* Master channel is only mono @ 2009-07-29 15:11 Sune Mølgaard 2009-07-29 15:35 ` Takashi Iwai 0 siblings, 1 reply; 3+ messages in thread From: Sune Mølgaard @ 2009-07-29 15:11 UTC (permalink / raw) To: alsa-devel As per gnubien's advice on #alsa on irc.freenode.net, I have run alsa-info.sh - the URL is http://www.alsa-project.org/db/?f=fbe93f301ca214007e66c521cd6c41a17a604c79 . My problem is that the master channel for my card is shown to be mono only, which I don't think seems right... Also, sound in general is rather low. My system is a very new Dell Studio laptop - I have loaded snd-hda-intel with mode=dell-m6 as per the kernel documentation. Best regards, Sune Mølgaard ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Master channel is only mono 2009-07-29 15:11 Master channel is only mono Sune Mølgaard @ 2009-07-29 15:35 ` Takashi Iwai 2009-07-29 16:12 ` Sune Mølgaard 0 siblings, 1 reply; 3+ messages in thread From: Takashi Iwai @ 2009-07-29 15:35 UTC (permalink / raw) To: Sune Mølgaard; +Cc: alsa-devel At Wed, 29 Jul 2009 17:11:59 +0200, Sune Mølgaard wrote: > > As per gnubien's advice on #alsa on irc.freenode.net, I have run > alsa-info.sh - the URL is > http://www.alsa-project.org/db/?f=fbe93f301ca214007e66c521cd6c41a17a604c79 . Better to run alsa-info.sh with --no-upload and attach it instead of URL. > My problem is that the master channel for my card is shown to be mono > only, which I don't think seems right... Mono is correct. You have other mixer elements for left/right volume balance. > Also, sound in general is rather low. I guess you didn't raise headphone and speaker volumes. HTH, Takashi ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Master channel is only mono 2009-07-29 15:35 ` Takashi Iwai @ 2009-07-29 16:12 ` Sune Mølgaard 0 siblings, 0 replies; 3+ messages in thread From: Sune Mølgaard @ 2009-07-29 16:12 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel Takashi Iwai wrote: > At Wed, 29 Jul 2009 17:11:59 +0200, > Sune Mølgaard wrote: >> >> As per gnubien's advice on #alsa on irc.freenode.net, I have run >> alsa-info.sh - the URL is >> http://www.alsa-project.org/db/?f=fbe93f301ca214007e66c521cd6c41a17a604c79 . > > Better to run alsa-info.sh with --no-upload and attach it instead > of URL. Sorry about that. I was instructed otherwise... >> My problem is that the master channel for my card is shown to be mono >> only, which I don't think seems right... > > Mono is correct. > You have other mixer elements for left/right volume balance. Could you recommend to me a mixer program that can access them, then? alsamixer only shows Master, Headphone, Headphone 1, PCM, Digital Input Source [Digital Mic 1], Digital Input Source 1 [Analog Inputs] and Speaker. Same goes for the gnome mixer with all inputs selected... >> Also, sound in general is rather low. > > I guess you didn't raise headphone and speaker volumes. Nope, Master, Speaker, and PCM are at max. > > HTH, > > Takashi Thank you for your input, but it would seem that I still need some advice... Best regards, Sune ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-07-29 16:12 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-07-29 15:11 Master channel is only mono Sune Mølgaard 2009-07-29 15:35 ` Takashi Iwai 2009-07-29 16:12 ` Sune Mølgaard
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.