructions on the wiki:
>
> http://linuxtv.org/wiki/index.php/How_to_Obtain%2C_Build_and_Install_V4L-DVB_Device_Drivers
>
> Thanks,
>
> - Steve
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

_________________________________________________________________
Rediscover Hotmail®: Now available on your iPhone or BlackBerry
http://windowslive.com/RediscoverHotmail?ocid=TXT_TAGLM_WL_HM_Rediscover_Mobile2_042009

Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[Steven Toth]

Thomas Nicolai wrote:
> I tried updating it just a few minutes ago.  After a restart, I tried using the card.  I still get no lights on the card and get no lock on any channels.  with MCE in windows I get about 6 channels at my location, all with very good signal strength.  
> 
> 
> Here is my output from lspci -vnn followed by the out put from dmesg.  I am sorry it is so long, I wanted to include it all in case you see something I missed.
> 
> 

<snip>

> 
> 
> ----------------------------------------
>> Date: Mon, 20 Apr 2009 21:51:27 -0400
>> From: stoth@linuxtv.org
>> Subject: Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)
>> To: pghben@yahoo.com
>> CC: linux-media@vger.kernel.org; mchehab@infradead.org
>>
>>> If there is anything I can do that will help you find the bug, please
>>> let me know..
>> The issue is fixed.
>>
>> http://linuxtv.org/hg/~stoth/cx23885-hvr1500/rev/7853c00870e1
>>
>> It's locking OK for me now. If you can clone, built and test - thus confirm the
>> fix - that would be great.
>>
>> Build instructions on the wiki:
>>
>> http://linuxtv.org/wiki/index.php/How_to_Obtain%2C_Build_and_Install_V4L-DVB_Device_Drivers
>>
>> Thanks,
>>
>> - Steve

Don't top-post. The protocol is to reply underneath the previous email.

Ben confirm the patch works correctly for him also, so I suspect you have some 
kind of build or installation problem. Maybe your missing firmware?

Your lspci and dmesg output looked good, I see no issues with this.

- Steve

RE: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[Thomas Nicolai]

Steve,

still haven't figured out how not to top post with Hotmail, Sorry. :-)  too much of  a newb at this.

When I get your update below do I pull with the normal method or do I need to pull just from that link?  What is the proper procedure for this?

Tom

> Date: Mon, 20 Apr 2009 21:51:27 -0400
> From: stoth@linuxtv.org
> Subject: Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)
> To: pghben@yahoo.com
> CC: linux-media@vger.kernel.org; mchehab@infradead.org
> 
>> 
>> If there is anything I can do that will help you find the bug, please 
>> let me know..
> 
> The issue is fixed.
> 
> http://linuxtv.org/hg/~stoth/cx23885-hvr1500/rev/7853c00870e1
> 
> It's locking OK for me now. If you can clone, built and test - thus confirm the 
> fix - that would be great.
> 
> Build instructions on the wiki:
> 
> http://linuxtv.org/wiki/index.php/How_to_Obtain%2C_Build_and_Install_V4L-DVB_Device_Drivers
> 
> Thanks,
> 
> - Steve
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

_________________________________________________________________
Rediscover Hotmail®: Now available on your iPhone or BlackBerry
http://windowslive.com/RediscoverHotmail?ocid=TXT_TAGLM_WL_HM_Rediscover_Mobile2_042009

Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[Steven Toth]

Thomas Nicolai wrote:
> Steve,
> 
> still haven't figured out how not to top post with Hotmail, Sorry. :-)  too much of  a newb at this.

Can't you scroll to the end of the email and insert your message?


> 
> When I get your update below do I pull with the normal method or do I need to pull just from that link?  What is the proper procedure for this?

See below.

> 
> Tom
> 
>> Date: Mon, 20 Apr 2009 21:51:27 -0400
>> From: stoth@linuxtv.org
>> Subject: Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)
>> To: pghben@yahoo.com
>> CC: linux-media@vger.kernel.org; mchehab@infradead.org
>>
>>> If there is anything I can do that will help you find the bug, please 
>>> let me know..
>> The issue is fixed.
>>
>> http://linuxtv.org/hg/~stoth/cx23885-hvr1500/rev/7853c00870e1
>>
>> It's locking OK for me now. If you can clone, built and test - thus confirm the 
>> fix - that would be great.
>>
>> Build instructions on the wiki:
>>
>> http://linuxtv.org/wiki/index.php/How_to_Obtain%2C_Build_and_Install_V4L-DVB_Device_Drivers
>>
>> Thanks,
>>
>> - Steve

Hey Tom,

I spoke with Ben off-list. He has kindly offered to walk you through the clone, 
build and install mechanisms off-list, in other words a little one-to-one help. 
Rather than repeat his email address here, exposing his address, please look 
back through the mailing list and contact him directly.

In the spirit of 'one good turn', if you can spend a few minutes to update the 
hvr-1500 product page on the linuxtv.org wiki 
(http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1500) then you'd be 
helping another user in the future :)

- Steve

RE: Hauppauge HVR-1500 (aka HP RM436AA#ABA)

[Thomas Nicolai]

I got it compiled and can tune channels.   Now i just need to get the frontend working.   "Thanks for checking into this Steve.


Tom

PS  Let me know when the patch gets committed and I will update the page you requested.

----------------------------------------
> Date: Tue, 21 Apr 2009 12:12:38 -0400
> From: stoth@linuxtv.org
> Subject: Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)
> To: nickotym@hotmail.com
> CC: linux-media@vger.kernel.org
>
> Thomas Nicolai wrote:
>> Steve,
>>
>> still haven't figured out how not to top post with Hotmail, Sorry. :-) too much of a newb at this.
>
> Can't you scroll to the end of the email and insert your message?
>
>
>>
>> When I get your update below do I pull with the normal method or do I need to pull just from that link? What is the proper procedure for this?
>
> See below.
>
>>
>> Tom
>>
>>> Date: Mon, 20 Apr 2009 21:51:27 -0400
>>> From: stoth@linuxtv.org
>>> Subject: Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)
>>> To: pghben@yahoo.com
>>> CC: linux-media@vger.kernel.org; mchehab@infradead.org
>>>
>>>> If there is anything I can do that will help you find the bug, please
>>>> let me know..
>>> The issue is fixed.
>>>
>>> http://linuxtv.org/hg/~stoth/cx23885-hvr1500/rev/7853c00870e1
>>>
>>> It's locking OK for me now. If you can clone, built and test - thus confirm the
>>> fix - that would be great.
>>>
>>> Build instructions on the wiki:
>>>
>>> http://linuxtv.org/wiki/index.php/How_to_Obtain%2C_Build_and_Install_V4L-DVB_Device_Drivers
>>>
>>> Thanks,
>>>
>>> - Steve
>
> Hey Tom,
>
> I spoke with Ben off-list. He has kindly offered to walk you through the clone,
> build and install mechanisms off-list, in other words a little one-to-one help.
> Rather than repeat his email address here, exposing his address, please look
> back through the mailing list and contact him directly.
>
> In the spirit of 'one good turn', if you can spend a few minutes to update the
> hvr-1500 product page on the linuxtv.org wiki
> (http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1500) then you'd be
> helping another user in the future :)
>
> - Steve
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

_________________________________________________________________
Rediscover Hotmail®: Get quick friend updates right in your inbox. 
http://windowslive.com/RediscoverHotmail?ocid=TXT_TAGLM_WL_HM_Rediscover_Updates2_042009