Re: [Xenomai-help] Problem of freeze

Re: [Xenomai-help] Problem of freeze

[btirefort]

>----- Mail Original -----
>De: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org>
>À: btirefort@domain.hid
>Cc: "xenomai-help" <xenomai@xenomai.org>
>Envoyé: Jeudi 23 Avril 2009 10h28:31 GMT +01:00 Amsterdam / Berlin / Berne / Rome / Stockholm / >Vienne
>Objet: Re: [Xenomai-help] Problem of freeze

> btirefort@domain.hid wrote:
>> Hello
>> 
>> I'am rookie in xenomai and i have a problem.
>>
>>Here my configuration :
>>
>>Linux base : CentOS v5.3 (with gnome)
>>kernel : linux-2.6.28.7
>><xenomai : 2.4.7
>> processor cpu familly  : 6
>>               type : 14 (Intel Core Duo T2500 2Ghz)
>> memory : 1 GB
>> HDD : SCSI with Adaptec AIC-7892B card
>> 
>> I have installed xenomai with no problem.
>> All options of ACPI, APM and CPU frequency scaling are disabled.

>This is wrong. You should enable ACPI, and only disable ACPI_PROCESSOR.
>Disabling ACPI is known to cause bugs with Linux on some machines.

>-- 
>					    Gilles.

Thanks for your reply
So now ACPI is enable and ACPI PROCESSOR Disable

I use xenomai with the patch adeos-ipipe-2.6.28.9-x86-2.2-07.patch from the Xenomai git

But i have the same problem :(

I have a question, when I configure the kernel, for the procesor type, can i use th right type for me (core 2) or I must use only 6x86MX type ?


Benoit

Re: [Xenomai-help] Problem of freeze

[Gilles Chanteperdrix]

btirefort@domain.hid wrote:
>> ----- Mail Original -----
>> De: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org>
>> À: btirefort@domain.hid
>> Cc: "xenomai-help" <xenomai@xenomai.org>
>> Envoyé: Jeudi 23 Avril 2009 10h28:31 GMT +01:00 Amsterdam / Berlin / Berne / Rome / Stockholm / >Vienne
>> Objet: Re: [Xenomai-help] Problem of freeze
> 
>> btirefort@domain.hid wrote:
>>> Hello
>>>
>>> I'am rookie in xenomai and i have a problem.
>>>
>>> Here my configuration :
>>>
>>> Linux base : CentOS v5.3 (with gnome)
>>> kernel : linux-2.6.28.7
>>> <xenomai : 2.4.7
>>> processor cpu familly  : 6
>>>               type : 14 (Intel Core Duo T2500 2Ghz)
>>> memory : 1 GB
>>> HDD : SCSI with Adaptec AIC-7892B card
>>>
>>> I have installed xenomai with no problem.
>>> All options of ACPI, APM and CPU frequency scaling are disabled.
> 
>> This is wrong. You should enable ACPI, and only disable ACPI_PROCESSOR.
>> Disabling ACPI is known to cause bugs with Linux on some machines.
> 
>> -- 
>> 					    Gilles.
> 
> Thanks for your reply
> So now ACPI is enable and ACPI PROCESSOR Disable
> 
> I use xenomai with the patch adeos-ipipe-2.6.28.9-x86-2.2-07.patch from the Xenomai git
> 
> But i have the same problem :(
> 
> I have a question, when I configure the kernel, for the procesor type, can i use th right type for me (core 2) or I must use only 6x86MX type ?

No you should use the right type for your procsesor.

I see that you are using X-window, so I guess you do not see the
console. Unfortunately, if your hang is due to a kernel oops we do not
have a clue. So, you should try and get the console output on another
machine, using preferably a serial cable, or if not possible the netconsole.

-- 
                                                 Gilles.

Re: [Xenomai-help] Problem of freeze

[Raistlin]

[-- Attachment #1: Type: text/plain, Size: 1171 bytes --]

On Thu, 2009-04-23 at 15:30 +0200, Gilles Chanteperdrix wrote:
> > I use xenomai with the patch adeos-ipipe-2.6.28.9-x86-2.2-07.patch from the Xenomai git
> > 
> > But i have the same problem :(
Just to make you know that I'm (still) experimenting exactly the same
random freeze on Ubuntu Jaunty, with 2.6.28.9 kernel,
adeos-ipipe-2.6.28.9... patch and xenomai-git (but I think that does not
matter, since it seems a kernel issue!!)

> I see that you are using X-window, so I guess you do not see the
> console. Unfortunately, if your hang is due to a kernel oops we do not
> have a clue. So, you should try and get the console output on another
> machine, using preferably a serial cable, or if not possible the netconsole.
I'll try to setup a netconsole environment as soon possible and let you
know what I can see in the kernel logs.

Regards,
Dario

-- 
<<This happens because I choose it to happen!>> (Raistlin Majere)
----------------------------------------------------------------------
Dario Faggioli, ReTiS Lab, Scuola Superiore Sant'Anna, Pisa  (Italy)

http://blog.linux.it/raistlin / raistlin@domain.hid /
dario.faggioli@domain.hid

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

Re: [Xenomai-help] Problem of freeze

[Gilles Chanteperdrix]

Raistlin wrote:
> On Thu, 2009-04-23 at 15:30 +0200, Gilles Chanteperdrix wrote:
>>> I use xenomai with the patch adeos-ipipe-2.6.28.9-x86-2.2-07.patch from the Xenomai git
>>>
>>> But i have the same problem :(
> Just to make you know that I'm (still) experimenting exactly the same
> random freeze on Ubuntu Jaunty, with 2.6.28.9 kernel,
> adeos-ipipe-2.6.28.9... patch and xenomai-git (but I think that does not
> matter, since it seems a kernel issue!!)
> 
>> I see that you are using X-window, so I guess you do not see the
>> console. Unfortunately, if your hang is due to a kernel oops we do not
>> have a clue. So, you should try and get the console output on another
>> machine, using preferably a serial cable, or if not possible the netconsole.
> I'll try to setup a netconsole environment as soon possible and let you
> know what I can see in the kernel logs.

As usual, please send us /proc/interrupts, /proc/xenomai/irq, your
.config, and the version of the I-pipe patch you use.

Run the latency and switchtest tests, and tell us if you have the freeze
with them too.

-- 
                                                 Gilles.

Re: [Xenomai-help] Problem of freeze

[Gilles Chanteperdrix]

Gilles Chanteperdrix wrote:
> Raistlin wrote:
>> On Thu, 2009-04-23 at 15:30 +0200, Gilles Chanteperdrix wrote:
>>>> I use xenomai with the patch adeos-ipipe-2.6.28.9-x86-2.2-07.patch from the Xenomai git
>>>>
>>>> But i have the same problem :(
>> Just to make you know that I'm (still) experimenting exactly the same
>> random freeze on Ubuntu Jaunty, with 2.6.28.9 kernel,
>> adeos-ipipe-2.6.28.9... patch and xenomai-git (but I think that does not
>> matter, since it seems a kernel issue!!)
>>
>>> I see that you are using X-window, so I guess you do not see the
>>> console. Unfortunately, if your hang is due to a kernel oops we do not
>>> have a clue. So, you should try and get the console output on another
>>> machine, using preferably a serial cable, or if not possible the netconsole.
>> I'll try to setup a netconsole environment as soon possible and let you
>> know what I can see in the kernel logs.
> 
> As usual, please send us /proc/interrupts, /proc/xenomai/irq, your
> .config, and the version of the I-pipe patch you use.
> 
> Run the latency and switchtest tests, and tell us if you have the freeze
> with them too.

Also, Benoit's problem was not in fact due to xenomai but to gnome power
management. This shows that the notion of "freeze" is very vague, and
without further information, we can not tell you more.

-- 
                                                 Gilles.

Re: [Xenomai-help] Problem of freeze

[Raistlin]

[-- Attachment #1: Type: text/plain, Size: 1394 bytes --]

On Thu, 2009-05-07 at 14:37 +0200, Gilles Chanteperdrix wrote:
> > As usual, please send us /proc/interrupts, /proc/xenomai/irq, your
> > .config, and the version of the I-pipe patch you use.
> > 
I will.

> > Run the latency and switchtest tests, and tell us if you have the freeze
> > with them too.
> 
It has happened once during a test (latency I think), but I've also been
(next times, after reboot) able to run both of them without any issue.

Anyway, as soon as I reboot I'll run all the tests again.

> Also, Benoit's problem was not in fact due to xenomai but to gnome power
> management. 
I see... Well, of course, all is possible... I'm using
gnome-power-manager too, but while running plain Ubuntu kernel no freeze
happens, but... I mean... Who knows?!?!

> This shows that the notion of "freeze" is very vague, and
> without further information, we can not tell you more.
I know, and I'm sorry of being able to be more specific since now. :-(
I'll test it deeper and let you know in detail.

For now, thanks a lot for your support! :-)

Regards,
Dario

-- 
<<This happens because I choose it to happen!>> (Raistlin Majere)
----------------------------------------------------------------------
Dario Faggioli, ReTiS Lab, Scuola Superiore Sant'Anna, Pisa  (Italy)

http://blog.linux.it/raistlin / raistlin@domain.hid /
dario.faggioli@domain.hid

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

Re: [Xenomai-help] Problem of freeze

[Philippe Gerum]

On Thu, 2009-05-07 at 14:47 +0200, Raistlin wrote:
> On Thu, 2009-05-07 at 14:37 +0200, Gilles Chanteperdrix wrote:
> > > As usual, please send us /proc/interrupts, /proc/xenomai/irq, your
> > > .config, and the version of the I-pipe patch you use.
> > > 
> I will.
> 
> > > Run the latency and switchtest tests, and tell us if you have the freeze
> > > with them too.
> > 
> It has happened once during a test (latency I think), but I've also been
> (next times, after reboot) able to run both of them without any issue.
> 
> Anyway, as soon as I reboot I'll run all the tests again.
> 
> > Also, Benoit's problem was not in fact due to xenomai but to gnome power
> > management. 
> I see... Well, of course, all is possible... I'm using
> gnome-power-manager too, but while running plain Ubuntu kernel no freeze
> happens, but... I mean... Who knows?!?!

The point is not about blaming Gnome PM, but we do know for sure that
power management related drivers may have adverse effects on a
Xenomai-patched kernel - see the troubleshooting guide. If your kernel
enable those, and Gnome PM triggers actions on those such as CPU freq
governors, bad things may happen.

You .config will confirm or not whether this assumption is correct.

> 
> > This shows that the notion of "freeze" is very vague, and
> > without further information, we can not tell you more.
> I know, and I'm sorry of being able to be more specific since now. :-(
> I'll test it deeper and let you know in detail.
> 
> For now, thanks a lot for your support! :-)
> 
> Regards,
> Dario
> 
> _______________________________________________
> Xenomai-help mailing list
> Xenomai-help@domain.hid
> https://mail.gna.org/listinfo/xenomai-help
-- 
Philippe.

Re: [Xenomai-help] Problem of freeze

[Gilles Chanteperdrix]

Philippe Gerum wrote:
> On Thu, 2009-05-07 at 14:47 +0200, Raistlin wrote:
>> On Thu, 2009-05-07 at 14:37 +0200, Gilles Chanteperdrix wrote:
>>>> As usual, please send us /proc/interrupts, /proc/xenomai/irq, your
>>>> .config, and the version of the I-pipe patch you use.
>>>>
>> I will.
>>
>>>> Run the latency and switchtest tests, and tell us if you have the freeze
>>>> with them too.
>> It has happened once during a test (latency I think), but I've also been
>> (next times, after reboot) able to run both of them without any issue.
>>
>> Anyway, as soon as I reboot I'll run all the tests again.
>>
>>> Also, Benoit's problem was not in fact due to xenomai but to gnome power
>>> management. 
>> I see... Well, of course, all is possible... I'm using
>> gnome-power-manager too, but while running plain Ubuntu kernel no freeze
>> happens, but... I mean... Who knows?!?!
> 
> The point is not about blaming Gnome PM, but we do know for sure that
> power management related drivers may have adverse effects on a
> Xenomai-patched kernel - see the troubleshooting guide. If your kernel
> enable those, and Gnome PM triggers actions on those such as CPU freq
> governors, bad things may happen.
> 
> You .config will confirm or not whether this assumption is correct.

The problem could also be that gnome-power-management is trying to use
services from the kernel which are not available because power
management is disabled in kernel configuration.

-- 
                                                 Gilles.

Re: [Xenomai-help] Problem of freeze

[btirefort]

Hello

Sorry for the delay
I found my problem of freeze, I tell it for information.

My X system (using gnome) is now stable.
The solution : I have desintalled gnome-power-manager

very thanks for your help

Benoit

----- Mail Original -----
De: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org>
À: btirefort@domain.hid
Cc: "Jan Kiszka" <jan.kiszka@domain.hid>, "xenomai-help" <xenomai@xenomai.org>
Envoyé: Jeudi 23 Avril 2009 15h30:31 GMT +01:00 Amsterdam / Berlin / Berne / Rome / Stockholm / Vienne
Objet: Re: [Xenomai-help] Problem of freeze

btirefort@domain.hid wrote:
>> ----- Mail Original -----
>> De: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org>
>> À: btirefort@domain.hid
>> Cc: "xenomai-help" <xenomai@xenomai.org>
>> Envoyé: Jeudi 23 Avril 2009 10h28:31 GMT +01:00 Amsterdam / Berlin / Berne / Rome / Stockholm / >Vienne
>> Objet: Re: [Xenomai-help] Problem of freeze
> 
>> btirefort@domain.hid wrote:
>>> Hello
>>>
>>> I'am rookie in xenomai and i have a problem.
>>>
>>> Here my configuration :
>>>
>>> Linux base : CentOS v5.3 (with gnome)
>>> kernel : linux-2.6.28.7
>>> <xenomai : 2.4.7
>>> processor cpu familly  : 6
>>>               type : 14 (Intel Core Duo T2500 2Ghz)
>>> memory : 1 GB
>>> HDD : SCSI with Adaptec AIC-7892B card
>>>
>>> I have installed xenomai with no problem.
>>> All options of ACPI, APM and CPU frequency scaling are disabled.
> 
>> This is wrong. You should enable ACPI, and only disable ACPI_PROCESSOR.
>> Disabling ACPI is known to cause bugs with Linux on some machines.
> 
>> -- 
>> 					    Gilles.
> 
> Thanks for your reply
> So now ACPI is enable and ACPI PROCESSOR Disable
> 
> I use xenomai with the patch adeos-ipipe-2.6.28.9-x86-2.2-07.patch from the Xenomai git
> 
> But i have the same problem :(
> 
> I have a question, when I configure the kernel, for the procesor type, can i use th right type for me (core 2) or I must use only 6x86MX type ?

No you should use the right type for your procsesor.

I see that you are using X-window, so I guess you do not see the
console. Unfortunately, if your hang is due to a kernel oops we do not
have a clue. So, you should try and get the console output on another
machine, using preferably a serial cable, or if not possible the netconsole.

-- 
                                                 Gilles.

Re: [Xenomai-help] Problem of freeze

[John Yamokoski]

Greetings,

I have the same freezing problem after compiling/installing/running an
adeos patched kernel on an Ubuntu system. Unfortunately to uninstall
gnome-power-manager I must also uninstall 'ubuntu-desktop'.. which I
am not sure I want to do.

Any ideas? Do I need to switch to a different window manager? Is there
some setting with gnome-power-manager I can set that will avoid the
freezing?

I will also query the ubuntu community. If I hear anything back I will
post it here.

J.D.


On Tue, May 5, 2009 at 8:04 AM,  <btirefort@domain.hid> wrote:
> Hello
>
> Sorry for the delay
> I found my problem of freeze, I tell it for information.
>
> My X system (using gnome) is now stable.
> The solution : I have desintalled gnome-power-manager
>
> very thanks for your help
>
> Benoit
>
> ----- Mail Original -----
> De: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org>
> À: btirefort@domain.hid
> Cc: "Jan Kiszka" <jan.kiszka@domain.hid>, "xenomai-help" <xenomai@xenomai.orgg>
> Envoyé: Jeudi 23 Avril 2009 15h30:31 GMT +01:00 Amsterdam / Berlin / Berne / Rome / Stockholm / Vienne
> Objet: Re: [Xenomai-help] Problem of freeze
>
> btirefort@domain.hid wrote:
>>> ----- Mail Original -----
>>> De: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org>
>>> À: btirefort@domain.hid
>>> Cc: "xenomai-help" <xenomai@xenomai.org>
>>> Envoyé: Jeudi 23 Avril 2009 10h28:31 GMT +01:00 Amsterdam / Berlin / Berne / Rome / Stockholm / >Vienne
>>> Objet: Re: [Xenomai-help] Problem of freeze
>>
>>> btirefort@domain.hid wrote:
>>>> Hello
>>>>
>>>> I'am rookie in xenomai and i have a problem.
>>>>
>>>> Here my configuration :
>>>>
>>>> Linux base : CentOS v5.3 (with gnome)
>>>> kernel : linux-2.6.28.7
>>>> <xenomai : 2.4.7
>>>> processor cpu familly  : 6
>>>>               type : 14 (Intel Core Duo T2500 2Ghz)
>>>> memory : 1 GB
>>>> HDD : SCSI with Adaptec AIC-7892B card
>>>>
>>>> I have installed xenomai with no problem.
>>>> All options of ACPI, APM and CPU frequency scaling are disabled.
>>
>>> This is wrong. You should enable ACPI, and only disable ACPI_PROCESSOR.
>>> Disabling ACPI is known to cause bugs with Linux on some machines.
>>
>>> --
>>>                                          Gilles.
>>
>> Thanks for your reply
>> So now ACPI is enable and ACPI PROCESSOR Disable
>>
>> I use xenomai with the patch adeos-ipipe-2.6.28.9-x86-2.2-07.patch from the Xenomai git
>>
>> But i have the same problem :(
>>
>> I have a question, when I configure the kernel, for the procesor type, can i use th right type for me (core 2) or I must use only 6x86MX type ?
>
> No you should use the right type for your procsesor.
>
> I see that you are using X-window, so I guess you do not see the
> console. Unfortunately, if your hang is due to a kernel oops we do not
> have a clue. So, you should try and get the console output on another
> machine, using preferably a serial cable, or if not possible the netconsole.
>
> --
>                                                 Gilles.
>
>
> _______________________________________________
> Xenomai-help mailing list
> Xenomai-help@domain.hid
> https://mail.gna.org/listinfo/xenomai-help
>

Re: [Xenomai-help] Problem of freeze

[Gilles Chanteperdrix]

John Yamokoski wrote:
> Greetings,
> 
> I have the same freezing problem after compiling/installing/running an
> adeos patched kernel on an Ubuntu system. Unfortunately to uninstall
> gnome-power-manager I must also uninstall 'ubuntu-desktop'.. which I
> am not sure I want to do.
> 
> Any ideas? Do I need to switch to a different window manager? Is there
> some setting with gnome-power-manager I can set that will avoid the
> freezing?
> 
> I will also query the ubuntu community. If I hear anything back I will
> post it here.

Ok people. Please all stop thinking that you have the same problem as
Benoit. There are many ways to get freezes, it could be configuration
problems, irq sharing problems, adeos patch problems, drivers problems,
problems in real-time applications (such as infinite loop in a real-time
thread). So, stop jumping quickly to conclusions, do what we are asking
you, and provide feedback on your experiences.

-- 
                                                 Gilles.

[Xenomai-help] Problem of freeze

[btirefort]

Hello

I'am rookie in xenomai and i have a problem.

Here my configuration :

Linux base : CentOS v5.3 (with gnome)
kernel : linux-2.6.28.7
xenomai : 2.4.7
processor cpu familly  : 6
              type : 14 (Intel Core Duo T2500 2Ghz)
memory : 1 GB
HDD : SCSI with Adaptec AIC-7892B card

I have installed xenomai with no problem.
All options of ACPI, APM and CPU frequency scaling are disabled.

All seems to be good, but i have a problem :

Sometimes the system freeze, and i must reset the computer.
The system freeze sometimes during the connection to gnome (when gnome are enabling my desktop).
The system freeze also, when i am leaving the scrennsaver after a long period without using (after nigth for example).
The system freeze all the time when I try to launch netbeans program.

I don't understand why.

Can you help me please ?

Benoit

Re: [Xenomai-help] Problem of freeze

[Jan Kiszka]

[-- Attachment #1: Type: text/plain, Size: 1125 bytes --]

btirefort@domain.hid wrote:
> Hello
> 
> I'am rookie in xenomai and i have a problem.
> 
> Here my configuration :
> 
> Linux base : CentOS v5.3 (with gnome)
> kernel : linux-2.6.28.7
> xenomai : 2.4.7
> processor cpu familly  : 6
>               type : 14 (Intel Core Duo T2500 2Ghz)
> memory : 1 GB
> HDD : SCSI with Adaptec AIC-7892B card
> 
> I have installed xenomai with no problem.
> All options of ACPI, APM and CPU frequency scaling are disabled.
> 
> All seems to be good, but i have a problem :
> 
> Sometimes the system freeze, and i must reset the computer.
> The system freeze sometimes during the connection to gnome (when gnome are enabling my desktop).
> The system freeze also, when i am leaving the scrennsaver after a long period without using (after nigth for example).
> The system freeze all the time when I try to launch netbeans program.
> 
> I don't understand why.
> 
> Can you help me please ?

Please try adeos-ipipe-2.6.28.9-x86-2.2-07.patch from the Xenomai git
repository, it will probably fix you issue (in any case, feedback would
be very welcome!).

Jan


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 257 bytes --]

Re: [Xenomai-help] Problem of freeze

[Gilles Chanteperdrix]

btirefort@domain.hid wrote:
> Hello
> 
> I'am rookie in xenomai and i have a problem.
> 
> Here my configuration :
> 
> Linux base : CentOS v5.3 (with gnome)
> kernel : linux-2.6.28.7
> xenomai : 2.4.7
> processor cpu familly  : 6
>               type : 14 (Intel Core Duo T2500 2Ghz)
> memory : 1 GB
> HDD : SCSI with Adaptec AIC-7892B card
> 
> I have installed xenomai with no problem.
> All options of ACPI, APM and CPU frequency scaling are disabled.

This is wrong. You should enable ACPI, and only disable ACPI_PROCESSOR.
Disabling ACPI is known to cause bugs with Linux on some machines.

-- 
					    Gilles.