* Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-22 12:36 Teo En Ming
2009-07-22 13:30 ` Pasi Kärkkäinen
0 siblings, 1 reply; 86+ messages in thread
From: Teo En Ming @ 2009-07-22 12:36 UTC (permalink / raw)
To: xen-devel; +Cc: enming.teo
[-- Attachment #1.1: Type: text/plain, Size: 543 bytes --]
Hi All,
I followed the instructions here at
http://bderzhavets.wordpress.com/2009/06/10/setup-fedora-11-pv-domu-at-xen-3-4-1-dom0-kernel-2-6-30-rc6-tip-on-top-of-fedora-11/
However, when I do a "make menuconfig", I cannot see any XEN related
configuration options. What am I missing?
Thank you.
Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
[-- Attachment #1.2: Type: text/html, Size: 792 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-22 12:57 Boris Derzhavets
2009-07-22 13:00 ` Teo En Ming
2009-07-22 13:31 ` Pasi Kärkkäinen
0 siblings, 2 replies; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-22 12:57 UTC (permalink / raw)
To: xen-devel; +Cc: enming.teo
[-- Attachment #1.1: Type: text/plain, Size: 1407 bytes --]
If you checked out :-
git checkout origin/xen-tip/next -b xen-tip/next
then try another branch
git checkout origin/rebase/master -b rebase/master
First one may be outdated in meantime.
Address it to Jeremy Fitzhardinge, for qualified respond.
Boris.
--- On Wed, 7/22/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: xen-devel@lists.xensource.com
Cc: enming.teo@asiasoftsea.net
Date: Wednesday, July 22, 2009, 8:36 AM
Hi All,
I followed the instructions here at
http://bderzhavets.wordpress.com/2009/06/10/setup-fedora-11-pv-domu-at-xen-3-4-1-dom0-kernel-2-6-30-rc6-tip-on-top-of-fedora-11/
However, when I do a "make menuconfig", I cannot see any XEN related
configuration options. What am I missing?
Thank you.
Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 2172 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-22 12:57 Boris Derzhavets
@ 2009-07-22 13:00 ` Teo En Ming
2009-07-22 13:16 ` Teo En Ming
2009-07-22 13:33 ` Pasi Kärkkäinen
2009-07-22 13:31 ` Pasi Kärkkäinen
1 sibling, 2 replies; 86+ messages in thread
From: Teo En Ming @ 2009-07-22 13:00 UTC (permalink / raw)
To: Boris Derzhavets, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 2311 bytes --]
Thank you! I will go and check it out.
Another question: The latest stock kernel 2.6.30.2 from kernel.org is
paravirt-ops enabled (since 2.6.20) but it does not support Xen Dom 0? Only
Jeremy's pv_ops enable kernel support Xen Dom 0?
The other approach to use Xen is not to use pvops enabled kernel but to
apply patches to the stock kernel to Xenify it?
Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com, enming.teo@asiasoftsea.net
Cc: enming.teo@asiasoftsea.net
Date: Wed, 22 Jul 2009 05:57:10 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
If you checked out :-
git checkout origin/xen-tip/next -b xen-tip/next
then try another branchgit checkout origin/rebase/master -b rebase/master
First one may be outdated in meantime.
Address it to Jeremy Fitzhardinge, for qualified respond.
Boris.
--- On Wed, 7/22/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: xen-devel@lists.xensource.com
Cc: enming.teo@asiasoftsea.net
Date: Wednesday, July 22, 2009, 8:36 AM
Hi All,
I followed the instructions here at
http://bderzhavets.wordpress.com/2009/06/10/setup-fedora-11-pv-domu-at-xen-3-4-1-dom0-kernel-2-6-30-rc6-tip-on-top-of-fedora-11/
However, when I do a "make menuconfig", I cannot see any XEN related
configuration options. What am I missing?
Thank you.
Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=Xen-devel@lists.xensource.com]
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 4375 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-22 13:00 ` Teo En Ming
@ 2009-07-22 13:16 ` Teo En Ming
2009-07-22 13:33 ` Pasi Kärkkäinen
1 sibling, 0 replies; 86+ messages in thread
From: Teo En Ming @ 2009-07-22 13:16 UTC (permalink / raw)
To: Teo En Ming, Boris Derzhavets, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 3518 bytes --]
Hi,
I used the rebase/master branch as suggested but I still don't see any Xen
related options. Please see screenshot.
http://i25.tinypic.com/15wxg0x.jpg
FYI I am using OpenSUSE 11.1 32-bit with Intel Core 2 Duo VMX processor flag
(hardware virtualization extensions).
Thank you.
Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Cc:
Date: Wed, 22 Jul 2009 21:00:52 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Thank you! I will go and check it out.
Another question: The latest stock kernel 2.6.30.2 from kernel.org is
paravirt-ops enabled (since 2.6.20) but it does not support Xen Dom 0? Only
Jeremy's pv_ops enable kernel support Xen Dom 0?
The other approach to use Xen is not to use pvops enabled kernel but to
apply patches to the stock kernel to Xenify it?
Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com, enming.teo@asiasoftsea.net
Cc: enming.teo@asiasoftsea.net
Date: Wed, 22 Jul 2009 05:57:10 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
If you checked out :-
git checkout origin/xen-tip/next -b xen-tip/next
then try another branchgit checkout origin/rebase/master -b rebase/master
First one may be outdated in meantime.
Address it to Jeremy Fitzhardinge, for qualified respond.
Boris.
--- On Wed, 7/22/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: xen-devel@lists.xensource.com
Cc: enming.teo@asiasoftsea.net
Date: Wednesday, July 22, 2009, 8:36 AM
Hi All,
I followed the instructions here at
http://bderzhavets.wordpress.com/2009/06/10/setup-fedora-11-pv-domu-at-xen-3-4-1-dom0-kernel-2-6-30-rc6-tip-on-top-of-fedora-11/
However, when I do a "make menuconfig", I cannot see any XEN
related configuration options. What am I missing?
Thank you.
Mr. Teo En Ming Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=Xen-devel@lists.xensource.com]
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 5867 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-22 13:25 Boris Derzhavets
0 siblings, 0 replies; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-22 13:25 UTC (permalink / raw)
To: xen-devel, enming.teo
[-- Attachment #1.1: Type: text/plain, Size: 3824 bytes --]
Vanilla 2.6.30.1 may be xenified via Andy Lyon's patch set (aka Suse), i.e.
to be able Support Xen in Dom0. View :-
http://bderzhavets.wordpress.com/2009/07/07/building-xenified-2-6-30-1-kernel-via-xen-patches-2-6-30-2-tar-bz2/
It's also seems to be pretty stable at runtime under Xen 3.4.1 Hypervisor.
I didn't test 2.6.30.2 , but you may try to apply Andy's patch set and see
what happens.
Boris.
--- On Wed, 7/22/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Wednesday, July 22, 2009, 9:00 AM
Thank you! I will go and check it out.
Another question: The latest stock kernel 2.6.30.2 from kernel.org is
paravirt-ops enabled (since 2.6.20) but it does not support Xen Dom 0? Only
Jeremy's pv_ops enable kernel support Xen Dom 0?
The other approach to use Xen is not to use pvops enabled kernel but to
apply patches to the stock kernel to Xenify it?
Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com, enming.teo@asiasoftsea.net
Cc: enming.teo@asiasoftsea.net
Date: Wed, 22 Jul 2009 05:57:10 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
If you checked out :-
git checkout origin/xen-tip/next -b xen-tip/next
then try another branch
git checkout origin/rebase/master -b rebase/master
First one may be outdated in meantime.
Address it to Jeremy Fitzhardinge, for qualified respond.
Boris.
--- On Wed, 7/22/09, Teo En Ming
<enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: xen-devel@lists.xensource.com
Cc: enming.teo@asiasoftsea.net
Date: Wednesday, July 22, 2009, 8:36 AM
Hi All,
I followed the instructions here at
http://bderzhavets.wordpress.com/2009/06/10/setup-fedora-11-pv-domu-at-xen-3-4-1-dom0-kernel-2-6-30-rc6-tip-on-top-of-fedora-11/
However, when I do a "make menuconfig", I cannot see any XEN
related configuration options. What am I missing?
Thank you.
Mr. Teo En Ming Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 5339 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-22 12:36 Teo En Ming
@ 2009-07-22 13:30 ` Pasi Kärkkäinen
2009-07-22 13:54 ` Teo En Ming
0 siblings, 1 reply; 86+ messages in thread
From: Pasi Kärkkäinen @ 2009-07-22 13:30 UTC (permalink / raw)
To: Teo En Ming; +Cc: xen-devel
On Wed, Jul 22, 2009 at 08:36:26PM +0800, Teo En Ming wrote:
> Hi All,
>
> I followed the instructions here at
> http://bderzhavets.wordpress.com/2009/06/10/setup-fedora-11-pv-domu-at-xen-3-4-1-dom0-kernel-2-6-30-rc6-tip-on-top-of-fedora-11/
>
> However, when I do a "make menuconfig", I cannot see any XEN related
> configuration options. What am I missing?
>
http://wiki.xensource.com/xenwiki/XenParavirtOps
If you're compiling 32b kernel, you need to first enable PAE support, before
you get the Xen options in menuconfig. Detailt in the URL above.
-- Pasi
> Thank you.
>
> Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
> Engineering)
>
> Technical Support Engineer
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Mobile: +65-96489798
> MSN: teoenming@hotmail.com
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-22 12:57 Boris Derzhavets
2009-07-22 13:00 ` Teo En Ming
@ 2009-07-22 13:31 ` Pasi Kärkkäinen
2009-07-22 14:10 ` Teo En Ming
1 sibling, 1 reply; 86+ messages in thread
From: Pasi Kärkkäinen @ 2009-07-22 13:31 UTC (permalink / raw)
To: Boris Derzhavets; +Cc: xen-devel, enming.teo
On Wed, Jul 22, 2009 at 05:57:10AM -0700, Boris Derzhavets wrote:
> If you checked out :-
>
> git checkout origin/xen-tip/next -b xen-tip/next
>
> then try another branch
>
> git checkout origin/rebase/master -b rebase/master
>
> First one may be outdated in meantime.
>
Btw rebase/master (2.6.31-rc3) doesn't work currently on 32b PAE. It'll crash during startup.
xen-tip/next (2.6.30-rc6) works on 32b PAE.
-- Pasi
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-22 13:00 ` Teo En Ming
2009-07-22 13:16 ` Teo En Ming
@ 2009-07-22 13:33 ` Pasi Kärkkäinen
1 sibling, 0 replies; 86+ messages in thread
From: Pasi Kärkkäinen @ 2009-07-22 13:33 UTC (permalink / raw)
To: Teo En Ming; +Cc: Boris Derzhavets, xen-devel
On Wed, Jul 22, 2009 at 09:00:52PM +0800, Teo En Ming wrote:
> Thank you! I will go and check it out.
>
> Another question: The latest stock kernel 2.6.30.2 from kernel.org is
> paravirt-ops enabled (since 2.6.20) but it does not support Xen Dom 0? Only
> Jeremy's pv_ops enable kernel support Xen Dom 0?
>
Yes, exactly.
Jeremy is working on getting pv_ops Xen dom0 support included in mainline
Linux, but it's not included yet.
> The other approach to use Xen is not to use pvops enabled kernel but to
> apply patches to the stock kernel to Xenify it?
>
Yes.
See: http://wiki.xensource.com/xenwiki/XenDom0Kernels
-- Pasi
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-22 13:36 Boris Derzhavets
2009-07-22 13:59 ` Teo En Ming
0 siblings, 1 reply; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-22 13:36 UTC (permalink / raw)
To: enming.teo, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 5059 bytes --]
Actually, you seems to be the second person complaining this issue.
I would suggest 64-bit distro ( you are on Core2Duo) to build the most recent Jeremy's kernel. Personally, i succeeded on F11 and Ubuntu 9.04 Server both x86_64.
You might also experience problem with building 2.6.30.X Xenified kernel due to same 32-bit env. Workaround is well known, however it's pain again.
Boris.
P.S. Once again address PVOPS issues to Jeremy.
--- On Wed, 7/22/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Teo En Ming" <enming.teo@asiasoftsea.net>, "Boris Derzhavets" <bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Wednesday, July 22, 2009, 9:16 AM
Hi,
I used the rebase/master branch as suggested but I still don't see any
Xen related options. Please see screenshot.
http://i25.tinypic.com/15wxg0x.jpg
FYI I am using OpenSUSE 11.1 32-bit with Intel Core 2 Duo VMX processor
flag (hardware virtualization extensions).
Thank you.
Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Cc:
Date: Wed, 22 Jul 2009 21:00:52 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Thank you! I will go and check it out.
Another question: The latest stock kernel 2.6.30.2 from kernel.org is
paravirt-ops enabled (since 2.6.20) but it does not support Xen Dom 0? Only
Jeremy's pv_ops enable kernel support Xen Dom 0?
The other approach to use Xen is not to use pvops enabled kernel but
to apply patches to the stock kernel to Xenify it?
Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com, enming.teo@asiasoftsea.net
Cc: enming.teo@asiasoftsea.net
Date: Wed, 22 Jul 2009 05:57:10 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
If you
checked out :-
git checkout origin/xen-tip/next -b xen-tip/next
then try another branch
git checkout origin/rebase/master -b rebase/master
First one may be outdated in meantime.
Address it to Jeremy Fitzhardinge, for qualified respond.
Boris.
--- On Wed, 7/22/09, Teo En Ming
<enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: xen-devel@lists.xensource.com
Cc: enming.teo@asiasoftsea.net
Date: Wednesday, July 22, 2009, 8:36 AM
Hi All,
I followed the instructions here at
http://bderzhavets.wordpress.com/2009/06/10/setup-fedora-11-pv-domu-at-xen-3-4-1-dom0-kernel-2-6-30-rc6-tip-on-top-of-fedora-11/
However, when I do a "make menuconfig", I cannot see any
XEN related configuration options. What am I missing?
Thank you.
Mr. Teo En Ming Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 6976 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-22 13:30 ` Pasi Kärkkäinen
@ 2009-07-22 13:54 ` Teo En Ming
2009-07-22 15:40 ` Teo En Ming
0 siblings, 1 reply; 86+ messages in thread
From: Teo En Ming @ 2009-07-22 13:54 UTC (permalink / raw)
To: Pasi Kärkkäinen; +Cc: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 3212 bytes --]
Thank you!
I have enabled PAE support and the XEN Dom0 options show up.
However, when I tried to copy over the .config from the default OpenSUSE
11.1 32-bit kernel (/boot directory), do a "make oldconfig" and then a "make
menuconfig", the Xen Dom0 options do not show up anymore even though I have
enabled PAE support. Any idea why this is so?
If I do a make oldconfig using Opensuse 11.1 default config, then a make
menuconfig and then Xen options do not show up, can I edit
linux-2.6-xen/.config directly using vi and then add the following Xen
configuration options manually?CONFIG_XEN=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=32
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_PCI=y
CONFIG_PCI_XEN=y
CONFIG_XEN_BLKDEV_FRONTEND=m
CONFIG_NETXEN_NIC=m
CONFIG_XEN_NETDEV_FRONTEND=m
CONFIG_XEN_KBDDEV_FRONTEND=m
CONFIG_HVC_XEN=y
CONFIG_XEN_FBDEV_FRONTEND=m
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XEN_BACKEND=y
CONFIG_XEN_BLKDEV_BACKEND=y
CONFIG_XEN_NETDEV_BACKEND=y
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_XENBUS_FRONTEND=mThank you!
Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming <enming.teo@asiasoftsea.net>
Cc: xen-devel@lists.xensource.com
Date: Wed, 22 Jul 2009 16:30:12 +0300
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Wed, Jul 22, 2009 at 08:36:26PM +0800, Teo En Ming wrote:
> Hi All,
>
> I followed the instructions here at
>
http://bderzhavets.wordpress.com/2009/06/10/setup-fedora-11-pv-domu-at-xen-3-4-1-dom0-kernel-2-6-30-rc6-tip-on-top-of-fedora-11/
[http://bderzhavets.wordpress.com/2009/06/10/setup-fedora-11-pv-domu-at-xen-3-4-1-dom0-kernel-2-6-30-rc6-tip-on-top-of-fedora-11/]
>
> However, when I do a "make menuconfig", I cannot see any XEN related
> configuration options. What am I missing?
>
http://wiki.xensource.com/xenwiki/XenParavirtOps
[http://wiki.xensource.com/xenwiki/XenParavirtOps]
If you're compiling 32b kernel, you need to first enable PAE support, before
you get the Xen options in menuconfig. Detailt in the URL above.
-- Pasi
> Thank you.
>
> Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
> Engineering)
>
> Technical Support Engineer
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Mobile: +65-96489798
> MSN: teoenming@hotmail.com
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 5551 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-22 13:36 Boris Derzhavets
@ 2009-07-22 13:59 ` Teo En Ming
0 siblings, 0 replies; 86+ messages in thread
From: Teo En Ming @ 2009-07-22 13:59 UTC (permalink / raw)
To: Boris Derzhavets, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 5206 bytes --]
Hi Boris,
I am aware that Intel Core 2 Duo support EM64T and most processor models
support VMX. I am running AMD Socket AM2 X2 processor myself at home and
using 64-bit Linux myself.
My colleague Danny is not aware of this and he downloaded and installed
32-bit OpenSUSE 11.1.
Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: enming.teo@asiasoftsea.net, xen-devel@lists.xensource.com
Date: Wed, 22 Jul 2009 06:36:52 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Actually, you seems to be the second person complaining this issue.
I would suggest 64-bit distro ( you are on Core2Duo) to build the most
recent Jeremy's kernel. Personally, i succeeded on F11 and Ubuntu 9.04
Server both x86_64.
You might also experience problem with building 2.6.30.X Xenified kernel
due to same 32-bit env. Workaround is well known, however it's pain again.
Boris.
P.S. Once again address PVOPS issues to Jeremy.
--- On Wed, 7/22/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
To: "Teo En Ming"
<enming.teo@asiasoftsea.net>, "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Date: Wednesday, July 22, 2009, 9:16 AM
Hi,
I used the rebase/master branch as suggested but I still don't see any
Xen related options. Please see screenshot.
http://i25.tinypic.com/15wxg0x.jpg
FYI I am using OpenSUSE 11.1 32-bit with Intel Core 2 Duo VMX processor
flag (hardware virtualization extensions).
Thank you.
Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Cc:
Date: Wed, 22 Jul 2009 21:00:52 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Thank you! I will go and check it out.
Another question: The latest stock kernel 2.6.30.2 from kernel.org is
paravirt-ops enabled (since 2.6.20) but it does not support Xen Dom 0? Only
Jeremy's pv_ops enable kernel support Xen Dom 0?
The other approach to use Xen is not to use pvops enabled kernel but
to apply patches to the stock kernel to Xenify it?
Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com, enming.teo@asiasoftsea.net
Cc: enming.teo@asiasoftsea.net
Date: Wed, 22 Jul 2009 05:57:10 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
If you
checked out :-
git checkout origin/xen-tip/next -b xen-tip/next
then try another branchgit checkout origin/rebase/master -b rebase/master
First one may be outdated in meantime.
Address it to Jeremy Fitzhardinge, for qualified respond.
Boris.
--- On Wed, 7/22/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: xen-devel@lists.xensource.com
Cc: enming.teo@asiasoftsea.net
Date: Wednesday, July 22, 2009, 8:36 AM
Hi All,
I followed the instructions here at
http://bderzhavets.wordpress.com/2009/06/10/setup-fedora-11-pv-domu-at-xen-3-4-1-dom0-kernel-2-6-30-rc6-tip-on-top-of-fedora-11/
However, when I do a "make menuconfig", I cannot see any
XEN related configuration options. What am I missing?
Thank you.
Mr. Teo En Ming Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 10037 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-22 13:31 ` Pasi Kärkkäinen
@ 2009-07-22 14:10 ` Teo En Ming
0 siblings, 0 replies; 86+ messages in thread
From: Teo En Ming @ 2009-07-22 14:10 UTC (permalink / raw)
To: Pasi Kärkkäinen, Boris Derzhavets; +Cc: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 1259 bytes --]
Hi Pasi
I can confirm that Jeremy's 2.6.31-rc3 kernel crashes upon startup. Halfway
through booting the Xen Dom 0 pvops kernel the computer reboots.
I will now switch back to the 2.6.30-rc3 branch.
Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Boris Derzhavets <bderzhavets@yahoo.com>
Cc: xen-devel@lists.xensource.com, enming.teo@asiasoftsea.net
Date: Wed, 22 Jul 2009 16:31:36 +0300
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Wed, Jul 22, 2009 at 05:57:10AM -0700, Boris Derzhavets wrote:
> If you checked out :-
>
> git checkout origin/xen-tip/next -b xen-tip/next
>
> then try another branch
>
> git checkout origin/rebase/master -b rebase/master
>
> First one may be outdated in meantime.
>
Btw rebase/master (2.6.31-rc3) doesn't work currently on 32b PAE. It'll
crash during startup.
xen-tip/next (2.6.30-rc6) works on 32b PAE.
-- Pasi
[-- Attachment #1.2: Type: text/html, Size: 1970 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-22 13:54 ` Teo En Ming
@ 2009-07-22 15:40 ` Teo En Ming
2009-07-22 15:47 ` Teo En Ming
0 siblings, 1 reply; 86+ messages in thread
From: Teo En Ming @ 2009-07-22 15:40 UTC (permalink / raw)
To: Teo En Ming, Pasi Kärkkäinen; +Cc: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 4808 bytes --]
haha stupid me...
I took the .config from the default opensuse 11.1 NON-xen kernel and tried
to use it for Jeremy's pvops kernel and tried to do a make oldconfig, then
no matter how i try, even if i enable >4GB memory addressing support and
enable PAE, the Xen options would not show up at all.
Now, I take the .config from the default opensuse 11.1 XENified kernel and
tried to do a make oldconfig with Jeremy's kernel, it works and now i am
able to enable PAE and Xen options also shows up as well. Now I am building
the new kernel. Hurray!!!
Think it's getting late in Singapore here right now. Too tired and not
thing. 11:49 PM Singapore time now.
Thank you Boris and Palis for help me!!!
Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: xen-devel@lists.xensource.com
Date: Wed, 22 Jul 2009 21:54:52 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Thank you!
I have enabled PAE support and the XEN Dom0 options show up.
However, when I tried to copy over the .config from the default
OpenSUSE 11.1 32-bit kernel (/boot directory), do a "make oldconfig" and
then a "make menuconfig", the Xen Dom0 options do not show up anymore even
though I have enabled PAE support. Any idea why this is so?
If I do a make oldconfig using Opensuse 11.1 default config, then a
make menuconfig and then Xen options do not show up, can I edit
linux-2.6-xen/.config directly using vi and then add the following Xen
configuration options manually?
CONFIG_XEN=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=32
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_PCI=y
CONFIG_PCI_XEN=y
CONFIG_XEN_BLKDEV_FRONTEND=m
CONFIG_NETXEN_NIC=m
CONFIG_XEN_NETDEV_FRONTEND=m
CONFIG_XEN_KBDDEV_FRONTEND=m
CONFIG_HVC_XEN=y
CONFIG_XEN_FBDEV_FRONTEND=m
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XEN_BACKEND=y
CONFIG_XEN_BLKDEV_BACKEND=y
CONFIG_XEN_NETDEV_BACKEND=y
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_XENBUS_FRONTEND=mThank you!
Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming <enming.teo@asiasoftsea.net>
Cc: xen-devel@lists.xensource.com
Date: Wed, 22 Jul 2009 16:30:12 +0300
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
On Wed, Jul 22,
2009 at 08:36:26PM +0800, Teo En Ming wrote:
> Hi All,
>
> I followed the instructions here at
>
http://bderzhavets.wordpress.com/2009/06/10/setup-fedora-11-pv-domu-at-xen-3-4-1-dom0-kernel-2-6-30-rc6-tip-on-top-of-fedora-11/
[http://bderzhavets.wordpress.com/2009/06/10/setup-fedora-11-pv-domu-at-xen-3-4-1-dom0-kernel-2-6-30-rc6-tip-on-top-of-fedora-11/]
>
> However, when I do a "make menuconfig", I cannot see any XEN
related
> configuration options. What am I missing?
>
http://wiki.xensource.com/xenwiki/XenParavirtOps
[http://wiki.xensource.com/xenwiki/XenParavirtOps]
If you're compiling 32b kernel, you need to first enable PAE
support, before
you get the Xen options in menuconfig. Detailt in the URL above.
-- Pasi
> Thank you.
>
> Mr. Teo En Ming Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical
> Engineering)
>
> Technical Support Engineer
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Mobile: +65-96489798
> MSN: teoenming@hotmail.com
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 7539 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-22 15:40 ` Teo En Ming
@ 2009-07-22 15:47 ` Teo En Ming
2009-07-22 16:04 ` Pasi Kärkkäinen
0 siblings, 1 reply; 86+ messages in thread
From: Teo En Ming @ 2009-07-22 15:47 UTC (permalink / raw)
To: Teo En Ming, Pasi Kärkkäinen; +Cc: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 116071 bytes --]
OOOPS! I still got an error compiling the kernel image. Please advise. See
console output below.
CC block/blk-integrity.o
LD block/built-in.o
CC drivers/acpi/tables.o
CC drivers/acpi/blacklist.o
CC drivers/acpi/osl.o
CC drivers/acpi/utils.o
CC drivers/acpi/reboot.o
CC drivers/acpi/wakeup.o
CC drivers/acpi/sleep.o
CC drivers/acpi/proc.o
CC drivers/acpi/bus.o
CC drivers/acpi/glue.o
CC drivers/acpi/scan.o
CC drivers/acpi/ec.o
CC drivers/acpi/dock.o
CC drivers/acpi/pci_root.o
CC drivers/acpi/pci_link.o
CC drivers/acpi/pci_irq.o
CC drivers/acpi/pci_bind.o
CC drivers/acpi/power.o
CC drivers/acpi/system.o
CC drivers/acpi/event.o
CC drivers/acpi/debug.o
CC drivers/acpi/cm_sbs.o
CC drivers/acpi/video_detect.o
LD drivers/acpi/acpi.o
CC drivers/acpi/acpica/dsfield.o
CC drivers/acpi/acpica/dsmthdat.o
CC drivers/acpi/acpica/dsopcode.o
CC drivers/acpi/acpica/dswexec.o
CC drivers/acpi/acpica/dswscope.o
CC drivers/acpi/acpica/dsmethod.o
CC drivers/acpi/acpica/dsobject.o
CC drivers/acpi/acpica/dsutils.o
CC drivers/acpi/acpica/dswload.o
CC drivers/acpi/acpica/dswstate.o
CC drivers/acpi/acpica/dsinit.o
CC drivers/acpi/acpica/evevent.o
CC drivers/acpi/acpica/evregion.o
CC drivers/acpi/acpica/evsci.o
CC drivers/acpi/acpica/evxfevnt.o
CC drivers/acpi/acpica/evmisc.o
CC drivers/acpi/acpica/evrgnini.o
CC drivers/acpi/acpica/evxface.o
CC drivers/acpi/acpica/evxfregn.o
CC drivers/acpi/acpica/evgpe.o
CC drivers/acpi/acpica/evgpeblk.o
CC drivers/acpi/acpica/exconfig.o
CC drivers/acpi/acpica/exfield.o
CC drivers/acpi/acpica/exnames.o
CC drivers/acpi/acpica/exoparg6.o
CC drivers/acpi/acpica/exresolv.o
CC drivers/acpi/acpica/exstorob.o
CC drivers/acpi/acpica/exconvrt.o
CC drivers/acpi/acpica/exfldio.o
CC drivers/acpi/acpica/exoparg1.o
CC drivers/acpi/acpica/exprep.o
CC drivers/acpi/acpica/exresop.o
CC drivers/acpi/acpica/exsystem.o
CC drivers/acpi/acpica/excreate.o
CC drivers/acpi/acpica/exmisc.o
CC drivers/acpi/acpica/exoparg2.o
CC drivers/acpi/acpica/exregion.o
CC drivers/acpi/acpica/exstore.o
CC drivers/acpi/acpica/exutils.o
CC drivers/acpi/acpica/exdump.o
CC drivers/acpi/acpica/exmutex.o
CC drivers/acpi/acpica/exoparg3.o
CC drivers/acpi/acpica/exresnte.o
CC drivers/acpi/acpica/exstoren.o
CC drivers/acpi/acpica/hwacpi.o
CC drivers/acpi/acpica/hwgpe.o
CC drivers/acpi/acpica/hwregs.o
CC drivers/acpi/acpica/hwsleep.o
CC drivers/acpi/acpica/hwxface.o
CC drivers/acpi/acpica/hwvalid.o
CC drivers/acpi/acpica/nsaccess.o
CC drivers/acpi/acpica/nsload.o
CC drivers/acpi/acpica/nssearch.o
CC drivers/acpi/acpica/nsxfeval.o
CC drivers/acpi/acpica/nsalloc.o
CC drivers/acpi/acpica/nseval.o
CC drivers/acpi/acpica/nsnames.o
CC drivers/acpi/acpica/nsutils.o
CC drivers/acpi/acpica/nsxfname.o
CC drivers/acpi/acpica/nsdump.o
CC drivers/acpi/acpica/nsinit.o
CC drivers/acpi/acpica/nsobject.o
CC drivers/acpi/acpica/nswalk.o
CC drivers/acpi/acpica/nsxfobj.o
CC drivers/acpi/acpica/nsparse.o
CC drivers/acpi/acpica/nspredef.o
CC drivers/acpi/acpica/psargs.o
CC drivers/acpi/acpica/psparse.o
CC drivers/acpi/acpica/psloop.o
CC drivers/acpi/acpica/pstree.o
CC drivers/acpi/acpica/pswalk.o
CC drivers/acpi/acpica/psopcode.o
CC drivers/acpi/acpica/psscope.o
CC drivers/acpi/acpica/psutils.o
CC drivers/acpi/acpica/psxface.o
CC drivers/acpi/acpica/rsaddr.o
CC drivers/acpi/acpica/rscreate.o
CC drivers/acpi/acpica/rsinfo.o
CC drivers/acpi/acpica/rsio.o
CC drivers/acpi/acpica/rslist.o
CC drivers/acpi/acpica/rsmisc.o
CC drivers/acpi/acpica/rsxface.o
CC drivers/acpi/acpica/rscalc.o
CC drivers/acpi/acpica/rsirq.o
CC drivers/acpi/acpica/rsmemory.o
CC drivers/acpi/acpica/rsutils.o
CC drivers/acpi/acpica/tbxface.o
CC drivers/acpi/acpica/tbinstal.o
CC drivers/acpi/acpica/tbutils.o
CC drivers/acpi/acpica/tbfind.o
CC drivers/acpi/acpica/tbfadt.o
drivers/acpi/acpica/tbfadt.c: In function ‘acpi_tb_create_local_fadt’:
/usr/src/linux-2.6-xen/arch/x86/include/asm/string_32.h:75: warning: array
subscript is above array bounds
CC drivers/acpi/acpica/tbxfroot.o
CC drivers/acpi/acpica/utalloc.o
CC drivers/acpi/acpica/utdebug.o
CC drivers/acpi/acpica/uteval.o
CC drivers/acpi/acpica/utinit.o
CC drivers/acpi/acpica/utmisc.o
CC drivers/acpi/acpica/utxface.o
CC drivers/acpi/acpica/utcopy.o
CC drivers/acpi/acpica/utdelete.o
CC drivers/acpi/acpica/utglobal.o
CC drivers/acpi/acpica/utmath.o
CC drivers/acpi/acpica/utobject.o
CC drivers/acpi/acpica/utstate.o
CC drivers/acpi/acpica/utmutex.o
CC drivers/acpi/acpica/utresrc.o
CC drivers/acpi/acpica/utlock.o
LD drivers/acpi/acpica/acpi.o
LD drivers/acpi/acpica/built-in.o
LD drivers/acpi/built-in.o
LD drivers/ata/built-in.o
LD drivers/atm/built-in.o
LD drivers/auxdisplay/built-in.o
CC drivers/base/core.o
CC drivers/base/sys.o
CC drivers/base/bus.o
CC drivers/base/dd.o
CC drivers/base/driver.o
CC drivers/base/class.o
CC drivers/base/platform.o
CC drivers/base/cpu.o
CC drivers/base/firmware.o
CC drivers/base/init.o
CC drivers/base/map.o
CC drivers/base/devres.o
CC drivers/base/attribute_container.o
CC drivers/base/transport_class.o
CC drivers/base/power/sysfs.o
CC drivers/base/power/main.o
LD drivers/base/power/built-in.o
CC drivers/base/dma-mapping.o
CC drivers/base/firmware_class.o
CC drivers/base/topology.o
CC drivers/base/module.o
CC drivers/base/hypervisor.o
LD drivers/base/built-in.o
CC drivers/block/xen-blkfront.o
LD drivers/block/built-in.o
LD drivers/block/aoe/built-in.o
LD drivers/block/paride/built-in.o
LD drivers/bluetooth/built-in.o
LD drivers/cdrom/built-in.o
CC drivers/char/mem.o
CC drivers/char/random.o
CC drivers/char/tty_io.o
CC drivers/char/n_tty.o
CC drivers/char/tty_ioctl.o
CC drivers/char/tty_ldisc.o
CC drivers/char/tty_buffer.o
CC drivers/char/tty_port.o
CC drivers/char/pty.o
CC drivers/char/misc.o
CC drivers/char/vt_ioctl.o
CC drivers/char/vc_screen.o
CC drivers/char/selection.o
CC drivers/char/keyboard.o
CC drivers/char/consolemap.o
CONMK drivers/char/consolemap_deftbl.c
CC drivers/char/consolemap_deftbl.o
CC drivers/char/vt.o
SHIPPED drivers/char/defkeymap.c
CC drivers/char/defkeymap.o
CC drivers/char/tty_audit.o
CC drivers/char/sysrq.o
CC drivers/char/hvc_console.o
CC drivers/char/hvc_irq.o
CC drivers/char/hvc_xen.o
LD drivers/char/agp/built-in.o
CC drivers/char/hw_random/core.o
LD drivers/char/hw_random/rng-core.o
LD drivers/char/hw_random/built-in.o
LD drivers/char/ip2/built-in.o
LD drivers/char/ipmi/built-in.o
LD drivers/char/mwave/built-in.o
LD drivers/char/pcmcia/ipwireless/built-in.o
LD drivers/char/pcmcia/built-in.o
LD drivers/char/rio/built-in.o
LD drivers/char/tpm/built-in.o
LD drivers/char/built-in.o
CC drivers/clocksource/acpi_pm.o
LD drivers/clocksource/built-in.o
CC drivers/connector/cn_queue.o
CC drivers/connector/connector.o
LD drivers/connector/cn.o
CC drivers/connector/cn_proc.o
LD drivers/connector/built-in.o
CC drivers/cpuidle/cpuidle.o
CC drivers/cpuidle/driver.o
CC drivers/cpuidle/governor.o
CC drivers/cpuidle/sysfs.o
CC drivers/cpuidle/governors/ladder.o
LD drivers/cpuidle/governors/built-in.o
LD drivers/cpuidle/built-in.o
LD drivers/crypto/built-in.o
CC drivers/edac/edac_stub.o
LD drivers/edac/built-in.o
CC drivers/firmware/dmi_scan.o
CC drivers/firmware/dmi-id.o
CC drivers/firmware/iscsi_ibft_find.o
CC drivers/firmware/memmap.o
LD drivers/firmware/built-in.o
CC drivers/gpio/gpiolib.o
LD drivers/gpio/built-in.o
LD drivers/gpu/drm/built-in.o
LD drivers/gpu/drm/i810/built-in.o
LD drivers/gpu/drm/i830/built-in.o
LD drivers/gpu/drm/i915/built-in.o
LD drivers/gpu/drm/mga/built-in.o
LD drivers/gpu/drm/r128/built-in.o
LD drivers/gpu/drm/radeon/built-in.o
LD drivers/gpu/drm/savage/built-in.o
LD drivers/gpu/drm/sis/built-in.o
LD drivers/gpu/drm/tdfx/built-in.o
LD drivers/gpu/drm/via/built-in.o
LD drivers/gpu/built-in.o
LD drivers/hid/built-in.o
LD drivers/hid/usbhid/built-in.o
LD drivers/hwmon/built-in.o
CC drivers/i2c/i2c-boardinfo.o
LD drivers/i2c/algos/built-in.o
LD drivers/i2c/busses/built-in.o
LD drivers/i2c/chips/built-in.o
LD drivers/i2c/built-in.o
LD drivers/ide/built-in.o
LD drivers/idle/built-in.o
CC drivers/ieee1394/init_ohci1394_dma.o
LD drivers/ieee1394/built-in.o
CC drivers/input/input.o
CC drivers/input/input-compat.o
CC drivers/input/ff-core.o
LD drivers/input/input-core.o
CC drivers/input/mousedev.o
CC drivers/input/evdev.o
LD drivers/input/joystick/built-in.o
LD drivers/input/joystick/iforce/built-in.o
CC drivers/input/keyboard/atkbd.o
LD drivers/input/keyboard/built-in.o
LD drivers/input/misc/built-in.o
CC drivers/input/mouse/psmouse-base.o
CC drivers/input/mouse/synaptics.o
CC drivers/input/mouse/alps.o
CC drivers/input/mouse/logips2pp.o
CC drivers/input/mouse/lifebook.o
CC drivers/input/mouse/trackpoint.o
LD drivers/input/mouse/psmouse.o
LD drivers/input/mouse/built-in.o
LD drivers/input/tablet/built-in.o
LD drivers/input/touchscreen/built-in.o
CC drivers/input/xen-kbdfront.o
drivers/input/xen-kbdfront.c: In function ‘xenkbd_backend_changed’:
drivers/input/xen-kbdfront.c:272: warning: enumeration value
‘XenbusStateReconfiguring’ not handled in switch
drivers/input/xen-kbdfront.c:272: warning: enumeration value
‘XenbusStateReconfigured’ not handled in switch
LD drivers/input/built-in.o
LD drivers/input/gameport/built-in.o
CC drivers/input/serio/serio.o
CC drivers/input/serio/i8042.o
CC drivers/input/serio/libps2.o
LD drivers/input/serio/built-in.o
LD drivers/isdn/capi/built-in.o
LD drivers/isdn/divert/built-in.o
LD drivers/isdn/gigaset/built-in.o
LD drivers/isdn/hardware/avm/built-in.o
LD drivers/isdn/hardware/eicon/built-in.o
LD drivers/isdn/hardware/built-in.o
LD drivers/isdn/hisax/built-in.o
LD drivers/isdn/hysdn/built-in.o
LD drivers/isdn/i4l/built-in.o
LD drivers/isdn/built-in.o
CC drivers/leds/led-core.o
CC drivers/leds/led-triggers.o
CC drivers/leds/ledtrig-ide-disk.o
LD drivers/leds/built-in.o
LD drivers/lguest/built-in.o
LD drivers/macintosh/built-in.o
CC drivers/md/md.o
CC drivers/md/bitmap.o
LD drivers/md/md-mod.o
LD drivers/md/built-in.o
LD drivers/media/common/tuners/built-in.o
LD drivers/media/common/built-in.o
LD drivers/media/dvb/b2c2/built-in.o
LD drivers/media/dvb/bt8xx/built-in.o
LD drivers/media/dvb/dm1105/built-in.o
LD drivers/media/dvb/dvb-core/built-in.o
LD drivers/media/dvb/dvb-usb/built-in.o
LD drivers/media/dvb/frontends/built-in.o
LD drivers/media/dvb/pluto2/built-in.o
LD drivers/media/dvb/siano/built-in.o
LD drivers/media/dvb/ttpci/built-in.o
LD drivers/media/dvb/ttusb-budget/built-in.o
LD drivers/media/dvb/ttusb-dec/built-in.o
LD drivers/media/dvb/built-in.o
LD drivers/media/radio/built-in.o
LD drivers/media/video/built-in.o
LD drivers/media/video/bt8xx/built-in.o
LD drivers/media/video/cpia2/built-in.o
LD drivers/media/video/cx18/built-in.o
LD drivers/media/video/cx23885/built-in.o
LD drivers/media/video/cx25840/built-in.o
LD drivers/media/video/em28xx/built-in.o
LD drivers/media/video/et61x251/built-in.o
LD drivers/media/video/gspca/built-in.o
LD drivers/media/video/ivtv/built-in.o
LD drivers/media/video/ovcamchip/built-in.o
LD drivers/media/video/pvrusb2/built-in.o
LD drivers/media/video/pwc/built-in.o
LD drivers/media/video/saa7134/built-in.o
LD drivers/media/video/sn9c102/built-in.o
LD drivers/media/video/usbvideo/built-in.o
LD drivers/media/video/usbvision/built-in.o
LD drivers/media/video/uvc/built-in.o
LD drivers/media/video/zc0301/built-in.o
LD drivers/media/video/zoran/built-in.o
LD drivers/media/built-in.o
LD drivers/memstick/core/built-in.o
LD drivers/memstick/host/built-in.o
LD drivers/message/fusion/built-in.o
LD drivers/message/i2o/built-in.o
LD drivers/message/built-in.o
LD drivers/mfd/built-in.o
LD drivers/misc/eeprom/built-in.o
LD drivers/misc/ibmasm/built-in.o
LD drivers/misc/built-in.o
LD drivers/mmc/card/built-in.o
LD drivers/mmc/core/built-in.o
LD drivers/mmc/host/built-in.o
LD drivers/mtd/chips/built-in.o
LD drivers/mtd/devices/built-in.o
LD drivers/mtd/lpddr/built-in.o
LD drivers/mtd/maps/built-in.o
LD drivers/mtd/nand/built-in.o
LD drivers/mtd/onenand/built-in.o
LD drivers/mtd/tests/built-in.o
LD drivers/mtd/ubi/built-in.o
LD drivers/mtd/built-in.o
CC drivers/net/Space.o
CC drivers/net/loopback.o
CC drivers/net/xen-netfront.o
LD drivers/net/appletalk/built-in.o
LD drivers/net/arcnet/built-in.o
LD drivers/net/atl1e/built-in.o
LD drivers/net/atlx/built-in.o
LD drivers/net/bonding/built-in.o
LD drivers/net/can/built-in.o
LD drivers/net/chelsio/built-in.o
LD drivers/net/cxgb3/built-in.o
LD drivers/net/e1000/built-in.o
LD drivers/net/e1000e/built-in.o
LD drivers/net/hamradio/built-in.o
LD drivers/net/igb/built-in.o
LD drivers/net/irda/built-in.o
LD drivers/net/ixgb/built-in.o
LD drivers/net/ixgbe/built-in.o
LD drivers/net/myri10ge/built-in.o
LD drivers/net/pcmcia/built-in.o
LD drivers/net/phy/built-in.o
LD drivers/net/sfc/built-in.o
LD drivers/net/skfp/built-in.o
LD drivers/net/tokenring/built-in.o
LD drivers/net/tulip/built-in.o
LD drivers/net/usb/built-in.o
LD drivers/net/wan/built-in.o
LD drivers/net/wan/lmc/built-in.o
LD drivers/net/wireless/built-in.o
LD drivers/net/wireless/ath5k/built-in.o
LD drivers/net/wireless/ath9k/built-in.o
LD drivers/net/wireless/b43/built-in.o
LD drivers/net/wireless/b43legacy/built-in.o
LD drivers/net/wireless/hostap/built-in.o
LD drivers/net/wireless/ipw2x00/built-in.o
LD drivers/net/wireless/iwlwifi/built-in.o
LD drivers/net/wireless/libertas/built-in.o
LD drivers/net/wireless/orinoco/built-in.o
LD drivers/net/wireless/p54/built-in.o
LD drivers/net/wireless/prism54/built-in.o
LD drivers/net/wireless/rtl818x/built-in.o
LD drivers/net/wireless/zd1211rw/built-in.o
LD drivers/net/built-in.o
LD drivers/parport/built-in.o
CC drivers/pci/access.o
CC drivers/pci/bus.o
CC drivers/pci/probe.o
CC drivers/pci/remove.o
CC drivers/pci/pci.o
CC drivers/pci/quirks.o
CC drivers/pci/slot.o
CC drivers/pci/pci-driver.o
CC drivers/pci/search.o
drivers/pci/search.c:145: warning: ‘pci_find_slot’ is deprecated
(declared at drivers/pci/search.c:134)
drivers/pci/search.c:145: warning: ‘pci_find_slot’ is deprecated
(declared at drivers/pci/search.c:134)
drivers/pci/search.c:174: warning: ‘pci_find_device’ is deprecated
(declared at drivers/pci/search.c:166)
drivers/pci/search.c:174: warning: ‘pci_find_device’ is deprecated
(declared at drivers/pci/search.c:166)
CC drivers/pci/pci-sysfs.o
CC drivers/pci/rom.o
CC drivers/pci/setup-res.o
CC drivers/pci/irq.o
CC drivers/pci/proc.o
LD drivers/pci/hotplug/built-in.o
CC drivers/pci/pcie/aspm.o
CC drivers/pci/pcie/portdrv_core.o
CC drivers/pci/pcie/portdrv_pci.o
CC drivers/pci/pcie/portdrv_bus.o
LD drivers/pci/pcie/pcieportdrv.o
CC drivers/pci/pcie/aer/aerdrv_errprint.o
CC drivers/pci/pcie/aer/aerdrv_core.o
CC drivers/pci/pcie/aer/aerdrv.o
CC drivers/pci/pcie/aer/aerdrv_acpi.o
LD drivers/pci/pcie/aer/aerdriver.o
LD drivers/pci/pcie/aer/built-in.o
LD drivers/pci/pcie/built-in.o
CC drivers/pci/hotplug.o
CC drivers/pci/hotplug-pci.o
CC drivers/pci/msi.o
CC drivers/pci/htirq.o
CC drivers/pci/xen-iommu.o
CC drivers/pci/setup-bus.o
CC drivers/pci/pci-acpi.o
LD drivers/pci/built-in.o
LD drivers/pcmcia/built-in.o
LD drivers/platform/x86/built-in.o
LD drivers/platform/built-in.o
CC drivers/pnp/core.o
CC drivers/pnp/card.o
CC drivers/pnp/driver.o
CC drivers/pnp/resource.o
CC drivers/pnp/manager.o
CC drivers/pnp/support.o
CC drivers/pnp/interface.o
CC drivers/pnp/quirks.o
CC drivers/pnp/pnpacpi/core.o
CC drivers/pnp/pnpacpi/rsparser.o
LD drivers/pnp/pnpacpi/built-in.o
CC drivers/pnp/system.o
LD drivers/pnp/built-in.o
CC drivers/power/power_supply_core.o
CC drivers/power/power_supply_sysfs.o
CC drivers/power/power_supply_leds.o
LD drivers/power/power_supply.o
LD drivers/power/built-in.o
LD drivers/rtc/built-in.o
LD drivers/scsi/aacraid/built-in.o
LD drivers/scsi/aic7xxx/built-in.o
LD drivers/scsi/aic94xx/built-in.o
LD drivers/scsi/arcmsr/built-in.o
LD drivers/scsi/cxgb3i/built-in.o
LD drivers/scsi/device_handler/built-in.o
LD drivers/scsi/fcoe/built-in.o
LD drivers/scsi/libfc/built-in.o
LD drivers/scsi/libsas/built-in.o
LD drivers/scsi/lpfc/built-in.o
LD drivers/scsi/megaraid/built-in.o
LD drivers/scsi/pcmcia/built-in.o
LD drivers/scsi/qla2xxx/built-in.o
LD drivers/scsi/qla4xxx/built-in.o
LD drivers/scsi/sym53c8xx_2/built-in.o
LD drivers/scsi/built-in.o
LD drivers/serial/built-in.o
LD drivers/serial/jsm/built-in.o
CC drivers/spi/spi.o
LD drivers/spi/built-in.o
LD drivers/ssb/built-in.o
CC drivers/staging/staging.o
LD drivers/staging/built-in.o
LD drivers/telephony/built-in.o
LD drivers/thermal/built-in.o
LD drivers/uio/built-in.o
LD drivers/usb/atm/built-in.o
LD drivers/usb/c67x00/built-in.o
LD drivers/usb/class/built-in.o
LD drivers/usb/core/built-in.o
CC drivers/usb/host/pci-quirks.o
LD drivers/usb/host/built-in.o
LD drivers/usb/image/built-in.o
LD drivers/usb/misc/built-in.o
LD drivers/usb/misc/sisusbvga/built-in.o
LD drivers/usb/mon/built-in.o
LD drivers/usb/serial/built-in.o
LD drivers/usb/storage/built-in.o
LD drivers/usb/built-in.o
CC drivers/video/fb_notify.o
CC drivers/video/fbmem.o
CC drivers/video/fbmon.o
CC drivers/video/fbcmap.o
CC drivers/video/fbsysfs.o
CC drivers/video/modedb.o
CC drivers/video/fbcvt.o
LD drivers/video/fb.o
LD drivers/video/aty/built-in.o
CC drivers/video/backlight/backlight.o
CC drivers/video/backlight/generic_bl.o
LD drivers/video/backlight/built-in.o
CC drivers/video/console/dummycon.o
CC drivers/video/console/vgacon.o
CC drivers/video/console/fbcon.o
CC drivers/video/console/bitblit.o
CC drivers/video/console/fonts.o
CC drivers/video/console/font_8x8.o
CC drivers/video/console/font_8x16.o
LD drivers/video/console/font.o
CC drivers/video/console/softcursor.o
CC drivers/video/console/tileblit.o
CC drivers/video/console/fbcon_rotate.o
CC drivers/video/console/fbcon_cw.o
CC drivers/video/console/fbcon_ud.o
CC drivers/video/console/fbcon_ccw.o
LD drivers/video/console/built-in.o
LD drivers/video/display/built-in.o
LD drivers/video/geode/built-in.o
LD drivers/video/kyro/built-in.o
LD drivers/video/matrox/built-in.o
LD drivers/video/nvidia/built-in.o
LD drivers/video/riva/built-in.o
LD drivers/video/savage/built-in.o
LD drivers/video/sis/built-in.o
LD drivers/video/vermilion/built-in.o
CC drivers/video/cfbfillrect.o
CC drivers/video/cfbcopyarea.o
CC drivers/video/cfbimgblt.o
CC drivers/video/sysfillrect.o
CC drivers/video/syscopyarea.o
CC drivers/video/sysimgblt.o
CC drivers/video/fb_sys_fops.o
CC drivers/video/fb_defio.o
CC drivers/video/imsttfb.o
CC drivers/video/xen-fbfront.o
drivers/video/xen-fbfront.c: In function ‘xenfb_backend_changed’:
drivers/video/xen-fbfront.c:627: warning: enumeration value
‘XenbusStateReconfiguring’ not handled in switch
drivers/video/xen-fbfront.c:627: warning: enumeration value
‘XenbusStateReconfigured’ not handled in switch
CC drivers/video/vesafb.o
LD drivers/video/built-in.o
LD drivers/video/i810/built-in.o
LD drivers/video/intelfb/built-in.o
LD drivers/w1/masters/built-in.o
LD drivers/w1/slaves/built-in.o
LD drivers/w1/built-in.o
LD drivers/watchdog/built-in.o
CC drivers/xen/grant-table.o
CC drivers/xen/features.o
CC drivers/xen/events.o
CC drivers/xen/manage.o
CC drivers/xen/biomerge.o
CC drivers/xen/blkback/blkback.o
CC drivers/xen/blkback/xenbus.o
CC drivers/xen/blkback/interface.o
CC drivers/xen/blkback/vbd.o
LD drivers/xen/blkback/blkbk.o
LD drivers/xen/blkback/built-in.o
CC drivers/xen/netback/netback.o
CC drivers/xen/netback/xenbus.o
CC drivers/xen/netback/interface.o
LD drivers/xen/netback/netbk.o
LD drivers/xen/netback/built-in.o
CC drivers/xen/xenbus/xenbus_client.o
CC drivers/xen/xenbus/xenbus_comms.o
CC drivers/xen/xenbus/xenbus_xs.o
CC drivers/xen/xenbus/xenbus_probe.o
CC drivers/xen/xenbus/xenbus_probe_backend.o
LD drivers/xen/xenbus/xenbus.o
CC drivers/xen/xenbus/xenbus_probe_frontend.o
LD drivers/xen/xenbus/built-in.o
CC drivers/xen/xenfs/super.o
CC drivers/xen/xenfs/xenbus.o
CC drivers/xen/xenfs/xenstored.o
CC drivers/xen/xenfs/privcmd.o
LD drivers/xen/xenfs/xenfs.o
LD drivers/xen/xenfs/built-in.o
CC drivers/xen/cpu_hotplug.o
CC drivers/xen/balloon.o
CC drivers/xen/evtchn.o
CC drivers/xen/gntdev.o
CC drivers/xen/sys-hypervisor.o
LD drivers/xen/built-in.o
LD drivers/built-in.o
LD sound/built-in.o
LD sound/arm/built-in.o
LD sound/atmel/built-in.o
LD sound/core/oss/built-in.o
LD sound/core/seq/built-in.o
LD sound/core/seq/oss/built-in.o
LD sound/core/built-in.o
LD sound/drivers/built-in.o
LD sound/drivers/mpu401/built-in.o
LD sound/drivers/opl3/built-in.o
LD sound/drivers/opl4/built-in.o
LD sound/drivers/pcsp/built-in.o
LD sound/drivers/vx/built-in.o
LD sound/i2c/built-in.o
LD sound/i2c/other/built-in.o
LD sound/isa/built-in.o
LD sound/isa/ad1816a/built-in.o
LD sound/isa/ad1848/built-in.o
LD sound/isa/cs423x/built-in.o
LD sound/isa/es1688/built-in.o
LD sound/isa/gus/built-in.o
LD sound/isa/msnd/built-in.o
LD sound/isa/opti9xx/built-in.o
LD sound/isa/sb/built-in.o
LD sound/isa/wavefront/built-in.o
LD sound/isa/wss/built-in.o
LD sound/mips/built-in.o
LD sound/oss/built-in.o
LD sound/parisc/built-in.o
LD sound/pci/built-in.o
LD sound/pci/ac97/built-in.o
LD sound/pci/ali5451/built-in.o
LD sound/pci/au88x0/built-in.o
LD sound/pci/aw2/built-in.o
LD sound/pci/ca0106/built-in.o
LD sound/pci/cs46xx/built-in.o
LD sound/pci/cs5535audio/built-in.o
LD sound/pci/echoaudio/built-in.o
LD sound/pci/emu10k1/built-in.o
LD sound/pci/hda/built-in.o
LD sound/pci/ice1712/built-in.o
LD sound/pci/korg1212/built-in.o
LD sound/pci/mixart/built-in.o
LD sound/pci/nm256/built-in.o
LD sound/pci/oxygen/built-in.o
LD sound/pci/pcxhr/built-in.o
LD sound/pci/riptide/built-in.o
LD sound/pci/rme9652/built-in.o
LD sound/pci/trident/built-in.o
LD sound/pci/vx222/built-in.o
LD sound/pci/ymfpci/built-in.o
LD sound/pcmcia/pdaudiocf/built-in.o
LD sound/pcmcia/vx/built-in.o
LD sound/ppc/built-in.o
LD sound/sh/built-in.o
LD sound/soc/built-in.o
LD sound/sparc/built-in.o
LD sound/spi/built-in.o
LD sound/synth/built-in.o
LD sound/synth/emux/built-in.o
LD sound/usb/built-in.o
LD sound/usb/caiaq/built-in.o
LD sound/usb/usx2y/built-in.o
MK_FW firmware/keyspan/mpr.fw.gen.S
HOSTCC firmware/ihex2fw
IHEX2FW firmware/keyspan/mpr.fw
AS firmware/keyspan/mpr.fw.gen.o
MK_FW firmware/keyspan/usa18x.fw.gen.S
IHEX2FW firmware/keyspan/usa18x.fw
AS firmware/keyspan/usa18x.fw.gen.o
MK_FW firmware/keyspan/usa19.fw.gen.S
IHEX2FW firmware/keyspan/usa19.fw
AS firmware/keyspan/usa19.fw.gen.o
MK_FW firmware/keyspan/usa19qi.fw.gen.S
IHEX2FW firmware/keyspan/usa19qi.fw
AS firmware/keyspan/usa19qi.fw.gen.o
MK_FW firmware/keyspan/usa19qw.fw.gen.S
IHEX2FW firmware/keyspan/usa19qw.fw
AS firmware/keyspan/usa19qw.fw.gen.o
MK_FW firmware/keyspan/usa19w.fw.gen.S
IHEX2FW firmware/keyspan/usa19w.fw
AS firmware/keyspan/usa19w.fw.gen.o
MK_FW firmware/keyspan/usa28.fw.gen.S
IHEX2FW firmware/keyspan/usa28.fw
AS firmware/keyspan/usa28.fw.gen.o
MK_FW firmware/keyspan/usa28xa.fw.gen.S
IHEX2FW firmware/keyspan/usa28xa.fw
AS firmware/keyspan/usa28xa.fw.gen.o
MK_FW firmware/keyspan/usa28xb.fw.gen.S
IHEX2FW firmware/keyspan/usa28xb.fw
AS firmware/keyspan/usa28xb.fw.gen.o
MK_FW firmware/keyspan/usa28x.fw.gen.S
IHEX2FW firmware/keyspan/usa28x.fw
AS firmware/keyspan/usa28x.fw.gen.o
MK_FW firmware/keyspan/usa49w.fw.gen.S
IHEX2FW firmware/keyspan/usa49w.fw
AS firmware/keyspan/usa49w.fw.gen.o
MK_FW firmware/keyspan/usa49wlc.fw.gen.S
IHEX2FW firmware/keyspan/usa49wlc.fw
AS firmware/keyspan/usa49wlc.fw.gen.o
LD firmware/built-in.o
CC arch/x86/pci/i386.o
CC arch/x86/pci/init.o
CC arch/x86/pci/pcbios.o
CC arch/x86/pci/mmconfig_32.o
CC arch/x86/pci/direct.o
CC arch/x86/pci/mmconfig-shared.o
CC arch/x86/pci/olpc.o
CC arch/x86/pci/xen.o
CC arch/x86/pci/xen/pci_op.o
CC arch/x86/pci/xen/xenbus.o
CC arch/x86/pci/xen/pci.o
LD arch/x86/pci/xen/pcifront.o
LD arch/x86/pci/xen/built-in.o
CC arch/x86/pci/fixup.o
CC arch/x86/pci/acpi.o
CC arch/x86/pci/legacy.o
CC arch/x86/pci/irq.o
CC arch/x86/pci/common.o
CC arch/x86/pci/early.o
CC arch/x86/pci/amd_bus.o
LD arch/x86/pci/built-in.o
CC arch/x86/power/cpu_32.o
LD arch/x86/power/built-in.o
CC arch/x86/video/fbdev.o
LD arch/x86/video/built-in.o
LD arch/x86/oprofile/built-in.o
CC net/socket.o
CC net/802/p8022.o
CC net/802/psnap.o
CC net/802/tr.o
CC net/802/fc.o
CC net/802/fddi.o
CC net/802/hippi.o
LD net/802/built-in.o
CC net/8021q/vlan_core.o
LD net/8021q/built-in.o
LD net/appletalk/built-in.o
LD net/atm/built-in.o
LD net/ax25/built-in.o
LD net/bluetooth/built-in.o
LD net/bluetooth/bnep/built-in.o
LD net/bluetooth/cmtp/built-in.o
LD net/bluetooth/hidp/built-in.o
LD net/bluetooth/rfcomm/built-in.o
LD net/bridge/built-in.o
LD net/bridge/netfilter/built-in.o
LD net/can/built-in.o
CC net/core/sock.o
CC net/core/request_sock.o
CC net/core/skbuff.o
CC net/core/iovec.o
CC net/core/datagram.o
CC net/core/stream.o
CC net/core/scm.o
CC net/core/gen_stats.o
CC net/core/gen_estimator.o
CC net/core/net_namespace.o
CC net/core/sysctl_net_core.o
CC net/core/skb_dma_map.o
CC net/core/dev.o
CC net/core/ethtool.o
CC net/core/dev_mcast.o
CC net/core/dst.o
CC net/core/netevent.o
CC net/core/neighbour.o
CC net/core/rtnetlink.o
CC net/core/utils.o
CC net/core/link_watch.o
CC net/core/filter.o
CC net/core/flow.o
CC net/core/net-sysfs.o
CC net/core/netpoll.o
CC net/core/fib_rules.o
CC net/core/net-traces.o
LD net/core/built-in.o
LD net/dccp/built-in.o
LD net/decnet/netfilter/built-in.o
LD net/decnet/built-in.o
LD net/econet/built-in.o
CC net/ethernet/eth.o
CC net/ethernet/pe2.o
LD net/ethernet/built-in.o
CC net/ipv4/route.o
CC net/ipv4/inetpeer.o
CC net/ipv4/protocol.o
CC net/ipv4/ip_input.o
CC net/ipv4/ip_fragment.o
CC net/ipv4/ip_forward.o
CC net/ipv4/ip_options.o
CC net/ipv4/ip_output.o
CC net/ipv4/ip_sockglue.o
CC net/ipv4/inet_hashtables.o
CC net/ipv4/inet_timewait_sock.o
CC net/ipv4/inet_connection_sock.o
CC net/ipv4/tcp.o
CC net/ipv4/tcp_input.o
CC net/ipv4/tcp_output.o
CC net/ipv4/tcp_timer.o
CC net/ipv4/tcp_ipv4.o
CC net/ipv4/tcp_minisocks.o
CC net/ipv4/tcp_cong.o
CC net/ipv4/datagram.o
CC net/ipv4/raw.o
CC net/ipv4/udp.o
CC net/ipv4/udplite.o
CC net/ipv4/arp.o
CC net/ipv4/icmp.o
CC net/ipv4/devinet.o
CC net/ipv4/af_inet.o
CC net/ipv4/igmp.o
CC net/ipv4/fib_frontend.o
CC net/ipv4/fib_semantics.o
CC net/ipv4/inet_fragment.o
CC net/ipv4/sysctl_net_ipv4.o
CC net/ipv4/fib_hash.o
CC net/ipv4/proc.o
CC net/ipv4/fib_rules.o
CC net/ipv4/ipmr.o
CC net/ipv4/syncookies.o
CC net/ipv4/inet_lro.o
CC net/ipv4/netfilter.o
LD net/ipv4/netfilter/built-in.o
CC net/ipv4/tcp_cubic.o
CC net/ipv4/xfrm4_policy.o
CC net/ipv4/xfrm4_state.o
CC net/ipv4/xfrm4_input.o
CC net/ipv4/xfrm4_output.o
LD net/ipv4/built-in.o
LD net/ipv6/netfilter/built-in.o
CC net/ipv6/addrconf_core.o
CC net/ipv6/exthdrs_core.o
CC net/ipv6/inet6_hashtables.o
LD net/ipv6/built-in.o
LD net/ipx/built-in.o
LD net/irda/built-in.o
LD net/irda/ircomm/built-in.o
LD net/irda/irlan/built-in.o
LD net/irda/irnet/built-in.o
LD net/key/built-in.o
LD net/lapb/built-in.o
CC net/llc/llc_core.o
CC net/llc/llc_input.o
CC net/llc/llc_output.o
LD net/llc/llc.o
LD net/llc/built-in.o
LD net/mac80211/built-in.o
CC net/netfilter/core.o
CC net/netfilter/nf_log.o
CC net/netfilter/nf_queue.o
CC net/netfilter/nf_sockopt.o
LD net/netfilter/netfilter.o
LD net/netfilter/built-in.o
LD net/netfilter/ipvs/built-in.o
CC net/netlink/af_netlink.o
CC net/netlink/genetlink.o
LD net/netlink/built-in.o
LD net/netrom/built-in.o
LD net/packet/built-in.o
LD net/rfkill/built-in.o
LD net/rose/built-in.o
LD net/rxrpc/built-in.o
CC net/sched/sch_generic.o
CC net/sched/sch_api.o
CC net/sched/sch_blackhole.o
CC net/sched/cls_api.o
CC net/sched/act_api.o
CC net/sched/sch_fifo.o
LD net/sched/built-in.o
LD net/sctp/built-in.o
LD net/sunrpc/built-in.o
LD net/sunrpc/auth_gss/built-in.o
CC net/unix/af_unix.o
CC net/unix/garbage.o
CC net/unix/sysctl_net_unix.o
LD net/unix/unix.o
LD net/unix/built-in.o
LD net/wanrouter/built-in.o
CC net/wireless/wext.o
LD net/wireless/built-in.o
LD net/x25/built-in.o
CC net/xfrm/xfrm_policy.o
CC net/xfrm/xfrm_state.o
CC net/xfrm/xfrm_hash.o
CC net/xfrm/xfrm_input.o
CC net/xfrm/xfrm_output.o
CC net/xfrm/xfrm_algo.o
CC net/xfrm/xfrm_sysctl.o
LD net/xfrm/built-in.o
CC net/sysctl_net.o
LD net/built-in.o
CC lib/bcd.o
CC lib/div64.o
CC lib/sort.o
CC lib/parser.o
CC lib/halfmd4.o
CC lib/debug_locks.o
CC lib/random32.o
CC lib/bust_spinlocks.o
CC lib/hexdump.o
CC lib/kasprintf.o
CC lib/bitmap.o
CC lib/scatterlist.o
CC lib/string_helpers.o
CC lib/iomap.o
CC lib/iomap_copy.o
CC lib/devres.o
CC lib/check_signature.o
CC lib/find_last_bit.o
CC lib/hweight.o
CC lib/kernel_lock.o
CC lib/bitrev.o
HOSTCC lib/gen_crc32table
GEN lib/crc32table.h
CC lib/crc32.o
LD lib/lzo/built-in.o
LD lib/reed_solomon/built-in.o
LD lib/zlib_deflate/built-in.o
CC lib/zlib_inflate/inffast.o
CC lib/zlib_inflate/inflate.o
CC lib/zlib_inflate/infutil.o
CC lib/zlib_inflate/inftrees.o
CC lib/zlib_inflate/inflate_syms.o
LD lib/zlib_inflate/zlib_inflate.o
LD lib/zlib_inflate/built-in.o
CC lib/textsearch.o
CC lib/percpu_counter.o
CC lib/audit.o
CC lib/swiotlb.o
CC lib/iommu-helper.o
CC lib/syscall.o
CC lib/nlattr.o
LD lib/built-in.o
CC lib/argv_split.o
CC lib/bug.o
CC lib/cmdline.o
CC lib/cpumask.o
CC lib/ctype.o
CC lib/dec_and_lock.o
CC lib/decompress.o
CC lib/decompress_bunzip2.o
CC lib/decompress_inflate.o
CC lib/decompress_unlzma.o
CC lib/dump_stack.o
CC lib/extable.o
CC lib/find_next_bit.o
CC lib/idr.o
CC lib/int_sqrt.o
CC lib/ioremap.o
CC lib/irq_regs.o
CC lib/is_single_threaded.o
CC lib/klist.o
CC lib/kobject.o
CC lib/kobject_uevent.o
CC lib/kref.o
CC lib/plist.o
CC lib/prio_heap.o
CC lib/prio_tree.o
CC lib/proportions.o
CC lib/radix-tree.o
CC lib/ratelimit.o
CC lib/rbtree.o
CC lib/reciprocal_div.o
CC lib/rwsem.o
CC lib/sha1.o
CC lib/show_mem.o
CC lib/string.o
CC lib/vsprintf.o
AR lib/lib.a
CC arch/x86/lib/msr-on-cpu.o
LD arch/x86/lib/built-in.o
AS arch/x86/lib/checksum_32.o
CC arch/x86/lib/delay.o
AS arch/x86/lib/getuser.o
CC arch/x86/lib/memcpy_32.o
AS arch/x86/lib/putuser.o
AS arch/x86/lib/semaphore_32.o
CC arch/x86/lib/string_32.o
CC arch/x86/lib/strstr_32.o
AS arch/x86/lib/thunk_32.o
CC arch/x86/lib/usercopy_32.o
AR arch/x86/lib/lib.a
LD vmlinux.o
MODPOST vmlinux.o
WARNING: modpost: Found 2 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
GEN .version
CHK include/linux/compile.h
UPD include/linux/compile.h
CC init/version.o
LD init/built-in.o
LD .tmp_vmlinux1
KSYM .tmp_kallsyms1.S
AS .tmp_kallsyms1.o
LD .tmp_vmlinux2
KSYM .tmp_kallsyms2.S
AS .tmp_kallsyms2.o
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
CC arch/x86/boot/a20.o
AS arch/x86/boot/bioscall.o
CC arch/x86/boot/cmdline.o
AS arch/x86/boot/copy.o
HOSTCC arch/x86/boot/mkcpustr
CPUSTR arch/x86/boot/cpustr.h
CC arch/x86/boot/cpu.o
CC arch/x86/boot/cpucheck.o
CC arch/x86/boot/edd.o
VOFFSET arch/x86/boot/voffset.h
LDS arch/x86/boot/compressed/vmlinux.lds
AS arch/x86/boot/compressed/head_32.o
CC arch/x86/boot/compressed/misc.o
OBJCOPY arch/x86/boot/compressed/vmlinux.bin
HOSTCC arch/x86/boot/compressed/relocs
RELOCS arch/x86/boot/compressed/vmlinux.relocs
BZIP2 arch/x86/boot/compressed/vmlinux.bin.bz2
HOSTCC arch/x86/boot/compressed/mkpiggy
MKPIGGY arch/x86/boot/compressed/piggy.S
AS arch/x86/boot/compressed/piggy.o
LD arch/x86/boot/compressed/vmlinux
ZOFFSET arch/x86/boot/zoffset.h
AS arch/x86/boot/header.o
arch/x86/boot/header.S: Assembler messages:
arch/x86/boot/header.S:236: Error: undefined symbol `ZO_startup_32' in
operation
make[1]: *** [arch/x86/boot/header.o] Error 1
make: *** [bzImage] Error 2
linux-2785:/usr/src/linux-2.6-xen # grep -i xen .config
# Linux kernel version: 2.6.30-xen3.4.1rc8-enming.teo
CONFIG_LOCALVERSION="-0.1-xen"
CONFIG_XEN=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=32
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DEBUG_FS=y
CONFIG_XEN_PCI_PASSTHROUGH=y
CONFIG_XEN_DOM0_PCI=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
# CONFIG_XEN_PCI_PASSTHROUGH_DEBUG is not set
CONFIG_MICROCODE_XEN=y
CONFIG_PCI_XEN=y
CONFIG_XEN_BLKDEV_FRONTEND=y
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_XEN_KBDDEV_FRONTEND=y
CONFIG_HVC_XEN=y
CONFIG_XEN_FBDEV_FRONTEND=y
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XEN_BACKEND=y
CONFIG_XEN_BLKDEV_BACKEND=y
CONFIG_XEN_NETDEV_BACKEND=y
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Teo En Ming" <enming.teo@asiasoftsea.net>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: xen-devel@lists.xensource.com
Date: Wed, 22 Jul 2009 23:40:46 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
haha stupid me...
I took the .config from the default opensuse 11.1 NON-xen kernel and
tried to use it for Jeremy's pvops kernel and tried to do a make oldconfig,
then no matter how i try, even if i enable >4GB memory addressing support
and enable PAE, the Xen options would not show up at all.
Now, I take the .config from the default opensuse 11.1 XENified kernel
and tried to do a make oldconfig with Jeremy's kernel, it works and now i am
able to enable PAE and Xen options also shows up as well. Now I am building
the new kernel. Hurray!!!
Think it's getting late in Singapore here right now. Too tired and not
thinking. 11:49 PM Singapore time now.
Thank you Boris and Palis for helping me out!!!
Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: xen-devel@lists.xensource.com
Date: Wed, 22 Jul 2009 21:54:52 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Thank you!
I have enabled PAE support and the XEN Dom0 options show up.
However, when I tried to copy over the .config from the default
OpenSUSE 11.1 32-bit kernel (/boot directory), do a "make oldconfig" and
then a "make menuconfig", the Xen Dom0 options do not show up anymore even
though I have enabled PAE support. Any idea why this is so?
If I do a make oldconfig using Opensuse 11.1 default config, then a
make menuconfig and then Xen options do not show up, can I edit
linux-2.6-xen/.config directly using vi and then add the following Xen
configuration options manually?
CONFIG_XEN=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=32
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_PCI=y
CONFIG_PCI_XEN=y
CONFIG_XEN_BLKDEV_FRONTEND=m
CONFIG_NETXEN_NIC=m
CONFIG_XEN_NETDEV_FRONTEND=m
CONFIG_XEN_KBDDEV_FRONTEND=m
CONFIG_HVC_XEN=y
CONFIG_XEN_FBDEV_FRONTEND=m
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XEN_BACKEND=y
CONFIG_XEN_BLKDEV_BACKEND=y
CONFIG_XEN_NETDEV_BACKEND=y
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_XENBUS_FRONTEND=mThank you!
Mr. Teo En Ming Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Mobile: +65-96489798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming <enming.teo@asiasoftsea.net>
Cc: xen-devel@lists.xensource.com
Date: Wed, 22 Jul 2009 16:30:12 +0300
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
On Wed, Jul
22, 2009 at 08:36:26PM +0800, Teo En Ming wrote:
> Hi All,
>
> I followed the instructions here at
>
http://bderzhavets.wordpress.com/2009/06/10/setup-fedora-11-pv-domu-at-xen-3-4-1-dom0-kernel-2-6-30-rc6-tip-on-top-of-fedora-11/
[http://bderzhavets.wordpress.com/2009/06/10/setup-fedora-11-pv-domu-at-xen-3-4-1-dom0-kernel-2-6-30-rc6-tip-on-top-of-fedora-11/]
>
> However, when I do a "make menuconfig", I cannot see any
XEN related
> configuration options. What am I missing?
>
http://wiki.xensource.com/xenwiki/XenParavirtOps
[http://wiki.xensource.com/xenwiki/XenParavirtOps]
If you're compiling 32b kernel, you need to first enable PAE
support, before
you get the Xen options in menuconfig. Detailt in the URL
above.
-- Pasi
> Thank you.
>
> Mr. Teo En Ming Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical
> Engineering)
>
> Technical Support Engineer
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Mobile: +65-96489798
> MSN: teoenming@hotmail.com
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-22 15:47 ` Teo En Ming
@ 2009-07-22 16:04 ` Pasi Kärkkäinen
2009-07-22 16:27 ` Pasi Kärkkäinen
0 siblings, 1 reply; 86+ messages in thread
From: Pasi Kärkkäinen @ 2009-07-22 16:04 UTC (permalink / raw)
To: Teo En Ming; +Cc: xen-devel
On Wed, Jul 22, 2009 at 11:47:11PM +0800, Teo En Ming wrote:
> OOOPS! I still got an error compiling the kernel image. Please advise. See
> console output below.
>
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.30-rc6-tip-next-no-highpte
That's some random .config from me.. it should work. It works for me.
-- Pasi
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-22 16:04 ` Pasi Kärkkäinen
@ 2009-07-22 16:27 ` Pasi Kärkkäinen
2009-07-22 16:52 ` Teo En Ming (Zhang Enming)
0 siblings, 1 reply; 86+ messages in thread
From: Pasi Kärkkäinen @ 2009-07-22 16:27 UTC (permalink / raw)
To: Teo En Ming; +Cc: xen-devel
On Wed, Jul 22, 2009 at 07:04:48PM +0300, Pasi Kärkkäinen wrote:
> On Wed, Jul 22, 2009 at 11:47:11PM +0800, Teo En Ming wrote:
> > OOOPS! I still got an error compiling the kernel image. Please advise. See
> > console output below.
> >
>
> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.30-rc6-tip-next-no-highpte
>
> That's some random .config from me.. it should work. It works for me.
>
I was using that .config with xen-tip/next pv_ops dom0 kernel.
-- Pasi
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-22 16:27 ` Pasi Kärkkäinen
@ 2009-07-22 16:52 ` Teo En Ming (Zhang Enming)
2009-07-22 17:17 ` Teo En Ming (Zhang Enming)
0 siblings, 1 reply; 86+ messages in thread
From: Teo En Ming (Zhang Enming) @ 2009-07-22 16:52 UTC (permalink / raw)
To: pasik; +Cc: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 896 bytes --]
Hi Pasik
I suspect that the Z0_startup_32 error has something to do with
compiling 32-bit xen kernels. The problem may not appear when compiling
64-bit xen kernels.
Pasi Kärkkäinen wrote:
> On Wed, Jul 22, 2009 at 07:04:48PM +0300, Pasi Kärkkäinen wrote:
>
>> On Wed, Jul 22, 2009 at 11:47:11PM +0800, Teo En Ming wrote:
>>
>>> OOOPS! I still got an error compiling the kernel image. Please advise. See
>>> console output below.
>>>
>>>
>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.30-rc6-tip-next-no-highpte
>>
>> That's some random .config from me.. it should work. It works for me.
>>
>>
>
> I was using that .config with xen-tip/next pv_ops dom0 kernel.
>
> -- Pasi
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
[-- Attachment #1.2: Type: text/html, Size: 1676 bytes --]
[-- Attachment #2.1: "AVG certification" --]
[-- Type: text/plain, Size: 159 bytes --]
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.20/2251 - Release Date: 07/20/09 18:29:00
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-22 16:52 ` Teo En Ming (Zhang Enming)
@ 2009-07-22 17:17 ` Teo En Ming (Zhang Enming)
2009-07-22 17:32 ` Pasi Kärkkäinen
0 siblings, 1 reply; 86+ messages in thread
From: Teo En Ming (Zhang Enming) @ 2009-07-22 17:17 UTC (permalink / raw)
To: enming.teo; +Cc: xen-devel, jeremy.fitzhardinge
[-- Attachment #1.1: Type: text/plain, Size: 2063 bytes --]
Dear Pasik,
This morning when I go to office i will examine the differences between
your .config and my .config using diff and create a patch. I will then
look through the generated patch file and patch my .config accordingly.
Regards,
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo En Ming (Zhang Enming) wrote:
> Hi Pasik
>
> I suspect that the Z0_startup_32 error has something to do with
> compiling 32-bit xen kernels. The problem may not appear when
> compiling 64-bit xen kernels.
>
> Pasi Kärkkäinen wrote:
>> On Wed, Jul 22, 2009 at 07:04:48PM +0300, Pasi Kärkkäinen wrote:
>>
>>> On Wed, Jul 22, 2009 at 11:47:11PM +0800, Teo En Ming wrote:
>>>
>>>> OOOPS! I still got an error compiling the kernel image. Please advise. See
>>>> console output below.
>>>>
>>>>
>>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.30-rc6-tip-next-no-highpte
>>>
>>> That's some random .config from me.. it should work. It works for me.
>>>
>>>
>>
>> I was using that .config with xen-tip/next pv_ops dom0 kernel.
>>
>> -- Pasi
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>
> ------------------------------------------------------------------------
>
>
> No virus found in this outgoing message.
> Checked by AVG - www.avg.com
> Version: 8.5.392 / Virus Database: 270.13.20/2251 - Release Date: 07/20/09 18:29:00
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
[-- Attachment #1.2: Type: text/html, Size: 3300 bytes --]
[-- Attachment #2.1: "AVG certification" --]
[-- Type: text/plain, Size: 159 bytes --]
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.20/2251 - Release Date: 07/20/09 18:29:00
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-22 17:17 ` Teo En Ming (Zhang Enming)
@ 2009-07-22 17:32 ` Pasi Kärkkäinen
2009-07-23 2:21 ` Teo En Ming
0 siblings, 1 reply; 86+ messages in thread
From: Pasi Kärkkäinen @ 2009-07-22 17:32 UTC (permalink / raw)
To: Teo En Ming (Zhang Enming); +Cc: xen-devel, jeremy.fitzhardinge
On Thu, Jul 23, 2009 at 01:17:23AM +0800, Teo En Ming (Zhang Enming) wrote:
> Dear Pasik,
>
> This morning when I go to office i will examine the differences between
> your .config and my .config using diff and create a patch. I will then
> look through the generated patch file and patch my .config accordingly.
>
Yep.
Just remember my .config is a mess; it's originally based on some Fedora 10
default kernel, and then changed many times after that..
But it works for me :)
I've been compiling and running on Fedora 10 and Fedora 11, using Xen 3.3.1
and Xen 3.4.0.
-- Pasi
> Regards,
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
> Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> Teo En Ming (Zhang Enming) wrote:
> >Hi Pasik
> >
> >I suspect that the Z0_startup_32 error has something to do with
> >compiling 32-bit xen kernels. The problem may not appear when
> >compiling 64-bit xen kernels.
> >
> >Pasi Kärkkäinen wrote:
> >>On Wed, Jul 22, 2009 at 07:04:48PM +0300, Pasi Kärkkäinen wrote:
> >>
> >>>On Wed, Jul 22, 2009 at 11:47:11PM +0800, Teo En Ming wrote:
> >>>
> >>>>OOOPS! I still got an error compiling the kernel image. Please advise.
> >>>>See console output below.
> >>>>
> >>>>
> >>>http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.30-rc6-tip-next-no-highpte
> >>>
> >>>That's some random .config from me.. it should work. It works for me.
> >>>
> >>>
> >>
> >>I was using that .config with xen-tip/next pv_ops dom0 kernel.
> >>
> >>-- Pasi
> >>
> >>_______________________________________________
> >>Xen-devel mailing list
> >>Xen-devel@lists.xensource.com
> >>http://lists.xensource.com/xen-devel
> >>
> >
> >------------------------------------------------------------------------
> >
> >
> >No virus found in this outgoing message.
> >Checked by AVG - www.avg.com
> >Version: 8.5.392 / Virus Database: 270.13.20/2251 - Release Date: 07/20/09
> >18:29:00
> >
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >Xen-devel mailing list
> >Xen-devel@lists.xensource.com
> >http://lists.xensource.com/xen-devel
> >
>
>
> No virus found in this outgoing message.
> Checked by AVG - www.avg.com
> Version: 8.5.392 / Virus Database: 270.13.20/2251 - Release Date: 07/20/09 18:29:00
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-22 17:32 ` Pasi Kärkkäinen
@ 2009-07-23 2:21 ` Teo En Ming
2009-07-23 2:42 ` Teo En Ming
2009-07-23 3:27 ` Teo En Ming
0 siblings, 2 replies; 86+ messages in thread
From: Teo En Ming @ 2009-07-23 2:21 UTC (permalink / raw)
To: Pasi Kärkkäinen; +Cc: xen-devel, jeremy.fitzhardinge
[-- Attachment #1.1: Type: text/plain, Size: 111840 bytes --]
Dear Pasik,
I just did a diff this morning. Here are the differences between my
kernel configuration and your kernel configuration.
<CODE>
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
-CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEM_RES_CTLR=y
-# CONFIG_CGROUP_MEM_RES_CTLR_SWAP is not set
-CONFIG_MM_OWNER=y
+# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
@@ -135,7 +131,7 @@
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -158,15 +154,15 @@
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
-CONFIG_OPROFILE=m
-# CONFIG_OPROFILE_IBS is not set
+# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -182,10 +178,10 @@
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
+# CONFIG_MODULE_FORCE_LOAD is not setCONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
@@ -205,24 +201,24 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
-# CONFIG_SPARSE_IRQ is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_RDC321X is not set
-CONFIG_X86_32_NON_STANDARD=y
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
+# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
@@ -235,25 +231,24 @@
CONFIG_XEN_PRIVILEGED_GUEST=y
# CONFIG_XEN_PCI_PASSTHROUGH_DEBUG is not set
CONFIG_MICROCODE_XEN=y
-# CONFIG_VMI is not set
+CONFIG_VMI=y
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
-# CONFIG_PARAVIRT_SPINLOCKS is not set
+CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_MEMTEST is not set
-CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
-CONFIG_M686=y
+# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
-# CONFIG_MPENTIUM4 is not set
+CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
@@ -274,9 +269,8 @@
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=5
+CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
-CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
@@ -296,21 +290,24 @@
CONFIG_CPU_SUP_UMC_32=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
-# CONFIG_HPET_TIMER is not set
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=8
-# CONFIG_SCHED_SMT is not set
+CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
-# CONFIG_X86_MCE is not set
+CONFIG_X86_MCE=y
+# CONFIG_X86_MCE_NONFATAL is not set
+CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
@@ -350,7 +347,7 @@
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_MMU_NOTIFIER=y
-# CONFIG_HIGHPTE is not set
+CONFIG_HIGHPTE=n
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
@@ -359,23 +356,23 @@
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
-# CONFIG_EFI is not set
+CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
+# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x1000000
+CONFIG_CRASH_DUMP=y
+CONFIG_PHYSICAL_START=0x400000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
-CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_PHYSICAL_ALIGN=0x400000
CONFIG_HOTPLUG_CPU=y
-CONFIG_COMPAT_VDSO=y
+# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -383,10 +380,15 @@
# Power management and ACPI options
#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_TRACE=y
+CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
@@ -395,32 +397,75 @@
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y-CONFIG_ACPI_AC=m
-CONFIG_ACPI_BATTERY=m
-CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
-CONFIG_ACPI_FAN=m
+CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_THERMAL=m
-CONFIG_ACPI_CUSTOM_DSDT_FILE=""
+CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=2001
-CONFIG_ACPI_DEBUG=y
-# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
+CONFIG_ACPI_BLACKLIST_YEAR=1999
+# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
-CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=m
-# CONFIG_APM is not set
+CONFIG_X86_APM_BOOT=y
+CONFIG_APM=y
+# CONFIG_APM_IGNORE_USER_SUSPEND is not set
+# CONFIG_APM_DO_ENABLE is not set
+CONFIG_APM_CPU_IDLE=y
+# CONFIG_APM_DISPLAY_BLANK is not set
+# CONFIG_APM_ALLOW_INTS is not set
#
# CPU Frequency scaling
#
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m+
+#
+# CPUFreq processor drivers
+#
+CONFIG_X86_ACPI_CPUFREQ=m
+# CONFIG_X86_POWERNOW_K6 is not set
+CONFIG_X86_POWERNOW_K7=y
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+# CONFIG_X86_GX_SUSPMOD is not set
+# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
+CONFIG_X86_SPEEDSTEP_ICH=y
+CONFIG_X86_SPEEDSTEP_SMI=y
+CONFIG_X86_P4_CLOCKMOD=m
+# CONFIG_X86_CPUFREQ_NFORCE2 is not set
+CONFIG_X86_LONGRUN=y
+# CONFIG_X86_LONGHAUL is not set
+CONFIG_X86_E_POWERSAVER=y
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=y
+# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
@@ -451,15 +496,15 @@
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
-# CONFIG_ISA is not set
+CONFIG_ISA=y
+# CONFIG_EISA is not set
# CONFIG_MCA is not set
-CONFIG_SCx200=m
-CONFIG_SCx200HR_TIMER=m
+# CONFIG_SCx200 is not set
CONFIG_OLPC=y
CONFIG_K8_NB=y
-CONFIG_PCCARD=m
+CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
@@ -475,17 +520,19 @@
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
+CONFIG_I82365=m
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_IBM is not set
-CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
-CONFIG_HOTPLUG_PCI_CPCI=y
-CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
-CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
-CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
@@ -493,22 +540,22 @@
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
-CONFIG_PACKET=m
+CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
@@ -561,12 +608,12 @@
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
+CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
@@ -582,8 +629,9 @@
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -596,7 +644,7 @@
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
@@ -615,8 +663,8 @@
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
@@ -628,6 +676,7 @@
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
@@ -637,7 +686,7 @@
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_DCCP=m@@ -657,9 +706,11 @@
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
@@ -701,17 +752,17 @@
#
# IP: Netfilter Configuration
#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
@@ -766,7 +817,7 @@
#
# DECnet: Netfilter Configuration
#
-CONFIG_DECNET_NF_GRABULATOR=m
+# CONFIG_DECNET_NF_GRABULATOR is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -805,19 +856,21 @@
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
-# CONFIG_NET_DCCPPROBE is not set
+CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set-# CONFIG_TIPC is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
-CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
+# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_STP=m
@@ -829,21 +882,21 @@
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
-CONFIG_LLC2=m
+# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
+# CONFIG_LTPC is not set
+# CONFIG_COPS is not set
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
-CONFIG_X25=m
-CONFIG_LAPB=m
-CONFIG_ECONET=m
-# CONFIG_ECONET_AUNUDP is not set
-# CONFIG_ECONET_NATIVE is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
+CONFIG_PHONET=m
CONFIG_NET_SCHED=y
#
@@ -881,7 +934,13 @@
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_CLS_CGROUP is not set
-# CONFIG_NET_EMATCH is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m@@ -892,7 +951,7 @@
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
-# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
@@ -900,7 +959,7 @@
# Network testing
#
CONFIG_NET_PKTGEN=m
-CONFIG_NET_TCPPROBE=m
+# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
@@ -918,6 +977,9 @@
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
+CONFIG_SCC=m
+# CONFIG_SCC_DELAY is not set
+CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
@@ -940,13 +1002,13 @@
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
+# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
+CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
@@ -1017,14 +1079,12 @@
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
-CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-CONFIG_RXKAD=m
+# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not
set+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
@@ -1057,14 +1117,14 @@
#
# Generic Driver Options
#
-CONFIG_UEVENT_HELPER_PATH=""
-# CONFIG_STANDALONE is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_DEBUG_DEVRES=y
CONFIG_SYS_HYPERVISOR=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
@@ -1083,15 +1143,15 @@
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
-CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
CONFIG_RFD_FTL=m
-# CONFIG_SSFDC is not set
+CONFIG_SSFDC=m
CONFIG_MTD_OOPS=m
#
@@ -1100,11 +1160,7 @@
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y@@ -1115,49 +1171,43 @@
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
-CONFIG_MTD_SBC_GXX=m
-CONFIG_MTD_SCx200_DOCFLASH=m
-CONFIG_MTD_AMD76XROM=m
-CONFIG_MTD_ICHXROM=m
+# CONFIG_MTD_SBC_GXX is not set
+# CONFIG_MTD_AMD76XROM is not set
+# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
-CONFIG_MTD_NETtel=m
-CONFIG_MTD_DILNETPC=m
-CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
-CONFIG_MTD_L440GX=m
+# CONFIG_MTD_NETtel is not set
+# CONFIG_MTD_DILNETPC is not set
+# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
-CONFIG_MTD_INTEL_VR_NOR=m
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
-CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
@@ -1166,15 +1216,9 @@
#
# Disk-On-Chip Device Drivers
#
-CONFIG_MTD_DOC2000=m
-CONFIG_MTD_DOC2001=m
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-CONFIG_MTD_DOCPROBE_ADVANCED=y
-CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
-CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_DOCPROBE_55AA=y
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
@@ -1183,17 +1227,13 @@
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
-# CONFIG_MTD_NAND_CS553X is not set
+CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
+# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ALAUDA=m
-CONFIG_MTD_ONENAND=m
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-CONFIG_MTD_ONENAND_OTP=y
-CONFIG_MTD_ONENAND_2X_PROGRAM=y
-CONFIG_MTD_ONENAND_SIM=m
+# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
@@ -1215,11 +1255,11 @@
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_PC_SUPERIO=y
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
@@ -1228,9 +1268,12 @@
#
# Protocols
#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
+# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE=m
#
@@ -1267,116 +1310,50 @@
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=64000
-CONFIG_BLK_DEV_XIP=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
-CONFIG_CDROM_PKTCDVD_WCACHE=y
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=y
+CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
-CONFIG_PHANTOM=m
+# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
-# CONFIG_ICS932S401 is not set
+CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HP_ILO=m
# CONFIG_DELL_LAPTOP is not set
# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
+CONFIG_C2PORT=m
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_93CX6=m
CONFIG_HAVE_IDE=y
-CONFIG_IDE=m
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=m
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-CONFIG_BLK_DEV_IDECS=m
-CONFIG_BLK_DEV_DELKIN=m
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEACPI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-CONFIG_BLK_DEV_PLATFORM=m
-CONFIG_BLK_DEV_CMD640=m
-CONFIG_BLK_DEV_CMD640_ENHANCED=y
-CONFIG_BLK_DEV_IDEPNP=m
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_BLK_DEV_OFFBOARD=y
-CONFIG_BLK_DEV_GENERIC=m
-CONFIG_BLK_DEV_OPTI621=m
-CONFIG_BLK_DEV_RZ1000=m
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-CONFIG_BLK_DEV_AEC62XX=m
-CONFIG_BLK_DEV_ALI15X3=m
-CONFIG_BLK_DEV_AMD74XX=m
-CONFIG_BLK_DEV_ATIIXP=m
-CONFIG_BLK_DEV_CMD64X=m
-CONFIG_BLK_DEV_TRIFLEX=m
-CONFIG_BLK_DEV_CS5520=m-# CONFIG_BLK_DEV_CS5536 is not set
-CONFIG_BLK_DEV_HPT366=m
-CONFIG_BLK_DEV_JMICRON=m
-CONFIG_BLK_DEV_SC1200=m
-CONFIG_BLK_DEV_PIIX=m
-# CONFIG_BLK_DEV_IT8172 is not set
-CONFIG_BLK_DEV_IT8213=m
-CONFIG_BLK_DEV_IT821X=m
-CONFIG_BLK_DEV_NS87415=m
-CONFIG_BLK_DEV_PDC202XX_OLD=m
-CONFIG_BLK_DEV_PDC202XX_NEW=m
-CONFIG_BLK_DEV_SVWKS=m
-CONFIG_BLK_DEV_SIIMAGE=m
-CONFIG_BLK_DEV_SIS5513=m
-CONFIG_BLK_DEV_SLC90E66=m
-CONFIG_BLK_DEV_TRM290=m
-CONFIG_BLK_DEV_VIA82CXXX=m
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
+CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
@@ -1385,12 +1362,12 @@
#
# SCSI support type (disk, tape, CD-ROM)
#
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
@@ -1400,7 +1377,7 @@
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
-CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-CONFIG_SCSI_CXGB3_ISCSI=m
+# CONFIG_SCSI_CXGB3_ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
+# CONFIG_SCSI_7000FASST is not set
CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AHA152X=m
+# CONFIG_SCSI_AHA1542 is not set
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
-CONFIG_AIC7XXX_RESET_DELAY_MS=5000
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=32
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
-CONFIG_AIC79XX_REG_PRETTY_PRINT=y
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
-CONFIG_AIC94XX_DEBUG=y
-CONFIG_SCSI_DPT_I2O=m
+# CONFIG_AIC94XX_DEBUG is not set
+# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=m
+# CONFIG_SCSI_IN2000 is not set
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
@@ -1448,20 +1429,22 @@
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
-# CONFIG_SCSI_MPT2SAS is not set
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m-CONFIG_FCOE=m
-CONFIG_SCSI_DMX3191D=m
-CONFIG_SCSI_EATA=m
-CONFIG_SCSI_EATA_TAGGED_QUEUE=y
-CONFIG_SCSI_EATA_LINKED_COMMANDS=y
-CONFIG_SCSI_EATA_MAX_TAGS=16
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
@@ -1470,23 +1453,28 @@
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_IPR=m
-CONFIG_SCSI_IPR_TRACE=y
-CONFIG_SCSI_IPR_DUMP=y
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+# CONFIG_SCSI_SYM53C416 is not set
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
-CONFIG_SCSI_NSP32=m
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_SRP=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
@@ -1494,21 +1482,24 @@
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
-CONFIG_SCSI_DH=m CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
-# CONFIG_SCSI_OSD_INITIATOR is not set
-CONFIG_ATA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=m
+CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
-CONFIG_ATA_PIIX=m
+CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
@@ -1539,10 +1530,12 @@
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
-# CONFIG_PATA_HPT3X3_DMA is not set
+CONFIG_PATA_HPT3X3_DMA=y
+# CONFIG_PATA_ISAPNP is not set
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
+# CONFIG_PATA_LEGACY is not set
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
@@ -1555,15 +1548,17 @@
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
-CONFIG_PATA_RADISYS=m
-CONFIG_PATA_RZ1000=m
-CONFIG_PATA_SC1200=m
+CONFIG_PATA_QDI=m
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
+# CONFIG_PATA_WINBOND_VLB is not set
CONFIG_PATA_SCH=m
CONFIG_MD=y CONFIG_MD_RAID6_PQ=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_DELAY=m
+# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
-CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
-# CONFIG_FUSION_LOGGING is not set
+CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
@@ -1601,20 +1596,13 @@
#
# Enable only one of the two stacks, unless you know what you
are doing
#
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=m
-CONFIG_IEEE1394_OHCI1394=m
-CONFIG_IEEE1394_PCILYNX=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_DV1394=m
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_SBP2=m
+# CONFIG_IEEE1394 is not set
CONFIG_I2O=m
-CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
@@ -1623,7 +1611,8 @@
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
-# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_IFB=m
@@ -1634,15 +1623,7 @@
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_NET_SB1000=m
-CONFIG_ARCNET=m
-CONFIG_ARCNET_1201=m
-CONFIG_ARCNET_1051=m
-CONFIG_ARCNET_RAW=m
-CONFIG_ARCNET_CAP=m
-CONFIG_ARCNET_COM90xx=m
-CONFIG_ARCNET_COM90xxIO=m
-CONFIG_ARCNET_RIM_I=m
-# CONFIG_ARCNET_COM20020 is not set
+# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
@@ -1662,32 +1643,52 @@
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MDIO_BITBANG=m
-# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
+# CONFIG_EL1 is not set
+# CONFIG_EL2 is not set
+# CONFIG_ELPLUS is not set
+# CONFIG_EL16 is not set
+CONFIG_EL3=m
+# CONFIG_3C515 is not set
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
-CONFIG_ENC28J60=m
-# CONFIG_ENC28J60_WRITEVERIFY is not set
-# CONFIG_ETHOC is not set
+# CONFIG_LANCE is not set
+CONFIG_NET_VENDOR_SMC=y
+CONFIG_ULTRA=m
+# CONFIG_SMC9194 is not set
+CONFIG_ETHOC=m
+# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-CONFIG_TULIP_NAPI=y
-CONFIG_TULIP_NAPI_HW_MITIGATION=y
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
-CONFIG_HP100=m
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+CONFIG_EWRK3=m
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=m
+# CONFIG_ZNET is not set
+# CONFIG_SEEQ8005 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -1699,12 +1700,15 @@
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
+# CONFIG_CS89x0 is not set
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
@@ -1723,7 +1727,7 @@
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
-# CONFIG_VIA_RHINE_MMIO is not set
+CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
@@ -1738,7 +1742,7 @@
CONFIG_E1000E=m
CONFIG_IP1000=m CONFIG_IGB=m
-# CONFIG_IGBVF is not set
+CONFIG_IGBVF=m
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
@@ -1756,55 +1760,52 @@
CONFIG_ATL1=m
CONFIG_ATL1E=m
# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
+CONFIG_JME=m
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=m
-# CONFIG_ENIC is not set
+CONFIG_ENIC=m
CONFIG_IXGBE=m
CONFIG_IXGB=m
CONFIG_S2IO=m
CONFIG_MYRI10GE=m
CONFIG_NIU=m
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
-# CONFIG_QLGE is not set
-CONFIG_SFC=m
-CONFIG_SFC_MTD=y
-# CONFIG_BE2NET is not set
+CONFIG_QLGE=m
+# CONFIG_SFC is not set
+CONFIG_BE2NET=m
CONFIG_TR=y
+# CONFIG_IBMTR is not set
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
-CONFIG_TMS380TR=m
-CONFIG_TMSPCI=m
-CONFIG_ABYSS=m
+# CONFIG_TMS380TR is not set
+# CONFIG_SMCTR is not set
#
# Wireless LAN
#
-CONFIG_WLAN_PRE80211=y
-CONFIG_STRIP=m
-CONFIG_PCMCIA_WAVELAN=m
-CONFIG_PCMCIA_NETWAVE=m-CONFIG_PCMCIA_RAYCS=m
+# CONFIG_PCMCIA_RAYCS is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_LIBERTAS_DEBUG=y
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
-# CONFIG_AT76C50X_USB is not set
+CONFIG_AT76C50X_USB=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
@@ -1814,17 +1815,17 @@
CONFIG_RTL8187=m
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
-# CONFIG_MWL8K is not set
+CONFIG_MWL8K=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
-# CONFIG_P54_SPI is not set
CONFIG_P54_LEDS=y
CONFIG_ATH5K=m
-# CONFIG_ATH5K_DEBUG is not set
+CONFIG_ATH5K_DEBUG=y
CONFIG_ATH9K=m
# CONFIG_ATH9K_DEBUG is not set
-# CONFIG_AR9170_USB is not set
+CONFIG_AR9170_USB=m
+CONFIG_AR9170_LEDS=y
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
@@ -1840,7 +1841,8 @@
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLWIFI_RFKILL=y
# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT is not set
-# CONFIG_IWLWIFI_DEBUG is not set
+CONFIG_IWLWIFI_DEBUG=y
+CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWLAGN=m
CONFIG_IWL4965=y
CONFIG_IWL5000=y
@@ -1859,13 +1861,14 @@
CONFIG_B43_PIO=y
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
-# CONFIG_B43_DEBUG is not set+CONFIG_B43_DEBUG=y
+# CONFIG_B43_FORCE_PIO is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_RFKILL=y
-# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
@@ -1896,9 +1899,9 @@
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_DM9601=m
-# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
@@ -1923,63 +1926,40 @@
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_PCMCIA_IBMTR=m
-CONFIG_WAN=y
-CONFIG_LANMEDIA=m
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-CONFIG_HDLC_X25=m
-CONFIG_PCI200SYN=m
-CONFIG_WANXL=m
-CONFIG_PC300TOO=m
-CONFIG_FARSYNC=m
-# CONFIG_DSCC4 is not set
-CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
-# CONFIG_WAN_ROUTER_DRIVERS is not set
-CONFIG_LAPBETHER=m
-CONFIG_X25_ASY=m
-# CONFIG_SBNI is not set
+# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
-CONFIG_ATM_DUMMY=m
+# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m-CONFIG_ATM_ZATM=m
-# CONFIG_ATM_ZATM_DEBUG is not set
+# CONFIG_ATM_ZATM is not set
CONFIG_ATM_NICSTAR=m
-CONFIG_ATM_NICSTAR_USE_SUNI=y
-CONFIG_ATM_NICSTAR_USE_IDT77105=y
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
-CONFIG_ATM_IDT77252_RCV_ALL=y
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
-CONFIG_ATM_IA=m
-# CONFIG_ATM_IA_DEBUG is not set
+# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=m
-CONFIG_ATM_FORE200E_USE_TASKLET=y
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
-CONFIG_ATM_HE_USE_SUNI=y
+# CONFIG_ATM_HE_USE_SUNI is not set
# CONFIG_ATM_SOLOS is not set
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
-CONFIG_HIPPI=y
-CONFIG_ROADRUNNER=m
-CONFIG_ROADRUNNER_LARGE_RINGS=y
+# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
@@ -1987,7 +1967,7 @@
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
@@ -1996,23 +1976,23 @@
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_VIRTIO_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
+# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
-CONFIG_ISDN_X25=y
#
# ISDN feature submodules
@@ -2033,9 +2013,9 @@
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
-# CONFIG_HISAX_NO_SENDCOMPLETE is not set
-# CONFIG_HISAX_NO_LLC is not set
-# CONFIG_HISAX_NO_KEYPAD is not set
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
@@ -2043,17 +2023,27 @@
#
# HiSax supported cards
#
+# CONFIG_HISAX_16_0 is not set
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
+# CONFIG_HISAX_AVM_A1 is not set
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
+# CONFIG_HISAX_IX1MICROR2 is not set
CONFIG_HISAX_DIEHLDIVA=y
+# CONFIG_HISAX_ASUSCOM is not set
+# CONFIG_HISAX_TELEINT is not set
+# CONFIG_HISAX_HFCS is not set
CONFIG_HISAX_SEDLBAUER=y
+# CONFIG_HISAX_SPORTSTER is not set
+# CONFIG_HISAX_MIC is not set
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
+# CONFIG_HISAX_ISURF is not set
+# CONFIG_HISAX_HSTSAPHIR is not set
CONFIG_HISAX_BKM_A4T=y CONFIG_HISAX_GAZEL=y
@@ -2061,7 +2051,7 @@
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
-CONFIG_HISAX_DEBUG=y
+# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
@@ -2075,7 +2065,7 @@
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
+# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
@@ -2083,6 +2073,10 @@
#
# Active cards
#
+# CONFIG_ISDN_DRV_ICN is not set
+# CONFIG_ISDN_DRV_PCBIT is not set
+# CONFIG_ISDN_DRV_SC is not set
+# CONFIG_ISDN_DRV_ACT2000 is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_ISDN_DRV_GIGASET=m
@@ -2090,10 +2084,10 @@
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
-CONFIG_GIGASET_UNDOCREQ=y
+# CONFIG_GIGASET_UNDOCREQ is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
+# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
@@ -2104,8 +2098,10 @@
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
+# CONFIG_ISDN_DRV_AVMB1_B1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+# CONFIG_ISDN_DRV_AVMB1_T1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
@@ -2117,20 +2113,20 @@
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m-CONFIG_PHONE=m
+# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
+CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
@@ -2143,12 +2139,11 @@
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_KEYBOARD_NEWTON=m
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
@@ -2158,12 +2153,14 @@
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_PS2_OLPC is not set
+CONFIG_MOUSE_PS2_OLPC=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_GPIO=m
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
@@ -2193,6 +2190,7 @@
CONFIG_JOYSTICK_XPAD=m+# CONFIG_JOYSTICK_WALKERA0701 is not
set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
@@ -2200,10 +2198,7 @@
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
@@ -2212,13 +2207,11 @@
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
+# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
@@ -2243,19 +2236,18 @@
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
-# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_CT82C710=m
-CONFIG_SERIO_PARKBD=m
-CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
@@ -2272,94 +2264,100 @@
CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
+# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_COMPUTONE=m
+# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
-CONFIG_CYZ_INTR=y
-CONFIG_DIGIEPCA=m
-CONFIG_MOXA_INTELLIO=m
-CONFIG_MOXA_SMARTIO=m
-CONFIG_ISI=m
+# CONFIG_CYZ_INTR is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
-CONFIG_RISCOM8=m
-CONFIG_SPECIALIX=m
-CONFIG_SX=m
-CONFIG_RIO=m
-CONFIG_RIO_OLDPCI=y
-CONFIG_STALDRV=y
-# CONFIG_STALLION is not set
-# CONFIG_ISTALLION is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
CONFIG_NOZOMI=m
#
# Serial drivers
#
-CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_PCI=m
-CONFIG_SERIAL_8250_PNP=m
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=16
-CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
+# CONFIG_SERIAL_8250_FOURPORT is not set+# CONFIG_SERIAL_8250_BOCA
is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_CORE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=0
+# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
+CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
+CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
-CONFIG_IPMI_PANIC_EVENT=y
-CONFIG_IPMI_PANIC_STRING=y
+# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
-CONFIG_NVRAM=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=y
+CONFIG_DTLK=m
CONFIG_R3964=m
-CONFIG_APPLICOM=m
+# CONFIG_APPLICOM is not set
CONFIG_SONYPI=m
#
# PCMCIA character devices
# CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
-CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=4096
-# CONFIG_HPET is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_HPET=y
+# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
@@ -2400,16 +2398,15 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
-CONFIG_I2C_GPIO=m
-CONFIG_I2C_OCORES=m
-# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SIMTEC=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_TAOS_EVM=m
+# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
#
@@ -2420,75 +2417,36 @@
#
# Other I2C/SMBus bus drivers
#
+CONFIG_I2C_PCA_ISA=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_STUB=m
-CONFIG_SCx200_I2C=m
-CONFIG_SCx200_I2C_SCL=12
-CONFIG_SCx200_I2C_SDA=13
-CONFIG_SCx200_ACB=m
+# CONFIG_SCx200_ACB is not set
#
# Miscellaneous I2C Chip support
#
-CONFIG_DS1682=m
+# CONFIG_DS1682 is not set+CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_MAX6875=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=m
-CONFIG_SPI_BUTTERFLY=m
-# CONFIG_SPI_GPIO is not set
-CONFIG_SPI_LM70_LLP=m
-
-#
-# SPI Protocol Masters
-#
-CONFIG_SPI_SPIDEV=m
-CONFIG_SPI_TLE62X0=m
+# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-CONFIG_GPIO_MAX732X=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_GPIO_PCF857X=m
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-CONFIG_GPIO_MAX7301=m
-CONFIG_GPIO_MCP23S08=m
+# CONFIG_GPIOLIB is not set
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#+# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
-CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
@@ -2499,33 +2457,32 @@
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
-# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=m
-CONFIG_BATTERY_DS2760=m
-CONFIG_BATTERY_OLPC=m
-# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_OLPC=y
+CONFIG_BATTERY_BQ27x00=m
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
-CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
-# CONFIG_SENSORS_ADT7462 is not set
+CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7473=m
-# CONFIG_SENSORS_ADT7475 is not set
+CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
-# CONFIG_SENSORS_ATK0110 is not set
+CONFIG_SENSORS_ATK0110=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
@@ -2535,7 +2492,7 @@
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_FSCHMD=m
-# CONFIG_SENSORS_G760A is not set
+CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m@@ -2543,7 +2500,6 @@
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
@@ -2554,16 +2510,14 @@
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
-# CONFIG_SENSORS_LTC4215 is not set
+CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
+CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
-# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_SMSC47M1=m
@@ -2583,11 +2537,10 @@
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
-# CONFIG_SENSORS_LIS3LV02D is not set
+CONFIG_SENSORS_LIS3LV02D=m
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_THERMAL=m
-CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -2595,37 +2548,43 @@
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
-CONFIG_ACQUIRE_WDT=m
-CONFIG_ADVANTECH_WDT=m
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
-CONFIG_SC520_WDT=m
-CONFIG_EUROTECH_WDT=m
-CONFIG_IB700_WDT=m
+# CONFIG_SC520_WDT is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_IB700_WDT is not set-CONFIG_WAFER_WDT=m
+# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
-# CONFIG_IT87_WDT is not set
+CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
-CONFIG_SC1200_WDT=m
-CONFIG_SCx200_WDT=m
-CONFIG_PC87413_WDT=m
-CONFIG_60XX_WDT=m
-CONFIG_SBC8360_WDT=m
-CONFIG_SBC7240_WDT=m
-CONFIG_CPU5_WDT=m
+# CONFIG_SC1200_WDT is not set
+# CONFIG_PC87413_WDT is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_SBC7240_WDT is not set
+# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
-CONFIG_SMSC37B787_WDT=m
+# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
-# CONFIG_W83697UG_WDT is not set
+CONFIG_W83697UG_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
-CONFIG_SBC_EPX_C3_WATCHDOG=m
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
#
# PCI-based Watchdog Cards
@@ -2660,12 +2619,9 @@
#
CONFIG_MFD_CORE=m
CONFIG_MFD_SM501=m
-CONFIG_MFD_SM501_GPIO=y
-CONFIG_HTC_PASIC3=m
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+CONFIG_MFD_WM8400=m
@@ -2699,14 +2655,10 @@
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
-CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
@@ -2721,42 +2673,80 @@
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_TCM825X=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_SAA7191=m
+# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
+
+#
+# Video improvement chips
+#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
-CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
+# CONFIG_VIDEO_PMS is not set
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
@@ -2786,7 +2776,7 @@
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_MT9M001=m
-# CONFIG_SOC_CAMERA_MT9M111 is not set
+CONFIG_SOC_CAMERA_MT9M111=m
# CONFIG_SOC_CAMERA_MT9T031 is not set
CONFIG_SOC_CAMERA_MT9V022=m
# CONFIG_SOC_CAMERA_TW9910 is not set
@@ -2796,42 +2786,44 @@
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
+CONFIG_USB_M5602=m-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_OV519=m
# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-# CONFIG_VIDEO_HDPVR is not set
+CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
-# CONFIG_VIDEO_CX231XX is not set+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
@@ -2845,7 +2837,7 @@
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
-CONFIG_USB_ZC0301=m
+# CONFIG_USB_ZC0301 is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
@@ -2853,12 +2845,23 @@
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
CONFIG_USB_DSBR=m
CONFIG_USB_SI470X=m
-# CONFIG_USB_MR800 is not set
+CONFIG_USB_MR800=m
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
@@ -2878,32 +2881,7 @@
#
# Supported USB Adapters
#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-# CONFIG_DVB_USB_CXUSB is not set
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_DW2102=m
-# CONFIG_DVB_USB_CINERGY_T2 is not set
-CONFIG_DVB_USB_ANYSEE=m
-# CONFIG_DVB_USB_DTV5100 is not set
-# CONFIG_DVB_USB_AF9015 is not set
-# CONFIG_DVB_USB_CE6230 is not set
+# CONFIG_DVB_USB is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_SIANO_SMS1XXX=m
@@ -2933,11 +2911,6 @@
# CONFIG_DVB_DM1105 is not set
#
-# Supported FireWire (IEEE 1394) Adapters
-#
-# CONFIG_DVB_FIREDTV is not set
-
-#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
@@ -2948,8 +2921,6 @@
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0288=m
-CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
@@ -2961,8 +2932,6 @@
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
-CONFIG_DVB_CX24116=m
-CONFIG_DVB_SI21XX=m
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
@@ -2971,9 +2940,6 @@
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m CONFIG_DVB_S5H1411=m
CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
@@ -2998,17 +2963,17 @@
#
# Graphics support
#
-CONFIG_AGP=m
-CONFIG_AGP_ALI=m
-CONFIG_AGP_ATI=m
-CONFIG_AGP_AMD=m
-CONFIG_AGP_AMD64=m
-CONFIG_AGP_INTEL=m
-CONFIG_AGP_NVIDIA=m
-CONFIG_AGP_SIS=m
-CONFIG_AGP_SWORKS=m
-CONFIG_AGP_VIA=m
-CONFIG_AGP_EFFICEON=m
+CONFIG_AGP=y
+CONFIG_AGP_ALI=y
+CONFIG_AGP_ATI=y
+CONFIG_AGP_AMD=y
+CONFIG_AGP_AMD64=y
+CONFIG_AGP_INTEL=y
+CONFIG_AGP_NVIDIA=y
+CONFIG_AGP_SIS=y
+CONFIG_AGP_SWORKS=y
+CONFIG_AGP_VIA=y
+CONFIG_AGP_EFFICEON=y
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
@@ -3024,7 +2989,7 @@
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
@@ -3037,7 +3002,6 @@
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
@@ -3048,32 +3012,30 @@
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m-CONFIG_FB_CYBER2000=m
-CONFIG_FB_ARC=m
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
-CONFIG_FB_IMSTT=y
+# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
-CONFIG_FB_UVESA=m
+# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
-CONFIG_FB_N411=m
-CONFIG_FB_HGA=m
-CONFIG_FB_HGA_ACCEL=y
-CONFIG_FB_S1D13XXX=m
+CONFIG_FB_EFI=y
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
-CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
-CONFIG_FB_LE80578=m
-CONFIG_FB_CARILLO_RANCH=m
+# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
@@ -3081,13 +3043,15 @@
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
-# CONFIG_FB_MATROX_I2C is not set
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
-CONFIG_FB_SIS=m
-CONFIG_FB_SIS_300=y
-CONFIG_FB_SIS_315=y
-# CONFIG_FB_VIA is not set
+# CONFIG_FB_SIS is not set
+CONFIG_FB_VIA=m
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
-CONFIG_FB_VT8623=m
+# CONFIG_FB_VT8623 is not set
CONFIG_FB_TRIDENT=m
-CONFIG_FB_ARK=m
-CONFIG_FB_PM3=m
-CONFIG_FB_CARMINE=m
-CONFIG_FB_CARMINE_DRAM_EVAL=y
-# CONFIG_CARMINE_DRAM_CUSTOM is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=m
-CONFIG_FB_GEODE_GX=m
-CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_GEODE_LX=y
+CONFIG_FB_GEODE_GX=y
+# CONFIG_FB_GEODE_GX1 is not set
# CONFIG_FB_TMIO is not set
CONFIG_FB_SM501=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=y
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+# CONFIG_FB_MB862XX_PCI_GDC is not set
+CONFIG_FB_BROADSHEET=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_LTV350QV=m
-CONFIG_LCD_ILI9320=m
-# CONFIG_LCD_TDO24M is not set
-CONFIG_LCD_VGG2432A4=m
+# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=m
#
# Display device support
@@ -3154,14 +3111,18 @@
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
@@ -3177,19 +3138,22 @@
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
+CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
+CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTS64=m
@@ -3197,8 +3161,43 @@
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CS4231 is not set
+CONFIG_SND_CS4236=m
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_ES1688 is not set
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+CONFIG_SND_OPL3SA2=m
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_MIRO=m
+# CONFIG_SND_SB8 is not set
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+# CONFIG_SND_SB16_CSP is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_WAVEFRONT is not set
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
@@ -3209,7 +3208,7 @@
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
-CONFIG_SND_AW2=m
+# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
@@ -3220,7 +3219,7 @@
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
-# CONFIG_SND_CS5530 is not set
+CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
@@ -3248,7 +3247,7 @@
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
-CONFIG_SND_HDA_INPUT_BEEP=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
@@ -3287,87 +3286,63 @@
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
-CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
-# CONFIG_SND_USB_US122L is not set
-CONFIG_SND_PCMCIA=y
-CONFIG_SND_VXPOCKET=m
-CONFIG_SND_PDAUDIOCF=m
+CONFIG_SND_USB_US122L=m
+# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
-CONFIG_SOUND_PRIME=m
-CONFIG_SOUND_OSS=m
-CONFIG_SOUND_TRACEINIT=y
-CONFIG_SOUND_DMAP=y
-CONFIG_SOUND_SSCAPE=m
-CONFIG_SOUND_VMIDI=m
-CONFIG_SOUND_TRIX=m
-CONFIG_SOUND_MSS=m
-CONFIG_SOUND_MPU401=m
-CONFIG_SOUND_PAS=m
-CONFIG_SOUND_PSS=m
-CONFIG_PSS_MIXER=y
-# CONFIG_PSS_HAVE_BOOT is not set
-CONFIG_SOUND_SB=m
-CONFIG_SOUND_YM3812=m
-CONFIG_SOUND_UART6850=m
-CONFIG_SOUND_AEDSP16=m
-CONFIG_SC6600=y
-CONFIG_SC6600_JOY=y
-CONFIG_SC6600_CDROM=4
-CONFIG_SC6600_CDROMBASE=0x0-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
-CONFIG_USB_HID=m
+CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=m
-CONFIG_HID_KYE=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_KENSINGTON=m
-CONFIG_HID_LOGITECH=m
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_DRAGONRISE_FF=m
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_NTRIG=m
-CONFIG_HID_PANTHERLORD=m
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
# CONFIG_GREENASIA_FF is not set
-CONFIG_HID_TOPSEED=m
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+CONFIG_HID_TOPSEED=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=m
+CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
@@ -3379,43 +3354,38 @@
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
-CONFIG_USB_MON=m
+CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
-CONFIG_USB_C67X00_HCD=m
-CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
-CONFIG_USB_ISP116X_HCD=m
-CONFIG_USB_ISP1760_HCD=m
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_HCD_SSB is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_U132_HCD is not set
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_SL811_CS is not set
#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
-# CONFIG_USB_TMC is not set
+CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
@@ -3458,7 +3428,7 @@
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP210X is not set
+CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -3468,23 +3438,11 @@
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
+# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
@@ -3501,7 +3459,7 @@
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_SYMBOL=m CONFIG_USB_SERIAL_XIRCOM=m
@@ -3516,14 +3474,14 @@
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
-# CONFIG_USB_SEVSEG is not set
-CONFIG_USB_RIO500=m
+CONFIG_USB_SEVSEG=m
+# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
@@ -3534,7 +3492,7 @@
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
-# CONFIG_USB_VST is not set
+CONFIG_USB_VST=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
@@ -3544,8 +3502,8 @@
#
# OTG and related infrastructure
#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_OTG_UTILS=y
+CONFIG_NOP_USB_XCEIV=m
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
@@ -3557,7 +3515,7 @@
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
-CONFIG_MMC_TEST=m
+# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
@@ -3583,38 +3541,32 @@
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CLASS=y
#
-CONFIG_LEDS_NET48XX=m
-CONFIG_LEDS_WRAP=m
# CONFIG_LEDS_ALIX2 is not set
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_LP5521=m
CONFIG_LEDS_CLEVO_MAIL=m
-CONFIG_LEDS_PCA955X=m
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_BD2802=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_EDAC=y
#
@@ -3628,16 +3580,18 @@
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
-# CONFIG_EDAC_X38 is not set
+CONFIG_EDAC_X38=m
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
+CONFIG_EDAC_AMD8131=m
+CONFIG_EDAC_AMD8111=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
@@ -3645,8 +3599,8 @@
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_TEST=m
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
@@ -3662,34 +3616,27 @@
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
-CONFIG_RTC_DRV_S35390A=m
+# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
-# CONFIG_RTC_DRV_RX8581 is not set
+CONFIG_RTC_DRV_RX8581=m
#
# SPI RTC drivers
#
-CONFIG_RTC_DRV_M41T94=m
-CONFIG_RTC_DRV_DS1305=m
-# CONFIG_RTC_DRV_DS1390 is not set
-CONFIG_RTC_DRV_MAX6902=m
-CONFIG_RTC_DRV_R9701=m
-CONFIG_RTC_DRV_RS5C348=m
-# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
-CONFIG_RTC_DRV_CMOS=m
-# CONFIG_RTC_DRV_DS1286 is not set
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
-CONFIG_RTC_DRV_M48T86=m
-# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
-# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_V3020=m
# CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_SMX=m
-# CONFIG_UIO_AEC is not set
-# CONFIG_UIO_SERCOS3 is not set
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
@@ -3719,12 +3666,11 @@
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
-CONFIG_STAGING=y
-CONFIG_STAGING_EXCLUDE_BUILD=y
+# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ASUS_LAPTOP=m
-# CONFIG_DELL_WMI is not set
+CONFIG_DELL_WMI=m
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_TC1100_WMI=m
@@ -3741,8 +3687,8 @@
CONFIG_THINKPAD_ACPI_BAY=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
-CONFIG_INTEL_MENLOW=m
-CONFIG_EEEPC_LAPTOP=m
+# CONFIG_INTEL_MENLOW is not set
+# CONFIG_EEEPC_LAPTOP is not set
CONFIG_ACPI_WMI=m
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_TOSHIBA=m
@@ -3753,6 +3699,7 @@
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
@@ -3766,21 +3713,26 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y-CONFIG_JBD_DEBUG=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
-CONFIG_FS_MBCACHE=m
+CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
@@ -3788,20 +3740,20 @@
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
-CONFIG_JFS_STATISTICS=y
+# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
+# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
# CONFIG_GFS2_FS_LOCKING_DLM is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
-CONFIG_OCFS2_FS_STATS=y
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_OCFS2_FS_POSIX_ACL is not set
@@ -3811,12 +3763,12 @@
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=m
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=y+# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
@@ -3842,27 +3794,25 @@
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
+# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
@@ -3875,33 +3825,25 @@
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=y
+CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
-CONFIG_HPFS_FS=m
+# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
@@ -3910,8 +3852,9 @@
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
+# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_EXOFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
@@ -3934,8 +3877,7 @@
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
@@ -3953,8 +3895,7 @@
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FS is not set
#
# Partition Types
@@ -3962,25 +3903,24 @@
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
+# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
-CONFIG_ULTRIX_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_SYSV68_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
@@ -4003,7 +3943,7 @@
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
+CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
@@ -4019,7 +3959,7 @@
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
+CONFIG_DLM_DEBUG=y
#
# Kernel hacking
@@ -4027,23 +3967,28 @@
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ALLOW_WARNINGS=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set+CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -4051,35 +3996,34 @@
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
+CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-CONFIG_RCU_TORTURE_TEST=m
+CONFIG_BOOT_PRINTK_DELAY=y
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-CONFIG_LKDTM=m
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not
set-CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -4087,30 +4031,32 @@
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+CONFIG_BUILD_DOCSRC=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
+CONFIG_KGDB=y
+CONFIG_KGDB_SERIAL_CONSOLE=y
+CONFIG_KGDB_TESTS=y
+# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
-# CONFIG_STRICT_DEVMEM is not set
-CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_STRICT_DEVMEM=y
+# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_4KSTACKS is not set
+CONFIG_4KSTACKS=y
CONFIG_DOUBLEFAULT=y
CONFIG_X86_DS_SELFTEST=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
@@ -4123,9 +4069,9 @@
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DEBUG_BOOT_PARAMS is not set
+CONFIG_DEBUG_BOOT_PARAMS=y+CONFIG_OPTIMIZE_INLINING=y
#
# Security options
@@ -4135,18 +4081,20 @@
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
+CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_XOR_BLOCKS=m
@@ -4158,7 +4106,7 @@
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
@@ -4175,7 +4123,7 @@
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
@@ -4207,15 +4155,15 @@
# Digest
#
CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CRC32C_INTEL is not set
+CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
@@ -4240,7 +4188,7 @@
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_TWOFISH is not set
+CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
@@ -4248,27 +4196,30 @@
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_DEV_PADLOCK=m
-CONFIG_CRYPTO_DEV_PADLOCK_AES=m
-CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_GEODE=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
-# CONFIG_KVM is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTIO_BALLOON is not set
-CONFIG_BINARY_PRINTF=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_TRACE=y
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -4279,10 +4230,10 @@
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
-CONFIG_CRC7=m
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
</CODE>
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Wed, 22 Jul 2009 20:32:33 +0300
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Thu, Jul 23, 2009 at 01:17:23AM +0800, Teo En Ming (Zhang Enming) wrote:
> Dear Pasik,
>
> This morning when I go to office i will examine the differences between
> your .config and my .config using diff and create a patch. I will then
> look through the generated patch file and patch my .config accordingly.
>
Yep.
Just remember my .config is a mess; it's originally based on some Fedora 10
default kernel, and then changed many times after that..
But it works for me :)
I've been compiling and running on Fedora 10 and Fedora 11, using Xen 3.3.1
and Xen 3.4.0.
-- Pasi
> Regards,
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
> Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> Teo En Ming (Zhang Enming) wrote:
> >Hi Pasik
> >
> >I suspect that the Z0_startup_32 error has something to do with
> >compiling 32-bit xen kernels. The problem may not appear when
> >compiling 64-bit xen kernels.
> >
> >Pasi Kärkkäinen wrote:
> >>On Wed, Jul 22, 2009 at 07:04:48PM +0300, Pasi Kärkkäinen wrote:
> >>
> >>>On Wed, Jul 22, 2009 at 11:47:11PM +0800, Teo En Ming wrote:
> >>>
> >>>>OOOPS! I still got an error compiling the kernel image. Please advise.
> >>>>See console output below.
> >>>>
> >>>>
>
>>>http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.30-rc6-tip-next-no-highpte
[http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.30-rc6-tip-next-no-highpte]
> >>>
> >>>That's some random .config from me.. it should work. It works for me.
> >>>
> >>>
> >>
> >>I was using that .config with xen-tip/next pv_ops dom0 kernel.
> >>
> >>-- Pasi
> >>
> >>_______________________________________________
> >>Xen-devel mailing list
> >>Xen-devel@lists.xensource.com
> >>http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> >>
> >
> >------------------------------------------------------------------------
> >
> >
> >No virus found in this outgoing message.
> >Checked by AVG - www.avg.com [http://www.avg.com/]
> >Version: 8.5.392 / Virus Database: 270.13.20/2251 - Release Date:
07/20/09
> >18:29:00
> >
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >Xen-devel mailing list
> >Xen-devel@lists.xensource.com
> >http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> >
>
>
> No virus found in this outgoing message.
> Checked by AVG - www.avg.com [http://www.avg.com/]
> Version: 8.5.392 / Virus Database: 270.13.20/2251 - Release Date: 07/20/09
18:29:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 136887 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-23 2:21 ` Teo En Ming
@ 2009-07-23 2:42 ` Teo En Ming
2009-07-23 3:27 ` Teo En Ming
1 sibling, 0 replies; 86+ messages in thread
From: Teo En Ming @ 2009-07-23 2:42 UTC (permalink / raw)
To: Teo En Ming, Pasi Kärkkäinen; +Cc: xen-devel, jeremy.fitzhardinge
[-- Attachment #1.1: Type: text/plain, Size: 115368 bytes --]
Dear Pasik,
Success in compiling the Xen Dom 0 paravirt ops enabled kernel!
<CODE>
LD Documentation/video4linux/built-in.o
HOSTCC Documentation/video4linux/v4lgrab
LD Documentation/vm/built-in.o
HOSTCC Documentation/vm/slabinfo
LD Documentation/watchdog/src/built-in.o
HOSTCC Documentation/watchdog/src/watchdog-simple
HOSTCC Documentation/watchdog/src/watchdog-test
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
CC arch/x86/boot/a20.o
AS arch/x86/boot/bioscall.o
CC arch/x86/boot/cmdline.o
AS arch/x86/boot/copy.o
HOSTCC arch/x86/boot/mkcpustr
CPUSTR arch/x86/boot/cpustr.h
CC arch/x86/boot/cpu.o
CC arch/x86/boot/cpucheck.o
CC arch/x86/boot/edd.o
VOFFSET arch/x86/boot/voffset.h
LDS arch/x86/boot/compressed/vmlinux.lds
AS arch/x86/boot/compressed/head_32.o
CC arch/x86/boot/compressed/misc.o
OBJCOPY arch/x86/boot/compressed/vmlinux.bin
HOSTCC arch/x86/boot/compressed/relocs
RELOCS arch/x86/boot/compressed/vmlinux.relocs
GZIP arch/x86/boot/compressed/vmlinux.bin.gz
HOSTCC arch/x86/boot/compressed/mkpiggy
MKPIGGY arch/x86/boot/compressed/piggy.S
AS arch/x86/boot/compressed/piggy.o
LD arch/x86/boot/compressed/vmlinux
ZOFFSET arch/x86/boot/zoffset.h
AS arch/x86/boot/header.o
CC arch/x86/boot/main.o
CC arch/x86/boot/mca.o
CC arch/x86/boot/memory.o
CC arch/x86/boot/pm.o
AS arch/x86/boot/pmjump.o
CC arch/x86/boot/printf.o
CC arch/x86/boot/regs.o
CC arch/x86/boot/string.o
CC arch/x86/boot/tty.o
CC arch/x86/boot/video.o
CC arch/x86/boot/video-mode.o
CC arch/x86/boot/version.o
CC arch/x86/boot/apm.o
CC arch/x86/boot/video-vga.o
CC arch/x86/boot/video-vesa.o
CC arch/x86/boot/video-bios.o
LD arch/x86/boot/setup.elf
OBJCOPY arch/x86/boot/setup.bin
OBJCOPY arch/x86/boot/vmlinux.bin
HOSTCC arch/x86/boot/tools/build
BUILD arch/x86/boot/bzImage
Root device is (8, 2)
Setup is 13932 bytes (padded to 14336 bytes).
System is 2784 kB
CRC 17b52ba1
Kernel: arch/x86/boot/bzImage is ready (#4)
</CODE>
Thank you!!!
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Thu, 23 Jul 2009 10:21:39 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Dear Pasik,
I just did a diff this morning. Here are the differences between my
kernel configuration and your kernel configuration.
<CODE>
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
-CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEM_RES_CTLR=y
-# CONFIG_CGROUP_MEM_RES_CTLR_SWAP is not set
-CONFIG_MM_OWNER=y
+# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
@@ -135,7 +131,7 @@
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -158,15 +154,15 @@
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
-CONFIG_OPROFILE=m
-# CONFIG_OPROFILE_IBS is not set
+# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -182,10 +178,10 @@
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
+# CONFIG_MODULE_FORCE_LOAD is not setCONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
@@ -205,24 +201,24 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
-# CONFIG_SPARSE_IRQ is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_RDC321X is not set
-CONFIG_X86_32_NON_STANDARD=y
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
+# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
@@ -235,25 +231,24 @@
CONFIG_XEN_PRIVILEGED_GUEST=y
# CONFIG_XEN_PCI_PASSTHROUGH_DEBUG is not set
CONFIG_MICROCODE_XEN=y
-# CONFIG_VMI is not set
+CONFIG_VMI=y
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
-# CONFIG_PARAVIRT_SPINLOCKS is not set
+CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_MEMTEST is not set
-CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
-CONFIG_M686=y
+# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
-# CONFIG_MPENTIUM4 is not set
+CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
@@ -274,9 +269,8 @@
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=5
+CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
-CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
@@ -296,21 +290,24 @@
CONFIG_CPU_SUP_UMC_32=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
-# CONFIG_HPET_TIMER is not set
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=8
-# CONFIG_SCHED_SMT is not set
+CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
-# CONFIG_X86_MCE is not set
+CONFIG_X86_MCE=y
+# CONFIG_X86_MCE_NONFATAL is not set
+CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
@@ -350,7 +347,7 @@
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_MMU_NOTIFIER=y
-# CONFIG_HIGHPTE is not set
+CONFIG_HIGHPTE=n
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
@@ -359,23 +356,23 @@
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
-# CONFIG_EFI is not set
+CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
+# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x1000000
+CONFIG_CRASH_DUMP=y
+CONFIG_PHYSICAL_START=0x400000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
-CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_PHYSICAL_ALIGN=0x400000
CONFIG_HOTPLUG_CPU=y
-CONFIG_COMPAT_VDSO=y
+# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -383,10 +380,15 @@
# Power management and ACPI options
#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_TRACE=y
+CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
@@ -395,32 +397,75 @@
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y-CONFIG_ACPI_AC=m
-CONFIG_ACPI_BATTERY=m
-CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
-CONFIG_ACPI_FAN=m
+CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_THERMAL=m
-CONFIG_ACPI_CUSTOM_DSDT_FILE=""
+CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=2001
-CONFIG_ACPI_DEBUG=y
-# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
+CONFIG_ACPI_BLACKLIST_YEAR=1999
+# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
-CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=m
-# CONFIG_APM is not set
+CONFIG_X86_APM_BOOT=y
+CONFIG_APM=y
+# CONFIG_APM_IGNORE_USER_SUSPEND is not set
+# CONFIG_APM_DO_ENABLE is not set
+CONFIG_APM_CPU_IDLE=y
+# CONFIG_APM_DISPLAY_BLANK is not set
+# CONFIG_APM_ALLOW_INTS is not set
#
# CPU Frequency scaling
#
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m+
+#
+# CPUFreq processor drivers
+#
+CONFIG_X86_ACPI_CPUFREQ=m
+# CONFIG_X86_POWERNOW_K6 is not set
+CONFIG_X86_POWERNOW_K7=y
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+# CONFIG_X86_GX_SUSPMOD is not set
+# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
+CONFIG_X86_SPEEDSTEP_ICH=y
+CONFIG_X86_SPEEDSTEP_SMI=y
+CONFIG_X86_P4_CLOCKMOD=m
+# CONFIG_X86_CPUFREQ_NFORCE2 is not set
+CONFIG_X86_LONGRUN=y
+# CONFIG_X86_LONGHAUL is not set
+CONFIG_X86_E_POWERSAVER=y
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=y
+# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
@@ -451,15 +496,15 @@
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
-# CONFIG_ISA is not set
+CONFIG_ISA=y
+# CONFIG_EISA is not set
# CONFIG_MCA is not set
-CONFIG_SCx200=m
-CONFIG_SCx200HR_TIMER=m
+# CONFIG_SCx200 is not set
CONFIG_OLPC=y
CONFIG_K8_NB=y
-CONFIG_PCCARD=m
+CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
@@ -475,17 +520,19 @@
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
+CONFIG_I82365=m
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_IBM is not set
-CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
-CONFIG_HOTPLUG_PCI_CPCI=y
-CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
-CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
-CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
@@ -493,22 +540,22 @@
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
-CONFIG_PACKET=m
+CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
@@ -561,12 +608,12 @@
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
+CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
@@ -582,8 +629,9 @@
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -596,7 +644,7 @@
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
@@ -615,8 +663,8 @@
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
@@ -628,6 +676,7 @@
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
@@ -637,7 +686,7 @@
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_DCCP=m@@ -657,9 +706,11 @@
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
@@ -701,17 +752,17 @@
#
# IP: Netfilter Configuration
#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
@@ -766,7 +817,7 @@
#
# DECnet: Netfilter Configuration
#
-CONFIG_DECNET_NF_GRABULATOR=m
+# CONFIG_DECNET_NF_GRABULATOR is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -805,19 +856,21 @@
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
-# CONFIG_NET_DCCPPROBE is not set
+CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set-# CONFIG_TIPC is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
-CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
+# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_STP=m
@@ -829,21 +882,21 @@
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
-CONFIG_LLC2=m
+# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
+# CONFIG_LTPC is not set
+# CONFIG_COPS is not set
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
-CONFIG_X25=m
-CONFIG_LAPB=m
-CONFIG_ECONET=m
-# CONFIG_ECONET_AUNUDP is not set
-# CONFIG_ECONET_NATIVE is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
+CONFIG_PHONET=m
CONFIG_NET_SCHED=y
#
@@ -881,7 +934,13 @@
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_CLS_CGROUP is not set
-# CONFIG_NET_EMATCH is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m@@ -892,7 +951,7 @@
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
-# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
@@ -900,7 +959,7 @@
# Network testing
#
CONFIG_NET_PKTGEN=m
-CONFIG_NET_TCPPROBE=m
+# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
@@ -918,6 +977,9 @@
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
+CONFIG_SCC=m
+# CONFIG_SCC_DELAY is not set
+CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
@@ -940,13 +1002,13 @@
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
+# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
+CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
@@ -1017,14 +1079,12 @@
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
-CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-CONFIG_RXKAD=m
+# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not
set+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
@@ -1057,14 +1117,14 @@
#
# Generic Driver Options
#
-CONFIG_UEVENT_HELPER_PATH=""
-# CONFIG_STANDALONE is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_DEBUG_DEVRES=y
CONFIG_SYS_HYPERVISOR=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
@@ -1083,15 +1143,15 @@
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
-CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
CONFIG_RFD_FTL=m
-# CONFIG_SSFDC is not set
+CONFIG_SSFDC=m
CONFIG_MTD_OOPS=m
#
@@ -1100,11 +1160,7 @@
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y@@ -1115,49 +1171,43 @@
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
-CONFIG_MTD_SBC_GXX=m
-CONFIG_MTD_SCx200_DOCFLASH=m
-CONFIG_MTD_AMD76XROM=m
-CONFIG_MTD_ICHXROM=m
+# CONFIG_MTD_SBC_GXX is not set
+# CONFIG_MTD_AMD76XROM is not set
+# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
-CONFIG_MTD_NETtel=m
-CONFIG_MTD_DILNETPC=m
-CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
-CONFIG_MTD_L440GX=m
+# CONFIG_MTD_NETtel is not set
+# CONFIG_MTD_DILNETPC is not set
+# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
-CONFIG_MTD_INTEL_VR_NOR=m
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
-CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
@@ -1166,15 +1216,9 @@
#
# Disk-On-Chip Device Drivers
#
-CONFIG_MTD_DOC2000=m
-CONFIG_MTD_DOC2001=m
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-CONFIG_MTD_DOCPROBE_ADVANCED=y
-CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
-CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_DOCPROBE_55AA=y
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
@@ -1183,17 +1227,13 @@
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
-# CONFIG_MTD_NAND_CS553X is not set
+CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
+# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ALAUDA=m
-CONFIG_MTD_ONENAND=m
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-CONFIG_MTD_ONENAND_OTP=y
-CONFIG_MTD_ONENAND_2X_PROGRAM=y
-CONFIG_MTD_ONENAND_SIM=m
+# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
@@ -1215,11 +1255,11 @@
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_PC_SUPERIO=y
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
@@ -1228,9 +1268,12 @@
#
# Protocols
#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
+# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE=m
#
@@ -1267,116 +1310,50 @@
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=64000
-CONFIG_BLK_DEV_XIP=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
-CONFIG_CDROM_PKTCDVD_WCACHE=y
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=y
+CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
-CONFIG_PHANTOM=m
+# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
-# CONFIG_ICS932S401 is not set
+CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HP_ILO=m
# CONFIG_DELL_LAPTOP is not set
# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
+CONFIG_C2PORT=m
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_93CX6=m
CONFIG_HAVE_IDE=y
-CONFIG_IDE=m
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=m
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-CONFIG_BLK_DEV_IDECS=m
-CONFIG_BLK_DEV_DELKIN=m
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEACPI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-CONFIG_BLK_DEV_PLATFORM=m
-CONFIG_BLK_DEV_CMD640=m
-CONFIG_BLK_DEV_CMD640_ENHANCED=y
-CONFIG_BLK_DEV_IDEPNP=m
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_BLK_DEV_OFFBOARD=y
-CONFIG_BLK_DEV_GENERIC=m
-CONFIG_BLK_DEV_OPTI621=m
-CONFIG_BLK_DEV_RZ1000=m
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-CONFIG_BLK_DEV_AEC62XX=m
-CONFIG_BLK_DEV_ALI15X3=m
-CONFIG_BLK_DEV_AMD74XX=m
-CONFIG_BLK_DEV_ATIIXP=m
-CONFIG_BLK_DEV_CMD64X=m
-CONFIG_BLK_DEV_TRIFLEX=m
-CONFIG_BLK_DEV_CS5520=m-# CONFIG_BLK_DEV_CS5536 is not set
-CONFIG_BLK_DEV_HPT366=m
-CONFIG_BLK_DEV_JMICRON=m
-CONFIG_BLK_DEV_SC1200=m
-CONFIG_BLK_DEV_PIIX=m
-# CONFIG_BLK_DEV_IT8172 is not set
-CONFIG_BLK_DEV_IT8213=m
-CONFIG_BLK_DEV_IT821X=m
-CONFIG_BLK_DEV_NS87415=m
-CONFIG_BLK_DEV_PDC202XX_OLD=m
-CONFIG_BLK_DEV_PDC202XX_NEW=m
-CONFIG_BLK_DEV_SVWKS=m
-CONFIG_BLK_DEV_SIIMAGE=m
-CONFIG_BLK_DEV_SIS5513=m
-CONFIG_BLK_DEV_SLC90E66=m
-CONFIG_BLK_DEV_TRM290=m
-CONFIG_BLK_DEV_VIA82CXXX=m
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
+CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
@@ -1385,12 +1362,12 @@
#
# SCSI support type (disk, tape, CD-ROM)
#
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
@@ -1400,7 +1377,7 @@
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
-CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-CONFIG_SCSI_CXGB3_ISCSI=m
+# CONFIG_SCSI_CXGB3_ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
+# CONFIG_SCSI_7000FASST is not set
CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AHA152X=m
+# CONFIG_SCSI_AHA1542 is not set
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
-CONFIG_AIC7XXX_RESET_DELAY_MS=5000
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=32
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
-CONFIG_AIC79XX_REG_PRETTY_PRINT=y
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
-CONFIG_AIC94XX_DEBUG=y
-CONFIG_SCSI_DPT_I2O=m
+# CONFIG_AIC94XX_DEBUG is not set
+# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=m
+# CONFIG_SCSI_IN2000 is not set
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
@@ -1448,20 +1429,22 @@
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
-# CONFIG_SCSI_MPT2SAS is not set
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m-CONFIG_FCOE=m
-CONFIG_SCSI_DMX3191D=m
-CONFIG_SCSI_EATA=m
-CONFIG_SCSI_EATA_TAGGED_QUEUE=y
-CONFIG_SCSI_EATA_LINKED_COMMANDS=y
-CONFIG_SCSI_EATA_MAX_TAGS=16
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
@@ -1470,23 +1453,28 @@
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_IPR=m
-CONFIG_SCSI_IPR_TRACE=y
-CONFIG_SCSI_IPR_DUMP=y
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+# CONFIG_SCSI_SYM53C416 is not set
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
-CONFIG_SCSI_NSP32=m
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_SRP=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
@@ -1494,21 +1482,24 @@
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
-CONFIG_SCSI_DH=m CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
-# CONFIG_SCSI_OSD_INITIATOR is not set
-CONFIG_ATA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=m
+CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
-CONFIG_ATA_PIIX=m
+CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
@@ -1539,10 +1530,12 @@
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
-# CONFIG_PATA_HPT3X3_DMA is not set
+CONFIG_PATA_HPT3X3_DMA=y
+# CONFIG_PATA_ISAPNP is not set
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
+# CONFIG_PATA_LEGACY is not set
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
@@ -1555,15 +1548,17 @@
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
-CONFIG_PATA_RADISYS=m
-CONFIG_PATA_RZ1000=m
-CONFIG_PATA_SC1200=m
+CONFIG_PATA_QDI=m
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
+# CONFIG_PATA_WINBOND_VLB is not set
CONFIG_PATA_SCH=m
CONFIG_MD=y CONFIG_MD_RAID6_PQ=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_DELAY=m
+# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
-CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
-# CONFIG_FUSION_LOGGING is not set
+CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
@@ -1601,20 +1596,13 @@
#
# Enable only one of the two stacks, unless you know what you
are doing
#
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=m
-CONFIG_IEEE1394_OHCI1394=m
-CONFIG_IEEE1394_PCILYNX=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_DV1394=m
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_SBP2=m
+# CONFIG_IEEE1394 is not set
CONFIG_I2O=m
-CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
@@ -1623,7 +1611,8 @@
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
-# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_IFB=m
@@ -1634,15 +1623,7 @@
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_NET_SB1000=m
-CONFIG_ARCNET=m
-CONFIG_ARCNET_1201=m
-CONFIG_ARCNET_1051=m
-CONFIG_ARCNET_RAW=m
-CONFIG_ARCNET_CAP=m
-CONFIG_ARCNET_COM90xx=m
-CONFIG_ARCNET_COM90xxIO=m
-CONFIG_ARCNET_RIM_I=m
-# CONFIG_ARCNET_COM20020 is not set
+# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
@@ -1662,32 +1643,52 @@
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MDIO_BITBANG=m
-# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
+# CONFIG_EL1 is not set
+# CONFIG_EL2 is not set
+# CONFIG_ELPLUS is not set
+# CONFIG_EL16 is not set
+CONFIG_EL3=m
+# CONFIG_3C515 is not set
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
-CONFIG_ENC28J60=m
-# CONFIG_ENC28J60_WRITEVERIFY is not set
-# CONFIG_ETHOC is not set
+# CONFIG_LANCE is not set
+CONFIG_NET_VENDOR_SMC=y
+CONFIG_ULTRA=m
+# CONFIG_SMC9194 is not set
+CONFIG_ETHOC=m
+# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-CONFIG_TULIP_NAPI=y
-CONFIG_TULIP_NAPI_HW_MITIGATION=y
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
-CONFIG_HP100=m
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+CONFIG_EWRK3=m
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=m
+# CONFIG_ZNET is not set
+# CONFIG_SEEQ8005 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -1699,12 +1700,15 @@
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
+# CONFIG_CS89x0 is not set
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
@@ -1723,7 +1727,7 @@
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
-# CONFIG_VIA_RHINE_MMIO is not set
+CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
@@ -1738,7 +1742,7 @@
CONFIG_E1000E=m
CONFIG_IP1000=m CONFIG_IGB=m
-# CONFIG_IGBVF is not set
+CONFIG_IGBVF=m
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
@@ -1756,55 +1760,52 @@
CONFIG_ATL1=m
CONFIG_ATL1E=m
# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
+CONFIG_JME=m
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=m
-# CONFIG_ENIC is not set
+CONFIG_ENIC=m
CONFIG_IXGBE=m
CONFIG_IXGB=m
CONFIG_S2IO=m
CONFIG_MYRI10GE=m
CONFIG_NIU=m
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
-# CONFIG_QLGE is not set
-CONFIG_SFC=m
-CONFIG_SFC_MTD=y
-# CONFIG_BE2NET is not set
+CONFIG_QLGE=m
+# CONFIG_SFC is not set
+CONFIG_BE2NET=m
CONFIG_TR=y
+# CONFIG_IBMTR is not set
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
-CONFIG_TMS380TR=m
-CONFIG_TMSPCI=m
-CONFIG_ABYSS=m
+# CONFIG_TMS380TR is not set
+# CONFIG_SMCTR is not set
#
# Wireless LAN
#
-CONFIG_WLAN_PRE80211=y
-CONFIG_STRIP=m
-CONFIG_PCMCIA_WAVELAN=m
-CONFIG_PCMCIA_NETWAVE=m-CONFIG_PCMCIA_RAYCS=m
+# CONFIG_PCMCIA_RAYCS is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_LIBERTAS_DEBUG=y
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
-# CONFIG_AT76C50X_USB is not set
+CONFIG_AT76C50X_USB=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
@@ -1814,17 +1815,17 @@
CONFIG_RTL8187=m
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
-# CONFIG_MWL8K is not set
+CONFIG_MWL8K=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
-# CONFIG_P54_SPI is not set
CONFIG_P54_LEDS=y
CONFIG_ATH5K=m
-# CONFIG_ATH5K_DEBUG is not set
+CONFIG_ATH5K_DEBUG=y
CONFIG_ATH9K=m
# CONFIG_ATH9K_DEBUG is not set
-# CONFIG_AR9170_USB is not set
+CONFIG_AR9170_USB=m
+CONFIG_AR9170_LEDS=y
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
@@ -1840,7 +1841,8 @@
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLWIFI_RFKILL=y
# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT is not set
-# CONFIG_IWLWIFI_DEBUG is not set
+CONFIG_IWLWIFI_DEBUG=y
+CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWLAGN=m
CONFIG_IWL4965=y
CONFIG_IWL5000=y
@@ -1859,13 +1861,14 @@
CONFIG_B43_PIO=y
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
-# CONFIG_B43_DEBUG is not set+CONFIG_B43_DEBUG=y
+# CONFIG_B43_FORCE_PIO is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_RFKILL=y
-# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
@@ -1896,9 +1899,9 @@
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_DM9601=m
-# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
@@ -1923,63 +1926,40 @@
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_PCMCIA_IBMTR=m
-CONFIG_WAN=y
-CONFIG_LANMEDIA=m
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-CONFIG_HDLC_X25=m
-CONFIG_PCI200SYN=m
-CONFIG_WANXL=m
-CONFIG_PC300TOO=m
-CONFIG_FARSYNC=m
-# CONFIG_DSCC4 is not set
-CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
-# CONFIG_WAN_ROUTER_DRIVERS is not set
-CONFIG_LAPBETHER=m
-CONFIG_X25_ASY=m
-# CONFIG_SBNI is not set
+# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
-CONFIG_ATM_DUMMY=m
+# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m-CONFIG_ATM_ZATM=m
-# CONFIG_ATM_ZATM_DEBUG is not set
+# CONFIG_ATM_ZATM is not set
CONFIG_ATM_NICSTAR=m
-CONFIG_ATM_NICSTAR_USE_SUNI=y
-CONFIG_ATM_NICSTAR_USE_IDT77105=y
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
-CONFIG_ATM_IDT77252_RCV_ALL=y
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
-CONFIG_ATM_IA=m
-# CONFIG_ATM_IA_DEBUG is not set
+# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=m
-CONFIG_ATM_FORE200E_USE_TASKLET=y
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
-CONFIG_ATM_HE_USE_SUNI=y
+# CONFIG_ATM_HE_USE_SUNI is not set
# CONFIG_ATM_SOLOS is not set
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
-CONFIG_HIPPI=y
-CONFIG_ROADRUNNER=m
-CONFIG_ROADRUNNER_LARGE_RINGS=y
+# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
@@ -1987,7 +1967,7 @@
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
@@ -1996,23 +1976,23 @@
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_VIRTIO_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
+# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
-CONFIG_ISDN_X25=y
#
# ISDN feature submodules
@@ -2033,9 +2013,9 @@
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
-# CONFIG_HISAX_NO_SENDCOMPLETE is not set
-# CONFIG_HISAX_NO_LLC is not set
-# CONFIG_HISAX_NO_KEYPAD is not set
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
@@ -2043,17 +2023,27 @@
#
# HiSax supported cards
#
+# CONFIG_HISAX_16_0 is not set
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
+# CONFIG_HISAX_AVM_A1 is not set
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
+# CONFIG_HISAX_IX1MICROR2 is not set
CONFIG_HISAX_DIEHLDIVA=y
+# CONFIG_HISAX_ASUSCOM is not set
+# CONFIG_HISAX_TELEINT is not set
+# CONFIG_HISAX_HFCS is not set
CONFIG_HISAX_SEDLBAUER=y
+# CONFIG_HISAX_SPORTSTER is not set
+# CONFIG_HISAX_MIC is not set
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
+# CONFIG_HISAX_ISURF is not set
+# CONFIG_HISAX_HSTSAPHIR is not set
CONFIG_HISAX_BKM_A4T=y CONFIG_HISAX_GAZEL=y
@@ -2061,7 +2051,7 @@
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
-CONFIG_HISAX_DEBUG=y
+# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
@@ -2075,7 +2065,7 @@
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
+# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
@@ -2083,6 +2073,10 @@
#
# Active cards
#
+# CONFIG_ISDN_DRV_ICN is not set
+# CONFIG_ISDN_DRV_PCBIT is not set
+# CONFIG_ISDN_DRV_SC is not set
+# CONFIG_ISDN_DRV_ACT2000 is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_ISDN_DRV_GIGASET=m
@@ -2090,10 +2084,10 @@
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
-CONFIG_GIGASET_UNDOCREQ=y
+# CONFIG_GIGASET_UNDOCREQ is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
+# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
@@ -2104,8 +2098,10 @@
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
+# CONFIG_ISDN_DRV_AVMB1_B1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+# CONFIG_ISDN_DRV_AVMB1_T1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
@@ -2117,20 +2113,20 @@
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m-CONFIG_PHONE=m
+# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
+CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
@@ -2143,12 +2139,11 @@
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_KEYBOARD_NEWTON=m
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
@@ -2158,12 +2153,14 @@
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_PS2_OLPC is not set
+CONFIG_MOUSE_PS2_OLPC=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_GPIO=m
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
@@ -2193,6 +2190,7 @@
CONFIG_JOYSTICK_XPAD=m+# CONFIG_JOYSTICK_WALKERA0701 is not
set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
@@ -2200,10 +2198,7 @@
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
@@ -2212,13 +2207,11 @@
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
+# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
@@ -2243,19 +2236,18 @@
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
-# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_CT82C710=m
-CONFIG_SERIO_PARKBD=m
-CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
@@ -2272,94 +2264,100 @@
CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
+# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_COMPUTONE=m
+# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
-CONFIG_CYZ_INTR=y
-CONFIG_DIGIEPCA=m
-CONFIG_MOXA_INTELLIO=m
-CONFIG_MOXA_SMARTIO=m
-CONFIG_ISI=m
+# CONFIG_CYZ_INTR is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
-CONFIG_RISCOM8=m
-CONFIG_SPECIALIX=m
-CONFIG_SX=m
-CONFIG_RIO=m
-CONFIG_RIO_OLDPCI=y
-CONFIG_STALDRV=y
-# CONFIG_STALLION is not set
-# CONFIG_ISTALLION is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
CONFIG_NOZOMI=m
#
# Serial drivers
#
-CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_PCI=m
-CONFIG_SERIAL_8250_PNP=m
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=16
-CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
+# CONFIG_SERIAL_8250_FOURPORT is not set+# CONFIG_SERIAL_8250_BOCA
is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_CORE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=0
+# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
+CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
+CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
-CONFIG_IPMI_PANIC_EVENT=y
-CONFIG_IPMI_PANIC_STRING=y
+# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
-CONFIG_NVRAM=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=y
+CONFIG_DTLK=m
CONFIG_R3964=m
-CONFIG_APPLICOM=m
+# CONFIG_APPLICOM is not set
CONFIG_SONYPI=m
#
# PCMCIA character devices
# CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
-CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=4096
-# CONFIG_HPET is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_HPET=y
+# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
@@ -2400,16 +2398,15 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
-CONFIG_I2C_GPIO=m
-CONFIG_I2C_OCORES=m
-# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SIMTEC=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_TAOS_EVM=m
+# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
#
@@ -2420,75 +2417,36 @@
#
# Other I2C/SMBus bus drivers
#
+CONFIG_I2C_PCA_ISA=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_STUB=m
-CONFIG_SCx200_I2C=m
-CONFIG_SCx200_I2C_SCL=12
-CONFIG_SCx200_I2C_SDA=13
-CONFIG_SCx200_ACB=m
+# CONFIG_SCx200_ACB is not set
#
# Miscellaneous I2C Chip support
#
-CONFIG_DS1682=m
+# CONFIG_DS1682 is not set+CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_MAX6875=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=m
-CONFIG_SPI_BUTTERFLY=m
-# CONFIG_SPI_GPIO is not set
-CONFIG_SPI_LM70_LLP=m
-
-#
-# SPI Protocol Masters
-#
-CONFIG_SPI_SPIDEV=m
-CONFIG_SPI_TLE62X0=m
+# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-CONFIG_GPIO_MAX732X=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_GPIO_PCF857X=m
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-CONFIG_GPIO_MAX7301=m
-CONFIG_GPIO_MCP23S08=m
+# CONFIG_GPIOLIB is not set
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#+# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
-CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
@@ -2499,33 +2457,32 @@
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
-# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=m
-CONFIG_BATTERY_DS2760=m
-CONFIG_BATTERY_OLPC=m
-# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_OLPC=y
+CONFIG_BATTERY_BQ27x00=m
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
-CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
-# CONFIG_SENSORS_ADT7462 is not set
+CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7473=m
-# CONFIG_SENSORS_ADT7475 is not set
+CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
-# CONFIG_SENSORS_ATK0110 is not set
+CONFIG_SENSORS_ATK0110=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
@@ -2535,7 +2492,7 @@
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_FSCHMD=m
-# CONFIG_SENSORS_G760A is not set
+CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m@@ -2543,7 +2500,6 @@
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
@@ -2554,16 +2510,14 @@
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
-# CONFIG_SENSORS_LTC4215 is not set
+CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
+CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
-# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_SMSC47M1=m
@@ -2583,11 +2537,10 @@
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
-# CONFIG_SENSORS_LIS3LV02D is not set
+CONFIG_SENSORS_LIS3LV02D=m
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_THERMAL=m
-CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -2595,37 +2548,43 @@
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
-CONFIG_ACQUIRE_WDT=m
-CONFIG_ADVANTECH_WDT=m
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
-CONFIG_SC520_WDT=m
-CONFIG_EUROTECH_WDT=m
-CONFIG_IB700_WDT=m
+# CONFIG_SC520_WDT is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_IB700_WDT is not set-CONFIG_WAFER_WDT=m
+# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
-# CONFIG_IT87_WDT is not set
+CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
-CONFIG_SC1200_WDT=m
-CONFIG_SCx200_WDT=m
-CONFIG_PC87413_WDT=m
-CONFIG_60XX_WDT=m
-CONFIG_SBC8360_WDT=m
-CONFIG_SBC7240_WDT=m
-CONFIG_CPU5_WDT=m
+# CONFIG_SC1200_WDT is not set
+# CONFIG_PC87413_WDT is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_SBC7240_WDT is not set
+# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
-CONFIG_SMSC37B787_WDT=m
+# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
-# CONFIG_W83697UG_WDT is not set
+CONFIG_W83697UG_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
-CONFIG_SBC_EPX_C3_WATCHDOG=m
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
#
# PCI-based Watchdog Cards
@@ -2660,12 +2619,9 @@
#
CONFIG_MFD_CORE=m
CONFIG_MFD_SM501=m
-CONFIG_MFD_SM501_GPIO=y
-CONFIG_HTC_PASIC3=m
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+CONFIG_MFD_WM8400=m
@@ -2699,14 +2655,10 @@
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
-CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
@@ -2721,42 +2673,80 @@
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_TCM825X=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_SAA7191=m
+# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
+
+#
+# Video improvement chips
+#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
-CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
+# CONFIG_VIDEO_PMS is not set
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
@@ -2786,7 +2776,7 @@
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_MT9M001=m
-# CONFIG_SOC_CAMERA_MT9M111 is not set
+CONFIG_SOC_CAMERA_MT9M111=m
# CONFIG_SOC_CAMERA_MT9T031 is not set
CONFIG_SOC_CAMERA_MT9V022=m
# CONFIG_SOC_CAMERA_TW9910 is not set
@@ -2796,42 +2786,44 @@
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
+CONFIG_USB_M5602=m-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_OV519=m
# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-# CONFIG_VIDEO_HDPVR is not set
+CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
-# CONFIG_VIDEO_CX231XX is not set+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
@@ -2845,7 +2837,7 @@
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
-CONFIG_USB_ZC0301=m
+# CONFIG_USB_ZC0301 is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
@@ -2853,12 +2845,23 @@
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
CONFIG_USB_DSBR=m
CONFIG_USB_SI470X=m
-# CONFIG_USB_MR800 is not set
+CONFIG_USB_MR800=m
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
@@ -2878,32 +2881,7 @@
#
# Supported USB Adapters
#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-# CONFIG_DVB_USB_CXUSB is not set
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_DW2102=m
-# CONFIG_DVB_USB_CINERGY_T2 is not set
-CONFIG_DVB_USB_ANYSEE=m
-# CONFIG_DVB_USB_DTV5100 is not set
-# CONFIG_DVB_USB_AF9015 is not set
-# CONFIG_DVB_USB_CE6230 is not set
+# CONFIG_DVB_USB is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_SIANO_SMS1XXX=m
@@ -2933,11 +2911,6 @@
# CONFIG_DVB_DM1105 is not set
#
-# Supported FireWire (IEEE 1394) Adapters
-#
-# CONFIG_DVB_FIREDTV is not set
-
-#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
@@ -2948,8 +2921,6 @@
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0288=m
-CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
@@ -2961,8 +2932,6 @@
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
-CONFIG_DVB_CX24116=m
-CONFIG_DVB_SI21XX=m
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
@@ -2971,9 +2940,6 @@
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m CONFIG_DVB_S5H1411=m
CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
@@ -2998,17 +2963,17 @@
#
# Graphics support
#
-CONFIG_AGP=m
-CONFIG_AGP_ALI=m
-CONFIG_AGP_ATI=m
-CONFIG_AGP_AMD=m
-CONFIG_AGP_AMD64=m
-CONFIG_AGP_INTEL=m
-CONFIG_AGP_NVIDIA=m
-CONFIG_AGP_SIS=m
-CONFIG_AGP_SWORKS=m
-CONFIG_AGP_VIA=m
-CONFIG_AGP_EFFICEON=m
+CONFIG_AGP=y
+CONFIG_AGP_ALI=y
+CONFIG_AGP_ATI=y
+CONFIG_AGP_AMD=y
+CONFIG_AGP_AMD64=y
+CONFIG_AGP_INTEL=y
+CONFIG_AGP_NVIDIA=y
+CONFIG_AGP_SIS=y
+CONFIG_AGP_SWORKS=y
+CONFIG_AGP_VIA=y
+CONFIG_AGP_EFFICEON=y
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
@@ -3024,7 +2989,7 @@
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
@@ -3037,7 +3002,6 @@
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
@@ -3048,32 +3012,30 @@
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m-CONFIG_FB_CYBER2000=m
-CONFIG_FB_ARC=m
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
-CONFIG_FB_IMSTT=y
+# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
-CONFIG_FB_UVESA=m
+# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
-CONFIG_FB_N411=m
-CONFIG_FB_HGA=m
-CONFIG_FB_HGA_ACCEL=y
-CONFIG_FB_S1D13XXX=m
+CONFIG_FB_EFI=y
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
-CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
-CONFIG_FB_LE80578=m
-CONFIG_FB_CARILLO_RANCH=m
+# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
@@ -3081,13 +3043,15 @@
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
-# CONFIG_FB_MATROX_I2C is not set
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
-CONFIG_FB_SIS=m
-CONFIG_FB_SIS_300=y
-CONFIG_FB_SIS_315=y
-# CONFIG_FB_VIA is not set
+# CONFIG_FB_SIS is not set
+CONFIG_FB_VIA=m
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
-CONFIG_FB_VT8623=m
+# CONFIG_FB_VT8623 is not set
CONFIG_FB_TRIDENT=m
-CONFIG_FB_ARK=m
-CONFIG_FB_PM3=m
-CONFIG_FB_CARMINE=m
-CONFIG_FB_CARMINE_DRAM_EVAL=y
-# CONFIG_CARMINE_DRAM_CUSTOM is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=m
-CONFIG_FB_GEODE_GX=m
-CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_GEODE_LX=y
+CONFIG_FB_GEODE_GX=y
+# CONFIG_FB_GEODE_GX1 is not set
# CONFIG_FB_TMIO is not set
CONFIG_FB_SM501=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=y
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+# CONFIG_FB_MB862XX_PCI_GDC is not set
+CONFIG_FB_BROADSHEET=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_LTV350QV=m
-CONFIG_LCD_ILI9320=m
-# CONFIG_LCD_TDO24M is not set
-CONFIG_LCD_VGG2432A4=m
+# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=m
#
# Display device support
@@ -3154,14 +3111,18 @@
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
@@ -3177,19 +3138,22 @@
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
+CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
+CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTS64=m
@@ -3197,8 +3161,43 @@
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CS4231 is not set
+CONFIG_SND_CS4236=m
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_ES1688 is not set
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+CONFIG_SND_OPL3SA2=m
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_MIRO=m
+# CONFIG_SND_SB8 is not set
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+# CONFIG_SND_SB16_CSP is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_WAVEFRONT is not set
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
@@ -3209,7 +3208,7 @@
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
-CONFIG_SND_AW2=m
+# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
@@ -3220,7 +3219,7 @@
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
-# CONFIG_SND_CS5530 is not set
+CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
@@ -3248,7 +3247,7 @@
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
-CONFIG_SND_HDA_INPUT_BEEP=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
@@ -3287,87 +3286,63 @@
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
-CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
-# CONFIG_SND_USB_US122L is not set
-CONFIG_SND_PCMCIA=y
-CONFIG_SND_VXPOCKET=m
-CONFIG_SND_PDAUDIOCF=m
+CONFIG_SND_USB_US122L=m
+# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
-CONFIG_SOUND_PRIME=m
-CONFIG_SOUND_OSS=m
-CONFIG_SOUND_TRACEINIT=y
-CONFIG_SOUND_DMAP=y
-CONFIG_SOUND_SSCAPE=m
-CONFIG_SOUND_VMIDI=m
-CONFIG_SOUND_TRIX=m
-CONFIG_SOUND_MSS=m
-CONFIG_SOUND_MPU401=m
-CONFIG_SOUND_PAS=m
-CONFIG_SOUND_PSS=m
-CONFIG_PSS_MIXER=y
-# CONFIG_PSS_HAVE_BOOT is not set
-CONFIG_SOUND_SB=m
-CONFIG_SOUND_YM3812=m
-CONFIG_SOUND_UART6850=m
-CONFIG_SOUND_AEDSP16=m
-CONFIG_SC6600=y
-CONFIG_SC6600_JOY=y
-CONFIG_SC6600_CDROM=4
-CONFIG_SC6600_CDROMBASE=0x0-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
-CONFIG_USB_HID=m
+CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=m
-CONFIG_HID_KYE=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_KENSINGTON=m
-CONFIG_HID_LOGITECH=m
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_DRAGONRISE_FF=m
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_NTRIG=m
-CONFIG_HID_PANTHERLORD=m
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
# CONFIG_GREENASIA_FF is not set
-CONFIG_HID_TOPSEED=m
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+CONFIG_HID_TOPSEED=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=m
+CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
@@ -3379,43 +3354,38 @@
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
-CONFIG_USB_MON=m
+CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
-CONFIG_USB_C67X00_HCD=m
-CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
-CONFIG_USB_ISP116X_HCD=m
-CONFIG_USB_ISP1760_HCD=m
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_HCD_SSB is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_U132_HCD is not set
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_SL811_CS is not set
#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
-# CONFIG_USB_TMC is not set
+CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
@@ -3458,7 +3428,7 @@
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP210X is not set
+CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -3468,23 +3438,11 @@
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
+# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
@@ -3501,7 +3459,7 @@
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_SYMBOL=m CONFIG_USB_SERIAL_XIRCOM=m
@@ -3516,14 +3474,14 @@
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
-# CONFIG_USB_SEVSEG is not set
-CONFIG_USB_RIO500=m
+CONFIG_USB_SEVSEG=m
+# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
@@ -3534,7 +3492,7 @@
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
-# CONFIG_USB_VST is not set
+CONFIG_USB_VST=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
@@ -3544,8 +3502,8 @@
#
# OTG and related infrastructure
#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_OTG_UTILS=y
+CONFIG_NOP_USB_XCEIV=m
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
@@ -3557,7 +3515,7 @@
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
-CONFIG_MMC_TEST=m
+# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
@@ -3583,38 +3541,32 @@
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CLASS=y
#
-CONFIG_LEDS_NET48XX=m
-CONFIG_LEDS_WRAP=m
# CONFIG_LEDS_ALIX2 is not set
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_LP5521=m
CONFIG_LEDS_CLEVO_MAIL=m
-CONFIG_LEDS_PCA955X=m
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_BD2802=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_EDAC=y
#
@@ -3628,16 +3580,18 @@
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
-# CONFIG_EDAC_X38 is not set
+CONFIG_EDAC_X38=m
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
+CONFIG_EDAC_AMD8131=m
+CONFIG_EDAC_AMD8111=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
@@ -3645,8 +3599,8 @@
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_TEST=m
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
@@ -3662,34 +3616,27 @@
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
-CONFIG_RTC_DRV_S35390A=m
+# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
-# CONFIG_RTC_DRV_RX8581 is not set
+CONFIG_RTC_DRV_RX8581=m
#
# SPI RTC drivers
#
-CONFIG_RTC_DRV_M41T94=m
-CONFIG_RTC_DRV_DS1305=m
-# CONFIG_RTC_DRV_DS1390 is not set
-CONFIG_RTC_DRV_MAX6902=m
-CONFIG_RTC_DRV_R9701=m
-CONFIG_RTC_DRV_RS5C348=m
-# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
-CONFIG_RTC_DRV_CMOS=m
-# CONFIG_RTC_DRV_DS1286 is not set
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
-CONFIG_RTC_DRV_M48T86=m
-# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
-# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_V3020=m
# CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_SMX=m
-# CONFIG_UIO_AEC is not set
-# CONFIG_UIO_SERCOS3 is not set
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
@@ -3719,12 +3666,11 @@
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
-CONFIG_STAGING=y
-CONFIG_STAGING_EXCLUDE_BUILD=y
+# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ASUS_LAPTOP=m
-# CONFIG_DELL_WMI is not set
+CONFIG_DELL_WMI=m
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_TC1100_WMI=m
@@ -3741,8 +3687,8 @@
CONFIG_THINKPAD_ACPI_BAY=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
-CONFIG_INTEL_MENLOW=m
-CONFIG_EEEPC_LAPTOP=m
+# CONFIG_INTEL_MENLOW is not set
+# CONFIG_EEEPC_LAPTOP is not set
CONFIG_ACPI_WMI=m
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_TOSHIBA=m
@@ -3753,6 +3699,7 @@
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
@@ -3766,21 +3713,26 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y-CONFIG_JBD_DEBUG=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
-CONFIG_FS_MBCACHE=m
+CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
@@ -3788,20 +3740,20 @@
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
-CONFIG_JFS_STATISTICS=y
+# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
+# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
# CONFIG_GFS2_FS_LOCKING_DLM is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
-CONFIG_OCFS2_FS_STATS=y
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_OCFS2_FS_POSIX_ACL is not set
@@ -3811,12 +3763,12 @@
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=m
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=y+# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
@@ -3842,27 +3794,25 @@
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
+# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
@@ -3875,33 +3825,25 @@
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=y
+CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
-CONFIG_HPFS_FS=m
+# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
@@ -3910,8 +3852,9 @@
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
+# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_EXOFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
@@ -3934,8 +3877,7 @@
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
@@ -3953,8 +3895,7 @@
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FS is not set
#
# Partition Types
@@ -3962,25 +3903,24 @@
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
+# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
-CONFIG_ULTRIX_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_SYSV68_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
@@ -4003,7 +3943,7 @@
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
+CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
@@ -4019,7 +3959,7 @@
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
+CONFIG_DLM_DEBUG=y
#
# Kernel hacking
@@ -4027,23 +3967,28 @@
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ALLOW_WARNINGS=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set+CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -4051,35 +3996,34 @@
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
+CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-CONFIG_RCU_TORTURE_TEST=m
+CONFIG_BOOT_PRINTK_DELAY=y
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-CONFIG_LKDTM=m
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not
set-CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -4087,30 +4031,32 @@
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+CONFIG_BUILD_DOCSRC=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
+CONFIG_KGDB=y
+CONFIG_KGDB_SERIAL_CONSOLE=y
+CONFIG_KGDB_TESTS=y
+# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
-# CONFIG_STRICT_DEVMEM is not set
-CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_STRICT_DEVMEM=y
+# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_4KSTACKS is not set
+CONFIG_4KSTACKS=y
CONFIG_DOUBLEFAULT=y
CONFIG_X86_DS_SELFTEST=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
@@ -4123,9 +4069,9 @@
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DEBUG_BOOT_PARAMS is not set
+CONFIG_DEBUG_BOOT_PARAMS=y+CONFIG_OPTIMIZE_INLINING=y
#
# Security options
@@ -4135,18 +4081,20 @@
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
+CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_XOR_BLOCKS=m
@@ -4158,7 +4106,7 @@
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
@@ -4175,7 +4123,7 @@
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
@@ -4207,15 +4155,15 @@
# Digest
#
CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CRC32C_INTEL is not set
+CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
@@ -4240,7 +4188,7 @@
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_TWOFISH is not set
+CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
@@ -4248,27 +4196,30 @@
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_DEV_PADLOCK=m
-CONFIG_CRYPTO_DEV_PADLOCK_AES=m
-CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_GEODE=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
-# CONFIG_KVM is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTIO_BALLOON is not set
-CONFIG_BINARY_PRINTF=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_TRACE=y
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -4279,10 +4230,10 @@
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
-CONFIG_CRC7=m
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
</CODE>
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Wed, 22 Jul 2009 20:32:33 +0300
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
On Thu, Jul 23,
2009 at 01:17:23AM +0800, Teo En Ming (Zhang Enming) wrote:
> Dear Pasik,
>
> This morning when I go to office i will examine the
differences between
> your .config and my .config using diff and create a patch. I
will then
> look through the generated patch file and patch my .config
accordingly.
>
Yep.
Just remember my .config is a mess; it's originally based on some
Fedora 10
default kernel, and then changed many times after that..
But it works for me :)
I've been compiling and running on Fedora 10 and Fedora 11, using
Xen 3.3.1
and Xen 3.4.0.
-- Pasi
> Regards,
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics)
BEng(Hons)(Mechanical
> Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> Teo En Ming (Zhang Enming) wrote:
> >Hi Pasik
> >
> >I suspect that the Z0_startup_32 error has something to
do with
> >compiling 32-bit xen kernels. The problem may not appear
when
> >compiling 64-bit xen kernels.
> >
> >Pasi Kärkkäinen wrote:
> >>On Wed, Jul 22, 2009 at 07:04:48PM +0300, Pasi
Kärkkäinen wrote:
> >>
> >>>On Wed, Jul 22, 2009 at 11:47:11PM +0800, Teo En
Ming wrote:
> >>>
> >>>>OOOPS! I still got an error compiling the
kernel image. Please advise.
> >>>>See console output below.
> >>>>
> >>>>
>
>>>http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.30-rc6-tip-next-no-highpte
[http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.30-rc6-tip-next-no-highpte]
> >>>
> >>>That's some random .config from me.. it should
work. It works for me.
> >>>
> >>>
> >>
> >>I was using that .config with xen-tip/next pv_ops
dom0 kernel.
> >>
> >>-- Pasi
> >>
> >>_______________________________________________
> >>Xen-devel mailing list
> >>Xen-devel@lists.xensource.com
> >>http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> >>
> >
>
>------------------------------------------------------------------------
> >
> >
> >No virus found in this outgoing message.
> >Checked by AVG - www.avg.com [http://www.avg.com/]
> >Version: 8.5.392 / Virus Database: 270.13.20/2251 -
Release Date: 07/20/09
> >18:29:00
> >
> >
>
>------------------------------------------------------------------------
> >
> >_______________________________________________
> >Xen-devel mailing list
> >Xen-devel@lists.xensource.com
> >http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> >
>
>
> No virus found in this outgoing message.
> Checked by AVG - www.avg.com [http://www.avg.com/]
> Version: 8.5.392 / Virus Database: 270.13.20/2251 - Release
Date: 07/20/09 18:29:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 149487 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-23 3:27 ` Teo En Ming
@ 2009-07-23 3:20 ` Teo En Ming
2009-07-23 9:19 ` Teo En Ming
1 sibling, 0 replies; 86+ messages in thread
From: Teo En Ming @ 2009-07-23 3:20 UTC (permalink / raw)
To: Teo En Ming, 'Pasi Kärkkäinen'
Cc: xen-devel, jeremy.fitzhardinge
[-- Attachment #1.1: Type: text/plain, Size: 112541 bytes --]
kernel modules build success!
<CODE>
IHEX2FW firmware/whiteheat_loader.fw
IHEX2FW firmware/whiteheat.fw
IHEX2FW firmware/keyspan_pda/keyspan_pda.fw
IHEX2FW firmware/keyspan_pda/xircom_pgs.fw
H16TOFW firmware/vicam/firmware.fw
IHEX firmware/cpia2/stv0672_vp4.bin
IHEX firmware/yam/1200.bin
IHEX firmware/yam/9600.bin
</CODE>
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "'Teo En Ming'" <enming.teo@asiasoftsea.net>, 'Pasi Kärkkäinen'
<pasik@iki.fi>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Thu, 23 Jul 2009 11:27:38 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Dear Pasik,
Success in compiling the Xen Dom 0 paravirt ops enabled kernel!
<CODE>
LD
Documentation/video4linux/built-in.o
HOSTCC Documentation/video4linux/v4lgrab
LD Documentation/vm/built-in.o
HOSTCC Documentation/vm/slabinfo
LD Documentation/watchdog/src/built-in.o
HOSTCC Documentation/watchdog/src/watchdog-simple
HOSTCC Documentation/watchdog/src/watchdog-test
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
CC arch/x86/boot/a20.o
AS arch/x86/boot/bioscall.o
CC arch/x86/boot/cmdline.o
AS arch/x86/boot/copy.o
HOSTCC arch/x86/boot/mkcpustr
CPUSTR arch/x86/boot/cpustr.h
CC arch/x86/boot/cpu.o
CC arch/x86/boot/cpucheck.o
CC arch/x86/boot/edd.o
VOFFSET arch/x86/boot/voffset.h
LDS arch/x86/boot/compressed/vmlinux.lds
AS arch/x86/boot/compressed/head_32.o
CC arch/x86/boot/compressed/misc.o
OBJCOPY arch/x86/boot/compressed/vmlinux.bin
HOSTCC arch/x86/boot/compressed/relocs
RELOCS arch/x86/boot/compressed/vmlinux.relocs
GZIP arch/x86/boot/compressed/vmlinux.bin.gz
HOSTCC arch/x86/boot/compressed/mkpiggy
MKPIGGY arch/x86/boot/compressed/piggy.S
AS arch/x86/boot/compressed/piggy.o
LD arch/x86/boot/compressed/vmlinux
ZOFFSET arch/x86/boot/zoffset.h
AS arch/x86/boot/header.o
CC arch/x86/boot/main.o
CC arch/x86/boot/mca.o
CC arch/x86/boot/memory.o
CC arch/x86/boot/pm.o
AS arch/x86/boot/pmjump.o
CC arch/x86/boot/printf.o
CC arch/x86/boot/regs.o
CC arch/x86/boot/string.o
CC arch/x86/boot/tty.o
CC arch/x86/boot/video.o
CC arch/x86/boot/video-mode.o
CC arch/x86/boot/version.o
CC arch/x86/boot/apm.o
CC arch/x86/boot/video-vga.o
CC arch/x86/boot/video-vesa.o
CC arch/x86/boot/video-bios.o
LD arch/x86/boot/setup.elf
OBJCOPY arch/x86/boot/setup.bin
OBJCOPY arch/x86/boot/vmlinux.bin
HOSTCC arch/x86/boot/tools/build
BUILD arch/x86/boot/bzImage
Root device is (8, 2)
Setup is 13932 bytes (padded to 14336 bytes).
System is 2784 kB
CRC 17b52ba1
Kernel: arch/x86/boot/bzImage is ready (#4)
</CODE>
Thank you!!!
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore
529541
Republic
of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Thu, 23 Jul 2009 10:21:39 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Dear Pasik,
I just did a diff this morning. Here are the differences between my
kernel configuration and your kernel configuration.
<CODE>
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
-CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEM_RES_CTLR=y
-# CONFIG_CGROUP_MEM_RES_CTLR_SWAP is not set
-CONFIG_MM_OWNER=y
+# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
@@ -135,7 +131,7 @@
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -158,15 +154,15 @@
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
-CONFIG_OPROFILE=m
-# CONFIG_OPROFILE_IBS is not set
+# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -182,10 +178,10 @@
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
@@ -205,24 +201,24 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
-# CONFIG_SPARSE_IRQ is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_RDC321X is not set
-CONFIG_X86_32_NON_STANDARD=y
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
+# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
@@ -235,25 +231,24 @@
CONFIG_XEN_PRIVILEGED_GUEST=y
# CONFIG_XEN_PCI_PASSTHROUGH_DEBUG is not set
CONFIG_MICROCODE_XEN=y
-# CONFIG_VMI is not set
+CONFIG_VMI=y
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
-# CONFIG_PARAVIRT_SPINLOCKS is not set
+CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_MEMTEST is not set
-CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
-CONFIG_M686=y
+# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
-# CONFIG_MPENTIUM4 is not set
+CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
@@ -274,9 +269,8 @@
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=5
+CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
-CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
@@ -296,21 +290,24 @@
CONFIG_CPU_SUP_UMC_32=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
-# CONFIG_HPET_TIMER is not set
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=8
-# CONFIG_SCHED_SMT is not set
+CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
-# CONFIG_X86_MCE is not set
+CONFIG_X86_MCE=y
+# CONFIG_X86_MCE_NONFATAL is not set
+CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
@@ -350,7 +347,7 @@
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_MMU_NOTIFIER=y
-# CONFIG_HIGHPTE is not set
+CONFIG_HIGHPTE=n
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
@@ -359,23 +356,23 @@
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
-# CONFIG_EFI is not set
+CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
+# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x1000000
+CONFIG_CRASH_DUMP=y
+CONFIG_PHYSICAL_START=0x400000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
-CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_PHYSICAL_ALIGN=0x400000
CONFIG_HOTPLUG_CPU=y
-CONFIG_COMPAT_VDSO=y
+# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -383,10 +380,15 @@
# Power management and ACPI options
#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_TRACE=y
+CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
@@ -395,32 +397,75 @@
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
-CONFIG_ACPI_AC=m
-CONFIG_ACPI_BATTERY=m
-CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
-CONFIG_ACPI_FAN=m
+CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_THERMAL=m
-CONFIG_ACPI_CUSTOM_DSDT_FILE=""
+CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=2001
-CONFIG_ACPI_DEBUG=y
-# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
+CONFIG_ACPI_BLACKLIST_YEAR=1999
+# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
-CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=m
-# CONFIG_APM is not set
+CONFIG_X86_APM_BOOT=y
+CONFIG_APM=y
+# CONFIG_APM_IGNORE_USER_SUSPEND is not set
+# CONFIG_APM_DO_ENABLE is not set
+CONFIG_APM_CPU_IDLE=y
+# CONFIG_APM_DISPLAY_BLANK is not set
+# CONFIG_APM_ALLOW_INTS is not set
#
# CPU Frequency scaling
#
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m+
+#
+# CPUFreq processor drivers
+#
+CONFIG_X86_ACPI_CPUFREQ=m
+# CONFIG_X86_POWERNOW_K6 is not set
+CONFIG_X86_POWERNOW_K7=y
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+# CONFIG_X86_GX_SUSPMOD is not set
+# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
+CONFIG_X86_SPEEDSTEP_ICH=y
+CONFIG_X86_SPEEDSTEP_SMI=y
+CONFIG_X86_P4_CLOCKMOD=m
+# CONFIG_X86_CPUFREQ_NFORCE2 is not set
+CONFIG_X86_LONGRUN=y
+# CONFIG_X86_LONGHAUL is not set
+CONFIG_X86_E_POWERSAVER=y
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=y
+# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
@@ -451,15 +496,15 @@
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
-# CONFIG_ISA is not set
+CONFIG_ISA=y
+# CONFIG_EISA is not set
# CONFIG_MCA is not set
-CONFIG_SCx200=m
-CONFIG_SCx200HR_TIMER=m
+# CONFIG_SCx200 is not set
CONFIG_OLPC=y
CONFIG_K8_NB=y
-CONFIG_PCCARD=m
+CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
@@ -475,17 +520,19 @@
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
+CONFIG_I82365=m
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_IBM is not set
-CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
-CONFIG_HOTPLUG_PCI_CPCI=y
-CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
-CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
-CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
@@ -493,22 +540,22 @@
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
-CONFIG_PACKET=m
+CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
@@ -561,12 +608,12 @@
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
+CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
@@ -582,8 +629,9 @@
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -596,7 +644,7 @@
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
@@ -615,8 +663,8 @@
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
@@ -628,6 +676,7 @@
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
@@ -637,7 +686,7 @@
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_DCCP=m@@ -657,9 +706,11 @@
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
@@ -701,17 +752,17 @@
#
# IP: Netfilter Configuration
#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
@@ -766,7 +817,7 @@
#
# DECnet: Netfilter Configuration
#
-CONFIG_DECNET_NF_GRABULATOR=m
+# CONFIG_DECNET_NF_GRABULATOR is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -805,19 +856,21 @@
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
-# CONFIG_NET_DCCPPROBE is not set
+CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set-# CONFIG_TIPC is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
-CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
+# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_STP=m
@@ -829,21 +882,21 @@
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
-CONFIG_LLC2=m
+# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
+# CONFIG_LTPC is not set
+# CONFIG_COPS is not set
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
-CONFIG_X25=m
-CONFIG_LAPB=m
-CONFIG_ECONET=m
-# CONFIG_ECONET_AUNUDP is not set
-# CONFIG_ECONET_NATIVE is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
+CONFIG_PHONET=m
CONFIG_NET_SCHED=y
#
@@ -881,7 +934,13 @@
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_CLS_CGROUP is not set
-# CONFIG_NET_EMATCH is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m@@ -892,7 +951,7 @@
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
-# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
@@ -900,7 +959,7 @@
# Network testing
#
CONFIG_NET_PKTGEN=m
-CONFIG_NET_TCPPROBE=m
+# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
@@ -918,6 +977,9 @@
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
+CONFIG_SCC=m
+# CONFIG_SCC_DELAY is not set
+CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
@@ -940,13 +1002,13 @@
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
+# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
+CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
@@ -1017,14 +1079,12 @@
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
-CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-CONFIG_RXKAD=m
+# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not set+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
@@ -1057,14 +1117,14 @@
#
# Generic Driver Options
#
-CONFIG_UEVENT_HELPER_PATH=""
-# CONFIG_STANDALONE is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_DEBUG_DEVRES=y
CONFIG_SYS_HYPERVISOR=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
@@ -1083,15 +1143,15 @@
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
-CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
CONFIG_RFD_FTL=m
-# CONFIG_SSFDC is not set
+CONFIG_SSFDC=m
CONFIG_MTD_OOPS=m
#
@@ -1100,11 +1160,7 @@
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y@@ -1115,49 +1171,43 @@
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
-CONFIG_MTD_SBC_GXX=m
-CONFIG_MTD_SCx200_DOCFLASH=m
-CONFIG_MTD_AMD76XROM=m
-CONFIG_MTD_ICHXROM=m
+# CONFIG_MTD_SBC_GXX is not set
+# CONFIG_MTD_AMD76XROM is not set
+# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
-CONFIG_MTD_NETtel=m
-CONFIG_MTD_DILNETPC=m
-CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
-CONFIG_MTD_L440GX=m
+# CONFIG_MTD_NETtel is not set
+# CONFIG_MTD_DILNETPC is not set
+# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
-CONFIG_MTD_INTEL_VR_NOR=m
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
-CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
@@ -1166,15 +1216,9 @@
#
# Disk-On-Chip Device Drivers
#
-CONFIG_MTD_DOC2000=m
-CONFIG_MTD_DOC2001=m
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-CONFIG_MTD_DOCPROBE_ADVANCED=y
-CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
-CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_DOCPROBE_55AA=y
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
@@ -1183,17 +1227,13 @@
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
-# CONFIG_MTD_NAND_CS553X is not set
+CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
+# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ALAUDA=m
-CONFIG_MTD_ONENAND=m
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-CONFIG_MTD_ONENAND_OTP=y
-CONFIG_MTD_ONENAND_2X_PROGRAM=y
-CONFIG_MTD_ONENAND_SIM=m
+# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
@@ -1215,11 +1255,11 @@
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_PC_SUPERIO=y
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
@@ -1228,9 +1268,12 @@
#
# Protocols
#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
+# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE=m
#
@@ -1267,116 +1310,50 @@
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=64000
-CONFIG_BLK_DEV_XIP=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
-CONFIG_CDROM_PKTCDVD_WCACHE=y
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=y
+CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
-CONFIG_PHANTOM=m
+# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
-# CONFIG_ICS932S401 is not set
+CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HP_ILO=m
# CONFIG_DELL_LAPTOP is not set
# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
+CONFIG_C2PORT=m
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_93CX6=m
CONFIG_HAVE_IDE=y
-CONFIG_IDE=m
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=m
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-CONFIG_BLK_DEV_IDECS=m
-CONFIG_BLK_DEV_DELKIN=m
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEACPI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-CONFIG_BLK_DEV_PLATFORM=m
-CONFIG_BLK_DEV_CMD640=m
-CONFIG_BLK_DEV_CMD640_ENHANCED=y
-CONFIG_BLK_DEV_IDEPNP=m
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_BLK_DEV_OFFBOARD=y
-CONFIG_BLK_DEV_GENERIC=m
-CONFIG_BLK_DEV_OPTI621=m
-CONFIG_BLK_DEV_RZ1000=m
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-CONFIG_BLK_DEV_AEC62XX=m
-CONFIG_BLK_DEV_ALI15X3=m
-CONFIG_BLK_DEV_AMD74XX=m
-CONFIG_BLK_DEV_ATIIXP=m
-CONFIG_BLK_DEV_CMD64X=m
-CONFIG_BLK_DEV_TRIFLEX=m
-CONFIG_BLK_DEV_CS5520=m-# CONFIG_BLK_DEV_CS5536 is not set
-CONFIG_BLK_DEV_HPT366=m
-CONFIG_BLK_DEV_JMICRON=m
-CONFIG_BLK_DEV_SC1200=m
-CONFIG_BLK_DEV_PIIX=m
-# CONFIG_BLK_DEV_IT8172 is not set
-CONFIG_BLK_DEV_IT8213=m
-CONFIG_BLK_DEV_IT821X=m
-CONFIG_BLK_DEV_NS87415=m
-CONFIG_BLK_DEV_PDC202XX_OLD=m
-CONFIG_BLK_DEV_PDC202XX_NEW=m
-CONFIG_BLK_DEV_SVWKS=m
-CONFIG_BLK_DEV_SIIMAGE=m
-CONFIG_BLK_DEV_SIS5513=m
-CONFIG_BLK_DEV_SLC90E66=m
-CONFIG_BLK_DEV_TRM290=m
-CONFIG_BLK_DEV_VIA82CXXX=m
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
+CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
@@ -1385,12 +1362,12 @@
#
# SCSI support type (disk, tape, CD-ROM)
#
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
@@ -1400,7 +1377,7 @@
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
-CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-CONFIG_SCSI_CXGB3_ISCSI=m
+# CONFIG_SCSI_CXGB3_ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
+# CONFIG_SCSI_7000FASST is not set
CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AHA152X=m
+# CONFIG_SCSI_AHA1542 is not set
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
-CONFIG_AIC7XXX_RESET_DELAY_MS=5000
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=32
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
-CONFIG_AIC79XX_REG_PRETTY_PRINT=y
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
-CONFIG_AIC94XX_DEBUG=y
-CONFIG_SCSI_DPT_I2O=m
+# CONFIG_AIC94XX_DEBUG is not set
+# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=m
+# CONFIG_SCSI_IN2000 is not set
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
@@ -1448,20 +1429,22 @@
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
-# CONFIG_SCSI_MPT2SAS is not set
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m-CONFIG_FCOE=m
-CONFIG_SCSI_DMX3191D=m
-CONFIG_SCSI_EATA=m
-CONFIG_SCSI_EATA_TAGGED_QUEUE=y
-CONFIG_SCSI_EATA_LINKED_COMMANDS=y
-CONFIG_SCSI_EATA_MAX_TAGS=16
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
@@ -1470,23 +1453,28 @@
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_IPR=m
-CONFIG_SCSI_IPR_TRACE=y
-CONFIG_SCSI_IPR_DUMP=y
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+# CONFIG_SCSI_SYM53C416 is not set
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
-CONFIG_SCSI_NSP32=m
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_SRP=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
@@ -1494,21 +1482,24 @@
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
-CONFIG_SCSI_DH=m CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
-# CONFIG_SCSI_OSD_INITIATOR is not set
-CONFIG_ATA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=m
+CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
-CONFIG_ATA_PIIX=m
+CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
@@ -1539,10 +1530,12 @@
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
-# CONFIG_PATA_HPT3X3_DMA is not set
+CONFIG_PATA_HPT3X3_DMA=y
+# CONFIG_PATA_ISAPNP is not set
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
+# CONFIG_PATA_LEGACY is not set
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
@@ -1555,15 +1548,17 @@
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
-CONFIG_PATA_RADISYS=m
-CONFIG_PATA_RZ1000=m
-CONFIG_PATA_SC1200=m
+CONFIG_PATA_QDI=m
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
+# CONFIG_PATA_WINBOND_VLB is not set
CONFIG_PATA_SCH=m
CONFIG_MD=y CONFIG_MD_RAID6_PQ=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_DELAY=m
+# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
-CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
-# CONFIG_FUSION_LOGGING is not set
+CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
@@ -1601,20 +1596,13 @@
#
# Enable only one of the two stacks, unless you know what you are doing
#
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=m
-CONFIG_IEEE1394_OHCI1394=m
-CONFIG_IEEE1394_PCILYNX=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_DV1394=m
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_SBP2=m
+# CONFIG_IEEE1394 is not set
CONFIG_I2O=m
-CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
@@ -1623,7 +1611,8 @@
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
-# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_IFB=m
@@ -1634,15 +1623,7 @@
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_NET_SB1000=m
-CONFIG_ARCNET=m
-CONFIG_ARCNET_1201=m
-CONFIG_ARCNET_1051=m
-CONFIG_ARCNET_RAW=m
-CONFIG_ARCNET_CAP=m
-CONFIG_ARCNET_COM90xx=m
-CONFIG_ARCNET_COM90xxIO=m
-CONFIG_ARCNET_RIM_I=m
-# CONFIG_ARCNET_COM20020 is not set
+# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
@@ -1662,32 +1643,52 @@
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MDIO_BITBANG=m
-# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
+# CONFIG_EL1 is not set
+# CONFIG_EL2 is not set
+# CONFIG_ELPLUS is not set
+# CONFIG_EL16 is not set
+CONFIG_EL3=m
+# CONFIG_3C515 is not set
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
-CONFIG_ENC28J60=m
-# CONFIG_ENC28J60_WRITEVERIFY is not set
-# CONFIG_ETHOC is not set
+# CONFIG_LANCE is not set
+CONFIG_NET_VENDOR_SMC=y
+CONFIG_ULTRA=m
+# CONFIG_SMC9194 is not set
+CONFIG_ETHOC=m
+# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-CONFIG_TULIP_NAPI=y
-CONFIG_TULIP_NAPI_HW_MITIGATION=y
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
-CONFIG_HP100=m
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+CONFIG_EWRK3=m
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=m
+# CONFIG_ZNET is not set
+# CONFIG_SEEQ8005 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -1699,12 +1700,15 @@
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
+# CONFIG_CS89x0 is not set
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
@@ -1723,7 +1727,7 @@
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
-# CONFIG_VIA_RHINE_MMIO is not set
+CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
@@ -1738,7 +1742,7 @@
CONFIG_E1000E=m
CONFIG_IP1000=m CONFIG_IGB=m
-# CONFIG_IGBVF is not set
+CONFIG_IGBVF=m
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
@@ -1756,55 +1760,52 @@
CONFIG_ATL1=m
CONFIG_ATL1E=m
# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
+CONFIG_JME=m
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=m
-# CONFIG_ENIC is not set
+CONFIG_ENIC=m
CONFIG_IXGBE=m
CONFIG_IXGB=m
CONFIG_S2IO=m
CONFIG_MYRI10GE=m
CONFIG_NIU=m
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
-# CONFIG_QLGE is not set
-CONFIG_SFC=m
-CONFIG_SFC_MTD=y
-# CONFIG_BE2NET is not set
+CONFIG_QLGE=m
+# CONFIG_SFC is not set
+CONFIG_BE2NET=m
CONFIG_TR=y
+# CONFIG_IBMTR is not set
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
-CONFIG_TMS380TR=m
-CONFIG_TMSPCI=m
-CONFIG_ABYSS=m
+# CONFIG_TMS380TR is not set
+# CONFIG_SMCTR is not set
#
# Wireless LAN
#
-CONFIG_WLAN_PRE80211=y
-CONFIG_STRIP=m
-CONFIG_PCMCIA_WAVELAN=m
-CONFIG_PCMCIA_NETWAVE=m-CONFIG_PCMCIA_RAYCS=m
+# CONFIG_PCMCIA_RAYCS is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_LIBERTAS_DEBUG=y
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
-# CONFIG_AT76C50X_USB is not set
+CONFIG_AT76C50X_USB=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
@@ -1814,17 +1815,17 @@
CONFIG_RTL8187=m
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
-# CONFIG_MWL8K is not set
+CONFIG_MWL8K=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
-# CONFIG_P54_SPI is not set
CONFIG_P54_LEDS=y
CONFIG_ATH5K=m
-# CONFIG_ATH5K_DEBUG is not set
+CONFIG_ATH5K_DEBUG=y
CONFIG_ATH9K=m
# CONFIG_ATH9K_DEBUG is not set
-# CONFIG_AR9170_USB is not set
+CONFIG_AR9170_USB=m
+CONFIG_AR9170_LEDS=y
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
@@ -1840,7 +1841,8 @@
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLWIFI_RFKILL=y
# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT is not set
-# CONFIG_IWLWIFI_DEBUG is not set
+CONFIG_IWLWIFI_DEBUG=y
+CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWLAGN=m
CONFIG_IWL4965=y
CONFIG_IWL5000=y
@@ -1859,13 +1861,14 @@
CONFIG_B43_PIO=y
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
-# CONFIG_B43_DEBUG is not set+CONFIG_B43_DEBUG=y
+# CONFIG_B43_FORCE_PIO is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_RFKILL=y
-# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
@@ -1896,9 +1899,9 @@
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_DM9601=m
-# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
@@ -1923,63 +1926,40 @@
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_PCMCIA_IBMTR=m
-CONFIG_WAN=y
-CONFIG_LANMEDIA=m
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-CONFIG_HDLC_X25=m
-CONFIG_PCI200SYN=m
-CONFIG_WANXL=m
-CONFIG_PC300TOO=m
-CONFIG_FARSYNC=m
-# CONFIG_DSCC4 is not set
-CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
-# CONFIG_WAN_ROUTER_DRIVERS is not set
-CONFIG_LAPBETHER=m
-CONFIG_X25_ASY=m
-# CONFIG_SBNI is not set
+# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
-CONFIG_ATM_DUMMY=m
+# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m-CONFIG_ATM_ZATM=m
-# CONFIG_ATM_ZATM_DEBUG is not set
+# CONFIG_ATM_ZATM is not set
CONFIG_ATM_NICSTAR=m
-CONFIG_ATM_NICSTAR_USE_SUNI=y
-CONFIG_ATM_NICSTAR_USE_IDT77105=y
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
-CONFIG_ATM_IDT77252_RCV_ALL=y
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
-CONFIG_ATM_IA=m
-# CONFIG_ATM_IA_DEBUG is not set
+# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=m
-CONFIG_ATM_FORE200E_USE_TASKLET=y
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
-CONFIG_ATM_HE_USE_SUNI=y
+# CONFIG_ATM_HE_USE_SUNI is not set
# CONFIG_ATM_SOLOS is not set
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
-CONFIG_HIPPI=y
-CONFIG_ROADRUNNER=m
-CONFIG_ROADRUNNER_LARGE_RINGS=y
+# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
@@ -1987,7 +1967,7 @@
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
@@ -1996,23 +1976,23 @@
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_VIRTIO_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
+# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
-CONFIG_ISDN_X25=y
#
# ISDN feature submodules
@@ -2033,9 +2013,9 @@
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
-# CONFIG_HISAX_NO_SENDCOMPLETE is not set
-# CONFIG_HISAX_NO_LLC is not set
-# CONFIG_HISAX_NO_KEYPAD is not set
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
@@ -2043,17 +2023,27 @@
#
# HiSax supported cards
#
+# CONFIG_HISAX_16_0 is not set
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
+# CONFIG_HISAX_AVM_A1 is not set
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
+# CONFIG_HISAX_IX1MICROR2 is not set
CONFIG_HISAX_DIEHLDIVA=y
+# CONFIG_HISAX_ASUSCOM is not set
+# CONFIG_HISAX_TELEINT is not set
+# CONFIG_HISAX_HFCS is not set
CONFIG_HISAX_SEDLBAUER=y
+# CONFIG_HISAX_SPORTSTER is not set
+# CONFIG_HISAX_MIC is not set
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
+# CONFIG_HISAX_ISURF is not set
+# CONFIG_HISAX_HSTSAPHIR is not set
CONFIG_HISAX_BKM_A4T=y CONFIG_HISAX_GAZEL=y
@@ -2061,7 +2051,7 @@
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
-CONFIG_HISAX_DEBUG=y
+# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
@@ -2075,7 +2065,7 @@
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
+# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
@@ -2083,6 +2073,10 @@
#
# Active cards
#
+# CONFIG_ISDN_DRV_ICN is not set
+# CONFIG_ISDN_DRV_PCBIT is not set
+# CONFIG_ISDN_DRV_SC is not set
+# CONFIG_ISDN_DRV_ACT2000 is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_ISDN_DRV_GIGASET=m
@@ -2090,10 +2084,10 @@
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
-CONFIG_GIGASET_UNDOCREQ=y
+# CONFIG_GIGASET_UNDOCREQ is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
+# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
@@ -2104,8 +2098,10 @@
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
+# CONFIG_ISDN_DRV_AVMB1_B1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+# CONFIG_ISDN_DRV_AVMB1_T1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
@@ -2117,20 +2113,20 @@
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m-CONFIG_PHONE=m
+# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
+CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
@@ -2143,12 +2139,11 @@
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_KEYBOARD_NEWTON=m
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
@@ -2158,12 +2153,14 @@
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_PS2_OLPC is not set
+CONFIG_MOUSE_PS2_OLPC=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_GPIO=m
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
@@ -2193,6 +2190,7 @@
CONFIG_JOYSTICK_XPAD=m+# CONFIG_JOYSTICK_WALKERA0701 is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
@@ -2200,10 +2198,7 @@
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
@@ -2212,13 +2207,11 @@
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
+# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
@@ -2243,19 +2236,18 @@
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
-# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_CT82C710=m
-CONFIG_SERIO_PARKBD=m
-CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
@@ -2272,94 +2264,100 @@
CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
+# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_COMPUTONE=m
+# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
-CONFIG_CYZ_INTR=y
-CONFIG_DIGIEPCA=m
-CONFIG_MOXA_INTELLIO=m
-CONFIG_MOXA_SMARTIO=m
-CONFIG_ISI=m
+# CONFIG_CYZ_INTR is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
-CONFIG_RISCOM8=m
-CONFIG_SPECIALIX=m
-CONFIG_SX=m
-CONFIG_RIO=m
-CONFIG_RIO_OLDPCI=y
-CONFIG_STALDRV=y
-# CONFIG_STALLION is not set
-# CONFIG_ISTALLION is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
CONFIG_NOZOMI=m
#
# Serial drivers
#
-CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_PCI=m
-CONFIG_SERIAL_8250_PNP=m
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=16
-CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
+# CONFIG_SERIAL_8250_FOURPORT is not set+# CONFIG_SERIAL_8250_BOCA is not
set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_CORE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=0
+# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
+CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
+CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
-CONFIG_IPMI_PANIC_EVENT=y
-CONFIG_IPMI_PANIC_STRING=y
+# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
-CONFIG_NVRAM=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=y
+CONFIG_DTLK=m
CONFIG_R3964=m
-CONFIG_APPLICOM=m
+# CONFIG_APPLICOM is not set
CONFIG_SONYPI=m
#
# PCMCIA character devices
# CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
-CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=4096
-# CONFIG_HPET is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_HPET=y
+# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
@@ -2400,16 +2398,15 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
-CONFIG_I2C_GPIO=m
-CONFIG_I2C_OCORES=m
-# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SIMTEC=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_TAOS_EVM=m
+# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
#
@@ -2420,75 +2417,36 @@
#
# Other I2C/SMBus bus drivers
#
+CONFIG_I2C_PCA_ISA=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_STUB=m
-CONFIG_SCx200_I2C=m
-CONFIG_SCx200_I2C_SCL=12
-CONFIG_SCx200_I2C_SDA=13
-CONFIG_SCx200_ACB=m
+# CONFIG_SCx200_ACB is not set
#
# Miscellaneous I2C Chip support
#
-CONFIG_DS1682=m
+# CONFIG_DS1682 is not set+CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_MAX6875=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=m
-CONFIG_SPI_BUTTERFLY=m
-# CONFIG_SPI_GPIO is not set
-CONFIG_SPI_LM70_LLP=m
-
-#
-# SPI Protocol Masters
-#
-CONFIG_SPI_SPIDEV=m
-CONFIG_SPI_TLE62X0=m
+# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-CONFIG_GPIO_MAX732X=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_GPIO_PCF857X=m
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-CONFIG_GPIO_MAX7301=m
-CONFIG_GPIO_MCP23S08=m
+# CONFIG_GPIOLIB is not set
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#+# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
-CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
@@ -2499,33 +2457,32 @@
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
-# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=m
-CONFIG_BATTERY_DS2760=m
-CONFIG_BATTERY_OLPC=m
-# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_OLPC=y
+CONFIG_BATTERY_BQ27x00=m
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
-CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
-# CONFIG_SENSORS_ADT7462 is not set
+CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7473=m
-# CONFIG_SENSORS_ADT7475 is not set
+CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
-# CONFIG_SENSORS_ATK0110 is not set
+CONFIG_SENSORS_ATK0110=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
@@ -2535,7 +2492,7 @@
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_FSCHMD=m
-# CONFIG_SENSORS_G760A is not set
+CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m@@ -2543,7 +2500,6 @@
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
@@ -2554,16 +2510,14 @@
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
-# CONFIG_SENSORS_LTC4215 is not set
+CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
+CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
-# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_SMSC47M1=m
@@ -2583,11 +2537,10 @@
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
-# CONFIG_SENSORS_LIS3LV02D is not set
+CONFIG_SENSORS_LIS3LV02D=m
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_THERMAL=m
-CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -2595,37 +2548,43 @@
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
-CONFIG_ACQUIRE_WDT=m
-CONFIG_ADVANTECH_WDT=m
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
-CONFIG_SC520_WDT=m
-CONFIG_EUROTECH_WDT=m
-CONFIG_IB700_WDT=m
+# CONFIG_SC520_WDT is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_IB700_WDT is not set-CONFIG_WAFER_WDT=m
+# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
-# CONFIG_IT87_WDT is not set
+CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
-CONFIG_SC1200_WDT=m
-CONFIG_SCx200_WDT=m
-CONFIG_PC87413_WDT=m
-CONFIG_60XX_WDT=m
-CONFIG_SBC8360_WDT=m
-CONFIG_SBC7240_WDT=m
-CONFIG_CPU5_WDT=m
+# CONFIG_SC1200_WDT is not set
+# CONFIG_PC87413_WDT is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_SBC7240_WDT is not set
+# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
-CONFIG_SMSC37B787_WDT=m
+# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
-# CONFIG_W83697UG_WDT is not set
+CONFIG_W83697UG_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
-CONFIG_SBC_EPX_C3_WATCHDOG=m
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
#
# PCI-based Watchdog Cards
@@ -2660,12 +2619,9 @@
#
CONFIG_MFD_CORE=m
CONFIG_MFD_SM501=m
-CONFIG_MFD_SM501_GPIO=y
-CONFIG_HTC_PASIC3=m
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+CONFIG_MFD_WM8400=m
@@ -2699,14 +2655,10 @@
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
-CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
@@ -2721,42 +2673,80 @@
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_TCM825X=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_SAA7191=m
+# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
+
+#
+# Video improvement chips
+#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
-CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
+# CONFIG_VIDEO_PMS is not set
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
@@ -2786,7 +2776,7 @@
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_MT9M001=m
-# CONFIG_SOC_CAMERA_MT9M111 is not set
+CONFIG_SOC_CAMERA_MT9M111=m
# CONFIG_SOC_CAMERA_MT9T031 is not set
CONFIG_SOC_CAMERA_MT9V022=m
# CONFIG_SOC_CAMERA_TW9910 is not set
@@ -2796,42 +2786,44 @@
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
+CONFIG_USB_M5602=m-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_OV519=m
# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-# CONFIG_VIDEO_HDPVR is not set
+CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
-# CONFIG_VIDEO_CX231XX is not set+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
@@ -2845,7 +2837,7 @@
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
-CONFIG_USB_ZC0301=m
+# CONFIG_USB_ZC0301 is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
@@ -2853,12 +2845,23 @@
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
CONFIG_USB_DSBR=m
CONFIG_USB_SI470X=m
-# CONFIG_USB_MR800 is not set
+CONFIG_USB_MR800=m
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
@@ -2878,32 +2881,7 @@
#
# Supported USB Adapters
#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-# CONFIG_DVB_USB_CXUSB is not set
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_DW2102=m
-# CONFIG_DVB_USB_CINERGY_T2 is not set
-CONFIG_DVB_USB_ANYSEE=m
-# CONFIG_DVB_USB_DTV5100 is not set
-# CONFIG_DVB_USB_AF9015 is not set
-# CONFIG_DVB_USB_CE6230 is not set
+# CONFIG_DVB_USB is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_SIANO_SMS1XXX=m
@@ -2933,11 +2911,6 @@
# CONFIG_DVB_DM1105 is not set
#
-# Supported FireWire (IEEE 1394) Adapters
-#
-# CONFIG_DVB_FIREDTV is not set
-
-#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
@@ -2948,8 +2921,6 @@
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0288=m
-CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
@@ -2961,8 +2932,6 @@
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
-CONFIG_DVB_CX24116=m
-CONFIG_DVB_SI21XX=m
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
@@ -2971,9 +2940,6 @@
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m CONFIG_DVB_S5H1411=m
CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
@@ -2998,17 +2963,17 @@
#
# Graphics support
#
-CONFIG_AGP=m
-CONFIG_AGP_ALI=m
-CONFIG_AGP_ATI=m
-CONFIG_AGP_AMD=m
-CONFIG_AGP_AMD64=m
-CONFIG_AGP_INTEL=m
-CONFIG_AGP_NVIDIA=m
-CONFIG_AGP_SIS=m
-CONFIG_AGP_SWORKS=m
-CONFIG_AGP_VIA=m
-CONFIG_AGP_EFFICEON=m
+CONFIG_AGP=y
+CONFIG_AGP_ALI=y
+CONFIG_AGP_ATI=y
+CONFIG_AGP_AMD=y
+CONFIG_AGP_AMD64=y
+CONFIG_AGP_INTEL=y
+CONFIG_AGP_NVIDIA=y
+CONFIG_AGP_SIS=y
+CONFIG_AGP_SWORKS=y
+CONFIG_AGP_VIA=y
+CONFIG_AGP_EFFICEON=y
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
@@ -3024,7 +2989,7 @@
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
@@ -3037,7 +3002,6 @@
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
@@ -3048,32 +3012,30 @@
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m-CONFIG_FB_CYBER2000=m
-CONFIG_FB_ARC=m
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
-CONFIG_FB_IMSTT=y
+# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
-CONFIG_FB_UVESA=m
+# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
-CONFIG_FB_N411=m
-CONFIG_FB_HGA=m
-CONFIG_FB_HGA_ACCEL=y
-CONFIG_FB_S1D13XXX=m
+CONFIG_FB_EFI=y
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
-CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
-CONFIG_FB_LE80578=m
-CONFIG_FB_CARILLO_RANCH=m
+# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
@@ -3081,13 +3043,15 @@
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
-# CONFIG_FB_MATROX_I2C is not set
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
-CONFIG_FB_SIS=m
-CONFIG_FB_SIS_300=y
-CONFIG_FB_SIS_315=y
-# CONFIG_FB_VIA is not set
+# CONFIG_FB_SIS is not set
+CONFIG_FB_VIA=m
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
-CONFIG_FB_VT8623=m
+# CONFIG_FB_VT8623 is not set
CONFIG_FB_TRIDENT=m
-CONFIG_FB_ARK=m
-CONFIG_FB_PM3=m
-CONFIG_FB_CARMINE=m
-CONFIG_FB_CARMINE_DRAM_EVAL=y
-# CONFIG_CARMINE_DRAM_CUSTOM is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=m
-CONFIG_FB_GEODE_GX=m
-CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_GEODE_LX=y
+CONFIG_FB_GEODE_GX=y
+# CONFIG_FB_GEODE_GX1 is not set
# CONFIG_FB_TMIO is not set
CONFIG_FB_SM501=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=y
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+# CONFIG_FB_MB862XX_PCI_GDC is not set
+CONFIG_FB_BROADSHEET=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_LTV350QV=m
-CONFIG_LCD_ILI9320=m
-# CONFIG_LCD_TDO24M is not set
-CONFIG_LCD_VGG2432A4=m
+# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=m
#
# Display device support
@@ -3154,14 +3111,18 @@
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
@@ -3177,19 +3138,22 @@
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
+CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
+CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTS64=m
@@ -3197,8 +3161,43 @@
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CS4231 is not set
+CONFIG_SND_CS4236=m
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_ES1688 is not set
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+CONFIG_SND_OPL3SA2=m
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_MIRO=m
+# CONFIG_SND_SB8 is not set
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+# CONFIG_SND_SB16_CSP is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_WAVEFRONT is not set
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
@@ -3209,7 +3208,7 @@
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
-CONFIG_SND_AW2=m
+# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
@@ -3220,7 +3219,7 @@
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
-# CONFIG_SND_CS5530 is not set
+CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
@@ -3248,7 +3247,7 @@
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
-CONFIG_SND_HDA_INPUT_BEEP=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
@@ -3287,87 +3286,63 @@
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
-CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
-# CONFIG_SND_USB_US122L is not set
-CONFIG_SND_PCMCIA=y
-CONFIG_SND_VXPOCKET=m
-CONFIG_SND_PDAUDIOCF=m
+CONFIG_SND_USB_US122L=m
+# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
-CONFIG_SOUND_PRIME=m
-CONFIG_SOUND_OSS=m
-CONFIG_SOUND_TRACEINIT=y
-CONFIG_SOUND_DMAP=y
-CONFIG_SOUND_SSCAPE=m
-CONFIG_SOUND_VMIDI=m
-CONFIG_SOUND_TRIX=m
-CONFIG_SOUND_MSS=m
-CONFIG_SOUND_MPU401=m
-CONFIG_SOUND_PAS=m
-CONFIG_SOUND_PSS=m
-CONFIG_PSS_MIXER=y
-# CONFIG_PSS_HAVE_BOOT is not set
-CONFIG_SOUND_SB=m
-CONFIG_SOUND_YM3812=m
-CONFIG_SOUND_UART6850=m
-CONFIG_SOUND_AEDSP16=m
-CONFIG_SC6600=y
-CONFIG_SC6600_JOY=y
-CONFIG_SC6600_CDROM=4
-CONFIG_SC6600_CDROMBASE=0x0-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
-CONFIG_USB_HID=m
+CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=m
-CONFIG_HID_KYE=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_KENSINGTON=m
-CONFIG_HID_LOGITECH=m
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_DRAGONRISE_FF=m
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_NTRIG=m
-CONFIG_HID_PANTHERLORD=m
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
# CONFIG_GREENASIA_FF is not set
-CONFIG_HID_TOPSEED=m
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+CONFIG_HID_TOPSEED=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=m
+CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
@@ -3379,43 +3354,38 @@
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
-CONFIG_USB_MON=m
+CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
-CONFIG_USB_C67X00_HCD=m
-CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
-CONFIG_USB_ISP116X_HCD=m
-CONFIG_USB_ISP1760_HCD=m
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_HCD_SSB is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_U132_HCD is not set
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_SL811_CS is not set
#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
-# CONFIG_USB_TMC is not set
+CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
@@ -3458,7 +3428,7 @@
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP210X is not set
+CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -3468,23 +3438,11 @@
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
+# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
@@ -3501,7 +3459,7 @@
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_SYMBOL=m CONFIG_USB_SERIAL_XIRCOM=m
@@ -3516,14 +3474,14 @@
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
-# CONFIG_USB_SEVSEG is not set
-CONFIG_USB_RIO500=m
+CONFIG_USB_SEVSEG=m
+# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
@@ -3534,7 +3492,7 @@
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
-# CONFIG_USB_VST is not set
+CONFIG_USB_VST=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
@@ -3544,8 +3502,8 @@
#
# OTG and related infrastructure
#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_OTG_UTILS=y
+CONFIG_NOP_USB_XCEIV=m
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
@@ -3557,7 +3515,7 @@
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
-CONFIG_MMC_TEST=m
+# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
@@ -3583,38 +3541,32 @@
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CLASS=y
#
-CONFIG_LEDS_NET48XX=m
-CONFIG_LEDS_WRAP=m
# CONFIG_LEDS_ALIX2 is not set
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_LP5521=m
CONFIG_LEDS_CLEVO_MAIL=m
-CONFIG_LEDS_PCA955X=m
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_BD2802=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_EDAC=y
#
@@ -3628,16 +3580,18 @@
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
-# CONFIG_EDAC_X38 is not set
+CONFIG_EDAC_X38=m
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
+CONFIG_EDAC_AMD8131=m
+CONFIG_EDAC_AMD8111=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
@@ -3645,8 +3599,8 @@
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_TEST=m
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
@@ -3662,34 +3616,27 @@
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
-CONFIG_RTC_DRV_S35390A=m
+# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
-# CONFIG_RTC_DRV_RX8581 is not set
+CONFIG_RTC_DRV_RX8581=m
#
# SPI RTC drivers
#
-CONFIG_RTC_DRV_M41T94=m
-CONFIG_RTC_DRV_DS1305=m
-# CONFIG_RTC_DRV_DS1390 is not set
-CONFIG_RTC_DRV_MAX6902=m
-CONFIG_RTC_DRV_R9701=m
-CONFIG_RTC_DRV_RS5C348=m
-# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
-CONFIG_RTC_DRV_CMOS=m
-# CONFIG_RTC_DRV_DS1286 is not set
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
-CONFIG_RTC_DRV_M48T86=m
-# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
-# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_V3020=m
# CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_SMX=m
-# CONFIG_UIO_AEC is not set
-# CONFIG_UIO_SERCOS3 is not set
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
@@ -3719,12 +3666,11 @@
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
-CONFIG_STAGING=y
-CONFIG_STAGING_EXCLUDE_BUILD=y
+# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ASUS_LAPTOP=m
-# CONFIG_DELL_WMI is not set
+CONFIG_DELL_WMI=m
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_TC1100_WMI=m
@@ -3741,8 +3687,8 @@
CONFIG_THINKPAD_ACPI_BAY=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
-CONFIG_INTEL_MENLOW=m
-CONFIG_EEEPC_LAPTOP=m
+# CONFIG_INTEL_MENLOW is not set
+# CONFIG_EEEPC_LAPTOP is not set
CONFIG_ACPI_WMI=m
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_TOSHIBA=m
@@ -3753,6 +3699,7 @@
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
@@ -3766,21 +3713,26 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y-CONFIG_JBD_DEBUG=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
-CONFIG_FS_MBCACHE=m
+CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
@@ -3788,20 +3740,20 @@
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
-CONFIG_JFS_STATISTICS=y
+# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
+# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
# CONFIG_GFS2_FS_LOCKING_DLM is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
-CONFIG_OCFS2_FS_STATS=y
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_OCFS2_FS_POSIX_ACL is not set
@@ -3811,12 +3763,12 @@
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=m
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=y+# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
@@ -3842,27 +3794,25 @@
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
+# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
@@ -3875,33 +3825,25 @@
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=y
+CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
-CONFIG_HPFS_FS=m
+# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
@@ -3910,8 +3852,9 @@
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
+# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_EXOFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
@@ -3934,8 +3877,7 @@
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
@@ -3953,8 +3895,7 @@
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FS is not set
#
# Partition Types
@@ -3962,25 +3903,24 @@
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
+# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
-CONFIG_ULTRIX_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_SYSV68_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
@@ -4003,7 +3943,7 @@
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
+CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
@@ -4019,7 +3959,7 @@
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
+CONFIG_DLM_DEBUG=y
#
# Kernel hacking
@@ -4027,23 +3967,28 @@
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ALLOW_WARNINGS=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set+CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -4051,35 +3996,34 @@
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
+CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-CONFIG_RCU_TORTURE_TEST=m
+CONFIG_BOOT_PRINTK_DELAY=y
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-CONFIG_LKDTM=m
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set-CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -4087,30 +4031,32 @@
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+CONFIG_BUILD_DOCSRC=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
+CONFIG_KGDB=y
+CONFIG_KGDB_SERIAL_CONSOLE=y
+CONFIG_KGDB_TESTS=y
+# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
-# CONFIG_STRICT_DEVMEM is not set
-CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_STRICT_DEVMEM=y
+# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_4KSTACKS is not set
+CONFIG_4KSTACKS=y
CONFIG_DOUBLEFAULT=y
CONFIG_X86_DS_SELFTEST=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
@@ -4123,9 +4069,9 @@
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DEBUG_BOOT_PARAMS is not set
+CONFIG_DEBUG_BOOT_PARAMS=y+CONFIG_OPTIMIZE_INLINING=y
#
# Security options
@@ -4135,18 +4081,20 @@
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
+CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_XOR_BLOCKS=m
@@ -4158,7 +4106,7 @@
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
@@ -4175,7 +4123,7 @@
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
@@ -4207,15 +4155,15 @@
# Digest
#
CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CRC32C_INTEL is not set
+CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
@@ -4240,7 +4188,7 @@
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_TWOFISH is not set
+CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
@@ -4248,27 +4196,30 @@
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_DEV_PADLOCK=m
-CONFIG_CRYPTO_DEV_PADLOCK_AES=m
-CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_GEODE=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
-# CONFIG_KVM is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTIO_BALLOON is not set
-CONFIG_BINARY_PRINTF=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_TRACE=y
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -4279,10 +4230,10 @@
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
-CONFIG_CRC7=m
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
</CODE>
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore
529541
Republic
of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Wed, 22 Jul 2009 20:32:33 +0300
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Thu, Jul 23, 2009 at 01:17:23AM +0800, Teo En
Ming (Zhang Enming) wrote:
> Dear Pasik,
>
> This morning when I go to office i will examine the differences between
> your .config and my .config using diff and create a patch. I will then
> look through the generated patch file and patch my .config accordingly.
>
Yep.
Just remember my .config is a mess; it's originally based on some Fedora 10
default kernel, and then changed many times after that..
But it works for me :)
I've been compiling and running on Fedora 10 and Fedora 11, using Xen 3.3.1
and Xen 3.4.0.
-- Pasi
> Regards,
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
> Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> Teo En Ming (Zhang Enming) wrote:
> >Hi Pasik
> >
> >I suspect that the Z0_startup_32 error has something to do with
> >compiling 32-bit xen kernels. The problem may not appear when
> >compiling 64-bit xen kernels.
> >
> >Pasi Kärkkäinen wrote:
> >>On Wed, Jul 22, 2009 at 07:04:48PM +0300, Pasi Kärkkäinen wrote:
> >>
> >>>On Wed, Jul 22, 2009 at 11:47:11PM +0800, Teo En Ming wrote:
> >>>
> >>>>OOOPS! I still got an error compiling the kernel image.
Please advise.
> >>>>See console output below.
> >>>>
> >>>>
>
>>>http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.30-rc6-tip-next-no-highpte
[http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.30-rc6-tip-next-no-highpte]
> >>>
> >>>That's some random .config from me.. it should work. It works
for me.
> >>>
> >>>
> >>
> >>I was using that .config with xen-tip/next pv_ops dom0 kernel.
> >>
> >>-- Pasi
> >>
> >>_______________________________________________
> >>Xen-devel mailing list
> >>Xen-devel@lists.xensource.com
> >>http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> >>
> >
>
>------------------------------------------------------------------------
> >
> >
> >No virus found in this outgoing message.
> >Checked by AVG - www.avg.com [http://www.avg.com/]
> >Version: 8.5.392 / Virus Database: 270.13.20/2251 - Release Date:
07/20/09
> >18:29:00
> >
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >Xen-devel mailing list
> >Xen-devel@lists.xensource.com
> >http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> >
>
>
> No virus found in this outgoing message.
> Checked by AVG - www.avg.com [http://www.avg.com/]
> Version: 8.5.392 / Virus Database: 270.13.20/2251 - Release Date: 07/20/09
18:29:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 183881 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-23 2:21 ` Teo En Ming
2009-07-23 2:42 ` Teo En Ming
@ 2009-07-23 3:27 ` Teo En Ming
2009-07-23 3:20 ` Teo En Ming
2009-07-23 9:19 ` Teo En Ming
1 sibling, 2 replies; 86+ messages in thread
From: Teo En Ming @ 2009-07-23 3:27 UTC (permalink / raw)
To: 'Teo En Ming', 'Pasi Kärkkäinen'
Cc: xen-devel, jeremy.fitzhardinge
[-- Attachment #1.1: Type: text/plain, Size: 103957 bytes --]
Dear Pasik,
Success in compiling the Xen Dom 0 paravirt ops enabled kernel!
<CODE>
LD Documentation/video4linux/built-in.o
HOSTCC Documentation/video4linux/v4lgrab
LD Documentation/vm/built-in.o
HOSTCC Documentation/vm/slabinfo
LD Documentation/watchdog/src/built-in.o
HOSTCC Documentation/watchdog/src/watchdog-simple
HOSTCC Documentation/watchdog/src/watchdog-test
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
CC arch/x86/boot/a20.o
AS arch/x86/boot/bioscall.o
CC arch/x86/boot/cmdline.o
AS arch/x86/boot/copy.o
HOSTCC arch/x86/boot/mkcpustr
CPUSTR arch/x86/boot/cpustr.h
CC arch/x86/boot/cpu.o
CC arch/x86/boot/cpucheck.o
CC arch/x86/boot/edd.o
VOFFSET arch/x86/boot/voffset.h
LDS arch/x86/boot/compressed/vmlinux.lds
AS arch/x86/boot/compressed/head_32.o
CC arch/x86/boot/compressed/misc.o
OBJCOPY arch/x86/boot/compressed/vmlinux.bin
HOSTCC arch/x86/boot/compressed/relocs
RELOCS arch/x86/boot/compressed/vmlinux.relocs
GZIP arch/x86/boot/compressed/vmlinux.bin.gz
HOSTCC arch/x86/boot/compressed/mkpiggy
MKPIGGY arch/x86/boot/compressed/piggy.S
AS arch/x86/boot/compressed/piggy.o
LD arch/x86/boot/compressed/vmlinux
ZOFFSET arch/x86/boot/zoffset.h
AS arch/x86/boot/header.o
CC arch/x86/boot/main.o
CC arch/x86/boot/mca.o
CC arch/x86/boot/memory.o
CC arch/x86/boot/pm.o
AS arch/x86/boot/pmjump.o
CC arch/x86/boot/printf.o
CC arch/x86/boot/regs.o
CC arch/x86/boot/string.o
CC arch/x86/boot/tty.o
CC arch/x86/boot/video.o
CC arch/x86/boot/video-mode.o
CC arch/x86/boot/version.o
CC arch/x86/boot/apm.o
CC arch/x86/boot/video-vga.o
CC arch/x86/boot/video-vesa.o
CC arch/x86/boot/video-bios.o
LD arch/x86/boot/setup.elf
OBJCOPY arch/x86/boot/setup.bin
OBJCOPY arch/x86/boot/vmlinux.bin
HOSTCC arch/x86/boot/tools/build
BUILD arch/x86/boot/bzImage
Root device is (8, 2)
Setup is 13932 bytes (padded to 14336 bytes).
System is 2784 kB
CRC 17b52ba1
Kernel: arch/x86/boot/bzImage is ready (#4)
</CODE>
Thank you!!!
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Thu, 23 Jul 2009 10:21:39 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Dear Pasik,
I just did a diff this morning. Here are the differences between my kernel
configuration and your kernel configuration.
<CODE>
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
-CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEM_RES_CTLR=y
-# CONFIG_CGROUP_MEM_RES_CTLR_SWAP is not set
-CONFIG_MM_OWNER=y
+# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
@@ -135,7 +131,7 @@
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -158,15 +154,15 @@
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
-CONFIG_OPROFILE=m
-# CONFIG_OPROFILE_IBS is not set
+# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -182,10 +178,10 @@
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
@@ -205,24 +201,24 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
-# CONFIG_SPARSE_IRQ is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_RDC321X is not set
-CONFIG_X86_32_NON_STANDARD=y
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
+# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
@@ -235,25 +231,24 @@
CONFIG_XEN_PRIVILEGED_GUEST=y
# CONFIG_XEN_PCI_PASSTHROUGH_DEBUG is not set
CONFIG_MICROCODE_XEN=y
-# CONFIG_VMI is not set
+CONFIG_VMI=y
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
-# CONFIG_PARAVIRT_SPINLOCKS is not set
+CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_MEMTEST is not set
-CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
-CONFIG_M686=y
+# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
-# CONFIG_MPENTIUM4 is not set
+CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
@@ -274,9 +269,8 @@
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=5
+CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
-CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
@@ -296,21 +290,24 @@
CONFIG_CPU_SUP_UMC_32=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
-# CONFIG_HPET_TIMER is not set
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=8
-# CONFIG_SCHED_SMT is not set
+CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
-# CONFIG_X86_MCE is not set
+CONFIG_X86_MCE=y
+# CONFIG_X86_MCE_NONFATAL is not set
+CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
@@ -350,7 +347,7 @@
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_MMU_NOTIFIER=y
-# CONFIG_HIGHPTE is not set
+CONFIG_HIGHPTE=n
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
@@ -359,23 +356,23 @@
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
-# CONFIG_EFI is not set
+CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
+# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x1000000
+CONFIG_CRASH_DUMP=y
+CONFIG_PHYSICAL_START=0x400000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
-CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_PHYSICAL_ALIGN=0x400000
CONFIG_HOTPLUG_CPU=y
-CONFIG_COMPAT_VDSO=y
+# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -383,10 +380,15 @@
# Power management and ACPI options
#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_TRACE=y
+CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
@@ -395,32 +397,75 @@
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
-CONFIG_ACPI_AC=m
-CONFIG_ACPI_BATTERY=m
-CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
-CONFIG_ACPI_FAN=m
+CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_THERMAL=m
-CONFIG_ACPI_CUSTOM_DSDT_FILE=""
+CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=2001
-CONFIG_ACPI_DEBUG=y
-# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
+CONFIG_ACPI_BLACKLIST_YEAR=1999
+# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
-CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=m
-# CONFIG_APM is not set
+CONFIG_X86_APM_BOOT=y
+CONFIG_APM=y
+# CONFIG_APM_IGNORE_USER_SUSPEND is not set
+# CONFIG_APM_DO_ENABLE is not set
+CONFIG_APM_CPU_IDLE=y
+# CONFIG_APM_DISPLAY_BLANK is not set
+# CONFIG_APM_ALLOW_INTS is not set
#
# CPU Frequency scaling
#
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m+
+#
+# CPUFreq processor drivers
+#
+CONFIG_X86_ACPI_CPUFREQ=m
+# CONFIG_X86_POWERNOW_K6 is not set
+CONFIG_X86_POWERNOW_K7=y
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+# CONFIG_X86_GX_SUSPMOD is not set
+# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
+CONFIG_X86_SPEEDSTEP_ICH=y
+CONFIG_X86_SPEEDSTEP_SMI=y
+CONFIG_X86_P4_CLOCKMOD=m
+# CONFIG_X86_CPUFREQ_NFORCE2 is not set
+CONFIG_X86_LONGRUN=y
+# CONFIG_X86_LONGHAUL is not set
+CONFIG_X86_E_POWERSAVER=y
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=y
+# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
@@ -451,15 +496,15 @@
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
-# CONFIG_ISA is not set
+CONFIG_ISA=y
+# CONFIG_EISA is not set
# CONFIG_MCA is not set
-CONFIG_SCx200=m
-CONFIG_SCx200HR_TIMER=m
+# CONFIG_SCx200 is not set
CONFIG_OLPC=y
CONFIG_K8_NB=y
-CONFIG_PCCARD=m
+CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
@@ -475,17 +520,19 @@
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
+CONFIG_I82365=m
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_IBM is not set
-CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
-CONFIG_HOTPLUG_PCI_CPCI=y
-CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
-CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
-CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
@@ -493,22 +540,22 @@
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
-CONFIG_PACKET=m
+CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
@@ -561,12 +608,12 @@
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
+CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
@@ -582,8 +629,9 @@
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -596,7 +644,7 @@
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
@@ -615,8 +663,8 @@
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
@@ -628,6 +676,7 @@
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
@@ -637,7 +686,7 @@
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_DCCP=m@@ -657,9 +706,11 @@
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
@@ -701,17 +752,17 @@
#
# IP: Netfilter Configuration
#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
@@ -766,7 +817,7 @@
#
# DECnet: Netfilter Configuration
#
-CONFIG_DECNET_NF_GRABULATOR=m
+# CONFIG_DECNET_NF_GRABULATOR is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -805,19 +856,21 @@
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
-# CONFIG_NET_DCCPPROBE is not set
+CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set-# CONFIG_TIPC is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
-CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
+# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_STP=m
@@ -829,21 +882,21 @@
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
-CONFIG_LLC2=m
+# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
+# CONFIG_LTPC is not set
+# CONFIG_COPS is not set
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
-CONFIG_X25=m
-CONFIG_LAPB=m
-CONFIG_ECONET=m
-# CONFIG_ECONET_AUNUDP is not set
-# CONFIG_ECONET_NATIVE is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
+CONFIG_PHONET=m
CONFIG_NET_SCHED=y
#
@@ -881,7 +934,13 @@
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_CLS_CGROUP is not set
-# CONFIG_NET_EMATCH is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m@@ -892,7 +951,7 @@
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
-# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
@@ -900,7 +959,7 @@
# Network testing
#
CONFIG_NET_PKTGEN=m
-CONFIG_NET_TCPPROBE=m
+# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
@@ -918,6 +977,9 @@
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
+CONFIG_SCC=m
+# CONFIG_SCC_DELAY is not set
+CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
@@ -940,13 +1002,13 @@
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
+# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
+CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
@@ -1017,14 +1079,12 @@
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
-CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-CONFIG_RXKAD=m
+# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not set+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
@@ -1057,14 +1117,14 @@
#
# Generic Driver Options
#
-CONFIG_UEVENT_HELPER_PATH=""
-# CONFIG_STANDALONE is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_DEBUG_DEVRES=y
CONFIG_SYS_HYPERVISOR=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
@@ -1083,15 +1143,15 @@
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
-CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
CONFIG_RFD_FTL=m
-# CONFIG_SSFDC is not set
+CONFIG_SSFDC=m
CONFIG_MTD_OOPS=m
#
@@ -1100,11 +1160,7 @@
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y@@ -1115,49 +1171,43 @@
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
-CONFIG_MTD_SBC_GXX=m
-CONFIG_MTD_SCx200_DOCFLASH=m
-CONFIG_MTD_AMD76XROM=m
-CONFIG_MTD_ICHXROM=m
+# CONFIG_MTD_SBC_GXX is not set
+# CONFIG_MTD_AMD76XROM is not set
+# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
-CONFIG_MTD_NETtel=m
-CONFIG_MTD_DILNETPC=m
-CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
-CONFIG_MTD_L440GX=m
+# CONFIG_MTD_NETtel is not set
+# CONFIG_MTD_DILNETPC is not set
+# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
-CONFIG_MTD_INTEL_VR_NOR=m
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
-CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
@@ -1166,15 +1216,9 @@
#
# Disk-On-Chip Device Drivers
#
-CONFIG_MTD_DOC2000=m
-CONFIG_MTD_DOC2001=m
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-CONFIG_MTD_DOCPROBE_ADVANCED=y
-CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
-CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_DOCPROBE_55AA=y
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
@@ -1183,17 +1227,13 @@
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
-# CONFIG_MTD_NAND_CS553X is not set
+CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
+# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ALAUDA=m
-CONFIG_MTD_ONENAND=m
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-CONFIG_MTD_ONENAND_OTP=y
-CONFIG_MTD_ONENAND_2X_PROGRAM=y
-CONFIG_MTD_ONENAND_SIM=m
+# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
@@ -1215,11 +1255,11 @@
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_PC_SUPERIO=y
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
@@ -1228,9 +1268,12 @@
#
# Protocols
#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
+# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE=m
#
@@ -1267,116 +1310,50 @@
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=64000
-CONFIG_BLK_DEV_XIP=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
-CONFIG_CDROM_PKTCDVD_WCACHE=y
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=y
+CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
-CONFIG_PHANTOM=m
+# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
-# CONFIG_ICS932S401 is not set
+CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HP_ILO=m
# CONFIG_DELL_LAPTOP is not set
# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
+CONFIG_C2PORT=m
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_93CX6=m
CONFIG_HAVE_IDE=y
-CONFIG_IDE=m
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=m
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-CONFIG_BLK_DEV_IDECS=m
-CONFIG_BLK_DEV_DELKIN=m
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEACPI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-CONFIG_BLK_DEV_PLATFORM=m
-CONFIG_BLK_DEV_CMD640=m
-CONFIG_BLK_DEV_CMD640_ENHANCED=y
-CONFIG_BLK_DEV_IDEPNP=m
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_BLK_DEV_OFFBOARD=y
-CONFIG_BLK_DEV_GENERIC=m
-CONFIG_BLK_DEV_OPTI621=m
-CONFIG_BLK_DEV_RZ1000=m
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-CONFIG_BLK_DEV_AEC62XX=m
-CONFIG_BLK_DEV_ALI15X3=m
-CONFIG_BLK_DEV_AMD74XX=m
-CONFIG_BLK_DEV_ATIIXP=m
-CONFIG_BLK_DEV_CMD64X=m
-CONFIG_BLK_DEV_TRIFLEX=m
-CONFIG_BLK_DEV_CS5520=m-# CONFIG_BLK_DEV_CS5536 is not set
-CONFIG_BLK_DEV_HPT366=m
-CONFIG_BLK_DEV_JMICRON=m
-CONFIG_BLK_DEV_SC1200=m
-CONFIG_BLK_DEV_PIIX=m
-# CONFIG_BLK_DEV_IT8172 is not set
-CONFIG_BLK_DEV_IT8213=m
-CONFIG_BLK_DEV_IT821X=m
-CONFIG_BLK_DEV_NS87415=m
-CONFIG_BLK_DEV_PDC202XX_OLD=m
-CONFIG_BLK_DEV_PDC202XX_NEW=m
-CONFIG_BLK_DEV_SVWKS=m
-CONFIG_BLK_DEV_SIIMAGE=m
-CONFIG_BLK_DEV_SIS5513=m
-CONFIG_BLK_DEV_SLC90E66=m
-CONFIG_BLK_DEV_TRM290=m
-CONFIG_BLK_DEV_VIA82CXXX=m
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
+CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
@@ -1385,12 +1362,12 @@
#
# SCSI support type (disk, tape, CD-ROM)
#
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
@@ -1400,7 +1377,7 @@
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
-CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-CONFIG_SCSI_CXGB3_ISCSI=m
+# CONFIG_SCSI_CXGB3_ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
+# CONFIG_SCSI_7000FASST is not set
CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AHA152X=m
+# CONFIG_SCSI_AHA1542 is not set
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
-CONFIG_AIC7XXX_RESET_DELAY_MS=5000
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=32
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
-CONFIG_AIC79XX_REG_PRETTY_PRINT=y
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
-CONFIG_AIC94XX_DEBUG=y
-CONFIG_SCSI_DPT_I2O=m
+# CONFIG_AIC94XX_DEBUG is not set
+# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=m
+# CONFIG_SCSI_IN2000 is not set
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
@@ -1448,20 +1429,22 @@
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
-# CONFIG_SCSI_MPT2SAS is not set
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m-CONFIG_FCOE=m
-CONFIG_SCSI_DMX3191D=m
-CONFIG_SCSI_EATA=m
-CONFIG_SCSI_EATA_TAGGED_QUEUE=y
-CONFIG_SCSI_EATA_LINKED_COMMANDS=y
-CONFIG_SCSI_EATA_MAX_TAGS=16
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
@@ -1470,23 +1453,28 @@
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_IPR=m
-CONFIG_SCSI_IPR_TRACE=y
-CONFIG_SCSI_IPR_DUMP=y
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+# CONFIG_SCSI_SYM53C416 is not set
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
-CONFIG_SCSI_NSP32=m
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_SRP=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
@@ -1494,21 +1482,24 @@
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
-CONFIG_SCSI_DH=m CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
-# CONFIG_SCSI_OSD_INITIATOR is not set
-CONFIG_ATA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=m
+CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
-CONFIG_ATA_PIIX=m
+CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
@@ -1539,10 +1530,12 @@
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
-# CONFIG_PATA_HPT3X3_DMA is not set
+CONFIG_PATA_HPT3X3_DMA=y
+# CONFIG_PATA_ISAPNP is not set
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
+# CONFIG_PATA_LEGACY is not set
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
@@ -1555,15 +1548,17 @@
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
-CONFIG_PATA_RADISYS=m
-CONFIG_PATA_RZ1000=m
-CONFIG_PATA_SC1200=m
+CONFIG_PATA_QDI=m
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
+# CONFIG_PATA_WINBOND_VLB is not set
CONFIG_PATA_SCH=m
CONFIG_MD=y CONFIG_MD_RAID6_PQ=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_DELAY=m
+# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
-CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
-# CONFIG_FUSION_LOGGING is not set
+CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
@@ -1601,20 +1596,13 @@
#
# Enable only one of the two stacks, unless you know what you are doing
#
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=m
-CONFIG_IEEE1394_OHCI1394=m
-CONFIG_IEEE1394_PCILYNX=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_DV1394=m
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_SBP2=m
+# CONFIG_IEEE1394 is not set
CONFIG_I2O=m
-CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
@@ -1623,7 +1611,8 @@
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
-# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_IFB=m
@@ -1634,15 +1623,7 @@
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_NET_SB1000=m
-CONFIG_ARCNET=m
-CONFIG_ARCNET_1201=m
-CONFIG_ARCNET_1051=m
-CONFIG_ARCNET_RAW=m
-CONFIG_ARCNET_CAP=m
-CONFIG_ARCNET_COM90xx=m
-CONFIG_ARCNET_COM90xxIO=m
-CONFIG_ARCNET_RIM_I=m
-# CONFIG_ARCNET_COM20020 is not set
+# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
@@ -1662,32 +1643,52 @@
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MDIO_BITBANG=m
-# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
+# CONFIG_EL1 is not set
+# CONFIG_EL2 is not set
+# CONFIG_ELPLUS is not set
+# CONFIG_EL16 is not set
+CONFIG_EL3=m
+# CONFIG_3C515 is not set
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
-CONFIG_ENC28J60=m
-# CONFIG_ENC28J60_WRITEVERIFY is not set
-# CONFIG_ETHOC is not set
+# CONFIG_LANCE is not set
+CONFIG_NET_VENDOR_SMC=y
+CONFIG_ULTRA=m
+# CONFIG_SMC9194 is not set
+CONFIG_ETHOC=m
+# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-CONFIG_TULIP_NAPI=y
-CONFIG_TULIP_NAPI_HW_MITIGATION=y
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
-CONFIG_HP100=m
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+CONFIG_EWRK3=m
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=m
+# CONFIG_ZNET is not set
+# CONFIG_SEEQ8005 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -1699,12 +1700,15 @@
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
+# CONFIG_CS89x0 is not set
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
@@ -1723,7 +1727,7 @@
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
-# CONFIG_VIA_RHINE_MMIO is not set
+CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
@@ -1738,7 +1742,7 @@
CONFIG_E1000E=m
CONFIG_IP1000=m CONFIG_IGB=m
-# CONFIG_IGBVF is not set
+CONFIG_IGBVF=m
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
@@ -1756,55 +1760,52 @@
CONFIG_ATL1=m
CONFIG_ATL1E=m
# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
+CONFIG_JME=m
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=m
-# CONFIG_ENIC is not set
+CONFIG_ENIC=m
CONFIG_IXGBE=m
CONFIG_IXGB=m
CONFIG_S2IO=m
CONFIG_MYRI10GE=m
CONFIG_NIU=m
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
-# CONFIG_QLGE is not set
-CONFIG_SFC=m
-CONFIG_SFC_MTD=y
-# CONFIG_BE2NET is not set
+CONFIG_QLGE=m
+# CONFIG_SFC is not set
+CONFIG_BE2NET=m
CONFIG_TR=y
+# CONFIG_IBMTR is not set
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
-CONFIG_TMS380TR=m
-CONFIG_TMSPCI=m
-CONFIG_ABYSS=m
+# CONFIG_TMS380TR is not set
+# CONFIG_SMCTR is not set
#
# Wireless LAN
#
-CONFIG_WLAN_PRE80211=y
-CONFIG_STRIP=m
-CONFIG_PCMCIA_WAVELAN=m
-CONFIG_PCMCIA_NETWAVE=m-CONFIG_PCMCIA_RAYCS=m
+# CONFIG_PCMCIA_RAYCS is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_LIBERTAS_DEBUG=y
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
-# CONFIG_AT76C50X_USB is not set
+CONFIG_AT76C50X_USB=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
@@ -1814,17 +1815,17 @@
CONFIG_RTL8187=m
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
-# CONFIG_MWL8K is not set
+CONFIG_MWL8K=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
-# CONFIG_P54_SPI is not set
CONFIG_P54_LEDS=y
CONFIG_ATH5K=m
-# CONFIG_ATH5K_DEBUG is not set
+CONFIG_ATH5K_DEBUG=y
CONFIG_ATH9K=m
# CONFIG_ATH9K_DEBUG is not set
-# CONFIG_AR9170_USB is not set
+CONFIG_AR9170_USB=m
+CONFIG_AR9170_LEDS=y
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
@@ -1840,7 +1841,8 @@
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLWIFI_RFKILL=y
# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT is not set
-# CONFIG_IWLWIFI_DEBUG is not set
+CONFIG_IWLWIFI_DEBUG=y
+CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWLAGN=m
CONFIG_IWL4965=y
CONFIG_IWL5000=y
@@ -1859,13 +1861,14 @@
CONFIG_B43_PIO=y
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
-# CONFIG_B43_DEBUG is not set+CONFIG_B43_DEBUG=y
+# CONFIG_B43_FORCE_PIO is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_RFKILL=y
-# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
@@ -1896,9 +1899,9 @@
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_DM9601=m
-# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
@@ -1923,63 +1926,40 @@
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_PCMCIA_IBMTR=m
-CONFIG_WAN=y
-CONFIG_LANMEDIA=m
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-CONFIG_HDLC_X25=m
-CONFIG_PCI200SYN=m
-CONFIG_WANXL=m
-CONFIG_PC300TOO=m
-CONFIG_FARSYNC=m
-# CONFIG_DSCC4 is not set
-CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
-# CONFIG_WAN_ROUTER_DRIVERS is not set
-CONFIG_LAPBETHER=m
-CONFIG_X25_ASY=m
-# CONFIG_SBNI is not set
+# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
-CONFIG_ATM_DUMMY=m
+# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m-CONFIG_ATM_ZATM=m
-# CONFIG_ATM_ZATM_DEBUG is not set
+# CONFIG_ATM_ZATM is not set
CONFIG_ATM_NICSTAR=m
-CONFIG_ATM_NICSTAR_USE_SUNI=y
-CONFIG_ATM_NICSTAR_USE_IDT77105=y
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
-CONFIG_ATM_IDT77252_RCV_ALL=y
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
-CONFIG_ATM_IA=m
-# CONFIG_ATM_IA_DEBUG is not set
+# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=m
-CONFIG_ATM_FORE200E_USE_TASKLET=y
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
-CONFIG_ATM_HE_USE_SUNI=y
+# CONFIG_ATM_HE_USE_SUNI is not set
# CONFIG_ATM_SOLOS is not set
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
-CONFIG_HIPPI=y
-CONFIG_ROADRUNNER=m
-CONFIG_ROADRUNNER_LARGE_RINGS=y
+# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
@@ -1987,7 +1967,7 @@
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
@@ -1996,23 +1976,23 @@
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_VIRTIO_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
+# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
-CONFIG_ISDN_X25=y
#
# ISDN feature submodules
@@ -2033,9 +2013,9 @@
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
-# CONFIG_HISAX_NO_SENDCOMPLETE is not set
-# CONFIG_HISAX_NO_LLC is not set
-# CONFIG_HISAX_NO_KEYPAD is not set
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
@@ -2043,17 +2023,27 @@
#
# HiSax supported cards
#
+# CONFIG_HISAX_16_0 is not set
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
+# CONFIG_HISAX_AVM_A1 is not set
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
+# CONFIG_HISAX_IX1MICROR2 is not set
CONFIG_HISAX_DIEHLDIVA=y
+# CONFIG_HISAX_ASUSCOM is not set
+# CONFIG_HISAX_TELEINT is not set
+# CONFIG_HISAX_HFCS is not set
CONFIG_HISAX_SEDLBAUER=y
+# CONFIG_HISAX_SPORTSTER is not set
+# CONFIG_HISAX_MIC is not set
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
+# CONFIG_HISAX_ISURF is not set
+# CONFIG_HISAX_HSTSAPHIR is not set
CONFIG_HISAX_BKM_A4T=y CONFIG_HISAX_GAZEL=y
@@ -2061,7 +2051,7 @@
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
-CONFIG_HISAX_DEBUG=y
+# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
@@ -2075,7 +2065,7 @@
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
+# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
@@ -2083,6 +2073,10 @@
#
# Active cards
#
+# CONFIG_ISDN_DRV_ICN is not set
+# CONFIG_ISDN_DRV_PCBIT is not set
+# CONFIG_ISDN_DRV_SC is not set
+# CONFIG_ISDN_DRV_ACT2000 is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_ISDN_DRV_GIGASET=m
@@ -2090,10 +2084,10 @@
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
-CONFIG_GIGASET_UNDOCREQ=y
+# CONFIG_GIGASET_UNDOCREQ is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
+# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
@@ -2104,8 +2098,10 @@
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
+# CONFIG_ISDN_DRV_AVMB1_B1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+# CONFIG_ISDN_DRV_AVMB1_T1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
@@ -2117,20 +2113,20 @@
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m-CONFIG_PHONE=m
+# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
+CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
@@ -2143,12 +2139,11 @@
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_KEYBOARD_NEWTON=m
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
@@ -2158,12 +2153,14 @@
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_PS2_OLPC is not set
+CONFIG_MOUSE_PS2_OLPC=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_GPIO=m
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
@@ -2193,6 +2190,7 @@
CONFIG_JOYSTICK_XPAD=m+# CONFIG_JOYSTICK_WALKERA0701 is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
@@ -2200,10 +2198,7 @@
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
@@ -2212,13 +2207,11 @@
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
+# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
@@ -2243,19 +2236,18 @@
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
-# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_CT82C710=m
-CONFIG_SERIO_PARKBD=m
-CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
@@ -2272,94 +2264,100 @@
CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
+# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_COMPUTONE=m
+# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
-CONFIG_CYZ_INTR=y
-CONFIG_DIGIEPCA=m
-CONFIG_MOXA_INTELLIO=m
-CONFIG_MOXA_SMARTIO=m
-CONFIG_ISI=m
+# CONFIG_CYZ_INTR is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
-CONFIG_RISCOM8=m
-CONFIG_SPECIALIX=m
-CONFIG_SX=m
-CONFIG_RIO=m
-CONFIG_RIO_OLDPCI=y
-CONFIG_STALDRV=y
-# CONFIG_STALLION is not set
-# CONFIG_ISTALLION is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
CONFIG_NOZOMI=m
#
# Serial drivers
#
-CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_PCI=m
-CONFIG_SERIAL_8250_PNP=m
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=16
-CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
+# CONFIG_SERIAL_8250_FOURPORT is not set+# CONFIG_SERIAL_8250_BOCA is not
set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_CORE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=0
+# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
+CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
+CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
-CONFIG_IPMI_PANIC_EVENT=y
-CONFIG_IPMI_PANIC_STRING=y
+# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
-CONFIG_NVRAM=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=y
+CONFIG_DTLK=m
CONFIG_R3964=m
-CONFIG_APPLICOM=m
+# CONFIG_APPLICOM is not set
CONFIG_SONYPI=m
#
# PCMCIA character devices
# CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
-CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=4096
-# CONFIG_HPET is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_HPET=y
+# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
@@ -2400,16 +2398,15 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
-CONFIG_I2C_GPIO=m
-CONFIG_I2C_OCORES=m
-# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SIMTEC=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_TAOS_EVM=m
+# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
#
@@ -2420,75 +2417,36 @@
#
# Other I2C/SMBus bus drivers
#
+CONFIG_I2C_PCA_ISA=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_STUB=m
-CONFIG_SCx200_I2C=m
-CONFIG_SCx200_I2C_SCL=12
-CONFIG_SCx200_I2C_SDA=13
-CONFIG_SCx200_ACB=m
+# CONFIG_SCx200_ACB is not set
#
# Miscellaneous I2C Chip support
#
-CONFIG_DS1682=m
+# CONFIG_DS1682 is not set+CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_MAX6875=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=m
-CONFIG_SPI_BUTTERFLY=m
-# CONFIG_SPI_GPIO is not set
-CONFIG_SPI_LM70_LLP=m
-
-#
-# SPI Protocol Masters
-#
-CONFIG_SPI_SPIDEV=m
-CONFIG_SPI_TLE62X0=m
+# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-CONFIG_GPIO_MAX732X=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_GPIO_PCF857X=m
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-CONFIG_GPIO_MAX7301=m
-CONFIG_GPIO_MCP23S08=m
+# CONFIG_GPIOLIB is not set
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#+# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
-CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
@@ -2499,33 +2457,32 @@
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
-# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=m
-CONFIG_BATTERY_DS2760=m
-CONFIG_BATTERY_OLPC=m
-# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_OLPC=y
+CONFIG_BATTERY_BQ27x00=m
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
-CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
-# CONFIG_SENSORS_ADT7462 is not set
+CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7473=m
-# CONFIG_SENSORS_ADT7475 is not set
+CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
-# CONFIG_SENSORS_ATK0110 is not set
+CONFIG_SENSORS_ATK0110=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
@@ -2535,7 +2492,7 @@
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_FSCHMD=m
-# CONFIG_SENSORS_G760A is not set
+CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m@@ -2543,7 +2500,6 @@
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
@@ -2554,16 +2510,14 @@
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
-# CONFIG_SENSORS_LTC4215 is not set
+CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
+CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
-# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_SMSC47M1=m
@@ -2583,11 +2537,10 @@
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
-# CONFIG_SENSORS_LIS3LV02D is not set
+CONFIG_SENSORS_LIS3LV02D=m
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_THERMAL=m
-CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -2595,37 +2548,43 @@
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
-CONFIG_ACQUIRE_WDT=m
-CONFIG_ADVANTECH_WDT=m
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
-CONFIG_SC520_WDT=m
-CONFIG_EUROTECH_WDT=m
-CONFIG_IB700_WDT=m
+# CONFIG_SC520_WDT is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_IB700_WDT is not set-CONFIG_WAFER_WDT=m
+# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
-# CONFIG_IT87_WDT is not set
+CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
-CONFIG_SC1200_WDT=m
-CONFIG_SCx200_WDT=m
-CONFIG_PC87413_WDT=m
-CONFIG_60XX_WDT=m
-CONFIG_SBC8360_WDT=m
-CONFIG_SBC7240_WDT=m
-CONFIG_CPU5_WDT=m
+# CONFIG_SC1200_WDT is not set
+# CONFIG_PC87413_WDT is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_SBC7240_WDT is not set
+# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
-CONFIG_SMSC37B787_WDT=m
+# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
-# CONFIG_W83697UG_WDT is not set
+CONFIG_W83697UG_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
-CONFIG_SBC_EPX_C3_WATCHDOG=m
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
#
# PCI-based Watchdog Cards
@@ -2660,12 +2619,9 @@
#
CONFIG_MFD_CORE=m
CONFIG_MFD_SM501=m
-CONFIG_MFD_SM501_GPIO=y
-CONFIG_HTC_PASIC3=m
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+CONFIG_MFD_WM8400=m
@@ -2699,14 +2655,10 @@
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
-CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
@@ -2721,42 +2673,80 @@
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_TCM825X=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_SAA7191=m
+# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
+
+#
+# Video improvement chips
+#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
-CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
+# CONFIG_VIDEO_PMS is not set
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
@@ -2786,7 +2776,7 @@
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_MT9M001=m
-# CONFIG_SOC_CAMERA_MT9M111 is not set
+CONFIG_SOC_CAMERA_MT9M111=m
# CONFIG_SOC_CAMERA_MT9T031 is not set
CONFIG_SOC_CAMERA_MT9V022=m
# CONFIG_SOC_CAMERA_TW9910 is not set
@@ -2796,42 +2786,44 @@
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
+CONFIG_USB_M5602=m-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_OV519=m
# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-# CONFIG_VIDEO_HDPVR is not set
+CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
-# CONFIG_VIDEO_CX231XX is not set+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
@@ -2845,7 +2837,7 @@
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
-CONFIG_USB_ZC0301=m
+# CONFIG_USB_ZC0301 is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
@@ -2853,12 +2845,23 @@
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
CONFIG_USB_DSBR=m
CONFIG_USB_SI470X=m
-# CONFIG_USB_MR800 is not set
+CONFIG_USB_MR800=m
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
@@ -2878,32 +2881,7 @@
#
# Supported USB Adapters
#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-# CONFIG_DVB_USB_CXUSB is not set
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_DW2102=m
-# CONFIG_DVB_USB_CINERGY_T2 is not set
-CONFIG_DVB_USB_ANYSEE=m
-# CONFIG_DVB_USB_DTV5100 is not set
-# CONFIG_DVB_USB_AF9015 is not set
-# CONFIG_DVB_USB_CE6230 is not set
+# CONFIG_DVB_USB is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_SIANO_SMS1XXX=m
@@ -2933,11 +2911,6 @@
# CONFIG_DVB_DM1105 is not set
#
-# Supported FireWire (IEEE 1394) Adapters
-#
-# CONFIG_DVB_FIREDTV is not set
-
-#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
@@ -2948,8 +2921,6 @@
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0288=m
-CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
@@ -2961,8 +2932,6 @@
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
-CONFIG_DVB_CX24116=m
-CONFIG_DVB_SI21XX=m
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
@@ -2971,9 +2940,6 @@
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m CONFIG_DVB_S5H1411=m
CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
@@ -2998,17 +2963,17 @@
#
# Graphics support
#
-CONFIG_AGP=m
-CONFIG_AGP_ALI=m
-CONFIG_AGP_ATI=m
-CONFIG_AGP_AMD=m
-CONFIG_AGP_AMD64=m
-CONFIG_AGP_INTEL=m
-CONFIG_AGP_NVIDIA=m
-CONFIG_AGP_SIS=m
-CONFIG_AGP_SWORKS=m
-CONFIG_AGP_VIA=m
-CONFIG_AGP_EFFICEON=m
+CONFIG_AGP=y
+CONFIG_AGP_ALI=y
+CONFIG_AGP_ATI=y
+CONFIG_AGP_AMD=y
+CONFIG_AGP_AMD64=y
+CONFIG_AGP_INTEL=y
+CONFIG_AGP_NVIDIA=y
+CONFIG_AGP_SIS=y
+CONFIG_AGP_SWORKS=y
+CONFIG_AGP_VIA=y
+CONFIG_AGP_EFFICEON=y
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
@@ -3024,7 +2989,7 @@
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
@@ -3037,7 +3002,6 @@
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
@@ -3048,32 +3012,30 @@
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m-CONFIG_FB_CYBER2000=m
-CONFIG_FB_ARC=m
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
-CONFIG_FB_IMSTT=y
+# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
-CONFIG_FB_UVESA=m
+# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
-CONFIG_FB_N411=m
-CONFIG_FB_HGA=m
-CONFIG_FB_HGA_ACCEL=y
-CONFIG_FB_S1D13XXX=m
+CONFIG_FB_EFI=y
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
-CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
-CONFIG_FB_LE80578=m
-CONFIG_FB_CARILLO_RANCH=m
+# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
@@ -3081,13 +3043,15 @@
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
-# CONFIG_FB_MATROX_I2C is not set
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
-CONFIG_FB_SIS=m
-CONFIG_FB_SIS_300=y
-CONFIG_FB_SIS_315=y
-# CONFIG_FB_VIA is not set
+# CONFIG_FB_SIS is not set
+CONFIG_FB_VIA=m
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
-CONFIG_FB_VT8623=m
+# CONFIG_FB_VT8623 is not set
CONFIG_FB_TRIDENT=m
-CONFIG_FB_ARK=m
-CONFIG_FB_PM3=m
-CONFIG_FB_CARMINE=m
-CONFIG_FB_CARMINE_DRAM_EVAL=y
-# CONFIG_CARMINE_DRAM_CUSTOM is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=m
-CONFIG_FB_GEODE_GX=m
-CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_GEODE_LX=y
+CONFIG_FB_GEODE_GX=y
+# CONFIG_FB_GEODE_GX1 is not set
# CONFIG_FB_TMIO is not set
CONFIG_FB_SM501=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=y
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+# CONFIG_FB_MB862XX_PCI_GDC is not set
+CONFIG_FB_BROADSHEET=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_LTV350QV=m
-CONFIG_LCD_ILI9320=m
-# CONFIG_LCD_TDO24M is not set
-CONFIG_LCD_VGG2432A4=m
+# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=m
#
# Display device support
@@ -3154,14 +3111,18 @@
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
@@ -3177,19 +3138,22 @@
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
+CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
+CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTS64=m
@@ -3197,8 +3161,43 @@
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CS4231 is not set
+CONFIG_SND_CS4236=m
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_ES1688 is not set
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+CONFIG_SND_OPL3SA2=m
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_MIRO=m
+# CONFIG_SND_SB8 is not set
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+# CONFIG_SND_SB16_CSP is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_WAVEFRONT is not set
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
@@ -3209,7 +3208,7 @@
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
-CONFIG_SND_AW2=m
+# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
@@ -3220,7 +3219,7 @@
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
-# CONFIG_SND_CS5530 is not set
+CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
@@ -3248,7 +3247,7 @@
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
-CONFIG_SND_HDA_INPUT_BEEP=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
@@ -3287,87 +3286,63 @@
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
-CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
-# CONFIG_SND_USB_US122L is not set
-CONFIG_SND_PCMCIA=y
-CONFIG_SND_VXPOCKET=m
-CONFIG_SND_PDAUDIOCF=m
+CONFIG_SND_USB_US122L=m
+# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
-CONFIG_SOUND_PRIME=m
-CONFIG_SOUND_OSS=m
-CONFIG_SOUND_TRACEINIT=y
-CONFIG_SOUND_DMAP=y
-CONFIG_SOUND_SSCAPE=m
-CONFIG_SOUND_VMIDI=m
-CONFIG_SOUND_TRIX=m
-CONFIG_SOUND_MSS=m
-CONFIG_SOUND_MPU401=m
-CONFIG_SOUND_PAS=m
-CONFIG_SOUND_PSS=m
-CONFIG_PSS_MIXER=y
-# CONFIG_PSS_HAVE_BOOT is not set
-CONFIG_SOUND_SB=m
-CONFIG_SOUND_YM3812=m
-CONFIG_SOUND_UART6850=m
-CONFIG_SOUND_AEDSP16=m
-CONFIG_SC6600=y
-CONFIG_SC6600_JOY=y
-CONFIG_SC6600_CDROM=4
-CONFIG_SC6600_CDROMBASE=0x0-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
-CONFIG_USB_HID=m
+CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=m
-CONFIG_HID_KYE=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_KENSINGTON=m
-CONFIG_HID_LOGITECH=m
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_DRAGONRISE_FF=m
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_NTRIG=m
-CONFIG_HID_PANTHERLORD=m
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
# CONFIG_GREENASIA_FF is not set
-CONFIG_HID_TOPSEED=m
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+CONFIG_HID_TOPSEED=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=m
+CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
@@ -3379,43 +3354,38 @@
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
-CONFIG_USB_MON=m
+CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
-CONFIG_USB_C67X00_HCD=m
-CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
-CONFIG_USB_ISP116X_HCD=m
-CONFIG_USB_ISP1760_HCD=m
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_HCD_SSB is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_U132_HCD is not set
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_SL811_CS is not set
#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
-# CONFIG_USB_TMC is not set
+CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
@@ -3458,7 +3428,7 @@
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP210X is not set
+CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -3468,23 +3438,11 @@
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
+# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
@@ -3501,7 +3459,7 @@
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_SYMBOL=m CONFIG_USB_SERIAL_XIRCOM=m
@@ -3516,14 +3474,14 @@
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
-# CONFIG_USB_SEVSEG is not set
-CONFIG_USB_RIO500=m
+CONFIG_USB_SEVSEG=m
+# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
@@ -3534,7 +3492,7 @@
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
-# CONFIG_USB_VST is not set
+CONFIG_USB_VST=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
@@ -3544,8 +3502,8 @@
#
# OTG and related infrastructure
#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_OTG_UTILS=y
+CONFIG_NOP_USB_XCEIV=m
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
@@ -3557,7 +3515,7 @@
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
-CONFIG_MMC_TEST=m
+# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
@@ -3583,38 +3541,32 @@
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CLASS=y
#
-CONFIG_LEDS_NET48XX=m
-CONFIG_LEDS_WRAP=m
# CONFIG_LEDS_ALIX2 is not set
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_LP5521=m
CONFIG_LEDS_CLEVO_MAIL=m
-CONFIG_LEDS_PCA955X=m
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_BD2802=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_EDAC=y
#
@@ -3628,16 +3580,18 @@
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
-# CONFIG_EDAC_X38 is not set
+CONFIG_EDAC_X38=m
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
+CONFIG_EDAC_AMD8131=m
+CONFIG_EDAC_AMD8111=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
@@ -3645,8 +3599,8 @@
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_TEST=m
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
@@ -3662,34 +3616,27 @@
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
-CONFIG_RTC_DRV_S35390A=m
+# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
-# CONFIG_RTC_DRV_RX8581 is not set
+CONFIG_RTC_DRV_RX8581=m
#
# SPI RTC drivers
#
-CONFIG_RTC_DRV_M41T94=m
-CONFIG_RTC_DRV_DS1305=m
-# CONFIG_RTC_DRV_DS1390 is not set
-CONFIG_RTC_DRV_MAX6902=m
-CONFIG_RTC_DRV_R9701=m
-CONFIG_RTC_DRV_RS5C348=m
-# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
-CONFIG_RTC_DRV_CMOS=m
-# CONFIG_RTC_DRV_DS1286 is not set
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
-CONFIG_RTC_DRV_M48T86=m
-# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
-# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_V3020=m
# CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_SMX=m
-# CONFIG_UIO_AEC is not set
-# CONFIG_UIO_SERCOS3 is not set
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
@@ -3719,12 +3666,11 @@
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
-CONFIG_STAGING=y
-CONFIG_STAGING_EXCLUDE_BUILD=y
+# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ASUS_LAPTOP=m
-# CONFIG_DELL_WMI is not set
+CONFIG_DELL_WMI=m
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_TC1100_WMI=m
@@ -3741,8 +3687,8 @@
CONFIG_THINKPAD_ACPI_BAY=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
-CONFIG_INTEL_MENLOW=m
-CONFIG_EEEPC_LAPTOP=m
+# CONFIG_INTEL_MENLOW is not set
+# CONFIG_EEEPC_LAPTOP is not set
CONFIG_ACPI_WMI=m
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_TOSHIBA=m
@@ -3753,6 +3699,7 @@
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
@@ -3766,21 +3713,26 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y-CONFIG_JBD_DEBUG=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
-CONFIG_FS_MBCACHE=m
+CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
@@ -3788,20 +3740,20 @@
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
-CONFIG_JFS_STATISTICS=y
+# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
+# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
# CONFIG_GFS2_FS_LOCKING_DLM is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
-CONFIG_OCFS2_FS_STATS=y
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_OCFS2_FS_POSIX_ACL is not set
@@ -3811,12 +3763,12 @@
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=m
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=y+# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
@@ -3842,27 +3794,25 @@
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
+# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
@@ -3875,33 +3825,25 @@
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=y
+CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
-CONFIG_HPFS_FS=m
+# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
@@ -3910,8 +3852,9 @@
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
+# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_EXOFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
@@ -3934,8 +3877,7 @@
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
@@ -3953,8 +3895,7 @@
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FS is not set
#
# Partition Types
@@ -3962,25 +3903,24 @@
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
+# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
-CONFIG_ULTRIX_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_SYSV68_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
@@ -4003,7 +3943,7 @@
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
+CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
@@ -4019,7 +3959,7 @@
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
+CONFIG_DLM_DEBUG=y
#
# Kernel hacking
@@ -4027,23 +3967,28 @@
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ALLOW_WARNINGS=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set+CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -4051,35 +3996,34 @@
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
+CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-CONFIG_RCU_TORTURE_TEST=m
+CONFIG_BOOT_PRINTK_DELAY=y
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-CONFIG_LKDTM=m
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set-CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -4087,30 +4031,32 @@
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+CONFIG_BUILD_DOCSRC=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
+CONFIG_KGDB=y
+CONFIG_KGDB_SERIAL_CONSOLE=y
+CONFIG_KGDB_TESTS=y
+# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
-# CONFIG_STRICT_DEVMEM is not set
-CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_STRICT_DEVMEM=y
+# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_4KSTACKS is not set
+CONFIG_4KSTACKS=y
CONFIG_DOUBLEFAULT=y
CONFIG_X86_DS_SELFTEST=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
@@ -4123,9 +4069,9 @@
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DEBUG_BOOT_PARAMS is not set
+CONFIG_DEBUG_BOOT_PARAMS=y+CONFIG_OPTIMIZE_INLINING=y
#
# Security options
@@ -4135,18 +4081,20 @@
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
+CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_XOR_BLOCKS=m
@@ -4158,7 +4106,7 @@
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
@@ -4175,7 +4123,7 @@
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
@@ -4207,15 +4155,15 @@
# Digest
#
CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CRC32C_INTEL is not set
+CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
@@ -4240,7 +4188,7 @@
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_TWOFISH is not set
+CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
@@ -4248,27 +4196,30 @@
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_DEV_PADLOCK=m
-CONFIG_CRYPTO_DEV_PADLOCK_AES=m
-CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_GEODE=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
-# CONFIG_KVM is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTIO_BALLOON is not set
-CONFIG_BINARY_PRINTF=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_TRACE=y
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -4279,10 +4230,10 @@
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
-CONFIG_CRC7=m
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
</CODE>
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Wed, 22 Jul 2009 20:32:33 +0300
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Thu, Jul 23, 2009 at 01:17:23AM +0800, Teo En Ming (Zhang Enming) wrote:
> Dear Pasik,
>
> This morning when I go to office i will examine the differences between
> your .config and my .config using diff and create a patch. I will then
> look through the generated patch file and patch my .config accordingly.
>
Yep.
Just remember my .config is a mess; it's originally based on some Fedora 10
default kernel, and then changed many times after that..
But it works for me :)
I've been compiling and running on Fedora 10 and Fedora 11, using Xen 3.3.1
and Xen 3.4.0.
-- Pasi
> Regards,
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
> Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> Teo En Ming (Zhang Enming) wrote:
> >Hi Pasik
> >
> >I suspect that the Z0_startup_32 error has something to do with
> >compiling 32-bit xen kernels. The problem may not appear when
> >compiling 64-bit xen kernels.
> >
> >Pasi Kärkkäinen wrote:
> >>On Wed, Jul 22, 2009 at 07:04:48PM +0300, Pasi Kärkkäinen wrote:
> >>
> >>>On Wed, Jul 22, 2009 at 11:47:11PM +0800, Teo En Ming wrote:
> >>>
> >>>>OOOPS! I still got an error compiling the kernel image. Please advise.
> >>>>See console output below.
> >>>>
> >>>>
> >>>
<http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.30-rc6-tip-next-n
o-highpte>
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.30-rc6-tip-next-no
-highpte
> >>>
> >>>That's some random .config from me.. it should work. It works for me.
> >>>
> >>>
> >>
> >>I was using that .config with xen-tip/next pv_ops dom0 kernel.
> >>
> >>-- Pasi
> >>
> >>_______________________________________________
> >>Xen-devel mailing list
> >>Xen-devel@lists.xensource.com
> >>http://lists.xensource.com/xen-devel
> >>
> >
> >------------------------------------------------------------------------
> >
> >
> >No virus found in this outgoing message.
> >Checked by AVG - www.avg.com
> >Version: 8.5.392 / Virus Database: 270.13.20/2251 - Release Date:
07/20/09
> >18:29:00
> >
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >Xen-devel mailing list
> >Xen-devel@lists.xensource.com
> >http://lists.xensource.com/xen-devel
> >
>
>
> No virus found in this outgoing message.
> Checked by AVG - www.avg.com
> Version: 8.5.392 / Virus Database: 270.13.20/2251 - Release Date: 07/20/09
18:29:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.13.22/2253 - Release Date: 07/21/09
18:02:00
[-- Attachment #1.2: Type: text/html, Size: 137851 bytes --]
[-- Attachment #2: ATT00258.txt --]
[-- Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-23 9:19 ` Teo En Ming
@ 2009-07-23 9:12 ` Teo En Ming
2009-07-23 10:02 ` Teo En Ming
2009-07-23 10:09 ` Pasi Kärkkäinen
0 siblings, 2 replies; 86+ messages in thread
From: Teo En Ming @ 2009-07-23 9:12 UTC (permalink / raw)
To: Teo En Ming, 'Pasi Kärkkäinen'
Cc: xen-devel, jeremy.fitzhardinge
[-- Attachment #1.1: Type: text/plain, Size: 114409 bytes --]
Hi,
I have successfully booted up the pvops enabled Xen Dom 0 kernel but it
seems I cannot start the xend daemon.
It complains:
grep: /proc/xen/capabilities: No such file or directory
My /etc/fstab is as follows:
/dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part1 swap swap
defaults 0 0
/dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part2 / ext3
acl,user_xattr 1 1
/dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part3 /home ext3
acl,user_xattr 1 2
proc /proc proc defaults 0
0
sysfs /sys sysfs noauto 0
0
debugfs /sys/kernel/debug debugfs noauto 0
0
devpts /dev/pts devpts mode=0620,gid=5 0
0
none /proc/xen xenfs defaults 0
0
Please also see
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-self-compiled-paravirt-ops-pvops.html
Thank you!
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "'Teo En Ming'" <enming.teo@asiasoftsea.net>, 'Pasi Kärkkäinen'
<pasik@iki.fi>
Cc: <xen-devel@lists.xensource.com>, <jeremy.fitzhardinge@citrix.com>
Date: Thu, 23 Jul 2009 17:19:31 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
kernel modules build success!
<CODE>
IHEX2FW firmware/whiteheat_loader.fw
IHEX2FW firmware/whiteheat.fw
IHEX2FW firmware/keyspan_pda/keyspan_pda.fw
IHEX2FW firmware/keyspan_pda/xircom_pgs.fw
H16TOFW firmware/vicam/firmware.fw
IHEX firmware/cpia2/stv0672_vp4.bin
IHEX firmware/yam/1200.bin
IHEX firmware/yam/9600.bin
</CODE>
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore
529541
Republic
of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "'Teo En Ming'" <enming.teo@asiasoftsea.net>, 'Pasi
Kärkkäinen' <pasik@iki.fi>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Thu, 23 Jul 2009 11:27:38 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Dear Pasik,
Success in compiling the Xen Dom 0 paravirt ops enabled kernel!
<CODE>
LD
Documentation/video4linux/built-in.o
HOSTCC Documentation/video4linux/v4lgrab
LD Documentation/vm/built-in.o
HOSTCC Documentation/vm/slabinfo
LD Documentation/watchdog/src/built-in.o
HOSTCC Documentation/watchdog/src/watchdog-simple
HOSTCC Documentation/watchdog/src/watchdog-test
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
CC arch/x86/boot/a20.o
AS arch/x86/boot/bioscall.o
CC arch/x86/boot/cmdline.o
AS arch/x86/boot/copy.o
HOSTCC arch/x86/boot/mkcpustr
CPUSTR arch/x86/boot/cpustr.h
CC arch/x86/boot/cpu.o
CC arch/x86/boot/cpucheck.o
CC arch/x86/boot/edd.o
VOFFSET arch/x86/boot/voffset.h
LDS arch/x86/boot/compressed/vmlinux.lds
AS arch/x86/boot/compressed/head_32.o
CC arch/x86/boot/compressed/misc.o
OBJCOPY arch/x86/boot/compressed/vmlinux.bin
HOSTCC arch/x86/boot/compressed/relocs
RELOCS arch/x86/boot/compressed/vmlinux.relocs
GZIP arch/x86/boot/compressed/vmlinux.bin.gz
HOSTCC arch/x86/boot/compressed/mkpiggy
MKPIGGY arch/x86/boot/compressed/piggy.S
AS arch/x86/boot/compressed/piggy.o
LD arch/x86/boot/compressed/vmlinux
ZOFFSET arch/x86/boot/zoffset.h
AS arch/x86/boot/header.o
CC arch/x86/boot/main.o
CC arch/x86/boot/mca.o
CC arch/x86/boot/memory.o
CC arch/x86/boot/pm.o
AS arch/x86/boot/pmjump.o
CC arch/x86/boot/printf.o
CC arch/x86/boot/regs.o
CC arch/x86/boot/string.o
CC arch/x86/boot/tty.o
CC arch/x86/boot/video.o
CC arch/x86/boot/video-mode.o
CC arch/x86/boot/version.o
CC arch/x86/boot/apm.o
CC arch/x86/boot/video-vga.o
CC arch/x86/boot/video-vesa.o
CC arch/x86/boot/video-bios.o
LD arch/x86/boot/setup.elf
OBJCOPY arch/x86/boot/setup.bin
OBJCOPY arch/x86/boot/vmlinux.bin
HOSTCC arch/x86/boot/tools/build
BUILD arch/x86/boot/bzImage
Root device is (8, 2)
Setup is 13932 bytes (padded to 14336 bytes).
System is 2784 kB
CRC 17b52ba1
Kernel: arch/x86/boot/bzImage is ready (#4)
</CODE>
Thank you!!!
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore
529541
Republic
of Singapore
Mobile Phone:
+65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Thu, 23 Jul 2009 10:21:39 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Dear Pasik,
I just did a diff this morning. Here are the differences between my
kernel configuration and your kernel configuration.
<CODE>
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
-CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEM_RES_CTLR=y
-# CONFIG_CGROUP_MEM_RES_CTLR_SWAP is not set
-CONFIG_MM_OWNER=y
+# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
@@ -135,7 +131,7 @@
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -158,15 +154,15 @@
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
-CONFIG_OPROFILE=m
-# CONFIG_OPROFILE_IBS is not set
+# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -182,10 +178,10 @@
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
@@ -205,24 +201,24 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
-# CONFIG_SPARSE_IRQ is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_RDC321X is not set
-CONFIG_X86_32_NON_STANDARD=y
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
+# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
@@ -235,25 +231,24 @@
CONFIG_XEN_PRIVILEGED_GUEST=y
# CONFIG_XEN_PCI_PASSTHROUGH_DEBUG is not set
CONFIG_MICROCODE_XEN=y
-# CONFIG_VMI is not set
+CONFIG_VMI=y
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
-# CONFIG_PARAVIRT_SPINLOCKS is not set
+CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_MEMTEST is not set
-CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
-CONFIG_M686=y
+# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
-# CONFIG_MPENTIUM4 is not set
+CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
@@ -274,9 +269,8 @@
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=5
+CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
-CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
@@ -296,21 +290,24 @@
CONFIG_CPU_SUP_UMC_32=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
-# CONFIG_HPET_TIMER is not set
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=8
-# CONFIG_SCHED_SMT is not set
+CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
-# CONFIG_X86_MCE is not set
+CONFIG_X86_MCE=y
+# CONFIG_X86_MCE_NONFATAL is not set
+CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
@@ -350,7 +347,7 @@
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_MMU_NOTIFIER=y
-# CONFIG_HIGHPTE is not set
+CONFIG_HIGHPTE=n
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
@@ -359,23 +356,23 @@
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
-# CONFIG_EFI is not set
+CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
+# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x1000000
+CONFIG_CRASH_DUMP=y
+CONFIG_PHYSICAL_START=0x400000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
-CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_PHYSICAL_ALIGN=0x400000
CONFIG_HOTPLUG_CPU=y
-CONFIG_COMPAT_VDSO=y
+# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -383,10 +380,15 @@
# Power management and ACPI options
#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_TRACE=y
+CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
@@ -395,32 +397,75 @@
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
-CONFIG_ACPI_AC=m
-CONFIG_ACPI_BATTERY=m
-CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
-CONFIG_ACPI_FAN=m
+CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_THERMAL=m
-CONFIG_ACPI_CUSTOM_DSDT_FILE=""
+CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=2001
-CONFIG_ACPI_DEBUG=y
-# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
+CONFIG_ACPI_BLACKLIST_YEAR=1999
+# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
-CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=m
-# CONFIG_APM is not set
+CONFIG_X86_APM_BOOT=y
+CONFIG_APM=y
+# CONFIG_APM_IGNORE_USER_SUSPEND is not set
+# CONFIG_APM_DO_ENABLE is not set
+CONFIG_APM_CPU_IDLE=y
+# CONFIG_APM_DISPLAY_BLANK is not set
+# CONFIG_APM_ALLOW_INTS is not set
#
# CPU Frequency scaling
#
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m+
+#
+# CPUFreq processor drivers
+#
+CONFIG_X86_ACPI_CPUFREQ=m
+# CONFIG_X86_POWERNOW_K6 is not set
+CONFIG_X86_POWERNOW_K7=y
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+# CONFIG_X86_GX_SUSPMOD is not set
+# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
+CONFIG_X86_SPEEDSTEP_ICH=y
+CONFIG_X86_SPEEDSTEP_SMI=y
+CONFIG_X86_P4_CLOCKMOD=m
+# CONFIG_X86_CPUFREQ_NFORCE2 is not set
+CONFIG_X86_LONGRUN=y
+# CONFIG_X86_LONGHAUL is not set
+CONFIG_X86_E_POWERSAVER=y
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=y
+# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
@@ -451,15 +496,15 @@
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
-# CONFIG_ISA is not set
+CONFIG_ISA=y
+# CONFIG_EISA is not set
# CONFIG_MCA is not set
-CONFIG_SCx200=m
-CONFIG_SCx200HR_TIMER=m
+# CONFIG_SCx200 is not set
CONFIG_OLPC=y
CONFIG_K8_NB=y
-CONFIG_PCCARD=m
+CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
@@ -475,17 +520,19 @@
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
+CONFIG_I82365=m
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_IBM is not set
-CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
-CONFIG_HOTPLUG_PCI_CPCI=y
-CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
-CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
-CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
@@ -493,22 +540,22 @@
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
-CONFIG_PACKET=m
+CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
@@ -561,12 +608,12 @@
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
+CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
@@ -582,8 +629,9 @@
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -596,7 +644,7 @@
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
@@ -615,8 +663,8 @@
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
@@ -628,6 +676,7 @@
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
@@ -637,7 +686,7 @@
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_DCCP=m@@ -657,9 +706,11 @@
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
@@ -701,17 +752,17 @@
#
# IP: Netfilter Configuration
#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
@@ -766,7 +817,7 @@
#
# DECnet: Netfilter Configuration
#
-CONFIG_DECNET_NF_GRABULATOR=m
+# CONFIG_DECNET_NF_GRABULATOR is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -805,19 +856,21 @@
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
-# CONFIG_NET_DCCPPROBE is not set
+CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set-# CONFIG_TIPC is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
-CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
+# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_STP=m
@@ -829,21 +882,21 @@
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
-CONFIG_LLC2=m
+# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
+# CONFIG_LTPC is not set
+# CONFIG_COPS is not set
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
-CONFIG_X25=m
-CONFIG_LAPB=m
-CONFIG_ECONET=m
-# CONFIG_ECONET_AUNUDP is not set
-# CONFIG_ECONET_NATIVE is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
+CONFIG_PHONET=m
CONFIG_NET_SCHED=y
#
@@ -881,7 +934,13 @@
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_CLS_CGROUP is not set
-# CONFIG_NET_EMATCH is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m@@ -892,7 +951,7 @@
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
-# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
@@ -900,7 +959,7 @@
# Network testing
#
CONFIG_NET_PKTGEN=m
-CONFIG_NET_TCPPROBE=m
+# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
@@ -918,6 +977,9 @@
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
+CONFIG_SCC=m
+# CONFIG_SCC_DELAY is not set
+CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
@@ -940,13 +1002,13 @@
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
+# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
+CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
@@ -1017,14 +1079,12 @@
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
-CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-CONFIG_RXKAD=m
+# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not set+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
@@ -1057,14 +1117,14 @@
#
# Generic Driver Options
#
-CONFIG_UEVENT_HELPER_PATH=""
-# CONFIG_STANDALONE is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_DEBUG_DEVRES=y
CONFIG_SYS_HYPERVISOR=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
@@ -1083,15 +1143,15 @@
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
-CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
CONFIG_RFD_FTL=m
-# CONFIG_SSFDC is not set
+CONFIG_SSFDC=m
CONFIG_MTD_OOPS=m
#
@@ -1100,11 +1160,7 @@
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y@@ -1115,49 +1171,43 @@
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
-CONFIG_MTD_SBC_GXX=m
-CONFIG_MTD_SCx200_DOCFLASH=m
-CONFIG_MTD_AMD76XROM=m
-CONFIG_MTD_ICHXROM=m
+# CONFIG_MTD_SBC_GXX is not set
+# CONFIG_MTD_AMD76XROM is not set
+# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
-CONFIG_MTD_NETtel=m
-CONFIG_MTD_DILNETPC=m
-CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
-CONFIG_MTD_L440GX=m
+# CONFIG_MTD_NETtel is not set
+# CONFIG_MTD_DILNETPC is not set
+# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
-CONFIG_MTD_INTEL_VR_NOR=m
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
-CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
@@ -1166,15 +1216,9 @@
#
# Disk-On-Chip Device Drivers
#
-CONFIG_MTD_DOC2000=m
-CONFIG_MTD_DOC2001=m
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-CONFIG_MTD_DOCPROBE_ADVANCED=y
-CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
-CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_DOCPROBE_55AA=y
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
@@ -1183,17 +1227,13 @@
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
-# CONFIG_MTD_NAND_CS553X is not set
+CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
+# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ALAUDA=m
-CONFIG_MTD_ONENAND=m
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-CONFIG_MTD_ONENAND_OTP=y
-CONFIG_MTD_ONENAND_2X_PROGRAM=y
-CONFIG_MTD_ONENAND_SIM=m
+# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
@@ -1215,11 +1255,11 @@
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_PC_SUPERIO=y
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
@@ -1228,9 +1268,12 @@
#
# Protocols
#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
+# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE=m
#
@@ -1267,116 +1310,50 @@
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=64000
-CONFIG_BLK_DEV_XIP=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
-CONFIG_CDROM_PKTCDVD_WCACHE=y
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=y
+CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
-CONFIG_PHANTOM=m
+# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
-# CONFIG_ICS932S401 is not set
+CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HP_ILO=m
# CONFIG_DELL_LAPTOP is not set
# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
+CONFIG_C2PORT=m
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_93CX6=m
CONFIG_HAVE_IDE=y
-CONFIG_IDE=m
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=m
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-CONFIG_BLK_DEV_IDECS=m
-CONFIG_BLK_DEV_DELKIN=m
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEACPI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-CONFIG_BLK_DEV_PLATFORM=m
-CONFIG_BLK_DEV_CMD640=m
-CONFIG_BLK_DEV_CMD640_ENHANCED=y
-CONFIG_BLK_DEV_IDEPNP=m
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_BLK_DEV_OFFBOARD=y
-CONFIG_BLK_DEV_GENERIC=m
-CONFIG_BLK_DEV_OPTI621=m
-CONFIG_BLK_DEV_RZ1000=m
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-CONFIG_BLK_DEV_AEC62XX=m
-CONFIG_BLK_DEV_ALI15X3=m
-CONFIG_BLK_DEV_AMD74XX=m
-CONFIG_BLK_DEV_ATIIXP=m
-CONFIG_BLK_DEV_CMD64X=m
-CONFIG_BLK_DEV_TRIFLEX=m
-CONFIG_BLK_DEV_CS5520=m-# CONFIG_BLK_DEV_CS5536 is not set
-CONFIG_BLK_DEV_HPT366=m
-CONFIG_BLK_DEV_JMICRON=m
-CONFIG_BLK_DEV_SC1200=m
-CONFIG_BLK_DEV_PIIX=m
-# CONFIG_BLK_DEV_IT8172 is not set
-CONFIG_BLK_DEV_IT8213=m
-CONFIG_BLK_DEV_IT821X=m
-CONFIG_BLK_DEV_NS87415=m
-CONFIG_BLK_DEV_PDC202XX_OLD=m
-CONFIG_BLK_DEV_PDC202XX_NEW=m
-CONFIG_BLK_DEV_SVWKS=m
-CONFIG_BLK_DEV_SIIMAGE=m
-CONFIG_BLK_DEV_SIS5513=m
-CONFIG_BLK_DEV_SLC90E66=m
-CONFIG_BLK_DEV_TRM290=m
-CONFIG_BLK_DEV_VIA82CXXX=m
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
+CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
@@ -1385,12 +1362,12 @@
#
# SCSI support type (disk, tape, CD-ROM)
#
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
@@ -1400,7 +1377,7 @@
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
-CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-CONFIG_SCSI_CXGB3_ISCSI=m
+# CONFIG_SCSI_CXGB3_ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
+# CONFIG_SCSI_7000FASST is not set
CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AHA152X=m
+# CONFIG_SCSI_AHA1542 is not set
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
-CONFIG_AIC7XXX_RESET_DELAY_MS=5000
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=32
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
-CONFIG_AIC79XX_REG_PRETTY_PRINT=y
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
-CONFIG_AIC94XX_DEBUG=y
-CONFIG_SCSI_DPT_I2O=m
+# CONFIG_AIC94XX_DEBUG is not set
+# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=m
+# CONFIG_SCSI_IN2000 is not set
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
@@ -1448,20 +1429,22 @@
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
-# CONFIG_SCSI_MPT2SAS is not set
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m-CONFIG_FCOE=m
-CONFIG_SCSI_DMX3191D=m
-CONFIG_SCSI_EATA=m
-CONFIG_SCSI_EATA_TAGGED_QUEUE=y
-CONFIG_SCSI_EATA_LINKED_COMMANDS=y
-CONFIG_SCSI_EATA_MAX_TAGS=16
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
@@ -1470,23 +1453,28 @@
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_IPR=m
-CONFIG_SCSI_IPR_TRACE=y
-CONFIG_SCSI_IPR_DUMP=y
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+# CONFIG_SCSI_SYM53C416 is not set
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
-CONFIG_SCSI_NSP32=m
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_SRP=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
@@ -1494,21 +1482,24 @@
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
-CONFIG_SCSI_DH=m CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
-# CONFIG_SCSI_OSD_INITIATOR is not set
-CONFIG_ATA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=m
+CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
-CONFIG_ATA_PIIX=m
+CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
@@ -1539,10 +1530,12 @@
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
-# CONFIG_PATA_HPT3X3_DMA is not set
+CONFIG_PATA_HPT3X3_DMA=y
+# CONFIG_PATA_ISAPNP is not set
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
+# CONFIG_PATA_LEGACY is not set
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
@@ -1555,15 +1548,17 @@
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
-CONFIG_PATA_RADISYS=m
-CONFIG_PATA_RZ1000=m
-CONFIG_PATA_SC1200=m
+CONFIG_PATA_QDI=m
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
+# CONFIG_PATA_WINBOND_VLB is not set
CONFIG_PATA_SCH=m
CONFIG_MD=y CONFIG_MD_RAID6_PQ=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_DELAY=m
+# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
-CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
-# CONFIG_FUSION_LOGGING is not set
+CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
@@ -1601,20 +1596,13 @@
#
# Enable only one of the two stacks, unless you know what you are doing
#
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=m
-CONFIG_IEEE1394_OHCI1394=m
-CONFIG_IEEE1394_PCILYNX=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_DV1394=m
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_SBP2=m
+# CONFIG_IEEE1394 is not set
CONFIG_I2O=m
-CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
@@ -1623,7 +1611,8 @@
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
-# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_IFB=m
@@ -1634,15 +1623,7 @@
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_NET_SB1000=m
-CONFIG_ARCNET=m
-CONFIG_ARCNET_1201=m
-CONFIG_ARCNET_1051=m
-CONFIG_ARCNET_RAW=m
-CONFIG_ARCNET_CAP=m
-CONFIG_ARCNET_COM90xx=m
-CONFIG_ARCNET_COM90xxIO=m
-CONFIG_ARCNET_RIM_I=m
-# CONFIG_ARCNET_COM20020 is not set
+# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
@@ -1662,32 +1643,52 @@
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MDIO_BITBANG=m
-# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
+# CONFIG_EL1 is not set
+# CONFIG_EL2 is not set
+# CONFIG_ELPLUS is not set
+# CONFIG_EL16 is not set
+CONFIG_EL3=m
+# CONFIG_3C515 is not set
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
-CONFIG_ENC28J60=m
-# CONFIG_ENC28J60_WRITEVERIFY is not set
-# CONFIG_ETHOC is not set
+# CONFIG_LANCE is not set
+CONFIG_NET_VENDOR_SMC=y
+CONFIG_ULTRA=m
+# CONFIG_SMC9194 is not set
+CONFIG_ETHOC=m
+# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-CONFIG_TULIP_NAPI=y
-CONFIG_TULIP_NAPI_HW_MITIGATION=y
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
-CONFIG_HP100=m
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+CONFIG_EWRK3=m
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=m
+# CONFIG_ZNET is not set
+# CONFIG_SEEQ8005 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -1699,12 +1700,15 @@
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
+# CONFIG_CS89x0 is not set
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
@@ -1723,7 +1727,7 @@
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
-# CONFIG_VIA_RHINE_MMIO is not set
+CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
@@ -1738,7 +1742,7 @@
CONFIG_E1000E=m
CONFIG_IP1000=m CONFIG_IGB=m
-# CONFIG_IGBVF is not set
+CONFIG_IGBVF=m
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
@@ -1756,55 +1760,52 @@
CONFIG_ATL1=m
CONFIG_ATL1E=m
# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
+CONFIG_JME=m
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=m
-# CONFIG_ENIC is not set
+CONFIG_ENIC=m
CONFIG_IXGBE=m
CONFIG_IXGB=m
CONFIG_S2IO=m
CONFIG_MYRI10GE=m
CONFIG_NIU=m
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
-# CONFIG_QLGE is not set
-CONFIG_SFC=m
-CONFIG_SFC_MTD=y
-# CONFIG_BE2NET is not set
+CONFIG_QLGE=m
+# CONFIG_SFC is not set
+CONFIG_BE2NET=m
CONFIG_TR=y
+# CONFIG_IBMTR is not set
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
-CONFIG_TMS380TR=m
-CONFIG_TMSPCI=m
-CONFIG_ABYSS=m
+# CONFIG_TMS380TR is not set
+# CONFIG_SMCTR is not set
#
# Wireless LAN
#
-CONFIG_WLAN_PRE80211=y
-CONFIG_STRIP=m
-CONFIG_PCMCIA_WAVELAN=m
-CONFIG_PCMCIA_NETWAVE=m-CONFIG_PCMCIA_RAYCS=m
+# CONFIG_PCMCIA_RAYCS is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_LIBERTAS_DEBUG=y
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
-# CONFIG_AT76C50X_USB is not set
+CONFIG_AT76C50X_USB=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
@@ -1814,17 +1815,17 @@
CONFIG_RTL8187=m
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
-# CONFIG_MWL8K is not set
+CONFIG_MWL8K=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
-# CONFIG_P54_SPI is not set
CONFIG_P54_LEDS=y
CONFIG_ATH5K=m
-# CONFIG_ATH5K_DEBUG is not set
+CONFIG_ATH5K_DEBUG=y
CONFIG_ATH9K=m
# CONFIG_ATH9K_DEBUG is not set
-# CONFIG_AR9170_USB is not set
+CONFIG_AR9170_USB=m
+CONFIG_AR9170_LEDS=y
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
@@ -1840,7 +1841,8 @@
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLWIFI_RFKILL=y
# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT is not set
-# CONFIG_IWLWIFI_DEBUG is not set
+CONFIG_IWLWIFI_DEBUG=y
+CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWLAGN=m
CONFIG_IWL4965=y
CONFIG_IWL5000=y
@@ -1859,13 +1861,14 @@
CONFIG_B43_PIO=y
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
-# CONFIG_B43_DEBUG is not set+CONFIG_B43_DEBUG=y
+# CONFIG_B43_FORCE_PIO is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_RFKILL=y
-# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
@@ -1896,9 +1899,9 @@
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_DM9601=m
-# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
@@ -1923,63 +1926,40 @@
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_PCMCIA_IBMTR=m
-CONFIG_WAN=y
-CONFIG_LANMEDIA=m
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-CONFIG_HDLC_X25=m
-CONFIG_PCI200SYN=m
-CONFIG_WANXL=m
-CONFIG_PC300TOO=m
-CONFIG_FARSYNC=m
-# CONFIG_DSCC4 is not set
-CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
-# CONFIG_WAN_ROUTER_DRIVERS is not set
-CONFIG_LAPBETHER=m
-CONFIG_X25_ASY=m
-# CONFIG_SBNI is not set
+# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
-CONFIG_ATM_DUMMY=m
+# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m-CONFIG_ATM_ZATM=m
-# CONFIG_ATM_ZATM_DEBUG is not set
+# CONFIG_ATM_ZATM is not set
CONFIG_ATM_NICSTAR=m
-CONFIG_ATM_NICSTAR_USE_SUNI=y
-CONFIG_ATM_NICSTAR_USE_IDT77105=y
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
-CONFIG_ATM_IDT77252_RCV_ALL=y
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
-CONFIG_ATM_IA=m
-# CONFIG_ATM_IA_DEBUG is not set
+# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=m
-CONFIG_ATM_FORE200E_USE_TASKLET=y
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
-CONFIG_ATM_HE_USE_SUNI=y
+# CONFIG_ATM_HE_USE_SUNI is not set
# CONFIG_ATM_SOLOS is not set
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
-CONFIG_HIPPI=y
-CONFIG_ROADRUNNER=m
-CONFIG_ROADRUNNER_LARGE_RINGS=y
+# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
@@ -1987,7 +1967,7 @@
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
@@ -1996,23 +1976,23 @@
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_VIRTIO_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
+# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
-CONFIG_ISDN_X25=y
#
# ISDN feature submodules
@@ -2033,9 +2013,9 @@
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
-# CONFIG_HISAX_NO_SENDCOMPLETE is not set
-# CONFIG_HISAX_NO_LLC is not set
-# CONFIG_HISAX_NO_KEYPAD is not set
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
@@ -2043,17 +2023,27 @@
#
# HiSax supported cards
#
+# CONFIG_HISAX_16_0 is not set
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
+# CONFIG_HISAX_AVM_A1 is not set
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
+# CONFIG_HISAX_IX1MICROR2 is not set
CONFIG_HISAX_DIEHLDIVA=y
+# CONFIG_HISAX_ASUSCOM is not set
+# CONFIG_HISAX_TELEINT is not set
+# CONFIG_HISAX_HFCS is not set
CONFIG_HISAX_SEDLBAUER=y
+# CONFIG_HISAX_SPORTSTER is not set
+# CONFIG_HISAX_MIC is not set
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
+# CONFIG_HISAX_ISURF is not set
+# CONFIG_HISAX_HSTSAPHIR is not set
CONFIG_HISAX_BKM_A4T=y CONFIG_HISAX_GAZEL=y
@@ -2061,7 +2051,7 @@
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
-CONFIG_HISAX_DEBUG=y
+# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
@@ -2075,7 +2065,7 @@
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
+# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
@@ -2083,6 +2073,10 @@
#
# Active cards
#
+# CONFIG_ISDN_DRV_ICN is not set
+# CONFIG_ISDN_DRV_PCBIT is not set
+# CONFIG_ISDN_DRV_SC is not set
+# CONFIG_ISDN_DRV_ACT2000 is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_ISDN_DRV_GIGASET=m
@@ -2090,10 +2084,10 @@
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
-CONFIG_GIGASET_UNDOCREQ=y
+# CONFIG_GIGASET_UNDOCREQ is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
+# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
@@ -2104,8 +2098,10 @@
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
+# CONFIG_ISDN_DRV_AVMB1_B1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+# CONFIG_ISDN_DRV_AVMB1_T1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
@@ -2117,20 +2113,20 @@
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m-CONFIG_PHONE=m
+# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
+CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
@@ -2143,12 +2139,11 @@
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_KEYBOARD_NEWTON=m
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
@@ -2158,12 +2153,14 @@
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_PS2_OLPC is not set
+CONFIG_MOUSE_PS2_OLPC=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_GPIO=m
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
@@ -2193,6 +2190,7 @@
CONFIG_JOYSTICK_XPAD=m+# CONFIG_JOYSTICK_WALKERA0701 is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
@@ -2200,10 +2198,7 @@
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
@@ -2212,13 +2207,11 @@
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
+# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
@@ -2243,19 +2236,18 @@
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
-# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_CT82C710=m
-CONFIG_SERIO_PARKBD=m
-CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
@@ -2272,94 +2264,100 @@
CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
+# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_COMPUTONE=m
+# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
-CONFIG_CYZ_INTR=y
-CONFIG_DIGIEPCA=m
-CONFIG_MOXA_INTELLIO=m
-CONFIG_MOXA_SMARTIO=m
-CONFIG_ISI=m
+# CONFIG_CYZ_INTR is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
-CONFIG_RISCOM8=m
-CONFIG_SPECIALIX=m
-CONFIG_SX=m
-CONFIG_RIO=m
-CONFIG_RIO_OLDPCI=y
-CONFIG_STALDRV=y
-# CONFIG_STALLION is not set
-# CONFIG_ISTALLION is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
CONFIG_NOZOMI=m
#
# Serial drivers
#
-CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_PCI=m
-CONFIG_SERIAL_8250_PNP=m
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=16
-CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
+# CONFIG_SERIAL_8250_FOURPORT is not set+# CONFIG_SERIAL_8250_BOCA is not
set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_CORE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=0
+# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
+CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
+CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
-CONFIG_IPMI_PANIC_EVENT=y
-CONFIG_IPMI_PANIC_STRING=y
+# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
-CONFIG_NVRAM=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=y
+CONFIG_DTLK=m
CONFIG_R3964=m
-CONFIG_APPLICOM=m
+# CONFIG_APPLICOM is not set
CONFIG_SONYPI=m
#
# PCMCIA character devices
# CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
-CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=4096
-# CONFIG_HPET is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_HPET=y
+# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
@@ -2400,16 +2398,15 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
-CONFIG_I2C_GPIO=m
-CONFIG_I2C_OCORES=m
-# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SIMTEC=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_TAOS_EVM=m
+# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
#
@@ -2420,75 +2417,36 @@
#
# Other I2C/SMBus bus drivers
#
+CONFIG_I2C_PCA_ISA=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_STUB=m
-CONFIG_SCx200_I2C=m
-CONFIG_SCx200_I2C_SCL=12
-CONFIG_SCx200_I2C_SDA=13
-CONFIG_SCx200_ACB=m
+# CONFIG_SCx200_ACB is not set
#
# Miscellaneous I2C Chip support
#
-CONFIG_DS1682=m
+# CONFIG_DS1682 is not set+CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_MAX6875=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=m
-CONFIG_SPI_BUTTERFLY=m
-# CONFIG_SPI_GPIO is not set
-CONFIG_SPI_LM70_LLP=m
-
-#
-# SPI Protocol Masters
-#
-CONFIG_SPI_SPIDEV=m
-CONFIG_SPI_TLE62X0=m
+# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-CONFIG_GPIO_MAX732X=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_GPIO_PCF857X=m
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-CONFIG_GPIO_MAX7301=m
-CONFIG_GPIO_MCP23S08=m
+# CONFIG_GPIOLIB is not set
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#+# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
-CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
@@ -2499,33 +2457,32 @@
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
-# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=m
-CONFIG_BATTERY_DS2760=m
-CONFIG_BATTERY_OLPC=m
-# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_OLPC=y
+CONFIG_BATTERY_BQ27x00=m
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
-CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
-# CONFIG_SENSORS_ADT7462 is not set
+CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7473=m
-# CONFIG_SENSORS_ADT7475 is not set
+CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
-# CONFIG_SENSORS_ATK0110 is not set
+CONFIG_SENSORS_ATK0110=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
@@ -2535,7 +2492,7 @@
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_FSCHMD=m
-# CONFIG_SENSORS_G760A is not set
+CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m@@ -2543,7 +2500,6 @@
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
@@ -2554,16 +2510,14 @@
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
-# CONFIG_SENSORS_LTC4215 is not set
+CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
+CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
-# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_SMSC47M1=m
@@ -2583,11 +2537,10 @@
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
-# CONFIG_SENSORS_LIS3LV02D is not set
+CONFIG_SENSORS_LIS3LV02D=m
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_THERMAL=m
-CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -2595,37 +2548,43 @@
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
-CONFIG_ACQUIRE_WDT=m
-CONFIG_ADVANTECH_WDT=m
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
-CONFIG_SC520_WDT=m
-CONFIG_EUROTECH_WDT=m
-CONFIG_IB700_WDT=m
+# CONFIG_SC520_WDT is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_IB700_WDT is not set-CONFIG_WAFER_WDT=m
+# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
-# CONFIG_IT87_WDT is not set
+CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
-CONFIG_SC1200_WDT=m
-CONFIG_SCx200_WDT=m
-CONFIG_PC87413_WDT=m
-CONFIG_60XX_WDT=m
-CONFIG_SBC8360_WDT=m
-CONFIG_SBC7240_WDT=m
-CONFIG_CPU5_WDT=m
+# CONFIG_SC1200_WDT is not set
+# CONFIG_PC87413_WDT is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_SBC7240_WDT is not set
+# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
-CONFIG_SMSC37B787_WDT=m
+# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
-# CONFIG_W83697UG_WDT is not set
+CONFIG_W83697UG_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
-CONFIG_SBC_EPX_C3_WATCHDOG=m
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
#
# PCI-based Watchdog Cards
@@ -2660,12 +2619,9 @@
#
CONFIG_MFD_CORE=m
CONFIG_MFD_SM501=m
-CONFIG_MFD_SM501_GPIO=y
-CONFIG_HTC_PASIC3=m
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+CONFIG_MFD_WM8400=m
@@ -2699,14 +2655,10 @@
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
-CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
@@ -2721,42 +2673,80 @@
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_TCM825X=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_SAA7191=m
+# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
+
+#
+# Video improvement chips
+#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
-CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
+# CONFIG_VIDEO_PMS is not set
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
@@ -2786,7 +2776,7 @@
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_MT9M001=m
-# CONFIG_SOC_CAMERA_MT9M111 is not set
+CONFIG_SOC_CAMERA_MT9M111=m
# CONFIG_SOC_CAMERA_MT9T031 is not set
CONFIG_SOC_CAMERA_MT9V022=m
# CONFIG_SOC_CAMERA_TW9910 is not set
@@ -2796,42 +2786,44 @@
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
+CONFIG_USB_M5602=m-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_OV519=m
# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-# CONFIG_VIDEO_HDPVR is not set
+CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
-# CONFIG_VIDEO_CX231XX is not set+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
@@ -2845,7 +2837,7 @@
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
-CONFIG_USB_ZC0301=m
+# CONFIG_USB_ZC0301 is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
@@ -2853,12 +2845,23 @@
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
CONFIG_USB_DSBR=m
CONFIG_USB_SI470X=m
-# CONFIG_USB_MR800 is not set
+CONFIG_USB_MR800=m
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
@@ -2878,32 +2881,7 @@
#
# Supported USB Adapters
#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-# CONFIG_DVB_USB_CXUSB is not set
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_DW2102=m
-# CONFIG_DVB_USB_CINERGY_T2 is not set
-CONFIG_DVB_USB_ANYSEE=m
-# CONFIG_DVB_USB_DTV5100 is not set
-# CONFIG_DVB_USB_AF9015 is not set
-# CONFIG_DVB_USB_CE6230 is not set
+# CONFIG_DVB_USB is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_SIANO_SMS1XXX=m
@@ -2933,11 +2911,6 @@
# CONFIG_DVB_DM1105 is not set
#
-# Supported FireWire (IEEE 1394) Adapters
-#
-# CONFIG_DVB_FIREDTV is not set
-
-#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
@@ -2948,8 +2921,6 @@
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0288=m
-CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
@@ -2961,8 +2932,6 @@
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
-CONFIG_DVB_CX24116=m
-CONFIG_DVB_SI21XX=m
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
@@ -2971,9 +2940,6 @@
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m CONFIG_DVB_S5H1411=m
CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
@@ -2998,17 +2963,17 @@
#
# Graphics support
#
-CONFIG_AGP=m
-CONFIG_AGP_ALI=m
-CONFIG_AGP_ATI=m
-CONFIG_AGP_AMD=m
-CONFIG_AGP_AMD64=m
-CONFIG_AGP_INTEL=m
-CONFIG_AGP_NVIDIA=m
-CONFIG_AGP_SIS=m
-CONFIG_AGP_SWORKS=m
-CONFIG_AGP_VIA=m
-CONFIG_AGP_EFFICEON=m
+CONFIG_AGP=y
+CONFIG_AGP_ALI=y
+CONFIG_AGP_ATI=y
+CONFIG_AGP_AMD=y
+CONFIG_AGP_AMD64=y
+CONFIG_AGP_INTEL=y
+CONFIG_AGP_NVIDIA=y
+CONFIG_AGP_SIS=y
+CONFIG_AGP_SWORKS=y
+CONFIG_AGP_VIA=y
+CONFIG_AGP_EFFICEON=y
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
@@ -3024,7 +2989,7 @@
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
@@ -3037,7 +3002,6 @@
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
@@ -3048,32 +3012,30 @@
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m-CONFIG_FB_CYBER2000=m
-CONFIG_FB_ARC=m
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
-CONFIG_FB_IMSTT=y
+# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
-CONFIG_FB_UVESA=m
+# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
-CONFIG_FB_N411=m
-CONFIG_FB_HGA=m
-CONFIG_FB_HGA_ACCEL=y
-CONFIG_FB_S1D13XXX=m
+CONFIG_FB_EFI=y
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
-CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
-CONFIG_FB_LE80578=m
-CONFIG_FB_CARILLO_RANCH=m
+# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
@@ -3081,13 +3043,15 @@
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
-# CONFIG_FB_MATROX_I2C is not set
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
-CONFIG_FB_SIS=m
-CONFIG_FB_SIS_300=y
-CONFIG_FB_SIS_315=y
-# CONFIG_FB_VIA is not set
+# CONFIG_FB_SIS is not set
+CONFIG_FB_VIA=m
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
-CONFIG_FB_VT8623=m
+# CONFIG_FB_VT8623 is not set
CONFIG_FB_TRIDENT=m
-CONFIG_FB_ARK=m
-CONFIG_FB_PM3=m
-CONFIG_FB_CARMINE=m
-CONFIG_FB_CARMINE_DRAM_EVAL=y
-# CONFIG_CARMINE_DRAM_CUSTOM is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=m
-CONFIG_FB_GEODE_GX=m
-CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_GEODE_LX=y
+CONFIG_FB_GEODE_GX=y
+# CONFIG_FB_GEODE_GX1 is not set
# CONFIG_FB_TMIO is not set
CONFIG_FB_SM501=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=y
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+# CONFIG_FB_MB862XX_PCI_GDC is not set
+CONFIG_FB_BROADSHEET=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_LTV350QV=m
-CONFIG_LCD_ILI9320=m
-# CONFIG_LCD_TDO24M is not set
-CONFIG_LCD_VGG2432A4=m
+# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=m
#
# Display device support
@@ -3154,14 +3111,18 @@
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
@@ -3177,19 +3138,22 @@
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
+CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
+CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTS64=m
@@ -3197,8 +3161,43 @@
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CS4231 is not set
+CONFIG_SND_CS4236=m
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_ES1688 is not set
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+CONFIG_SND_OPL3SA2=m
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_MIRO=m
+# CONFIG_SND_SB8 is not set
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+# CONFIG_SND_SB16_CSP is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_WAVEFRONT is not set
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
@@ -3209,7 +3208,7 @@
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
-CONFIG_SND_AW2=m
+# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
@@ -3220,7 +3219,7 @@
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
-# CONFIG_SND_CS5530 is not set
+CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
@@ -3248,7 +3247,7 @@
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
-CONFIG_SND_HDA_INPUT_BEEP=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
@@ -3287,87 +3286,63 @@
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
-CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
-# CONFIG_SND_USB_US122L is not set
-CONFIG_SND_PCMCIA=y
-CONFIG_SND_VXPOCKET=m
-CONFIG_SND_PDAUDIOCF=m
+CONFIG_SND_USB_US122L=m
+# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
-CONFIG_SOUND_PRIME=m
-CONFIG_SOUND_OSS=m
-CONFIG_SOUND_TRACEINIT=y
-CONFIG_SOUND_DMAP=y
-CONFIG_SOUND_SSCAPE=m
-CONFIG_SOUND_VMIDI=m
-CONFIG_SOUND_TRIX=m
-CONFIG_SOUND_MSS=m
-CONFIG_SOUND_MPU401=m
-CONFIG_SOUND_PAS=m
-CONFIG_SOUND_PSS=m
-CONFIG_PSS_MIXER=y
-# CONFIG_PSS_HAVE_BOOT is not set
-CONFIG_SOUND_SB=m
-CONFIG_SOUND_YM3812=m
-CONFIG_SOUND_UART6850=m
-CONFIG_SOUND_AEDSP16=m
-CONFIG_SC6600=y
-CONFIG_SC6600_JOY=y
-CONFIG_SC6600_CDROM=4
-CONFIG_SC6600_CDROMBASE=0x0-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
-CONFIG_USB_HID=m
+CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=m
-CONFIG_HID_KYE=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_KENSINGTON=m
-CONFIG_HID_LOGITECH=m
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_DRAGONRISE_FF=m
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_NTRIG=m
-CONFIG_HID_PANTHERLORD=m
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
# CONFIG_GREENASIA_FF is not set
-CONFIG_HID_TOPSEED=m
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+CONFIG_HID_TOPSEED=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=m
+CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
@@ -3379,43 +3354,38 @@
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
-CONFIG_USB_MON=m
+CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
-CONFIG_USB_C67X00_HCD=m
-CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
-CONFIG_USB_ISP116X_HCD=m
-CONFIG_USB_ISP1760_HCD=m
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_HCD_SSB is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_U132_HCD is not set
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_SL811_CS is not set
#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
-# CONFIG_USB_TMC is not set
+CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
@@ -3458,7 +3428,7 @@
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP210X is not set
+CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -3468,23 +3438,11 @@
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
+# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
@@ -3501,7 +3459,7 @@
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_SYMBOL=m CONFIG_USB_SERIAL_XIRCOM=m
@@ -3516,14 +3474,14 @@
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
-# CONFIG_USB_SEVSEG is not set
-CONFIG_USB_RIO500=m
+CONFIG_USB_SEVSEG=m
+# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
@@ -3534,7 +3492,7 @@
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
-# CONFIG_USB_VST is not set
+CONFIG_USB_VST=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
@@ -3544,8 +3502,8 @@
#
# OTG and related infrastructure
#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_OTG_UTILS=y
+CONFIG_NOP_USB_XCEIV=m
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
@@ -3557,7 +3515,7 @@
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
-CONFIG_MMC_TEST=m
+# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
@@ -3583,38 +3541,32 @@
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CLASS=y
#
-CONFIG_LEDS_NET48XX=m
-CONFIG_LEDS_WRAP=m
# CONFIG_LEDS_ALIX2 is not set
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_LP5521=m
CONFIG_LEDS_CLEVO_MAIL=m
-CONFIG_LEDS_PCA955X=m
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_BD2802=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_EDAC=y
#
@@ -3628,16 +3580,18 @@
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
-# CONFIG_EDAC_X38 is not set
+CONFIG_EDAC_X38=m
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
+CONFIG_EDAC_AMD8131=m
+CONFIG_EDAC_AMD8111=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
@@ -3645,8 +3599,8 @@
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_TEST=m
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
@@ -3662,34 +3616,27 @@
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
-CONFIG_RTC_DRV_S35390A=m
+# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
-# CONFIG_RTC_DRV_RX8581 is not set
+CONFIG_RTC_DRV_RX8581=m
#
# SPI RTC drivers
#
-CONFIG_RTC_DRV_M41T94=m
-CONFIG_RTC_DRV_DS1305=m
-# CONFIG_RTC_DRV_DS1390 is not set
-CONFIG_RTC_DRV_MAX6902=m
-CONFIG_RTC_DRV_R9701=m
-CONFIG_RTC_DRV_RS5C348=m
-# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
-CONFIG_RTC_DRV_CMOS=m
-# CONFIG_RTC_DRV_DS1286 is not set
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
-CONFIG_RTC_DRV_M48T86=m
-# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
-# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_V3020=m
# CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_SMX=m
-# CONFIG_UIO_AEC is not set
-# CONFIG_UIO_SERCOS3 is not set
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
@@ -3719,12 +3666,11 @@
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
-CONFIG_STAGING=y
-CONFIG_STAGING_EXCLUDE_BUILD=y
+# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ASUS_LAPTOP=m
-# CONFIG_DELL_WMI is not set
+CONFIG_DELL_WMI=m
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_TC1100_WMI=m
@@ -3741,8 +3687,8 @@
CONFIG_THINKPAD_ACPI_BAY=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
-CONFIG_INTEL_MENLOW=m
-CONFIG_EEEPC_LAPTOP=m
+# CONFIG_INTEL_MENLOW is not set
+# CONFIG_EEEPC_LAPTOP is not set
CONFIG_ACPI_WMI=m
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_TOSHIBA=m
@@ -3753,6 +3699,7 @@
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
@@ -3766,21 +3713,26 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y-CONFIG_JBD_DEBUG=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
-CONFIG_FS_MBCACHE=m
+CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
@@ -3788,20 +3740,20 @@
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
-CONFIG_JFS_STATISTICS=y
+# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
+# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
# CONFIG_GFS2_FS_LOCKING_DLM is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
-CONFIG_OCFS2_FS_STATS=y
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_OCFS2_FS_POSIX_ACL is not set
@@ -3811,12 +3763,12 @@
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=m
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=y+# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
@@ -3842,27 +3794,25 @@
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
+# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
@@ -3875,33 +3825,25 @@
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=y
+CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
-CONFIG_HPFS_FS=m
+# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
@@ -3910,8 +3852,9 @@
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
+# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_EXOFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
@@ -3934,8 +3877,7 @@
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
@@ -3953,8 +3895,7 @@
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FS is not set
#
# Partition Types
@@ -3962,25 +3903,24 @@
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
+# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
-CONFIG_ULTRIX_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_SYSV68_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
@@ -4003,7 +3943,7 @@
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
+CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
@@ -4019,7 +3959,7 @@
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
+CONFIG_DLM_DEBUG=y
#
# Kernel hacking
@@ -4027,23 +3967,28 @@
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ALLOW_WARNINGS=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set+CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -4051,35 +3996,34 @@
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
+CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-CONFIG_RCU_TORTURE_TEST=m
+CONFIG_BOOT_PRINTK_DELAY=y
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-CONFIG_LKDTM=m
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set-CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -4087,30 +4031,32 @@
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+CONFIG_BUILD_DOCSRC=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
+CONFIG_KGDB=y
+CONFIG_KGDB_SERIAL_CONSOLE=y
+CONFIG_KGDB_TESTS=y
+# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
-# CONFIG_STRICT_DEVMEM is not set
-CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_STRICT_DEVMEM=y
+# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_4KSTACKS is not set
+CONFIG_4KSTACKS=y
CONFIG_DOUBLEFAULT=y
CONFIG_X86_DS_SELFTEST=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
@@ -4123,9 +4069,9 @@
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DEBUG_BOOT_PARAMS is not set
+CONFIG_DEBUG_BOOT_PARAMS=y+CONFIG_OPTIMIZE_INLINING=y
#
# Security options
@@ -4135,18 +4081,20 @@
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
+CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_XOR_BLOCKS=m
@@ -4158,7 +4106,7 @@
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
@@ -4175,7 +4123,7 @@
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
@@ -4207,15 +4155,15 @@
# Digest
#
CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CRC32C_INTEL is not set
+CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
@@ -4240,7 +4188,7 @@
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_TWOFISH is not set
+CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
@@ -4248,27 +4196,30 @@
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_DEV_PADLOCK=m
-CONFIG_CRYPTO_DEV_PADLOCK_AES=m
-CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_GEODE=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
-# CONFIG_KVM is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTIO_BALLOON is not set
-CONFIG_BINARY_PRINTF=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_TRACE=y
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -4279,10 +4230,10 @@
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
-CONFIG_CRC7=m
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
</CODE>
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore
529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Wed, 22 Jul 2009 20:32:33 +0300
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Thu, Jul 23, 2009 at 01:17:23AM +0800, Teo En
Ming (Zhang Enming) wrote:
> Dear Pasik,
>
> This morning when I go to office i will examine the differences between
> your .config and my .config using diff and create a patch. I will then
> look through the generated patch file and patch my .config accordingly.
>
Yep.
Just remember my .config is a mess; it's originally based on some Fedora 10
default kernel, and then changed many times after that..
But it works for me :)
I've been compiling and running on Fedora 10 and Fedora 11, using Xen 3.3.1
and Xen 3.4.0.
-- Pasi
> Regards,
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
> Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> Teo En Ming (Zhang Enming) wrote:
> >Hi Pasik
> >
> >I suspect that the Z0_startup_32 error has something to do with
> >compiling 32-bit xen kernels. The problem may not appear when
> >compiling 64-bit xen kernels.
> >
> >Pasi Kärkkäinen wrote:
> >>On Wed, Jul 22, 2009 at 07:04:48PM +0300, Pasi Kärkkäinen wrote:
> >>
> >>>On Wed, Jul 22, 2009 at 11:47:11PM +0800, Teo En Ming wrote:
> >>>
> >>>>OOOPS! I still got an error compiling the kernel image.
Please advise.
> >>>>See console output below.
> >>>>
> >>>>
>
>>>http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.30-rc6-tip-next-no-highpte
[http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.30-rc6-tip-next-no-highpte]
> >>>
> >>>That's some random .config from me.. it should work. It works
for me.
> >>>
> >>>
> >>
> >>I was using that .config with xen-tip/next pv_ops dom0 kernel.
> >>
> >>-- Pasi
> >>
> >>_______________________________________________
> >>Xen-devel mailing list
> >>Xen-devel@lists.xensource.com
> >>http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> >>
> >
>
>------------------------------------------------------------------------
> >
> >
> >No virus found in this outgoing message.
> >Checked by AVG - www.avg.com [http://www.avg.com/]
> >Version: 8.5.392 / Virus Database: 270.13.20/2251 - Release Date:
07/20/09
> >18:29:00
> >
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >Xen-devel mailing list
> >Xen-devel@lists.xensource.com
> >http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> >
>
>
> No virus found in this outgoing message.
> Checked by AVG - www.avg.com [http://www.avg.com/]
> Version: 8.5.392 / Virus Database: 270.13.20/2251 - Release Date: 07/20/09
18:29:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 215480 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-23 3:27 ` Teo En Ming
2009-07-23 3:20 ` Teo En Ming
@ 2009-07-23 9:19 ` Teo En Ming
2009-07-23 9:12 ` Teo En Ming
1 sibling, 1 reply; 86+ messages in thread
From: Teo En Ming @ 2009-07-23 9:19 UTC (permalink / raw)
To: 'Teo En Ming', 'Pasi Kärkkäinen'
Cc: xen-devel, jeremy.fitzhardinge
[-- Attachment #1.1: Type: text/plain, Size: 105094 bytes --]
kernel modules build success!
<CODE>
IHEX2FW firmware/whiteheat_loader.fw
IHEX2FW firmware/whiteheat.fw
IHEX2FW firmware/keyspan_pda/keyspan_pda.fw
IHEX2FW firmware/keyspan_pda/xircom_pgs.fw
H16TOFW firmware/vicam/firmware.fw
IHEX firmware/cpia2/stv0672_vp4.bin
IHEX firmware/yam/1200.bin
IHEX firmware/yam/9600.bin
</CODE>
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "'Teo En Ming'" <enming.teo@asiasoftsea.net>, 'Pasi Kärkkäinen'
<pasik@iki.fi>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Thu, 23 Jul 2009 11:27:38 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Dear Pasik,
Success in compiling the Xen Dom 0 paravirt ops enabled kernel!
<CODE>
LD Documentation/video4linux/built-in.o
HOSTCC Documentation/video4linux/v4lgrab
LD Documentation/vm/built-in.o
HOSTCC Documentation/vm/slabinfo
LD Documentation/watchdog/src/built-in.o
HOSTCC Documentation/watchdog/src/watchdog-simple
HOSTCC Documentation/watchdog/src/watchdog-test
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
CC arch/x86/boot/a20.o
AS arch/x86/boot/bioscall.o
CC arch/x86/boot/cmdline.o
AS arch/x86/boot/copy.o
HOSTCC arch/x86/boot/mkcpustr
CPUSTR arch/x86/boot/cpustr.h
CC arch/x86/boot/cpu.o
CC arch/x86/boot/cpucheck.o
CC arch/x86/boot/edd.o
VOFFSET arch/x86/boot/voffset.h
LDS arch/x86/boot/compressed/vmlinux.lds
AS arch/x86/boot/compressed/head_32.o
CC arch/x86/boot/compressed/misc.o
OBJCOPY arch/x86/boot/compressed/vmlinux.bin
HOSTCC arch/x86/boot/compressed/relocs
RELOCS arch/x86/boot/compressed/vmlinux.relocs
GZIP arch/x86/boot/compressed/vmlinux.bin.gz
HOSTCC arch/x86/boot/compressed/mkpiggy
MKPIGGY arch/x86/boot/compressed/piggy.S
AS arch/x86/boot/compressed/piggy.o
LD arch/x86/boot/compressed/vmlinux
ZOFFSET arch/x86/boot/zoffset.h
AS arch/x86/boot/header.o
CC arch/x86/boot/main.o
CC arch/x86/boot/mca.o
CC arch/x86/boot/memory.o
CC arch/x86/boot/pm.o
AS arch/x86/boot/pmjump.o
CC arch/x86/boot/printf.o
CC arch/x86/boot/regs.o
CC arch/x86/boot/string.o
CC arch/x86/boot/tty.o
CC arch/x86/boot/video.o
CC arch/x86/boot/video-mode.o
CC arch/x86/boot/version.o
CC arch/x86/boot/apm.o
CC arch/x86/boot/video-vga.o
CC arch/x86/boot/video-vesa.o
CC arch/x86/boot/video-bios.o
LD arch/x86/boot/setup.elf
OBJCOPY arch/x86/boot/setup.bin
OBJCOPY arch/x86/boot/vmlinux.bin
HOSTCC arch/x86/boot/tools/build
BUILD arch/x86/boot/bzImage
Root device is (8, 2)
Setup is 13932 bytes (padded to 14336 bytes).
System is 2784 kB
CRC 17b52ba1
Kernel: arch/x86/boot/bzImage is ready (#4)
</CODE>
Thank you!!!
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Thu, 23 Jul 2009 10:21:39 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Dear Pasik,
I just did a diff this morning. Here are the differences between my kernel
configuration and your kernel configuration.
<CODE>
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
-CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEM_RES_CTLR=y
-# CONFIG_CGROUP_MEM_RES_CTLR_SWAP is not set
-CONFIG_MM_OWNER=y
+# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
@@ -135,7 +131,7 @@
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -158,15 +154,15 @@
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
-CONFIG_OPROFILE=m
-# CONFIG_OPROFILE_IBS is not set
+# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -182,10 +178,10 @@
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
@@ -205,24 +201,24 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
-# CONFIG_SPARSE_IRQ is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_RDC321X is not set
-CONFIG_X86_32_NON_STANDARD=y
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
+# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
@@ -235,25 +231,24 @@
CONFIG_XEN_PRIVILEGED_GUEST=y
# CONFIG_XEN_PCI_PASSTHROUGH_DEBUG is not set
CONFIG_MICROCODE_XEN=y
-# CONFIG_VMI is not set
+CONFIG_VMI=y
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
-# CONFIG_PARAVIRT_SPINLOCKS is not set
+CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_MEMTEST is not set
-CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
-CONFIG_M686=y
+# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
-# CONFIG_MPENTIUM4 is not set
+CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
@@ -274,9 +269,8 @@
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=5
+CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
-CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
@@ -296,21 +290,24 @@
CONFIG_CPU_SUP_UMC_32=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
-# CONFIG_HPET_TIMER is not set
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=8
-# CONFIG_SCHED_SMT is not set
+CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
-# CONFIG_X86_MCE is not set
+CONFIG_X86_MCE=y
+# CONFIG_X86_MCE_NONFATAL is not set
+CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
@@ -350,7 +347,7 @@
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_MMU_NOTIFIER=y
-# CONFIG_HIGHPTE is not set
+CONFIG_HIGHPTE=n
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
@@ -359,23 +356,23 @@
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
-# CONFIG_EFI is not set
+CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
+# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x1000000
+CONFIG_CRASH_DUMP=y
+CONFIG_PHYSICAL_START=0x400000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
-CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_PHYSICAL_ALIGN=0x400000
CONFIG_HOTPLUG_CPU=y
-CONFIG_COMPAT_VDSO=y
+# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -383,10 +380,15 @@
# Power management and ACPI options
#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_TRACE=y
+CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
@@ -395,32 +397,75 @@
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
-CONFIG_ACPI_AC=m
-CONFIG_ACPI_BATTERY=m
-CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
-CONFIG_ACPI_FAN=m
+CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_THERMAL=m
-CONFIG_ACPI_CUSTOM_DSDT_FILE=""
+CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=2001
-CONFIG_ACPI_DEBUG=y
-# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
+CONFIG_ACPI_BLACKLIST_YEAR=1999
+# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
-CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=m
-# CONFIG_APM is not set
+CONFIG_X86_APM_BOOT=y
+CONFIG_APM=y
+# CONFIG_APM_IGNORE_USER_SUSPEND is not set
+# CONFIG_APM_DO_ENABLE is not set
+CONFIG_APM_CPU_IDLE=y
+# CONFIG_APM_DISPLAY_BLANK is not set
+# CONFIG_APM_ALLOW_INTS is not set
#
# CPU Frequency scaling
#
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m+
+#
+# CPUFreq processor drivers
+#
+CONFIG_X86_ACPI_CPUFREQ=m
+# CONFIG_X86_POWERNOW_K6 is not set
+CONFIG_X86_POWERNOW_K7=y
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+# CONFIG_X86_GX_SUSPMOD is not set
+# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
+CONFIG_X86_SPEEDSTEP_ICH=y
+CONFIG_X86_SPEEDSTEP_SMI=y
+CONFIG_X86_P4_CLOCKMOD=m
+# CONFIG_X86_CPUFREQ_NFORCE2 is not set
+CONFIG_X86_LONGRUN=y
+# CONFIG_X86_LONGHAUL is not set
+CONFIG_X86_E_POWERSAVER=y
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=y
+# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
@@ -451,15 +496,15 @@
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
-# CONFIG_ISA is not set
+CONFIG_ISA=y
+# CONFIG_EISA is not set
# CONFIG_MCA is not set
-CONFIG_SCx200=m
-CONFIG_SCx200HR_TIMER=m
+# CONFIG_SCx200 is not set
CONFIG_OLPC=y
CONFIG_K8_NB=y
-CONFIG_PCCARD=m
+CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
@@ -475,17 +520,19 @@
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
+CONFIG_I82365=m
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_IBM is not set
-CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
-CONFIG_HOTPLUG_PCI_CPCI=y
-CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
-CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
-CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
@@ -493,22 +540,22 @@
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
-CONFIG_PACKET=m
+CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
@@ -561,12 +608,12 @@
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
+CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
@@ -582,8 +629,9 @@
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -596,7 +644,7 @@
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
@@ -615,8 +663,8 @@
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
@@ -628,6 +676,7 @@
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
@@ -637,7 +686,7 @@
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_DCCP=m@@ -657,9 +706,11 @@
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
@@ -701,17 +752,17 @@
#
# IP: Netfilter Configuration
#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
@@ -766,7 +817,7 @@
#
# DECnet: Netfilter Configuration
#
-CONFIG_DECNET_NF_GRABULATOR=m
+# CONFIG_DECNET_NF_GRABULATOR is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -805,19 +856,21 @@
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
-# CONFIG_NET_DCCPPROBE is not set
+CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set-# CONFIG_TIPC is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
-CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
+# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_STP=m
@@ -829,21 +882,21 @@
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
-CONFIG_LLC2=m
+# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
+# CONFIG_LTPC is not set
+# CONFIG_COPS is not set
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
-CONFIG_X25=m
-CONFIG_LAPB=m
-CONFIG_ECONET=m
-# CONFIG_ECONET_AUNUDP is not set
-# CONFIG_ECONET_NATIVE is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
+CONFIG_PHONET=m
CONFIG_NET_SCHED=y
#
@@ -881,7 +934,13 @@
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_CLS_CGROUP is not set
-# CONFIG_NET_EMATCH is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m@@ -892,7 +951,7 @@
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
-# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
@@ -900,7 +959,7 @@
# Network testing
#
CONFIG_NET_PKTGEN=m
-CONFIG_NET_TCPPROBE=m
+# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
@@ -918,6 +977,9 @@
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
+CONFIG_SCC=m
+# CONFIG_SCC_DELAY is not set
+CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
@@ -940,13 +1002,13 @@
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
+# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
+CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
@@ -1017,14 +1079,12 @@
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
-CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-CONFIG_RXKAD=m
+# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not set+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
@@ -1057,14 +1117,14 @@
#
# Generic Driver Options
#
-CONFIG_UEVENT_HELPER_PATH=""
-# CONFIG_STANDALONE is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_DEBUG_DEVRES=y
CONFIG_SYS_HYPERVISOR=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
@@ -1083,15 +1143,15 @@
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
-CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
CONFIG_RFD_FTL=m
-# CONFIG_SSFDC is not set
+CONFIG_SSFDC=m
CONFIG_MTD_OOPS=m
#
@@ -1100,11 +1160,7 @@
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y@@ -1115,49 +1171,43 @@
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
-CONFIG_MTD_SBC_GXX=m
-CONFIG_MTD_SCx200_DOCFLASH=m
-CONFIG_MTD_AMD76XROM=m
-CONFIG_MTD_ICHXROM=m
+# CONFIG_MTD_SBC_GXX is not set
+# CONFIG_MTD_AMD76XROM is not set
+# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
-CONFIG_MTD_NETtel=m
-CONFIG_MTD_DILNETPC=m
-CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
-CONFIG_MTD_L440GX=m
+# CONFIG_MTD_NETtel is not set
+# CONFIG_MTD_DILNETPC is not set
+# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
-CONFIG_MTD_INTEL_VR_NOR=m
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
-CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
@@ -1166,15 +1216,9 @@
#
# Disk-On-Chip Device Drivers
#
-CONFIG_MTD_DOC2000=m
-CONFIG_MTD_DOC2001=m
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-CONFIG_MTD_DOCPROBE_ADVANCED=y
-CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
-CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_DOCPROBE_55AA=y
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
@@ -1183,17 +1227,13 @@
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
-# CONFIG_MTD_NAND_CS553X is not set
+CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
+# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ALAUDA=m
-CONFIG_MTD_ONENAND=m
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-CONFIG_MTD_ONENAND_OTP=y
-CONFIG_MTD_ONENAND_2X_PROGRAM=y
-CONFIG_MTD_ONENAND_SIM=m
+# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
@@ -1215,11 +1255,11 @@
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_PC_SUPERIO=y
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
@@ -1228,9 +1268,12 @@
#
# Protocols
#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
+# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE=m
#
@@ -1267,116 +1310,50 @@
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=64000
-CONFIG_BLK_DEV_XIP=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
-CONFIG_CDROM_PKTCDVD_WCACHE=y
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=y
+CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
-CONFIG_PHANTOM=m
+# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
-# CONFIG_ICS932S401 is not set
+CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HP_ILO=m
# CONFIG_DELL_LAPTOP is not set
# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
+CONFIG_C2PORT=m
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_93CX6=m
CONFIG_HAVE_IDE=y
-CONFIG_IDE=m
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=m
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-CONFIG_BLK_DEV_IDECS=m
-CONFIG_BLK_DEV_DELKIN=m
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEACPI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-CONFIG_BLK_DEV_PLATFORM=m
-CONFIG_BLK_DEV_CMD640=m
-CONFIG_BLK_DEV_CMD640_ENHANCED=y
-CONFIG_BLK_DEV_IDEPNP=m
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_BLK_DEV_OFFBOARD=y
-CONFIG_BLK_DEV_GENERIC=m
-CONFIG_BLK_DEV_OPTI621=m
-CONFIG_BLK_DEV_RZ1000=m
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-CONFIG_BLK_DEV_AEC62XX=m
-CONFIG_BLK_DEV_ALI15X3=m
-CONFIG_BLK_DEV_AMD74XX=m
-CONFIG_BLK_DEV_ATIIXP=m
-CONFIG_BLK_DEV_CMD64X=m
-CONFIG_BLK_DEV_TRIFLEX=m
-CONFIG_BLK_DEV_CS5520=m-# CONFIG_BLK_DEV_CS5536 is not set
-CONFIG_BLK_DEV_HPT366=m
-CONFIG_BLK_DEV_JMICRON=m
-CONFIG_BLK_DEV_SC1200=m
-CONFIG_BLK_DEV_PIIX=m
-# CONFIG_BLK_DEV_IT8172 is not set
-CONFIG_BLK_DEV_IT8213=m
-CONFIG_BLK_DEV_IT821X=m
-CONFIG_BLK_DEV_NS87415=m
-CONFIG_BLK_DEV_PDC202XX_OLD=m
-CONFIG_BLK_DEV_PDC202XX_NEW=m
-CONFIG_BLK_DEV_SVWKS=m
-CONFIG_BLK_DEV_SIIMAGE=m
-CONFIG_BLK_DEV_SIS5513=m
-CONFIG_BLK_DEV_SLC90E66=m
-CONFIG_BLK_DEV_TRM290=m
-CONFIG_BLK_DEV_VIA82CXXX=m
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
+CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
@@ -1385,12 +1362,12 @@
#
# SCSI support type (disk, tape, CD-ROM)
#
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
@@ -1400,7 +1377,7 @@
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
-CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-CONFIG_SCSI_CXGB3_ISCSI=m
+# CONFIG_SCSI_CXGB3_ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
+# CONFIG_SCSI_7000FASST is not set
CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AHA152X=m
+# CONFIG_SCSI_AHA1542 is not set
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
-CONFIG_AIC7XXX_RESET_DELAY_MS=5000
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=32
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
-CONFIG_AIC79XX_REG_PRETTY_PRINT=y
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
-CONFIG_AIC94XX_DEBUG=y
-CONFIG_SCSI_DPT_I2O=m
+# CONFIG_AIC94XX_DEBUG is not set
+# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=m
+# CONFIG_SCSI_IN2000 is not set
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
@@ -1448,20 +1429,22 @@
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
-# CONFIG_SCSI_MPT2SAS is not set
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m-CONFIG_FCOE=m
-CONFIG_SCSI_DMX3191D=m
-CONFIG_SCSI_EATA=m
-CONFIG_SCSI_EATA_TAGGED_QUEUE=y
-CONFIG_SCSI_EATA_LINKED_COMMANDS=y
-CONFIG_SCSI_EATA_MAX_TAGS=16
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
@@ -1470,23 +1453,28 @@
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_IPR=m
-CONFIG_SCSI_IPR_TRACE=y
-CONFIG_SCSI_IPR_DUMP=y
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+# CONFIG_SCSI_SYM53C416 is not set
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
-CONFIG_SCSI_NSP32=m
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_SRP=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
@@ -1494,21 +1482,24 @@
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
-CONFIG_SCSI_DH=m CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
-# CONFIG_SCSI_OSD_INITIATOR is not set
-CONFIG_ATA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=m
+CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
-CONFIG_ATA_PIIX=m
+CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
@@ -1539,10 +1530,12 @@
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
-# CONFIG_PATA_HPT3X3_DMA is not set
+CONFIG_PATA_HPT3X3_DMA=y
+# CONFIG_PATA_ISAPNP is not set
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
+# CONFIG_PATA_LEGACY is not set
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
@@ -1555,15 +1548,17 @@
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
-CONFIG_PATA_RADISYS=m
-CONFIG_PATA_RZ1000=m
-CONFIG_PATA_SC1200=m
+CONFIG_PATA_QDI=m
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
+# CONFIG_PATA_WINBOND_VLB is not set
CONFIG_PATA_SCH=m
CONFIG_MD=y CONFIG_MD_RAID6_PQ=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_DELAY=m
+# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
-CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
-# CONFIG_FUSION_LOGGING is not set
+CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
@@ -1601,20 +1596,13 @@
#
# Enable only one of the two stacks, unless you know what you are doing
#
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=m
-CONFIG_IEEE1394_OHCI1394=m
-CONFIG_IEEE1394_PCILYNX=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_DV1394=m
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_SBP2=m
+# CONFIG_IEEE1394 is not set
CONFIG_I2O=m
-CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
@@ -1623,7 +1611,8 @@
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
-# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_IFB=m
@@ -1634,15 +1623,7 @@
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_NET_SB1000=m
-CONFIG_ARCNET=m
-CONFIG_ARCNET_1201=m
-CONFIG_ARCNET_1051=m
-CONFIG_ARCNET_RAW=m
-CONFIG_ARCNET_CAP=m
-CONFIG_ARCNET_COM90xx=m
-CONFIG_ARCNET_COM90xxIO=m
-CONFIG_ARCNET_RIM_I=m
-# CONFIG_ARCNET_COM20020 is not set
+# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
@@ -1662,32 +1643,52 @@
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MDIO_BITBANG=m
-# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
+# CONFIG_EL1 is not set
+# CONFIG_EL2 is not set
+# CONFIG_ELPLUS is not set
+# CONFIG_EL16 is not set
+CONFIG_EL3=m
+# CONFIG_3C515 is not set
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
-CONFIG_ENC28J60=m
-# CONFIG_ENC28J60_WRITEVERIFY is not set
-# CONFIG_ETHOC is not set
+# CONFIG_LANCE is not set
+CONFIG_NET_VENDOR_SMC=y
+CONFIG_ULTRA=m
+# CONFIG_SMC9194 is not set
+CONFIG_ETHOC=m
+# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-CONFIG_TULIP_NAPI=y
-CONFIG_TULIP_NAPI_HW_MITIGATION=y
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
-CONFIG_HP100=m
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+CONFIG_EWRK3=m
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=m
+# CONFIG_ZNET is not set
+# CONFIG_SEEQ8005 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -1699,12 +1700,15 @@
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
+# CONFIG_CS89x0 is not set
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
@@ -1723,7 +1727,7 @@
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
-# CONFIG_VIA_RHINE_MMIO is not set
+CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
@@ -1738,7 +1742,7 @@
CONFIG_E1000E=m
CONFIG_IP1000=m CONFIG_IGB=m
-# CONFIG_IGBVF is not set
+CONFIG_IGBVF=m
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
@@ -1756,55 +1760,52 @@
CONFIG_ATL1=m
CONFIG_ATL1E=m
# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
+CONFIG_JME=m
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=m
-# CONFIG_ENIC is not set
+CONFIG_ENIC=m
CONFIG_IXGBE=m
CONFIG_IXGB=m
CONFIG_S2IO=m
CONFIG_MYRI10GE=m
CONFIG_NIU=m
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
-# CONFIG_QLGE is not set
-CONFIG_SFC=m
-CONFIG_SFC_MTD=y
-# CONFIG_BE2NET is not set
+CONFIG_QLGE=m
+# CONFIG_SFC is not set
+CONFIG_BE2NET=m
CONFIG_TR=y
+# CONFIG_IBMTR is not set
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
-CONFIG_TMS380TR=m
-CONFIG_TMSPCI=m
-CONFIG_ABYSS=m
+# CONFIG_TMS380TR is not set
+# CONFIG_SMCTR is not set
#
# Wireless LAN
#
-CONFIG_WLAN_PRE80211=y
-CONFIG_STRIP=m
-CONFIG_PCMCIA_WAVELAN=m
-CONFIG_PCMCIA_NETWAVE=m-CONFIG_PCMCIA_RAYCS=m
+# CONFIG_PCMCIA_RAYCS is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_LIBERTAS_DEBUG=y
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
-# CONFIG_AT76C50X_USB is not set
+CONFIG_AT76C50X_USB=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
@@ -1814,17 +1815,17 @@
CONFIG_RTL8187=m
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
-# CONFIG_MWL8K is not set
+CONFIG_MWL8K=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
-# CONFIG_P54_SPI is not set
CONFIG_P54_LEDS=y
CONFIG_ATH5K=m
-# CONFIG_ATH5K_DEBUG is not set
+CONFIG_ATH5K_DEBUG=y
CONFIG_ATH9K=m
# CONFIG_ATH9K_DEBUG is not set
-# CONFIG_AR9170_USB is not set
+CONFIG_AR9170_USB=m
+CONFIG_AR9170_LEDS=y
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
@@ -1840,7 +1841,8 @@
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLWIFI_RFKILL=y
# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT is not set
-# CONFIG_IWLWIFI_DEBUG is not set
+CONFIG_IWLWIFI_DEBUG=y
+CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWLAGN=m
CONFIG_IWL4965=y
CONFIG_IWL5000=y
@@ -1859,13 +1861,14 @@
CONFIG_B43_PIO=y
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
-# CONFIG_B43_DEBUG is not set+CONFIG_B43_DEBUG=y
+# CONFIG_B43_FORCE_PIO is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_RFKILL=y
-# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
@@ -1896,9 +1899,9 @@
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_DM9601=m
-# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
@@ -1923,63 +1926,40 @@
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_PCMCIA_IBMTR=m
-CONFIG_WAN=y
-CONFIG_LANMEDIA=m
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-CONFIG_HDLC_X25=m
-CONFIG_PCI200SYN=m
-CONFIG_WANXL=m
-CONFIG_PC300TOO=m
-CONFIG_FARSYNC=m
-# CONFIG_DSCC4 is not set
-CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
-# CONFIG_WAN_ROUTER_DRIVERS is not set
-CONFIG_LAPBETHER=m
-CONFIG_X25_ASY=m
-# CONFIG_SBNI is not set
+# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
-CONFIG_ATM_DUMMY=m
+# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m-CONFIG_ATM_ZATM=m
-# CONFIG_ATM_ZATM_DEBUG is not set
+# CONFIG_ATM_ZATM is not set
CONFIG_ATM_NICSTAR=m
-CONFIG_ATM_NICSTAR_USE_SUNI=y
-CONFIG_ATM_NICSTAR_USE_IDT77105=y
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
-CONFIG_ATM_IDT77252_RCV_ALL=y
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
-CONFIG_ATM_IA=m
-# CONFIG_ATM_IA_DEBUG is not set
+# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=m
-CONFIG_ATM_FORE200E_USE_TASKLET=y
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
-CONFIG_ATM_HE_USE_SUNI=y
+# CONFIG_ATM_HE_USE_SUNI is not set
# CONFIG_ATM_SOLOS is not set
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
-CONFIG_HIPPI=y
-CONFIG_ROADRUNNER=m
-CONFIG_ROADRUNNER_LARGE_RINGS=y
+# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
@@ -1987,7 +1967,7 @@
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
@@ -1996,23 +1976,23 @@
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_VIRTIO_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
+# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
-CONFIG_ISDN_X25=y
#
# ISDN feature submodules
@@ -2033,9 +2013,9 @@
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
-# CONFIG_HISAX_NO_SENDCOMPLETE is not set
-# CONFIG_HISAX_NO_LLC is not set
-# CONFIG_HISAX_NO_KEYPAD is not set
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
@@ -2043,17 +2023,27 @@
#
# HiSax supported cards
#
+# CONFIG_HISAX_16_0 is not set
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
+# CONFIG_HISAX_AVM_A1 is not set
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
+# CONFIG_HISAX_IX1MICROR2 is not set
CONFIG_HISAX_DIEHLDIVA=y
+# CONFIG_HISAX_ASUSCOM is not set
+# CONFIG_HISAX_TELEINT is not set
+# CONFIG_HISAX_HFCS is not set
CONFIG_HISAX_SEDLBAUER=y
+# CONFIG_HISAX_SPORTSTER is not set
+# CONFIG_HISAX_MIC is not set
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
+# CONFIG_HISAX_ISURF is not set
+# CONFIG_HISAX_HSTSAPHIR is not set
CONFIG_HISAX_BKM_A4T=y CONFIG_HISAX_GAZEL=y
@@ -2061,7 +2051,7 @@
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
-CONFIG_HISAX_DEBUG=y
+# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
@@ -2075,7 +2065,7 @@
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
+# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
@@ -2083,6 +2073,10 @@
#
# Active cards
#
+# CONFIG_ISDN_DRV_ICN is not set
+# CONFIG_ISDN_DRV_PCBIT is not set
+# CONFIG_ISDN_DRV_SC is not set
+# CONFIG_ISDN_DRV_ACT2000 is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_ISDN_DRV_GIGASET=m
@@ -2090,10 +2084,10 @@
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
-CONFIG_GIGASET_UNDOCREQ=y
+# CONFIG_GIGASET_UNDOCREQ is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
+# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
@@ -2104,8 +2098,10 @@
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
+# CONFIG_ISDN_DRV_AVMB1_B1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+# CONFIG_ISDN_DRV_AVMB1_T1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
@@ -2117,20 +2113,20 @@
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m-CONFIG_PHONE=m
+# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
+CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
@@ -2143,12 +2139,11 @@
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_KEYBOARD_NEWTON=m
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
@@ -2158,12 +2153,14 @@
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_PS2_OLPC is not set
+CONFIG_MOUSE_PS2_OLPC=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_GPIO=m
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
@@ -2193,6 +2190,7 @@
CONFIG_JOYSTICK_XPAD=m+# CONFIG_JOYSTICK_WALKERA0701 is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
@@ -2200,10 +2198,7 @@
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
@@ -2212,13 +2207,11 @@
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
+# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
@@ -2243,19 +2236,18 @@
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
-# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_CT82C710=m
-CONFIG_SERIO_PARKBD=m
-CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
@@ -2272,94 +2264,100 @@
CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
+# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_COMPUTONE=m
+# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
-CONFIG_CYZ_INTR=y
-CONFIG_DIGIEPCA=m
-CONFIG_MOXA_INTELLIO=m
-CONFIG_MOXA_SMARTIO=m
-CONFIG_ISI=m
+# CONFIG_CYZ_INTR is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
-CONFIG_RISCOM8=m
-CONFIG_SPECIALIX=m
-CONFIG_SX=m
-CONFIG_RIO=m
-CONFIG_RIO_OLDPCI=y
-CONFIG_STALDRV=y
-# CONFIG_STALLION is not set
-# CONFIG_ISTALLION is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
CONFIG_NOZOMI=m
#
# Serial drivers
#
-CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_PCI=m
-CONFIG_SERIAL_8250_PNP=m
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=16
-CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
+# CONFIG_SERIAL_8250_FOURPORT is not set+# CONFIG_SERIAL_8250_BOCA is not
set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_CORE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=0
+# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
+CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
+CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
-CONFIG_IPMI_PANIC_EVENT=y
-CONFIG_IPMI_PANIC_STRING=y
+# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
-CONFIG_NVRAM=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=y
+CONFIG_DTLK=m
CONFIG_R3964=m
-CONFIG_APPLICOM=m
+# CONFIG_APPLICOM is not set
CONFIG_SONYPI=m
#
# PCMCIA character devices
# CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
-CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=4096
-# CONFIG_HPET is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_HPET=y
+# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
@@ -2400,16 +2398,15 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
-CONFIG_I2C_GPIO=m
-CONFIG_I2C_OCORES=m
-# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SIMTEC=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_TAOS_EVM=m
+# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
#
@@ -2420,75 +2417,36 @@
#
# Other I2C/SMBus bus drivers
#
+CONFIG_I2C_PCA_ISA=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_STUB=m
-CONFIG_SCx200_I2C=m
-CONFIG_SCx200_I2C_SCL=12
-CONFIG_SCx200_I2C_SDA=13
-CONFIG_SCx200_ACB=m
+# CONFIG_SCx200_ACB is not set
#
# Miscellaneous I2C Chip support
#
-CONFIG_DS1682=m
+# CONFIG_DS1682 is not set+CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_MAX6875=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=m
-CONFIG_SPI_BUTTERFLY=m
-# CONFIG_SPI_GPIO is not set
-CONFIG_SPI_LM70_LLP=m
-
-#
-# SPI Protocol Masters
-#
-CONFIG_SPI_SPIDEV=m
-CONFIG_SPI_TLE62X0=m
+# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-CONFIG_GPIO_MAX732X=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_GPIO_PCF857X=m
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-CONFIG_GPIO_MAX7301=m
-CONFIG_GPIO_MCP23S08=m
+# CONFIG_GPIOLIB is not set
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#+# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
-CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
@@ -2499,33 +2457,32 @@
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
-# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=m
-CONFIG_BATTERY_DS2760=m
-CONFIG_BATTERY_OLPC=m
-# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_OLPC=y
+CONFIG_BATTERY_BQ27x00=m
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
-CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
-# CONFIG_SENSORS_ADT7462 is not set
+CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7473=m
-# CONFIG_SENSORS_ADT7475 is not set
+CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
-# CONFIG_SENSORS_ATK0110 is not set
+CONFIG_SENSORS_ATK0110=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
@@ -2535,7 +2492,7 @@
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_FSCHMD=m
-# CONFIG_SENSORS_G760A is not set
+CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m@@ -2543,7 +2500,6 @@
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
@@ -2554,16 +2510,14 @@
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
-# CONFIG_SENSORS_LTC4215 is not set
+CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
+CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
-# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_SMSC47M1=m
@@ -2583,11 +2537,10 @@
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
-# CONFIG_SENSORS_LIS3LV02D is not set
+CONFIG_SENSORS_LIS3LV02D=m
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_THERMAL=m
-CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -2595,37 +2548,43 @@
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
-CONFIG_ACQUIRE_WDT=m
-CONFIG_ADVANTECH_WDT=m
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
-CONFIG_SC520_WDT=m
-CONFIG_EUROTECH_WDT=m
-CONFIG_IB700_WDT=m
+# CONFIG_SC520_WDT is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_IB700_WDT is not set-CONFIG_WAFER_WDT=m
+# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
-# CONFIG_IT87_WDT is not set
+CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
-CONFIG_SC1200_WDT=m
-CONFIG_SCx200_WDT=m
-CONFIG_PC87413_WDT=m
-CONFIG_60XX_WDT=m
-CONFIG_SBC8360_WDT=m
-CONFIG_SBC7240_WDT=m
-CONFIG_CPU5_WDT=m
+# CONFIG_SC1200_WDT is not set
+# CONFIG_PC87413_WDT is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_SBC7240_WDT is not set
+# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
-CONFIG_SMSC37B787_WDT=m
+# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
-# CONFIG_W83697UG_WDT is not set
+CONFIG_W83697UG_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
-CONFIG_SBC_EPX_C3_WATCHDOG=m
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
#
# PCI-based Watchdog Cards
@@ -2660,12 +2619,9 @@
#
CONFIG_MFD_CORE=m
CONFIG_MFD_SM501=m
-CONFIG_MFD_SM501_GPIO=y
-CONFIG_HTC_PASIC3=m
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+CONFIG_MFD_WM8400=m
@@ -2699,14 +2655,10 @@
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
-CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
@@ -2721,42 +2673,80 @@
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_TCM825X=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_SAA7191=m
+# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
+
+#
+# Video improvement chips
+#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
-CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
+# CONFIG_VIDEO_PMS is not set
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
@@ -2786,7 +2776,7 @@
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_MT9M001=m
-# CONFIG_SOC_CAMERA_MT9M111 is not set
+CONFIG_SOC_CAMERA_MT9M111=m
# CONFIG_SOC_CAMERA_MT9T031 is not set
CONFIG_SOC_CAMERA_MT9V022=m
# CONFIG_SOC_CAMERA_TW9910 is not set
@@ -2796,42 +2786,44 @@
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
+CONFIG_USB_M5602=m-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_OV519=m
# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-# CONFIG_VIDEO_HDPVR is not set
+CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
-# CONFIG_VIDEO_CX231XX is not set+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
@@ -2845,7 +2837,7 @@
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
-CONFIG_USB_ZC0301=m
+# CONFIG_USB_ZC0301 is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
@@ -2853,12 +2845,23 @@
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
CONFIG_USB_DSBR=m
CONFIG_USB_SI470X=m
-# CONFIG_USB_MR800 is not set
+CONFIG_USB_MR800=m
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
@@ -2878,32 +2881,7 @@
#
# Supported USB Adapters
#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-# CONFIG_DVB_USB_CXUSB is not set
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_DW2102=m
-# CONFIG_DVB_USB_CINERGY_T2 is not set
-CONFIG_DVB_USB_ANYSEE=m
-# CONFIG_DVB_USB_DTV5100 is not set
-# CONFIG_DVB_USB_AF9015 is not set
-# CONFIG_DVB_USB_CE6230 is not set
+# CONFIG_DVB_USB is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_SIANO_SMS1XXX=m
@@ -2933,11 +2911,6 @@
# CONFIG_DVB_DM1105 is not set
#
-# Supported FireWire (IEEE 1394) Adapters
-#
-# CONFIG_DVB_FIREDTV is not set
-
-#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
@@ -2948,8 +2921,6 @@
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0288=m
-CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
@@ -2961,8 +2932,6 @@
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
-CONFIG_DVB_CX24116=m
-CONFIG_DVB_SI21XX=m
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
@@ -2971,9 +2940,6 @@
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m CONFIG_DVB_S5H1411=m
CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
@@ -2998,17 +2963,17 @@
#
# Graphics support
#
-CONFIG_AGP=m
-CONFIG_AGP_ALI=m
-CONFIG_AGP_ATI=m
-CONFIG_AGP_AMD=m
-CONFIG_AGP_AMD64=m
-CONFIG_AGP_INTEL=m
-CONFIG_AGP_NVIDIA=m
-CONFIG_AGP_SIS=m
-CONFIG_AGP_SWORKS=m
-CONFIG_AGP_VIA=m
-CONFIG_AGP_EFFICEON=m
+CONFIG_AGP=y
+CONFIG_AGP_ALI=y
+CONFIG_AGP_ATI=y
+CONFIG_AGP_AMD=y
+CONFIG_AGP_AMD64=y
+CONFIG_AGP_INTEL=y
+CONFIG_AGP_NVIDIA=y
+CONFIG_AGP_SIS=y
+CONFIG_AGP_SWORKS=y
+CONFIG_AGP_VIA=y
+CONFIG_AGP_EFFICEON=y
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
@@ -3024,7 +2989,7 @@
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
@@ -3037,7 +3002,6 @@
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
@@ -3048,32 +3012,30 @@
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m-CONFIG_FB_CYBER2000=m
-CONFIG_FB_ARC=m
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
-CONFIG_FB_IMSTT=y
+# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
-CONFIG_FB_UVESA=m
+# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
-CONFIG_FB_N411=m
-CONFIG_FB_HGA=m
-CONFIG_FB_HGA_ACCEL=y
-CONFIG_FB_S1D13XXX=m
+CONFIG_FB_EFI=y
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
-CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
-CONFIG_FB_LE80578=m
-CONFIG_FB_CARILLO_RANCH=m
+# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
@@ -3081,13 +3043,15 @@
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
-# CONFIG_FB_MATROX_I2C is not set
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
-CONFIG_FB_SIS=m
-CONFIG_FB_SIS_300=y
-CONFIG_FB_SIS_315=y
-# CONFIG_FB_VIA is not set
+# CONFIG_FB_SIS is not set
+CONFIG_FB_VIA=m
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
-CONFIG_FB_VT8623=m
+# CONFIG_FB_VT8623 is not set
CONFIG_FB_TRIDENT=m
-CONFIG_FB_ARK=m
-CONFIG_FB_PM3=m
-CONFIG_FB_CARMINE=m
-CONFIG_FB_CARMINE_DRAM_EVAL=y
-# CONFIG_CARMINE_DRAM_CUSTOM is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=m
-CONFIG_FB_GEODE_GX=m
-CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_GEODE_LX=y
+CONFIG_FB_GEODE_GX=y
+# CONFIG_FB_GEODE_GX1 is not set
# CONFIG_FB_TMIO is not set
CONFIG_FB_SM501=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=y
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+# CONFIG_FB_MB862XX_PCI_GDC is not set
+CONFIG_FB_BROADSHEET=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_LTV350QV=m
-CONFIG_LCD_ILI9320=m
-# CONFIG_LCD_TDO24M is not set
-CONFIG_LCD_VGG2432A4=m
+# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=m
#
# Display device support
@@ -3154,14 +3111,18 @@
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
@@ -3177,19 +3138,22 @@
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
+CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
+CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTS64=m
@@ -3197,8 +3161,43 @@
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CS4231 is not set
+CONFIG_SND_CS4236=m
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_ES1688 is not set
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+CONFIG_SND_OPL3SA2=m
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_MIRO=m
+# CONFIG_SND_SB8 is not set
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+# CONFIG_SND_SB16_CSP is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_WAVEFRONT is not set
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
@@ -3209,7 +3208,7 @@
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
-CONFIG_SND_AW2=m
+# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
@@ -3220,7 +3219,7 @@
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
-# CONFIG_SND_CS5530 is not set
+CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
@@ -3248,7 +3247,7 @@
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
-CONFIG_SND_HDA_INPUT_BEEP=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
@@ -3287,87 +3286,63 @@
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
-CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
-# CONFIG_SND_USB_US122L is not set
-CONFIG_SND_PCMCIA=y
-CONFIG_SND_VXPOCKET=m
-CONFIG_SND_PDAUDIOCF=m
+CONFIG_SND_USB_US122L=m
+# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
-CONFIG_SOUND_PRIME=m
-CONFIG_SOUND_OSS=m
-CONFIG_SOUND_TRACEINIT=y
-CONFIG_SOUND_DMAP=y
-CONFIG_SOUND_SSCAPE=m
-CONFIG_SOUND_VMIDI=m
-CONFIG_SOUND_TRIX=m
-CONFIG_SOUND_MSS=m
-CONFIG_SOUND_MPU401=m
-CONFIG_SOUND_PAS=m
-CONFIG_SOUND_PSS=m
-CONFIG_PSS_MIXER=y
-# CONFIG_PSS_HAVE_BOOT is not set
-CONFIG_SOUND_SB=m
-CONFIG_SOUND_YM3812=m
-CONFIG_SOUND_UART6850=m
-CONFIG_SOUND_AEDSP16=m
-CONFIG_SC6600=y
-CONFIG_SC6600_JOY=y
-CONFIG_SC6600_CDROM=4
-CONFIG_SC6600_CDROMBASE=0x0-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
-CONFIG_USB_HID=m
+CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=m
-CONFIG_HID_KYE=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_KENSINGTON=m
-CONFIG_HID_LOGITECH=m
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_DRAGONRISE_FF=m
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_NTRIG=m
-CONFIG_HID_PANTHERLORD=m
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
# CONFIG_GREENASIA_FF is not set
-CONFIG_HID_TOPSEED=m
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+CONFIG_HID_TOPSEED=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=m
+CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
@@ -3379,43 +3354,38 @@
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
-CONFIG_USB_MON=m
+CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
-CONFIG_USB_C67X00_HCD=m
-CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
-CONFIG_USB_ISP116X_HCD=m
-CONFIG_USB_ISP1760_HCD=m
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_HCD_SSB is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_U132_HCD is not set
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_SL811_CS is not set
#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
-# CONFIG_USB_TMC is not set
+CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
@@ -3458,7 +3428,7 @@
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP210X is not set
+CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -3468,23 +3438,11 @@
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
+# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
@@ -3501,7 +3459,7 @@
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_SYMBOL=m CONFIG_USB_SERIAL_XIRCOM=m
@@ -3516,14 +3474,14 @@
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
-# CONFIG_USB_SEVSEG is not set
-CONFIG_USB_RIO500=m
+CONFIG_USB_SEVSEG=m
+# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
@@ -3534,7 +3492,7 @@
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
-# CONFIG_USB_VST is not set
+CONFIG_USB_VST=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
@@ -3544,8 +3502,8 @@
#
# OTG and related infrastructure
#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_OTG_UTILS=y
+CONFIG_NOP_USB_XCEIV=m
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
@@ -3557,7 +3515,7 @@
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
-CONFIG_MMC_TEST=m
+# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
@@ -3583,38 +3541,32 @@
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CLASS=y
#
-CONFIG_LEDS_NET48XX=m
-CONFIG_LEDS_WRAP=m
# CONFIG_LEDS_ALIX2 is not set
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_LP5521=m
CONFIG_LEDS_CLEVO_MAIL=m
-CONFIG_LEDS_PCA955X=m
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_BD2802=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_EDAC=y
#
@@ -3628,16 +3580,18 @@
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
-# CONFIG_EDAC_X38 is not set
+CONFIG_EDAC_X38=m
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
+CONFIG_EDAC_AMD8131=m
+CONFIG_EDAC_AMD8111=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
@@ -3645,8 +3599,8 @@
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_TEST=m
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
@@ -3662,34 +3616,27 @@
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
-CONFIG_RTC_DRV_S35390A=m
+# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
-# CONFIG_RTC_DRV_RX8581 is not set
+CONFIG_RTC_DRV_RX8581=m
#
# SPI RTC drivers
#
-CONFIG_RTC_DRV_M41T94=m
-CONFIG_RTC_DRV_DS1305=m
-# CONFIG_RTC_DRV_DS1390 is not set
-CONFIG_RTC_DRV_MAX6902=m
-CONFIG_RTC_DRV_R9701=m
-CONFIG_RTC_DRV_RS5C348=m
-# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
-CONFIG_RTC_DRV_CMOS=m
-# CONFIG_RTC_DRV_DS1286 is not set
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
-CONFIG_RTC_DRV_M48T86=m
-# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
-# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_V3020=m
# CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_SMX=m
-# CONFIG_UIO_AEC is not set
-# CONFIG_UIO_SERCOS3 is not set
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
@@ -3719,12 +3666,11 @@
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
-CONFIG_STAGING=y
-CONFIG_STAGING_EXCLUDE_BUILD=y
+# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ASUS_LAPTOP=m
-# CONFIG_DELL_WMI is not set
+CONFIG_DELL_WMI=m
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_TC1100_WMI=m
@@ -3741,8 +3687,8 @@
CONFIG_THINKPAD_ACPI_BAY=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
-CONFIG_INTEL_MENLOW=m
-CONFIG_EEEPC_LAPTOP=m
+# CONFIG_INTEL_MENLOW is not set
+# CONFIG_EEEPC_LAPTOP is not set
CONFIG_ACPI_WMI=m
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_TOSHIBA=m
@@ -3753,6 +3699,7 @@
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
@@ -3766,21 +3713,26 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y-CONFIG_JBD_DEBUG=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
-CONFIG_FS_MBCACHE=m
+CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
@@ -3788,20 +3740,20 @@
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
-CONFIG_JFS_STATISTICS=y
+# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
+# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
# CONFIG_GFS2_FS_LOCKING_DLM is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
-CONFIG_OCFS2_FS_STATS=y
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_OCFS2_FS_POSIX_ACL is not set
@@ -3811,12 +3763,12 @@
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=m
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=y+# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
@@ -3842,27 +3794,25 @@
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
+# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
@@ -3875,33 +3825,25 @@
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=y
+CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
-CONFIG_HPFS_FS=m
+# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
@@ -3910,8 +3852,9 @@
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
+# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_EXOFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
@@ -3934,8 +3877,7 @@
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
@@ -3953,8 +3895,7 @@
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FS is not set
#
# Partition Types
@@ -3962,25 +3903,24 @@
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
+# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
-CONFIG_ULTRIX_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_SYSV68_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
@@ -4003,7 +3943,7 @@
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
+CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
@@ -4019,7 +3959,7 @@
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
+CONFIG_DLM_DEBUG=y
#
# Kernel hacking
@@ -4027,23 +3967,28 @@
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ALLOW_WARNINGS=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set+CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -4051,35 +3996,34 @@
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
+CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-CONFIG_RCU_TORTURE_TEST=m
+CONFIG_BOOT_PRINTK_DELAY=y
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-CONFIG_LKDTM=m
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set-CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -4087,30 +4031,32 @@
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+CONFIG_BUILD_DOCSRC=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
+CONFIG_KGDB=y
+CONFIG_KGDB_SERIAL_CONSOLE=y
+CONFIG_KGDB_TESTS=y
+# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
-# CONFIG_STRICT_DEVMEM is not set
-CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_STRICT_DEVMEM=y
+# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_4KSTACKS is not set
+CONFIG_4KSTACKS=y
CONFIG_DOUBLEFAULT=y
CONFIG_X86_DS_SELFTEST=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
@@ -4123,9 +4069,9 @@
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DEBUG_BOOT_PARAMS is not set
+CONFIG_DEBUG_BOOT_PARAMS=y+CONFIG_OPTIMIZE_INLINING=y
#
# Security options
@@ -4135,18 +4081,20 @@
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
+CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_XOR_BLOCKS=m
@@ -4158,7 +4106,7 @@
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
@@ -4175,7 +4123,7 @@
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
@@ -4207,15 +4155,15 @@
# Digest
#
CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CRC32C_INTEL is not set
+CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
@@ -4240,7 +4188,7 @@
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_TWOFISH is not set
+CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
@@ -4248,27 +4196,30 @@
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_DEV_PADLOCK=m
-CONFIG_CRYPTO_DEV_PADLOCK_AES=m
-CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_GEODE=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
-# CONFIG_KVM is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTIO_BALLOON is not set
-CONFIG_BINARY_PRINTF=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_TRACE=y
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -4279,10 +4230,10 @@
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
-CONFIG_CRC7=m
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
</CODE>
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Wed, 22 Jul 2009 20:32:33 +0300
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Thu, Jul 23, 2009 at 01:17:23AM +0800, Teo En Ming (Zhang Enming) wrote:
> Dear Pasik,
>
> This morning when I go to office i will examine the differences between
> your .config and my .config using diff and create a patch. I will then
> look through the generated patch file and patch my .config accordingly.
>
Yep.
Just remember my .config is a mess; it's originally based on some Fedora 10
default kernel, and then changed many times after that..
But it works for me :)
I've been compiling and running on Fedora 10 and Fedora 11, using Xen 3.3.1
and Xen 3.4.0.
-- Pasi
> Regards,
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics) BEng(Hons)(Mechanical
> Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> Teo En Ming (Zhang Enming) wrote:
> >Hi Pasik
> >
> >I suspect that the Z0_startup_32 error has something to do with
> >compiling 32-bit xen kernels. The problem may not appear when
> >compiling 64-bit xen kernels.
> >
> >Pasi Kärkkäinen wrote:
> >>On Wed, Jul 22, 2009 at 07:04:48PM +0300, Pasi Kärkkäinen wrote:
> >>
> >>>On Wed, Jul 22, 2009 at 11:47:11PM +0800, Teo En Ming wrote:
> >>>
> >>>>OOOPS! I still got an error compiling the kernel image. Please advise.
> >>>>See console output below.
> >>>>
> >>>>
> >>>
<http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.30-rc6-tip-next-n
o-highpte>
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.30-rc6-tip-next-no
-highpte
> >>>
> >>>That's some random .config from me.. it should work. It works for me.
> >>>
> >>>
> >>
> >>I was using that .config with xen-tip/next pv_ops dom0 kernel.
> >>
> >>-- Pasi
> >>
> >>_______________________________________________
> >>Xen-devel mailing list
> >>Xen-devel@lists.xensource.com
> >> <http://lists.xensource.com/xen-devel>
http://lists.xensource.com/xen-devel
> >>
> >
> >------------------------------------------------------------------------
> >
> >
> >No virus found in this outgoing message.
> >Checked by AVG - www.avg.com
> >Version: 8.5.392 / Virus Database: 270.13.20/2251 - Release Date:
07/20/09
> >18:29:00
> >
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >Xen-devel mailing list
> >Xen-devel@lists.xensource.com
> >http://lists.xensource.com/xen-devel
> >
>
>
> No virus found in this outgoing message.
> Checked by AVG - www.avg.com
> Version: 8.5.392 / Virus Database: 270.13.20/2251 - Release Date: 07/20/09
18:29:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.13.24/2255 - Release Date: 07/22/09
18:00:00
[-- Attachment #1.2: Type: text/html, Size: 142523 bytes --]
[-- Attachment #2: ATT00016.txt --]
[-- Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-23 9:12 ` Teo En Ming
@ 2009-07-23 10:02 ` Teo En Ming
2009-07-23 10:09 ` Pasi Kärkkäinen
1 sibling, 0 replies; 86+ messages in thread
From: Teo En Ming @ 2009-07-23 10:02 UTC (permalink / raw)
To: Teo En Ming, 'Pasi Kärkkäinen'
Cc: xen-devel, jeremy.fitzhardinge
[-- Attachment #1.1: Type: text/plain, Size: 189964 bytes --]
Hi,
I commented out the following lines in /etc/init.d/xend:
<CODE>
#if ! grep -q "control_d" /proc/xen/capabilities ; then
# exit 0
#fi
</CODE>
Then I tried to start the xend daemon. It produces the following errors:
==================================================================================================================
ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
Traceback (most recent call last):
File "/usr/sbin/xend", line 36, in <module>
from xen.xend.server import SrvDaemon
File "usr/lib/python2.6/site-packages/xen/xend/server/SrvDaemon.py", line
26, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/server/relocate.py", line
28, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/XendDomain.py", line 35, in
<module>
File "usr/lib/python2.6/site-packages/xen/xend/XendCheckpoint.py", line
20, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/image.py", line 46, in
<module>
xen.lowlevel.xc.Error: (1, 'Internal error', 'Could not obtain handle on
privileged command interface (2 = No such file or directory)')
ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
Traceback (most recent call last):
File "/usr/sbin/xend", line 36, in <module>
from xen.xend.server import SrvDaemon
File "usr/lib/python2.6/site-packages/xen/xend/server/SrvDaemon.py", line
26, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/server/relocate.py", line
28, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/XendDomain.py", line 35, in
<module>
File "usr/lib/python2.6/site-packages/xen/xend/XendCheckpoint.py", line
20, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/image.py", line 46, in
<module>
xen.lowlevel.xc.Error: (1, 'Internal error', 'Could not obtain handle on
privileged command interface (2 = No such file or directory)')
.ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
Traceback (most recent call last):
File "/usr/sbin/xend", line 36, in <module>
from xen.xend.server import SrvDaemon
File "usr/lib/python2.6/site-packages/xen/xend/server/SrvDaemon.py", line
26, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/server/relocate.py", line
28, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/XendDomain.py", line 35, in
<module>
File "usr/lib/python2.6/site-packages/xen/xend/XendCheckpoint.py", line
20, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/image.py", line 46, in
<module>
xen.lowlevel.xc.Error: (1, 'Internal error', 'Could not obtain handle on
privileged command interface (2 = No such file or directory)')
.ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
Traceback (most recent call last):
File "/usr/sbin/xend", line 36, in <module>
from xen.xend.server import SrvDaemon
File "usr/lib/python2.6/site-packages/xen/xend/server/SrvDaemon.py", line
26, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/server/relocate.py", line
28, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/XendDomain.py", line 35, in
<module>
File "usr/lib/python2.6/site-packages/xen/xend/XendCheckpoint.py", line
20, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/image.py", line 46, in
<module>
xen.lowlevel.xc.Error: (1, 'Internal error', 'Could not obtain handle on
privileged command interface (2 = No such file or directory)')
.ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
Traceback (most recent call last):
File "/usr/sbin/xend", line 36, in <module>
from xen.xend.server import SrvDaemon
File "usr/lib/python2.6/site-packages/xen/xend/server/SrvDaemon.py", line
26, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/server/relocate.py", line
28, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/XendDomain.py", line 35, in
<module>
File "usr/lib/python2.6/site-packages/xen/xend/XendCheckpoint.py", line
20, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/image.py", line 46, in
<module>
xen.lowlevel.xc.Error: (1, 'Internal error', 'Could not obtain handle on
privileged command interface (2 = No such file or directory)')
.ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
Traceback (most recent call last):
File "/usr/sbin/xend", line 36, in <module>
from xen.xend.server import SrvDaemon
File "usr/lib/python2.6/site-packages/xen/xend/server/SrvDaemon.py", line
26, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/server/relocate.py", line
28, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/XendDomain.py", line 35, in
<module>
File "usr/lib/python2.6/site-packages/xen/xend/XendCheckpoint.py", line
20, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/image.py", line 46, in
<module>
xen.lowlevel.xc.Error: (1, 'Internal error', 'Could not obtain handle on
privileged command interface (2 = No such file or directory)')
.ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
Traceback (most recent call last):
File "/usr/sbin/xend", line 36, in <module>
from xen.xend.server import SrvDaemon
File "usr/lib/python2.6/site-packages/xen/xend/server/SrvDaemon.py", line
26, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/server/relocate.py", line
28, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/XendDomain.py", line 35, in
<module>
File "usr/lib/python2.6/site-packages/xen/xend/XendCheckpoint.py", line
20, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/image.py", line 46, in
<module>
xen.lowlevel.xc.Error: (1, 'Internal error', 'Could not obtain handle on
privileged command interface (2 = No such file or directory)')
.ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
Traceback (most recent call last):
File "/usr/sbin/xend", line 36, in <module>
from xen.xend.server import SrvDaemon
File "usr/lib/python2.6/site-packages/xen/xend/server/SrvDaemon.py", line
26, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/server/relocate.py", line
28, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/XendDomain.py", line 35, in
<module>
File "usr/lib/python2.6/site-packages/xen/xend/XendCheckpoint.py", line
20, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/image.py", line 46, in
<module>
xen.lowlevel.xc.Error: (1, 'Internal error', 'Could not obtain handle on
privileged command interface (2 = No such file or directory)')
.ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
Traceback (most recent call last):
File "/usr/sbin/xend", line 36, in <module>
from xen.xend.server import SrvDaemon
File "usr/lib/python2.6/site-packages/xen/xend/server/SrvDaemon.py", line
26, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/server/relocate.py", line
28, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/XendDomain.py", line 35, in
<module>
File "usr/lib/python2.6/site-packages/xen/xend/XendCheckpoint.py", line
20, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/image.py", line 46, in
<module>
xen.lowlevel.xc.Error: (1, 'Internal error', 'Could not obtain handle on
privileged command interface (2 = No such file or directory)')
.ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
Traceback (most recent call last):
File "/usr/sbin/xend", line 36, in <module>
from xen.xend.server import SrvDaemon
File "usr/lib/python2.6/site-packages/xen/xend/server/SrvDaemon.py", line
26, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/server/relocate.py", line
28, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/XendDomain.py", line 35, in
<module>
File "usr/lib/python2.6/site-packages/xen/xend/XendCheckpoint.py", line
20, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/image.py", line 46, in
<module>
xen.lowlevel.xc.Error: (1, 'Internal error', 'Could not obtain handle on
privileged command interface (2 = No such file or directory)')
.ERROR Internal error: Could not obtain handle on privileged command
interface (2 = No such file or directory)
Traceback (most recent call last):
File "/usr/sbin/xend", line 36, in <module>
from xen.xend.server import SrvDaemon
File "usr/lib/python2.6/site-packages/xen/xend/server/SrvDaemon.py", line
26, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/server/relocate.py", line
28, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/XendDomain.py", line 35, in
<module>
File "usr/lib/python2.6/site-packages/xen/xend/XendCheckpoint.py", line
20, in <module>
File "usr/lib/python2.6/site-packages/xen/xend/image.py", line 46, in
<module>
xen.lowlevel.xc.Error: (1, 'Internal error', 'Could not obtain handle on
privileged command interface (2 = No such file or directory)')
================================================================================================================
Although I have no files in the virtual filesystem /proc/xen at all, I do
have /sys/hypervisor/properties/capabilities# cat
/sys/hypervisor/properties/capabilities
xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Teo En Ming" <enming.teo@asiasoftsea.net>, "'Pasi Kärkkäinen'"
<pasik@iki.fi>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Thu, 23 Jul 2009 17:12:56 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Hi,
I have successfully booted up the pvops enabled Xen Dom 0 kernel but it
seems I cannot start the xend daemon.
It complains:
grep: /proc/xen/capabilities: No such file or directory
My /etc/fstab is as follows:
/dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part1
swap
swap
defaults
0 0
/dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part2
/
ext3
acl,user_xattr 1 1
/dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part3
/home
ext3
acl,user_xattr 1 2
proc
/proc
proc
defaults
0 0
sysfs
/sys
sysfs
noauto
0 0
debugfs
/sys/kernel/debug debugfs
noauto
0 0
devpts
/dev/pts
devpts
mode=0620,gid=5 0 0
none
/proc/xen
xenfs
defaults
0 0
Please also see
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-self-compiled-paravirt-ops-pvops.html
Thank you!
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "'Teo En Ming'" <enming.teo@asiasoftsea.net>, 'Pasi
Kärkkäinen' <pasik@iki.fi>
Cc: <xen-devel@lists.xensource.com>,
<jeremy.fitzhardinge@citrix.com>
Date: Thu, 23 Jul 2009 17:19:31 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
kernel modules build success!
<CODE>
IHEX2FW firmware/whiteheat_loader.fw
IHEX2FW firmware/whiteheat.fw
IHEX2FW firmware/keyspan_pda/keyspan_pda.fw
IHEX2FW firmware/keyspan_pda/xircom_pgs.fw
H16TOFW firmware/vicam/firmware.fw
IHEX firmware/cpia2/stv0672_vp4.bin
IHEX firmware/yam/1200.bin
IHEX firmware/yam/9600.bin
</CODE>
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "'Teo En Ming'" <enming.teo@asiasoftsea.net>, 'Pasi
Kärkkäinen' <pasik@iki.fi>
Cc: xen-devel@lists.xensource.com,
jeremy.fitzhardinge@citrix.com
Date: Thu, 23 Jul 2009 11:27:38 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Dear Pasik,
Success in compiling the Xen Dom 0 paravirt
ops enabled kernel!
<CODE>
LD
Documentation/video4linux/built-in.o
HOSTCC Documentation/video4linux/v4lgrab
LD
Documentation/vm/built-in.o
HOSTCC Documentation/vm/slabinfo
LD
Documentation/watchdog/src/built-in.o
HOSTCC
Documentation/watchdog/src/watchdog-simple
HOSTCC
Documentation/watchdog/src/watchdog-test
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
CC
arch/x86/boot/a20.o
AS
arch/x86/boot/bioscall.o
CC
arch/x86/boot/cmdline.o
AS
arch/x86/boot/copy.o
HOSTCC arch/x86/boot/mkcpustr
CPUSTR arch/x86/boot/cpustr.h
CC
arch/x86/boot/cpu.o
CC
arch/x86/boot/cpucheck.o
CC
arch/x86/boot/edd.o
VOFFSET arch/x86/boot/voffset.h
LDS
arch/x86/boot/compressed/vmlinux.lds
AS
arch/x86/boot/compressed/head_32.o
CC
arch/x86/boot/compressed/misc.o
OBJCOPY arch/x86/boot/compressed/vmlinux.bin
HOSTCC arch/x86/boot/compressed/relocs
RELOCS
arch/x86/boot/compressed/vmlinux.relocs
GZIP
arch/x86/boot/compressed/vmlinux.bin.gz
HOSTCC arch/x86/boot/compressed/mkpiggy
MKPIGGY arch/x86/boot/compressed/piggy.S
AS
arch/x86/boot/compressed/piggy.o
LD
arch/x86/boot/compressed/vmlinux
ZOFFSET arch/x86/boot/zoffset.h
AS
arch/x86/boot/header.o
CC
arch/x86/boot/main.o
CC
arch/x86/boot/mca.o
CC
arch/x86/boot/memory.o
CC
arch/x86/boot/pm.o
AS
arch/x86/boot/pmjump.o
CC
arch/x86/boot/printf.o
CC
arch/x86/boot/regs.o
CC
arch/x86/boot/string.o
CC
arch/x86/boot/tty.o
CC
arch/x86/boot/video.o
CC
arch/x86/boot/video-mode.o
CC
arch/x86/boot/version.o
CC
arch/x86/boot/apm.o
CC
arch/x86/boot/video-vga.o
CC
arch/x86/boot/video-vesa.o
CC
arch/x86/boot/video-bios.o
LD
arch/x86/boot/setup.elf
OBJCOPY arch/x86/boot/setup.bin
OBJCOPY arch/x86/boot/vmlinux.bin
HOSTCC arch/x86/boot/tools/build
BUILD arch/x86/boot/bzImage
Root device is (8, 2)
Setup is 13932 bytes (padded to 14336 bytes).
System is 2784 kB
CRC 17b52ba1
Kernel: arch/x86/boot/bzImage is ready (#4)
</CODE>
Thank you!!!
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone:
+65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: xen-devel@lists.xensource.com,
jeremy.fitzhardinge@citrix.com
Date: Thu, 23 Jul 2009 10:21:39 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0
in Jeremy's PVOPS Kernel
Dear Pasik,
I just did a diff this morning. Here are the
differences between my kernel configuration and your kernel configuration.
<CODE>
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
-CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_MEM_RES_CTLR=y
-# CONFIG_CGROUP_MEM_RES_CTLR_SWAP is not set
-CONFIG_MM_OWNER=y
+# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
@@ -135,7 +131,7 @@
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
@@ -158,15 +154,15 @@
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
-CONFIG_OPROFILE=m
-# CONFIG_OPROFILE_IBS is not set
+# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -182,10 +178,10 @@
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
@@ -205,24 +201,24 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
-# CONFIG_SPARSE_IRQ is not set
+CONFIG_SPARSE_IRQ=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_RDC321X is not set
-CONFIG_X86_32_NON_STANDARD=y
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
+# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
@@ -235,25 +231,24 @@
CONFIG_XEN_PRIVILEGED_GUEST=y
# CONFIG_XEN_PCI_PASSTHROUGH_DEBUG is not set
CONFIG_MICROCODE_XEN=y
-# CONFIG_VMI is not set
+CONFIG_VMI=y
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
-# CONFIG_PARAVIRT_SPINLOCKS is not set
+CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_MEMTEST is not set
-CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
-CONFIG_M686=y
+# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
-# CONFIG_MPENTIUM4 is not set
+CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
@@ -274,9 +269,8 @@
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=5
+CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
-CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
@@ -296,21 +290,24 @@
CONFIG_CPU_SUP_UMC_32=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
-# CONFIG_HPET_TIMER is not set
+CONFIG_HPET_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=8
-# CONFIG_SCHED_SMT is not set
+CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is
not set
-# CONFIG_X86_MCE is not set
+CONFIG_X86_MCE=y
+# CONFIG_X86_MCE_NONFATAL is not set
+CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
@@ -350,7 +347,7 @@
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_MMU_NOTIFIER=y
-# CONFIG_HIGHPTE is not set
+CONFIG_HIGHPTE=n
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
@@ -359,23 +356,23 @@
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
-# CONFIG_EFI is not set
+CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
+# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x1000000
+CONFIG_CRASH_DUMP=y
+CONFIG_PHYSICAL_START=0x400000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
-CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_PHYSICAL_ALIGN=0x400000
CONFIG_HOTPLUG_CPU=y
-CONFIG_COMPAT_VDSO=y
+# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -383,10 +380,15 @@
# Power management and ACPI options
#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_TRACE=y
+CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
@@ -395,32 +397,75 @@
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
-CONFIG_ACPI_AC=m
-CONFIG_ACPI_BATTERY=m
-CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
-CONFIG_ACPI_FAN=m
+CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_THERMAL=m
-CONFIG_ACPI_CUSTOM_DSDT_FILE=""
+CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=2001
-CONFIG_ACPI_DEBUG=y
-# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
+CONFIG_ACPI_BLACKLIST_YEAR=1999
+# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
-CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=m
-# CONFIG_APM is not set
+CONFIG_X86_APM_BOOT=y
+CONFIG_APM=y
+# CONFIG_APM_IGNORE_USER_SUSPEND is not set
+# CONFIG_APM_DO_ENABLE is not set
+CONFIG_APM_CPU_IDLE=y
+# CONFIG_APM_DISPLAY_BLANK is not set
+# CONFIG_APM_ALLOW_INTS is not set
#
# CPU Frequency scaling
#
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not
set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m+
+#
+# CPUFreq processor drivers
+#
+CONFIG_X86_ACPI_CPUFREQ=m
+# CONFIG_X86_POWERNOW_K6 is not set
+CONFIG_X86_POWERNOW_K7=y
+CONFIG_X86_POWERNOW_K7_ACPI=y
+CONFIG_X86_POWERNOW_K8=m
+# CONFIG_X86_GX_SUSPMOD is not set
+# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
+CONFIG_X86_SPEEDSTEP_ICH=y
+CONFIG_X86_SPEEDSTEP_SMI=y
+CONFIG_X86_P4_CLOCKMOD=m
+# CONFIG_X86_CPUFREQ_NFORCE2 is not set
+CONFIG_X86_LONGRUN=y
+# CONFIG_X86_LONGHAUL is not set
+CONFIG_X86_E_POWERSAVER=y
+
+#
+# shared options
+#
+CONFIG_X86_SPEEDSTEP_LIB=y
+# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
@@ -451,15 +496,15 @@
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
-# CONFIG_ISA is not set
+CONFIG_ISA=y
+# CONFIG_EISA is not set
# CONFIG_MCA is not set
-CONFIG_SCx200=m
-CONFIG_SCx200HR_TIMER=m
+# CONFIG_SCx200 is not set
CONFIG_OLPC=y
CONFIG_K8_NB=y
-CONFIG_PCCARD=m
+CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
@@ -475,17 +520,19 @@
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
+CONFIG_I82365=m
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_IBM is not set
-CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI_COMPAQ=m
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+CONFIG_HOTPLUG_PCI_IBM=m
+CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
-CONFIG_HOTPLUG_PCI_CPCI=y
-CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
-CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
-CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
@@ -493,22 +540,22 @@
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not
set
CONFIG_HAVE_AOUT=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
-CONFIG_PACKET=m
+CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
@@ -561,12 +608,12 @@
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
+CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
@@ -582,8 +629,9 @@
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -596,7 +644,7 @@
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
@@ -615,8 +663,8 @@
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
@@ -628,6 +676,7 @@
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
@@ -637,7 +686,7 @@
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_DCCP=m@@ -657,9
+706,11 @@
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is
not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
@@ -701,17 +752,17 @@
#
# IP: Netfilter Configuration
#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_DEFRAG_IPV4=y
+CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
@@ -766,7 +817,7 @@
#
# DECnet: Netfilter Configuration
#
-CONFIG_DECNET_NF_GRABULATOR=m
+# CONFIG_DECNET_NF_GRABULATOR is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -805,19 +856,21 @@
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
-# CONFIG_NET_DCCPPROBE is not set
+CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set-#
CONFIG_TIPC is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
-CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
+# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_STP=m
@@ -829,21 +882,21 @@
CONFIG_DECNET=m
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
-CONFIG_LLC2=m
+# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
+# CONFIG_LTPC is not set
+# CONFIG_COPS is not set
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
-CONFIG_X25=m
-CONFIG_LAPB=m
-CONFIG_ECONET=m
-# CONFIG_ECONET_AUNUDP is not set
-# CONFIG_ECONET_NATIVE is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
+CONFIG_PHONET=m
CONFIG_NET_SCHED=y
#
@@ -881,7 +934,13 @@
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_CLS_CGROUP is not set
-# CONFIG_NET_EMATCH is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m@@ -892,7 +951,7 @@
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
-# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
@@ -900,7 +959,7 @@
# Network testing
#
CONFIG_NET_PKTGEN=m
-CONFIG_NET_TCPPROBE=m
+# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
@@ -918,6 +977,9 @@
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
+CONFIG_SCC=m
+# CONFIG_SCC_DELAY is not set
+CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
@@ -940,13 +1002,13 @@
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
+# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
+CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
@@ -1017,14 +1079,12 @@
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
-CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-CONFIG_RXKAD=m
+# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not
set+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
@@ -1057,14 +1117,14 @@
#
# Generic Driver Options
#
-CONFIG_UEVENT_HELPER_PATH=""
-# CONFIG_STANDALONE is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_DEBUG_DEVRES=y
CONFIG_SYS_HYPERVISOR=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
@@ -1083,15 +1143,15 @@
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
-CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
CONFIG_RFD_FTL=m
-# CONFIG_SSFDC is not set
+CONFIG_SSFDC=m
CONFIG_MTD_OOPS=m
#
@@ -1100,11 +1160,7 @@
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y@@ -1115,49
+1171,43 @@
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
-CONFIG_MTD_SBC_GXX=m
-CONFIG_MTD_SCx200_DOCFLASH=m
-CONFIG_MTD_AMD76XROM=m
-CONFIG_MTD_ICHXROM=m
+# CONFIG_MTD_SBC_GXX is not set
+# CONFIG_MTD_AMD76XROM is not set
+# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
-CONFIG_MTD_NETtel=m
-CONFIG_MTD_DILNETPC=m
-CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
-CONFIG_MTD_L440GX=m
+# CONFIG_MTD_NETtel is not set
+# CONFIG_MTD_DILNETPC is not set
+# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
-CONFIG_MTD_INTEL_VR_NOR=m
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
-CONFIG_MTD_PMC551_BUGFIX=y
+# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set+# CONFIG_MTD_SLRAM is
not set
+# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
@@ -1166,15 +1216,9 @@
#
# Disk-On-Chip Device Drivers
#
-CONFIG_MTD_DOC2000=m
-CONFIG_MTD_DOC2001=m
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-CONFIG_MTD_DOCPROBE_ADVANCED=y
-CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
-CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_DOCPROBE_55AA=y
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
@@ -1183,17 +1227,13 @@
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is
not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
-# CONFIG_MTD_NAND_CS553X is not set
+CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
+# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ALAUDA=m
-CONFIG_MTD_ONENAND=m
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-CONFIG_MTD_ONENAND_OTP=y
-CONFIG_MTD_ONENAND_2X_PROGRAM=y
-CONFIG_MTD_ONENAND_SIM=m
+# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
@@ -1215,11 +1255,11 @@
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_PC_SUPERIO=y
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
@@ -1228,9 +1268,12 @@
#
# Protocols
#
+CONFIG_ISAPNP=y
+# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
+# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE=m
#
@@ -1267,116 +1310,50 @@
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=64000
-CONFIG_BLK_DEV_XIP=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
-CONFIG_CDROM_PKTCDVD_WCACHE=y
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=y
+CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
-CONFIG_PHANTOM=m
+# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
-# CONFIG_ICS932S401 is not set
+CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HP_ILO=m
# CONFIG_DELL_LAPTOP is not set
# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
+CONFIG_C2PORT=m
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_93CX6=m
CONFIG_HAVE_IDE=y
-CONFIG_IDE=m
-
-#
-# Please see Documentation/ide/ide.txt for help/info
on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=m
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-CONFIG_BLK_DEV_IDECS=m
-CONFIG_BLK_DEV_DELKIN=m
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEACPI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-CONFIG_BLK_DEV_PLATFORM=m
-CONFIG_BLK_DEV_CMD640=m
-CONFIG_BLK_DEV_CMD640_ENHANCED=y
-CONFIG_BLK_DEV_IDEPNP=m
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_BLK_DEV_OFFBOARD=y
-CONFIG_BLK_DEV_GENERIC=m
-CONFIG_BLK_DEV_OPTI621=m
-CONFIG_BLK_DEV_RZ1000=m
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-CONFIG_BLK_DEV_AEC62XX=m
-CONFIG_BLK_DEV_ALI15X3=m
-CONFIG_BLK_DEV_AMD74XX=m
-CONFIG_BLK_DEV_ATIIXP=m
-CONFIG_BLK_DEV_CMD64X=m
-CONFIG_BLK_DEV_TRIFLEX=m
-CONFIG_BLK_DEV_CS5520=m-# CONFIG_BLK_DEV_CS5536 is
not set
-CONFIG_BLK_DEV_HPT366=m
-CONFIG_BLK_DEV_JMICRON=m
-CONFIG_BLK_DEV_SC1200=m
-CONFIG_BLK_DEV_PIIX=m
-# CONFIG_BLK_DEV_IT8172 is not set
-CONFIG_BLK_DEV_IT8213=m
-CONFIG_BLK_DEV_IT821X=m
-CONFIG_BLK_DEV_NS87415=m
-CONFIG_BLK_DEV_PDC202XX_OLD=m
-CONFIG_BLK_DEV_PDC202XX_NEW=m
-CONFIG_BLK_DEV_SVWKS=m
-CONFIG_BLK_DEV_SIIMAGE=m
-CONFIG_BLK_DEV_SIS5513=m
-CONFIG_BLK_DEV_SLC90E66=m
-CONFIG_BLK_DEV_TRM290=m
-CONFIG_BLK_DEV_VIA82CXXX=m
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
+CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
@@ -1385,12 +1362,12 @@
#
# SCSI support type (disk, tape, CD-ROM)
#
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
@@ -1400,7 +1377,7 @@
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
-CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
-CONFIG_SCSI_CXGB3_ISCSI=m
+# CONFIG_SCSI_CXGB3_ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
+# CONFIG_SCSI_7000FASST is not set
CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AHA152X=m
+# CONFIG_SCSI_AHA1542 is not set
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
-CONFIG_AIC7XXX_RESET_DELAY_MS=5000
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=32
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
-CONFIG_AIC79XX_REG_PRETTY_PRINT=y
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
-CONFIG_AIC94XX_DEBUG=y
-CONFIG_SCSI_DPT_I2O=m
+# CONFIG_AIC94XX_DEBUG is not set
+# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=m
+# CONFIG_SCSI_IN2000 is not set
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
@@ -1448,20 +1429,22 @@
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
-# CONFIG_SCSI_MPT2SAS is not set
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_MPT2SAS_MAX_SGE=128
+# CONFIG_SCSI_MPT2SAS_LOGGING is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m-CONFIG_FCOE=m
-CONFIG_SCSI_DMX3191D=m
-CONFIG_SCSI_EATA=m
-CONFIG_SCSI_EATA_TAGGED_QUEUE=y
-CONFIG_SCSI_EATA_LINKED_COMMANDS=y
-CONFIG_SCSI_EATA_MAX_TAGS=16
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
@@ -1470,23 +1453,28 @@
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_MVSAS=m
+# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_IPR=m
-CONFIG_SCSI_IPR_TRACE=y
-CONFIG_SCSI_IPR_DUMP=y
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+# CONFIG_SCSI_SYM53C416 is not set
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
-CONFIG_SCSI_NSP32=m
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_SRP=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
@@ -1494,21 +1482,24 @@
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
-CONFIG_SCSI_DH=m CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
-# CONFIG_SCSI_OSD_INITIATOR is not set
-CONFIG_ATA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
+CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=m
+CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
-CONFIG_ATA_PIIX=m
+CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
@@ -1539,10 +1530,12 @@
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
-# CONFIG_PATA_HPT3X3_DMA is not set
+CONFIG_PATA_HPT3X3_DMA=y
+# CONFIG_PATA_ISAPNP is not set
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
+# CONFIG_PATA_LEGACY is not set
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
@@ -1555,15 +1548,17 @@
CONFIG_PATA_OPTIDMA=m
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
-CONFIG_PATA_RADISYS=m
-CONFIG_PATA_RZ1000=m
-CONFIG_PATA_SC1200=m
+CONFIG_PATA_QDI=m
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
+# CONFIG_PATA_WINBOND_VLB is not set
CONFIG_PATA_SCH=m
CONFIG_MD=y CONFIG_MD_RAID6_PQ=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_DELAY=m
+# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
-CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
-# CONFIG_FUSION_LOGGING is not set
+CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
@@ -1601,20 +1596,13 @@
#
# Enable only one of the two stacks, unless you
know what you are doing
#
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=m
-CONFIG_IEEE1394_OHCI1394=m
-CONFIG_IEEE1394_PCILYNX=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_DV1394=m
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_SBP2=m
+# CONFIG_IEEE1394 is not set
CONFIG_I2O=m
-CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
@@ -1623,7 +1611,8 @@
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
-# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_IFB=m
@@ -1634,15 +1623,7 @@
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_NET_SB1000=m
-CONFIG_ARCNET=m
-CONFIG_ARCNET_1201=m
-CONFIG_ARCNET_1051=m
-CONFIG_ARCNET_RAW=m
-CONFIG_ARCNET_CAP=m
-CONFIG_ARCNET_COM90xx=m
-CONFIG_ARCNET_COM90xxIO=m
-CONFIG_ARCNET_RIM_I=m
-# CONFIG_ARCNET_COM20020 is not set
+# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
@@ -1662,32 +1643,52 @@
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MDIO_BITBANG=m
-# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
+# CONFIG_EL1 is not set
+# CONFIG_EL2 is not set
+# CONFIG_ELPLUS is not set
+# CONFIG_EL16 is not set
+CONFIG_EL3=m
+# CONFIG_3C515 is not set
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
-CONFIG_ENC28J60=m
-# CONFIG_ENC28J60_WRITEVERIFY is not set
-# CONFIG_ETHOC is not set
+# CONFIG_LANCE is not set
+CONFIG_NET_VENDOR_SMC=y
+CONFIG_ULTRA=m
+# CONFIG_SMC9194 is not set
+CONFIG_ETHOC=m
+# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-CONFIG_TULIP_NAPI=y
-CONFIG_TULIP_NAPI_HW_MITIGATION=y
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
-CONFIG_HP100=m
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+CONFIG_EWRK3=m
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=m
+# CONFIG_ZNET is not set
+# CONFIG_SEEQ8005 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -1699,12 +1700,15 @@
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
+# CONFIG_CS89x0 is not set
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
@@ -1723,7 +1727,7 @@
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
-# CONFIG_VIA_RHINE_MMIO is not set
+CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
@@ -1738,7 +1742,7 @@
CONFIG_E1000E=m
CONFIG_IP1000=m CONFIG_IGB=m
-# CONFIG_IGBVF is not set
+CONFIG_IGBVF=m
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
@@ -1756,55 +1760,52 @@
CONFIG_ATL1=m
CONFIG_ATL1E=m
# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
+CONFIG_JME=m
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=m
-# CONFIG_ENIC is not set
+CONFIG_ENIC=m
CONFIG_IXGBE=m
CONFIG_IXGB=m
CONFIG_S2IO=m
CONFIG_MYRI10GE=m
CONFIG_NIU=m
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
+CONFIG_MLX4_EN=m
+CONFIG_MLX4_CORE=m
+CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
-# CONFIG_QLGE is not set
-CONFIG_SFC=m
-CONFIG_SFC_MTD=y
-# CONFIG_BE2NET is not set
+CONFIG_QLGE=m
+# CONFIG_SFC is not set
+CONFIG_BE2NET=m
CONFIG_TR=y
+# CONFIG_IBMTR is not set
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
-CONFIG_TMS380TR=m
-CONFIG_TMSPCI=m
-CONFIG_ABYSS=m
+# CONFIG_TMS380TR is not set
+# CONFIG_SMCTR is not set
#
# Wireless LAN
#
-CONFIG_WLAN_PRE80211=y
-CONFIG_STRIP=m
-CONFIG_PCMCIA_WAVELAN=m
-CONFIG_PCMCIA_NETWAVE=m-CONFIG_PCMCIA_RAYCS=m
+# CONFIG_PCMCIA_RAYCS is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_LIBERTAS_DEBUG=y
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AIRO=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
-# CONFIG_AT76C50X_USB is not set
+CONFIG_AT76C50X_USB=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
@@ -1814,17 +1815,17 @@
CONFIG_RTL8187=m
CONFIG_ADM8211=m
CONFIG_MAC80211_HWSIM=m
-# CONFIG_MWL8K is not set
+CONFIG_MWL8K=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
-# CONFIG_P54_SPI is not set
CONFIG_P54_LEDS=y
CONFIG_ATH5K=m
-# CONFIG_ATH5K_DEBUG is not set
+CONFIG_ATH5K_DEBUG=y
CONFIG_ATH9K=m
# CONFIG_ATH9K_DEBUG is not set
-# CONFIG_AR9170_USB is not set
+CONFIG_AR9170_USB=m
+CONFIG_AR9170_LEDS=y
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
@@ -1840,7 +1841,8 @@
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLWIFI_RFKILL=y
# CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT is not
set
-# CONFIG_IWLWIFI_DEBUG is not set
+CONFIG_IWLWIFI_DEBUG=y
+CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWLAGN=m
CONFIG_IWL4965=y
CONFIG_IWL5000=y
@@ -1859,13 +1861,14 @@
CONFIG_B43_PIO=y
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
-# CONFIG_B43_DEBUG is not set+CONFIG_B43_DEBUG=y
+# CONFIG_B43_FORCE_PIO is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_RFKILL=y
-# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
@@ -1896,9 +1899,9 @@
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_CDC_EEM is not set
+CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_DM9601=m
-# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
@@ -1923,63 +1926,40 @@
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_PCMCIA_IBMTR=m
-CONFIG_WAN=y
-CONFIG_LANMEDIA=m
-CONFIG_HDLC=m
-CONFIG_HDLC_RAW=m
-CONFIG_HDLC_RAW_ETH=m
-CONFIG_HDLC_CISCO=m
-CONFIG_HDLC_FR=m
-CONFIG_HDLC_PPP=m
-CONFIG_HDLC_X25=m
-CONFIG_PCI200SYN=m
-CONFIG_WANXL=m
-CONFIG_PC300TOO=m
-CONFIG_FARSYNC=m
-# CONFIG_DSCC4 is not set
-CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
-# CONFIG_WAN_ROUTER_DRIVERS is not set
-CONFIG_LAPBETHER=m
-CONFIG_X25_ASY=m
-# CONFIG_SBNI is not set
+# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
-CONFIG_ATM_DUMMY=m
+# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m-CONFIG_ATM_ZATM=m
-# CONFIG_ATM_ZATM_DEBUG is not set
+# CONFIG_ATM_ZATM is not set
CONFIG_ATM_NICSTAR=m
-CONFIG_ATM_NICSTAR_USE_SUNI=y
-CONFIG_ATM_NICSTAR_USE_IDT77105=y
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
-CONFIG_ATM_IDT77252_RCV_ALL=y
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
-CONFIG_ATM_IA=m
-# CONFIG_ATM_IA_DEBUG is not set
+# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=m
-CONFIG_ATM_FORE200E_USE_TASKLET=y
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
-CONFIG_ATM_HE_USE_SUNI=y
+# CONFIG_ATM_HE_USE_SUNI is not set
# CONFIG_ATM_SOLOS is not set
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
-CONFIG_HIPPI=y
-CONFIG_ROADRUNNER=m
-CONFIG_ROADRUNNER_LARGE_RINGS=y
+# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
@@ -1987,7 +1967,7 @@
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
@@ -1996,23 +1976,23 @@
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_VIRTIO_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
+# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
-CONFIG_ISDN_X25=y
#
# ISDN feature submodules
@@ -2033,9 +2013,9 @@
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
-# CONFIG_HISAX_NO_SENDCOMPLETE is not set
-# CONFIG_HISAX_NO_LLC is not set
-# CONFIG_HISAX_NO_KEYPAD is not set
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
@@ -2043,17 +2023,27 @@
#
# HiSax supported cards
#
+# CONFIG_HISAX_16_0 is not set
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
+# CONFIG_HISAX_AVM_A1 is not set
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
+# CONFIG_HISAX_IX1MICROR2 is not set
CONFIG_HISAX_DIEHLDIVA=y
+# CONFIG_HISAX_ASUSCOM is not set
+# CONFIG_HISAX_TELEINT is not set
+# CONFIG_HISAX_HFCS is not set
CONFIG_HISAX_SEDLBAUER=y
+# CONFIG_HISAX_SPORTSTER is not set
+# CONFIG_HISAX_MIC is not set
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
+# CONFIG_HISAX_ISURF is not set
+# CONFIG_HISAX_HSTSAPHIR is not set
CONFIG_HISAX_BKM_A4T=y CONFIG_HISAX_GAZEL=y
@@ -2061,7 +2051,7 @@
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
-CONFIG_HISAX_DEBUG=y
+# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
@@ -2075,7 +2065,7 @@
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
+# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
@@ -2083,6 +2073,10 @@
#
# Active cards
#
+# CONFIG_ISDN_DRV_ICN is not set
+# CONFIG_ISDN_DRV_PCBIT is not set
+# CONFIG_ISDN_DRV_SC is not set
+# CONFIG_ISDN_DRV_ACT2000 is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_ISDN_DRV_GIGASET=m
@@ -2090,10 +2084,10 @@
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
-CONFIG_GIGASET_UNDOCREQ=y
+# CONFIG_GIGASET_UNDOCREQ is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
+# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
@@ -2104,8 +2098,10 @@
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
+# CONFIG_ISDN_DRV_AVMB1_B1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+# CONFIG_ISDN_DRV_AVMB1_T1ISA is not set
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
@@ -2117,20 +2113,20 @@
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m-CONFIG_PHONE=m
+# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
+CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
@@ -2143,12 +2139,11 @@
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_KEYBOARD_NEWTON=m
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
@@ -2158,12 +2153,14 @@
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_PS2_OLPC is not set
+CONFIG_MOUSE_PS2_OLPC=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_GPIO=m
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
@@ -2193,6 +2190,7 @@
CONFIG_JOYSTICK_XPAD=m+#
CONFIG_JOYSTICK_WALKERA0701 is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
@@ -2200,10 +2198,7 @@
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
@@ -2212,13 +2207,11 @@
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
+# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
@@ -2243,19 +2236,18 @@
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
-# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_CT82C710=m
-CONFIG_SERIO_PARKBD=m
-CONFIG_SERIO_PCIPS2=m
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
@@ -2272,94 +2264,100 @@
CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
+# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_COMPUTONE=m
+# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
-CONFIG_CYZ_INTR=y
-CONFIG_DIGIEPCA=m
-CONFIG_MOXA_INTELLIO=m
-CONFIG_MOXA_SMARTIO=m
-CONFIG_ISI=m
+# CONFIG_CYZ_INTR is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
-CONFIG_RISCOM8=m
-CONFIG_SPECIALIX=m
-CONFIG_SX=m
-CONFIG_RIO=m
-CONFIG_RIO_OLDPCI=y
-CONFIG_STALDRV=y
-# CONFIG_STALLION is not set
-# CONFIG_ISTALLION is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
CONFIG_NOZOMI=m
#
# Serial drivers
#
-CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_PCI=m
-CONFIG_SERIAL_8250_PNP=m
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=16
-CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
+# CONFIG_SERIAL_8250_FOURPORT is not set+#
CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_CORE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=0
+# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
+CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
+CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
-CONFIG_IPMI_PANIC_EVENT=y
-CONFIG_IPMI_PANIC_STRING=y
+# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
-CONFIG_NVRAM=m
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=y
+CONFIG_DTLK=m
CONFIG_R3964=m
-CONFIG_APPLICOM=m
+# CONFIG_APPLICOM is not set
CONFIG_SONYPI=m
#
# PCMCIA character devices
# CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
-CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=4096
-# CONFIG_HPET is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_HPET=y
+# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
@@ -2400,16 +2398,15 @@
#
# I2C system bus drivers (mostly embedded /
system-on-chip)
#
-CONFIG_I2C_GPIO=m
-CONFIG_I2C_OCORES=m
-# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SIMTEC=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_TAOS_EVM=m
+# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
#
@@ -2420,75 +2417,36 @@
#
# Other I2C/SMBus bus drivers
#
+CONFIG_I2C_PCA_ISA=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_STUB=m
-CONFIG_SCx200_I2C=m
-CONFIG_SCx200_I2C_SCL=12
-CONFIG_SCx200_I2C_SDA=13
-CONFIG_SCx200_ACB=m
+# CONFIG_SCx200_ACB is not set
#
# Miscellaneous I2C Chip support
#
-CONFIG_DS1682=m
+# CONFIG_DS1682 is not set+CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_MAX6875=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=m
-CONFIG_SPI_BUTTERFLY=m
-# CONFIG_SPI_GPIO is not set
-CONFIG_SPI_LM70_LLP=m
-
-#
-# SPI Protocol Masters
-#
-CONFIG_SPI_SPIDEV=m
-CONFIG_SPI_TLE62X0=m
+# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-CONFIG_GPIO_MAX732X=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_GPIO_PCF857X=m
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-CONFIG_GPIO_MAX7301=m
-CONFIG_GPIO_MCP23S08=m
+# CONFIG_GPIOLIB is not set
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#+# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
-CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
@@ -2499,33 +2457,32 @@
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
-# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
-CONFIG_PDA_POWER=m
-CONFIG_BATTERY_DS2760=m
-CONFIG_BATTERY_OLPC=m
-# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_OLPC=y
+CONFIG_BATTERY_BQ27x00=m
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
-CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
-# CONFIG_SENSORS_ADT7462 is not set
+CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7473=m
-# CONFIG_SENSORS_ADT7475 is not set
+CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
-# CONFIG_SENSORS_ATK0110 is not set
+CONFIG_SENSORS_ATK0110=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
@@ -2535,7 +2492,7 @@
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_FSCHMD=m
-# CONFIG_SENSORS_G760A is not set
+CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_GL518SM=m@@ -2543,7 +2500,6 @@
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
@@ -2554,16 +2510,14 @@
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
-# CONFIG_SENSORS_LTC4215 is not set
+CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
+CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_PCF8591=m
-# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_SMSC47M1=m
@@ -2583,11 +2537,10 @@
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
-# CONFIG_SENSORS_LIS3LV02D is not set
+CONFIG_SENSORS_LIS3LV02D=m
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_THERMAL=m
-CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -2595,37 +2548,43 @@
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
-CONFIG_ACQUIRE_WDT=m
-CONFIG_ADVANTECH_WDT=m
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
-CONFIG_SC520_WDT=m
-CONFIG_EUROTECH_WDT=m
-CONFIG_IB700_WDT=m
+# CONFIG_SC520_WDT is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_IB700_WDT is not set-CONFIG_WAFER_WDT=m
+# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
-# CONFIG_IT87_WDT is not set
+CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
-CONFIG_SC1200_WDT=m
-CONFIG_SCx200_WDT=m
-CONFIG_PC87413_WDT=m
-CONFIG_60XX_WDT=m
-CONFIG_SBC8360_WDT=m
-CONFIG_SBC7240_WDT=m
-CONFIG_CPU5_WDT=m
+# CONFIG_SC1200_WDT is not set
+# CONFIG_PC87413_WDT is not set
+# CONFIG_60XX_WDT is not set
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_SBC7240_WDT is not set
+# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
-CONFIG_SMSC37B787_WDT=m
+# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
-# CONFIG_W83697UG_WDT is not set
+CONFIG_W83697UG_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
-CONFIG_SBC_EPX_C3_WATCHDOG=m
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
#
# PCI-based Watchdog Cards
@@ -2660,12 +2619,9 @@
#
CONFIG_MFD_CORE=m
CONFIG_MFD_SM501=m
-CONFIG_MFD_SM501_GPIO=y
-CONFIG_HTC_PASIC3=m
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+CONFIG_MFD_WM8400=m
@@ -2699,14 +2655,10 @@
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
-CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
@@ -2721,42 +2673,80 @@
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
CONFIG_VIDEO_IR_I2C=m
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
+
+#
+# RDS decoders
+#
CONFIG_VIDEO_SAA6588=m
+
+#
+# Video decoders CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_TCM825X=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_SAA7191=m
+# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
+
+#
+# Video improvement chips
+#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
-CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
+# CONFIG_VIDEO_PMS is not set
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
@@ -2786,7 +2776,7 @@
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_MT9M001=m
-# CONFIG_SOC_CAMERA_MT9M111 is not set
+CONFIG_SOC_CAMERA_MT9M111=m
# CONFIG_SOC_CAMERA_MT9T031 is not set
CONFIG_SOC_CAMERA_MT9V022=m
# CONFIG_SOC_CAMERA_TW9910 is not set
@@ -2796,42 +2786,44 @@
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
+CONFIG_USB_M5602=m-# CONFIG_USB_GSPCA_ETOMS is not
set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_OV519=m
# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-# CONFIG_VIDEO_HDPVR is not set
+CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
-# CONFIG_VIDEO_CX231XX is not
set+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_ALSA=m
+CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
@@ -2845,7 +2837,7 @@
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
-CONFIG_USB_ZC0301=m
+# CONFIG_USB_ZC0301 is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
@@ -2853,12 +2845,23 @@
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
CONFIG_USB_DSBR=m
CONFIG_USB_SI470X=m
-# CONFIG_USB_MR800 is not set
+CONFIG_USB_MR800=m
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
@@ -2878,32 +2881,7 @@
#
# Supported USB Adapters
#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-# CONFIG_DVB_USB_CXUSB is not set
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_DW2102=m
-# CONFIG_DVB_USB_CINERGY_T2 is not set
-CONFIG_DVB_USB_ANYSEE=m
-# CONFIG_DVB_USB_DTV5100 is not set
-# CONFIG_DVB_USB_AF9015 is not set
-# CONFIG_DVB_USB_CE6230 is not set
+# CONFIG_DVB_USB is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_SIANO_SMS1XXX=m
@@ -2933,11 +2911,6 @@
# CONFIG_DVB_DM1105 is not set
#
-# Supported FireWire (IEEE 1394) Adapters
-#
-# CONFIG_DVB_FIREDTV is not set
-
-#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
@@ -2948,8 +2921,6 @@
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0288=m
-CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
@@ -2961,8 +2932,6 @@
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
-CONFIG_DVB_CX24116=m
-CONFIG_DVB_SI21XX=m
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
@@ -2971,9 +2940,6 @@
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m CONFIG_DVB_S5H1411=m
CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
@@ -2998,17 +2963,17 @@
#
# Graphics support
#
-CONFIG_AGP=m
-CONFIG_AGP_ALI=m
-CONFIG_AGP_ATI=m
-CONFIG_AGP_AMD=m
-CONFIG_AGP_AMD64=m
-CONFIG_AGP_INTEL=m
-CONFIG_AGP_NVIDIA=m
-CONFIG_AGP_SIS=m
-CONFIG_AGP_SWORKS=m
-CONFIG_AGP_VIA=m
-CONFIG_AGP_EFFICEON=m
+CONFIG_AGP=y
+CONFIG_AGP_ALI=y
+CONFIG_AGP_ATI=y
+CONFIG_AGP_AMD=y
+CONFIG_AGP_AMD64=y
+CONFIG_AGP_INTEL=y
+CONFIG_AGP_NVIDIA=y
+CONFIG_AGP_SIS=y
+CONFIG_AGP_SWORKS=y
+CONFIG_AGP_VIA=y
+CONFIG_AGP_EFFICEON=y
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
@@ -3024,7 +2989,7 @@
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
@@ -3037,7 +3002,6 @@
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
@@ -3048,32 +3012,30 @@
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m-CONFIG_FB_CYBER2000=m
-CONFIG_FB_ARC=m
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
-CONFIG_FB_IMSTT=y
+# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
-CONFIG_FB_UVESA=m
+# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
-CONFIG_FB_N411=m
-CONFIG_FB_HGA=m
-CONFIG_FB_HGA_ACCEL=y
-CONFIG_FB_S1D13XXX=m
+CONFIG_FB_EFI=y
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
-CONFIG_FB_RIVA_I2C=y
+# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I810=m
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
-CONFIG_FB_LE80578=m
-CONFIG_FB_CARILLO_RANCH=m
+# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
@@ -3081,13 +3043,15 @@
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
-# CONFIG_FB_MATROX_I2C is not set
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
+CONFIG_FB_ATY128=m
+CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
-CONFIG_FB_SIS=m
-CONFIG_FB_SIS_300=y
-CONFIG_FB_SIS_315=y
-# CONFIG_FB_VIA is not set
+# CONFIG_FB_SIS is not set
+CONFIG_FB_VIA=m
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
-CONFIG_FB_VT8623=m
+# CONFIG_FB_VT8623 is not set
CONFIG_FB_TRIDENT=m
-CONFIG_FB_ARK=m
-CONFIG_FB_PM3=m
-CONFIG_FB_CARMINE=m
-CONFIG_FB_CARMINE_DRAM_EVAL=y
-# CONFIG_CARMINE_DRAM_CUSTOM is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=m
-CONFIG_FB_GEODE_GX=m
-CONFIG_FB_GEODE_GX1=m
+CONFIG_FB_GEODE_LX=y
+CONFIG_FB_GEODE_GX=y
+# CONFIG_FB_GEODE_GX1 is not set
# CONFIG_FB_TMIO is not set
CONFIG_FB_SM501=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=y
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
+CONFIG_FB_METRONOME=m
+CONFIG_FB_MB862XX=m
+# CONFIG_FB_MB862XX_PCI_GDC is not set
+CONFIG_FB_BROADSHEET=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_LCD_LTV350QV=m
-CONFIG_LCD_ILI9320=m
-# CONFIG_LCD_TDO24M is not set
-CONFIG_LCD_VGG2432A4=m
+# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=m
#
# Display device support
@@ -3154,14 +3111,18 @@
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not
set
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
@@ -3177,19 +3138,22 @@
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
+CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
+CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTS64=m
@@ -3197,8 +3161,43 @@
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+CONFIG_SND_ADLIB=m
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CS4231 is not set
+CONFIG_SND_CS4236=m
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_ES1688 is not set
+CONFIG_SND_ES18XX=m
+CONFIG_SND_SC6000=m
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+CONFIG_SND_OPL3SA2=m
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_MIRO=m
+# CONFIG_SND_SB8 is not set
+CONFIG_SND_SB16=m
+CONFIG_SND_SBAWE=m
+# CONFIG_SND_SB16_CSP is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_WAVEFRONT is not set
+CONFIG_SND_MSND_PINNACLE=m
+CONFIG_SND_MSND_CLASSIC=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
@@ -3209,7 +3208,7 @@
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
-CONFIG_SND_AW2=m
+# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
@@ -3220,7 +3219,7 @@
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
-# CONFIG_SND_CS5530 is not set
+CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m-# CONFIG_SND_INDIGOIOX is
not set
-# CONFIG_SND_INDIGODJX is not set
+CONFIG_SND_INDIGOIOX=m
+CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
@@ -3248,7 +3247,7 @@
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
-CONFIG_SND_HDA_INPUT_BEEP=y
+# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
@@ -3287,87 +3286,63 @@
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
-CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
-# CONFIG_SND_USB_US122L is not set
-CONFIG_SND_PCMCIA=y
-CONFIG_SND_VXPOCKET=m
-CONFIG_SND_PDAUDIOCF=m
+CONFIG_SND_USB_US122L=m
+# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
-CONFIG_SOUND_PRIME=m
-CONFIG_SOUND_OSS=m
-CONFIG_SOUND_TRACEINIT=y
-CONFIG_SOUND_DMAP=y
-CONFIG_SOUND_SSCAPE=m
-CONFIG_SOUND_VMIDI=m
-CONFIG_SOUND_TRIX=m
-CONFIG_SOUND_MSS=m
-CONFIG_SOUND_MPU401=m
-CONFIG_SOUND_PAS=m
-CONFIG_SOUND_PSS=m
-CONFIG_PSS_MIXER=y
-# CONFIG_PSS_HAVE_BOOT is not set
-CONFIG_SOUND_SB=m
-CONFIG_SOUND_YM3812=m
-CONFIG_SOUND_UART6850=m
-CONFIG_SOUND_AEDSP16=m
-CONFIG_SC6600=y
-CONFIG_SC6600_JOY=y
-CONFIG_SC6600_CDROM=4
-CONFIG_SC6600_CDROMBASE=0x0-CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
-CONFIG_USB_HID=m
+CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=m
-CONFIG_HID_KYE=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_KENSINGTON=m
-CONFIG_HID_LOGITECH=m
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_DRAGONRISE_FF=m
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_NTRIG=m
-CONFIG_HID_PANTHERLORD=m
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
# CONFIG_GREENASIA_FF is not set
-CONFIG_HID_TOPSEED=m
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+CONFIG_HID_TOPSEED=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=m
+CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
@@ -3379,43 +3354,38 @@
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
-CONFIG_USB_MON=m
+CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
-CONFIG_USB_C67X00_HCD=m
-CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
-CONFIG_USB_ISP116X_HCD=m
-CONFIG_USB_ISP1760_HCD=m
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_HCD_SSB is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_U132_HCD is not set
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_SL811_CS is not set
#
-# Enable Host or Gadget support to see Inventra
options
-#
-
-#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
-# CONFIG_USB_TMC is not set
+CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but
BLK_DEV_SD may
@@ -3458,7 +3428,7 @@
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP210X is not set
+CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -3468,23 +3438,11 @@
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
+# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
@@ -3501,7 +3459,7 @@
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_XIRCOM=m
@@ -3516,14 +3474,14 @@
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
-# CONFIG_USB_SEVSEG is not set
-CONFIG_USB_RIO500=m
+CONFIG_USB_SEVSEG=m
+# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
@@ -3534,7 +3492,7 @@
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
-# CONFIG_USB_VST is not set
+CONFIG_USB_VST=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
@@ -3544,8 +3502,8 @@
#
# OTG and related infrastructure
#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_OTG_UTILS=y
+CONFIG_NOP_USB_XCEIV=m
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
@@ -3557,7 +3515,7 @@
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
-CONFIG_MMC_TEST=m
+# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
@@ -3583,38 +3541,32 @@
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CLASS=y
#
-CONFIG_LEDS_NET48XX=m
-CONFIG_LEDS_WRAP=m
# CONFIG_LEDS_ALIX2 is not set
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_LP5521=m
CONFIG_LEDS_CLEVO_MAIL=m
-CONFIG_LEDS_PCA955X=m
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_BD2802=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config
(LED target)
#
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
CONFIG_EDAC=y
#
@@ -3628,16 +3580,18 @@
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
-# CONFIG_EDAC_X38 is not set
+CONFIG_EDAC_X38=m
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
+CONFIG_EDAC_AMD8131=m
+CONFIG_EDAC_AMD8111=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set+# CONFIG_RTC_HCTOSYS
is not set
+# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
@@ -3645,8 +3599,8 @@
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_TEST=m
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
@@ -3662,34 +3616,27 @@
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
-CONFIG_RTC_DRV_S35390A=m
+# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
-# CONFIG_RTC_DRV_RX8581 is not set
+CONFIG_RTC_DRV_RX8581=m
#
# SPI RTC drivers
#
-CONFIG_RTC_DRV_M41T94=m
-CONFIG_RTC_DRV_DS1305=m
-# CONFIG_RTC_DRV_DS1390 is not set
-CONFIG_RTC_DRV_MAX6902=m
-CONFIG_RTC_DRV_R9701=m
-CONFIG_RTC_DRV_RS5C348=m
-# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
-CONFIG_RTC_DRV_CMOS=m
-# CONFIG_RTC_DRV_DS1286 is not set
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
-CONFIG_RTC_DRV_M48T86=m
-# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
-# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_V3020=m
# CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_SMX=m
-# CONFIG_UIO_AEC is not set
-# CONFIG_UIO_SERCOS3 is not set
+CONFIG_UIO_AEC=m
+CONFIG_UIO_SERCOS3=m
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
@@ -3719,12 +3666,11 @@
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
-CONFIG_STAGING=y
-CONFIG_STAGING_EXCLUDE_BUILD=y
+# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ASUS_LAPTOP=m
-# CONFIG_DELL_WMI is not set
+CONFIG_DELL_WMI=m
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_TC1100_WMI=m
@@ -3741,8 +3687,8 @@
CONFIG_THINKPAD_ACPI_BAY=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
-CONFIG_INTEL_MENLOW=m
-CONFIG_EEEPC_LAPTOP=m
+# CONFIG_INTEL_MENLOW is not set
+# CONFIG_EEEPC_LAPTOP is not set
CONFIG_ACPI_WMI=m
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_TOSHIBA=m
@@ -3753,6 +3699,7 @@
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
@@ -3766,21 +3713,26 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y-CONFIG_JBD_DEBUG=y
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
CONFIG_JBD2_DEBUG=y
-CONFIG_FS_MBCACHE=m
+CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
@@ -3788,20 +3740,20 @@
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
-CONFIG_JFS_STATISTICS=y
+# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
+# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
# CONFIG_GFS2_FS_LOCKING_DLM is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
-CONFIG_OCFS2_FS_STATS=y
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_OCFS2_FS_POSIX_ACL is not set
@@ -3811,12 +3763,12 @@
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=m
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=y+# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
@@ -3842,27 +3794,25 @@
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
+# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
@@ -3875,33 +3825,25 @@
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=y
+CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
-CONFIG_HPFS_FS=m
+# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
@@ -3910,8 +3852,9 @@
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
+# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_EXOFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
@@ -3934,8 +3877,7 @@
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
@@ -3953,8 +3895,7 @@
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-# CONFIG_AFS_DEBUG is not set
+# CONFIG_AFS_FS is not set
#
# Partition Types
@@ -3962,25 +3903,24 @@
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not
set+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
+# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
-CONFIG_ULTRIX_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
-CONFIG_SYSV68_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
@@ -4003,7 +3943,7 @@
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
+CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
@@ -4019,7 +3959,7 @@
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
+CONFIG_DLM_DEBUG=y
#
# Kernel hacking
@@ -4027,23 +3967,28 @@
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ALLOW_WARNINGS=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not
set+CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -4051,35 +3996,34 @@
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
+CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-CONFIG_RCU_TORTURE_TEST=m
+CONFIG_BOOT_PRINTK_DELAY=y
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-CONFIG_LKDTM=m
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not
set-CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
-CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -4087,30 +4031,32 @@
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
-CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
+# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+CONFIG_BUILD_DOCSRC=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
+CONFIG_KGDB=y
+CONFIG_KGDB_SERIAL_CONSOLE=y
+CONFIG_KGDB_TESTS=y
+# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
-# CONFIG_STRICT_DEVMEM is not set
-CONFIG_X86_VERBOSE_BOOTUP=y
+CONFIG_STRICT_DEVMEM=y
+# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_4KSTACKS is not set
+CONFIG_4KSTACKS=y
CONFIG_DOUBLEFAULT=y
CONFIG_X86_DS_SELFTEST=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
@@ -4123,9 +4069,9 @@
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DEBUG_BOOT_PARAMS is not set
+CONFIG_DEBUG_BOOT_PARAMS=y+CONFIG_OPTIMIZE_INLINING=y
#
# Security options
@@ -4135,18 +4081,20 @@
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
+CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX
is not set
+# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_XOR_BLOCKS=m
@@ -4158,7 +4106,7 @@
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
@@ -4175,7 +4123,7 @@
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
@@ -4207,15 +4155,15 @@
# Digest
#
CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CRC32C_INTEL is not set
+CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
@@ -4240,7 +4188,7 @@
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_TWOFISH is not set
+CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
@@ -4248,27 +4196,30 @@
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_DEV_PADLOCK=m
-CONFIG_CRYPTO_DEV_PADLOCK_AES=m
-CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_GEODE=m
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
-# CONFIG_KVM is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTIO_BALLOON is not set
-CONFIG_BINARY_PRINTF=y
+CONFIG_KVM=m
+CONFIG_KVM_INTEL=m
+CONFIG_KVM_AMD=m
+CONFIG_KVM_TRACE=y
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -4279,10 +4230,10 @@
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
-CONFIG_CRC7=m
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
</CODE>
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>
Cc: xen-devel@lists.xensource.com,
jeremy.fitzhardinge@citrix.com
Date: Wed, 22 Jul 2009 20:32:33 +0300
Subject: Re: [Xen-devel] Unable to Configure Xen Dom
0 in Jeremy's PVOPS Kernel
On Thu,
Jul 23, 2009 at 01:17:23AM +0800, Teo En Ming (Zhang Enming) wrote:
> Dear Pasik,
>
> This morning when I go to office i will
examine the differences between
> your .config and my .config using diff and
create a patch. I will then
> look through the generated patch file and
patch my .config accordingly.
>
Yep.
Just remember my .config is a mess; it's originally
based on some Fedora 10
default kernel, and then changed many times after
that..
But it works for me :)
I've been compiling and running on Fedora 10 and
Fedora 11, using Xen 3.3.1
and Xen 3.4.0.
-- Pasi
> Regards,
>
> Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics) BEng(Hons)(Mechanical
> Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> Teo En Ming (Zhang Enming) wrote:
> >Hi Pasik
> >
> >I suspect that the Z0_startup_32 error has
something to do with
> >compiling 32-bit xen kernels. The problem
may not appear when
> >compiling 64-bit xen kernels.
> >
> >Pasi Kärkkäinen wrote:
> >>On Wed, Jul 22, 2009 at 07:04:48PM
+0300, Pasi Kärkkäinen wrote:
> >>
> >>>On Wed, Jul 22, 2009 at 11:47:11PM
+0800, Teo En Ming wrote:
> >>>
> >>>>OOOPS! I still got an error
compiling the kernel image. Please advise.
> >>>>See console output below.
> >>>>
> >>>>
>
>>>http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.30-rc6-tip-next-no-highpte
[http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.30-rc6-tip-next-no-highpte]
> >>>
> >>>That's some random .config from
me.. it should work. It works for me.
> >>>
> >>>
> >>
> >>I was using that .config with
xen-tip/next pv_ops dom0 kernel.
> >>
> >>-- Pasi
> >>
>
>>_______________________________________________
> >>Xen-devel mailing list
> >>Xen-devel@lists.xensource.com
> >>http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> >>
> >
>
>------------------------------------------------------------------------
> >
> >
> >No virus found in this outgoing message.
> >Checked by AVG - www.avg.com [http://www.avg.com/]
> >Version: 8.5.392 / Virus Database:
270.13.20/2251 - Release Date: 07/20/09
> >18:29:00
> >
> >
>
>------------------------------------------------------------------------
> >
>
>_______________________________________________
> >Xen-devel mailing list
> >Xen-devel@lists.xensource.com
> >http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> >
>
>
> No virus found in this outgoing message.
> Checked by AVG - www.avg.com [http://www.avg.com/]
> Version: 8.5.392 / Virus Database:
270.13.20/2251 - Release Date: 07/20/09 18:29:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 262522 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-23 10:09 ` Pasi Kärkkäinen
@ 2009-07-23 10:06 ` Teo En Ming
2009-07-23 10:19 ` Pasi Kärkkäinen
0 siblings, 1 reply; 86+ messages in thread
From: Teo En Ming @ 2009-07-23 10:06 UTC (permalink / raw)
To: Pasi Kärkkäinen; +Cc: xen-devel, jeremy.fitzhardinge
[-- Attachment #1.1: Type: text/plain, Size: 2679 bytes --]
Dear Pasi,
I ran the mount command without arguments and I got the following:
/dev/sda2 on / type ext3 (rw,acl,user_xattr)
/proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda3 on /home type ext3 (rw,acl,user_xattr)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
gvfs-fuse-daemon on /home/enming/.gvfs type fuse.gvfs-fuse-daemon
(rw,nosuid,nodev,user=enming)
Apparently /proc/xen is not mounted. Sob sob sob.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming <enming.teo@asiasoftsea.net>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Thu, 23 Jul 2009 13:09:20 +0300
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Thu, Jul 23, 2009 at 05:12:56PM +0800, Teo En Ming wrote:
> Hi,
>
> I have successfully booted up the pvops enabled Xen Dom 0 kernel but it
> seems I cannot start the xend daemon.
>
> It complains:
>
> grep: /proc/xen/capabilities: No such file or directory
>
> My /etc/fstab is as follows:
>
> /dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part1 swap swap
> defaults 0 0
> /dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part2 / ext3
> acl,user_xattr 1 1
> /dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part3 /home ext3
> acl,user_xattr 1 2
> proc /proc proc defaults
0
> 0
> sysfs /sys sysfs noauto
0
> 0
> debugfs /sys/kernel/debug debugfs noauto
0
> 0
> devpts /dev/pts devpts mode=0620,gid=5
0
> 0
> none /proc/xen xenfs defaults
0
> 0
>
Did you verify with running "mount" command that you actually have /proc/xen
mounted? Do you see other files under /proc/xen/ ?
What Xen hypervisor and tools version you have?
-- Pasi
[-- Attachment #1.2: Type: text/html, Size: 4559 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-23 9:12 ` Teo En Ming
2009-07-23 10:02 ` Teo En Ming
@ 2009-07-23 10:09 ` Pasi Kärkkäinen
2009-07-23 10:06 ` Teo En Ming
1 sibling, 1 reply; 86+ messages in thread
From: Pasi Kärkkäinen @ 2009-07-23 10:09 UTC (permalink / raw)
To: Teo En Ming; +Cc: xen-devel, jeremy.fitzhardinge
On Thu, Jul 23, 2009 at 05:12:56PM +0800, Teo En Ming wrote:
> Hi,
>
> I have successfully booted up the pvops enabled Xen Dom 0 kernel but it
> seems I cannot start the xend daemon.
>
> It complains:
>
> grep: /proc/xen/capabilities: No such file or directory
>
> My /etc/fstab is as follows:
>
> /dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part1 swap swap
> defaults 0 0
> /dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part2 / ext3
> acl,user_xattr 1 1
> /dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part3 /home ext3
> acl,user_xattr 1 2
> proc /proc proc defaults 0
> 0
> sysfs /sys sysfs noauto 0
> 0
> debugfs /sys/kernel/debug debugfs noauto 0
> 0
> devpts /dev/pts devpts mode=0620,gid=5 0
> 0
> none /proc/xen xenfs defaults 0
> 0
>
Did you verify with running "mount" command that you actually have /proc/xen
mounted? Do you see other files under /proc/xen/ ?
What Xen hypervisor and tools version you have?
-- Pasi
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-23 10:06 ` Teo En Ming
@ 2009-07-23 10:19 ` Pasi Kärkkäinen
2009-07-23 10:25 ` Teo En Ming
0 siblings, 1 reply; 86+ messages in thread
From: Pasi Kärkkäinen @ 2009-07-23 10:19 UTC (permalink / raw)
To: Teo En Ming; +Cc: xen-devel, jeremy.fitzhardinge
On Thu, Jul 23, 2009 at 06:06:17PM +0800, Teo En Ming wrote:
> Dear Pasi,
>
> I ran the mount command without arguments and I got the following:
>
> /dev/sda2 on / type ext3 (rw,acl,user_xattr)
> /proc on /proc type proc (rw)
> sysfs on /sys type sysfs (rw)
> debugfs on /sys/kernel/debug type debugfs (rw)
> udev on /dev type tmpfs (rw)
> devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
> /dev/sda3 on /home type ext3 (rw,acl,user_xattr)
> fusectl on /sys/fs/fuse/connections type fusectl (rw)
> none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
> gvfs-fuse-daemon on /home/enming/.gvfs type fuse.gvfs-fuse-daemon
> (rw,nosuid,nodev,user=enming)
>
> Apparently /proc/xen is not mounted. Sob sob sob.
>
So what does "mount /proc/xen" say ?
And what's your Xen version?
-- Pasi
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-23 10:19 ` Pasi Kärkkäinen
@ 2009-07-23 10:25 ` Teo En Ming
2009-07-23 10:30 ` Teo En Ming
2009-07-23 10:41 ` Pasi Kärkkäinen
0 siblings, 2 replies; 86+ messages in thread
From: Teo En Ming @ 2009-07-23 10:25 UTC (permalink / raw)
To: Pasi Kärkkäinen; +Cc: xen-devel, jeremy.fitzhardinge
[-- Attachment #1.1: Type: text/plain, Size: 3631 bytes --]
Dear Pasi,
I ran "mount /proc/xen" manually *after* the system booted up, it read
/etc/fstab, and mounted /proc/xen successfully!!!
Please see the last line of the following "mount" output:
/dev/sda2 on / type ext3 (rw,acl,user_xattr)
/proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda3 on /home type ext3 (rw,acl,user_xattr)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
gvfs-fuse-daemon on /home/enming/.gvfs type fuse.gvfs-fuse-daemon
(rw,nosuid,nodev,user=enming)
none on /proc/xen type xenfs (rw)
It is very strange that the system did not mount /proc/xen automatically as
indicated in /etc/fstab during bootup.
Now I am able to start xend daemon. Please see
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
And I can see domain 0 using the "xm list" command already!
Any ideas how to make /proc/xen automatically mounted while booting? I
thought I already have the xenfs entry in /etc/fstab.
/dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part1 swap swap
defaults 0 0
/dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part2 / ext3
acl,user_xattr 1 1
/dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part3 /home ext3
acl,user_xattr 1 2
proc /proc proc defaults 0
0
sysfs /sys sysfs noauto 0
0
debugfs /sys/kernel/debug debugfs noauto 0
0
devpts /dev/pts devpts mode=0620,gid=5 0
0
none /proc/xen xenfs defaults 0
0
Seems the initscripts did not attempt to mount /proc/xen during system
startup.
Or should I put "mount /proc/xen" in /etc/rc.local?
Thank you!!!
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming <enming.teo@asiasoftsea.net>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Thu, 23 Jul 2009 13:19:44 +0300
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Thu, Jul 23, 2009 at 06:06:17PM +0800, Teo En Ming wrote:
> Dear Pasi,
>
> I ran the mount command without arguments and I got the following:
>
> /dev/sda2 on / type ext3 (rw,acl,user_xattr)
> /proc on /proc type proc (rw)
> sysfs on /sys type sysfs (rw)
> debugfs on /sys/kernel/debug type debugfs (rw)
> udev on /dev type tmpfs (rw)
> devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
> /dev/sda3 on /home type ext3 (rw,acl,user_xattr)
> fusectl on /sys/fs/fuse/connections type fusectl (rw)
> none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
> gvfs-fuse-daemon on /home/enming/.gvfs type fuse.gvfs-fuse-daemon
> (rw,nosuid,nodev,user=enming)
>
> Apparently /proc/xen is not mounted. Sob sob sob.
>
So what does "mount /proc/xen" say ?
And what's your Xen version?
-- Pasi
[-- Attachment #1.2: Type: text/html, Size: 6514 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-23 10:25 ` Teo En Ming
@ 2009-07-23 10:30 ` Teo En Ming
2009-07-23 10:41 ` Pasi Kärkkäinen
1 sibling, 0 replies; 86+ messages in thread
From: Teo En Ming @ 2009-07-23 10:30 UTC (permalink / raw)
To: Teo En Ming, Pasi Kärkkäinen; +Cc: xen-devel, jeremy.fitzhardinge
[-- Attachment #1.1: Type: text/plain, Size: 4860 bytes --]
Dear Pasi,
I am using Xen 3.4 testing branch from the xensource.com mercurial.
Sorry I used /etc/rc.local. It is a mistake. Fedora and Red Hat Linux uses
/etc/rc.local. But in OpenSUSE it uses /etc/init.d/boot.local
Thank you!!!
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Thu, 23 Jul 2009 18:25:33 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Dear Pasi,
I ran "mount /proc/xen" manually *after* the system booted up, it read
/etc/fstab, and mounted /proc/xen successfully!!!
Please see the last line of the following "mount" output:
/dev/sda2 on / type ext3 (rw,acl,user_xattr)
/proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda3 on /home type ext3 (rw,acl,user_xattr)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
gvfs-fuse-daemon on /home/enming/.gvfs type fuse.gvfs-fuse-daemon
(rw,nosuid,nodev,user=enming)
none on /proc/xen type xenfs (rw)
It is very strange that the system did not mount /proc/xen
automatically as indicated in /etc/fstab during bootup.
Now I am able to start xend daemon. Please see
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
And I can see domain 0 using the "xm list" command already!
Any ideas how to make /proc/xen automatically mounted while booting? I
thought I already have the xenfs entry in /etc/fstab.
/dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part1
swap
swap
defaults
0 0
/dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part2
/
ext3
acl,user_xattr 1 1
/dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part3
/home
ext3
acl,user_xattr 1 2
proc
/proc
proc
defaults
0 0
sysfs
/sys
sysfs
noauto
0 0
debugfs
/sys/kernel/debug debugfs
noauto
0 0
devpts
/dev/pts
devpts
mode=0620,gid=5 0 0
none
/proc/xen
xenfs
defaults
0 0
Seems the initscripts did not attempt to mount /proc/xen during system
startup.
Or should I put "mount /proc/xen" in /etc/rc.local?
Thank you!!!
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming <enming.teo@asiasoftsea.net>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Thu, 23 Jul 2009 13:19:44 +0300
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
On Thu, Jul 23,
2009 at 06:06:17PM +0800, Teo En Ming wrote:
> Dear Pasi,
>
> I ran the mount command without arguments and I got the
following:
>
> /dev/sda2 on / type ext3 (rw,acl,user_xattr)
> /proc on /proc type proc (rw)
> sysfs on /sys type sysfs (rw)
> debugfs on /sys/kernel/debug type debugfs (rw)
> udev on /dev type tmpfs (rw)
> devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
> /dev/sda3 on /home type ext3 (rw,acl,user_xattr)
> fusectl on /sys/fs/fuse/connections type fusectl (rw)
> none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
> gvfs-fuse-daemon on /home/enming/.gvfs type
fuse.gvfs-fuse-daemon
> (rw,nosuid,nodev,user=enming)
>
> Apparently /proc/xen is not mounted. Sob sob sob.
>
So what does "mount /proc/xen" say ?
And what's your Xen version?
-- Pasi
[-- Attachment #1.2: Type: text/html, Size: 8150 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-23 10:25 ` Teo En Ming
2009-07-23 10:30 ` Teo En Ming
@ 2009-07-23 10:41 ` Pasi Kärkkäinen
2009-07-23 11:52 ` Teo En Ming
1 sibling, 1 reply; 86+ messages in thread
From: Pasi Kärkkäinen @ 2009-07-23 10:41 UTC (permalink / raw)
To: Teo En Ming; +Cc: xen-devel, jeremy.fitzhardinge
On Thu, Jul 23, 2009 at 06:25:33PM +0800, Teo En Ming wrote:
> Dear Pasi,
>
> I ran "mount /proc/xen" manually *after* the system booted up, it read
> /etc/fstab, and mounted /proc/xen successfully!!!
>
> Please see the last line of the following "mount" output:
>
> /dev/sda2 on / type ext3 (rw,acl,user_xattr)
> /proc on /proc type proc (rw)
> sysfs on /sys type sysfs (rw)
> debugfs on /sys/kernel/debug type debugfs (rw)
> udev on /dev type tmpfs (rw)
> devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
> /dev/sda3 on /home type ext3 (rw,acl,user_xattr)
> fusectl on /sys/fs/fuse/connections type fusectl (rw)
> none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
> gvfs-fuse-daemon on /home/enming/.gvfs type fuse.gvfs-fuse-daemon
> (rw,nosuid,nodev,user=enming)
> none on /proc/xen type xenfs (rw)
>
Yep, now it's mounted :)
> It is very strange that the system did not mount /proc/xen automatically as
> indicated in /etc/fstab during bootup.
>
Indeed.
> Now I am able to start xend daemon. Please see
> http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
>
> And I can see domain 0 using the "xm list" command already!
>
Congrats! :)
> Any ideas how to make /proc/xen automatically mounted while booting? I
> thought I already have the xenfs entry in /etc/fstab.
>
> /dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part1 swap swap
> defaults 0 0
> /dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part2 / ext3
> acl,user_xattr 1 1
> /dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part3 /home ext3
> acl,user_xattr 1 2
> proc /proc proc defaults 0
> 0
> sysfs /sys sysfs noauto 0
> 0
> debugfs /sys/kernel/debug debugfs noauto 0
> 0
> devpts /dev/pts devpts mode=0620,gid=5 0
> 0
> none /proc/xen xenfs defaults 0
> 0
>
> Seems the initscripts did not attempt to mount /proc/xen during system
> startup.
>
That's weird.. it should be mounted automatically when it's in fstab.
Maybe it's because sysfs /sys is 'noauto'? Try to change that to 'defaults'.
> Or should I put "mount /proc/xen" in /etc/rc.local?
>
That shouldn't be necessary.
-- Pasi
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-23 10:41 ` Pasi Kärkkäinen
@ 2009-07-23 11:52 ` Teo En Ming
2009-07-23 16:13 ` Teo En Ming
0 siblings, 1 reply; 86+ messages in thread
From: Teo En Ming @ 2009-07-23 11:52 UTC (permalink / raw)
To: Pasi Kärkkäinen; +Cc: xen-devel, jeremy.fitzhardinge
[-- Attachment #1.1: Type: text/plain, Size: 3878 bytes --]
Dear Pasi,
Thank you!!!
I am now creating a virtual harddisk for my Xen virtual machine. Creating a
146 GB virtual harddisk:
# dd if=/dev/zero of=/home/enming/ga-nfs.img bs=1M count=149504
I am going to run CentOS 4.7 32-bit linux on it!
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming <enming.teo@asiasoftsea.net>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Thu, 23 Jul 2009 13:41:28 +0300
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Thu, Jul 23, 2009 at 06:25:33PM +0800, Teo En Ming wrote:
> Dear Pasi,
>
> I ran "mount /proc/xen" manually *after* the system booted up, it read
> /etc/fstab, and mounted /proc/xen successfully!!!
>
> Please see the last line of the following "mount" output:
>
> /dev/sda2 on / type ext3 (rw,acl,user_xattr)
> /proc on /proc type proc (rw)
> sysfs on /sys type sysfs (rw)
> debugfs on /sys/kernel/debug type debugfs (rw)
> udev on /dev type tmpfs (rw)
> devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
> /dev/sda3 on /home type ext3 (rw,acl,user_xattr)
> fusectl on /sys/fs/fuse/connections type fusectl (rw)
> none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
> gvfs-fuse-daemon on /home/enming/.gvfs type fuse.gvfs-fuse-daemon
> (rw,nosuid,nodev,user=enming)
> none on /proc/xen type xenfs (rw)
>
Yep, now it's mounted :)
> It is very strange that the system did not mount /proc/xen automatically
as
> indicated in /etc/fstab during bootup.
>
Indeed.
> Now I am able to start xend daemon. Please see
>
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
[http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg]
>
> And I can see domain 0 using the "xm list" command already!
>
Congrats! :)
> Any ideas how to make /proc/xen automatically mounted while booting? I
> thought I already have the xenfs entry in /etc/fstab.
>
> /dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part1 swap swap
> defaults 0 0
> /dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part2 / ext3
> acl,user_xattr 1 1
> /dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part3 /home ext3
> acl,user_xattr 1 2
> proc /proc proc defaults
0
> 0
> sysfs /sys sysfs noauto
0
> 0
> debugfs /sys/kernel/debug debugfs noauto
0
> 0
> devpts /dev/pts devpts mode=0620,gid=5
0
> 0
> none /proc/xen xenfs defaults
0
> 0
>
> Seems the initscripts did not attempt to mount /proc/xen during system
> startup.
>
That's weird.. it should be mounted automatically when it's in fstab.
Maybe it's because sysfs /sys is 'noauto'? Try to change that to 'defaults'.
> Or should I put "mount /proc/xen" in /etc/rc.local?
>
That shouldn't be necessary.
-- Pasi
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 6183 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-23 11:52 ` Teo En Ming
@ 2009-07-23 16:13 ` Teo En Ming
2009-07-23 19:21 ` Pasi Kärkkäinen
0 siblings, 1 reply; 86+ messages in thread
From: Teo En Ming @ 2009-07-23 16:13 UTC (permalink / raw)
To: Teo En Ming, Pasi Kärkkäinen; +Cc: xen-devel, jeremy.fitzhardinge
[-- Attachment #1.1: Type: text/plain, Size: 5968 bytes --]
Hi!!!
I have managed to install CentOS 4.7 paravirtualized guest on Xen Dom 0
Jeremy Fitzhardinge's pv_ops kernel successfully. Please see screenshots
here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
However, after installation of CentOS 4.7 PV, I can't start the guest
domain.
I have tried to mount/access the CentOS 4.7 guest disk image file and found
out that xenU (xen-aware) kernel and initial ramdisk images were installed.
PV Guest GRUB was also configured to boot the xenU kernel. Please see
screenshot:
http://1.bp.blogspot.com/_zzjv8MCM2sk/SmiMcYsFzAI/AAAAAAAAACk/rYxOFDHuD00/s1600-h/xen18.jpeg
My CentOS 4.7 PV guest domain configuration is as follows:
http://3.bp.blogspot.com/_zzjv8MCM2sk/SmiMcrnOfEI/AAAAAAAAACs/s-xguFnf25U/s1600-h/xen19.jpeg
Any idea why I can't start the CentOS 4.7 PV guest after installation? Is
the guest domain configuration correct/sufficient? Please advise.
Thank you!!!
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Thu, 23 Jul 2009 19:52:23 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Dear Pasi,
Thank you!!!
I am now creating a virtual harddisk for my Xen virtual machine.
Creating a 146 GB virtual harddisk:
# dd if=/dev/zero of=/home/enming/ga-nfs.img bs=1M count=149504
I am going to run CentOS 4.7 32-bit linux on it!
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming <enming.teo@asiasoftsea.net>
Cc: xen-devel@lists.xensource.com, jeremy.fitzhardinge@citrix.com
Date: Thu, 23 Jul 2009 13:41:28 +0300
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
On Thu, Jul 23,
2009 at 06:25:33PM +0800, Teo En Ming wrote:
> Dear Pasi,
>
> I ran "mount /proc/xen" manually *after* the system booted
up, it read
> /etc/fstab, and mounted /proc/xen successfully!!!
>
> Please see the last line of the following "mount" output:
>
> /dev/sda2 on / type ext3 (rw,acl,user_xattr)
> /proc on /proc type proc (rw)
> sysfs on /sys type sysfs (rw)
> debugfs on /sys/kernel/debug type debugfs (rw)
> udev on /dev type tmpfs (rw)
> devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
> /dev/sda3 on /home type ext3 (rw,acl,user_xattr)
> fusectl on /sys/fs/fuse/connections type fusectl (rw)
> none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
> gvfs-fuse-daemon on /home/enming/.gvfs type
fuse.gvfs-fuse-daemon
> (rw,nosuid,nodev,user=enming)
> none on /proc/xen type xenfs (rw)
>
Yep, now it's mounted :)
> It is very strange that the system did not mount /proc/xen
automatically as
> indicated in /etc/fstab during bootup.
>
Indeed.
> Now I am able to start xend daemon. Please see
>
http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg
[http://2.bp.blogspot.com/_zzjv8MCM2sk/Smg7pKoH_JI/AAAAAAAAABU/TVkqEEyLzYQ/s1600-h/xen08.jpeg]
>
> And I can see domain 0 using the "xm list" command already!
>
Congrats! :)
> Any ideas how to make /proc/xen automatically mounted while
booting? I
> thought I already have the xenfs entry in /etc/fstab.
>
> /dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part1 swap
swap
> defaults
0 0
> /dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part2 /
ext3
> acl,user_xattr 1 1
> /dev/disk/by-id/ata-ST3320620AS_9QF97Q42-part3 /home
ext3
> acl,user_xattr 1 2
> proc
/proc proc
defaults 0
> 0
> sysfs
/sys sysfs
noauto
0
> 0
> debugfs
/sys/kernel/debug debugfs noauto
0
> 0
> devpts
/dev/pts devpts
mode=0620,gid=5 0
> 0
> none
/proc/xen xenfs
defaults 0
> 0
>
> Seems the initscripts did not attempt to mount /proc/xen
during system
> startup.
>
That's weird.. it should be mounted automatically when it's in
fstab.
Maybe it's because sysfs /sys is 'noauto'? Try to change that to
'defaults'.
> Or should I put "mount /proc/xen" in /etc/rc.local?
>
That shouldn't be necessary.
-- Pasi
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 8740 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-23 16:13 ` Teo En Ming
@ 2009-07-23 19:21 ` Pasi Kärkkäinen
0 siblings, 0 replies; 86+ messages in thread
From: Pasi Kärkkäinen @ 2009-07-23 19:21 UTC (permalink / raw)
To: Teo En Ming; +Cc: xen-devel, jeremy.fitzhardinge
On Fri, Jul 24, 2009 at 12:13:02AM +0800, Teo En Ming wrote:
> Hi!!!
>
> I have managed to install CentOS 4.7 paravirtualized guest on Xen Dom 0
> Jeremy Fitzhardinge's pv_ops kernel successfully. Please see screenshots
> here:
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
>
> However, after installation of CentOS 4.7 PV, I can't start the guest
> domain.
>
> I have tried to mount/access the CentOS 4.7 guest disk image file and found
> out that xenU (xen-aware) kernel and initial ramdisk images were installed.
> PV Guest GRUB was also configured to boot the xenU kernel. Please see
> screenshot:
> http://1.bp.blogspot.com/_zzjv8MCM2sk/SmiMcYsFzAI/AAAAAAAAACk/rYxOFDHuD00/s1600-h/xen18.jpeg
>
So it seems you have a separate /boot partition, which is the first partition on the
xvda disk.. that centos 4.7 domU grub.conf looks correct to me.
> My CentOS 4.7 PV guest domain configuration is as follows:
> http://3.bp.blogspot.com/_zzjv8MCM2sk/SmiMcrnOfEI/AAAAAAAAACs/s-xguFnf25U/s1600-h/xen19.jpeg
>
That looks correct aswell..
> Any idea why I can't start the CentOS 4.7 PV guest after installation? Is
> the guest domain configuration correct/sufficient? Please advise.
>
What's the error you get? Based on those screenshots it _should_ work..
-- Pasi
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-24 18:31 ` Teo En Ming
@ 2009-07-25 11:14 ` Mr. Teo En Ming (Zhang Enming)
0 siblings, 0 replies; 86+ messages in thread
From: Mr. Teo En Ming (Zhang Enming) @ 2009-07-25 11:14 UTC (permalink / raw)
To: enming.teo; +Cc: Sander Eikelenboom, Boris Derzhavets, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 21951 bytes --]
Dear All,
I am trying to install OpenSolaris 2009.06 32-bit paravirtualized guest
on OpenSUSE 11.1 32-bit paravirt-ops enabled Xen 3.4.1-rc8 Dom 0 Kernel
2.6.30-rc6.
However, I am getting an opensolaris console login prompt. There is no
GNOME DE for me to launch the GUI installer for OpenSolaris. I am using
the OpenSolaris LiveCD 32-bit.
I noticed under the guest domain configuration there is a parameter
called 'extra' kernel parameter. Does the 'nowin' argument stand for no
graphical windows?
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
Then I also get the "invalid disk device number (768)" error. Do I need
to use xvda instead of hda?
Thank you very much.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo En Ming wrote:
> As a matter of fact, our servers are either Dell PowerEdge 1950/2950
> and IBM xSeries.
>
> I am just testing it out on our lab PC first.
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
> Technical Support Engineer
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Republic of Singapore
> Mobile Phone: +65-9648-9798
> MSN: teoenming@hotmail.com
>
>
> -----Original Message-----
> From: "Teo En Ming" <enming.teo@asiasoftsea.net>
> To: "Boris Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
> <pasik@iki.fi>
> Cc: Sander Eikelenboom <linux@eikelenboom.it>,
> xen-devel@lists.xensource.com
> Date: Sat, 25 Jul 2009 02:27:02 +0800
> Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
> Jeremy's PVOPS Kernel
>
> Dear Boris,
>
> My next step will be a 64-bit Xen Dom 0 host.
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
> Technical Support Engineer
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Republic of Singapore
> Mobile Phone: +65-9648-9798
> MSN: teoenming@hotmail.com
>
>
> -----Original Message-----
> From: Boris Derzhavets <bderzhavets@yahoo.com>
> To: Pasi Kärkkäinen <pasik@iki.fi>, enming.teo@asiasoftsea.net
> Cc: Sander Eikelenboom <linux@eikelenboom.it>,
> xen-devel@lists.xensource.com
> Date: Fri, 24 Jul 2009 10:57:49 -0700 (PDT)
> Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0
> in Jeremy's PVOPS Kernel
>
> Teo, it is up to you how to manage, if you just having fun.
> Otherwise, downloading 64-bit OpenSuse 11.1 ISO image
> takes just 12-14 hr even at slow ADSL speed ( like 100 KB/sec).
> Install takes 30 minutes and brings you to the trusted
> results, instead
> of wasting a lot of time in case of business environment
> assignment.
> Pasi has 32-bit experience due to hardware limitations, which
> you don't
> have.
>
> Boris.
>
> --- On *Fri, 7/24/09, Teo En Ming /
> <enming.teo@asiasoftsea.net>/* wrote:
>
>
> From: Teo En Ming <enming.teo@asiasoftsea.net>
> Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen
> Dom 0 in Jeremy's PVOPS Kernel
> To: "Boris Derzhavets" <bderzhavets@yahoo.com>, "Pasi
> Kärkkäinen" <pasik@iki.fi>
> Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
> xen-devel@lists.xensource.com
> Date: Friday, July 24, 2009, 12:56 PM
>
> Dear Boris,
>
> My colleague installed OpenSUSE 11.1 32-bit on the Core 2
> Duo machine in our labs. Please see my earlier replies in
> the same topic.
>
> I was too lazy to reformat and install 64-bit OpenSUSE, so
> I proceeded with Xen Dom 0 pvops kernel compilation on
> 32-bit Linux host.
>
> I admit I am getting a lot of headache. Haha.
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
> Engineering) BEng(Hons)(Mechanical Engineering)
> Technical Support Engineer
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Republic of Singapore
> Mobile Phone: +65-9648-9798
> MSN: teoenming@hotmail.com
>
>
> -----Original Message-----
> From: Boris Derzhavets <bderzhavets@yahoo.com>
> To: enming.teo@asiasoftsea.net, Pasi Kärkkäinen
> <pasik@iki.fi>
> Cc: Sander Eikelenboom <linux@eikelenboom.it>,
> xen-devel@lists.xensource.com
> Date: Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
> Subject: Re: Re[8]: [Xen-devel] Unable to Configure
> Xen Dom 0 in Jeremy's PVOPS Kernel
>
> Once again, i don't see any reason to to run 32-bit OS
> on Core2Duo,
> unless you like Xen head ache. Core development
> (PVOPS) is obviously
> running in 64-bit environment.
>
> Boris.
>
> --- On *Fri, 7/24/09, Boris Derzhavets /
> <bderzhavets@yahoo.com>/* wrote:
>
>
> From: Boris Derzhavets <bderzhavets@yahoo.com>
> Subject: Re: Re[8]: [Xen-devel] Unable to
> Configure Xen Dom 0 in Jeremy's PVOPS Kernel
> To: enming.teo@asiasoftsea.net, "Pasi Kärkkäinen"
> <pasik@iki.fi>
> Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
> xen-devel@lists.xensource.com
> Date: Friday, July 24, 2009, 12:47 PM
>
> >After doing the above, I re-installed back the
> Xen hypervisor, libraries and tools, and also >the
> kernel, initrd, and modules. Then I proceeded to
> reboot my machine. After rebooting, > my CentOS
> 4.7 32-bit PV guest is still able to start and run!
>
> Why it wouldn't ? If your image stays the same.
>
> > I am still very puzzled! What causes the PV
> guest initially cannot start? Then what
> >subsequently causes the PV guest to suddenly be
> able to start and run???
>
>
> That is not supposed to happen. I would suggest
> clean OS (without any built in xen presence)
> install , followed by Xen 3.4.1+pvops kernel
> clean install.
>
> Boris.
>
> --- On *Fri, 7/24/09, Teo En Ming /
> <enming.teo@asiasoftsea.net>/* wrote:
>
>
> From: Teo En Ming <enming.teo@asiasoftsea.net>
> Subject: Re: Re[8]: [Xen-devel] Unable to
> Configure Xen Dom 0 in Jeremy's PVOPS Kernel
> To: "Teo En Ming"
> <enming.teo@asiasoftsea.net>, "Pasi
> Kärkkäinen" <pasik@iki.fi>
> Cc: "Sander Eikelenboom"
> <linux@eikelenboom.it>,
> xen-devel@lists.xensource.com
> Date: Friday, July 24, 2009, 12:19 PM
>
> Dear All,
>
> I am very puzzled. In investigating the cause
> of the sudden success of the CentOS 4.7 32-bit
> PV guest being able to run, I have uninstalled
> virt-manager and all of its dependencies:
>
> docbook
> python-gtk-vnc
> xen-libs 3.3.1
> scrollkeeper
> xen-tools 3.3.1
> libvirt 0.4.6
> libvirt-python
> vm-install 0.3.24
>
> Then I proceeded to "make uninstall" in
> xen-3.4-testing source tree, which also
> removed my self compiled Xen Dom 0 pvops
> enabled kernel, initrd and kernel modules.
>
> After doing the above, I re-installed back the
> Xen hypervisor, libraries and tools, and also
> the kernel, initrd, and modules. Then I
> proceeded to reboot my machine. After
> rebooting, my CentOS 4.7 32-bit PV guest is
> still able to start and run!
>
> I am still very puzzled! What causes the PV
> guest initially cannot start? Then what
> subsequently causes the PV guest to suddenly
> be able to start and run???
>
> ***scratches head***
>
> Anyway my CentOS 4.7 guest domain is now
> running. I shall now proceed to virtualize
> OpenSolaris 2009.06.
>
> Thank you.
>
> Also see screenshots of my CentOS 4.7 PV guest
> here:
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
>
>
> Mr. Teo En Ming (Zhang Enming)
> Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
> Technical Support Engineer
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Republic of Singapore
> Mobile Phone: +65-9648-9798
> MSN: teoenming@hotmail.com
>
>
> -----Original Message-----
> From: "Teo En Ming"
> <enming.teo@asiasoftsea.net>
> To: "Teo En Ming"
> <enming.teo@asiasoftsea.net>, "Pasi
> Kärkkäinen" <pasik@iki.fi>
> Cc: Sander Eikelenboom
> <linux@eikelenboom.it>,
> xen-devel@lists.xensource.com
> Date: Fri, 24 Jul 2009 22:54:26 +0800
> Subject: Re: Re[8]: [Xen-devel] Unable to
> Configure Xen Dom 0 in Jeremy's PVOPS Kernel
>
> Hi Pasi,
>
> It's very strange. Suddenly my CentOS 4.7
> 32-bit PV guest is able to start!!!
> Previously it refuses to start at all.
>
> I think I must have changed something in
> Dom 0 when I attempted "yast --install
> virt-manager". This action might have
> solved the problem. When I tried to
> install virt-manager, it also tries to
> install xen-libs-3.3.1 and xen-tools-3.3.1
> as dependencies. However, I started off my
> Xen Dom 0 pvops kernel install with Xen
> 3.4.1 rc8 branch.
>
> I need to investigate more why suddenly my
> CentOS 4.7 32-bit PV guest is able to start.
>
> Mr. Teo En Ming (Zhang Enming)
> Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
> Technical Support Engineer
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Republic of Singapore
> Mobile Phone: +65-9648-9798
> MSN: teoenming@hotmail.com
>
>
> -----Original Message-----
> From: "Teo En Ming"
> <enming.teo@asiasoftsea.net>
> To: "Pasi Kärkkäinen" <pasik@iki.fi>
> Cc: Sander Eikelenboom
> <linux@eikelenboom.it>,
> xen-devel@lists.xensource.com
> Date: Fri, 24 Jul 2009 21:54:00 +0800
> Subject: Re: Re[8]: [Xen-devel] Unable
> to Configure Xen Dom 0 in Jeremy's
> PVOPS Kernel
>
> Hi Pasi,
>
> I realized that Fedora 10 32-bit
> anaconda installer does not install
> PAE kernel after mounting the guest
> disk image file. I mounted the guest
> disk image file using losetup and
> kpartx which adds device nodes to
> /dev/mapper. I examined the /boot
> directory after mounting the guest
> disk image file and found no PAE
> vmlinuz and initrd.
>
> Still using the mounted Fedora 10
> 32-bit guest disk image file, I
> changed root to the guest disk
> filesystems and attempted to install
> the PAE kernel. Then I modified
> menu.lst to boot the PAE kernel. After
> modifying the grub configuration of
> the guest domain, I un-mounted the
> guest filesystem.
>
> I proceeded to boot the F10 32-bit
> guest, since I changed to PAE kernel.
> It is able to boot now (since the PAE
> kernel is xen-aware) but then it
> complains cannot mount /dev/root.
> Probably something to do with the PAE
> initrd file.
>
>
> Mr. Teo En Ming (Zhang Enming)
> Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
> Technical Support Engineer
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Republic of Singapore
> Mobile Phone: +65-9648-9798
> MSN: teoenming@hotmail.com
>
>
> -----Original Message-----
> From: Pasi Kärkkäinen <pasik@iki.fi>
> To: Teo En Ming
> <enming.teo@asiasoftsea.net>
> Cc: Sander Eikelenboom
> <linux@eikelenboom.it>,
> xen-devel@lists.xensource.com
> Date: Fri, 24 Jul 2009 16:31:19 +0300
> Subject: Re: Re[8]: [Xen-devel]
> Unable to Configure Xen Dom 0 in
> Jeremy's PVOPS Kernel
>
> On Fri, Jul 24, 2009 at 08:37:09PM
> +0800, Teo En Ming wrote:
> > Hi
> >
> > I attempted to install Fedora 10
> 32-bit PV guest using
> > images/pxeboot/vmlinuz-PAE and
> images/pxeboot/initrd-PAE.img from
> the F10
> > media. The non-PAE kernel could
> not load the installer. I finished
> my Fedora
> > 10 32-bit PV guest installation
> but it also cannot boot up after
> > installation, same as the CentOS
> 4.7 PV guest installation.
> >
>
> Fedora 10 installer has a bug, as
> a default it installs non-PAE
> kernel for
> xen domU. You need to use a
> kickstart script (like this) to
> fix it:
> http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
>
>
> The important lines being:
>
> -kernel
> kernel-PAE
>
> (Fedora 10 and Fedora 11 default
> kernels are compiled with pv_ops
> Xen domU
> support enabled, so there's no
> need for separate kernel-xen with
> these distros).
>
> Fedora 11 doesn't have that
> installer bug, so it installs right
> out-of-the-box as Xen domU.
>
> What's the error you get when you
> start the guest after installation?
> Please paste the "xm log" as text.
>
> I don't have any problems with
> CentOS 5.3 dom0.
>
> -- Pasi
>
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
>
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
>
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> </mc/compose?to=Xen-devel@lists.xensource.com>
> http://lists.xensource.com/xen-devel
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
[-- Attachment #1.2: Type: text/html, Size: 28450 bytes --]
[-- Attachment #2.1: "AVG certification" --]
[-- Type: text/plain, Size: 159 bytes --]
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date: 07/25/09 01:48:00
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-25 11:45 Boris Derzhavets
2009-07-25 16:32 ` Mr. Teo En Ming (Zhang Enming)
0 siblings, 1 reply; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-25 11:45 UTC (permalink / raw)
To: enming.teo; +Cc: =?ISO-8859-1?Q?Pasi_K=E4r?=, Sander Eikelenboom, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 21212 bytes --]
>I noticed under the guest domain configuration there is a parameter
called >'extra' kernel parameter. Does the 'nowin' argument stand for no
>graphical windows?
Login as jack/jack to text console.
Wait until :-
$ pfexec ifconfig -a
will show up your IPv4 address
$ mkdir .vnc
$ cp .Xclients .vnc/xstartup
$ vncserver
Connect via vncviewer IP-DomU:1 from another terminal session to OSOL DomU. In case OSOL installer will fail to obtain IP via DHCPDISCOVER,
let me know. It might happen and requires Solaris Kernel Model Debugger
to disable checksum offloading at boot up. Seems to be hardware dependent issue for OSOL 2009.06
**********************************
Copy ramdisk and kernel to Dom0
**********************************
[root@ServerXen isos]# cat copy.sh
mount -o loop,ro osol-0906-x86.iso /mnt
cp /mnt/boot/amd64/x86.microroot /home/boris/solaris
cp /mnt/platform/i86xpv/kernel/amd64/unix /home/boris/solaris
***********************
Installation profile:-
***********************
[root@ServerXen solaris]# cat osol200906.install
name = "sol0906"
vcpus = 1
memory = "1024"
kernel = "/home/boris/solaris/unix"
ramdisk = "/home/boris/solaris/x86.microroot"
extra = "/platform/i86xpv/kernel/amd64/unix - nowin -B install_media=cdrom"
disk = ['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
# Would work as well
#
disk = ['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']
vif = ['bridge=eth1']
on_shutdown = "destroy"
on_reboot = "destroy"
on_crash = "destroy"
Boris
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net> wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, "Boris Derzhavets" <bderzhavets@yahoo.com>, xen-devel@lists.xensource.com, =?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
Date: Saturday, July 25, 2009, 7:14 AM
Dear All,
I am trying to install OpenSolaris 2009.06 32-bit paravirtualized guest
on OpenSUSE 11.1 32-bit paravirt-ops enabled Xen 3.4.1-rc8 Dom 0 Kernel
2.6.30-rc6.
However, I am getting an opensolaris console login prompt. There is no
GNOME DE for me to launch the GUI installer for OpenSolaris. I am using
the OpenSolaris LiveCD 32-bit.
I noticed under the guest domain configuration there is a parameter
called 'extra' kernel parameter. Does the 'nowin' argument stand for no
graphical windows?
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
Then I also get the "invalid disk device number (768)" error. Do I need
to use xvda instead of hda?
Thank you very much.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo En Ming wrote:
As a matter of fact, our servers are either Dell PowerEdge
1950/2950 and IBM xSeries.
I am just testing it out on our lab PC first.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Boris Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Sat, 25 Jul 2009 02:27:02 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Dear Boris,
My next step will be a 64-bit Xen Dom 0 host.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: Pasi Kärkkäinen <pasik@iki.fi>, enming.teo@asiasoftsea.net
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 10:57:49 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Teo, it is up to you how to manage, if you just having
fun.
Otherwise, downloading 64-bit OpenSuse 11.1 ISO image
takes just 12-14 hr even at slow ADSL speed ( like 100 KB/sec).
Install takes 30 minutes and brings you to the trusted results, instead
of wasting a lot of time in case of business environment assignment.
Pasi has 32-bit experience due to hardware limitations, which you don't
have.
Boris.
--- On Fri, 7/24/09, Teo En Ming
<enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:56 PM
Dear Boris,
My colleague installed OpenSUSE 11.1 32-bit on the
Core 2 Duo machine in our labs. Please see my earlier replies in the
same topic.
I was too lazy to reformat and install 64-bit
OpenSUSE, so I proceeded with Xen Dom 0 pvops kernel compilation on
32-bit Linux host.
I admit I am getting a lot of headache. Haha.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: enming.teo@asiasoftsea.net, Pasi Kärkkäinen <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Once again, i don't see any reason to to run 32-bit OS on
Core2Duo,
unless you like Xen head ache. Core development (PVOPS) is obviously
running in 64-bit environment.
Boris.
--- On Fri, 7/24/09, Boris Derzhavets
<bderzhavets@yahoo.com> wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net, "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:47 PM
>After doing the
above, I re-installed back the Xen hypervisor, libraries and tools, and
also >the kernel, initrd, and modules. Then I proceeded to reboot my
machine. After rebooting, > my CentOS 4.7 32-bit PV guest is still
able to start and run!
Why it wouldn't ? If your image stays the same.
> I am still very puzzled! What
causes the PV guest initially cannot start? Then what >subsequently
causes the PV guest to suddenly be able to start and run???
That is not supposed to happen. I would suggest clean OS (without any
built in xen presence) install , followed by Xen 3.4.1+pvops kernel
clean install.
Boris.
--- On Fri, 7/24/09, Teo En Ming
<enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Teo En Ming" <enming.teo@asiasoftsea.net>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:19 PM
Dear All,
I am very puzzled. In
investigating the cause of the sudden success of the CentOS 4.7 32-bit
PV guest being able to run, I have uninstalled virt-manager and all of
its dependencies:
docbook
python-gtk-vnc
xen-libs 3.3.1
scrollkeeper
xen-tools 3.3.1
libvirt 0.4.6
libvirt-python
vm-install 0.3.24
Then I proceeded to "make
uninstall" in xen-3.4-testing source tree, which also removed my self
compiled Xen Dom 0 pvops enabled kernel, initrd and kernel modules.
After doing the above, I
re-installed back the Xen hypervisor, libraries and tools, and also the
kernel, initrd, and modules. Then I proceeded to reboot my machine.
After rebooting, my CentOS 4.7 32-bit PV guest is still able to start
and run!
I am still very puzzled! What
causes the PV guest initially cannot start? Then what subsequently
causes the PV guest to suddenly be able to start and run???
***scratches head***
Anyway my CentOS 4.7 guest domain
is now running. I shall now proceed to virtualize OpenSolaris 2009.06.
Thank you.
Also see screenshots of my CentOS
4.7 PV guest here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Teo En Ming" <enming.teo@asiasoftsea.net>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 22:54:26 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Hi Pasi,
It's very strange. Suddenly my
CentOS 4.7 32-bit PV guest is able to start!!! Previously it refuses to
start at all.
I think I must have changed
something in Dom 0 when I attempted "yast --install virt-manager". This
action might have solved the problem. When I tried to install
virt-manager, it also tries to install xen-libs-3.3.1 and
xen-tools-3.3.1 as dependencies. However, I started off my Xen Dom 0
pvops kernel install with Xen 3.4.1 rc8 branch.
I need to investigate more why
suddenly my CentOS 4.7 32-bit PV guest is able to start.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 21:54:00 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Hi Pasi,
I realized that Fedora 10
32-bit anaconda installer does not install PAE kernel after mounting
the guest disk image file. I mounted the guest disk image file using
losetup and kpartx which adds device nodes to /dev/mapper. I examined
the /boot directory after mounting the guest disk image file and found
no PAE vmlinuz and initrd.
Still using the mounted Fedora
10 32-bit guest disk image file, I changed root to the guest disk
filesystems and attempted to install the PAE kernel. Then I modified
menu.lst to boot the PAE kernel. After modifying the grub configuration
of the guest domain, I un-mounted the guest filesystem.
I proceeded to boot the F10
32-bit guest, since I changed to PAE kernel. It is able to boot now
(since the PAE kernel is xen-aware) but then it complains cannot mount
/dev/root. Probably something to do with the PAE initrd file.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming <enming.teo@asiasoftsea.net>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 16:31:19 +0300
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
On Fri, Jul 24,
2009 at 08:37:09PM +0800, Teo En Ming wrote:
> Hi
>
> I attempted to install Fedora 10 32-bit PV guest using
> images/pxeboot/vmlinuz-PAE and images/pxeboot/initrd-PAE.img from
the F10
> media. The non-PAE kernel could not load the installer. I finished
my Fedora
> 10 32-bit PV guest installation but it also cannot boot up after
> installation, same as the CentOS 4.7 PV guest installation.
>
Fedora 10 installer has a bug, as a default it installs non-PAE kernel
for
xen domU. You need to use a kickstart script (like this) to fix it:
http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
The important lines being:
-kernel
kernel-PAE
(Fedora 10 and Fedora 11 default kernels are compiled with pv_ops Xen
domU
support enabled, so there's no need for separate kernel-xen with these
distros).
Fedora 11 doesn't have that installer bug, so it installs right
out-of-the-box as Xen domU.
What's the error you get when you start the guest after installation?
Please paste the "xm log" as text.
I don't have any problems with CentOS 5.3 dom0.
-- Pasi
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 35974 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-25 11:45 Boris Derzhavets
@ 2009-07-25 16:32 ` Mr. Teo En Ming (Zhang Enming)
0 siblings, 0 replies; 86+ messages in thread
From: Mr. Teo En Ming (Zhang Enming) @ 2009-07-25 16:32 UTC (permalink / raw)
To: bderzhavets; +Cc: Sander Eikelenboom, "Pasi Kr", xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 28564 bytes --]
Dear Boris,
This means I have to install a DHCP server or dnsmasq in my Dom 0,
listening on my Dom 0's IP address, so that it can assign dynamic IP
addresses to the DomU.
By the way, are there any paravirtualized device drivers that I can
install in DomU to improve the performance of the virtual machine?
Thank you.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
> >I noticed under the guest domain configuration there is a parameter
> called >'extra' kernel parameter. Does the 'nowin' argument stand for
> no >graphical windows?
>
> Login as jack/jack to text console.
>
> Wait until :-
>
> $ pfexec ifconfig -a
>
> will show up your IPv4 address
>
> $ mkdir .vnc
> $ cp .Xclients .vnc/xstartup
> $ vncserver
>
> Connect via vncviewer IP-DomU:1 from another terminal session to OSOL
> DomU. In case OSOL installer will fail to obtain IP via DHCPDISCOVER,
> let me know. It might happen and requires Solaris Kernel Model Debugger
> to disable checksum offloading at boot up. Seems to be hardware
> dependent issue for OSOL 2009.06
>
> **********************************
> Copy ramdisk and kernel to Dom0
> **********************************
> |
> [root@ServerXen isos]# cat copy.sh
> mount -o loop,ro osol-0906-x86.iso /mnt
> cp /mnt/boot/amd64/x86.microroot /home/boris/solaris
> cp /mnt/platform/i86xpv/kernel/amd64/unix /home/boris/solaris
> |
>
>
> ***********************
> Installation profile:-
> ***********************
> |
> [root@ServerXen solaris]# cat osol200906.install
> name = "sol0906"
> vcpus = 1
> memory = "1024"
> kernel = "/home/boris/solaris/unix"
> ramdisk = "/home/boris/solaris/x86.microroot"
> extra = "/platform/i86xpv/kernel/amd64/unix - nowin -B
> install_media=cdrom"
> disk = ['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
> # Would work as well
> # || disk = ['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']|
> |vif = ['bridge=eth1']
> on_shutdown = "destroy"
> on_reboot = "destroy"
> on_crash = "destroy"|
>
> Boris
>
> --- On *Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
> /<enming.teo@asiasoftsea.net>/* wrote:
>
>
> From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> PVOPS Kernel
> To: enming.teo@asiasoftsea.net
> Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, "Boris
> Derzhavets" <bderzhavets@yahoo.com>,
> xen-devel@lists.xensource.com, =?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
> Date: Saturday, July 25, 2009, 7:14 AM
>
> Dear All,
>
> I am trying to install OpenSolaris 2009.06 32-bit paravirtualized
> guest on OpenSUSE 11.1 32-bit paravirt-ops enabled Xen 3.4.1-rc8
> Dom 0 Kernel 2.6.30-rc6.
>
> However, I am getting an opensolaris console login prompt. There
> is no GNOME DE for me to launch the GUI installer for OpenSolaris.
> I am using the OpenSolaris LiveCD 32-bit.
>
> I noticed under the guest domain configuration there is a
> parameter called 'extra' kernel parameter. Does the 'nowin'
> argument stand for no graphical windows?
>
> http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
>
> http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
>
> http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
>
> Then I also get the "invalid disk device number (768)" error. Do I
> need to use xvda instead of hda?
>
> Thank you very much.
>
> --
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
> Technical Support Engineer
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Republic of Singapore
> Mobile Phone: +65-9648-9798
> MSN: teoenming@hotmail.com
>
>
>
> Teo En Ming wrote:
>> As a matter of fact, our servers are either Dell PowerEdge
>> 1950/2950 and IBM xSeries.
>>
>> I am just testing it out on our lab PC first.
>>
>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>> BEng(Hons)(Mechanical Engineering)
>> Technical Support Engineer
>> Information Technology Department
>> Asiasoft Online Pte Ltd
>> Tampines Central 1 #04-01 Tampines Plaza
>> Singapore 529541
>> Republic of Singapore
>> Mobile Phone: +65-9648-9798
>> MSN: teoenming@hotmail.com
>>
>>
>> -----Original Message-----
>> From: "Teo En Ming" <enming.teo@asiasoftsea.net>
>> To: "Boris Derzhavets" <bderzhavets@yahoo.com>, "Pasi
>> Kärkkäinen" <pasik@iki.fi>
>> Cc: Sander Eikelenboom <linux@eikelenboom.it>,
>> xen-devel@lists.xensource.com
>> Date: Sat, 25 Jul 2009 02:27:02 +0800
>> Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0
>> in Jeremy's PVOPS Kernel
>>
>> Dear Boris,
>>
>> My next step will be a 64-bit Xen Dom 0 host.
>>
>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>> BEng(Hons)(Mechanical Engineering)
>> Technical Support Engineer
>> Information Technology Department
>> Asiasoft Online Pte Ltd
>> Tampines Central 1 #04-01 Tampines Plaza
>> Singapore 529541
>> Republic of Singapore
>> Mobile Phone: +65-9648-9798
>> MSN: teoenming@hotmail.com
>>
>>
>> -----Original Message-----
>> From: Boris Derzhavets <bderzhavets@yahoo.com>
>> To: Pasi Kärkkäinen <pasik@iki.fi>,
>> enming.teo@asiasoftsea.net
>> Cc: Sander Eikelenboom <linux@eikelenboom.it>,
>> xen-devel@lists.xensource.com
>> Date: Fri, 24 Jul 2009 10:57:49 -0700 (PDT)
>> Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen
>> Dom 0 in Jeremy's PVOPS Kernel
>>
>> Teo, it is up to you how to manage, if you just having fun.
>> Otherwise, downloading 64-bit OpenSuse 11.1 ISO image
>> takes just 12-14 hr even at slow ADSL speed ( like 100
>> KB/sec).
>> Install takes 30 minutes and brings you to the trusted
>> results, instead
>> of wasting a lot of time in case of business environment
>> assignment.
>> Pasi has 32-bit experience due to hardware limitations,
>> which you don't
>> have.
>>
>> Boris.
>>
>> --- On *Fri, 7/24/09, Teo En Ming /
>> <enming.teo@asiasoftsea.net>/* wrote:
>>
>>
>> From: Teo En Ming <enming.teo@asiasoftsea.net>
>> Subject: Re: Re[8]: [Xen-devel] Unable to Configure
>> Xen Dom 0 in Jeremy's PVOPS Kernel
>> To: "Boris Derzhavets" <bderzhavets@yahoo.com>, "Pasi
>> Kärkkäinen" <pasik@iki.fi>
>> Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
>> xen-devel@lists.xensource.com
>> Date: Friday, July 24, 2009, 12:56 PM
>>
>> Dear Boris,
>>
>> My colleague installed OpenSUSE 11.1 32-bit on the
>> Core 2 Duo machine in our labs. Please see my earlier
>> replies in the same topic.
>>
>> I was too lazy to reformat and install 64-bit
>> OpenSUSE, so I proceeded with Xen Dom 0 pvops kernel
>> compilation on 32-bit Linux host.
>>
>> I admit I am getting a lot of headache. Haha.
>>
>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
>> Engineering) BEng(Hons)(Mechanical Engineering)
>> Technical Support Engineer
>> Information Technology Department
>> Asiasoft Online Pte Ltd
>> Tampines Central 1 #04-01 Tampines Plaza
>> Singapore 529541
>> Republic of Singapore
>> Mobile Phone: +65-9648-9798
>> MSN: teoenming@hotmail.com
>>
>>
>> -----Original Message-----
>> From: Boris Derzhavets <bderzhavets@yahoo.com>
>> To: enming.teo@asiasoftsea.net, Pasi Kärkkäinen
>> <pasik@iki.fi>
>> Cc: Sander Eikelenboom <linux@eikelenboom.it>,
>> xen-devel@lists.xensource.com
>> Date: Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
>> Subject: Re: Re[8]: [Xen-devel] Unable to
>> Configure Xen Dom 0 in Jeremy's PVOPS Kernel
>>
>> Once again, i don't see any reason to to run
>> 32-bit OS on Core2Duo,
>> unless you like Xen head ache. Core development
>> (PVOPS) is obviously
>> running in 64-bit environment.
>>
>> Boris.
>>
>> --- On *Fri, 7/24/09, Boris Derzhavets /
>> <bderzhavets@yahoo.com>/* wrote:
>>
>>
>> From: Boris Derzhavets <bderzhavets@yahoo.com>
>> Subject: Re: Re[8]: [Xen-devel] Unable to
>> Configure Xen Dom 0 in Jeremy's PVOPS Kernel
>> To: enming.teo@asiasoftsea.net, "Pasi
>> Kärkkäinen" <pasik@iki.fi>
>> Cc: "Sander Eikelenboom"
>> <linux@eikelenboom.it>,
>> xen-devel@lists.xensource.com
>> Date: Friday, July 24, 2009, 12:47 PM
>>
>> >After doing the above, I re-installed back
>> the Xen hypervisor, libraries and tools, and
>> also >the kernel, initrd, and modules. Then I
>> proceeded to reboot my machine. After
>> rebooting, > my CentOS 4.7 32-bit PV guest is
>> still able to start and run!
>>
>> Why it wouldn't ? If your image stays the same.
>>
>> > I am still very puzzled! What causes the PV
>> guest initially cannot start? Then what
>> >subsequently causes the PV guest to suddenly
>> be able to start and run???
>>
>>
>> That is not supposed to happen. I would
>> suggest clean OS (without any built in xen
>> presence) install , followed by Xen
>> 3.4.1+pvops kernel clean install.
>>
>> Boris.
>>
>> --- On *Fri, 7/24/09, Teo En Ming /
>> <enming.teo@asiasoftsea.net>/* wrote:
>>
>>
>> From: Teo En Ming
>> <enming.teo@asiasoftsea.net>
>> Subject: Re: Re[8]: [Xen-devel] Unable to
>> Configure Xen Dom 0 in Jeremy's PVOPS Kernel
>> To: "Teo En Ming"
>> <enming.teo@asiasoftsea.net>, "Pasi
>> Kärkkäinen" <pasik@iki.fi>
>> Cc: "Sander Eikelenboom"
>> <linux@eikelenboom.it>,
>> xen-devel@lists.xensource.com
>> Date: Friday, July 24, 2009, 12:19 PM
>>
>> Dear All,
>>
>> I am very puzzled. In investigating the
>> cause of the sudden success of the CentOS
>> 4.7 32-bit PV guest being able to run, I
>> have uninstalled virt-manager and all of
>> its dependencies:
>>
>> docbook
>> python-gtk-vnc
>> xen-libs 3.3.1
>> scrollkeeper
>> xen-tools 3.3.1
>> libvirt 0.4.6
>> libvirt-python
>> vm-install 0.3.24
>>
>> Then I proceeded to "make uninstall" in
>> xen-3.4-testing source tree, which also
>> removed my self compiled Xen Dom 0 pvops
>> enabled kernel, initrd and kernel modules.
>>
>> After doing the above, I re-installed
>> back the Xen hypervisor, libraries and
>> tools, and also the kernel, initrd, and
>> modules. Then I proceeded to reboot my
>> machine. After rebooting, my CentOS 4.7
>> 32-bit PV guest is still able to start
>> and run!
>>
>> I am still very puzzled! What causes the
>> PV guest initially cannot start? Then
>> what subsequently causes the PV guest to
>> suddenly be able to start and run???
>>
>> ***scratches head***
>>
>> Anyway my CentOS 4.7 guest domain is now
>> running. I shall now proceed to
>> virtualize OpenSolaris 2009.06.
>>
>> Thank you.
>>
>> Also see screenshots of my CentOS 4.7 PV
>> guest here:
>> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
>>
>>
>> Mr. Teo En Ming (Zhang Enming)
>> Dip(Mechatronics Engineering)
>> BEng(Hons)(Mechanical Engineering)
>> Technical Support Engineer
>> Information Technology Department
>> Asiasoft Online Pte Ltd
>> Tampines Central 1 #04-01 Tampines Plaza
>> Singapore 529541
>> Republic of Singapore
>> Mobile Phone: +65-9648-9798
>> MSN: teoenming@hotmail.com
>>
>>
>> -----Original Message-----
>> From: "Teo En Ming"
>> <enming.teo@asiasoftsea.net>
>> To: "Teo En Ming"
>> <enming.teo@asiasoftsea.net>, "Pasi
>> Kärkkäinen" <pasik@iki.fi>
>> Cc: Sander Eikelenboom
>> <linux@eikelenboom.it>,
>> xen-devel@lists.xensource.com
>> Date: Fri, 24 Jul 2009 22:54:26 +0800
>> Subject: Re: Re[8]: [Xen-devel]
>> Unable to Configure Xen Dom 0 in
>> Jeremy's PVOPS Kernel
>>
>> Hi Pasi,
>>
>> It's very strange. Suddenly my CentOS
>> 4.7 32-bit PV guest is able to
>> start!!! Previously it refuses to
>> start at all.
>>
>> I think I must have changed something
>> in Dom 0 when I attempted "yast
>> --install virt-manager". This action
>> might have solved the problem. When I
>> tried to install virt-manager, it
>> also tries to install xen-libs-3.3.1
>> and xen-tools-3.3.1 as dependencies.
>> However, I started off my Xen Dom 0
>> pvops kernel install with Xen 3.4.1
>> rc8 branch.
>>
>> I need to investigate more why
>> suddenly my CentOS 4.7 32-bit PV
>> guest is able to start.
>>
>> Mr. Teo En Ming (Zhang Enming)
>> Dip(Mechatronics Engineering)
>> BEng(Hons)(Mechanical Engineering)
>> Technical Support Engineer
>> Information Technology Department
>> Asiasoft Online Pte Ltd
>> Tampines Central 1 #04-01 Tampines Plaza
>> Singapore 529541
>> Republic of Singapore
>> Mobile Phone: +65-9648-9798
>> MSN: teoenming@hotmail.com
>>
>>
>> -----Original Message-----
>> From: "Teo En Ming"
>> <enming.teo@asiasoftsea.net>
>> To: "Pasi Kärkkäinen" <pasik@iki.fi>
>> Cc: Sander Eikelenboom
>> <linux@eikelenboom.it>,
>> xen-devel@lists.xensource.com
>> Date: Fri, 24 Jul 2009 21:54:00
>> +0800
>> Subject: Re: Re[8]: [Xen-devel]
>> Unable to Configure Xen Dom 0 in
>> Jeremy's PVOPS Kernel
>>
>> Hi Pasi,
>>
>> I realized that Fedora 10 32-bit
>> anaconda installer does not
>> install PAE kernel after mounting
>> the guest disk image file. I
>> mounted the guest disk image file
>> using losetup and kpartx which
>> adds device nodes to /dev/mapper.
>> I examined the /boot directory
>> after mounting the guest disk
>> image file and found no PAE
>> vmlinuz and initrd.
>>
>> Still using the mounted Fedora 10
>> 32-bit guest disk image file, I
>> changed root to the guest disk
>> filesystems and attempted to
>> install the PAE kernel. Then I
>> modified menu.lst to boot the PAE
>> kernel. After modifying the grub
>> configuration of the guest
>> domain, I un-mounted the guest
>> filesystem.
>>
>> I proceeded to boot the F10
>> 32-bit guest, since I changed to
>> PAE kernel. It is able to boot
>> now (since the PAE kernel is
>> xen-aware) but then it complains
>> cannot mount /dev/root. Probably
>> something to do with the PAE
>> initrd file.
>>
>>
>> Mr. Teo En Ming (Zhang Enming)
>> Dip(Mechatronics Engineering)
>> BEng(Hons)(Mechanical Engineering)
>> Technical Support Engineer
>> Information Technology Department
>> Asiasoft Online Pte Ltd
>> Tampines Central 1 #04-01
>> Tampines Plaza
>> Singapore 529541
>> Republic of Singapore
>> Mobile Phone: +65-9648-9798
>> MSN: teoenming@hotmail.com
>>
>>
>> -----Original Message-----
>> From: Pasi Kärkkäinen
>> <pasik@iki.fi>
>> To: Teo En Ming
>> <enming.teo@asiasoftsea.net>
>> Cc: Sander Eikelenboom
>> <linux@eikelenboom.it>,
>> xen-devel@lists.xensource.com
>> Date: Fri, 24 Jul 2009
>> 16:31:19 +0300
>> Subject: Re: Re[8]:
>> [Xen-devel] Unable to
>> Configure Xen Dom 0 in
>> Jeremy's PVOPS Kernel
>>
>> On Fri, Jul 24, 2009 at
>> 08:37:09PM +0800, Teo En Ming
>> wrote:
>> > Hi
>> >
>> > I attempted to install
>> Fedora 10 32-bit PV guest using
>> > images/pxeboot/vmlinuz-PAE
>> and
>> images/pxeboot/initrd-PAE.img
>> from the F10
>> > media. The non-PAE kernel
>> could not load the installer.
>> I finished my Fedora
>> > 10 32-bit PV guest
>> installation but it also
>> cannot boot up after
>> > installation, same as the
>> CentOS 4.7 PV guest
>> installation.
>> >
>>
>> Fedora 10 installer has a
>> bug, as a default it installs
>> non-PAE kernel for
>> xen domU. You need to use a
>> kickstart script (like this)
>> to fix it:
>> http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
>>
>>
>> The important lines being:
>>
>> -kernel
>> kernel-PAE
>>
>> (Fedora 10 and Fedora 11
>> default kernels are compiled
>> with pv_ops Xen domU
>> support enabled, so there's
>> no need for separate
>> kernel-xen with these distros).
>>
>> Fedora 11 doesn't have that
>> installer bug, so it installs
>> right
>> out-of-the-box as Xen domU.
>>
>> What's the error you get when
>> you start the guest after
>> installation?
>> Please paste the "xm log" as
>> text.
>>
>> I don't have any problems
>> with CentOS 5.3 dom0.
>>
>> -- Pasi
>>
>>
>> -----Inline Attachment Follows-----
>>
>> _______________________________________________
>>
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>>
>>
>> -----Inline Attachment Follows-----
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>>
>>
>> -----Inline Attachment Follows-----
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>
>
> -----Inline Attachment Follows-----
>
>
> No virus found in this outgoing message.
> Checked by AVG - www.avg.com
> Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date:
> 07/25/09 01:48:00
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> </mc/compose?to=Xen-devel@lists.xensource.com>
> http://lists.xensource.com/xen-devel
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
[-- Attachment #1.2: Type: text/html, Size: 43886 bytes --]
[-- Attachment #2.1: "AVG certification" --]
[-- Type: text/plain, Size: 159 bytes --]
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date: 07/25/09 01:48:00
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-25 17:24 Boris Derzhavets
2009-07-26 2:42 ` Mr. Teo En Ming (Zhang Enming)
0 siblings, 1 reply; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-25 17:24 UTC (permalink / raw)
To: enming.teo; +Cc: Sander Eikelenboom, "Pasi Kr", xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 28248 bytes --]
This means that OSOL installer (by default ) will issue DHCPDISCOVER via your Xen bridge, looking for DHCP server on your LAN. Only on RHEL 5.3
(F10 with Xen 3.3.1 src.rpm been installed along with generated packages) with libvirtd & dnsmasq up and running you can specify
vif=['bridge=virbr0' ] to detect DHCP Server at your Dom0.
View for instance :-
http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
I don't have any experience with OpenSuse 11.1 . I hardly remind they tried to reproduce RH's technology. Most probably they did it in SLES 11 (not sure). Check for libvirtd&dnsmasq daemons up and running.
But if your OpenSuse 11.1 Dom0 is on "dhcp" bridge itself , then no problems. Just vif=['bridge=eth0'].
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net> wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, Pasi Kr@yahoo.com, xen-devel@lists.xensource.com
Date: Saturday, July 25, 2009, 12:32 PM
Dear Boris,
This means I have to install a DHCP server or dnsmasq in my Dom 0,
listening on my Dom 0's IP address, so that it can assign dynamic IP
addresses to the DomU.
By the way, are there any paravirtualized device drivers that I can
install in DomU to improve the performance of the virtual machine?
Thank you.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
>I noticed under the guest domain configuration there
is a parameter
called >'extra' kernel parameter. Does the 'nowin' argument stand
for no
>graphical windows?
Login as jack/jack to text console.
Wait until :-
$ pfexec ifconfig -a
will show up your IPv4 address
$ mkdir .vnc
$ cp .Xclients .vnc/xstartup
$ vncserver
Connect via vncviewer IP-DomU:1 from another terminal session to OSOL
DomU. In case OSOL installer will fail to obtain IP via DHCPDISCOVER,
let me know. It might happen and requires Solaris Kernel Model Debugger
to disable checksum offloading at boot up. Seems to be hardware
dependent issue for OSOL 2009.06
**********************************
Copy ramdisk and kernel to Dom0
**********************************
[root@ServerXen isos]# cat copy.sh
mount -o loop,ro osol-0906-x86.iso /mnt
cp /mnt/boot/amd64/x86.microroot /home/boris/solaris
cp /mnt/platform/i86xpv/kernel/amd64/unix /home/boris/solaris
***********************
Installation profile:-
***********************
[root@ServerXen solaris]# cat osol200906.install
name = "sol0906"
vcpus = 1
memory = "1024"
kernel = "/home/boris/solaris/unix"
ramdisk = "/home/boris/solaris/x86.microroot"
extra = "/platform/i86xpv/kernel/amd64/unix - nowin -B
install_media=cdrom"
disk = ['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
# Would work as well
#
disk = ['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']
vif = ['bridge=eth1']
on_shutdown = "destroy"
on_reboot = "destroy"
on_crash = "destroy"
Boris
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, "Boris
Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com, =?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
Date: Saturday, July 25, 2009, 7:14 AM
Dear All,
I am trying to install OpenSolaris 2009.06 32-bit paravirtualized guest
on OpenSUSE 11.1 32-bit paravirt-ops enabled Xen 3.4.1-rc8 Dom 0 Kernel
2.6.30-rc6.
However, I am getting an opensolaris console login prompt. There is no
GNOME DE for me to launch the GUI installer for OpenSolaris. I am using
the OpenSolaris LiveCD 32-bit.
I noticed under the guest domain configuration there is a parameter
called 'extra' kernel parameter. Does the 'nowin' argument stand for no
graphical windows?
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
Then I also get the "invalid disk device number (768)" error. Do I need
to use xvda instead of hda?
Thank you very much.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo En Ming wrote:
As a matter of fact, our servers are either Dell
PowerEdge
1950/2950 and IBM xSeries.
I am just testing it out on our lab PC first.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
"Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Sat, 25 Jul 2009 02:27:02 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Dear Boris,
My next step will be a 64-bit Xen Dom 0 host.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: Pasi Kärkkäinen <pasik@iki.fi>,
enming.teo@asiasoftsea.net
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 10:57:49 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Teo, it is up to you how to manage, if you just having
fun.
Otherwise, downloading 64-bit OpenSuse 11.1 ISO image
takes just 12-14 hr even at slow ADSL speed ( like 100 KB/sec).
Install takes 30 minutes and brings you to the trusted results, instead
of wasting a lot of time in case of business environment assignment.
Pasi has 32-bit experience due to hardware limitations, which you don't
have.
Boris.
--- On Fri, 7/24/09, Teo En Ming
<enming.teo@asiasoftsea.net>
wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
"Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:56 PM
Dear Boris,
My colleague installed OpenSUSE 11.1
32-bit on the
Core 2 Duo machine in our labs. Please see my earlier replies in the
same topic.
I was too lazy to reformat and install
64-bit
OpenSUSE, so I proceeded with Xen Dom 0 pvops kernel compilation on
32-bit Linux host.
I admit I am getting a lot of headache.
Haha.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: enming.teo@asiasoftsea.net,
Pasi Kärkkäinen <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Once again, i don't see any reason to to run 32-bit OS on
Core2Duo,
unless you like Xen head ache. Core development (PVOPS) is obviously
running in 64-bit environment.
Boris.
--- On Fri, 7/24/09, Boris Derzhavets
<bderzhavets@yahoo.com>
wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:47 PM
>After doing the
above, I re-installed back the Xen hypervisor, libraries and tools, and
also >the kernel, initrd, and modules. Then I proceeded to reboot my
machine. After rebooting, > my CentOS 4.7 32-bit PV guest is still
able to start and run!
Why it wouldn't ? If your image stays the same.
> I am still very
puzzled! What
causes the PV guest initially cannot start? Then what >subsequently
causes the PV guest to suddenly be able to start and run???
That is not supposed to happen. I would suggest clean OS (without any
built in xen presence) install , followed by Xen 3.4.1+pvops kernel
clean install.
Boris.
--- On Fri, 7/24/09, Teo En Ming
<enming.teo@asiasoftsea.net>
wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Teo En Ming" <enming.teo@asiasoftsea.net>,
"Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:19 PM
Dear All,
I am very puzzled. In
investigating the cause of the sudden success of the CentOS 4.7 32-bit
PV guest being able to run, I have uninstalled virt-manager and all of
its dependencies:
docbook
python-gtk-vnc
xen-libs 3.3.1
scrollkeeper
xen-tools 3.3.1
libvirt 0.4.6
libvirt-python
vm-install 0.3.24
Then I proceeded to
"make
uninstall" in xen-3.4-testing source tree, which also removed my self
compiled Xen Dom 0 pvops enabled kernel, initrd and kernel modules.
After doing the above, I
re-installed back the Xen hypervisor, libraries and tools, and also the
kernel, initrd, and modules. Then I proceeded to reboot my machine.
After rebooting, my CentOS 4.7 32-bit PV guest is still able to start
and run!
I am still very puzzled!
What
causes the PV guest initially cannot start? Then what subsequently
causes the PV guest to suddenly be able to start and run???
***scratches head***
Anyway my CentOS 4.7
guest domain
is now running. I shall now proceed to virtualize OpenSolaris 2009.06.
Thank you.
Also see screenshots of
my CentOS
4.7 PV guest here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
Mr. Teo En Ming (Zhang
Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support
Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Teo En Ming" <enming.teo@asiasoftsea.net>,
"Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 22:54:26 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Hi Pasi,
It's very strange.
Suddenly my
CentOS 4.7 32-bit PV guest is able to start!!! Previously it refuses to
start at all.
I think I must have
changed
something in Dom 0 when I attempted "yast --install virt-manager". This
action might have solved the problem. When I tried to install
virt-manager, it also tries to install xen-libs-3.3.1 and
xen-tools-3.3.1 as dependencies. However, I started off my Xen Dom 0
pvops kernel install with Xen 3.4.1 rc8 branch.
I need to investigate
more why
suddenly my CentOS 4.7 32-bit PV guest is able to start.
Mr. Teo En Ming (Zhang
Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support
Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 21:54:00 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Hi Pasi,
I realized that
Fedora 10
32-bit anaconda installer does not install PAE kernel after mounting
the guest disk image file. I mounted the guest disk image file using
losetup and kpartx which adds device nodes to /dev/mapper. I examined
the /boot directory after mounting the guest disk image file and found
no PAE vmlinuz and initrd.
Still using the
mounted Fedora
10 32-bit guest disk image file, I changed root to the guest disk
filesystems and attempted to install the PAE kernel. Then I modified
menu.lst to boot the PAE kernel. After modifying the grub configuration
of the guest domain, I un-mounted the guest filesystem.
I proceeded to boot
the F10
32-bit guest, since I changed to PAE kernel. It is able to boot now
(since the PAE kernel is xen-aware) but then it complains cannot mount
/dev/root. Probably something to do with the PAE initrd file.
Mr. Teo En Ming
(Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support
Engineer
Information
Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming <enming.teo@asiasoftsea.net>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 16:31:19 +0300
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
On Fri, Jul 24,
2009 at 08:37:09PM +0800, Teo En Ming wrote:
> Hi
>
> I attempted to install Fedora 10 32-bit PV guest using
> images/pxeboot/vmlinuz-PAE and images/pxeboot/initrd-PAE.img from
the F10
> media. The non-PAE kernel could not load the installer. I finished
my Fedora
> 10 32-bit PV guest installation but it also cannot boot up after
> installation, same as the CentOS 4.7 PV guest installation.
>
Fedora 10 installer has a bug, as a default it installs non-PAE kernel
for
xen domU. You need to use a kickstart script (like this) to fix it:
http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
The important lines being:
-kernel
kernel-PAE
(Fedora 10 and Fedora 11 default kernels are compiled with pv_ops Xen
domU
support enabled, so there's no need for separate kernel-xen with these
distros).
Fedora 11 doesn't have that installer bug, so it installs right
out-of-the-box as Xen domU.
What's the error you get when you start the guest after installation?
Please paste the "xm log" as text.
I don't have any problems with CentOS 5.3 dom0.
-- Pasi
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date:
07/25/09 01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 39903 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-25 18:13 Boris Derzhavets
2009-07-26 2:44 ` Mr. Teo En Ming (Zhang Enming)
0 siblings, 1 reply; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-25 18:13 UTC (permalink / raw)
To: enming.teo; +Cc: Sander Eikelenboom, "Pasi Kr", xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 29455 bytes --]
Anyway libvirtd is tuned to work only with coming along with your distro Xen Host . In case of Suse it would be Xen 3.3.1 unable to load PVOPS kernel in case of F10 (xen-3.3.1-11.fc11.src.rpm installed along with generated packages) Xen 3.3.1 been able to load PVOPS kernel.
Xen 3.4.1 Dom0 noway. The only option wait for xen-3.4.1-XX.fc12.src.rpm
for F11 . Several months at best. Official 3.4.1 tarball is still due.
So , setup DHCP Server on remote host and place your Xen 3.4.1 Dom0 on "dhcp" bridge.
Defaul OSOL behavior might be changed , but it requires management
Solaris Services Management Facility (SMF).
Boris.
--- On Sat, 7/25/09, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, Pasi Kr@yahoo.com, xen-devel@lists.xensource.com
Date: Saturday, July 25, 2009, 1:24 PM
This means that OSOL installer (by default ) will issue DHCPDISCOVER via your Xen bridge, looking for DHCP server on your LAN. Only on RHEL 5.3
(F10 with Xen 3.3.1 src.rpm been installed along with generated packages) with libvirtd & dnsmasq up and running you can specify
vif=['bridge=virbr0' ] to detect DHCP Server at your Dom0.
View for instance :-
http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
I don't have any experience with OpenSuse 11.1 . I hardly remind they tried to reproduce RH's technology. Most probably they did it in SLES 11 (not sure). Check for libvirtd&dnsmasq daemons up and running.
But if your OpenSuse 11.1 Dom0 is on "dhcp" bridge itself , then no problems. Just vif=['bridge=eth0'].
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming
(Zhang Enming) <enming.teo@asiasoftsea.net> wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, Pasi Kr@yahoo.com, xen-devel@lists.xensource.com
Date: Saturday, July 25, 2009, 12:32 PM
Dear Boris,
This means I have to install a DHCP server or dnsmasq in my Dom 0,
listening on my Dom 0's IP address, so that it can assign dynamic IP
addresses to the DomU.
By the way, are there any paravirtualized device drivers that I can
install in DomU to improve the performance of the virtual machine?
Thank you.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
>I noticed under the guest domain configuration there
is a parameter
called >'extra' kernel parameter. Does the 'nowin' argument stand
for no
>graphical windows?
Login as jack/jack to text console.
Wait until :-
$ pfexec ifconfig -a
will show up your IPv4 address
$ mkdir .vnc
$ cp .Xclients .vnc/xstartup
$ vncserver
Connect via vncviewer IP-DomU:1 from another terminal session to OSOL
DomU. In case OSOL installer will fail to obtain IP via DHCPDISCOVER,
let me know. It might happen and requires Solaris Kernel Model Debugger
to disable checksum offloading at boot up. Seems to be hardware
dependent issue for OSOL 2009.06
**********************************
Copy ramdisk and kernel to Dom0
**********************************
[root@ServerXen isos]# cat copy.sh
mount -o loop,ro osol-0906-x86.iso /mnt
cp /mnt/boot/amd64/x86.microroot /home/boris/solaris
cp /mnt/platform/i86xpv/kernel/amd64/unix /home/boris/solaris
***********************
Installation profile:-
***********************
[root@ServerXen solaris]# cat osol200906.install
name = "sol0906"
vcpus = 1
memory = "1024"
kernel = "/home/boris/solaris/unix"
ramdisk = "/home/boris/solaris/x86.microroot"
extra = "/platform/i86xpv/kernel/amd64/unix - nowin -B
install_media=cdrom"
disk = ['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
# Would work as well
#
disk = ['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']
vif = ['bridge=eth1']
on_shutdown = "destroy"
on_reboot = "destroy"
on_crash = "destroy"
Boris
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, "Boris
Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com, =?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
Date: Saturday, July 25, 2009, 7:14 AM
Dear All,
I am trying to install OpenSolaris 2009.06 32-bit paravirtualized guest
on OpenSUSE 11.1 32-bit paravirt-ops enabled Xen 3.4.1-rc8 Dom 0 Kernel
2.6.30-rc6.
However, I am getting an opensolaris console login prompt. There is no
GNOME DE for me to launch the GUI installer for OpenSolaris. I am using
the OpenSolaris LiveCD 32-bit.
I noticed under the guest domain configuration there is a parameter
called 'extra' kernel parameter. Does the 'nowin' argument stand for no
graphical windows?
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
Then I also get the "invalid disk device number (768)" error. Do I need
to use xvda instead of hda?
Thank you very much.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo En Ming wrote:
As a matter of fact, our servers are either Dell
PowerEdge
1950/2950 and IBM xSeries.
I am just testing it out on our lab PC first.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
"Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Sat, 25 Jul 2009 02:27:02 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Dear Boris,
My next step will be a 64-bit Xen Dom 0 host.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: Pasi Kärkkäinen <pasik@iki.fi>,
enming.teo@asiasoftsea.net
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 10:57:49 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Teo, it is up to you how to manage, if you just having
fun.
Otherwise, downloading 64-bit OpenSuse 11.1 ISO image
takes just 12-14 hr even at slow ADSL speed ( like 100 KB/sec).
Install takes 30 minutes and brings you to the trusted results, instead
of wasting a lot of time in case of business environment assignment.
Pasi has 32-bit experience due to hardware limitations, which you don't
have.
Boris.
--- On Fri, 7/24/09, Teo En Ming
<enming.teo@asiasoftsea.net>
wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
"Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:56 PM
Dear Boris,
My colleague installed OpenSUSE 11.1
32-bit on the
Core 2 Duo machine in our labs. Please see my earlier replies in the
same topic.
I was too lazy to reformat and install
64-bit
OpenSUSE, so I proceeded with Xen Dom 0 pvops kernel compilation on
32-bit Linux host.
I admit I am getting a lot of headache.
Haha.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: enming.teo@asiasoftsea.net,
Pasi Kärkkäinen <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Once again, i don't see any reason to to run 32-bit OS on
Core2Duo,
unless you like Xen head ache. Core development (PVOPS) is obviously
running in 64-bit environment.
Boris.
--- On Fri, 7/24/09, Boris Derzhavets
<bderzhavets@yahoo.com>
wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:47 PM
>After doing the
above, I re-installed back the Xen hypervisor, libraries and tools, and
also >the kernel, initrd, and modules. Then I proceeded to reboot my
machine. After rebooting, > my CentOS 4.7 32-bit PV guest is still
able to start and run!
Why it wouldn't ? If your image stays the same.
> I am still very
puzzled! What
causes the PV guest initially cannot start? Then what >subsequently
causes the PV guest to suddenly be able to start and run???
That is not supposed to happen. I would suggest clean OS (without any
built in xen presence) install , followed by Xen 3.4.1+pvops kernel
clean install.
Boris.
--- On Fri, 7/24/09, Teo En Ming
<enming.teo@asiasoftsea.net>
wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Teo En Ming" <enming.teo@asiasoftsea.net>,
"Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:19 PM
Dear All,
I am very puzzled. In
investigating the cause of the sudden success of the CentOS 4.7 32-bit
PV guest being able to run, I have uninstalled virt-manager and all of
its dependencies:
docbook
python-gtk-vnc
xen-libs 3.3.1
scrollkeeper
xen-tools 3.3.1
libvirt 0.4.6
libvirt-python
vm-install 0.3.24
Then I proceeded to
"make
uninstall" in xen-3.4-testing source tree, which also removed my self
compiled Xen Dom 0 pvops enabled kernel, initrd and kernel modules.
After doing the above, I
re-installed back the Xen hypervisor, libraries and tools, and also the
kernel, initrd, and modules. Then I proceeded to reboot my machine.
After rebooting, my CentOS 4.7 32-bit PV guest is still able to start
and run!
I am still very puzzled!
What
causes the PV guest initially cannot start? Then what subsequently
causes the PV guest to suddenly be able to start and run???
***scratches head***
Anyway my CentOS 4.7
guest domain
is now running. I shall now proceed to virtualize OpenSolaris 2009.06.
Thank you.
Also see screenshots of
my CentOS
4.7 PV guest here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
Mr. Teo En Ming (Zhang
Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support
Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Teo En Ming" <enming.teo@asiasoftsea.net>,
"Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 22:54:26 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Hi Pasi,
It's very strange.
Suddenly my
CentOS 4.7 32-bit PV guest is able to start!!! Previously it refuses to
start at all.
I think I must have
changed
something in Dom 0 when I attempted "yast --install virt-manager". This
action might have solved the problem. When I tried to install
virt-manager, it also tries to install xen-libs-3.3.1 and
xen-tools-3.3.1 as dependencies. However, I started off my Xen Dom 0
pvops kernel install with Xen 3.4.1 rc8 branch.
I need to investigate
more why
suddenly my CentOS 4.7 32-bit PV guest is able to start.
Mr. Teo En Ming (Zhang
Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support
Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 21:54:00 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Hi Pasi,
I realized that
Fedora 10
32-bit anaconda installer does not install PAE kernel after mounting
the guest disk image file. I mounted the guest disk image file using
losetup and kpartx which adds device nodes to /dev/mapper. I examined
the /boot directory after mounting the guest disk image file and found
no PAE vmlinuz and initrd.
Still using the
mounted Fedora
10 32-bit guest disk image file, I changed root to the guest disk
filesystems and attempted to install the PAE kernel. Then I modified
menu.lst to boot the PAE kernel. After modifying the grub configuration
of the guest domain, I un-mounted the guest filesystem.
I proceeded to boot
the F10
32-bit guest, since I changed to PAE kernel. It is able to boot now
(since the PAE kernel is xen-aware) but then it complains cannot mount
/dev/root. Probably something to do with the PAE initrd file.
Mr. Teo En Ming
(Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support
Engineer
Information
Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming <enming.teo@asiasoftsea.net>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 16:31:19 +0300
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
On Fri, Jul 24,
2009 at 08:37:09PM +0800, Teo En Ming wrote:
> Hi
>
> I attempted to install Fedora 10 32-bit PV guest using
> images/pxeboot/vmlinuz-PAE and images/pxeboot/initrd-PAE.img from
the F10
> media. The non-PAE kernel could not load the installer. I finished
my Fedora
> 10 32-bit PV guest installation but it also cannot boot up after
> installation, same as the CentOS 4.7 PV guest installation.
>
Fedora 10 installer has a bug, as a default it installs non-PAE kernel
for
xen domU. You need to use a kickstart script (like this) to fix it:
http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
The important lines being:
-kernel
kernel-PAE
(Fedora 10 and Fedora 11 default kernels are compiled with pv_ops Xen
domU
support enabled, so there's no need for separate kernel-xen with these
distros).
Fedora 11 doesn't have that installer bug, so it installs right
out-of-the-box as Xen domU.
What's the error you get when you start the guest after installation?
Please paste the "xm log" as text.
I don't have any problems with CentOS 5.3 dom0.
-- Pasi
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date:
07/25/09 01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 40931 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-25 17:24 Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel Boris Derzhavets
@ 2009-07-26 2:42 ` Mr. Teo En Ming (Zhang Enming)
2009-07-26 2:50 ` Mr. Teo En Ming (Zhang Enming)
0 siblings, 1 reply; 86+ messages in thread
From: Mr. Teo En Ming (Zhang Enming) @ 2009-07-26 2:42 UTC (permalink / raw)
To: bderzhavets; +Cc: Sander Eikelenboom, "Pasi Kr", xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 35034 bytes --]
Dear Boris,
The ethernet network bridge on OpenSUSE 11.1 is eth0.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
> This means that OSOL installer (by default ) will issue DHCPDISCOVER
> via your Xen bridge, looking for DHCP server on your LAN. Only on RHEL 5.3
> (F10 with Xen 3.3.1 src.rpm been installed along with generated
> packages) with libvirtd & dnsmasq up and running you can specify
> vif=['bridge=virbr0' ] to detect DHCP Server at your Dom0.
>
> View for instance :-
> http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
>
> I don't have any experience with OpenSuse 11.1 . I hardly remind they
> tried to reproduce RH's technology. Most probably they did it in SLES
> 11 (not sure). Check for libvirtd&dnsmasq daemons up and running.
> But if your OpenSuse 11.1 Dom0 is on "dhcp" bridge itself , then no
> problems. Just vif=['bridge=eth0'].
>
> Boris.
>
> --- On *Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
> /<enming.teo@asiasoftsea.net>/* wrote:
>
>
> From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> PVOPS Kernel
> To: bderzhavets@yahoo.com
> Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, Pasi
> Kr@yahoo.com, xen-devel@lists.xensource.com
> Date: Saturday, July 25, 2009, 12:32 PM
>
> Dear Boris,
>
> This means I have to install a DHCP server or dnsmasq in my Dom 0,
> listening on my Dom 0's IP address, so that it can assign dynamic
> IP addresses to the DomU.
>
> By the way, are there any paravirtualized device drivers that I
> can install in DomU to improve the performance of the virtual machine?
>
> Thank you.
>
> --
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
> Technical Support Engineer
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Republic of Singapore
> Mobile Phone: +65-9648-9798
> MSN: teoenming@hotmail.com
>
>
> Boris Derzhavets wrote:
>> >I noticed under the guest domain configuration there is a
>> parameter called >'extra' kernel parameter. Does the 'nowin'
>> argument stand for no >graphical windows?
>>
>> Login as jack/jack to text console.
>>
>> Wait until :-
>>
>> $ pfexec ifconfig -a
>>
>> will show up your IPv4 address
>>
>> $ mkdir .vnc
>> $ cp .Xclients .vnc/xstartup
>> $ vncserver
>>
>> Connect via vncviewer IP-DomU:1 from another terminal session to
>> OSOL DomU. In case OSOL installer will fail to obtain IP via
>> DHCPDISCOVER,
>> let me know. It might happen and requires Solaris Kernel Model
>> Debugger
>> to disable checksum offloading at boot up. Seems to be hardware
>> dependent issue for OSOL 2009.06
>>
>> **********************************
>> Copy ramdisk and kernel to Dom0
>> **********************************
>> |
>> [root@ServerXen isos]# cat copy.sh
>> mount -o loop,ro osol-0906-x86.iso /mnt
>> cp /mnt/boot/amd64/x86.microroot /home/boris/solaris
>> cp /mnt/platform/i86xpv/kernel/amd64/unix /home/boris/solaris
>> |
>>
>>
>> ***********************
>> Installation profile:-
>> ***********************
>> |
>> [root@ServerXen solaris]# cat osol200906.install
>> name = "sol0906"
>> vcpus = 1
>> memory = "1024"
>> kernel = "/home/boris/solaris/unix"
>> ramdisk = "/home/boris/solaris/x86.microroot"
>> extra = "/platform/i86xpv/kernel/amd64/unix - nowin -B
>> install_media=cdrom"
>> disk = ['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
>> # Would work as well
>> # || disk = ['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']|
>> |vif = ['bridge=eth1']
>> on_shutdown = "destroy"
>> on_reboot = "destroy"
>> on_crash = "destroy"|
>>
>> Boris
>>
>> --- On *Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
>> /<enming.teo@asiasoftsea.net>/* wrote:
>>
>>
>> From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
>> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
>> Jeremy's PVOPS Kernel
>> To: enming.teo@asiasoftsea.net
>> Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, "Boris
>> Derzhavets" <bderzhavets@yahoo.com>,
>> xen-devel@lists.xensource.com,
>> =?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
>> Date: Saturday, July 25, 2009, 7:14 AM
>>
>> Dear All,
>>
>> I am trying to install OpenSolaris 2009.06 32-bit
>> paravirtualized guest on OpenSUSE 11.1 32-bit paravirt-ops
>> enabled Xen 3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6.
>>
>> However, I am getting an opensolaris console login prompt.
>> There is no GNOME DE for me to launch the GUI installer for
>> OpenSolaris. I am using the OpenSolaris LiveCD 32-bit.
>>
>> I noticed under the guest domain configuration there is a
>> parameter called 'extra' kernel parameter. Does the 'nowin'
>> argument stand for no graphical windows?
>>
>> http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
>>
>> http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
>>
>> http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
>>
>> Then I also get the "invalid disk device number (768)" error.
>> Do I need to use xvda instead of hda?
>>
>> Thank you very much.
>>
>> --
>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
>> Technical Support Engineer
>> Information Technology Department
>> Asiasoft Online Pte Ltd
>> Tampines Central 1 #04-01 Tampines Plaza
>> Singapore 529541
>> Republic of Singapore
>> Mobile Phone: +65-9648-9798
>> MSN: teoenming@hotmail.com
>>
>>
>>
>> Teo En Ming wrote:
>>> As a matter of fact, our servers are either Dell PowerEdge
>>> 1950/2950 and IBM xSeries.
>>>
>>> I am just testing it out on our lab PC first.
>>>
>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>>> BEng(Hons)(Mechanical Engineering)
>>> Technical Support Engineer
>>> Information Technology Department
>>> Asiasoft Online Pte Ltd
>>> Tampines Central 1 #04-01 Tampines Plaza
>>> Singapore 529541
>>> Republic of Singapore
>>> Mobile Phone: +65-9648-9798
>>> MSN: teoenming@hotmail.com
>>>
>>>
>>> -----Original Message-----
>>> From: "Teo En Ming" <enming.teo@asiasoftsea.net>
>>> To: "Boris Derzhavets" <bderzhavets@yahoo.com>, "Pasi
>>> Kärkkäinen" <pasik@iki.fi>
>>> Cc: Sander Eikelenboom <linux@eikelenboom.it>,
>>> xen-devel@lists.xensource.com
>>> Date: Sat, 25 Jul 2009 02:27:02 +0800
>>> Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen
>>> Dom 0 in Jeremy's PVOPS Kernel
>>>
>>> Dear Boris,
>>>
>>> My next step will be a 64-bit Xen Dom 0 host.
>>>
>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
>>> Engineering) BEng(Hons)(Mechanical Engineering)
>>> Technical Support Engineer
>>> Information Technology Department
>>> Asiasoft Online Pte Ltd
>>> Tampines Central 1 #04-01 Tampines Plaza
>>> Singapore 529541
>>> Republic of Singapore
>>> Mobile Phone: +65-9648-9798
>>> MSN: teoenming@hotmail.com
>>>
>>>
>>> -----Original Message-----
>>> From: Boris Derzhavets <bderzhavets@yahoo.com>
>>> To: Pasi Kärkkäinen <pasik@iki.fi>,
>>> enming.teo@asiasoftsea.net
>>> Cc: Sander Eikelenboom <linux@eikelenboom.it>,
>>> xen-devel@lists.xensource.com
>>> Date: Fri, 24 Jul 2009 10:57:49 -0700 (PDT)
>>> Subject: Re: Re[8]: [Xen-devel] Unable to Configure
>>> Xen Dom 0 in Jeremy's PVOPS Kernel
>>>
>>> Teo, it is up to you how to manage, if you just
>>> having fun.
>>> Otherwise, downloading 64-bit OpenSuse 11.1 ISO image
>>> takes just 12-14 hr even at slow ADSL speed ( like
>>> 100 KB/sec).
>>> Install takes 30 minutes and brings you to the
>>> trusted results, instead
>>> of wasting a lot of time in case of business
>>> environment assignment.
>>> Pasi has 32-bit experience due to hardware
>>> limitations, which you don't
>>> have.
>>>
>>> Boris.
>>>
>>> --- On *Fri, 7/24/09, Teo En Ming /
>>> <enming.teo@asiasoftsea.net>/* wrote:
>>>
>>>
>>> From: Teo En Ming <enming.teo@asiasoftsea.net>
>>> Subject: Re: Re[8]: [Xen-devel] Unable to
>>> Configure Xen Dom 0 in Jeremy's PVOPS Kernel
>>> To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
>>> "Pasi Kärkkäinen" <pasik@iki.fi>
>>> Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
>>> xen-devel@lists.xensource.com
>>> Date: Friday, July 24, 2009, 12:56 PM
>>>
>>> Dear Boris,
>>>
>>> My colleague installed OpenSUSE 11.1 32-bit on
>>> the Core 2 Duo machine in our labs. Please see
>>> my earlier replies in the same topic.
>>>
>>> I was too lazy to reformat and install 64-bit
>>> OpenSUSE, so I proceeded with Xen Dom 0 pvops
>>> kernel compilation on 32-bit Linux host.
>>>
>>> I admit I am getting a lot of headache. Haha.
>>>
>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
>>> Engineering) BEng(Hons)(Mechanical Engineering)
>>> Technical Support Engineer
>>> Information Technology Department
>>> Asiasoft Online Pte Ltd
>>> Tampines Central 1 #04-01 Tampines Plaza
>>> Singapore 529541
>>> Republic of Singapore
>>> Mobile Phone: +65-9648-9798
>>> MSN: teoenming@hotmail.com
>>>
>>>
>>> -----Original Message-----
>>> From: Boris Derzhavets <bderzhavets@yahoo.com>
>>> To: enming.teo@asiasoftsea.net, Pasi
>>> Kärkkäinen <pasik@iki.fi>
>>> Cc: Sander Eikelenboom
>>> <linux@eikelenboom.it>,
>>> xen-devel@lists.xensource.com
>>> Date: Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
>>> Subject: Re: Re[8]: [Xen-devel] Unable to
>>> Configure Xen Dom 0 in Jeremy's PVOPS Kernel
>>>
>>> Once again, i don't see any reason to to run
>>> 32-bit OS on Core2Duo,
>>> unless you like Xen head ache. Core
>>> development (PVOPS) is obviously
>>> running in 64-bit environment.
>>>
>>> Boris.
>>>
>>> --- On *Fri, 7/24/09, Boris Derzhavets /
>>> <bderzhavets@yahoo.com>/* wrote:
>>>
>>>
>>> From: Boris Derzhavets
>>> <bderzhavets@yahoo.com>
>>> Subject: Re: Re[8]: [Xen-devel] Unable
>>> to Configure Xen Dom 0 in Jeremy's PVOPS
>>> Kernel
>>> To: enming.teo@asiasoftsea.net, "Pasi
>>> Kärkkäinen" <pasik@iki.fi>
>>> Cc: "Sander Eikelenboom"
>>> <linux@eikelenboom.it>,
>>> xen-devel@lists.xensource.com
>>> Date: Friday, July 24, 2009, 12:47 PM
>>>
>>> >After doing the above, I re-installed
>>> back the Xen hypervisor, libraries and
>>> tools, and also >the kernel, initrd, and
>>> modules. Then I proceeded to reboot my
>>> machine. After rebooting, > my CentOS
>>> 4.7 32-bit PV guest is still able to
>>> start and run!
>>>
>>> Why it wouldn't ? If your image stays
>>> the same.
>>>
>>> > I am still very puzzled! What causes
>>> the PV guest initially cannot start?
>>> Then what >subsequently causes the PV
>>> guest to suddenly be able to start and
>>> run???
>>>
>>>
>>> That is not supposed to happen. I would
>>> suggest clean OS (without any built in
>>> xen presence) install , followed by Xen
>>> 3.4.1+pvops kernel clean install.
>>>
>>> Boris.
>>>
>>> --- On *Fri, 7/24/09, Teo En Ming /
>>> <enming.teo@asiasoftsea.net>/* wrote:
>>>
>>>
>>> From: Teo En Ming
>>> <enming.teo@asiasoftsea.net>
>>> Subject: Re: Re[8]: [Xen-devel]
>>> Unable to Configure Xen Dom 0 in
>>> Jeremy's PVOPS Kernel
>>> To: "Teo En Ming"
>>> <enming.teo@asiasoftsea.net>, "Pasi
>>> Kärkkäinen" <pasik@iki.fi>
>>> Cc: "Sander Eikelenboom"
>>> <linux@eikelenboom.it>,
>>> xen-devel@lists.xensource.com
>>> Date: Friday, July 24, 2009, 12:19 PM
>>>
>>> Dear All,
>>>
>>> I am very puzzled. In investigating
>>> the cause of the sudden success of
>>> the CentOS 4.7 32-bit PV guest being
>>> able to run, I have uninstalled
>>> virt-manager and all of its
>>> dependencies:
>>>
>>> docbook
>>> python-gtk-vnc
>>> xen-libs 3.3.1
>>> scrollkeeper
>>> xen-tools 3.3.1
>>> libvirt 0.4.6
>>> libvirt-python
>>> vm-install 0.3.24
>>>
>>> Then I proceeded to "make uninstall"
>>> in xen-3.4-testing source tree,
>>> which also removed my self compiled
>>> Xen Dom 0 pvops enabled kernel,
>>> initrd and kernel modules.
>>>
>>> After doing the above, I
>>> re-installed back the Xen
>>> hypervisor, libraries and tools, and
>>> also the kernel, initrd, and
>>> modules. Then I proceeded to reboot
>>> my machine. After rebooting, my
>>> CentOS 4.7 32-bit PV guest is still
>>> able to start and run!
>>>
>>> I am still very puzzled! What causes
>>> the PV guest initially cannot start?
>>> Then what subsequently causes the PV
>>> guest to suddenly be able to start
>>> and run???
>>>
>>> ***scratches head***
>>>
>>> Anyway my CentOS 4.7 guest domain is
>>> now running. I shall now proceed to
>>> virtualize OpenSolaris 2009.06.
>>>
>>> Thank you.
>>>
>>> Also see screenshots of my CentOS
>>> 4.7 PV guest here:
>>> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
>>>
>>>
>>> Mr. Teo En Ming (Zhang Enming)
>>> Dip(Mechatronics Engineering)
>>> BEng(Hons)(Mechanical Engineering)
>>> Technical Support Engineer
>>> Information Technology Department
>>> Asiasoft Online Pte Ltd
>>> Tampines Central 1 #04-01 Tampines
>>> Plaza
>>> Singapore 529541
>>> Republic of Singapore
>>> Mobile Phone: +65-9648-9798
>>> MSN: teoenming@hotmail.com
>>>
>>>
>>> -----Original Message-----
>>> From: "Teo En Ming"
>>> <enming.teo@asiasoftsea.net>
>>> To: "Teo En Ming"
>>> <enming.teo@asiasoftsea.net>,
>>> "Pasi Kärkkäinen" <pasik@iki.fi>
>>> Cc: Sander Eikelenboom
>>> <linux@eikelenboom.it>,
>>> xen-devel@lists.xensource.com
>>> Date: Fri, 24 Jul 2009 22:54:26
>>> +0800
>>> Subject: Re: Re[8]: [Xen-devel]
>>> Unable to Configure Xen Dom 0 in
>>> Jeremy's PVOPS Kernel
>>>
>>> Hi Pasi,
>>>
>>> It's very strange. Suddenly my
>>> CentOS 4.7 32-bit PV guest is
>>> able to start!!! Previously it
>>> refuses to start at all.
>>>
>>> I think I must have changed
>>> something in Dom 0 when I
>>> attempted "yast --install
>>> virt-manager". This action might
>>> have solved the problem. When I
>>> tried to install virt-manager,
>>> it also tries to install
>>> xen-libs-3.3.1 and
>>> xen-tools-3.3.1 as dependencies.
>>> However, I started off my Xen
>>> Dom 0 pvops kernel install with
>>> Xen 3.4.1 rc8 branch.
>>>
>>> I need to investigate more why
>>> suddenly my CentOS 4.7 32-bit PV
>>> guest is able to start.
>>>
>>> Mr. Teo En Ming (Zhang Enming)
>>> Dip(Mechatronics Engineering)
>>> BEng(Hons)(Mechanical Engineering)
>>> Technical Support Engineer
>>> Information Technology Department
>>> Asiasoft Online Pte Ltd
>>> Tampines Central 1 #04-01
>>> Tampines Plaza
>>> Singapore 529541
>>> Republic of Singapore
>>> Mobile Phone: +65-9648-9798
>>> MSN: teoenming@hotmail.com
>>>
>>>
>>> -----Original Message-----
>>> From: "Teo En Ming"
>>> <enming.teo@asiasoftsea.net>
>>> To: "Pasi Kärkkäinen"
>>> <pasik@iki.fi>
>>> Cc: Sander Eikelenboom
>>> <linux@eikelenboom.it>,
>>> xen-devel@lists.xensource.com
>>> Date: Fri, 24 Jul 2009
>>> 21:54:00 +0800
>>> Subject: Re: Re[8]:
>>> [Xen-devel] Unable to
>>> Configure Xen Dom 0 in
>>> Jeremy's PVOPS Kernel
>>>
>>> Hi Pasi,
>>>
>>> I realized that Fedora 10
>>> 32-bit anaconda installer
>>> does not install PAE kernel
>>> after mounting the guest
>>> disk image file. I mounted
>>> the guest disk image file
>>> using losetup and kpartx
>>> which adds device nodes to
>>> /dev/mapper. I examined the
>>> /boot directory after
>>> mounting the guest disk
>>> image file and found no PAE
>>> vmlinuz and initrd.
>>>
>>> Still using the mounted
>>> Fedora 10 32-bit guest disk
>>> image file, I changed root
>>> to the guest disk
>>> filesystems and attempted to
>>> install the PAE kernel. Then
>>> I modified menu.lst to boot
>>> the PAE kernel. After
>>> modifying the grub
>>> configuration of the guest
>>> domain, I un-mounted the
>>> guest filesystem.
>>>
>>> I proceeded to boot the F10
>>> 32-bit guest, since I
>>> changed to PAE kernel. It is
>>> able to boot now (since the
>>> PAE kernel is xen-aware) but
>>> then it complains cannot
>>> mount /dev/root. Probably
>>> something to do with the PAE
>>> initrd file.
>>>
>>>
>>> Mr. Teo En Ming (Zhang
>>> Enming) Dip(Mechatronics
>>> Engineering)
>>> BEng(Hons)(Mechanical
>>> Engineering)
>>> Technical Support Engineer
>>> Information Technology
>>> Department
>>> Asiasoft Online Pte Ltd
>>> Tampines Central 1 #04-01
>>> Tampines Plaza
>>> Singapore 529541
>>> Republic of Singapore
>>> Mobile Phone: +65-9648-9798
>>> MSN: teoenming@hotmail.com
>>>
>>>
>>> -----Original Message-----
>>> From: Pasi Kärkkäinen
>>> <pasik@iki.fi>
>>> To: Teo En Ming
>>> <enming.teo@asiasoftsea.net>
>>>
>>> Cc: Sander Eikelenboom
>>> <linux@eikelenboom.it>,
>>> xen-devel@lists.xensource.com
>>>
>>> Date: Fri, 24 Jul 2009
>>> 16:31:19 +0300
>>> Subject: Re: Re[8]:
>>> [Xen-devel] Unable to
>>> Configure Xen Dom 0 in
>>> Jeremy's PVOPS Kernel
>>>
>>> On Fri, Jul 24, 2009 at
>>> 08:37:09PM +0800, Teo En
>>> Ming wrote:
>>> > Hi
>>> >
>>> > I attempted to install
>>> Fedora 10 32-bit PV
>>> guest using
>>> >
>>> images/pxeboot/vmlinuz-PAE
>>> and
>>> images/pxeboot/initrd-PAE.img
>>> from the F10
>>> > media. The non-PAE
>>> kernel could not load
>>> the installer. I
>>> finished my Fedora
>>> > 10 32-bit PV guest
>>> installation but it also
>>> cannot boot up after
>>> > installation, same as
>>> the CentOS 4.7 PV guest
>>> installation.
>>> >
>>>
>>> Fedora 10 installer has
>>> a bug, as a default it
>>> installs non-PAE kernel for
>>> xen domU. You need to
>>> use a kickstart script
>>> (like this) to fix it:
>>> http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
>>>
>>>
>>> The important lines being:
>>>
>>> -kernel
>>> kernel-PAE
>>>
>>> (Fedora 10 and Fedora 11
>>> default kernels are
>>> compiled with pv_ops Xen
>>> domU
>>> support enabled, so
>>> there's no need for
>>> separate kernel-xen with
>>> these distros).
>>>
>>> Fedora 11 doesn't have
>>> that installer bug, so
>>> it installs right
>>> out-of-the-box as Xen domU.
>>>
>>> What's the error you get
>>> when you start the guest
>>> after installation?
>>> Please paste the "xm
>>> log" as text.
>>>
>>> I don't have any
>>> problems with CentOS 5.3
>>> dom0.
>>>
>>> -- Pasi
>>>
>>>
>>> -----Inline Attachment Follows-----
>>>
>>> _______________________________________________
>>>
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>>
>>>
>>>
>>> -----Inline Attachment Follows-----
>>>
>>> _______________________________________________
>>>
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>>
>>>
>>>
>>> -----Inline Attachment Follows-----
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>>
>>
>>
>> -----Inline Attachment Follows-----
>>
>>
>> No virus found in this outgoing message.
>> Checked by AVG - www.avg.com
>> Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release
>> Date: 07/25/09 01:48:00
>>
>> -----Inline Attachment Follows-----
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>
>
> -----Inline Attachment Follows-----
>
>
> No virus found in this outgoing message.
> Checked by AVG - www.avg.com
> Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date:
> 07/25/09 01:48:00
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> </mc/compose?to=Xen-devel@lists.xensource.com>
> http://lists.xensource.com/xen-devel
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
[-- Attachment #1.2: Type: text/html, Size: 45464 bytes --]
[-- Attachment #2.1: "AVG certification" --]
[-- Type: text/plain, Size: 159 bytes --]
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-25 18:13 Boris Derzhavets
@ 2009-07-26 2:44 ` Mr. Teo En Ming (Zhang Enming)
0 siblings, 0 replies; 86+ messages in thread
From: Mr. Teo En Ming (Zhang Enming) @ 2009-07-26 2:44 UTC (permalink / raw)
To: bderzhavets; +Cc: Sander Eikelenboom, "Pasi Kr", xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 40352 bytes --]
Red Hat's Fedora 12 will be officially released on 3 November 2009.
Right now we can only get packages from the rawhide (Fedora 12 development).
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
> Anyway libvirtd is tuned to work only with coming along with your
> distro Xen Host . In case of Suse it would be Xen 3.3.1 unable to load
> PVOPS kernel in case of F10 (xen-3.3.1-11.fc11.src.rpm installed along
> with generated packages) Xen 3.3.1 been able to load PVOPS kernel.
> Xen 3.4.1 Dom0 noway. The only option wait for xen-3.4.1-XX.fc12.src.rpm
> for F11 . Several months at best. Official 3.4.1 tarball is still due.
> So , setup DHCP Server on remote host and place your Xen 3.4.1 Dom0 on
> "dhcp" bridge.
>
> Defaul OSOL behavior might be changed , but it requires management
> Solaris Services Management Facility (SMF).
>
> Boris.
>
> --- On *Sat, 7/25/09, Boris Derzhavets /<bderzhavets@yahoo.com>/* wrote:
>
>
> From: Boris Derzhavets <bderzhavets@yahoo.com>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> PVOPS Kernel
> To: enming.teo@asiasoftsea.net
> Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, Pasi
> Kr@yahoo.com, xen-devel@lists.xensource.com
> Date: Saturday, July 25, 2009, 1:24 PM
>
> This means that OSOL installer (by default ) will issue
> DHCPDISCOVER via your Xen bridge, looking for DHCP server on your
> LAN. Only on RHEL 5.3
> (F10 with Xen 3.3.1 src.rpm been installed along with generated
> packages) with libvirtd & dnsmasq up and running you can specify
> vif=['bridge=virbr0' ] to detect DHCP Server at your Dom0.
>
> View for instance :-
> http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
>
> I don't have any experience with OpenSuse 11.1 . I hardly remind
> they tried to reproduce RH's technology. Most probably they did it
> in SLES 11 (not sure). Check for libvirtd&dnsmasq daemons up and
> running.
> But if your OpenSuse 11.1 Dom0 is on "dhcp" bridge itself , then
> no problems. Just vif=['bridge=eth0'].
>
> Boris.
>
> --- On *Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
> /<enming.teo@asiasoftsea.net>/* wrote:
>
>
> From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> Jeremy's PVOPS Kernel
> To: bderzhavets@yahoo.com
> Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, Pasi
> Kr@yahoo.com, xen-devel@lists.xensource.com
> Date: Saturday, July 25, 2009, 12:32 PM
>
> Dear Boris,
>
> This means I have to install a DHCP server or dnsmasq in my
> Dom 0, listening on my Dom 0's IP address, so that it can
> assign dynamic IP addresses to the DomU.
>
> By the way, are there any paravirtualized device drivers that
> I can install in DomU to improve the performance of the
> virtual machine?
>
> Thank you.
>
> --
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
> Technical Support Engineer
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Republic of Singapore
> Mobile Phone: +65-9648-9798
> MSN: teoenming@hotmail.com
>
>
> Boris Derzhavets wrote:
>> >I noticed under the guest domain configuration there is a
>> parameter called >'extra' kernel parameter. Does the 'nowin'
>> argument stand for no >graphical windows?
>>
>> Login as jack/jack to text console.
>>
>> Wait until :-
>>
>> $ pfexec ifconfig -a
>>
>> will show up your IPv4 address
>>
>> $ mkdir .vnc
>> $ cp .Xclients .vnc/xstartup
>> $ vncserver
>>
>> Connect via vncviewer IP-DomU:1 from another terminal session
>> to OSOL DomU. In case OSOL installer will fail to obtain IP
>> via DHCPDISCOVER,
>> let me know. It might happen and requires Solaris Kernel
>> Model Debugger
>> to disable checksum offloading at boot up. Seems to be
>> hardware dependent issue for OSOL 2009.06
>>
>> **********************************
>> Copy ramdisk and kernel to Dom0
>> **********************************
>> |
>> [root@ServerXen isos]# cat copy.sh
>> mount -o loop,ro osol-0906-x86.iso /mnt
>> cp /mnt/boot/amd64/x86.microroot /home/boris/solaris
>> cp /mnt/platform/i86xpv/kernel/amd64/unix /home/boris/solaris
>> |
>>
>>
>> ***********************
>> Installation profile:-
>> ***********************
>> |
>> [root@ServerXen solaris]# cat osol200906.install
>> name = "sol0906"
>> vcpus = 1
>> memory = "1024"
>> kernel = "/home/boris/solaris/unix"
>> ramdisk = "/home/boris/solaris/x86.microroot"
>> extra = "/platform/i86xpv/kernel/amd64/unix - nowin -B
>> install_media=cdrom"
>> disk = ['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
>> # Would work as well
>> # || disk = ['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']|
>> |vif = ['bridge=eth1']
>> on_shutdown = "destroy"
>> on_reboot = "destroy"
>> on_crash = "destroy"|
>>
>> Boris
>>
>> --- On *Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
>> /<enming.teo@asiasoftsea.net>/* wrote:
>>
>>
>> From: Mr. Teo En Ming (Zhang Enming)
>> <enming.teo@asiasoftsea.net>
>> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
>> Jeremy's PVOPS Kernel
>> To: enming.teo@asiasoftsea.net
>> Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, "Boris
>> Derzhavets" <bderzhavets@yahoo.com>,
>> xen-devel@lists.xensource.com,
>> =?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
>> Date: Saturday, July 25, 2009, 7:14 AM
>>
>> Dear All,
>>
>> I am trying to install OpenSolaris 2009.06 32-bit
>> paravirtualized guest on OpenSUSE 11.1 32-bit
>> paravirt-ops enabled Xen 3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6.
>>
>> However, I am getting an opensolaris console login
>> prompt. There is no GNOME DE for me to launch the GUI
>> installer for OpenSolaris. I am using the OpenSolaris
>> LiveCD 32-bit.
>>
>> I noticed under the guest domain configuration there is a
>> parameter called 'extra' kernel parameter. Does the
>> 'nowin' argument stand for no graphical windows?
>>
>> http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
>>
>> http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
>>
>> http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
>>
>> Then I also get the "invalid disk device number (768)"
>> error. Do I need to use xvda instead of hda?
>>
>> Thank you very much.
>>
>> --
>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
>> Technical Support Engineer
>> Information Technology Department
>> Asiasoft Online Pte Ltd
>> Tampines Central 1 #04-01 Tampines Plaza
>> Singapore 529541
>> Republic of Singapore
>> Mobile Phone: +65-9648-9798
>> MSN: teoenming@hotmail.com
>>
>>
>>
>> Teo En Ming wrote:
>>> As a matter of fact, our servers are either Dell
>>> PowerEdge 1950/2950 and IBM xSeries.
>>>
>>> I am just testing it out on our lab PC first.
>>>
>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
>>> Engineering) BEng(Hons)(Mechanical Engineering)
>>> Technical Support Engineer
>>> Information Technology Department
>>> Asiasoft Online Pte Ltd
>>> Tampines Central 1 #04-01 Tampines Plaza
>>> Singapore 529541
>>> Republic of Singapore
>>> Mobile Phone: +65-9648-9798
>>> MSN: teoenming@hotmail.com
>>>
>>>
>>> -----Original Message-----
>>> From: "Teo En Ming" <enming.teo@asiasoftsea.net>
>>> To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
>>> "Pasi Kärkkäinen" <pasik@iki.fi>
>>> Cc: Sander Eikelenboom <linux@eikelenboom.it>,
>>> xen-devel@lists.xensource.com
>>> Date: Sat, 25 Jul 2009 02:27:02 +0800
>>> Subject: Re: Re[8]: [Xen-devel] Unable to Configure
>>> Xen Dom 0 in Jeremy's PVOPS Kernel
>>>
>>> Dear Boris,
>>>
>>> My next step will be a 64-bit Xen Dom 0 host.
>>>
>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
>>> Engineering) BEng(Hons)(Mechanical Engineering)
>>> Technical Support Engineer
>>> Information Technology Department
>>> Asiasoft Online Pte Ltd
>>> Tampines Central 1 #04-01 Tampines Plaza
>>> Singapore 529541
>>> Republic of Singapore
>>> Mobile Phone: +65-9648-9798
>>> MSN: teoenming@hotmail.com
>>>
>>>
>>> -----Original Message-----
>>> From: Boris Derzhavets <bderzhavets@yahoo.com>
>>> To: Pasi Kärkkäinen <pasik@iki.fi>,
>>> enming.teo@asiasoftsea.net
>>> Cc: Sander Eikelenboom <linux@eikelenboom.it>,
>>> xen-devel@lists.xensource.com
>>> Date: Fri, 24 Jul 2009 10:57:49 -0700 (PDT)
>>> Subject: Re: Re[8]: [Xen-devel] Unable to
>>> Configure Xen Dom 0 in Jeremy's PVOPS Kernel
>>>
>>> Teo, it is up to you how to manage, if you just
>>> having fun.
>>> Otherwise, downloading 64-bit OpenSuse 11.1 ISO
>>> image
>>> takes just 12-14 hr even at slow ADSL speed (
>>> like 100 KB/sec).
>>> Install takes 30 minutes and brings you to the
>>> trusted results, instead
>>> of wasting a lot of time in case of business
>>> environment assignment.
>>> Pasi has 32-bit experience due to hardware
>>> limitations, which you don't
>>> have.
>>>
>>> Boris.
>>>
>>> --- On *Fri, 7/24/09, Teo En Ming /
>>> <enming.teo@asiasoftsea.net>/* wrote:
>>>
>>>
>>> From: Teo En Ming <enming.teo@asiasoftsea.net>
>>> Subject: Re: Re[8]: [Xen-devel] Unable to
>>> Configure Xen Dom 0 in Jeremy's PVOPS Kernel
>>> To: "Boris Derzhavets"
>>> <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
>>> <pasik@iki.fi>
>>> Cc: "Sander Eikelenboom"
>>> <linux@eikelenboom.it>,
>>> xen-devel@lists.xensource.com
>>> Date: Friday, July 24, 2009, 12:56 PM
>>>
>>> Dear Boris,
>>>
>>> My colleague installed OpenSUSE 11.1 32-bit
>>> on the Core 2 Duo machine in our labs.
>>> Please see my earlier replies in the same
>>> topic.
>>>
>>> I was too lazy to reformat and install
>>> 64-bit OpenSUSE, so I proceeded with Xen Dom
>>> 0 pvops kernel compilation on 32-bit Linux
>>> host.
>>>
>>> I admit I am getting a lot of headache. Haha.
>>>
>>> Mr. Teo En Ming (Zhang Enming)
>>> Dip(Mechatronics Engineering)
>>> BEng(Hons)(Mechanical Engineering)
>>> Technical Support Engineer
>>> Information Technology Department
>>> Asiasoft Online Pte Ltd
>>> Tampines Central 1 #04-01 Tampines Plaza
>>> Singapore 529541
>>> Republic of Singapore
>>> Mobile Phone: +65-9648-9798
>>> MSN: teoenming@hotmail.com
>>>
>>>
>>> -----Original Message-----
>>> From: Boris Derzhavets
>>> <bderzhavets@yahoo.com>
>>> To: enming.teo@asiasoftsea.net, Pasi
>>> Kärkkäinen <pasik@iki.fi>
>>> Cc: Sander Eikelenboom
>>> <linux@eikelenboom.it>,
>>> xen-devel@lists.xensource.com
>>> Date: Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
>>> Subject: Re: Re[8]: [Xen-devel] Unable
>>> to Configure Xen Dom 0 in Jeremy's PVOPS
>>> Kernel
>>>
>>> Once again, i don't see any reason to to
>>> run 32-bit OS on Core2Duo,
>>> unless you like Xen head ache. Core
>>> development (PVOPS) is obviously
>>> running in 64-bit environment.
>>>
>>> Boris.
>>>
>>> --- On *Fri, 7/24/09, Boris Derzhavets /
>>> <bderzhavets@yahoo.com>/* wrote:
>>>
>>>
>>> From: Boris Derzhavets
>>> <bderzhavets@yahoo.com>
>>> Subject: Re: Re[8]: [Xen-devel]
>>> Unable to Configure Xen Dom 0 in
>>> Jeremy's PVOPS Kernel
>>> To: enming.teo@asiasoftsea.net,
>>> "Pasi Kärkkäinen" <pasik@iki.fi>
>>> Cc: "Sander Eikelenboom"
>>> <linux@eikelenboom.it>,
>>> xen-devel@lists.xensource.com
>>> Date: Friday, July 24, 2009, 12:47 PM
>>>
>>> >After doing the above, I
>>> re-installed back the Xen
>>> hypervisor, libraries and tools, and
>>> also >the kernel, initrd, and
>>> modules. Then I proceeded to reboot
>>> my machine. After rebooting, > my
>>> CentOS 4.7 32-bit PV guest is still
>>> able to start and run!
>>>
>>> Why it wouldn't ? If your image
>>> stays the same.
>>>
>>> > I am still very puzzled! What
>>> causes the PV guest initially cannot
>>> start? Then what >subsequently
>>> causes the PV guest to suddenly be
>>> able to start and run???
>>>
>>>
>>> That is not supposed to happen. I
>>> would suggest clean OS (without any
>>> built in xen presence) install ,
>>> followed by Xen 3.4.1+pvops kernel
>>> clean install.
>>>
>>> Boris.
>>>
>>> --- On *Fri, 7/24/09, Teo En Ming /
>>> <enming.teo@asiasoftsea.net>/* wrote:
>>>
>>>
>>> From: Teo En Ming
>>> <enming.teo@asiasoftsea.net>
>>> Subject: Re: Re[8]: [Xen-devel]
>>> Unable to Configure Xen Dom 0 in
>>> Jeremy's PVOPS Kernel
>>> To: "Teo En Ming"
>>> <enming.teo@asiasoftsea.net>,
>>> "Pasi Kärkkäinen" <pasik@iki.fi>
>>> Cc: "Sander Eikelenboom"
>>> <linux@eikelenboom.it>,
>>> xen-devel@lists.xensource.com
>>> Date: Friday, July 24, 2009,
>>> 12:19 PM
>>>
>>> Dear All,
>>>
>>> I am very puzzled. In
>>> investigating the cause of the
>>> sudden success of the CentOS 4.7
>>> 32-bit PV guest being able to
>>> run, I have uninstalled
>>> virt-manager and all of its
>>> dependencies:
>>>
>>> docbook
>>> python-gtk-vnc
>>> xen-libs 3.3.1
>>> scrollkeeper
>>> xen-tools 3.3.1
>>> libvirt 0.4.6
>>> libvirt-python
>>> vm-install 0.3.24
>>>
>>> Then I proceeded to "make
>>> uninstall" in xen-3.4-testing
>>> source tree, which also removed
>>> my self compiled Xen Dom 0 pvops
>>> enabled kernel, initrd and
>>> kernel modules.
>>>
>>> After doing the above, I
>>> re-installed back the Xen
>>> hypervisor, libraries and tools,
>>> and also the kernel, initrd, and
>>> modules. Then I proceeded to
>>> reboot my machine. After
>>> rebooting, my CentOS 4.7 32-bit
>>> PV guest is still able to start
>>> and run!
>>>
>>> I am still very puzzled! What
>>> causes the PV guest initially
>>> cannot start? Then what
>>> subsequently causes the PV guest
>>> to suddenly be able to start and
>>> run???
>>>
>>> ***scratches head***
>>>
>>> Anyway my CentOS 4.7 guest
>>> domain is now running. I shall
>>> now proceed to virtualize
>>> OpenSolaris 2009.06.
>>>
>>> Thank you.
>>>
>>> Also see screenshots of my
>>> CentOS 4.7 PV guest here:
>>> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
>>>
>>>
>>> Mr. Teo En Ming (Zhang Enming)
>>> Dip(Mechatronics Engineering)
>>> BEng(Hons)(Mechanical Engineering)
>>> Technical Support Engineer
>>> Information Technology Department
>>> Asiasoft Online Pte Ltd
>>> Tampines Central 1 #04-01
>>> Tampines Plaza
>>> Singapore 529541
>>> Republic of Singapore
>>> Mobile Phone: +65-9648-9798
>>> MSN: teoenming@hotmail.com
>>>
>>>
>>> -----Original Message-----
>>> From: "Teo En Ming"
>>> <enming.teo@asiasoftsea.net>
>>> To: "Teo En Ming"
>>> <enming.teo@asiasoftsea.net>,
>>> "Pasi Kärkkäinen"
>>> <pasik@iki.fi>
>>> Cc: Sander Eikelenboom
>>> <linux@eikelenboom.it>,
>>> xen-devel@lists.xensource.com
>>> Date: Fri, 24 Jul 2009
>>> 22:54:26 +0800
>>> Subject: Re: Re[8]:
>>> [Xen-devel] Unable to
>>> Configure Xen Dom 0 in
>>> Jeremy's PVOPS Kernel
>>>
>>> Hi Pasi,
>>>
>>> It's very strange. Suddenly
>>> my CentOS 4.7 32-bit PV
>>> guest is able to start!!!
>>> Previously it refuses to
>>> start at all.
>>>
>>> I think I must have changed
>>> something in Dom 0 when I
>>> attempted "yast --install
>>> virt-manager". This action
>>> might have solved the
>>> problem. When I tried to
>>> install virt-manager, it
>>> also tries to install
>>> xen-libs-3.3.1 and
>>> xen-tools-3.3.1 as
>>> dependencies. However, I
>>> started off my Xen Dom 0
>>> pvops kernel install with
>>> Xen 3.4.1 rc8 branch.
>>>
>>> I need to investigate more
>>> why suddenly my CentOS 4.7
>>> 32-bit PV guest is able to
>>> start.
>>>
>>> Mr. Teo En Ming (Zhang
>>> Enming) Dip(Mechatronics
>>> Engineering)
>>> BEng(Hons)(Mechanical
>>> Engineering)
>>> Technical Support Engineer
>>> Information Technology
>>> Department
>>> Asiasoft Online Pte Ltd
>>> Tampines Central 1 #04-01
>>> Tampines Plaza
>>> Singapore 529541
>>> Republic of Singapore
>>> Mobile Phone: +65-9648-9798
>>> MSN: teoenming@hotmail.com
>>>
>>>
>>> -----Original Message-----
>>> From: "Teo En Ming"
>>> <enming.teo@asiasoftsea.net>
>>>
>>> To: "Pasi Kärkkäinen"
>>> <pasik@iki.fi>
>>> Cc: Sander Eikelenboom
>>> <linux@eikelenboom.it>,
>>> xen-devel@lists.xensource.com
>>>
>>> Date: Fri, 24 Jul 2009
>>> 21:54:00 +0800
>>> Subject: Re: Re[8]:
>>> [Xen-devel] Unable to
>>> Configure Xen Dom 0 in
>>> Jeremy's PVOPS Kernel
>>>
>>> Hi Pasi,
>>>
>>> I realized that Fedora
>>> 10 32-bit anaconda
>>> installer does not
>>> install PAE kernel after
>>> mounting the guest disk
>>> image file. I mounted
>>> the guest disk image
>>> file using losetup and
>>> kpartx which adds device
>>> nodes to /dev/mapper. I
>>> examined the /boot
>>> directory after mounting
>>> the guest disk image
>>> file and found no PAE
>>> vmlinuz and initrd.
>>>
>>> Still using the mounted
>>> Fedora 10 32-bit guest
>>> disk image file, I
>>> changed root to the
>>> guest disk filesystems
>>> and attempted to install
>>> the PAE kernel. Then I
>>> modified menu.lst to
>>> boot the PAE kernel.
>>> After modifying the grub
>>> configuration of the
>>> guest domain, I
>>> un-mounted the guest
>>> filesystem.
>>>
>>> I proceeded to boot the
>>> F10 32-bit guest, since
>>> I changed to PAE kernel.
>>> It is able to boot now
>>> (since the PAE kernel is
>>> xen-aware) but then it
>>> complains cannot mount
>>> /dev/root. Probably
>>> something to do with the
>>> PAE initrd file.
>>>
>>>
>>> Mr. Teo En Ming (Zhang
>>> Enming) Dip(Mechatronics
>>> Engineering)
>>> BEng(Hons)(Mechanical
>>> Engineering)
>>> Technical Support Engineer
>>> Information Technology
>>> Department
>>> Asiasoft Online Pte Ltd
>>> Tampines Central 1
>>> #04-01 Tampines Plaza
>>> Singapore 529541
>>> Republic of Singapore
>>> Mobile Phone: +65-9648-9798
>>> MSN: teoenming@hotmail.com
>>>
>>>
>>> -----Original
>>> Message-----
>>> From: Pasi
>>> Kärkkäinen
>>> <pasik@iki.fi>
>>> To: Teo En Ming
>>> <enming.teo@asiasoftsea.net>
>>>
>>> Cc: Sander
>>> Eikelenboom
>>> <linux@eikelenboom.it>,
>>> xen-devel@lists.xensource.com
>>>
>>> Date: Fri, 24 Jul
>>> 2009 16:31:19 +0300
>>> Subject: Re: Re[8]:
>>> [Xen-devel] Unable
>>> to Configure Xen Dom
>>> 0 in Jeremy's PVOPS
>>> Kernel
>>>
>>> On Fri, Jul 24, 2009
>>> at 08:37:09PM +0800,
>>> Teo En Ming wrote:
>>> > Hi
>>> >
>>> > I attempted to
>>> install Fedora 10
>>> 32-bit PV guest using
>>> >
>>> images/pxeboot/vmlinuz-PAE
>>> and
>>> images/pxeboot/initrd-PAE.img
>>> from the F10
>>> > media. The non-PAE
>>> kernel could not
>>> load the installer.
>>> I finished my Fedora
>>> > 10 32-bit PV guest
>>> installation but it
>>> also cannot boot up
>>> after
>>> > installation, same
>>> as the CentOS 4.7 PV
>>> guest installation.
>>> >
>>>
>>> Fedora 10 installer
>>> has a bug, as a
>>> default it installs
>>> non-PAE kernel for
>>> xen domU. You need
>>> to use a kickstart
>>> script (like this)
>>> to fix it:
>>> http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
>>>
>>>
>>> The important lines
>>> being:
>>>
>>> -kernel
>>> kernel-PAE
>>>
>>> (Fedora 10 and
>>> Fedora 11 default
>>> kernels are compiled
>>> with pv_ops Xen domU
>>> support enabled, so
>>> there's no need for
>>> separate kernel-xen
>>> with these distros).
>>>
>>> Fedora 11 doesn't
>>> have that installer
>>> bug, so it installs
>>> right
>>> out-of-the-box as
>>> Xen domU.
>>>
>>> What's the error you
>>> get when you start
>>> the guest after
>>> installation?
>>> Please paste the "xm
>>> log" as text.
>>>
>>> I don't have any
>>> problems with CentOS
>>> 5.3 dom0.
>>>
>>> -- Pasi
>>>
>>>
>>> -----Inline Attachment Follows-----
>>>
>>> _______________________________________________
>>>
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>>
>>>
>>>
>>>
>>> -----Inline Attachment Follows-----
>>>
>>> _______________________________________________
>>>
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>>
>>>
>>>
>>> -----Inline Attachment Follows-----
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>>
>>
>>
>> -----Inline Attachment Follows-----
>>
>>
>> No virus found in this outgoing message.
>> Checked by AVG - www.avg.com
>> Version: 8.5.392 / Virus Database: 270.13.29/2260 -
>> Release Date: 07/25/09 01:48:00
>>
>> -----Inline Attachment Follows-----
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>
>
> -----Inline Attachment Follows-----
>
>
> No virus found in this outgoing message.
> Checked by AVG - www.avg.com
> Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release
> Date: 07/25/09 01:48:00
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
>
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> </mc/compose?to=Xen-devel@lists.xensource.com>
> http://lists.xensource.com/xen-devel
>
>
[-- Attachment #1.2: Type: text/html, Size: 49514 bytes --]
[-- Attachment #2.1: "AVG certification" --]
[-- Type: text/plain, Size: 159 bytes --]
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-26 2:42 ` Mr. Teo En Ming (Zhang Enming)
@ 2009-07-26 2:50 ` Mr. Teo En Ming (Zhang Enming)
2009-07-26 5:16 ` Mr. Teo En Ming (Zhang Enming)
0 siblings, 1 reply; 86+ messages in thread
From: Mr. Teo En Ming (Zhang Enming) @ 2009-07-26 2:50 UTC (permalink / raw)
To: enming.teo; +Cc: Sander Eikelenboom, bderzhavets, xen-devel, "Pasi Kr"
[-- Attachment #1.1: Type: text/plain, Size: 37385 bytes --]
At the moment there is only one network card installed on my lab PC in
my company running OpenSUSE 11.1 32-bit with Xen 3.4.1-rc8 Dom 0 kernel
2.6.30-rc6 (jeremy). So when there are more network cards installed,
there will be eth0, eth1, eth2 ethernet bridges, etc.
Then I can assign the virtual network card in each virtual machine to a
specific ethernet network bridge (out of many bridges) in Domain 0 using
the vif command in guest domain configuration.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Mr. Teo En Ming (Zhang Enming) wrote:
> Dear Boris,
>
> The ethernet network bridge on OpenSUSE 11.1 is eth0.
>
> --
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
> Technical Support Engineer
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Republic of Singapore
> Mobile Phone: +65-9648-9798
> MSN: teoenming@hotmail.com
>
> Boris Derzhavets wrote:
>> This means that OSOL installer (by default ) will issue DHCPDISCOVER
>> via your Xen bridge, looking for DHCP server on your LAN. Only on
>> RHEL 5.3
>> (F10 with Xen 3.3.1 src.rpm been installed along with generated
>> packages) with libvirtd & dnsmasq up and running you can specify
>> vif=['bridge=virbr0' ] to detect DHCP Server at your Dom0.
>>
>> View for instance :-
>> http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
>>
>> I don't have any experience with OpenSuse 11.1 . I hardly remind they
>> tried to reproduce RH's technology. Most probably they did it in SLES
>> 11 (not sure). Check for libvirtd&dnsmasq daemons up and running.
>> But if your OpenSuse 11.1 Dom0 is on "dhcp" bridge itself , then no
>> problems. Just vif=['bridge=eth0'].
>>
>> Boris.
>>
>> --- On *Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
>> /<enming.teo@asiasoftsea.net>/* wrote:
>>
>>
>> From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
>> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
>> Jeremy's PVOPS Kernel
>> To: bderzhavets@yahoo.com
>> Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, Pasi
>> Kr@yahoo.com, xen-devel@lists.xensource.com
>> Date: Saturday, July 25, 2009, 12:32 PM
>>
>> Dear Boris,
>>
>> This means I have to install a DHCP server or dnsmasq in my Dom
>> 0, listening on my Dom 0's IP address, so that it can assign
>> dynamic IP addresses to the DomU.
>>
>> By the way, are there any paravirtualized device drivers that I
>> can install in DomU to improve the performance of the virtual
>> machine?
>>
>> Thank you.
>>
>> --
>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
>> Technical Support Engineer
>> Information Technology Department
>> Asiasoft Online Pte Ltd
>> Tampines Central 1 #04-01 Tampines Plaza
>> Singapore 529541
>> Republic of Singapore
>> Mobile Phone: +65-9648-9798
>> MSN: teoenming@hotmail.com
>>
>>
>> Boris Derzhavets wrote:
>>> >I noticed under the guest domain configuration there is a
>>> parameter called >'extra' kernel parameter. Does the 'nowin'
>>> argument stand for no >graphical windows?
>>>
>>> Login as jack/jack to text console.
>>>
>>> Wait until :-
>>>
>>> $ pfexec ifconfig -a
>>>
>>> will show up your IPv4 address
>>>
>>> $ mkdir .vnc
>>> $ cp .Xclients .vnc/xstartup
>>> $ vncserver
>>>
>>> Connect via vncviewer IP-DomU:1 from another terminal session to
>>> OSOL DomU. In case OSOL installer will fail to obtain IP via
>>> DHCPDISCOVER,
>>> let me know. It might happen and requires Solaris Kernel Model
>>> Debugger
>>> to disable checksum offloading at boot up. Seems to be hardware
>>> dependent issue for OSOL 2009.06
>>>
>>> **********************************
>>> Copy ramdisk and kernel to Dom0
>>> **********************************
>>> |
>>> [root@ServerXen isos]# cat copy.sh
>>> mount -o loop,ro osol-0906-x86.iso /mnt
>>> cp /mnt/boot/amd64/x86.microroot /home/boris/solaris
>>> cp /mnt/platform/i86xpv/kernel/amd64/unix /home/boris/solaris
>>> |
>>>
>>>
>>> ***********************
>>> Installation profile:-
>>> ***********************
>>> |
>>> [root@ServerXen solaris]# cat osol200906.install
>>> name = "sol0906"
>>> vcpus = 1
>>> memory = "1024"
>>> kernel = "/home/boris/solaris/unix"
>>> ramdisk = "/home/boris/solaris/x86.microroot"
>>> extra = "/platform/i86xpv/kernel/amd64/unix - nowin -B
>>> install_media=cdrom"
>>> disk = ['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
>>> # Would work as well
>>> # || disk = ['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']|
>>> |vif = ['bridge=eth1']
>>> on_shutdown = "destroy"
>>> on_reboot = "destroy"
>>> on_crash = "destroy"|
>>>
>>> Boris
>>>
>>> --- On *Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
>>> /<enming.teo@asiasoftsea.net>/* wrote:
>>>
>>>
>>> From: Mr. Teo En Ming (Zhang Enming)
>>> <enming.teo@asiasoftsea.net>
>>> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
>>> Jeremy's PVOPS Kernel
>>> To: enming.teo@asiasoftsea.net
>>> Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, "Boris
>>> Derzhavets" <bderzhavets@yahoo.com>,
>>> xen-devel@lists.xensource.com,
>>> =?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
>>> Date: Saturday, July 25, 2009, 7:14 AM
>>>
>>> Dear All,
>>>
>>> I am trying to install OpenSolaris 2009.06 32-bit
>>> paravirtualized guest on OpenSUSE 11.1 32-bit paravirt-ops
>>> enabled Xen 3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6.
>>>
>>> However, I am getting an opensolaris console login prompt.
>>> There is no GNOME DE for me to launch the GUI installer for
>>> OpenSolaris. I am using the OpenSolaris LiveCD 32-bit.
>>>
>>> I noticed under the guest domain configuration there is a
>>> parameter called 'extra' kernel parameter. Does the 'nowin'
>>> argument stand for no graphical windows?
>>>
>>> http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
>>>
>>> http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
>>>
>>> http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
>>>
>>> Then I also get the "invalid disk device number (768)"
>>> error. Do I need to use xvda instead of hda?
>>>
>>> Thank you very much.
>>>
>>> --
>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
>>> Technical Support Engineer
>>> Information Technology Department
>>> Asiasoft Online Pte Ltd
>>> Tampines Central 1 #04-01 Tampines Plaza
>>> Singapore 529541
>>> Republic of Singapore
>>> Mobile Phone: +65-9648-9798
>>> MSN: teoenming@hotmail.com
>>>
>>>
>>>
>>> Teo En Ming wrote:
>>>> As a matter of fact, our servers are either Dell PowerEdge
>>>> 1950/2950 and IBM xSeries.
>>>>
>>>> I am just testing it out on our lab PC first.
>>>>
>>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
>>>> Engineering) BEng(Hons)(Mechanical Engineering)
>>>> Technical Support Engineer
>>>> Information Technology Department
>>>> Asiasoft Online Pte Ltd
>>>> Tampines Central 1 #04-01 Tampines Plaza
>>>> Singapore 529541
>>>> Republic of Singapore
>>>> Mobile Phone: +65-9648-9798
>>>> MSN: teoenming@hotmail.com
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: "Teo En Ming" <enming.teo@asiasoftsea.net>
>>>> To: "Boris Derzhavets" <bderzhavets@yahoo.com>, "Pasi
>>>> Kärkkäinen" <pasik@iki.fi>
>>>> Cc: Sander Eikelenboom <linux@eikelenboom.it>,
>>>> xen-devel@lists.xensource.com
>>>> Date: Sat, 25 Jul 2009 02:27:02 +0800
>>>> Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen
>>>> Dom 0 in Jeremy's PVOPS Kernel
>>>>
>>>> Dear Boris,
>>>>
>>>> My next step will be a 64-bit Xen Dom 0 host.
>>>>
>>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
>>>> Engineering) BEng(Hons)(Mechanical Engineering)
>>>> Technical Support Engineer
>>>> Information Technology Department
>>>> Asiasoft Online Pte Ltd
>>>> Tampines Central 1 #04-01 Tampines Plaza
>>>> Singapore 529541
>>>> Republic of Singapore
>>>> Mobile Phone: +65-9648-9798
>>>> MSN: teoenming@hotmail.com
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: Boris Derzhavets <bderzhavets@yahoo.com>
>>>> To: Pasi Kärkkäinen <pasik@iki.fi>,
>>>> enming.teo@asiasoftsea.net
>>>> Cc: Sander Eikelenboom <linux@eikelenboom.it>,
>>>> xen-devel@lists.xensource.com
>>>> Date: Fri, 24 Jul 2009 10:57:49 -0700 (PDT)
>>>> Subject: Re: Re[8]: [Xen-devel] Unable to Configure
>>>> Xen Dom 0 in Jeremy's PVOPS Kernel
>>>>
>>>> Teo, it is up to you how to manage, if you just
>>>> having fun.
>>>> Otherwise, downloading 64-bit OpenSuse 11.1 ISO image
>>>> takes just 12-14 hr even at slow ADSL speed ( like
>>>> 100 KB/sec).
>>>> Install takes 30 minutes and brings you to the
>>>> trusted results, instead
>>>> of wasting a lot of time in case of business
>>>> environment assignment.
>>>> Pasi has 32-bit experience due to hardware
>>>> limitations, which you don't
>>>> have.
>>>>
>>>> Boris.
>>>>
>>>> --- On *Fri, 7/24/09, Teo En Ming /
>>>> <enming.teo@asiasoftsea.net>/* wrote:
>>>>
>>>>
>>>> From: Teo En Ming <enming.teo@asiasoftsea.net>
>>>> Subject: Re: Re[8]: [Xen-devel] Unable to
>>>> Configure Xen Dom 0 in Jeremy's PVOPS Kernel
>>>> To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
>>>> "Pasi Kärkkäinen" <pasik@iki.fi>
>>>> Cc: "Sander Eikelenboom"
>>>> <linux@eikelenboom.it>,
>>>> xen-devel@lists.xensource.com
>>>> Date: Friday, July 24, 2009, 12:56 PM
>>>>
>>>> Dear Boris,
>>>>
>>>> My colleague installed OpenSUSE 11.1 32-bit on
>>>> the Core 2 Duo machine in our labs. Please see
>>>> my earlier replies in the same topic.
>>>>
>>>> I was too lazy to reformat and install 64-bit
>>>> OpenSUSE, so I proceeded with Xen Dom 0 pvops
>>>> kernel compilation on 32-bit Linux host.
>>>>
>>>> I admit I am getting a lot of headache. Haha.
>>>>
>>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
>>>> Engineering) BEng(Hons)(Mechanical Engineering)
>>>> Technical Support Engineer
>>>> Information Technology Department
>>>> Asiasoft Online Pte Ltd
>>>> Tampines Central 1 #04-01 Tampines Plaza
>>>> Singapore 529541
>>>> Republic of Singapore
>>>> Mobile Phone: +65-9648-9798
>>>> MSN: teoenming@hotmail.com
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: Boris Derzhavets <bderzhavets@yahoo.com>
>>>> To: enming.teo@asiasoftsea.net, Pasi
>>>> Kärkkäinen <pasik@iki.fi>
>>>> Cc: Sander Eikelenboom
>>>> <linux@eikelenboom.it>,
>>>> xen-devel@lists.xensource.com
>>>> Date: Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
>>>> Subject: Re: Re[8]: [Xen-devel] Unable to
>>>> Configure Xen Dom 0 in Jeremy's PVOPS Kernel
>>>>
>>>> Once again, i don't see any reason to to
>>>> run 32-bit OS on Core2Duo,
>>>> unless you like Xen head ache. Core
>>>> development (PVOPS) is obviously
>>>> running in 64-bit environment.
>>>>
>>>> Boris.
>>>>
>>>> --- On *Fri, 7/24/09, Boris Derzhavets /
>>>> <bderzhavets@yahoo.com>/* wrote:
>>>>
>>>>
>>>> From: Boris Derzhavets
>>>> <bderzhavets@yahoo.com>
>>>> Subject: Re: Re[8]: [Xen-devel] Unable
>>>> to Configure Xen Dom 0 in Jeremy's
>>>> PVOPS Kernel
>>>> To: enming.teo@asiasoftsea.net, "Pasi
>>>> Kärkkäinen" <pasik@iki.fi>
>>>> Cc: "Sander Eikelenboom"
>>>> <linux@eikelenboom.it>,
>>>> xen-devel@lists.xensource.com
>>>> Date: Friday, July 24, 2009, 12:47 PM
>>>>
>>>> >After doing the above, I re-installed
>>>> back the Xen hypervisor, libraries and
>>>> tools, and also >the kernel, initrd,
>>>> and modules. Then I proceeded to reboot
>>>> my machine. After rebooting, > my
>>>> CentOS 4.7 32-bit PV guest is still
>>>> able to start and run!
>>>>
>>>> Why it wouldn't ? If your image stays
>>>> the same.
>>>>
>>>> > I am still very puzzled! What causes
>>>> the PV guest initially cannot start?
>>>> Then what >subsequently causes the PV
>>>> guest to suddenly be able to start and
>>>> run???
>>>>
>>>>
>>>> That is not supposed to happen. I would
>>>> suggest clean OS (without any built in
>>>> xen presence) install , followed by
>>>> Xen 3.4.1+pvops kernel clean install.
>>>>
>>>> Boris.
>>>>
>>>> --- On *Fri, 7/24/09, Teo En Ming /
>>>> <enming.teo@asiasoftsea.net>/* wrote:
>>>>
>>>>
>>>> From: Teo En Ming
>>>> <enming.teo@asiasoftsea.net>
>>>> Subject: Re: Re[8]: [Xen-devel]
>>>> Unable to Configure Xen Dom 0 in
>>>> Jeremy's PVOPS Kernel
>>>> To: "Teo En Ming"
>>>> <enming.teo@asiasoftsea.net>, "Pasi
>>>> Kärkkäinen" <pasik@iki.fi>
>>>> Cc: "Sander Eikelenboom"
>>>> <linux@eikelenboom.it>,
>>>> xen-devel@lists.xensource.com
>>>> Date: Friday, July 24, 2009, 12:19 PM
>>>>
>>>> Dear All,
>>>>
>>>> I am very puzzled. In investigating
>>>> the cause of the sudden success of
>>>> the CentOS 4.7 32-bit PV guest
>>>> being able to run, I have
>>>> uninstalled virt-manager and all of
>>>> its dependencies:
>>>>
>>>> docbook
>>>> python-gtk-vnc
>>>> xen-libs 3.3.1
>>>> scrollkeeper
>>>> xen-tools 3.3.1
>>>> libvirt 0.4.6
>>>> libvirt-python
>>>> vm-install 0.3.24
>>>>
>>>> Then I proceeded to "make
>>>> uninstall" in xen-3.4-testing
>>>> source tree, which also removed my
>>>> self compiled Xen Dom 0 pvops
>>>> enabled kernel, initrd and kernel
>>>> modules.
>>>>
>>>> After doing the above, I
>>>> re-installed back the Xen
>>>> hypervisor, libraries and tools,
>>>> and also the kernel, initrd, and
>>>> modules. Then I proceeded to reboot
>>>> my machine. After rebooting, my
>>>> CentOS 4.7 32-bit PV guest is still
>>>> able to start and run!
>>>>
>>>> I am still very puzzled! What
>>>> causes the PV guest initially
>>>> cannot start? Then what
>>>> subsequently causes the PV guest to
>>>> suddenly be able to start and run???
>>>>
>>>> ***scratches head***
>>>>
>>>> Anyway my CentOS 4.7 guest domain
>>>> is now running. I shall now proceed
>>>> to virtualize OpenSolaris 2009.06.
>>>>
>>>> Thank you.
>>>>
>>>> Also see screenshots of my CentOS
>>>> 4.7 PV guest here:
>>>> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
>>>>
>>>>
>>>> Mr. Teo En Ming (Zhang Enming)
>>>> Dip(Mechatronics Engineering)
>>>> BEng(Hons)(Mechanical Engineering)
>>>> Technical Support Engineer
>>>> Information Technology Department
>>>> Asiasoft Online Pte Ltd
>>>> Tampines Central 1 #04-01 Tampines
>>>> Plaza
>>>> Singapore 529541
>>>> Republic of Singapore
>>>> Mobile Phone: +65-9648-9798
>>>> MSN: teoenming@hotmail.com
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: "Teo En Ming"
>>>> <enming.teo@asiasoftsea.net>
>>>> To: "Teo En Ming"
>>>> <enming.teo@asiasoftsea.net>,
>>>> "Pasi Kärkkäinen" <pasik@iki.fi>
>>>> Cc: Sander Eikelenboom
>>>> <linux@eikelenboom.it>,
>>>> xen-devel@lists.xensource.com
>>>> Date: Fri, 24 Jul 2009 22:54:26
>>>> +0800
>>>> Subject: Re: Re[8]: [Xen-devel]
>>>> Unable to Configure Xen Dom 0
>>>> in Jeremy's PVOPS Kernel
>>>>
>>>> Hi Pasi,
>>>>
>>>> It's very strange. Suddenly my
>>>> CentOS 4.7 32-bit PV guest is
>>>> able to start!!! Previously it
>>>> refuses to start at all.
>>>>
>>>> I think I must have changed
>>>> something in Dom 0 when I
>>>> attempted "yast --install
>>>> virt-manager". This action
>>>> might have solved the problem.
>>>> When I tried to install
>>>> virt-manager, it also tries to
>>>> install xen-libs-3.3.1 and
>>>> xen-tools-3.3.1 as
>>>> dependencies. However, I
>>>> started off my Xen Dom 0 pvops
>>>> kernel install with Xen 3.4.1
>>>> rc8 branch.
>>>>
>>>> I need to investigate more why
>>>> suddenly my CentOS 4.7 32-bit
>>>> PV guest is able to start.
>>>>
>>>> Mr. Teo En Ming (Zhang Enming)
>>>> Dip(Mechatronics Engineering)
>>>> BEng(Hons)(Mechanical Engineering)
>>>> Technical Support Engineer
>>>> Information Technology Department
>>>> Asiasoft Online Pte Ltd
>>>> Tampines Central 1 #04-01
>>>> Tampines Plaza
>>>> Singapore 529541
>>>> Republic of Singapore
>>>> Mobile Phone: +65-9648-9798
>>>> MSN: teoenming@hotmail.com
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: "Teo En Ming"
>>>> <enming.teo@asiasoftsea.net>
>>>> To: "Pasi Kärkkäinen"
>>>> <pasik@iki.fi>
>>>> Cc: Sander Eikelenboom
>>>> <linux@eikelenboom.it>,
>>>> xen-devel@lists.xensource.com
>>>> Date: Fri, 24 Jul 2009
>>>> 21:54:00 +0800
>>>> Subject: Re: Re[8]:
>>>> [Xen-devel] Unable to
>>>> Configure Xen Dom 0 in
>>>> Jeremy's PVOPS Kernel
>>>>
>>>> Hi Pasi,
>>>>
>>>> I realized that Fedora 10
>>>> 32-bit anaconda installer
>>>> does not install PAE kernel
>>>> after mounting the guest
>>>> disk image file. I mounted
>>>> the guest disk image file
>>>> using losetup and kpartx
>>>> which adds device nodes to
>>>> /dev/mapper. I examined the
>>>> /boot directory after
>>>> mounting the guest disk
>>>> image file and found no PAE
>>>> vmlinuz and initrd.
>>>>
>>>> Still using the mounted
>>>> Fedora 10 32-bit guest disk
>>>> image file, I changed root
>>>> to the guest disk
>>>> filesystems and attempted
>>>> to install the PAE kernel.
>>>> Then I modified menu.lst to
>>>> boot the PAE kernel. After
>>>> modifying the grub
>>>> configuration of the guest
>>>> domain, I un-mounted the
>>>> guest filesystem.
>>>>
>>>> I proceeded to boot the F10
>>>> 32-bit guest, since I
>>>> changed to PAE kernel. It
>>>> is able to boot now (since
>>>> the PAE kernel is
>>>> xen-aware) but then it
>>>> complains cannot mount
>>>> /dev/root. Probably
>>>> something to do with the
>>>> PAE initrd file.
>>>>
>>>>
>>>> Mr. Teo En Ming (Zhang
>>>> Enming) Dip(Mechatronics
>>>> Engineering)
>>>> BEng(Hons)(Mechanical
>>>> Engineering)
>>>> Technical Support Engineer
>>>> Information Technology
>>>> Department
>>>> Asiasoft Online Pte Ltd
>>>> Tampines Central 1 #04-01
>>>> Tampines Plaza
>>>> Singapore 529541
>>>> Republic of Singapore
>>>> Mobile Phone: +65-9648-9798
>>>> MSN: teoenming@hotmail.com
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: Pasi Kärkkäinen
>>>> <pasik@iki.fi>
>>>> To: Teo En Ming
>>>> <enming.teo@asiasoftsea.net>
>>>>
>>>> Cc: Sander Eikelenboom
>>>> <linux@eikelenboom.it>,
>>>> xen-devel@lists.xensource.com
>>>>
>>>> Date: Fri, 24 Jul 2009
>>>> 16:31:19 +0300
>>>> Subject: Re: Re[8]:
>>>> [Xen-devel] Unable to
>>>> Configure Xen Dom 0 in
>>>> Jeremy's PVOPS Kernel
>>>>
>>>> On Fri, Jul 24, 2009 at
>>>> 08:37:09PM +0800, Teo
>>>> En Ming wrote:
>>>> > Hi
>>>> >
>>>> > I attempted to
>>>> install Fedora 10
>>>> 32-bit PV guest using
>>>> >
>>>> images/pxeboot/vmlinuz-PAE
>>>> and
>>>> images/pxeboot/initrd-PAE.img
>>>> from the F10
>>>> > media. The non-PAE
>>>> kernel could not load
>>>> the installer. I
>>>> finished my Fedora
>>>> > 10 32-bit PV guest
>>>> installation but it
>>>> also cannot boot up after
>>>> > installation, same as
>>>> the CentOS 4.7 PV guest
>>>> installation.
>>>> >
>>>>
>>>> Fedora 10 installer has
>>>> a bug, as a default it
>>>> installs non-PAE kernel
>>>> for
>>>> xen domU. You need to
>>>> use a kickstart script
>>>> (like this) to fix it:
>>>> http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
>>>>
>>>>
>>>> The important lines being:
>>>>
>>>> -kernel
>>>> kernel-PAE
>>>>
>>>> (Fedora 10 and Fedora
>>>> 11 default kernels are
>>>> compiled with pv_ops
>>>> Xen domU
>>>> support enabled, so
>>>> there's no need for
>>>> separate kernel-xen
>>>> with these distros).
>>>>
>>>> Fedora 11 doesn't have
>>>> that installer bug, so
>>>> it installs right
>>>> out-of-the-box as Xen
>>>> domU.
>>>>
>>>> What's the error you
>>>> get when you start the
>>>> guest after installation?
>>>> Please paste the "xm
>>>> log" as text.
>>>>
>>>> I don't have any
>>>> problems with CentOS
>>>> 5.3 dom0.
>>>>
>>>> -- Pasi
>>>>
>>>>
>>>> -----Inline Attachment Follows-----
>>>>
>>>> _______________________________________________
>>>>
>>>> Xen-devel mailing list
>>>> Xen-devel@lists.xensource.com
>>>> http://lists.xensource.com/xen-devel
>>>>
>>>>
>>>>
>>>> -----Inline Attachment Follows-----
>>>>
>>>> _______________________________________________
>>>>
>>>> Xen-devel mailing list
>>>> Xen-devel@lists.xensource.com
>>>> http://lists.xensource.com/xen-devel
>>>>
>>>>
>>>>
>>>> -----Inline Attachment Follows-----
>>>>
>>>> _______________________________________________
>>>> Xen-devel mailing list
>>>> Xen-devel@lists.xensource.com
>>>> http://lists.xensource.com/xen-devel
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>> _______________________________________________
>>>> Xen-devel mailing list
>>>> Xen-devel@lists.xensource.com
>>>> http://lists.xensource.com/xen-devel
>>>>
>>>
>>>
>>> -----Inline Attachment Follows-----
>>>
>>>
>>> No virus found in this outgoing message.
>>> Checked by AVG - www.avg.com
>>> Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release
>>> Date: 07/25/09 01:48:00
>>>
>>> -----Inline Attachment Follows-----
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>>
>>
>>
>> -----Inline Attachment Follows-----
>>
>>
>> No virus found in this outgoing message.
>> Checked by AVG - www.avg.com
>> Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date:
>> 07/25/09 01:48:00
>>
>> -----Inline Attachment Follows-----
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> </mc/compose?to=Xen-devel@lists.xensource.com>
>> http://lists.xensource.com/xen-devel
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>
>
> ------------------------------------------------------------------------
>
>
> No virus found in this outgoing message.
> Checked by AVG - www.avg.com
> Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
[-- Attachment #1.2: Type: text/html, Size: 48232 bytes --]
[-- Attachment #2.1: "AVG certification" --]
[-- Type: text/plain, Size: 159 bytes --]
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-26 2:50 ` Mr. Teo En Ming (Zhang Enming)
@ 2009-07-26 5:16 ` Mr. Teo En Ming (Zhang Enming)
0 siblings, 0 replies; 86+ messages in thread
From: Mr. Teo En Ming (Zhang Enming) @ 2009-07-26 5:16 UTC (permalink / raw)
To: enming.teo; +Cc: Sander Eikelenboom, bderzhavets, xen-devel, "Pasi Kr"
[-- Attachment #1.1: Type: text/plain, Size: 39682 bytes --]
Hmmmm, just wondering...
Since I am going to do an install from the CD-ROM/ISO, why do I need to
get an IP address for the DomU unless it's going to be a network
install, e.g. HTTP, FTP, NFS, etc?
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Mr. Teo En Ming (Zhang Enming) wrote:
> At the moment there is only one network card installed on my lab PC in
> my company running OpenSUSE 11.1 32-bit with Xen 3.4.1-rc8 Dom 0
> kernel 2.6.30-rc6 (jeremy). So when there are more network cards
> installed, there will be eth0, eth1, eth2 ethernet bridges, etc.
>
> Then I can assign the virtual network card in each virtual machine to
> a specific ethernet network bridge (out of many bridges) in Domain 0
> using the vif command in guest domain configuration.
>
> --
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
> Technical Support Engineer
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Republic of Singapore
> Mobile Phone: +65-9648-9798
> MSN: teoenming@hotmail.com
>
> Mr. Teo En Ming (Zhang Enming) wrote:
>> Dear Boris,
>>
>> The ethernet network bridge on OpenSUSE 11.1 is eth0.
>>
>> --
>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
>> Technical Support Engineer
>> Information Technology Department
>> Asiasoft Online Pte Ltd
>> Tampines Central 1 #04-01 Tampines Plaza
>> Singapore 529541
>> Republic of Singapore
>> Mobile Phone: +65-9648-9798
>> MSN: teoenming@hotmail.com
>>
>> Boris Derzhavets wrote:
>>> This means that OSOL installer (by default ) will issue DHCPDISCOVER
>>> via your Xen bridge, looking for DHCP server on your LAN. Only on
>>> RHEL 5.3
>>> (F10 with Xen 3.3.1 src.rpm been installed along with generated
>>> packages) with libvirtd & dnsmasq up and running you can specify
>>> vif=['bridge=virbr0' ] to detect DHCP Server at your Dom0.
>>>
>>> View for instance :-
>>> http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
>>>
>>> I don't have any experience with OpenSuse 11.1 . I hardly remind
>>> they tried to reproduce RH's technology. Most probably they did it
>>> in SLES 11 (not sure). Check for libvirtd&dnsmasq daemons up and
>>> running.
>>> But if your OpenSuse 11.1 Dom0 is on "dhcp" bridge itself , then no
>>> problems. Just vif=['bridge=eth0'].
>>>
>>> Boris.
>>>
>>> --- On *Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
>>> /<enming.teo@asiasoftsea.net>/* wrote:
>>>
>>>
>>> From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
>>> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
>>> Jeremy's PVOPS Kernel
>>> To: bderzhavets@yahoo.com
>>> Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, Pasi
>>> Kr@yahoo.com, xen-devel@lists.xensource.com
>>> Date: Saturday, July 25, 2009, 12:32 PM
>>>
>>> Dear Boris,
>>>
>>> This means I have to install a DHCP server or dnsmasq in my Dom
>>> 0, listening on my Dom 0's IP address, so that it can assign
>>> dynamic IP addresses to the DomU.
>>>
>>> By the way, are there any paravirtualized device drivers that I
>>> can install in DomU to improve the performance of the virtual
>>> machine?
>>>
>>> Thank you.
>>>
>>> --
>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
>>> Technical Support Engineer
>>> Information Technology Department
>>> Asiasoft Online Pte Ltd
>>> Tampines Central 1 #04-01 Tampines Plaza
>>> Singapore 529541
>>> Republic of Singapore
>>> Mobile Phone: +65-9648-9798
>>> MSN: teoenming@hotmail.com
>>>
>>>
>>> Boris Derzhavets wrote:
>>>> >I noticed under the guest domain configuration there is a
>>>> parameter called >'extra' kernel parameter. Does the 'nowin'
>>>> argument stand for no >graphical windows?
>>>>
>>>> Login as jack/jack to text console.
>>>>
>>>> Wait until :-
>>>>
>>>> $ pfexec ifconfig -a
>>>>
>>>> will show up your IPv4 address
>>>>
>>>> $ mkdir .vnc
>>>> $ cp .Xclients .vnc/xstartup
>>>> $ vncserver
>>>>
>>>> Connect via vncviewer IP-DomU:1 from another terminal session
>>>> to OSOL DomU. In case OSOL installer will fail to obtain IP via
>>>> DHCPDISCOVER,
>>>> let me know. It might happen and requires Solaris Kernel Model
>>>> Debugger
>>>> to disable checksum offloading at boot up. Seems to be hardware
>>>> dependent issue for OSOL 2009.06
>>>>
>>>> **********************************
>>>> Copy ramdisk and kernel to Dom0
>>>> **********************************
>>>> |
>>>> [root@ServerXen isos]# cat copy.sh
>>>> mount -o loop,ro osol-0906-x86.iso /mnt
>>>> cp /mnt/boot/amd64/x86.microroot /home/boris/solaris
>>>> cp /mnt/platform/i86xpv/kernel/amd64/unix /home/boris/solaris
>>>> |
>>>>
>>>>
>>>> ***********************
>>>> Installation profile:-
>>>> ***********************
>>>> |
>>>> [root@ServerXen solaris]# cat osol200906.install
>>>> name = "sol0906"
>>>> vcpus = 1
>>>> memory = "1024"
>>>> kernel = "/home/boris/solaris/unix"
>>>> ramdisk = "/home/boris/solaris/x86.microroot"
>>>> extra = "/platform/i86xpv/kernel/amd64/unix - nowin -B
>>>> install_media=cdrom"
>>>> disk = ['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
>>>> # Would work as well
>>>> # || disk = ['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']|
>>>> |vif = ['bridge=eth1']
>>>> on_shutdown = "destroy"
>>>> on_reboot = "destroy"
>>>> on_crash = "destroy"|
>>>>
>>>> Boris
>>>>
>>>> --- On *Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
>>>> /<enming.teo@asiasoftsea.net>/* wrote:
>>>>
>>>>
>>>> From: Mr. Teo En Ming (Zhang Enming)
>>>> <enming.teo@asiasoftsea.net>
>>>> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
>>>> Jeremy's PVOPS Kernel
>>>> To: enming.teo@asiasoftsea.net
>>>> Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, "Boris
>>>> Derzhavets" <bderzhavets@yahoo.com>,
>>>> xen-devel@lists.xensource.com,
>>>> =?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
>>>> Date: Saturday, July 25, 2009, 7:14 AM
>>>>
>>>> Dear All,
>>>>
>>>> I am trying to install OpenSolaris 2009.06 32-bit
>>>> paravirtualized guest on OpenSUSE 11.1 32-bit paravirt-ops
>>>> enabled Xen 3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6.
>>>>
>>>> However, I am getting an opensolaris console login prompt.
>>>> There is no GNOME DE for me to launch the GUI installer for
>>>> OpenSolaris. I am using the OpenSolaris LiveCD 32-bit.
>>>>
>>>> I noticed under the guest domain configuration there is a
>>>> parameter called 'extra' kernel parameter. Does the 'nowin'
>>>> argument stand for no graphical windows?
>>>>
>>>> http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
>>>>
>>>> http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
>>>>
>>>> http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
>>>>
>>>> Then I also get the "invalid disk device number (768)"
>>>> error. Do I need to use xvda instead of hda?
>>>>
>>>> Thank you very much.
>>>>
>>>> --
>>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
>>>> Technical Support Engineer
>>>> Information Technology Department
>>>> Asiasoft Online Pte Ltd
>>>> Tampines Central 1 #04-01 Tampines Plaza
>>>> Singapore 529541
>>>> Republic of Singapore
>>>> Mobile Phone: +65-9648-9798
>>>> MSN: teoenming@hotmail.com
>>>>
>>>>
>>>>
>>>> Teo En Ming wrote:
>>>>> As a matter of fact, our servers are either Dell PowerEdge
>>>>> 1950/2950 and IBM xSeries.
>>>>>
>>>>> I am just testing it out on our lab PC first.
>>>>>
>>>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
>>>>> Engineering) BEng(Hons)(Mechanical Engineering)
>>>>> Technical Support Engineer
>>>>> Information Technology Department
>>>>> Asiasoft Online Pte Ltd
>>>>> Tampines Central 1 #04-01 Tampines Plaza
>>>>> Singapore 529541
>>>>> Republic of Singapore
>>>>> Mobile Phone: +65-9648-9798
>>>>> MSN: teoenming@hotmail.com
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: "Teo En Ming" <enming.teo@asiasoftsea.net>
>>>>> To: "Boris Derzhavets" <bderzhavets@yahoo.com>, "Pasi
>>>>> Kärkkäinen" <pasik@iki.fi>
>>>>> Cc: Sander Eikelenboom <linux@eikelenboom.it>,
>>>>> xen-devel@lists.xensource.com
>>>>> Date: Sat, 25 Jul 2009 02:27:02 +0800
>>>>> Subject: Re: Re[8]: [Xen-devel] Unable to Configure
>>>>> Xen Dom 0 in Jeremy's PVOPS Kernel
>>>>>
>>>>> Dear Boris,
>>>>>
>>>>> My next step will be a 64-bit Xen Dom 0 host.
>>>>>
>>>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
>>>>> Engineering) BEng(Hons)(Mechanical Engineering)
>>>>> Technical Support Engineer
>>>>> Information Technology Department
>>>>> Asiasoft Online Pte Ltd
>>>>> Tampines Central 1 #04-01 Tampines Plaza
>>>>> Singapore 529541
>>>>> Republic of Singapore
>>>>> Mobile Phone: +65-9648-9798
>>>>> MSN: teoenming@hotmail.com
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: Boris Derzhavets <bderzhavets@yahoo.com>
>>>>> To: Pasi Kärkkäinen <pasik@iki.fi>,
>>>>> enming.teo@asiasoftsea.net
>>>>> Cc: Sander Eikelenboom <linux@eikelenboom.it>,
>>>>> xen-devel@lists.xensource.com
>>>>> Date: Fri, 24 Jul 2009 10:57:49 -0700 (PDT)
>>>>> Subject: Re: Re[8]: [Xen-devel] Unable to
>>>>> Configure Xen Dom 0 in Jeremy's PVOPS Kernel
>>>>>
>>>>> Teo, it is up to you how to manage, if you just
>>>>> having fun.
>>>>> Otherwise, downloading 64-bit OpenSuse 11.1 ISO image
>>>>> takes just 12-14 hr even at slow ADSL speed ( like
>>>>> 100 KB/sec).
>>>>> Install takes 30 minutes and brings you to the
>>>>> trusted results, instead
>>>>> of wasting a lot of time in case of business
>>>>> environment assignment.
>>>>> Pasi has 32-bit experience due to hardware
>>>>> limitations, which you don't
>>>>> have.
>>>>>
>>>>> Boris.
>>>>>
>>>>> --- On *Fri, 7/24/09, Teo En Ming /
>>>>> <enming.teo@asiasoftsea.net>/* wrote:
>>>>>
>>>>>
>>>>> From: Teo En Ming <enming.teo@asiasoftsea.net>
>>>>> Subject: Re: Re[8]: [Xen-devel] Unable to
>>>>> Configure Xen Dom 0 in Jeremy's PVOPS Kernel
>>>>> To: "Boris Derzhavets"
>>>>> <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
>>>>> <pasik@iki.fi>
>>>>> Cc: "Sander Eikelenboom"
>>>>> <linux@eikelenboom.it>,
>>>>> xen-devel@lists.xensource.com
>>>>> Date: Friday, July 24, 2009, 12:56 PM
>>>>>
>>>>> Dear Boris,
>>>>>
>>>>> My colleague installed OpenSUSE 11.1 32-bit on
>>>>> the Core 2 Duo machine in our labs. Please see
>>>>> my earlier replies in the same topic.
>>>>>
>>>>> I was too lazy to reformat and install 64-bit
>>>>> OpenSUSE, so I proceeded with Xen Dom 0 pvops
>>>>> kernel compilation on 32-bit Linux host.
>>>>>
>>>>> I admit I am getting a lot of headache. Haha.
>>>>>
>>>>> Mr. Teo En Ming (Zhang Enming)
>>>>> Dip(Mechatronics Engineering)
>>>>> BEng(Hons)(Mechanical Engineering)
>>>>> Technical Support Engineer
>>>>> Information Technology Department
>>>>> Asiasoft Online Pte Ltd
>>>>> Tampines Central 1 #04-01 Tampines Plaza
>>>>> Singapore 529541
>>>>> Republic of Singapore
>>>>> Mobile Phone: +65-9648-9798
>>>>> MSN: teoenming@hotmail.com
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: Boris Derzhavets
>>>>> <bderzhavets@yahoo.com>
>>>>> To: enming.teo@asiasoftsea.net, Pasi
>>>>> Kärkkäinen <pasik@iki.fi>
>>>>> Cc: Sander Eikelenboom
>>>>> <linux@eikelenboom.it>,
>>>>> xen-devel@lists.xensource.com
>>>>> Date: Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
>>>>> Subject: Re: Re[8]: [Xen-devel] Unable to
>>>>> Configure Xen Dom 0 in Jeremy's PVOPS Kernel
>>>>>
>>>>> Once again, i don't see any reason to to
>>>>> run 32-bit OS on Core2Duo,
>>>>> unless you like Xen head ache. Core
>>>>> development (PVOPS) is obviously
>>>>> running in 64-bit environment.
>>>>>
>>>>> Boris.
>>>>>
>>>>> --- On *Fri, 7/24/09, Boris Derzhavets /
>>>>> <bderzhavets@yahoo.com>/* wrote:
>>>>>
>>>>>
>>>>> From: Boris Derzhavets
>>>>> <bderzhavets@yahoo.com>
>>>>> Subject: Re: Re[8]: [Xen-devel] Unable
>>>>> to Configure Xen Dom 0 in Jeremy's
>>>>> PVOPS Kernel
>>>>> To: enming.teo@asiasoftsea.net, "Pasi
>>>>> Kärkkäinen" <pasik@iki.fi>
>>>>> Cc: "Sander Eikelenboom"
>>>>> <linux@eikelenboom.it>,
>>>>> xen-devel@lists.xensource.com
>>>>> Date: Friday, July 24, 2009, 12:47 PM
>>>>>
>>>>> >After doing the above, I re-installed
>>>>> back the Xen hypervisor, libraries and
>>>>> tools, and also >the kernel, initrd,
>>>>> and modules. Then I proceeded to
>>>>> reboot my machine. After rebooting, >
>>>>> my CentOS 4.7 32-bit PV guest is still
>>>>> able to start and run!
>>>>>
>>>>> Why it wouldn't ? If your image stays
>>>>> the same.
>>>>>
>>>>> > I am still very puzzled! What causes
>>>>> the PV guest initially cannot start?
>>>>> Then what >subsequently causes the PV
>>>>> guest to suddenly be able to start and
>>>>> run???
>>>>>
>>>>>
>>>>> That is not supposed to happen. I
>>>>> would suggest clean OS (without any
>>>>> built in xen presence) install ,
>>>>> followed by Xen 3.4.1+pvops kernel
>>>>> clean install.
>>>>>
>>>>> Boris.
>>>>>
>>>>> --- On *Fri, 7/24/09, Teo En Ming /
>>>>> <enming.teo@asiasoftsea.net>/* wrote:
>>>>>
>>>>>
>>>>> From: Teo En Ming
>>>>> <enming.teo@asiasoftsea.net>
>>>>> Subject: Re: Re[8]: [Xen-devel]
>>>>> Unable to Configure Xen Dom 0 in
>>>>> Jeremy's PVOPS Kernel
>>>>> To: "Teo En Ming"
>>>>> <enming.teo@asiasoftsea.net>,
>>>>> "Pasi Kärkkäinen" <pasik@iki.fi>
>>>>> Cc: "Sander Eikelenboom"
>>>>> <linux@eikelenboom.it>,
>>>>> xen-devel@lists.xensource.com
>>>>> Date: Friday, July 24, 2009, 12:19 PM
>>>>>
>>>>> Dear All,
>>>>>
>>>>> I am very puzzled. In
>>>>> investigating the cause of the
>>>>> sudden success of the CentOS 4.7
>>>>> 32-bit PV guest being able to run,
>>>>> I have uninstalled virt-manager
>>>>> and all of its dependencies:
>>>>>
>>>>> docbook
>>>>> python-gtk-vnc
>>>>> xen-libs 3.3.1
>>>>> scrollkeeper
>>>>> xen-tools 3.3.1
>>>>> libvirt 0.4.6
>>>>> libvirt-python
>>>>> vm-install 0.3.24
>>>>>
>>>>> Then I proceeded to "make
>>>>> uninstall" in xen-3.4-testing
>>>>> source tree, which also removed my
>>>>> self compiled Xen Dom 0 pvops
>>>>> enabled kernel, initrd and kernel
>>>>> modules.
>>>>>
>>>>> After doing the above, I
>>>>> re-installed back the Xen
>>>>> hypervisor, libraries and tools,
>>>>> and also the kernel, initrd, and
>>>>> modules. Then I proceeded to
>>>>> reboot my machine. After
>>>>> rebooting, my CentOS 4.7 32-bit PV
>>>>> guest is still able to start and run!
>>>>>
>>>>> I am still very puzzled! What
>>>>> causes the PV guest initially
>>>>> cannot start? Then what
>>>>> subsequently causes the PV guest
>>>>> to suddenly be able to start and
>>>>> run???
>>>>>
>>>>> ***scratches head***
>>>>>
>>>>> Anyway my CentOS 4.7 guest domain
>>>>> is now running. I shall now
>>>>> proceed to virtualize OpenSolaris
>>>>> 2009.06.
>>>>>
>>>>> Thank you.
>>>>>
>>>>> Also see screenshots of my CentOS
>>>>> 4.7 PV guest here:
>>>>> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
>>>>>
>>>>>
>>>>> Mr. Teo En Ming (Zhang Enming)
>>>>> Dip(Mechatronics Engineering)
>>>>> BEng(Hons)(Mechanical Engineering)
>>>>> Technical Support Engineer
>>>>> Information Technology Department
>>>>> Asiasoft Online Pte Ltd
>>>>> Tampines Central 1 #04-01 Tampines
>>>>> Plaza
>>>>> Singapore 529541
>>>>> Republic of Singapore
>>>>> Mobile Phone: +65-9648-9798
>>>>> MSN: teoenming@hotmail.com
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: "Teo En Ming"
>>>>> <enming.teo@asiasoftsea.net>
>>>>> To: "Teo En Ming"
>>>>> <enming.teo@asiasoftsea.net>,
>>>>> "Pasi Kärkkäinen" <pasik@iki.fi>
>>>>> Cc: Sander Eikelenboom
>>>>> <linux@eikelenboom.it>,
>>>>> xen-devel@lists.xensource.com
>>>>> Date: Fri, 24 Jul 2009
>>>>> 22:54:26 +0800
>>>>> Subject: Re: Re[8]:
>>>>> [Xen-devel] Unable to
>>>>> Configure Xen Dom 0 in
>>>>> Jeremy's PVOPS Kernel
>>>>>
>>>>> Hi Pasi,
>>>>>
>>>>> It's very strange. Suddenly my
>>>>> CentOS 4.7 32-bit PV guest is
>>>>> able to start!!! Previously it
>>>>> refuses to start at all.
>>>>>
>>>>> I think I must have changed
>>>>> something in Dom 0 when I
>>>>> attempted "yast --install
>>>>> virt-manager". This action
>>>>> might have solved the problem.
>>>>> When I tried to install
>>>>> virt-manager, it also tries to
>>>>> install xen-libs-3.3.1 and
>>>>> xen-tools-3.3.1 as
>>>>> dependencies. However, I
>>>>> started off my Xen Dom 0 pvops
>>>>> kernel install with Xen 3.4.1
>>>>> rc8 branch.
>>>>>
>>>>> I need to investigate more why
>>>>> suddenly my CentOS 4.7 32-bit
>>>>> PV guest is able to start.
>>>>>
>>>>> Mr. Teo En Ming (Zhang Enming)
>>>>> Dip(Mechatronics Engineering)
>>>>> BEng(Hons)(Mechanical
>>>>> Engineering)
>>>>> Technical Support Engineer
>>>>> Information Technology Department
>>>>> Asiasoft Online Pte Ltd
>>>>> Tampines Central 1 #04-01
>>>>> Tampines Plaza
>>>>> Singapore 529541
>>>>> Republic of Singapore
>>>>> Mobile Phone: +65-9648-9798
>>>>> MSN: teoenming@hotmail.com
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: "Teo En Ming"
>>>>> <enming.teo@asiasoftsea.net>
>>>>> To: "Pasi Kärkkäinen"
>>>>> <pasik@iki.fi>
>>>>> Cc: Sander Eikelenboom
>>>>> <linux@eikelenboom.it>,
>>>>> xen-devel@lists.xensource.com
>>>>> Date: Fri, 24 Jul 2009
>>>>> 21:54:00 +0800
>>>>> Subject: Re: Re[8]:
>>>>> [Xen-devel] Unable to
>>>>> Configure Xen Dom 0 in
>>>>> Jeremy's PVOPS Kernel
>>>>>
>>>>> Hi Pasi,
>>>>>
>>>>> I realized that Fedora 10
>>>>> 32-bit anaconda installer
>>>>> does not install PAE
>>>>> kernel after mounting the
>>>>> guest disk image file. I
>>>>> mounted the guest disk
>>>>> image file using losetup
>>>>> and kpartx which adds
>>>>> device nodes to
>>>>> /dev/mapper. I examined
>>>>> the /boot directory after
>>>>> mounting the guest disk
>>>>> image file and found no
>>>>> PAE vmlinuz and initrd.
>>>>>
>>>>> Still using the mounted
>>>>> Fedora 10 32-bit guest
>>>>> disk image file, I changed
>>>>> root to the guest disk
>>>>> filesystems and attempted
>>>>> to install the PAE kernel.
>>>>> Then I modified menu.lst
>>>>> to boot the PAE kernel.
>>>>> After modifying the grub
>>>>> configuration of the guest
>>>>> domain, I un-mounted the
>>>>> guest filesystem.
>>>>>
>>>>> I proceeded to boot the
>>>>> F10 32-bit guest, since I
>>>>> changed to PAE kernel. It
>>>>> is able to boot now (since
>>>>> the PAE kernel is
>>>>> xen-aware) but then it
>>>>> complains cannot mount
>>>>> /dev/root. Probably
>>>>> something to do with the
>>>>> PAE initrd file.
>>>>>
>>>>>
>>>>> Mr. Teo En Ming (Zhang
>>>>> Enming) Dip(Mechatronics
>>>>> Engineering)
>>>>> BEng(Hons)(Mechanical
>>>>> Engineering)
>>>>> Technical Support Engineer
>>>>> Information Technology
>>>>> Department
>>>>> Asiasoft Online Pte Ltd
>>>>> Tampines Central 1 #04-01
>>>>> Tampines Plaza
>>>>> Singapore 529541
>>>>> Republic of Singapore
>>>>> Mobile Phone: +65-9648-9798
>>>>> MSN: teoenming@hotmail.com
>>>>>
>>>>>
>>>>> -----Original
>>>>> Message-----
>>>>> From: Pasi Kärkkäinen
>>>>> <pasik@iki.fi>
>>>>> To: Teo En Ming
>>>>> <enming.teo@asiasoftsea.net>
>>>>>
>>>>> Cc: Sander Eikelenboom
>>>>> <linux@eikelenboom.it>,
>>>>> xen-devel@lists.xensource.com
>>>>>
>>>>> Date: Fri, 24 Jul 2009
>>>>> 16:31:19 +0300
>>>>> Subject: Re: Re[8]:
>>>>> [Xen-devel] Unable to
>>>>> Configure Xen Dom 0 in
>>>>> Jeremy's PVOPS Kernel
>>>>>
>>>>> On Fri, Jul 24, 2009
>>>>> at 08:37:09PM +0800,
>>>>> Teo En Ming wrote:
>>>>> > Hi
>>>>> >
>>>>> > I attempted to
>>>>> install Fedora 10
>>>>> 32-bit PV guest using
>>>>> >
>>>>> images/pxeboot/vmlinuz-PAE
>>>>> and
>>>>> images/pxeboot/initrd-PAE.img
>>>>> from the F10
>>>>> > media. The non-PAE
>>>>> kernel could not load
>>>>> the installer. I
>>>>> finished my Fedora
>>>>> > 10 32-bit PV guest
>>>>> installation but it
>>>>> also cannot boot up after
>>>>> > installation, same
>>>>> as the CentOS 4.7 PV
>>>>> guest installation.
>>>>> >
>>>>>
>>>>> Fedora 10 installer
>>>>> has a bug, as a
>>>>> default it installs
>>>>> non-PAE kernel for
>>>>> xen domU. You need to
>>>>> use a kickstart script
>>>>> (like this) to fix it:
>>>>> http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
>>>>>
>>>>>
>>>>> The important lines
>>>>> being:
>>>>>
>>>>> -kernel
>>>>> kernel-PAE
>>>>>
>>>>> (Fedora 10 and Fedora
>>>>> 11 default kernels are
>>>>> compiled with pv_ops
>>>>> Xen domU
>>>>> support enabled, so
>>>>> there's no need for
>>>>> separate kernel-xen
>>>>> with these distros).
>>>>>
>>>>> Fedora 11 doesn't have
>>>>> that installer bug, so
>>>>> it installs right
>>>>> out-of-the-box as Xen
>>>>> domU.
>>>>>
>>>>> What's the error you
>>>>> get when you start the
>>>>> guest after installation?
>>>>> Please paste the "xm
>>>>> log" as text.
>>>>>
>>>>> I don't have any
>>>>> problems with CentOS
>>>>> 5.3 dom0.
>>>>>
>>>>> -- Pasi
>>>>>
>>>>>
>>>>> -----Inline Attachment Follows-----
>>>>>
>>>>> _______________________________________________
>>>>>
>>>>> Xen-devel mailing list
>>>>> Xen-devel@lists.xensource.com
>>>>> http://lists.xensource.com/xen-devel
>>>>>
>>>>>
>>>>>
>>>>> -----Inline Attachment Follows-----
>>>>>
>>>>> _______________________________________________
>>>>>
>>>>> Xen-devel mailing list
>>>>> Xen-devel@lists.xensource.com
>>>>> http://lists.xensource.com/xen-devel
>>>>>
>>>>>
>>>>>
>>>>> -----Inline Attachment Follows-----
>>>>>
>>>>> _______________________________________________
>>>>> Xen-devel mailing list
>>>>> Xen-devel@lists.xensource.com
>>>>> http://lists.xensource.com/xen-devel
>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------
>>>>>
>>>>> _______________________________________________
>>>>> Xen-devel mailing list
>>>>> Xen-devel@lists.xensource.com
>>>>> http://lists.xensource.com/xen-devel
>>>>>
>>>>
>>>>
>>>> -----Inline Attachment Follows-----
>>>>
>>>>
>>>> No virus found in this outgoing message.
>>>> Checked by AVG - www.avg.com
>>>> Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release
>>>> Date: 07/25/09 01:48:00
>>>>
>>>> -----Inline Attachment Follows-----
>>>>
>>>> _______________________________________________
>>>> Xen-devel mailing list
>>>> Xen-devel@lists.xensource.com
>>>> http://lists.xensource.com/xen-devel
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>> _______________________________________________
>>>> Xen-devel mailing list
>>>> Xen-devel@lists.xensource.com
>>>> http://lists.xensource.com/xen-devel
>>>>
>>>
>>>
>>> -----Inline Attachment Follows-----
>>>
>>>
>>> No virus found in this outgoing message.
>>> Checked by AVG - www.avg.com
>>> Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release
>>> Date: 07/25/09 01:48:00
>>>
>>> -----Inline Attachment Follows-----
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> </mc/compose?to=Xen-devel@lists.xensource.com>
>>> http://lists.xensource.com/xen-devel
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>>
>>
>>
>> ------------------------------------------------------------------------
>>
>>
>> No virus found in this outgoing message.
>> Checked by AVG - www.avg.com
>> Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>
> ------------------------------------------------------------------------
>
>
> No virus found in this outgoing message.
> Checked by AVG - www.avg.com
> Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
[-- Attachment #1.2: Type: text/html, Size: 50603 bytes --]
[-- Attachment #2.1: "AVG certification" --]
[-- Type: text/plain, Size: 159 bytes --]
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-26 9:03 Boris Derzhavets
0 siblings, 0 replies; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-26 9:03 UTC (permalink / raw)
To: enming.teo; +Cc: Sander Eikelenboom, "Pasi Kr", xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 35637 bytes --]
The way to obtain IP for DomU address is completely unrelated with installation source.
Boris.
--- On Sun, 7/26/09, Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net> wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, bderzhavets@yahoo.com, xen-devel@lists.xensource.com, Pasi Kr@yahoo.com
Date: Sunday, July 26, 2009, 1:16 AM
Hmmmm, just wondering...
Since I am going to do an install from the CD-ROM/ISO, why do I need to
get an IP address for the DomU unless it's going to be a network
install, e.g. HTTP, FTP, NFS, etc?
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Mr. Teo En Ming (Zhang Enming) wrote:
At the moment there is only one network card installed on my lab PC in
my company running OpenSUSE 11.1 32-bit with Xen 3.4.1-rc8 Dom 0 kernel
2.6.30-rc6 (jeremy). So when there are more network cards installed,
there will be eth0, eth1, eth2 ethernet bridges, etc.
Then I can assign the virtual network card in each virtual machine to a
specific ethernet network bridge (out of many bridges) in Domain 0
using the vif command in guest domain configuration.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Mr. Teo En Ming (Zhang Enming) wrote:
Dear Boris,
The ethernet network bridge on OpenSUSE 11.1 is eth0.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
This means that OSOL installer (by default ) will issue
DHCPDISCOVER via your Xen bridge, looking for DHCP server on your LAN.
Only on RHEL 5.3
(F10 with Xen 3.3.1 src.rpm been installed along with generated
packages) with libvirtd & dnsmasq up and running you can specify
vif=['bridge=virbr0' ] to detect DHCP Server at your Dom0.
View for instance :-
http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
I don't have any experience with OpenSuse 11.1 . I hardly remind they
tried to reproduce RH's technology. Most probably they did it in SLES
11 (not sure). Check for libvirtd&dnsmasq daemons up and running.
But if your OpenSuse 11.1 Dom0 is on "dhcp" bridge itself , then no
problems. Just vif=['bridge=eth0'].
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: bderzhavets@yahoo.com
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
Pasi Kr@yahoo.com, xen-devel@lists.xensource.com
Date: Saturday, July 25, 2009, 12:32 PM
Dear Boris,
This means I have to install a DHCP server or dnsmasq in my Dom 0,
listening on my Dom 0's IP address, so that it can assign dynamic IP
addresses to the DomU.
By the way, are there any paravirtualized device drivers that I can
install in DomU to improve the performance of the virtual machine?
Thank you.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
>I noticed under the guest domain configuration there
is a parameter
called >'extra' kernel parameter. Does the 'nowin' argument stand
for no
>graphical windows?
Login as jack/jack to text console.
Wait until :-
$ pfexec ifconfig -a
will show up your IPv4 address
$ mkdir .vnc
$ cp .Xclients .vnc/xstartup
$ vncserver
Connect via vncviewer IP-DomU:1 from another terminal session to OSOL
DomU. In case OSOL installer will fail to obtain IP via DHCPDISCOVER,
let me know. It might happen and requires Solaris Kernel Model Debugger
to disable checksum offloading at boot up. Seems to be hardware
dependent issue for OSOL 2009.06
**********************************
Copy ramdisk and kernel to Dom0
**********************************
[root@ServerXen isos]# cat copy.sh
mount -o loop,ro osol-0906-x86.iso /mnt
cp /mnt/boot/amd64/x86.microroot /home/boris/solaris
cp /mnt/platform/i86xpv/kernel/amd64/unix /home/boris/solaris
***********************
Installation profile:-
***********************
[root@ServerXen solaris]# cat osol200906.install
name = "sol0906"
vcpus = 1
memory = "1024"
kernel = "/home/boris/solaris/unix"
ramdisk = "/home/boris/solaris/x86.microroot"
extra = "/platform/i86xpv/kernel/amd64/unix - nowin -B
install_media=cdrom"
disk = ['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
# Would work as well
#
disk = ['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']
vif = ['bridge=eth1']
on_shutdown = "destroy"
on_reboot = "destroy"
on_crash = "destroy"
Boris
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
"Boris
Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com,
=?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
Date: Saturday, July 25, 2009, 7:14 AM
Dear All,
I am trying to install OpenSolaris 2009.06 32-bit paravirtualized guest
on OpenSUSE 11.1 32-bit paravirt-ops enabled Xen 3.4.1-rc8 Dom 0 Kernel
2.6.30-rc6.
However, I am getting an opensolaris console login prompt. There is no
GNOME DE for me to launch the GUI installer for OpenSolaris. I am using
the OpenSolaris LiveCD 32-bit.
I noticed under the guest domain configuration there is a parameter
called 'extra' kernel parameter. Does the 'nowin' argument stand for no
graphical windows?
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
Then I also get the "invalid disk device number (768)" error. Do I need
to use xvda instead of hda?
Thank you very much.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo En Ming wrote:
As a matter of fact, our servers are
either
Dell
PowerEdge
1950/2950 and IBM xSeries.
I am just testing it out on our lab PC
first.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics
Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Sat, 25 Jul 2009 02:27:02 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Dear Boris,
My next step will be a 64-bit Xen Dom
0
host.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics
Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: Pasi Kärkkäinen <pasik@iki.fi>, enming.teo@asiasoftsea.net
Cc: Sander Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 10:57:49 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Teo, it is up to you how to manage, if you just having
fun.
Otherwise, downloading 64-bit OpenSuse 11.1 ISO image
takes just 12-14 hr even at slow ADSL speed ( like 100 KB/sec).
Install takes 30 minutes and brings you to the trusted results, instead
of wasting a lot of time in case of business environment assignment.
Pasi has 32-bit experience due to hardware limitations, which you don't
have.
Boris.
--- On Fri, 7/24/09, Teo En Ming <enming.teo@asiasoftsea.net>
wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:56 PM
Dear Boris,
My colleague installed
OpenSUSE
11.1
32-bit on the
Core 2 Duo machine in our labs. Please see my earlier replies in the
same topic.
I was too lazy to reformat
and
install
64-bit
OpenSUSE, so I proceeded with Xen Dom 0 pvops kernel compilation on
32-bit Linux host.
I admit I am getting a lot
of
headache.
Haha.
Mr. Teo En Ming (Zhang
Enming)
Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: enming.teo@asiasoftsea.net,
Pasi Kärkkäinen <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Once again, i don't see any reason to to run 32-bit OS on
Core2Duo,
unless you like Xen head ache. Core development (PVOPS) is obviously
running in 64-bit environment.
Boris.
--- On Fri, 7/24/09, Boris Derzhavets <bderzhavets@yahoo.com>
wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:47 PM
>After doing the
above, I re-installed back the Xen hypervisor, libraries and tools, and
also >the kernel, initrd, and modules. Then I proceeded to reboot my
machine. After rebooting, > my CentOS 4.7 32-bit PV guest is still
able to start and run!
Why it wouldn't ? If your image stays the same.
> I am
still
very
puzzled! What
causes the PV guest initially cannot start? Then what >subsequently
causes the PV guest to suddenly be able to start and run???
That is not supposed to happen. I would suggest clean OS (without any
built in xen presence) install , followed by Xen 3.4.1+pvops kernel
clean install.
Boris.
--- On Fri, 7/24/09, Teo En Ming <enming.teo@asiasoftsea.net>
wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Teo En Ming" <enming.teo@asiasoftsea.net>,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:19 PM
Dear All,
I am very
puzzled. In
investigating the cause of the sudden success of the CentOS 4.7 32-bit
PV guest being able to run, I have uninstalled virt-manager and all of
its dependencies:
docbook
python-gtk-vnc
xen-libs
3.3.1
scrollkeeper
xen-tools
3.3.1
libvirt
0.4.6
libvirt-python
vm-install
0.3.24
Then I
proceeded to
"make
uninstall" in xen-3.4-testing source tree, which also removed my self
compiled Xen Dom 0 pvops enabled kernel, initrd and kernel modules.
After
doing
the above, I
re-installed back the Xen hypervisor, libraries and tools, and also the
kernel, initrd, and modules. Then I proceeded to reboot my machine.
After rebooting, my CentOS 4.7 32-bit PV guest is still able to start
and run!
I am still
very puzzled!
What
causes the PV guest initially cannot start? Then what subsequently
causes the PV guest to suddenly be able to start and run???
***scratches
head***
Anyway my
CentOS 4.7
guest domain
is now running. I shall now proceed to virtualize OpenSolaris 2009.06.
Thank you.
Also see
screenshots of
my CentOS
4.7 PV guest here: http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
Mr. Teo En
Ming (Zhang
Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical
Support
Engineer
Information
Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic
of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Teo En Ming" <enming.teo@asiasoftsea.net>,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 22:54:26 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Hi Pasi,
It's
very
strange.
Suddenly my
CentOS 4.7 32-bit PV guest is able to start!!! Previously it refuses to
start at all.
I think
I
must have
changed
something in Dom 0 when I attempted "yast --install virt-manager". This
action might have solved the problem. When I tried to install
virt-manager, it also tries to install xen-libs-3.3.1 and
xen-tools-3.3.1 as dependencies. However, I started off my Xen Dom 0
pvops kernel install with Xen 3.4.1 rc8 branch.
I need
to
investigate
more why
suddenly my CentOS 4.7 32-bit PV guest is able to start.
Mr. Teo
En
Ming (Zhang
Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical
Support
Engineer
Information
Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic
of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 21:54:00 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Hi
Pasi,
I
realized
that
Fedora 10
32-bit anaconda installer does not install PAE kernel after mounting
the guest disk image file. I mounted the guest disk image file using
losetup and kpartx which adds device nodes to /dev/mapper. I examined
the /boot directory after mounting the guest disk image file and found
no PAE vmlinuz and initrd.
Still
using the
mounted Fedora
10 32-bit guest disk image file, I changed root to the guest disk
filesystems and attempted to install the PAE kernel. Then I modified
menu.lst to boot the PAE kernel. After modifying the grub configuration
of the guest domain, I un-mounted the guest filesystem.
I
proceeded to boot
the F10
32-bit guest, since I changed to PAE kernel. It is able to boot now
(since the PAE kernel is xen-aware) but then it complains cannot mount
/dev/root. Probably something to do with the PAE initrd file.
Mr.
Teo
En
Ming
(Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical
Support
Engineer
Information
Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic
of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming <enming.teo@asiasoftsea.net>
Cc: Sander Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 16:31:19 +0300
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
On Fri, Jul 24,
2009 at 08:37:09PM +0800, Teo En Ming wrote:
> Hi
>
> I attempted to install Fedora 10 32-bit PV guest using
> images/pxeboot/vmlinuz-PAE and images/pxeboot/initrd-PAE.img from
the F10
> media. The non-PAE kernel could not load the installer. I finished
my Fedora
> 10 32-bit PV guest installation but it also cannot boot up after
> installation, same as the CentOS 4.7 PV guest installation.
>
Fedora 10 installer has a bug, as a default it installs non-PAE kernel
for
xen domU. You need to use a kickstart script (like this) to fix it:
http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
The important lines being:
-kernel
kernel-PAE
(Fedora 10 and Fedora 11 default kernels are compiled with pv_ops Xen
domU
support enabled, so there's no need for separate kernel-xen with these
distros).
Fedora 11 doesn't have that installer bug, so it installs right
out-of-the-box as Xen domU.
What's the error you get when you start the guest after installation?
Please paste the "xm log" as text.
I don't have any problems with CentOS 5.3 dom0.
-- Pasi
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date:
07/25/09 01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date:
07/25/09 01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 50399 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
[not found] <295366.71800.qm@web56102.mail.re3.yahoo.com>
@ 2009-07-26 9:08 ` Mr. Teo En Ming (Zhang Enming)
0 siblings, 0 replies; 86+ messages in thread
From: Mr. Teo En Ming (Zhang Enming) @ 2009-07-26 9:08 UTC (permalink / raw)
To: bderzhavets, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 45074 bytes --]
I am using static IP address.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
> Does your OpenSuse 11.1 32-bit has static IP address or it obtain it
> via DHCP ?
> If second option is in place please submit
> # brctl show
>
> Boris.
>
> --- On *Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
> /<enming.teo@asiasoftsea.net>/* wrote:
>
>
> From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> PVOPS Kernel
> To: enming.teo@asiasoftsea.net
> Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
> bderzhavets@yahoo.com, xen-devel@lists.xensource.com, Pasi
> Kr@yahoo.com
> Date: Saturday, July 25, 2009, 10:50 PM
>
> At the moment there is only one network card installed on my lab
> PC in my company running OpenSUSE 11.1 32-bit with Xen 3.4.1-rc8
> Dom 0 kernel 2.6.30-rc6 (jeremy). So when there are more network
> cards installed, there will be eth0, eth1, eth2 ethernet bridges, etc.
>
> Then I can assign the virtual network card in each virtual machine
> to a specific ethernet network bridge (out of many bridges) in
> Domain 0 using the vif command in guest domain configuration.
>
> --
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
> Technical Support Engineer
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Republic of Singapore
> Mobile Phone: +65-9648-9798
> MSN: teoenming@hotmail.com
>
>
> Mr. Teo En Ming (Zhang Enming) wrote:
>> Dear Boris,
>>
>> The ethernet network bridge on OpenSUSE 11.1 is eth0.
>>
>> --
>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
>> Technical Support Engineer
>> Information Technology Department
>> Asiasoft Online Pte Ltd
>> Tampines Central 1 #04-01 Tampines Plaza
>> Singapore 529541
>> Republic of Singapore
>> Mobile Phone: +65-9648-9798
>> MSN: teoenming@hotmail.com
>>
>> Boris Derzhavets wrote:
>>> This means that OSOL installer (by default ) will issue
>>> DHCPDISCOVER via your Xen bridge, looking for DHCP server on
>>> your LAN. Only on RHEL 5.3
>>> (F10 with Xen 3.3.1 src.rpm been installed along with generated
>>> packages) with libvirtd & dnsmasq up and running you can specify
>>> vif=['bridge=virbr0' ] to detect DHCP Server at your Dom0.
>>>
>>> View for instance :-
>>> http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
>>>
>>> I don't have any experience with OpenSuse 11.1 . I hardly remind
>>> they tried to reproduce RH's technology. Most probably they did
>>> it in SLES 11 (not sure). Check for libvirtd&dnsmasq daemons up
>>> and running.
>>> But if your OpenSuse 11.1 Dom0 is on "dhcp" bridge itself , then
>>> no problems. Just vif=['bridge=eth0'].
>>>
>>> Boris.
>>>
>>> --- On *Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
>>> /<enming.teo@asiasoftsea.net>/* wrote:
>>>
>>>
>>> From: Mr. Teo En Ming (Zhang Enming)
>>> <enming.teo@asiasoftsea.net>
>>> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
>>> Jeremy's PVOPS Kernel
>>> To: bderzhavets@yahoo.com
>>> Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, Pasi
>>> Kr@yahoo.com, xen-devel@lists.xensource.com
>>> Date: Saturday, July 25, 2009, 12:32 PM
>>>
>>> Dear Boris,
>>>
>>> This means I have to install a DHCP server or dnsmasq in my
>>> Dom 0, listening on my Dom 0's IP address, so that it can
>>> assign dynamic IP addresses to the DomU.
>>>
>>> By the way, are there any paravirtualized device drivers
>>> that I can install in DomU to improve the performance of the
>>> virtual machine?
>>>
>>> Thank you.
>>>
>>> --
>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
>>> Technical Support Engineer
>>> Information Technology Department
>>> Asiasoft Online Pte Ltd
>>> Tampines Central 1 #04-01 Tampines Plaza
>>> Singapore 529541
>>> Republic of Singapore
>>> Mobile Phone: +65-9648-9798
>>> MSN: teoenming@hotmail.com
>>>
>>>
>>> Boris Derzhavets wrote:
>>>> >I noticed under the guest domain configuration there is a
>>>> parameter called >'extra' kernel parameter. Does the
>>>> 'nowin' argument stand for no >graphical windows?
>>>>
>>>> Login as jack/jack to text console.
>>>>
>>>> Wait until :-
>>>>
>>>> $ pfexec ifconfig -a
>>>>
>>>> will show up your IPv4 address
>>>>
>>>> $ mkdir .vnc
>>>> $ cp .Xclients .vnc/xstartup
>>>> $ vncserver
>>>>
>>>> Connect via vncviewer IP-DomU:1 from another terminal
>>>> session to OSOL DomU. In case OSOL installer will fail to
>>>> obtain IP via DHCPDISCOVER,
>>>> let me know. It might happen and requires Solaris Kernel
>>>> Model Debugger
>>>> to disable checksum offloading at boot up. Seems to be
>>>> hardware dependent issue for OSOL 2009.06
>>>>
>>>> **********************************
>>>> Copy ramdisk and kernel to Dom0
>>>> **********************************
>>>> |
>>>> [root@ServerXen isos]# cat copy.sh
>>>> mount -o loop,ro osol-0906-x86.iso /mnt
>>>> cp /mnt/boot/amd64/x86.microroot /home/boris/solaris
>>>> cp /mnt/platform/i86xpv/kernel/amd64/unix /home/boris/solaris
>>>> |
>>>>
>>>>
>>>> ***********************
>>>> Installation profile:-
>>>> ***********************
>>>> |
>>>> [root@ServerXen solaris]# cat osol200906.install
>>>> name = "sol0906"
>>>> vcpus = 1
>>>> memory = "1024"
>>>> kernel = "/home/boris/solaris/unix"
>>>> ramdisk = "/home/boris/solaris/x86.microroot"
>>>> extra = "/platform/i86xpv/kernel/amd64/unix - nowin -B
>>>> install_media=cdrom"
>>>> disk = ['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
>>>> # Would work as well
>>>> # || disk = ['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']|
>>>> |vif = ['bridge=eth1']
>>>> on_shutdown = "destroy"
>>>> on_reboot = "destroy"
>>>> on_crash = "destroy"|
>>>>
>>>> Boris
>>>>
>>>> --- On *Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
>>>> /<enming.teo@asiasoftsea.net>/* wrote:
>>>>
>>>>
>>>> From: Mr. Teo En Ming (Zhang Enming)
>>>> <enming.teo@asiasoftsea.net>
>>>> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0
>>>> in Jeremy's PVOPS Kernel
>>>> To: enming.teo@asiasoftsea.net
>>>> Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, "Boris
>>>> Derzhavets" <bderzhavets@yahoo.com>,
>>>> xen-devel@lists.xensource.com,
>>>> =?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
>>>> Date: Saturday, July 25, 2009, 7:14 AM
>>>>
>>>> Dear All,
>>>>
>>>> I am trying to install OpenSolaris 2009.06 32-bit
>>>> paravirtualized guest on OpenSUSE 11.1 32-bit
>>>> paravirt-ops enabled Xen 3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6.
>>>>
>>>> However, I am getting an opensolaris console login
>>>> prompt. There is no GNOME DE for me to launch the GUI
>>>> installer for OpenSolaris. I am using the OpenSolaris
>>>> LiveCD 32-bit.
>>>>
>>>> I noticed under the guest domain configuration there is
>>>> a parameter called 'extra' kernel parameter. Does the
>>>> 'nowin' argument stand for no graphical windows?
>>>>
>>>> http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
>>>>
>>>> http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
>>>>
>>>> http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
>>>>
>>>> Then I also get the "invalid disk device number (768)"
>>>> error. Do I need to use xvda instead of hda?
>>>>
>>>> Thank you very much.
>>>>
>>>> --
>>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
>>>> Technical Support Engineer
>>>> Information Technology Department
>>>> Asiasoft Online Pte Ltd
>>>> Tampines Central 1 #04-01 Tampines Plaza
>>>> Singapore 529541
>>>> Republic of Singapore
>>>> Mobile Phone: +65-9648-9798
>>>> MSN: teoenming@hotmail.com
>>>>
>>>>
>>>>
>>>> Teo En Ming wrote:
>>>>> As a matter of fact, our servers are either Dell
>>>>> PowerEdge 1950/2950 and IBM xSeries.
>>>>>
>>>>> I am just testing it out on our lab PC first.
>>>>>
>>>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
>>>>> Engineering) BEng(Hons)(Mechanical Engineering)
>>>>> Technical Support Engineer
>>>>> Information Technology Department
>>>>> Asiasoft Online Pte Ltd
>>>>> Tampines Central 1 #04-01 Tampines Plaza
>>>>> Singapore 529541
>>>>> Republic of Singapore
>>>>> Mobile Phone: +65-9648-9798
>>>>> MSN: teoenming@hotmail.com
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: "Teo En Ming" <enming.teo@asiasoftsea.net>
>>>>> To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
>>>>> "Pasi Kärkkäinen" <pasik@iki.fi>
>>>>> Cc: Sander Eikelenboom <linux@eikelenboom.it>,
>>>>> xen-devel@lists.xensource.com
>>>>> Date: Sat, 25 Jul 2009 02:27:02 +0800
>>>>> Subject: Re: Re[8]: [Xen-devel] Unable to
>>>>> Configure Xen Dom 0 in Jeremy's PVOPS Kernel
>>>>>
>>>>> Dear Boris,
>>>>>
>>>>> My next step will be a 64-bit Xen Dom 0 host.
>>>>>
>>>>> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
>>>>> Engineering) BEng(Hons)(Mechanical Engineering)
>>>>> Technical Support Engineer
>>>>> Information Technology Department
>>>>> Asiasoft Online Pte Ltd
>>>>> Tampines Central 1 #04-01 Tampines Plaza
>>>>> Singapore 529541
>>>>> Republic of Singapore
>>>>> Mobile Phone: +65-9648-9798
>>>>> MSN: teoenming@hotmail.com
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: Boris Derzhavets <bderzhavets@yahoo.com>
>>>>> To: Pasi Kärkkäinen <pasik@iki.fi>,
>>>>> enming.teo@asiasoftsea.net
>>>>> Cc: Sander Eikelenboom <linux@eikelenboom.it>,
>>>>> xen-devel@lists.xensource.com
>>>>> Date: Fri, 24 Jul 2009 10:57:49 -0700 (PDT)
>>>>> Subject: Re: Re[8]: [Xen-devel] Unable to
>>>>> Configure Xen Dom 0 in Jeremy's PVOPS Kernel
>>>>>
>>>>> Teo, it is up to you how to manage, if you
>>>>> just having fun.
>>>>> Otherwise, downloading 64-bit OpenSuse 11.1
>>>>> ISO image
>>>>> takes just 12-14 hr even at slow ADSL speed (
>>>>> like 100 KB/sec).
>>>>> Install takes 30 minutes and brings you to the
>>>>> trusted results, instead
>>>>> of wasting a lot of time in case of business
>>>>> environment assignment.
>>>>> Pasi has 32-bit experience due to hardware
>>>>> limitations, which you don't
>>>>> have.
>>>>>
>>>>> Boris.
>>>>>
>>>>> --- On *Fri, 7/24/09, Teo En Ming /
>>>>> <enming.teo@asiasoftsea.net>/* wrote:
>>>>>
>>>>>
>>>>> From: Teo En Ming
>>>>> <enming.teo@asiasoftsea.net>
>>>>> Subject: Re: Re[8]: [Xen-devel] Unable to
>>>>> Configure Xen Dom 0 in Jeremy's PVOPS Kernel
>>>>> To: "Boris Derzhavets"
>>>>> <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
>>>>> <pasik@iki.fi>
>>>>> Cc: "Sander Eikelenboom"
>>>>> <linux@eikelenboom.it>,
>>>>> xen-devel@lists.xensource.com
>>>>> Date: Friday, July 24, 2009, 12:56 PM
>>>>>
>>>>> Dear Boris,
>>>>>
>>>>> My colleague installed OpenSUSE 11.1
>>>>> 32-bit on the Core 2 Duo machine in our
>>>>> labs. Please see my earlier replies in the
>>>>> same topic.
>>>>>
>>>>> I was too lazy to reformat and install
>>>>> 64-bit OpenSUSE, so I proceeded with Xen
>>>>> Dom 0 pvops kernel compilation on 32-bit
>>>>> Linux host.
>>>>>
>>>>> I admit I am getting a lot of headache. Haha.
>>>>>
>>>>> Mr. Teo En Ming (Zhang Enming)
>>>>> Dip(Mechatronics Engineering)
>>>>> BEng(Hons)(Mechanical Engineering)
>>>>> Technical Support Engineer
>>>>> Information Technology Department
>>>>> Asiasoft Online Pte Ltd
>>>>> Tampines Central 1 #04-01 Tampines Plaza
>>>>> Singapore 529541
>>>>> Republic of Singapore
>>>>> Mobile Phone: +65-9648-9798
>>>>> MSN: teoenming@hotmail.com
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: Boris Derzhavets
>>>>> <bderzhavets@yahoo.com>
>>>>> To: enming.teo@asiasoftsea.net, Pasi
>>>>> Kärkkäinen <pasik@iki.fi>
>>>>> Cc: Sander Eikelenboom
>>>>> <linux@eikelenboom.it>,
>>>>> xen-devel@lists.xensource.com
>>>>> Date: Fri, 24 Jul 2009 09:57:18 -0700
>>>>> (PDT)
>>>>> Subject: Re: Re[8]: [Xen-devel] Unable
>>>>> to Configure Xen Dom 0 in Jeremy's
>>>>> PVOPS Kernel
>>>>>
>>>>> Once again, i don't see any reason to
>>>>> to run 32-bit OS on Core2Duo,
>>>>> unless you like Xen head ache. Core
>>>>> development (PVOPS) is obviously
>>>>> running in 64-bit environment.
>>>>>
>>>>> Boris.
>>>>>
>>>>> --- On *Fri, 7/24/09, Boris Derzhavets
>>>>> / <bderzhavets@yahoo.com>/* wrote:
>>>>>
>>>>>
>>>>> From: Boris Derzhavets
>>>>> <bderzhavets@yahoo.com>
>>>>> Subject: Re: Re[8]: [Xen-devel]
>>>>> Unable to Configure Xen Dom 0 in
>>>>> Jeremy's PVOPS Kernel
>>>>> To: enming.teo@asiasoftsea.net,
>>>>> "Pasi Kärkkäinen" <pasik@iki.fi>
>>>>> Cc: "Sander Eikelenboom"
>>>>> <linux@eikelenboom.it>,
>>>>> xen-devel@lists.xensource.com
>>>>> Date: Friday, July 24, 2009, 12:47 PM
>>>>>
>>>>> >After doing the above, I
>>>>> re-installed back the Xen
>>>>> hypervisor, libraries and tools,
>>>>> and also >the kernel, initrd, and
>>>>> modules. Then I proceeded to
>>>>> reboot my machine. After
>>>>> rebooting, > my CentOS 4.7 32-bit
>>>>> PV guest is still able to start
>>>>> and run!
>>>>>
>>>>> Why it wouldn't ? If your image
>>>>> stays the same.
>>>>>
>>>>> > I am still very puzzled! What
>>>>> causes the PV guest initially
>>>>> cannot start? Then what
>>>>> >subsequently causes the PV guest
>>>>> to suddenly be able to start and
>>>>> run???
>>>>>
>>>>>
>>>>> That is not supposed to happen. I
>>>>> would suggest clean OS (without
>>>>> any built in xen presence) install
>>>>> , followed by Xen 3.4.1+pvops
>>>>> kernel clean install.
>>>>>
>>>>> Boris.
>>>>>
>>>>> --- On *Fri, 7/24/09, Teo En Ming
>>>>> / <enming.teo@asiasoftsea.net>/*
>>>>> wrote:
>>>>>
>>>>>
>>>>> From: Teo En Ming
>>>>> <enming.teo@asiasoftsea.net>
>>>>> Subject: Re: Re[8]:
>>>>> [Xen-devel] Unable to
>>>>> Configure Xen Dom 0 in
>>>>> Jeremy's PVOPS Kernel
>>>>> To: "Teo En Ming"
>>>>> <enming.teo@asiasoftsea.net>,
>>>>> "Pasi Kärkkäinen" <pasik@iki.fi>
>>>>> Cc: "Sander Eikelenboom"
>>>>> <linux@eikelenboom.it>,
>>>>> xen-devel@lists.xensource.com
>>>>> Date: Friday, July 24, 2009,
>>>>> 12:19 PM
>>>>>
>>>>> Dear All,
>>>>>
>>>>> I am very puzzled. In
>>>>> investigating the cause of the
>>>>> sudden success of the CentOS
>>>>> 4.7 32-bit PV guest being able
>>>>> to run, I have uninstalled
>>>>> virt-manager and all of its
>>>>> dependencies:
>>>>>
>>>>> docbook
>>>>> python-gtk-vnc
>>>>> xen-libs 3.3.1
>>>>> scrollkeeper
>>>>> xen-tools 3.3.1
>>>>> libvirt 0.4.6
>>>>> libvirt-python
>>>>> vm-install 0.3.24
>>>>>
>>>>> Then I proceeded to "make
>>>>> uninstall" in xen-3.4-testing
>>>>> source tree, which also
>>>>> removed my self compiled Xen
>>>>> Dom 0 pvops enabled kernel,
>>>>> initrd and kernel modules.
>>>>>
>>>>> After doing the above, I
>>>>> re-installed back the Xen
>>>>> hypervisor, libraries and
>>>>> tools, and also the kernel,
>>>>> initrd, and modules. Then I
>>>>> proceeded to reboot my
>>>>> machine. After rebooting, my
>>>>> CentOS 4.7 32-bit PV guest is
>>>>> still able to start and run!
>>>>>
>>>>> I am still very puzzled! What
>>>>> causes the PV guest initially
>>>>> cannot start? Then what
>>>>> subsequently causes the PV
>>>>> guest to suddenly be able to
>>>>> start and run???
>>>>>
>>>>> ***scratches head***
>>>>>
>>>>> Anyway my CentOS 4.7 guest
>>>>> domain is now running. I shall
>>>>> now proceed to virtualize
>>>>> OpenSolaris 2009.06.
>>>>>
>>>>> Thank you.
>>>>>
>>>>> Also see screenshots of my
>>>>> CentOS 4.7 PV guest here:
>>>>> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
>>>>>
>>>>>
>>>>> Mr. Teo En Ming (Zhang Enming)
>>>>> Dip(Mechatronics Engineering)
>>>>> BEng(Hons)(Mechanical
>>>>> Engineering)
>>>>> Technical Support Engineer
>>>>> Information Technology Department
>>>>> Asiasoft Online Pte Ltd
>>>>> Tampines Central 1 #04-01
>>>>> Tampines Plaza
>>>>> Singapore 529541
>>>>> Republic of Singapore
>>>>> Mobile Phone: +65-9648-9798
>>>>> MSN: teoenming@hotmail.com
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: "Teo En Ming"
>>>>> <enming.teo@asiasoftsea.net>
>>>>> To: "Teo En Ming"
>>>>> <enming.teo@asiasoftsea.net>,
>>>>> "Pasi Kärkkäinen"
>>>>> <pasik@iki.fi>
>>>>> Cc: Sander Eikelenboom
>>>>> <linux@eikelenboom.it>,
>>>>> xen-devel@lists.xensource.com
>>>>> Date: Fri, 24 Jul 2009
>>>>> 22:54:26 +0800
>>>>> Subject: Re: Re[8]:
>>>>> [Xen-devel] Unable to
>>>>> Configure Xen Dom 0 in
>>>>> Jeremy's PVOPS Kernel
>>>>>
>>>>> Hi Pasi,
>>>>>
>>>>> It's very strange.
>>>>> Suddenly my CentOS 4.7
>>>>> 32-bit PV guest is able to
>>>>> start!!! Previously it
>>>>> refuses to start at all.
>>>>>
>>>>> I think I must have
>>>>> changed something in Dom 0
>>>>> when I attempted "yast
>>>>> --install virt-manager".
>>>>> This action might have
>>>>> solved the problem. When I
>>>>> tried to install
>>>>> virt-manager, it also
>>>>> tries to install
>>>>> xen-libs-3.3.1 and
>>>>> xen-tools-3.3.1 as
>>>>> dependencies. However, I
>>>>> started off my Xen Dom 0
>>>>> pvops kernel install with
>>>>> Xen 3.4.1 rc8 branch.
>>>>>
>>>>> I need to investigate more
>>>>> why suddenly my CentOS 4.7
>>>>> 32-bit PV guest is able to
>>>>> start.
>>>>>
>>>>> Mr. Teo En Ming (Zhang
>>>>> Enming) Dip(Mechatronics
>>>>> Engineering)
>>>>> BEng(Hons)(Mechanical
>>>>> Engineering)
>>>>> Technical Support Engineer
>>>>> Information Technology
>>>>> Department
>>>>> Asiasoft Online Pte Ltd
>>>>> Tampines Central 1 #04-01
>>>>> Tampines Plaza
>>>>> Singapore 529541
>>>>> Republic of Singapore
>>>>> Mobile Phone: +65-9648-9798
>>>>> MSN: teoenming@hotmail.com
>>>>>
>>>>>
>>>>> -----Original
>>>>> Message-----
>>>>> From: "Teo En Ming"
>>>>> <enming.teo@asiasoftsea.net>
>>>>>
>>>>> To: "Pasi Kärkkäinen"
>>>>> <pasik@iki.fi>
>>>>> Cc: Sander Eikelenboom
>>>>> <linux@eikelenboom.it>,
>>>>> xen-devel@lists.xensource.com
>>>>>
>>>>> Date: Fri, 24 Jul 2009
>>>>> 21:54:00 +0800
>>>>> Subject: Re: Re[8]:
>>>>> [Xen-devel] Unable to
>>>>> Configure Xen Dom 0 in
>>>>> Jeremy's PVOPS Kernel
>>>>>
>>>>> Hi Pasi,
>>>>>
>>>>> I realized that Fedora
>>>>> 10 32-bit anaconda
>>>>> installer does not
>>>>> install PAE kernel
>>>>> after mounting the
>>>>> guest disk image file.
>>>>> I mounted the guest
>>>>> disk image file using
>>>>> losetup and kpartx
>>>>> which adds device
>>>>> nodes to /dev/mapper.
>>>>> I examined the /boot
>>>>> directory after
>>>>> mounting the guest
>>>>> disk image file and
>>>>> found no PAE vmlinuz
>>>>> and initrd.
>>>>>
>>>>> Still using the
>>>>> mounted Fedora 10
>>>>> 32-bit guest disk
>>>>> image file, I changed
>>>>> root to the guest disk
>>>>> filesystems and
>>>>> attempted to install
>>>>> the PAE kernel. Then I
>>>>> modified menu.lst to
>>>>> boot the PAE kernel.
>>>>> After modifying the
>>>>> grub configuration of
>>>>> the guest domain, I
>>>>> un-mounted the guest
>>>>> filesystem.
>>>>>
>>>>> I proceeded to boot
>>>>> the F10 32-bit guest,
>>>>> since I changed to PAE
>>>>> kernel. It is able to
>>>>> boot now (since the
>>>>> PAE kernel is
>>>>> xen-aware) but then it
>>>>> complains cannot mount
>>>>> /dev/root. Probably
>>>>> something to do with
>>>>> the PAE initrd file.
>>>>>
>>>>>
>>>>> Mr. Teo En Ming (Zhang
>>>>> Enming)
>>>>> Dip(Mechatronics
>>>>> Engineering)
>>>>> BEng(Hons)(Mechanical
>>>>> Engineering)
>>>>> Technical Support
>>>>> Engineer
>>>>> Information Technology
>>>>> Department
>>>>> Asiasoft Online Pte Ltd
>>>>> Tampines Central 1
>>>>> #04-01 Tampines Plaza
>>>>> Singapore 529541
>>>>> Republic of Singapore
>>>>> Mobile Phone:
>>>>> +65-9648-9798
>>>>> MSN:
>>>>> teoenming@hotmail.com
>>>>>
>>>>>
>>>>> -----Original
>>>>> Message-----
>>>>> From: Pasi
>>>>> Kärkkäinen
>>>>> <pasik@iki.fi>
>>>>> To: Teo En Ming
>>>>> <enming.teo@asiasoftsea.net>
>>>>>
>>>>> Cc: Sander
>>>>> Eikelenboom
>>>>> <linux@eikelenboom.it>,
>>>>> xen-devel@lists.xensource.com
>>>>>
>>>>> Date: Fri, 24 Jul
>>>>> 2009 16:31:19 +0300
>>>>> Subject: Re:
>>>>> Re[8]: [Xen-devel]
>>>>> Unable to
>>>>> Configure Xen Dom
>>>>> 0 in Jeremy's
>>>>> PVOPS Kernel
>>>>>
>>>>> On Fri, Jul 24,
>>>>> 2009 at 08:37:09PM
>>>>> +0800, Teo En Ming
>>>>> wrote:
>>>>> > Hi
>>>>> >
>>>>> > I attempted to
>>>>> install Fedora 10
>>>>> 32-bit PV guest using
>>>>> >
>>>>> images/pxeboot/vmlinuz-PAE
>>>>> and
>>>>> images/pxeboot/initrd-PAE.img
>>>>> from the F10
>>>>> > media. The
>>>>> non-PAE kernel
>>>>> could not load the
>>>>> installer. I
>>>>> finished my Fedora
>>>>> > 10 32-bit PV
>>>>> guest installation
>>>>> but it also cannot
>>>>> boot up after
>>>>> > installation,
>>>>> same as the CentOS
>>>>> 4.7 PV guest
>>>>> installation.
>>>>> >
>>>>>
>>>>> Fedora 10
>>>>> installer has a
>>>>> bug, as a default
>>>>> it installs
>>>>> non-PAE kernel for
>>>>> xen domU. You need
>>>>> to use a kickstart
>>>>> script (like this)
>>>>> to fix it:
>>>>> http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
>>>>>
>>>>>
>>>>> The important
>>>>> lines being:
>>>>>
>>>>> -kernel
>>>>> kernel-PAE
>>>>>
>>>>> (Fedora 10 and
>>>>> Fedora 11 default
>>>>> kernels are
>>>>> compiled with
>>>>> pv_ops Xen domU
>>>>> support enabled,
>>>>> so there's no need
>>>>> for separate
>>>>> kernel-xen with
>>>>> these distros).
>>>>>
>>>>> Fedora 11 doesn't
>>>>> have that
>>>>> installer bug, so
>>>>> it installs right
>>>>> out-of-the-box as
>>>>> Xen domU.
>>>>>
>>>>> What's the error
>>>>> you get when you
>>>>> start the guest
>>>>> after installation?
>>>>> Please paste the
>>>>> "xm log" as text.
>>>>>
>>>>> I don't have any
>>>>> problems with
>>>>> CentOS 5.3 dom0.
>>>>>
>>>>> -- Pasi
>>>>>
>>>>>
>>>>> -----Inline Attachment
>>>>> Follows-----
>>>>>
>>>>> _______________________________________________
>>>>>
>>>>> Xen-devel mailing list
>>>>> Xen-devel@lists.xensource.com
>>>>> http://lists.xensource.com/xen-devel
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> -----Inline Attachment Follows-----
>>>>>
>>>>> _______________________________________________
>>>>>
>>>>> Xen-devel mailing list
>>>>> Xen-devel@lists.xensource.com
>>>>> http://lists.xensource.com/xen-devel
>>>>>
>>>>>
>>>>>
>>>>> -----Inline Attachment Follows-----
>>>>>
>>>>> _______________________________________________
>>>>>
>>>>> Xen-devel mailing list
>>>>> Xen-devel@lists.xensource.com
>>>>> http://lists.xensource.com/xen-devel
>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------
>>>>>
>>>>> _______________________________________________
>>>>> Xen-devel mailing list
>>>>> Xen-devel@lists.xensource.com
>>>>> http://lists.xensource.com/xen-devel
>>>>>
>>>>
>>>>
>>>> -----Inline Attachment Follows-----
>>>>
>>>>
>>>> No virus found in this outgoing message.
>>>> Checked by AVG - www.avg.com
>>>> Version: 8.5.392 / Virus Database: 270.13.29/2260 -
>>>> Release Date: 07/25/09 01:48:00
>>>>
>>>> -----Inline Attachment Follows-----
>>>>
>>>> _______________________________________________
>>>> Xen-devel mailing list
>>>> Xen-devel@lists.xensource.com
>>>> http://lists.xensource.com/xen-devel
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>> _______________________________________________
>>>> Xen-devel mailing list
>>>> Xen-devel@lists.xensource.com
>>>> http://lists.xensource.com/xen-devel
>>>>
>>>
>>>
>>> -----Inline Attachment Follows-----
>>>
>>>
>>> No virus found in this outgoing message.
>>> Checked by AVG - www.avg.com
>>> Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release
>>> Date: 07/25/09 01:48:00
>>>
>>> -----Inline Attachment Follows-----
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>>
>>
>>
>> ------------------------------------------------------------------------
>>
>>
>> No virus found in this outgoing message.
>> Checked by AVG - www.avg.com
>> Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>
>
> -----Inline Attachment Follows-----
>
>
> No virus found in this outgoing message.
> Checked by AVG - www.avg.com
> Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date:
> 07/25/09 18:01:00
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> </mc/compose?to=Xen-devel@lists.xensource.com>
> http://lists.xensource.com/xen-devel
>
>
[-- Attachment #1.2: Type: text/html, Size: 55281 bytes --]
[-- Attachment #2.1: "AVG certification" --]
[-- Type: text/plain, Size: 159 bytes --]
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-26 9:30 Boris Derzhavets
0 siblings, 0 replies; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-26 9:30 UTC (permalink / raw)
To: xen-devel, enming.teo
[-- Attachment #1.1: Type: text/plain, Size: 39956 bytes --]
View:-
http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run with static IP:-
pfexec svcadm disable network/physical:nwam && \
pfexec svcadm enable network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0 192.168.1.102 netmask 255.255.255.0 mtu 1492
pfexec ifconfig xnf0 up
pfexec route add default 192.168.1.102
which i can/do @ installer time to use static IP assignements. i just
can't seem to get them to 'stick' or 'be happy' after reboot and xen,
run-time launch.
Use the same commands with the installed system.
To make the settings permanent you also need (Jurgen Keil) :
echo 192.168.1.102 netmask 255.255.255.0 mtu 1492 > /etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 > /etc/defaultrouter
Boris.
--- On Sun, 7/26/09, Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net> wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com, xen-devel@lists.xensource.com
Date: Sunday, July 26, 2009, 5:08 AM
I am using static IP address.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
Does your OpenSuse 11.1 32-bit has static IP address or
it obtain it via DHCP ?
If second option is in place please submit
# brctl show
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
bderzhavets@yahoo.com, xen-devel@lists.xensource.com, Pasi Kr@yahoo.com
Date: Saturday, July 25, 2009, 10:50 PM
At the moment there is only one
network card installed on my lab PC in
my company running OpenSUSE 11.1 32-bit with Xen 3.4.1-rc8 Dom 0 kernel
2.6.30-rc6 (jeremy). So when there are more network cards installed,
there will be eth0, eth1, eth2 ethernet bridges, etc.
Then I can assign the virtual network card in each virtual machine to a
specific ethernet network bridge (out of many bridges) in Domain 0
using the vif command in guest domain configuration.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Mr. Teo En Ming (Zhang Enming) wrote:
Dear Boris,
The ethernet network bridge on OpenSUSE 11.1 is eth0.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
This means that OSOL installer (by default ) will issue
DHCPDISCOVER via your Xen bridge, looking for DHCP server on your LAN.
Only on RHEL 5.3
(F10 with Xen 3.3.1 src.rpm been installed along with generated
packages) with libvirtd & dnsmasq up and running you can specify
vif=['bridge=virbr0' ] to detect DHCP Server at your Dom0.
View for instance :-
http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
I don't have any experience with OpenSuse 11.1 . I hardly remind they
tried to reproduce RH's technology. Most probably they did it in SLES
11 (not sure). Check for libvirtd&dnsmasq daemons up and running.
But if your OpenSuse 11.1 Dom0 is on "dhcp" bridge itself , then no
problems. Just vif=['bridge=eth0'].
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: bderzhavets@yahoo.com
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
Pasi Kr@yahoo.com, xen-devel@lists.xensource.com
Date: Saturday, July 25, 2009, 12:32 PM
Dear Boris,
This means I have to install a DHCP server or dnsmasq in my Dom 0,
listening on my Dom 0's IP address, so that it can assign dynamic IP
addresses to the DomU.
By the way, are there any paravirtualized device drivers that I can
install in DomU to improve the performance of the virtual machine?
Thank you.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
>I noticed under the guest domain configuration there
is a parameter
called >'extra' kernel parameter. Does the 'nowin' argument stand
for no
>graphical windows?
Login as jack/jack to text console.
Wait until :-
$ pfexec ifconfig -a
will show up your IPv4 address
$ mkdir .vnc
$ cp .Xclients .vnc/xstartup
$ vncserver
Connect via vncviewer IP-DomU:1 from another terminal session to OSOL
DomU. In case OSOL installer will fail to obtain IP via DHCPDISCOVER,
let me know. It might happen and requires Solaris Kernel Model Debugger
to disable checksum offloading at boot up. Seems to be hardware
dependent issue for OSOL 2009.06
**********************************
Copy ramdisk and kernel to Dom0
**********************************
[root@ServerXen isos]# cat copy.sh
mount -o loop,ro osol-0906-x86.iso /mnt
cp /mnt/boot/amd64/x86.microroot /home/boris/solaris
cp /mnt/platform/i86xpv/kernel/amd64/unix /home/boris/solaris
***********************
Installation profile:-
***********************
[root@ServerXen solaris]# cat osol200906.install
name = "sol0906"
vcpus = 1
memory = "1024"
kernel = "/home/boris/solaris/unix"
ramdisk = "/home/boris/solaris/x86.microroot"
extra = "/platform/i86xpv/kernel/amd64/unix - nowin -B
install_media=cdrom"
disk = ['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
# Would work as well
#
disk = ['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']
vif = ['bridge=eth1']
on_shutdown = "destroy"
on_reboot = "destroy"
on_crash = "destroy"
Boris
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
"Boris
Derzhavets" <bderzhavets@yahoo.com>, xen-devel@lists.xensource.com,
=?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
Date: Saturday, July 25, 2009, 7:14 AM
Dear All,
I am trying to install OpenSolaris 2009.06 32-bit paravirtualized guest
on OpenSUSE 11.1 32-bit paravirt-ops enabled Xen 3.4.1-rc8 Dom 0 Kernel
2.6.30-rc6.
However, I am getting an opensolaris console login prompt. There is no
GNOME DE for me to launch the GUI installer for OpenSolaris. I am using
the OpenSolaris LiveCD 32-bit.
I noticed under the guest domain configuration there is a parameter
called 'extra' kernel parameter. Does the 'nowin' argument stand for no
graphical windows?
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
Then I also get the "invalid disk device number (768)" error. Do I need
to use xvda instead of hda?
Thank you very much.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo En Ming wrote:
As a matter of fact, our servers
are
either
Dell
PowerEdge
1950/2950 and IBM xSeries.
I am just testing it out on our
lab PC
first.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics
Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Sat, 25 Jul 2009 02:27:02 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Dear Boris,
My next step will be a 64-bit
Xen Dom 0
host.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics
Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: Pasi Kärkkäinen <pasik@iki.fi>, enming.teo@asiasoftsea.net
Cc: Sander Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 10:57:49 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Teo, it is up to you how to manage, if you just having
fun.
Otherwise, downloading 64-bit OpenSuse 11.1 ISO image
takes just 12-14 hr even at slow ADSL speed ( like 100 KB/sec).
Install takes 30 minutes and brings you to the trusted results, instead
of wasting a lot of time in case of business environment assignment.
Pasi has 32-bit experience due to hardware limitations, which you don't
have.
Boris.
--- On Fri, 7/24/09, Teo En Ming <enming.teo@asiasoftsea.net>
wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:56 PM
Dear Boris,
My colleague
installed
OpenSUSE
11.1
32-bit on the
Core 2 Duo machine in our labs. Please see my earlier replies in the
same topic.
I was too lazy to
reformat and
install
64-bit
OpenSUSE, so I proceeded with Xen Dom 0 pvops kernel compilation on
32-bit Linux host.
I admit I am getting
a lot of
headache.
Haha.
Mr. Teo En Ming
(Zhang Enming)
Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support
Engineer
Information
Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: enming.teo@asiasoftsea.net,
Pasi Kärkkäinen <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Once again, i don't see any reason to to run 32-bit OS on
Core2Duo,
unless you like Xen head ache. Core development (PVOPS) is obviously
running in 64-bit environment.
Boris.
--- On Fri, 7/24/09, Boris Derzhavets <bderzhavets@yahoo.com>
wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:47 PM
>After doing the
above, I re-installed back the Xen hypervisor, libraries and tools, and
also >the kernel, initrd, and modules. Then I proceeded to reboot my
machine. After rebooting, > my CentOS 4.7 32-bit PV guest is still
able to start and run!
Why it wouldn't ? If your image stays the same.
>
I am
still
very
puzzled! What
causes the PV guest initially cannot start? Then what >subsequently
causes the PV guest to suddenly be able to start and run???
That is not supposed to happen. I would suggest clean OS (without any
built in xen presence) install , followed by Xen 3.4.1+pvops kernel
clean install.
Boris.
--- On Fri, 7/24/09, Teo En Ming <enming.teo@asiasoftsea.net>
wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Teo En Ming" <enming.teo@asiasoftsea.net>,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:19 PM
Dear
All,
I
am very
puzzled. In
investigating the cause of the sudden success of the CentOS 4.7 32-bit
PV guest being able to run, I have uninstalled virt-manager and all of
its dependencies:
docbook
python-gtk-vnc
xen-libs
3.3.1
scrollkeeper
xen-tools
3.3.1
libvirt
0.4.6
libvirt-python
vm-install
0.3.24
Then
I
proceeded to
"make
uninstall" in xen-3.4-testing source tree, which also removed my self
compiled Xen Dom 0 pvops enabled kernel, initrd and kernel modules.
After
doing
the above, I
re-installed back the Xen hypervisor, libraries and tools, and also the
kernel, initrd, and modules. Then I proceeded to reboot my machine.
After rebooting, my CentOS 4.7 32-bit PV guest is still able to start
and run!
I
am still
very puzzled!
What
causes the PV guest initially cannot start? Then what subsequently
causes the PV guest to suddenly be able to start and run???
***scratches
head***
Anyway
my
CentOS 4.7
guest domain
is now running. I shall now proceed to virtualize OpenSolaris 2009.06.
Thank
you.
Also
see
screenshots of
my CentOS
4.7 PV guest here: http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
Mr.
Teo En
Ming (Zhang
Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical
Support
Engineer
Information
Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic
of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Teo En Ming" <enming.teo@asiasoftsea.net>,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 22:54:26 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Hi
Pasi,
It's
very
strange.
Suddenly my
CentOS 4.7 32-bit PV guest is able to start!!! Previously it refuses to
start at all.
I
think I
must have
changed
something in Dom 0 when I attempted "yast --install virt-manager". This
action might have solved the problem. When I tried to install
virt-manager, it also tries to install xen-libs-3.3.1 and
xen-tools-3.3.1 as dependencies. However, I started off my Xen Dom 0
pvops kernel install with Xen 3.4.1 rc8 branch.
I
need to
investigate
more why
suddenly my CentOS 4.7 32-bit PV guest is able to start.
Mr.
Teo En
Ming (Zhang
Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical
Support
Engineer
Information
Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic
of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 21:54:00 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Hi
Pasi,
I
realized
that
Fedora 10
32-bit anaconda installer does not install PAE kernel after mounting
the guest disk image file. I mounted the guest disk image file using
losetup and kpartx which adds device nodes to /dev/mapper. I examined
the /boot directory after mounting the guest disk image file and found
no PAE vmlinuz and initrd.
Still
using the
mounted Fedora
10 32-bit guest disk image file, I changed root to the guest disk
filesystems and attempted to install the PAE kernel. Then I modified
menu.lst to boot the PAE kernel. After modifying the grub configuration
of the guest domain, I un-mounted the guest filesystem.
I
proceeded to boot
the F10
32-bit guest, since I changed to PAE kernel. It is able to boot now
(since the PAE kernel is xen-aware) but then it complains cannot mount
/dev/root. Probably something to do with the PAE initrd file.
Mr.
Teo
En
Ming
(Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical
Support
Engineer
Information
Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic
of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming <enming.teo@asiasoftsea.net>
Cc: Sander Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 16:31:19 +0300
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
On Fri, Jul 24,
2009 at 08:37:09PM +0800, Teo En Ming wrote:
> Hi
>
> I attempted to install Fedora 10 32-bit PV guest using
> images/pxeboot/vmlinuz-PAE and images/pxeboot/initrd-PAE.img from
the F10
> media. The non-PAE kernel could not load the installer. I finished
my Fedora
> 10 32-bit PV guest installation but it also cannot boot up after
> installation, same as the CentOS 4.7 PV guest installation.
>
Fedora 10 installer has a bug, as a default it installs non-PAE kernel
for
xen domU. You need to use a kickstart script (like this) to fix it:
http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
The important lines being:
-kernel
kernel-PAE
(Fedora 10 and Fedora 11 default kernels are compiled with pv_ops Xen
domU
support enabled, so there's no need for separate kernel-xen with these
distros).
Fedora 11 doesn't have that installer bug, so it installs right
out-of-the-box as Xen domU.
What's the error you get when you start the guest after installation?
Please paste the "xm log" as text.
I don't have any problems with CentOS 5.3 dom0.
-- Pasi
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date:
07/25/09 01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date:
07/25/09 01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date:
07/25/09 18:01:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
[-- Attachment #1.2: Type: text/html, Size: 54945 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-27 5:01 Boris Derzhavets
@ 2009-07-27 4:58 ` Teo En Ming
0 siblings, 0 replies; 86+ messages in thread
From: Teo En Ming @ 2009-07-27 4:58 UTC (permalink / raw)
To: Boris Derzhavets, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 32316 bytes --]
Dear Boris,
I have changed my opensolaris vm configuration. Please see
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIVtghCI/AAAAAAAAAGE/ZGkYbBhhx5w/s1600-h/01.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIDWV0RI/AAAAAAAAAF8/aP9riPOEZyk/s1600-h/02.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHzY3WCI/AAAAAAAAAF0/gFxy7zJZXi8/s1600-h/03.jpeg
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHm0RO8I/AAAAAAAAAFs/hIgei-yTbx4/s1600-h/04.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHcUoQ_I/AAAAAAAAAFk/9AiZKPqmG80/s1600-h/05.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/Sm0zdXRfyuI/AAAAAAAAAGM/ZqOaIbmTzB8/s1600-h/06.jpeg
I see my OpenSolaris guest sending DHCPDISCOVER and my OpenSUSE 11.1 32-bit
Dom 0 Xen host sending DHCPOFFER but the OpenSolaris virtual machine is not
setting the offered dynamic IP address to it's virtual NIC.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Boris Derzhavets" <bderzhavets@yahoo.com>
To: <xen-devel@lists.xensource.com>, <enming.teo@asiasoftsea.net>
Date: Mon, 27 Jul 2009 13:01:54 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
View:-
http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run with static IP:-
pfexec svcadm disable network/physical:nwam && \
pfexec svcadm enable network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0 192.168.1.102 netmask 255.255.255.0 mtu 1492
pfexec ifconfig xnf0 up
pfexec route add default 192.168.1.102
which i can/do @ installer time to use static IP assignements. i just
can't seem to get them to 'stick' or 'be happy' after reboot and xen,
run-time launch.
Use the same commands with the installed system.
To make the settings permanent you also need (Jurgen Keil) :
echo 192.168.1.102 netmask 255.255.255.0 mtu 1492 > /etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 > /etc/defaultrouter
Boris.
--- On Sun, 7/26/09, Mr. Teo En Ming (Zhang
Enming) <enming.teo@asiasoftsea.net>
wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
To: bderzhavets@yahoo.com, xen-devel@lists.xensource.com
Date: Sunday, July 26, 2009, 5:08 AM
I am using static IP
address.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
[https://mail.asiasoftsea.net/mc/compose?to=teoenming@hotmail.com]
Boris Derzhavets wrote:
Does your OpenSuse 11.1 32-bit has static IP address
or it obtain it via DHCP ?
If second option is in place please submit
# brctl show
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming
(Zhang Enming) <enming.teo@asiasoftsea.net>
[https://mail.asiasoftsea.net/mc/compose?to=enming.teo@asiasoftsea.net]
wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
[https://mail.asiasoftsea.net/mc/compose?to=enming.teo@asiasoftsea.net]
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
To: enming.teo@asiasoftsea.net
[https://mail.asiasoftsea.net/mc/compose?to=enming.teo@asiasoftsea.net]
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>
[https://mail.asiasoftsea.net/mc/compose?to=linux@eikelenboom.it],
bderzhavets@yahoo.com
[https://mail.asiasoftsea.net/mc/compose?to=bderzhavets@yahoo.com],
xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=xen-devel@lists.xensource.com],
Pasi Kr@yahoo.com
[https://mail.asiasoftsea.net/mc/compose?to=Kr@yahoo.com]
Date: Saturday, July 25, 2009, 10:50 PM
At the moment there is only
one network card installed on my lab PC in my company running OpenSUSE
11.1
32-bit with Xen 3.4.1-rc8 Dom 0 kernel 2.6.30-rc6 (jeremy). So when
there
are more network cards installed, there will be eth0, eth1, eth2
ethernet
bridges, etc.
Then I can assign the virtual network card in each virtual machine to a
specific ethernet network bridge (out of many bridges) in Domain 0 using
the vif command in guest domain configuration.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Mr. Teo En Ming (Zhang Enming) wrote:
Dear Boris,
The ethernet network bridge on OpenSUSE 11.1 is eth0.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
This means that OSOL installer (by default ) will
issue DHCPDISCOVER via your Xen bridge, looking for DHCP server on
your
LAN. Only on RHEL 5.3
(F10 with Xen 3.3.1 src.rpm been installed along with generated
packages)
with libvirtd & dnsmasq up and running you can specify
vif=['bridge=virbr0' ] to detect DHCP Server at your Dom0.
View for instance :-
http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
[http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/]
I don't have any experience with OpenSuse 11.1 . I hardly remind they
tried to reproduce RH's technology. Most probably they did it in SLES
11
(not sure). Check for libvirtd&dnsmasq daemons up and running.
But if your OpenSuse 11.1 Dom0 is on "dhcp" bridge itself ,
then no problems. Just vif=['bridge=eth0'].
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming
(Zhang Enming) <enming.teo@asiasoftsea.net>
wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS
Kernel
To: bderzhavets@yahoo.com
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, Pasi
Kr@yahoo.com, xen-devel@lists.xensource.com
Date: Saturday, July 25, 2009, 12:32 PM
Dear Boris,
This means I have to install a DHCP server or dnsmasq in my Dom 0,
listening on my Dom 0's IP address, so that it can assign dynamic IP
addresses to the DomU.
By the way, are there any paravirtualized device drivers that I can
install in DomU to improve the performance of the virtual machine?
Thank you.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
>I noticed under the guest domain
configuration there is a parameter called >'extra' kernel parameter.
Does the 'nowin' argument stand for no >graphical windows?
Login as jack/jack to text console.
Wait until :-
$ pfexec ifconfig -a
will show up your IPv4 address
$ mkdir .vnc
$ cp .Xclients .vnc/xstartup
$ vncserver
Connect via vncviewer IP-DomU:1 from another terminal session to
OSOL
DomU. In case OSOL installer will fail to obtain IP via
DHCPDISCOVER,
let me know. It might happen and requires Solaris Kernel Model
Debugger
to disable checksum offloading at boot up. Seems to be hardware
dependent issue for OSOL 2009.06
**********************************
Copy ramdisk and kernel to Dom0
**********************************[root@ServerXen isos]# cat copy.sh
mount -o loop,ro osol-0906-x86.iso /mnt
cp /mnt/boot/amd64/x86.microroot
/home/boris/solaris
cp
/mnt/platform/i86xpv/kernel/amd64/unix
/home/boris/solaris***********************
Installation profile:-
***********************[root@ServerXen solaris]# cat
osol200906.install
name = "sol0906"
vcpus = 1
memory = "1024"
kernel = "/home/boris/solaris/unix"
ramdisk =
"/home/boris/solaris/x86.microroot"
extra =
"/platform/i86xpv/kernel/amd64/unix - nowin -B
install_media=cdrom"
disk =
['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
# Would work as well
# disk =
['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']vif =
['bridge=eth1']on_shutdown = "destroy"
on_reboot = "destroy"
on_crash = "destroy"Boris
--- On Sat, 7/25/09, Mr. Teo En Ming
(Zhang Enming) <enming.teo@asiasoftsea.net>
wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
"Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com, =?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
Date: Saturday, July 25, 2009, 7:14 AM
Dear
All,
I am trying to install OpenSolaris 2009.06 32-bit paravirtualized
guest
on OpenSUSE 11.1 32-bit paravirt-ops enabled Xen 3.4.1-rc8 Dom 0
Kernel
2.6.30-rc6.
However, I am getting an opensolaris console login prompt. There is
no
GNOME DE for me to launch the GUI installer for OpenSolaris. I am
using
the OpenSolaris LiveCD 32-bit.
I noticed under the guest domain configuration there is a parameter
called 'extra' kernel parameter. Does the 'nowin' argument stand for
no
graphical windows?
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
[http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg]
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
[http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg]
http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
[http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg]
Then I also get the "invalid disk device number (768)" error.
Do I need to use xvda instead of hda?
Thank you very much.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo En Ming wrote:
As a matter of fact, our servers are either
Dell PowerEdge 1950/2950 and IBM xSeries.
I am just testing it out on our lab PC
first.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore
529541
Republicof Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Sat, 25 Jul 2009 02:27:02 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Dear Boris,
My next step will be a 64-bit Xen Dom 0
host.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore
529541
Republicof Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: Pasi Kärkkäinen <pasik@iki.fi>, enming.teo@asiasoftsea.net
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 10:57:49 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Teo, it is up to you how to manage, if
you just having fun.
Otherwise, downloading 64-bit OpenSuse 11.1 ISO image
takes just 12-14 hr even at slow ADSL speed ( like 100 KB/sec).
Install takes 30 minutes and brings you to the trusted results,
instead
of wasting a lot of time in case of business environment
assignment.
Pasi has 32-bit experience due to hardware limitations, which you
don't
have.
Boris.
--- On Fri, 7/24/09, Teo En Ming <enming.teo@asiasoftsea.net>
wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:56 PM
Dear Boris,
My colleague installed OpenSUSE 11.1
32-bit on the Core 2 Duo machine in our labs. Please see my
earlier
replies in the same topic.
I was too lazy to reformat and install
64-bit OpenSUSE, so I proceeded with Xen Dom 0 pvops kernel
compilation on 32-bit Linux host.
I admit I am getting a lot of headache.
Haha.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore
529541
Republicof Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: enming.teo@asiasoftsea.net,
Pasi Kärkkäinen <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Once again, i don't
see any reason to to run 32-bit OS on Core2Duo,
unless you like Xen head ache. Core development (PVOPS) is
obviously
running in 64-bit environment.
Boris.
--- On Fri, 7/24/09, Boris
Derzhavets <bderzhavets@yahoo.com>
wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:47 PM
>After
doing the above, I re-installed back the Xen hypervisor,
libraries and tools, and also >the kernel, initrd, and
modules. Then I proceeded to reboot my machine. After
rebooting,
> my CentOS 4.7 32-bit PV guest is still able to start and
run!Why it wouldn't ? If your image stays the same.
> I am still very
puzzled! What causes the PV guest initially cannot start? Then
what >subsequently causes the PV guest to suddenly be able to
start and run???
That is not supposed to happen. I would suggest clean OS (without
any built in xen presence) install , followed by Xen
3.4.1+pvops kernel clean install.
Boris.
--- On Fri, 7/24/09, Teo En
Ming <enming.teo@asiasoftsea.net>
wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0
in
Jeremy's PVOPS Kernel
To: "Teo En Ming" <enming.teo@asiasoftsea.net>,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:19 PM
Dear All,
I am very puzzled.
In investigating the cause of the sudden success of the CentOS
4.7 32-bit PV guest being able to run, I have uninstalled
virt-manager and all of its dependencies:
docbook
python-gtk-vnc
xen-libs 3.3.1
scrollkeeper
xen-tools 3.3.1
libvirt 0.4.6
libvirt-python
vm-install 0.3.24
Then I proceeded to
"make uninstall" in xen-3.4-testing source tree, which
also removed my self compiled Xen Dom 0 pvops enabled kernel,
initrd and kernel modules.
After doing the
above, I re-installed back the Xen hypervisor, libraries and
tools, and also the kernel, initrd, and modules. Then I
proceeded
to reboot my machine. After rebooting, my CentOS 4.7 32-bit PV
guest is still able to start and run!
I am still very
puzzled! What causes the PV guest initially cannot start? Then
what subsequently causes the PV guest to suddenly be able to
start and run???
***scratches head***
Anyway my CentOS 4.7
guest domain is now running. I shall now proceed to virtualize
OpenSolaris 2009.06.
Thank you.
Also see screenshots
of my CentOS 4.7 PV guest here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html]
Mr. Teo En Ming
(Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support
Engineer
Information
Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore
529541
Republicof Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Teo En Ming" <enming.teo@asiasoftsea.net>,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 22:54:26 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0
in
Jeremy's PVOPS Kernel
Hi Pasi,
It's very strange.
Suddenly my CentOS 4.7 32-bit PV guest is able to start!!!
Previously it refuses to start at all.
I think I must have
changed something in Dom 0 when I attempted "yast --install
virt-manager". This action might have solved the problem.
When I tried to install virt-manager, it also tries to install
xen-libs-3.3.1 and xen-tools-3.3.1 as dependencies. However, I
started off my Xen Dom 0 pvops kernel install with Xen 3.4.1
rc8
branch.
I need to
investigate more why suddenly my CentOS 4.7 32-bit PV guest is
able to start.
Mr. Teo En Ming
(Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support
Engineer
Information
Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore
529541
Republicof Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 21:54:00 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0
in
Jeremy's PVOPS Kernel
Hi Pasi,
I realized that
Fedora 10 32-bit anaconda installer does not install PAE
kernel
after mounting the guest disk image file. I mounted the guest
disk image file using losetup and kpartx which adds device
nodes
to /dev/mapper. I examined the /boot directory after mounting
the
guest disk image file and found no PAE vmlinuz and initrd.
Still using the
mounted Fedora 10 32-bit guest disk image file, I changed root
to
the guest disk filesystems and attempted to install the PAE
kernel. Then I modified menu.lst to boot the PAE kernel. After
modifying the grub configuration of the guest domain, I
un-mounted the guest filesystem.
I proceeded to boot
the F10 32-bit guest, since I changed to PAE kernel. It is
able
to boot now (since the PAE kernel is xen-aware) but then it
complains cannot mount /dev/root. Probably something to do
with
the PAE initrd file.
Mr. Teo En Ming
(Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support
Engineer
Information
Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore
529541
Republicof Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming <enming.teo@asiasoftsea.net>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 16:31:19 +0300
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0
in
Jeremy's PVOPS Kernel
On Fri, Jul
24, 2009 at 08:37:09PM +0800, Teo En Ming wrote:
> Hi
>
> I attempted to install Fedora 10 32-bit PV guest using
> images/pxeboot/vmlinuz-PAE and images/pxeboot/initrd-PAE.img
from the F10
> media. The non-PAE kernel could not load the installer. I
finished my Fedora
> 10 32-bit PV guest installation but it also cannot boot up
after
> installation, same as the CentOS 4.7 PV guest installation.
>
Fedora 10 installer has a bug, as a default it installs
non-PAE
kernel for
xen domU. You need to use a kickstart script (like this) to
fix
it:
http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
[http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg]
The important lines being:
-kernel
kernel-PAE
(Fedora 10 and Fedora 11 default kernels are compiled with
pv_ops
Xen domU
support enabled, so there's no need for separate kernel-xen
with
these distros).
Fedora 11 doesn't have that installer bug, so it installs
right
out-of-the-box as Xen domU.
What's the error you get when you start the guest after
installation?
Please paste the "xm log" as text.
I don't have any problems with CentOS 5.3 dom0.
-- Pasi
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date:
07/25/09 01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date:
07/25/09 01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
No virus found in this outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09
18:01:00_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date:
07/25/09
18:01:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09
18:01:00
No
virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.13.24/2255 - Release Date: 07/22/09
18:00:00
[-- Attachment #1.2: Type: text/html, Size: 100605 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-27 5:01 Boris Derzhavets
2009-07-27 4:58 ` Teo En Ming
0 siblings, 1 reply; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-27 5:01 UTC (permalink / raw)
To: xen-devel, enming.teo
[-- Attachment #1.1: Type: text/plain, Size: 23348 bytes --]
View:-
http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run with static IP:-
pfexec svcadm disable network/physical:nwam && \
pfexec svcadm enable network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0 192.168.1.102 netmask 255.255.255.0 mtu 1492
pfexec ifconfig xnf0 up
pfexec route add default 192.168.1.102
which i can/do @ installer time to use static IP assignements. i just
can't seem to get them to 'stick' or 'be happy' after reboot and xen,
run-time launch.
Use the same commands with the installed system.
To make the settings permanent you also need (Jurgen Keil) :
echo 192.168.1.102 netmask 255.255.255.0 mtu 1492 > /etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 > /etc/defaultrouter
Boris.
--- On Sun, 7/26/09, Mr. Teo En Ming (Zhang Enming)
<enming.teo@asiasoftsea.net> wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
To: bderzhavets@yahoo.com, xen-devel@lists.xensource.com
Date: Sunday, July 26, 2009, 5:08 AM
I am using static IP address.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
Does your OpenSuse 11.1 32-bit has static IP address or it obtain it via
DHCP ?
If second option is in place please submit
# brctl show
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
<enming.teo@asiasoftsea.net> wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, bderzhavets@yahoo.com,
xen-devel@lists.xensource.com, Pasi Kr@yahoo.com
Date: Saturday, July 25, 2009, 10:50 PM
At the moment there is only one network card installed on my lab PC in my
company running OpenSUSE 11.1 32-bit with Xen 3.4.1-rc8 Dom 0 kernel
2.6.30-rc6 (jeremy). So when there are more network cards installed, there
will be eth0, eth1, eth2 ethernet bridges, etc.
Then I can assign the virtual network card in each virtual machine to a
specific ethernet network bridge (out of many bridges) in Domain 0 using the
vif command in guest domain configuration.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Mr. Teo En Ming (Zhang Enming) wrote:
Dear Boris,
The ethernet network bridge on OpenSUSE 11.1 is eth0.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
This means that OSOL installer (by default ) will issue DHCPDISCOVER via
your Xen bridge, looking for DHCP server on your LAN. Only on RHEL 5.3
(F10 with Xen 3.3.1 src.rpm been installed along with generated packages)
with libvirtd & dnsmasq up and running you can specify
vif=['bridge=virbr0' ] to detect DHCP Server at your Dom0.
View for instance :-
http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-
f10-dom0-kernel-2630-rc3-tip/
I don't have any experience with OpenSuse 11.1 . I hardly remind they tried
to reproduce RH's technology. Most probably they did it in SLES 11 (not
sure). Check for libvirtd&dnsmasq daemons up and running.
But if your OpenSuse 11.1 Dom0 is on "dhcp" bridge itself , then no
problems. Just vif=['bridge=eth0'].
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
<enming.teo@asiasoftsea.net> wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
To: bderzhavets@yahoo.com
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, Pasi Kr@yahoo.com,
xen-devel@lists.xensource.com
Date: Saturday, July 25, 2009, 12:32 PM
Dear Boris,
This means I have to install a DHCP server or dnsmasq in my Dom 0, listening
on my Dom 0's IP address, so that it can assign dynamic IP addresses to the
DomU.
By the way, are there any paravirtualized device drivers that I can install
in DomU to improve the performance of the virtual machine?
Thank you.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
>I noticed under the guest domain configuration there is a parameter called
>'extra' kernel parameter. Does the 'nowin' argument stand for no >graphical
windows?
Login as jack/jack to text console.
Wait until :-
$ pfexec ifconfig -a
will show up your IPv4 address
$ mkdir .vnc
$ cp .Xclients .vnc/xstartup
$ vncserver
Connect via vncviewer IP-DomU:1 from another terminal session to OSOL DomU.
In case OSOL installer will fail to obtain IP via DHCPDISCOVER,
let me know. It might happen and requires Solaris Kernel Model Debugger
to disable checksum offloading at boot up. Seems to be hardware dependent
issue for OSOL 2009.06
**********************************
Copy ramdisk and kernel to Dom0
**********************************
[root@ServerXen isos]# cat copy.sh
mount -o loop,ro osol-0906-x86.iso /mnt
cp /mnt/boot/amd64/x86.microroot /home/boris/solaris
cp /mnt/platform/i86xpv/kernel/amd64/unix /home/boris/solaris
***********************
Installation profile:-
***********************
[root@ServerXen solaris]# cat osol200906.install
name = "sol0906"
vcpus = 1
memory = "1024"
kernel = "/home/boris/solaris/unix"
ramdisk = "/home/boris/solaris/x86.microroot"
extra = "/platform/i86xpv/kernel/amd64/unix - nowin -B install_media=cdrom"
disk = ['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
# Would work as well
# disk = ['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']
vif = ['bridge=eth1']
on_shutdown = "destroy"
on_reboot = "destroy"
on_crash = "destroy"
Boris
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
<enming.teo@asiasoftsea.net> wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com,
=?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
Date: Saturday, July 25, 2009, 7:14 AM
Dear All,
I am trying to install OpenSolaris 2009.06 32-bit paravirtualized guest on
OpenSUSE 11.1 32-bit paravirt-ops enabled Xen 3.4.1-rc8 Dom 0 Kernel
2.6.30-rc6.
However, I am getting an opensolaris console login prompt. There is no GNOME
DE for me to launch the GUI installer for OpenSolaris. I am using the
OpenSolaris LiveCD 32-bit.
I noticed under the guest domain configuration there is a parameter called
'extra' kernel parameter. Does the 'nowin' argument stand for no graphical
windows?
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1
600-h/01.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1
600-h/04.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1
600-h/05.jpeg
Then I also get the "invalid disk device number (768)" error. Do I need to
use xvda instead of hda?
Thank you very much.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo En Ming wrote:
As a matter of fact, our servers are either Dell PowerEdge 1950/2950 and IBM
xSeries.
I am just testing it out on our lab PC first.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Boris Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Sat, 25 Jul 2009 02:27:02 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Dear Boris,
My next step will be a 64-bit Xen Dom 0 host.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: Pasi Kärkkäinen <pasik@iki.fi>, enming.teo@asiasoftsea.net
Cc: Sander Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 10:57:49 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Teo, it is up to you how to manage, if you just having fun.
Otherwise, downloading 64-bit OpenSuse 11.1 ISO image
takes just 12-14 hr even at slow ADSL speed ( like 100 KB/sec).
Install takes 30 minutes and brings you to the trusted results, instead
of wasting a lot of time in case of business environment assignment.
Pasi has 32-bit experience due to hardware limitations, which you don't
have.
Boris.
--- On Fri, 7/24/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:56 PM
Dear Boris,
My colleague installed OpenSUSE 11.1 32-bit on the Core 2 Duo machine in our
labs. Please see my earlier replies in the same topic.
I was too lazy to reformat and install 64-bit OpenSUSE, so I proceeded with
Xen Dom 0 pvops kernel compilation on 32-bit Linux host.
I admit I am getting a lot of headache. Haha.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: enming.teo@asiasoftsea.net, Pasi Kärkkäinen <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Once again, i don't see any reason to to run 32-bit OS on Core2Duo,
unless you like Xen head ache. Core development (PVOPS) is obviously
running in 64-bit environment.
Boris.
--- On Fri, 7/24/09, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: enming.teo@asiasoftsea.net, "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:47 PM
>After doing the above, I re-installed back the Xen hypervisor, libraries
and tools, and also >the kernel, initrd, and modules. Then I proceeded to
reboot my machine. After rebooting, > my CentOS 4.7 32-bit PV guest is still
able to start and run!
Why it wouldn't ? If your image stays the same.
> I am still very puzzled! What causes the PV guest initially cannot start?
Then what >subsequently causes the PV guest to suddenly be able to start and
run???
That is not supposed to happen. I would suggest clean OS (without any built
in xen presence) install , followed by Xen 3.4.1+pvops kernel clean
install.
Boris.
--- On Fri, 7/24/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: "Teo En Ming" <enming.teo@asiasoftsea.net>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:19 PM
Dear All,
I am very puzzled. In investigating the cause of the sudden success of the
CentOS 4.7 32-bit PV guest being able to run, I have uninstalled
virt-manager and all of its dependencies:
docbook
python-gtk-vnc
xen-libs 3.3.1
scrollkeeper
xen-tools 3.3.1
libvirt 0.4.6
libvirt-python
vm-install 0.3.24
Then I proceeded to "make uninstall" in xen-3.4-testing source tree, which
also removed my self compiled Xen Dom 0 pvops enabled kernel, initrd and
kernel modules.
After doing the above, I re-installed back the Xen hypervisor, libraries and
tools, and also the kernel, initrd, and modules. Then I proceeded to reboot
my machine. After rebooting, my CentOS 4.7 32-bit PV guest is still able to
start and run!
I am still very puzzled! What causes the PV guest initially cannot start?
Then what subsequently causes the PV guest to suddenly be able to start and
run???
***scratches head***
Anyway my CentOS 4.7 guest domain is now running. I shall now proceed to
virtualize OpenSolaris 2009.06.
Thank you.
Also see screenshots of my CentOS 4.7 PV guest here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-
32-bit.html
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Teo En Ming" <enming.teo@asiasoftsea.net>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 22:54:26 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Hi Pasi,
It's very strange. Suddenly my CentOS 4.7 32-bit PV guest is able to
start!!! Previously it refuses to start at all.
I think I must have changed something in Dom 0 when I attempted "yast
--install virt-manager". This action might have solved the problem. When I
tried to install virt-manager, it also tries to install xen-libs-3.3.1 and
xen-tools-3.3.1 as dependencies. However, I started off my Xen Dom 0 pvops
kernel install with Xen 3.4.1 rc8 branch.
I need to investigate more why suddenly my CentOS 4.7 32-bit PV guest is
able to start.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 21:54:00 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Hi Pasi,
I realized that Fedora 10 32-bit anaconda installer does not install PAE
kernel after mounting the guest disk image file. I mounted the guest disk
image file using losetup and kpartx which adds device nodes to /dev/mapper.
I examined the /boot directory after mounting the guest disk image file and
found no PAE vmlinuz and initrd.
Still using the mounted Fedora 10 32-bit guest disk image file, I changed
root to the guest disk filesystems and attempted to install the PAE kernel.
Then I modified menu.lst to boot the PAE kernel. After modifying the grub
configuration of the guest domain, I un-mounted the guest filesystem.
I proceeded to boot the F10 32-bit guest, since I changed to PAE kernel. It
is able to boot now (since the PAE kernel is xen-aware) but then it
complains cannot mount /dev/root. Probably something to do with the PAE
initrd file.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming <enming.teo@asiasoftsea.net>
Cc: Sander Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 16:31:19 +0300
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
On Fri, Jul 24, 2009 at 08:37:09PM +0800, Teo En Ming wrote:
> Hi
>
> I attempted to install Fedora 10 32-bit PV guest using
> images/pxeboot/vmlinuz-PAE and images/pxeboot/initrd-PAE.img from the F10
> media. The non-PAE kernel could not load the installer. I finished my
Fedora
> 10 32-bit PV guest installation but it also cannot boot up after
> installation, same as the CentOS 4.7 PV guest installation.
>
Fedora 10 installer has a bug, as a default it installs non-PAE kernel for
xen domU. You need to use a kickstart script (like this) to fix it:
http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
The important lines being:
-kernel
kernel-PAE
(Fedora 10 and Fedora 11 default kernels are compiled with pv_ops Xen domU
support enabled, so there's no need for separate kernel-xen with these
distros).
Fedora 11 doesn't have that installer bug, so it installs right
out-of-the-box as Xen domU.
What's the error you get when you start the guest after installation?
Please paste the "xm log" as text.
I don't have any problems with CentOS 5.3 dom0.
-- Pasi
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_____
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date: 07/25/09
01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_____
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date: 07/25/09
01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_____
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_____
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09
18:01:00
_____
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09
18:01:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09
18:01:00
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.13.24/2255 - Release Date: 07/22/09
18:00:00
[-- Attachment #1.2: Type: text/html, Size: 74925 bytes --]
[-- Attachment #2: ATT00622.txt --]
[-- Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-27 8:57 Boris Derzhavets
2009-07-27 9:57 ` Teo En Ming
0 siblings, 1 reply; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-27 8:57 UTC (permalink / raw)
To: xen-devel, enming.teo
[-- Attachment #1.1: Type: text/plain, Size: 60860 bytes --]
Please, submit "brctl show"
Boris.
--- On Mon, 7/27/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 12:58 AM
Dear Boris,
I have changed my opensolaris vm configuration. Please see
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIVtghCI/AAAAAAAAAGE/ZGkYbBhhx5w/s1600-h/01.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIDWV0RI/AAAAAAAAAF8/aP9riPOEZyk/s1600-h/02.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHzY3WCI/AAAAAAAAAF0/gFxy7zJZXi8/s1600-h/03.jpeg
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHm0RO8I/AAAAAAAAAFs/hIgei-yTbx4/s1600-h/04.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHcUoQ_I/AAAAAAAAAFk/9AiZKPqmG80/s1600-h/05.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/Sm0zdXRfyuI/AAAAAAAAAGM/ZqOaIbmTzB8/s1600-h/06.jpeg
I see my OpenSolaris guest sending DHCPDISCOVER and my OpenSUSE 11.1
32-bit Dom 0 Xen host sending DHCPOFFER but the OpenSolaris virtual machine
is not setting the offered dynamic IP address to it's virtual NIC.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Boris Derzhavets" <bderzhavets@yahoo.com>
To: <xen-devel@lists.xensource.com>,
<enming.teo@asiasoftsea.net>
Date: Mon, 27 Jul 2009 13:01:54 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
View:-
http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run with static IP:-
pfexec svcadm disable network/physical:nwam && \
pfexec svcadm enable network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0 192.168.1.102 netmask 255.255.255.0
mtu 1492
pfexec ifconfig xnf0 up
pfexec route add default 192.168.1.102
which i can/do @ installer time to use static IP
assignements. i just
can't seem to get them to 'stick' or 'be happy' after
reboot and xen,
run-time launch.
Use the same commands with the installed system.
To make the settings permanent you also need (Jurgen Keil)
:
echo 192.168.1.102 netmask 255.255.255.0 mtu 1492 >
/etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 > /etc/defaultrouter
Boris.
--- On Sun, 7/26/09,
Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net
> wrote:
From: Mr. Teo En Ming (Zhang Enming) <
enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com, xen-devel@lists.xensource.com
Date: Sunday, July 26, 2009, 5:08 AM
I am using static IP
address.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
Does your OpenSuse 11.1
32-bit has static IP address or it obtain it via DHCP ?
If second option is in place please submit
# brctl show
Boris.
--- On Sat,
7/25/09, Mr. Teo En Ming (Zhang Enming)
<enming.teo@asiasoftsea.net> wrote:
From: Mr. Teo En Ming (Zhang Enming)
<enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom
0 in Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, bderzhavets@yahoo.com,
xen-devel@lists.xensource.com, Pasi Kr@yahoo.com
Date: Saturday, July 25, 2009, 10:50 PM
At the moment there is only one network card installed on my lab PC in my
company running OpenSUSE 11.1 32-bit with Xen 3.4.1-rc8 Dom 0 kernel
2.6.30-rc6 (jeremy). So when there are more network cards installed, there
will be eth0, eth1, eth2 ethernet bridges, etc.
Then I can assign the virtual network card in each
virtual machine to a specific ethernet network bridge (out of many bridges)
in Domain 0 using the vif command in guest domain configuration.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Mr. Teo En Ming (Zhang Enming) wrote:
Dear Boris,
The ethernet network bridge on OpenSUSE 11.1 is
eth0.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
This means that OSOL
installer (by default ) will issue DHCPDISCOVER via your Xen bridge, looking
for DHCP server on your LAN. Only on RHEL 5.3
(F10 with Xen 3.3.1 src.rpm been installed
along with generated packages) with libvirtd & dnsmasq up and running
you can specify
vif=['bridge=virbr0' ] to detect DHCP
Server at your Dom0.
View for instance :-
http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
I don't have any experience with OpenSuse 11.1
. I hardly remind they tried to reproduce RH's technology. Most probably
they did it in SLES 11 (not sure). Check for libvirtd&dnsmasq daemons up
and running.
But if your OpenSuse 11.1 Dom0 is on "dhcp"
bridge itself , then no problems. Just vif=['bridge=eth0'].
Boris.
--- On Sat,
7/25/09, Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net
> wrote:
From: Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net
>
Subject: Re: [Xen-devel] Unable to Configure
Xen Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com
Cc: "Sander Eikelenboom"
<linux@eikelenboom.it>, Pasi Kr@yahoo.com,
xen-devel@lists.xensource.com
Date: Saturday, July 25, 2009, 12:32 PM
Dear Boris,
This means I have to install a DHCP server or
dnsmasq in my Dom 0, listening on my Dom 0's IP address, so that it can
assign dynamic IP addresses to the DomU.
By the way, are there any paravirtualized
device drivers that I can install in DomU to improve the performance of the
virtual machine?
Thank you.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
>I
noticed under the guest domain configuration there is a parameter called
>'extra' kernel parameter. Does the 'nowin' argument stand for no
>graphical windows?
Login as jack/jack to text console.
Wait until :-
$ pfexec ifconfig -a
will show up your IPv4 address
$ mkdir .vnc
$ cp .Xclients .vnc/xstartup
$ vncserver
Connect via vncviewer IP-DomU:1 from
another terminal session to OSOL DomU. In case OSOL installer will fail to
obtain IP via DHCPDISCOVER,
let me know. It might happen and requires
Solaris Kernel Model Debugger
to disable checksum offloading at boot
up. Seems to be hardware dependent issue for OSOL 2009.06
**********************************
Copy ramdisk and kernel to Dom0
**********************************
[root@ServerXen isos]# cat copy.sh
mount -o
loop,ro osol-0906-x86.iso /mnt
cp
/mnt/boot/amd64/x86.microroot /home/boris/solaris
cp
/mnt/platform/i86xpv/kernel/amd64/unix /home/boris/solaris
***********************
Installation profile:-
***********************
[root@ServerXen solaris]# cat osol200906.install
name =
"sol0906"
vcpus =
1
memory =
"1024"
kernel =
"/home/boris/solaris/unix"
ramdisk =
"/home/boris/solaris/x86.microroot"
extra =
"/platform/i86xpv/kernel/amd64/unix - nowin -B install_media=cdrom"
disk =
['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
# Would
work as well
# disk =
['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']
vif =
['bridge=eth1']
on_shutdown = "destroy"
on_reboot
= "destroy"
on_crash =
"destroy"
Boris
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <
enming.teo@asiasoftsea.net >
wrote:
From: Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net
>
Subject: Re: [Xen-devel] Unable to
Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom"
<linux@eikelenboom.it>, "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com,
=?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
Date: Saturday, July 25, 2009, 7:14
AM
Dear All,
I am trying to install OpenSolaris
2009.06 32-bit paravirtualized guest on OpenSUSE 11.1 32-bit paravirt-ops
enabled Xen 3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6.
However, I am getting an opensolaris
console login prompt. There is no GNOME DE for me to launch the GUI
installer for OpenSolaris. I am using the OpenSolaris LiveCD 32-bit.
I noticed under the guest domain
configuration there is a parameter called 'extra' kernel parameter. Does the
'nowin' argument stand for no graphical windows?
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
Then I also get the "invalid disk
device number (768)" error. Do I need to use xvda instead of hda?
Thank you very much.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo En Ming wrote:
As a
matter of fact, our servers are either Dell PowerEdge 1950/2950 and IBM
xSeries.
I am
just testing it out on our lab PC first.
Mr. Teo
En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines
Plaza
Singapore 529541
Republic of Singapore
Mobile Phone
: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming"
< enming.teo@asiasoftsea.net
>
To: "Boris Derzhavets"
<bderzhavets@yahoo.com>, "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom
<linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Sat, 25 Jul 2009 02:27:02 +0800
Subject: Re: Re[8]: [Xen-devel]
Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Dear
Boris,
My next
step will be a 64-bit Xen Dom 0 host.
Mr. Teo
En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines
Plaza
Singapore 529541
Republic of Singapore
Mobile Phone
: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets
<bderzhavets@yahoo.com>
To: Pasi Kärkkäinen
<pasik@iki.fi>,
enming.teo@asiasoftsea.net
Cc: Sander Eikelenboom
<linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 10:57:49
-0700 (PDT)
Subject: Re: Re[8]: [Xen-devel]
Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Teo, it
is up to you how to manage, if you just having fun.
Otherwise, downloading 64-bit
OpenSuse 11.1 ISO image
takes just 12-14 hr even at
slow ADSL speed ( like 100 KB/sec).
Install takes 30 minutes and
brings you to the trusted results, instead
of wasting a lot of time in
case of business environment assignment.
Pasi has 32-bit experience due
to hardware limitations, which you don't
have.
Boris.
--- On Fri, 7/24/09, Teo En Ming <
enming.teo@asiasoftsea.net > wrote:
From: Teo En Ming
< enming.teo@asiasoftsea.net
>
Subject: Re: Re[8]: [Xen-devel]
Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Boris Derzhavets"
<bderzhavets@yahoo.com>, "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom"
<linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Friday, July 24, 2009,
12:56 PM
Dear Boris,
My colleague installed OpenSUSE 11.1 32-bit on the Core 2 Duo machine in our
labs. Please see my earlier replies in the same topic.
I was too lazy to reformat and install 64-bit OpenSUSE, so I proceeded with
Xen Dom 0 pvops kernel compilation on 32-bit Linux host.
I admit I am getting a lot of headache. Haha.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of Singapore
Mobile Phone
: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets
<bderzhavets@yahoo.com>
To:
enming.teo@asiasoftsea.net , Pasi Kärkkäinen
<pasik@iki.fi>
Cc: Sander Eikelenboom
<linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009
09:57:18 -0700 (PDT)
Subject: Re: Re[8]:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Once again, i don't see any reason to to run 32-bit OS on Core2Duo,
unless you like Xen
head ache. Core development (PVOPS) is obviously
running in 64-bit
environment.
Boris.
--- On Fri, 7/24/09, Boris Derzhavets <bderzhavets@yahoo.com>
wrote:
From: Boris Derzhavets
<bderzhavets@yahoo.com>
Subject: Re: Re[8]:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
enming.teo@asiasoftsea.net , "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Friday, July 24,
2009, 12:47 PM
>After doing the above, I
re-installed back the Xen hypervisor, libraries and tools, and also >the
kernel, initrd, and modules. Then I proceeded to reboot my machine. After
rebooting, > my CentOS 4.7 32-bit PV guest is still able to start and
run!
Why it wouldn't ?
If your image stays the same.
> I am still very puzzled! What causes the PV guest initially
cannot start? Then what >subsequently causes the PV guest to suddenly be
able to start and run???
That is not
supposed to happen. I would suggest clean OS (without any built in xen
presence) install , followed by Xen 3.4.1+pvops kernel clean install.
Boris.
--- On Fri, 7/24/09, Teo En Ming <
enming.teo@asiasoftsea.net > wrote:
From: Teo En Ming
< enming.teo@asiasoftsea.net
>
Subject: Re:
Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Teo En Ming"
< enming.teo@asiasoftsea.net
>, "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Friday,
July 24, 2009, 12:19 PM
Dear All,
I am very puzzled. In investigating the cause of the sudden
success of the CentOS 4.7 32-bit PV guest being able to run, I have
uninstalled virt-manager and all of its dependencies:
docbook
python-gtk-vnc
xen-libs 3.3.1
scrollkeeper
xen-tools 3.3.1
libvirt 0.4.6
libvirt-python
vm-install 0.3.24
Then I proceeded to "make uninstall" in xen-3.4-testing source
tree, which also removed my self compiled Xen Dom 0 pvops enabled kernel,
initrd and kernel modules.
After doing the above, I re-installed back the Xen hypervisor,
libraries and tools, and also the kernel, initrd, and modules. Then I
proceeded to reboot my machine. After rebooting, my CentOS 4.7 32-bit PV
guest is still able to start and run!
I am still very puzzled! What causes the PV guest initially cannot
start? Then what subsequently causes the PV guest to suddenly be able to
start and run???
***scratches head***
Anyway my CentOS 4.7 guest domain is now running. I shall now
proceed to virtualize OpenSolaris 2009.06.
Thank you.
Also see screenshots of my CentOS 4.7 PV guest here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft
Online Pte Ltd
Tampines
Central 1 #04-01 Tampines Plaza
Singapore
529541
Republic of Singapore
Mobile
Phone: +65-9648-9798
MSN:
teoenming@hotmail.com
-----Original Message-----
From: "Teo En
Ming" <
enming.teo@asiasoftsea.net >
To: "Teo En
Ming" <
enming.teo@asiasoftsea.net >, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: Sander
Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24
Jul 2009 22:54:26 +0800
Subject: Re:
Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Hi Pasi,
It's very strange. Suddenly my CentOS 4.7
32-bit PV guest is able to start!!! Previously it refuses to start at all.
I think I must have changed something in Dom 0
when I attempted "yast --install virt-manager". This action might have
solved the problem. When I tried to install virt-manager, it also tries to
install xen-libs-3.3.1 and xen-tools-3.3.1 as dependencies. However, I
started off my Xen Dom 0 pvops kernel install with Xen 3.4.1 rc8 branch.
I need to investigate more why suddenly my
CentOS 4.7 32-bit PV guest is able to start.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft
Online Pte Ltd
Tampines
Central 1 #04-01 Tampines Plaza
Singapore
529541
Republic
of
Singapore
Mobile
Phone: +65-9648-9798
MSN:
teoenming@hotmail.com
-----Original
Message-----
From: "Teo
En Ming" <
enming.teo@asiasoftsea.net >
To: "Pasi
Kärkkäinen" <pasik@iki.fi>
Cc: Sander
Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri,
24 Jul 2009 21:54:00 +0800
Subject:
Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Hi Pasi,
I realized that Fedora 10 32-bit anaconda
installer does not install PAE kernel after mounting the guest disk image
file. I mounted the guest disk image file using losetup and kpartx which
adds device nodes to /dev/mapper. I examined the /boot directory after
mounting the guest disk image file and found no PAE vmlinuz and initrd.
Still using the mounted Fedora 10 32-bit guest
disk image file, I changed root to the guest disk filesystems and attempted
to install the PAE kernel. Then I modified menu.lst to boot the PAE kernel.
After modifying the grub configuration of the guest domain, I un-mounted the
guest filesystem.
I proceeded to boot the F10 32-bit guest, since
I changed to PAE kernel. It is able to boot now (since the PAE kernel is
xen-aware) but then it complains cannot mount /dev/root. Probably something
to do with the PAE initrd file.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft
Online Pte Ltd
Tampines
Central 1 #04-01 Tampines Plaza
Singapore
529541
Republic
of
Singapore
Mobile
Phone: +65-9648-9798
MSN:
teoenming@hotmail.com
-----Original
Message-----
From:
Pasi Kärkkäinen <pasik@iki.fi>
To: Teo
En Ming <
enming.teo@asiasoftsea.net >
Cc:
Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date:
Fri, 24 Jul 2009 16:31:19 +0300
Subject:
Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Fri, Jul 24, 2009 at
08:37:09PM +0800, Teo En Ming wrote:
> Hi
>
> I
attempted to install Fedora 10 32-bit PV guest using
>
images/pxeboot/vmlinuz-PAE and images/pxeboot/initrd-PAE.img from the F10
>
media. The non-PAE kernel could not load the installer. I finished my Fedora
> 10
32-bit PV guest installation but it also cannot boot up after
>
installation, same as the CentOS 4.7 PV guest installation.
>
Fedora
10 installer has a bug, as a default it installs non-PAE kernel for
xen
domU. You need to use a kickstart script (like this) to fix it:
http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
The
important lines being:
-kernel
kernel-PAE
(Fedora
10 and Fedora 11 default kernels are compiled with pv_ops Xen domU
support
enabled, so there's no need for separate kernel-xen with these distros).
Fedora
11 doesn't have that installer bug, so it installs right
out-of-the-box as Xen domU.
What's
the error you get when you start the guest after installation?
Please
paste the "xm log" as text.
I don't
have any problems with CentOS 5.3 dom0.
-- Pasi
-----Inline
Attachment Follows-----
_______________________________________________
Xen-devel
mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment
Follows-----
_______________________________________________
Xen-devel mailing
list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment
Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing
message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database:
270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database:
270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09
18:01:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 -
Release Date: 07/25/09 18:01:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 -
Release Date: 07/25/09 18:01:00
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.13.24/2255 - Release
Date: 07/22/09 18:00:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 94685 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-27 8:57 Boris Derzhavets
@ 2009-07-27 9:57 ` Teo En Ming
0 siblings, 0 replies; 86+ messages in thread
From: Teo En Ming @ 2009-07-27 9:57 UTC (permalink / raw)
To: Boris Derzhavets, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 43123 bytes --]
Dear Boris,
My CentOS 4.7 32-bit PV guest is getting the dynamic IP address assignment
from the dnsmasq dhcp server I have setup and configured on Xen Dom 0
OpenSUSE 11.1 32-bit host correctly.
So I think the issue is OpenSolaris specific.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com, enming.teo@asiasoftsea.net
Date: Mon, 27 Jul 2009 01:57:43 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Please, submit "brctl show"
Boris.
--- On Mon, 7/27/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 12:58 AM
Dear Boris,
I have changed my opensolaris vm configuration. Please see
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIVtghCI/AAAAAAAAAGE/ZGkYbBhhx5w/s1600-h/01.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIDWV0RI/AAAAAAAAAF8/aP9riPOEZyk/s1600-h/02.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHzY3WCI/AAAAAAAAAF0/gFxy7zJZXi8/s1600-h/03.jpeg
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHm0RO8I/AAAAAAAAAFs/hIgei-yTbx4/s1600-h/04.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHcUoQ_I/AAAAAAAAAFk/9AiZKPqmG80/s1600-h/05.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/Sm0zdXRfyuI/AAAAAAAAAGM/ZqOaIbmTzB8/s1600-h/06.jpeg
I see my OpenSolaris guest sending DHCPDISCOVER and my OpenSUSE 11.1
32-bit Dom 0 Xen host sending DHCPOFFER but the OpenSolaris virtual machine
is not setting the offered dynamic IP address to it's virtual NIC.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Boris Derzhavets" <bderzhavets@yahoo.com>
To: <xen-devel@lists.xensource.com>,
<enming.teo@asiasoftsea.net>
Date: Mon, 27 Jul 2009 13:01:54 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
View:-
http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run with static IP:-
pfexec svcadm disable network/physical:nwam && \
pfexec svcadm enable network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0 192.168.1.102 netmask 255.255.255.0
mtu 1492
pfexec ifconfig xnf0 up
pfexec route add default 192.168.1.102
which i can/do @ installer time to use static IP
assignements. i just
can't seem to get them to 'stick' or 'be happy' after
reboot and xen,
run-time launch.
Use the same commands with the installed system.
To make the settings permanent you also need (Jurgen Keil)
:
echo 192.168.1.102 netmask 255.255.255.0 mtu 1492 >
/etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 > /etc/defaultrouter
Boris.
--- On Sun, 7/26/09,
Mr. Teo En Ming (Zhang Enming) < enming.teo@asiasoftsea.net
> wrote:
From: Mr. Teo En Ming (Zhang Enming) <
enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com, xen-devel@lists.xensource.com
Date: Sunday, July 26, 2009, 5:08 AM
I am using static IP
address.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
Does your OpenSuse 11.1
32-bit has static IP address or it obtain it via DHCP ?
If second option is in place please submit
# brctl show
Boris.
--- On Sat,
7/25/09, Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net> wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom
0 in Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, bderzhavets@yahoo.com,
xen-devel@lists.xensource.com, Pasi Kr@yahoo.com
Date: Saturday, July 25, 2009, 10:50 PM
At the moment there is only one network card installed on my lab PC in my
company running OpenSUSE 11.1 32-bit with Xen 3.4.1-rc8 Dom 0 kernel
2.6.30-rc6 (jeremy). So when there are more network cards installed, there
will be eth0, eth1, eth2 ethernet bridges, etc.
Then I can assign the virtual network card in each
virtual machine to a specific ethernet network bridge (out of many bridges)
in Domain 0 using the vif command in guest domain configuration.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Mr. Teo En Ming (Zhang Enming) wrote:
Dear Boris,
The ethernet network bridge on OpenSUSE 11.1 is
eth0.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
This means that OSOL
installer (by default ) will issue DHCPDISCOVER via your Xen bridge, looking
for DHCP server on your LAN. Only on RHEL 5.3
(F10 with Xen 3.3.1 src.rpm been installed
along with generated packages) with libvirtd & dnsmasq up and running
you can specify
vif=['bridge=virbr0' ] to detect DHCP
Server at your Dom0.
View for instance :-
http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
[http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/]
I don't have any experience with OpenSuse 11.1
. I hardly remind they tried to reproduce RH's technology. Most probably
they did it in SLES 11 (not sure). Check for libvirtd&dnsmasq daemons up
and running.
But if your OpenSuse 11.1 Dom0 is on "dhcp"
bridge itself , then no problems. Just vif=['bridge=eth0'].
Boris.
--- On Sat,
7/25/09, Mr. Teo En Ming (Zhang Enming) < enming.teo@asiasoftsea.net
> wrote:
From: Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net
>
Subject: Re: [Xen-devel] Unable to Configure
Xen Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com
Cc: "Sander Eikelenboom"
<linux@eikelenboom.it>, Pasi Kr@yahoo.com,
xen-devel@lists.xensource.com
Date: Saturday, July 25, 2009, 12:32 PM
Dear Boris,
This means I have to install a DHCP server or
dnsmasq in my Dom 0, listening on my Dom 0's IP address, so that it can
assign dynamic IP addresses to the DomU.
By the way, are there any paravirtualized
device drivers that I can install in DomU to improve the performance of the
virtual machine?
Thank you.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
>I
noticed under the guest domain configuration there is a parameter called
>'extra' kernel parameter. Does the 'nowin' argument stand for no
>graphical windows?
Login as jack/jack to text console.
Wait until :-
$ pfexec ifconfig -a
will show up your IPv4 address
$ mkdir .vnc
$ cp .Xclients .vnc/xstartup
$ vncserver
Connect via vncviewer IP-DomU:1 from
another terminal session to OSOL DomU. In case OSOL installer will fail to
obtain IP via DHCPDISCOVER,
let me know. It might happen and requires
Solaris Kernel Model Debugger
to disable checksum offloading at boot
up. Seems to be hardware dependent issue for OSOL 2009.06
**********************************
Copy ramdisk and kernel to Dom0
**********************************[root@ServerXen isos]# cat copy.sh
mount -o
loop,ro osol-0906-x86.iso /mnt
cp
/mnt/boot/amd64/x86.microroot /home/boris/solaris
cp
/mnt/platform/i86xpv/kernel/amd64/unix
/home/boris/solaris***********************
Installation profile:-
***********************[root@ServerXen solaris]# cat osol200906.install
name =
"sol0906"
vcpus =
1
memory =
"1024"
kernel =
"/home/boris/solaris/unix"
ramdisk =
"/home/boris/solaris/x86.microroot"
extra =
"/platform/i86xpv/kernel/amd64/unix - nowin -B install_media=cdrom"
disk =
['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
# Would
work as well
# disk =
['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']
vif =
['bridge=eth1']on_shutdown = "destroy"
on_reboot
= "destroy"
on_crash =
"destroy"Boris
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <
enming.teo@asiasoftsea.net >
wrote:
From: Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net
>
Subject: Re: [Xen-devel] Unable to
Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom"
<linux@eikelenboom.it>, "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com,
=?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
Date: Saturday, July 25, 2009, 7:14
AM
Dear All,
I am trying to install OpenSolaris
2009.06 32-bit paravirtualized guest on OpenSUSE 11.1 32-bit paravirt-ops
enabled Xen 3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6.
However, I am getting an opensolaris
console login prompt. There is no GNOME DE for me to launch the GUI
installer for OpenSolaris. I am using the OpenSolaris LiveCD 32-bit.
I noticed under the guest domain
configuration there is a parameter called 'extra' kernel parameter. Does the
'nowin' argument stand for no graphical windows?
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
[http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg]
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
[http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg]
http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
[http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg]
Then I also get the "invalid disk
device number (768)" error. Do I need to use xvda instead of hda?
Thank you very much.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo En Ming wrote:
As a
matter of fact, our servers are either Dell PowerEdge 1950/2950 and IBM
xSeries.
I am
just testing it out on our lab PC first.
Mr. Teo
En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines
Plaza
Singapore 529541
Republicof Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming"
< enming.teo@asiasoftsea.net
>
To: "Boris Derzhavets"
<bderzhavets@yahoo.com>, "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom
<linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Sat, 25 Jul 2009 02:27:02 +0800
Subject: Re: Re[8]: [Xen-devel]
Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Dear
Boris,
My next
step will be a 64-bit Xen Dom 0 host.
Mr. Teo
En Ming (Zhang Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical
Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines
Plaza
Singapore 529541
Republicof Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets
<bderzhavets@yahoo.com>
To: Pasi Kärkkäinen
<pasik@iki.fi>,
enming.teo@asiasoftsea.net
Cc: Sander Eikelenboom
<linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 10:57:49
-0700 (PDT)
Subject: Re: Re[8]: [Xen-devel]
Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Teo, it
is up to you how to manage, if you just having fun.
Otherwise, downloading 64-bit
OpenSuse 11.1 ISO image
takes just 12-14 hr even at
slow ADSL speed ( like 100 KB/sec).
Install takes 30 minutes and
brings you to the trusted results, instead
of wasting a lot of time in
case of business environment assignment.
Pasi has 32-bit experience due
to hardware limitations, which you don't
have.
Boris.
--- On Fri, 7/24/09, Teo En Ming <
enming.teo@asiasoftsea.net > wrote:
From: Teo En Ming
< enming.teo@asiasoftsea.net
>
Subject: Re: Re[8]: [Xen-devel]
Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Boris Derzhavets"
<bderzhavets@yahoo.com>, "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom"
<linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Friday, July 24, 2009,
12:56 PM
Dear Boris,
My colleague installed OpenSUSE 11.1 32-bit on the Core 2 Duo machine in our
labs. Please see my earlier replies in the same topic.
I was too lazy to reformat and install 64-bit OpenSUSE, so I proceeded with
Xen Dom 0 pvops kernel compilation on 32-bit Linux host.
I admit I am getting a lot of headache. Haha.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republicof Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets
<bderzhavets@yahoo.com>
To:
enming.teo@asiasoftsea.net , Pasi Kärkkäinen
<pasik@iki.fi>
Cc: Sander Eikelenboom
<linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009
09:57:18 -0700 (PDT)
Subject: Re: Re[8]:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Once again, i don't see any reason to to run 32-bit OS on Core2Duo,
unless you like Xen
head ache. Core development (PVOPS) is obviously
running in 64-bit
environment.
Boris.
--- On Fri, 7/24/09, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
From: Boris Derzhavets
<bderzhavets@yahoo.com>
Subject: Re: Re[8]:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
enming.teo@asiasoftsea.net , "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Friday, July 24,
2009, 12:47 PM
>After doing the above, I
re-installed back the Xen hypervisor, libraries and tools, and also >the
kernel, initrd, and modules. Then I proceeded to reboot my machine. After
rebooting, > my CentOS 4.7 32-bit PV guest is still able to start and
run!Why it wouldn't ?
If your image stays the same.
> I am still very puzzled! What causes the PV guest initially
cannot start? Then what >subsequently causes the PV guest to suddenly be
able to start and run???
That is not
supposed to happen. I would suggest clean OS (without any built in xen
presence) install , followed by Xen 3.4.1+pvops kernel clean install.
Boris.
--- On Fri, 7/24/09, Teo En Ming <
enming.teo@asiasoftsea.net > wrote:
From: Teo En Ming
< enming.teo@asiasoftsea.net
>
Subject: Re:
Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Teo En Ming"
< enming.teo@asiasoftsea.net
>, "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Friday,
July 24, 2009, 12:19 PM
Dear All,
I am very puzzled. In investigating the cause of the sudden
success of the CentOS 4.7 32-bit PV guest being able to run, I have
uninstalled virt-manager and all of its dependencies:
docbook
python-gtk-vnc
xen-libs 3.3.1
scrollkeeper
xen-tools 3.3.1
libvirt 0.4.6
libvirt-python
vm-install 0.3.24
Then I proceeded to "make uninstall" in xen-3.4-testing source
tree, which also removed my self compiled Xen Dom 0 pvops enabled kernel,
initrd and kernel modules.
After doing the above, I re-installed back the Xen hypervisor,
libraries and tools, and also the kernel, initrd, and modules. Then I
proceeded to reboot my machine. After rebooting, my CentOS 4.7 32-bit PV
guest is still able to start and run!
I am still very puzzled! What causes the PV guest initially cannot
start? Then what subsequently causes the PV guest to suddenly be able to
start and run???
***scratches head***
Anyway my CentOS 4.7 guest domain is now running. I shall now
proceed to virtualize OpenSolaris 2009.06.
Thank you.
Also see screenshots of my CentOS 4.7 PV guest here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html]
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft
Online Pte Ltd
Tampines
Central 1 #04-01 Tampines Plaza
Singapore
529541
Republicof Singapore
Mobile
Phone: +65-9648-9798
MSN:
teoenming@hotmail.com
-----Original Message-----
From: "Teo En
Ming" <
enming.teo@asiasoftsea.net >
To: "Teo En
Ming" <
enming.teo@asiasoftsea.net >, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: Sander
Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24
Jul 2009 22:54:26 +0800
Subject: Re:
Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Hi Pasi,
It's very strange. Suddenly my CentOS 4.7
32-bit PV guest is able to start!!! Previously it refuses to start at all.
I think I must have changed something in Dom 0
when I attempted "yast --install virt-manager". This action might have
solved the problem. When I tried to install virt-manager, it also tries to
install xen-libs-3.3.1 and xen-tools-3.3.1 as dependencies. However, I
started off my Xen Dom 0 pvops kernel install with Xen 3.4.1 rc8 branch.
I need to investigate more why suddenly my
CentOS 4.7 32-bit PV guest is able to start.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft
Online Pte Ltd
Tampines
Central 1 #04-01 Tampines Plaza
Singapore
529541
Republic
of
Singapore
Mobile
Phone: +65-9648-9798
MSN:
teoenming@hotmail.com
-----Original
Message-----
From: "Teo
En Ming" <
enming.teo@asiasoftsea.net >
To: "Pasi
Kärkkäinen" <pasik@iki.fi>
Cc: Sander
Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri,
24 Jul 2009 21:54:00 +0800
Subject:
Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Hi Pasi,
I realized that Fedora 10 32-bit anaconda
installer does not install PAE kernel after mounting the guest disk image
file. I mounted the guest disk image file using losetup and kpartx which
adds device nodes to /dev/mapper. I examined the /boot directory after
mounting the guest disk image file and found no PAE vmlinuz and initrd.
Still using the mounted Fedora 10 32-bit guest
disk image file, I changed root to the guest disk filesystems and attempted
to install the PAE kernel. Then I modified menu.lst to boot the PAE kernel.
After modifying the grub configuration of the guest domain, I un-mounted the
guest filesystem.
I proceeded to boot the F10 32-bit guest, since
I changed to PAE kernel. It is able to boot now (since the PAE kernel is
xen-aware) but then it complains cannot mount /dev/root. Probably something
to do with the PAE initrd file.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft
Online Pte Ltd
Tampines
Central 1 #04-01 Tampines Plaza
Singapore
529541
Republic
of
Singapore
Mobile
Phone: +65-9648-9798
MSN:
teoenming@hotmail.com
-----Original
Message-----
From:
Pasi Kärkkäinen <pasik@iki.fi>
To: Teo
En Ming <
enming.teo@asiasoftsea.net >
Cc:
Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date:
Fri, 24 Jul 2009 16:31:19 +0300
Subject:
Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Fri, Jul 24, 2009 at
08:37:09PM +0800, Teo En Ming wrote:
> Hi
>
> I
attempted to install Fedora 10 32-bit PV guest using
>
images/pxeboot/vmlinuz-PAE and images/pxeboot/initrd-PAE.img from the F10
>
media. The non-PAE kernel could not load the installer. I finished my Fedora
> 10
32-bit PV guest installation but it also cannot boot up after
>
installation, same as the CentOS 4.7 PV guest installation.
>
Fedora
10 installer has a bug, as a default it installs non-PAE kernel for
xen
domU. You need to use a kickstart script (like this) to fix it:
http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
[http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg]
The
important lines being:
-kernel
kernel-PAE
(Fedora
10 and Fedora 11 default kernels are compiled with pv_ops Xen domU
support
enabled, so there's no need for separate kernel-xen with these distros).
Fedora
11 doesn't have that installer bug, so it installs right
out-of-the-box as Xen domU.
What's
the error you get when you start the guest after installation?
Please
paste the "xm log" as text.
I don't
have any problems with CentOS 5.3 dom0.
-- Pasi
-----Inline
Attachment Follows-----
_______________________________________________
Xen-devel
mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
-----Inline Attachment
Follows-----
_______________________________________________
Xen-devel mailing
list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
-----Inline Attachment
Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
No virus found in this outgoing
message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 / Virus Database:
270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 / Virus Database:
270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
No virus found in this outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09
18:01:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 / Virus Database: 270.13.30/2262 -
Release Date: 07/25/09 18:01:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 -
Release Date: 07/25/09 18:01:00
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.13.24/2255 - Release
Date: 07/22/09 18:00:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=Xen-devel@lists.xensource.com]
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 106947 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-27 10:15 Boris Derzhavets
2009-07-27 10:22 ` Teo En Ming
0 siblings, 1 reply; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-27 10:15 UTC (permalink / raw)
To: xen-devel, enming.teo
[-- Attachment #1.1: Type: text/plain, Size: 71881 bytes --]
OK. What happens if you put the same vif=['bridge=...'] in OSOL installation
profile. Are you unable to get IP for install in this case ?
Boris.
--- On Mon, 7/27/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 5:57 AM
Dear Boris,
My CentOS 4.7 32-bit PV guest is getting the dynamic IP address
assignment from the dnsmasq dhcp server I have setup and configured on Xen
Dom 0 OpenSUSE 11.1 32-bit host correctly.
So I think the issue is OpenSolaris specific.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com, enming.teo@asiasoftsea.net
Date: Mon, 27 Jul 2009 01:57:43 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Please, submit "brctl show"
Boris.
--- On Mon, 7/27/09, Teo En Ming
<enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 12:58 AM
Dear Boris,
I have changed my opensolaris vm configuration. Please see
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIVtghCI/AAAAAAAAAGE/ZGkYbBhhx5w/s1600-h/01.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIDWV0RI/AAAAAAAAAF8/aP9riPOEZyk/s1600-h/02.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHzY3WCI/AAAAAAAAAF0/gFxy7zJZXi8/s1600-h/03.jpeg
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHm0RO8I/AAAAAAAAAFs/hIgei-yTbx4/s1600-h/04.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHcUoQ_I/AAAAAAAAAFk/9AiZKPqmG80/s1600-h/05.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/Sm0zdXRfyuI/AAAAAAAAAGM/ZqOaIbmTzB8/s1600-h/06.jpeg
I see my OpenSolaris guest sending DHCPDISCOVER and my
OpenSUSE 11.1 32-bit Dom 0 Xen host sending DHCPOFFER but the OpenSolaris
virtual machine is not setting the offered dynamic IP address to it's
virtual NIC.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Boris Derzhavets" <bderzhavets@yahoo.com>
To: <xen-devel@lists.xensource.com>,
<enming.teo@asiasoftsea.net>
Date: Mon, 27 Jul 2009 13:01:54 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
View:-
http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run with static IP:-
pfexec svcadm disable network/physical:nwam
&& \
pfexec svcadm enable
network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0 192.168.1.102 netmask
255.255.255.0 mtu 1492
pfexec ifconfig xnf0 up
pfexec route add default 192.168.1.102
which i can/do @ installer time to use static IP
assignements. i just
can't seem to get them to 'stick' or 'be happy'
after reboot and xen,
run-time launch.
Use the same commands with the installed system.
To make the settings permanent you also need
(Jurgen Keil) :
echo 192.168.1.102 netmask 255.255.255.0 mtu 1492
> /etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 > /etc/defaultrouter
Boris.
--- On Sun,
7/26/09, Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net > wrote:
From: Mr. Teo En Ming (Zhang Enming) <
enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel] Unable to Configure Xen
Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com,
xen-devel@lists.xensource.com
Date: Sunday, July 26, 2009, 5:08 AM
I am
using static IP address.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
Does your OpenSuse 11.1
32-bit has static IP address or it obtain it via DHCP ?
If second option is in place please submit
# brctl show
Boris.
--- On
Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to
Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom"
<linux@eikelenboom.it>, bderzhavets@yahoo.com
, xen-devel@lists.xensource.com, Pasi Kr@yahoo.com
Date: Saturday, July 25, 2009, 10:50 PM
At the moment there is only one network card
installed on my lab PC in my company running OpenSUSE 11.1 32-bit with Xen
3.4.1-rc8 Dom 0 kernel 2.6.30-rc6 (jeremy). So when there are more network
cards installed, there will be eth0, eth1, eth2 ethernet bridges, etc.
Then I can assign the virtual network
card in each virtual machine to a specific ethernet network bridge (out of
many bridges) in Domain 0 using the vif command in guest domain
configuration.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Mr. Teo En Ming (Zhang Enming) wrote:
Dear Boris,
The ethernet network bridge on OpenSUSE
11.1 is eth0.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
This
means that OSOL installer (by default ) will issue DHCPDISCOVER via your Xen
bridge, looking for DHCP server on your LAN. Only on RHEL 5.3
(F10 with Xen 3.3.1 src.rpm been
installed along with generated packages) with libvirtd & dnsmasq up and
running you can specify
vif=['bridge=virbr0' ] to
detect DHCP Server at your Dom0.
View for instance :-
http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
I don't have any experience with
OpenSuse 11.1 . I hardly remind they tried to reproduce RH's technology.
Most probably they did it in SLES 11 (not sure). Check for
libvirtd&dnsmasq daemons up and running.
But if your OpenSuse 11.1 Dom0 is on
"dhcp" bridge itself , then no problems. Just vif=['bridge=eth0'].
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) < enming.teo@asiasoftsea.net >
wrote:
From: Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel] Unable to
Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com
Cc: "Sander Eikelenboom"
<linux@eikelenboom.it>, Pasi Kr@yahoo.com,
xen-devel@lists.xensource.com
Date: Saturday, July 25, 2009, 12:32
PM
Dear
Boris,
This means I have to install a DHCP
server or dnsmasq in my Dom 0, listening on my Dom 0's IP address, so that
it can assign dynamic IP addresses to the DomU.
By the way, are there any
paravirtualized device drivers that I can install in DomU to improve the
performance of the virtual machine?
Thank you.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
>I
noticed under the guest domain configuration there is a parameter called
>'extra' kernel parameter. Does the 'nowin' argument stand for no
>graphical windows?
Login as jack/jack to text
console.
Wait until :-
$ pfexec ifconfig -a
will show up your IPv4 address
$ mkdir .vnc
$ cp .Xclients .vnc/xstartup
$ vncserver
Connect via vncviewer IP-DomU:1
from another terminal session to OSOL DomU. In case OSOL installer will fail
to obtain IP via DHCPDISCOVER,
let me know. It might happen
and requires Solaris Kernel Model Debugger
to disable checksum offloading
at boot up. Seems to be hardware dependent issue for OSOL 2009.06
**********************************
Copy ramdisk and kernel to Dom0
**********************************
[root@ServerXen isos]# cat copy.sh
mount -o loop,ro osol-0906-x86.iso /mnt
cp /mnt/boot/amd64/x86.microroot /home/boris/solaris
cp /mnt/platform/i86xpv/kernel/amd64/unix /home/boris/solaris
***********************
Installation profile:-
***********************
[root@ServerXen solaris]# cat osol200906.install
name = "sol0906"
vcpus = 1
memory = "1024"
kernel = "/home/boris/solaris/unix"
ramdisk = "/home/boris/solaris/x86.microroot"
extra = "/platform/i86xpv/kernel/amd64/unix - nowin -B
install_media=cdrom"
disk = ['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
# Would work as well
# disk = ['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']
vif =
['bridge=eth1']
on_shutdown = "destroy"
on_reboot = "destroy"
on_crash = "destroy"
Boris
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net >
wrote:
From: Mr. Teo En Ming (Zhang
Enming) < enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel] Unable
to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom"
<linux@eikelenboom.it>, "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com,
=?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
Date: Saturday, July 25, 2009,
7:14 AM
Dear All,
I am trying to install
OpenSolaris 2009.06 32-bit paravirtualized guest on OpenSUSE 11.1 32-bit
paravirt-ops enabled Xen 3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6.
However, I am getting an
opensolaris console login prompt. There is no GNOME DE for me to launch the
GUI installer for OpenSolaris. I am using the OpenSolaris LiveCD 32-bit.
I noticed under the guest
domain configuration there is a parameter called 'extra' kernel parameter.
Does the 'nowin' argument stand for no graphical windows?
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
Then I also get the "invalid
disk device number (768)" error. Do I need to use xvda instead of hda?
Thank you very much.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo En Ming wrote:
As a matter of fact, our servers are either Dell PowerEdge 1950/2950 and IBM
xSeries.
I am just testing it out on our lab PC first.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone
: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <
enming.teo@asiasoftsea.net >
To: "Boris Derzhavets"
<bderzhavets@yahoo.com>, "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom
<linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Sat, 25 Jul 2009
02:27:02 +0800
Subject: Re: Re[8]:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Dear Boris,
My next step will be a 64-bit Xen Dom 0 host.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone
:
+65-9648-9798
MSN:
teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets
<bderzhavets@yahoo.com>
To: Pasi Kärkkäinen
<pasik@iki.fi>, enming.teo@asiasoftsea.net
Cc: Sander Eikelenboom
<linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009
10:57:49 -0700 (PDT)
Subject: Re: Re[8]:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Teo, it is up to you how to manage, if you just having fun.
Otherwise,
downloading 64-bit OpenSuse 11.1 ISO image
takes just 12-14 hr
even at slow ADSL speed ( like 100 KB/sec).
Install takes 30
minutes and brings you to the trusted results, instead
of wasting a lot of
time in case of business environment assignment.
Pasi has 32-bit
experience due to hardware limitations, which you don't
have.
Boris.
--- On Fri, 7/24/09, Teo En Ming < enming.teo@asiasoftsea.net >
wrote:
From: Teo En Ming
< enming.teo@asiasoftsea.net >
Subject: Re: Re[8]:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Boris
Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Friday, July
24, 2009, 12:56 PM
Dear Boris,
My colleague installed OpenSUSE 11.1 32-bit on the Core 2 Duo
machine in our labs. Please see my earlier replies in the same topic.
I was too lazy to reformat and install 64-bit OpenSUSE, so I
proceeded with Xen Dom 0 pvops kernel compilation on 32-bit Linux host.
I admit I am getting a lot of headache. Haha.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online
Pte Ltd
Tampines Central
1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone
:
+65-9648-9798
MSN:
teoenming@hotmail.com
-----Original Message-----
From: Boris
Derzhavets <bderzhavets@yahoo.com>
To:
enming.teo@asiasoftsea.net , Pasi Kärkkäinen <pasik@iki.fi>
Cc: Sander
Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul
2009 09:57:18 -0700 (PDT)
Subject: Re:
Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Once again, i don't see any reason to to run 32-bit OS on
Core2Duo,
unless you
like Xen head ache. Core development (PVOPS) is obviously
running in
64-bit environment.
Boris.
--- On
Fri, 7/24/09, Boris Derzhavets <bderzhavets@yahoo.com>
wrote:
From: Boris
Derzhavets <bderzhavets@yahoo.com>
Subject: Re:
Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
enming.teo@asiasoftsea.net , "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Friday,
July 24, 2009, 12:47 PM
>After doing the
above, I re-installed back the Xen hypervisor, libraries and tools, and also
>the kernel, initrd, and modules. Then I proceeded to reboot my machine.
After rebooting, > my CentOS 4.7 32-bit PV guest is still able to start
and run!
Why it
wouldn't ? If your image stays the same.
> I am still very puzzled! What causes the
PV guest initially cannot start? Then what >subsequently causes the PV
guest to suddenly be able to start and run???
That is
not supposed to happen. I would suggest clean OS (without any built in xen
presence) install , followed by Xen 3.4.1+pvops kernel clean install.
Boris.
--- On
Fri, 7/24/09, Teo En Ming < enming.teo@asiasoftsea.net >
wrote:
From:
Teo En Ming < enming.teo@asiasoftsea.net >
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To:
"Teo En Ming" < enming.teo@asiasoftsea.net >, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc:
"Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date:
Friday, July 24, 2009, 12:19 PM
Dear All,
I am very puzzled. In investigating the cause
of the sudden success of the CentOS 4.7 32-bit PV guest being able to run, I
have uninstalled virt-manager and all of its dependencies:
docbook
python-gtk-vnc
xen-libs 3.3.1
scrollkeeper
xen-tools 3.3.1
libvirt 0.4.6
libvirt-python
vm-install 0.3.24
Then I proceeded to "make uninstall" in
xen-3.4-testing source tree, which also removed my self compiled Xen Dom 0
pvops enabled kernel, initrd and kernel modules.
After doing the above, I re-installed back the
Xen hypervisor, libraries and tools, and also the kernel, initrd, and
modules. Then I proceeded to reboot my machine. After rebooting, my CentOS
4.7 32-bit PV guest is still able to start and run!
I am still very puzzled! What causes the PV
guest initially cannot start? Then what subsequently causes the PV guest to
suddenly be able to start and run???
***scratches head***
Anyway my CentOS 4.7 guest domain is now
running. I shall now proceed to virtualize OpenSolaris 2009.06.
Thank you.
Also see screenshots of my CentOS 4.7 PV guest
here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net >
To:
"Teo En Ming" < enming.teo@asiasoftsea.net >, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc:
Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 22:54:26 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Hi Pasi,
It's very strange. Suddenly my CentOS 4.7
32-bit PV guest is able to start!!! Previously it refuses to start at all.
I think I must have changed something in Dom 0
when I attempted "yast --install virt-manager". This action might have
solved the problem. When I tried to install virt-manager, it also tries to
install xen-libs-3.3.1 and xen-tools-3.3.1 as dependencies. However, I
started off my Xen Dom 0 pvops kernel install with Xen 3.4.1 rc8 branch.
I need to investigate more why suddenly my
CentOS 4.7 32-bit PV guest is able to start.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net >
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 21:54:00 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Hi Pasi,
I realized that Fedora 10 32-bit anaconda
installer does not install PAE kernel after mounting the guest disk image
file. I mounted the guest disk image file using losetup and kpartx which
adds device nodes to /dev/mapper. I examined the /boot directory after
mounting the guest disk image file and found no PAE vmlinuz and initrd.
Still using the mounted Fedora 10 32-bit guest
disk image file, I changed root to the guest disk filesystems and attempted
to install the PAE kernel. Then I modified menu.lst to boot the PAE kernel.
After modifying the grub configuration of the guest domain, I un-mounted the
guest filesystem.
I proceeded to boot the F10 32-bit guest, since
I changed to PAE kernel. It is able to boot now (since the PAE kernel is
xen-aware) but then it complains cannot mount /dev/root. Probably something
to do with the PAE initrd file.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming < enming.teo@asiasoftsea.net >
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 16:31:19 +0300
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
On Fri, Jul 24, 2009 at 08:37:09PM +0800, Teo En Ming wrote:
> Hi
>
> I attempted to install Fedora 10 32-bit PV guest using
> images/pxeboot/vmlinuz-PAE and images/pxeboot/initrd-PAE.img from
the F10
> media. The non-PAE kernel could not load the installer. I finished
my Fedora
> 10 32-bit PV guest installation but it also cannot boot up after
> installation, same as the CentOS 4.7 PV guest installation.
>
Fedora 10 installer has a bug, as a default it installs non-PAE kernel
for
xen domU. You need to use a kickstart script (like this) to fix it:
http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
The important lines being:
-kernel
kernel-PAE
(Fedora 10 and Fedora 11 default kernels are compiled with pv_ops Xen
domU
support enabled, so there's no need for separate kernel-xen with these
distros).
Fedora 11 doesn't have that installer bug, so it installs right
out-of-the-box as Xen domU.
What's the error you get when you start the guest after installation?
Please paste the "xm log" as text.
I don't have any problems with CentOS 5.3 dom0.
-- Pasi
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline
Attachment Follows-----
_______________________________________________
Xen-devel
mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline
Attachment Follows-----
_______________________________________________
Xen-devel mailing
list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment
Follows-----
No virus found in this
outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus
Database: 270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline Attachment
Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing
message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database:
270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
No virus found in this outgoing message.
Checked by AVG -
www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09
18:01:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database:
270.13.30/2262 - Release Date: 07/25/09 18:01:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database:
270.13.30/2262 - Release Date: 07/25/09 18:01:00
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.13.24/2255 -
Release Date: 07/22/09 18:00:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 106507 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-27 10:18 Boris Derzhavets
0 siblings, 0 replies; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-27 10:18 UTC (permalink / raw)
To: xen-devel, enming.teo
[-- Attachment #1.1: Type: text/plain, Size: 72048 bytes --]
View:-
http://www.fsdaily.com/HighEnd/Disabling_checksum_offloading_at_install_OSOL_2009_06_PV_DomU_on_Xen_3_4_1_Ubuntu_9_04_Dom0
--- On Mon, 7/27/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 5:57 AM
Dear Boris,
My CentOS 4.7 32-bit PV guest is getting the dynamic IP address
assignment from the dnsmasq dhcp server I have setup and configured on Xen
Dom 0 OpenSUSE 11.1 32-bit host correctly.
So I think the issue is OpenSolaris specific.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com, enming.teo@asiasoftsea.net
Date: Mon, 27 Jul 2009 01:57:43 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Please, submit "brctl show"
Boris.
--- On Mon, 7/27/09, Teo En Ming
<enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 12:58 AM
Dear Boris,
I have changed my opensolaris vm configuration. Please see
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIVtghCI/AAAAAAAAAGE/ZGkYbBhhx5w/s1600-h/01.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIDWV0RI/AAAAAAAAAF8/aP9riPOEZyk/s1600-h/02.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHzY3WCI/AAAAAAAAAF0/gFxy7zJZXi8/s1600-h/03.jpeg
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHm0RO8I/AAAAAAAAAFs/hIgei-yTbx4/s1600-h/04.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHcUoQ_I/AAAAAAAAAFk/9AiZKPqmG80/s1600-h/05.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/Sm0zdXRfyuI/AAAAAAAAAGM/ZqOaIbmTzB8/s1600-h/06.jpeg
I see my OpenSolaris guest sending DHCPDISCOVER and my
OpenSUSE 11.1 32-bit Dom 0 Xen host sending DHCPOFFER but the OpenSolaris
virtual machine is not setting the offered dynamic IP address to it's
virtual NIC.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Boris Derzhavets" <bderzhavets@yahoo.com>
To: <xen-devel@lists.xensource.com>,
<enming.teo@asiasoftsea.net>
Date: Mon, 27 Jul 2009 13:01:54 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
View:-
http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run with static IP:-
pfexec svcadm disable network/physical:nwam
&& \
pfexec svcadm enable
network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0 192.168.1.102 netmask
255.255.255.0 mtu 1492
pfexec ifconfig xnf0 up
pfexec route add default 192.168.1.102
which i can/do @ installer time to use static IP
assignements. i just
can't seem to get them to 'stick' or 'be happy'
after reboot and xen,
run-time launch.
Use the same commands with the installed system.
To make the settings permanent you also need
(Jurgen Keil) :
echo 192.168.1.102 netmask 255.255.255.0 mtu 1492
> /etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 > /etc/defaultrouter
Boris.
--- On Sun,
7/26/09, Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net > wrote:
From: Mr. Teo En Ming (Zhang Enming) <
enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel] Unable to Configure Xen
Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com,
xen-devel@lists.xensource.com
Date: Sunday, July 26, 2009, 5:08 AM
I am
using static IP address.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
Does your OpenSuse 11.1
32-bit has static IP address or it obtain it via DHCP ?
If second option is in place please submit
# brctl show
Boris.
--- On
Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to
Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom"
<linux@eikelenboom.it>, bderzhavets@yahoo.com
, xen-devel@lists.xensource.com, Pasi Kr@yahoo.com
Date: Saturday, July 25, 2009, 10:50 PM
At the moment there is only one network card
installed on my lab PC in my company running OpenSUSE 11.1 32-bit with Xen
3.4.1-rc8 Dom 0 kernel 2.6.30-rc6 (jeremy). So when there are more network
cards installed, there will be eth0, eth1, eth2 ethernet bridges, etc.
Then I can assign the virtual network
card in each virtual machine to a specific ethernet network bridge (out of
many bridges) in Domain 0 using the vif command in guest domain
configuration.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Mr. Teo En Ming (Zhang Enming) wrote:
Dear Boris,
The ethernet network bridge on OpenSUSE
11.1 is eth0.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
This
means that OSOL installer (by default ) will issue DHCPDISCOVER via your Xen
bridge, looking for DHCP server on your LAN. Only on RHEL 5.3
(F10 with Xen 3.3.1 src.rpm been
installed along with generated packages) with libvirtd & dnsmasq up and
running you can specify
vif=['bridge=virbr0' ] to
detect DHCP Server at your Dom0.
View for instance :-
http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
I don't have any experience with
OpenSuse 11.1 . I hardly remind they tried to reproduce RH's technology.
Most probably they did it in SLES 11 (not sure). Check for
libvirtd&dnsmasq daemons up and running.
But if your OpenSuse 11.1 Dom0 is on
"dhcp" bridge itself , then no problems. Just vif=['bridge=eth0'].
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) < enming.teo@asiasoftsea.net >
wrote:
From: Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel] Unable to
Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com
Cc: "Sander Eikelenboom"
<linux@eikelenboom.it>, Pasi Kr@yahoo.com,
xen-devel@lists.xensource.com
Date: Saturday, July 25, 2009, 12:32
PM
Dear
Boris,
This means I have to install a DHCP
server or dnsmasq in my Dom 0, listening on my Dom 0's IP address, so that
it can assign dynamic IP addresses to the DomU.
By the way, are there any
paravirtualized device drivers that I can install in DomU to improve the
performance of the virtual machine?
Thank you.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
>I
noticed under the guest domain configuration there is a parameter called
>'extra' kernel parameter. Does the 'nowin' argument stand for no
>graphical windows?
Login as jack/jack to text
console.
Wait until :-
$ pfexec ifconfig -a
will show up your IPv4 address
$ mkdir .vnc
$ cp .Xclients .vnc/xstartup
$ vncserver
Connect via vncviewer IP-DomU:1
from another terminal session to OSOL DomU. In case OSOL installer will fail
to obtain IP via DHCPDISCOVER,
let me know. It might happen
and requires Solaris Kernel Model Debugger
to disable checksum offloading
at boot up. Seems to be hardware dependent issue for OSOL 2009.06
**********************************
Copy ramdisk and kernel to Dom0
**********************************
[root@ServerXen isos]# cat copy.sh
mount -o loop,ro osol-0906-x86.iso /mnt
cp /mnt/boot/amd64/x86.microroot /home/boris/solaris
cp /mnt/platform/i86xpv/kernel/amd64/unix /home/boris/solaris
***********************
Installation profile:-
***********************
[root@ServerXen solaris]# cat osol200906.install
name = "sol0906"
vcpus = 1
memory = "1024"
kernel = "/home/boris/solaris/unix"
ramdisk = "/home/boris/solaris/x86.microroot"
extra = "/platform/i86xpv/kernel/amd64/unix - nowin -B
install_media=cdrom"
disk = ['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
# Would work as well
# disk = ['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']
vif =
['bridge=eth1']
on_shutdown = "destroy"
on_reboot = "destroy"
on_crash = "destroy"
Boris
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net >
wrote:
From: Mr. Teo En Ming (Zhang
Enming) < enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel] Unable
to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom"
<linux@eikelenboom.it>, "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com,
=?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
Date: Saturday, July 25, 2009,
7:14 AM
Dear All,
I am trying to install
OpenSolaris 2009.06 32-bit paravirtualized guest on OpenSUSE 11.1 32-bit
paravirt-ops enabled Xen 3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6.
However, I am getting an
opensolaris console login prompt. There is no GNOME DE for me to launch the
GUI installer for OpenSolaris. I am using the OpenSolaris LiveCD 32-bit.
I noticed under the guest
domain configuration there is a parameter called 'extra' kernel parameter.
Does the 'nowin' argument stand for no graphical windows?
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
Then I also get the "invalid
disk device number (768)" error. Do I need to use xvda instead of hda?
Thank you very much.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo En Ming wrote:
As a matter of fact, our servers are either Dell PowerEdge 1950/2950 and IBM
xSeries.
I am just testing it out on our lab PC first.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone
: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <
enming.teo@asiasoftsea.net >
To: "Boris Derzhavets"
<bderzhavets@yahoo.com>, "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom
<linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Sat, 25 Jul 2009
02:27:02 +0800
Subject: Re: Re[8]:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Dear Boris,
My next step will be a 64-bit Xen Dom 0 host.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone
:
+65-9648-9798
MSN:
teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets
<bderzhavets@yahoo.com>
To: Pasi Kärkkäinen
<pasik@iki.fi>, enming.teo@asiasoftsea.net
Cc: Sander Eikelenboom
<linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009
10:57:49 -0700 (PDT)
Subject: Re: Re[8]:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Teo, it is up to you how to manage, if you just having fun.
Otherwise,
downloading 64-bit OpenSuse 11.1 ISO image
takes just 12-14 hr
even at slow ADSL speed ( like 100 KB/sec).
Install takes 30
minutes and brings you to the trusted results, instead
of wasting a lot of
time in case of business environment assignment.
Pasi has 32-bit
experience due to hardware limitations, which you don't
have.
Boris.
--- On Fri, 7/24/09, Teo En Ming < enming.teo@asiasoftsea.net >
wrote:
From: Teo En Ming
< enming.teo@asiasoftsea.net >
Subject: Re: Re[8]:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Boris
Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Friday, July
24, 2009, 12:56 PM
Dear Boris,
My colleague installed OpenSUSE 11.1 32-bit on the Core 2 Duo
machine in our labs. Please see my earlier replies in the same topic.
I was too lazy to reformat and install 64-bit OpenSUSE, so I
proceeded with Xen Dom 0 pvops kernel compilation on 32-bit Linux host.
I admit I am getting a lot of headache. Haha.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online
Pte Ltd
Tampines Central
1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone
:
+65-9648-9798
MSN:
teoenming@hotmail.com
-----Original Message-----
From: Boris
Derzhavets <bderzhavets@yahoo.com>
To:
enming.teo@asiasoftsea.net , Pasi Kärkkäinen <pasik@iki.fi>
Cc: Sander
Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul
2009 09:57:18 -0700 (PDT)
Subject: Re:
Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Once again, i don't see any reason to to run 32-bit OS on
Core2Duo,
unless you
like Xen head ache. Core development (PVOPS) is obviously
running in
64-bit environment.
Boris.
--- On
Fri, 7/24/09, Boris Derzhavets <bderzhavets@yahoo.com>
wrote:
From: Boris
Derzhavets <bderzhavets@yahoo.com>
Subject: Re:
Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
enming.teo@asiasoftsea.net , "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Friday,
July 24, 2009, 12:47 PM
>After doing the
above, I re-installed back the Xen hypervisor, libraries and tools, and also
>the kernel, initrd, and modules. Then I proceeded to reboot my machine.
After rebooting, > my CentOS 4.7 32-bit PV guest is still able to start
and run!
Why it
wouldn't ? If your image stays the same.
> I am still very puzzled! What causes the
PV guest initially cannot start? Then what >subsequently causes the PV
guest to suddenly be able to start and run???
That is
not supposed to happen. I would suggest clean OS (without any built in xen
presence) install , followed by Xen 3.4.1+pvops kernel clean install.
Boris.
--- On
Fri, 7/24/09, Teo En Ming < enming.teo@asiasoftsea.net >
wrote:
From:
Teo En Ming < enming.teo@asiasoftsea.net >
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To:
"Teo En Ming" < enming.teo@asiasoftsea.net >, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc:
"Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date:
Friday, July 24, 2009, 12:19 PM
Dear All,
I am very puzzled. In investigating the cause
of the sudden success of the CentOS 4.7 32-bit PV guest being able to run, I
have uninstalled virt-manager and all of its dependencies:
docbook
python-gtk-vnc
xen-libs 3.3.1
scrollkeeper
xen-tools 3.3.1
libvirt 0.4.6
libvirt-python
vm-install 0.3.24
Then I proceeded to "make uninstall" in
xen-3.4-testing source tree, which also removed my self compiled Xen Dom 0
pvops enabled kernel, initrd and kernel modules.
After doing the above, I re-installed back the
Xen hypervisor, libraries and tools, and also the kernel, initrd, and
modules. Then I proceeded to reboot my machine. After rebooting, my CentOS
4.7 32-bit PV guest is still able to start and run!
I am still very puzzled! What causes the PV
guest initially cannot start? Then what subsequently causes the PV guest to
suddenly be able to start and run???
***scratches head***
Anyway my CentOS 4.7 guest domain is now
running. I shall now proceed to virtualize OpenSolaris 2009.06.
Thank you.
Also see screenshots of my CentOS 4.7 PV guest
here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net >
To:
"Teo En Ming" < enming.teo@asiasoftsea.net >, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc:
Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 22:54:26 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Hi Pasi,
It's very strange. Suddenly my CentOS 4.7
32-bit PV guest is able to start!!! Previously it refuses to start at all.
I think I must have changed something in Dom 0
when I attempted "yast --install virt-manager". This action might have
solved the problem. When I tried to install virt-manager, it also tries to
install xen-libs-3.3.1 and xen-tools-3.3.1 as dependencies. However, I
started off my Xen Dom 0 pvops kernel install with Xen 3.4.1 rc8 branch.
I need to investigate more why suddenly my
CentOS 4.7 32-bit PV guest is able to start.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net >
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 21:54:00 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Hi Pasi,
I realized that Fedora 10 32-bit anaconda
installer does not install PAE kernel after mounting the guest disk image
file. I mounted the guest disk image file using losetup and kpartx which
adds device nodes to /dev/mapper. I examined the /boot directory after
mounting the guest disk image file and found no PAE vmlinuz and initrd.
Still using the mounted Fedora 10 32-bit guest
disk image file, I changed root to the guest disk filesystems and attempted
to install the PAE kernel. Then I modified menu.lst to boot the PAE kernel.
After modifying the grub configuration of the guest domain, I un-mounted the
guest filesystem.
I proceeded to boot the F10 32-bit guest, since
I changed to PAE kernel. It is able to boot now (since the PAE kernel is
xen-aware) but then it complains cannot mount /dev/root. Probably something
to do with the PAE initrd file.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming < enming.teo@asiasoftsea.net >
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 16:31:19 +0300
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
On Fri, Jul 24, 2009 at 08:37:09PM +0800, Teo En Ming wrote:
> Hi
>
> I attempted to install Fedora 10 32-bit PV guest using
> images/pxeboot/vmlinuz-PAE and images/pxeboot/initrd-PAE.img from
the F10
> media. The non-PAE kernel could not load the installer. I finished
my Fedora
> 10 32-bit PV guest installation but it also cannot boot up after
> installation, same as the CentOS 4.7 PV guest installation.
>
Fedora 10 installer has a bug, as a default it installs non-PAE kernel
for
xen domU. You need to use a kickstart script (like this) to fix it:
http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
The important lines being:
-kernel
kernel-PAE
(Fedora 10 and Fedora 11 default kernels are compiled with pv_ops Xen
domU
support enabled, so there's no need for separate kernel-xen with these
distros).
Fedora 11 doesn't have that installer bug, so it installs right
out-of-the-box as Xen domU.
What's the error you get when you start the guest after installation?
Please paste the "xm log" as text.
I don't have any problems with CentOS 5.3 dom0.
-- Pasi
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline
Attachment Follows-----
_______________________________________________
Xen-devel
mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline
Attachment Follows-----
_______________________________________________
Xen-devel mailing
list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment
Follows-----
No virus found in this
outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus
Database: 270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline Attachment
Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing
message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database:
270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
No virus found in this outgoing message.
Checked by AVG -
www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09
18:01:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database:
270.13.30/2262 - Release Date: 07/25/09 18:01:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database:
270.13.30/2262 - Release Date: 07/25/09 18:01:00
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.13.24/2255 -
Release Date: 07/22/09 18:00:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 106887 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-27 10:15 Boris Derzhavets
@ 2009-07-27 10:22 ` Teo En Ming
2009-07-27 11:25 ` Teo En Ming
0 siblings, 1 reply; 86+ messages in thread
From: Teo En Ming @ 2009-07-27 10:22 UTC (permalink / raw)
To: Boris Derzhavets, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 49280 bytes --]
Dear Boris,
I used the same ethernet network bridge in both installation and actually
running of the pv guest. During installation, dhcpdiscover was sent out by
the opensolaris pv guest. Dom 0 also sent out DHCPOFFER. However,
opensolaris pv guest could not configure the virtual network interface using
dhcp. So I had to manually configure the virtual network interface.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com, enming.teo@asiasoftsea.net
Cc:
Date: Mon, 27 Jul 2009 03:15:24 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
OK. What happens if you put the same vif=['bridge=...'] in OSOL installation
profile. Are you unable to get IP for install in this case ?
Boris.
--- On Mon, 7/27/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 5:57 AM
Dear Boris,
My CentOS 4.7 32-bit PV guest is getting the dynamic IP address
assignment from the dnsmasq dhcp server I have setup and configured on Xen
Dom 0 OpenSUSE 11.1 32-bit host correctly.
So I think the issue is OpenSolaris specific.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com, enming.teo@asiasoftsea.net
Date: Mon, 27 Jul 2009 01:57:43 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Please, submit "brctl show"
Boris.
--- On Mon, 7/27/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 12:58 AM
Dear Boris,
I have changed my opensolaris vm configuration. Please see
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIVtghCI/AAAAAAAAAGE/ZGkYbBhhx5w/s1600-h/01.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIDWV0RI/AAAAAAAAAF8/aP9riPOEZyk/s1600-h/02.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHzY3WCI/AAAAAAAAAF0/gFxy7zJZXi8/s1600-h/03.jpeg
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHm0RO8I/AAAAAAAAAFs/hIgei-yTbx4/s1600-h/04.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHcUoQ_I/AAAAAAAAAFk/9AiZKPqmG80/s1600-h/05.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/Sm0zdXRfyuI/AAAAAAAAAGM/ZqOaIbmTzB8/s1600-h/06.jpeg
I see my OpenSolaris guest sending DHCPDISCOVER and my
OpenSUSE 11.1 32-bit Dom 0 Xen host sending DHCPOFFER but the OpenSolaris
virtual machine is not setting the offered dynamic IP address to it's
virtual NIC.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Boris Derzhavets" <bderzhavets@yahoo.com>
To: <xen-devel@lists.xensource.com>,
<enming.teo@asiasoftsea.net>
Date: Mon, 27 Jul 2009 13:01:54 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
View:-
http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run with static IP:-
pfexec svcadm disable network/physical:nwam
&& \
pfexec svcadm enable
network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0 192.168.1.102 netmask
255.255.255.0 mtu 1492
pfexec ifconfig xnf0 up
pfexec route add default 192.168.1.102
which i can/do @ installer time to use static IP
assignements. i just
can't seem to get them to 'stick' or 'be happy'
after reboot and xen,
run-time launch.
Use the same commands with the installed system.
To make the settings permanent you also need
(Jurgen Keil) :
echo 192.168.1.102 netmask 255.255.255.0 mtu 1492
> /etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 > /etc/defaultrouter
Boris.
--- On Sun,
7/26/09, Mr. Teo En Ming (Zhang Enming) < enming.teo@asiasoftsea.net >
wrote:
From: Mr. Teo En Ming (Zhang Enming) <
enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel] Unable to Configure Xen
Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com,
xen-devel@lists.xensource.com
Date: Sunday, July 26, 2009, 5:08 AM
I am
using static IP address.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
Does your OpenSuse 11.1
32-bit has static IP address or it obtain it via DHCP ?
If second option is in place please submit
# brctl show
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
<enming.teo@asiasoftsea.net> wrote:
From: Mr. Teo En Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to
Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, bderzhavets@yahoo.com
, xen-devel@lists.xensource.com, Pasi Kr@yahoo.com
Date: Saturday, July 25, 2009, 10:50 PM
At the moment there is only one network card
installed on my lab PC in my company running OpenSUSE 11.1 32-bit with Xen
3.4.1-rc8 Dom 0 kernel 2.6.30-rc6 (jeremy). So when there are more network
cards installed, there will be eth0, eth1, eth2 ethernet bridges, etc.
Then I can assign the virtual network
card in each virtual machine to a specific ethernet network bridge (out of
many bridges) in Domain 0 using the vif command in guest domain
configuration.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Mr. Teo En Ming (Zhang Enming) wrote:
Dear Boris,
The ethernet network bridge on OpenSUSE
11.1 is eth0.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
This
means that OSOL installer (by default ) will issue DHCPDISCOVER via your Xen
bridge, looking for DHCP server on your LAN. Only on RHEL 5.3
(F10 with Xen 3.3.1 src.rpm been
installed along with generated packages) with libvirtd & dnsmasq up and
running you can specify
vif=['bridge=virbr0' ] to
detect DHCP Server at your Dom0.
View for instance :-
http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
[http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/]
I don't have any experience with
OpenSuse 11.1 . I hardly remind they tried to reproduce RH's technology.
Most probably they did it in SLES 11 (not sure). Check for
libvirtd&dnsmasq daemons up and running.
But if your OpenSuse 11.1 Dom0 is on
"dhcp" bridge itself , then no problems. Just vif=['bridge=eth0'].
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <
enming.teo@asiasoftsea.net > wrote:
From: Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel] Unable to
Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com
Cc: "Sander Eikelenboom"
<linux@eikelenboom.it>, Pasi Kr@yahoo.com,
xen-devel@lists.xensource.com
Date: Saturday, July 25, 2009, 12:32
PM
Dear
Boris,
This means I have to install a DHCP
server or dnsmasq in my Dom 0, listening on my Dom 0's IP address, so that
it can assign dynamic IP addresses to the DomU.
By the way, are there any
paravirtualized device drivers that I can install in DomU to improve the
performance of the virtual machine?
Thank you.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
>I
noticed under the guest domain configuration there is a parameter called
>'extra' kernel parameter. Does the 'nowin' argument stand for no
>graphical windows?
Login as jack/jack to text
console.
Wait until :-
$ pfexec ifconfig -a
will show up your IPv4 address
$ mkdir .vnc
$ cp .Xclients .vnc/xstartup
$ vncserver
Connect via vncviewer IP-DomU:1
from another terminal session to OSOL DomU. In case OSOL installer will fail
to obtain IP via DHCPDISCOVER,
let me know. It might happen
and requires Solaris Kernel Model Debugger
to disable checksum offloading
at boot up. Seems to be hardware dependent issue for OSOL 2009.06
**********************************
Copy ramdisk and kernel to Dom0
**********************************[root@ServerXen isos]# cat copy.sh
mount -o loop,ro osol-0906-x86.iso /mnt
cp /mnt/boot/amd64/x86.microroot /home/boris/solaris
cp /mnt/platform/i86xpv/kernel/amd64/unix
/home/boris/solaris***********************
Installation profile:-
***********************[root@ServerXen solaris]# cat osol200906.install
name = "sol0906"
vcpus = 1
memory = "1024"
kernel = "/home/boris/solaris/unix"
ramdisk = "/home/boris/solaris/x86.microroot"
extra = "/platform/i86xpv/kernel/amd64/unix - nowin -B
install_media=cdrom"
disk = ['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
# Would work as well
# disk = ['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w'] vif =
['bridge=eth1']on_shutdown = "destroy"
on_reboot = "destroy"
on_crash = "destroy"Boris
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <
enming.teo@asiasoftsea.net > wrote:
From: Mr. Teo En Ming (Zhang
Enming) < enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel] Unable
to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom"
<linux@eikelenboom.it>, "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com,
=?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
Date: Saturday, July 25, 2009,
7:14 AM
Dear All,
I am trying to install
OpenSolaris 2009.06 32-bit paravirtualized guest on OpenSUSE 11.1 32-bit
paravirt-ops enabled Xen 3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6.
However, I am getting an
opensolaris console login prompt. There is no GNOME DE for me to launch the
GUI installer for OpenSolaris. I am using the OpenSolaris LiveCD 32-bit.
I noticed under the guest
domain configuration there is a parameter called 'extra' kernel parameter.
Does the 'nowin' argument stand for no graphical windows?
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
[http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg]
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
[http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg]
http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
[http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg]
Then I also get the "invalid
disk device number (768)" error. Do I need to use xvda instead of hda?
Thank you very much.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo En Ming wrote:
As a matter of fact, our servers are either Dell PowerEdge 1950/2950 and IBM
xSeries.
I am just testing it out on our lab PC first.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore 529541
Republicof Singapore
Mobile Phone
: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <
enming.teo@asiasoftsea.net >
To: "Boris Derzhavets"
<bderzhavets@yahoo.com>, "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom
<linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Sat, 25 Jul 2009
02:27:02 +0800
Subject: Re: Re[8]:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Dear Boris,
My next step will be a 64-bit Xen Dom 0 host.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore 529541
Republicof Singapore
Mobile Phone:
+65-9648-9798
MSN:
teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets
<bderzhavets@yahoo.com>
To: Pasi Kärkkäinen
<pasik@iki.fi>, enming.teo@asiasoftsea.net
Cc: Sander Eikelenboom
<linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009
10:57:49 -0700 (PDT)
Subject: Re: Re[8]:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Teo, it is up to you how to manage, if you just having fun.
Otherwise,
downloading 64-bit OpenSuse 11.1 ISO image
takes just 12-14 hr
even at slow ADSL speed ( like 100 KB/sec).
Install takes 30
minutes and brings you to the trusted results, instead
of wasting a lot of
time in case of business environment assignment.
Pasi has 32-bit
experience due to hardware limitations, which you don't
have.
Boris.
--- On Fri, 7/24/09, Teo En Ming < enming.teo@asiasoftsea.net > wrote:
From: Teo En Ming
< enming.teo@asiasoftsea.net >
Subject: Re: Re[8]:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Boris
Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Friday, July
24, 2009, 12:56 PM
Dear Boris,
My colleague installed OpenSUSE 11.1 32-bit on the Core 2 Duo
machine in our labs. Please see my earlier replies in the same topic.
I was too lazy to reformat and install 64-bit OpenSUSE, so I
proceeded with Xen Dom 0 pvops kernel compilation on 32-bit Linux host.
I admit I am getting a lot of headache. Haha.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online
Pte Ltd
Tampines Central
1 #04-01 Tampines Plaza
Singapore 529541
Republicof Singapore
Mobile Phone:
+65-9648-9798
MSN:
teoenming@hotmail.com
-----Original Message-----
From: Boris
Derzhavets <bderzhavets@yahoo.com>
To:
enming.teo@asiasoftsea.net , Pasi Kärkkäinen <pasik@iki.fi>
Cc: Sander
Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24 Jul
2009 09:57:18 -0700 (PDT)
Subject: Re:
Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Once again, i don't see any reason to to run 32-bit OS on
Core2Duo,
unless you
like Xen head ache. Core development (PVOPS) is obviously
running in
64-bit environment.
Boris.
--- On Fri, 7/24/09, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
From: Boris
Derzhavets <bderzhavets@yahoo.com>
Subject: Re:
Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
enming.teo@asiasoftsea.net , "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Friday,
July 24, 2009, 12:47 PM
>After doing the
above, I re-installed back the Xen hypervisor, libraries and tools, and also
>the kernel, initrd, and modules. Then I proceeded to reboot my machine.
After rebooting, > my CentOS 4.7 32-bit PV guest is still able to start
and run!Why it
wouldn't ? If your image stays the same.
> I am still very puzzled! What causes the
PV guest initially cannot start? Then what >subsequently causes the PV
guest to suddenly be able to start and run???
That is
not supposed to happen. I would suggest clean OS (without any built in xen
presence) install , followed by Xen 3.4.1+pvops kernel clean install.
Boris.
--- On
Fri, 7/24/09, Teo En Ming < enming.teo@asiasoftsea.net > wrote:
From:
Teo En Ming < enming.teo@asiasoftsea.net >
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To:
"Teo En Ming" < enming.teo@asiasoftsea.net >, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc:
"Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date:
Friday, July 24, 2009, 12:19 PM
Dear All,
I am very puzzled. In investigating the cause
of the sudden success of the CentOS 4.7 32-bit PV guest being able to run, I
have uninstalled virt-manager and all of its dependencies:
docbook
python-gtk-vnc
xen-libs 3.3.1
scrollkeeper
xen-tools 3.3.1
libvirt 0.4.6
libvirt-python
vm-install 0.3.24
Then I proceeded to "make uninstall" in
xen-3.4-testing source tree, which also removed my self compiled Xen Dom 0
pvops enabled kernel, initrd and kernel modules.
After doing the above, I re-installed back the
Xen hypervisor, libraries and tools, and also the kernel, initrd, and
modules. Then I proceeded to reboot my machine. After rebooting, my CentOS
4.7 32-bit PV guest is still able to start and run!
I am still very puzzled! What causes the PV
guest initially cannot start? Then what subsequently causes the PV guest to
suddenly be able to start and run???
***scratches head***
Anyway my CentOS 4.7 guest domain is now
running. I shall now proceed to virtualize OpenSolaris 2009.06.
Thank you.
Also see screenshots of my CentOS 4.7 PV guest
here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html]
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republicof Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net >
To:
"Teo En Ming" < enming.teo@asiasoftsea.net >, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc:
Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 22:54:26 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Hi Pasi,
It's very strange. Suddenly my CentOS 4.7
32-bit PV guest is able to start!!! Previously it refuses to start at all.
I think I must have changed something in Dom 0
when I attempted "yast --install virt-manager". This action might have
solved the problem. When I tried to install virt-manager, it also tries to
install xen-libs-3.3.1 and xen-tools-3.3.1 as dependencies. However, I
started off my Xen Dom 0 pvops kernel install with Xen 3.4.1 rc8 branch.
I need to investigate more why suddenly my
CentOS 4.7 32-bit PV guest is able to start.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net >
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 21:54:00 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Hi Pasi,
I realized that Fedora 10 32-bit anaconda
installer does not install PAE kernel after mounting the guest disk image
file. I mounted the guest disk image file using losetup and kpartx which
adds device nodes to /dev/mapper. I examined the /boot directory after
mounting the guest disk image file and found no PAE vmlinuz and initrd.
Still using the mounted Fedora 10 32-bit guest
disk image file, I changed root to the guest disk filesystems and attempted
to install the PAE kernel. Then I modified menu.lst to boot the PAE kernel.
After modifying the grub configuration of the guest domain, I un-mounted the
guest filesystem.
I proceeded to boot the F10 32-bit guest, since
I changed to PAE kernel. It is able to boot now (since the PAE kernel is
xen-aware) but then it complains cannot mount /dev/root. Probably something
to do with the PAE initrd file.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming < enming.teo@asiasoftsea.net >
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 16:31:19 +0300
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
On Fri, Jul 24, 2009 at 08:37:09PM +0800, Teo En Ming wrote:
> Hi
>
> I attempted to install Fedora 10 32-bit PV guest using
> images/pxeboot/vmlinuz-PAE and images/pxeboot/initrd-PAE.img from
the F10
> media. The non-PAE kernel could not load the installer. I finished
my Fedora
> 10 32-bit PV guest installation but it also cannot boot up after
> installation, same as the CentOS 4.7 PV guest installation.
>
Fedora 10 installer has a bug, as a default it installs non-PAE kernel
for
xen domU. You need to use a kickstart script (like this) to fix it:
http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
[http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg]
The important lines being:
-kernel
kernel-PAE
(Fedora 10 and Fedora 11 default kernels are compiled with pv_ops Xen
domU
support enabled, so there's no need for separate kernel-xen with these
distros).
Fedora 11 doesn't have that installer bug, so it installs right
out-of-the-box as Xen domU.
What's the error you get when you start the guest after installation?
Please paste the "xm log" as text.
I don't have any problems with CentOS 5.3 dom0.
-- Pasi
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
-----Inline
Attachment Follows-----
_______________________________________________
Xen-devel
mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
-----Inline
Attachment Follows-----
_______________________________________________
Xen-devel mailing
list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline Attachment
Follows-----
No virus found in this
outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 / Virus
Database: 270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline Attachment
Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
No virus found in this outgoing
message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 / Virus Database:
270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
No virus found in this outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09
18:01:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 / Virus Database:
270.13.30/2262 - Release Date: 07/25/09 18:01:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database:
270.13.30/2262 - Release Date: 07/25/09 18:01:00
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.13.24/2255 -
Release Date: 07/22/09 18:00:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 120280 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-27 11:17 Boris Derzhavets
0 siblings, 0 replies; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-27 11:17 UTC (permalink / raw)
To: xen-devel, enming.teo
[-- Attachment #1.1: Type: text/plain, Size: 84819 bytes --]
Can you run
# tcpdump -s 1600 -vv >log & at Dom0
and check for wrong udp checksums at the time of issueing DHCPDISCOVER by OSOL installer. When Dom0 send to DomU DHCPOFFER, i would run same command at DomU.
Finally, i would capture tcpdump logs at Dom0 and at DomU when you fail
to obtain IP address for OSOL DomU, what causes udp packages to get discarded at corresponding ethetnet interface.
It looks for me as failure of checksums offloading.
Boris.
--- On Mon, 7/27/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 6:22 AM
Dear Boris,
I used the same ethernet network bridge in both installation and
actually running of the pv guest. During installation, dhcpdiscover was sent
out by the opensolaris pv guest. Dom 0 also sent out DHCPOFFER. However,
opensolaris pv guest could not configure the virtual network interface using
dhcp. So I had to manually configure the virtual network interface.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com, enming.teo@asiasoftsea.net
Cc:
Date: Mon, 27 Jul 2009 03:15:24 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
OK. What happens if you put the same vif=['bridge=...'] in OSOL
installation
profile. Are you unable to get IP for install in this case ?
Boris.
--- On Mon, 7/27/09, Teo En Ming
<enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 5:57 AM
Dear Boris,
My CentOS 4.7 32-bit PV guest is getting the dynamic IP
address assignment from the dnsmasq dhcp server I have setup and configured
on Xen Dom 0 OpenSUSE 11.1 32-bit host correctly.
So I think the issue is OpenSolaris specific.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com,
enming.teo@asiasoftsea.net
Date: Mon, 27 Jul 2009 01:57:43 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Please, submit "brctl show"
Boris.
--- On Mon, 7/27/09, Teo En Ming
<enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom
0 in Jeremy's PVOPS Kernel
To: "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 12:58 AM
Dear Boris,
I have changed my opensolaris vm configuration.
Please see
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIVtghCI/AAAAAAAAAGE/ZGkYbBhhx5w/s1600-h/01.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIDWV0RI/AAAAAAAAAF8/aP9riPOEZyk/s1600-h/02.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHzY3WCI/AAAAAAAAAF0/gFxy7zJZXi8/s1600-h/03.jpeg
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHm0RO8I/AAAAAAAAAFs/hIgei-yTbx4/s1600-h/04.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHcUoQ_I/AAAAAAAAAFk/9AiZKPqmG80/s1600-h/05.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/Sm0zdXRfyuI/AAAAAAAAAGM/ZqOaIbmTzB8/s1600-h/06.jpeg
I see my OpenSolaris guest sending DHCPDISCOVER and
my OpenSUSE 11.1 32-bit Dom 0 Xen host sending DHCPOFFER but the OpenSolaris
virtual machine is not setting the offered dynamic IP address to it's
virtual NIC.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Boris Derzhavets"
<bderzhavets@yahoo.com>
To: <xen-devel@lists.xensource.com>,
<enming.teo@asiasoftsea.net>
Date: Mon, 27 Jul 2009 13:01:54 +0800
Subject: Re: [Xen-devel] Unable to Configure
Xen Dom 0 in Jeremy's PVOPS Kernel
View:-
http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run with static
IP:-
pfexec svcadm disable
network/physical:nwam && \
pfexec svcadm enable
network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0 192.168.1.102
netmask 255.255.255.0 mtu 1492
pfexec ifconfig xnf0 up
pfexec route add default 192.168.1.102
which i can/do @ installer time to use
static IP assignements. i just
can't seem to get them to 'stick' or
'be happy' after reboot and xen,
run-time launch.
Use the same commands with the
installed system.
To make the settings permanent you also
need (Jurgen Keil) :
echo 192.168.1.102 netmask
255.255.255.0 mtu 1492 > /etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 >
/etc/defaultrouter
Boris.
--- On Sun, 7/26/09, Mr. Teo En Ming (Zhang Enming) < enming.teo@asiasoftsea.net >
wrote:
From: Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel] Unable to
Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com,
xen-devel@lists.xensource.com
Date: Sunday, July 26, 2009, 5:08
AM
I am using static IP address.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
Does
your OpenSuse 11.1 32-bit has static IP address or it obtain it via DHCP ?
If second option is in place
please submit
# brctl show
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
<enming.teo@asiasoftsea.net> wrote:
From: Mr. Teo En Ming (Zhang
Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable
to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
bderzhavets@yahoo.com ,
xen-devel@lists.xensource.com, Pasi Kr@yahoo.com
Date: Saturday, July 25, 2009,
10:50 PM
At the moment there is only
one network card installed on my lab PC in my company running OpenSUSE 11.1
32-bit with Xen 3.4.1-rc8 Dom 0 kernel 2.6.30-rc6 (jeremy). So when there
are more network cards installed, there will be eth0, eth1, eth2 ethernet
bridges, etc.
Then I can assign the virtual
network card in each virtual machine to a specific ethernet network bridge
(out of many bridges) in Domain 0 using the vif command in guest domain
configuration.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Mr. Teo En Ming (Zhang Enming)
wrote:
Dear Boris,
The ethernet network bridge on
OpenSUSE 11.1 is eth0.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
This means that OSOL installer (by default ) will issue
DHCPDISCOVER via your Xen bridge, looking for DHCP server on your LAN. Only
on RHEL 5.3
(F10 with Xen 3.3.1 src.rpm
been installed along with generated packages) with libvirtd & dnsmasq up
and running you can specify
vif=['bridge=virbr0'
] to detect DHCP Server at your Dom0.
View for instance :-
http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
I don't have any experience
with OpenSuse 11.1 . I hardly remind they tried to reproduce RH's
technology. Most probably they did it in SLES 11 (not sure). Check for
libvirtd&dnsmasq daemons up and running.
But if your OpenSuse 11.1
Dom0 is on "dhcp" bridge itself , then no problems. Just
vif=['bridge=eth0'].
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net
> wrote:
From: Mr. Teo En Ming
(Zhang Enming) < enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel]
Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com
Cc: "Sander Eikelenboom"
<linux@eikelenboom.it>, Pasi Kr@yahoo.com,
xen-devel@lists.xensource.com
Date: Saturday, July 25,
2009, 12:32 PM
Dear Boris,
This means I have to
install a DHCP server or dnsmasq in my Dom 0, listening on my Dom 0's IP
address, so that it can assign dynamic IP addresses to the DomU.
By the way, are there any
paravirtualized device drivers that I can install in DomU to improve the
performance of the virtual machine?
Thank you.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
>I noticed under the guest domain configuration there is a parameter
called >'extra' kernel parameter. Does the 'nowin' argument stand for no
>graphical windows?
Login as jack/jack to
text console.
Wait until :-
$ pfexec ifconfig -a
will show up your
IPv4 address
$ mkdir .vnc
$ cp .Xclients
.vnc/xstartup
$ vncserver
Connect via vncviewer
IP-DomU:1 from another terminal session to OSOL DomU. In case OSOL installer
will fail to obtain IP via DHCPDISCOVER,
let me know. It might
happen and requires Solaris Kernel Model Debugger
to disable checksum
offloading at boot up. Seems to be hardware dependent issue for OSOL 2009.06
**********************************
Copy ramdisk and
kernel to Dom0
**********************************
[root@ServerXen isos]# cat copy.sh
mount -o loop,ro osol-0906-x86.iso /mnt
cp /mnt/boot/amd64/x86.microroot
/home/boris/solaris
cp /mnt/platform/i86xpv/kernel/amd64/unix
/home/boris/solaris
***********************
Installation
profile:-
***********************
[root@ServerXen solaris]# cat osol200906.install
name = "sol0906"
vcpus = 1
memory = "1024"
kernel = "/home/boris/solaris/unix"
ramdisk = "/home/boris/solaris/x86.microroot"
extra = "/platform/i86xpv/kernel/amd64/unix - nowin -B
install_media=cdrom"
disk =
['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
# Would work as well
# disk =
['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']
vif =
['bridge=eth1']
on_shutdown = "destroy"
on_reboot = "destroy"
on_crash = "destroy"
Boris
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net >
wrote:
From: Mr. Teo En Ming
(Zhang Enming) < enming.teo@asiasoftsea.net >
Subject: Re:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
enming.teo@asiasoftsea.net
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com,
=?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
Date: Saturday, July
25, 2009, 7:14 AM
Dear All,
I am trying to
install OpenSolaris 2009.06 32-bit paravirtualized guest on OpenSUSE 11.1
32-bit paravirt-ops enabled Xen 3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6.
However, I am
getting an opensolaris console login prompt. There is no GNOME DE for me to
launch the GUI installer for OpenSolaris. I am using the OpenSolaris LiveCD
32-bit.
I noticed under the
guest domain configuration there is a parameter called 'extra' kernel
parameter. Does the 'nowin' argument stand for no graphical windows?
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
Then I also get the
"invalid disk device number (768)" error. Do I need to use xvda instead of
hda?
Thank you very
much.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo En Ming wrote:
As a matter of fact, our servers are either Dell PowerEdge
1950/2950 and IBM xSeries.
I am just testing it out on our lab PC first.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online
Pte Ltd
Tampines Central
1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile
Phone : +65-9648-9798
MSN:
teoenming@hotmail.com
-----Original Message-----
From: "Teo En
Ming" < enming.teo@asiasoftsea.net >
To: "Boris
Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: Sander
Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Sat, 25 Jul
2009 02:27:02 +0800
Subject: Re:
Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Dear Boris,
My next step will be a 64-bit Xen Dom 0 host.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online
Pte Ltd
Tampines
Central 1 #04-01 Tampines Plaza
Singapore
529541
Republic of Singapore
Mobile
Phone
: +65-9648-9798
MSN:
teoenming@hotmail.com
-----Original Message-----
From: Boris
Derzhavets <bderzhavets@yahoo.com>
To: Pasi
Kärkkäinen <pasik@iki.fi>, enming.teo@asiasoftsea.net
Cc: Sander
Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24
Jul 2009 10:57:49 -0700 (PDT)
Subject: Re:
Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Teo, it is up to you how to manage, if you
just having fun.
Otherwise,
downloading 64-bit OpenSuse 11.1 ISO image
takes just
12-14 hr even at slow ADSL speed ( like 100 KB/sec).
Install
takes 30 minutes and brings you to the trusted results, instead
of wasting
a lot of time in case of business environment assignment.
Pasi has
32-bit experience due to hardware limitations, which you don't
have.
Boris.
--- On
Fri, 7/24/09, Teo En Ming < enming.teo@asiasoftsea.net >
wrote:
From: Teo
En Ming < enming.teo@asiasoftsea.net >
Subject:
Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
To: "Boris
Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date:
Friday, July 24, 2009, 12:56 PM
Dear Boris,
My colleague installed OpenSUSE 11.1 32-bit on
the Core 2 Duo machine in our labs. Please see my earlier replies in the
same topic.
I was too lazy to reformat and install 64-bit
OpenSUSE, so I proceeded with Xen Dom 0 pvops kernel compilation on 32-bit
Linux host.
I admit I am getting a lot of headache. Haha.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile
Phone
: +65-9648-9798
MSN:
teoenming@hotmail.com
-----Original
Message-----
From:
Boris Derzhavets <bderzhavets@yahoo.com>
To:
enming.teo@asiasoftsea.net , Pasi Kärkkäinen <pasik@iki.fi>
Cc:
Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date:
Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Once again, i don't see any reason to to run
32-bit OS on Core2Duo,
unless you like Xen head ache. Core development (PVOPS) is obviously
running in 64-bit environment.
Boris.
---
On Fri, 7/24/09, Boris Derzhavets
<bderzhavets@yahoo.com>
wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To:
enming.teo@asiasoftsea.net , "Pasi Kärkkäinen" <pasik@iki.fi>
Cc:
"Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:47 PM
>After doing the
above, I re-installed back the Xen hypervisor, libraries and tools, and also
>the kernel, initrd, and modules. Then I proceeded to reboot my machine.
After rebooting, > my CentOS 4.7 32-bit PV guest is still able to start
and run!
Why it wouldn't ? If your image stays the same.
> I am still very puzzled! What causes the
PV guest initially cannot start? Then what >subsequently causes the PV
guest to suddenly be able to start and run???
That is not supposed to happen. I would suggest clean OS (without any
built in xen presence) install , followed by Xen 3.4.1+pvops kernel
clean install.
Boris.
--- On Fri, 7/24/09, Teo En Ming
< enming.teo@asiasoftsea.net >
wrote:
From: Teo En Ming < enming.teo@asiasoftsea.net >
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: "Teo En Ming" < enming.teo@asiasoftsea.net >, "Pasi
Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:19 PM
Dear All,
I am very puzzled. In
investigating the cause of the sudden success of the CentOS 4.7 32-bit PV
guest being able to run, I have uninstalled virt-manager and all of its
dependencies:
docbook
python-gtk-vnc
xen-libs 3.3.1
scrollkeeper
xen-tools 3.3.1
libvirt 0.4.6
libvirt-python
vm-install 0.3.24
Then I proceeded to "make
uninstall" in xen-3.4-testing source tree, which also removed my self
compiled Xen Dom 0 pvops enabled kernel, initrd and kernel modules.
After doing the above, I
re-installed back the Xen hypervisor, libraries and tools, and also the
kernel, initrd, and modules. Then I proceeded to reboot my machine. After
rebooting, my CentOS 4.7 32-bit PV guest is still able to start and run!
I am still very puzzled! What
causes the PV guest initially cannot start? Then what subsequently causes
the PV guest to suddenly be able to start and run???
***scratches head***
Anyway my CentOS 4.7 guest
domain is now running. I shall now proceed to virtualize OpenSolaris
2009.06.
Thank you.
Also see screenshots of my
CentOS 4.7 PV guest here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net >
To: "Teo En Ming" < enming.teo@asiasoftsea.net >, "Pasi
Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 22:54:26 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Hi Pasi,
It's very strange. Suddenly my CentOS 4.7
32-bit PV guest is able to start!!! Previously it refuses to start at all.
I think I must have changed something in Dom 0
when I attempted "yast --install virt-manager". This action might have
solved the problem. When I tried to install virt-manager, it also tries to
install xen-libs-3.3.1 and xen-tools-3.3.1 as dependencies. However, I
started off my Xen Dom 0 pvops kernel install with Xen 3.4.1 rc8 branch.
I need to investigate more why suddenly my
CentOS 4.7 32-bit PV guest is able to start.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net >
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 21:54:00 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Hi Pasi,
I realized that Fedora 10
32-bit anaconda installer does not install PAE kernel after mounting the
guest disk image file. I mounted the guest disk image file using losetup and
kpartx which adds device nodes to /dev/mapper. I examined the /boot
directory after mounting the guest disk image file and found no PAE vmlinuz
and initrd.
Still using the mounted
Fedora 10 32-bit guest disk image file, I changed root to the guest disk
filesystems and attempted to install the PAE kernel. Then I modified
menu.lst to boot the PAE kernel. After modifying the grub configuration of
the guest domain, I un-mounted the guest filesystem.
I proceeded to boot the F10
32-bit guest, since I changed to PAE kernel. It is able to boot now (since
the PAE kernel is xen-aware) but then it complains cannot mount /dev/root.
Probably something to do with the PAE initrd file.
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming < enming.teo@asiasoftsea.net >
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 16:31:19 +0300
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
On Fri, Jul 24, 2009 at 08:37:09PM +0800, Teo En
Ming wrote:
> Hi
>
> I attempted to install Fedora 10 32-bit PV guest using
> images/pxeboot/vmlinuz-PAE and
images/pxeboot/initrd-PAE.img from the F10
> media. The non-PAE kernel could not load the installer. I
finished my Fedora
> 10 32-bit PV guest installation but it also cannot boot up
after
> installation, same as the CentOS 4.7 PV guest installation.
>
Fedora 10 installer has a bug, as a default it installs non-PAE
kernel for
xen domU. You need to use a kickstart script (like this) to fix
it:
http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
The important lines being:
-kernel
kernel-PAE
(Fedora 10 and Fedora 11 default kernels are compiled with
pv_ops Xen domU
support enabled, so there's no need for separate kernel-xen with
these distros).
Fedora 11 doesn't have that installer bug, so it installs right
out-of-the-box as Xen domU.
What's the error you get when you start the guest after
installation?
Please paste the "xm log" as text.
I don't have any problems with CentOS 5.3 dom0.
-- Pasi
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline
Attachment Follows-----
_______________________________________________
Xen-devel
mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline
Attachment Follows-----
No virus found in
this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 /
Virus Database: 270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline
Attachment Follows-----
_______________________________________________
Xen-devel mailing
list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment
Follows-----
No virus found in this
outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus
Database: 270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline Attachment
Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
No virus found in this outgoing message.
Checked by AVG -
www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09
18:01:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment
Follows-----
No virus found in this outgoing
message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus
Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
-----Inline Attachment
Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment
Follows-----
No virus found in this outgoing
message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database:
270.13.30/2262 - Release Date: 07/25/09 18:01:00
No virus found in this incoming
message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database:
270.13.24/2255 - Release Date: 07/22/09 18:00:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 120293 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-27 10:22 ` Teo En Ming
@ 2009-07-27 11:25 ` Teo En Ming
0 siblings, 0 replies; 86+ messages in thread
From: Teo En Ming @ 2009-07-27 11:25 UTC (permalink / raw)
To: Teo En Ming, Boris Derzhavets, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 57150 bytes --]
Dear All,
I am now able to run OpenSolaris 2009.06 32-bit paravirtualized on Xen
3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6 on OpenSUSE 11.1 32-bit.
However, there are still some outstanding configuration issues as I am not
very familiar with Solaris UNIX. I am more of a Linux guy.
1) I need to edit ~/.vnc/xstartup so that it will launch a GUI interface
instead of a text console. During installation, I was able to copy .Xclients
to xstartup but after installation, .Xclients do not exist anymore under my
personal account. I have configured vncserver before in Linux and I was able
to port the GNOME desktop to my remote vnc client.
2) I could not hard code IP address (static definition, not dhcp) and
network settings inside OpenSolaris like what I usually do in Linux. It
seems that configuring /etc/hostname.xnf0 did not help. My VM's actual
hostname is "opensolaris", so do I change that to /etc/opensolaris.xnf0?
After OpenSolaris PV guest boots up, I had to manually configure the IP
address, netmask and default route.
3) Configuring name servers in /etc/resolv.conf inside Solaris did not work.
But I could still go out to the internet by pinging the IP addresses of
Singapore's Starhub and Singnet ISP DNS servers. Just that name resolution
didn't work on Solaris.
Please see the screenshots here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-opensolaris-unix-200906-32-bit.html
More questions:
4) Are there any paravirtualized device drivers/tools I can install inside
PV guests to enhance VM's performance? Like VMware tools?
5) Are there any benchmarking tools to measure I/O throughput of my PV
guests?
Thank you very much.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Cc:
Date: Mon, 27 Jul 2009 18:22:17 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Dear Boris,
I used the same ethernet network bridge in both installation and
actually running of the pv guest. During installation, dhcpdiscover was sent
out by the opensolaris pv guest. Dom 0 also sent out DHCPOFFER. However,
opensolaris pv guest could not configure the virtual network interface using
dhcp. So I had to manually configure the virtual network interface.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com, enming.teo@asiasoftsea.net
Cc:
Date: Mon, 27 Jul 2009 03:15:24 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
OK. What happens if you put the same vif=['bridge=...'] in OSOL
installation
profile. Are you unable to get IP for install in this case ?
Boris.
--- On Mon, 7/27/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 5:57 AM
Dear Boris,
My CentOS 4.7 32-bit PV guest is getting the dynamic IP
address assignment from the dnsmasq dhcp server I have setup and configured
on Xen Dom 0 OpenSUSE 11.1 32-bit host correctly.
So I think the issue is OpenSolaris specific.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com,
enming.teo@asiasoftsea.net
Date: Mon, 27 Jul 2009 01:57:43 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Please, submit "brctl show"
Boris.
--- On Mon, 7/27/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom
0 in Jeremy's PVOPS Kernel
To: "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 12:58 AM
Dear Boris,
I have changed my opensolaris vm configuration.
Please see
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIVtghCI/AAAAAAAAAGE/ZGkYbBhhx5w/s1600-h/01.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIDWV0RI/AAAAAAAAAF8/aP9riPOEZyk/s1600-h/02.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHzY3WCI/AAAAAAAAAF0/gFxy7zJZXi8/s1600-h/03.jpeg
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHm0RO8I/AAAAAAAAAFs/hIgei-yTbx4/s1600-h/04.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHcUoQ_I/AAAAAAAAAFk/9AiZKPqmG80/s1600-h/05.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/Sm0zdXRfyuI/AAAAAAAAAGM/ZqOaIbmTzB8/s1600-h/06.jpeg
I see my OpenSolaris guest sending DHCPDISCOVER and
my OpenSUSE 11.1 32-bit Dom 0 Xen host sending DHCPOFFER but the OpenSolaris
virtual machine is not setting the offered dynamic IP address to it's
virtual NIC.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Boris Derzhavets"
<bderzhavets@yahoo.com>
To: <xen-devel@lists.xensource.com>,
<enming.teo@asiasoftsea.net>
Date: Mon, 27 Jul 2009 13:01:54 +0800
Subject: Re: [Xen-devel] Unable to Configure
Xen Dom 0 in Jeremy's PVOPS Kernel
View:-
http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run with static
IP:-
pfexec svcadm disable
network/physical:nwam && \
pfexec svcadm enable
network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0 192.168.1.102
netmask 255.255.255.0 mtu 1492
pfexec ifconfig xnf0 up
pfexec route add default 192.168.1.102
which i can/do @ installer time to use
static IP assignements. i just
can't seem to get them to 'stick' or
'be happy' after reboot and xen,
run-time launch.
Use the same commands with the
installed system.
To make the settings permanent you also
need (Jurgen Keil) :
echo 192.168.1.102 netmask
255.255.255.0 mtu 1492 > /etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 >
/etc/defaultrouter
Boris.
--- On Sun, 7/26/09, Mr. Teo En Ming (Zhang Enming) <
enming.teo@asiasoftsea.net > wrote:
From: Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel] Unable to
Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com,
xen-devel@lists.xensource.com
Date: Sunday, July 26, 2009, 5:08
AM
I am using static IP address.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
Does
your OpenSuse 11.1 32-bit has static IP address or it obtain it via DHCP ?
If second option is in place
please submit
# brctl show
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
<enming.teo@asiasoftsea.net> wrote:
From: Mr. Teo En Ming (Zhang
Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable
to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, bderzhavets@yahoo.com ,
xen-devel@lists.xensource.com, Pasi Kr@yahoo.com
Date: Saturday, July 25, 2009,
10:50 PM
At the moment there is only
one network card installed on my lab PC in my company running OpenSUSE 11.1
32-bit with Xen 3.4.1-rc8 Dom 0 kernel 2.6.30-rc6 (jeremy). So when there
are more network cards installed, there will be eth0, eth1, eth2 ethernet
bridges, etc.
Then I can assign the virtual
network card in each virtual machine to a specific ethernet network bridge
(out of many bridges) in Domain 0 using the vif command in guest domain
configuration.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Mr. Teo En Ming (Zhang Enming)
wrote:
Dear Boris,
The ethernet network bridge on
OpenSUSE 11.1 is eth0.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
This means that OSOL installer (by default ) will issue
DHCPDISCOVER via your Xen bridge, looking for DHCP server on your LAN. Only
on RHEL 5.3
(F10 with Xen 3.3.1 src.rpm
been installed along with generated packages) with libvirtd & dnsmasq up
and running you can specify
vif=['bridge=virbr0'
] to detect DHCP Server at your Dom0.
View for instance :-
http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
[http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/]
I don't have any experience
with OpenSuse 11.1 . I hardly remind they tried to reproduce RH's
technology. Most probably they did it in SLES 11 (not sure). Check for
libvirtd&dnsmasq daemons up and running.
But if your OpenSuse 11.1
Dom0 is on "dhcp" bridge itself , then no problems. Just
vif=['bridge=eth0'].
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <
enming.teo@asiasoftsea.net
> wrote:
From: Mr. Teo En Ming
(Zhang Enming) < enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel]
Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com
Cc: "Sander Eikelenboom"
<linux@eikelenboom.it>, Pasi Kr@yahoo.com,
xen-devel@lists.xensource.com
Date: Saturday, July 25,
2009, 12:32 PM
Dear Boris,
This means I have to
install a DHCP server or dnsmasq in my Dom 0, listening on my Dom 0's IP
address, so that it can assign dynamic IP addresses to the DomU.
By the way, are there any
paravirtualized device drivers that I can install in DomU to improve the
performance of the virtual machine?
Thank you.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
>I noticed under the guest domain configuration there is a parameter
called >'extra' kernel parameter. Does the 'nowin' argument stand for no
>graphical windows?
Login as jack/jack to
text console.
Wait until :-
$ pfexec ifconfig -a
will show up your
IPv4 address
$ mkdir .vnc
$ cp .Xclients
.vnc/xstartup
$ vncserver
Connect via vncviewer
IP-DomU:1 from another terminal session to OSOL DomU. In case OSOL installer
will fail to obtain IP via DHCPDISCOVER,
let me know. It might
happen and requires Solaris Kernel Model Debugger
to disable checksum
offloading at boot up. Seems to be hardware dependent issue for OSOL 2009.06
**********************************
Copy ramdisk and
kernel to Dom0
**********************************[root@ServerXen isos]# cat copy.sh
mount -o loop,ro osol-0906-x86.iso /mnt
cp /mnt/boot/amd64/x86.microroot
/home/boris/solaris
cp /mnt/platform/i86xpv/kernel/amd64/unix
/home/boris/solaris***********************
Installation
profile:-
***********************[root@ServerXen solaris]# cat osol200906.install
name = "sol0906"
vcpus = 1
memory = "1024"
kernel = "/home/boris/solaris/unix"
ramdisk = "/home/boris/solaris/x86.microroot"
extra = "/platform/i86xpv/kernel/amd64/unix - nowin -B
install_media=cdrom"
disk =
['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
# Would work as well
# disk =
['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']
vif =
['bridge=eth1']on_shutdown = "destroy"
on_reboot = "destroy"
on_crash = "destroy"Boris
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <
enming.teo@asiasoftsea.net > wrote:
From: Mr. Teo En Ming
(Zhang Enming) < enming.teo@asiasoftsea.net >
Subject: Re:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
enming.teo@asiasoftsea.net
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com,
=?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
Date: Saturday, July
25, 2009, 7:14 AM
Dear All,
I am trying to
install OpenSolaris 2009.06 32-bit paravirtualized guest on OpenSUSE 11.1
32-bit paravirt-ops enabled Xen 3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6.
However, I am
getting an opensolaris console login prompt. There is no GNOME DE for me to
launch the GUI installer for OpenSolaris. I am using the OpenSolaris LiveCD
32-bit.
I noticed under the
guest domain configuration there is a parameter called 'extra' kernel
parameter. Does the 'nowin' argument stand for no graphical windows?
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
[http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg]
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
[http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg]
http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
[http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg]
Then I also get the
"invalid disk device number (768)" error. Do I need to use xvda instead of
hda?
Thank you very
much.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo En Ming wrote:
As a matter of fact, our servers are either Dell PowerEdge
1950/2950 and IBM xSeries.
I am just testing it out on our lab PC first.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online
Pte Ltd
Tampines Central
1 #04-01 Tampines Plaza
Singapore 529541
Republicof Singapore
Mobile
Phone : +65-9648-9798
MSN:
teoenming@hotmail.com
-----Original Message-----
From: "Teo En
Ming" < enming.teo@asiasoftsea.net >
To: "Boris
Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: Sander
Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Sat, 25 Jul
2009 02:27:02 +0800
Subject: Re:
Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Dear Boris,
My next step will be a 64-bit Xen Dom 0 host.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online
Pte Ltd
Tampines
Central 1 #04-01 Tampines Plaza
Singapore
529541
Republicof Singapore
Mobile
Phone: +65-9648-9798
MSN:
teoenming@hotmail.com
-----Original Message-----
From: Boris
Derzhavets <bderzhavets@yahoo.com>
To: Pasi
Kärkkäinen <pasik@iki.fi>, enming.teo@asiasoftsea.net
Cc: Sander
Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24
Jul 2009 10:57:49 -0700 (PDT)
Subject: Re:
Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Teo, it is up to you how to manage, if you
just having fun.
Otherwise,
downloading 64-bit OpenSuse 11.1 ISO image
takes just
12-14 hr even at slow ADSL speed ( like 100 KB/sec).
Install
takes 30 minutes and brings you to the trusted results, instead
of wasting
a lot of time in case of business environment assignment.
Pasi has
32-bit experience due to hardware limitations, which you don't
have.
Boris.
--- On Fri, 7/24/09, Teo En Ming < enming.teo@asiasoftsea.net > wrote:
From: Teo
En Ming < enming.teo@asiasoftsea.net >
Subject:
Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
To: "Boris
Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date:
Friday, July 24, 2009, 12:56 PM
Dear Boris,
My colleague installed OpenSUSE 11.1 32-bit on
the Core 2 Duo machine in our labs. Please see my earlier replies in the
same topic.
I was too lazy to reformat and install 64-bit
OpenSUSE, so I proceeded with Xen Dom 0 pvops kernel compilation on 32-bit
Linux host.
I admit I am getting a lot of headache. Haha.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republicof Singapore
Mobile
Phone: +65-9648-9798
MSN:
teoenming@hotmail.com
-----Original
Message-----
From:
Boris Derzhavets <bderzhavets@yahoo.com>
To:
enming.teo@asiasoftsea.net , Pasi Kärkkäinen <pasik@iki.fi>
Cc:
Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date:
Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Once again, i don't see any reason to to run
32-bit OS on Core2Duo,
unless you like Xen head ache. Core development (PVOPS) is obviously
running in 64-bit environment.
Boris.
---
On Fri, 7/24/09, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To:
enming.teo@asiasoftsea.net , "Pasi Kärkkäinen" <pasik@iki.fi>
Cc:
"Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:47 PM
>After doing the
above, I re-installed back the Xen hypervisor, libraries and tools, and also
>the kernel, initrd, and modules. Then I proceeded to reboot my machine.
After rebooting, > my CentOS 4.7 32-bit PV guest is still able to start
and run!Why it wouldn't ? If your image stays the same.
> I am still very puzzled! What causes the
PV guest initially cannot start? Then what >subsequently causes the PV
guest to suddenly be able to start and run???
That is not supposed to happen. I would suggest clean OS (without any
built in xen presence) install , followed by Xen 3.4.1+pvops kernel
clean install.
Boris.
--- On Fri, 7/24/09, Teo En Ming < enming.teo@asiasoftsea.net > wrote:
From: Teo En Ming < enming.teo@asiasoftsea.net >
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: "Teo En Ming" < enming.teo@asiasoftsea.net >, "Pasi
Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:19 PM
Dear All,
I am very puzzled. In
investigating the cause of the sudden success of the CentOS 4.7 32-bit PV
guest being able to run, I have uninstalled virt-manager and all of its
dependencies:
docbook
python-gtk-vnc
xen-libs 3.3.1
scrollkeeper
xen-tools 3.3.1
libvirt 0.4.6
libvirt-python
vm-install 0.3.24
Then I proceeded to "make
uninstall" in xen-3.4-testing source tree, which also removed my self
compiled Xen Dom 0 pvops enabled kernel, initrd and kernel modules.
After doing the above, I
re-installed back the Xen hypervisor, libraries and tools, and also the
kernel, initrd, and modules. Then I proceeded to reboot my machine. After
rebooting, my CentOS 4.7 32-bit PV guest is still able to start and run!
I am still very puzzled! What
causes the PV guest initially cannot start? Then what subsequently causes
the PV guest to suddenly be able to start and run???
***scratches head***
Anyway my CentOS 4.7 guest
domain is now running. I shall now proceed to virtualize OpenSolaris
2009.06.
Thank you.
Also see screenshots of my
CentOS 4.7 PV guest here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html]
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republicof Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net >
To: "Teo En Ming" < enming.teo@asiasoftsea.net >, "Pasi
Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 22:54:26 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Hi Pasi,
It's very strange. Suddenly my CentOS 4.7
32-bit PV guest is able to start!!! Previously it refuses to start at all.
I think I must have changed something in Dom 0
when I attempted "yast --install virt-manager". This action might have
solved the problem. When I tried to install virt-manager, it also tries to
install xen-libs-3.3.1 and xen-tools-3.3.1 as dependencies. However, I
started off my Xen Dom 0 pvops kernel install with Xen 3.4.1 rc8 branch.
I need to investigate more why suddenly my
CentOS 4.7 32-bit PV guest is able to start.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net >
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 21:54:00 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Hi Pasi,
I realized that Fedora 10
32-bit anaconda installer does not install PAE kernel after mounting the
guest disk image file. I mounted the guest disk image file using losetup and
kpartx which adds device nodes to /dev/mapper. I examined the /boot
directory after mounting the guest disk image file and found no PAE vmlinuz
and initrd.
Still using the mounted
Fedora 10 32-bit guest disk image file, I changed root to the guest disk
filesystems and attempted to install the PAE kernel. Then I modified
menu.lst to boot the PAE kernel. After modifying the grub configuration of
the guest domain, I un-mounted the guest filesystem.
I proceeded to boot the F10
32-bit guest, since I changed to PAE kernel. It is able to boot now (since
the PAE kernel is xen-aware) but then it complains cannot mount /dev/root.
Probably something to do with the PAE initrd file.
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming < enming.teo@asiasoftsea.net >
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 16:31:19 +0300
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
On Fri, Jul 24, 2009 at 08:37:09PM +0800, Teo En
Ming wrote:
> Hi
>
> I attempted to install Fedora 10 32-bit PV guest using
> images/pxeboot/vmlinuz-PAE and
images/pxeboot/initrd-PAE.img from the F10
> media. The non-PAE kernel could not load the installer. I
finished my Fedora
> 10 32-bit PV guest installation but it also cannot boot up
after
> installation, same as the CentOS 4.7 PV guest installation.
>
Fedora 10 installer has a bug, as a default it installs non-PAE
kernel for
xen domU. You need to use a kickstart script (like this) to fix
it:
http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
[http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg]
The important lines being:
-kernel
kernel-PAE
(Fedora 10 and Fedora 11 default kernels are compiled with
pv_ops Xen domU
support enabled, so there's no need for separate kernel-xen with
these distros).
Fedora 11 doesn't have that installer bug, so it installs right
out-of-the-box as Xen domU.
What's the error you get when you start the guest after
installation?
Please paste the "xm log" as text.
I don't have any problems with CentOS 5.3 dom0.
-- Pasi
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
-----Inline
Attachment Follows-----
_______________________________________________
Xen-devel
mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline
Attachment Follows-----
No virus found in
this outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 /
Virus Database: 270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline
Attachment Follows-----
_______________________________________________
Xen-devel mailing
list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline Attachment
Follows-----
No virus found in this
outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 / Virus
Database: 270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline Attachment
Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
No virus found in this outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09
18:01:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline Attachment
Follows-----
No virus found in this outgoing
message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 / Virus
Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
-----Inline Attachment
Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
-----Inline Attachment
Follows-----
No virus found in this outgoing
message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database:
270.13.30/2262 - Release Date: 07/25/09 18:01:00
No virus found in this incoming
message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database:
270.13.24/2255 - Release Date: 07/22/09 18:00:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 125670 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-27 13:15 Boris Derzhavets
2009-07-27 13:46 ` Teo En Ming
0 siblings, 1 reply; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-27 13:15 UTC (permalink / raw)
To: enming.teo, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 93262 bytes --]
1) I need to edit ~/.vnc/xstartup so that it will launch a GUI
interface instead of a text console. During installation, I was able to copy
.Xclients to xstartup but after installation, .Xclients do not exist anymore
under my personal account. I have configured vncserver before in Linux and I
was able to port the GNOME desktop to my remote vnc client.
****************************************************************************
1) It's easy to to grab content of .Xclients just simulating new install and
save content of .Xclients via any editor. Done just now :-
20. Spanish
21. Swedish
To select desktop language, enter a number [default is 6]:
User selected: English
Configuring devices.
Mounting cdroms
Reading ZFS config: done.
opensolaris console login: jack
Password:
Sun Microsystems Inc. SunOS 5.11 snv_111b November 2008
jack@opensolaris:~$ cat .Xclients
#!/bin/ksh
#
# CDDL HEADER START
#
# For automatic login, we just invoke the default Gnome desktop
exec /usr/bin/dtstart jds
jack@opensolaris:~$ Jul 27 06:03:51 opensolaris in.routed[759]: route 0.0.0.0/8 --> 0.0.0.0 nexthop is not directly connected
jack@opensolaris:~$ pfexec ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
xnf0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 2
inet 192.168.1.39 netmask ffffff00 broadcast 192.168.1.255
ether 0:16:3e:60:19:a
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
inet6 ::1/128
xnf0: flags=2004841<UP,RUNNING,MULTICAST,DHCP,IPv6> mtu 1500 index 2
inet6 fe80::216:3eff:fe60:190a/10
ether 0:16:3e:60:19:a
NO PROBLEMS WITH OBTAIN IP VIA DHCPDISCOVER,DHCPACK, ....,DHCPOFFER
****************************************************************************
2) VNC Setup at OSOL DomU as suggested by SUN
cat /etc/X11/gdm/custom.conf
# GDM Custom Configuration file.
# overrides: /usr/share/gdm/defaults.conf
[daemon]
RemoteGreeter=/usr/lib/gdmgreeter
[security]
DisallowTCP=false
# AllowRoot=true
# AllowRemoteRoot=true
[xdmcp]
Enable=true
[gui]
[greeter]
[chooser]
[debug]
[servers]
Services restart:-
svcadm disable xvnc-inetd gdm
svcadm enable xvnc-inetd gdm
***************************************************************
2) I could not hard code IP address (static definition, not dhcp) and
network settings inside OpenSolaris like what I usually do in Linux. It
seems that configuring /etc/hostname.xnf0 did not help. My VM's actual
hostname is "opensolaris", so do I change that to /etc/opensolaris.xnf0?
After OpenSolaris PV guest boots up, I had to manually configure the IP
address, netmask and default route.
***************************************************************************
Switching OSOL DomU to static IP via SMF ( per Jurgen Keil same as per Sun :) ) :-
View http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run with static IP at runtime:-
pfexec svcadm disable network/physical:nwam && \
pfexec svcadm enable network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0 192.168.1.45 netmask 255.255.255.0 mtu 1492
pfexec ifconfig xnf0 up
pfexec route add default 192.168.1.45
To make the settings permanent you also need:
echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 > /etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 > /etc/defaultrouter
******************************************************************************
Boris.
--- On Mon, 7/27/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Teo En Ming" <enming.teo@asiasoftsea.net>, "Boris Derzhavets" <bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 7:25 AM
Dear All,
I am now able to run OpenSolaris 2009.06 32-bit paravirtualized on Xen
3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6 on OpenSUSE 11.1 32-bit.
However, there are still some outstanding configuration issues as I am
not very familiar with Solaris UNIX. I am more of a Linux guy.
1) I need to edit ~/.vnc/xstartup so that it will launch a GUI
interface instead of a text console. During installation, I was able to copy
.Xclients to xstartup but after installation, .Xclients do not exist anymore
under my personal account. I have configured vncserver before in Linux and I
was able to port the GNOME desktop to my remote vnc client.
2) I could not hard code IP address (static definition, not dhcp) and
network settings inside OpenSolaris like what I usually do in Linux. It
seems that configuring /etc/hostname.xnf0 did not help. My VM's actual
hostname is "opensolaris", so do I change that to /etc/opensolaris.xnf0?
After OpenSolaris PV guest boots up, I had to manually configure the IP
address, netmask and default route.
3) Configuring name servers in /etc/resolv.conf inside Solaris did not
work. But I could still go out to the internet by pinging the IP addresses
of Singapore's Starhub and Singnet ISP DNS servers. Just that name
resolution didn't work on Solaris.
Please see the screenshots here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-opensolaris-unix-200906-32-bit.html
More questions:
4) Are there any paravirtualized device drivers/tools I can install
inside PV guests to enhance VM's performance? Like VMware tools?
5) Are there any benchmarking tools to measure I/O throughput of my PV
guests?
Thank you very much.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Cc:
Date: Mon, 27 Jul 2009 18:22:17 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Dear Boris,
I used the same ethernet network bridge in both installation and
actually running of the pv guest. During installation, dhcpdiscover was sent
out by the opensolaris pv guest. Dom 0 also sent out DHCPOFFER. However,
opensolaris pv guest could not configure the virtual network interface using
dhcp. So I had to manually configure the virtual network interface.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com, enming.teo@asiasoftsea.net
Cc:
Date: Mon, 27 Jul 2009 03:15:24 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
OK. What
happens if you put the same vif=['bridge=...'] in OSOL installation
profile. Are you unable to get IP for install in this case ?
Boris.
--- On Mon, 7/27/09, Teo En Ming
<enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 5:57 AM
Dear Boris,
My CentOS 4.7 32-bit PV guest is getting the dynamic IP
address assignment from the dnsmasq dhcp server I have setup and configured
on Xen Dom 0 OpenSUSE 11.1 32-bit host correctly.
So I think the issue is OpenSolaris specific.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com,
enming.teo@asiasoftsea.net
Date: Mon, 27 Jul 2009 01:57:43 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0
in Jeremy's PVOPS Kernel
Please, submit "brctl show"
Boris.
--- On Mon, 7/27/09, Teo En Ming
<enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming
<enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen
Dom 0 in Jeremy's PVOPS Kernel
To: "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 12:58 AM
Dear Boris,
I have changed my opensolaris vm configuration.
Please see
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIVtghCI/AAAAAAAAAGE/ZGkYbBhhx5w/s1600-h/01.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIDWV0RI/AAAAAAAAAF8/aP9riPOEZyk/s1600-h/02.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHzY3WCI/AAAAAAAAAF0/gFxy7zJZXi8/s1600-h/03.jpeg
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHm0RO8I/AAAAAAAAAFs/hIgei-yTbx4/s1600-h/04.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHcUoQ_I/AAAAAAAAAFk/9AiZKPqmG80/s1600-h/05.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/Sm0zdXRfyuI/AAAAAAAAAGM/ZqOaIbmTzB8/s1600-h/06.jpeg
I see my OpenSolaris guest sending DHCPDISCOVER
and my OpenSUSE 11.1 32-bit Dom 0 Xen host sending DHCPOFFER but the
OpenSolaris virtual machine is not setting the offered dynamic IP address to
it's virtual NIC.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Boris Derzhavets"
<bderzhavets@yahoo.com>
To: <xen-devel@lists.xensource.com>,
<enming.teo@asiasoftsea.net>
Date: Mon, 27 Jul 2009 13:01:54 +0800
Subject: Re: [Xen-devel] Unable to Configure
Xen Dom 0 in Jeremy's PVOPS Kernel
View:-
http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run with static
IP:-
pfexec svcadm disable
network/physical:nwam && \
pfexec svcadm enable
network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0 192.168.1.102
netmask 255.255.255.0 mtu 1492
pfexec ifconfig xnf0 up
pfexec route add default
192.168.1.102
which i can/do @ installer time to
use static IP assignements. i just
can't seem to get them to 'stick' or
'be happy' after reboot and xen,
run-time launch.
Use the same commands with the
installed system.
To make the settings permanent you
also need (Jurgen Keil) :
echo 192.168.1.102 netmask
255.255.255.0 mtu 1492 > /etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 >
/etc/defaultrouter
Boris.
--- On Sun, 7/26/09, Mr. Teo En Ming (Zhang Enming) < enming.teo@asiasoftsea.net >
wrote:
From: Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel] Unable to
Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com,
xen-devel@lists.xensource.com
Date: Sunday, July 26, 2009, 5:08
AM
I am using static IP address.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
Does
your OpenSuse 11.1 32-bit has static IP address or it obtain it via DHCP ?
If second option is in place
please submit
# brctl show
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
<enming.teo@asiasoftsea.net> wrote:
From: Mr. Teo En Ming (Zhang
Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable
to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
bderzhavets@yahoo.com ,
xen-devel@lists.xensource.com, Pasi Kr@yahoo.com
Date: Saturday, July 25, 2009,
10:50 PM
At the moment there is only
one network card installed on my lab PC in my company running OpenSUSE 11.1
32-bit with Xen 3.4.1-rc8 Dom 0 kernel 2.6.30-rc6 (jeremy). So when there
are more network cards installed, there will be eth0, eth1, eth2 ethernet
bridges, etc.
Then I can assign the virtual
network card in each virtual machine to a specific ethernet network bridge
(out of many bridges) in Domain 0 using the vif command in guest domain
configuration.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Mr. Teo En Ming (Zhang
Enming) wrote:
Dear Boris,
The ethernet network bridge
on OpenSUSE 11.1 is eth0.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
This means that OSOL installer (by default ) will issue
DHCPDISCOVER via your Xen bridge, looking for DHCP server on your LAN. Only
on RHEL 5.3
(F10 with Xen 3.3.1
src.rpm been installed along with generated packages) with libvirtd &
dnsmasq up and running you can specify
vif=['bridge=virbr0' ] to detect DHCP Server at your Dom0.
View for instance :-
http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
I don't have any
experience with OpenSuse 11.1 . I hardly remind they tried to reproduce RH's
technology. Most probably they did it in SLES 11 (not sure). Check for
libvirtd&dnsmasq daemons up and running.
But if your OpenSuse 11.1
Dom0 is on "dhcp" bridge itself , then no problems. Just
vif=['bridge=eth0'].
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net
> wrote:
From: Mr. Teo En Ming
(Zhang Enming) < enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel]
Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com
Cc: "Sander Eikelenboom"
<linux@eikelenboom.it>, Pasi Kr@yahoo.com,
xen-devel@lists.xensource.com
Date: Saturday, July 25,
2009, 12:32 PM
Dear Boris,
This means I have to
install a DHCP server or dnsmasq in my Dom 0, listening on my Dom 0's IP
address, so that it can assign dynamic IP addresses to the DomU.
By the way, are there
any paravirtualized device drivers that I can install in DomU to improve the
performance of the virtual machine?
Thank you.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
>I noticed under the guest domain configuration there is a parameter
called >'extra' kernel parameter. Does the 'nowin' argument stand for no
>graphical windows?
Login as jack/jack
to text console.
Wait until :-
$ pfexec ifconfig
-a
will show up your
IPv4 address
$ mkdir .vnc
$ cp .Xclients
.vnc/xstartup
$ vncserver
Connect via
vncviewer IP-DomU:1 from another terminal session to OSOL DomU. In case OSOL
installer will fail to obtain IP via DHCPDISCOVER,
let me know. It
might happen and requires Solaris Kernel Model Debugger
to disable checksum
offloading at boot up. Seems to be hardware dependent issue for OSOL 2009.06
**********************************
Copy ramdisk and
kernel to Dom0
**********************************
[root@ServerXen isos]# cat copy.sh
mount -o loop,ro osol-0906-x86.iso /mnt
cp /mnt/boot/amd64/x86.microroot
/home/boris/solaris
cp /mnt/platform/i86xpv/kernel/amd64/unix
/home/boris/solaris
***********************
Installation
profile:-
***********************
[root@ServerXen solaris]# cat osol200906.install
name = "sol0906"
vcpus = 1
memory = "1024"
kernel = "/home/boris/solaris/unix"
ramdisk = "/home/boris/solaris/x86.microroot"
extra = "/platform/i86xpv/kernel/amd64/unix - nowin -B
install_media=cdrom"
disk =
['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
# Would work as well
# disk =
['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']
vif =
['bridge=eth1']
on_shutdown = "destroy"
on_reboot = "destroy"
on_crash = "destroy"
Boris
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net >
wrote:
From: Mr. Teo En
Ming (Zhang Enming) < enming.teo@asiasoftsea.net >
Subject: Re:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
enming.teo@asiasoftsea.net
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com,
=?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
Date: Saturday,
July 25, 2009, 7:14 AM
Dear All,
I am trying to
install OpenSolaris 2009.06 32-bit paravirtualized guest on OpenSUSE 11.1
32-bit paravirt-ops enabled Xen 3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6.
However, I am
getting an opensolaris console login prompt. There is no GNOME DE for me to
launch the GUI installer for OpenSolaris. I am using the OpenSolaris LiveCD
32-bit.
I noticed under
the guest domain configuration there is a parameter called 'extra' kernel
parameter. Does the 'nowin' argument stand for no graphical windows?
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
Then I also get
the "invalid disk device number (768)" error. Do I need to use xvda instead
of hda?
Thank you very
much.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo En Ming
wrote:
As a matter of fact, our servers are either Dell PowerEdge
1950/2950 and IBM xSeries.
I am just testing it out on our lab PC first.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online
Pte Ltd
Tampines
Central 1 #04-01 Tampines Plaza
Singapore
529541
Republic of Singapore
Mobile
Phone : +65-9648-9798
MSN:
teoenming@hotmail.com
-----Original Message-----
From: "Teo En
Ming" < enming.teo@asiasoftsea.net >
To: "Boris
Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: Sander
Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Sat, 25
Jul 2009 02:27:02 +0800
Subject: Re:
Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Dear Boris,
My next step will be a 64-bit Xen Dom 0 host.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft
Online Pte Ltd
Tampines
Central 1 #04-01 Tampines Plaza
Singapore
529541
Republic of Singapore
Mobile
Phone
: +65-9648-9798
MSN:
teoenming@hotmail.com
-----Original Message-----
From: Boris
Derzhavets <bderzhavets@yahoo.com>
To: Pasi
Kärkkäinen <pasik@iki.fi>, enming.teo@asiasoftsea.net
Cc: Sander
Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24
Jul 2009 10:57:49 -0700 (PDT)
Subject: Re:
Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Teo, it is up to you how to manage, if you
just having fun.
Otherwise, downloading 64-bit OpenSuse 11.1 ISO image
takes
just 12-14 hr even at slow ADSL speed ( like 100 KB/sec).
Install
takes 30 minutes and brings you to the trusted results, instead
of
wasting a lot of time in case of business environment assignment.
Pasi has
32-bit experience due to hardware limitations, which you don't
have.
Boris.
--- On
Fri, 7/24/09, Teo En Ming < enming.teo@asiasoftsea.net >
wrote:
From: Teo
En Ming < enming.teo@asiasoftsea.net >
Subject:
Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
To:
"Boris Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc:
"Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date:
Friday, July 24, 2009, 12:56 PM
Dear Boris,
My colleague installed OpenSUSE 11.1 32-bit on
the Core 2 Duo machine in our labs. Please see my earlier replies in the
same topic.
I was too lazy to reformat and install 64-bit
OpenSUSE, so I proceeded with Xen Dom 0 pvops kernel compilation on 32-bit
Linux host.
I admit I am getting a lot of headache. Haha.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone : +65-9648-9798
MSN:
teoenming@hotmail.com
-----Original
Message-----
From:
Boris Derzhavets <bderzhavets@yahoo.com>
To:
enming.teo@asiasoftsea.net , Pasi Kärkkäinen <pasik@iki.fi>
Cc:
Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date:
Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Once again, i don't see any reason to to run
32-bit OS on Core2Duo,
unless you like Xen head ache. Core development (PVOPS) is obviously
running in 64-bit environment.
Boris.
--- On Fri, 7/24/09, Boris Derzhavets
<bderzhavets@yahoo.com>
wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: enming.teo@asiasoftsea.net , "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:47 PM
>After doing the
above, I re-installed back the Xen hypervisor, libraries and tools, and also
>the kernel, initrd, and modules. Then I proceeded to reboot my machine.
After rebooting, > my CentOS 4.7 32-bit PV guest is still able to start
and run!
Why it wouldn't ? If your image stays the same.
> I am still very puzzled!
What causes the PV guest initially cannot start? Then what >subsequently
causes the PV guest to suddenly be able to start and run???
That is not supposed to happen. I would suggest clean OS (without any
built in xen presence) install , followed by Xen 3.4.1+pvops kernel
clean install.
Boris.
--- On Fri, 7/24/09, Teo En Ming
< enming.teo@asiasoftsea.net
> wrote:
From: Teo En Ming < enming.teo@asiasoftsea.net >
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Teo En Ming" < enming.teo@asiasoftsea.net >, "Pasi
Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:19 PM
Dear All,
I am very puzzled. In
investigating the cause of the sudden success of the CentOS 4.7 32-bit PV
guest being able to run, I have uninstalled virt-manager and all of its
dependencies:
docbook
python-gtk-vnc
xen-libs 3.3.1
scrollkeeper
xen-tools 3.3.1
libvirt 0.4.6
libvirt-python
vm-install 0.3.24
Then I proceeded to "make
uninstall" in xen-3.4-testing source tree, which also removed my self
compiled Xen Dom 0 pvops enabled kernel, initrd and kernel modules.
After doing the above, I
re-installed back the Xen hypervisor, libraries and tools, and also the
kernel, initrd, and modules. Then I proceeded to reboot my machine. After
rebooting, my CentOS 4.7 32-bit PV guest is still able to start and run!
I am still very puzzled! What
causes the PV guest initially cannot start? Then what subsequently causes
the PV guest to suddenly be able to start and run???
***scratches head***
Anyway my CentOS 4.7 guest
domain is now running. I shall now proceed to virtualize OpenSolaris
2009.06.
Thank you.
Also see screenshots of my
CentOS 4.7 PV guest here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net >
To: "Teo En Ming" < enming.teo@asiasoftsea.net >, "Pasi
Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 22:54:26 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Hi Pasi,
It's very strange. Suddenly
my CentOS 4.7 32-bit PV guest is able to start!!! Previously it refuses to
start at all.
I think I must have changed
something in Dom 0 when I attempted "yast --install virt-manager". This
action might have solved the problem. When I tried to install virt-manager,
it also tries to install xen-libs-3.3.1 and xen-tools-3.3.1 as dependencies.
However, I started off my Xen Dom 0 pvops kernel install with Xen 3.4.1 rc8
branch.
I need to investigate more
why suddenly my CentOS 4.7 32-bit PV guest is able to start.
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net >
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 21:54:00 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Hi Pasi,
I realized that Fedora 10
32-bit anaconda installer does not install PAE kernel after mounting the
guest disk image file. I mounted the guest disk image file using losetup and
kpartx which adds device nodes to /dev/mapper. I examined the /boot
directory after mounting the guest disk image file and found no PAE vmlinuz
and initrd.
Still using the mounted
Fedora 10 32-bit guest disk image file, I changed root to the guest disk
filesystems and attempted to install the PAE kernel. Then I modified
menu.lst to boot the PAE kernel. After modifying the grub configuration of
the guest domain, I un-mounted the guest filesystem.
I proceeded to boot the F10
32-bit guest, since I changed to PAE kernel. It is able to boot now (since
the PAE kernel is xen-aware) but then it complains cannot mount /dev/root.
Probably something to do with the PAE initrd file.
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming < enming.teo@asiasoftsea.net >
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 16:31:19 +0300
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
On Fri, Jul 24, 2009 at 08:37:09PM +0800, Teo En
Ming wrote:
> Hi
>
> I attempted to install Fedora 10 32-bit PV guest using
> images/pxeboot/vmlinuz-PAE and
images/pxeboot/initrd-PAE.img from the F10
> media. The non-PAE kernel could not load the installer. I
finished my Fedora
> 10 32-bit PV guest installation but it also cannot boot
up after
> installation, same as the CentOS 4.7 PV guest
installation.
>
Fedora 10 installer has a bug, as a default it installs
non-PAE kernel for
xen domU. You need to use a kickstart script (like this) to
fix it:
http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
The important lines being:
-kernel
kernel-PAE
(Fedora 10 and Fedora 11 default kernels are compiled with
pv_ops Xen domU
support enabled, so there's no need for separate kernel-xen
with these distros).
Fedora 11 doesn't have that installer bug, so it installs
right
out-of-the-box as Xen domU.
What's the error you get when you start the guest after
installation?
Please paste the "xm log" as text.
I don't have any problems with CentOS 5.3 dom0.
-- Pasi
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline
Attachment Follows-----
No virus found in
this outgoing message.
Checked by AVG -
www.avg.com
Version: 8.5.392
/ Virus Database: 270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline
Attachment Follows-----
_______________________________________________
Xen-devel mailing
list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment
Follows-----
No virus found in this
outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 /
Virus Database: 270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline Attachment
Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
No virus found in this outgoing message.
Checked by AVG -
www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09
18:01:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment
Follows-----
No virus found in this
outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus
Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
-----Inline Attachment
Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment
Follows-----
No virus found in this outgoing
message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database:
270.13.30/2262 - Release Date: 07/25/09 18:01:00
No virus found in this incoming
message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database:
270.13.24/2255 - Release Date: 07/22/09 18:00:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 130340 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-27 13:15 Boris Derzhavets
@ 2009-07-27 13:46 ` Teo En Ming
2009-07-27 14:06 ` Teo En Ming
0 siblings, 1 reply; 86+ messages in thread
From: Teo En Ming @ 2009-07-27 13:46 UTC (permalink / raw)
To: Boris Derzhavets, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 64167 bytes --]
Dear Boris,
I have to use static IP instead of dhcp because we are going to run servers.
I have managed to enable GNOME GUI and solved the DNS resolver issue based
on the following guides:
http://blogs.sun.com/timthomas/entry/a_simple_vnc_server_and
http://defect.opensolaris.org/bz/show_bug.cgi?id=125
Please see my screenshots here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-opensolaris-unix-200906-32-bit.html
I shall now work on hard coding static IP.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: enming.teo@asiasoftsea.net, xen-devel@lists.xensource.com
Cc:
Date: Mon, 27 Jul 2009 06:15:29 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
1) I need to edit ~/.vnc/xstartup so that it will launch a GUI
interface instead of a text console. During installation, I was able to copy
.Xclients to xstartup but after installation, .Xclients do not exist anymore
under my personal account. I have configured vncserver before in Linux and I
was able to port the GNOME desktop to my remote vnc client.
****************************************************************************
1) It's easy to to grab content of .Xclients just simulating new install and
save content of .Xclients via any editor. Done just now :-
20. Spanish
21. Swedish
To select desktop language, enter a number [default is 6]:
User selected: English
Configuring devices.
Mounting cdroms
Reading ZFS config: done.
opensolaris console login: jack
Password:
Sun Microsystems Inc. SunOS 5.11 snv_111b November 2008
jack@opensolaris:~$ cat .Xclients
#!/bin/ksh
#
# CDDL HEADER
START
#
# For automatic login, we just invoke the default Gnome desktop
exec /usr/bin/dtstart jds
jack@opensolaris:~$ Jul 27 06:03:51 opensolaris in.routed[759]: route
0.0.0.0/8 --> 0.0.0.0 nexthop is not directly connected
jack@opensolaris:~$ pfexec ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
xnf0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index
2
inet 192.168.1.39 netmask ffffff00 broadcast 192.168.1.255
ether 0:16:3e:60:19:a
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252
index 1
inet6 ::1/128
xnf0: flags=2004841<UP,RUNNING,MULTICAST,DHCP,IPv6> mtu 1500 index
2
inet6 fe80::216:3eff:fe60:190a/10
ether 0:16:3e:60:19:a
NO PROBLEMS WITH OBTAIN IP VIA DHCPDISCOVER,DHCPACK, ....,DHCPOFFER
****************************************************************************
2) VNC Setup at OSOL DomU as suggested by SUN
cat /etc/X11/gdm/custom.conf
# GDM Custom Configuration file.
# overrides: /usr/share/gdm/defaults.conf
[daemon]
RemoteGreeter=/usr/lib/gdmgreeter
[security]
DisallowTCP=false
# AllowRoot=true
# AllowRemoteRoot=true
[xdmcp]
Enable=true
[gui]
[greeter]
[chooser]
[debug]
[servers]
Services restart:-
svcadm disable xvnc-inetd gdm
svcadm enable xvnc-inetd gdm
***************************************************************
2) I could not hard code IP address (static definition, not dhcp) and
network settings inside OpenSolaris like what I usually do in Linux. It
seems that configuring /etc/hostname.xnf0 did not help. My VM's actual
hostname is "opensolaris", so do I change that to /etc/opensolaris.xnf0?
After OpenSolaris PV guest boots up, I had to manually configure the IP
address, netmask and default route.
***************************************************************************
Switching OSOL DomU to static IP via SMF ( per Jurgen Keil same as per Sun
:) ) :-
View http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run with static IP at runtime:-
pfexec svcadm disable network/physical:nwam && \
pfexec svcadm enable network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0 192.168.1.45 netmask 255.255.255.0 mtu 1492
pfexec ifconfig xnf0 up
pfexec route add default 192.168.1.45
To make the settings permanent you also need:
echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 > /etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 > /etc/defaultrouter
******************************************************************************
Boris.
--- On
Mon, 7/27/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
To: "Teo En Ming" <enming.teo@asiasoftsea.net>, "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 7:25 AM
Dear All,
I am now able to run OpenSolaris 2009.06 32-bit paravirtualized on Xen
3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6 on OpenSUSE 11.1 32-bit.
However, there are still some outstanding configuration issues as I am
not very familiar with Solaris UNIX. I am more of a Linux guy.
1) I need to edit ~/.vnc/xstartup so that it will launch a GUI
interface instead of a text console. During installation, I was able to copy
.Xclients to xstartup but after installation, .Xclients do not exist anymore
under my personal account. I have configured vncserver before in Linux and I
was able to port the GNOME desktop to my remote vnc client.
2) I could not hard code IP address (static definition, not dhcp) and
network settings inside OpenSolaris like what I usually do in Linux. It
seems that configuring /etc/hostname.xnf0 did not help. My VM's actual
hostname is "opensolaris", so do I change that to /etc/opensolaris.xnf0?
After OpenSolaris PV guest boots up, I had to manually configure the IP
address, netmask and default route.
3) Configuring name servers in /etc/resolv.conf inside Solaris did not
work. But I could still go out to the internet by pinging the IP addresses
of Singapore's Starhub and Singnet ISP DNS servers. Just that name
resolution didn't work on Solaris.
Please see the screenshots here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-opensolaris-unix-200906-32-bit.html
More questions:
4) Are there any paravirtualized device drivers/tools I can install
inside PV guests to enhance VM's performance? Like VMware tools?
5) Are there any benchmarking tools to measure I/O throughput of my PV
guests?
Thank you very much.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Cc:
Date: Mon, 27 Jul 2009 18:22:17 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Dear Boris,
I used the same ethernet network bridge in both installation and
actually running of the pv guest. During installation, dhcpdiscover was sent
out by the opensolaris pv guest. Dom 0 also sent out DHCPOFFER. However,
opensolaris pv guest could not configure the virtual network interface using
dhcp. So I had to manually configure the virtual network interface.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com, enming.teo@asiasoftsea.net
Cc:
Date: Mon, 27 Jul 2009 03:15:24 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
OK. What
happens if you put the same vif=['bridge=...'] in OSOL installation
profile. Are you unable to get IP for install in this case ?
Boris.
--- On Mon, 7/27/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 5:57 AM
Dear Boris,
My CentOS 4.7 32-bit PV guest is getting the dynamic IP
address assignment from the dnsmasq dhcp server I have setup and configured
on Xen Dom 0 OpenSUSE 11.1 32-bit host correctly.
So I think the issue is OpenSolaris specific.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com,
enming.teo@asiasoftsea.net
Date: Mon, 27 Jul 2009 01:57:43 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0
in Jeremy's PVOPS Kernel
Please, submit "brctl show"
Boris.
--- On Mon, 7/27/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming
<enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen
Dom 0 in Jeremy's PVOPS Kernel
To: "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 12:58 AM
Dear Boris,
I have changed my opensolaris vm configuration.
Please see
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIVtghCI/AAAAAAAAAGE/ZGkYbBhhx5w/s1600-h/01.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIDWV0RI/AAAAAAAAAF8/aP9riPOEZyk/s1600-h/02.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHzY3WCI/AAAAAAAAAF0/gFxy7zJZXi8/s1600-h/03.jpeg
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHm0RO8I/AAAAAAAAAFs/hIgei-yTbx4/s1600-h/04.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHcUoQ_I/AAAAAAAAAFk/9AiZKPqmG80/s1600-h/05.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/Sm0zdXRfyuI/AAAAAAAAAGM/ZqOaIbmTzB8/s1600-h/06.jpeg
I see my OpenSolaris guest sending DHCPDISCOVER
and my OpenSUSE 11.1 32-bit Dom 0 Xen host sending DHCPOFFER but the
OpenSolaris virtual machine is not setting the offered dynamic IP address to
it's virtual NIC.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Boris Derzhavets"
<bderzhavets@yahoo.com>
To: <xen-devel@lists.xensource.com>,
<enming.teo@asiasoftsea.net>
Date: Mon, 27 Jul 2009 13:01:54 +0800
Subject: Re: [Xen-devel] Unable to Configure
Xen Dom 0 in Jeremy's PVOPS Kernel
View:-
http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run with static
IP:-
pfexec svcadm disable
network/physical:nwam && \
pfexec svcadm enable
network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0 192.168.1.102
netmask 255.255.255.0 mtu 1492
pfexec ifconfig xnf0 up
pfexec route add default
192.168.1.102
which i can/do @ installer time to
use static IP assignements. i just
can't seem to get them to 'stick' or
'be happy' after reboot and xen,
run-time launch.
Use the same commands with the
installed system.
To make the settings permanent you
also need (Jurgen Keil) :
echo 192.168.1.102 netmask
255.255.255.0 mtu 1492 > /etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 >
/etc/defaultrouter
Boris.
--- On Sun, 7/26/09, Mr. Teo En Ming (Zhang Enming) <
enming.teo@asiasoftsea.net > wrote:
From: Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel] Unable to
Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com,
xen-devel@lists.xensource.com
Date: Sunday, July 26, 2009, 5:08
AM
I am using static IP address.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
Does
your OpenSuse 11.1 32-bit has static IP address or it obtain it via DHCP ?
If second option is in place
please submit
# brctl show
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
<enming.teo@asiasoftsea.net> wrote:
From: Mr. Teo En Ming (Zhang
Enming) <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable
to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>, bderzhavets@yahoo.com ,
xen-devel@lists.xensource.com, Pasi Kr@yahoo.com
Date: Saturday, July 25, 2009,
10:50 PM
At the moment there is only
one network card installed on my lab PC in my company running OpenSUSE 11.1
32-bit with Xen 3.4.1-rc8 Dom 0 kernel 2.6.30-rc6 (jeremy). So when there
are more network cards installed, there will be eth0, eth1, eth2 ethernet
bridges, etc.
Then I can assign the virtual
network card in each virtual machine to a specific ethernet network bridge
(out of many bridges) in Domain 0 using the vif command in guest domain
configuration.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Mr. Teo En Ming (Zhang
Enming) wrote:
Dear Boris,
The ethernet network bridge
on OpenSUSE 11.1 is eth0.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
This means that OSOL installer (by default ) will issue
DHCPDISCOVER via your Xen bridge, looking for DHCP server on your LAN. Only
on RHEL 5.3
(F10 with Xen 3.3.1
src.rpm been installed along with generated packages) with libvirtd &
dnsmasq up and running you can specify
vif=['bridge=virbr0' ] to detect DHCP Server at your Dom0.
View for instance :-
http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
[http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/]
I don't have any
experience with OpenSuse 11.1 . I hardly remind they tried to reproduce RH's
technology. Most probably they did it in SLES 11 (not sure). Check for
libvirtd&dnsmasq daemons up and running.
But if your OpenSuse 11.1
Dom0 is on "dhcp" bridge itself , then no problems. Just
vif=['bridge=eth0'].
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <
enming.teo@asiasoftsea.net
> wrote:
From: Mr. Teo En Ming
(Zhang Enming) < enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel]
Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com
Cc: "Sander Eikelenboom"
<linux@eikelenboom.it>, Pasi Kr@yahoo.com,
xen-devel@lists.xensource.com
Date: Saturday, July 25,
2009, 12:32 PM
Dear Boris,
This means I have to
install a DHCP server or dnsmasq in my Dom 0, listening on my Dom 0's IP
address, so that it can assign dynamic IP addresses to the DomU.
By the way, are there
any paravirtualized device drivers that I can install in DomU to improve the
performance of the virtual machine?
Thank you.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
>I noticed under the guest domain configuration there is a parameter
called >'extra' kernel parameter. Does the 'nowin' argument stand for no
>graphical windows?
Login as jack/jack
to text console.
Wait until :-
$ pfexec ifconfig
-a
will show up your
IPv4 address
$ mkdir .vnc
$ cp .Xclients
.vnc/xstartup
$ vncserver
Connect via
vncviewer IP-DomU:1 from another terminal session to OSOL DomU. In case OSOL
installer will fail to obtain IP via DHCPDISCOVER,
let me know. It
might happen and requires Solaris Kernel Model Debugger
to disable checksum
offloading at boot up. Seems to be hardware dependent issue for OSOL 2009.06
**********************************
Copy ramdisk and
kernel to Dom0
**********************************[root@ServerXen isos]# cat copy.sh
mount -o loop,ro osol-0906-x86.iso /mnt
cp /mnt/boot/amd64/x86.microroot
/home/boris/solaris
cp /mnt/platform/i86xpv/kernel/amd64/unix
/home/boris/solaris***********************
Installation
profile:-
***********************[root@ServerXen solaris]# cat osol200906.install
name = "sol0906"
vcpus = 1
memory = "1024"
kernel = "/home/boris/solaris/unix"
ramdisk = "/home/boris/solaris/x86.microroot"
extra = "/platform/i86xpv/kernel/amd64/unix - nowin -B
install_media=cdrom"
disk =
['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
# Would work as well
# disk =
['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']
vif =
['bridge=eth1']on_shutdown = "destroy"
on_reboot = "destroy"
on_crash = "destroy"Boris
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <
enming.teo@asiasoftsea.net > wrote:
From: Mr. Teo En
Ming (Zhang Enming) < enming.teo@asiasoftsea.net >
Subject: Re:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
enming.teo@asiasoftsea.net
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com,
=?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
Date: Saturday,
July 25, 2009, 7:14 AM
Dear All,
I am trying to
install OpenSolaris 2009.06 32-bit paravirtualized guest on OpenSUSE 11.1
32-bit paravirt-ops enabled Xen 3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6.
However, I am
getting an opensolaris console login prompt. There is no GNOME DE for me to
launch the GUI installer for OpenSolaris. I am using the OpenSolaris LiveCD
32-bit.
I noticed under
the guest domain configuration there is a parameter called 'extra' kernel
parameter. Does the 'nowin' argument stand for no graphical windows?
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
[http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg]
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
[http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg]
http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
[http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg]
Then I also get
the "invalid disk device number (768)" error. Do I need to use xvda instead
of hda?
Thank you very
much.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo En Ming
wrote:
As a matter of fact, our servers are either Dell PowerEdge
1950/2950 and IBM xSeries.
I am just testing it out on our lab PC first.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online
Pte Ltd
Tampines
Central 1 #04-01 Tampines Plaza
Singapore
529541
Republicof Singapore
Mobile
Phone : +65-9648-9798
MSN:
teoenming@hotmail.com
-----Original Message-----
From: "Teo En
Ming" < enming.teo@asiasoftsea.net >
To: "Boris
Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: Sander
Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Sat, 25
Jul 2009 02:27:02 +0800
Subject: Re:
Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Dear Boris,
My next step will be a 64-bit Xen Dom 0 host.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft
Online Pte Ltd
Tampines
Central 1 #04-01 Tampines Plaza
Singapore
529541
Republicof Singapore
Mobile
Phone: +65-9648-9798
MSN:
teoenming@hotmail.com
-----Original Message-----
From: Boris
Derzhavets <bderzhavets@yahoo.com>
To: Pasi
Kärkkäinen <pasik@iki.fi>, enming.teo@asiasoftsea.net
Cc: Sander
Eikelenboom <linux@eikelenboom.it>, xen-devel@lists.xensource.com
Date: Fri, 24
Jul 2009 10:57:49 -0700 (PDT)
Subject: Re:
Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Teo, it is up to you how to manage, if you
just having fun.
Otherwise, downloading 64-bit OpenSuse 11.1 ISO image
takes
just 12-14 hr even at slow ADSL speed ( like 100 KB/sec).
Install
takes 30 minutes and brings you to the trusted results, instead
of
wasting a lot of time in case of business environment assignment.
Pasi has
32-bit experience due to hardware limitations, which you don't
have.
Boris.
--- On Fri, 7/24/09, Teo En Ming < enming.teo@asiasoftsea.net > wrote:
From: Teo
En Ming < enming.teo@asiasoftsea.net >
Subject:
Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
To:
"Boris Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc:
"Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date:
Friday, July 24, 2009, 12:56 PM
Dear Boris,
My colleague installed OpenSUSE 11.1 32-bit on
the Core 2 Duo machine in our labs. Please see my earlier replies in the
same topic.
I was too lazy to reformat and install 64-bit
OpenSUSE, so I proceeded with Xen Dom 0 pvops kernel compilation on 32-bit
Linux host.
I admit I am getting a lot of headache. Haha.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republicof Singapore
Mobile Phone: +65-9648-9798
MSN:
teoenming@hotmail.com
-----Original
Message-----
From:
Boris Derzhavets <bderzhavets@yahoo.com>
To:
enming.teo@asiasoftsea.net , Pasi Kärkkäinen <pasik@iki.fi>
Cc:
Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date:
Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Once again, i don't see any reason to to run
32-bit OS on Core2Duo,
unless you like Xen head ache. Core development (PVOPS) is obviously
running in 64-bit environment.
Boris.
--- On Fri, 7/24/09, Boris Derzhavets
<bderzhavets@yahoo.com> wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: enming.teo@asiasoftsea.net , "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:47 PM
>After doing the
above, I re-installed back the Xen hypervisor, libraries and tools, and also
>the kernel, initrd, and modules. Then I proceeded to reboot my machine.
After rebooting, > my CentOS 4.7 32-bit PV guest is still able to start
and run!Why it wouldn't ? If your image stays the same.
> I am still very puzzled!
What causes the PV guest initially cannot start? Then what >subsequently
causes the PV guest to suddenly be able to start and run???
That is not supposed to happen. I would suggest clean OS (without any
built in xen presence) install , followed by Xen 3.4.1+pvops kernel
clean install.
Boris.
--- On Fri, 7/24/09, Teo En Ming
< enming.teo@asiasoftsea.net
> wrote:
From: Teo En Ming < enming.teo@asiasoftsea.net >
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Teo En Ming" < enming.teo@asiasoftsea.net >, "Pasi
Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:19 PM
Dear All,
I am very puzzled. In
investigating the cause of the sudden success of the CentOS 4.7 32-bit PV
guest being able to run, I have uninstalled virt-manager and all of its
dependencies:
docbook
python-gtk-vnc
xen-libs 3.3.1
scrollkeeper
xen-tools 3.3.1
libvirt 0.4.6
libvirt-python
vm-install 0.3.24
Then I proceeded to "make
uninstall" in xen-3.4-testing source tree, which also removed my self
compiled Xen Dom 0 pvops enabled kernel, initrd and kernel modules.
After doing the above, I
re-installed back the Xen hypervisor, libraries and tools, and also the
kernel, initrd, and modules. Then I proceeded to reboot my machine. After
rebooting, my CentOS 4.7 32-bit PV guest is still able to start and run!
I am still very puzzled! What
causes the PV guest initially cannot start? Then what subsequently causes
the PV guest to suddenly be able to start and run???
***scratches head***
Anyway my CentOS 4.7 guest
domain is now running. I shall now proceed to virtualize OpenSolaris
2009.06.
Thank you.
Also see screenshots of my
CentOS 4.7 PV guest here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html]
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republicof Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net >
To: "Teo En Ming" < enming.teo@asiasoftsea.net >, "Pasi
Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 22:54:26 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Hi Pasi,
It's very strange. Suddenly
my CentOS 4.7 32-bit PV guest is able to start!!! Previously it refuses to
start at all.
I think I must have changed
something in Dom 0 when I attempted "yast --install virt-manager". This
action might have solved the problem. When I tried to install virt-manager,
it also tries to install xen-libs-3.3.1 and xen-tools-3.3.1 as dependencies.
However, I started off my Xen Dom 0 pvops kernel install with Xen 3.4.1 rc8
branch.
I need to investigate more
why suddenly my CentOS 4.7 32-bit PV guest is able to start.
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net >
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 21:54:00 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Hi Pasi,
I realized that Fedora 10
32-bit anaconda installer does not install PAE kernel after mounting the
guest disk image file. I mounted the guest disk image file using losetup and
kpartx which adds device nodes to /dev/mapper. I examined the /boot
directory after mounting the guest disk image file and found no PAE vmlinuz
and initrd.
Still using the mounted
Fedora 10 32-bit guest disk image file, I changed root to the guest disk
filesystems and attempted to install the PAE kernel. Then I modified
menu.lst to boot the PAE kernel. After modifying the grub configuration of
the guest domain, I un-mounted the guest filesystem.
I proceeded to boot the F10
32-bit guest, since I changed to PAE kernel. It is able to boot now (since
the PAE kernel is xen-aware) but then it complains cannot mount /dev/root.
Probably something to do with the PAE initrd file.
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming < enming.teo@asiasoftsea.net >
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 16:31:19 +0300
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
On Fri, Jul 24, 2009 at 08:37:09PM +0800, Teo En
Ming wrote:
> Hi
>
> I attempted to install Fedora 10 32-bit PV guest using
> images/pxeboot/vmlinuz-PAE and
images/pxeboot/initrd-PAE.img from the F10
> media. The non-PAE kernel could not load the installer. I
finished my Fedora
> 10 32-bit PV guest installation but it also cannot boot
up after
> installation, same as the CentOS 4.7 PV guest
installation.
>
Fedora 10 installer has a bug, as a default it installs
non-PAE kernel for
xen domU. You need to use a kickstart script (like this) to
fix it:
http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
[http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg]
The important lines being:
-kernel
kernel-PAE
(Fedora 10 and Fedora 11 default kernels are compiled with
pv_ops Xen domU
support enabled, so there's no need for separate kernel-xen
with these distros).
Fedora 11 doesn't have that installer bug, so it installs
right
out-of-the-box as Xen domU.
What's the error you get when you start the guest after
installation?
Please paste the "xm log" as text.
I don't have any problems with CentOS 5.3 dom0.
-- Pasi
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline
Attachment Follows-----
No virus found in
this outgoing message.
Checked by AVG -
www.avg.com [http://www.avg.com/]
Version: 8.5.392
/ Virus Database: 270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline
Attachment Follows-----
_______________________________________________
Xen-devel mailing
list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline Attachment
Follows-----
No virus found in this
outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 /
Virus Database: 270.13.29/2260 - Release Date: 07/25/09 01:48:00
-----Inline Attachment
Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
No virus found in this outgoing
message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09
18:01:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline Attachment
Follows-----
No virus found in this
outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 / Virus
Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
-----Inline Attachment
Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
-----Inline Attachment
Follows-----
No virus found in this outgoing
message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database:
270.13.30/2262 - Release Date: 07/25/09 18:01:00
No virus found in this incoming
message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database:
270.13.24/2255 - Release Date: 07/22/09 18:00:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=Xen-devel@lists.xensource.com]
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 146453 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-27 13:46 ` Teo En Ming
@ 2009-07-27 14:06 ` Teo En Ming
2009-07-27 15:01 ` Pasi Kärkkäinen
0 siblings, 1 reply; 86+ messages in thread
From: Teo En Ming @ 2009-07-27 14:06 UTC (permalink / raw)
To: Teo En Ming, Boris Derzhavets, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 72448 bytes --]
Dear Boris,
Based on your given information, I have managed to configure static IP
address inside OpenSolaris UNIX PV guest.
These are the two crucial lines:
echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 > /etc/hostname.xnf0
echo 192.168.1.102 > /etc/defaultrouter
Please see screenshot here:
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1600-h/03.jpeg
May I know whether there are any PV device drivers for me to install to
improve PV guests' performance? What are the recommended benchmark tools to
measure I/O performance of PV guests?
Thank you!!!
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Cc:
Date: Mon, 27 Jul 2009 21:46:37 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Dear Boris,
I have to use static IP instead of dhcp because we are going to run
servers.
I have managed to enable GNOME GUI and solved the DNS resolver issue
based on the following guides:
http://blogs.sun.com/timthomas/entry/a_simple_vnc_server_and
http://defect.opensolaris.org/bz/show_bug.cgi?id=125
Please see my screenshots here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-opensolaris-unix-200906-32-bit.html
I shall now work on hard coding static IP.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: enming.teo@asiasoftsea.net, xen-devel@lists.xensource.com
Cc:
Date: Mon, 27 Jul 2009 06:15:29 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
1) I need to edit ~/.vnc/xstartup so that it will launch a GUI
interface instead of a text console. During installation, I was able to copy
.Xclients to xstartup but after installation, .Xclients do not exist anymore
under my personal account. I have configured vncserver before in Linux and I
was able to port the GNOME desktop to my remote vnc client.
****************************************************************************
1) It's easy to to grab content of .Xclients just simulating
new install and
save content of .Xclients via any editor. Done just now
:-
20.
Spanish
21.
Swedish
To select desktop language, enter a number [default is 6]:
User selected: English
Configuring devices.
Mounting cdroms
Reading ZFS config: done.
opensolaris console login: jack
Password:
Sun Microsystems Inc. SunOS
5.11
snv_111b November 2008
jack@opensolaris:~$ cat .Xclients
#!/bin/ksh
#
# CDDL HEADER START
#
# For automatic login, we just invoke the default Gnome
desktop
exec /usr/bin/dtstart jds
jack@opensolaris:~$ Jul 27 06:03:51 opensolaris
in.routed[759]: route 0.0.0.0/8 --> 0.0.0.0 nexthop is not directly
connected
jack@opensolaris:~$ pfexec ifconfig -a
lo0:
flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1
netmask ff000000
xnf0:
flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index
2
inet 192.168.1.39
netmask ffffff00 broadcast 192.168.1.255
ether
0:16:3e:60:19:a
lo0:
flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252
index 1
inet6 ::1/128
xnf0: flags=2004841<UP,RUNNING,MULTICAST,DHCP,IPv6> mtu
1500 index 2
inet6
fe80::216:3eff:fe60:190a/10
ether
0:16:3e:60:19:a
NO PROBLEMS WITH OBTAIN IP VIA DHCPDISCOVER,DHCPACK,
....,DHCPOFFER
****************************************************************************
2) VNC Setup at OSOL DomU as suggested by SUN
cat /etc/X11/gdm/custom.conf
# GDM Custom Configuration file.
# overrides: /usr/share/gdm/defaults.conf
[daemon]
RemoteGreeter=/usr/lib/gdmgreeter
[security]
DisallowTCP=false
# AllowRoot=true
# AllowRemoteRoot=true
[xdmcp]
Enable=true
[gui]
[greeter]
[chooser]
[debug]
[servers]
Services restart:-
svcadm disable xvnc-inetd gdm
svcadm enable xvnc-inetd gdm
***************************************************************
2) I could not hard code IP address (static definition, not dhcp)
and network settings inside OpenSolaris like what I usually do in Linux. It
seems that configuring /etc/hostname.xnf0 did not help. My VM's actual
hostname is "opensolaris", so do I change that to /etc/opensolaris.xnf0?
After OpenSolaris PV guest boots up, I had to manually configure the IP
address, netmask and default route.
***************************************************************************
Switching OSOL DomU to static IP via SMF ( per Jurgen Keil
same as per Sun :) ) :-
View
http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run with static IP at runtime:-
pfexec svcadm disable network/physical:nwam && \
pfexec svcadm enable network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0 192.168.1.45 netmask 255.255.255.0 mtu
1492
pfexec ifconfig xnf0 up
pfexec route add default 192.168.1.45
To make the settings permanent you also need:
echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
/etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 > /etc/defaultrouter
******************************************************************************
Boris.
--- On Mon, 7/27/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Teo En Ming" <enming.teo@asiasoftsea.net>, "Boris
Derzhavets" <bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 7:25 AM
Dear All,
I am now able to run OpenSolaris 2009.06 32-bit
paravirtualized on Xen 3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6 on OpenSUSE 11.1
32-bit.
However, there are still some outstanding configuration
issues as I am not very familiar with Solaris UNIX. I am more of a Linux
guy.
1) I need to edit ~/.vnc/xstartup so that it will launch a
GUI interface instead of a text console. During installation, I was able to
copy .Xclients to xstartup but after installation, .Xclients do not exist
anymore under my personal account. I have configured vncserver before in
Linux and I was able to port the GNOME desktop to my remote vnc client.
2) I could not hard code IP address (static definition, not
dhcp) and network settings inside OpenSolaris like what I usually do in
Linux. It seems that configuring /etc/hostname.xnf0 did not help. My VM's
actual hostname is "opensolaris", so do I change that to
/etc/opensolaris.xnf0? After OpenSolaris PV guest boots up, I had to
manually configure the IP address, netmask and default route.
3) Configuring name servers in /etc/resolv.conf inside
Solaris did not work. But I could still go out to the internet by pinging
the IP addresses of Singapore's Starhub and Singnet ISP DNS servers. Just
that name resolution didn't work on Solaris.
Please see the screenshots here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-opensolaris-unix-200906-32-bit.html
More questions:
4) Are there any paravirtualized device drivers/tools I can
install inside PV guests to enhance VM's performance? Like VMware tools?
5) Are there any benchmarking tools to measure I/O throughput
of my PV guests?
Thank you very much.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Cc:
Date: Mon, 27 Jul 2009 18:22:17 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Dear Boris,
I used the same ethernet network bridge in both
installation and actually running of the pv guest. During installation,
dhcpdiscover was sent out by the opensolaris pv guest. Dom 0 also sent out
DHCPOFFER. However, opensolaris pv guest could not configure the virtual
network interface using dhcp. So I had to manually configure the virtual
network interface.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com,
enming.teo@asiasoftsea.net
Cc:
Date: Mon, 27 Jul 2009 03:15:24 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0
in Jeremy's PVOPS Kernel
OK. What happens if you put the same vif=['bridge=...'] in OSOL
installation
profile. Are you unable to get IP for install in
this case ?
Boris.
--- On Mon, 7/27/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming
<enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen
Dom 0 in Jeremy's PVOPS Kernel
To: "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 5:57 AM
Dear Boris,
My CentOS 4.7 32-bit PV guest is getting the
dynamic IP address assignment from the dnsmasq dhcp server I have setup and
configured on Xen Dom 0 OpenSUSE 11.1 32-bit host correctly.
So I think the issue is OpenSolaris specific.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets
<bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com,
enming.teo@asiasoftsea.net
Date: Mon, 27 Jul 2009 01:57:43 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure
Xen Dom 0 in Jeremy's PVOPS Kernel
Please, submit "brctl show"
Boris.
--- On Mon, 7/27/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming
<enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to
Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 12:58 AM
Dear Boris,
I have changed my opensolaris vm
configuration. Please see
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIVtghCI/AAAAAAAAAGE/ZGkYbBhhx5w/s1600-h/01.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIDWV0RI/AAAAAAAAAF8/aP9riPOEZyk/s1600-h/02.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHzY3WCI/AAAAAAAAAF0/gFxy7zJZXi8/s1600-h/03.jpeg
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHm0RO8I/AAAAAAAAAFs/hIgei-yTbx4/s1600-h/04.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHcUoQ_I/AAAAAAAAAFk/9AiZKPqmG80/s1600-h/05.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/Sm0zdXRfyuI/AAAAAAAAAGM/ZqOaIbmTzB8/s1600-h/06.jpeg
I see my OpenSolaris guest sending
DHCPDISCOVER and my OpenSUSE 11.1 32-bit Dom 0 Xen host sending DHCPOFFER
but the OpenSolaris virtual machine is not setting the offered dynamic IP
address to it's virtual NIC.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines
Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Boris Derzhavets"
<bderzhavets@yahoo.com>
To:
<xen-devel@lists.xensource.com>, <enming.teo@asiasoftsea.net>
Date: Mon, 27 Jul 2009 13:01:54
+0800
Subject: Re: [Xen-devel] Unable to
Configure Xen Dom 0 in Jeremy's PVOPS Kernel
View:-
http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run
with static IP:-
pfexec svcadm disable
network/physical:nwam && \
pfexec svcadm enable
network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0
192.168.1.102 netmask 255.255.255.0 mtu 1492
pfexec ifconfig xnf0 up
pfexec route add default
192.168.1.102
which i can/do @ installer
time to use static IP assignements. i just
can't seem to get them to
'stick' or 'be happy' after reboot and xen,
run-time launch.
Use the same commands with
the installed system.
To make the settings
permanent you also need (Jurgen Keil) :
echo 192.168.1.102 netmask
255.255.255.0 mtu 1492 > /etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 >
/etc/defaultrouter
Boris.
--- On Sun, 7/26/09, Mr. Teo En Ming (Zhang Enming) <
enming.teo@asiasoftsea.net
> wrote:
From: Mr. Teo En Ming
(Zhang Enming) < enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel]
Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: bderzhavets@yahoo.com,
xen-devel@lists.xensource.com
Date: Sunday, July 26,
2009, 5:08 AM
I am using static IP address.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
Does your OpenSuse 11.1 32-bit has static IP address or it obtain
it via DHCP ?
If second option is
in place please submit
# brctl show
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
<enming.teo@asiasoftsea.net> wrote:
From: Mr. Teo En Ming
(Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, bderzhavets@yahoo.com ,
xen-devel@lists.xensource.com, Pasi Kr@yahoo.com
Date: Saturday, July
25, 2009, 10:50 PM
At the moment there is only
one network card installed on my lab PC in my company running OpenSUSE 11.1
32-bit with Xen 3.4.1-rc8 Dom 0 kernel 2.6.30-rc6 (jeremy). So when there
are more network cards installed, there will be eth0, eth1, eth2 ethernet
bridges, etc.
Then I can assign
the virtual network card in each virtual machine to a specific ethernet
network bridge (out of many bridges) in Domain 0 using the vif command in
guest domain configuration.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Mr. Teo En Ming
(Zhang Enming) wrote:
Dear Boris,
The ethernet
network bridge on OpenSUSE 11.1 is eth0.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets
wrote:
This means that OSOL installer (by default ) will issue
DHCPDISCOVER via your Xen bridge, looking for DHCP server on your LAN. Only
on RHEL 5.3
(F10 with Xen
3.3.1 src.rpm been installed along with generated packages) with libvirtd
& dnsmasq up and running you can specify
vif=['bridge=virbr0' ] to detect DHCP Server at your Dom0.
View for
instance :-
http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
[http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/]
I don't have
any experience with OpenSuse 11.1 . I hardly remind they tried to reproduce
RH's technology. Most probably they did it in SLES 11 (not sure). Check for
libvirtd&dnsmasq daemons up and running.
But if your
OpenSuse 11.1 Dom0 is on "dhcp" bridge itself , then no problems. Just
vif=['bridge=eth0'].
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming) <
enming.teo@asiasoftsea.net
> wrote:
From: Mr. Teo
En Ming (Zhang Enming) < enming.teo@asiasoftsea.net >
Subject: Re:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
bderzhavets@yahoo.com
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, Pasi Kr@yahoo.com,
xen-devel@lists.xensource.com
Date: Saturday,
July 25, 2009, 12:32 PM
Dear Boris,
This means I
have to install a DHCP server or dnsmasq in my Dom 0, listening on my Dom
0's IP address, so that it can assign dynamic IP addresses to the DomU.
By the way,
are there any paravirtualized device drivers that I can install in DomU to
improve the performance of the virtual machine?
Thank
you.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris
Derzhavets wrote:
>I noticed under the guest domain
configuration there is a parameter called >'extra' kernel parameter. Does
the 'nowin' argument stand for no >graphical windows?
Login as
jack/jack to text console.
Wait
until :-
$ pfexec
ifconfig -a
will show
up your IPv4 address
$ mkdir
.vnc
$ cp
.Xclients .vnc/xstartup
$
vncserver
Connect
via vncviewer IP-DomU:1 from another terminal session to OSOL DomU. In case
OSOL installer will fail to obtain IP via DHCPDISCOVER,
let me
know. It might happen and requires Solaris Kernel Model Debugger
to
disable checksum offloading at boot up. Seems to be hardware dependent issue
for OSOL 2009.06
**********************************
Copy
ramdisk and kernel to Dom0
**********************************[root@ServerXen isos]# cat copy.sh
mount -o loop,ro osol-0906-x86.iso /mnt
cp /mnt/boot/amd64/x86.microroot
/home/boris/solaris
cp /mnt/platform/i86xpv/kernel/amd64/unix
/home/boris/solaris***********************
Installation profile:-
***********************[root@ServerXen solaris]# cat
osol200906.install
name = "sol0906"
vcpus = 1
memory = "1024"
kernel = "/home/boris/solaris/unix"
ramdisk =
"/home/boris/solaris/x86.microroot"
extra = "/platform/i86xpv/kernel/amd64/unix -
nowin -B install_media=cdrom"
disk =
['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
# Would work as well
# disk =
['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']
vif = ['bridge=eth1']on_shutdown = "destroy"
on_reboot = "destroy"
on_crash = "destroy"
Boris
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang
Enming) <
enming.teo@asiasoftsea.net > wrote:
From: Mr.
Teo En Ming (Zhang Enming) < enming.teo@asiasoftsea.net >
Subject:
Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
enming.teo@asiasoftsea.net
Cc:
"Sander Eikelenboom" <linux@eikelenboom.it>, "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com,
=?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
Date:
Saturday, July 25, 2009, 7:14 AM
Dear All,
I am
trying to install OpenSolaris 2009.06 32-bit paravirtualized guest on
OpenSUSE 11.1 32-bit paravirt-ops enabled Xen 3.4.1-rc8 Dom 0 Kernel
2.6.30-rc6.
However, I am getting an opensolaris console login prompt. There is no GNOME
DE for me to launch the GUI installer for OpenSolaris. I am using the
OpenSolaris LiveCD 32-bit.
I
noticed under the guest domain configuration there is a parameter called
'extra' kernel parameter. Does the 'nowin' argument stand for no graphical
windows?
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
[http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg]
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
[http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg]
http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
[http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg]
Then I
also get the "invalid disk device number (768)" error. Do I need to use xvda
instead of hda?
Thank
you very much.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo En
Ming wrote:
As a matter of fact, our servers are either
Dell PowerEdge 1950/2950 and IBM xSeries.
I am just testing it out on our lab PC first.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic
of Singapore
Mobile Phone : +65-9648-9798
MSN:
teoenming@hotmail.com
-----Original
Message-----
From:
"Teo En Ming" < enming.teo@asiasoftsea.net >
To:
"Boris Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc:
Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date:
Sat, 25 Jul 2009 02:27:02 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Dear Boris,
My next step will be a 64-bit Xen Dom 0 host.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic
of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To:
Pasi Kärkkäinen <pasik@iki.fi>, enming.teo@asiasoftsea.net
Cc:
Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 10:57:49 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Teo, it is up to you how to manage, if you
just having fun.
Otherwise, downloading 64-bit OpenSuse 11.1 ISO image
takes just 12-14 hr even at slow ADSL speed ( like 100 KB/sec).
Install takes 30 minutes and brings you to the trusted results, instead
of wasting a lot of time in case of business environment assignment.
Pasi has 32-bit experience due to hardware limitations, which you don't
have.
Boris.
--- On Fri, 7/24/09, Teo En Ming < enming.teo@asiasoftsea.net > wrote:
From: Teo En Ming < enming.teo@asiasoftsea.net >
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:56 PM
Dear Boris,
My colleague installed OpenSUSE 11.1 32-bit on
the Core 2 Duo machine in our labs. Please see my earlier replies in the
same topic.
I was too lazy to reformat and install 64-bit
OpenSUSE, so I proceeded with Xen Dom 0 pvops kernel compilation on 32-bit
Linux host.
I admit I am getting a lot of headache. Haha.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republicof Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: enming.teo@asiasoftsea.net , Pasi Kärkkäinen
<pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Once again, i don't see any
reason to to run 32-bit OS on Core2Duo,
unless you like Xen head ache. Core development (PVOPS) is obviously
running in 64-bit environment.
Boris.
--- On Fri, 7/24/09, Boris
Derzhavets <bderzhavets@yahoo.com> wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net , "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:47 PM
>After doing the above, I re-installed back the Xen hypervisor, libraries
and tools, and also >the kernel, initrd, and modules. Then I proceeded to
reboot my machine. After rebooting, > my CentOS 4.7 32-bit PV guest is
still able to start and run!Why it wouldn't ? If your image stays the same.
> I am still very puzzled!
What causes the PV guest initially cannot start? Then what >subsequently
causes the PV guest to suddenly be able to start and run???
That is not supposed to happen. I would suggest clean OS
(without any built in xen presence) install , followed by Xen
3.4.1+pvops kernel clean install.
Boris.
--- On Fri, 7/24/09, Teo
En Ming <
enming.teo@asiasoftsea.net > wrote:
From: Teo En Ming < enming.teo@asiasoftsea.net >
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0
in Jeremy's PVOPS Kernel
To: "Teo En Ming" < enming.teo@asiasoftsea.net >, "Pasi
Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:19 PM
Dear All,
I am very puzzled. In
investigating the cause of the sudden success of the CentOS 4.7 32-bit PV
guest being able to run, I have uninstalled virt-manager and all of its
dependencies:
docbook
python-gtk-vnc
xen-libs 3.3.1
scrollkeeper
xen-tools 3.3.1
libvirt 0.4.6
libvirt-python
vm-install 0.3.24
Then I proceeded to "make
uninstall" in xen-3.4-testing source tree, which also removed my self
compiled Xen Dom 0 pvops enabled kernel, initrd and kernel modules.
After doing the above, I
re-installed back the Xen hypervisor, libraries and tools, and also the
kernel, initrd, and modules. Then I proceeded to reboot my machine. After
rebooting, my CentOS 4.7 32-bit PV guest is still able to start and run!
I am still very puzzled! What
causes the PV guest initially cannot start? Then what subsequently causes
the PV guest to suddenly be able to start and run???
***scratches head***
Anyway my CentOS 4.7 guest
domain is now running. I shall now proceed to virtualize OpenSolaris
2009.06.
Thank you.
Also see screenshots of my
CentOS 4.7 PV guest here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html]
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republicof Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net >
To: "Teo En Ming" < enming.teo@asiasoftsea.net >,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 22:54:26 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen
Dom 0 in Jeremy's PVOPS Kernel
Hi Pasi,
It's very strange. Suddenly
my CentOS 4.7 32-bit PV guest is able to start!!! Previously it refuses to
start at all.
I think I must have changed
something in Dom 0 when I attempted "yast --install virt-manager". This
action might have solved the problem. When I tried to install virt-manager,
it also tries to install xen-libs-3.3.1 and xen-tools-3.3.1 as dependencies.
However, I started off my Xen Dom 0 pvops kernel install with Xen 3.4.1 rc8
branch.
I need to investigate more
why suddenly my CentOS 4.7 32-bit PV guest is able to start.
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net >
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 21:54:00 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen
Dom 0 in Jeremy's PVOPS Kernel
Hi Pasi,
I realized that Fedora 10
32-bit anaconda installer does not install PAE kernel after mounting the
guest disk image file. I mounted the guest disk image file using losetup and
kpartx which adds device nodes to /dev/mapper. I examined the /boot
directory after mounting the guest disk image file and found no PAE vmlinuz
and initrd.
Still using the mounted
Fedora 10 32-bit guest disk image file, I changed root to the guest disk
filesystems and attempted to install the PAE kernel. Then I modified
menu.lst to boot the PAE kernel. After modifying the grub configuration of
the guest domain, I un-mounted the guest filesystem.
I proceeded to boot the F10
32-bit guest, since I changed to PAE kernel. It is able to boot now (since
the PAE kernel is xen-aware) but then it complains cannot mount /dev/root.
Probably something to do with the PAE initrd file.
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming < enming.teo@asiasoftsea.net >
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 16:31:19 +0300
Subject: Re: Re[8]: [Xen-devel] Unable to Configure
Xen Dom 0 in Jeremy's PVOPS Kernel
On Fri, Jul 24, 2009 at 08:37:09PM +0800, Teo
En Ming wrote:
> Hi
>
> I attempted to install Fedora 10 32-bit PV
guest using
> images/pxeboot/vmlinuz-PAE and
images/pxeboot/initrd-PAE.img from the F10
> media. The non-PAE kernel could not load the
installer. I finished my Fedora
> 10 32-bit PV guest installation but it also
cannot boot up after
> installation, same as the CentOS 4.7 PV guest
installation.
>
Fedora 10 installer has a bug, as a default it
installs non-PAE kernel for
xen domU. You need to use a kickstart script (like
this) to fix it:
http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
[http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg]
The important lines being:
-kernel
kernel-PAE
(Fedora 10 and Fedora 11 default kernels are
compiled with pv_ops Xen domU
support enabled, so there's no need for separate
kernel-xen with these distros).
Fedora 11 doesn't have that installer bug, so it
installs right
out-of-the-box as Xen domU.
What's the error you get when you start the guest
after installation?
Please paste the "xm log" as text.
I don't have any problems with CentOS 5.3 dom0.
-- Pasi
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
No
virus found in this outgoing message.
Checked
by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date: 07/25/09
01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline
Attachment Follows-----
No virus
found in this outgoing message.
Checked by
AVG - www.avg.com [http://www.avg.com/]
Version:
8.5.392 / Virus Database: 270.13.29/2260 - Release Date: 07/25/09
01:48:00
-----Inline
Attachment Follows-----
_______________________________________________
Xen-devel
mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
No virus found in this
outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09
18:01:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
-----Inline
Attachment Follows-----
No virus found in
this outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.392 /
Virus Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
-----Inline
Attachment Follows-----
_______________________________________________
Xen-devel mailing
list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
-----Inline Attachment
Follows-----
No virus found in this
outgoing message.
Checked by AVG -
www.avg.com
Version: 8.5.392 / Virus
Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
No virus found in this incoming
message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus
Database: 270.13.24/2255 - Release Date: 07/22/09 18:00:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=Xen-devel@lists.xensource.com]
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 151159 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-27 15:01 ` Pasi Kärkkäinen
@ 2009-07-27 14:57 ` Teo En Ming
2009-07-27 15:24 ` Pasi Kärkkäinen
0 siblings, 1 reply; 86+ messages in thread
From: Teo En Ming @ 2009-07-27 14:57 UTC (permalink / raw)
To: Pasi Kärkkäinen; +Cc: Boris Derzhavets, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 2012 bytes --]
Dear Pasi,
Any idea on what benchmark tools I can use to measure I/O performance of my
virtual machines?
Thank you.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming <enming.teo@asiasoftsea.net>
Cc: Boris Derzhavets <bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Mon, 27 Jul 2009 18:01:55 +0300
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
> Dear Boris,
>
> Based on your given information, I have managed to configure static IP
> address inside OpenSolaris UNIX PV guest.
>
> These are the two crucial lines:
>
> echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 > /etc/hostname.xnf0
> echo 192.168.1.102 > /etc/defaultrouter
>
> Please see screenshot here:
>
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1600-h/03.jpeg
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1600-h/03.jpeg]
>
> May I know whether there are any PV device drivers for me to install to
> improve PV guests' performance? What are the recommended benchmark tools
to
> measure I/O performance of PV guests?
>
PV guest doesn't need any additional drivers. Like the name PV says, it's
paravirtual, and uses the optimized drivers/interfaces out-of-the-box.
-- Pasi
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 2933 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-27 14:59 Boris Derzhavets
0 siblings, 0 replies; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-27 14:59 UTC (permalink / raw)
To: enming.teo, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 112755 bytes --]
1. That's not me, that's Jurgen. Thanks him (xen-discuss@opensolaris.org).
I just always watch his threads.
2. Your PV guests performance is determined by block-device backend driver and network-device backend driver compiled built-in Suse's 2.6.27.X xenified kernel running in Dom0. I guess so, because you worked with Suse's dnsmask DHCP Server. Second your question is also addressed to a wrong
person. Personally, i always avoid Novell's products and solutions, except
Andrew Lyon's rebased patch set ;). Yast seems to me like a wisard from MS Windows.
Just go ahead and upgrade yours Xen Host via zypper ( or something like
this). Jan Beulich seems to be a person to respond your questions in open source discussion. Otherwise, purchase SLES 11 and Novell will support
you. I mean all Xen patches will come to your box legally.
Boris.
--- On Mon, 7/27/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Teo En Ming" <enming.teo@asiasoftsea.net>, "Boris Derzhavets" <bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 10:06 AM
Dear Boris,
Based on your given information, I have managed to configure static IP
address inside OpenSolaris UNIX PV guest.
These are the two crucial lines:
echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
/etc/hostname.xnf0
echo 192.168.1.102 > /etc/defaultrouter
Please see screenshot here:
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1600-h/03.jpeg
May I know whether there are any PV device drivers for me to install to
improve PV guests' performance? What are the recommended benchmark tools to
measure I/O performance of PV guests?
Thank you!!!
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Cc:
Date: Mon, 27 Jul 2009 21:46:37 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Dear Boris,
I have to use static IP instead of dhcp because we are going to run
servers.
I have managed to enable GNOME GUI and solved the DNS resolver issue
based on the following guides:
http://blogs.sun.com/timthomas/entry/a_simple_vnc_server_and
http://defect.opensolaris.org/bz/show_bug.cgi?id=125
Please see my screenshots here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-opensolaris-unix-200906-32-bit.html
I shall now work on hard coding static IP.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: enming.teo@asiasoftsea.net, xen-devel@lists.xensource.com
Cc:
Date: Mon, 27 Jul 2009 06:15:29 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
1) I need to edit ~/.vnc/xstartup so that it will launch a GUI
interface instead of a text console. During installation, I was able to copy
.Xclients to xstartup but after installation, .Xclients do not exist anymore
under my personal account. I have configured vncserver before in Linux and I
was able to port the GNOME desktop to my remote vnc client.
****************************************************************************
1) It's easy to to grab content of .Xclients just simulating
new install and
save content of .Xclients via any editor. Done just
now :-
20.
Spanish
21.
Swedish
To select desktop language, enter a number [default is 6]:
User selected: English
Configuring devices.
Mounting cdroms
Reading ZFS config: done.
opensolaris console login: jack
Password:
Sun Microsystems Inc. SunOS
5.11
snv_111b November 2008
jack@opensolaris:~$ cat .Xclients
#!/bin/ksh
#
# CDDL HEADER START
#
# For automatic login, we just invoke the default Gnome
desktop
exec /usr/bin/dtstart jds
jack@opensolaris:~$ Jul 27 06:03:51 opensolaris
in.routed[759]: route 0.0.0.0/8 --> 0.0.0.0 nexthop is not directly
connected
jack@opensolaris:~$ pfexec ifconfig -a
lo0:
flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1
netmask ff000000
xnf0:
flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index
2
inet 192.168.1.39
netmask ffffff00 broadcast 192.168.1.255
ether
0:16:3e:60:19:a
lo0:
flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252
index 1
inet6 ::1/128
xnf0: flags=2004841<UP,RUNNING,MULTICAST,DHCP,IPv6>
mtu 1500 index 2
inet6
fe80::216:3eff:fe60:190a/10
ether
0:16:3e:60:19:a
NO PROBLEMS WITH OBTAIN IP VIA DHCPDISCOVER,DHCPACK,
....,DHCPOFFER
****************************************************************************
2) VNC Setup at OSOL DomU as suggested by SUN
cat /etc/X11/gdm/custom.conf
# GDM Custom Configuration file.
# overrides: /usr/share/gdm/defaults.conf
[daemon]
RemoteGreeter=/usr/lib/gdmgreeter
[security]
DisallowTCP=false
# AllowRoot=true
# AllowRemoteRoot=true
[xdmcp]
Enable=true
[gui]
[greeter]
[chooser]
[debug]
[servers]
Services restart:-
svcadm disable xvnc-inetd gdm
svcadm enable xvnc-inetd gdm
***************************************************************
2) I could not hard code IP address (static definition, not
dhcp) and network settings inside OpenSolaris like what I usually do in
Linux. It seems that configuring /etc/hostname.xnf0 did not help. My VM's
actual hostname is "opensolaris", so do I change that to
/etc/opensolaris.xnf0? After OpenSolaris PV guest boots up, I had to
manually configure the IP address, netmask and default route.
***************************************************************************
Switching OSOL DomU to static IP via SMF ( per Jurgen Keil
same as per Sun :) ) :-
View
http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run with static IP at runtime:-
pfexec svcadm disable network/physical:nwam && \
pfexec svcadm enable network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0 192.168.1.45 netmask 255.255.255.0 mtu
1492
pfexec ifconfig xnf0 up
pfexec route add default 192.168.1.45
To make the settings permanent you also need:
echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
/etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 > /etc/defaultrouter
******************************************************************************
Boris.
--- On Mon, 7/27/09, Teo En Ming
<enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: "Teo En Ming" <enming.teo@asiasoftsea.net>, "Boris
Derzhavets" <bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 7:25 AM
Dear All,
I am now able to run OpenSolaris 2009.06 32-bit
paravirtualized on Xen 3.4.1-rc8 Dom 0 Kernel 2.6.30-rc6 on OpenSUSE 11.1
32-bit.
However, there are still some outstanding configuration
issues as I am not very familiar with Solaris UNIX. I am more of a Linux
guy.
1) I need to edit ~/.vnc/xstartup so that it will launch a
GUI interface instead of a text console. During installation, I was able to
copy .Xclients to xstartup but after installation, .Xclients do not exist
anymore under my personal account. I have configured vncserver before in
Linux and I was able to port the GNOME desktop to my remote vnc client.
2) I could not hard code IP address (static definition, not
dhcp) and network settings inside OpenSolaris like what I usually do in
Linux. It seems that configuring /etc/hostname.xnf0 did not help. My VM's
actual hostname is "opensolaris", so do I change that to
/etc/opensolaris.xnf0? After OpenSolaris PV guest boots up, I had to
manually configure the IP address, netmask and default route.
3) Configuring name servers in /etc/resolv.conf inside
Solaris did not work. But I could still go out to the internet by pinging
the IP addresses of Singapore's Starhub and Singnet ISP DNS servers. Just
that name resolution didn't work on Solaris.
Please see the screenshots here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-opensolaris-unix-200906-32-bit.html
More questions:
4) Are there any paravirtualized device drivers/tools I can
install inside PV guests to enhance VM's performance? Like VMware tools?
5) Are there any benchmarking tools to measure I/O
throughput of my PV guests?
Thank you very much.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" <enming.teo@asiasoftsea.net>
To: "Boris Derzhavets" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Cc:
Date: Mon, 27 Jul 2009 18:22:17 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0
in Jeremy's PVOPS Kernel
Dear Boris,
I used the same ethernet network bridge in both
installation and actually running of the pv guest. During installation,
dhcpdiscover was sent out by the opensolaris pv guest. Dom 0 also sent out
DHCPOFFER. However, opensolaris pv guest could not configure the virtual
network interface using dhcp. So I had to manually configure the virtual
network interface.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com,
enming.teo@asiasoftsea.net
Cc:
Date: Mon, 27 Jul 2009 03:15:24 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to Configure Xen Dom
0 in Jeremy's PVOPS Kernel
OK. What happens if you put the same vif=['bridge=...'] in OSOL
installation
profile. Are you unable to get IP for install in
this case ?
Boris.
--- On Mon, 7/27/09, Teo En Ming
<enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming
<enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen
Dom 0 in Jeremy's PVOPS Kernel
To: "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 5:57 AM
Dear Boris,
My CentOS 4.7 32-bit PV guest is getting the
dynamic IP address assignment from the dnsmasq dhcp server I have setup and
configured on Xen Dom 0 OpenSUSE 11.1 32-bit host correctly.
So I think the issue is OpenSolaris specific.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets
<bderzhavets@yahoo.com>
To: xen-devel@lists.xensource.com,
enming.teo@asiasoftsea.net
Date: Mon, 27 Jul 2009 01:57:43 -0700 (PDT)
Subject: Re: [Xen-devel] Unable to
Configure Xen Dom 0 in Jeremy's PVOPS Kernel
Please, submit "brctl show"
Boris.
--- On Mon, 7/27/09, Teo En Ming
<enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming
<enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to
Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Monday, July 27, 2009, 12:58 AM
Dear Boris,
I have changed my opensolaris vm
configuration. Please see
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIVtghCI/AAAAAAAAAGE/ZGkYbBhhx5w/s1600-h/01.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yIDWV0RI/AAAAAAAAAF8/aP9riPOEZyk/s1600-h/02.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHzY3WCI/AAAAAAAAAF0/gFxy7zJZXi8/s1600-h/03.jpeg
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHm0RO8I/AAAAAAAAAFs/hIgei-yTbx4/s1600-h/04.jpeg
http://1.bp.blogspot.com/_zzjv8MCM2sk/Sm0yHcUoQ_I/AAAAAAAAAFk/9AiZKPqmG80/s1600-h/05.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/Sm0zdXRfyuI/AAAAAAAAAGM/ZqOaIbmTzB8/s1600-h/06.jpeg
I see my OpenSolaris guest sending
DHCPDISCOVER and my OpenSUSE 11.1 32-bit Dom 0 Xen host sending DHCPOFFER
but the OpenSolaris virtual machine is not setting the offered dynamic IP
address to it's virtual NIC.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines
Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Boris Derzhavets"
<bderzhavets@yahoo.com>
To:
<xen-devel@lists.xensource.com>, <enming.teo@asiasoftsea.net>
Date: Mon, 27 Jul 2009 13:01:54
+0800
Subject: Re: [Xen-devel] Unable
to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
View:-
http://www.opensolaris.org/jive/thread.jspa?threadID=104509&tstart=75
To switch OSOL DomU run
with static IP:-
pfexec svcadm disable
network/physical:nwam && \
pfexec svcadm
enable network/physical:default
pfexec ifconfig xnf0 down
pfexec ifconfig xnf0
192.168.1.102 netmask 255.255.255.0 mtu 1492
pfexec ifconfig xnf0 up
pfexec route add default
192.168.1.102
which i can/do @
installer time to use static IP assignements. i just
can't seem to get them to
'stick' or 'be happy' after reboot and xen,
run-time launch.
Use the same commands
with the installed system.
To make the settings
permanent you also need (Jurgen Keil) :
echo 192.168.1.102
netmask 255.255.255.0 mtu 1492 > /etc/hostname.xnf0
rm /etc/dhcp.xnf0
echo 192.168.1.102 >
/etc/defaultrouter
Boris.
--- On Sun, 7/26/09, Mr. Teo En Ming (Zhang Enming)
< enming.teo@asiasoftsea.net
> wrote:
From: Mr. Teo En Ming
(Zhang Enming) < enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel]
Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
bderzhavets@yahoo.com, xen-devel@lists.xensource.com
Date: Sunday, July 26,
2009, 5:08 AM
I am using static IP address.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets wrote:
Does your OpenSuse 11.1 32-bit has static IP address or it obtain
it via DHCP ?
If second option is
in place please submit
# brctl show
Boris.
--- On Sat, 7/25/09, Mr. Teo En Ming (Zhang Enming)
<enming.teo@asiasoftsea.net> wrote:
From: Mr. Teo En
Ming (Zhang Enming) <enming.teo@asiasoftsea.net>
Subject: Re:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, bderzhavets@yahoo.com ,
xen-devel@lists.xensource.com, Pasi Kr@yahoo.com
Date: Saturday,
July 25, 2009, 10:50 PM
At the moment there is only
one network card installed on my lab PC in my company running OpenSUSE 11.1
32-bit with Xen 3.4.1-rc8 Dom 0 kernel 2.6.30-rc6 (jeremy). So when there
are more network cards installed, there will be eth0, eth1, eth2 ethernet
bridges, etc.
Then I can assign
the virtual network card in each virtual machine to a specific ethernet
network bridge (out of many bridges) in Domain 0 using the vif command in
guest domain configuration.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Mr. Teo En Ming
(Zhang Enming) wrote:
Dear Boris,
The ethernet
network bridge on OpenSUSE 11.1 is eth0.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris Derzhavets
wrote:
This means that OSOL installer (by default ) will issue
DHCPDISCOVER via your Xen bridge, looking for DHCP server on your LAN. Only
on RHEL 5.3
(F10 with Xen
3.3.1 src.rpm been installed along with generated packages) with libvirtd
& dnsmasq up and running you can specify
vif=['bridge=virbr0' ] to detect DHCP Server at your Dom0.
View for
instance :-
http://bderzhavets.wordpress.com/2009/05/07/backport-zfs-support-to-xen-331-f10-dom0-kernel-2630-rc3-tip/
I don't have
any experience with OpenSuse 11.1 . I hardly remind they tried to reproduce
RH's technology. Most probably they did it in SLES 11 (not sure). Check for
libvirtd&dnsmasq daemons up and running.
But if your
OpenSuse 11.1 Dom0 is on "dhcp" bridge itself , then no problems. Just
vif=['bridge=eth0'].
Boris.
--- On
Sat, 7/25/09, Mr. Teo En Ming (Zhang
Enming) <
enming.teo@asiasoftsea.net > wrote:
From: Mr. Teo
En Ming (Zhang Enming) < enming.teo@asiasoftsea.net >
Subject: Re:
[Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To:
bderzhavets@yahoo.com
Cc: "Sander
Eikelenboom" <linux@eikelenboom.it>, Pasi Kr@yahoo.com,
xen-devel@lists.xensource.com
Date:
Saturday, July 25, 2009, 12:32 PM
Dear Boris,
This means
I have to install a DHCP server or dnsmasq in my Dom 0, listening on my Dom
0's IP address, so that it can assign dynamic IP addresses to the DomU.
By the way,
are there any paravirtualized device drivers that I can install in DomU to
improve the performance of the virtual machine?
Thank
you.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Boris
Derzhavets wrote:
>I noticed under the guest domain
configuration there is a parameter called >'extra' kernel parameter. Does
the 'nowin' argument stand for no >graphical windows?
Login
as jack/jack to text console.
Wait
until :-
$
pfexec ifconfig -a
will
show up your IPv4 address
$ mkdir
.vnc
$ cp
.Xclients .vnc/xstartup
$
vncserver
Connect
via vncviewer IP-DomU:1 from another terminal session to OSOL DomU. In case
OSOL installer will fail to obtain IP via DHCPDISCOVER,
let me
know. It might happen and requires Solaris Kernel Model Debugger
to
disable checksum offloading at boot up. Seems to be hardware dependent issue
for OSOL 2009.06
**********************************
Copy
ramdisk and kernel to Dom0
**********************************
[root@ServerXen isos]# cat copy.sh
mount -o loop,ro osol-0906-x86.iso /mnt
cp /mnt/boot/amd64/x86.microroot
/home/boris/solaris
cp /mnt/platform/i86xpv/kernel/amd64/unix
/home/boris/solaris
***********************
Installation profile:-
***********************
[root@ServerXen solaris]# cat
osol200906.install
name = "sol0906"
vcpus = 1
memory = "1024"
kernel = "/home/boris/solaris/unix"
ramdisk =
"/home/boris/solaris/x86.microroot"
extra = "/platform/i86xpv/kernel/amd64/unix -
nowin -B install_media=cdrom"
disk =
['phy:/dev/loop0,xvdc:cdrom,r','phy:/dev/sdb5,xvda,w']
# Would work as well
# disk =
['phy:/dev/loop0,6:cdrom,r','phy:/dev/sdb5,0,w']
vif = ['bridge=eth1']
on_shutdown = "destroy"
on_reboot = "destroy"
on_crash = "destroy"
Boris
--- On
Sat, 7/25/09, Mr. Teo En Ming (Zhang
Enming) <
enming.teo@asiasoftsea.net > wrote:
From:
Mr. Teo En Ming (Zhang Enming) < enming.teo@asiasoftsea.net >
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
To:
enming.teo@asiasoftsea.net
Cc:
"Sander Eikelenboom" <linux@eikelenboom.it>, "Boris Derzhavets"
<bderzhavets@yahoo.com>, xen-devel@lists.xensource.com,
=?ISO-8859-1?Q?Pasi_K=E4r?=@yahoo.com
Date:
Saturday, July 25, 2009, 7:14 AM
Dear All,
I am
trying to install OpenSolaris 2009.06 32-bit paravirtualized guest on
OpenSUSE 11.1 32-bit paravirt-ops enabled Xen 3.4.1-rc8 Dom 0 Kernel
2.6.30-rc6.
However, I am getting an opensolaris console login prompt. There is no GNOME
DE for me to launch the GUI installer for OpenSolaris. I am using the
OpenSolaris LiveCD 32-bit.
I
noticed under the guest domain configuration there is a parameter called
'extra' kernel parameter. Does the 'nowin' argument stand for no graphical
windows?
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT4kZta-I/AAAAAAAAAE0/xxUGuNunPoY/s1600-h/01.jpeg
http://4.bp.blogspot.com/_zzjv8MCM2sk/SmoT5YG2sNI/AAAAAAAAAFM/H0ntFt6LCx4/s1600-h/04.jpeg
http://2.bp.blogspot.com/_zzjv8MCM2sk/SmoT5uzjF6I/AAAAAAAAAFU/2Y3KNWPUwWk/s1600-h/05.jpeg
Then
I also get the "invalid disk device number (768)" error. Do I need to use
xvda instead of hda?
Thank
you very much.
--
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01
Tampines Plaza
Singapore
529541
Republic of
Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
Teo
En Ming wrote:
As a matter of fact, our servers are either
Dell PowerEdge 1950/2950 and IBM xSeries.
I am just testing it out on our lab PC first.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic
of Singapore
Mobile Phone : +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net >
To:
"Boris Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc:
Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Sat, 25 Jul 2009 02:27:02 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Dear Boris,
My next step will be a 64-bit Xen Dom 0 host.
Mr. Teo En Ming (Zhang Enming)
Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic
of Singapore
Mobile Phone : +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: Pasi Kärkkäinen <pasik@iki.fi>, enming.teo@asiasoftsea.net
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 10:57:49 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Teo, it is up to you how to manage, if you
just having fun.
Otherwise, downloading 64-bit OpenSuse 11.1 ISO image
takes just 12-14 hr even at slow ADSL speed ( like 100 KB/sec).
Install takes 30 minutes and brings you to the trusted results, instead
of wasting a lot of time in case of business environment assignment.
Pasi has 32-bit experience due to hardware limitations, which you don't
have.
Boris.
--- On Fri, 7/24/09, Teo En Ming
< enming.teo@asiasoftsea.net >
wrote:
From: Teo En Ming < enming.teo@asiasoftsea.net >
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>, "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:56 PM
Dear Boris,
My colleague installed
OpenSUSE 11.1 32-bit on the Core 2 Duo machine in our labs. Please see my
earlier replies in the same topic.
I was too lazy to reformat
and install 64-bit OpenSUSE, so I proceeded with Xen Dom 0 pvops kernel
compilation on 32-bit Linux host.
I admit I am getting a lot
of headache. Haha.
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone : +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: enming.teo@asiasoftsea.net , Pasi Kärkkäinen
<pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 09:57:18 -0700 (PDT)
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
Once again, i don't see any
reason to to run 32-bit OS on Core2Duo,
unless you like Xen head ache. Core development (PVOPS) is
obviously
running in 64-bit environment.
Boris.
--- On Fri, 7/24/09, Boris
Derzhavets
<bderzhavets@yahoo.com> wrote:
From: Boris Derzhavets <bderzhavets@yahoo.com>
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS Kernel
To: enming.teo@asiasoftsea.net , "Pasi Kärkkäinen"
<pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:47 PM
>After doing the above, I re-installed back the Xen hypervisor, libraries
and tools, and also >the kernel, initrd, and modules. Then I proceeded to
reboot my machine. After rebooting, > my CentOS 4.7 32-bit PV guest is
still able to start and run!
Why it wouldn't ? If your image stays the same.
> I am still very puzzled!
What causes the PV guest initially cannot start? Then what >subsequently
causes the PV guest to suddenly be able to start and run???
That is not supposed to happen. I would suggest clean OS
(without any built in xen presence) install , followed by Xen
3.4.1+pvops kernel clean install.
Boris.
--- On Fri, 7/24/09, Teo
En Ming <
enming.teo@asiasoftsea.net > wrote:
From: Teo En Ming < enming.teo@asiasoftsea.net >
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen Dom
0 in Jeremy's PVOPS Kernel
To: "Teo En Ming" < enming.teo@asiasoftsea.net >,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "Sander Eikelenboom" <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Friday, July 24, 2009, 12:19 PM
Dear All,
I am very puzzled. In
investigating the cause of the sudden success of the CentOS 4.7 32-bit PV
guest being able to run, I have uninstalled virt-manager and all of its
dependencies:
docbook
python-gtk-vnc
xen-libs 3.3.1
scrollkeeper
xen-tools 3.3.1
libvirt 0.4.6
libvirt-python
vm-install 0.3.24
Then I proceeded to "make
uninstall" in xen-3.4-testing source tree, which also removed my self
compiled Xen Dom 0 pvops enabled kernel, initrd and kernel modules.
After doing the above, I
re-installed back the Xen hypervisor, libraries and tools, and also the
kernel, initrd, and modules. Then I proceeded to reboot my machine. After
rebooting, my CentOS 4.7 32-bit PV guest is still able to start and run!
I am still very puzzled! What
causes the PV guest initially cannot start? Then what subsequently causes
the PV guest to suddenly be able to start and run???
***scratches head***
Anyway my CentOS 4.7 guest
domain is now running. I shall now proceed to virtualize OpenSolaris
2009.06.
Thank you.
Also see screenshots of my
CentOS 4.7 PV guest here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/creating-centos-47-32-bit.html
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net >
To: "Teo En Ming" < enming.teo@asiasoftsea.net >,
"Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 22:54:26 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure Xen
Dom 0 in Jeremy's PVOPS Kernel
Hi Pasi,
It's very strange. Suddenly
my CentOS 4.7 32-bit PV guest is able to start!!! Previously it refuses to
start at all.
I think I must have changed
something in Dom 0 when I attempted "yast --install virt-manager". This
action might have solved the problem. When I tried to install virt-manager,
it also tries to install xen-libs-3.3.1 and xen-tools-3.3.1 as dependencies.
However, I started off my Xen Dom 0 pvops kernel install with Xen 3.4.1 rc8
branch.
I need to investigate more
why suddenly my CentOS 4.7 32-bit PV guest is able to start.
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming" < enming.teo@asiasoftsea.net
>
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 21:54:00 +0800
Subject: Re: Re[8]: [Xen-devel] Unable to Configure
Xen Dom 0 in Jeremy's PVOPS Kernel
Hi Pasi,
I realized that Fedora 10
32-bit anaconda installer does not install PAE kernel after mounting the
guest disk image file. I mounted the guest disk image file using losetup and
kpartx which adds device nodes to /dev/mapper. I examined the /boot
directory after mounting the guest disk image file and found no PAE vmlinuz
and initrd.
Still using the mounted
Fedora 10 32-bit guest disk image file, I changed root to the guest disk
filesystems and attempted to install the PAE kernel. Then I modified
menu.lst to boot the PAE kernel. After modifying the grub configuration of
the guest domain, I un-mounted the guest filesystem.
I proceeded to boot the F10
32-bit guest, since I changed to PAE kernel. It is able to boot now (since
the PAE kernel is xen-aware) but then it complains cannot mount /dev/root.
Probably something to do with the PAE initrd file.
Mr. Teo En Ming (Zhang
Enming) Dip(Mechatronics Engineering) BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology
Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming < enming.teo@asiasoftsea.net >
Cc: Sander Eikelenboom <linux@eikelenboom.it>,
xen-devel@lists.xensource.com
Date: Fri, 24 Jul 2009 16:31:19 +0300
Subject: Re: Re[8]: [Xen-devel] Unable to Configure
Xen Dom 0 in Jeremy's PVOPS Kernel
On Fri, Jul 24, 2009 at 08:37:09PM +0800, Teo
En Ming wrote:
> Hi
>
> I attempted to install Fedora 10 32-bit PV
guest using
> images/pxeboot/vmlinuz-PAE and
images/pxeboot/initrd-PAE.img from the F10
> media. The non-PAE kernel could not load the
installer. I finished my Fedora
> 10 32-bit PV guest installation but it also
cannot boot up after
> installation, same as the CentOS 4.7 PV guest
installation.
>
Fedora 10 installer has a bug, as a default it
installs non-PAE kernel for
xen domU. You need to use a kickstart script (like
this) to fix it:
http://pasik.reaktio.net/fedora/f10-xen-domu-ks.cfg
The important lines being:
-kernel
kernel-PAE
(Fedora 10 and Fedora 11 default kernels are
compiled with pv_ops Xen domU
support enabled, so there's no need for separate
kernel-xen with these distros).
Fedora 11 doesn't have that installer bug, so it
installs right
out-of-the-box as Xen domU.
What's the error you get when you start the guest
after installation?
Please paste the "xm log" as text.
I don't have any problems with CentOS 5.3 dom0.
-- Pasi
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
No
virus found in this outgoing message.
Checked by AVG -
www.avg.com
Version: 8.5.392 / Virus Database: 270.13.29/2260 - Release Date: 07/25/09
01:48:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline
Attachment Follows-----
No virus
found in this outgoing message.
Checked by
AVG -
www.avg.com
Version:
8.5.392 / Virus Database: 270.13.29/2260 - Release Date: 07/25/09
01:48:00
-----Inline
Attachment Follows-----
_______________________________________________
Xen-devel
mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
No virus found in this outgoing message.
Checked by AVG -
www.avg.com
Version: 8.5.392 / Virus Database: 270.13.30/2262 - Release Date: 07/25/09
18:01:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline
Attachment Follows-----
No virus found in
this outgoing message.
Checked by AVG -
www.avg.com
Version: 8.5.392
/ Virus Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
-----Inline
Attachment Follows-----
_______________________________________________
Xen-devel mailing
list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment
Follows-----
No virus found in this
outgoing message.
Checked by AVG -
www.avg.com
Version: 8.5.392 /
Virus Database: 270.13.30/2262 - Release Date: 07/25/09 18:01:00
No virus found in this incoming
message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus
Database: 270.13.24/2255 - Release Date: 07/22/09 18:00:00
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 151261 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-27 14:06 ` Teo En Ming
@ 2009-07-27 15:01 ` Pasi Kärkkäinen
2009-07-27 14:57 ` Teo En Ming
0 siblings, 1 reply; 86+ messages in thread
From: Pasi Kärkkäinen @ 2009-07-27 15:01 UTC (permalink / raw)
To: Teo En Ming; +Cc: Boris Derzhavets, xen-devel
On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
> Dear Boris,
>
> Based on your given information, I have managed to configure static IP
> address inside OpenSolaris UNIX PV guest.
>
> These are the two crucial lines:
>
> echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 > /etc/hostname.xnf0
> echo 192.168.1.102 > /etc/defaultrouter
>
> Please see screenshot here:
>
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1600-h/03.jpeg
>
> May I know whether there are any PV device drivers for me to install to
> improve PV guests' performance? What are the recommended benchmark tools to
> measure I/O performance of PV guests?
>
PV guest doesn't need any additional drivers. Like the name PV says, it's
paravirtual, and uses the optimized drivers/interfaces out-of-the-box.
-- Pasi
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-27 14:57 ` Teo En Ming
@ 2009-07-27 15:24 ` Pasi Kärkkäinen
2009-07-28 5:13 ` Teo En Ming (Zhang Enming)
2009-07-28 11:13 ` Teo En Ming (Zhang Enming)
0 siblings, 2 replies; 86+ messages in thread
From: Pasi Kärkkäinen @ 2009-07-27 15:24 UTC (permalink / raw)
To: Teo En Ming; +Cc: Boris Derzhavets, xen-devel
On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
> Dear Pasi,
>
> Any idea on what benchmark tools I can use to measure I/O performance of my
> virtual machines?
>
Well for simple streaming IO tests you can use dd, it supports multiple
block sizes, O_DIRECT etc.
If you need multithreaded/multiprocess tests, or filesystem IO tests, then
you need something more sophisticated.. bonnie++, ltp disktest, fio, iozone
etc. Google is your friend.
-- Pasi
> Thank you.
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> -----Original Message-----
>
> From: Pasi Kärkkäinen <pasik@iki.fi>
>
> To: Teo En Ming <enming.teo@asiasoftsea.net>
>
> Cc: Boris Derzhavets <bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
>
> Date: Mon, 27 Jul 2009 18:01:55 +0300
>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
>
>
>
> On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
>
> > Dear Boris,
>
> >
>
> > Based on your given information, I have managed to configure static IP
>
> > address inside OpenSolaris UNIX PV guest.
>
> >
>
> > These are the two crucial lines:
>
> >
>
> > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 > /etc/hostname.xnf0
>
> > echo 192.168.1.102 > /etc/defaultrouter
>
> >
>
> > Please see screenshot here:
>
> >
>
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1600-h/03.jpeg
> [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1600-h/03.jpeg]
>
> >
>
> > May I know whether there are any PV device drivers for me to install to
>
> > improve PV guests' performance? What are the recommended benchmark tools
> to
>
> > measure I/O performance of PV guests?
>
> >
>
>
>
> PV guest doesn't need any additional drivers. Like the name PV says, it's
>
> paravirtual, and uses the optimized drivers/interfaces out-of-the-box.
>
>
>
> -- Pasi
>
>
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
^ permalink raw reply [flat|nested] 86+ messages in thread
* RE: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-27 15:24 ` Pasi Kärkkäinen
@ 2009-07-28 5:13 ` Teo En Ming (Zhang Enming)
2009-07-28 11:13 ` Teo En Ming (Zhang Enming)
1 sibling, 0 replies; 86+ messages in thread
From: Teo En Ming (Zhang Enming) @ 2009-07-28 5:13 UTC (permalink / raw)
To: pasik; +Cc: 'Boris Derzhavets', xen-devel
Dear All,
I have managed to virtualize Windows 7 32-bit as a HVM guest on Xen 3.4.1
RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host operating
system.
Please see screenshots here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
rtual-machine-on-xen.html
I have uploaded 24 pictures so far at the time of this writing.
Regards,
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: xen-devel-bounces@lists.xensource.com
[mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi Kärkkäinen
Sent: Monday, July 27, 2009 11:24 PM
To: Teo En Ming
Cc: Boris Derzhavets; xen-devel@lists.xensource.com
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
> Dear Pasi,
>
> Any idea on what benchmark tools I can use to measure I/O performance of
my
> virtual machines?
>
Well for simple streaming IO tests you can use dd, it supports multiple
block sizes, O_DIRECT etc.
If you need multithreaded/multiprocess tests, or filesystem IO tests, then
you need something more sophisticated.. bonnie++, ltp disktest, fio, iozone
etc. Google is your friend.
-- Pasi
> Thank you.
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> -----Original Message-----
>
> From: Pasi Kärkkäinen <pasik@iki.fi>
>
> To: Teo En Ming <enming.teo@asiasoftsea.net>
>
> Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
>
> Date: Mon, 27 Jul 2009 18:01:55 +0300
>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
>
>
>
> On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
>
> > Dear Boris,
>
> >
>
> > Based on your given information, I have managed to configure static IP
>
> > address inside OpenSolaris UNIX PV guest.
>
> >
>
> > These are the two crucial lines:
>
> >
>
> > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 > /etc/hostname.xnf0
>
> > echo 192.168.1.102 > /etc/defaultrouter
>
> >
>
> > Please see screenshot here:
>
> >
>
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
600-h/03.jpeg
>
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
1600-h/03.jpeg]
>
> >
>
> > May I know whether there are any PV device drivers for me to install to
>
> > improve PV guests' performance? What are the recommended benchmark tools
> to
>
> > measure I/O performance of PV guests?
>
> >
>
>
>
> PV guest doesn't need any additional drivers. Like the name PV says, it's
>
> paravirtual, and uses the optimized drivers/interfaces out-of-the-box.
>
>
>
> -- Pasi
>
>
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date: 07/26/09
17:59:00
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
17:59:00
^ permalink raw reply [flat|nested] 86+ messages in thread
* RE: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-28 11:13 ` Teo En Ming (Zhang Enming)
@ 2009-07-28 11:07 ` Teo En Ming
0 siblings, 0 replies; 86+ messages in thread
From: Teo En Ming @ 2009-07-28 11:07 UTC (permalink / raw)
To: Teo En Ming (Zhang Enming), pasik; +Cc: 'Boris Derzhavets', xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 6760 bytes --]
Hi,
I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0 Kernel 2.6.30
RC6 on OpenSUSE 11.1 Linux 32-bit Host.
Please see screenshots here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-virtual-machine-on.html
Can I change the emulated display adapter driver in Windows XP HVM guest
under Xen to a better one so that I can play games?
Thank you!!!
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>
To: <pasik@iki.fi>
Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Date: Tue, 28 Jul 2009 19:13:34 +0800
Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Dear All,
I have managed to virtualize Windows 7 32-bit as a HVM guest on Xen 3.4.1
RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host operating
system.
Please see screenshots here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi]
rtual-machine-on-xen.html
I have uploaded 24 pictures so far at the time of this writing.
Regards,
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: xen-devel-bounces@lists.xensource.com
[mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi
Kärkkäinen
Sent: Monday, July 27, 2009 11:24 PM
To: Teo En Ming
Cc: Boris Derzhavets; xen-devel@lists.xensource.com
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
> Dear Pasi,
>
> Any idea on what benchmark tools I can use to measure I/O performance of
my
> virtual machines?
>
Well for simple streaming IO tests you can use dd, it supports multiple
block sizes, O_DIRECT etc.
If you need multithreaded/multiprocess tests, or filesystem IO tests, then
you need something more sophisticated.. bonnie++, ltp disktest, fio, iozone
etc. Google is your friend.
-- Pasi
> Thank you.
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> -----Original Message-----
>
> From: Pasi Kärkkäinen <pasik@iki.fi>
>
> To: Teo En Ming <enming.teo@asiasoftsea.net>
>
> Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
>
> Date: Mon, 27 Jul 2009 18:01:55 +0300
>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
>
>
>
> On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
>
> > Dear Boris,
>
> >
>
> > Based on your given information, I have managed to configure static IP
>
> > address inside OpenSolaris UNIX PV guest.
>
> >
>
> > These are the two crucial lines:
>
> >
>
> > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 > /etc/hostname.xnf0
>
> > echo 192.168.1.102 > /etc/defaultrouter
>
> >
>
> > Please see screenshot here:
>
> >
>
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1]
600-h/03.jpeg
>
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
1600-h/03.jpeg]
>
> >
>
> > May I know whether there are any PV device drivers for me to install to
>
> > improve PV guests' performance? What are the recommended benchmark tools
> to
>
> > measure I/O performance of PV guests?
>
> >
>
>
>
> PV guest doesn't need any additional drivers. Like the name PV says, it's
>
> paravirtual, and uses the optimized drivers/interfaces out-of-the-box.
>
>
>
> -- Pasi
>
>
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
[http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
No virus found in this incoming message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date: 07/26/09
17:59:00
No virus found in this outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
17:59:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
No virus found in this incoming message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
17:59:00
No virus found in this outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
17:59:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 9894 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* RE: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-27 15:24 ` Pasi Kärkkäinen
2009-07-28 5:13 ` Teo En Ming (Zhang Enming)
@ 2009-07-28 11:13 ` Teo En Ming (Zhang Enming)
2009-07-28 11:07 ` Teo En Ming
1 sibling, 1 reply; 86+ messages in thread
From: Teo En Ming (Zhang Enming) @ 2009-07-28 11:13 UTC (permalink / raw)
To: pasik; +Cc: 'Boris Derzhavets', xen-devel
Dear All,
I have managed to virtualize Windows 7 32-bit as a HVM guest on Xen 3.4.1
RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host operating
system.
Please see screenshots here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
rtual-machine-on-xen.html
I have uploaded 24 pictures so far at the time of this writing.
Regards,
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: xen-devel-bounces@lists.xensource.com
[mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi Kärkkäinen
Sent: Monday, July 27, 2009 11:24 PM
To: Teo En Ming
Cc: Boris Derzhavets; xen-devel@lists.xensource.com
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
> Dear Pasi,
>
> Any idea on what benchmark tools I can use to measure I/O performance of
my
> virtual machines?
>
Well for simple streaming IO tests you can use dd, it supports multiple
block sizes, O_DIRECT etc.
If you need multithreaded/multiprocess tests, or filesystem IO tests, then
you need something more sophisticated.. bonnie++, ltp disktest, fio, iozone
etc. Google is your friend.
-- Pasi
> Thank you.
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> -----Original Message-----
>
> From: Pasi Kärkkäinen <pasik@iki.fi>
>
> To: Teo En Ming <enming.teo@asiasoftsea.net>
>
> Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
>
> Date: Mon, 27 Jul 2009 18:01:55 +0300
>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
>
>
>
> On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
>
> > Dear Boris,
>
> >
>
> > Based on your given information, I have managed to configure static IP
>
> > address inside OpenSolaris UNIX PV guest.
>
> >
>
> > These are the two crucial lines:
>
> >
>
> > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 > /etc/hostname.xnf0
>
> > echo 192.168.1.102 > /etc/defaultrouter
>
> >
>
> > Please see screenshot here:
>
> >
>
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
600-h/03.jpeg
>
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
1600-h/03.jpeg]
>
> >
>
> > May I know whether there are any PV device drivers for me to install to
>
> > improve PV guests' performance? What are the recommended benchmark tools
> to
>
> > measure I/O performance of PV guests?
>
> >
>
>
>
> PV guest doesn't need any additional drivers. Like the name PV says, it's
>
> paravirtual, and uses the optimized drivers/interfaces out-of-the-box.
>
>
>
> -- Pasi
>
>
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date: 07/26/09
17:59:00
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
17:59:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
17:59:00
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
17:59:00
^ permalink raw reply [flat|nested] 86+ messages in thread
* RE: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-28 11:19 Boris Derzhavets
2009-07-28 11:25 ` Teo En Ming
0 siblings, 1 reply; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-28 11:19 UTC (permalink / raw)
To: enming.teo, pasik; +Cc: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 7722 bytes --]
It's really exciting ;)
Boris.
--- On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>, pasik@iki.fi
Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Tuesday, July 28, 2009, 7:07 AM
Hi,
I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0 Kernel
2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
Please see screenshots here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-virtual-machine-on.html
Can I change the emulated display adapter driver in Windows XP HVM
guest under Xen to a better one so that I can play games?
Thank you!!!
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming (Zhang Enming)"
<enming.teo@asiasoftsea.net>
To: <pasik@iki.fi>
Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Date: Tue, 28 Jul 2009 19:13:34 +0800
Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Dear All,
I have managed to virtualize Windows 7 32-bit as a HVM guest on
Xen 3.4.1
RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
operating
system.
Please see screenshots here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
rtual-machine-on-xen.html
I have uploaded 24 pictures so far at the time of this writing.
Regards,
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: xen-devel-bounces@lists.xensource.com
[mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi
Kärkkäinen
Sent: Monday, July 27, 2009 11:24 PM
To: Teo En Ming
Cc: Boris Derzhavets; xen-devel@lists.xensource.com
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS
Kernel
On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
> Dear Pasi,
>
> Any idea on what benchmark tools I can use to measure I/O
performance of
my
> virtual machines?
>
Well for simple streaming IO tests you can use dd, it supports
multiple
block sizes, O_DIRECT etc.
If you need multithreaded/multiprocess tests, or filesystem IO
tests, then
you need something more sophisticated.. bonnie++, ltp disktest,
fio, iozone
etc. Google is your friend.
-- Pasi
> Thank you.
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> -----Original Message-----
>
> From: Pasi Kärkkäinen <pasik@iki.fi>
>
> To: Teo En Ming <enming.teo@asiasoftsea.net>
>
> Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
>
> Date: Mon, 27 Jul 2009 18:01:55 +0300
>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS
> Kernel
>
>
>
>
> On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
>
> > Dear Boris,
>
> >
>
> > Based on your given information, I have managed to
configure static IP
>
> > address inside OpenSolaris UNIX PV guest.
>
> >
>
> > These are the two crucial lines:
>
> >
>
> > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
/etc/hostname.xnf0
>
> > echo 192.168.1.102 > /etc/defaultrouter
>
> >
>
> > Please see screenshot here:
>
> >
>
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
600-h/03.jpeg
>
[
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
1600-h/03.jpeg]
>
> >
>
> > May I know whether there are any PV device drivers for
me to install to
>
> > improve PV guests' performance? What are the
recommended benchmark tools
> to
>
> > measure I/O performance of PV guests?
>
> >
>
>
>
> PV guest doesn't need any additional drivers. Like the name
PV says, it's
>
> paravirtual, and uses the optimized drivers/interfaces
out-of-the-box.
>
>
>
> -- Pasi
>
>
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel
[
http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
No virus found in this incoming message.
Checked by AVG -
www.avg.com
Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date:
07/26/09
17:59:00
No virus found in this outgoing message.
Checked by AVG -
www.avg.com
Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
07/27/09
17:59:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
No virus found in this incoming message.
Checked by AVG -
www.avg.com
Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
07/27/09
17:59:00
No virus found in this outgoing message.
Checked by AVG -
www.avg.com
Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
07/27/09
17:59:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 10381 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* RE: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-28 11:19 Boris Derzhavets
@ 2009-07-28 11:25 ` Teo En Ming
2009-07-28 11:59 ` Pasi Kärkkäinen
2009-07-28 12:32 ` Pasi Kärkkäinen
0 siblings, 2 replies; 86+ messages in thread
From: Teo En Ming @ 2009-07-28 11:25 UTC (permalink / raw)
To: Boris Derzhavets, pasik; +Cc: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 8969 bytes --]
Dear Boris,
Any way I can change the emulated display driver in Windows HVM guest to a
better one for game playing?
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Boris Derzhavets <bderzhavets@yahoo.com>
To: enming.teo@asiasoftsea.net, pasik@iki.fi
Cc: xen-devel@lists.xensource.com
Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
It's really exciting ;)
Boris.
--- On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>, pasik@iki.fi
Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Date: Tuesday, July 28, 2009, 7:07 AM
Hi,
I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0 Kernel
2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
Please see screenshots here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-virtual-machine-on.html
Can I change the emulated display adapter driver in Windows XP HVM
guest under Xen to a better one so that I can play games?
Thank you!!!
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: "Teo En Ming (Zhang Enming)"
<enming.teo@asiasoftsea.net>
To: <pasik@iki.fi>
Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Date: Tue, 28 Jul 2009 19:13:34 +0800
Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
Dear All,
I have managed to virtualize Windows 7 32-bit as a HVM guest on
Xen 3.4.1
RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
operating
system.
Please see screenshots here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi]
rtual-machine-on-xen.html
I have uploaded 24 pictures so far at the time of this writing.
Regards,
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: xen-devel-bounces@lists.xensource.com
[mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi
Kärkkäinen
Sent: Monday, July 27, 2009 11:24 PM
To: Teo En Ming
Cc: Boris Derzhavets; xen-devel@lists.xensource.com
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS
Kernel
On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
> Dear Pasi,
>
> Any idea on what benchmark tools I can use to measure I/O
performance of
my
> virtual machines?
>
Well for simple streaming IO tests you can use dd, it supports
multiple
block sizes, O_DIRECT etc.
If you need multithreaded/multiprocess tests, or filesystem IO
tests, then
you need something more sophisticated.. bonnie++, ltp disktest,
fio, iozone
etc. Google is your friend.
-- Pasi
> Thank you.
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> -----Original Message-----
>
> From: Pasi Kärkkäinen <pasik@iki.fi>
>
> To: Teo En Ming <enming.teo@asiasoftsea.net>
>
> Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
>
> Date: Mon, 27 Jul 2009 18:01:55 +0300
>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS
> Kernel
>
>
>
>
> On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
>
> > Dear Boris,
>
> >
>
> > Based on your given information, I have managed to
configure static IP
>
> > address inside OpenSolaris UNIX PV guest.
>
> >
>
> > These are the two crucial lines:
>
> >
>
> > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
/etc/hostname.xnf0
>
> > echo 192.168.1.102 > /etc/defaultrouter
>
> >
>
> > Please see screenshot here:
>
> >
>
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1]
600-h/03.jpeg
>
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
1600-h/03.jpeg]
>
> >
>
> > May I know whether there are any PV device drivers for
me to install to
>
> > improve PV guests' performance? What are the
recommended benchmark tools
> to
>
> > measure I/O performance of PV guests?
>
> >
>
>
>
> PV guest doesn't need any additional drivers. Like the name
PV says, it's
>
> paravirtual, and uses the optimized drivers/interfaces
out-of-the-box.
>
>
>
> -- Pasi
>
>
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
[http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
No virus found in this incoming message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date:
07/26/09
17:59:00
No virus found in this outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
07/27/09
17:59:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
No virus found in this incoming message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
07/27/09
17:59:00
No virus found in this outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
07/27/09
17:59:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 14945 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-28 11:25 ` Teo En Ming
@ 2009-07-28 11:59 ` Pasi Kärkkäinen
2009-07-28 12:32 ` Pasi Kärkkäinen
1 sibling, 0 replies; 86+ messages in thread
From: Pasi Kärkkäinen @ 2009-07-28 11:59 UTC (permalink / raw)
To: Teo En Ming; +Cc: Boris Derzhavets, xen-devel
On Tue, Jul 28, 2009 at 07:25:58PM +0800, Teo En Ming wrote:
> Dear Boris,
>
> Any way I can change the emulated display driver in Windows HVM guest to a
> better one for game playing?
>
You can't really do that. Qemu (used in Xen HVM domains) only provides basic
2D display adapter, so it's not really suitable for gaming.
If you want to experiment with unstable/development code, you could try VT-d
to passthrough a graphics adapter (the whole device) to HVM guest.
I think there are also some graphics drivers that operate through the
network, ie. communicate with dom0 graphics hardware, but I don't have any
links to those.
Xen is mostly a server virtualization software/solution nowadays..
-- Pasi
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> -----Original Message-----
>
> From: Boris Derzhavets <bderzhavets@yahoo.com>
>
> To: enming.teo@asiasoftsea.net, pasik@iki.fi
>
> Cc: xen-devel@lists.xensource.com
>
> Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
>
> Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
>
>
>
> It's really exciting ;)
>
> Boris.
>
> --- On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
>
> From: Teo En Ming <enming.teo@asiasoftsea.net>
> Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
> To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>, pasik@iki.fi
> Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> xen-devel@lists.xensource.com
> Date: Tuesday, July 28, 2009, 7:07 AM
>
>
> Hi,
>
>
>
> I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0 Kernel
> 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
>
>
>
> Please see screenshots here:
>
>
>
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-virtual-machine-on.html
>
>
>
> Can I change the emulated display adapter driver in Windows XP HVM
> guest under Xen to a better one so that I can play games?
>
>
>
> Thank you!!!
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
>
> -----Original
> Message-----
>
> From: "Teo En Ming (Zhang Enming)"
> <enming.teo@asiasoftsea.net>
>
> To: <pasik@iki.fi>
>
> Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> xen-devel@lists.xensource.com
>
> Date: Tue, 28 Jul 2009 19:13:34 +0800
>
> Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> PVOPS Kernel
>
>
>
>
>
> Dear All,
>
>
>
> I have managed to virtualize Windows 7 32-bit as a HVM guest on
> Xen 3.4.1
>
> RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> operating
>
> system.
>
>
>
> Please see screenshots here:
>
>
>
>
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
> [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi]
>
>
> rtual-machine-on-xen.html
>
>
>
> I have uploaded 24 pictures so far at the time of this writing.
>
>
>
> Regards,
>
>
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
>
> -----Original Message-----
>
> From: xen-devel-bounces@lists.xensource.com
>
> [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi
> Kärkkäinen
>
> Sent: Monday, July 27, 2009 11:24 PM
>
> To: Teo En Ming
>
> Cc: Boris Derzhavets; xen-devel@lists.xensource.com
>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> Jeremy's PVOPS
>
> Kernel
>
>
>
> On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
>
> > Dear Pasi,
>
> >
>
> > Any idea on what benchmark tools I can use to measure I/O
> performance of
>
> my
>
> > virtual machines?
>
> >
>
>
>
> Well for simple streaming IO tests you can use dd, it supports
> multiple
>
> block sizes, O_DIRECT etc.
>
>
>
> If you need multithreaded/multiprocess tests, or filesystem IO
> tests, then
>
> you need something more sophisticated.. bonnie++, ltp disktest,
> fio, iozone
>
> etc. Google is your friend.
>
>
>
> -- Pasi
>
>
>
> > Thank you.
>
> >
>
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>
> > BEng(Hons)(Mechanical Engineering)
>
> >
>
> > Technical Support Engineer
>
> >
>
> > Information Technology Department
>
> >
>
> > Asiasoft Online Pte Ltd
>
> >
>
> > Tampines Central 1 #04-01 Tampines Plaza
>
> >
>
> > Singapore 529541
>
> >
>
> > Republic of Singapore
>
> >
>
> > Mobile Phone: +65-9648-9798
>
> >
>
> > MSN: teoenming@hotmail.com
>
> >
>
> >
>
> > -----Original Message-----
>
> >
>
> > From: Pasi Kärkkäinen <pasik@iki.fi>
>
> >
>
> > To: Teo En Ming <enming.teo@asiasoftsea.net>
>
> >
>
> > Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
>
> xen-devel@lists.xensource.com
>
> >
>
> > Date: Mon, 27 Jul 2009 18:01:55 +0300
>
> >
>
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> Jeremy's PVOPS
>
> > Kernel
>
> >
>
> >
>
> >
>
> >
>
> > On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
>
> >
>
> > > Dear Boris,
>
> >
>
> > >
>
> >
>
> > > Based on your given information, I have managed to
> configure static IP
>
> >
>
> > > address inside OpenSolaris UNIX PV guest.
>
> >
>
> > >
>
> >
>
> > > These are the two crucial lines:
>
> >
>
> > >
>
> >
>
> > > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
> /etc/hostname.xnf0
>
> >
>
> > > echo 192.168.1.102 > /etc/defaultrouter
>
> >
>
> > >
>
> >
>
> > > Please see screenshot here:
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
>
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
> [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1]
>
>
> 600-h/03.jpeg
>
> >
>
>
> [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
>
>
> 1600-h/03.jpeg]
>
> >
>
> > >
>
> >
>
> > > May I know whether there are any PV device drivers for
> me to install to
>
> >
>
> > > improve PV guests' performance? What are the
> recommended benchmark tools
>
>
>
> > to
>
> >
>
> > > measure I/O performance of PV guests?
>
> >
>
> > >
>
> >
>
> >
>
> >
>
> > PV guest doesn't need any additional drivers. Like the name
> PV says, it's
>
> >
>
> > paravirtual, and uses the optimized drivers/interfaces
> out-of-the-box.
>
> >
>
> >
>
> >
>
> > -- Pasi
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > _______________________________________________
>
> >
>
> > Xen-devel mailing list
>
> >
>
> > Xen-devel@lists.xensource.com
>
> >
>
> > http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]
>
> [http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]]
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
>
>
>
> No virus found in this incoming message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/]
>
> Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date:
> 07/26/09
>
> 17:59:00
>
>
>
> No virus found in this outgoing message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/]
>
> Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> 07/27/09
>
> 17:59:00
>
>
>
>
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
>
>
>
> No virus found in this incoming message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/]
>
> Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> 07/27/09
>
> 17:59:00
>
>
>
> No virus found in this outgoing message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/]
>
> Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> 07/27/09
>
> 17:59:00
>
>
>
>
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-28 12:32 ` Pasi Kärkkäinen
@ 2009-07-28 12:27 ` Teo En Ming
2009-07-28 12:48 ` Pasi Kärkkäinen
0 siblings, 1 reply; 86+ messages in thread
From: Teo En Ming @ 2009-07-28 12:27 UTC (permalink / raw)
To: Pasi Kärkkäinen; +Cc: 'Boris Derzhavets', xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 14849 bytes --]
Dear Pasi,
I thought only paravirtualized guests allow PCI devices to be passed through
from the Dom 0 host? Fully virtualized guests like Windows are not able to
access PCI devices directly in Dom 0.
Does Core 2 Duo support Intel VT-d? Or only in Xeons?
I am using Xen 3.4.1 testing code right now. Does it support PCI device pass
through?
Thank you.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: "'Teo En Ming'" <enming.teo@asiasoftsea.net>
Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Date: Tue, 28 Jul 2009 20:32:10 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Tue, Jul 28, 2009 at 07:25:58PM +0800, Teo En Ming wrote:
> Dear Boris,
>
> Any way I can change the emulated display driver in Windows HVM guest to a
> better one for game playing?
>
You can't really do that. Qemu (used in Xen HVM domains) only provides basic
2D display adapter, so it's not really suitable for gaming.
If you want to experiment with unstable/development code, you could try VT-d
to passthrough a graphics adapter (the whole device) to HVM guest.
I think there are also some graphics drivers that operate through the
network, ie. communicate with dom0 graphics hardware, but I don't have any
links to those.
Xen is mostly a server virtualization software/solution nowadays..
-- Pasi
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> -----Original Message-----
>
> From: Boris Derzhavets <bderzhavets@yahoo.com>
>
> To: enming.teo@asiasoftsea.net, pasik@iki.fi
>
> Cc: xen-devel@lists.xensource.com
>
> Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
>
> Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
>
>
>
> It's really exciting ;)
>
> Boris.
>
> --- On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
>
> From: Teo En Ming <enming.teo@asiasoftsea.net>
> Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
> To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>,
pasik@iki.fi
> Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> xen-devel@lists.xensource.com
> Date: Tuesday, July 28, 2009, 7:07 AM
>
>
> Hi,
>
>
>
> I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0 Kernel
> 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
>
>
>
> Please see screenshots here:
>
>
>
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v]
irtual-machine-on.html
>
>
>
> Can I change the emulated display adapter driver in Windows XP HVM
> guest under Xen to a better one so that I can play games?
>
>
>
> Thank you!!!
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
>
> -----Original
> Message-----
>
> From: "Teo En Ming (Zhang Enming)"
> <enming.teo@asiasoftsea.net>
>
> To: <pasik@iki.fi>
>
> Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> xen-devel@lists.xensource.com
>
> Date: Tue, 28 Jul 2009 19:13:34 +0800
>
> Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> PVOPS Kernel
>
>
>
>
>
> Dear All,
>
>
>
> I have managed to virtualize Windows 7 32-bit as a HVM guest on
> Xen 3.4.1
>
> RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> operating
>
> system.
>
>
>
> Please see screenshots here:
>
>
>
>
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi]
>
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v]
i]
>
>
> rtual-machine-on-xen.html
>
>
>
> I have uploaded 24 pictures so far at the time of this writing.
>
>
>
> Regards,
>
>
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
>
> -----Original Message-----
>
> From: xen-devel-bounces@lists.xensource.com
>
> [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi
> Kärkkäinen
>
> Sent: Monday, July 27, 2009 11:24 PM
>
> To: Teo En Ming
>
> Cc: Boris Derzhavets; xen-devel@lists.xensource.com
>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> Jeremy's PVOPS
>
> Kernel
>
>
>
> On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
>
> > Dear Pasi,
>
> >
>
> > Any idea on what benchmark tools I can use to measure I/O
> performance of
>
> my
>
> > virtual machines?
>
> >
>
>
>
> Well for simple streaming IO tests you can use dd, it supports
> multiple
>
> block sizes, O_DIRECT etc.
>
>
>
> If you need multithreaded/multiprocess tests, or filesystem IO
> tests, then
>
> you need something more sophisticated.. bonnie++, ltp disktest,
> fio, iozone
>
> etc. Google is your friend.
>
>
>
> -- Pasi
>
>
>
> > Thank you.
>
> >
>
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>
> > BEng(Hons)(Mechanical Engineering)
>
> >
>
> > Technical Support Engineer
>
> >
>
> > Information Technology Department
>
> >
>
> > Asiasoft Online Pte Ltd
>
> >
>
> > Tampines Central 1 #04-01 Tampines Plaza
>
> >
>
> > Singapore 529541
>
> >
>
> > Republic of Singapore
>
> >
>
> > Mobile Phone: +65-9648-9798
>
> >
>
> > MSN: teoenming@hotmail.com
>
> >
>
> >
>
> > -----Original Message-----
>
> >
>
> > From: Pasi Kärkkäinen <pasik@iki.fi>
>
> >
>
> > To: Teo En Ming <enming.teo@asiasoftsea.net>
>
> >
>
> > Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
>
> xen-devel@lists.xensource.com
>
> >
>
> > Date: Mon, 27 Jul 2009 18:01:55 +0300
>
> >
>
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> Jeremy's PVOPS
>
> > Kernel
>
> >
>
> >
>
> >
>
> >
>
> > On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
>
> >
>
> > > Dear Boris,
>
> >
>
> > >
>
> >
>
> > > Based on your given information, I have managed to
> configure static IP
>
> >
>
> > > address inside OpenSolaris UNIX PV guest.
>
> >
>
> > >
>
> >
>
> > > These are the two crucial lines:
>
> >
>
> > >
>
> >
>
> > > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
> /etc/hostname.xnf0
>
> >
>
> > > echo 192.168.1.102 > /etc/defaultrouter
>
> >
>
> > >
>
> >
>
> > > Please see screenshot here:
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
>
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1]
>
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
1]
>
>
> 600-h/03.jpeg
>
> >
>
>
>
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
>
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
]
>
>
> 1600-h/03.jpeg]
>
> >
>
> > >
>
> >
>
> > > May I know whether there are any PV device drivers for
> me to install to
>
> >
>
> > > improve PV guests' performance? What are the
> recommended benchmark tools
>
>
>
> > to
>
> >
>
> > > measure I/O performance of PV guests?
>
> >
>
> > >
>
> >
>
> >
>
> >
>
> > PV guest doesn't need any additional drivers. Like the name
> PV says, it's
>
> >
>
> > paravirtual, and uses the optimized drivers/interfaces
> out-of-the-box.
>
> >
>
> >
>
> >
>
> > -- Pasi
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > _______________________________________________
>
> >
>
> > Xen-devel mailing list
>
> >
>
> > Xen-devel@lists.xensource.com
>
> >
>
> > http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
>
> [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]]
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
[http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
>
>
>
> No virus found in this incoming message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
[http://www.avg.com/]]
>
> Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date:
> 07/26/09
>
> 17:59:00
>
>
>
> No virus found in this outgoing message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
[http://www.avg.com/]]
>
> Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> 07/27/09
>
> 17:59:00
>
>
>
>
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
[http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
>
>
>
> No virus found in this incoming message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
[http://www.avg.com/]]
>
> Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> 07/27/09
>
> 17:59:00
>
>
>
> No virus found in this outgoing message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
[http://www.avg.com/]]
>
> Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> 07/27/09
>
> 17:59:00
>
>
>
>
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
[http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
No virus found in this incoming message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
17:59:00
No virus found in this outgoing message.
Checked by AVG - www.avg.com [http://www.avg.com/]
Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
17:59:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 26538 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-28 11:25 ` Teo En Ming
2009-07-28 11:59 ` Pasi Kärkkäinen
@ 2009-07-28 12:32 ` Pasi Kärkkäinen
2009-07-28 12:27 ` Teo En Ming
1 sibling, 1 reply; 86+ messages in thread
From: Pasi Kärkkäinen @ 2009-07-28 12:32 UTC (permalink / raw)
To: 'Teo En Ming'; +Cc: 'Boris Derzhavets', xen-devel
On Tue, Jul 28, 2009 at 07:25:58PM +0800, Teo En Ming wrote:
> Dear Boris,
>
> Any way I can change the emulated display driver in Windows HVM guest to a
> better one for game playing?
>
You can't really do that. Qemu (used in Xen HVM domains) only provides basic
2D display adapter, so it's not really suitable for gaming.
If you want to experiment with unstable/development code, you could try VT-d
to passthrough a graphics adapter (the whole device) to HVM guest.
I think there are also some graphics drivers that operate through the
network, ie. communicate with dom0 graphics hardware, but I don't have any
links to those.
Xen is mostly a server virtualization software/solution nowadays..
-- Pasi
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> -----Original Message-----
>
> From: Boris Derzhavets <bderzhavets@yahoo.com>
>
> To: enming.teo@asiasoftsea.net, pasik@iki.fi
>
> Cc: xen-devel@lists.xensource.com
>
> Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
>
> Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
>
>
>
> It's really exciting ;)
>
> Boris.
>
> --- On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
>
> From: Teo En Ming <enming.teo@asiasoftsea.net>
> Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
> To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>,
pasik@iki.fi
> Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> xen-devel@lists.xensource.com
> Date: Tuesday, July 28, 2009, 7:07 AM
>
>
> Hi,
>
>
>
> I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0 Kernel
> 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
>
>
>
> Please see screenshots here:
>
>
>
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
irtual-machine-on.html
>
>
>
> Can I change the emulated display adapter driver in Windows XP HVM
> guest under Xen to a better one so that I can play games?
>
>
>
> Thank you!!!
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
>
> -----Original
> Message-----
>
> From: "Teo En Ming (Zhang Enming)"
> <enming.teo@asiasoftsea.net>
>
> To: <pasik@iki.fi>
>
> Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> xen-devel@lists.xensource.com
>
> Date: Tue, 28 Jul 2009 19:13:34 +0800
>
> Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> PVOPS Kernel
>
>
>
>
>
> Dear All,
>
>
>
> I have managed to virtualize Windows 7 32-bit as a HVM guest on
> Xen 3.4.1
>
> RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> operating
>
> system.
>
>
>
> Please see screenshots here:
>
>
>
>
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
>
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
i]
>
>
> rtual-machine-on-xen.html
>
>
>
> I have uploaded 24 pictures so far at the time of this writing.
>
>
>
> Regards,
>
>
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
>
> -----Original Message-----
>
> From: xen-devel-bounces@lists.xensource.com
>
> [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi
> Kärkkäinen
>
> Sent: Monday, July 27, 2009 11:24 PM
>
> To: Teo En Ming
>
> Cc: Boris Derzhavets; xen-devel@lists.xensource.com
>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> Jeremy's PVOPS
>
> Kernel
>
>
>
> On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
>
> > Dear Pasi,
>
> >
>
> > Any idea on what benchmark tools I can use to measure I/O
> performance of
>
> my
>
> > virtual machines?
>
> >
>
>
>
> Well for simple streaming IO tests you can use dd, it supports
> multiple
>
> block sizes, O_DIRECT etc.
>
>
>
> If you need multithreaded/multiprocess tests, or filesystem IO
> tests, then
>
> you need something more sophisticated.. bonnie++, ltp disktest,
> fio, iozone
>
> etc. Google is your friend.
>
>
>
> -- Pasi
>
>
>
> > Thank you.
>
> >
>
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>
> > BEng(Hons)(Mechanical Engineering)
>
> >
>
> > Technical Support Engineer
>
> >
>
> > Information Technology Department
>
> >
>
> > Asiasoft Online Pte Ltd
>
> >
>
> > Tampines Central 1 #04-01 Tampines Plaza
>
> >
>
> > Singapore 529541
>
> >
>
> > Republic of Singapore
>
> >
>
> > Mobile Phone: +65-9648-9798
>
> >
>
> > MSN: teoenming@hotmail.com
>
> >
>
> >
>
> > -----Original Message-----
>
> >
>
> > From: Pasi Kärkkäinen <pasik@iki.fi>
>
> >
>
> > To: Teo En Ming <enming.teo@asiasoftsea.net>
>
> >
>
> > Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
>
> xen-devel@lists.xensource.com
>
> >
>
> > Date: Mon, 27 Jul 2009 18:01:55 +0300
>
> >
>
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> Jeremy's PVOPS
>
> > Kernel
>
> >
>
> >
>
> >
>
> >
>
> > On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
>
> >
>
> > > Dear Boris,
>
> >
>
> > >
>
> >
>
> > > Based on your given information, I have managed to
> configure static IP
>
> >
>
> > > address inside OpenSolaris UNIX PV guest.
>
> >
>
> > >
>
> >
>
> > > These are the two crucial lines:
>
> >
>
> > >
>
> >
>
> > > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
> /etc/hostname.xnf0
>
> >
>
> > > echo 192.168.1.102 > /etc/defaultrouter
>
> >
>
> > >
>
> >
>
> > > Please see screenshot here:
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
>
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
>
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
1]
>
>
> 600-h/03.jpeg
>
> >
>
>
>
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
>
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
]
>
>
> 1600-h/03.jpeg]
>
> >
>
> > >
>
> >
>
> > > May I know whether there are any PV device drivers for
> me to install to
>
> >
>
> > > improve PV guests' performance? What are the
> recommended benchmark tools
>
>
>
> > to
>
> >
>
> > > measure I/O performance of PV guests?
>
> >
>
> > >
>
> >
>
> >
>
> >
>
> > PV guest doesn't need any additional drivers. Like the name
> PV says, it's
>
> >
>
> > paravirtual, and uses the optimized drivers/interfaces
> out-of-the-box.
>
> >
>
> >
>
> >
>
> > -- Pasi
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > _______________________________________________
>
> >
>
> > Xen-devel mailing list
>
> >
>
> > Xen-devel@lists.xensource.com
>
> >
>
> > http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]
>
> [http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]]
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
>
>
>
> No virus found in this incoming message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/]
>
> Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date:
> 07/26/09
>
> 17:59:00
>
>
>
> No virus found in this outgoing message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/]
>
> Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> 07/27/09
>
> 17:59:00
>
>
>
>
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
>
>
>
> No virus found in this incoming message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/]
>
> Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> 07/27/09
>
> 17:59:00
>
>
>
> No virus found in this outgoing message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/]
>
> Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> 07/27/09
>
> 17:59:00
>
>
>
>
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
17:59:00
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
17:59:00
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-28 12:27 ` Teo En Ming
@ 2009-07-28 12:48 ` Pasi Kärkkäinen
2009-07-28 13:05 ` Teo En Ming
0 siblings, 1 reply; 86+ messages in thread
From: Pasi Kärkkäinen @ 2009-07-28 12:48 UTC (permalink / raw)
To: Teo En Ming; +Cc: 'Boris Derzhavets', xen-devel
On Tue, Jul 28, 2009 at 08:27:35PM +0800, Teo En Ming wrote:
> Dear Pasi,
>
> I thought only paravirtualized guests allow PCI devices to be passed through
> from the Dom 0 host? Fully virtualized guests like Windows are not able to
> access PCI devices directly in Dom 0.
>
Xen supports PCI device passthrough to paravirtualized domUs without any
additional hardware support/requirements.
PCI device passthrough to HVM domains requires VT-d (iommu) support.
> Does Core 2 Duo support Intel VT-d? Or only in Xeons?
>
VT-d support is in the chipset. Not many chipsets have it yet.. And there
are bugs in the VT-d support in many motherboards..
> I am using Xen 3.4.1 testing code right now. Does it support PCI device pass
> through?
>
Yes, I think Xen 3.4.1 has VT-d support. Although the code is still not very
mature, especially with graphics cards there are a lot of problems.
See xen-devel and xen-users archives for more information.
-- Pasi
> Thank you.
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> -----Original Message-----
>
> From: Pasi Kärkkäinen <pasik@iki.fi>
>
> To: "'Teo En Ming'" <enming.teo@asiasoftsea.net>
>
> Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> xen-devel@lists.xensource.com
>
> Date: Tue, 28 Jul 2009 20:32:10 +0800
>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
>
>
>
> On Tue, Jul 28, 2009 at 07:25:58PM +0800, Teo En Ming wrote:
>
> > Dear Boris,
>
> >
>
> > Any way I can change the emulated display driver in Windows HVM guest to a
>
>
>
> > better one for game playing?
>
> >
>
>
>
> You can't really do that. Qemu (used in Xen HVM domains) only provides basic
>
> 2D display adapter, so it's not really suitable for gaming.
>
>
>
> If you want to experiment with unstable/development code, you could try VT-d
>
> to passthrough a graphics adapter (the whole device) to HVM guest.
>
>
>
> I think there are also some graphics drivers that operate through the
>
> network, ie. communicate with dom0 graphics hardware, but I don't have any
>
> links to those.
>
>
>
> Xen is mostly a server virtualization software/solution nowadays..
>
>
>
> -- Pasi
>
>
>
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>
> > BEng(Hons)(Mechanical Engineering)
>
> >
>
> > Technical Support Engineer
>
> >
>
> > Information Technology Department
>
> >
>
> > Asiasoft Online Pte Ltd
>
> >
>
> > Tampines Central 1 #04-01 Tampines Plaza
>
> >
>
> > Singapore 529541
>
> >
>
> > Republic of Singapore
>
> >
>
> > Mobile Phone: +65-9648-9798
>
> >
>
> > MSN: teoenming@hotmail.com
>
> >
>
> >
>
> > -----Original Message-----
>
> >
>
> > From: Boris Derzhavets <bderzhavets@yahoo.com>
>
> >
>
> > To: enming.teo@asiasoftsea.net, pasik@iki.fi
>
> >
>
> > Cc: xen-devel@lists.xensource.com
>
> >
>
> > Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
>
> >
>
> > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
>
> > Kernel
>
> >
>
> >
>
> >
>
> >
>
> > It's really exciting ;)
>
> >
>
> > Boris.
>
> >
>
> > --- On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
>
> >
>
> > From: Teo En Ming <enming.teo@asiasoftsea.net>
>
> > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
>
> > Kernel
>
> > To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>,
>
> pasik@iki.fi
>
> > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
>
> > xen-devel@lists.xensource.com
>
> > Date: Tuesday, July 28, 2009, 7:07 AM
>
> >
>
> >
>
> > Hi,
>
> >
>
> >
>
> >
>
> > I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0 Kernel
>
> > 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
>
> >
>
> >
>
> >
>
> > Please see screenshots here:
>
> >
>
> >
>
> >
>
> >
>
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
> [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v]
>
> irtual-machine-on.html
>
> >
>
> >
>
> >
>
> > Can I change the emulated display adapter driver in Windows XP HVM
>
> > guest under Xen to a better one so that I can play games?
>
> >
>
> >
>
> >
>
> > Thank you!!!
>
> >
>
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>
> > BEng(Hons)(Mechanical Engineering)
>
> >
>
> > Technical Support Engineer
>
> >
>
> > Information Technology Department
>
> >
>
> > Asiasoft Online Pte Ltd
>
> >
>
> > Tampines Central 1 #04-01 Tampines Plaza
>
> >
>
> > Singapore 529541
>
> >
>
> > Republic of Singapore
>
> >
>
> > Mobile Phone: +65-9648-9798
>
> >
>
> > MSN: teoenming@hotmail.com
>
> >
>
> >
>
> >
>
> > -----Original
>
> > Message-----
>
> >
>
> > From: "Teo En Ming (Zhang Enming)"
>
> > <enming.teo@asiasoftsea.net>
>
> >
>
> > To: <pasik@iki.fi>
>
> >
>
> > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
>
> > xen-devel@lists.xensource.com
>
> >
>
> > Date: Tue, 28 Jul 2009 19:13:34 +0800
>
> >
>
> > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
>
> > PVOPS Kernel
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > Dear All,
>
> >
>
> >
>
> >
>
> > I have managed to virtualize Windows 7 32-bit as a HVM guest on
>
> > Xen 3.4.1
>
> >
>
> > RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
>
> > operating
>
> >
>
> > system.
>
> >
>
> >
>
> >
>
> > Please see screenshots here:
>
> >
>
> >
>
> >
>
> >
>
> >
>
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
> [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi]
>
>
>
> >
>
> [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v]
>
> i]
>
> >
>
> >
>
> > rtual-machine-on-xen.html
>
> >
>
> >
>
> >
>
> > I have uploaded 24 pictures so far at the time of this writing.
>
> >
>
> >
>
> >
>
> > Regards,
>
> >
>
> >
>
> >
>
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>
> >
>
> > BEng(Hons)(Mechanical Engineering)
>
> >
>
> > Technical Support Engineer
>
> >
>
> > Information Technology Department
>
> >
>
> > Asiasoft Online Pte Ltd
>
> >
>
> > Tampines Central 1 #04-01 Tampines Plaza
>
> >
>
> > Singapore 529541
>
> >
>
> > Republic of Singapore
>
> >
>
> > Mobile: +65-9648-9798
>
> >
>
> > MSN: teoenming@hotmail.com
>
> >
>
> >
>
> >
>
> > -----Original Message-----
>
> >
>
> > From: xen-devel-bounces@lists.xensource.com
>
> >
>
> > [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi
>
> > Kärkkäinen
>
> >
>
> > Sent: Monday, July 27, 2009 11:24 PM
>
> >
>
> > To: Teo En Ming
>
> >
>
> > Cc: Boris Derzhavets; xen-devel@lists.xensource.com
>
> >
>
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
>
> > Jeremy's PVOPS
>
> >
>
> > Kernel
>
> >
>
> >
>
> >
>
> > On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
>
> >
>
> > > Dear Pasi,
>
> >
>
> > >
>
> >
>
> > > Any idea on what benchmark tools I can use to measure I/O
>
> > performance of
>
> >
>
> > my
>
> >
>
> > > virtual machines?
>
> >
>
> > >
>
> >
>
> >
>
> >
>
> > Well for simple streaming IO tests you can use dd, it supports
>
> > multiple
>
> >
>
> > block sizes, O_DIRECT etc.
>
> >
>
> >
>
> >
>
> > If you need multithreaded/multiprocess tests, or filesystem IO
>
> > tests, then
>
> >
>
> > you need something more sophisticated.. bonnie++, ltp disktest,
>
> > fio, iozone
>
> >
>
> > etc. Google is your friend.
>
> >
>
> >
>
> >
>
> > -- Pasi
>
> >
>
> >
>
> >
>
> > > Thank you.
>
> >
>
> > >
>
> >
>
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>
> >
>
> > > BEng(Hons)(Mechanical Engineering)
>
> >
>
> > >
>
> >
>
> > > Technical Support Engineer
>
> >
>
> > >
>
> >
>
> > > Information Technology Department
>
> >
>
> > >
>
> >
>
> > > Asiasoft Online Pte Ltd
>
> >
>
> > >
>
> >
>
> > > Tampines Central 1 #04-01 Tampines Plaza
>
> >
>
> > >
>
> >
>
> > > Singapore 529541
>
> >
>
> > >
>
> >
>
> > > Republic of Singapore
>
> >
>
> > >
>
> >
>
> > > Mobile Phone: +65-9648-9798
>
> >
>
> > >
>
> >
>
> > > MSN: teoenming@hotmail.com
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > -----Original Message-----
>
> >
>
> > >
>
> >
>
> > > From: Pasi Kärkkäinen <pasik@iki.fi>
>
> >
>
> > >
>
> >
>
> > > To: Teo En Ming <enming.teo@asiasoftsea.net>
>
> >
>
> > >
>
> >
>
> > > Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
>
> >
>
> > xen-devel@lists.xensource.com
>
> >
>
> > >
>
> >
>
> > > Date: Mon, 27 Jul 2009 18:01:55 +0300
>
> >
>
> > >
>
> >
>
> > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
>
> > Jeremy's PVOPS
>
> >
>
> > > Kernel
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
>
> >
>
> > >
>
> >
>
> > > > Dear Boris,
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > > Based on your given information, I have managed to
>
> > configure static IP
>
> >
>
> > >
>
> >
>
> > > > address inside OpenSolaris UNIX PV guest.
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > > These are the two crucial lines:
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
>
> > /etc/hostname.xnf0
>
> >
>
> > >
>
> >
>
> > > > echo 192.168.1.102 > /etc/defaultrouter
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > > Please see screenshot here:
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> >
>
> >
>
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
> [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1]
>
>
>
> >
>
> [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
>
> 1]
>
> >
>
> >
>
> > 600-h/03.jpeg
>
> >
>
> > >
>
> >
>
> >
>
> >
>
> [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
>
>
>
> >
>
> [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
>
> ]
>
> >
>
> >
>
> > 1600-h/03.jpeg]
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > > May I know whether there are any PV device drivers for
>
> > me to install to
>
> >
>
> > >
>
> >
>
> > > > improve PV guests' performance? What are the
>
> > recommended benchmark tools
>
> >
>
> >
>
> >
>
> > > to
>
> >
>
> > >
>
> >
>
> > > > measure I/O performance of PV guests?
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > PV guest doesn't need any additional drivers. Like the name
>
> > PV says, it's
>
> >
>
> > >
>
> >
>
> > > paravirtual, and uses the optimized drivers/interfaces
>
> > out-of-the-box.
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > -- Pasi
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > _______________________________________________
>
> >
>
> > >
>
> >
>
> > > Xen-devel mailing list
>
> >
>
> > >
>
> >
>
> > > Xen-devel@lists.xensource.com
>
> >
>
> > >
>
> >
>
> > > http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]
>
> > [http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]]
>
> >
>
> > [http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]
>
> > [http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]]]
>
> >
>
> >
>
> >
>
> > _______________________________________________
>
> >
>
> > Xen-devel mailing list
>
> >
>
> > Xen-devel@lists.xensource.com
>
> >
>
> > http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]
>
> [http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]]
>
> >
>
> >
>
> >
>
> > No virus found in this incoming message.
>
> >
>
> > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> [http://www.avg.com/]]
>
> >
>
> > Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date:
>
> > 07/26/09
>
> >
>
> > 17:59:00
>
> >
>
> >
>
> >
>
> > No virus found in this outgoing message.
>
> >
>
> > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> [http://www.avg.com/]]
>
> >
>
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
>
> > 07/27/09
>
> >
>
> > 17:59:00
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > _______________________________________________
>
> >
>
> > Xen-devel mailing list
>
> >
>
> > Xen-devel@lists.xensource.com
>
> >
>
> > http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]
>
> [http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]]
>
> >
>
> >
>
> >
>
> > No virus found in this incoming message.
>
> >
>
> > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> [http://www.avg.com/]]
>
> >
>
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
>
> > 07/27/09
>
> >
>
> > 17:59:00
>
> >
>
> >
>
> >
>
> > No virus found in this outgoing message.
>
> >
>
> > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> [http://www.avg.com/]]
>
> >
>
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
>
> > 07/27/09
>
> >
>
> > 17:59:00
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > _______________________________________________
>
> >
>
> > Xen-devel mailing list
>
> >
>
> > Xen-devel@lists.xensource.com
>
> >
>
> > http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]
>
> [http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]]
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
>
>
>
> No virus found in this incoming message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/]
>
> Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
>
> 17:59:00
>
>
>
> No virus found in this outgoing message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/]
>
> Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
>
> 17:59:00
>
>
>
>
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-28 12:52 Boris Derzhavets
0 siblings, 0 replies; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-28 12:52 UTC (permalink / raw)
To: Pasi Kärkkäinen, enming.teo; +Cc: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 17108 bytes --]
C2D yes. Your board's BIOS has to support VT-d as well. I guess it's known bug for ASUS P6T.
B.
On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
From: Teo En Ming <enming.teo@asiasoftsea.net>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Pasi Kärkkäinen" <pasik@iki.fi>
Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Tuesday, July 28, 2009, 8:27 AM
Dear Pasi,
I thought only paravirtualized guests allow PCI devices to be passed
through from the Dom 0 host? Fully virtualized guests like Windows are not
able to access PCI devices directly in Dom 0.
Does Core 2 Duo support Intel VT-d? Or only in Xeons?
I am using Xen 3.4.1 testing code right now. Does it support PCI device
pass through?
Thank you.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original
Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: "'Teo En Ming'" <enming.teo@asiasoftsea.net>
Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Date: Tue, 28 Jul 2009 20:32:10 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS Kernel
On Tue, Jul 28,
2009 at 07:25:58PM +0800, Teo En Ming wrote:
> Dear Boris,
>
> Any way I can change the emulated display driver in Windows
HVM guest to a
> better one for game playing?
>
You can't really do that. Qemu (used in Xen HVM domains) only
provides basic
2D display adapter, so it's not really suitable for gaming.
If you want to experiment with unstable/development code, you
could try VT-d
to passthrough a graphics adapter (the whole device) to HVM
guest.
I think there are also some graphics drivers that operate through
the
network, ie. communicate with dom0 graphics hardware, but I don't
have any
links to those.
Xen is mostly a server virtualization software/solution
nowadays..
-- Pasi
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> -----Original Message-----
>
> From: Boris Derzhavets <bderzhavets@yahoo.com>
>
> To: enming.teo@asiasoftsea.net, pasik@iki.fi
>
> Cc: xen-devel@lists.xensource.com
>
> Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
>
> Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS
> Kernel
>
>
>
>
> It's really exciting ;)
>
> Boris.
>
> --- On Tue, 7/28/09, Teo En Ming
<enming.teo@asiasoftsea.net> wrote:
>
> From: Teo En Ming <enming.teo@asiasoftsea.net>
> Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS
> Kernel
> To: "Teo En Ming (Zhang Enming)"
<enming.teo@asiasoftsea.net>,
pasik@iki.fi
> Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> xen-devel@lists.xensource.com
> Date: Tuesday, July 28, 2009, 7:07 AM
>
>
> Hi,
>
>
>
> I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0
Kernel
> 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
>
>
>
> Please see screenshots here:
>
>
>
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
irtual-machine-on.html
>
>
>
> Can I change the emulated display adapter driver in Windows
XP HVM
> guest under Xen to a better one so that I can play games?
>
>
>
> Thank you!!!
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
>
> -----Original
> Message-----
>
> From: "Teo En Ming (Zhang Enming)"
> <enming.teo@asiasoftsea.net>
>
> To: <pasik@iki.fi>
>
> Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> xen-devel@lists.xensource.com
>
> Date: Tue, 28 Jul 2009 19:13:34 +0800
>
> Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0
in Jeremy's
> PVOPS Kernel
>
>
>
>
>
> Dear All,
>
>
>
> I have managed to virtualize Windows 7 32-bit as a HVM
guest on
> Xen 3.4.1
>
> RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux
32-bit host
> operating
>
> system.
>
>
>
> Please see screenshots here:
>
>
>
>
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
>
[
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
i]
>
>
> rtual-machine-on-xen.html
>
>
>
> I have uploaded 24 pictures so far at the time of this
writing.
>
>
>
> Regards,
>
>
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering)
>
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
>
> -----Original Message-----
>
> From: xen-devel-bounces@lists.xensource.com
>
> [mailto:xen-devel-bounces@lists.xensource.com] On
Behalf Of Pasi
> Kärkkäinen
>
> Sent: Monday, July 27, 2009 11:24 PM
>
> To: Teo En Ming
>
> Cc: Boris Derzhavets; xen-devel@lists.xensource.com
>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0
in
> Jeremy's PVOPS
>
> Kernel
>
>
>
> On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming
wrote:
>
> > Dear Pasi,
>
> >
>
> > Any idea on what benchmark tools I can use to
measure I/O
> performance of
>
> my
>
> > virtual machines?
>
> >
>
>
>
> Well for simple streaming IO tests you can use dd, it
supports
> multiple
>
> block sizes, O_DIRECT etc.
>
>
>
> If you need multithreaded/multiprocess tests, or
filesystem IO
> tests, then
>
> you need something more sophisticated.. bonnie++, ltp
disktest,
> fio, iozone
>
> etc. Google is your friend.
>
>
>
> -- Pasi
>
>
>
> > Thank you.
>
> >
>
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering)
>
> > BEng(Hons)(Mechanical Engineering)
>
> >
>
> > Technical Support Engineer
>
> >
>
> > Information Technology Department
>
> >
>
> > Asiasoft Online Pte Ltd
>
> >
>
> > Tampines Central 1 #04-01 Tampines Plaza
>
> >
>
> > Singapore 529541
>
> >
>
> > Republic of Singapore
>
> >
>
> > Mobile Phone: +65-9648-9798
>
> >
>
> > MSN: teoenming@hotmail.com
>
> >
>
> >
>
> > -----Original Message-----
>
> >
>
> > From: Pasi Kärkkäinen <pasik@iki.fi>
>
> >
>
> > To: Teo En Ming
<enming.teo@asiasoftsea.net>
>
> >
>
> > Cc: Boris Derzhavets
<bderzhavets@yahoo.com>,
>
> xen-devel@lists.xensource.com
>
> >
>
> > Date: Mon, 27 Jul 2009 18:01:55 +0300
>
> >
>
> > Subject: Re: [Xen-devel] Unable to Configure Xen
Dom 0 in
> Jeremy's PVOPS
>
> > Kernel
>
> >
>
> >
>
> >
>
> >
>
> > On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En
Ming wrote:
>
> >
>
> > > Dear Boris,
>
> >
>
> > >
>
> >
>
> > > Based on your given information, I have
managed to
> configure static IP
>
> >
>
> > > address inside OpenSolaris UNIX PV guest.
>
> >
>
> > >
>
> >
>
> > > These are the two crucial lines:
>
> >
>
> > >
>
> >
>
> > > echo 192.168.1.45 netmask 255.255.255.0 mtu
1492 >
> /etc/hostname.xnf0
>
> >
>
> > > echo 192.168.1.102 > /etc/defaultrouter
>
> >
>
> > >
>
> >
>
> > > Please see screenshot here:
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
>
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
>
[
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
1]
>
>
> 600-h/03.jpeg
>
> >
>
>
>
[
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
>
[
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
]
>
>
> 1600-h/03.jpeg]
>
> >
>
> > >
>
> >
>
> > > May I know whether there are any PV device
drivers for
> me to install to
>
> >
>
> > > improve PV guests' performance? What are the
> recommended benchmark tools
>
>
>
> > to
>
> >
>
> > > measure I/O performance of PV guests?
>
> >
>
> > >
>
> >
>
> >
>
> >
>
> > PV guest doesn't need any additional drivers.
Like the name
> PV says, it's
>
> >
>
> > paravirtual, and uses the optimized
drivers/interfaces
> out-of-the-box.
>
> >
>
> >
>
> >
>
> > -- Pasi
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > _______________________________________________
>
> >
>
> > Xen-devel mailing list
>
> >
>
> > Xen-devel@lists.xensource.com
>
> >
>
> > http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]
>
> [http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]]
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel
[
http://lists.xensource.com/xen-devel]
>
>
>
> No virus found in this incoming message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/]
>
> Version: 8.5.339 / Virus Database: 270.13.31/2265 -
Release Date:
> 07/26/09
>
> 17:59:00
>
>
>
> No virus found in this outgoing message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/]
>
> Version: 8.5.375 / Virus Database: 270.13.31/2265 -
Release Date:
> 07/27/09
>
> 17:59:00
>
>
>
>
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel
[
http://lists.xensource.com/xen-devel]
>
>
>
> No virus found in this incoming message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/]
>
> Version: 8.5.375 / Virus Database: 270.13.31/2265 -
Release Date:
> 07/27/09
>
> 17:59:00
>
>
>
> No virus found in this outgoing message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/]
>
> Version: 8.5.375 / Virus Database: 270.13.31/2265 -
Release Date:
> 07/27/09
>
> 17:59:00
>
>
>
>
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel
[
http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
No virus found in this incoming message.
Checked by AVG -
www.avg.com
Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
07/27/09
17:59:00
No virus found in this outgoing message.
Checked by AVG -
www.avg.com
Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
07/27/09
17:59:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
-----Inline Attachment Follows-----
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 26852 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-28 12:48 ` Pasi Kärkkäinen
@ 2009-07-28 13:05 ` Teo En Ming
0 siblings, 0 replies; 86+ messages in thread
From: Teo En Ming @ 2009-07-28 13:05 UTC (permalink / raw)
To: Pasi Kärkkäinen; +Cc: 'Boris Derzhavets', xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 38939 bytes --]
Hi,
Here is my lspci -v output:
linux-2785:~ # lspci -v
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM
Controller (rev 02)
Subsystem: Dell Device 0238
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information <?>
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express
Root Port (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [88] Subsystem: Dell Device 0238
Capabilities: [80] Power Management version 3
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
Count=1/1 Enable-
Capabilities: [a0] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel <?>
Capabilities: [140] Root Complex Link <?>
Kernel driver in use: pcieport-driver
00:19.0 Ethernet controller: Intel Corporation 82562V-2 10/100 Network
Connection (rev 02)
Subsystem: Dell Device 0238
Flags: bus master, fast devsel, latency 0, IRQ 20
Memory at fdfc0000 (32-bit, non-prefetchable) [size=128K]
Memory at fdfff000 (32-bit, non-prefetchable) [size=4K]
I/O ports at ff00 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
Count=1/1 Enable-
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 0238
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at fe00 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 0238
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at fd00 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 0238
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at fc00 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device 0238
Flags: bus master, medium devsel, latency 0, IRQ 18
Memory at fdffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 02)
Subsystem: Dell Device 0238
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at fdff4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
Count=1/1 Enable-
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 0238
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at fb00 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 0238
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at fa00 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 0238
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at f900 [size=32]
Capabilities: [50] Vendor Specific Information <?>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device 0238
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at fdffd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01
[Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
Capabilities: [50] Subsystem: Dell Device 0238
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface
Controller (rev 02)
Subsystem: Dell Device 0238
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port
SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Device 0238
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at f800 [size=8]
I/O ports at f700 [size=4]
I/O ports at f600 [size=8]
I/O ports at f500 [size=4]
I/O ports at f400 [size=16]
I/O ports at f300 [size=16]
Capabilities: [70] Power Management version 3
Capabilities: [b0] Vendor Specific Information <?>
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev
02)
Subsystem: Dell Device 0238
Flags: medium devsel, IRQ 18
Memory at fdffc000 (64-bit, non-prefetchable) [size=256]
I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA
IDE Controller (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Device 0238
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at f100 [size=8]
I/O ports at f000 [size=4]
I/O ports at ef00 [size=8]
I/O ports at ee00 [size=4]
I/O ports at ed00 [size=16]
I/O ports at ec00 [size=16]
Capabilities: [70] Power Management version 3
Capabilities: [b0] Vendor Specific Information <?>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8600 GT (rev
a1) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Device 0505
Flags: bus master, fast devsel, latency 0, IRQ 5
Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at cf00 [size=128]
[virtual] Expansion ROM at fb000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+
Count=1/1 Enable-
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [100] Virtual Channel <?>
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information <?>
Kernel modules: nvidiafb
>From what I read here at the Intel forum page
http://software.intel.com/en-us/forums/virtualization-software-development/topic/56802/
it seems only the Intel Server chipset 5400 and the Intel Desktop chipsets
Q35 and Q45 support VT-d.
My lab pc is not supported.
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen <pasik@iki.fi>
To: Teo En Ming <enming.teo@asiasoftsea.net>
Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
Date: Tue, 28 Jul 2009 15:48:03 +0300
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Tue, Jul 28, 2009 at 08:27:35PM +0800, Teo En Ming wrote:
> Dear Pasi,
>
> I thought only paravirtualized guests allow PCI devices to be passed
through
> from the Dom 0 host? Fully virtualized guests like Windows are not able to
> access PCI devices directly in Dom 0.
>
Xen supports PCI device passthrough to paravirtualized domUs without any
additional hardware support/requirements.
PCI device passthrough to HVM domains requires VT-d (iommu) support.
> Does Core 2 Duo support Intel VT-d? Or only in Xeons?
>
VT-d support is in the chipset. Not many chipsets have it yet.. And there
are bugs in the VT-d support in many motherboards..
> I am using Xen 3.4.1 testing code right now. Does it support PCI device
pass
> through?
>
Yes, I think Xen 3.4.1 has VT-d support. Although the code is still not very
mature, especially with graphics cards there are a lot of problems.
See xen-devel and xen-users archives for more information.
-- Pasi
> Thank you.
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> -----Original Message-----
>
> From: Pasi Kärkkäinen <pasik@iki.fi>
>
> To: "'Teo En Ming'" <enming.teo@asiasoftsea.net>
>
> Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> xen-devel@lists.xensource.com
>
> Date: Tue, 28 Jul 2009 20:32:10 +0800
>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
>
>
>
> On Tue, Jul 28, 2009 at 07:25:58PM +0800, Teo En Ming wrote:
>
> > Dear Boris,
>
> >
>
> > Any way I can change the emulated display driver in Windows HVM guest to
a
>
>
>
> > better one for game playing?
>
> >
>
>
>
> You can't really do that. Qemu (used in Xen HVM domains) only provides
basic
>
> 2D display adapter, so it's not really suitable for gaming.
>
>
>
> If you want to experiment with unstable/development code, you could try
VT-d
>
> to passthrough a graphics adapter (the whole device) to HVM guest.
>
>
>
> I think there are also some graphics drivers that operate through the
>
> network, ie. communicate with dom0 graphics hardware, but I don't have any
>
> links to those.
>
>
>
> Xen is mostly a server virtualization software/solution nowadays..
>
>
>
> -- Pasi
>
>
>
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>
> > BEng(Hons)(Mechanical Engineering)
>
> >
>
> > Technical Support Engineer
>
> >
>
> > Information Technology Department
>
> >
>
> > Asiasoft Online Pte Ltd
>
> >
>
> > Tampines Central 1 #04-01 Tampines Plaza
>
> >
>
> > Singapore 529541
>
> >
>
> > Republic of Singapore
>
> >
>
> > Mobile Phone: +65-9648-9798
>
> >
>
> > MSN: teoenming@hotmail.com
>
> >
>
> >
>
> > -----Original Message-----
>
> >
>
> > From: Boris Derzhavets <bderzhavets@yahoo.com>
>
> >
>
> > To: enming.teo@asiasoftsea.net, pasik@iki.fi
>
> >
>
> > Cc: xen-devel@lists.xensource.com
>
> >
>
> > Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
>
> >
>
> > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
>
> > Kernel
>
> >
>
> >
>
> >
>
> >
>
> > It's really exciting ;)
>
> >
>
> > Boris.
>
> >
>
> > --- On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
>
> >
>
> > From: Teo En Ming <enming.teo@asiasoftsea.net>
>
> > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
>
> > Kernel
>
> > To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>,
>
> pasik@iki.fi
>
> > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
>
> > xen-devel@lists.xensource.com
>
> > Date: Tuesday, July 28, 2009, 7:07 AM
>
> >
>
> >
>
> > Hi,
>
> >
>
> >
>
> >
>
> > I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0 Kernel
>
> > 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
>
> >
>
> >
>
> >
>
> > Please see screenshots here:
>
> >
>
> >
>
> >
>
> >
>
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v]
>
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v]]
>
> irtual-machine-on.html
>
> >
>
> >
>
> >
>
> > Can I change the emulated display adapter driver in Windows XP HVM
>
> > guest under Xen to a better one so that I can play games?
>
> >
>
> >
>
> >
>
> > Thank you!!!
>
> >
>
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>
> > BEng(Hons)(Mechanical Engineering)
>
> >
>
> > Technical Support Engineer
>
> >
>
> > Information Technology Department
>
> >
>
> > Asiasoft Online Pte Ltd
>
> >
>
> > Tampines Central 1 #04-01 Tampines Plaza
>
> >
>
> > Singapore 529541
>
> >
>
> > Republic of Singapore
>
> >
>
> > Mobile Phone: +65-9648-9798
>
> >
>
> > MSN: teoenming@hotmail.com
>
> >
>
> >
>
> >
>
> > -----Original
>
> > Message-----
>
> >
>
> > From: "Teo En Ming (Zhang Enming)"
>
> > <enming.teo@asiasoftsea.net>
>
> >
>
> > To: <pasik@iki.fi>
>
> >
>
> > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
>
> > xen-devel@lists.xensource.com
>
> >
>
> > Date: Tue, 28 Jul 2009 19:13:34 +0800
>
> >
>
> > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
>
> > PVOPS Kernel
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > Dear All,
>
> >
>
> >
>
> >
>
> > I have managed to virtualize Windows 7 32-bit as a HVM guest on
>
> > Xen 3.4.1
>
> >
>
> > RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
>
> > operating
>
> >
>
> > system.
>
> >
>
> >
>
> >
>
> > Please see screenshots here:
>
> >
>
> >
>
> >
>
> >
>
> >
>
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi]
>
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi]]
>
>
>
> >
>
>
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v]
>
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v]]
>
> i]
>
> >
>
> >
>
> > rtual-machine-on-xen.html
>
> >
>
> >
>
> >
>
> > I have uploaded 24 pictures so far at the time of this writing.
>
> >
>
> >
>
> >
>
> > Regards,
>
> >
>
> >
>
> >
>
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>
> >
>
> > BEng(Hons)(Mechanical Engineering)
>
> >
>
> > Technical Support Engineer
>
> >
>
> > Information Technology Department
>
> >
>
> > Asiasoft Online Pte Ltd
>
> >
>
> > Tampines Central 1 #04-01 Tampines Plaza
>
> >
>
> > Singapore 529541
>
> >
>
> > Republic of Singapore
>
> >
>
> > Mobile: +65-9648-9798
>
> >
>
> > MSN: teoenming@hotmail.com
>
> >
>
> >
>
> >
>
> > -----Original Message-----
>
> >
>
> > From: xen-devel-bounces@lists.xensource.com
>
> >
>
> > [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi
>
> > Kärkkäinen
>
> >
>
> > Sent: Monday, July 27, 2009 11:24 PM
>
> >
>
> > To: Teo En Ming
>
> >
>
> > Cc: Boris Derzhavets; xen-devel@lists.xensource.com
>
> >
>
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
>
> > Jeremy's PVOPS
>
> >
>
> > Kernel
>
> >
>
> >
>
> >
>
> > On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
>
> >
>
> > > Dear Pasi,
>
> >
>
> > >
>
> >
>
> > > Any idea on what benchmark tools I can use to measure I/O
>
> > performance of
>
> >
>
> > my
>
> >
>
> > > virtual machines?
>
> >
>
> > >
>
> >
>
> >
>
> >
>
> > Well for simple streaming IO tests you can use dd, it supports
>
> > multiple
>
> >
>
> > block sizes, O_DIRECT etc.
>
> >
>
> >
>
> >
>
> > If you need multithreaded/multiprocess tests, or filesystem IO
>
> > tests, then
>
> >
>
> > you need something more sophisticated.. bonnie++, ltp disktest,
>
> > fio, iozone
>
> >
>
> > etc. Google is your friend.
>
> >
>
> >
>
> >
>
> > -- Pasi
>
> >
>
> >
>
> >
>
> > > Thank you.
>
> >
>
> > >
>
> >
>
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>
> >
>
> > > BEng(Hons)(Mechanical Engineering)
>
> >
>
> > >
>
> >
>
> > > Technical Support Engineer
>
> >
>
> > >
>
> >
>
> > > Information Technology Department
>
> >
>
> > >
>
> >
>
> > > Asiasoft Online Pte Ltd
>
> >
>
> > >
>
> >
>
> > > Tampines Central 1 #04-01 Tampines Plaza
>
> >
>
> > >
>
> >
>
> > > Singapore 529541
>
> >
>
> > >
>
> >
>
> > > Republic of Singapore
>
> >
>
> > >
>
> >
>
> > > Mobile Phone: +65-9648-9798
>
> >
>
> > >
>
> >
>
> > > MSN: teoenming@hotmail.com
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > -----Original Message-----
>
> >
>
> > >
>
> >
>
> > > From: Pasi Kärkkäinen <pasik@iki.fi>
>
> >
>
> > >
>
> >
>
> > > To: Teo En Ming <enming.teo@asiasoftsea.net>
>
> >
>
> > >
>
> >
>
> > > Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
>
> >
>
> > xen-devel@lists.xensource.com
>
> >
>
> > >
>
> >
>
> > > Date: Mon, 27 Jul 2009 18:01:55 +0300
>
> >
>
> > >
>
> >
>
> > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
>
> > Jeremy's PVOPS
>
> >
>
> > > Kernel
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
>
> >
>
> > >
>
> >
>
> > > > Dear Boris,
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > > Based on your given information, I have managed to
>
> > configure static IP
>
> >
>
> > >
>
> >
>
> > > > address inside OpenSolaris UNIX PV guest.
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > > These are the two crucial lines:
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
>
> > /etc/hostname.xnf0
>
> >
>
> > >
>
> >
>
> > > > echo 192.168.1.102 > /etc/defaultrouter
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > > Please see screenshot here:
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> >
>
> >
>
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1]
>
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1]]
>
>
>
> >
>
>
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
>
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]]
>
> 1]
>
> >
>
> >
>
> > 600-h/03.jpeg
>
> >
>
> > >
>
> >
>
> >
>
> >
>
>
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
>
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]]
>
>
>
> >
>
>
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
>
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]]
>
> ]
>
> >
>
> >
>
> > 1600-h/03.jpeg]
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > > May I know whether there are any PV device drivers for
>
> > me to install to
>
> >
>
> > >
>
> >
>
> > > > improve PV guests' performance? What are the
>
> > recommended benchmark tools
>
> >
>
> >
>
> >
>
> > > to
>
> >
>
> > >
>
> >
>
> > > > measure I/O performance of PV guests?
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > PV guest doesn't need any additional drivers. Like the name
>
> > PV says, it's
>
> >
>
> > >
>
> >
>
> > > paravirtual, and uses the optimized drivers/interfaces
>
> > out-of-the-box.
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > -- Pasi
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > _______________________________________________
>
> >
>
> > >
>
> >
>
> > > Xen-devel mailing list
>
> >
>
> > >
>
> >
>
> > > Xen-devel@lists.xensource.com
>
> >
>
> > >
>
> >
>
> > > http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
>
> > [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]]
>
> >
>
> > [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
>
> > [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]]]
>
> >
>
> >
>
> >
>
> > _______________________________________________
>
> >
>
> > Xen-devel mailing list
>
> >
>
> > Xen-devel@lists.xensource.com
>
> >
>
> > http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
>
> [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]]
>
> >
>
> >
>
> >
>
> > No virus found in this incoming message.
>
> >
>
> > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
[http://www.avg.com/]] [http://www.avg.com/ [http://www.avg.com/]
> [http://www.avg.com/ [http://www.avg.com/]]]
>
> >
>
> > Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date:
>
> > 07/26/09
>
> >
>
> > 17:59:00
>
> >
>
> >
>
> >
>
> > No virus found in this outgoing message.
>
> >
>
> > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
[http://www.avg.com/]] [http://www.avg.com/ [http://www.avg.com/]
> [http://www.avg.com/ [http://www.avg.com/]]]
>
> >
>
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
>
> > 07/27/09
>
> >
>
> > 17:59:00
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > _______________________________________________
>
> >
>
> > Xen-devel mailing list
>
> >
>
> > Xen-devel@lists.xensource.com
>
> >
>
> > http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
>
> [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]]
>
> >
>
> >
>
> >
>
> > No virus found in this incoming message.
>
> >
>
> > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
[http://www.avg.com/]] [http://www.avg.com/ [http://www.avg.com/]
> [http://www.avg.com/ [http://www.avg.com/]]]
>
> >
>
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
>
> > 07/27/09
>
> >
>
> > 17:59:00
>
> >
>
> >
>
> >
>
> > No virus found in this outgoing message.
>
> >
>
> > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
[http://www.avg.com/]] [http://www.avg.com/ [http://www.avg.com/]
> [http://www.avg.com/ [http://www.avg.com/]]]
>
> >
>
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
>
> > 07/27/09
>
> >
>
> > 17:59:00
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > _______________________________________________
>
> >
>
> > Xen-devel mailing list
>
> >
>
> > Xen-devel@lists.xensource.com
>
> >
>
> > http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
>
> [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]]
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel] [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
>
>
>
> No virus found in this incoming message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
[http://www.avg.com/]]
>
> Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
>
> 17:59:00
>
>
>
> No virus found in this outgoing message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
[http://www.avg.com/]]
>
> Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
>
> 17:59:00
>
>
>
>
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel] [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
[-- Attachment #1.2: Type: text/html, Size: 95482 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-28 13:49 Boris Derzhavets
2009-07-28 14:24 ` Pasi Kärkkäinen
0 siblings, 1 reply; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-28 13:49 UTC (permalink / raw)
To: Teo En Ming, Pasi Kärkkäinen; +Cc: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 18732 bytes --]
>Xen supports PCI device passthrough to paravirtualized domUs without any
> additional hardware support/requirements.
It was never my concern. But , i guess it works for SCSI drives , not SATA.
Boris.
--- On Tue, 7/28/09, Pasi Kärkkäinen <pasik@iki.fi> wrote:
From: Pasi Kärkkäinen <pasik@iki.fi>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Teo En Ming" <enming.teo@asiasoftsea.net>
Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
Date: Tuesday, July 28, 2009, 8:48 AM
On Tue, Jul 28, 2009 at 08:27:35PM +0800, Teo En Ming wrote:
> Dear Pasi,
>
> I thought only paravirtualized guests allow PCI devices to be passed through
> from the Dom 0 host? Fully virtualized guests like Windows are not able to
> access PCI devices directly in Dom 0.
>
Xen supports PCI device passthrough to paravirtualized domUs without any
additional hardware support/requirements.
PCI device passthrough to HVM domains requires VT-d (iommu) support.
> Does Core 2 Duo support Intel VT-d? Or only in Xeons?
>
VT-d support is in the chipset. Not many chipsets have it yet.. And there
are bugs in the VT-d support in many motherboards..
> I am using Xen 3.4.1 testing code right now. Does it support PCI device pass
> through?
>
Yes, I think Xen 3.4.1 has VT-d support. Although the code is still not very
mature, especially with graphics cards there are a lot of problems.
See xen-devel and xen-users archives for more information.
-- Pasi
> Thank you.
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
>
> Asiasoft Online Pte Ltd
>
> Tampines Central 1 #04-01 Tampines Plaza
>
> Singapore 529541
>
> Republic of Singapore
>
> Mobile Phone: +65-9648-9798
>
> MSN: teoenming@hotmail.com
>
>
> -----Original Message-----
>
> From: Pasi Kärkkäinen <pasik@iki.fi>
>
> To: "'Teo En Ming'" <enming.teo@asiasoftsea.net>
>
> Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> xen-devel@lists.xensource.com
>
> Date: Tue, 28 Jul 2009 20:32:10 +0800
>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
>
>
>
> On Tue, Jul 28, 2009 at 07:25:58PM +0800, Teo En Ming wrote:
>
> > Dear Boris,
>
> >
>
> > Any way I can change the emulated display driver in Windows HVM guest to a
>
>
>
> > better one for game playing?
>
> >
>
>
>
> You can't really do that. Qemu (used in Xen HVM domains) only provides basic
>
> 2D display adapter, so it's not really suitable for gaming.
>
>
>
> If you want to experiment with unstable/development code, you could try VT-d
>
> to passthrough a graphics adapter (the whole device) to HVM guest.
>
>
>
> I think there are also some graphics drivers that operate through the
>
> network, ie. communicate with dom0 graphics hardware, but I don't have any
>
> links to those.
>
>
>
> Xen is mostly a server virtualization software/solution nowadays..
>
>
>
> -- Pasi
>
>
>
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>
> > BEng(Hons)(Mechanical Engineering)
>
> >
>
> > Technical Support Engineer
>
> >
>
> > Information Technology Department
>
> >
>
> > Asiasoft Online Pte Ltd
>
> >
>
> > Tampines Central 1 #04-01 Tampines Plaza
>
> >
>
> > Singapore 529541
>
> >
>
> > Republic of Singapore
>
> >
>
> > Mobile Phone: +65-9648-9798
>
> >
>
> > MSN: teoenming@hotmail.com
>
> >
>
> >
>
> > -----Original Message-----
>
> >
>
> > From: Boris Derzhavets <bderzhavets@yahoo.com>
>
> >
>
> > To: enming.teo@asiasoftsea.net, pasik@iki.fi
>
> >
>
> > Cc: xen-devel@lists.xensource.com
>
> >
>
> > Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
>
> >
>
> > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
>
> > Kernel
>
> >
>
> >
>
> >
>
> >
>
> > It's really exciting ;)
>
> >
>
> > Boris.
>
> >
>
> > --- On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
>
> >
>
> > From: Teo En Ming <enming.teo@asiasoftsea.net>
>
> > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
>
> > Kernel
>
> > To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>,
>
> pasik@iki.fi
>
> > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
>
> > xen-devel@lists.xensource.com
>
> > Date: Tuesday, July 28, 2009, 7:07 AM
>
> >
>
> >
>
> > Hi,
>
> >
>
> >
>
> >
>
> > I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0 Kernel
>
> > 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
>
> >
>
> >
>
> >
>
> > Please see screenshots here:
>
> >
>
> >
>
> >
>
> >
>
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
> [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v]
>
> irtual-machine-on.html
>
> >
>
> >
>
> >
>
> > Can I change the emulated display adapter driver in Windows XP HVM
>
> > guest under Xen to a better one so that I can play games?
>
> >
>
> >
>
> >
>
> > Thank you!!!
>
> >
>
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>
> > BEng(Hons)(Mechanical Engineering)
>
> >
>
> > Technical Support Engineer
>
> >
>
> > Information Technology Department
>
> >
>
> > Asiasoft Online Pte Ltd
>
> >
>
> > Tampines Central 1 #04-01 Tampines Plaza
>
> >
>
> > Singapore 529541
>
> >
>
> > Republic of Singapore
>
> >
>
> > Mobile Phone: +65-9648-9798
>
> >
>
> > MSN: teoenming@hotmail.com
>
> >
>
> >
>
> >
>
> > -----Original
>
> > Message-----
>
> >
>
> > From: "Teo En Ming (Zhang Enming)"
>
> > <enming.teo@asiasoftsea.net>
>
> >
>
> > To: <pasik@iki.fi>
>
> >
>
> > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
>
> > xen-devel@lists.xensource.com
>
> >
>
> > Date: Tue, 28 Jul 2009 19:13:34 +0800
>
> >
>
> > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
>
> > PVOPS Kernel
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > Dear All,
>
> >
>
> >
>
> >
>
> > I have managed to virtualize Windows 7 32-bit as a HVM guest on
>
> > Xen 3.4.1
>
> >
>
> > RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
>
> > operating
>
> >
>
> > system.
>
> >
>
> >
>
> >
>
> > Please see screenshots here:
>
> >
>
> >
>
> >
>
> >
>
> >
>
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
> [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi]
>
>
>
> >
>
> [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v]
>
> i]
>
> >
>
> >
>
> > rtual-machine-on-xen.html
>
> >
>
> >
>
> >
>
> > I have uploaded 24 pictures so far at the time of this writing.
>
> >
>
> >
>
> >
>
> > Regards,
>
> >
>
> >
>
> >
>
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>
> >
>
> > BEng(Hons)(Mechanical Engineering)
>
> >
>
> > Technical Support Engineer
>
> >
>
> > Information Technology Department
>
> >
>
> > Asiasoft Online Pte Ltd
>
> >
>
> > Tampines Central 1 #04-01 Tampines Plaza
>
> >
>
> > Singapore 529541
>
> >
>
> > Republic of Singapore
>
> >
>
> > Mobile: +65-9648-9798
>
> >
>
> > MSN: teoenming@hotmail.com
>
> >
>
> >
>
> >
>
> > -----Original Message-----
>
> >
>
> > From: xen-devel-bounces@lists.xensource.com
>
> >
>
> > [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi
>
> > Kärkkäinen
>
> >
>
> > Sent: Monday, July 27, 2009 11:24 PM
>
> >
>
> > To: Teo En Ming
>
> >
>
> > Cc: Boris Derzhavets; xen-devel@lists.xensource.com
>
> >
>
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
>
> > Jeremy's PVOPS
>
> >
>
> > Kernel
>
> >
>
> >
>
> >
>
> > On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
>
> >
>
> > > Dear Pasi,
>
> >
>
> > >
>
> >
>
> > > Any idea on what benchmark tools I can use to measure I/O
>
> > performance of
>
> >
>
> > my
>
> >
>
> > > virtual machines?
>
> >
>
> > >
>
> >
>
> >
>
> >
>
> > Well for simple streaming IO tests you can use dd, it supports
>
> > multiple
>
> >
>
> > block sizes, O_DIRECT etc.
>
> >
>
> >
>
> >
>
> > If you need multithreaded/multiprocess tests, or filesystem IO
>
> > tests, then
>
> >
>
> > you need something more sophisticated.. bonnie++, ltp disktest,
>
> > fio, iozone
>
> >
>
> > etc. Google is your friend.
>
> >
>
> >
>
> >
>
> > -- Pasi
>
> >
>
> >
>
> >
>
> > > Thank you.
>
> >
>
> > >
>
> >
>
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
>
> >
>
> > > BEng(Hons)(Mechanical Engineering)
>
> >
>
> > >
>
> >
>
> > > Technical Support Engineer
>
> >
>
> > >
>
> >
>
> > > Information Technology Department
>
> >
>
> > >
>
> >
>
> > > Asiasoft Online Pte Ltd
>
> >
>
> > >
>
> >
>
> > > Tampines Central 1 #04-01 Tampines Plaza
>
> >
>
> > >
>
> >
>
> > > Singapore 529541
>
> >
>
> > >
>
> >
>
> > > Republic of Singapore
>
> >
>
> > >
>
> >
>
> > > Mobile Phone: +65-9648-9798
>
> >
>
> > >
>
> >
>
> > > MSN: teoenming@hotmail.com
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > -----Original Message-----
>
> >
>
> > >
>
> >
>
> > > From: Pasi Kärkkäinen <pasik@iki.fi>
>
> >
>
> > >
>
> >
>
> > > To: Teo En Ming <enming.teo@asiasoftsea.net>
>
> >
>
> > >
>
> >
>
> > > Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
>
> >
>
> > xen-devel@lists.xensource.com
>
> >
>
> > >
>
> >
>
> > > Date: Mon, 27 Jul 2009 18:01:55 +0300
>
> >
>
> > >
>
> >
>
> > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
>
> > Jeremy's PVOPS
>
> >
>
> > > Kernel
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
>
> >
>
> > >
>
> >
>
> > > > Dear Boris,
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > > Based on your given information, I have managed to
>
> > configure static IP
>
> >
>
> > >
>
> >
>
> > > > address inside OpenSolaris UNIX PV guest.
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > > These are the two crucial lines:
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
>
> > /etc/hostname.xnf0
>
> >
>
> > >
>
> >
>
> > > > echo 192.168.1.102 > /etc/defaultrouter
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > > Please see screenshot here:
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> >
>
> >
>
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
> [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1]
>
>
>
> >
>
> [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
>
> 1]
>
> >
>
> >
>
> > 600-h/03.jpeg
>
> >
>
> > >
>
> >
>
> >
>
> >
>
> [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
>
>
>
> >
>
> [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
>
> ]
>
> >
>
> >
>
> > 1600-h/03.jpeg]
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > > > May I know whether there are any PV device drivers for
>
> > me to install to
>
> >
>
> > >
>
> >
>
> > > > improve PV guests' performance? What are the
>
> > recommended benchmark tools
>
> >
>
> >
>
> >
>
> > > to
>
> >
>
> > >
>
> >
>
> > > > measure I/O performance of PV guests?
>
> >
>
> > >
>
> >
>
> > > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > PV guest doesn't need any additional drivers. Like the name
>
> > PV says, it's
>
> >
>
> > >
>
> >
>
> > > paravirtual, and uses the optimized drivers/interfaces
>
> > out-of-the-box.
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > -- Pasi
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > >
>
> >
>
> > > _______________________________________________
>
> >
>
> > >
>
> >
>
> > > Xen-devel mailing list
>
> >
>
> > >
>
> >
>
> > > Xen-devel@lists.xensource.com
>
> >
>
> > >
>
> >
>
> > > http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]
>
> > [http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]]
>
> >
>
> > [http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]
>
> > [http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]]]
>
> >
>
> >
>
> >
>
> > _______________________________________________
>
> >
>
> > Xen-devel mailing list
>
> >
>
> > Xen-devel@lists.xensource.com
>
> >
>
> > http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]
>
> [http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]]
>
> >
>
> >
>
> >
>
> > No virus found in this incoming message.
>
> >
>
> > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> [http://www.avg.com/]]
>
> >
>
> > Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date:
>
> > 07/26/09
>
> >
>
> > 17:59:00
>
> >
>
> >
>
> >
>
> > No virus found in this outgoing message.
>
> >
>
> > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> [http://www.avg.com/]]
>
> >
>
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
>
> > 07/27/09
>
> >
>
> > 17:59:00
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > _______________________________________________
>
> >
>
> > Xen-devel mailing list
>
> >
>
> > Xen-devel@lists.xensource.com
>
> >
>
> > http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]
>
> [http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]]
>
> >
>
> >
>
> >
>
> > No virus found in this incoming message.
>
> >
>
> > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> [http://www.avg.com/]]
>
> >
>
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
>
> > 07/27/09
>
> >
>
> > 17:59:00
>
> >
>
> >
>
> >
>
> > No virus found in this outgoing message.
>
> >
>
> > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> [http://www.avg.com/]]
>
> >
>
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
>
> > 07/27/09
>
> >
>
> > 17:59:00
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > _______________________________________________
>
> >
>
> > Xen-devel mailing list
>
> >
>
> > Xen-devel@lists.xensource.com
>
> >
>
> > http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]
>
> [http://lists.xensource.com/xen-devel
> [http://lists.xensource.com/xen-devel]]
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
>
>
>
> No virus found in this incoming message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/]
>
> Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
>
> 17:59:00
>
>
>
> No virus found in this outgoing message.
>
> Checked by AVG - www.avg.com [http://www.avg.com/]
>
> Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
>
> 17:59:00
>
>
>
>
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@lists.xensource.com
>
> http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 40336 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-28 13:49 Boris Derzhavets
@ 2009-07-28 14:24 ` Pasi Kärkkäinen
0 siblings, 0 replies; 86+ messages in thread
From: Pasi Kärkkäinen @ 2009-07-28 14:24 UTC (permalink / raw)
To: Boris Derzhavets; +Cc: xen-devel, Teo En Ming
On Tue, Jul 28, 2009 at 06:49:49AM -0700, Boris Derzhavets wrote:
> >Xen supports PCI device passthrough to paravirtualized domUs without any
> > additional hardware support/requirements.
>
> It was never my concern. But , i guess it works for SCSI drives , not SATA.
>
Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
You use it to passthrough SCSI or SATA _controller_ (HBA). Or a NIC.
Or a USB controller. Or a graphics card.
-- Pasi
> Boris.
>
> --- On Tue, 7/28/09, Pasi Kärkkäinen <pasik@iki.fi> wrote:
>
> From: Pasi Kärkkäinen <pasik@iki.fi>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
> To: "Teo En Ming" <enming.teo@asiasoftsea.net>
> Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
> Date: Tuesday, July 28, 2009, 8:48 AM
>
> On Tue, Jul 28, 2009 at 08:27:35PM +0800, Teo En Ming wrote:
> > Dear Pasi,
> >
> > I thought only paravirtualized guests allow PCI devices to be passed through
> > from the Dom 0 host? Fully virtualized guests like Windows are not able to
> > access PCI devices directly in Dom 0.
> >
>
> Xen supports PCI device passthrough to paravirtualized domUs without any
> additional hardware support/requirements.
>
> PCI device passthrough to HVM domains requires VT-d (iommu) support.
>
> > Does Core 2 Duo support Intel VT-d? Or only in Xeons?
> >
>
> VT-d support is in the chipset. Not many chipsets have it yet.. And there
> are bugs in the VT-d support in many motherboards..
>
> > I am using Xen 3.4.1 testing code right now. Does it support PCI device pass
> > through?
> >
>
> Yes, I think Xen 3.4.1 has VT-d support. Although the code is still not very
> mature, especially with graphics cards there are a lot of problems.
>
> See xen-devel and xen-users archives for more information.
>
> -- Pasi
>
> > Thank you.
> >
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > BEng(Hons)(Mechanical Engineering)
> >
> > Technical Support Engineer
> >
> > Information Technology Department
> >
> > Asiasoft Online Pte Ltd
> >
> > Tampines Central 1 #04-01 Tampines Plaza
> >
> > Singapore 529541
> >
> > Republic of Singapore
> >
> > Mobile Phone: +65-9648-9798
> >
> > MSN: teoenming@hotmail.com
> >
> >
> > -----Original Message-----
> >
> > From: Pasi Kärkkäinen <pasik@iki.fi>
> >
> > To: "'Teo En Ming'" <enming.teo@asiasoftsea.net>
> >
> > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> > xen-devel@lists.xensource.com
> >
> > Date: Tue, 28 Jul 2009 20:32:10 +0800
> >
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> > Kernel
> >
> >
> >
> >
> > On Tue, Jul 28, 2009 at 07:25:58PM +0800, Teo En Ming wrote:
> >
> > > Dear Boris,
> >
> > >
> >
> > > Any way I can change the emulated display driver in Windows HVM guest to a
> >
> >
> >
> > > better one for game playing?
> >
> > >
> >
> >
> >
> > You can't really do that. Qemu (used in Xen HVM domains) only provides basic
> >
> > 2D display adapter, so it's not really suitable for gaming.
> >
> >
> >
> > If you want to experiment with unstable/development code, you could try VT-d
> >
> > to passthrough a graphics adapter (the whole device) to HVM guest.
> >
> >
> >
> > I think there are also some graphics drivers that operate through the
> >
> > network, ie. communicate with dom0 graphics hardware, but I don't have any
> >
> > links to those.
> >
> >
> >
> > Xen is mostly a server virtualization software/solution nowadays..
> >
> >
> >
> > -- Pasi
> >
> >
> >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > Technical Support Engineer
> >
> > >
> >
> > > Information Technology Department
> >
> > >
> >
> > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > Singapore 529541
> >
> > >
> >
> > > Republic of Singapore
> >
> > >
> >
> > > Mobile Phone: +65-9648-9798
> >
> > >
> >
> > > MSN: teoenming@hotmail.com
> >
> > >
> >
> > >
> >
> > > -----Original Message-----
> >
> > >
> >
> > > From: Boris Derzhavets <bderzhavets@yahoo.com>
> >
> > >
> >
> > > To: enming.teo@asiasoftsea.net, pasik@iki.fi
> >
> > >
> >
> > > Cc: xen-devel@lists.xensource.com
> >
> > >
> >
> > > Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
> >
> > >
> >
> > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> >
> > > Kernel
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > It's really exciting ;)
> >
> > >
> >
> > > Boris.
> >
> > >
> >
> > > --- On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
> >
> > >
> >
> > > From: Teo En Ming <enming.teo@asiasoftsea.net>
> >
> > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> >
> > > Kernel
> >
> > > To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>,
> >
> > pasik@iki.fi
> >
> > > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> >
> > > xen-devel@lists.xensource.com
> >
> > > Date: Tuesday, July 28, 2009, 7:07 AM
> >
> > >
> >
> > >
> >
> > > Hi,
> >
> > >
> >
> > >
> >
> > >
> >
> > > I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0 Kernel
> >
> > > 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
> >
> > >
> >
> > >
> >
> > >
> >
> > > Please see screenshots here:
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
> > [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v]
> >
> > irtual-machine-on.html
> >
> > >
> >
> > >
> >
> > >
> >
> > > Can I change the emulated display adapter driver in Windows XP HVM
> >
> > > guest under Xen to a better one so that I can play games?
> >
> > >
> >
> > >
> >
> > >
> >
> > > Thank you!!!
> >
> > >
> >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > Technical Support Engineer
> >
> > >
> >
> > > Information Technology Department
> >
> > >
> >
> > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > Singapore 529541
> >
> > >
> >
> > > Republic of Singapore
> >
> > >
> >
> > > Mobile Phone: +65-9648-9798
> >
> > >
> >
> > > MSN: teoenming@hotmail.com
> >
> > >
> >
> > >
> >
> > >
> >
> > > -----Original
> >
> > > Message-----
> >
> > >
> >
> > > From: "Teo En Ming (Zhang Enming)"
> >
> > > <enming.teo@asiasoftsea.net>
> >
> > >
> >
> > > To: <pasik@iki.fi>
> >
> > >
> >
> > > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> >
> > > xen-devel@lists.xensource.com
> >
> > >
> >
> > > Date: Tue, 28 Jul 2009 19:13:34 +0800
> >
> > >
> >
> > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> >
> > > PVOPS Kernel
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > Dear All,
> >
> > >
> >
> > >
> >
> > >
> >
> > > I have managed to virtualize Windows 7 32-bit as a HVM guest on
> >
> > > Xen 3.4.1
> >
> > >
> >
> > > RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> >
> > > operating
> >
> > >
> >
> > > system.
> >
> > >
> >
> > >
> >
> > >
> >
> > > Please see screenshots here:
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
> > [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi]
> >
> >
> >
> > >
> >
> > [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v]
> >
> > i]
> >
> > >
> >
> > >
> >
> > > rtual-machine-on-xen.html
> >
> > >
> >
> > >
> >
> > >
> >
> > > I have uploaded 24 pictures so far at the time of this writing.
> >
> > >
> >
> > >
> >
> > >
> >
> > > Regards,
> >
> > >
> >
> > >
> >
> > >
> >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > >
> >
> > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > Technical Support Engineer
> >
> > >
> >
> > > Information Technology Department
> >
> > >
> >
> > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > Singapore 529541
> >
> > >
> >
> > > Republic of Singapore
> >
> > >
> >
> > > Mobile: +65-9648-9798
> >
> > >
> >
> > > MSN: teoenming@hotmail.com
> >
> > >
> >
> > >
> >
> > >
> >
> > > -----Original Message-----
> >
> > >
> >
> > > From: xen-devel-bounces@lists.xensource.com
> >
> > >
> >
> > > [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi
> >
> > > Kärkkäinen
> >
> > >
> >
> > > Sent: Monday, July 27, 2009 11:24 PM
> >
> > >
> >
> > > To: Teo En Ming
> >
> > >
> >
> > > Cc: Boris Derzhavets; xen-devel@lists.xensource.com
> >
> > >
> >
> > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> >
> > > Jeremy's PVOPS
> >
> > >
> >
> > > Kernel
> >
> > >
> >
> > >
> >
> > >
> >
> > > On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
> >
> > >
> >
> > > > Dear Pasi,
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Any idea on what benchmark tools I can use to measure I/O
> >
> > > performance of
> >
> > >
> >
> > > my
> >
> > >
> >
> > > > virtual machines?
> >
> > >
> >
> > > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > Well for simple streaming IO tests you can use dd, it supports
> >
> > > multiple
> >
> > >
> >
> > > block sizes, O_DIRECT etc.
> >
> > >
> >
> > >
> >
> > >
> >
> > > If you need multithreaded/multiprocess tests, or filesystem IO
> >
> > > tests, then
> >
> > >
> >
> > > you need something more sophisticated.. bonnie++, ltp disktest,
> >
> > > fio, iozone
> >
> > >
> >
> > > etc. Google is your friend.
> >
> > >
> >
> > >
> >
> > >
> >
> > > -- Pasi
> >
> > >
> >
> > >
> >
> > >
> >
> > > > Thank you.
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > >
> >
> > > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Technical Support Engineer
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Information Technology Department
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Singapore 529541
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Republic of Singapore
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Mobile Phone: +65-9648-9798
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > MSN: teoenming@hotmail.com
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > -----Original Message-----
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > From: Pasi Kärkkäinen <pasik@iki.fi>
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > To: Teo En Ming <enming.teo@asiasoftsea.net>
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
> >
> > >
> >
> > > xen-devel@lists.xensource.com
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Date: Mon, 27 Jul 2009 18:01:55 +0300
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> >
> > > Jeremy's PVOPS
> >
> > >
> >
> > > > Kernel
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > Dear Boris,
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > Based on your given information, I have managed to
> >
> > > configure static IP
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > address inside OpenSolaris UNIX PV guest.
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > These are the two crucial lines:
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
> >
> > > /etc/hostname.xnf0
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > echo 192.168.1.102 > /etc/defaultrouter
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > Please see screenshot here:
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > >
> >
> > >
> >
> > http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1]
> >
> >
> >
> > >
> >
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
> >
> > 1]
> >
> > >
> >
> > >
> >
> > > 600-h/03.jpeg
> >
> > >
> >
> > > >
> >
> > >
> >
> > >
> >
> > >
> >
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
> >
> >
> >
> > >
> >
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
> >
> > ]
> >
> > >
> >
> > >
> >
> > > 1600-h/03.jpeg]
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > May I know whether there are any PV device drivers for
> >
> > > me to install to
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > improve PV guests' performance? What are the
> >
> > > recommended benchmark tools
> >
> > >
> >
> > >
> >
> > >
> >
> > > > to
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > measure I/O performance of PV guests?
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > PV guest doesn't need any additional drivers. Like the name
> >
> > > PV says, it's
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > paravirtual, and uses the optimized drivers/interfaces
> >
> > > out-of-the-box.
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > -- Pasi
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > _______________________________________________
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Xen-devel mailing list
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Xen-devel@lists.xensource.com
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> > >
> >
> > > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]]
> >
> > >
> >
> > >
> >
> > >
> >
> > > _______________________________________________
> >
> > >
> >
> > > Xen-devel mailing list
> >
> > >
> >
> > > Xen-devel@lists.xensource.com
> >
> > >
> >
> > > http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this incoming message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> > [http://www.avg.com/]]
> >
> > >
> >
> > > Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/26/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this outgoing message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> > [http://www.avg.com/]]
> >
> > >
> >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/27/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > _______________________________________________
> >
> > >
> >
> > > Xen-devel mailing list
> >
> > >
> >
> > > Xen-devel@lists.xensource.com
> >
> > >
> >
> > > http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this incoming message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> > [http://www.avg.com/]]
> >
> > >
> >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/27/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this outgoing message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> > [http://www.avg.com/]]
> >
> > >
> >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/27/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > _______________________________________________
> >
> > >
> >
> > > Xen-devel mailing list
> >
> > >
> >
> > > Xen-devel@lists.xensource.com
> >
> > >
> >
> > > http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> >
> >
> > _______________________________________________
> >
> > Xen-devel mailing list
> >
> > Xen-devel@lists.xensource.com
> >
> > http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
> >
> >
> >
> > No virus found in this incoming message.
> >
> > Checked by AVG - www.avg.com [http://www.avg.com/]
> >
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
> >
> > 17:59:00
> >
> >
> >
> > No virus found in this outgoing message.
> >
> > Checked by AVG - www.avg.com [http://www.avg.com/]
> >
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
> >
> > 17:59:00
> >
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> >
> > Xen-devel mailing list
> >
> > Xen-devel@lists.xensource.com
> >
> > http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
>
>
>
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-28 15:10 Boris Derzhavets
0 siblings, 0 replies; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-28 15:10 UTC (permalink / raw)
To: Pasi Kärkkäinen; +Cc: xen-devel, Teo En Ming
[-- Attachment #1.1: Type: text/plain, Size: 23918 bytes --]
>Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
>You use it to passthrough SCSI or SATA _controller_ (HBA).
Pasi,
I understand that . South Bridge ICH9(10)R is located PCI Bus.
"lspci -v" gives me :-
00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 8277
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 4347
I/O ports at 9c00 [size=8]
I/O ports at 9880 [size=4]
I/O ports at 9800 [size=8]
I/O ports at 9480 [size=4]
I/O ports at 9400 [size=32]
Memory at f9ffe800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Mask- 64bit- Count=1/16 Enable+
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA <?>
Capabilities: [b0] Vendor Specific Information <?>
Kernel driver in use: ahci
How to manage afterwards ? Link would be fine.
Thanks.
Boris.
--- On Tue, 7/28/09, Pasi Kärkkäinen <pasik@iki.fi> wrote:
From: Pasi Kärkkäinen <pasik@iki.fi>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>
Cc: xen-devel@lists.xensource.com, "Teo En Ming" <enming.teo@asiasoftsea.net>
Date: Tuesday, July 28, 2009, 10:24 AM
On Tue, Jul 28, 2009 at 06:49:49AM -0700, Boris Derzhavets wrote:
> >Xen supports PCI device passthrough to paravirtualized domUs without any
> > additional hardware support/requirements.
>
> It was never my concern. But , i guess it works for SCSI drives , not SATA.
>
Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
You use it to passthrough SCSI or SATA _controller_ (HBA). Or a NIC.
Or a USB controller. Or a graphics card.
-- Pasi
> Boris.
>
> --- On Tue, 7/28/09, Pasi Kärkkäinen <pasik@iki.fi> wrote:
>
> From: Pasi Kärkkäinen <pasik@iki.fi>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
> To: "Teo En Ming" <enming.teo@asiasoftsea.net>
> Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>, xen-devel@lists.xensource.com
> Date: Tuesday, July 28, 2009, 8:48 AM
>
> On Tue, Jul 28, 2009 at 08:27:35PM +0800, Teo En Ming wrote:
> > Dear Pasi,
> >
> > I thought only paravirtualized guests allow PCI devices to be passed through
> > from the Dom 0 host? Fully virtualized guests like Windows are not able to
> > access PCI devices directly in Dom 0.
> >
>
> Xen supports PCI device passthrough to paravirtualized domUs without any
> additional hardware support/requirements.
>
> PCI device passthrough to HVM domains requires VT-d (iommu) support.
>
> > Does Core 2 Duo support Intel VT-d? Or only in Xeons?
> >
>
> VT-d support is in the chipset. Not many chipsets have it yet.. And there
> are bugs in the VT-d support in many motherboards..
>
> > I am using Xen 3.4.1 testing code right now. Does it support PCI device pass
> > through?
> >
>
> Yes, I think Xen 3.4.1 has VT-d support. Although the code is still not very
> mature, especially with graphics cards there are a lot of problems.
>
> See xen-devel and xen-users archives for more information.
>
> -- Pasi
>
> > Thank you.
> >
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > BEng(Hons)(Mechanical Engineering)
> >
> > Technical Support Engineer
> >
> > Information Technology Department
> >
> > Asiasoft Online Pte Ltd
> >
> > Tampines Central 1 #04-01 Tampines Plaza
> >
> > Singapore 529541
> >
> > Republic of Singapore
> >
> > Mobile Phone: +65-9648-9798
> >
> > MSN: teoenming@hotmail.com
> >
> >
> > -----Original Message-----
> >
> > From: Pasi Kärkkäinen <pasik@iki.fi>
> >
> > To: "'Teo En Ming'" <enming.teo@asiasoftsea.net>
> >
> > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> > xen-devel@lists.xensource.com
> >
> > Date: Tue, 28 Jul 2009 20:32:10 +0800
> >
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> > Kernel
> >
> >
> >
> >
> > On Tue, Jul 28, 2009 at 07:25:58PM +0800, Teo En Ming wrote:
> >
> > > Dear Boris,
> >
> > >
> >
> > > Any way I can change the emulated display driver in Windows HVM guest to a
> >
> >
> >
> > > better one for game playing?
> >
> > >
> >
> >
> >
> > You can't really do that. Qemu (used in Xen HVM domains) only provides basic
> >
> > 2D display adapter, so it's not really suitable for gaming.
> >
> >
> >
> > If you want to experiment with unstable/development code, you could try VT-d
> >
> > to passthrough a graphics adapter (the whole device) to HVM guest.
> >
> >
> >
> > I think there are also some graphics drivers that operate through the
> >
> > network, ie. communicate with dom0 graphics hardware, but I don't have any
> >
> > links to those.
> >
> >
> >
> > Xen is mostly a server virtualization software/solution nowadays..
> >
> >
> >
> > -- Pasi
> >
> >
> >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > Technical Support Engineer
> >
> > >
> >
> > > Information Technology Department
> >
> > >
> >
> > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > Singapore 529541
> >
> > >
> >
> > > Republic of Singapore
> >
> > >
> >
> > > Mobile Phone: +65-9648-9798
> >
> > >
> >
> > > MSN: teoenming@hotmail.com
> >
> > >
> >
> > >
> >
> > > -----Original Message-----
> >
> > >
> >
> > > From: Boris Derzhavets <bderzhavets@yahoo.com>
> >
> > >
> >
> > > To: enming.teo@asiasoftsea.net, pasik@iki.fi
> >
> > >
> >
> > > Cc: xen-devel@lists.xensource.com
> >
> > >
> >
> > > Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
> >
> > >
> >
> > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> >
> > > Kernel
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > It's really exciting ;)
> >
> > >
> >
> > > Boris.
> >
> > >
> >
> > > --- On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
> >
> > >
> >
> > > From: Teo En Ming <enming.teo@asiasoftsea.net>
> >
> > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> >
> > > Kernel
> >
> > > To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>,
> >
> > pasik@iki.fi
> >
> > > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> >
> > > xen-devel@lists.xensource.com
> >
> > > Date: Tuesday, July 28, 2009, 7:07 AM
> >
> > >
> >
> > >
> >
> > > Hi,
> >
> > >
> >
> > >
> >
> > >
> >
> > > I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0 Kernel
> >
> > > 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
> >
> > >
> >
> > >
> >
> > >
> >
> > > Please see screenshots here:
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
> > [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v]
> >
> > irtual-machine-on.html
> >
> > >
> >
> > >
> >
> > >
> >
> > > Can I change the emulated display adapter driver in Windows XP HVM
> >
> > > guest under Xen to a better one so that I can play games?
> >
> > >
> >
> > >
> >
> > >
> >
> > > Thank you!!!
> >
> > >
> >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > Technical Support Engineer
> >
> > >
> >
> > > Information Technology Department
> >
> > >
> >
> > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > Singapore 529541
> >
> > >
> >
> > > Republic of Singapore
> >
> > >
> >
> > > Mobile Phone: +65-9648-9798
> >
> > >
> >
> > > MSN: teoenming@hotmail.com
> >
> > >
> >
> > >
> >
> > >
> >
> > > -----Original
> >
> > > Message-----
> >
> > >
> >
> > > From: "Teo En Ming (Zhang Enming)"
> >
> > > <enming.teo@asiasoftsea.net>
> >
> > >
> >
> > > To: <pasik@iki.fi>
> >
> > >
> >
> > > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> >
> > > xen-devel@lists.xensource.com
> >
> > >
> >
> > > Date: Tue, 28 Jul 2009 19:13:34 +0800
> >
> > >
> >
> > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> >
> > > PVOPS Kernel
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > Dear All,
> >
> > >
> >
> > >
> >
> > >
> >
> > > I have managed to virtualize Windows 7 32-bit as a HVM guest on
> >
> > > Xen 3.4.1
> >
> > >
> >
> > > RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> >
> > > operating
> >
> > >
> >
> > > system.
> >
> > >
> >
> > >
> >
> > >
> >
> > > Please see screenshots here:
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
> > [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi]
> >
> >
> >
> > >
> >
> > [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > [http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v]
> >
> > i]
> >
> > >
> >
> > >
> >
> > > rtual-machine-on-xen.html
> >
> > >
> >
> > >
> >
> > >
> >
> > > I have uploaded 24 pictures so far at the time of this writing.
> >
> > >
> >
> > >
> >
> > >
> >
> > > Regards,
> >
> > >
> >
> > >
> >
> > >
> >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > >
> >
> > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > Technical Support Engineer
> >
> > >
> >
> > > Information Technology Department
> >
> > >
> >
> > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > Singapore 529541
> >
> > >
> >
> > > Republic of Singapore
> >
> > >
> >
> > > Mobile: +65-9648-9798
> >
> > >
> >
> > > MSN: teoenming@hotmail.com
> >
> > >
> >
> > >
> >
> > >
> >
> > > -----Original Message-----
> >
> > >
> >
> > > From: xen-devel-bounces@lists.xensource.com
> >
> > >
> >
> > > [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi
> >
> > > Kärkkäinen
> >
> > >
> >
> > > Sent: Monday, July 27, 2009 11:24 PM
> >
> > >
> >
> > > To: Teo En Ming
> >
> > >
> >
> > > Cc: Boris Derzhavets; xen-devel@lists.xensource.com
> >
> > >
> >
> > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> >
> > > Jeremy's PVOPS
> >
> > >
> >
> > > Kernel
> >
> > >
> >
> > >
> >
> > >
> >
> > > On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
> >
> > >
> >
> > > > Dear Pasi,
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Any idea on what benchmark tools I can use to measure I/O
> >
> > > performance of
> >
> > >
> >
> > > my
> >
> > >
> >
> > > > virtual machines?
> >
> > >
> >
> > > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > Well for simple streaming IO tests you can use dd, it supports
> >
> > > multiple
> >
> > >
> >
> > > block sizes, O_DIRECT etc.
> >
> > >
> >
> > >
> >
> > >
> >
> > > If you need multithreaded/multiprocess tests, or filesystem IO
> >
> > > tests, then
> >
> > >
> >
> > > you need something more sophisticated.. bonnie++, ltp disktest,
> >
> > > fio, iozone
> >
> > >
> >
> > > etc. Google is your friend.
> >
> > >
> >
> > >
> >
> > >
> >
> > > -- Pasi
> >
> > >
> >
> > >
> >
> > >
> >
> > > > Thank you.
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > >
> >
> > > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Technical Support Engineer
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Information Technology Department
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Singapore 529541
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Republic of Singapore
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Mobile Phone: +65-9648-9798
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > MSN: teoenming@hotmail.com
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > -----Original Message-----
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > From: Pasi Kärkkäinen <pasik@iki.fi>
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > To: Teo En Ming <enming.teo@asiasoftsea.net>
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
> >
> > >
> >
> > > xen-devel@lists.xensource.com
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Date: Mon, 27 Jul 2009 18:01:55 +0300
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> >
> > > Jeremy's PVOPS
> >
> > >
> >
> > > > Kernel
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > Dear Boris,
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > Based on your given information, I have managed to
> >
> > > configure static IP
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > address inside OpenSolaris UNIX PV guest.
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > These are the two crucial lines:
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
> >
> > > /etc/hostname.xnf0
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > echo 192.168.1.102 > /etc/defaultrouter
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > Please see screenshot here:
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > >
> >
> > >
> >
> > http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1]
> >
> >
> >
> > >
> >
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
> >
> > 1]
> >
> > >
> >
> > >
> >
> > > 600-h/03.jpeg
> >
> > >
> >
> > > >
> >
> > >
> >
> > >
> >
> > >
> >
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
> >
> >
> >
> > >
> >
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > [http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
> >
> > ]
> >
> > >
> >
> > >
> >
> > > 1600-h/03.jpeg]
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > May I know whether there are any PV device drivers for
> >
> > > me to install to
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > improve PV guests' performance? What are the
> >
> > > recommended benchmark tools
> >
> > >
> >
> > >
> >
> > >
> >
> > > > to
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > measure I/O performance of PV guests?
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > PV guest doesn't need any additional drivers. Like the name
> >
> > > PV says, it's
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > paravirtual, and uses the optimized drivers/interfaces
> >
> > > out-of-the-box.
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > -- Pasi
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > _______________________________________________
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Xen-devel mailing list
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Xen-devel@lists.xensource.com
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> > >
> >
> > > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]]
> >
> > >
> >
> > >
> >
> > >
> >
> > > _______________________________________________
> >
> > >
> >
> > > Xen-devel mailing list
> >
> > >
> >
> > > Xen-devel@lists.xensource.com
> >
> > >
> >
> > > http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this incoming message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> > [http://www.avg.com/]]
> >
> > >
> >
> > > Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/26/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this outgoing message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> > [http://www.avg.com/]]
> >
> > >
> >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/27/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > _______________________________________________
> >
> > >
> >
> > > Xen-devel mailing list
> >
> > >
> >
> > > Xen-devel@lists.xensource.com
> >
> > >
> >
> > > http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this incoming message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> > [http://www.avg.com/]]
> >
> > >
> >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/27/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this outgoing message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/] [http://www.avg.com/
> > [http://www.avg.com/]]
> >
> > >
> >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/27/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > _______________________________________________
> >
> > >
> >
> > > Xen-devel mailing list
> >
> > >
> >
> > > Xen-devel@lists.xensource.com
> >
> > >
> >
> > > http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> >
> >
> > _______________________________________________
> >
> > Xen-devel mailing list
> >
> > Xen-devel@lists.xensource.com
> >
> > http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
> >
> >
> >
> > No virus found in this incoming message.
> >
> > Checked by AVG - www.avg.com [http://www.avg.com/]
> >
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
> >
> > 17:59:00
> >
> >
> >
> > No virus found in this outgoing message.
> >
> > Checked by AVG - www.avg.com [http://www.avg.com/]
> >
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date: 07/27/09
> >
> > 17:59:00
> >
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> >
> > Xen-devel mailing list
> >
> > Xen-devel@lists.xensource.com
> >
> > http://lists.xensource.com/xen-devel [http://lists.xensource.com/xen-devel]
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
>
>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 54234 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-29 4:25 Boris Derzhavets
@ 2009-07-29 4:19 ` Teo En Ming
2009-07-29 13:07 ` Teo En Ming (Zhang Enming)
0 siblings, 1 reply; 86+ messages in thread
From: Teo En Ming @ 2009-07-29 4:19 UTC (permalink / raw)
To: Boris Derzhavets, 'Pasi Kärkkäinen'; +Cc: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 36482 bytes --]
Dear All,
I have also virtualized Windows Server 2003 Standard Edition 32-bit on Xen
3.4.1 RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
operating system.
Please see screenshots here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-server-2003-standard-edition.html
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Boris Derzhavets" <bderzhavets@yahoo.com>
To: 'Pasi Kärkkäinen' <pasik@iki.fi>
Cc: <xen-devel@lists.xensource.com>, "'Teo En Ming'"
<enming.teo@asiasoftsea.net>
Date: Wed, 29 Jul 2009 12:25:42 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
>Uhm? You can't use PCI device passthrough for
SCSI or SATA drives?
>You use it to passthrough SCSI or SATA _controller_ (HBA).
Pasi,
I understand that . South Bridge ICH9(10)R is located PCI Bus.
"lspci -v" gives me :-
00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
port
SATA AHCI Controller (rev 02) (prog-if 01 [AHCI
1.0])
Subsystem: ASUSTeK Computer Inc.
Device
8277
Flags: bus master, 66MHz, medium
devsel, latency 0, IRQ
4347
I/O ports at 9c00
[size=8]
I/O ports at 9880
[size=4]
I/O ports at 9800
[size=8]
I/O ports at 9480
[size=4]
I/O ports at 9400
[size=32]
Memory at f9ffe800 (32-bit,
non-prefetchable)
[size=2K]
Capabilities: [80] MSI: Mask-
64bit- Count=1/16
Enable+
Capabilities: [70] Power
Management version
3
Capabilities: [a8] SATA HBA
<?>
Capabilities: [b0] Vendor Specific
Information
<?>
Kernel driver in use:
ahci
How to manage afterwards ? Link would be fine.
Thanks.
Boris.
--- On Tue, 7/28/09, Pasi Kärkkäinen <pasik@iki.fi> wrote:
From: Pasi Kärkkäinen <pasik@iki.fi>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>
Cc: xen-devel@lists.xensource.com, "Teo En Ming"
<enming.teo@asiasoftsea.net>
Date: Tuesday, July 28, 2009, 10:24 AM
On Tue, Jul 28, 2009 at 06:49:49AM -0700, Boris
Derzhavets wrote:
> >Xen supports PCI device passthrough to paravirtualized domUs without
any
> > additional hardware support/requirements.
>
> It was never my concern. But , i guess it works for SCSI drives , not
SATA.
>
Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
You use it to passthrough SCSI or SATA _controller_ (HBA). Or a NIC.
Or a USB controller. Or a graphics card.
-- Pasi
> Boris.
>
> --- On Tue, 7/28/09, Pasi Kärkkäinen <pasik@iki.fi
[https://mail.asiasoftsea.net/mc/compose?to=pasik@iki.fi]>
wrote:
>
> From: Pasi Kärkkäinen <pasik@iki.fi
[https://mail.asiasoftsea.net/mc/compose?to=pasik@iki.fi]>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
> To: "Teo En Ming" <enming.teo@asiasoftsea.net
[https://mail.asiasoftsea.net/mc/compose?to=enming.teo@asiasoftsea.net]>
> Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com
[https://mail.asiasoftsea.net/mc/compose?to=bderzhavets@yahoo.com]>,
xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=xen-devel@lists.xensource.com]
> Date: Tuesday, July 28, 2009, 8:48 AM
>
> On Tue, Jul 28, 2009 at 08:27:35PM +0800, Teo En Ming wrote:
> > Dear Pasi,
> >
> > I thought only paravirtualized guests allow PCI devices to be
passed through
> > from the Dom 0 host? Fully virtualized guests like Windows are not
able to
> > access PCI devices directly in Dom 0.
> >
>
> Xen supports PCI device passthrough to paravirtualized domUs without any
> additional hardware support/requirements.
>
> PCI device passthrough to HVM domains requires VT-d (iommu) support.
>
> > Does Core 2 Duo support Intel VT-d? Or only in Xeons?
> >
>
> VT-d support is in the chipset. Not many chipsets have it yet.. And
there
> are bugs in the VT-d support in many motherboards..
>
> > I am using Xen 3.4.1 testing code right now. Does it support PCI
device pass
> > through?
> >
>
> Yes, I think Xen 3.4.1 has VT-d support. Although the code is still not
very
> mature, especially with graphics cards there are a lot of problems.
>
> See xen-devel and xen-users archives for more information.
>
> -- Pasi
>
> > Thank you.
> >
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > BEng(Hons)(Mechanical Engineering)
> >
> > Technical Support Engineer
> >
> > Information Technology Department
> >
> > Asiasoft Online Pte Ltd
> >
> > Tampines Central 1 #04-01 Tampines Plaza
> >
> > Singapore
529541
> >
> > Republic
of Singapore
> >
> > Mobile Phone: +65-9648-9798
> >
> > MSN: teoenming@hotmail.com
[https://mail.asiasoftsea.net/mc/compose?to=teoenming@hotmail.com]
> >
> >
> > -----Original Message-----
> >
> > From: Pasi Kärkkäinen <pasik@iki.fi
[https://mail.asiasoftsea.net/mc/compose?to=pasik@iki.fi]>
> >
> > To: "'Teo En Ming'" <enming.teo@asiasoftsea.net
[https://mail.asiasoftsea.net/mc/compose?to=enming.teo@asiasoftsea.net]>
> >
> > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com
[https://mail.asiasoftsea.net/mc/compose?to=bderzhavets@yahoo.com]>,
> > xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=xen-devel@lists.xensource.com]
> >
> > Date: Tue, 28 Jul 2009 20:32:10 +0800
> >
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS
> > Kernel
> >
> >
> >
> >
> > On Tue, Jul 28, 2009 at 07:25:58PM +0800, Teo En Ming wrote:
> >
> > > Dear Boris,
> >
> > >
> >
> > > Any way I can change the emulated display driver in Windows
HVM guest to a
> >
> >
> >
> > > better one for game playing?
> >
> > >
> >
> >
> >
> > You can't really do that. Qemu (used in Xen HVM domains) only
provides basic
> >
> > 2D display adapter, so it's not really suitable for gaming.
> >
> >
> >
> > If you want to experiment with unstable/development code, you could
try VT-d
> >
> > to passthrough a graphics adapter (the whole device) to HVM guest.
> >
> >
> >
> > I think there are also some graphics drivers that operate through
the
> >
> > network, ie. communicate with dom0 graphics hardware, but I don't
have any
> >
> > links to those.
> >
> >
> >
> > Xen is mostly a server virtualization software/solution nowadays..
> >
> >
> >
> > -- Pasi
> >
> >
> >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > Technical Support Engineer
> >
> > >
> >
> > > Information Technology Department
> >
> > >
> >
> > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > Singapore
529541
> >
> > >
> >
> > > Republic
of Singapore
> >
> > >
> >
> > > Mobile Phone: +65-9648-9798
> >
> > >
> >
> > > MSN: teoenming@hotmail.com
[https://mail.asiasoftsea.net/mc/compose?to=teoenming@hotmail.com]
> >
> > >
> >
> > >
> >
> > > -----Original Message-----
> >
> > >
> >
> > > From: Boris Derzhavets <bderzhavets@yahoo.com
[https://mail.asiasoftsea.net/mc/compose?to=bderzhavets@yahoo.com]>
> >
> > >
> >
> > > To: enming.teo@asiasoftsea.net
[https://mail.asiasoftsea.net/mc/compose?to=enming.teo@asiasoftsea.net],
pasik@iki.fi [https://mail.asiasoftsea.net/mc/compose?to=pasik@iki.fi]
> >
> > >
> >
> > > Cc: xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=xen-devel@lists.xensource.com]
> >
> > >
> >
> > > Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
> >
> > >
> >
> > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS
> >
> > > Kernel
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > It's really exciting ;)
> >
> > >
> >
> > > Boris.
> >
> > >
> >
> > > --- On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net
[https://mail.asiasoftsea.net/mc/compose?to=enming.teo@asiasoftsea.net]>
wrote:
> >
> > >
> >
> > > From: Teo En Ming <enming.teo@asiasoftsea.net
[https://mail.asiasoftsea.net/mc/compose?to=enming.teo@asiasoftsea.net]>
> >
> > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's PVOPS
> >
> > > Kernel
> >
> > > To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net
[https://mail.asiasoftsea.net/mc/compose?to=enming.teo@asiasoftsea.net]>,
> >
> > pasik@iki.fi [https://mail.asiasoftsea.net/mc/compose?to=pasik@iki.fi]
> >
> > > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com
[https://mail.asiasoftsea.net/mc/compose?to=bderzhavets@yahoo.com]>,
> >
> > > xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=xen-devel@lists.xensource.com]
> >
> > > Date: Tuesday, July 28, 2009, 7:07 AM
> >
> > >
> >
> > >
> >
> > > Hi,
> >
> > >
> >
> > >
> >
> > >
> >
> > > I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0
Kernel
> >
> > > 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
> >
> > >
> >
> > >
> >
> > >
> >
> > > Please see screenshots here:
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> >
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v]
> >
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v]]
> >
> > irtual-machine-on.html
> >
> > >
> >
> > >
> >
> > >
> >
> > > Can I change the emulated display adapter driver in Windows XP
HVM
> >
> > > guest under Xen to a better one so that I can play games?
> >
> > >
> >
> > >
> >
> > >
> >
> > > Thank you!!!
> >
> > >
> >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > Technical Support Engineer
> >
> > >
> >
> > > Information Technology Department
> >
> > >
> >
> > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > Singapore
529541
> >
> > >
> >
> > > Republic
of Singapore
> >
> > >
> >
> > > Mobile Phone: +65-9648-9798
> >
> > >
> >
> > > MSN: teoenming@hotmail.com
[https://mail.asiasoftsea.net/mc/compose?to=teoenming@hotmail.com]
> >
> > >
> >
> > >
> >
> > >
> >
> > > -----Original
> >
> > > Message-----
> >
> > >
> >
> > > From: "Teo En Ming (Zhang Enming)"
> >
> > > <enming.teo@asiasoftsea.net
[https://mail.asiasoftsea.net/mc/compose?to=enming.teo@asiasoftsea.net]>
> >
> > >
> >
> > > To: <pasik@iki.fi
[https://mail.asiasoftsea.net/mc/compose?to=pasik@iki.fi]>
> >
> > >
> >
> > > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com
[https://mail.asiasoftsea.net/mc/compose?to=bderzhavets@yahoo.com]>,
> >
> > > xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=xen-devel@lists.xensource.com]
> >
> > >
> >
> > > Date: Tue, 28 Jul 2009 19:13:34 +0800
> >
> > >
> >
> > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0
in Jeremy's
> >
> > > PVOPS Kernel
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > Dear All,
> >
> > >
> >
> > >
> >
> > >
> >
> > > I have managed to virtualize Windows 7 32-bit as a HVM
guest on
> >
> > > Xen 3.4.1
> >
> > >
> >
> > > RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux
32-bit host
> >
> > > operating
> >
> > >
> >
> > > system.
> >
> > >
> >
> > >
> >
> > >
> >
> > > Please see screenshots here:
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> >
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi]
> >
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi]]
> >
> >
> >
> > >
> >
> >
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v]
> >
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v]]
> >
> > i]
> >
> > >
> >
> > >
> >
> > > rtual-machine-on-xen.html
> >
> > >
> >
> > >
> >
> > >
> >
> > > I have uploaded 24 pictures so far at the time of this
writing.
> >
> > >
> >
> > >
> >
> > >
> >
> > > Regards,
> >
> > >
> >
> > >
> >
> > >
> >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering)
> >
> > >
> >
> > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > Technical Support Engineer
> >
> > >
> >
> > > Information Technology Department
> >
> > >
> >
> > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > Singapore 529541
> >
> > >
> >
> > > Republic of Singapore
> >
> > >
> >
> > > Mobile: +65-9648-9798
> >
> > >
> >
> > > MSN: teoenming@hotmail.com
[https://mail.asiasoftsea.net/mc/compose?to=teoenming@hotmail.com]
> >
> > >
> >
> > >
> >
> > >
> >
> > > -----Original Message-----
> >
> > >
> >
> > > From: xen-devel-bounces@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=xen-devel-bounces@lists.xensource.com]
> >
> > >
> >
> > > [mailto:xen-devel-bounces@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=xen-devel-bounces@lists.xensource.com]]
On Behalf Of Pasi
> >
> > > Kärkkäinen
> >
> > >
> >
> > > Sent: Monday, July 27, 2009 11:24 PM
> >
> > >
> >
> > > To: Teo En Ming
> >
> > >
> >
> > > Cc: Boris Derzhavets; xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=xen-devel@lists.xensource.com]
> >
> > >
> >
> > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0
in
> >
> > > Jeremy's PVOPS
> >
> > >
> >
> > > Kernel
> >
> > >
> >
> > >
> >
> > >
> >
> > > On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming
wrote:
> >
> > >
> >
> > > > Dear Pasi,
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Any idea on what benchmark tools I can use to
measure I/O
> >
> > > performance of
> >
> > >
> >
> > > my
> >
> > >
> >
> > > > virtual machines?
> >
> > >
> >
> > > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > Well for simple streaming IO tests you can use dd, it
supports
> >
> > > multiple
> >
> > >
> >
> > > block sizes, O_DIRECT etc.
> >
> > >
> >
> > >
> >
> > >
> >
> > > If you need multithreaded/multiprocess tests, or
filesystem IO
> >
> > > tests, then
> >
> > >
> >
> > > you need something more sophisticated.. bonnie++, ltp
disktest,
> >
> > > fio, iozone
> >
> > >
> >
> > > etc. Google is your friend.
> >
> > >
> >
> > >
> >
> > >
> >
> > > -- Pasi
> >
> > >
> >
> > >
> >
> > >
> >
> > > > Thank you.
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics
Engineering)
> >
> > >
> >
> > > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Technical Support Engineer
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Information Technology Department
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Singapore 529541
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Republic of Singapore
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Mobile Phone: +65-9648-9798
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > MSN: teoenming@hotmail.com
[https://mail.asiasoftsea.net/mc/compose?to=teoenming@hotmail.com]
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > -----Original Message-----
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > From: Pasi Kärkkäinen <pasik@iki.fi
[https://mail.asiasoftsea.net/mc/compose?to=pasik@iki.fi]>
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > To: Teo En Ming <enming.teo@asiasoftsea.net
[https://mail.asiasoftsea.net/mc/compose?to=enming.teo@asiasoftsea.net]>
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Cc: Boris Derzhavets <bderzhavets@yahoo.com
[https://mail.asiasoftsea.net/mc/compose?to=bderzhavets@yahoo.com]>,
> >
> > >
> >
> > > xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=xen-devel@lists.xensource.com]
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Date: Mon, 27 Jul 2009 18:01:55 +0300
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Subject: Re: [Xen-devel] Unable to Configure Xen
Dom 0 in
> >
> > > Jeremy's PVOPS
> >
> > >
> >
> > > > Kernel
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En
Ming wrote:
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > Dear Boris,
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > Based on your given information, I have
managed to
> >
> > > configure static IP
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > address inside OpenSolaris UNIX PV guest.
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > These are the two crucial lines:
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > echo 192.168.1.45 netmask 255.255.255.0 mtu
1492 >
> >
> > > /etc/hostname.xnf0
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > echo 192.168.1.102 > /etc/defaultrouter
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > Please see screenshot here:
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > >
> >
> > >
> >
> >
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1]
> >
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1]]
> >
> >
> >
> > >
> >
> >
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
> >
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]]
> >
> > 1]
> >
> > >
> >
> > >
> >
> > > 600-h/03.jpeg
> >
> > >
> >
> > > >
> >
> > >
> >
> > >
> >
> > >
> >
> >
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
> >
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]]
> >
> >
> >
> > >
> >
> >
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]
> >
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s]]
> >
> > ]
> >
> > >
> >
> > >
> >
> > > 1600-h/03.jpeg]
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > May I know whether there are any PV device
drivers for
> >
> > > me to install to
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > improve PV guests' performance? What are the
> >
> > > recommended benchmark tools
> >
> > >
> >
> > >
> >
> > >
> >
> > > > to
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > measure I/O performance of PV guests?
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > PV guest doesn't need any additional drivers. Like
the name
> >
> > > PV says, it's
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > paravirtual, and uses the optimized
drivers/interfaces
> >
> > > out-of-the-box.
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > -- Pasi
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > _______________________________________________
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Xen-devel mailing list
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=Xen-devel@lists.xensource.com]
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> > [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
> >
> > > [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> > [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]]
> >
> > >
> >
> > > [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> > [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
> >
> > > [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> > [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]]]
> >
> > >
> >
> > >
> >
> > >
> >
> > > _______________________________________________
> >
> > >
> >
> > > Xen-devel mailing list
> >
> > >
> >
> > > Xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=Xen-devel@lists.xensource.com]
> >
> > >
> >
> > > http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> > [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
> >
> > [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> > [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]]
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this incoming message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/
[http://www.avg.com/]] [http://www.avg.com/ [http://www.avg.com/]
> > [http://www.avg.com/ [http://www.avg.com/]]]
> >
> > >
> >
> > > Version: 8.5.339 / Virus Database: 270.13.31/2265 -
Release Date:
> >
> > > 07/26/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this outgoing message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/
[http://www.avg.com/]] [http://www.avg.com/ [http://www.avg.com/]
> > [http://www.avg.com/ [http://www.avg.com/]]]
> >
> > >
> >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 -
Release Date:
> >
> > > 07/27/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > _______________________________________________
> >
> > >
> >
> > > Xen-devel mailing list
> >
> > >
> >
> > > Xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=Xen-devel@lists.xensource.com]
> >
> > >
> >
> > > http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> > [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
> >
> > [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> > [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]]
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this incoming message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/
[http://www.avg.com/]] [http://www.avg.com/ [http://www.avg.com/]
> > [http://www.avg.com/ [http://www.avg.com/]]]
> >
> > >
> >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 -
Release Date:
> >
> > > 07/27/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this outgoing message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/
[http://www.avg.com/]] [http://www.avg.com/ [http://www.avg.com/]
> > [http://www.avg.com/ [http://www.avg.com/]]]
> >
> > >
> >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 -
Release Date:
> >
> > > 07/27/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > _______________________________________________
> >
> > >
> >
> > > Xen-devel mailing list
> >
> > >
> >
> > > Xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=Xen-devel@lists.xensource.com]
> >
> > >
> >
> > > http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> > [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
> >
> > [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> > [http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]]
> >
> >
> >
> > _______________________________________________
> >
> > Xen-devel mailing list
> >
> > Xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=Xen-devel@lists.xensource.com]
> >
> > http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
[http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
> >
> >
> >
> > No virus found in this incoming message.
> >
> > Checked by AVG - www.avg.com [http://www.avg.com/
[http://www.avg.com/]]
> >
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
07/27/09
> >
> > 17:59:00
> >
> >
> >
> > No virus found in this outgoing message.
> >
> > Checked by AVG - www.avg.com [http://www.avg.com/
[http://www.avg.com/]]
> >
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
07/27/09
> >
> > 17:59:00
> >
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> >
> > Xen-devel mailing list
> >
> > Xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=Xen-devel@lists.xensource.com]
> >
> > http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
[http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]]
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=Xen-devel@lists.xensource.com]
> http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
>
>
>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
[https://mail.asiasoftsea.net/mc/compose?to=Xen-devel@lists.xensource.com]
http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
Checked
by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.33/2267 - Release Date: 07/27/09
17:59:00
[-- Attachment #1.2: Type: text/html, Size: 80518 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
@ 2009-07-29 4:25 Boris Derzhavets
2009-07-29 4:19 ` Teo En Ming
0 siblings, 1 reply; 86+ messages in thread
From: Boris Derzhavets @ 2009-07-29 4:25 UTC (permalink / raw)
To: 'Pasi Kärkkäinen'; +Cc: xen-devel, 'Teo En Ming'
[-- Attachment #1.1: Type: text/plain, Size: 23447 bytes --]
>Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
>You use it to passthrough SCSI or SATA _controller_ (HBA).
Pasi,
I understand that . South Bridge ICH9(10)R is located PCI Bus.
"lspci -v" gives me :-
00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
port SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 8277
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 4347
I/O ports at 9c00 [size=8]
I/O ports at 9880 [size=4]
I/O ports at 9800 [size=8]
I/O ports at 9480 [size=4]
I/O ports at 9400 [size=32]
Memory at f9ffe800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Mask- 64bit- Count=1/16 Enable+
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA <?>
Capabilities: [b0] Vendor Specific Information <?>
Kernel driver in use: ahci
How to manage afterwards ? Link would be fine.
Thanks.
Boris.
--- On Tue, 7/28/09, Pasi Kärkkäinen <pasik@iki.fi> wrote:
From: Pasi Kärkkäinen <pasik@iki.fi>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>
Cc: xen-devel@lists.xensource.com, "Teo En Ming"
<enming.teo@asiasoftsea.net>
Date: Tuesday, July 28, 2009, 10:24 AM
On Tue, Jul 28, 2009 at 06:49:49AM -0700, Boris Derzhavets wrote:
> >Xen supports PCI device passthrough to paravirtualized domUs without any
> > additional hardware support/requirements.
>
> It was never my concern. But , i guess it works for SCSI drives , not
SATA.
>
Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
You use it to passthrough SCSI or SATA _controller_ (HBA). Or a NIC.
Or a USB controller. Or a graphics card.
-- Pasi
> Boris.
>
> --- On Tue, 7/28/09, Pasi Kärkkäinen <pasik@iki.fi> wrote:
>
> From: Pasi Kärkkäinen <pasik@iki.fi>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
> To: "Teo En Ming" <enming.teo@asiasoftsea.net>
> Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
> Date: Tuesday, July 28, 2009, 8:48 AM
>
> On Tue, Jul 28, 2009 at 08:27:35PM +0800, Teo En Ming wrote:
> > Dear Pasi,
> >
> > I thought only paravirtualized guests allow PCI devices to be passed
through
> > from the Dom 0 host? Fully virtualized guests like Windows are not able
to
> > access PCI devices directly in Dom 0.
> >
>
> Xen supports PCI device passthrough to paravirtualized domUs without any
> additional hardware support/requirements.
>
> PCI device passthrough to HVM domains requires VT-d (iommu) support.
>
> > Does Core 2 Duo support Intel VT-d? Or only in Xeons?
> >
>
> VT-d support is in the chipset. Not many chipsets have it yet.. And there
> are bugs in the VT-d support in many motherboards..
>
> > I am using Xen 3.4.1 testing code right now. Does it support PCI device
pass
> > through?
> >
>
> Yes, I think Xen 3.4.1 has VT-d support. Although the code is still not
very
> mature, especially with graphics cards there are a lot of problems.
>
> See xen-devel and xen-users archives for more information.
>
> -- Pasi
>
> > Thank you.
> >
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > BEng(Hons)(Mechanical Engineering)
> >
> > Technical Support Engineer
> >
> > Information Technology Department
> >
> > Asiasoft Online Pte Ltd
> >
> > Tampines Central 1 #04-01 Tampines Plaza
> >
> > Singapore 529541
> >
> > Republic of Singapore
> >
> > Mobile Phone: +65-9648-9798
> >
> > MSN: teoenming@hotmail.com
> >
> >
> > -----Original Message-----
> >
> > From: Pasi Kärkkäinen <pasik@iki.fi>
> >
> > To: "'Teo En Ming'" <enming.teo@asiasoftsea.net>
> >
> > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> > xen-devel@lists.xensource.com
> >
> > Date: Tue, 28 Jul 2009 20:32:10 +0800
> >
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> > Kernel
> >
> >
> >
> >
> > On Tue, Jul 28, 2009 at 07:25:58PM +0800, Teo En Ming wrote:
> >
> > > Dear Boris,
> >
> > >
> >
> > > Any way I can change the emulated display driver in Windows HVM guest
to a
> >
> >
> >
> > > better one for game playing?
> >
> > >
> >
> >
> >
> > You can't really do that. Qemu (used in Xen HVM domains) only provides
basic
> >
> > 2D display adapter, so it's not really suitable for gaming.
> >
> >
> >
> > If you want to experiment with unstable/development code, you could try
VT-d
> >
> > to passthrough a graphics adapter (the whole device) to HVM guest.
> >
> >
> >
> > I think there are also some graphics drivers that operate through the
> >
> > network, ie. communicate with dom0 graphics hardware, but I don't have
any
> >
> > links to those.
> >
> >
> >
> > Xen is mostly a server virtualization software/solution nowadays..
> >
> >
> >
> > -- Pasi
> >
> >
> >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > Technical Support Engineer
> >
> > >
> >
> > > Information Technology Department
> >
> > >
> >
> > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > Singapore 529541
> >
> > >
> >
> > > Republic of Singapore
> >
> > >
> >
> > > Mobile Phone: +65-9648-9798
> >
> > >
> >
> > > MSN: teoenming@hotmail.com
> >
> > >
> >
> > >
> >
> > > -----Original Message-----
> >
> > >
> >
> > > From: Boris Derzhavets <bderzhavets@yahoo.com>
> >
> > >
> >
> > > To: enming.teo@asiasoftsea.net, pasik@iki.fi
> >
> > >
> >
> > > Cc: xen-devel@lists.xensource.com
> >
> > >
> >
> > > Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
> >
> > >
> >
> > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS
> >
> > > Kernel
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > It's really exciting ;)
> >
> > >
> >
> > > Boris.
> >
> > >
> >
> > > --- On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net> wrote:
> >
> > >
> >
> > > From: Teo En Ming <enming.teo@asiasoftsea.net>
> >
> > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS
> >
> > > Kernel
> >
> > > To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net>,
> >
> > pasik@iki.fi
> >
> > > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> >
> > > xen-devel@lists.xensource.com
> >
> > > Date: Tuesday, July 28, 2009, 7:07 AM
> >
> > >
> >
> > >
> >
> > > Hi,
> >
> > >
> >
> > >
> >
> > >
> >
> > > I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0 Kernel
> >
> > > 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
> >
> > >
> >
> > >
> >
> > >
> >
> > > Please see screenshots here:
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> >
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
> >
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-
v]
> >
> > irtual-machine-on.html
> >
> > >
> >
> > >
> >
> > >
> >
> > > Can I change the emulated display adapter driver in Windows XP HVM
> >
> > > guest under Xen to a better one so that I can play games?
> >
> > >
> >
> > >
> >
> > >
> >
> > > Thank you!!!
> >
> > >
> >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > Technical Support Engineer
> >
> > >
> >
> > > Information Technology Department
> >
> > >
> >
> > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > Singapore 529541
> >
> > >
> >
> > > Republic of Singapore
> >
> > >
> >
> > > Mobile Phone: +65-9648-9798
> >
> > >
> >
> > > MSN: teoenming@hotmail.com
> >
> > >
> >
> > >
> >
> > >
> >
> > > -----Original
> >
> > > Message-----
> >
> > >
> >
> > > From: "Teo En Ming (Zhang Enming)"
> >
> > > <enming.teo@asiasoftsea.net>
> >
> > >
> >
> > > To: <pasik@iki.fi>
> >
> > >
> >
> > > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> >
> > > xen-devel@lists.xensource.com
> >
> > >
> >
> > > Date: Tue, 28 Jul 2009 19:13:34 +0800
> >
> > >
> >
> > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> >
> > > PVOPS Kernel
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > Dear All,
> >
> > >
> >
> > >
> >
> > >
> >
> > > I have managed to virtualize Windows 7 32-bit as a HVM guest on
> >
> > > Xen 3.4.1
> >
> > >
> >
> > > RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> >
> > > operating
> >
> > >
> >
> > > system.
> >
> > >
> >
> > >
> >
> > >
> >
> > > Please see screenshots here:
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> >
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
> >
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
i]
> >
> >
> >
> > >
> >
> >
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> >
[http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
]
> >
> > i]
> >
> > >
> >
> > >
> >
> > > rtual-machine-on-xen.html
> >
> > >
> >
> > >
> >
> > >
> >
> > > I have uploaded 24 pictures so far at the time of this writing.
> >
> > >
> >
> > >
> >
> > >
> >
> > > Regards,
> >
> > >
> >
> > >
> >
> > >
> >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > >
> >
> > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > Technical Support Engineer
> >
> > >
> >
> > > Information Technology Department
> >
> > >
> >
> > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > Singapore 529541
> >
> > >
> >
> > > Republic of Singapore
> >
> > >
> >
> > > Mobile: +65-9648-9798
> >
> > >
> >
> > > MSN: teoenming@hotmail.com
> >
> > >
> >
> > >
> >
> > >
> >
> > > -----Original Message-----
> >
> > >
> >
> > > From: xen-devel-bounces@lists.xensource.com
> >
> > >
> >
> > > [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi
> >
> > > Kärkkäinen
> >
> > >
> >
> > > Sent: Monday, July 27, 2009 11:24 PM
> >
> > >
> >
> > > To: Teo En Ming
> >
> > >
> >
> > > Cc: Boris Derzhavets; xen-devel@lists.xensource.com
> >
> > >
> >
> > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> >
> > > Jeremy's PVOPS
> >
> > >
> >
> > > Kernel
> >
> > >
> >
> > >
> >
> > >
> >
> > > On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
> >
> > >
> >
> > > > Dear Pasi,
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Any idea on what benchmark tools I can use to measure I/O
> >
> > > performance of
> >
> > >
> >
> > > my
> >
> > >
> >
> > > > virtual machines?
> >
> > >
> >
> > > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > Well for simple streaming IO tests you can use dd, it supports
> >
> > > multiple
> >
> > >
> >
> > > block sizes, O_DIRECT etc.
> >
> > >
> >
> > >
> >
> > >
> >
> > > If you need multithreaded/multiprocess tests, or filesystem IO
> >
> > > tests, then
> >
> > >
> >
> > > you need something more sophisticated.. bonnie++, ltp disktest,
> >
> > > fio, iozone
> >
> > >
> >
> > > etc. Google is your friend.
> >
> > >
> >
> > >
> >
> > >
> >
> > > -- Pasi
> >
> > >
> >
> > >
> >
> > >
> >
> > > > Thank you.
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > >
> >
> > > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Technical Support Engineer
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Information Technology Department
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Singapore 529541
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Republic of Singapore
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Mobile Phone: +65-9648-9798
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > MSN: teoenming@hotmail.com
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > -----Original Message-----
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > From: Pasi Kärkkäinen <pasik@iki.fi>
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > To: Teo En Ming <enming.teo@asiasoftsea.net>
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
> >
> > >
> >
> > > xen-devel@lists.xensource.com
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Date: Mon, 27 Jul 2009 18:01:55 +0300
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> >
> > > Jeremy's PVOPS
> >
> > >
> >
> > > > Kernel
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > Dear Boris,
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > Based on your given information, I have managed to
> >
> > > configure static IP
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > address inside OpenSolaris UNIX PV guest.
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > These are the two crucial lines:
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
> >
> > > /etc/hostname.xnf0
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > echo 192.168.1.102 > /etc/defaultrouter
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > Please see screenshot here:
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > >
> >
> > >
> >
> >
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
> >
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
1]
> >
> >
> >
> > >
> >
> >
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
]
> >
> > 1]
> >
> > >
> >
> > >
> >
> > > 600-h/03.jpeg
> >
> > >
> >
> > > >
> >
> > >
> >
> > >
> >
> > >
> >
> >
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
]
> >
> >
> >
> > >
> >
> >
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
[http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
]
> >
> > ]
> >
> > >
> >
> > >
> >
> > > 1600-h/03.jpeg]
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > May I know whether there are any PV device drivers for
> >
> > > me to install to
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > improve PV guests' performance? What are the
> >
> > > recommended benchmark tools
> >
> > >
> >
> > >
> >
> > >
> >
> > > > to
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > measure I/O performance of PV guests?
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > PV guest doesn't need any additional drivers. Like the name
> >
> > > PV says, it's
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > paravirtual, and uses the optimized drivers/interfaces
> >
> > > out-of-the-box.
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > -- Pasi
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > _______________________________________________
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Xen-devel mailing list
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Xen-devel@lists.xensource.com
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> > >
> >
> > > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]]
> >
> > >
> >
> > >
> >
> > >
> >
> > > _______________________________________________
> >
> > >
> >
> > > Xen-devel mailing list
> >
> > >
> >
> > > Xen-devel@lists.xensource.com
> >
> > >
> >
> > > http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this incoming message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/]
[http://www.avg.com/
> > [http://www.avg.com/]]
> >
> > >
> >
> > > Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/26/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this outgoing message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/]
[http://www.avg.com/
> > [http://www.avg.com/]]
> >
> > >
> >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/27/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > _______________________________________________
> >
> > >
> >
> > > Xen-devel mailing list
> >
> > >
> >
> > > Xen-devel@lists.xensource.com
> >
> > >
> >
> > > http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this incoming message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/]
[http://www.avg.com/
> > [http://www.avg.com/]]
> >
> > >
> >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/27/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this outgoing message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/]
[http://www.avg.com/
> > [http://www.avg.com/]]
> >
> > >
> >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/27/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > _______________________________________________
> >
> > >
> >
> > > Xen-devel mailing list
> >
> > >
> >
> > > Xen-devel@lists.xensource.com
> >
> > >
> >
> > > http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> >
> >
> > _______________________________________________
> >
> > Xen-devel mailing list
> >
> > Xen-devel@lists.xensource.com
> >
> > http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
> >
> >
> >
> > No virus found in this incoming message.
> >
> > Checked by AVG - www.avg.com [http://www.avg.com/]
> >
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
07/27/09
> >
> > 17:59:00
> >
> >
> >
> > No virus found in this outgoing message.
> >
> > Checked by AVG - www.avg.com [http://www.avg.com/]
> >
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
07/27/09
> >
> > 17:59:00
> >
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> >
> > Xen-devel mailing list
> >
> > Xen-devel@lists.xensource.com
> >
> > http://lists.xensource.com/xen-devel
[http://lists.xensource.com/xen-devel]
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
>
>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.33/2267 - Release Date: 07/27/09
17:59:00
[-- Attachment #1.2: Type: text/html, Size: 63844 bytes --]
[-- Attachment #2: ATT00046.txt --]
[-- Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* RE: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-29 4:19 ` Teo En Ming
@ 2009-07-29 13:07 ` Teo En Ming (Zhang Enming)
2009-07-29 13:23 ` Pasi Kärkkäinen
0 siblings, 1 reply; 86+ messages in thread
From: Teo En Ming (Zhang Enming) @ 2009-07-29 13:07 UTC (permalink / raw)
To: enming.teo, 'Boris Derzhavets',
'Pasi Kärkkäinen'
Cc: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 27252 bytes --]
Hi,
I am looking forward to virtualizing Mac OS X x86 (Intel) version. May I
know whether it is free or must be purchased?
If it is free, where is the official download link?
Thank you.
Regards,
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@hotmail.com
_____
From: xen-devel-bounces@lists.xensource.com
[mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Teo En Ming
Sent: Wednesday, July 29, 2009 12:20 PM
To: Boris Derzhavets; 'Pasi Kärkkäinen'
Cc: xen-devel@lists.xensource.com
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
Dear All,
I have also virtualized Windows Server 2003 Standard Edition 32-bit on Xen
3.4.1 RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
operating system.
Please see screenshots here:
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-server-2
003-standard-edition.html
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile Phone: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: "Boris Derzhavets" <bderzhavets@yahoo.com>
To: 'Pasi Kärkkäinen' <pasik@iki.fi>
Cc: <xen-devel@lists.xensource.com>, "'Teo En Ming'"
<enming.teo@asiasoftsea.net>
Date: Wed, 29 Jul 2009 12:25:42 +0800
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
>Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
>You use it to passthrough SCSI or SATA _controller_ (HBA).
Pasi,
I understand that . South Bridge ICH9(10)R is located PCI Bus.
"lspci -v" gives me :-
00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
port SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 8277
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 4347
I/O ports at 9c00 [size=8]
I/O ports at 9880 [size=4]
I/O ports at 9800 [size=8]
I/O ports at 9480 [size=4]
I/O ports at 9400 [size=32]
Memory at f9ffe800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Mask- 64bit- Count=1/16 Enable+
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA <?>
Capabilities: [b0] Vendor Specific Information <?>
Kernel driver in use: ahci
How to manage afterwards ? Link would be fine.
Thanks.
Boris.
--- On Tue, 7/28/09, Pasi Kärkkäinen <pasik@iki.fi> wrote:
From: Pasi Kärkkäinen <pasik@iki.fi>
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
To: "Boris Derzhavets" <bderzhavets@yahoo.com>
Cc: xen-devel@lists.xensource.com, "Teo En Ming"
<enming.teo@asiasoftsea.net>
Date: Tuesday, July 28, 2009, 10:24 AM
On Tue, Jul 28, 2009 at 06:49:49AM -0700, Boris Derzhavets wrote:
> >Xen supports PCI device passthrough to paravirtualized domUs without any
> > additional hardware support/requirements.
>
> It was never my concern. But , i guess it works for SCSI drives , not
SATA.
>
Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
You use it to passthrough SCSI or SATA _controller_ (HBA). Or a NIC.
Or a USB controller. Or a graphics card.
-- Pasi
> Boris.
>
> --- On Tue, 7/28/09, Pasi Kärkkäinen < pasik@iki.fi> wrote:
>
> From: Pasi Kärkkäinen < pasik@iki.fi>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
> To: "Teo En Ming" <enming.teo@asiasoftsea.net >
> Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
xen-devel@lists.xensource.com
> Date: Tuesday, July 28, 2009, 8:48 AM
>
> On Tue, Jul 28, 2009 at 08:27:35PM +0800, Teo En Ming wrote:
> > Dear Pasi,
> >
> > I thought only paravirtualized guests allow PCI devices to be passed
through
> > from the Dom 0 host? Fully virtualized guests like Windows are not able
to
> > access PCI devices directly in Dom 0.
> >
>
> Xen supports PCI device passthrough to paravirtualized domUs without any
> additional hardware support/requirements.
>
> PCI device passthrough to HVM domains requires VT-d (iommu) support.
>
> > Does Core 2 Duo support Intel VT-d? Or only in Xeons?
> >
>
> VT-d support is in the chipset. Not many chipsets have it yet.. And there
> are bugs in the VT-d support in many motherboards..
>
> > I am using Xen 3.4.1 testing code right now. Does it support PCI device
pass
> > through?
> >
>
> Yes, I think Xen 3.4.1 has VT-d support. Although the code is still not
very
> mature, especially with graphics cards there are a lot of problems.
>
> See xen-devel and xen-users archives for more information.
>
> -- Pasi
>
> > Thank you.
> >
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > BEng(Hons)(Mechanical Engineering)
> >
> > Technical Support Engineer
> >
> > Information Technology Department
> >
> > Asiasoft Online Pte Ltd
> >
> > Tampines Central 1 #04-01 Tampines Plaza
> >
> > Singapore 529541
> >
> > Republic of Singapore
> >
> > Mobile Phone: +65-9648-9798
> >
> > MSN: teoenming@hotmail.com
> >
> >
> > -----Original Message-----
> >
> > From: Pasi Kärkkäinen < pasik@iki.fi>
> >
> > To: "'Teo En Ming'" <enming.teo@asiasoftsea.net >
> >
> > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> > xen-devel@lists.xensource.com
> >
> > Date: Tue, 28 Jul 2009 20:32:10 +0800
> >
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> > Kernel
> >
> >
> >
> >
> > On Tue, Jul 28, 2009 at 07:25:58PM +0800, Teo En Ming wrote:
> >
> > > Dear Boris,
> >
> > >
> >
> > > Any way I can change the emulated display driver in Windows HVM guest
to a
> >
> >
> >
> > > better one for game playing?
> >
> > >
> >
> >
> >
> > You can't really do that. Qemu (used in Xen HVM domains) only provides
basic
> >
> > 2D display adapter, so it's not really suitable for gaming.
> >
> >
> >
> > If you want to experiment with unstable/development code, you could try
VT-d
> >
> > to passthrough a graphics adapter (the whole device) to HVM guest.
> >
> >
> >
> > I think there are also some graphics drivers that operate through the
> >
> > network, ie. communicate with dom0 graphics hardware, but I don't have
any
> >
> > links to those.
> >
> >
> >
> > Xen is mostly a server virtualization software/solution nowadays..
> >
> >
> >
> > -- Pasi
> >
> >
> >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > Technical Support Engineer
> >
> > >
> >
> > > Information Technology Department
> >
> > >
> >
> > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > Singapore 529541
> >
> > >
> >
> > > Republic of Singapore
> >
> > >
> >
> > > Mobile Phone: +65-9648-9798
> >
> > >
> >
> > > MSN: teoenming@hotmail.com
> >
> > >
> >
> > >
> >
> > > -----Original Message-----
> >
> > >
> >
> > > From: Boris Derzhavets <bderzhavets@yahoo.com>
> >
> > >
> >
> > > To: enming.teo@asiasoftsea.net, pasik@iki.fi
> >
> > >
> >
> > > Cc: xen-devel@lists.xensource.com
> >
> > >
> >
> > > Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
> >
> > >
> >
> > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS
> >
> > > Kernel
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > It's really exciting ;)
> >
> > >
> >
> > > Boris.
> >
> > >
> >
> > > --- On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net > wrote:
> >
> > >
> >
> > > From: Teo En Ming <enming.teo@asiasoftsea.net >
> >
> > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS
> >
> > > Kernel
> >
> > > To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net >,
> >
> > pasik@iki.fi
> >
> > > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> >
> > > xen-devel@lists.xensource.com
> >
> > > Date: Tuesday, July 28, 2009, 7:07 AM
> >
> > >
> >
> > >
> >
> > > Hi,
> >
> > >
> >
> > >
> >
> > >
> >
> > > I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0 Kernel
> >
> > > 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
> >
> > >
> >
> > >
> >
> > >
> >
> > > Please see screenshots here:
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> >
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
> > [
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
<http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-
v> ]
> >
> > irtual-machine-on.html
> >
> > >
> >
> > >
> >
> > >
> >
> > > Can I change the emulated display adapter driver in Windows XP HVM
> >
> > > guest under Xen to a better one so that I can play games?
> >
> > >
> >
> > >
> >
> > >
> >
> > > Thank you!!!
> >
> > >
> >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > Technical Support Engineer
> >
> > >
> >
> > > Information Technology Department
> >
> > >
> >
> > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > Singapore 529541
> >
> > >
> >
> > > Republic of Singapore
> >
> > >
> >
> > > Mobile Phone: +65-9648-9798
> >
> > >
> >
> > > MSN: teoenming@hotmail.com
> >
> > >
> >
> > >
> >
> > >
> >
> > > -----Original
> >
> > > Message-----
> >
> > >
> >
> > > From: "Teo En Ming (Zhang Enming)"
> >
> > > <enming.teo@asiasoftsea.net >
> >
> > >
> >
> > > To: < pasik@iki.fi>
> >
> > >
> >
> > > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> >
> > > xen-devel@lists.xensource.com
> >
> > >
> >
> > > Date: Tue, 28 Jul 2009 19:13:34 +0800
> >
> > >
> >
> > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> >
> > > PVOPS Kernel
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > Dear All,
> >
> > >
> >
> > >
> >
> > >
> >
> > > I have managed to virtualize Windows 7 32-bit as a HVM guest on
> >
> > > Xen 3.4.1
> >
> > >
> >
> > > RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> >
> > > operating
> >
> > >
> >
> > > system.
> >
> > >
> >
> > >
> >
> > >
> >
> > > Please see screenshots here:
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> >
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
> > [
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
<http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
i> ]
> >
> >
> >
> > >
> >
> > [
<http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > [
<http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
]
> >
> > i]
> >
> > >
> >
> > >
> >
> > > rtual-machine-on-xen.html
> >
> > >
> >
> > >
> >
> > >
> >
> > > I have uploaded 24 pictures so far at the time of this writing.
> >
> > >
> >
> > >
> >
> > >
> >
> > > Regards,
> >
> > >
> >
> > >
> >
> > >
> >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > >
> >
> > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > Technical Support Engineer
> >
> > >
> >
> > > Information Technology Department
> >
> > >
> >
> > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > Singapore 529541
> >
> > >
> >
> > > Republic of Singapore
> >
> > >
> >
> > > Mobile: +65-9648-9798
> >
> > >
> >
> > > MSN: teoenming@hotmail.com
> >
> > >
> >
> > >
> >
> > >
> >
> > > -----Original Message-----
> >
> > >
> >
> > > From: xen-devel-bounces@lists.xensource.com
> >
> > >
> >
> > > [mailto: xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi
> >
> > > Kärkkäinen
> >
> > >
> >
> > > Sent: Monday, July 27, 2009 11:24 PM
> >
> > >
> >
> > > To: Teo En Ming
> >
> > >
> >
> > > Cc: Boris Derzhavets; xen-devel@lists.xensource.com
> >
> > >
> >
> > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> >
> > > Jeremy's PVOPS
> >
> > >
> >
> > > Kernel
> >
> > >
> >
> > >
> >
> > >
> >
> > > On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
> >
> > >
> >
> > > > Dear Pasi,
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Any idea on what benchmark tools I can use to measure I/O
> >
> > > performance of
> >
> > >
> >
> > > my
> >
> > >
> >
> > > > virtual machines?
> >
> > >
> >
> > > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > Well for simple streaming IO tests you can use dd, it supports
> >
> > > multiple
> >
> > >
> >
> > > block sizes, O_DIRECT etc.
> >
> > >
> >
> > >
> >
> > >
> >
> > > If you need multithreaded/multiprocess tests, or filesystem IO
> >
> > > tests, then
> >
> > >
> >
> > > you need something more sophisticated.. bonnie++, ltp disktest,
> >
> > > fio, iozone
> >
> > >
> >
> > > etc. Google is your friend.
> >
> > >
> >
> > >
> >
> > >
> >
> > > -- Pasi
> >
> > >
> >
> > >
> >
> > >
> >
> > > > Thank you.
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> >
> > >
> >
> > > > BEng(Hons)(Mechanical Engineering)
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Technical Support Engineer
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Information Technology Department
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Asiasoft Online Pte Ltd
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Tampines Central 1 #04-01 Tampines Plaza
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Singapore 529541
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Republic of Singapore
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Mobile Phone: +65-9648-9798
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > MSN: teoenming@hotmail.com
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > -----Original Message-----
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > From: Pasi Kärkkäinen < pasik@iki.fi>
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > To: Teo En Ming <enming.teo@asiasoftsea.net >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
> >
> > >
> >
> > > xen-devel@lists.xensource.com
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Date: Mon, 27 Jul 2009 18:01:55 +0300
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> >
> > > Jeremy's PVOPS
> >
> > >
> >
> > > > Kernel
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > Dear Boris,
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > Based on your given information, I have managed to
> >
> > > configure static IP
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > address inside OpenSolaris UNIX PV guest.
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > These are the two crucial lines:
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
> >
> > > /etc/hostname.xnf0
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > echo 192.168.1.102 > /etc/defaultrouter
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > Please see screenshot here:
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > >
> >
> > >
> >
> >
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
> > [
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
1> ]
> >
> >
> >
> > >
> >
> > [
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > [
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
]
> >
> > 1]
> >
> > >
> >
> > >
> >
> > > 600-h/03.jpeg
> >
> > >
> >
> > > >
> >
> > >
> >
> > >
> >
> > >
> >
> > [
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > [
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
]
> >
> >
> >
> > >
> >
> > [
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > [
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> ]
> >
> > ]
> >
> > >
> >
> > >
> >
> > > 1600-h/03.jpeg]
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > May I know whether there are any PV device drivers for
> >
> > > me to install to
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > improve PV guests' performance? What are the
> >
> > > recommended benchmark tools
> >
> > >
> >
> > >
> >
> > >
> >
> > > > to
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > measure I/O performance of PV guests?
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > PV guest doesn't need any additional drivers. Like the name
> >
> > > PV says, it's
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > paravirtual, and uses the optimized drivers/interfaces
> >
> > > out-of-the-box.
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > -- Pasi
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > _______________________________________________
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Xen-devel mailing list
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Xen-devel@lists.xensource.com
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > > [ <http://lists.xensource.com/xen-devel>
http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> > >
> >
> > > [ http://lists.xensource.com/xen-devel
<http://lists.xensource.com/xen-devel>
> > [http://lists.xensource.com/xen-devel]
> >
> > > [ <http://lists.xensource.com/xen-devel>
http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]]
> >
> > >
> >
> > >
> >
> > >
> >
> > > _______________________________________________
> >
> > >
> >
> > > Xen-devel mailing list
> >
> > >
> >
> > > Xen-devel@lists.xensource.com
> >
> > >
> >
> > > http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this incoming message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/]
[http://www.avg.com/
> > [ http://www.avg.com/ <http://www.avg.com/> ]]
> >
> > >
> >
> > > Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/26/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this outgoing message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/]
[http://www.avg.com/
> > [ http://www.avg.com/ <http://www.avg.com/> ]]
> >
> > >
> >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/27/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > _______________________________________________
> >
> > >
> >
> > > Xen-devel mailing list
> >
> > >
> >
> > > Xen-devel@lists.xensource.com
> >
> > >
> >
> > > http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this incoming message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/]
[http://www.avg.com/
> > [ http://www.avg.com/ <http://www.avg.com/> ]]
> >
> > >
> >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/27/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > > No virus found in this outgoing message.
> >
> > >
> >
> > > Checked by AVG - www.avg.com [http://www.avg.com/]
[http://www.avg.com/
> > [ http://www.avg.com/ <http://www.avg.com/> ]]
> >
> > >
> >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> >
> > > 07/27/09
> >
> > >
> >
> > > 17:59:00
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > _______________________________________________
> >
> > >
> >
> > > Xen-devel mailing list
> >
> > >
> >
> > > Xen-devel@lists.xensource.com
> >
> > >
> >
> > > http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]
> >
> > [http://lists.xensource.com/xen-devel
> > [http://lists.xensource.com/xen-devel]]
> >
> >
> >
> > _______________________________________________
> >
> > Xen-devel mailing list
> >
> > Xen-devel@lists.xensource.com
> >
> > http://lists.xensource.com/xen-devel [
<http://lists.xensource.com/xen-devel>
http://lists.xensource.com/xen-devel]
> >
> >
> >
> > No virus found in this incoming message.
> >
> > Checked by AVG - www.avg.com [http://www.avg.com/]
> >
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
07/27/09
> >
> > 17:59:00
> >
> >
> >
> > No virus found in this outgoing message.
> >
> > Checked by AVG - www.avg.com [http://www.avg.com/]
> >
> > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
07/27/09
> >
> > 17:59:00
> >
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> >
> > Xen-devel mailing list
> >
> > Xen-devel@lists.xensource.com
> >
> > http://lists.xensource.com/xen-devel [
<http://lists.xensource.com/xen-devel>
http://lists.xensource.com/xen-devel]
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
>
>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.33/2267 - Release Date: 07/27/09
17:59:00
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.33/2267 - Release Date: 07/28/09
17:58:00
[-- Attachment #1.2: Type: text/html, Size: 73047 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-29 13:07 ` Teo En Ming (Zhang Enming)
@ 2009-07-29 13:23 ` Pasi Kärkkäinen
2009-07-29 13:26 ` Teo En Ming (Zhang Enming)
0 siblings, 1 reply; 86+ messages in thread
From: Pasi Kärkkäinen @ 2009-07-29 13:23 UTC (permalink / raw)
To: Teo En Ming (Zhang Enming); +Cc: 'Boris Derzhavets', xen-devel
On Wed, Jul 29, 2009 at 09:07:48PM +0800, Teo En Ming (Zhang Enming) wrote:
> Hi,
>
>
>
> I am looking forward to virtualizing Mac OS X x86 (Intel) version. May I
> know whether it is free or must be purchased?
>
>
>
> If it is free, where is the official download link?
>
OSX is not free.
Also I think the license agreement of OSX forbids you to install it into
anything else than a Mac.
-- Pasi
>
>
> Thank you.
>
>
>
> Regards,
>
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
>
> Republic of Singapore
> Mobile: +65-9648-9798
> MSN: teoenming@hotmail.com
>
> _____
>
> From: xen-devel-bounces@lists.xensource.com
> [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Teo En Ming
> Sent: Wednesday, July 29, 2009 12:20 PM
> To: Boris Derzhavets; 'Pasi Kärkkäinen'
> Cc: xen-devel@lists.xensource.com
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
>
>
> Dear All,
>
>
>
> I have also virtualized Windows Server 2003 Standard Edition 32-bit on Xen
> 3.4.1 RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> operating system.
>
>
>
> Please see screenshots here:
>
>
>
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-server-2
> 003-standard-edition.html
>
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
>
> Republic of Singapore
> Mobile Phone: +65-9648-9798
> MSN: teoenming@hotmail.com
>
>
>
> -----Original Message-----
> From: "Boris Derzhavets" <bderzhavets@yahoo.com>
> To: 'Pasi Kärkkäinen' <pasik@iki.fi>
> Cc: <xen-devel@lists.xensource.com>, "'Teo En Ming'"
> <enming.teo@asiasoftsea.net>
> Date: Wed, 29 Jul 2009 12:25:42 +0800
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
>
> >Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
>
> >You use it to passthrough SCSI or SATA _controller_ (HBA).
>
> Pasi,
>
> I understand that . South Bridge ICH9(10)R is located PCI Bus.
> "lspci -v" gives me :-
>
> 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
> port SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
>
> Subsystem: ASUSTeK Computer Inc. Device 8277
>
> Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 4347
>
> I/O ports at 9c00 [size=8]
>
> I/O ports at 9880 [size=4]
>
> I/O ports at 9800 [size=8]
>
> I/O ports at 9480 [size=4]
>
> I/O ports at 9400 [size=32]
>
> Memory at f9ffe800 (32-bit, non-prefetchable) [size=2K]
>
> Capabilities: [80] MSI: Mask- 64bit- Count=1/16 Enable+
>
> Capabilities: [70] Power Management version 3
>
> Capabilities: [a8] SATA HBA <?>
>
> Capabilities: [b0] Vendor Specific Information <?>
>
> Kernel driver in use: ahci
>
> How to manage afterwards ? Link would be fine.
>
> Thanks.
> Boris.
>
> --- On Tue, 7/28/09, Pasi Kärkkäinen <pasik@iki.fi> wrote:
>
>
> From: Pasi Kärkkäinen <pasik@iki.fi>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
> To: "Boris Derzhavets" <bderzhavets@yahoo.com>
> Cc: xen-devel@lists.xensource.com, "Teo En Ming"
> <enming.teo@asiasoftsea.net>
> Date: Tuesday, July 28, 2009, 10:24 AM
>
> On Tue, Jul 28, 2009 at 06:49:49AM -0700, Boris Derzhavets wrote:
> > >Xen supports PCI device passthrough to paravirtualized domUs without any
> > > additional hardware support/requirements.
> >
> > It was never my concern. But , i guess it works for SCSI drives , not
> SATA.
> >
>
> Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
>
> You use it to passthrough SCSI or SATA _controller_ (HBA). Or a NIC.
> Or a USB controller. Or a graphics card.
>
> -- Pasi
>
> > Boris.
> >
> > --- On Tue, 7/28/09, Pasi Kärkkäinen < pasik@iki.fi> wrote:
> >
> > From: Pasi Kärkkäinen < pasik@iki.fi>
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
> > To: "Teo En Ming" <enming.teo@asiasoftsea.net >
> > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> xen-devel@lists.xensource.com
> > Date: Tuesday, July 28, 2009, 8:48 AM
> >
> > On Tue, Jul 28, 2009 at 08:27:35PM +0800, Teo En Ming wrote:
> > > Dear Pasi,
> > >
> > > I thought only paravirtualized guests allow PCI devices to be passed
> through
> > > from the Dom 0 host? Fully virtualized guests like Windows are not able
> to
> > > access PCI devices directly in Dom 0.
> > >
> >
> > Xen supports PCI device passthrough to paravirtualized domUs without any
> > additional hardware support/requirements.
> >
> > PCI device passthrough to HVM domains requires VT-d (iommu) support.
> >
> > > Does Core 2 Duo support Intel VT-d? Or only in Xeons?
> > >
> >
> > VT-d support is in the chipset. Not many chipsets have it yet.. And there
> > are bugs in the VT-d support in many motherboards..
> >
> > > I am using Xen 3.4.1 testing code right now. Does it support PCI device
> pass
> > > through?
> > >
> >
> > Yes, I think Xen 3.4.1 has VT-d support. Although the code is still not
> very
> > mature, especially with graphics cards there are a lot of problems.
> >
> > See xen-devel and xen-users archives for more information.
> >
> > -- Pasi
> >
> > > Thank you.
> > >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > > BEng(Hons)(Mechanical Engineering)
> > >
> > > Technical Support Engineer
> > >
> > > Information Technology Department
> > >
> > > Asiasoft Online Pte Ltd
> > >
> > > Tampines Central 1 #04-01 Tampines Plaza
> > >
> > > Singapore 529541
> > >
> > > Republic of Singapore
> > >
> > > Mobile Phone: +65-9648-9798
> > >
> > > MSN: teoenming@hotmail.com
> > >
> > >
> > > -----Original Message-----
> > >
> > > From: Pasi Kärkkäinen < pasik@iki.fi>
> > >
> > > To: "'Teo En Ming'" <enming.teo@asiasoftsea.net >
> > >
> > > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> > > xen-devel@lists.xensource.com
> > >
> > > Date: Tue, 28 Jul 2009 20:32:10 +0800
> > >
> > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
>
> > > Kernel
> > >
> > >
> > >
> > >
> > > On Tue, Jul 28, 2009 at 07:25:58PM +0800, Teo En Ming wrote:
> > >
> > > > Dear Boris,
> > >
> > > >
> > >
> > > > Any way I can change the emulated display driver in Windows HVM guest
> to a
> > >
> > >
> > >
> > > > better one for game playing?
> > >
> > > >
> > >
> > >
> > >
> > > You can't really do that. Qemu (used in Xen HVM domains) only provides
> basic
> > >
> > > 2D display adapter, so it's not really suitable for gaming.
> > >
> > >
> > >
> > > If you want to experiment with unstable/development code, you could try
> VT-d
> > >
> > > to passthrough a graphics adapter (the whole device) to HVM guest.
> > >
> > >
> > >
> > > I think there are also some graphics drivers that operate through the
> > >
> > > network, ie. communicate with dom0 graphics hardware, but I don't have
> any
> > >
> > > links to those.
> > >
> > >
> > >
> > > Xen is mostly a server virtualization software/solution nowadays..
> > >
> > >
> > >
> > > -- Pasi
> > >
> > >
> > >
> > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > >
> > > > BEng(Hons)(Mechanical Engineering)
> > >
> > > >
> > >
> > > > Technical Support Engineer
> > >
> > > >
> > >
> > > > Information Technology Department
> > >
> > > >
> > >
> > > > Asiasoft Online Pte Ltd
> > >
> > > >
> > >
> > > > Tampines Central 1 #04-01 Tampines Plaza
> > >
> > > >
> > >
> > > > Singapore 529541
> > >
> > > >
> > >
> > > > Republic of Singapore
> > >
> > > >
> > >
> > > > Mobile Phone: +65-9648-9798
> > >
> > > >
> > >
> > > > MSN: teoenming@hotmail.com
> > >
> > > >
> > >
> > > >
> > >
> > > > -----Original Message-----
> > >
> > > >
> > >
> > > > From: Boris Derzhavets <bderzhavets@yahoo.com>
> > >
> > > >
> > >
> > > > To: enming.teo@asiasoftsea.net, pasik@iki.fi
> > >
> > > >
> > >
> > > > Cc: xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
> > >
> > > >
> > >
> > > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> PVOPS
> > >
> > > > Kernel
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > It's really exciting ;)
> > >
> > > >
> > >
> > > > Boris.
> > >
> > > >
> > >
> > > > --- On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net > wrote:
> > >
> > > >
> > >
> > > > From: Teo En Ming <enming.teo@asiasoftsea.net >
> > >
> > > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> PVOPS
> > >
> > > > Kernel
> > >
> > > > To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net >,
> > >
> > > pasik@iki.fi
> > >
> > > > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> > >
> > > > xen-devel@lists.xensource.com
> > >
> > > > Date: Tuesday, July 28, 2009, 7:07 AM
> > >
> > > >
> > >
> > > >
> > >
> > > > Hi,
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0 Kernel
> > >
> > > > 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Please see screenshots here:
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > >
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
>
> > > [
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
> <http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-
> v> ]
> > >
> > > irtual-machine-on.html
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Can I change the emulated display adapter driver in Windows XP HVM
> > >
> > > > guest under Xen to a better one so that I can play games?
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Thank you!!!
> > >
> > > >
> > >
> > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > >
> > > > BEng(Hons)(Mechanical Engineering)
> > >
> > > >
> > >
> > > > Technical Support Engineer
> > >
> > > >
> > >
> > > > Information Technology Department
> > >
> > > >
> > >
> > > > Asiasoft Online Pte Ltd
> > >
> > > >
> > >
> > > > Tampines Central 1 #04-01 Tampines Plaza
> > >
> > > >
> > >
> > > > Singapore 529541
> > >
> > > >
> > >
> > > > Republic of Singapore
> > >
> > > >
> > >
> > > > Mobile Phone: +65-9648-9798
> > >
> > > >
> > >
> > > > MSN: teoenming@hotmail.com
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > -----Original
> > >
> > > > Message-----
> > >
> > > >
> > >
> > > > From: "Teo En Ming (Zhang Enming)"
> > >
> > > > <enming.teo@asiasoftsea.net >
> > >
> > > >
> > >
> > > > To: < pasik@iki.fi>
> > >
> > > >
> > >
> > > > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> > >
> > > > xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > Date: Tue, 28 Jul 2009 19:13:34 +0800
> > >
> > > >
> > >
> > > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> > >
> > > > PVOPS Kernel
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Dear All,
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > I have managed to virtualize Windows 7 32-bit as a HVM guest on
> > >
> > > > Xen 3.4.1
> > >
> > > >
> > >
> > > > RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> > >
> > > > operating
> > >
> > > >
> > >
> > > > system.
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Please see screenshots here:
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > >
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
>
> > > [
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
> <http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> i> ]
> > >
> > >
> > >
> > > >
> > >
> > > [
> <http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> >
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > > [
> <http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> >
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> ]
> > >
> > > i]
> > >
> > > >
> > >
> > > >
> > >
> > > > rtual-machine-on-xen.html
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > I have uploaded 24 pictures so far at the time of this writing.
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Regards,
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > >
> > > >
> > >
> > > > BEng(Hons)(Mechanical Engineering)
> > >
> > > >
> > >
> > > > Technical Support Engineer
> > >
> > > >
> > >
> > > > Information Technology Department
> > >
> > > >
> > >
> > > > Asiasoft Online Pte Ltd
> > >
> > > >
> > >
> > > > Tampines Central 1 #04-01 Tampines Plaza
> > >
> > > >
> > >
> > > > Singapore 529541
> > >
> > > >
> > >
> > > > Republic of Singapore
> > >
> > > >
> > >
> > > > Mobile: +65-9648-9798
> > >
> > > >
> > >
> > > > MSN: teoenming@hotmail.com
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > -----Original Message-----
> > >
> > > >
> > >
> > > > From: xen-devel-bounces@lists.xensource.com
> > >
> > > >
> > >
> > > > [mailto: xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi
> > >
> > > > Kärkkäinen
> > >
> > > >
> > >
> > > > Sent: Monday, July 27, 2009 11:24 PM
> > >
> > > >
> > >
> > > > To: Teo En Ming
> > >
> > > >
> > >
> > > > Cc: Boris Derzhavets; xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> > >
> > > > Jeremy's PVOPS
> > >
> > > >
> > >
> > > > Kernel
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
> > >
> > > >
> > >
> > > > > Dear Pasi,
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Any idea on what benchmark tools I can use to measure I/O
> > >
> > > > performance of
> > >
> > > >
> > >
> > > > my
> > >
> > > >
> > >
> > > > > virtual machines?
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Well for simple streaming IO tests you can use dd, it supports
> > >
> > > > multiple
> > >
> > > >
> > >
> > > > block sizes, O_DIRECT etc.
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > If you need multithreaded/multiprocess tests, or filesystem IO
> > >
> > > > tests, then
> > >
> > > >
> > >
> > > > you need something more sophisticated.. bonnie++, ltp disktest,
> > >
> > > > fio, iozone
> > >
> > > >
> > >
> > > > etc. Google is your friend.
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > -- Pasi
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > > Thank you.
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > >
> > > >
> > >
> > > > > BEng(Hons)(Mechanical Engineering)
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Technical Support Engineer
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Information Technology Department
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Asiasoft Online Pte Ltd
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Tampines Central 1 #04-01 Tampines Plaza
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Singapore 529541
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Republic of Singapore
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Mobile Phone: +65-9648-9798
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > MSN: teoenming@hotmail.com
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > -----Original Message-----
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > From: Pasi Kärkkäinen < pasik@iki.fi>
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > To: Teo En Ming <enming.teo@asiasoftsea.net >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
> > >
> > > >
> > >
> > > > xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Date: Mon, 27 Jul 2009 18:01:55 +0300
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> > >
> > > > Jeremy's PVOPS
> > >
> > > >
> > >
> > > > > Kernel
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > Dear Boris,
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > Based on your given information, I have managed to
> > >
> > > > configure static IP
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > address inside OpenSolaris UNIX PV guest.
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > These are the two crucial lines:
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
> > >
> > > > /etc/hostname.xnf0
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > echo 192.168.1.102 > /etc/defaultrouter
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > Please see screenshot here:
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
>
> > > [
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> 1> ]
> > >
> > >
> > >
> > > >
> > >
> > > [
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > [
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> ]
> > >
> > > 1]
> > >
> > > >
> > >
> > > >
> > >
> > > > 600-h/03.jpeg
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > [
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > [
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> ]
> > >
> > >
> > >
> > > >
> > >
> > > [
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > [
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > ]
> > >
> > > ]
> > >
> > > >
> > >
> > > >
> > >
> > > > 1600-h/03.jpeg]
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > May I know whether there are any PV device drivers for
> > >
> > > > me to install to
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > improve PV guests' performance? What are the
> > >
> > > > recommended benchmark tools
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > > to
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > measure I/O performance of PV guests?
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > PV guest doesn't need any additional drivers. Like the name
> > >
> > > > PV says, it's
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > paravirtual, and uses the optimized drivers/interfaces
> > >
> > > > out-of-the-box.
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > -- Pasi
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > _______________________________________________
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Xen-devel mailing list
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]
> > >
> > > > [ <http://lists.xensource.com/xen-devel>
> http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]]
> > >
> > > >
> > >
> > > > [ http://lists.xensource.com/xen-devel
> <http://lists.xensource.com/xen-devel>
> > > [http://lists.xensource.com/xen-devel]
> > >
> > > > [ <http://lists.xensource.com/xen-devel>
> http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]]]
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > _______________________________________________
> > >
> > > >
> > >
> > > > Xen-devel mailing list
> > >
> > > >
> > >
> > > > Xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]
> > >
> > > [http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]]
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > No virus found in this incoming message.
> > >
> > > >
> > >
> > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> [http://www.avg.com/
> > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > >
> > > >
> > >
> > > > Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date:
> > >
> > > > 07/26/09
> > >
> > > >
> > >
> > > > 17:59:00
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > No virus found in this outgoing message.
> > >
> > > >
> > >
> > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> [http://www.avg.com/
> > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > >
> > > >
> > >
> > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > >
> > > > 07/27/09
> > >
> > > >
> > >
> > > > 17:59:00
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > _______________________________________________
> > >
> > > >
> > >
> > > > Xen-devel mailing list
> > >
> > > >
> > >
> > > > Xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]
> > >
> > > [http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]]
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > No virus found in this incoming message.
> > >
> > > >
> > >
> > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> [http://www.avg.com/
> > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > >
> > > >
> > >
> > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > >
> > > > 07/27/09
> > >
> > > >
> > >
> > > > 17:59:00
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > No virus found in this outgoing message.
> > >
> > > >
> > >
> > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> [http://www.avg.com/
> > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > >
> > > >
> > >
> > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > >
> > > > 07/27/09
> > >
> > > >
> > >
> > > > 17:59:00
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > _______________________________________________
> > >
> > > >
> > >
> > > > Xen-devel mailing list
> > >
> > > >
> > >
> > > > Xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]
> > >
> > > [http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]]
> > >
> > >
> > >
> > > _______________________________________________
> > >
> > > Xen-devel mailing list
> > >
> > > Xen-devel@lists.xensource.com
> > >
> > > http://lists.xensource.com/xen-devel [
> <http://lists.xensource.com/xen-devel>
> http://lists.xensource.com/xen-devel]
> > >
> > >
> > >
> > > No virus found in this incoming message.
> > >
> > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> 07/27/09
> > >
> > > 17:59:00
> > >
> > >
> > >
> > > No virus found in this outgoing message.
> > >
> > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> 07/27/09
> > >
> > > 17:59:00
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > >
> > > Xen-devel mailing list
> > >
> > > Xen-devel@lists.xensource.com
> > >
> > > http://lists.xensource.com/xen-devel [
> <http://lists.xensource.com/xen-devel>
> http://lists.xensource.com/xen-devel]
> >
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xensource.com
> > http://lists.xensource.com/xen-devel
> >
> >
> >
> >
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
>
>
> Checked by AVG - www.avg.com
> Version: 8.5.375 / Virus Database: 270.13.33/2267 - Release Date: 07/27/09
> 17:59:00
>
> Checked by AVG - www.avg.com
> Version: 8.5.375 / Virus Database: 270.13.33/2267 - Release Date: 07/28/09
> 17:58:00
>
>
^ permalink raw reply [flat|nested] 86+ messages in thread
* RE: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-29 13:23 ` Pasi Kärkkäinen
@ 2009-07-29 13:26 ` Teo En Ming (Zhang Enming)
2009-07-29 13:29 ` Pasi Kärkkäinen
2009-07-29 13:29 ` Teo En Ming (Zhang Enming)
0 siblings, 2 replies; 86+ messages in thread
From: Teo En Ming (Zhang Enming) @ 2009-07-29 13:26 UTC (permalink / raw)
To: pasik; +Cc: 'Boris Derzhavets', xen-devel
But I thought there is a Mac OS X version for Intel architecture?
Regards,
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen [mailto:pasik@iki.fi]
Sent: Wednesday, July 29, 2009 9:24 PM
To: Teo En Ming (Zhang Enming)
Cc: 'Boris Derzhavets'; xen-devel@lists.xensource.com
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Wed, Jul 29, 2009 at 09:07:48PM +0800, Teo En Ming (Zhang Enming) wrote:
> Hi,
>
>
>
> I am looking forward to virtualizing Mac OS X x86 (Intel) version. May I
> know whether it is free or must be purchased?
>
>
>
> If it is free, where is the official download link?
>
OSX is not free.
Also I think the license agreement of OSX forbids you to install it into
anything else than a Mac.
-- Pasi
>
>
> Thank you.
>
>
>
> Regards,
>
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
>
> Republic of Singapore
> Mobile: +65-9648-9798
> MSN: teoenming@hotmail.com
>
> _____
>
> From: xen-devel-bounces@lists.xensource.com
> [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Teo En Ming
> Sent: Wednesday, July 29, 2009 12:20 PM
> To: Boris Derzhavets; 'Pasi Kärkkäinen'
> Cc: xen-devel@lists.xensource.com
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
>
>
> Dear All,
>
>
>
> I have also virtualized Windows Server 2003 Standard Edition 32-bit on Xen
> 3.4.1 RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> operating system.
>
>
>
> Please see screenshots here:
>
>
>
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-server-2
> 003-standard-edition.html
>
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
>
> Republic of Singapore
> Mobile Phone: +65-9648-9798
> MSN: teoenming@hotmail.com
>
>
>
> -----Original Message-----
> From: "Boris Derzhavets" <bderzhavets@yahoo.com>
> To: 'Pasi Kärkkäinen' <pasik@iki.fi>
> Cc: <xen-devel@lists.xensource.com>, "'Teo En Ming'"
> <enming.teo@asiasoftsea.net>
> Date: Wed, 29 Jul 2009 12:25:42 +0800
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
>
> >Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
>
> >You use it to passthrough SCSI or SATA _controller_ (HBA).
>
> Pasi,
>
> I understand that . South Bridge ICH9(10)R is located PCI Bus.
> "lspci -v" gives me :-
>
> 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
> port SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
>
> Subsystem: ASUSTeK Computer Inc. Device 8277
>
> Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 4347
>
> I/O ports at 9c00 [size=8]
>
> I/O ports at 9880 [size=4]
>
> I/O ports at 9800 [size=8]
>
> I/O ports at 9480 [size=4]
>
> I/O ports at 9400 [size=32]
>
> Memory at f9ffe800 (32-bit, non-prefetchable) [size=2K]
>
> Capabilities: [80] MSI: Mask- 64bit- Count=1/16 Enable+
>
> Capabilities: [70] Power Management version 3
>
> Capabilities: [a8] SATA HBA <?>
>
> Capabilities: [b0] Vendor Specific Information <?>
>
> Kernel driver in use: ahci
>
> How to manage afterwards ? Link would be fine.
>
> Thanks.
> Boris.
>
> --- On Tue, 7/28/09, Pasi Kärkkäinen <pasik@iki.fi> wrote:
>
>
> From: Pasi Kärkkäinen <pasik@iki.fi>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
> To: "Boris Derzhavets" <bderzhavets@yahoo.com>
> Cc: xen-devel@lists.xensource.com, "Teo En Ming"
> <enming.teo@asiasoftsea.net>
> Date: Tuesday, July 28, 2009, 10:24 AM
>
> On Tue, Jul 28, 2009 at 06:49:49AM -0700, Boris Derzhavets wrote:
> > >Xen supports PCI device passthrough to paravirtualized domUs without
any
> > > additional hardware support/requirements.
> >
> > It was never my concern. But , i guess it works for SCSI drives , not
> SATA.
> >
>
> Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
>
> You use it to passthrough SCSI or SATA _controller_ (HBA). Or a NIC.
> Or a USB controller. Or a graphics card.
>
> -- Pasi
>
> > Boris.
> >
> > --- On Tue, 7/28/09, Pasi Kärkkäinen < pasik@iki.fi> wrote:
> >
> > From: Pasi Kärkkäinen < pasik@iki.fi>
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
> > To: "Teo En Ming" <enming.teo@asiasoftsea.net >
> > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> xen-devel@lists.xensource.com
> > Date: Tuesday, July 28, 2009, 8:48 AM
> >
> > On Tue, Jul 28, 2009 at 08:27:35PM +0800, Teo En Ming wrote:
> > > Dear Pasi,
> > >
> > > I thought only paravirtualized guests allow PCI devices to be passed
> through
> > > from the Dom 0 host? Fully virtualized guests like Windows are not
able
> to
> > > access PCI devices directly in Dom 0.
> > >
> >
> > Xen supports PCI device passthrough to paravirtualized domUs without any
> > additional hardware support/requirements.
> >
> > PCI device passthrough to HVM domains requires VT-d (iommu) support.
> >
> > > Does Core 2 Duo support Intel VT-d? Or only in Xeons?
> > >
> >
> > VT-d support is in the chipset. Not many chipsets have it yet.. And
there
> > are bugs in the VT-d support in many motherboards..
> >
> > > I am using Xen 3.4.1 testing code right now. Does it support PCI
device
> pass
> > > through?
> > >
> >
> > Yes, I think Xen 3.4.1 has VT-d support. Although the code is still not
> very
> > mature, especially with graphics cards there are a lot of problems.
> >
> > See xen-devel and xen-users archives for more information.
> >
> > -- Pasi
> >
> > > Thank you.
> > >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > > BEng(Hons)(Mechanical Engineering)
> > >
> > > Technical Support Engineer
> > >
> > > Information Technology Department
> > >
> > > Asiasoft Online Pte Ltd
> > >
> > > Tampines Central 1 #04-01 Tampines Plaza
> > >
> > > Singapore 529541
> > >
> > > Republic of Singapore
> > >
> > > Mobile Phone: +65-9648-9798
> > >
> > > MSN: teoenming@hotmail.com
> > >
> > >
> > > -----Original Message-----
> > >
> > > From: Pasi Kärkkäinen < pasik@iki.fi>
> > >
> > > To: "'Teo En Ming'" <enming.teo@asiasoftsea.net >
> > >
> > > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> > > xen-devel@lists.xensource.com
> > >
> > > Date: Tue, 28 Jul 2009 20:32:10 +0800
> > >
> > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS
>
> > > Kernel
> > >
> > >
> > >
> > >
> > > On Tue, Jul 28, 2009 at 07:25:58PM +0800, Teo En Ming wrote:
> > >
> > > > Dear Boris,
> > >
> > > >
> > >
> > > > Any way I can change the emulated display driver in Windows HVM
guest
> to a
> > >
> > >
> > >
> > > > better one for game playing?
> > >
> > > >
> > >
> > >
> > >
> > > You can't really do that. Qemu (used in Xen HVM domains) only provides
> basic
> > >
> > > 2D display adapter, so it's not really suitable for gaming.
> > >
> > >
> > >
> > > If you want to experiment with unstable/development code, you could
try
> VT-d
> > >
> > > to passthrough a graphics adapter (the whole device) to HVM guest.
> > >
> > >
> > >
> > > I think there are also some graphics drivers that operate through the
> > >
> > > network, ie. communicate with dom0 graphics hardware, but I don't have
> any
> > >
> > > links to those.
> > >
> > >
> > >
> > > Xen is mostly a server virtualization software/solution nowadays..
> > >
> > >
> > >
> > > -- Pasi
> > >
> > >
> > >
> > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > >
> > > > BEng(Hons)(Mechanical Engineering)
> > >
> > > >
> > >
> > > > Technical Support Engineer
> > >
> > > >
> > >
> > > > Information Technology Department
> > >
> > > >
> > >
> > > > Asiasoft Online Pte Ltd
> > >
> > > >
> > >
> > > > Tampines Central 1 #04-01 Tampines Plaza
> > >
> > > >
> > >
> > > > Singapore 529541
> > >
> > > >
> > >
> > > > Republic of Singapore
> > >
> > > >
> > >
> > > > Mobile Phone: +65-9648-9798
> > >
> > > >
> > >
> > > > MSN: teoenming@hotmail.com
> > >
> > > >
> > >
> > > >
> > >
> > > > -----Original Message-----
> > >
> > > >
> > >
> > > > From: Boris Derzhavets <bderzhavets@yahoo.com>
> > >
> > > >
> > >
> > > > To: enming.teo@asiasoftsea.net, pasik@iki.fi
> > >
> > > >
> > >
> > > > Cc: xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
> > >
> > > >
> > >
> > > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> PVOPS
> > >
> > > > Kernel
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > It's really exciting ;)
> > >
> > > >
> > >
> > > > Boris.
> > >
> > > >
> > >
> > > > --- On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net >
wrote:
> > >
> > > >
> > >
> > > > From: Teo En Ming <enming.teo@asiasoftsea.net >
> > >
> > > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> PVOPS
> > >
> > > > Kernel
> > >
> > > > To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net >,
> > >
> > > pasik@iki.fi
> > >
> > > > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> > >
> > > > xen-devel@lists.xensource.com
> > >
> > > > Date: Tuesday, July 28, 2009, 7:07 AM
> > >
> > > >
> > >
> > > >
> > >
> > > > Hi,
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0 Kernel
> > >
> > > > 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Please see screenshots here:
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > >
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
>
> > > [
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
>
<http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-
> v> ]
> > >
> > > irtual-machine-on.html
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Can I change the emulated display adapter driver in Windows XP HVM
> > >
> > > > guest under Xen to a better one so that I can play games?
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Thank you!!!
> > >
> > > >
> > >
> > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > >
> > > > BEng(Hons)(Mechanical Engineering)
> > >
> > > >
> > >
> > > > Technical Support Engineer
> > >
> > > >
> > >
> > > > Information Technology Department
> > >
> > > >
> > >
> > > > Asiasoft Online Pte Ltd
> > >
> > > >
> > >
> > > > Tampines Central 1 #04-01 Tampines Plaza
> > >
> > > >
> > >
> > > > Singapore 529541
> > >
> > > >
> > >
> > > > Republic of Singapore
> > >
> > > >
> > >
> > > > Mobile Phone: +65-9648-9798
> > >
> > > >
> > >
> > > > MSN: teoenming@hotmail.com
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > -----Original
> > >
> > > > Message-----
> > >
> > > >
> > >
> > > > From: "Teo En Ming (Zhang Enming)"
> > >
> > > > <enming.teo@asiasoftsea.net >
> > >
> > > >
> > >
> > > > To: < pasik@iki.fi>
> > >
> > > >
> > >
> > > > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> > >
> > > > xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > Date: Tue, 28 Jul 2009 19:13:34 +0800
> > >
> > > >
> > >
> > > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> > >
> > > > PVOPS Kernel
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Dear All,
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > I have managed to virtualize Windows 7 32-bit as a HVM guest on
> > >
> > > > Xen 3.4.1
> > >
> > > >
> > >
> > > > RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> > >
> > > > operating
> > >
> > > >
> > >
> > > > system.
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Please see screenshots here:
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > >
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
>
> > > [
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
>
<http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> i> ]
> > >
> > >
> > >
> > > >
> > >
> > > [
>
<http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> >
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > > [
>
<http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> >
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> ]
> > >
> > > i]
> > >
> > > >
> > >
> > > >
> > >
> > > > rtual-machine-on-xen.html
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > I have uploaded 24 pictures so far at the time of this writing.
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Regards,
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > >
> > > >
> > >
> > > > BEng(Hons)(Mechanical Engineering)
> > >
> > > >
> > >
> > > > Technical Support Engineer
> > >
> > > >
> > >
> > > > Information Technology Department
> > >
> > > >
> > >
> > > > Asiasoft Online Pte Ltd
> > >
> > > >
> > >
> > > > Tampines Central 1 #04-01 Tampines Plaza
> > >
> > > >
> > >
> > > > Singapore 529541
> > >
> > > >
> > >
> > > > Republic of Singapore
> > >
> > > >
> > >
> > > > Mobile: +65-9648-9798
> > >
> > > >
> > >
> > > > MSN: teoenming@hotmail.com
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > -----Original Message-----
> > >
> > > >
> > >
> > > > From: xen-devel-bounces@lists.xensource.com
> > >
> > > >
> > >
> > > > [mailto: xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi
> > >
> > > > Kärkkäinen
> > >
> > > >
> > >
> > > > Sent: Monday, July 27, 2009 11:24 PM
> > >
> > > >
> > >
> > > > To: Teo En Ming
> > >
> > > >
> > >
> > > > Cc: Boris Derzhavets; xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> > >
> > > > Jeremy's PVOPS
> > >
> > > >
> > >
> > > > Kernel
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
> > >
> > > >
> > >
> > > > > Dear Pasi,
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Any idea on what benchmark tools I can use to measure I/O
> > >
> > > > performance of
> > >
> > > >
> > >
> > > > my
> > >
> > > >
> > >
> > > > > virtual machines?
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Well for simple streaming IO tests you can use dd, it supports
> > >
> > > > multiple
> > >
> > > >
> > >
> > > > block sizes, O_DIRECT etc.
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > If you need multithreaded/multiprocess tests, or filesystem IO
> > >
> > > > tests, then
> > >
> > > >
> > >
> > > > you need something more sophisticated.. bonnie++, ltp disktest,
> > >
> > > > fio, iozone
> > >
> > > >
> > >
> > > > etc. Google is your friend.
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > -- Pasi
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > > Thank you.
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > >
> > > >
> > >
> > > > > BEng(Hons)(Mechanical Engineering)
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Technical Support Engineer
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Information Technology Department
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Asiasoft Online Pte Ltd
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Tampines Central 1 #04-01 Tampines Plaza
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Singapore 529541
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Republic of Singapore
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Mobile Phone: +65-9648-9798
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > MSN: teoenming@hotmail.com
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > -----Original Message-----
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > From: Pasi Kärkkäinen < pasik@iki.fi>
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > To: Teo En Ming <enming.teo@asiasoftsea.net >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
> > >
> > > >
> > >
> > > > xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Date: Mon, 27 Jul 2009 18:01:55 +0300
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> > >
> > > > Jeremy's PVOPS
> > >
> > > >
> > >
> > > > > Kernel
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > Dear Boris,
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > Based on your given information, I have managed to
> > >
> > > > configure static IP
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > address inside OpenSolaris UNIX PV guest.
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > These are the two crucial lines:
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
> > >
> > > > /etc/hostname.xnf0
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > echo 192.168.1.102 > /etc/defaultrouter
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > Please see screenshot here:
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
>
> > > [
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> 1> ]
> > >
> > >
> > >
> > > >
> > >
> > > [
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > [
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> ]
> > >
> > > 1]
> > >
> > > >
> > >
> > > >
> > >
> > > > 600-h/03.jpeg
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > [
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > [
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> ]
> > >
> > >
> > >
> > > >
> > >
> > > [
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > [
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > ]
> > >
> > > ]
> > >
> > > >
> > >
> > > >
> > >
> > > > 1600-h/03.jpeg]
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > May I know whether there are any PV device drivers for
> > >
> > > > me to install to
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > improve PV guests' performance? What are the
> > >
> > > > recommended benchmark tools
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > > to
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > measure I/O performance of PV guests?
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > PV guest doesn't need any additional drivers. Like the name
> > >
> > > > PV says, it's
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > paravirtual, and uses the optimized drivers/interfaces
> > >
> > > > out-of-the-box.
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > -- Pasi
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > _______________________________________________
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Xen-devel mailing list
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]
> > >
> > > > [ <http://lists.xensource.com/xen-devel>
> http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]]
> > >
> > > >
> > >
> > > > [ http://lists.xensource.com/xen-devel
> <http://lists.xensource.com/xen-devel>
> > > [http://lists.xensource.com/xen-devel]
> > >
> > > > [ <http://lists.xensource.com/xen-devel>
> http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]]]
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > _______________________________________________
> > >
> > > >
> > >
> > > > Xen-devel mailing list
> > >
> > > >
> > >
> > > > Xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]
> > >
> > > [http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]]
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > No virus found in this incoming message.
> > >
> > > >
> > >
> > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> [http://www.avg.com/
> > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > >
> > > >
> > >
> > > > Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date:
> > >
> > > > 07/26/09
> > >
> > > >
> > >
> > > > 17:59:00
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > No virus found in this outgoing message.
> > >
> > > >
> > >
> > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> [http://www.avg.com/
> > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > >
> > > >
> > >
> > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > >
> > > > 07/27/09
> > >
> > > >
> > >
> > > > 17:59:00
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > _______________________________________________
> > >
> > > >
> > >
> > > > Xen-devel mailing list
> > >
> > > >
> > >
> > > > Xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]
> > >
> > > [http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]]
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > No virus found in this incoming message.
> > >
> > > >
> > >
> > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> [http://www.avg.com/
> > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > >
> > > >
> > >
> > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > >
> > > > 07/27/09
> > >
> > > >
> > >
> > > > 17:59:00
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > No virus found in this outgoing message.
> > >
> > > >
> > >
> > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> [http://www.avg.com/
> > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > >
> > > >
> > >
> > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > >
> > > > 07/27/09
> > >
> > > >
> > >
> > > > 17:59:00
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > _______________________________________________
> > >
> > > >
> > >
> > > > Xen-devel mailing list
> > >
> > > >
> > >
> > > > Xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]
> > >
> > > [http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]]
> > >
> > >
> > >
> > > _______________________________________________
> > >
> > > Xen-devel mailing list
> > >
> > > Xen-devel@lists.xensource.com
> > >
> > > http://lists.xensource.com/xen-devel [
> <http://lists.xensource.com/xen-devel>
> http://lists.xensource.com/xen-devel]
> > >
> > >
> > >
> > > No virus found in this incoming message.
> > >
> > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> 07/27/09
> > >
> > > 17:59:00
> > >
> > >
> > >
> > > No virus found in this outgoing message.
> > >
> > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> 07/27/09
> > >
> > > 17:59:00
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > >
> > > Xen-devel mailing list
> > >
> > > Xen-devel@lists.xensource.com
> > >
> > > http://lists.xensource.com/xen-devel [
> <http://lists.xensource.com/xen-devel>
> http://lists.xensource.com/xen-devel]
> >
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xensource.com
> > http://lists.xensource.com/xen-devel
> >
> >
> >
> >
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
>
>
> Checked by AVG - www.avg.com
> Version: 8.5.375 / Virus Database: 270.13.33/2267 - Release Date: 07/27/09
> 17:59:00
>
> Checked by AVG - www.avg.com
> Version: 8.5.375 / Virus Database: 270.13.33/2267 - Release Date: 07/28/09
> 17:58:00
>
>
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.35/2269 - Release Date: 07/28/09
17:58:00
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.35/2269 - Release Date: 07/28/09
17:58:00
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-29 13:26 ` Teo En Ming (Zhang Enming)
@ 2009-07-29 13:29 ` Pasi Kärkkäinen
2009-07-29 13:30 ` Teo En Ming (Zhang Enming)
2009-07-29 13:29 ` Teo En Ming (Zhang Enming)
1 sibling, 1 reply; 86+ messages in thread
From: Pasi Kärkkäinen @ 2009-07-29 13:29 UTC (permalink / raw)
To: Teo En Ming (Zhang Enming); +Cc: 'Boris Derzhavets', xen-devel
On Wed, Jul 29, 2009 at 09:26:54PM +0800, Teo En Ming (Zhang Enming) wrote:
> But I thought there is a Mac OS X version for Intel architecture?
>
Yes, there is. It's for Intel based Apple Macs.
-- Pasi
> Regards,
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
> Technical Support Engineer
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Republic of Singapore
> Mobile: +65-9648-9798
> MSN: teoenming@hotmail.com
> -----Original Message-----
> From: Pasi Kärkkäinen [mailto:pasik@iki.fi]
> Sent: Wednesday, July 29, 2009 9:24 PM
> To: Teo En Ming (Zhang Enming)
> Cc: 'Boris Derzhavets'; xen-devel@lists.xensource.com
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
> On Wed, Jul 29, 2009 at 09:07:48PM +0800, Teo En Ming (Zhang Enming) wrote:
> > Hi,
> >
> >
> >
> > I am looking forward to virtualizing Mac OS X x86 (Intel) version. May I
> > know whether it is free or must be purchased?
> >
> >
> >
> > If it is free, where is the official download link?
> >
>
> OSX is not free.
>
> Also I think the license agreement of OSX forbids you to install it into
> anything else than a Mac.
>
> -- Pasi
>
> >
> >
> > Thank you.
> >
> >
> >
> > Regards,
> >
> >
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > BEng(Hons)(Mechanical Engineering)
> >
> > Technical Support Engineer
> >
> > Information Technology Department
> > Asiasoft Online Pte Ltd
> > Tampines Central 1 #04-01 Tampines Plaza
> > Singapore 529541
> >
> > Republic of Singapore
> > Mobile: +65-9648-9798
> > MSN: teoenming@hotmail.com
> >
> > _____
> >
> > From: xen-devel-bounces@lists.xensource.com
> > [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Teo En Ming
> > Sent: Wednesday, July 29, 2009 12:20 PM
> > To: Boris Derzhavets; 'Pasi Kärkkäinen'
> > Cc: xen-devel@lists.xensource.com
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> > Kernel
> >
> >
> >
> > Dear All,
> >
> >
> >
> > I have also virtualized Windows Server 2003 Standard Edition 32-bit on Xen
> > 3.4.1 RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> > operating system.
> >
> >
> >
> > Please see screenshots here:
> >
> >
> >
> >
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-server-2
> > 003-standard-edition.html
> >
> >
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > BEng(Hons)(Mechanical Engineering)
> >
> > Technical Support Engineer
> >
> > Information Technology Department
> > Asiasoft Online Pte Ltd
> > Tampines Central 1 #04-01 Tampines Plaza
> > Singapore 529541
> >
> > Republic of Singapore
> > Mobile Phone: +65-9648-9798
> > MSN: teoenming@hotmail.com
> >
> >
> >
> > -----Original Message-----
> > From: "Boris Derzhavets" <bderzhavets@yahoo.com>
> > To: 'Pasi Kärkkäinen' <pasik@iki.fi>
> > Cc: <xen-devel@lists.xensource.com>, "'Teo En Ming'"
> > <enming.teo@asiasoftsea.net>
> > Date: Wed, 29 Jul 2009 12:25:42 +0800
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> > Kernel
> >
> >
> > >Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
> >
> > >You use it to passthrough SCSI or SATA _controller_ (HBA).
> >
> > Pasi,
> >
> > I understand that . South Bridge ICH9(10)R is located PCI Bus.
> > "lspci -v" gives me :-
> >
> > 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
> > port SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
> >
> > Subsystem: ASUSTeK Computer Inc. Device 8277
> >
> > Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 4347
> >
> > I/O ports at 9c00 [size=8]
> >
> > I/O ports at 9880 [size=4]
> >
> > I/O ports at 9800 [size=8]
> >
> > I/O ports at 9480 [size=4]
> >
> > I/O ports at 9400 [size=32]
> >
> > Memory at f9ffe800 (32-bit, non-prefetchable) [size=2K]
> >
> > Capabilities: [80] MSI: Mask- 64bit- Count=1/16 Enable+
> >
> > Capabilities: [70] Power Management version 3
> >
> > Capabilities: [a8] SATA HBA <?>
> >
> > Capabilities: [b0] Vendor Specific Information <?>
> >
> > Kernel driver in use: ahci
> >
> > How to manage afterwards ? Link would be fine.
> >
> > Thanks.
> > Boris.
> >
> > --- On Tue, 7/28/09, Pasi Kärkkäinen <pasik@iki.fi> wrote:
> >
> >
> > From: Pasi Kärkkäinen <pasik@iki.fi>
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> > Kernel
> > To: "Boris Derzhavets" <bderzhavets@yahoo.com>
> > Cc: xen-devel@lists.xensource.com, "Teo En Ming"
> > <enming.teo@asiasoftsea.net>
> > Date: Tuesday, July 28, 2009, 10:24 AM
> >
> > On Tue, Jul 28, 2009 at 06:49:49AM -0700, Boris Derzhavets wrote:
> > > >Xen supports PCI device passthrough to paravirtualized domUs without
> any
> > > > additional hardware support/requirements.
> > >
> > > It was never my concern. But , i guess it works for SCSI drives , not
> > SATA.
> > >
> >
> > Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
> >
> > You use it to passthrough SCSI or SATA _controller_ (HBA). Or a NIC.
> > Or a USB controller. Or a graphics card.
> >
> > -- Pasi
> >
> > > Boris.
> > >
> > > --- On Tue, 7/28/09, Pasi Kärkkäinen < pasik@iki.fi> wrote:
> > >
> > > From: Pasi Kärkkäinen < pasik@iki.fi>
> > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> > Kernel
> > > To: "Teo En Ming" <enming.teo@asiasoftsea.net >
> > > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> > xen-devel@lists.xensource.com
> > > Date: Tuesday, July 28, 2009, 8:48 AM
> > >
> > > On Tue, Jul 28, 2009 at 08:27:35PM +0800, Teo En Ming wrote:
> > > > Dear Pasi,
> > > >
> > > > I thought only paravirtualized guests allow PCI devices to be passed
> > through
> > > > from the Dom 0 host? Fully virtualized guests like Windows are not
> able
> > to
> > > > access PCI devices directly in Dom 0.
> > > >
> > >
> > > Xen supports PCI device passthrough to paravirtualized domUs without any
>
> > > additional hardware support/requirements.
> > >
> > > PCI device passthrough to HVM domains requires VT-d (iommu) support.
> > >
> > > > Does Core 2 Duo support Intel VT-d? Or only in Xeons?
> > > >
> > >
> > > VT-d support is in the chipset. Not many chipsets have it yet.. And
> there
> > > are bugs in the VT-d support in many motherboards..
> > >
> > > > I am using Xen 3.4.1 testing code right now. Does it support PCI
> device
> > pass
> > > > through?
> > > >
> > >
> > > Yes, I think Xen 3.4.1 has VT-d support. Although the code is still not
> > very
> > > mature, especially with graphics cards there are a lot of problems.
> > >
> > > See xen-devel and xen-users archives for more information.
> > >
> > > -- Pasi
> > >
> > > > Thank you.
> > > >
> > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > > > BEng(Hons)(Mechanical Engineering)
> > > >
> > > > Technical Support Engineer
> > > >
> > > > Information Technology Department
> > > >
> > > > Asiasoft Online Pte Ltd
> > > >
> > > > Tampines Central 1 #04-01 Tampines Plaza
> > > >
> > > > Singapore 529541
> > > >
> > > > Republic of Singapore
> > > >
> > > > Mobile Phone: +65-9648-9798
> > > >
> > > > MSN: teoenming@hotmail.com
> > > >
> > > >
> > > > -----Original Message-----
> > > >
> > > > From: Pasi Kärkkäinen < pasik@iki.fi>
> > > >
> > > > To: "'Teo En Ming'" <enming.teo@asiasoftsea.net >
> > > >
> > > > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> > > > xen-devel@lists.xensource.com
> > > >
> > > > Date: Tue, 28 Jul 2009 20:32:10 +0800
> > > >
> > > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> PVOPS
> >
> > > > Kernel
> > > >
> > > >
> > > >
> > > >
> > > > On Tue, Jul 28, 2009 at 07:25:58PM +0800, Teo En Ming wrote:
> > > >
> > > > > Dear Boris,
> > > >
> > > > >
> > > >
> > > > > Any way I can change the emulated display driver in Windows HVM
> guest
> > to a
> > > >
> > > >
> > > >
> > > > > better one for game playing?
> > > >
> > > > >
> > > >
> > > >
> > > >
> > > > You can't really do that. Qemu (used in Xen HVM domains) only provides
> > basic
> > > >
> > > > 2D display adapter, so it's not really suitable for gaming.
> > > >
> > > >
> > > >
> > > > If you want to experiment with unstable/development code, you could
> try
> > VT-d
> > > >
> > > > to passthrough a graphics adapter (the whole device) to HVM guest.
> > > >
> > > >
> > > >
> > > > I think there are also some graphics drivers that operate through the
> > > >
> > > > network, ie. communicate with dom0 graphics hardware, but I don't have
> > any
> > > >
> > > > links to those.
> > > >
> > > >
> > > >
> > > > Xen is mostly a server virtualization software/solution nowadays..
> > > >
> > > >
> > > >
> > > > -- Pasi
> > > >
> > > >
> > > >
> > > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > > >
> > > > > BEng(Hons)(Mechanical Engineering)
> > > >
> > > > >
> > > >
> > > > > Technical Support Engineer
> > > >
> > > > >
> > > >
> > > > > Information Technology Department
> > > >
> > > > >
> > > >
> > > > > Asiasoft Online Pte Ltd
> > > >
> > > > >
> > > >
> > > > > Tampines Central 1 #04-01 Tampines Plaza
> > > >
> > > > >
> > > >
> > > > > Singapore 529541
> > > >
> > > > >
> > > >
> > > > > Republic of Singapore
> > > >
> > > > >
> > > >
> > > > > Mobile Phone: +65-9648-9798
> > > >
> > > > >
> > > >
> > > > > MSN: teoenming@hotmail.com
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > -----Original Message-----
> > > >
> > > > >
> > > >
> > > > > From: Boris Derzhavets <bderzhavets@yahoo.com>
> > > >
> > > > >
> > > >
> > > > > To: enming.teo@asiasoftsea.net, pasik@iki.fi
> > > >
> > > > >
> > > >
> > > > > Cc: xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
> > > >
> > > > >
> > > >
> > > > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> > PVOPS
> > > >
> > > > > Kernel
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > It's really exciting ;)
> > > >
> > > > >
> > > >
> > > > > Boris.
> > > >
> > > > >
> > > >
> > > > > --- On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net >
> wrote:
> > > >
> > > > >
> > > >
> > > > > From: Teo En Ming <enming.teo@asiasoftsea.net >
> > > >
> > > > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> > PVOPS
> > > >
> > > > > Kernel
> > > >
> > > > > To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net >,
> > > >
> > > > pasik@iki.fi
> > > >
> > > > > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> > > >
> > > > > xen-devel@lists.xensource.com
> > > >
> > > > > Date: Tuesday, July 28, 2009, 7:07 AM
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Hi,
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0 Kernel
> > > >
> > > > > 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Please see screenshots here:
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > >
> >
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
> >
> > > > [
> >
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
> >
> <http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-
> > v> ]
> > > >
> > > > irtual-machine-on.html
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Can I change the emulated display adapter driver in Windows XP HVM
> > > >
> > > > > guest under Xen to a better one so that I can play games?
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Thank you!!!
> > > >
> > > > >
> > > >
> > > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > > >
> > > > > BEng(Hons)(Mechanical Engineering)
> > > >
> > > > >
> > > >
> > > > > Technical Support Engineer
> > > >
> > > > >
> > > >
> > > > > Information Technology Department
> > > >
> > > > >
> > > >
> > > > > Asiasoft Online Pte Ltd
> > > >
> > > > >
> > > >
> > > > > Tampines Central 1 #04-01 Tampines Plaza
> > > >
> > > > >
> > > >
> > > > > Singapore 529541
> > > >
> > > > >
> > > >
> > > > > Republic of Singapore
> > > >
> > > > >
> > > >
> > > > > Mobile Phone: +65-9648-9798
> > > >
> > > > >
> > > >
> > > > > MSN: teoenming@hotmail.com
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > -----Original
> > > >
> > > > > Message-----
> > > >
> > > > >
> > > >
> > > > > From: "Teo En Ming (Zhang Enming)"
> > > >
> > > > > <enming.teo@asiasoftsea.net >
> > > >
> > > > >
> > > >
> > > > > To: < pasik@iki.fi>
> > > >
> > > > >
> > > >
> > > > > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> > > >
> > > > > xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > Date: Tue, 28 Jul 2009 19:13:34 +0800
> > > >
> > > > >
> > > >
> > > > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> > > >
> > > > > PVOPS Kernel
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Dear All,
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > I have managed to virtualize Windows 7 32-bit as a HVM guest on
> > > >
> > > > > Xen 3.4.1
> > > >
> > > > >
> > > >
> > > > > RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> > > >
> > > > > operating
> > > >
> > > > >
> > > >
> > > > > system.
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Please see screenshots here:
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > >
> >
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
> >
> > > > [
> >
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
> >
> <http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > i> ]
> > > >
> > > >
> > > >
> > > > >
> > > >
> > > > [
> >
> <http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > >
> >
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > > > [
> >
> <http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > >
> >
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > ]
> > > >
> > > > i]
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > rtual-machine-on-xen.html
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > I have uploaded 24 pictures so far at the time of this writing.
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Regards,
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > > >
> > > > >
> > > >
> > > > > BEng(Hons)(Mechanical Engineering)
> > > >
> > > > >
> > > >
> > > > > Technical Support Engineer
> > > >
> > > > >
> > > >
> > > > > Information Technology Department
> > > >
> > > > >
> > > >
> > > > > Asiasoft Online Pte Ltd
> > > >
> > > > >
> > > >
> > > > > Tampines Central 1 #04-01 Tampines Plaza
> > > >
> > > > >
> > > >
> > > > > Singapore 529541
> > > >
> > > > >
> > > >
> > > > > Republic of Singapore
> > > >
> > > > >
> > > >
> > > > > Mobile: +65-9648-9798
> > > >
> > > > >
> > > >
> > > > > MSN: teoenming@hotmail.com
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > -----Original Message-----
> > > >
> > > > >
> > > >
> > > > > From: xen-devel-bounces@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > [mailto: xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi
> > > >
> > > > > Kärkkäinen
> > > >
> > > > >
> > > >
> > > > > Sent: Monday, July 27, 2009 11:24 PM
> > > >
> > > > >
> > > >
> > > > > To: Teo En Ming
> > > >
> > > > >
> > > >
> > > > > Cc: Boris Derzhavets; xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> > > >
> > > > > Jeremy's PVOPS
> > > >
> > > > >
> > > >
> > > > > Kernel
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
> > > >
> > > > >
> > > >
> > > > > > Dear Pasi,
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Any idea on what benchmark tools I can use to measure I/O
> > > >
> > > > > performance of
> > > >
> > > > >
> > > >
> > > > > my
> > > >
> > > > >
> > > >
> > > > > > virtual machines?
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Well for simple streaming IO tests you can use dd, it supports
> > > >
> > > > > multiple
> > > >
> > > > >
> > > >
> > > > > block sizes, O_DIRECT etc.
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > If you need multithreaded/multiprocess tests, or filesystem IO
> > > >
> > > > > tests, then
> > > >
> > > > >
> > > >
> > > > > you need something more sophisticated.. bonnie++, ltp disktest,
> > > >
> > > > > fio, iozone
> > > >
> > > > >
> > > >
> > > > > etc. Google is your friend.
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > -- Pasi
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > > Thank you.
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > > >
> > > > >
> > > >
> > > > > > BEng(Hons)(Mechanical Engineering)
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Technical Support Engineer
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Information Technology Department
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Asiasoft Online Pte Ltd
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Tampines Central 1 #04-01 Tampines Plaza
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Singapore 529541
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Republic of Singapore
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Mobile Phone: +65-9648-9798
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > MSN: teoenming@hotmail.com
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > -----Original Message-----
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > From: Pasi Kärkkäinen < pasik@iki.fi>
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > To: Teo En Ming <enming.teo@asiasoftsea.net >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
> > > >
> > > > >
> > > >
> > > > > xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Date: Mon, 27 Jul 2009 18:01:55 +0300
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> > > >
> > > > > Jeremy's PVOPS
> > > >
> > > > >
> > > >
> > > > > > Kernel
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > Dear Boris,
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > Based on your given information, I have managed to
> > > >
> > > > > configure static IP
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > address inside OpenSolaris UNIX PV guest.
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > These are the two crucial lines:
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
> > > >
> > > > > /etc/hostname.xnf0
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > echo 192.168.1.102 > /etc/defaultrouter
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > Please see screenshot here:
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > >
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
> >
> > > > [
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
> >
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > 1> ]
> > > >
> > > >
> > > >
> > > > >
> > > >
> > > > [
> >
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > >
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > > [
> >
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > >
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > ]
> > > >
> > > > 1]
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > 600-h/03.jpeg
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > [
> >
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > >
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > > [
> >
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > >
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > ]
> > > >
> > > >
> > > >
> > > > >
> > > >
> > > > [
> >
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > >
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > > [
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > ]
> > > >
> > > > ]
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > 1600-h/03.jpeg]
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > May I know whether there are any PV device drivers for
> > > >
> > > > > me to install to
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > improve PV guests' performance? What are the
> > > >
> > > > > recommended benchmark tools
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > > to
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > measure I/O performance of PV guests?
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > PV guest doesn't need any additional drivers. Like the name
> > > >
> > > > > PV says, it's
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > paravirtual, and uses the optimized drivers/interfaces
> > > >
> > > > > out-of-the-box.
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > -- Pasi
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > _______________________________________________
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Xen-devel mailing list
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]
> > > >
> > > > > [ <http://lists.xensource.com/xen-devel>
> > http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]]
> > > >
> > > > >
> > > >
> > > > > [ http://lists.xensource.com/xen-devel
> > <http://lists.xensource.com/xen-devel>
> > > > [http://lists.xensource.com/xen-devel]
> > > >
> > > > > [ <http://lists.xensource.com/xen-devel>
> > http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]]]
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > _______________________________________________
> > > >
> > > > >
> > > >
> > > > > Xen-devel mailing list
> > > >
> > > > >
> > > >
> > > > > Xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]
> > > >
> > > > [http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]]
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > No virus found in this incoming message.
> > > >
> > > > >
> > > >
> > > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > [http://www.avg.com/
> > > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > > >
> > > > >
> > > >
> > > > > Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date:
> > > >
> > > > > 07/26/09
> > > >
> > > > >
> > > >
> > > > > 17:59:00
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > No virus found in this outgoing message.
> > > >
> > > > >
> > > >
> > > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > [http://www.avg.com/
> > > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > > >
> > > > >
> > > >
> > > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > > >
> > > > > 07/27/09
> > > >
> > > > >
> > > >
> > > > > 17:59:00
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > _______________________________________________
> > > >
> > > > >
> > > >
> > > > > Xen-devel mailing list
> > > >
> > > > >
> > > >
> > > > > Xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]
> > > >
> > > > [http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]]
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > No virus found in this incoming message.
> > > >
> > > > >
> > > >
> > > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > [http://www.avg.com/
> > > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > > >
> > > > >
> > > >
> > > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > > >
> > > > > 07/27/09
> > > >
> > > > >
> > > >
> > > > > 17:59:00
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > No virus found in this outgoing message.
> > > >
> > > > >
> > > >
> > > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > [http://www.avg.com/
> > > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > > >
> > > > >
> > > >
> > > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > > >
> > > > > 07/27/09
> > > >
> > > > >
> > > >
> > > > > 17:59:00
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > _______________________________________________
> > > >
> > > > >
> > > >
> > > > > Xen-devel mailing list
> > > >
> > > > >
> > > >
> > > > > Xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]
> > > >
> > > > [http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]]
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > >
> > > > Xen-devel mailing list
> > > >
> > > > Xen-devel@lists.xensource.com
> > > >
> > > > http://lists.xensource.com/xen-devel [
> > <http://lists.xensource.com/xen-devel>
> > http://lists.xensource.com/xen-devel]
> > > >
> > > >
> > > >
> > > > No virus found in this incoming message.
> > > >
> > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > > >
> > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > 07/27/09
> > > >
> > > > 17:59:00
> > > >
> > > >
> > > >
> > > > No virus found in this outgoing message.
> > > >
> > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > > >
> > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > 07/27/09
> > > >
> > > > 17:59:00
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > >
> > > > Xen-devel mailing list
> > > >
> > > > Xen-devel@lists.xensource.com
> > > >
> > > > http://lists.xensource.com/xen-devel [
> > <http://lists.xensource.com/xen-devel>
> > http://lists.xensource.com/xen-devel]
> > >
> > > _______________________________________________
> > > Xen-devel mailing list
> > > Xen-devel@lists.xensource.com
> > > http://lists.xensource.com/xen-devel
> > >
> > >
> > >
> > >
> >
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xensource.com
> > http://lists.xensource.com/xen-devel
> >
> >
> >
> > Checked by AVG - www.avg.com
> > Version: 8.5.375 / Virus Database: 270.13.33/2267 - Release Date: 07/27/09
> > 17:59:00
> >
> > Checked by AVG - www.avg.com
> > Version: 8.5.375 / Virus Database: 270.13.33/2267 - Release Date: 07/28/09
> > 17:58:00
> >
> >
>
> Checked by AVG - www.avg.com
> Version: 8.5.375 / Virus Database: 270.13.35/2269 - Release Date: 07/28/09
> 17:58:00
>
> Checked by AVG - www.avg.com
> Version: 8.5.375 / Virus Database: 270.13.35/2269 - Release Date: 07/28/09
> 17:58:00
>
>
^ permalink raw reply [flat|nested] 86+ messages in thread
* RE: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-29 13:26 ` Teo En Ming (Zhang Enming)
2009-07-29 13:29 ` Pasi Kärkkäinen
@ 2009-07-29 13:29 ` Teo En Ming (Zhang Enming)
2009-07-29 13:32 ` Pasi Kärkkäinen
1 sibling, 1 reply; 86+ messages in thread
From: Teo En Ming (Zhang Enming) @ 2009-07-29 13:29 UTC (permalink / raw)
To: enming.teo, pasik; +Cc: 'Boris Derzhavets', xen-devel
We have the official Mac OS X 10.5 Install Discs 1 and 2 in our company. But
it is for MAC computers only, not Intel architecture.
Regards,
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: xen-devel-bounces@lists.xensource.com
[mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Teo En Ming
(Zhang Enming)
Sent: Wednesday, July 29, 2009 9:27 PM
To: pasik@iki.fi
Cc: 'Boris Derzhavets'; xen-devel@lists.xensource.com
Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
But I thought there is a Mac OS X version for Intel architecture?
Regards,
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen [mailto:pasik@iki.fi]
Sent: Wednesday, July 29, 2009 9:24 PM
To: Teo En Ming (Zhang Enming)
Cc: 'Boris Derzhavets'; xen-devel@lists.xensource.com
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Wed, Jul 29, 2009 at 09:07:48PM +0800, Teo En Ming (Zhang Enming) wrote:
> Hi,
>
>
>
> I am looking forward to virtualizing Mac OS X x86 (Intel) version. May I
> know whether it is free or must be purchased?
>
>
>
> If it is free, where is the official download link?
>
OSX is not free.
Also I think the license agreement of OSX forbids you to install it into
anything else than a Mac.
-- Pasi
>
>
> Thank you.
>
>
>
> Regards,
>
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
>
> Republic of Singapore
> Mobile: +65-9648-9798
> MSN: teoenming@hotmail.com
>
> _____
>
> From: xen-devel-bounces@lists.xensource.com
> [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Teo En Ming
> Sent: Wednesday, July 29, 2009 12:20 PM
> To: Boris Derzhavets; 'Pasi Kärkkäinen'
> Cc: xen-devel@lists.xensource.com
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
>
>
> Dear All,
>
>
>
> I have also virtualized Windows Server 2003 Standard Edition 32-bit on Xen
> 3.4.1 RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> operating system.
>
>
>
> Please see screenshots here:
>
>
>
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-server-2
> 003-standard-edition.html
>
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
>
> Technical Support Engineer
>
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
>
> Republic of Singapore
> Mobile Phone: +65-9648-9798
> MSN: teoenming@hotmail.com
>
>
>
> -----Original Message-----
> From: "Boris Derzhavets" <bderzhavets@yahoo.com>
> To: 'Pasi Kärkkäinen' <pasik@iki.fi>
> Cc: <xen-devel@lists.xensource.com>, "'Teo En Ming'"
> <enming.teo@asiasoftsea.net>
> Date: Wed, 29 Jul 2009 12:25:42 +0800
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
>
> >Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
>
> >You use it to passthrough SCSI or SATA _controller_ (HBA).
>
> Pasi,
>
> I understand that . South Bridge ICH9(10)R is located PCI Bus.
> "lspci -v" gives me :-
>
> 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
> port SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
>
> Subsystem: ASUSTeK Computer Inc. Device 8277
>
> Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 4347
>
> I/O ports at 9c00 [size=8]
>
> I/O ports at 9880 [size=4]
>
> I/O ports at 9800 [size=8]
>
> I/O ports at 9480 [size=4]
>
> I/O ports at 9400 [size=32]
>
> Memory at f9ffe800 (32-bit, non-prefetchable) [size=2K]
>
> Capabilities: [80] MSI: Mask- 64bit- Count=1/16 Enable+
>
> Capabilities: [70] Power Management version 3
>
> Capabilities: [a8] SATA HBA <?>
>
> Capabilities: [b0] Vendor Specific Information <?>
>
> Kernel driver in use: ahci
>
> How to manage afterwards ? Link would be fine.
>
> Thanks.
> Boris.
>
> --- On Tue, 7/28/09, Pasi Kärkkäinen <pasik@iki.fi> wrote:
>
>
> From: Pasi Kärkkäinen <pasik@iki.fi>
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
> To: "Boris Derzhavets" <bderzhavets@yahoo.com>
> Cc: xen-devel@lists.xensource.com, "Teo En Ming"
> <enming.teo@asiasoftsea.net>
> Date: Tuesday, July 28, 2009, 10:24 AM
>
> On Tue, Jul 28, 2009 at 06:49:49AM -0700, Boris Derzhavets wrote:
> > >Xen supports PCI device passthrough to paravirtualized domUs without
any
> > > additional hardware support/requirements.
> >
> > It was never my concern. But , i guess it works for SCSI drives , not
> SATA.
> >
>
> Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
>
> You use it to passthrough SCSI or SATA _controller_ (HBA). Or a NIC.
> Or a USB controller. Or a graphics card.
>
> -- Pasi
>
> > Boris.
> >
> > --- On Tue, 7/28/09, Pasi Kärkkäinen < pasik@iki.fi> wrote:
> >
> > From: Pasi Kärkkäinen < pasik@iki.fi>
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
> > To: "Teo En Ming" <enming.teo@asiasoftsea.net >
> > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> xen-devel@lists.xensource.com
> > Date: Tuesday, July 28, 2009, 8:48 AM
> >
> > On Tue, Jul 28, 2009 at 08:27:35PM +0800, Teo En Ming wrote:
> > > Dear Pasi,
> > >
> > > I thought only paravirtualized guests allow PCI devices to be passed
> through
> > > from the Dom 0 host? Fully virtualized guests like Windows are not
able
> to
> > > access PCI devices directly in Dom 0.
> > >
> >
> > Xen supports PCI device passthrough to paravirtualized domUs without any
> > additional hardware support/requirements.
> >
> > PCI device passthrough to HVM domains requires VT-d (iommu) support.
> >
> > > Does Core 2 Duo support Intel VT-d? Or only in Xeons?
> > >
> >
> > VT-d support is in the chipset. Not many chipsets have it yet.. And
there
> > are bugs in the VT-d support in many motherboards..
> >
> > > I am using Xen 3.4.1 testing code right now. Does it support PCI
device
> pass
> > > through?
> > >
> >
> > Yes, I think Xen 3.4.1 has VT-d support. Although the code is still not
> very
> > mature, especially with graphics cards there are a lot of problems.
> >
> > See xen-devel and xen-users archives for more information.
> >
> > -- Pasi
> >
> > > Thank you.
> > >
> > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > > BEng(Hons)(Mechanical Engineering)
> > >
> > > Technical Support Engineer
> > >
> > > Information Technology Department
> > >
> > > Asiasoft Online Pte Ltd
> > >
> > > Tampines Central 1 #04-01 Tampines Plaza
> > >
> > > Singapore 529541
> > >
> > > Republic of Singapore
> > >
> > > Mobile Phone: +65-9648-9798
> > >
> > > MSN: teoenming@hotmail.com
> > >
> > >
> > > -----Original Message-----
> > >
> > > From: Pasi Kärkkäinen < pasik@iki.fi>
> > >
> > > To: "'Teo En Ming'" <enming.teo@asiasoftsea.net >
> > >
> > > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> > > xen-devel@lists.xensource.com
> > >
> > > Date: Tue, 28 Jul 2009 20:32:10 +0800
> > >
> > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS
>
> > > Kernel
> > >
> > >
> > >
> > >
> > > On Tue, Jul 28, 2009 at 07:25:58PM +0800, Teo En Ming wrote:
> > >
> > > > Dear Boris,
> > >
> > > >
> > >
> > > > Any way I can change the emulated display driver in Windows HVM
guest
> to a
> > >
> > >
> > >
> > > > better one for game playing?
> > >
> > > >
> > >
> > >
> > >
> > > You can't really do that. Qemu (used in Xen HVM domains) only provides
> basic
> > >
> > > 2D display adapter, so it's not really suitable for gaming.
> > >
> > >
> > >
> > > If you want to experiment with unstable/development code, you could
try
> VT-d
> > >
> > > to passthrough a graphics adapter (the whole device) to HVM guest.
> > >
> > >
> > >
> > > I think there are also some graphics drivers that operate through the
> > >
> > > network, ie. communicate with dom0 graphics hardware, but I don't have
> any
> > >
> > > links to those.
> > >
> > >
> > >
> > > Xen is mostly a server virtualization software/solution nowadays..
> > >
> > >
> > >
> > > -- Pasi
> > >
> > >
> > >
> > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > >
> > > > BEng(Hons)(Mechanical Engineering)
> > >
> > > >
> > >
> > > > Technical Support Engineer
> > >
> > > >
> > >
> > > > Information Technology Department
> > >
> > > >
> > >
> > > > Asiasoft Online Pte Ltd
> > >
> > > >
> > >
> > > > Tampines Central 1 #04-01 Tampines Plaza
> > >
> > > >
> > >
> > > > Singapore 529541
> > >
> > > >
> > >
> > > > Republic of Singapore
> > >
> > > >
> > >
> > > > Mobile Phone: +65-9648-9798
> > >
> > > >
> > >
> > > > MSN: teoenming@hotmail.com
> > >
> > > >
> > >
> > > >
> > >
> > > > -----Original Message-----
> > >
> > > >
> > >
> > > > From: Boris Derzhavets <bderzhavets@yahoo.com>
> > >
> > > >
> > >
> > > > To: enming.teo@asiasoftsea.net, pasik@iki.fi
> > >
> > > >
> > >
> > > > Cc: xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
> > >
> > > >
> > >
> > > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> PVOPS
> > >
> > > > Kernel
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > It's really exciting ;)
> > >
> > > >
> > >
> > > > Boris.
> > >
> > > >
> > >
> > > > --- On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net >
wrote:
> > >
> > > >
> > >
> > > > From: Teo En Ming <enming.teo@asiasoftsea.net >
> > >
> > > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> PVOPS
> > >
> > > > Kernel
> > >
> > > > To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net >,
> > >
> > > pasik@iki.fi
> > >
> > > > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> > >
> > > > xen-devel@lists.xensource.com
> > >
> > > > Date: Tuesday, July 28, 2009, 7:07 AM
> > >
> > > >
> > >
> > > >
> > >
> > > > Hi,
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0 Kernel
> > >
> > > > 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Please see screenshots here:
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > >
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
>
> > > [
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
>
<http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-
> v> ]
> > >
> > > irtual-machine-on.html
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Can I change the emulated display adapter driver in Windows XP HVM
> > >
> > > > guest under Xen to a better one so that I can play games?
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Thank you!!!
> > >
> > > >
> > >
> > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > >
> > > > BEng(Hons)(Mechanical Engineering)
> > >
> > > >
> > >
> > > > Technical Support Engineer
> > >
> > > >
> > >
> > > > Information Technology Department
> > >
> > > >
> > >
> > > > Asiasoft Online Pte Ltd
> > >
> > > >
> > >
> > > > Tampines Central 1 #04-01 Tampines Plaza
> > >
> > > >
> > >
> > > > Singapore 529541
> > >
> > > >
> > >
> > > > Republic of Singapore
> > >
> > > >
> > >
> > > > Mobile Phone: +65-9648-9798
> > >
> > > >
> > >
> > > > MSN: teoenming@hotmail.com
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > -----Original
> > >
> > > > Message-----
> > >
> > > >
> > >
> > > > From: "Teo En Ming (Zhang Enming)"
> > >
> > > > <enming.teo@asiasoftsea.net >
> > >
> > > >
> > >
> > > > To: < pasik@iki.fi>
> > >
> > > >
> > >
> > > > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> > >
> > > > xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > Date: Tue, 28 Jul 2009 19:13:34 +0800
> > >
> > > >
> > >
> > > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> > >
> > > > PVOPS Kernel
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Dear All,
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > I have managed to virtualize Windows 7 32-bit as a HVM guest on
> > >
> > > > Xen 3.4.1
> > >
> > > >
> > >
> > > > RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> > >
> > > > operating
> > >
> > > >
> > >
> > > > system.
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Please see screenshots here:
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > >
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
>
> > > [
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
>
<http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> i> ]
> > >
> > >
> > >
> > > >
> > >
> > > [
>
<http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> >
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > > [
>
<http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> >
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> ]
> > >
> > > i]
> > >
> > > >
> > >
> > > >
> > >
> > > > rtual-machine-on-xen.html
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > I have uploaded 24 pictures so far at the time of this writing.
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Regards,
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > >
> > > >
> > >
> > > > BEng(Hons)(Mechanical Engineering)
> > >
> > > >
> > >
> > > > Technical Support Engineer
> > >
> > > >
> > >
> > > > Information Technology Department
> > >
> > > >
> > >
> > > > Asiasoft Online Pte Ltd
> > >
> > > >
> > >
> > > > Tampines Central 1 #04-01 Tampines Plaza
> > >
> > > >
> > >
> > > > Singapore 529541
> > >
> > > >
> > >
> > > > Republic of Singapore
> > >
> > > >
> > >
> > > > Mobile: +65-9648-9798
> > >
> > > >
> > >
> > > > MSN: teoenming@hotmail.com
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > -----Original Message-----
> > >
> > > >
> > >
> > > > From: xen-devel-bounces@lists.xensource.com
> > >
> > > >
> > >
> > > > [mailto: xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi
> > >
> > > > Kärkkäinen
> > >
> > > >
> > >
> > > > Sent: Monday, July 27, 2009 11:24 PM
> > >
> > > >
> > >
> > > > To: Teo En Ming
> > >
> > > >
> > >
> > > > Cc: Boris Derzhavets; xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> > >
> > > > Jeremy's PVOPS
> > >
> > > >
> > >
> > > > Kernel
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
> > >
> > > >
> > >
> > > > > Dear Pasi,
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Any idea on what benchmark tools I can use to measure I/O
> > >
> > > > performance of
> > >
> > > >
> > >
> > > > my
> > >
> > > >
> > >
> > > > > virtual machines?
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > Well for simple streaming IO tests you can use dd, it supports
> > >
> > > > multiple
> > >
> > > >
> > >
> > > > block sizes, O_DIRECT etc.
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > If you need multithreaded/multiprocess tests, or filesystem IO
> > >
> > > > tests, then
> > >
> > > >
> > >
> > > > you need something more sophisticated.. bonnie++, ltp disktest,
> > >
> > > > fio, iozone
> > >
> > > >
> > >
> > > > etc. Google is your friend.
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > -- Pasi
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > > Thank you.
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > >
> > > >
> > >
> > > > > BEng(Hons)(Mechanical Engineering)
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Technical Support Engineer
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Information Technology Department
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Asiasoft Online Pte Ltd
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Tampines Central 1 #04-01 Tampines Plaza
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Singapore 529541
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Republic of Singapore
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Mobile Phone: +65-9648-9798
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > MSN: teoenming@hotmail.com
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > -----Original Message-----
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > From: Pasi Kärkkäinen < pasik@iki.fi>
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > To: Teo En Ming <enming.teo@asiasoftsea.net >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
> > >
> > > >
> > >
> > > > xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Date: Mon, 27 Jul 2009 18:01:55 +0300
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> > >
> > > > Jeremy's PVOPS
> > >
> > > >
> > >
> > > > > Kernel
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > Dear Boris,
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > Based on your given information, I have managed to
> > >
> > > > configure static IP
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > address inside OpenSolaris UNIX PV guest.
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > These are the two crucial lines:
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
> > >
> > > > /etc/hostname.xnf0
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > echo 192.168.1.102 > /etc/defaultrouter
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > Please see screenshot here:
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
>
> > > [
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> 1> ]
> > >
> > >
> > >
> > > >
> > >
> > > [
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > [
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> ]
> > >
> > > 1]
> > >
> > > >
> > >
> > > >
> > >
> > > > 600-h/03.jpeg
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > [
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > [
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> ]
> > >
> > >
> > >
> > > >
> > >
> > > [
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > [
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > ]
> > >
> > > ]
> > >
> > > >
> > >
> > > >
> > >
> > > > 1600-h/03.jpeg]
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > May I know whether there are any PV device drivers for
> > >
> > > > me to install to
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > improve PV guests' performance? What are the
> > >
> > > > recommended benchmark tools
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > > to
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > > measure I/O performance of PV guests?
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > PV guest doesn't need any additional drivers. Like the name
> > >
> > > > PV says, it's
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > paravirtual, and uses the optimized drivers/interfaces
> > >
> > > > out-of-the-box.
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > -- Pasi
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > _______________________________________________
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Xen-devel mailing list
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > Xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > > > http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]
> > >
> > > > [ <http://lists.xensource.com/xen-devel>
> http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]]
> > >
> > > >
> > >
> > > > [ http://lists.xensource.com/xen-devel
> <http://lists.xensource.com/xen-devel>
> > > [http://lists.xensource.com/xen-devel]
> > >
> > > > [ <http://lists.xensource.com/xen-devel>
> http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]]]
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > _______________________________________________
> > >
> > > >
> > >
> > > > Xen-devel mailing list
> > >
> > > >
> > >
> > > > Xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]
> > >
> > > [http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]]
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > No virus found in this incoming message.
> > >
> > > >
> > >
> > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> [http://www.avg.com/
> > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > >
> > > >
> > >
> > > > Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date:
> > >
> > > > 07/26/09
> > >
> > > >
> > >
> > > > 17:59:00
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > No virus found in this outgoing message.
> > >
> > > >
> > >
> > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> [http://www.avg.com/
> > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > >
> > > >
> > >
> > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > >
> > > > 07/27/09
> > >
> > > >
> > >
> > > > 17:59:00
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > _______________________________________________
> > >
> > > >
> > >
> > > > Xen-devel mailing list
> > >
> > > >
> > >
> > > > Xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]
> > >
> > > [http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]]
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > No virus found in this incoming message.
> > >
> > > >
> > >
> > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> [http://www.avg.com/
> > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > >
> > > >
> > >
> > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > >
> > > > 07/27/09
> > >
> > > >
> > >
> > > > 17:59:00
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > No virus found in this outgoing message.
> > >
> > > >
> > >
> > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> [http://www.avg.com/
> > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > >
> > > >
> > >
> > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > >
> > > > 07/27/09
> > >
> > > >
> > >
> > > > 17:59:00
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > > _______________________________________________
> > >
> > > >
> > >
> > > > Xen-devel mailing list
> > >
> > > >
> > >
> > > > Xen-devel@lists.xensource.com
> > >
> > > >
> > >
> > > > http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]
> > >
> > > [http://lists.xensource.com/xen-devel
> > > [http://lists.xensource.com/xen-devel]]
> > >
> > >
> > >
> > > _______________________________________________
> > >
> > > Xen-devel mailing list
> > >
> > > Xen-devel@lists.xensource.com
> > >
> > > http://lists.xensource.com/xen-devel [
> <http://lists.xensource.com/xen-devel>
> http://lists.xensource.com/xen-devel]
> > >
> > >
> > >
> > > No virus found in this incoming message.
> > >
> > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> 07/27/09
> > >
> > > 17:59:00
> > >
> > >
> > >
> > > No virus found in this outgoing message.
> > >
> > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > >
> > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> 07/27/09
> > >
> > > 17:59:00
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > >
> > > Xen-devel mailing list
> > >
> > > Xen-devel@lists.xensource.com
> > >
> > > http://lists.xensource.com/xen-devel [
> <http://lists.xensource.com/xen-devel>
> http://lists.xensource.com/xen-devel]
> >
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xensource.com
> > http://lists.xensource.com/xen-devel
> >
> >
> >
> >
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
>
>
> Checked by AVG - www.avg.com
> Version: 8.5.375 / Virus Database: 270.13.33/2267 - Release Date: 07/27/09
> 17:59:00
>
> Checked by AVG - www.avg.com
> Version: 8.5.375 / Virus Database: 270.13.33/2267 - Release Date: 07/28/09
> 17:58:00
>
>
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.35/2269 - Release Date: 07/28/09
17:58:00
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.35/2269 - Release Date: 07/28/09
17:58:00
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.35/2269 - Release Date: 07/28/09
17:58:00
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.35/2269 - Release Date: 07/28/09
17:58:00
^ permalink raw reply [flat|nested] 86+ messages in thread
* RE: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-29 13:29 ` Pasi Kärkkäinen
@ 2009-07-29 13:30 ` Teo En Ming (Zhang Enming)
0 siblings, 0 replies; 86+ messages in thread
From: Teo En Ming (Zhang Enming) @ 2009-07-29 13:30 UTC (permalink / raw)
To: pasik; +Cc: 'Boris Derzhavets', xen-devel
I suppose it is not free too?
Regards,
Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
BEng(Hons)(Mechanical Engineering)
Technical Support Engineer
Information Technology Department
Asiasoft Online Pte Ltd
Tampines Central 1 #04-01 Tampines Plaza
Singapore 529541
Republic of Singapore
Mobile: +65-9648-9798
MSN: teoenming@hotmail.com
-----Original Message-----
From: Pasi Kärkkäinen [mailto:pasik@iki.fi]
Sent: Wednesday, July 29, 2009 9:29 PM
To: Teo En Ming (Zhang Enming)
Cc: 'Boris Derzhavets'; xen-devel@lists.xensource.com
Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
Kernel
On Wed, Jul 29, 2009 at 09:26:54PM +0800, Teo En Ming (Zhang Enming) wrote:
> But I thought there is a Mac OS X version for Intel architecture?
>
Yes, there is. It's for Intel based Apple Macs.
-- Pasi
> Regards,
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
> Technical Support Engineer
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Republic of Singapore
> Mobile: +65-9648-9798
> MSN: teoenming@hotmail.com
> -----Original Message-----
> From: Pasi Kärkkäinen [mailto:pasik@iki.fi]
> Sent: Wednesday, July 29, 2009 9:24 PM
> To: Teo En Ming (Zhang Enming)
> Cc: 'Boris Derzhavets'; xen-devel@lists.xensource.com
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
> On Wed, Jul 29, 2009 at 09:07:48PM +0800, Teo En Ming (Zhang Enming)
wrote:
> > Hi,
> >
> >
> >
> > I am looking forward to virtualizing Mac OS X x86 (Intel) version. May I
> > know whether it is free or must be purchased?
> >
> >
> >
> > If it is free, where is the official download link?
> >
>
> OSX is not free.
>
> Also I think the license agreement of OSX forbids you to install it into
> anything else than a Mac.
>
> -- Pasi
>
> >
> >
> > Thank you.
> >
> >
> >
> > Regards,
> >
> >
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > BEng(Hons)(Mechanical Engineering)
> >
> > Technical Support Engineer
> >
> > Information Technology Department
> > Asiasoft Online Pte Ltd
> > Tampines Central 1 #04-01 Tampines Plaza
> > Singapore 529541
> >
> > Republic of Singapore
> > Mobile: +65-9648-9798
> > MSN: teoenming@hotmail.com
> >
> > _____
> >
> > From: xen-devel-bounces@lists.xensource.com
> > [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Teo En Ming
> > Sent: Wednesday, July 29, 2009 12:20 PM
> > To: Boris Derzhavets; 'Pasi Kärkkäinen'
> > Cc: xen-devel@lists.xensource.com
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> > Kernel
> >
> >
> >
> > Dear All,
> >
> >
> >
> > I have also virtualized Windows Server 2003 Standard Edition 32-bit on
Xen
> > 3.4.1 RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> > operating system.
> >
> >
> >
> > Please see screenshots here:
> >
> >
> >
> >
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-server-2
> > 003-standard-edition.html
> >
> >
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > BEng(Hons)(Mechanical Engineering)
> >
> > Technical Support Engineer
> >
> > Information Technology Department
> > Asiasoft Online Pte Ltd
> > Tampines Central 1 #04-01 Tampines Plaza
> > Singapore 529541
> >
> > Republic of Singapore
> > Mobile Phone: +65-9648-9798
> > MSN: teoenming@hotmail.com
> >
> >
> >
> > -----Original Message-----
> > From: "Boris Derzhavets" <bderzhavets@yahoo.com>
> > To: 'Pasi Kärkkäinen' <pasik@iki.fi>
> > Cc: <xen-devel@lists.xensource.com>, "'Teo En Ming'"
> > <enming.teo@asiasoftsea.net>
> > Date: Wed, 29 Jul 2009 12:25:42 +0800
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> > Kernel
> >
> >
> > >Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
> >
> > >You use it to passthrough SCSI or SATA _controller_ (HBA).
> >
> > Pasi,
> >
> > I understand that . South Bridge ICH9(10)R is located PCI Bus.
> > "lspci -v" gives me :-
> >
> > 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
> > port SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
> >
> > Subsystem: ASUSTeK Computer Inc. Device 8277
> >
> > Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 4347
> >
> > I/O ports at 9c00 [size=8]
> >
> > I/O ports at 9880 [size=4]
> >
> > I/O ports at 9800 [size=8]
> >
> > I/O ports at 9480 [size=4]
> >
> > I/O ports at 9400 [size=32]
> >
> > Memory at f9ffe800 (32-bit, non-prefetchable) [size=2K]
> >
> > Capabilities: [80] MSI: Mask- 64bit- Count=1/16 Enable+
> >
> > Capabilities: [70] Power Management version 3
> >
> > Capabilities: [a8] SATA HBA <?>
> >
> > Capabilities: [b0] Vendor Specific Information <?>
> >
> > Kernel driver in use: ahci
> >
> > How to manage afterwards ? Link would be fine.
> >
> > Thanks.
> > Boris.
> >
> > --- On Tue, 7/28/09, Pasi Kärkkäinen <pasik@iki.fi> wrote:
> >
> >
> > From: Pasi Kärkkäinen <pasik@iki.fi>
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> > Kernel
> > To: "Boris Derzhavets" <bderzhavets@yahoo.com>
> > Cc: xen-devel@lists.xensource.com, "Teo En Ming"
> > <enming.teo@asiasoftsea.net>
> > Date: Tuesday, July 28, 2009, 10:24 AM
> >
> > On Tue, Jul 28, 2009 at 06:49:49AM -0700, Boris Derzhavets wrote:
> > > >Xen supports PCI device passthrough to paravirtualized domUs without
> any
> > > > additional hardware support/requirements.
> > >
> > > It was never my concern. But , i guess it works for SCSI drives , not
> > SATA.
> > >
> >
> > Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
> >
> > You use it to passthrough SCSI or SATA _controller_ (HBA). Or a NIC.
> > Or a USB controller. Or a graphics card.
> >
> > -- Pasi
> >
> > > Boris.
> > >
> > > --- On Tue, 7/28/09, Pasi Kärkkäinen < pasik@iki.fi> wrote:
> > >
> > > From: Pasi Kärkkäinen < pasik@iki.fi>
> > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
PVOPS
> > Kernel
> > > To: "Teo En Ming" <enming.teo@asiasoftsea.net >
> > > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> > xen-devel@lists.xensource.com
> > > Date: Tuesday, July 28, 2009, 8:48 AM
> > >
> > > On Tue, Jul 28, 2009 at 08:27:35PM +0800, Teo En Ming wrote:
> > > > Dear Pasi,
> > > >
> > > > I thought only paravirtualized guests allow PCI devices to be passed
> > through
> > > > from the Dom 0 host? Fully virtualized guests like Windows are not
> able
> > to
> > > > access PCI devices directly in Dom 0.
> > > >
> > >
> > > Xen supports PCI device passthrough to paravirtualized domUs without
any
>
> > > additional hardware support/requirements.
> > >
> > > PCI device passthrough to HVM domains requires VT-d (iommu) support.
> > >
> > > > Does Core 2 Duo support Intel VT-d? Or only in Xeons?
> > > >
> > >
> > > VT-d support is in the chipset. Not many chipsets have it yet.. And
> there
> > > are bugs in the VT-d support in many motherboards..
> > >
> > > > I am using Xen 3.4.1 testing code right now. Does it support PCI
> device
> > pass
> > > > through?
> > > >
> > >
> > > Yes, I think Xen 3.4.1 has VT-d support. Although the code is still
not
> > very
> > > mature, especially with graphics cards there are a lot of problems.
> > >
> > > See xen-devel and xen-users archives for more information.
> > >
> > > -- Pasi
> > >
> > > > Thank you.
> > > >
> > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > > > BEng(Hons)(Mechanical Engineering)
> > > >
> > > > Technical Support Engineer
> > > >
> > > > Information Technology Department
> > > >
> > > > Asiasoft Online Pte Ltd
> > > >
> > > > Tampines Central 1 #04-01 Tampines Plaza
> > > >
> > > > Singapore 529541
> > > >
> > > > Republic of Singapore
> > > >
> > > > Mobile Phone: +65-9648-9798
> > > >
> > > > MSN: teoenming@hotmail.com
> > > >
> > > >
> > > > -----Original Message-----
> > > >
> > > > From: Pasi Kärkkäinen < pasik@iki.fi>
> > > >
> > > > To: "'Teo En Ming'" <enming.teo@asiasoftsea.net >
> > > >
> > > > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> > > > xen-devel@lists.xensource.com
> > > >
> > > > Date: Tue, 28 Jul 2009 20:32:10 +0800
> > > >
> > > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> PVOPS
> >
> > > > Kernel
> > > >
> > > >
> > > >
> > > >
> > > > On Tue, Jul 28, 2009 at 07:25:58PM +0800, Teo En Ming wrote:
> > > >
> > > > > Dear Boris,
> > > >
> > > > >
> > > >
> > > > > Any way I can change the emulated display driver in Windows HVM
> guest
> > to a
> > > >
> > > >
> > > >
> > > > > better one for game playing?
> > > >
> > > > >
> > > >
> > > >
> > > >
> > > > You can't really do that. Qemu (used in Xen HVM domains) only
provides
> > basic
> > > >
> > > > 2D display adapter, so it's not really suitable for gaming.
> > > >
> > > >
> > > >
> > > > If you want to experiment with unstable/development code, you could
> try
> > VT-d
> > > >
> > > > to passthrough a graphics adapter (the whole device) to HVM guest.
> > > >
> > > >
> > > >
> > > > I think there are also some graphics drivers that operate through
the
> > > >
> > > > network, ie. communicate with dom0 graphics hardware, but I don't
have
> > any
> > > >
> > > > links to those.
> > > >
> > > >
> > > >
> > > > Xen is mostly a server virtualization software/solution nowadays..
> > > >
> > > >
> > > >
> > > > -- Pasi
> > > >
> > > >
> > > >
> > > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > > >
> > > > > BEng(Hons)(Mechanical Engineering)
> > > >
> > > > >
> > > >
> > > > > Technical Support Engineer
> > > >
> > > > >
> > > >
> > > > > Information Technology Department
> > > >
> > > > >
> > > >
> > > > > Asiasoft Online Pte Ltd
> > > >
> > > > >
> > > >
> > > > > Tampines Central 1 #04-01 Tampines Plaza
> > > >
> > > > >
> > > >
> > > > > Singapore 529541
> > > >
> > > > >
> > > >
> > > > > Republic of Singapore
> > > >
> > > > >
> > > >
> > > > > Mobile Phone: +65-9648-9798
> > > >
> > > > >
> > > >
> > > > > MSN: teoenming@hotmail.com
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > -----Original Message-----
> > > >
> > > > >
> > > >
> > > > > From: Boris Derzhavets <bderzhavets@yahoo.com>
> > > >
> > > > >
> > > >
> > > > > To: enming.teo@asiasoftsea.net, pasik@iki.fi
> > > >
> > > > >
> > > >
> > > > > Cc: xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
> > > >
> > > > >
> > > >
> > > > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> > PVOPS
> > > >
> > > > > Kernel
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > It's really exciting ;)
> > > >
> > > > >
> > > >
> > > > > Boris.
> > > >
> > > > >
> > > >
> > > > > --- On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net >
> wrote:
> > > >
> > > > >
> > > >
> > > > > From: Teo En Ming <enming.teo@asiasoftsea.net >
> > > >
> > > > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> > PVOPS
> > > >
> > > > > Kernel
> > > >
> > > > > To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net >,
> > > >
> > > > pasik@iki.fi
> > > >
> > > > > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> > > >
> > > > > xen-devel@lists.xensource.com
> > > >
> > > > > Date: Tuesday, July 28, 2009, 7:07 AM
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Hi,
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0
Kernel
> > > >
> > > > > 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Please see screenshots here:
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > >
> >
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
> >
> > > > [
> >
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
> >
>
<http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-
> > v> ]
> > > >
> > > > irtual-machine-on.html
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Can I change the emulated display adapter driver in Windows XP HVM
> > > >
> > > > > guest under Xen to a better one so that I can play games?
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Thank you!!!
> > > >
> > > > >
> > > >
> > > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > > >
> > > > > BEng(Hons)(Mechanical Engineering)
> > > >
> > > > >
> > > >
> > > > > Technical Support Engineer
> > > >
> > > > >
> > > >
> > > > > Information Technology Department
> > > >
> > > > >
> > > >
> > > > > Asiasoft Online Pte Ltd
> > > >
> > > > >
> > > >
> > > > > Tampines Central 1 #04-01 Tampines Plaza
> > > >
> > > > >
> > > >
> > > > > Singapore 529541
> > > >
> > > > >
> > > >
> > > > > Republic of Singapore
> > > >
> > > > >
> > > >
> > > > > Mobile Phone: +65-9648-9798
> > > >
> > > > >
> > > >
> > > > > MSN: teoenming@hotmail.com
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > -----Original
> > > >
> > > > > Message-----
> > > >
> > > > >
> > > >
> > > > > From: "Teo En Ming (Zhang Enming)"
> > > >
> > > > > <enming.teo@asiasoftsea.net >
> > > >
> > > > >
> > > >
> > > > > To: < pasik@iki.fi>
> > > >
> > > > >
> > > >
> > > > > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> > > >
> > > > > xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > Date: Tue, 28 Jul 2009 19:13:34 +0800
> > > >
> > > > >
> > > >
> > > > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in
Jeremy's
> > > >
> > > > > PVOPS Kernel
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Dear All,
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > I have managed to virtualize Windows 7 32-bit as a HVM guest on
> > > >
> > > > > Xen 3.4.1
> > > >
> > > > >
> > > >
> > > > > RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> > > >
> > > > > operating
> > > >
> > > > >
> > > >
> > > > > system.
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Please see screenshots here:
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > >
> >
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
> >
> > > > [
> >
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
> >
>
<http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > i> ]
> > > >
> > > >
> > > >
> > > > >
> > > >
> > > > [
> >
>
<http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > >
> >
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > > > [
> >
>
<http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > >
> >
>
http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > ]
> > > >
> > > > i]
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > rtual-machine-on-xen.html
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > I have uploaded 24 pictures so far at the time of this writing.
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Regards,
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > > >
> > > > >
> > > >
> > > > > BEng(Hons)(Mechanical Engineering)
> > > >
> > > > >
> > > >
> > > > > Technical Support Engineer
> > > >
> > > > >
> > > >
> > > > > Information Technology Department
> > > >
> > > > >
> > > >
> > > > > Asiasoft Online Pte Ltd
> > > >
> > > > >
> > > >
> > > > > Tampines Central 1 #04-01 Tampines Plaza
> > > >
> > > > >
> > > >
> > > > > Singapore 529541
> > > >
> > > > >
> > > >
> > > > > Republic of Singapore
> > > >
> > > > >
> > > >
> > > > > Mobile: +65-9648-9798
> > > >
> > > > >
> > > >
> > > > > MSN: teoenming@hotmail.com
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > -----Original Message-----
> > > >
> > > > >
> > > >
> > > > > From: xen-devel-bounces@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > [mailto: xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi
> > > >
> > > > > Kärkkäinen
> > > >
> > > > >
> > > >
> > > > > Sent: Monday, July 27, 2009 11:24 PM
> > > >
> > > > >
> > > >
> > > > > To: Teo En Ming
> > > >
> > > > >
> > > >
> > > > > Cc: Boris Derzhavets; xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> > > >
> > > > > Jeremy's PVOPS
> > > >
> > > > >
> > > >
> > > > > Kernel
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
> > > >
> > > > >
> > > >
> > > > > > Dear Pasi,
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Any idea on what benchmark tools I can use to measure I/O
> > > >
> > > > > performance of
> > > >
> > > > >
> > > >
> > > > > my
> > > >
> > > > >
> > > >
> > > > > > virtual machines?
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Well for simple streaming IO tests you can use dd, it supports
> > > >
> > > > > multiple
> > > >
> > > > >
> > > >
> > > > > block sizes, O_DIRECT etc.
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > If you need multithreaded/multiprocess tests, or filesystem IO
> > > >
> > > > > tests, then
> > > >
> > > > >
> > > >
> > > > > you need something more sophisticated.. bonnie++, ltp disktest,
> > > >
> > > > > fio, iozone
> > > >
> > > > >
> > > >
> > > > > etc. Google is your friend.
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > -- Pasi
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > > Thank you.
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > > >
> > > > >
> > > >
> > > > > > BEng(Hons)(Mechanical Engineering)
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Technical Support Engineer
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Information Technology Department
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Asiasoft Online Pte Ltd
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Tampines Central 1 #04-01 Tampines Plaza
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Singapore 529541
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Republic of Singapore
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Mobile Phone: +65-9648-9798
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > MSN: teoenming@hotmail.com
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > -----Original Message-----
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > From: Pasi Kärkkäinen < pasik@iki.fi>
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > To: Teo En Ming <enming.teo@asiasoftsea.net >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
> > > >
> > > > >
> > > >
> > > > > xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Date: Mon, 27 Jul 2009 18:01:55 +0300
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> > > >
> > > > > Jeremy's PVOPS
> > > >
> > > > >
> > > >
> > > > > > Kernel
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > Dear Boris,
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > Based on your given information, I have managed to
> > > >
> > > > > configure static IP
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > address inside OpenSolaris UNIX PV guest.
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > These are the two crucial lines:
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
> > > >
> > > > > /etc/hostname.xnf0
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > echo 192.168.1.102 > /etc/defaultrouter
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > Please see screenshot here:
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > >
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
> >
> > > > [
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
> >
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > 1> ]
> > > >
> > > >
> > > >
> > > > >
> > > >
> > > > [
> >
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > >
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > > [
> >
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > >
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > ]
> > > >
> > > > 1]
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > 600-h/03.jpeg
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > [
> >
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > >
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > > [
> >
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > >
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > ]
> > > >
> > > >
> > > >
> > > > >
> > > >
> > > > [
> >
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > >
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > > [
> >
>
http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
>
<http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > ]
> > > >
> > > > ]
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > 1600-h/03.jpeg]
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > May I know whether there are any PV device drivers for
> > > >
> > > > > me to install to
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > improve PV guests' performance? What are the
> > > >
> > > > > recommended benchmark tools
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > > to
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > measure I/O performance of PV guests?
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > PV guest doesn't need any additional drivers. Like the name
> > > >
> > > > > PV says, it's
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > paravirtual, and uses the optimized drivers/interfaces
> > > >
> > > > > out-of-the-box.
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > -- Pasi
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > _______________________________________________
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Xen-devel mailing list
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]
> > > >
> > > > > [ <http://lists.xensource.com/xen-devel>
> > http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]]
> > > >
> > > > >
> > > >
> > > > > [ http://lists.xensource.com/xen-devel
> > <http://lists.xensource.com/xen-devel>
> > > > [http://lists.xensource.com/xen-devel]
> > > >
> > > > > [ <http://lists.xensource.com/xen-devel>
> > http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]]]
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > _______________________________________________
> > > >
> > > > >
> > > >
> > > > > Xen-devel mailing list
> > > >
> > > > >
> > > >
> > > > > Xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]
> > > >
> > > > [http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]]
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > No virus found in this incoming message.
> > > >
> > > > >
> > > >
> > > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > [http://www.avg.com/
> > > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > > >
> > > > >
> > > >
> > > > > Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date:
> > > >
> > > > > 07/26/09
> > > >
> > > > >
> > > >
> > > > > 17:59:00
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > No virus found in this outgoing message.
> > > >
> > > > >
> > > >
> > > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > [http://www.avg.com/
> > > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > > >
> > > > >
> > > >
> > > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > > >
> > > > > 07/27/09
> > > >
> > > > >
> > > >
> > > > > 17:59:00
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > _______________________________________________
> > > >
> > > > >
> > > >
> > > > > Xen-devel mailing list
> > > >
> > > > >
> > > >
> > > > > Xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]
> > > >
> > > > [http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]]
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > No virus found in this incoming message.
> > > >
> > > > >
> > > >
> > > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > [http://www.avg.com/
> > > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > > >
> > > > >
> > > >
> > > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > > >
> > > > > 07/27/09
> > > >
> > > > >
> > > >
> > > > > 17:59:00
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > No virus found in this outgoing message.
> > > >
> > > > >
> > > >
> > > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > [http://www.avg.com/
> > > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > > >
> > > > >
> > > >
> > > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > > >
> > > > > 07/27/09
> > > >
> > > > >
> > > >
> > > > > 17:59:00
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > _______________________________________________
> > > >
> > > > >
> > > >
> > > > > Xen-devel mailing list
> > > >
> > > > >
> > > >
> > > > > Xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]
> > > >
> > > > [http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]]
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > >
> > > > Xen-devel mailing list
> > > >
> > > > Xen-devel@lists.xensource.com
> > > >
> > > > http://lists.xensource.com/xen-devel [
> > <http://lists.xensource.com/xen-devel>
> > http://lists.xensource.com/xen-devel]
> > > >
> > > >
> > > >
> > > > No virus found in this incoming message.
> > > >
> > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > > >
> > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > 07/27/09
> > > >
> > > > 17:59:00
> > > >
> > > >
> > > >
> > > > No virus found in this outgoing message.
> > > >
> > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > > >
> > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > 07/27/09
> > > >
> > > > 17:59:00
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > >
> > > > Xen-devel mailing list
> > > >
> > > > Xen-devel@lists.xensource.com
> > > >
> > > > http://lists.xensource.com/xen-devel [
> > <http://lists.xensource.com/xen-devel>
> > http://lists.xensource.com/xen-devel]
> > >
> > > _______________________________________________
> > > Xen-devel mailing list
> > > Xen-devel@lists.xensource.com
> > > http://lists.xensource.com/xen-devel
> > >
> > >
> > >
> > >
> >
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xensource.com
> > http://lists.xensource.com/xen-devel
> >
> >
> >
> > Checked by AVG - www.avg.com
> > Version: 8.5.375 / Virus Database: 270.13.33/2267 - Release Date:
07/27/09
> > 17:59:00
> >
> > Checked by AVG - www.avg.com
> > Version: 8.5.375 / Virus Database: 270.13.33/2267 - Release Date:
07/28/09
> > 17:58:00
> >
> >
>
> Checked by AVG - www.avg.com
> Version: 8.5.375 / Virus Database: 270.13.35/2269 - Release Date: 07/28/09
> 17:58:00
>
> Checked by AVG - www.avg.com
> Version: 8.5.375 / Virus Database: 270.13.35/2269 - Release Date: 07/28/09
> 17:58:00
>
>
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.35/2269 - Release Date: 07/28/09
17:58:00
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.13.35/2269 - Release Date: 07/28/09
17:58:00
^ permalink raw reply [flat|nested] 86+ messages in thread
* Re: Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel
2009-07-29 13:29 ` Teo En Ming (Zhang Enming)
@ 2009-07-29 13:32 ` Pasi Kärkkäinen
0 siblings, 0 replies; 86+ messages in thread
From: Pasi Kärkkäinen @ 2009-07-29 13:32 UTC (permalink / raw)
To: Teo En Ming (Zhang Enming); +Cc: 'Boris Derzhavets', xen-devel
On Wed, Jul 29, 2009 at 09:29:06PM +0800, Teo En Ming (Zhang Enming) wrote:
> We have the official Mac OS X 10.5 Install Discs 1 and 2 in our company. But
> it is for MAC computers only, not Intel architecture.
>
All the new Macs are Intel based. Macs based on PowerPC (PPC) are not made
anymore. I think the next OSX version (Snow Leopard) will be only available
for Intel based Macs.
Anyway, technically it might be possible to install OSX x86 as a Xen HVM
domain. But please check the Apple's OSX x86 license agreement before doing
that.
-- Pasi
> Regards,
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
> Technical Support Engineer
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Republic of Singapore
> Mobile: +65-9648-9798
> MSN: teoenming@hotmail.com
>
> -----Original Message-----
> From: xen-devel-bounces@lists.xensource.com
> [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Teo En Ming
> (Zhang Enming)
> Sent: Wednesday, July 29, 2009 9:27 PM
> To: pasik@iki.fi
> Cc: 'Boris Derzhavets'; xen-devel@lists.xensource.com
> Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
> But I thought there is a Mac OS X version for Intel architecture?
>
> Regards,
>
> Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> BEng(Hons)(Mechanical Engineering)
> Technical Support Engineer
> Information Technology Department
> Asiasoft Online Pte Ltd
> Tampines Central 1 #04-01 Tampines Plaza
> Singapore 529541
> Republic of Singapore
> Mobile: +65-9648-9798
> MSN: teoenming@hotmail.com
> -----Original Message-----
> From: Pasi Kärkkäinen [mailto:pasik@iki.fi]
> Sent: Wednesday, July 29, 2009 9:24 PM
> To: Teo En Ming (Zhang Enming)
> Cc: 'Boris Derzhavets'; xen-devel@lists.xensource.com
> Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> Kernel
>
> On Wed, Jul 29, 2009 at 09:07:48PM +0800, Teo En Ming (Zhang Enming) wrote:
> > Hi,
> >
> >
> >
> > I am looking forward to virtualizing Mac OS X x86 (Intel) version. May I
> > know whether it is free or must be purchased?
> >
> >
> >
> > If it is free, where is the official download link?
> >
>
> OSX is not free.
>
> Also I think the license agreement of OSX forbids you to install it into
> anything else than a Mac.
>
> -- Pasi
>
> >
> >
> > Thank you.
> >
> >
> >
> > Regards,
> >
> >
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > BEng(Hons)(Mechanical Engineering)
> >
> > Technical Support Engineer
> >
> > Information Technology Department
> > Asiasoft Online Pte Ltd
> > Tampines Central 1 #04-01 Tampines Plaza
> > Singapore 529541
> >
> > Republic of Singapore
> > Mobile: +65-9648-9798
> > MSN: teoenming@hotmail.com
> >
> > _____
> >
> > From: xen-devel-bounces@lists.xensource.com
> > [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Teo En Ming
> > Sent: Wednesday, July 29, 2009 12:20 PM
> > To: Boris Derzhavets; 'Pasi Kärkkäinen'
> > Cc: xen-devel@lists.xensource.com
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> > Kernel
> >
> >
> >
> > Dear All,
> >
> >
> >
> > I have also virtualized Windows Server 2003 Standard Edition 32-bit on Xen
> > 3.4.1 RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> > operating system.
> >
> >
> >
> > Please see screenshots here:
> >
> >
> >
> >
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-server-2
> > 003-standard-edition.html
> >
> >
> > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > BEng(Hons)(Mechanical Engineering)
> >
> > Technical Support Engineer
> >
> > Information Technology Department
> > Asiasoft Online Pte Ltd
> > Tampines Central 1 #04-01 Tampines Plaza
> > Singapore 529541
> >
> > Republic of Singapore
> > Mobile Phone: +65-9648-9798
> > MSN: teoenming@hotmail.com
> >
> >
> >
> > -----Original Message-----
> > From: "Boris Derzhavets" <bderzhavets@yahoo.com>
> > To: 'Pasi Kärkkäinen' <pasik@iki.fi>
> > Cc: <xen-devel@lists.xensource.com>, "'Teo En Ming'"
> > <enming.teo@asiasoftsea.net>
> > Date: Wed, 29 Jul 2009 12:25:42 +0800
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> > Kernel
> >
> >
> > >Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
> >
> > >You use it to passthrough SCSI or SATA _controller_ (HBA).
> >
> > Pasi,
> >
> > I understand that . South Bridge ICH9(10)R is located PCI Bus.
> > "lspci -v" gives me :-
> >
> > 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
> > port SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
> >
> > Subsystem: ASUSTeK Computer Inc. Device 8277
> >
> > Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 4347
> >
> > I/O ports at 9c00 [size=8]
> >
> > I/O ports at 9880 [size=4]
> >
> > I/O ports at 9800 [size=8]
> >
> > I/O ports at 9480 [size=4]
> >
> > I/O ports at 9400 [size=32]
> >
> > Memory at f9ffe800 (32-bit, non-prefetchable) [size=2K]
> >
> > Capabilities: [80] MSI: Mask- 64bit- Count=1/16 Enable+
> >
> > Capabilities: [70] Power Management version 3
> >
> > Capabilities: [a8] SATA HBA <?>
> >
> > Capabilities: [b0] Vendor Specific Information <?>
> >
> > Kernel driver in use: ahci
> >
> > How to manage afterwards ? Link would be fine.
> >
> > Thanks.
> > Boris.
> >
> > --- On Tue, 7/28/09, Pasi Kärkkäinen <pasik@iki.fi> wrote:
> >
> >
> > From: Pasi Kärkkäinen <pasik@iki.fi>
> > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> > Kernel
> > To: "Boris Derzhavets" <bderzhavets@yahoo.com>
> > Cc: xen-devel@lists.xensource.com, "Teo En Ming"
> > <enming.teo@asiasoftsea.net>
> > Date: Tuesday, July 28, 2009, 10:24 AM
> >
> > On Tue, Jul 28, 2009 at 06:49:49AM -0700, Boris Derzhavets wrote:
> > > >Xen supports PCI device passthrough to paravirtualized domUs without
> any
> > > > additional hardware support/requirements.
> > >
> > > It was never my concern. But , i guess it works for SCSI drives , not
> > SATA.
> > >
> >
> > Uhm? You can't use PCI device passthrough for SCSI or SATA drives?
> >
> > You use it to passthrough SCSI or SATA _controller_ (HBA). Or a NIC.
> > Or a USB controller. Or a graphics card.
> >
> > -- Pasi
> >
> > > Boris.
> > >
> > > --- On Tue, 7/28/09, Pasi Kärkkäinen < pasik@iki.fi> wrote:
> > >
> > > From: Pasi Kärkkäinen < pasik@iki.fi>
> > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's PVOPS
> > Kernel
> > > To: "Teo En Ming" <enming.teo@asiasoftsea.net >
> > > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> > xen-devel@lists.xensource.com
> > > Date: Tuesday, July 28, 2009, 8:48 AM
> > >
> > > On Tue, Jul 28, 2009 at 08:27:35PM +0800, Teo En Ming wrote:
> > > > Dear Pasi,
> > > >
> > > > I thought only paravirtualized guests allow PCI devices to be passed
> > through
> > > > from the Dom 0 host? Fully virtualized guests like Windows are not
> able
> > to
> > > > access PCI devices directly in Dom 0.
> > > >
> > >
> > > Xen supports PCI device passthrough to paravirtualized domUs without any
>
> > > additional hardware support/requirements.
> > >
> > > PCI device passthrough to HVM domains requires VT-d (iommu) support.
> > >
> > > > Does Core 2 Duo support Intel VT-d? Or only in Xeons?
> > > >
> > >
> > > VT-d support is in the chipset. Not many chipsets have it yet.. And
> there
> > > are bugs in the VT-d support in many motherboards..
> > >
> > > > I am using Xen 3.4.1 testing code right now. Does it support PCI
> device
> > pass
> > > > through?
> > > >
> > >
> > > Yes, I think Xen 3.4.1 has VT-d support. Although the code is still not
> > very
> > > mature, especially with graphics cards there are a lot of problems.
> > >
> > > See xen-devel and xen-users archives for more information.
> > >
> > > -- Pasi
> > >
> > > > Thank you.
> > > >
> > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > > > BEng(Hons)(Mechanical Engineering)
> > > >
> > > > Technical Support Engineer
> > > >
> > > > Information Technology Department
> > > >
> > > > Asiasoft Online Pte Ltd
> > > >
> > > > Tampines Central 1 #04-01 Tampines Plaza
> > > >
> > > > Singapore 529541
> > > >
> > > > Republic of Singapore
> > > >
> > > > Mobile Phone: +65-9648-9798
> > > >
> > > > MSN: teoenming@hotmail.com
> > > >
> > > >
> > > > -----Original Message-----
> > > >
> > > > From: Pasi Kärkkäinen < pasik@iki.fi>
> > > >
> > > > To: "'Teo En Ming'" <enming.teo@asiasoftsea.net >
> > > >
> > > > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> > > > xen-devel@lists.xensource.com
> > > >
> > > > Date: Tue, 28 Jul 2009 20:32:10 +0800
> > > >
> > > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> PVOPS
> >
> > > > Kernel
> > > >
> > > >
> > > >
> > > >
> > > > On Tue, Jul 28, 2009 at 07:25:58PM +0800, Teo En Ming wrote:
> > > >
> > > > > Dear Boris,
> > > >
> > > > >
> > > >
> > > > > Any way I can change the emulated display driver in Windows HVM
> guest
> > to a
> > > >
> > > >
> > > >
> > > > > better one for game playing?
> > > >
> > > > >
> > > >
> > > >
> > > >
> > > > You can't really do that. Qemu (used in Xen HVM domains) only provides
> > basic
> > > >
> > > > 2D display adapter, so it's not really suitable for gaming.
> > > >
> > > >
> > > >
> > > > If you want to experiment with unstable/development code, you could
> try
> > VT-d
> > > >
> > > > to passthrough a graphics adapter (the whole device) to HVM guest.
> > > >
> > > >
> > > >
> > > > I think there are also some graphics drivers that operate through the
> > > >
> > > > network, ie. communicate with dom0 graphics hardware, but I don't have
> > any
> > > >
> > > > links to those.
> > > >
> > > >
> > > >
> > > > Xen is mostly a server virtualization software/solution nowadays..
> > > >
> > > >
> > > >
> > > > -- Pasi
> > > >
> > > >
> > > >
> > > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > > >
> > > > > BEng(Hons)(Mechanical Engineering)
> > > >
> > > > >
> > > >
> > > > > Technical Support Engineer
> > > >
> > > > >
> > > >
> > > > > Information Technology Department
> > > >
> > > > >
> > > >
> > > > > Asiasoft Online Pte Ltd
> > > >
> > > > >
> > > >
> > > > > Tampines Central 1 #04-01 Tampines Plaza
> > > >
> > > > >
> > > >
> > > > > Singapore 529541
> > > >
> > > > >
> > > >
> > > > > Republic of Singapore
> > > >
> > > > >
> > > >
> > > > > Mobile Phone: +65-9648-9798
> > > >
> > > > >
> > > >
> > > > > MSN: teoenming@hotmail.com
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > -----Original Message-----
> > > >
> > > > >
> > > >
> > > > > From: Boris Derzhavets <bderzhavets@yahoo.com>
> > > >
> > > > >
> > > >
> > > > > To: enming.teo@asiasoftsea.net, pasik@iki.fi
> > > >
> > > > >
> > > >
> > > > > Cc: xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > Date: Tue, 28 Jul 2009 04:19:13 -0700 (PDT)
> > > >
> > > > >
> > > >
> > > > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> > PVOPS
> > > >
> > > > > Kernel
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > It's really exciting ;)
> > > >
> > > > >
> > > >
> > > > > Boris.
> > > >
> > > > >
> > > >
> > > > > --- On Tue, 7/28/09, Teo En Ming <enming.teo@asiasoftsea.net >
> wrote:
> > > >
> > > > >
> > > >
> > > > > From: Teo En Ming <enming.teo@asiasoftsea.net >
> > > >
> > > > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> > PVOPS
> > > >
> > > > > Kernel
> > > >
> > > > > To: "Teo En Ming (Zhang Enming)" <enming.teo@asiasoftsea.net >,
> > > >
> > > > pasik@iki.fi
> > > >
> > > > > Cc: "'Boris Derzhavets'" <bderzhavets@yahoo.com>,
> > > >
> > > > > xen-devel@lists.xensource.com
> > > >
> > > > > Date: Tuesday, July 28, 2009, 7:07 AM
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Hi,
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > I have also virtualized Windows XP under Xen 3.4.1 RC8 Dom 0 Kernel
> > > >
> > > > > 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit Host.
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Please see screenshots here:
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > >
> >
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
> >
> > > > [
> >
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-v
> >
> <http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-xp-hvm-
> > v> ]
> > > >
> > > > irtual-machine-on.html
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Can I change the emulated display adapter driver in Windows XP HVM
> > > >
> > > > > guest under Xen to a better one so that I can play games?
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Thank you!!!
> > > >
> > > > >
> > > >
> > > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > > >
> > > > > BEng(Hons)(Mechanical Engineering)
> > > >
> > > > >
> > > >
> > > > > Technical Support Engineer
> > > >
> > > > >
> > > >
> > > > > Information Technology Department
> > > >
> > > > >
> > > >
> > > > > Asiasoft Online Pte Ltd
> > > >
> > > > >
> > > >
> > > > > Tampines Central 1 #04-01 Tampines Plaza
> > > >
> > > > >
> > > >
> > > > > Singapore 529541
> > > >
> > > > >
> > > >
> > > > > Republic of Singapore
> > > >
> > > > >
> > > >
> > > > > Mobile Phone: +65-9648-9798
> > > >
> > > > >
> > > >
> > > > > MSN: teoenming@hotmail.com
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > -----Original
> > > >
> > > > > Message-----
> > > >
> > > > >
> > > >
> > > > > From: "Teo En Ming (Zhang Enming)"
> > > >
> > > > > <enming.teo@asiasoftsea.net >
> > > >
> > > > >
> > > >
> > > > > To: < pasik@iki.fi>
> > > >
> > > > >
> > > >
> > > > > Cc: 'Boris Derzhavets' <bderzhavets@yahoo.com>,
> > > >
> > > > > xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > Date: Tue, 28 Jul 2009 19:13:34 +0800
> > > >
> > > > >
> > > >
> > > > > Subject: RE: [Xen-devel] Unable to Configure Xen Dom 0 in Jeremy's
> > > >
> > > > > PVOPS Kernel
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Dear All,
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > I have managed to virtualize Windows 7 32-bit as a HVM guest on
> > > >
> > > > > Xen 3.4.1
> > > >
> > > > >
> > > >
> > > > > RC8 Dom 0 Kernel 2.6.30 RC6 on OpenSUSE 11.1 Linux 32-bit host
> > > >
> > > > > operating
> > > >
> > > > >
> > > >
> > > > > system.
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Please see screenshots here:
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > >
> >
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
> >
> > > > [
> >
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-vi
> >
> <http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > i> ]
> > > >
> > > >
> > > >
> > > > >
> > > >
> > > > [
> >
> <http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > >
> >
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > > > [
> >
> <http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > >
> >
> http://teo-en-ming-aka-zhang-enming.blogspot.com/2009/07/my-windows-7-hvm-v
> > ]
> > > >
> > > > i]
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > rtual-machine-on-xen.html
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > I have uploaded 24 pictures so far at the time of this writing.
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Regards,
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > > >
> > > > >
> > > >
> > > > > BEng(Hons)(Mechanical Engineering)
> > > >
> > > > >
> > > >
> > > > > Technical Support Engineer
> > > >
> > > > >
> > > >
> > > > > Information Technology Department
> > > >
> > > > >
> > > >
> > > > > Asiasoft Online Pte Ltd
> > > >
> > > > >
> > > >
> > > > > Tampines Central 1 #04-01 Tampines Plaza
> > > >
> > > > >
> > > >
> > > > > Singapore 529541
> > > >
> > > > >
> > > >
> > > > > Republic of Singapore
> > > >
> > > > >
> > > >
> > > > > Mobile: +65-9648-9798
> > > >
> > > > >
> > > >
> > > > > MSN: teoenming@hotmail.com
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > -----Original Message-----
> > > >
> > > > >
> > > >
> > > > > From: xen-devel-bounces@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > [mailto: xen-devel-bounces@lists.xensource.com] On Behalf Of Pasi
> > > >
> > > > > Kärkkäinen
> > > >
> > > > >
> > > >
> > > > > Sent: Monday, July 27, 2009 11:24 PM
> > > >
> > > > >
> > > >
> > > > > To: Teo En Ming
> > > >
> > > > >
> > > >
> > > > > Cc: Boris Derzhavets; xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> > > >
> > > > > Jeremy's PVOPS
> > > >
> > > > >
> > > >
> > > > > Kernel
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > On Mon, Jul 27, 2009 at 10:57:23PM +0800, Teo En Ming wrote:
> > > >
> > > > >
> > > >
> > > > > > Dear Pasi,
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Any idea on what benchmark tools I can use to measure I/O
> > > >
> > > > > performance of
> > > >
> > > > >
> > > >
> > > > > my
> > > >
> > > > >
> > > >
> > > > > > virtual machines?
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > Well for simple streaming IO tests you can use dd, it supports
> > > >
> > > > > multiple
> > > >
> > > > >
> > > >
> > > > > block sizes, O_DIRECT etc.
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > If you need multithreaded/multiprocess tests, or filesystem IO
> > > >
> > > > > tests, then
> > > >
> > > > >
> > > >
> > > > > you need something more sophisticated.. bonnie++, ltp disktest,
> > > >
> > > > > fio, iozone
> > > >
> > > > >
> > > >
> > > > > etc. Google is your friend.
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > -- Pasi
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > > Thank you.
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Mr. Teo En Ming (Zhang Enming) Dip(Mechatronics Engineering)
> > > >
> > > > >
> > > >
> > > > > > BEng(Hons)(Mechanical Engineering)
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Technical Support Engineer
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Information Technology Department
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Asiasoft Online Pte Ltd
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Tampines Central 1 #04-01 Tampines Plaza
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Singapore 529541
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Republic of Singapore
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Mobile Phone: +65-9648-9798
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > MSN: teoenming@hotmail.com
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > -----Original Message-----
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > From: Pasi Kärkkäinen < pasik@iki.fi>
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > To: Teo En Ming <enming.teo@asiasoftsea.net >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Cc: Boris Derzhavets <bderzhavets@yahoo.com>,
> > > >
> > > > >
> > > >
> > > > > xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Date: Mon, 27 Jul 2009 18:01:55 +0300
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Subject: Re: [Xen-devel] Unable to Configure Xen Dom 0 in
> > > >
> > > > > Jeremy's PVOPS
> > > >
> > > > >
> > > >
> > > > > > Kernel
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > On Mon, Jul 27, 2009 at 10:06:55PM +0800, Teo En Ming wrote:
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > Dear Boris,
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > Based on your given information, I have managed to
> > > >
> > > > > configure static IP
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > address inside OpenSolaris UNIX PV guest.
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > These are the two crucial lines:
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > echo 192.168.1.45 netmask 255.255.255.0 mtu 1492 >
> > > >
> > > > > /etc/hostname.xnf0
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > echo 192.168.1.102 > /etc/defaultrouter
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > Please see screenshot here:
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > >
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
> >
> > > > [
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s1
> >
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > 1> ]
> > > >
> > > >
> > > >
> > > > >
> > > >
> > > > [
> >
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > >
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > > [
> >
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > >
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > ]
> > > >
> > > > 1]
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > 600-h/03.jpeg
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > [
> >
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > >
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > > [
> >
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > >
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > ]
> > > >
> > > >
> > > >
> > > > >
> > > >
> > > > [
> >
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > >
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > > [
> >
> http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> >
> <http://3.bp.blogspot.com/_zzjv8MCM2sk/Sm21uPKvVXI/AAAAAAAAAKU/NDQqKSld5v4/s
> > > ]
> > > >
> > > > ]
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > 1600-h/03.jpeg]
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > May I know whether there are any PV device drivers for
> > > >
> > > > > me to install to
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > improve PV guests' performance? What are the
> > > >
> > > > > recommended benchmark tools
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > > to
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > > measure I/O performance of PV guests?
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > PV guest doesn't need any additional drivers. Like the name
> > > >
> > > > > PV says, it's
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > paravirtual, and uses the optimized drivers/interfaces
> > > >
> > > > > out-of-the-box.
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > -- Pasi
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > _______________________________________________
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Xen-devel mailing list
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > Xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > >
> > > >
> > > > >
> > > >
> > > > > > http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]
> > > >
> > > > > [ <http://lists.xensource.com/xen-devel>
> > http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]]
> > > >
> > > > >
> > > >
> > > > > [ http://lists.xensource.com/xen-devel
> > <http://lists.xensource.com/xen-devel>
> > > > [http://lists.xensource.com/xen-devel]
> > > >
> > > > > [ <http://lists.xensource.com/xen-devel>
> > http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]]]
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > _______________________________________________
> > > >
> > > > >
> > > >
> > > > > Xen-devel mailing list
> > > >
> > > > >
> > > >
> > > > > Xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]
> > > >
> > > > [http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]]
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > No virus found in this incoming message.
> > > >
> > > > >
> > > >
> > > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > [http://www.avg.com/
> > > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > > >
> > > > >
> > > >
> > > > > Version: 8.5.339 / Virus Database: 270.13.31/2265 - Release Date:
> > > >
> > > > > 07/26/09
> > > >
> > > > >
> > > >
> > > > > 17:59:00
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > No virus found in this outgoing message.
> > > >
> > > > >
> > > >
> > > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > [http://www.avg.com/
> > > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > > >
> > > > >
> > > >
> > > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > > >
> > > > > 07/27/09
> > > >
> > > > >
> > > >
> > > > > 17:59:00
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > _______________________________________________
> > > >
> > > > >
> > > >
> > > > > Xen-devel mailing list
> > > >
> > > > >
> > > >
> > > > > Xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]
> > > >
> > > > [http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]]
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > No virus found in this incoming message.
> > > >
> > > > >
> > > >
> > > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > [http://www.avg.com/
> > > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > > >
> > > > >
> > > >
> > > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > > >
> > > > > 07/27/09
> > > >
> > > > >
> > > >
> > > > > 17:59:00
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > No virus found in this outgoing message.
> > > >
> > > > >
> > > >
> > > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > [http://www.avg.com/
> > > > [ http://www.avg.com/ <http://www.avg.com/> ]]
> > > >
> > > > >
> > > >
> > > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > > >
> > > > > 07/27/09
> > > >
> > > > >
> > > >
> > > > > 17:59:00
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > >
> > > >
> > > > > _______________________________________________
> > > >
> > > > >
> > > >
> > > > > Xen-devel mailing list
> > > >
> > > > >
> > > >
> > > > > Xen-devel@lists.xensource.com
> > > >
> > > > >
> > > >
> > > > > http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]
> > > >
> > > > [http://lists.xensource.com/xen-devel
> > > > [http://lists.xensource.com/xen-devel]]
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > >
> > > > Xen-devel mailing list
> > > >
> > > > Xen-devel@lists.xensource.com
> > > >
> > > > http://lists.xensource.com/xen-devel [
> > <http://lists.xensource.com/xen-devel>
> > http://lists.xensource.com/xen-devel]
> > > >
> > > >
> > > >
> > > > No virus found in this incoming message.
> > > >
> > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > > >
> > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > 07/27/09
> > > >
> > > > 17:59:00
> > > >
> > > >
> > > >
> > > > No virus found in this outgoing message.
> > > >
> > > > Checked by AVG - www.avg.com [http://www.avg.com/]
> > > >
> > > > Version: 8.5.375 / Virus Database: 270.13.31/2265 - Release Date:
> > 07/27/09
> > > >
> > > > 17:59:00
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > >
> > > > Xen-devel mailing list
> > > >
> > > > Xen-devel@lists.xensource.com
> > > >
> > > > http://lists.xensource.com/xen-devel [
> > <http://lists.xensource.com/xen-devel>
> > http://lists.xensource.com/xen-devel]
> > >
> > > _______________________________________________
> > > Xen-devel mailing list
> > > Xen-devel@lists.xensource.com
> > > http://lists.xensource.com/xen-devel
> > >
> > >
> > >
> > >
> >
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xensource.com
> > http://lists.xensource.com/xen-devel
> >
> >
> >
> > Checked by AVG - www.avg.com
> > Version: 8.5.375 / Virus Database: 270.13.33/2267 - Release Date: 07/27/09
> > 17:59:00
> >
> > Checked by AVG - www.avg.com
> > Version: 8.5.375 / Virus Database: 270.13.33/2267 - Release Date: 07/28/09
> > 17:58:00
> >
> >
>
> Checked by AVG - www.avg.com
> Version: 8.5.375 / Virus Database: 270.13.35/2269 - Release Date: 07/28/09
> 17:58:00
>
> Checked by AVG - www.avg.com
> Version: 8.5.375 / Virus Database: 270.13.35/2269 - Release Date: 07/28/09
> 17:58:00
>
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
> Checked by AVG - www.avg.com
> Version: 8.5.375 / Virus Database: 270.13.35/2269 - Release Date: 07/28/09
> 17:58:00
>
> Checked by AVG - www.avg.com
> Version: 8.5.375 / Virus Database: 270.13.35/2269 - Release Date: 07/28/09
> 17:58:00
>
>
^ permalink raw reply [flat|nested] 86+ messages in thread
end of thread, other threads:[~2009-07-29 13:32 UTC | newest]
Thread overview: 86+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-07-25 17:24 Unable to Configure Xen Dom 0 in Jeremy's PVOPS Kernel Boris Derzhavets
2009-07-26 2:42 ` Mr. Teo En Ming (Zhang Enming)
2009-07-26 2:50 ` Mr. Teo En Ming (Zhang Enming)
2009-07-26 5:16 ` Mr. Teo En Ming (Zhang Enming)
-- strict thread matches above, loose matches on Subject: below --
2009-07-29 4:25 Boris Derzhavets
2009-07-29 4:19 ` Teo En Ming
2009-07-29 13:07 ` Teo En Ming (Zhang Enming)
2009-07-29 13:23 ` Pasi Kärkkäinen
2009-07-29 13:26 ` Teo En Ming (Zhang Enming)
2009-07-29 13:29 ` Pasi Kärkkäinen
2009-07-29 13:30 ` Teo En Ming (Zhang Enming)
2009-07-29 13:29 ` Teo En Ming (Zhang Enming)
2009-07-29 13:32 ` Pasi Kärkkäinen
2009-07-28 15:10 Boris Derzhavets
2009-07-28 13:49 Boris Derzhavets
2009-07-28 14:24 ` Pasi Kärkkäinen
2009-07-28 12:52 Boris Derzhavets
2009-07-28 11:19 Boris Derzhavets
2009-07-28 11:25 ` Teo En Ming
2009-07-28 11:59 ` Pasi Kärkkäinen
2009-07-28 12:32 ` Pasi Kärkkäinen
2009-07-28 12:27 ` Teo En Ming
2009-07-28 12:48 ` Pasi Kärkkäinen
2009-07-28 13:05 ` Teo En Ming
2009-07-27 14:59 Boris Derzhavets
2009-07-27 13:15 Boris Derzhavets
2009-07-27 13:46 ` Teo En Ming
2009-07-27 14:06 ` Teo En Ming
2009-07-27 15:01 ` Pasi Kärkkäinen
2009-07-27 14:57 ` Teo En Ming
2009-07-27 15:24 ` Pasi Kärkkäinen
2009-07-28 5:13 ` Teo En Ming (Zhang Enming)
2009-07-28 11:13 ` Teo En Ming (Zhang Enming)
2009-07-28 11:07 ` Teo En Ming
2009-07-27 11:17 Boris Derzhavets
2009-07-27 10:18 Boris Derzhavets
2009-07-27 10:15 Boris Derzhavets
2009-07-27 10:22 ` Teo En Ming
2009-07-27 11:25 ` Teo En Ming
2009-07-27 8:57 Boris Derzhavets
2009-07-27 9:57 ` Teo En Ming
2009-07-27 5:01 Boris Derzhavets
2009-07-27 4:58 ` Teo En Ming
2009-07-26 9:30 Boris Derzhavets
[not found] <295366.71800.qm@web56102.mail.re3.yahoo.com>
2009-07-26 9:08 ` Mr. Teo En Ming (Zhang Enming)
2009-07-26 9:03 Boris Derzhavets
2009-07-25 18:13 Boris Derzhavets
2009-07-26 2:44 ` Mr. Teo En Ming (Zhang Enming)
2009-07-25 11:45 Boris Derzhavets
2009-07-25 16:32 ` Mr. Teo En Ming (Zhang Enming)
2009-07-24 17:57 Re[8]: " Boris Derzhavets
2009-07-24 18:27 ` Teo En Ming
2009-07-24 18:31 ` Teo En Ming
2009-07-25 11:14 ` Mr. Teo En Ming (Zhang Enming)
2009-07-22 13:36 Boris Derzhavets
2009-07-22 13:59 ` Teo En Ming
2009-07-22 13:25 Boris Derzhavets
2009-07-22 12:57 Boris Derzhavets
2009-07-22 13:00 ` Teo En Ming
2009-07-22 13:16 ` Teo En Ming
2009-07-22 13:33 ` Pasi Kärkkäinen
2009-07-22 13:31 ` Pasi Kärkkäinen
2009-07-22 14:10 ` Teo En Ming
2009-07-22 12:36 Teo En Ming
2009-07-22 13:30 ` Pasi Kärkkäinen
2009-07-22 13:54 ` Teo En Ming
2009-07-22 15:40 ` Teo En Ming
2009-07-22 15:47 ` Teo En Ming
2009-07-22 16:04 ` Pasi Kärkkäinen
2009-07-22 16:27 ` Pasi Kärkkäinen
2009-07-22 16:52 ` Teo En Ming (Zhang Enming)
2009-07-22 17:17 ` Teo En Ming (Zhang Enming)
2009-07-22 17:32 ` Pasi Kärkkäinen
2009-07-23 2:21 ` Teo En Ming
2009-07-23 2:42 ` Teo En Ming
2009-07-23 3:27 ` Teo En Ming
2009-07-23 3:20 ` Teo En Ming
2009-07-23 9:19 ` Teo En Ming
2009-07-23 9:12 ` Teo En Ming
2009-07-23 10:02 ` Teo En Ming
2009-07-23 10:09 ` Pasi Kärkkäinen
2009-07-23 10:06 ` Teo En Ming
2009-07-23 10:19 ` Pasi Kärkkäinen
2009-07-23 10:25 ` Teo En Ming
2009-07-23 10:30 ` Teo En Ming
2009-07-23 10:41 ` Pasi Kärkkäinen
2009-07-23 11:52 ` Teo En Ming
2009-07-23 16:13 ` Teo En Ming
2009-07-23 19:21 ` Pasi Kärkkäinen
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.