* Re: [Xenomai-help] Negative Latency results
2009-08-27 11:27 ` Gilles Chanteperdrix
@ 2009-08-27 11:50 ` Christoph Permes
2009-08-27 12:05 ` Gilles Chanteperdrix
0 siblings, 1 reply; 8+ messages in thread
From: Christoph Permes @ 2009-08-27 11:50 UTC (permalink / raw)
To: Gilles Chanteperdrix; +Cc: xenomai
[-- Attachment #1: Type: text/plain, Size: 1559 bytes --]
Hi,
I'm working together with Peter on the latency problem.
I have attached our kernel configuration and the boot log to this mail.
We have tried out configuring a latency between 0 and 10000 but this
didn't help.
Christoph
Am Donnerstag, den 27.08.2009, 13:27 +0200 schrieb Gilles Chanteperdrix:
> Peter Puchwein wrote:
> > Gilles Chanteperdrix wrote:
> >> Peter Puchwein wrote:
> >>> Hi,
> >>>
> >>> what does a negative latency in the latency-test mean?
> >>>
> >>> RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat
> >>> worst
> >>> RTD| -56.443| -54.519| -33.519| 0| -57.020|
> >>> -28.208
> >
> > Hi Gilles,
> >
> >> It means that the timer handler ticked before the date it was supposed
> >> to tick. This may have several causes:
> >> - /proc/xenomai/latency is too high, adjust it
> >
> > where can the latency be configured?
>
> in /proc/xenomai/latency
>
> >
> >> - hardware things stop the hardware counter used for timing, or slow it
> >> down, such as cpufreq, acpi_processor or even the bios on x86.
> >
> > we've checked all config settings due to ACPI and they seem to be ok.
>
> Please show us your .config and boot logs.
>
> >
> > We can live with this small negative latency, are there any known
> > negative effects of the negative latency or can we just leave it.
>
> well 50us early is not exactly "small". A typical latency on x86 is
> under 20us, so -50 is way off. It is probably the sign that the timing
> is broken, so, it should be investigated and resolved IMO.
>
>
[-- Attachment #2: config-2.6.29.5-xenomai-2.4.9 --]
[-- Type: text/plain, Size: 59692 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29.5
# Thu Aug 20 16:18:10 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-xenomai-2.4.9"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Real-time sub-system
#
CONFIG_XENOMAI=y
CONFIG_XENO_GENERIC_STACKPOOL=y
CONFIG_XENO_OPT_NUCLEUS=y
CONFIG_XENO_OPT_PERVASIVE=y
# CONFIG_XENO_OPT_ISHIELD is not set
CONFIG_XENO_OPT_PRIOCPL=y
CONFIG_XENO_OPT_PIPELINE_HEAD=y
CONFIG_XENO_OPT_PIPE=y
CONFIG_XENO_OPT_PIPE_NRDEV=256
CONFIG_XENO_OPT_REGISTRY=y
CONFIG_XENO_OPT_REGISTRY_NRSLOTS=1024
CONFIG_XENO_OPT_SYS_HEAPSZ=1024
CONFIG_XENO_OPT_SYS_STACKPOOLSZ=128
CONFIG_XENO_OPT_STATS=y
CONFIG_XENO_OPT_DEBUG=y
# CONFIG_XENO_OPT_DEBUG_NUCLEUS is not set
# CONFIG_XENO_OPT_DEBUG_QUEUES is not set
# CONFIG_XENO_OPT_DEBUG_REGISTRY is not set
# CONFIG_XENO_OPT_DEBUG_TIMERS is not set
CONFIG_XENO_OPT_WATCHDOG=y
CONFIG_XENO_OPT_WATCHDOG_TIMEOUT=4
# CONFIG_XENO_OPT_SHIRQ is not set
#
# Timing
#
# CONFIG_XENO_OPT_TIMING_PERIODIC is not set
CONFIG_XENO_OPT_TIMING_SCHEDLAT=0
#
# Scalability
#
# CONFIG_XENO_OPT_SCALABLE_SCHED is not set
CONFIG_XENO_OPT_TIMER_LIST=y
# CONFIG_XENO_OPT_TIMER_HEAP is not set
# CONFIG_XENO_OPT_TIMER_WHEEL is not set
#
# Machine
#
CONFIG_XENO_HW_FPU=y
#
# NMI watchdog
#
# CONFIG_XENO_HW_NMI_DEBUG_LATENCY is not set
#
# SMI workaround
#
# CONFIG_XENO_HW_SMI_DETECT_DISABLE is not set
CONFIG_XENO_HW_SMI_DETECT=y
# CONFIG_XENO_HW_SMI_WORKAROUND is not set
#
# Interfaces
#
CONFIG_XENO_SKIN_NATIVE=y
CONFIG_XENO_OPT_NATIVE_PERIOD=0
CONFIG_XENO_OPT_NATIVE_PIPE=y
CONFIG_XENO_OPT_NATIVE_PIPE_BUFSZ=1024
CONFIG_XENO_OPT_NATIVE_REGISTRY=y
CONFIG_XENO_OPT_NATIVE_SEM=y
CONFIG_XENO_OPT_NATIVE_EVENT=y
CONFIG_XENO_OPT_NATIVE_MUTEX=y
CONFIG_XENO_OPT_NATIVE_COND=y
CONFIG_XENO_OPT_NATIVE_QUEUE=y
CONFIG_XENO_OPT_NATIVE_HEAP=y
CONFIG_XENO_OPT_NATIVE_ALARM=y
CONFIG_XENO_OPT_NATIVE_MPS=y
# CONFIG_XENO_OPT_NATIVE_INTR is not set
CONFIG_XENO_OPT_DEBUG_NATIVE=y
CONFIG_XENO_SKIN_POSIX=y
CONFIG_XENO_OPT_POSIX_PERIOD=0
# CONFIG_XENO_OPT_POSIX_SHM is not set
# CONFIG_XENO_OPT_POSIX_INTR is not set
# CONFIG_XENO_OPT_POSIX_SELECT is not set
CONFIG_XENO_OPT_DEBUG_POSIX=y
# CONFIG_XENO_SKIN_PSOS is not set
# CONFIG_XENO_SKIN_UITRON is not set
# CONFIG_XENO_SKIN_VRTX is not set
# CONFIG_XENO_SKIN_VXWORKS is not set
# CONFIG_XENO_SKIN_RTAI is not set
CONFIG_XENO_SKIN_RTDM=y
CONFIG_XENO_OPT_RTDM_PERIOD=0
CONFIG_XENO_OPT_RTDM_FILDES=128
# CONFIG_XENO_OPT_RTDM_SELECT is not set
CONFIG_XENO_OPT_DEBUG_RTDM=y
#
# Drivers
#
#
# Serial drivers
#
# CONFIG_XENO_DRIVERS_16550A is not set
#
# Testing drivers
#
CONFIG_XENO_KLATENCY_MODULE=m
# CONFIG_XENO_DRIVERS_TIMERBENCH is not set
# CONFIG_XENO_DRIVERS_IRQBENCH is not set
# CONFIG_XENO_DRIVERS_SWITCHTEST is not set
#
# CAN drivers
#
# CONFIG_XENO_DRIVERS_CAN is not set
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not set
# CONFIG_X86_RDC321X is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR_32=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=2
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_IPIPE=y
CONFIG_IPIPE_DOMAINS=4
CONFIG_IPIPE_COMPAT=y
CONFIG_IPIPE_DELAYED_ATOMICSW=y
# CONFIG_IPIPE_UNMASKED_CONTEXT_SWITCH is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
# CONFIG_X86_PM_TIMER is not set
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_INGRESS is not set
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_CS5536 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000E=m
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_BNX2=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_GREENASIA_FF is not set
# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_IPIPE_DEBUG is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_MMIOTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_LGUEST is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: dmesg.txt --]
[-- Type: text/plain; name="dmesg.txt"; charset="UTF-8", Size: 47542 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.29.5-xenomai-2.4.9 (root@domain.hid) (gcc version 4.2.4 (Debian 4.2.4-4)) #1 SMP Thu Aug 20 16:47:49 CEST 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6f0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6f0000 - 000000003f700000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.2 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] last_pfn = 0x3f6f0 max_arch_pfn = 0x100000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] ACPI Error (tbxfroot-0219): A valid RSDP was not found [20081204]
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 00000000 - 377fe000
[ 0.000000] bootmap 00011000 - 00017f00
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00016ea17c] TEXT DATA BSS ==> [0001000000 - 00016ea17c]
[ 0.000000] #4 [00016eb000 - 00016f2000] INIT_PG_TABLE ==> [00016eb000 - 00016f2000]
[ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00f4d10] 000f4d10
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f6f0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f6f0
[ 0.000000] On node 0 totalpages: 259711
[ 0.000000] free_area_init_node: node 0, pgdat c155c500, node_mem_map c16f2200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 254 pages used for memmap
[ 0.000000] HighMem zone: 32244 pages, LIFO batch:7
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] MPTABLE: OEM ID: OEM00000
[ 0.000000] MPTABLE: Product ID: PROD00000000
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f700000:a0900000)
[ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Allocating 40960 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257681
[ 0.000000] Kernel command line: auto BOOT_IMAGE=Linux ro root=341 xeno_nucleus.xenomai_gid=1002
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1499.959 MHz processor.
[ 0.000999] I-pipe 2.4-02: pipeline enabled.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000999] Memory: 1022304k/1039296k available (3590k kernel code, 16200k reserved, 1997k data, 348k init, 129992k highmem)
[ 0.000999] virtual kernel memory layout:
[ 0.000999] fixmap : 0xfff9f000 - 0xfffff000 ( 384 kB)
[ 0.000999] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000999] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000999] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000999] .init : 0xc157c000 - 0xc15d3000 ( 348 kB)
[ 0.000999] .data : 0xc1381be1 - 0xc15751d8 (1997 kB)
[ 0.000999] .text : 0xc1000000 - 0xc1381be1 (3590 kB)
[ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.001009] Calibrating delay loop (skipped), value calculated using timer frequency.. 2999.91 BogoMIPS (lpj=1499959)
[ 0.001273] Security Framework initialized
[ 0.001389] SELinux: Initializing.
[ 0.001513] SELinux: Starting in permissive mode
[ 0.001521] Mount-cache hash table entries: 512
[ 0.001800] Initializing cgroup subsys ns
[ 0.001917] Initializing cgroup subsys cpuacct
[ 0.002020] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.002218] CPU: L2 cache: 4096K
[ 0.002333] CPU: Physical Processor ID: 0
[ 0.002450] CPU: Processor Core ID: 0
[ 0.002602] Checking 'hlt' instruction... OK.
[ 0.006803] ExtINT not setup in hardware but reported by MP table
[ 0.007220] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.017345] CPU0: Intel(R) Core(TM)2 CPU L7400 @ 1.50GHz stepping 06
[ 0.119135] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Calibrating delay using timer specific routine.. 2999.55 BogoMIPS (lpj=1499779)
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 4096K
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.192016] CPU1: Intel(R) Core(TM)2 CPU L7400 @ 1.50GHz stepping 06
[ 0.193170] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.194002] Brought up 2 CPUs
[ 0.194113] Total of 2 processors activated (5999.47 BogoMIPS).
[ 0.195064] khelper used greatest stack depth: 7012 bytes left
[ 0.195218] net_namespace: 996 bytes
[ 0.195404] NET: Registered protocol family 16
[ 0.198173] PCI: PCI BIOS revision 3.00 entry at 0xfb0f0, last bus=3
[ 0.198291] PCI: Using configuration type 1 for base access
[ 0.198446] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.198446] mtrr: probably your BIOS does not setup all CPUs.
[ 0.198446] mtrr: corrected configuration.
[ 0.207021] bio: create slab <bio-0> at 0
[ 0.207158] ACPI: Interpreter disabled.
[ 0.208076] SCSI subsystem initialized
[ 0.208105] libata version 3.00 loaded.
[ 0.208996] usbcore: registered new interface driver usbfs
[ 0.209142] usbcore: registered new interface driver hub
[ 0.209142] usbcore: registered new device driver usb
[ 0.209143] PCI: Probing PCI hardware
[ 0.210014] PCI: Probing PCI hardware (bus 00)
[ 0.210070] pci 0000:00:02.0: reg 10 32bit mmio: [0xfdf00000-0xfdf7ffff]
[ 0.210070] pci 0000:00:02.0: reg 14 io port: [0xef00-0xef07]
[ 0.210070] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.210070] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfdf80000-0xfdfbffff]
[ 0.210125] pci 0000:00:02.1: reg 10 32bit mmio: [0xfde80000-0xfdefffff]
[ 0.210288] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.210417] pci 0000:00:1c.0: PME# disabled
[ 0.210619] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.210761] pci 0000:00:1c.1: PME# disabled
[ 0.211072] pci 0000:00:1d.0: reg 20 io port: [0xee00-0xee1f]
[ 0.211138] pci 0000:00:1d.1: reg 20 io port: [0xed00-0xed1f]
[ 0.211205] pci 0000:00:1d.2: reg 20 io port: [0xec00-0xec1f]
[ 0.211271] pci 0000:00:1d.3: reg 20 io port: [0xeb00-0xeb1f]
[ 0.211322] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]
[ 0.211394] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.211521] pci 0000:00:1d.7: PME# disabled
[ 0.211815] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.211822] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.211972] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.212103] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0290 (mask 0007)
[ 0.212322] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.212331] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.212340] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.212349] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.212358] pci 0000:00:1f.1: reg 20 io port: [0xe800-0xe80f]
[ 0.212407] pci 0000:00:1f.2: reg 10 io port: [0xe700-0xe707]
[ 0.212416] pci 0000:00:1f.2: reg 14 io port: [0xe600-0xe603]
[ 0.212425] pci 0000:00:1f.2: reg 18 io port: [0xe500-0xe507]
[ 0.212434] pci 0000:00:1f.2: reg 1c io port: [0xe400-0xe403]
[ 0.212443] pci 0000:00:1f.2: reg 20 io port: [0xe300-0xe30f]
[ 0.212452] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffc000-0xfdffc3ff]
[ 0.212495] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.212618] pci 0000:00:1f.2: PME# disabled
[ 0.212792] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.213030] pci 0000:01:00.0: reg 10 32bit mmio: [0xfcfe0000-0xfcffffff]
[ 0.213045] pci 0000:01:00.0: reg 14 32bit mmio: [0xfc800000-0xfcbfffff]
[ 0.213060] pci 0000:01:00.0: reg 18 io port: [0xbf00-0xbf1f]
[ 0.213188] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.213315] pci 0000:01:00.0: PME# disabled
[ 0.213502] pci 0000:00:1c.0: bridge io port: [0xb000-0xbfff]
[ 0.213509] pci 0000:00:1c.0: bridge 32bit mmio: [0xfc800000-0xfcffffff]
[ 0.213518] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
[ 0.213578] pci 0000:02:00.0: reg 10 32bit mmio: [0xfd7e0000-0xfd7fffff]
[ 0.213593] pci 0000:02:00.0: reg 14 32bit mmio: [0xfd000000-0xfd3fffff]
[ 0.213608] pci 0000:02:00.0: reg 18 io port: [0xaf00-0xaf1f]
[ 0.213736] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.213861] pci 0000:02:00.0: PME# disabled
[ 0.214041] pci 0000:00:1c.1: bridge io port: [0xa000-0xafff]
[ 0.214047] pci 0000:00:1c.1: bridge 32bit mmio: [0xfd000000-0xfd7fffff]
[ 0.214056] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff]
[ 0.214102] pci 0000:03:08.0: reg 10 32bit mmio: [0xfdaff000-0xfdafffff]
[ 0.214111] pci 0000:03:08.0: reg 14 io port: [0xcf00-0xcf3f]
[ 0.214176] pci 0000:03:08.0: supports D1 D2
[ 0.214179] pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.214306] pci 0000:03:08.0: PME# disabled
[ 0.214463] pci 0000:00:1e.0: transparent bridge
[ 0.214580] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[ 0.214587] pci 0000:00:1e.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
[ 0.214596] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff]
[ 0.216473] pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.216602] pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.216735] pci 0000:00:1c.1: PCI->APIC IRQ transform: INT B -> IRQ 17
[ 0.216972] pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
[ 0.217096] pci 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
[ 0.217225] pci 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18
[ 0.217352] pci 0000:00:1d.3: PCI->APIC IRQ transform: INT D -> IRQ 16
[ 0.217479] pci 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23
[ 0.217624] pci 0000:00:1f.1: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.217744] pci 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19
[ 0.217870] pci 0000:00:1f.3: PCI->APIC IRQ transform: INT B -> IRQ 19
[ 0.217982] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.218107] pci 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
[ 0.218233] pci 0000:03:08.0: PCI->APIC IRQ transform: INT A -> IRQ 20
[ 0.220982] NetLabel: Initializing
[ 0.221117] NetLabel: domain hash size = 128
[ 0.221233] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.221365] NetLabel: unlabeled traffic allowed by default
[ 0.221640] hpet clockevent registered
[ 0.221644] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.221771] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.222159] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.223996] pnp: PnP ACPI: disabled
[ 0.225483] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.225604] pci 0000:00:1c.0: IO window: 0xb000-0xbfff
[ 0.225730] pci 0000:00:1c.0: MEM window: 0xfc800000-0xfcffffff
[ 0.225860] pci 0000:00:1c.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[ 0.226044] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.226171] pci 0000:00:1c.1: IO window: 0xa000-0xafff
[ 0.226296] pci 0000:00:1c.1: MEM window: 0xfd000000-0xfd7fffff
[ 0.226420] pci 0000:00:1c.1: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
[ 0.226596] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.226718] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 0.227823] pci 0000:00:1e.0: MEM window: 0xfda00000-0xfdafffff
[ 0.227948] pci 0000:00:1e.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff
[ 0.228140] pci 0000:00:1c.0: setting latency timer to 64
[ 0.228155] pci 0000:00:1c.1: setting latency timer to 64
[ 0.228165] pci 0000:00:1e.0: setting latency timer to 64
[ 0.228170] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.228174] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.228177] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.228181] pci_bus 0000:01: resource 1 mem: [0xfc800000-0xfcffffff]
[ 0.228184] pci_bus 0000:01: resource 2 mem: [0xfdb00000-0xfdbfffff]
[ 0.228187] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
[ 0.228191] pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
[ 0.228194] pci_bus 0000:02: resource 1 mem: [0xfd000000-0xfd7fffff]
[ 0.228198] pci_bus 0000:02: resource 2 mem: [0xfdc00000-0xfdcfffff]
[ 0.228201] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[ 0.228204] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
[ 0.228207] pci_bus 0000:03: resource 1 mem: [0xfda00000-0xfdafffff]
[ 0.228211] pci_bus 0000:03: resource 2 mem: [0xfdd00000-0xfddfffff]
[ 0.228214] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.228218] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.228255] NET: Registered protocol family 2
[ 0.240541] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.241028] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.241717] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.242090] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.242207] TCP reno registered
[ 0.244632] NET: Registered protocol family 1
[ 0.245221] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.246629] Microcode Update Driver: v2.00 <tigran@domain.hid>, Peter Oruba
[ 0.247136] audit: initializing netlink socket (disabled)
[ 0.247275] type=2000 audit(1251276308.246:1): initialized
[ 0.257216] I-pipe: Domain Xenomai registered.
[ 0.257376] Xenomai: hal/i386 started.
[ 0.275916] Xenomai: real-time nucleus v2.4.9 (Big Bad Moon) loaded.
[ 0.276425] Xenomai: starting native API services.
[ 0.276549] Xenomai: starting POSIX services.
[ 0.276719] Xenomai: starting RTDM services.
[ 0.277052] highmem bounce pool size: 64 pages
[ 0.277187] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.281324] VFS: Disk quotas dquot_6.5.2
[ 0.281564] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.282822] msgmni has been set to 1743
[ 0.283094] SELinux: Registering netfilter hooks
[ 0.283812] alg: No test for stdrng (krng)
[ 0.284081] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.284263] io scheduler noop registered
[ 0.284393] io scheduler anticipatory registered
[ 0.284520] io scheduler deadline registered
[ 0.284647] io scheduler cfq registered (default)
[ 0.284776] pci 0000:00:02.0: Boot video device
[ 0.284790] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10
[ 0.284793] pci 0000:00:1d.0: Performing full reset
[ 0.284813] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.284816] pci 0000:00:1d.1: Performing full reset
[ 0.284834] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.284837] pci 0000:00:1d.2: Performing full reset
[ 0.284855] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.284858] pci 0000:00:1d.3: Performing full reset
[ 0.284925] pci 0000:03:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.285244] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.285323] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.285523] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.285598] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.285877] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.291116] Non-volatile memory driver v1.3
[ 0.291359] intel_rng: FWH not detected
[ 0.291698] Linux agpgart interface v0.103
[ 0.291902] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 0.293732] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 0.297432] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.297727] [drm] Initialized drm 1.1.0 20060810
[ 0.297885] pci 0000:00:02.0: setting latency timer to 64
[ 0.300676] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 0.300858] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.544635] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.723457] Switched to high resolution mode on CPU 1
[ 0.724467] Switched to high resolution mode on CPU 0
[ 0.786490] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.030233] serial8250: ttyS2 at I/O 0x3e8 (irq = 0) is a 16550A
[ 1.274220] serial8250: ttyS3 at I/O 0x2e8 (irq = 0) is a 16550A
[ 1.276975] brd: module loaded
[ 1.278234] loop: module loaded
[ 1.278426] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 1.278548] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.302863] e100: 0000:03:08.0: e100_eeprom_load: EEPROM corrupted
[ 1.302997] e100: probe of 0000:03:08.0 failed with error -11
[ 1.303296] sky2 driver version 1.22
[ 1.303664] console [netcon0] enabled
[ 1.303793] netconsole: network logging started
[ 1.303904] Uniform Multi-Platform E-IDE driver
[ 1.304220] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
[ 1.304378] piix 0000:00:1f.1: IDE port disabled
[ 1.304514] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 1.304655] ide0: BM-DMA at 0xe800-0xe807
[ 1.304789] Probing IDE interface ide0...
[ 1.772285] hdb: SanDisk SDCFX4-4096, CFA DISK drive
[ 1.823169] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO2
[ 1.823187] hdb: host side 80-wire cable detection failed, limiting max speed to UDMA33
[ 1.823369] hdb: UDMA/33 mode selected
[ 1.823569] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1.823941] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 1.824180] ide-gd driver 1.18
[ 1.824325] hdb: max request size: 128KiB
[ 1.824464] hdb: 8027712 sectors (4110 MB) w/1KiB Cache, CHS=7964/16/63
[ 1.824777] hdb: hdb1
[ 1.834016] Loading iSCSI transport class v2.0-870.
[ 1.834510] Driver 'sd' needs updating - please use bus_type methods
[ 1.834687] Driver 'sr' needs updating - please use bus_type methods
[ 1.835040] ata_piix 0000:00:1f.2: version 2.12
[ 1.835057] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 1.835551] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.835616] scsi0 : ata_piix
[ 1.835927] scsi1 : ata_piix
[ 1.836179] ata1: SATA max UDMA/133 cmd 0xe700 ctl 0xe600 bmdma 0xe300 irq 19
[ 1.836308] ata2: SATA max UDMA/133 cmd 0xe500 ctl 0xe400 bmdma 0xe308 irq 19
[ 1.990418] ata1.00: ATA-7: ST940817SM, 3.AAB, max UDMA/133
[ 1.990552] ata1.00: 78140160 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.996442] ata1.00: configured for UDMA/133
[ 1.996688] scsi 0:0:0:0: Direct-Access ATA ST940817SM 3.AA PQ: 0 ANSI: 5
[ 1.997160] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 1.997342] sd 0:0:0:0: [sda] Write Protect is off
[ 1.997462] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.997502] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.997784] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 1.997988] sd 0:0:0:0: [sda] Write Protect is off
[ 1.998126] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.998168] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.998341] sda: sda1 sda2 sda3 sda4
[ 2.043296] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.043582] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.205704] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.205830] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
[ 2.205874] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.205880] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.206101] drivers/usb/core/inode.c: creating file 'devices'
[ 2.206107] drivers/usb/core/inode.c: creating file '001'
[ 2.206197] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.206390] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[ 2.206395] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 2.206417] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 2.210313] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.210317] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 2.210329] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 2.210452] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 2.214331] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 2.220060] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.220244] usb usb1: default language 0x0409
[ 2.220256] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.220384] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.220550] usb usb1: Product: EHCI Host Controller
[ 2.220671] usb usb1: Manufacturer: Linux 2.6.29.5-xenomai-2.4.9 ehci_hcd
[ 2.220794] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.220966] usb usb1: uevent
[ 2.221037] usb usb1: usb_probe_device
[ 2.221041] usb usb1: configuration #1 chosen from 1 choice
[ 2.221166] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 2.221191] usb 1-0:1.0: uevent
[ 2.221250] hub 1-0:1.0: usb_probe_interface
[ 2.221254] hub 1-0:1.0: usb_probe_interface - got id
[ 2.221257] hub 1-0:1.0: USB hub found
[ 2.221380] hub 1-0:1.0: 8 ports detected
[ 2.221493] hub 1-0:1.0: standalone hub
[ 2.221496] hub 1-0:1.0: no power switching (usb 1.0)
[ 2.221499] hub 1-0:1.0: individual port over-current protection
[ 2.221502] hub 1-0:1.0: power on to power good time: 20ms
[ 2.221509] hub 1-0:1.0: local power source is good
[ 2.221513] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 2.221699] drivers/usb/core/inode.c: creating file '001'
[ 2.221849] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.221970] ohci_hcd: block sizes: ed 64 td 64
[ 2.222038] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.222199] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.222203] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.222399] drivers/usb/core/inode.c: creating file '002'
[ 2.222487] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.222662] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 2.222801] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.222804] uhci_hcd 0000:00:1d.0: Performing full reset
[ 2.222824] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ee00
[ 2.222984] usb usb2: default language 0x0409
[ 2.222996] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.223132] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.223305] usb usb2: Product: UHCI Host Controller
[ 2.223427] usb usb2: Manufacturer: Linux 2.6.29.5-xenomai-2.4.9 uhci_hcd
[ 2.223550] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.223733] usb usb2: uevent
[ 2.223791] usb usb2: usb_probe_device
[ 2.223794] usb usb2: configuration #1 chosen from 1 choice
[ 2.223918] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 2.223938] usb 2-0:1.0: uevent
[ 2.223996] hub 2-0:1.0: usb_probe_interface
[ 2.224001] hub 2-0:1.0: usb_probe_interface - got id
[ 2.224012] hub 2-0:1.0: USB hub found
[ 2.224155] hub 2-0:1.0: 2 ports detected
[ 2.224273] hub 2-0:1.0: standalone hub
[ 2.224275] hub 2-0:1.0: no power switching (usb 1.0)
[ 2.224278] hub 2-0:1.0: individual port over-current protection
[ 2.224281] hub 2-0:1.0: power on to power good time: 2ms
[ 2.224288] hub 2-0:1.0: local power source is good
[ 2.224291] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 2.224385] drivers/usb/core/inode.c: creating file '001'
[ 2.224502] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.224507] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.224698] drivers/usb/core/inode.c: creating file '003'
[ 2.224792] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.224961] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 2.225109] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.225112] uhci_hcd 0000:00:1d.1: Performing full reset
[ 2.225132] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ed00
[ 2.225336] usb usb3: default language 0x0409
[ 2.225348] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.225473] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.225645] usb usb3: Product: UHCI Host Controller
[ 2.225777] usb usb3: Manufacturer: Linux 2.6.29.5-xenomai-2.4.9 uhci_hcd
[ 2.225897] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.226108] usb usb3: uevent
[ 2.226167] usb usb3: usb_probe_device
[ 2.226170] usb usb3: configuration #1 chosen from 1 choice
[ 2.226297] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 2.226318] usb 3-0:1.0: uevent
[ 2.226376] hub 3-0:1.0: usb_probe_interface
[ 2.226378] hub 3-0:1.0: usb_probe_interface - got id
[ 2.226382] hub 3-0:1.0: USB hub found
[ 2.226506] hub 3-0:1.0: 2 ports detected
[ 2.226628] hub 3-0:1.0: standalone hub
[ 2.226631] hub 3-0:1.0: no power switching (usb 1.0)
[ 2.226634] hub 3-0:1.0: individual port over-current protection
[ 2.226637] hub 3-0:1.0: power on to power good time: 2ms
[ 2.226644] hub 3-0:1.0: local power source is good
[ 2.226647] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 2.226743] drivers/usb/core/inode.c: creating file '001'
[ 2.226857] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.226862] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.227056] drivers/usb/core/inode.c: creating file '004'
[ 2.227143] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.227315] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 2.227434] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.227437] uhci_hcd 0000:00:1d.2: Performing full reset
[ 2.227462] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00
[ 2.227624] usb usb4: default language 0x0409
[ 2.227635] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.227774] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.227947] usb usb4: Product: UHCI Host Controller
[ 2.228095] usb usb4: Manufacturer: Linux 2.6.29.5-xenomai-2.4.9 uhci_hcd
[ 2.228221] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.228399] usb usb4: uevent
[ 2.228457] usb usb4: usb_probe_device
[ 2.228461] usb usb4: configuration #1 chosen from 1 choice
[ 2.228587] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 2.228607] usb 4-0:1.0: uevent
[ 2.228665] hub 4-0:1.0: usb_probe_interface
[ 2.228667] hub 4-0:1.0: usb_probe_interface - got id
[ 2.228670] hub 4-0:1.0: USB hub found
[ 2.228789] hub 4-0:1.0: 2 ports detected
[ 2.228920] hub 4-0:1.0: standalone hub
[ 2.228922] hub 4-0:1.0: no power switching (usb 1.0)
[ 2.228925] hub 4-0:1.0: individual port over-current protection
[ 2.228928] hub 4-0:1.0: power on to power good time: 2ms
[ 2.228935] hub 4-0:1.0: local power source is good
[ 2.228938] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 2.229032] drivers/usb/core/inode.c: creating file '001'
[ 2.229151] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.229156] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.229373] drivers/usb/core/inode.c: creating file '005'
[ 2.229464] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.229635] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 2.229752] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.229755] uhci_hcd 0000:00:1d.3: Performing full reset
[ 2.229779] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000eb00
[ 2.229936] usb usb5: default language 0x0409
[ 2.229948] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.230111] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.230293] usb usb5: Product: UHCI Host Controller
[ 2.230412] usb usb5: Manufacturer: Linux 2.6.29.5-xenomai-2.4.9 uhci_hcd
[ 2.230535] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.230712] usb usb5: uevent
[ 2.230770] usb usb5: usb_probe_device
[ 2.230773] usb usb5: configuration #1 chosen from 1 choice
[ 2.230895] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 2.230915] usb 5-0:1.0: uevent
[ 2.230975] hub 5-0:1.0: usb_probe_interface
[ 2.230978] hub 5-0:1.0: usb_probe_interface - got id
[ 2.230981] hub 5-0:1.0: USB hub found
[ 2.231111] hub 5-0:1.0: 2 ports detected
[ 2.231228] hub 5-0:1.0: standalone hub
[ 2.231230] hub 5-0:1.0: no power switching (usb 1.0)
[ 2.231233] hub 5-0:1.0: individual port over-current protection
[ 2.231236] hub 5-0:1.0: power on to power good time: 2ms
[ 2.231243] hub 5-0:1.0: local power source is good
[ 2.231246] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 2.231342] drivers/usb/core/inode.c: creating file '001'
[ 2.231566] usbcore: registered new interface driver usblp
[ 2.231715] Initializing USB Mass Storage driver...
[ 2.231915] usbcore: registered new interface driver usb-storage
[ 2.232045] USB Mass Storage support registered.
[ 2.232240] usbcore: registered new interface driver libusual
[ 2.233505] PNP: No PS/2 controller found. Probing ports directly.
[ 2.321027] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
[ 2.321036] hub 1-0:1.0: port 1: status 0501 change 0001
[ 2.321051] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT
[ 2.321058] hub 1-0:1.0: port 2: status 0501 change 0001
[ 2.324044] uhci_hcd 0000:00:1d.0: port 1 portsc 008a,00
[ 2.324064] uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00
[ 2.326067] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.328058] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.331059] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.421053] hub 1-0:1.0: state 7 ports 8 chg 0006 evt 0000
[ 2.421065] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 2.472248] ehci_hcd 0000:00:1d.7: port 1 full speed --> companion
[ 2.472253] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT
[ 2.472258] hub 1-0:1.0: port 1 not reset yet, waiting 50ms
[ 2.484350] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.484601] mice: PS/2 mouse device common for all mice
[ 2.485048] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.485211] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 2.485826] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@domain.hid
[ 2.486097] cpuidle: using governor ladder
[ 2.486212] cpuidle: using governor menu
[ 2.486328] No iBFT detected.
[ 2.486839] usbcore: registered new interface driver hiddev
[ 2.487061] usbcore: registered new interface driver usbhid
[ 2.487176] usbhid: v2.6:USB HID core driver
[ 2.487306] Netfilter messages via NETLINK v0.30.
[ 2.487437] nf_conntrack version 0.5.0 (16239 buckets, 64956 max)
[ 2.487873] ctnetlink v0.93: registering with nfnetlink.
[ 2.488822] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.488974] TCP cubic registered
[ 2.489106] Initializing XFRM netlink socket
[ 2.489642] NET: Registered protocol family 10
[ 2.490773] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.490965] IPv6 over IPv4 tunneling driver
[ 2.491926] NET: Registered protocol family 17
[ 2.492315] RPC: Registered udp transport module.
[ 2.492434] RPC: Registered tcp transport module.
[ 2.492573] Using IPI No-Shortcut mode
[ 2.492933] registered taskstats version 1
[ 2.505101] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.523065] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
[ 2.523100] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 2.523110] ehci_hcd 0000:00:1d.7: port 2 low speed --> companion
[ 2.574047] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
[ 2.574076] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.574084] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0004
[ 2.594106] md: Waiting for all devices to be available before autodetect
[ 2.594250] md: If you don't use raid, use raid=noautodetect
[ 2.594556] md: Autodetecting RAID arrays.
[ 2.594676] md: Scanned 0 and added 0 devices.
[ 2.594793] md: autorun ...
[ 2.594905] md: ... autorun DONE.
[ 2.596272] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 2.596425] EXT3-fs: write access will be enabled during recovery.
[ 2.704076] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0006
[ 2.704089] uhci_hcd 0000:00:1d.0: port 1 portsc 0093,00
[ 2.704101] hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[ 2.808038] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[ 2.910054] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 3.032060] usb 2-1: ep0 maxpacket = 8
[ 3.055047] usb 2-1: default language 0x0409
[ 3.066048] usb 2-1: New USB device found, idVendor=0451, idProduct=2077
[ 3.066190] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.066315] usb 2-1: Product: General Purpose USB Hub
[ 3.066533] usb 2-1: uevent
[ 3.066627] usb 2-1: usb_probe_device
[ 3.066631] usb 2-1: configuration #1 chosen from 1 choice
[ 3.072057] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[ 3.074062] usb 2-1:1.0: uevent
[ 3.074158] hub 2-1:1.0: usb_probe_interface
[ 3.074161] hub 2-1:1.0: usb_probe_interface - got id
[ 3.074165] hub 2-1:1.0: USB hub found
[ 3.075059] hub 2-1:1.0: 7 ports detected
[ 3.075199] hub 2-1:1.0: standalone hub
[ 3.075202] hub 2-1:1.0: individual port power switching
[ 3.075205] hub 2-1:1.0: individual port over-current protection
[ 3.075208] hub 2-1:1.0: power on to power good time: 100ms
[ 3.077056] hub 2-1:1.0: local power source is good
[ 3.077061] hub 2-1:1.0: enabling power on all ports
[ 3.084188] drivers/usb/core/inode.c: creating file '002'
[ 3.084296] uhci_hcd 0000:00:1d.0: port 2 portsc 01a3,00
[ 3.084306] hub 2-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[ 3.188056] hub 2-1:1.0: port 3: status 0101 change 0001
[ 3.188075] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[ 3.193058] hub 2-1:1.0: port 7: status 0101 change 0001
[ 3.290064] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 3.294042] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 128, phase 0, 12 us
[ 3.434073] usb 2-2: skipped 1 descriptor after interface
[ 3.439070] usb 2-2: default language 0x0409
[ 3.454092] usb usb3: suspend_rh (auto-stop)
[ 3.454117] usb usb4: suspend_rh (auto-stop)
[ 3.454141] usb usb5: suspend_rh (auto-stop)
[ 3.456072] usb 2-2: New USB device found, idVendor=046d, idProduct=c03e
[ 3.456210] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.456332] usb 2-2: Product: USB-PS/2 Optical Mouse
[ 3.456454] usb 2-2: Manufacturer: Logitech
[ 3.456641] usb 2-2: uevent
[ 3.456700] usb 2-2: usb_probe_device
[ 3.456704] usb 2-2: configuration #1 chosen from 1 choice
[ 3.459074] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
[ 3.459113] usb 2-2:1.0: uevent
[ 3.459204] usbhid 2-2:1.0: usb_probe_interface
[ 3.459207] usbhid 2-2:1.0: usb_probe_interface - got id
[ 3.472429] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input1
[ 3.478242] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 3.478509] drivers/usb/core/inode.c: creating file '003'
[ 3.478603] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 3.478614] hub 2-1:1.0: state 7 ports 7 chg 0088 evt 0000
[ 3.480076] hub 2-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
[ 3.545081] usb 2-1.3: new full speed USB device using uhci_hcd and address 4
[ 3.629035] usb 2-1.3: ep0 maxpacket = 8
[ 3.647089] usb 2-1.3: skipped 1 descriptor after interface
[ 3.652082] usb 2-1.3: default language 0x0409
[ 3.689084] usb 2-1.3: New USB device found, idVendor=04e7, idProduct=0050
[ 3.689224] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.689395] usb 2-1.3: Product: Elo TouchSystems 2216 AccuTouch® USB Touchmonitor Interface
[ 3.689566] usb 2-1.3: Manufacturer: EloTouchSystems,Inc
[ 3.689717] usb 2-1.3: SerialNumber: 50U41798
[ 3.689892] usb 2-1.3: uevent
[ 3.689952] usb 2-1.3: usb_probe_device
[ 3.689956] usb 2-1.3: configuration #1 chosen from 1 choice
[ 3.696086] usb 2-1.3: adding 2-1.3:1.0 (config #1, interface 0)
[ 3.698091] usb 2-1.3:1.0: uevent
[ 3.698187] usbhid 2-1.3:1.0: usb_probe_interface
[ 3.698190] usbhid 2-1.3:1.0: usb_probe_interface - got id
[ 3.704221] input: EloTouchSystems,Inc Elo TouchSystems 2216 AccuTouch® USB Touchmonitor Interface as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input2
[ 3.713249] generic-usb 0003:04E7:0050.0002: input,hidraw1: USB HID v1.00 Pointer [EloTouchSystems,Inc Elo TouchSystems 2216 AccuTouch® USB Touchmonitor Interface] on usb-0000:00:1d.0-1.3/input0
[ 3.713592] drivers/usb/core/inode.c: creating file '004'
[ 3.714089] hub 2-1:1.0: port 7, status 0101, change 0000, 12 Mb/s
[ 3.779095] usb 2-1.7: new full speed USB device using uhci_hcd and address 5
[ 3.864036] usb 2-1.7: ep0 maxpacket = 8
[ 3.897095] usb 2-1.7: default language 0x0409
[ 3.922100] usb 2-1.7: New USB device found, idVendor=0978, idProduct=6800
[ 3.922259] usb 2-1.7: New USB device strings: Mfr=4, Product=64, SerialNumber=0
[ 3.922434] usb 2-1.7: Product: CP6800 USB-CONTROL PANEL
[ 3.922552] usb 2-1.7: Manufacturer: Beckhoff Industrie Elektronik
[ 3.922729] usb 2-1.7: uevent
[ 3.922790] usb 2-1.7: usb_probe_device
[ 3.922793] usb 2-1.7: configuration #1 chosen from 1 choice
[ 3.930099] usb 2-1.7: adding 2-1.7:1.0 (config #1, interface 0)
[ 3.934110] usb 2-1.7:1.0: uevent
[ 3.934377] drivers/usb/core/inode.c: creating file '005'
[ 3.934469] hub 2-1:1.0: state 7 ports 7 chg 0000 evt ff80
[ 4.701464] hub 3-0:1.0: hub_suspend
[ 4.701473] usb usb3: bus auto-suspend
[ 4.701477] usb usb3: suspend_rh
[ 4.701497] hub 4-0:1.0: hub_suspend
[ 4.701503] usb usb4: bus auto-suspend
[ 4.701507] usb usb4: suspend_rh
[ 4.701526] hub 5-0:1.0: hub_suspend
[ 4.701532] usb usb5: bus auto-suspend
[ 4.701536] usb usb5: suspend_rh
[ 4.701560] hub 1-0:1.0: hub_suspend
[ 4.701564] usb usb1: bus auto-suspend
[ 4.701568] ehci_hcd 0000:00:1d.7: suspend root hub
[ 7.829335] kjournald starting. Commit interval 5 seconds
[ 7.829348] EXT3-fs: hdb1: orphan cleanup on readonly fs
[ 7.829372] ext3_orphan_cleanup: deleting unreferenced inode 231467
[ 7.829422] ext3_orphan_cleanup: deleting unreferenced inode 231460
[ 7.829446] EXT3-fs: hdb1: 2 orphan inodes deleted
[ 7.829448] EXT3-fs: recovery complete.
[ 8.107449] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.107621] VFS: Mounted root (ext3 filesystem) readonly on device 3:65.
[ 8.107923] Freeing unused kernel memory: 348k freed
[ 8.108148] Write protecting the kernel text: 3592k
[ 8.108317] Write protecting the kernel read-only data: 1580k
[ 8.111518] khelper used greatest stack depth: 6852 bytes left
[ 8.244737] stty used greatest stack depth: 6372 bytes left
[ 8.299758] cat used greatest stack depth: 6092 bytes left
[ 8.443682] udevd used greatest stack depth: 5920 bytes left
[ 8.499989] usb usb2: uevent
[ 8.500031] usb 2-0:1.0: uevent
[ 8.500088] usb 2-1: uevent
[ 8.500117] usb 2-1.3: uevent
[ 8.500147] usb 2-1.3:1.0: uevent
[ 8.500390] usb 2-1.7: uevent
[ 8.500419] usb 2-1.7:1.0: uevent
[ 8.500529] usb 2-1:1.0: uevent
[ 8.500610] usb 2-2: uevent
[ 8.500640] usb 2-2:1.0: uevent
[ 8.500962] usb usb3: uevent
[ 8.500990] usb 3-0:1.0: uevent
[ 8.501147] usb usb4: uevent
[ 8.501175] usb 4-0:1.0: uevent
[ 8.501316] usb usb5: uevent
[ 8.501344] usb 5-0:1.0: uevent
[ 8.501491] usb usb1: uevent
[ 8.501519] usb 1-0:1.0: uevent
[ 8.551609] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 8.551773] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 8.551982] e1000e 0000:01:00.0: setting latency timer to 64
[ 8.552241] e1000e 0000:01:00.0: irq 26 for MSI/MSI-X
[ 8.594203] e1000e 0000:01:00.0: Warning: detected ASPM enabled in EEPROM
[ 8.642524] 0000:01:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:d0:c9:ae:49:8c
[ 8.642700] 0000:01:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 8.642839] 0000:01:00.0: eth0: MAC: 2, PHY: 2, PBA No: d18336-002
[ 8.643035] e1000e 0000:02:00.0: setting latency timer to 64
[ 8.643256] e1000e 0000:02:00.0: irq 27 for MSI/MSI-X
[ 8.685642] e1000e 0000:02:00.0: Warning: detected ASPM enabled in EEPROM
[ 8.733913] 0000:02:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:d0:c9:ae:49:8d
[ 8.734090] 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 8.734239] 0000:02:00.0: eth1: MAC: 2, PHY: 2, PBA No: d18336-002
[ 11.182765] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 11.189498] EXT3 FS on hdb1, internal journal
[ 13.108810] Adding 1052248k swap on /dev/sda1. Priority:-1 extents:1 across:1052248k
[ 23.758184] EXT3 FS on hdb1, internal journal
[ 23.812210] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 23.812335] Copyright (c) 1999-2006 Intel Corporation.
[ 27.524706] kjournald starting. Commit interval 5 seconds
[ 27.525014] EXT3 FS on sda2, internal journal
[ 27.525256] EXT3-fs: recovery complete.
[ 27.525769] EXT3-fs: mounted filesystem with journal data mode.
[ 28.540045] kjournald starting. Commit interval 5 seconds
[ 28.540360] EXT3 FS on sda3, internal journal
[ 28.540574] EXT3-fs: recovery complete.
[ 28.541210] EXT3-fs: mounted filesystem with journal data mode.
[ 28.615823] kjournald starting. Commit interval 5 seconds
[ 28.617916] EXT3 FS on sda4, internal journal
[ 28.618133] EXT3-fs: recovery complete.
[ 28.618562] EXT3-fs: mounted filesystem with journal data mode.
[ 28.694971] mount used greatest stack depth: 5856 bytes left
[ 29.038644] e1000e 0000:01:00.0: irq 26 for MSI/MSI-X
[ 29.089146] e1000e 0000:01:00.0: irq 26 for MSI/MSI-X
[ 29.090674] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.683554] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 30.683741] 0000:01:00.0: eth0: 10/100 speed: disabling TSO
[ 30.684250] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 31.452514] EXT3 FS on hdb1, internal journal
[ 37.110753] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 37.604131] uhci_hcd 0000:00:1d.0: reserve dev 4 ep81-INT, period 4, phase 2, 17 us
[ 41.515009] eth0: no IPv6 routers present
[ 41.754076] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 8, phase 4, 93 us
[ 41.759418] uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 8, phase 4, 93 us
[ 41.890073] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 8, phase 4, 93 us
^ permalink raw reply [flat|nested] 8+ messages in thread