* [Xenomai-help] Negative Latency results
@ 2009-08-27 11:08 Peter Puchwein
2009-08-27 11:14 ` Gilles Chanteperdrix
0 siblings, 1 reply; 8+ messages in thread
From: Peter Puchwein @ 2009-08-27 11:08 UTC (permalink / raw)
To: xenomai
Hi,
what does a negative latency in the latency-test mean?
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat
worst
RTD| -56.443| -54.519| -33.519| 0| -57.020|
-28.208
Thanks,
Peter
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Xenomai-help] Negative Latency results
2009-08-27 11:08 [Xenomai-help] Negative Latency results Peter Puchwein
@ 2009-08-27 11:14 ` Gilles Chanteperdrix
2009-08-27 11:24 ` Peter Puchwein
0 siblings, 1 reply; 8+ messages in thread
From: Gilles Chanteperdrix @ 2009-08-27 11:14 UTC (permalink / raw)
To: Peter Puchwein; +Cc: xenomai
Peter Puchwein wrote:
> Hi,
>
> what does a negative latency in the latency-test mean?
>
> RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat
> worst
> RTD| -56.443| -54.519| -33.519| 0| -57.020|
> -28.208
It means that the timer handler ticked before the date it was supposed
to tick. This may have several causes:
- /proc/xenomai/latency is too high, adjust it
- hardware things stop the hardware counter used for timing, or slow it
down, such as cpufreq, acpi_processor or even the bios on x86.
--
Gilles
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Xenomai-help] Negative Latency results
2009-08-27 11:14 ` Gilles Chanteperdrix
@ 2009-08-27 11:24 ` Peter Puchwein
2009-08-27 11:27 ` Gilles Chanteperdrix
0 siblings, 1 reply; 8+ messages in thread
From: Peter Puchwein @ 2009-08-27 11:24 UTC (permalink / raw)
To: Gilles Chanteperdrix; +Cc: xenomai
Gilles Chanteperdrix wrote:
> Peter Puchwein wrote:
>> Hi,
>>
>> what does a negative latency in the latency-test mean?
>>
>> RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat
>> worst
>> RTD| -56.443| -54.519| -33.519| 0| -57.020|
>> -28.208
>
Hi Gilles,
> It means that the timer handler ticked before the date it was supposed
> to tick. This may have several causes:
> - /proc/xenomai/latency is too high, adjust it
where can the latency be configured?
> - hardware things stop the hardware counter used for timing, or slow it
> down, such as cpufreq, acpi_processor or even the bios on x86.
we've checked all config settings due to ACPI and they seem to be ok.
We can live with this small negative latency, are there any known
negative effects of the negative latency or can we just leave it.
Thanks again,
Peter
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Xenomai-help] Negative Latency results
2009-08-27 11:24 ` Peter Puchwein
@ 2009-08-27 11:27 ` Gilles Chanteperdrix
2009-08-27 11:50 ` Christoph Permes
0 siblings, 1 reply; 8+ messages in thread
From: Gilles Chanteperdrix @ 2009-08-27 11:27 UTC (permalink / raw)
To: Peter Puchwein; +Cc: xenomai
Peter Puchwein wrote:
> Gilles Chanteperdrix wrote:
>> Peter Puchwein wrote:
>>> Hi,
>>>
>>> what does a negative latency in the latency-test mean?
>>>
>>> RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat
>>> worst
>>> RTD| -56.443| -54.519| -33.519| 0| -57.020|
>>> -28.208
>
> Hi Gilles,
>
>> It means that the timer handler ticked before the date it was supposed
>> to tick. This may have several causes:
>> - /proc/xenomai/latency is too high, adjust it
>
> where can the latency be configured?
in /proc/xenomai/latency
>
>> - hardware things stop the hardware counter used for timing, or slow it
>> down, such as cpufreq, acpi_processor or even the bios on x86.
>
> we've checked all config settings due to ACPI and they seem to be ok.
Please show us your .config and boot logs.
>
> We can live with this small negative latency, are there any known
> negative effects of the negative latency or can we just leave it.
well 50us early is not exactly "small". A typical latency on x86 is
under 20us, so -50 is way off. It is probably the sign that the timing
is broken, so, it should be investigated and resolved IMO.
--
Gilles
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Xenomai-help] Negative Latency results
2009-08-27 11:27 ` Gilles Chanteperdrix
@ 2009-08-27 11:50 ` Christoph Permes
2009-08-27 12:05 ` Gilles Chanteperdrix
0 siblings, 1 reply; 8+ messages in thread
From: Christoph Permes @ 2009-08-27 11:50 UTC (permalink / raw)
To: Gilles Chanteperdrix; +Cc: xenomai
[-- Attachment #1: Type: text/plain, Size: 1559 bytes --]
Hi,
I'm working together with Peter on the latency problem.
I have attached our kernel configuration and the boot log to this mail.
We have tried out configuring a latency between 0 and 10000 but this
didn't help.
Christoph
Am Donnerstag, den 27.08.2009, 13:27 +0200 schrieb Gilles Chanteperdrix:
> Peter Puchwein wrote:
> > Gilles Chanteperdrix wrote:
> >> Peter Puchwein wrote:
> >>> Hi,
> >>>
> >>> what does a negative latency in the latency-test mean?
> >>>
> >>> RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat
> >>> worst
> >>> RTD| -56.443| -54.519| -33.519| 0| -57.020|
> >>> -28.208
> >
> > Hi Gilles,
> >
> >> It means that the timer handler ticked before the date it was supposed
> >> to tick. This may have several causes:
> >> - /proc/xenomai/latency is too high, adjust it
> >
> > where can the latency be configured?
>
> in /proc/xenomai/latency
>
> >
> >> - hardware things stop the hardware counter used for timing, or slow it
> >> down, such as cpufreq, acpi_processor or even the bios on x86.
> >
> > we've checked all config settings due to ACPI and they seem to be ok.
>
> Please show us your .config and boot logs.
>
> >
> > We can live with this small negative latency, are there any known
> > negative effects of the negative latency or can we just leave it.
>
> well 50us early is not exactly "small". A typical latency on x86 is
> under 20us, so -50 is way off. It is probably the sign that the timing
> is broken, so, it should be investigated and resolved IMO.
>
>
[-- Attachment #2: config-2.6.29.5-xenomai-2.4.9 --]
[-- Type: text/plain, Size: 59692 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29.5
# Thu Aug 20 16:18:10 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-xenomai-2.4.9"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Real-time sub-system
#
CONFIG_XENOMAI=y
CONFIG_XENO_GENERIC_STACKPOOL=y
CONFIG_XENO_OPT_NUCLEUS=y
CONFIG_XENO_OPT_PERVASIVE=y
# CONFIG_XENO_OPT_ISHIELD is not set
CONFIG_XENO_OPT_PRIOCPL=y
CONFIG_XENO_OPT_PIPELINE_HEAD=y
CONFIG_XENO_OPT_PIPE=y
CONFIG_XENO_OPT_PIPE_NRDEV=256
CONFIG_XENO_OPT_REGISTRY=y
CONFIG_XENO_OPT_REGISTRY_NRSLOTS=1024
CONFIG_XENO_OPT_SYS_HEAPSZ=1024
CONFIG_XENO_OPT_SYS_STACKPOOLSZ=128
CONFIG_XENO_OPT_STATS=y
CONFIG_XENO_OPT_DEBUG=y
# CONFIG_XENO_OPT_DEBUG_NUCLEUS is not set
# CONFIG_XENO_OPT_DEBUG_QUEUES is not set
# CONFIG_XENO_OPT_DEBUG_REGISTRY is not set
# CONFIG_XENO_OPT_DEBUG_TIMERS is not set
CONFIG_XENO_OPT_WATCHDOG=y
CONFIG_XENO_OPT_WATCHDOG_TIMEOUT=4
# CONFIG_XENO_OPT_SHIRQ is not set
#
# Timing
#
# CONFIG_XENO_OPT_TIMING_PERIODIC is not set
CONFIG_XENO_OPT_TIMING_SCHEDLAT=0
#
# Scalability
#
# CONFIG_XENO_OPT_SCALABLE_SCHED is not set
CONFIG_XENO_OPT_TIMER_LIST=y
# CONFIG_XENO_OPT_TIMER_HEAP is not set
# CONFIG_XENO_OPT_TIMER_WHEEL is not set
#
# Machine
#
CONFIG_XENO_HW_FPU=y
#
# NMI watchdog
#
# CONFIG_XENO_HW_NMI_DEBUG_LATENCY is not set
#
# SMI workaround
#
# CONFIG_XENO_HW_SMI_DETECT_DISABLE is not set
CONFIG_XENO_HW_SMI_DETECT=y
# CONFIG_XENO_HW_SMI_WORKAROUND is not set
#
# Interfaces
#
CONFIG_XENO_SKIN_NATIVE=y
CONFIG_XENO_OPT_NATIVE_PERIOD=0
CONFIG_XENO_OPT_NATIVE_PIPE=y
CONFIG_XENO_OPT_NATIVE_PIPE_BUFSZ=1024
CONFIG_XENO_OPT_NATIVE_REGISTRY=y
CONFIG_XENO_OPT_NATIVE_SEM=y
CONFIG_XENO_OPT_NATIVE_EVENT=y
CONFIG_XENO_OPT_NATIVE_MUTEX=y
CONFIG_XENO_OPT_NATIVE_COND=y
CONFIG_XENO_OPT_NATIVE_QUEUE=y
CONFIG_XENO_OPT_NATIVE_HEAP=y
CONFIG_XENO_OPT_NATIVE_ALARM=y
CONFIG_XENO_OPT_NATIVE_MPS=y
# CONFIG_XENO_OPT_NATIVE_INTR is not set
CONFIG_XENO_OPT_DEBUG_NATIVE=y
CONFIG_XENO_SKIN_POSIX=y
CONFIG_XENO_OPT_POSIX_PERIOD=0
# CONFIG_XENO_OPT_POSIX_SHM is not set
# CONFIG_XENO_OPT_POSIX_INTR is not set
# CONFIG_XENO_OPT_POSIX_SELECT is not set
CONFIG_XENO_OPT_DEBUG_POSIX=y
# CONFIG_XENO_SKIN_PSOS is not set
# CONFIG_XENO_SKIN_UITRON is not set
# CONFIG_XENO_SKIN_VRTX is not set
# CONFIG_XENO_SKIN_VXWORKS is not set
# CONFIG_XENO_SKIN_RTAI is not set
CONFIG_XENO_SKIN_RTDM=y
CONFIG_XENO_OPT_RTDM_PERIOD=0
CONFIG_XENO_OPT_RTDM_FILDES=128
# CONFIG_XENO_OPT_RTDM_SELECT is not set
CONFIG_XENO_OPT_DEBUG_RTDM=y
#
# Drivers
#
#
# Serial drivers
#
# CONFIG_XENO_DRIVERS_16550A is not set
#
# Testing drivers
#
CONFIG_XENO_KLATENCY_MODULE=m
# CONFIG_XENO_DRIVERS_TIMERBENCH is not set
# CONFIG_XENO_DRIVERS_IRQBENCH is not set
# CONFIG_XENO_DRIVERS_SWITCHTEST is not set
#
# CAN drivers
#
# CONFIG_XENO_DRIVERS_CAN is not set
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not set
# CONFIG_X86_RDC321X is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR_32=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=2
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_IPIPE=y
CONFIG_IPIPE_DOMAINS=4
CONFIG_IPIPE_COMPAT=y
CONFIG_IPIPE_DELAYED_ATOMICSW=y
# CONFIG_IPIPE_UNMASKED_CONTEXT_SWITCH is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
# CONFIG_X86_PM_TIMER is not set
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_INGRESS is not set
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_CS5536 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000E=m
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_BNX2=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_GREENASIA_FF is not set
# CONFIG_HID_TOPSEED is not set
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_IPIPE_DEBUG is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_MMIOTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_LGUEST is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: dmesg.txt --]
[-- Type: text/plain; name="dmesg.txt"; charset="UTF-8", Size: 47542 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.29.5-xenomai-2.4.9 (root@domain.hid) (gcc version 4.2.4 (Debian 4.2.4-4)) #1 SMP Thu Aug 20 16:47:49 CEST 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6f0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6f0000 - 000000003f700000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.2 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] last_pfn = 0x3f6f0 max_arch_pfn = 0x100000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] ACPI Error (tbxfroot-0219): A valid RSDP was not found [20081204]
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 00000000 - 377fe000
[ 0.000000] bootmap 00011000 - 00017f00
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00016ea17c] TEXT DATA BSS ==> [0001000000 - 00016ea17c]
[ 0.000000] #4 [00016eb000 - 00016f2000] INIT_PG_TABLE ==> [00016eb000 - 00016f2000]
[ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00f4d10] 000f4d10
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f6f0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f6f0
[ 0.000000] On node 0 totalpages: 259711
[ 0.000000] free_area_init_node: node 0, pgdat c155c500, node_mem_map c16f2200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 254 pages used for memmap
[ 0.000000] HighMem zone: 32244 pages, LIFO batch:7
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] MPTABLE: OEM ID: OEM00000
[ 0.000000] MPTABLE: Product ID: PROD00000000
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f700000:a0900000)
[ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Allocating 40960 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257681
[ 0.000000] Kernel command line: auto BOOT_IMAGE=Linux ro root=341 xeno_nucleus.xenomai_gid=1002
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1499.959 MHz processor.
[ 0.000999] I-pipe 2.4-02: pipeline enabled.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000999] Memory: 1022304k/1039296k available (3590k kernel code, 16200k reserved, 1997k data, 348k init, 129992k highmem)
[ 0.000999] virtual kernel memory layout:
[ 0.000999] fixmap : 0xfff9f000 - 0xfffff000 ( 384 kB)
[ 0.000999] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000999] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000999] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000999] .init : 0xc157c000 - 0xc15d3000 ( 348 kB)
[ 0.000999] .data : 0xc1381be1 - 0xc15751d8 (1997 kB)
[ 0.000999] .text : 0xc1000000 - 0xc1381be1 (3590 kB)
[ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.001009] Calibrating delay loop (skipped), value calculated using timer frequency.. 2999.91 BogoMIPS (lpj=1499959)
[ 0.001273] Security Framework initialized
[ 0.001389] SELinux: Initializing.
[ 0.001513] SELinux: Starting in permissive mode
[ 0.001521] Mount-cache hash table entries: 512
[ 0.001800] Initializing cgroup subsys ns
[ 0.001917] Initializing cgroup subsys cpuacct
[ 0.002020] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.002218] CPU: L2 cache: 4096K
[ 0.002333] CPU: Physical Processor ID: 0
[ 0.002450] CPU: Processor Core ID: 0
[ 0.002602] Checking 'hlt' instruction... OK.
[ 0.006803] ExtINT not setup in hardware but reported by MP table
[ 0.007220] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.017345] CPU0: Intel(R) Core(TM)2 CPU L7400 @ 1.50GHz stepping 06
[ 0.119135] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Calibrating delay using timer specific routine.. 2999.55 BogoMIPS (lpj=1499779)
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 4096K
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.192016] CPU1: Intel(R) Core(TM)2 CPU L7400 @ 1.50GHz stepping 06
[ 0.193170] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.194002] Brought up 2 CPUs
[ 0.194113] Total of 2 processors activated (5999.47 BogoMIPS).
[ 0.195064] khelper used greatest stack depth: 7012 bytes left
[ 0.195218] net_namespace: 996 bytes
[ 0.195404] NET: Registered protocol family 16
[ 0.198173] PCI: PCI BIOS revision 3.00 entry at 0xfb0f0, last bus=3
[ 0.198291] PCI: Using configuration type 1 for base access
[ 0.198446] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.198446] mtrr: probably your BIOS does not setup all CPUs.
[ 0.198446] mtrr: corrected configuration.
[ 0.207021] bio: create slab <bio-0> at 0
[ 0.207158] ACPI: Interpreter disabled.
[ 0.208076] SCSI subsystem initialized
[ 0.208105] libata version 3.00 loaded.
[ 0.208996] usbcore: registered new interface driver usbfs
[ 0.209142] usbcore: registered new interface driver hub
[ 0.209142] usbcore: registered new device driver usb
[ 0.209143] PCI: Probing PCI hardware
[ 0.210014] PCI: Probing PCI hardware (bus 00)
[ 0.210070] pci 0000:00:02.0: reg 10 32bit mmio: [0xfdf00000-0xfdf7ffff]
[ 0.210070] pci 0000:00:02.0: reg 14 io port: [0xef00-0xef07]
[ 0.210070] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.210070] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfdf80000-0xfdfbffff]
[ 0.210125] pci 0000:00:02.1: reg 10 32bit mmio: [0xfde80000-0xfdefffff]
[ 0.210288] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.210417] pci 0000:00:1c.0: PME# disabled
[ 0.210619] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.210761] pci 0000:00:1c.1: PME# disabled
[ 0.211072] pci 0000:00:1d.0: reg 20 io port: [0xee00-0xee1f]
[ 0.211138] pci 0000:00:1d.1: reg 20 io port: [0xed00-0xed1f]
[ 0.211205] pci 0000:00:1d.2: reg 20 io port: [0xec00-0xec1f]
[ 0.211271] pci 0000:00:1d.3: reg 20 io port: [0xeb00-0xeb1f]
[ 0.211322] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]
[ 0.211394] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.211521] pci 0000:00:1d.7: PME# disabled
[ 0.211815] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.211822] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.211972] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.212103] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0290 (mask 0007)
[ 0.212322] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.212331] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.212340] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.212349] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.212358] pci 0000:00:1f.1: reg 20 io port: [0xe800-0xe80f]
[ 0.212407] pci 0000:00:1f.2: reg 10 io port: [0xe700-0xe707]
[ 0.212416] pci 0000:00:1f.2: reg 14 io port: [0xe600-0xe603]
[ 0.212425] pci 0000:00:1f.2: reg 18 io port: [0xe500-0xe507]
[ 0.212434] pci 0000:00:1f.2: reg 1c io port: [0xe400-0xe403]
[ 0.212443] pci 0000:00:1f.2: reg 20 io port: [0xe300-0xe30f]
[ 0.212452] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffc000-0xfdffc3ff]
[ 0.212495] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.212618] pci 0000:00:1f.2: PME# disabled
[ 0.212792] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.213030] pci 0000:01:00.0: reg 10 32bit mmio: [0xfcfe0000-0xfcffffff]
[ 0.213045] pci 0000:01:00.0: reg 14 32bit mmio: [0xfc800000-0xfcbfffff]
[ 0.213060] pci 0000:01:00.0: reg 18 io port: [0xbf00-0xbf1f]
[ 0.213188] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.213315] pci 0000:01:00.0: PME# disabled
[ 0.213502] pci 0000:00:1c.0: bridge io port: [0xb000-0xbfff]
[ 0.213509] pci 0000:00:1c.0: bridge 32bit mmio: [0xfc800000-0xfcffffff]
[ 0.213518] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
[ 0.213578] pci 0000:02:00.0: reg 10 32bit mmio: [0xfd7e0000-0xfd7fffff]
[ 0.213593] pci 0000:02:00.0: reg 14 32bit mmio: [0xfd000000-0xfd3fffff]
[ 0.213608] pci 0000:02:00.0: reg 18 io port: [0xaf00-0xaf1f]
[ 0.213736] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.213861] pci 0000:02:00.0: PME# disabled
[ 0.214041] pci 0000:00:1c.1: bridge io port: [0xa000-0xafff]
[ 0.214047] pci 0000:00:1c.1: bridge 32bit mmio: [0xfd000000-0xfd7fffff]
[ 0.214056] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff]
[ 0.214102] pci 0000:03:08.0: reg 10 32bit mmio: [0xfdaff000-0xfdafffff]
[ 0.214111] pci 0000:03:08.0: reg 14 io port: [0xcf00-0xcf3f]
[ 0.214176] pci 0000:03:08.0: supports D1 D2
[ 0.214179] pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.214306] pci 0000:03:08.0: PME# disabled
[ 0.214463] pci 0000:00:1e.0: transparent bridge
[ 0.214580] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[ 0.214587] pci 0000:00:1e.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
[ 0.214596] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff]
[ 0.216473] pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.216602] pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.216735] pci 0000:00:1c.1: PCI->APIC IRQ transform: INT B -> IRQ 17
[ 0.216972] pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
[ 0.217096] pci 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
[ 0.217225] pci 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18
[ 0.217352] pci 0000:00:1d.3: PCI->APIC IRQ transform: INT D -> IRQ 16
[ 0.217479] pci 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23
[ 0.217624] pci 0000:00:1f.1: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.217744] pci 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19
[ 0.217870] pci 0000:00:1f.3: PCI->APIC IRQ transform: INT B -> IRQ 19
[ 0.217982] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.218107] pci 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
[ 0.218233] pci 0000:03:08.0: PCI->APIC IRQ transform: INT A -> IRQ 20
[ 0.220982] NetLabel: Initializing
[ 0.221117] NetLabel: domain hash size = 128
[ 0.221233] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.221365] NetLabel: unlabeled traffic allowed by default
[ 0.221640] hpet clockevent registered
[ 0.221644] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.221771] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.222159] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.223996] pnp: PnP ACPI: disabled
[ 0.225483] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.225604] pci 0000:00:1c.0: IO window: 0xb000-0xbfff
[ 0.225730] pci 0000:00:1c.0: MEM window: 0xfc800000-0xfcffffff
[ 0.225860] pci 0000:00:1c.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[ 0.226044] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.226171] pci 0000:00:1c.1: IO window: 0xa000-0xafff
[ 0.226296] pci 0000:00:1c.1: MEM window: 0xfd000000-0xfd7fffff
[ 0.226420] pci 0000:00:1c.1: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
[ 0.226596] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.226718] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 0.227823] pci 0000:00:1e.0: MEM window: 0xfda00000-0xfdafffff
[ 0.227948] pci 0000:00:1e.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff
[ 0.228140] pci 0000:00:1c.0: setting latency timer to 64
[ 0.228155] pci 0000:00:1c.1: setting latency timer to 64
[ 0.228165] pci 0000:00:1e.0: setting latency timer to 64
[ 0.228170] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.228174] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.228177] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.228181] pci_bus 0000:01: resource 1 mem: [0xfc800000-0xfcffffff]
[ 0.228184] pci_bus 0000:01: resource 2 mem: [0xfdb00000-0xfdbfffff]
[ 0.228187] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
[ 0.228191] pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
[ 0.228194] pci_bus 0000:02: resource 1 mem: [0xfd000000-0xfd7fffff]
[ 0.228198] pci_bus 0000:02: resource 2 mem: [0xfdc00000-0xfdcfffff]
[ 0.228201] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[ 0.228204] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
[ 0.228207] pci_bus 0000:03: resource 1 mem: [0xfda00000-0xfdafffff]
[ 0.228211] pci_bus 0000:03: resource 2 mem: [0xfdd00000-0xfddfffff]
[ 0.228214] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.228218] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.228255] NET: Registered protocol family 2
[ 0.240541] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.241028] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.241717] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.242090] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.242207] TCP reno registered
[ 0.244632] NET: Registered protocol family 1
[ 0.245221] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.246629] Microcode Update Driver: v2.00 <tigran@domain.hid>, Peter Oruba
[ 0.247136] audit: initializing netlink socket (disabled)
[ 0.247275] type=2000 audit(1251276308.246:1): initialized
[ 0.257216] I-pipe: Domain Xenomai registered.
[ 0.257376] Xenomai: hal/i386 started.
[ 0.275916] Xenomai: real-time nucleus v2.4.9 (Big Bad Moon) loaded.
[ 0.276425] Xenomai: starting native API services.
[ 0.276549] Xenomai: starting POSIX services.
[ 0.276719] Xenomai: starting RTDM services.
[ 0.277052] highmem bounce pool size: 64 pages
[ 0.277187] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.281324] VFS: Disk quotas dquot_6.5.2
[ 0.281564] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.282822] msgmni has been set to 1743
[ 0.283094] SELinux: Registering netfilter hooks
[ 0.283812] alg: No test for stdrng (krng)
[ 0.284081] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.284263] io scheduler noop registered
[ 0.284393] io scheduler anticipatory registered
[ 0.284520] io scheduler deadline registered
[ 0.284647] io scheduler cfq registered (default)
[ 0.284776] pci 0000:00:02.0: Boot video device
[ 0.284790] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10
[ 0.284793] pci 0000:00:1d.0: Performing full reset
[ 0.284813] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.284816] pci 0000:00:1d.1: Performing full reset
[ 0.284834] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.284837] pci 0000:00:1d.2: Performing full reset
[ 0.284855] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.284858] pci 0000:00:1d.3: Performing full reset
[ 0.284925] pci 0000:03:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.285244] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.285323] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.285523] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.285598] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.285877] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.291116] Non-volatile memory driver v1.3
[ 0.291359] intel_rng: FWH not detected
[ 0.291698] Linux agpgart interface v0.103
[ 0.291902] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 0.293732] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 0.297432] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.297727] [drm] Initialized drm 1.1.0 20060810
[ 0.297885] pci 0000:00:02.0: setting latency timer to 64
[ 0.300676] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 0.300858] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.544635] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.723457] Switched to high resolution mode on CPU 1
[ 0.724467] Switched to high resolution mode on CPU 0
[ 0.786490] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.030233] serial8250: ttyS2 at I/O 0x3e8 (irq = 0) is a 16550A
[ 1.274220] serial8250: ttyS3 at I/O 0x2e8 (irq = 0) is a 16550A
[ 1.276975] brd: module loaded
[ 1.278234] loop: module loaded
[ 1.278426] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 1.278548] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.302863] e100: 0000:03:08.0: e100_eeprom_load: EEPROM corrupted
[ 1.302997] e100: probe of 0000:03:08.0 failed with error -11
[ 1.303296] sky2 driver version 1.22
[ 1.303664] console [netcon0] enabled
[ 1.303793] netconsole: network logging started
[ 1.303904] Uniform Multi-Platform E-IDE driver
[ 1.304220] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
[ 1.304378] piix 0000:00:1f.1: IDE port disabled
[ 1.304514] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 1.304655] ide0: BM-DMA at 0xe800-0xe807
[ 1.304789] Probing IDE interface ide0...
[ 1.772285] hdb: SanDisk SDCFX4-4096, CFA DISK drive
[ 1.823169] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO2
[ 1.823187] hdb: host side 80-wire cable detection failed, limiting max speed to UDMA33
[ 1.823369] hdb: UDMA/33 mode selected
[ 1.823569] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1.823941] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 1.824180] ide-gd driver 1.18
[ 1.824325] hdb: max request size: 128KiB
[ 1.824464] hdb: 8027712 sectors (4110 MB) w/1KiB Cache, CHS=7964/16/63
[ 1.824777] hdb: hdb1
[ 1.834016] Loading iSCSI transport class v2.0-870.
[ 1.834510] Driver 'sd' needs updating - please use bus_type methods
[ 1.834687] Driver 'sr' needs updating - please use bus_type methods
[ 1.835040] ata_piix 0000:00:1f.2: version 2.12
[ 1.835057] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 1.835551] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.835616] scsi0 : ata_piix
[ 1.835927] scsi1 : ata_piix
[ 1.836179] ata1: SATA max UDMA/133 cmd 0xe700 ctl 0xe600 bmdma 0xe300 irq 19
[ 1.836308] ata2: SATA max UDMA/133 cmd 0xe500 ctl 0xe400 bmdma 0xe308 irq 19
[ 1.990418] ata1.00: ATA-7: ST940817SM, 3.AAB, max UDMA/133
[ 1.990552] ata1.00: 78140160 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.996442] ata1.00: configured for UDMA/133
[ 1.996688] scsi 0:0:0:0: Direct-Access ATA ST940817SM 3.AA PQ: 0 ANSI: 5
[ 1.997160] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 1.997342] sd 0:0:0:0: [sda] Write Protect is off
[ 1.997462] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.997502] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.997784] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors: (40.0 GB/37.2 GiB)
[ 1.997988] sd 0:0:0:0: [sda] Write Protect is off
[ 1.998126] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.998168] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.998341] sda: sda1 sda2 sda3 sda4
[ 2.043296] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.043582] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.205704] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.205830] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
[ 2.205874] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.205880] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.206101] drivers/usb/core/inode.c: creating file 'devices'
[ 2.206107] drivers/usb/core/inode.c: creating file '001'
[ 2.206197] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.206390] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[ 2.206395] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 2.206417] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 2.210313] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.210317] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 2.210329] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 2.210452] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 2.214331] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 2.220060] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.220244] usb usb1: default language 0x0409
[ 2.220256] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.220384] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.220550] usb usb1: Product: EHCI Host Controller
[ 2.220671] usb usb1: Manufacturer: Linux 2.6.29.5-xenomai-2.4.9 ehci_hcd
[ 2.220794] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.220966] usb usb1: uevent
[ 2.221037] usb usb1: usb_probe_device
[ 2.221041] usb usb1: configuration #1 chosen from 1 choice
[ 2.221166] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 2.221191] usb 1-0:1.0: uevent
[ 2.221250] hub 1-0:1.0: usb_probe_interface
[ 2.221254] hub 1-0:1.0: usb_probe_interface - got id
[ 2.221257] hub 1-0:1.0: USB hub found
[ 2.221380] hub 1-0:1.0: 8 ports detected
[ 2.221493] hub 1-0:1.0: standalone hub
[ 2.221496] hub 1-0:1.0: no power switching (usb 1.0)
[ 2.221499] hub 1-0:1.0: individual port over-current protection
[ 2.221502] hub 1-0:1.0: power on to power good time: 20ms
[ 2.221509] hub 1-0:1.0: local power source is good
[ 2.221513] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 2.221699] drivers/usb/core/inode.c: creating file '001'
[ 2.221849] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.221970] ohci_hcd: block sizes: ed 64 td 64
[ 2.222038] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.222199] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.222203] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.222399] drivers/usb/core/inode.c: creating file '002'
[ 2.222487] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.222662] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 2.222801] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.222804] uhci_hcd 0000:00:1d.0: Performing full reset
[ 2.222824] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ee00
[ 2.222984] usb usb2: default language 0x0409
[ 2.222996] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.223132] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.223305] usb usb2: Product: UHCI Host Controller
[ 2.223427] usb usb2: Manufacturer: Linux 2.6.29.5-xenomai-2.4.9 uhci_hcd
[ 2.223550] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.223733] usb usb2: uevent
[ 2.223791] usb usb2: usb_probe_device
[ 2.223794] usb usb2: configuration #1 chosen from 1 choice
[ 2.223918] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 2.223938] usb 2-0:1.0: uevent
[ 2.223996] hub 2-0:1.0: usb_probe_interface
[ 2.224001] hub 2-0:1.0: usb_probe_interface - got id
[ 2.224012] hub 2-0:1.0: USB hub found
[ 2.224155] hub 2-0:1.0: 2 ports detected
[ 2.224273] hub 2-0:1.0: standalone hub
[ 2.224275] hub 2-0:1.0: no power switching (usb 1.0)
[ 2.224278] hub 2-0:1.0: individual port over-current protection
[ 2.224281] hub 2-0:1.0: power on to power good time: 2ms
[ 2.224288] hub 2-0:1.0: local power source is good
[ 2.224291] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 2.224385] drivers/usb/core/inode.c: creating file '001'
[ 2.224502] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.224507] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.224698] drivers/usb/core/inode.c: creating file '003'
[ 2.224792] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.224961] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 2.225109] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.225112] uhci_hcd 0000:00:1d.1: Performing full reset
[ 2.225132] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ed00
[ 2.225336] usb usb3: default language 0x0409
[ 2.225348] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.225473] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.225645] usb usb3: Product: UHCI Host Controller
[ 2.225777] usb usb3: Manufacturer: Linux 2.6.29.5-xenomai-2.4.9 uhci_hcd
[ 2.225897] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.226108] usb usb3: uevent
[ 2.226167] usb usb3: usb_probe_device
[ 2.226170] usb usb3: configuration #1 chosen from 1 choice
[ 2.226297] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 2.226318] usb 3-0:1.0: uevent
[ 2.226376] hub 3-0:1.0: usb_probe_interface
[ 2.226378] hub 3-0:1.0: usb_probe_interface - got id
[ 2.226382] hub 3-0:1.0: USB hub found
[ 2.226506] hub 3-0:1.0: 2 ports detected
[ 2.226628] hub 3-0:1.0: standalone hub
[ 2.226631] hub 3-0:1.0: no power switching (usb 1.0)
[ 2.226634] hub 3-0:1.0: individual port over-current protection
[ 2.226637] hub 3-0:1.0: power on to power good time: 2ms
[ 2.226644] hub 3-0:1.0: local power source is good
[ 2.226647] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 2.226743] drivers/usb/core/inode.c: creating file '001'
[ 2.226857] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.226862] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.227056] drivers/usb/core/inode.c: creating file '004'
[ 2.227143] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.227315] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 2.227434] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.227437] uhci_hcd 0000:00:1d.2: Performing full reset
[ 2.227462] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00
[ 2.227624] usb usb4: default language 0x0409
[ 2.227635] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.227774] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.227947] usb usb4: Product: UHCI Host Controller
[ 2.228095] usb usb4: Manufacturer: Linux 2.6.29.5-xenomai-2.4.9 uhci_hcd
[ 2.228221] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.228399] usb usb4: uevent
[ 2.228457] usb usb4: usb_probe_device
[ 2.228461] usb usb4: configuration #1 chosen from 1 choice
[ 2.228587] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 2.228607] usb 4-0:1.0: uevent
[ 2.228665] hub 4-0:1.0: usb_probe_interface
[ 2.228667] hub 4-0:1.0: usb_probe_interface - got id
[ 2.228670] hub 4-0:1.0: USB hub found
[ 2.228789] hub 4-0:1.0: 2 ports detected
[ 2.228920] hub 4-0:1.0: standalone hub
[ 2.228922] hub 4-0:1.0: no power switching (usb 1.0)
[ 2.228925] hub 4-0:1.0: individual port over-current protection
[ 2.228928] hub 4-0:1.0: power on to power good time: 2ms
[ 2.228935] hub 4-0:1.0: local power source is good
[ 2.228938] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 2.229032] drivers/usb/core/inode.c: creating file '001'
[ 2.229151] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.229156] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.229373] drivers/usb/core/inode.c: creating file '005'
[ 2.229464] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.229635] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 2.229752] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.229755] uhci_hcd 0000:00:1d.3: Performing full reset
[ 2.229779] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000eb00
[ 2.229936] usb usb5: default language 0x0409
[ 2.229948] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.230111] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.230293] usb usb5: Product: UHCI Host Controller
[ 2.230412] usb usb5: Manufacturer: Linux 2.6.29.5-xenomai-2.4.9 uhci_hcd
[ 2.230535] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.230712] usb usb5: uevent
[ 2.230770] usb usb5: usb_probe_device
[ 2.230773] usb usb5: configuration #1 chosen from 1 choice
[ 2.230895] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 2.230915] usb 5-0:1.0: uevent
[ 2.230975] hub 5-0:1.0: usb_probe_interface
[ 2.230978] hub 5-0:1.0: usb_probe_interface - got id
[ 2.230981] hub 5-0:1.0: USB hub found
[ 2.231111] hub 5-0:1.0: 2 ports detected
[ 2.231228] hub 5-0:1.0: standalone hub
[ 2.231230] hub 5-0:1.0: no power switching (usb 1.0)
[ 2.231233] hub 5-0:1.0: individual port over-current protection
[ 2.231236] hub 5-0:1.0: power on to power good time: 2ms
[ 2.231243] hub 5-0:1.0: local power source is good
[ 2.231246] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 2.231342] drivers/usb/core/inode.c: creating file '001'
[ 2.231566] usbcore: registered new interface driver usblp
[ 2.231715] Initializing USB Mass Storage driver...
[ 2.231915] usbcore: registered new interface driver usb-storage
[ 2.232045] USB Mass Storage support registered.
[ 2.232240] usbcore: registered new interface driver libusual
[ 2.233505] PNP: No PS/2 controller found. Probing ports directly.
[ 2.321027] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
[ 2.321036] hub 1-0:1.0: port 1: status 0501 change 0001
[ 2.321051] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT
[ 2.321058] hub 1-0:1.0: port 2: status 0501 change 0001
[ 2.324044] uhci_hcd 0000:00:1d.0: port 1 portsc 008a,00
[ 2.324064] uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00
[ 2.326067] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.328058] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.331059] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.421053] hub 1-0:1.0: state 7 ports 8 chg 0006 evt 0000
[ 2.421065] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 2.472248] ehci_hcd 0000:00:1d.7: port 1 full speed --> companion
[ 2.472253] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT
[ 2.472258] hub 1-0:1.0: port 1 not reset yet, waiting 50ms
[ 2.484350] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.484601] mice: PS/2 mouse device common for all mice
[ 2.485048] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.485211] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 2.485826] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@domain.hid
[ 2.486097] cpuidle: using governor ladder
[ 2.486212] cpuidle: using governor menu
[ 2.486328] No iBFT detected.
[ 2.486839] usbcore: registered new interface driver hiddev
[ 2.487061] usbcore: registered new interface driver usbhid
[ 2.487176] usbhid: v2.6:USB HID core driver
[ 2.487306] Netfilter messages via NETLINK v0.30.
[ 2.487437] nf_conntrack version 0.5.0 (16239 buckets, 64956 max)
[ 2.487873] ctnetlink v0.93: registering with nfnetlink.
[ 2.488822] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.488974] TCP cubic registered
[ 2.489106] Initializing XFRM netlink socket
[ 2.489642] NET: Registered protocol family 10
[ 2.490773] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.490965] IPv6 over IPv4 tunneling driver
[ 2.491926] NET: Registered protocol family 17
[ 2.492315] RPC: Registered udp transport module.
[ 2.492434] RPC: Registered tcp transport module.
[ 2.492573] Using IPI No-Shortcut mode
[ 2.492933] registered taskstats version 1
[ 2.505101] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.523065] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
[ 2.523100] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 2.523110] ehci_hcd 0000:00:1d.7: port 2 low speed --> companion
[ 2.574047] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
[ 2.574076] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.574084] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0004
[ 2.594106] md: Waiting for all devices to be available before autodetect
[ 2.594250] md: If you don't use raid, use raid=noautodetect
[ 2.594556] md: Autodetecting RAID arrays.
[ 2.594676] md: Scanned 0 and added 0 devices.
[ 2.594793] md: autorun ...
[ 2.594905] md: ... autorun DONE.
[ 2.596272] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 2.596425] EXT3-fs: write access will be enabled during recovery.
[ 2.704076] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0006
[ 2.704089] uhci_hcd 0000:00:1d.0: port 1 portsc 0093,00
[ 2.704101] hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[ 2.808038] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[ 2.910054] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 3.032060] usb 2-1: ep0 maxpacket = 8
[ 3.055047] usb 2-1: default language 0x0409
[ 3.066048] usb 2-1: New USB device found, idVendor=0451, idProduct=2077
[ 3.066190] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.066315] usb 2-1: Product: General Purpose USB Hub
[ 3.066533] usb 2-1: uevent
[ 3.066627] usb 2-1: usb_probe_device
[ 3.066631] usb 2-1: configuration #1 chosen from 1 choice
[ 3.072057] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[ 3.074062] usb 2-1:1.0: uevent
[ 3.074158] hub 2-1:1.0: usb_probe_interface
[ 3.074161] hub 2-1:1.0: usb_probe_interface - got id
[ 3.074165] hub 2-1:1.0: USB hub found
[ 3.075059] hub 2-1:1.0: 7 ports detected
[ 3.075199] hub 2-1:1.0: standalone hub
[ 3.075202] hub 2-1:1.0: individual port power switching
[ 3.075205] hub 2-1:1.0: individual port over-current protection
[ 3.075208] hub 2-1:1.0: power on to power good time: 100ms
[ 3.077056] hub 2-1:1.0: local power source is good
[ 3.077061] hub 2-1:1.0: enabling power on all ports
[ 3.084188] drivers/usb/core/inode.c: creating file '002'
[ 3.084296] uhci_hcd 0000:00:1d.0: port 2 portsc 01a3,00
[ 3.084306] hub 2-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[ 3.188056] hub 2-1:1.0: port 3: status 0101 change 0001
[ 3.188075] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[ 3.193058] hub 2-1:1.0: port 7: status 0101 change 0001
[ 3.290064] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 3.294042] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 128, phase 0, 12 us
[ 3.434073] usb 2-2: skipped 1 descriptor after interface
[ 3.439070] usb 2-2: default language 0x0409
[ 3.454092] usb usb3: suspend_rh (auto-stop)
[ 3.454117] usb usb4: suspend_rh (auto-stop)
[ 3.454141] usb usb5: suspend_rh (auto-stop)
[ 3.456072] usb 2-2: New USB device found, idVendor=046d, idProduct=c03e
[ 3.456210] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.456332] usb 2-2: Product: USB-PS/2 Optical Mouse
[ 3.456454] usb 2-2: Manufacturer: Logitech
[ 3.456641] usb 2-2: uevent
[ 3.456700] usb 2-2: usb_probe_device
[ 3.456704] usb 2-2: configuration #1 chosen from 1 choice
[ 3.459074] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
[ 3.459113] usb 2-2:1.0: uevent
[ 3.459204] usbhid 2-2:1.0: usb_probe_interface
[ 3.459207] usbhid 2-2:1.0: usb_probe_interface - got id
[ 3.472429] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input1
[ 3.478242] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 3.478509] drivers/usb/core/inode.c: creating file '003'
[ 3.478603] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 3.478614] hub 2-1:1.0: state 7 ports 7 chg 0088 evt 0000
[ 3.480076] hub 2-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
[ 3.545081] usb 2-1.3: new full speed USB device using uhci_hcd and address 4
[ 3.629035] usb 2-1.3: ep0 maxpacket = 8
[ 3.647089] usb 2-1.3: skipped 1 descriptor after interface
[ 3.652082] usb 2-1.3: default language 0x0409
[ 3.689084] usb 2-1.3: New USB device found, idVendor=04e7, idProduct=0050
[ 3.689224] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.689395] usb 2-1.3: Product: Elo TouchSystems 2216 AccuTouch® USB Touchmonitor Interface
[ 3.689566] usb 2-1.3: Manufacturer: EloTouchSystems,Inc
[ 3.689717] usb 2-1.3: SerialNumber: 50U41798
[ 3.689892] usb 2-1.3: uevent
[ 3.689952] usb 2-1.3: usb_probe_device
[ 3.689956] usb 2-1.3: configuration #1 chosen from 1 choice
[ 3.696086] usb 2-1.3: adding 2-1.3:1.0 (config #1, interface 0)
[ 3.698091] usb 2-1.3:1.0: uevent
[ 3.698187] usbhid 2-1.3:1.0: usb_probe_interface
[ 3.698190] usbhid 2-1.3:1.0: usb_probe_interface - got id
[ 3.704221] input: EloTouchSystems,Inc Elo TouchSystems 2216 AccuTouch® USB Touchmonitor Interface as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input2
[ 3.713249] generic-usb 0003:04E7:0050.0002: input,hidraw1: USB HID v1.00 Pointer [EloTouchSystems,Inc Elo TouchSystems 2216 AccuTouch® USB Touchmonitor Interface] on usb-0000:00:1d.0-1.3/input0
[ 3.713592] drivers/usb/core/inode.c: creating file '004'
[ 3.714089] hub 2-1:1.0: port 7, status 0101, change 0000, 12 Mb/s
[ 3.779095] usb 2-1.7: new full speed USB device using uhci_hcd and address 5
[ 3.864036] usb 2-1.7: ep0 maxpacket = 8
[ 3.897095] usb 2-1.7: default language 0x0409
[ 3.922100] usb 2-1.7: New USB device found, idVendor=0978, idProduct=6800
[ 3.922259] usb 2-1.7: New USB device strings: Mfr=4, Product=64, SerialNumber=0
[ 3.922434] usb 2-1.7: Product: CP6800 USB-CONTROL PANEL
[ 3.922552] usb 2-1.7: Manufacturer: Beckhoff Industrie Elektronik
[ 3.922729] usb 2-1.7: uevent
[ 3.922790] usb 2-1.7: usb_probe_device
[ 3.922793] usb 2-1.7: configuration #1 chosen from 1 choice
[ 3.930099] usb 2-1.7: adding 2-1.7:1.0 (config #1, interface 0)
[ 3.934110] usb 2-1.7:1.0: uevent
[ 3.934377] drivers/usb/core/inode.c: creating file '005'
[ 3.934469] hub 2-1:1.0: state 7 ports 7 chg 0000 evt ff80
[ 4.701464] hub 3-0:1.0: hub_suspend
[ 4.701473] usb usb3: bus auto-suspend
[ 4.701477] usb usb3: suspend_rh
[ 4.701497] hub 4-0:1.0: hub_suspend
[ 4.701503] usb usb4: bus auto-suspend
[ 4.701507] usb usb4: suspend_rh
[ 4.701526] hub 5-0:1.0: hub_suspend
[ 4.701532] usb usb5: bus auto-suspend
[ 4.701536] usb usb5: suspend_rh
[ 4.701560] hub 1-0:1.0: hub_suspend
[ 4.701564] usb usb1: bus auto-suspend
[ 4.701568] ehci_hcd 0000:00:1d.7: suspend root hub
[ 7.829335] kjournald starting. Commit interval 5 seconds
[ 7.829348] EXT3-fs: hdb1: orphan cleanup on readonly fs
[ 7.829372] ext3_orphan_cleanup: deleting unreferenced inode 231467
[ 7.829422] ext3_orphan_cleanup: deleting unreferenced inode 231460
[ 7.829446] EXT3-fs: hdb1: 2 orphan inodes deleted
[ 7.829448] EXT3-fs: recovery complete.
[ 8.107449] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.107621] VFS: Mounted root (ext3 filesystem) readonly on device 3:65.
[ 8.107923] Freeing unused kernel memory: 348k freed
[ 8.108148] Write protecting the kernel text: 3592k
[ 8.108317] Write protecting the kernel read-only data: 1580k
[ 8.111518] khelper used greatest stack depth: 6852 bytes left
[ 8.244737] stty used greatest stack depth: 6372 bytes left
[ 8.299758] cat used greatest stack depth: 6092 bytes left
[ 8.443682] udevd used greatest stack depth: 5920 bytes left
[ 8.499989] usb usb2: uevent
[ 8.500031] usb 2-0:1.0: uevent
[ 8.500088] usb 2-1: uevent
[ 8.500117] usb 2-1.3: uevent
[ 8.500147] usb 2-1.3:1.0: uevent
[ 8.500390] usb 2-1.7: uevent
[ 8.500419] usb 2-1.7:1.0: uevent
[ 8.500529] usb 2-1:1.0: uevent
[ 8.500610] usb 2-2: uevent
[ 8.500640] usb 2-2:1.0: uevent
[ 8.500962] usb usb3: uevent
[ 8.500990] usb 3-0:1.0: uevent
[ 8.501147] usb usb4: uevent
[ 8.501175] usb 4-0:1.0: uevent
[ 8.501316] usb usb5: uevent
[ 8.501344] usb 5-0:1.0: uevent
[ 8.501491] usb usb1: uevent
[ 8.501519] usb 1-0:1.0: uevent
[ 8.551609] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 8.551773] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 8.551982] e1000e 0000:01:00.0: setting latency timer to 64
[ 8.552241] e1000e 0000:01:00.0: irq 26 for MSI/MSI-X
[ 8.594203] e1000e 0000:01:00.0: Warning: detected ASPM enabled in EEPROM
[ 8.642524] 0000:01:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:d0:c9:ae:49:8c
[ 8.642700] 0000:01:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 8.642839] 0000:01:00.0: eth0: MAC: 2, PHY: 2, PBA No: d18336-002
[ 8.643035] e1000e 0000:02:00.0: setting latency timer to 64
[ 8.643256] e1000e 0000:02:00.0: irq 27 for MSI/MSI-X
[ 8.685642] e1000e 0000:02:00.0: Warning: detected ASPM enabled in EEPROM
[ 8.733913] 0000:02:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:d0:c9:ae:49:8d
[ 8.734090] 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 8.734239] 0000:02:00.0: eth1: MAC: 2, PHY: 2, PBA No: d18336-002
[ 11.182765] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 11.189498] EXT3 FS on hdb1, internal journal
[ 13.108810] Adding 1052248k swap on /dev/sda1. Priority:-1 extents:1 across:1052248k
[ 23.758184] EXT3 FS on hdb1, internal journal
[ 23.812210] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 23.812335] Copyright (c) 1999-2006 Intel Corporation.
[ 27.524706] kjournald starting. Commit interval 5 seconds
[ 27.525014] EXT3 FS on sda2, internal journal
[ 27.525256] EXT3-fs: recovery complete.
[ 27.525769] EXT3-fs: mounted filesystem with journal data mode.
[ 28.540045] kjournald starting. Commit interval 5 seconds
[ 28.540360] EXT3 FS on sda3, internal journal
[ 28.540574] EXT3-fs: recovery complete.
[ 28.541210] EXT3-fs: mounted filesystem with journal data mode.
[ 28.615823] kjournald starting. Commit interval 5 seconds
[ 28.617916] EXT3 FS on sda4, internal journal
[ 28.618133] EXT3-fs: recovery complete.
[ 28.618562] EXT3-fs: mounted filesystem with journal data mode.
[ 28.694971] mount used greatest stack depth: 5856 bytes left
[ 29.038644] e1000e 0000:01:00.0: irq 26 for MSI/MSI-X
[ 29.089146] e1000e 0000:01:00.0: irq 26 for MSI/MSI-X
[ 29.090674] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.683554] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 30.683741] 0000:01:00.0: eth0: 10/100 speed: disabling TSO
[ 30.684250] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 31.452514] EXT3 FS on hdb1, internal journal
[ 37.110753] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 37.604131] uhci_hcd 0000:00:1d.0: reserve dev 4 ep81-INT, period 4, phase 2, 17 us
[ 41.515009] eth0: no IPv6 routers present
[ 41.754076] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 8, phase 4, 93 us
[ 41.759418] uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 8, phase 4, 93 us
[ 41.890073] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 8, phase 4, 93 us
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Xenomai-help] Negative Latency results
2009-08-27 11:50 ` Christoph Permes
@ 2009-08-27 12:05 ` Gilles Chanteperdrix
2009-08-27 12:33 ` Christoph Permes
0 siblings, 1 reply; 8+ messages in thread
From: Gilles Chanteperdrix @ 2009-08-27 12:05 UTC (permalink / raw)
To: Christoph Permes; +Cc: xenomai
Christoph Permes wrote:
> Hi,
>
> I'm working together with Peter on the latency problem.
>
> I have attached our kernel configuration and the boot log to this mail.
>
> We have tried out configuring a latency between 0 and 10000 but this
> didn't help.
Ok. Could you try the following patch:
diff --git a/include/asm-generic/bits/timeconv.h
b/include/asm-generic/bits/timeconv.h
index 9a89fe9..654f17f 100644
--- a/include/asm-generic/bits/timeconv.h
+++ b/include/asm-generic/bits/timeconv.h
@@ -37,6 +37,11 @@ long long xnarch_tsc_to_ns_rounded(long long ticks)
unsigned int shift = tsc_shift - 1;
return (xnarch_llmulshft(ticks, tsc_scale, shift) + 1) / 2;
}
+
+long long xnarch_ns_to_tsc(long long ns)
+{
+ return xnarch_llimd(ns, 1 << tsc_shift, tsc_scale);
+}
#else /* !XNARCH_HAVE_LLMULSHFT */
long long xnarch_tsc_to_ns(long long ticks)
{
@@ -46,12 +51,12 @@ long long xnarch_tsc_to_ns_rounded(long long ticks)
{
return (xnarch_llimd(ticks, 1000000000, cpufreq/2) + 1) / 2;
}
-#endif /* !XNARCH_HAVE_LLMULSHFT */
long long xnarch_ns_to_tsc(long long ns)
{
return xnarch_llimd(ns, cpufreq, 1000000000);
}
+#endif /* !XNARCH_HAVE_LLMULSHFT */
static inline void xnarch_init_timeconv(unsigned long long freq)
{
--
Gilles
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [Xenomai-help] Negative Latency results
2009-08-27 12:05 ` Gilles Chanteperdrix
@ 2009-08-27 12:33 ` Christoph Permes
2009-08-27 17:13 ` Gilles Chanteperdrix
0 siblings, 1 reply; 8+ messages in thread
From: Christoph Permes @ 2009-08-27 12:33 UTC (permalink / raw)
To: Gilles Chanteperdrix; +Cc: xenomai
Am Donnerstag, den 27.08.2009, 14:05 +0200 schrieb Gilles Chanteperdrix:
> Christoph Permes wrote:
> > Hi,
> >
> > I'm working together with Peter on the latency problem.
> >
> > I have attached our kernel configuration and the boot log to this mail.
> >
> > We have tried out configuring a latency between 0 and 10000 but this
> > didn't help.
>
> Ok. Could you try the following patch:
>
> diff --git a/include/asm-generic/bits/timeconv.h
> b/include/asm-generic/bits/timeconv.h
> index 9a89fe9..654f17f 100644
> --- a/include/asm-generic/bits/timeconv.h
> +++ b/include/asm-generic/bits/timeconv.h
> @@ -37,6 +37,11 @@ long long xnarch_tsc_to_ns_rounded(long long ticks)
> unsigned int shift = tsc_shift - 1;
> return (xnarch_llmulshft(ticks, tsc_scale, shift) + 1) / 2;
> }
> +
> +long long xnarch_ns_to_tsc(long long ns)
> +{
> + return xnarch_llimd(ns, 1 << tsc_shift, tsc_scale);
> +}
> #else /* !XNARCH_HAVE_LLMULSHFT */
> long long xnarch_tsc_to_ns(long long ticks)
> {
> @@ -46,12 +51,12 @@ long long xnarch_tsc_to_ns_rounded(long long ticks)
> {
> return (xnarch_llimd(ticks, 1000000000, cpufreq/2) + 1) / 2;
> }
> -#endif /* !XNARCH_HAVE_LLMULSHFT */
>
> long long xnarch_ns_to_tsc(long long ns)
> {
> return xnarch_llimd(ns, cpufreq, 1000000000);
> }
> +#endif /* !XNARCH_HAVE_LLMULSHFT */
>
> static inline void xnarch_init_timeconv(unsigned long long freq)
> {
>
Now the latency is positive:
RTT| 00:01:46 (periodic user-mode task, 100 us period, priority 99)
RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
RTD| 2.021| 9.626| 28.016| 0| 1.564| 29.206
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Xenomai-help] Negative Latency results
2009-08-27 12:33 ` Christoph Permes
@ 2009-08-27 17:13 ` Gilles Chanteperdrix
0 siblings, 0 replies; 8+ messages in thread
From: Gilles Chanteperdrix @ 2009-08-27 17:13 UTC (permalink / raw)
To: Christoph Permes; +Cc: xenomai
Christoph Permes wrote:
> Am Donnerstag, den 27.08.2009, 14:05 +0200 schrieb Gilles Chanteperdrix:
>> Christoph Permes wrote:
>>> Hi,
>>>
>>> I'm working together with Peter on the latency problem.
>>>
>>> I have attached our kernel configuration and the boot log to this mail.
>>>
>>> We have tried out configuring a latency between 0 and 10000 but this
>>> didn't help.
>> Ok. Could you try the following patch:
>>
>> diff --git a/include/asm-generic/bits/timeconv.h
>> b/include/asm-generic/bits/timeconv.h
>> index 9a89fe9..654f17f 100644
>> --- a/include/asm-generic/bits/timeconv.h
>> +++ b/include/asm-generic/bits/timeconv.h
>> @@ -37,6 +37,11 @@ long long xnarch_tsc_to_ns_rounded(long long ticks)
>> unsigned int shift = tsc_shift - 1;
>> return (xnarch_llmulshft(ticks, tsc_scale, shift) + 1) / 2;
>> }
>> +
>> +long long xnarch_ns_to_tsc(long long ns)
>> +{
>> + return xnarch_llimd(ns, 1 << tsc_shift, tsc_scale);
>> +}
>> #else /* !XNARCH_HAVE_LLMULSHFT */
>> long long xnarch_tsc_to_ns(long long ticks)
>> {
>> @@ -46,12 +51,12 @@ long long xnarch_tsc_to_ns_rounded(long long ticks)
>> {
>> return (xnarch_llimd(ticks, 1000000000, cpufreq/2) + 1) / 2;
>> }
>> -#endif /* !XNARCH_HAVE_LLMULSHFT */
>>
>> long long xnarch_ns_to_tsc(long long ns)
>> {
>> return xnarch_llimd(ns, cpufreq, 1000000000);
>> }
>> +#endif /* !XNARCH_HAVE_LLMULSHFT */
>>
>> static inline void xnarch_init_timeconv(unsigned long long freq)
>> {
>>
>
> Now the latency is positive:
>
> RTT| 00:01:46 (periodic user-mode task, 100 us period, priority 99)
> RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst
> RTD| 2.021| 9.626| 28.016| 0| 1.564| 29.206
Much better.
--
Gilles.
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2009-08-27 17:13 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-08-27 11:08 [Xenomai-help] Negative Latency results Peter Puchwein
2009-08-27 11:14 ` Gilles Chanteperdrix
2009-08-27 11:24 ` Peter Puchwein
2009-08-27 11:27 ` Gilles Chanteperdrix
2009-08-27 11:50 ` Christoph Permes
2009-08-27 12:05 ` Gilles Chanteperdrix
2009-08-27 12:33 ` Christoph Permes
2009-08-27 17:13 ` Gilles Chanteperdrix
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.