* [Xenomai-help] Freeze on SMP x86-64
@ 2009-10-02 11:48 Roman Pisl
2009-10-02 12:39 ` Gilles Chanteperdrix
` (3 more replies)
0 siblings, 4 replies; 19+ messages in thread
From: Roman Pisl @ 2009-10-02 11:48 UTC (permalink / raw)
To: xenomai
[-- Attachment #1: Type: text/plain, Size: 486 bytes --]
Hello,
I just tried x86-64 SMP Linux/Xenomai on my workstation (Intel Core2
Quad) but it freezes immediately after latency test or clocktest is
started. It freezes even during the boot, when Xenomai debbuging is
enabled.
The same kernel binary runs seamlessly in KVM on the same machine.
When I completely disable ACPI, the kernel recognizes only one CPU and
the latency test works.
The same configuration but for 32bit x86 also runs without freeze.
Do you have any ideas?
Roman
[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 50119 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31.1-xenomai
# Fri Oct 2 10:31:03 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
# CONFIG_CLASSIC_RCU is not set
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
#
# Real-time sub-system
#
CONFIG_XENOMAI=y
CONFIG_XENO_GENERIC_STACKPOOL=y
CONFIG_XENO_FASTSYNCH=y
CONFIG_XENO_OPT_NUCLEUS=y
CONFIG_XENO_OPT_PERVASIVE=y
CONFIG_XENO_OPT_PRIOCPL=y
CONFIG_XENO_OPT_PIPELINE_HEAD=y
# CONFIG_XENO_OPT_SCHED_CLASSES is not set
CONFIG_XENO_OPT_PIPE=y
CONFIG_XENO_OPT_PIPE_NRDEV=32
CONFIG_XENO_OPT_REGISTRY_NRSLOTS=512
CONFIG_XENO_OPT_SYS_HEAPSZ=256
CONFIG_XENO_OPT_SYS_STACKPOOLSZ=128
CONFIG_XENO_OPT_SEM_HEAPSZ=12
CONFIG_XENO_OPT_GLOBAL_SEM_HEAPSZ=12
CONFIG_XENO_OPT_STATS=y
# CONFIG_XENO_OPT_DEBUG is not set
# CONFIG_XENO_OPT_SHIRQ is not set
#
# Timing
#
# CONFIG_XENO_OPT_TIMING_PERIODIC is not set
CONFIG_XENO_OPT_TIMING_VIRTICK=1000
CONFIG_XENO_OPT_TIMING_SCHEDLAT=0
#
# Scalability
#
# CONFIG_XENO_OPT_SCALABLE_SCHED is not set
CONFIG_XENO_OPT_TIMER_LIST=y
# CONFIG_XENO_OPT_TIMER_HEAP is not set
# CONFIG_XENO_OPT_TIMER_WHEEL is not set
#
# Machine
#
CONFIG_XENO_HW_FPU=y
#
# NMI watchdog
#
# CONFIG_XENO_HW_NMI_DEBUG_LATENCY is not set
#
# SMI workaround
#
# CONFIG_XENO_HW_SMI_DETECT_DISABLE is not set
CONFIG_XENO_HW_SMI_DETECT=y
# CONFIG_XENO_HW_SMI_WORKAROUND is not set
#
# Interfaces
#
CONFIG_XENO_SKIN_NATIVE=y
CONFIG_XENO_OPT_NATIVE_PERIOD=0
CONFIG_XENO_OPT_NATIVE_PIPE=y
CONFIG_XENO_OPT_NATIVE_PIPE_BUFSZ=1024
CONFIG_XENO_OPT_NATIVE_SEM=y
CONFIG_XENO_OPT_NATIVE_EVENT=y
CONFIG_XENO_OPT_NATIVE_MUTEX=y
CONFIG_XENO_OPT_NATIVE_COND=y
CONFIG_XENO_OPT_NATIVE_QUEUE=y
CONFIG_XENO_OPT_NATIVE_BUFFER=y
CONFIG_XENO_OPT_NATIVE_HEAP=y
CONFIG_XENO_OPT_NATIVE_ALARM=y
CONFIG_XENO_OPT_NATIVE_MPS=y
# CONFIG_XENO_OPT_NATIVE_INTR is not set
CONFIG_XENO_SKIN_POSIX=y
CONFIG_XENO_OPT_POSIX_PERIOD=0
# CONFIG_XENO_OPT_POSIX_SHM is not set
# CONFIG_XENO_OPT_POSIX_INTR is not set
# CONFIG_XENO_OPT_POSIX_SELECT is not set
CONFIG_XENO_OPT_DEBUG_POSIX=y
# CONFIG_XENO_SKIN_PSOS is not set
# CONFIG_XENO_SKIN_UITRON is not set
# CONFIG_XENO_SKIN_VRTX is not set
# CONFIG_XENO_SKIN_VXWORKS is not set
# CONFIG_XENO_SKIN_RTAI is not set
# CONFIG_XENO_OPT_NOWARN_DEPRECATED is not set
CONFIG_XENO_SKIN_RTDM=y
CONFIG_XENO_OPT_RTDM_PERIOD=0
CONFIG_XENO_OPT_RTDM_FILDES=128
# CONFIG_XENO_OPT_RTDM_SELECT is not set
#
# Drivers
#
#
# Serial drivers
#
# CONFIG_XENO_DRIVERS_16550A is not set
#
# Testing drivers
#
CONFIG_XENO_KLATENCY_MODULE=m
CONFIG_XENO_DRIVERS_TIMERBENCH=y
# CONFIG_XENO_DRIVERS_KLATENCY is not set
# CONFIG_XENO_DRIVERS_IRQBENCH is not set
CONFIG_XENO_DRIVERS_SWITCHTEST=y
#
# CAN drivers
#
# CONFIG_XENO_DRIVERS_CAN is not set
#
# COMEDI drivers
#
# CONFIG_XENO_DRIVERS_COMEDI is not set
CONFIG_XENO_DRIVERS_COMEDI_DEBUG=y
CONFIG_XENO_DRIVERS_COMEDI_DEBUG_LEVEL=0
#
# Real-time IPC drivers
#
# CONFIG_XENO_DRIVERS_RTIPC is not set
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=4
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_IPIPE=y
CONFIG_IPIPE_DOMAINS=4
CONFIG_IPIPE_COMPAT=y
CONFIG_IPIPE_DELAYED_ATOMICSW=y
# CONFIG_IPIPE_UNMASKED_CONTEXT_SWITCH is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_NEW_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_X86_CPU_DEBUG is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
# CONFIG_X86_RESERVE_LOW_64K is not set
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_SYSFS_POWER is not set
# CONFIG_ACPI_PROC_EVENT is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
CONFIG_ACPI_VIDEO=y
# CONFIG_ACPI_FAN is not set
CONFIG_ACPI_DOCK=y
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_TARGET_LOG=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_SCH=y
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=y
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
CONFIG_IGB=y
CONFIG_IGBVF=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_IPIPE_DEBUG is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_IMA is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
CONFIG_KVM_TRACE=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [Xenomai-help] Freeze on SMP x86-64 2009-10-02 11:48 [Xenomai-help] Freeze on SMP x86-64 Roman Pisl @ 2009-10-02 12:39 ` Gilles Chanteperdrix 2009-10-02 13:22 ` Roman Pisl 2009-10-02 12:45 ` Peter Soetens ` (2 subsequent siblings) 3 siblings, 1 reply; 19+ messages in thread From: Gilles Chanteperdrix @ 2009-10-02 12:39 UTC (permalink / raw) To: Roman Pisl; +Cc: xenomai Roman Pisl wrote: > Hello, > I just tried x86-64 SMP Linux/Xenomai on my workstation (Intel Core2 > Quad) but it freezes immediately after latency test or clocktest is > started. It freezes even during the boot, when Xenomai debbuging is > enabled. > > The same kernel binary runs seamlessly in KVM on the same machine. > > When I completely disable ACPI, the kernel recognizes only one CPU and > the latency test works. > > The same configuration but for 32bit x86 also runs without freeze. > > Do you have any ideas? Yes. As we repeated many times. Tell us the versions of Xenomai and of the I-pipe patch you use. Send us your .config Manage to get the kernel console output (using a serial cable connected to another PC, or the netconsole, some people even used to send us photos about kernel crashes). -- Gilles. ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [Xenomai-help] Freeze on SMP x86-64 2009-10-02 12:39 ` Gilles Chanteperdrix @ 2009-10-02 13:22 ` Roman Pisl 2009-10-02 13:25 ` Gilles Chanteperdrix ` (2 more replies) 0 siblings, 3 replies; 19+ messages in thread From: Roman Pisl @ 2009-10-02 13:22 UTC (permalink / raw) To: Gilles Chanteperdrix; +Cc: xenomai [-- Attachment #1: Type: text/plain, Size: 1125 bytes --] On 2.10.2009 14:39, Gilles Chanteperdrix wrote: > Roman Pisl wrote: >> Hello, >> I just tried x86-64 SMP Linux/Xenomai on my workstation (Intel Core2 >> Quad) but it freezes immediately after latency test or clocktest is >> started. It freezes even during the boot, when Xenomai debbuging is >> enabled. >> >> The same kernel binary runs seamlessly in KVM on the same machine. >> >> When I completely disable ACPI, the kernel recognizes only one CPU and >> the latency test works. >> >> The same configuration but for 32bit x86 also runs without freeze. >> >> Do you have any ideas? > > Yes. As we repeated many times. > Tell us the versions of Xenomai and of the I-pipe patch you use. > Send us your .config > Manage to get the kernel console output (using a serial cable connected > to another PC, or the netconsole, some people even used to send us > photos about kernel crashes). > I send dmesg output for both 32 and 64 bit. Unfortunately it just freezes with no kernel panic output. When Xenomai debugging is enabled, the kernel freezes after Xenomai is initialized (last message: Xenomai: starting RTDM services). [-- Attachment #2: dmesg.raw32.xenomai --] [-- Type: text/plain, Size: 55775 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31.1-xenomai (root@crane-k) (gcc version 4.4.1 (Gentoo 4.4.1 p1.0) ) #27 SMP Thu Oct 1 14:45:52 CEST 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cd9ffc00 (usable) [ 0.000000] BIOS-e820: 00000000cd9ffc00 - 00000000cda53c00 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cda53c00 - 00000000cda55c00 (ACPI data) [ 0.000000] BIOS-e820: 00000000cda55c00 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000128000000 (usable) [ 0.000000] DMI 2.5 present. [ 0.000000] last_pfn = 0xcd9ff max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D7FFF write-protect [ 0.000000] D8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0CDC00000 mask FFFC00000 uncachable [ 0.000000] 1 base 0CE000000 mask FFE000000 uncachable [ 0.000000] 2 base 0CDB00000 mask FFFF00000 uncachable [ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] ACPI: RSDP 000fec00 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 000fc7cb 00074 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: FACP 000fc8fb 000F4 (v03 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: DSDT ffe9cff8 054AD (v01 DELL dt_ex 00001000 INTL 20050624) [ 0.000000] ACPI: FACS cd9ffc00 00040 [ 0.000000] ACPI: SSDT ffea25c4 000AA (v01 DELL st_ex 00001000 INTL 20050624) [ 0.000000] ACPI: APIC 000fc9ef 00092 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: BOOT 000fca81 00028 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: ASF! 000fcaa9 00096 (v32 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: MCFG 000fcb3f 0003E (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: HPET 000fcb7d 00038 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: TCPA 000fcdd9 00032 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: DMAR 000fce0b 00120 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: SLIC 000fcbb5 00176 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2402MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 000164c7cc] TEXT DATA BSS ==> [0001000000 - 000164c7cc] [ 0.000000] #4 [000009a000 - 0000100000] BIOS reserved ==> [000009a000 - 0000100000] [ 0.000000] #5 [000164d000 - 00016531a0] BRK ==> [000164d000 - 00016531a0] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00fe710] fe710 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000cd9ff [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009a [ 0.000000] 0: 0x00000100 -> 0x000cd9ff [ 0.000000] On node 0 totalpages: 842137 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3962 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4805 pages used for memmap [ 0.000000] HighMem zone: 610108 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] 8 Processors exceeds NR_CPUS limit of 4 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) [ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c3065000, static data 36060 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 835556 [ 0.000000] Kernel command line: root=/dev/sda6 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Initializing HighMem for node 0 (000377fe:000cd9ff) [ 0.000000] Memory: 3333372k/3368956k available (3631k kernel code, 34204k reserved, 1580k data, 324k init, 2459652k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff6b000 - 0xfffff000 ( 592 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc1517000 - 0xc1568000 ( 324 kB) [ 0.000000] .data : 0xc138bddb - 0xc1516fec (1580 kB) [ 0.000000] .text : 0xc1000000 - 0xc138bddb (3631 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:384 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2659.877 MHz processor. [ 0.000040] I-pipe 2.4-05: pipeline enabled. [ 0.001515] Console: colour VGA+ 80x25 [ 0.001517] console [tty0] enabled [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.75 BogoMIPS (lpj=10639508) [ 0.004169] Mount-cache hash table entries: 512 [ 0.004334] Initializing cgroup subsys ns [ 0.004406] Initializing cgroup subsys cpuacct [ 0.004479] Initializing cgroup subsys freezer [ 0.004558] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004661] CPU: L2 cache: 3072K [ 0.004730] CPU: Physical Processor ID: 0 [ 0.004800] CPU: Processor Core ID: 0 [ 0.004870] mce: CPU supports 6 MCE banks [ 0.004945] CPU0: Thermal monitoring enabled (TM2) [ 0.005022] Performance Counters: Core2 events, Intel PMU driver. [ 0.005162] ... version: 2 [ 0.005232] ... bit width: 40 [ 0.005302] ... generic counters: 2 [ 0.005372] ... value mask: 000000ffffffffff [ 0.005446] ... max period: 000000007fffffff [ 0.005519] ... fixed-purpose counters: 3 [ 0.005589] ... counter mask: 0000000700000003 [ 0.005664] Checking 'hlt' instruction... OK. [ 0.020484] ACPI: Core revision 20090521 [ 0.259694] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.260001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.260001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.260001] ..... (found apic 0 pin 2) ... [ 0.303358] ....... works. [ 0.303425] CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.304001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5320.29 BogoMIPS (lpj=10640596) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.389335] CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.390145] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.392070] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 5320.32 BogoMIPS (lpj=10640641) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU2: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.485394] CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.486198] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.488068] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 5320.31 BogoMIPS (lpj=10640639) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU3: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.581344] CPU3: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.582761] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.584017] Brought up 4 CPUs [ 0.584092] Total of 4 processors activated (21280.69 BogoMIPS). [ 0.584228] NET: Registered protocol family 16 [ 0.588076] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.588121] ACPI: bus type pci registered [ 0.588200] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.588277] PCI: MCFG area at e0000000 reserved in E820 [ 0.588350] PCI: Using MMCONFIG for extended config space [ 0.588423] PCI: Using configuration type 1 for base access [ 0.596617] bio: create slab <bio-0> at 0 [ 0.596617] ACPI: EC: Look up EC in DSDT [ 0.659030] ACPI: BIOS _OSI(Linux) query ignored [ 0.686364] ACPI: Interpreter enabled [ 0.686434] ACPI: (supports S0 S5) [ 0.686563] ACPI: Using IOAPIC for interrupt routing [ 0.792364] ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 7F 20090521 tbutils-246 [ 0.797461] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.804794] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.804900] pci 0000:00:02.0: reg 10 64bit mmio: [0xfe800000-0xfebfffff] [ 0.804900] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.804900] pci 0000:00:02.0: reg 20 io port: [0xec90-0xec97] [ 0.804900] pci 0000:00:02.1: reg 10 64bit mmio: [0xfe700000-0xfe7fffff] [ 0.804900] pci 0000:00:03.0: reg 10 64bit mmio: [0xfeda6000-0xfeda600f] [ 0.804900] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.804900] pci 0000:00:03.0: PME# disabled [ 0.804900] pci 0000:00:03.2: reg 10 io port: [0xfe80-0xfe87] [ 0.804900] pci 0000:00:03.2: reg 14 io port: [0xfe90-0xfe93] [ 0.804900] pci 0000:00:03.2: reg 18 io port: [0xfea0-0xfea7] [ 0.804900] pci 0000:00:03.2: reg 1c io port: [0xfeb0-0xfeb3] [ 0.804900] pci 0000:00:03.2: reg 20 io port: [0xfef0-0xfeff] [ 0.804900] pci 0000:00:03.3: reg 10 io port: [0xec98-0xec9f] [ 0.804900] pci 0000:00:03.3: reg 14 32bit mmio: [0xfe6d8000-0xfe6d8fff] [ 0.804900] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe6e0000-0xfe6fffff] [ 0.804900] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe6d9000-0xfe6d9fff] [ 0.804900] pci 0000:00:19.0: reg 18 io port: [0xecc0-0xecdf] [ 0.804900] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.804900] pci 0000:00:19.0: PME# disabled [ 0.804900] pci 0000:00:1a.0: reg 20 io port: [0xff20-0xff3f] [ 0.804900] pci 0000:00:1a.1: reg 20 io port: [0xff00-0xff1f] [ 0.804900] pci 0000:00:1a.2: reg 20 io port: [0xfc00-0xfc1f] [ 0.804941] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe6da000-0xfe6da3ff] [ 0.804989] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.805061] pci 0000:00:1a.7: PME# disabled [ 0.805159] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe6dc000-0xfe6dffff] [ 0.805195] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.805265] pci 0000:00:1b.0: PME# disabled [ 0.805377] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.805448] pci 0000:00:1c.0: PME# disabled [ 0.805561] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.805631] pci 0000:00:1c.1: PME# disabled [ 0.805744] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f] [ 0.805803] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f] [ 0.805863] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f] [ 0.805926] pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980000-0xff9803ff] [ 0.805974] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.806045] pci 0000:00:1d.7: PME# disabled [ 0.806261] pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07] [ 0.806266] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13] [ 0.806271] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27] [ 0.806276] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33] [ 0.806282] pci 0000:00:1f.2: reg 20 io port: [0xfec0-0xfedf] [ 0.806287] pci 0000:00:1f.2: reg 24 32bit mmio: [0xff970000-0xff9707ff] [ 0.806313] pci 0000:00:1f.2: PME# supported from D3hot [ 0.806382] pci 0000:00:1f.2: PME# disabled [ 0.806470] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe6db000-0xfe6db0ff] [ 0.806482] pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff] [ 0.806531] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe500000-0xfe5fffff] [ 0.806569] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe400000-0xfe4fffff] [ 0.806601] pci 0000:03:00.0: reg 10 32bit mmio: [0xfe3fe000-0xfe3fefff] [ 0.806642] pci 0000:03:00.0: supports D1 D2 [ 0.806643] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot [ 0.806714] pci 0000:03:00.0: PME# disabled [ 0.808034] pci 0000:03:02.0: reg 10 io port: [0xdc00-0xdcff] [ 0.808040] pci 0000:03:02.0: reg 14 32bit mmio: [0xfe3ff000-0xfe3ff0ff] [ 0.808078] pci 0000:03:02.0: supports D1 D2 [ 0.808080] pci 0000:03:02.0: PME# supported from D1 D2 D3hot D3cold [ 0.808151] pci 0000:03:02.0: PME# disabled [ 0.808252] pci 0000:00:1e.0: transparent bridge [ 0.808331] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] [ 0.808335] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe300000-0xfe3fffff] [ 0.808351] pci_bus 0000:00: on NUMA node 0 [ 0.808354] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.808897] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] [ 0.809254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [ 0.809537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT] [ 2.257695] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 2.257745] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 2.260997] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 2.262161] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 2.263326] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 2.264607] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 2.265770] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 2.266941] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 2.267564] SCSI subsystem initialized [ 2.268034] libata version 3.00 loaded. [ 2.268034] usbcore: registered new interface driver usbfs [ 2.268093] usbcore: registered new interface driver hub [ 2.268093] usbcore: registered new device driver usb [ 2.268093] PCI: Using ACPI for IRQ routing [ 2.292005] pnp: PnP ACPI init [ 2.292077] ACPI: bus type pnp registered [ 2.341737] pnp: PnP ACPI: found 9 devices [ 2.341803] ACPI: ACPI bus type pnp unregistered [ 2.341884] system 00:01: ioport range 0x800-0x85f has been reserved [ 2.341954] system 00:01: ioport range 0xc00-0xc7f has been reserved [ 2.342025] system 00:01: ioport range 0x860-0x8ff has been reserved [ 2.377190] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 2.377259] pci 0000:00:1c.0: IO window: disabled [ 2.377329] pci 0000:00:1c.0: MEM window: 0xfe500000-0xfe5fffff [ 2.377399] pci 0000:00:1c.0: PREFETCH window: disabled [ 2.377469] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 2.377537] pci 0000:00:1c.1: IO window: disabled [ 2.377606] pci 0000:00:1c.1: MEM window: 0xfe400000-0xfe4fffff [ 2.377687] pci 0000:00:1c.1: PREFETCH window: disabled [ 2.377756] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 2.377826] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 2.377897] pci 0000:00:1e.0: MEM window: 0xfe300000-0xfe3fffff [ 2.377968] pci 0000:00:1e.0: PREFETCH window: disabled [ 2.378044] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.378116] pci 0000:00:1c.0: setting latency timer to 64 [ 2.378123] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.378195] pci 0000:00:1c.1: setting latency timer to 64 [ 2.378200] pci 0000:00:1e.0: setting latency timer to 64 [ 2.378203] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 2.378205] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 2.378207] pci_bus 0000:01: resource 1 mem: [0xfe500000-0xfe5fffff] [ 2.378210] pci_bus 0000:02: resource 1 mem: [0xfe400000-0xfe4fffff] [ 2.378212] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 2.378214] pci_bus 0000:03: resource 1 mem: [0xfe300000-0xfe3fffff] [ 2.378216] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 2.378218] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] [ 2.378228] NET: Registered protocol family 2 [ 2.378309] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 2.378425] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.378791] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 2.378990] TCP: Hash tables configured (established 131072 bind 65536) [ 2.379060] TCP reno registered [ 2.379159] NET: Registered protocol family 1 [ 2.379363] Simple Boot Flag at 0x7a set to 0x1 [ 2.380986] audit: initializing netlink socket (disabled) [ 2.381060] type=2000 audit(1254479895.379:1): initialized [ 2.384836] I-pipe: Domain Xenomai registered. [ 2.385002] Xenomai: hal/i386 started. [ 2.385091] Xenomai: scheduling class idle registered. [ 2.385159] Xenomai: scheduling class rt registered. [ 2.387263] Xenomai: real-time nucleus v2.5-rc3 (Flying In A Blue Dream) loaded. [ 2.387363] Xenomai: debug mode enabled. [ 2.387588] Xenomai: starting native API services. [ 2.387655] Xenomai: starting POSIX services. [ 2.387744] Xenomai: starting RTDM services. [ 2.388060] highmem bounce pool size: 64 pages [ 2.388129] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 2.392034] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 2.392709] fuse init (API version 7.12) [ 2.393079] msgmni has been set to 1708 [ 2.393492] alg: No test for stdrng (krng) [ 2.393709] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.393811] io scheduler noop registered [ 2.393877] io scheduler anticipatory registered [ 2.393944] io scheduler deadline registered [ 2.394097] io scheduler cfq registered (default) [ 2.394172] pci 0000:00:02.0: Boot video device [ 2.394182] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080 [ 2.394183] pci 0000:00:1a.0: Performing full reset [ 2.394198] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0080 [ 2.394199] pci 0000:00:1a.1: Performing full reset [ 2.394214] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0080 [ 2.394215] pci 0000:00:1a.2: Performing full reset [ 2.394243] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080 [ 2.394245] pci 0000:00:1d.0: Performing full reset [ 2.394259] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0080 [ 2.394261] pci 0000:00:1d.1: Performing full reset [ 2.394275] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0080 [ 2.394276] pci 0000:00:1d.2: Performing full reset [ 2.394451] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 2.394458] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 2.394728] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X [ 2.394735] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 2.395091] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.399269] Non-volatile memory driver v1.3 [ 2.399336] Linux agpgart interface v0.103 [ 2.399412] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset [ 2.400297] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 2.402517] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 2.402713] [drm] Initialized drm 1.1.0 20060810 [ 2.402793] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.402865] i915 0000:00:02.0: setting latency timer to 64 [ 2.405357] i915 0000:00:02.0: irq 26 for MSI/MSI-X [ 3.702407] [drm] TMDS-8: set mode 1920x1080 13 [ 3.871574] Switched to high resolution mode on CPU 1 [ 3.871577] Switched to high resolution mode on CPU 2 [ 3.871583] Switched to high resolution mode on CPU 3 [ 3.875560] Switched to high resolution mode on CPU 0 [ 3.935314] Console: switching to colour frame buffer device 240x67 [ 3.940952] [drm] fb0: inteldrmfb frame buffer device [ 3.940986] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.941099] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.196125] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 4.196772] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 4.196931] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.197061] 0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17) is a 16550A [ 4.199194] brd: module loaded [ 4.200218] loop: module loaded [ 4.200555] ahci 0000:00:1f.2: version 3.0 [ 4.200565] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.200621] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X [ 4.200674] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x2f impl RAID mode [ 4.200715] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems [ 4.200759] ahci 0000:00:1f.2: setting latency timer to 64 [ 4.240051] scsi0 : ahci [ 4.240248] scsi1 : ahci [ 4.240451] scsi2 : ahci [ 4.240656] scsi3 : ahci [ 4.240860] scsi4 : ahci [ 4.241065] scsi5 : ahci [ 4.242675] ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 27 [ 4.242713] ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 27 [ 4.242750] ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 27 [ 4.242786] ata4: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970280 irq 27 [ 4.242822] ata5: DUMMY [ 4.242836] ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 27 [ 4.243179] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 4.243212] Copyright (c) 1999-2006 Intel Corporation. [ 4.243311] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 4.243341] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 4.243388] e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 4.243424] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb [ 4.243462] e1000e 0000:00:19.0: setting latency timer to 64 [ 4.243525] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 4.356560] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:e8:39:3c:95 [ 4.356598] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 4.356661] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: 2021ff-0ff [ 4.356750] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 [ 4.356784] Copyright (c) 2007-2009 Intel Corporation. [ 4.356863] Intel(R) Virtual Function Network Driver - version 1.0.0-k0 [ 4.356896] Copyright (c) 2009 Intel Corporation. [ 4.356982] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 4.357032] 8139cp 0000:03:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 4.357129] tun: Universal TUN/TAP device driver, 1.6 [ 4.357155] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 4.358355] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.359382] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96 [ 4.359397] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 4.360466] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 4.360469] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 4.361564] drivers/usb/core/inode.c: creating file 'devices' [ 4.361567] drivers/usb/core/inode.c: creating file '001' [ 4.361637] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 4.362735] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 4.362739] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 4.362751] ehci_hcd 0000:00:1a.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT [ 4.366648] ehci_hcd 0000:00:1a.7: debug port 1 [ 4.367752] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 4.367754] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 4.367764] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe6da000 [ 4.368916] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.372782] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 4.384006] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 4.385219] usb usb1: default language 0x0409 [ 4.385226] usb usb1: udev 1, busnum 1, minor = 0 [ 4.385228] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.386384] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.387567] usb usb1: Product: EHCI Host Controller [ 4.388784] usb usb1: Manufacturer: Linux 2.6.31.1-xenomai ehci_hcd [ 4.390005] usb usb1: SerialNumber: 0000:00:1a.7 [ 4.391251] usb usb1: uevent [ 4.391310] usb usb1: usb_probe_device [ 4.391312] usb usb1: configuration #1 chosen from 1 choice [ 4.392568] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 4.392578] usb 1-0:1.0: uevent [ 4.392632] hub 1-0:1.0: usb_probe_interface [ 4.392634] hub 1-0:1.0: usb_probe_interface - got id [ 4.392636] hub 1-0:1.0: USB hub found [ 4.393904] hub 1-0:1.0: 6 ports detected [ 4.395165] hub 1-0:1.0: standalone hub [ 4.395167] hub 1-0:1.0: no power switching (usb 1.0) [ 4.395168] hub 1-0:1.0: individual port over-current protection [ 4.395170] hub 1-0:1.0: power on to power good time: 20ms [ 4.395174] hub 1-0:1.0: local power source is good [ 4.395176] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 4.395198] drivers/usb/core/inode.c: creating file '001' [ 4.395219] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.396538] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 4.396541] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.397869] drivers/usb/core/inode.c: creating file '002' [ 4.397935] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 4.399285] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 4.399288] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 4.399301] ehci_hcd 0000:00:1d.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT [ 4.403178] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.404530] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 4.404532] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 4.404542] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000 [ 4.405889] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.409768] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 4.420010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 4.421400] usb usb2: default language 0x0409 [ 4.421406] usb usb2: udev 1, busnum 2, minor = 128 [ 4.421408] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.422728] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.424076] usb usb2: Product: EHCI Host Controller [ 4.425406] usb usb2: Manufacturer: Linux 2.6.31.1-xenomai ehci_hcd [ 4.426712] usb usb2: SerialNumber: 0000:00:1d.7 [ 4.428038] usb usb2: uevent [ 4.428092] usb usb2: usb_probe_device [ 4.428094] usb usb2: configuration #1 chosen from 1 choice [ 4.429396] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 4.429406] usb 2-0:1.0: uevent [ 4.429461] hub 2-0:1.0: usb_probe_interface [ 4.429463] hub 2-0:1.0: usb_probe_interface - got id [ 4.429465] hub 2-0:1.0: USB hub found [ 4.430743] hub 2-0:1.0: 6 ports detected [ 4.432025] hub 2-0:1.0: standalone hub [ 4.432027] hub 2-0:1.0: no power switching (usb 1.0) [ 4.432028] hub 2-0:1.0: individual port over-current protection [ 4.432030] hub 2-0:1.0: power on to power good time: 20ms [ 4.432034] hub 2-0:1.0: local power source is good [ 4.432035] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 4.432059] drivers/usb/core/inode.c: creating file '001' [ 4.432123] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.433435] ohci_hcd: block sizes: ed 64 td 64 [ 4.433496] uhci_hcd: USB Universal Host Controller Interface driver [ 4.434808] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.436102] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4.436105] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 4.437388] drivers/usb/core/inode.c: creating file '003' [ 4.437455] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 4.438756] uhci_hcd 0000:00:1a.0: detected 2 ports [ 4.440063] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.440065] uhci_hcd 0000:00:1a.0: Performing full reset [ 4.440077] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 4.440087] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20 [ 4.441429] usb usb3: default language 0x0409 [ 4.441435] usb usb3: udev 1, busnum 3, minor = 256 [ 4.441437] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.442778] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.444166] usb usb3: Product: UHCI Host Controller [ 4.445517] usb usb3: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd [ 4.446878] usb usb3: SerialNumber: 0000:00:1a.0 [ 4.448281] usb usb3: uevent [ 4.448337] usb usb3: usb_probe_device [ 4.448339] usb usb3: configuration #1 chosen from 1 choice [ 4.449744] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 4.449756] usb 3-0:1.0: uevent [ 4.449809] hub 3-0:1.0: usb_probe_interface [ 4.449811] hub 3-0:1.0: usb_probe_interface - got id [ 4.449813] hub 3-0:1.0: USB hub found [ 4.451187] hub 3-0:1.0: 2 ports detected [ 4.452550] hub 3-0:1.0: standalone hub [ 4.452552] hub 3-0:1.0: no power switching (usb 1.0) [ 4.452553] hub 3-0:1.0: individual port over-current protection [ 4.452555] hub 3-0:1.0: power on to power good time: 2ms [ 4.452559] hub 3-0:1.0: local power source is good [ 4.452561] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 4.452571] drivers/usb/core/inode.c: creating file '001' [ 4.452592] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.453984] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 4.453986] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 4.455344] drivers/usb/core/inode.c: creating file '004' [ 4.455416] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 4.456789] uhci_hcd 0000:00:1a.1: detected 2 ports [ 4.458152] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.458154] uhci_hcd 0000:00:1a.1: Performing full reset [ 4.458166] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 4.458176] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00 [ 4.459536] usb usb4: default language 0x0409 [ 4.459542] usb usb4: udev 1, busnum 4, minor = 384 [ 4.459544] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.460907] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.462280] usb usb4: Product: UHCI Host Controller [ 4.463616] usb usb4: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd [ 4.464983] usb usb4: SerialNumber: 0000:00:1a.1 [ 4.466349] usb usb4: uevent [ 4.466405] usb usb4: usb_probe_device [ 4.466406] usb usb4: configuration #1 chosen from 1 choice [ 4.467737] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 4.467747] usb 4-0:1.0: uevent [ 4.467803] hub 4-0:1.0: usb_probe_interface [ 4.467805] hub 4-0:1.0: usb_probe_interface - got id [ 4.467806] hub 4-0:1.0: USB hub found [ 4.469147] hub 4-0:1.0: 2 ports detected [ 4.470450] hub 4-0:1.0: standalone hub [ 4.470451] hub 4-0:1.0: no power switching (usb 1.0) [ 4.470453] hub 4-0:1.0: individual port over-current protection [ 4.470455] hub 4-0:1.0: power on to power good time: 2ms [ 4.470458] hub 4-0:1.0: local power source is good [ 4.470460] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 4.470471] drivers/usb/core/inode.c: creating file '001' [ 4.470491] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 4.471815] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 4.471818] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 4.473140] drivers/usb/core/inode.c: creating file '005' [ 4.473205] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 4.474513] uhci_hcd 0000:00:1a.2: detected 2 ports [ 4.475794] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.475796] uhci_hcd 0000:00:1a.2: Performing full reset [ 4.475808] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 4.475812] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00 [ 4.477124] usb usb5: default language 0x0409 [ 4.477129] usb usb5: udev 1, busnum 5, minor = 512 [ 4.477131] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.478413] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.479692] usb usb5: Product: UHCI Host Controller [ 4.480972] usb usb5: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd [ 4.482255] usb usb5: SerialNumber: 0000:00:1a.2 [ 4.483554] usb usb5: uevent [ 4.483613] usb usb5: usb_probe_device [ 4.483615] usb usb5: configuration #1 chosen from 1 choice [ 4.484911] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 4.484921] usb 5-0:1.0: uevent [ 4.484973] hub 5-0:1.0: usb_probe_interface [ 4.484975] hub 5-0:1.0: usb_probe_interface - got id [ 4.484976] hub 5-0:1.0: USB hub found [ 4.486268] hub 5-0:1.0: 2 ports detected [ 4.487528] hub 5-0:1.0: standalone hub [ 4.487530] hub 5-0:1.0: no power switching (usb 1.0) [ 4.487531] hub 5-0:1.0: individual port over-current protection [ 4.487533] hub 5-0:1.0: power on to power good time: 2ms [ 4.487536] hub 5-0:1.0: local power source is good [ 4.487538] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 4.487549] drivers/usb/core/inode.c: creating file '001' [ 4.487568] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.488862] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4.488865] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.490157] drivers/usb/core/inode.c: creating file '006' [ 4.490221] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 4.491507] uhci_hcd 0000:00:1d.0: detected 2 ports [ 4.492791] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.492793] uhci_hcd 0000:00:1d.0: Performing full reset [ 4.492805] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 4.492809] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80 [ 4.494104] usb usb6: default language 0x0409 [ 4.494110] usb usb6: udev 1, busnum 6, minor = 640 [ 4.494112] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.495400] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.496717] usb usb6: Product: UHCI Host Controller [ 4.498005] usb usb6: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd [ 4.499288] usb usb6: SerialNumber: 0000:00:1d.0 [ 4.500608] usb usb6: uevent [ 4.500631] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT [ 4.500634] hub 1-0:1.0: port 5: status 0501 change 0001 [ 4.500641] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT [ 4.500644] hub 1-0:1.0: port 6: status 0501 change 0001 [ 4.500654] usb usb6: usb_probe_device [ 4.500656] usb usb6: configuration #1 chosen from 1 choice [ 4.501947] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 4.501957] usb 6-0:1.0: uevent [ 4.502012] hub 6-0:1.0: usb_probe_interface [ 4.502014] hub 6-0:1.0: usb_probe_interface - got id [ 4.502016] hub 6-0:1.0: USB hub found [ 4.503299] hub 6-0:1.0: 2 ports detected [ 4.504573] hub 6-0:1.0: standalone hub [ 4.504574] hub 6-0:1.0: no power switching (usb 1.0) [ 4.504576] hub 6-0:1.0: individual port over-current protection [ 4.504577] hub 6-0:1.0: power on to power good time: 2ms [ 4.504581] hub 6-0:1.0: local power source is good [ 4.504582] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 4.504593] drivers/usb/core/inode.c: creating file '001' [ 4.504613] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.505912] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 4.505915] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.507194] drivers/usb/core/inode.c: creating file '007' [ 4.507268] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 4.508565] uhci_hcd 0000:00:1d.1: detected 2 ports [ 4.509851] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.509853] uhci_hcd 0000:00:1d.1: Performing full reset [ 4.509865] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 4.509869] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60 [ 4.511165] usb usb7: default language 0x0409 [ 4.511171] usb usb7: udev 1, busnum 7, minor = 768 [ 4.511173] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.512480] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.513808] usb usb7: Product: UHCI Host Controller [ 4.515111] usb usb7: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd [ 4.516415] usb usb7: SerialNumber: 0000:00:1d.1 [ 4.517726] usb usb7: uevent [ 4.517782] usb usb7: usb_probe_device [ 4.517784] usb usb7: configuration #1 chosen from 1 choice [ 4.519068] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 4.519078] usb 7-0:1.0: uevent [ 4.519136] hub 7-0:1.0: usb_probe_interface [ 4.519138] hub 7-0:1.0: usb_probe_interface - got id [ 4.519140] hub 7-0:1.0: USB hub found [ 4.520430] hub 7-0:1.0: 2 ports detected [ 4.521703] hub 7-0:1.0: standalone hub [ 4.521705] hub 7-0:1.0: no power switching (usb 1.0) [ 4.521706] hub 7-0:1.0: individual port over-current protection [ 4.521708] hub 7-0:1.0: power on to power good time: 2ms [ 4.521711] hub 7-0:1.0: local power source is good [ 4.521713] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 4.521724] drivers/usb/core/inode.c: creating file '001' [ 4.521744] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.523042] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 4.523045] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.524354] drivers/usb/core/inode.c: creating file '008' [ 4.524417] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 4.525728] uhci_hcd 0000:00:1d.2: detected 2 ports [ 4.527006] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 4.527008] uhci_hcd 0000:00:1d.2: Performing full reset [ 4.527020] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 4.527029] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 4.528337] usb usb8: default language 0x0409 [ 4.528343] usb usb8: udev 1, busnum 8, minor = 896 [ 4.528345] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.529636] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.530943] usb usb8: Product: UHCI Host Controller [ 4.532259] usb usb8: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd [ 4.533564] usb usb8: SerialNumber: 0000:00:1d.2 [ 4.534868] usb usb8: uevent [ 4.534910] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 4.534934] usb usb8: usb_probe_device [ 4.534936] usb usb8: configuration #1 chosen from 1 choice [ 4.536230] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 4.536240] usb 8-0:1.0: uevent [ 4.536291] hub 8-0:1.0: usb_probe_interface [ 4.536293] hub 8-0:1.0: usb_probe_interface - got id [ 4.536294] hub 8-0:1.0: USB hub found [ 4.537596] hub 8-0:1.0: 2 ports detected [ 4.538860] hub 8-0:1.0: standalone hub [ 4.538861] hub 8-0:1.0: no power switching (usb 1.0) [ 4.538863] hub 8-0:1.0: individual port over-current protection [ 4.538865] hub 8-0:1.0: power on to power good time: 2ms [ 4.538868] hub 8-0:1.0: local power source is good [ 4.538870] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 4.538880] drivers/usb/core/inode.c: creating file '001' [ 4.539012] usbcore: registered new interface driver usblp [ 4.540303] Initializing USB Mass Storage driver... [ 4.541690] usbcore: registered new interface driver usb-storage [ 4.542973] USB Mass Storage support registered. [ 4.544346] usbcore: registered new interface driver libusual [ 4.545853] PNP: No PS/2 controller found. Probing ports directly. [ 4.549734] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.551031] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.552025] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.552431] mice: PS/2 mouse device common for all mice [ 4.553900] rtc_cmos 00:05: RTC can wake from S4 [ 4.555246] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 4.556552] rtc0: alarms up to one day, 242 bytes nvram [ 4.557909] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.559324] cpuidle: using governor ladder [ 4.560627] cpuidle: using governor menu [ 4.561522] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.561538] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.561549] ata3: SATA link down (SStatus 4 SControl 300) [ 4.561563] ata4: SATA link down (SStatus 4 SControl 300) [ 4.561575] ata6: SATA link down (SStatus 0 SControl 300) [ 4.568336] ata2.00: ATAPI: PLDS DVD+/-RW DH-16AAS, JD12, max UDMA/100, ATAPI AN [ 4.569960] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.570044] usbcore: registered new interface driver hiddev [ 4.571359] usbcore: registered new interface driver usbhid [ 4.572627] usbhid: v2.6:USB HID core driver [ 4.572645] ata2.00: configured for UDMA/100 [ 4.575276] Netfilter messages via NETLINK v0.30. [ 4.576534] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 4.577940] ctnetlink v0.93: registering with nfnetlink. [ 4.579246] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.580515] TCP cubic registered [ 4.580567] ata2: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0 [ 4.580569] ata2: irq_stat 0x40000008 [ 4.584331] Initializing XFRM netlink socket [ 4.585874] NET: Registered protocol family 10 [ 4.587252] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 4.588010] uhci_hcd 0000:00:1a.2: port 1 portsc 008a,00 [ 4.588019] uhci_hcd 0000:00:1a.2: port 2 portsc 008a,00 [ 4.588396] ata1.00: ATA-8: ST3500418AS, CC44, max UDMA/133 [ 4.588399] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.591099] IPv6 over IPv4 tunneling driver [ 4.592457] NET: Registered protocol family 17 [ 4.594010] RPC: Registered udp transport module. [ 4.595251] RPC: Registered tcp transport module. [ 4.596488] Using IPI No-Shortcut mode [ 4.604012] hub 1-0:1.0: state 7 ports 6 chg 0060 evt 0000 [ 4.604021] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s [ 4.627805] ata1.00: configured for UDMA/133 [ 4.629107] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4 [ 4.630333] ata1: irq_stat 0x00400040, connection status changed [ 4.631560] ata1: hard resetting link [ 4.656198] ehci_hcd 0000:00:1a.7: port 5 full speed --> companion [ 4.656201] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT [ 4.656204] hub 1-0:1.0: port 5 not reset yet, waiting 50ms [ 4.712011] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC [ 4.712028] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 4.712033] ehci_hcd 0000:00:1a.7: port 6 low speed --> companion [ 4.768009] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC [ 4.768024] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.768028] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.768032] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.768036] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040 [ 4.768042] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 4.768049] uhci_hcd 0000:00:1a.2: port 1 portsc 0093,00 [ 4.768055] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 4.896011] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 5.008009] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 5.144006] usb 5-1: ep0 maxpacket = 8 [ 5.181173] usb 5-1: skipped 1 descriptor after interface [ 5.181176] usb 5-1: skipped 1 descriptor after interface [ 5.186167] usb 5-1: default language 0x0409 [ 5.205166] usb 5-1: udev 2, busnum 5, minor = 513 [ 5.205168] usb 5-1: New USB device found, idVendor=413c, idProduct=2101 [ 5.206481] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.207737] usb 5-1: Product: Dell Smart Card Reader Keyboard [ 5.209007] usb 5-1: Manufacturer: Dell [ 5.210267] usb 5-1: uevent [ 5.210327] usb 5-1: usb_probe_device [ 5.210329] usb 5-1: configuration #1 chosen from 1 choice [ 5.214170] usb 5-1: adding 5-1:1.0 (config #1, interface 0) [ 5.214185] usb 5-1:1.0: uevent [ 5.214231] usbhid 5-1:1.0: usb_probe_interface [ 5.214233] usbhid 5-1:1.0: usb_probe_interface - got id [ 5.219449] input: Dell Dell Smart Card Reader Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input0 [ 5.220755] uhci_hcd 0000:00:1a.2: reserve dev 2 ep81-INT, period 16, phase 8, 17 us [ 5.220875] generic-usb 0003:413C:2101.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell Dell Smart Card Reader Keyboard] on usb-0000:00:1a.2-1/input0 [ 5.222277] usb 5-1: adding 5-1:1.1 (config #1, interface 1) [ 5.222287] usb 5-1:1.1: uevent [ 5.222363] drivers/usb/core/inode.c: creating file '002' [ 5.222377] uhci_hcd 0000:00:1a.2: port 2 portsc 01a3,00 [ 5.222383] hub 5-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 5.352011] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 5.352016] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.419706] ata1.00: configured for UDMA/133 [ 5.421089] ata1: EH complete [ 5.436091] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC44 PQ: 0 ANSI: 5 [ 5.437749] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 5.437785] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.440511] sd 0:0:0:0: [sda] Write Protect is off [ 5.440865] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DH-16AAS JD12 PQ: 0 ANSI: 5 [ 5.443325] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.443348] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.444844] sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.448341] Uniform CD-ROM driver Revision: 3.20 [ 5.449885] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.450004] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.454674] sda1 sda2 sda3 sda4 < [ 5.468008] usb 5-2: new low speed USB device using uhci_hcd and address 3 [ 5.480775] sda5 sda6 > [ 5.501194] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.518222] kjournald starting. Commit interval 5 seconds [ 5.518228] EXT3-fs: mounted filesystem with writeback data mode. [ 5.518236] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. [ 5.522581] Freeing unused kernel memory: 324k freed [ 5.608011] usb usb3: suspend_rh (auto-stop) [ 5.608030] usb usb4: suspend_rh (auto-stop) [ 5.608048] usb usb6: suspend_rh (auto-stop) [ 5.608066] usb usb7: suspend_rh (auto-stop) [ 5.608084] usb usb8: suspend_rh (auto-stop) [ 5.626190] usb 5-2: skipped 1 descriptor after interface [ 5.631187] usb 5-2: default language 0x0409 [ 5.640190] usb 5-2: udev 3, busnum 5, minor = 514 [ 5.640193] usb 5-2: New USB device found, idVendor=0461, idProduct=4d51 [ 5.641683] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 5.643117] usb 5-2: Product: DELL Laser Mouse [ 5.644594] usb 5-2: uevent [ 5.644671] usb 5-2: usb_probe_device [ 5.644673] usb 5-2: configuration #1 chosen from 1 choice [ 5.648194] usb 5-2: adding 5-2:1.0 (config #1, interface 0) [ 5.648210] usb 5-2:1.0: uevent [ 5.648287] usbhid 5-2:1.0: usb_probe_interface [ 5.648289] usbhid 5-2:1.0: usb_probe_interface - got id [ 5.662445] input: DELL Laser Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input1 [ 5.664157] generic-usb 0003:0461:4D51.0002: input,hidraw1: USB HID v1.11 Mouse [DELL Laser Mouse] on usb-0000:00:1a.2-2/input0 [ 5.665713] drivers/usb/core/inode.c: creating file '003' [ 5.665725] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 6.269993] udev: starting version 141 [ 6.281666] usb usb3: uevent [ 6.281679] usb 3-0:1.0: uevent [ 6.281713] usb usb4: uevent [ 6.281725] usb 4-0:1.0: uevent [ 6.281758] usb usb5: uevent [ 6.281770] usb 5-0:1.0: uevent [ 6.281784] usb 5-1: uevent [ 6.281796] usb 5-1:1.0: uevent [ 6.281868] usb 5-1:1.1: uevent [ 6.281882] usb 5-2: uevent [ 6.281894] usb 5-2:1.0: uevent [ 6.281988] usb usb1: uevent [ 6.282000] usb 1-0:1.0: uevent [ 6.282125] usb usb6: uevent [ 6.282137] usb 6-0:1.0: uevent [ 6.282169] usb usb7: uevent [ 6.282181] usb 7-0:1.0: uevent [ 6.282213] usb usb8: uevent [ 6.282225] usb 8-0:1.0: uevent [ 6.282257] usb usb2: uevent [ 6.282270] usb 2-0:1.0: uevent [ 6.296835] usb 5-2:1.0: uevent [ 6.296869] usb 5-1:1.0: uevent [ 6.296914] usb 5-2: uevent [ 6.296945] usb 5-1: uevent [ 6.299259] usb 5-2:1.0: uevent [ 6.299318] usb 5-2: uevent [ 6.781519] hub 2-0:1.0: hub_suspend [ 6.781527] usb usb2: bus auto-suspend [ 6.781529] ehci_hcd 0000:00:1d.7: suspend root hub [ 6.781548] hub 3-0:1.0: hub_suspend [ 6.781552] usb usb3: bus auto-suspend [ 6.781554] usb usb3: suspend_rh [ 6.781568] hub 4-0:1.0: hub_suspend [ 6.781571] usb usb4: bus auto-suspend [ 6.781574] usb usb4: suspend_rh [ 6.781587] hub 6-0:1.0: hub_suspend [ 6.781590] usb usb6: bus auto-suspend [ 6.781592] usb usb6: suspend_rh [ 6.781605] hub 7-0:1.0: hub_suspend [ 6.781608] usb usb7: bus auto-suspend [ 6.781610] usb usb7: suspend_rh [ 6.781623] hub 8-0:1.0: hub_suspend [ 6.781626] usb usb8: bus auto-suspend [ 6.781629] usb usb8: suspend_rh [ 6.781642] hub 1-0:1.0: hub_suspend [ 6.781645] usb usb1: bus auto-suspend [ 6.781647] ehci_hcd 0000:00:1a.7: suspend root hub [ 7.227189] EXT3 FS on sda6, internal journal [-- Attachment #3: dmesg.raw64.xenomai --] [-- Type: text/plain, Size: 57183 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31.1-xenomai (root@crane-k) (gcc version 4.4.1 (Gentoo 4.4.1 p1.0) ) #29 SMP Fri Oct 2 10:33:28 CEST 2009 [ 0.000000] Command line: root=/dev/sda3 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cd9ffc00 (usable) [ 0.000000] BIOS-e820: 00000000cd9ffc00 - 00000000cda53c00 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cda53c00 - 00000000cda55c00 (ACPI data) [ 0.000000] BIOS-e820: 00000000cda55c00 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000128000000 (usable) [ 0.000000] DMI 2.5 present. [ 0.000000] last_pfn = 0x128000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D7FFF write-protect [ 0.000000] D8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0CDC00000 mask FFFC00000 uncachable [ 0.000000] 1 base 0CE000000 mask FFE000000 uncachable [ 0.000000] 2 base 0CDB00000 mask FFFF00000 uncachable [ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xcd9ff max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cd9ff000 [ 0.000000] 0000000000 - 00cd800000 page 2M [ 0.000000] 00cd800000 - 00cd9ff000 page 4k [ 0.000000] kernel direct mapping tables up to cd9ff000 @ 8000-e000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000128000000 [ 0.000000] 0100000000 - 0128000000 page 2M [ 0.000000] kernel direct mapping tables up to 128000000 @ c000-12000 [ 0.000000] ACPI: RSDP 00000000000fec00 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000000fc7cb 00074 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: FACP 00000000000fc8fb 000F4 (v03 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: DSDT 00000000ffe9cff8 054AD (v01 DELL dt_ex 00001000 INTL 20050624) [ 0.000000] ACPI: FACS 00000000cd9ffc00 00040 [ 0.000000] ACPI: SSDT 00000000ffea25c4 000AA (v01 DELL st_ex 00001000 INTL 20050624) [ 0.000000] ACPI: APIC 00000000000fc9ef 00092 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: BOOT 00000000000fca81 00028 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: ASF! 00000000000fcaa9 00096 (v32 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: MCFG 00000000000fcb3f 0003E (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: HPET 00000000000fcb7d 00038 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: TCPA 00000000000fcdd9 00032 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: DMAR 00000000000fce0b 00120 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: SLIC 00000000000fcbb5 00176 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0128000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 000179fe94] TEXT DATA BSS ==> [0001000000 - 000179fe94] [ 0.000000] #3 [000009a000 - 0000100000] BIOS reserved ==> [000009a000 - 0000100000] [ 0.000000] #4 [00017a0000 - 00017a01f0] BRK ==> [00017a0000 - 00017a01f0] [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #6 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710 [ 0.000000] [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00128000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009a [ 0.000000] 0: 0x00000100 -> 0x000cd9ff [ 0.000000] 0: 0x00100000 -> 0x00128000 [ 0.000000] On node 0 totalpages: 1005977 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 110 pages reserved [ 0.000000] DMA zone: 3828 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 823863 pages, LIFO batch:31 [ 0.000000] Normal zone: 2240 pages used for memmap [ 0.000000] Normal zone: 161600 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] 8 Processors exceeds NR_CPUS limit of 4 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) [ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff880028022000, static data 93792 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 989291 [ 0.000000] Kernel command line: root=/dev/sda3 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 3884988k/4849664k available (4261k kernel code, 825756k absent, 137952k reserved, 2043k data, 432k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:384 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2660.468 MHz processor. [ 0.000043] I-pipe 2.4-05: pipeline enabled. [ 0.003100] Console: colour VGA+ 80x25 [ 0.003102] console [tty0] enabled [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 8 timers in total, 4 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.93 BogoMIPS (lpj=10641872) [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU0: Thermal monitoring enabled (TM2) [ 0.004000] Performance Counters: Core2 events, Intel PMU driver. [ 0.004000] ... version: 2 [ 0.004000] ... bit width: 40 [ 0.004000] ... generic counters: 2 [ 0.004000] ... value mask: 000000ffffffffff [ 0.004000] ... max period: 000000007fffffff [ 0.004000] ... fixed-purpose counters: 3 [ 0.004000] ... counter mask: 0000000700000003 [ 0.004000] Freeing SMP alternatives: 36k freed [ 0.004000] ACPI: Core revision 20090521 [ 0.241510] Setting APIC routing to flat [ 0.241910] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.244001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.244001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.244001] ..... (found apic 0 pin 2) ... [ 0.285704] ....... works. [ 0.285797] CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.288001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5319.97 BogoMIPS (lpj=10639955) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.373204] CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.374319] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.376074] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 5320.00 BogoMIPS (lpj=10640003) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU2: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.469270] CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.470367] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.472060] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 5320.01 BogoMIPS (lpj=10640031) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU3: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.565199] CPU3: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.566297] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.568017] Brought up 4 CPUs [ 0.568130] Total of 4 processors activated (21280.93 BogoMIPS). [ 0.568318] NET: Registered protocol family 16 [ 0.572054] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.573885] ACPI: bus type pci registered [ 0.573985] PCI: Using configuration type 1 for base access [ 0.580059] bio: create slab <bio-0> at 0 [ 0.580407] ACPI: EC: Look up EC in DSDT [ 0.647768] ACPI: BIOS _OSI(Linux) query ignored [ 0.675404] ACPI: Interpreter enabled [ 0.675499] ACPI: (supports S0 S5) [ 0.675653] ACPI: Using IOAPIC for interrupt routing [ 0.780421] ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 7F 20090521 tbutils-246 [ 0.786351] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.795886] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.796049] pci 0000:00:02.0: reg 10 64bit mmio: [0xfe800000-0xfebfffff] [ 0.796054] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.796058] pci 0000:00:02.0: reg 20 io port: [0xec90-0xec97] [ 0.796085] pci 0000:00:02.1: reg 10 64bit mmio: [0xfe700000-0xfe7fffff] [ 0.796150] pci 0000:00:03.0: reg 10 64bit mmio: [0xfeda6000-0xfeda600f] [ 0.796207] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.796304] pci 0000:00:03.0: PME# disabled [ 0.796421] pci 0000:00:03.2: reg 10 io port: [0xfe80-0xfe87] [ 0.796426] pci 0000:00:03.2: reg 14 io port: [0xfe90-0xfe93] [ 0.796431] pci 0000:00:03.2: reg 18 io port: [0xfea0-0xfea7] [ 0.796435] pci 0000:00:03.2: reg 1c io port: [0xfeb0-0xfeb3] [ 0.796439] pci 0000:00:03.2: reg 20 io port: [0xfef0-0xfeff] [ 0.796480] pci 0000:00:03.3: reg 10 io port: [0xec98-0xec9f] [ 0.796485] pci 0000:00:03.3: reg 14 32bit mmio: [0xfe6d8000-0xfe6d8fff] [ 0.796601] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe6e0000-0xfe6fffff] [ 0.796606] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe6d9000-0xfe6d9fff] [ 0.796611] pci 0000:00:19.0: reg 18 io port: [0xecc0-0xecdf] [ 0.796644] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.796739] pci 0000:00:19.0: PME# disabled [ 0.796890] pci 0000:00:1a.0: reg 20 io port: [0xff20-0xff3f] [ 0.796948] pci 0000:00:1a.1: reg 20 io port: [0xff00-0xff1f] [ 0.797006] pci 0000:00:1a.2: reg 20 io port: [0xfc00-0xfc1f] [ 0.797068] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe6da000-0xfe6da3ff] [ 0.797115] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.797211] pci 0000:00:1a.7: PME# disabled [ 0.797332] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe6dc000-0xfe6dffff] [ 0.797367] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.797462] pci 0000:00:1b.0: PME# disabled [ 0.797596] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.797690] pci 0000:00:1c.0: PME# disabled [ 0.797826] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.797920] pci 0000:00:1c.1: PME# disabled [ 0.798056] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f] [ 0.798116] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f] [ 0.798175] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f] [ 0.798237] pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980000-0xff9803ff] [ 0.798284] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.798379] pci 0000:00:1d.7: PME# disabled [ 0.798617] pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07] [ 0.798622] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13] [ 0.798626] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27] [ 0.798631] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33] [ 0.798636] pci 0000:00:1f.2: reg 20 io port: [0xfec0-0xfedf] [ 0.798641] pci 0000:00:1f.2: reg 24 32bit mmio: [0xff970000-0xff9707ff] [ 0.798667] pci 0000:00:1f.2: PME# supported from D3hot [ 0.798759] pci 0000:00:1f.2: PME# disabled [ 0.798871] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe6db000-0xfe6db0ff] [ 0.798882] pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff] [ 0.798934] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe500000-0xfe5fffff] [ 0.798973] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe400000-0xfe4fffff] [ 0.799005] pci 0000:03:00.0: reg 10 32bit mmio: [0xfe3fe000-0xfe3fefff] [ 0.799045] pci 0000:03:00.0: supports D1 D2 [ 0.799047] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot [ 0.799142] pci 0000:03:00.0: PME# disabled [ 0.799260] pci 0000:03:02.0: reg 10 io port: [0xdc00-0xdcff] [ 0.799266] pci 0000:03:02.0: reg 14 32bit mmio: [0xfe3ff000-0xfe3ff0ff] [ 0.799303] pci 0000:03:02.0: supports D1 D2 [ 0.799305] pci 0000:03:02.0: PME# supported from D1 D2 D3hot D3cold [ 0.799400] pci 0000:03:02.0: PME# disabled [ 0.799527] pci 0000:00:1e.0: transparent bridge [ 0.799619] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] [ 0.799623] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe300000-0xfe3fffff] [ 0.799638] pci_bus 0000:00: on NUMA node 0 [ 0.799642] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.800308] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] [ 0.800689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [ 0.800998] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT] [ 2.253860] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 2.256377] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 2.257591] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 2.258804] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 2.260014] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 2.261342] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 2.262553] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 2.263755] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 2.264406] SCSI subsystem initialized [ 2.264406] libata version 3.00 loaded. [ 2.264406] usbcore: registered new interface driver usbfs [ 2.264406] usbcore: registered new interface driver hub [ 2.264406] usbcore: registered new device driver usb [ 2.264406] PCI: Using ACPI for IRQ routing [ 2.280018] hpet: hpet2 irq 24 for MSI [ 2.280020] hpet: hpet3 irq 25 for MSI [ 2.284057] hpet: hpet4 irq 26 for MSI [ 2.288023] hpet: hpet5 irq 27 for MSI [ 2.292014] Switched to high resolution mode on CPU 0 [ 2.294104] Switched to high resolution mode on CPU 3 [ 2.294203] Switched to high resolution mode on CPU 2 [ 2.294481] Switched to high resolution mode on CPU 1 [ 2.304008] pnp: PnP ACPI init [ 2.304106] ACPI: bus type pnp registered [ 2.356435] pnp: PnP ACPI: found 9 devices [ 2.356527] ACPI: ACPI bus type pnp unregistered [ 2.356623] system 00:01: ioport range 0x800-0x85f has been reserved [ 2.356718] system 00:01: ioport range 0xc00-0xc7f has been reserved [ 2.356813] system 00:01: ioport range 0x860-0x8ff has been reserved [ 2.362064] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 2.362157] pci 0000:00:1c.0: IO window: disabled [ 2.362251] pci 0000:00:1c.0: MEM window: 0xfe500000-0xfe5fffff [ 2.362346] pci 0000:00:1c.0: PREFETCH window: disabled [ 2.362441] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 2.362534] pci 0000:00:1c.1: IO window: disabled [ 2.362627] pci 0000:00:1c.1: MEM window: 0xfe400000-0xfe4fffff [ 2.362722] pci 0000:00:1c.1: PREFETCH window: disabled [ 2.362816] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 2.362910] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 2.363006] pci 0000:00:1e.0: MEM window: 0xfe300000-0xfe3fffff [ 2.363101] pci 0000:00:1e.0: PREFETCH window: disabled [ 2.363202] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.363299] pci 0000:00:1c.0: setting latency timer to 64 [ 2.363305] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.363401] pci 0000:00:1c.1: setting latency timer to 64 [ 2.363406] pci 0000:00:1e.0: setting latency timer to 64 [ 2.363409] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 2.363412] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 2.363414] pci_bus 0000:01: resource 1 mem: [0xfe500000-0xfe5fffff] [ 2.363416] pci_bus 0000:02: resource 1 mem: [0xfe400000-0xfe4fffff] [ 2.363418] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 2.363420] pci_bus 0000:03: resource 1 mem: [0xfe300000-0xfe3fffff] [ 2.363422] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 2.363423] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] [ 2.363435] NET: Registered protocol family 2 [ 2.363545] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.363888] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 2.365298] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.365823] TCP: Hash tables configured (established 262144 bind 65536) [ 2.365918] TCP reno registered [ 2.366090] NET: Registered protocol family 1 [ 2.366373] Simple Boot Flag at 0x7a set to 0x1 [ 2.368128] audit: initializing netlink socket (disabled) [ 2.368228] type=2000 audit(1254479680.365:1): initialized [ 2.371076] I-pipe: Domain Xenomai registered. [ 2.371256] Xenomai: hal/x86_64 started. [ 2.371363] Xenomai: scheduling class idle registered. [ 2.371454] Xenomai: scheduling class rt registered. [ 2.373676] Xenomai: real-time nucleus v2.5-rc3 (Flying In A Blue Dream) loaded. [ 2.374009] Xenomai: starting native API services. [ 2.374104] Xenomai: starting POSIX services. [ 2.374225] Xenomai: starting RTDM services. [ 2.374640] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.378881] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 2.379575] fuse init (API version 7.12) [ 2.379923] msgmni has been set to 7589 [ 2.380821] alg: No test for stdrng (krng) [ 2.381102] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.381251] io scheduler noop registered [ 2.381340] io scheduler anticipatory registered [ 2.381431] io scheduler deadline registered [ 2.381540] io scheduler cfq registered (default) [ 2.381637] pci 0000:00:02.0: Boot video device [ 2.381648] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080 [ 2.381649] pci 0000:00:1a.0: Performing full reset [ 2.381664] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0080 [ 2.381666] pci 0000:00:1a.1: Performing full reset [ 2.381680] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0080 [ 2.381681] pci 0000:00:1a.2: Performing full reset [ 2.381714] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080 [ 2.381716] pci 0000:00:1d.0: Performing full reset [ 2.381730] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0080 [ 2.381731] pci 0000:00:1d.1: Performing full reset [ 2.381745] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0080 [ 2.381747] pci 0000:00:1d.2: Performing full reset [ 2.381928] pcieport-driver 0000:00:1c.0: irq 28 for MSI/MSI-X [ 2.381936] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 2.382106] pcieport-driver 0000:00:1c.1: irq 29 for MSI/MSI-X [ 2.382113] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 2.382344] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.386370] Non-volatile memory driver v1.3 [ 2.386460] Linux agpgart interface v0.103 [ 2.386561] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset [ 2.387532] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 2.389817] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 2.390054] [drm] Initialized drm 1.1.0 20060810 [ 2.390160] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.390257] i915 0000:00:02.0: setting latency timer to 64 [ 2.403088] i915 0000:00:02.0: irq 30 for MSI/MSI-X [ 3.058611] [drm] TMDS-8: set mode 1920x1080 13 [ 3.288779] Console: switching to colour frame buffer device 240x67 [ 3.293093] [drm] fb0: inteldrmfb frame buffer device [ 3.293123] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.293228] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.548141] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.548731] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.548897] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.549020] 0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17) is a 16550A [ 3.551420] brd: module loaded [ 3.552550] loop: module loaded [ 3.552918] ahci 0000:00:1f.2: version 3.0 [ 3.552930] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.552998] ahci 0000:00:1f.2: irq 31 for MSI/MSI-X [ 3.553049] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x2f impl RAID mode [ 3.553082] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems [ 3.553109] ahci 0000:00:1f.2: setting latency timer to 64 [ 3.592051] scsi0 : ahci [ 3.592251] scsi1 : ahci [ 3.592435] scsi2 : ahci [ 3.592616] scsi3 : ahci [ 3.592799] scsi4 : ahci [ 3.592982] scsi5 : ahci [ 3.594602] ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 31 [ 3.594632] ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 31 [ 3.594661] ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 31 [ 3.594690] ata4: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970280 irq 31 [ 3.594719] ata5: DUMMY [ 3.594731] ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 31 [ 3.595077] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 3.595109] Copyright (c) 1999-2006 Intel Corporation. [ 3.595187] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 3.595216] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 3.595259] e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 3.595289] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb [ 3.595319] e1000e 0000:00:19.0: setting latency timer to 64 [ 3.595384] e1000e 0000:00:19.0: irq 32 for MSI/MSI-X [ 3.704578] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:e8:39:3c:95 [ 3.704608] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 3.704665] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: 2021ff-0ff [ 3.704749] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 [ 3.704776] Copyright (c) 2007-2009 Intel Corporation. [ 3.704854] Intel(R) Virtual Function Network Driver - version 1.0.0-k0 [ 3.704880] Copyright (c) 2009 Intel Corporation. [ 3.704970] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 3.704996] 8139cp 0000:03:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 3.705086] tun: Universal TUN/TAP device driver, 1.6 [ 3.705107] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 3.706148] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.707010] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96 [ 3.707024] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 3.707919] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 3.707922] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 3.708851] drivers/usb/core/inode.c: creating file 'devices' [ 3.708854] drivers/usb/core/inode.c: creating file '001' [ 3.708925] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 3.709853] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 3.709856] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 3.709870] ehci_hcd 0000:00:1a.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT [ 3.713744] ehci_hcd 0000:00:1a.7: debug port 1 [ 3.714667] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 3.714669] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 3.714679] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe6da000 [ 3.715615] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 3.719503] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 3.728017] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 3.729033] usb usb1: default language 0x0409 [ 3.729043] usb usb1: udev 1, busnum 1, minor = 0 [ 3.729045] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.730029] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.731015] usb usb1: Product: EHCI Host Controller [ 3.732025] usb usb1: Manufacturer: Linux 2.6.31.1-xenomai ehci_hcd [ 3.733045] usb usb1: SerialNumber: 0000:00:1a.7 [ 3.734110] usb usb1: uevent [ 3.734171] usb usb1: usb_probe_device [ 3.734173] usb usb1: configuration #1 chosen from 1 choice [ 3.735219] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 3.735230] usb 1-0:1.0: uevent [ 3.735289] hub 1-0:1.0: usb_probe_interface [ 3.735291] hub 1-0:1.0: usb_probe_interface - got id [ 3.735292] hub 1-0:1.0: USB hub found [ 3.736361] hub 1-0:1.0: 6 ports detected [ 3.737443] hub 1-0:1.0: standalone hub [ 3.737445] hub 1-0:1.0: no power switching (usb 1.0) [ 3.737446] hub 1-0:1.0: individual port over-current protection [ 3.737448] hub 1-0:1.0: power on to power good time: 20ms [ 3.737451] hub 1-0:1.0: local power source is good [ 3.737453] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 3.737478] drivers/usb/core/inode.c: creating file '001' [ 3.737498] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.738613] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.738615] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.739742] drivers/usb/core/inode.c: creating file '002' [ 3.739817] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 3.740958] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 3.740961] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 3.740973] ehci_hcd 0000:00:1d.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT [ 3.744869] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.746000] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 3.746002] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 3.746011] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000 [ 3.747126] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 3.750992] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 3.760017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.761179] usb usb2: default language 0x0409 [ 3.761185] usb usb2: udev 1, busnum 2, minor = 128 [ 3.761187] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.762309] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.763414] usb usb2: Product: EHCI Host Controller [ 3.764546] usb usb2: Manufacturer: Linux 2.6.31.1-xenomai ehci_hcd [ 3.765658] usb usb2: SerialNumber: 0000:00:1d.7 [ 3.766776] usb usb2: uevent [ 3.766838] usb usb2: usb_probe_device [ 3.766840] usb usb2: configuration #1 chosen from 1 choice [ 3.767930] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 3.767944] usb 2-0:1.0: uevent [ 3.768007] hub 2-0:1.0: usb_probe_interface [ 3.768008] hub 2-0:1.0: usb_probe_interface - got id [ 3.768010] hub 2-0:1.0: USB hub found [ 3.769091] hub 2-0:1.0: 6 ports detected [ 3.770178] hub 2-0:1.0: standalone hub [ 3.770179] hub 2-0:1.0: no power switching (usb 1.0) [ 3.770181] hub 2-0:1.0: individual port over-current protection [ 3.770182] hub 2-0:1.0: power on to power good time: 20ms [ 3.770186] hub 2-0:1.0: local power source is good [ 3.770187] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 3.770212] drivers/usb/core/inode.c: creating file '001' [ 3.770286] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.771371] ohci_hcd: block sizes: ed 80 td 96 [ 3.771434] uhci_hcd: USB Universal Host Controller Interface driver [ 3.772610] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.773703] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 3.773705] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.774793] drivers/usb/core/inode.c: creating file '003' [ 3.774867] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 3.775960] uhci_hcd 0000:00:1a.0: detected 2 ports [ 3.777067] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 3.777068] uhci_hcd 0000:00:1a.0: Performing full reset [ 3.777080] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 3.777090] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20 [ 3.778234] usb usb3: default language 0x0409 [ 3.778240] usb usb3: udev 1, busnum 3, minor = 256 [ 3.778241] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.779365] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.780518] usb usb3: Product: UHCI Host Controller [ 3.781655] usb usb3: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd [ 3.782800] usb usb3: SerialNumber: 0000:00:1a.0 [ 3.783976] usb usb3: uevent [ 3.784032] usb usb3: usb_probe_device [ 3.784034] usb usb3: configuration #1 chosen from 1 choice [ 3.785202] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 3.785213] usb 3-0:1.0: uevent [ 3.785267] hub 3-0:1.0: usb_probe_interface [ 3.785269] hub 3-0:1.0: usb_probe_interface - got id [ 3.785270] hub 3-0:1.0: USB hub found [ 3.786439] hub 3-0:1.0: 2 ports detected [ 3.787580] hub 3-0:1.0: standalone hub [ 3.787581] hub 3-0:1.0: no power switching (usb 1.0) [ 3.787583] hub 3-0:1.0: individual port over-current protection [ 3.787584] hub 3-0:1.0: power on to power good time: 2ms [ 3.787588] hub 3-0:1.0: local power source is good [ 3.787589] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 3.787600] drivers/usb/core/inode.c: creating file '001' [ 3.787624] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.788791] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 3.788794] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.789965] drivers/usb/core/inode.c: creating file '004' [ 3.790042] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 3.791192] uhci_hcd 0000:00:1a.1: detected 2 ports [ 3.792340] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 3.792341] uhci_hcd 0000:00:1a.1: Performing full reset [ 3.792353] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 3.792363] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00 [ 3.793547] usb usb4: default language 0x0409 [ 3.793552] usb usb4: udev 1, busnum 4, minor = 384 [ 3.793554] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.794691] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.795821] usb usb4: Product: UHCI Host Controller [ 3.796963] usb usb4: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd [ 3.798110] usb usb4: SerialNumber: 0000:00:1a.1 [ 3.799262] usb usb4: uevent [ 3.799322] usb usb4: usb_probe_device [ 3.799324] usb usb4: configuration #1 chosen from 1 choice [ 3.800457] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 3.800469] usb 4-0:1.0: uevent [ 3.800527] hub 4-0:1.0: usb_probe_interface [ 3.800529] hub 4-0:1.0: usb_probe_interface - got id [ 3.800530] hub 4-0:1.0: USB hub found [ 3.801660] hub 4-0:1.0: 2 ports detected [ 3.802781] hub 4-0:1.0: standalone hub [ 3.802782] hub 4-0:1.0: no power switching (usb 1.0) [ 3.802783] hub 4-0:1.0: individual port over-current protection [ 3.802785] hub 4-0:1.0: power on to power good time: 2ms [ 3.802788] hub 4-0:1.0: local power source is good [ 3.802790] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 3.802801] drivers/usb/core/inode.c: creating file '001' [ 3.802822] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 3.803945] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 3.803947] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 3.805059] drivers/usb/core/inode.c: creating file '005' [ 3.805128] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 3.806230] uhci_hcd 0000:00:1a.2: detected 2 ports [ 3.807312] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 3.807314] uhci_hcd 0000:00:1a.2: Performing full reset [ 3.807326] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 3.807330] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00 [ 3.808438] usb usb5: default language 0x0409 [ 3.808443] usb usb5: udev 1, busnum 5, minor = 512 [ 3.808445] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.809534] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.810610] usb usb5: Product: UHCI Host Controller [ 3.811701] usb usb5: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd [ 3.812795] usb usb5: SerialNumber: 0000:00:1a.2 [ 3.813908] usb usb5: uevent [ 3.813965] usb usb5: usb_probe_device [ 3.813967] usb usb5: configuration #1 chosen from 1 choice [ 3.815053] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 3.815065] usb 5-0:1.0: uevent [ 3.815122] hub 5-0:1.0: usb_probe_interface [ 3.815124] hub 5-0:1.0: usb_probe_interface - got id [ 3.815125] hub 5-0:1.0: USB hub found [ 3.816212] hub 5-0:1.0: 2 ports detected [ 3.817276] hub 5-0:1.0: standalone hub [ 3.817278] hub 5-0:1.0: no power switching (usb 1.0) [ 3.817279] hub 5-0:1.0: individual port over-current protection [ 3.817281] hub 5-0:1.0: power on to power good time: 2ms [ 3.817284] hub 5-0:1.0: local power source is good [ 3.817286] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 3.817297] drivers/usb/core/inode.c: creating file '001' [ 3.817318] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.818414] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.818417] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.819494] drivers/usb/core/inode.c: creating file '006' [ 3.819570] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 3.820663] uhci_hcd 0000:00:1d.0: detected 2 ports [ 3.821754] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 3.821755] uhci_hcd 0000:00:1d.0: Performing full reset [ 3.821767] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 3.821771] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80 [ 3.822865] usb usb6: default language 0x0409 [ 3.822870] usb usb6: udev 1, busnum 6, minor = 640 [ 3.822872] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.823978] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.825076] usb usb6: Product: UHCI Host Controller [ 3.826166] usb usb6: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd [ 3.827248] usb usb6: SerialNumber: 0000:00:1d.0 [ 3.828366] usb usb6: uevent [ 3.828422] usb usb6: usb_probe_device [ 3.828424] usb usb6: configuration #1 chosen from 1 choice [ 3.829513] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 3.829524] usb 6-0:1.0: uevent [ 3.829575] hub 6-0:1.0: usb_probe_interface [ 3.829577] hub 6-0:1.0: usb_probe_interface - got id [ 3.829578] hub 6-0:1.0: USB hub found [ 3.830667] hub 6-0:1.0: 2 ports detected [ 3.831736] hub 6-0:1.0: standalone hub [ 3.831737] hub 6-0:1.0: no power switching (usb 1.0) [ 3.831738] hub 6-0:1.0: individual port over-current protection [ 3.831740] hub 6-0:1.0: power on to power good time: 2ms [ 3.831743] hub 6-0:1.0: local power source is good [ 3.831745] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 3.831758] drivers/usb/core/inode.c: creating file '001' [ 3.831779] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.832884] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.832886] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.833978] drivers/usb/core/inode.c: creating file '007' [ 3.834023] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT [ 3.834025] hub 1-0:1.0: port 5: status 0501 change 0001 [ 3.834032] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT [ 3.834035] hub 1-0:1.0: port 6: status 0501 change 0001 [ 3.834043] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 3.835134] uhci_hcd 0000:00:1d.1: detected 2 ports [ 3.836225] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 3.836227] uhci_hcd 0000:00:1d.1: Performing full reset [ 3.836239] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 3.836243] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60 [ 3.837365] usb usb7: default language 0x0409 [ 3.837371] usb usb7: udev 1, busnum 7, minor = 768 [ 3.837372] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.838466] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.839562] usb usb7: Product: UHCI Host Controller [ 3.840666] usb usb7: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd [ 3.841769] usb usb7: SerialNumber: 0000:00:1d.1 [ 3.842881] usb usb7: uevent [ 3.842941] usb usb7: usb_probe_device [ 3.842943] usb usb7: configuration #1 chosen from 1 choice [ 3.844036] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 3.844047] usb 7-0:1.0: uevent [ 3.844104] hub 7-0:1.0: usb_probe_interface [ 3.844105] hub 7-0:1.0: usb_probe_interface - got id [ 3.844107] hub 7-0:1.0: USB hub found [ 3.845192] hub 7-0:1.0: 2 ports detected [ 3.846274] hub 7-0:1.0: standalone hub [ 3.846275] hub 7-0:1.0: no power switching (usb 1.0) [ 3.846276] hub 7-0:1.0: individual port over-current protection [ 3.846278] hub 7-0:1.0: power on to power good time: 2ms [ 3.846281] hub 7-0:1.0: local power source is good [ 3.846283] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 3.846294] drivers/usb/core/inode.c: creating file '001' [ 3.846317] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.847416] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.847419] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.848522] drivers/usb/core/inode.c: creating file '008' [ 3.848590] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 3.849696] uhci_hcd 0000:00:1d.2: detected 2 ports [ 3.850780] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 3.850782] uhci_hcd 0000:00:1d.2: Performing full reset [ 3.850793] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 3.850803] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 3.851932] usb usb8: default language 0x0409 [ 3.851937] usb usb8: udev 1, busnum 8, minor = 896 [ 3.851939] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.853049] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.854167] usb usb8: Product: UHCI Host Controller [ 3.855257] usb usb8: Manufacturer: Linux 2.6.31.1-xenomai uhci_hcd [ 3.856367] usb usb8: SerialNumber: 0000:00:1d.2 [ 3.857478] usb usb8: uevent [ 3.857541] usb usb8: usb_probe_device [ 3.857543] usb usb8: configuration #1 chosen from 1 choice [ 3.858632] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 3.858646] usb 8-0:1.0: uevent [ 3.858690] hub 8-0:1.0: usb_probe_interface [ 3.858692] hub 8-0:1.0: usb_probe_interface - got id [ 3.858693] hub 8-0:1.0: USB hub found [ 3.859775] hub 8-0:1.0: 2 ports detected [ 3.860876] hub 8-0:1.0: standalone hub [ 3.860877] hub 8-0:1.0: no power switching (usb 1.0) [ 3.860879] hub 8-0:1.0: individual port over-current protection [ 3.860880] hub 8-0:1.0: power on to power good time: 2ms [ 3.860884] hub 8-0:1.0: local power source is good [ 3.860885] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 3.860897] drivers/usb/core/inode.c: creating file '001' [ 3.860978] usbcore: registered new interface driver usblp [ 3.862073] Initializing USB Mass Storage driver... [ 3.863232] usbcore: registered new interface driver usb-storage [ 3.864328] USB Mass Storage support registered. [ 3.865487] usbcore: registered new interface driver libusual [ 3.866794] PNP: No PS/2 controller found. Probing ports directly. [ 3.870483] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.871607] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.872035] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 3.872838] mice: PS/2 mouse device common for all mice [ 3.874129] rtc_cmos 00:05: RTC can wake from S4 [ 3.875286] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 3.876402] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs [ 3.877584] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.878810] cpuidle: using governor ladder [ 3.879910] cpuidle: using governor menu [ 3.882575] usbcore: registered new interface driver hiddev [ 3.883723] usbcore: registered new interface driver usbhid [ 3.884825] usbhid: v2.6:USB HID core driver [ 3.885941] Netfilter messages via NETLINK v0.30. [ 3.887023] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3.888031] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.888314] ctnetlink v0.93: registering with nfnetlink. [ 3.889481] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.890584] TCP cubic registered [ 3.891658] Initializing XFRM netlink socket [ 3.893030] NET: Registered protocol family 10 [ 3.894263] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.895349] IPv6 over IPv4 tunneling driver [ 3.896596] NET: Registered protocol family 17 [ 3.897939] RPC: Registered udp transport module. [ 3.899006] RPC: Registered tcp transport module. [ 3.904021] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.913519] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.914633] ata4: SATA link down (SStatus 4 SControl 300) [ 3.915286] ata2.00: ATAPI: PLDS DVD+/-RW DH-16AAS, JD12, max UDMA/100, ATAPI AN [ 3.916015] uhci_hcd 0000:00:1a.2: port 1 portsc 008a,00 [ 3.916025] uhci_hcd 0000:00:1a.2: port 2 portsc 008a,00 [ 3.916813] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.917925] ata2.00: configured for UDMA/100 [ 3.917927] ata6: SATA link down (SStatus 0 SControl 300) [ 3.917939] ata3: SATA link down (SStatus 4 SControl 300) [ 3.932019] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.936018] hub 1-0:1.0: state 7 ports 6 chg 0060 evt 0000 [ 3.936027] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s [ 3.944779] ata1.00: ATA-8: ST3500418AS, CC44, max UDMA/133 [ 3.945917] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.986320] ata1.00: configured for UDMA/133 [ 3.987431] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4 [ 3.988239] ehci_hcd 0000:00:1a.7: port 5 full speed --> companion [ 3.988242] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT [ 3.988245] hub 1-0:1.0: port 5 not reset yet, waiting 50ms [ 3.988524] ata1: irq_stat 0x00400040, connection status changed [ 3.989609] ata1: hard resetting link [ 4.044013] ehci_hcd 0000:00:1a.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC [ 4.044031] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 4.044036] ehci_hcd 0000:00:1a.7: port 6 low speed --> companion [ 4.100013] ehci_hcd 0000:00:1a.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC [ 4.100027] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.100032] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 4.100035] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040 [ 4.100041] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 4.100048] uhci_hcd 0000:00:1a.2: port 1 portsc 0093,00 [ 4.100054] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 4.228015] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 4.340011] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 4.476014] usb 5-1: ep0 maxpacket = 8 [ 4.513332] usb 5-1: skipped 1 descriptor after interface [ 4.513335] usb 5-1: skipped 1 descriptor after interface [ 4.518326] usb 5-1: default language 0x0409 [ 4.537321] usb 5-1: udev 2, busnum 5, minor = 513 [ 4.537323] usb 5-1: New USB device found, idVendor=413c, idProduct=2101 [ 4.538462] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.539575] usb 5-1: Product: Dell Smart Card Reader Keyboard [ 4.540689] usb 5-1: Manufacturer: Dell [ 4.541808] usb 5-1: uevent [ 4.541872] usb 5-1: usb_probe_device [ 4.541874] usb 5-1: configuration #1 chosen from 1 choice [ 4.545323] usb 5-1: adding 5-1:1.0 (config #1, interface 0) [ 4.545339] usb 5-1:1.0: uevent [ 4.545389] usbhid 5-1:1.0: usb_probe_interface [ 4.545392] usbhid 5-1:1.0: usb_probe_interface - got id [ 4.550599] input: Dell Dell Smart Card Reader Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input0 [ 4.551725] uhci_hcd 0000:00:1a.2: reserve dev 2 ep81-INT, period 16, phase 8, 17 us [ 4.551852] generic-usb 0003:413C:2101.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell Dell Smart Card Reader Keyboard] on usb-0000:00:1a.2-1/input0 [ 4.553049] usb 5-1: adding 5-1:1.1 (config #1, interface 1) [ 4.553060] usb 5-1:1.1: uevent [ 4.553144] drivers/usb/core/inode.c: creating file '002' [ 4.553159] uhci_hcd 0000:00:1a.2: port 2 portsc 01a3,00 [ 4.553165] hub 5-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s [ 4.680016] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301 [ 4.712018] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.779485] ata1.00: configured for UDMA/133 [ 4.780693] ata1: EH complete [ 4.781927] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC44 PQ: 0 ANSI: 5 [ 4.783470] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 4.784689] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.785930] sd 0:0:0:0: [sda] Write Protect is off [ 4.787099] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.787146] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.788003] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DH-16AAS JD12 PQ: 0 ANSI: 5 [ 4.789699] sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.796096] Uniform CD-ROM driver Revision: 3.20 [ 4.797336] usb 5-2: new low speed USB device using uhci_hcd and address 3 [ 4.798663] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.798788] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.801937] sda1 sda2 sda3 sda4 < sda5 sda6 > [ 4.848391] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.868010] usb usb3: suspend_rh (auto-stop) [ 4.868028] usb usb4: suspend_rh (auto-stop) [ 4.868046] usb usb6: suspend_rh (auto-stop) [ 4.868063] usb usb7: suspend_rh (auto-stop) [ 4.868081] usb usb8: suspend_rh (auto-stop) [ 4.902432] kjournald starting. Commit interval 5 seconds [ 4.902449] EXT3-fs: mounted filesystem with writeback data mode. [ 4.902458] VFS: Mounted root (ext3 filesystem) readonly on device 8:3. [ 4.906150] Freeing unused kernel memory: 432k freed [ 4.954254] usb 5-2: skipped 1 descriptor after interface [ 4.959249] usb 5-2: default language 0x0409 [ 4.968246] usb 5-2: udev 3, busnum 5, minor = 514 [ 4.968249] usb 5-2: New USB device found, idVendor=0461, idProduct=4d51 [ 4.969542] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.970795] usb 5-2: Product: DELL Laser Mouse [ 4.972071] usb 5-2: uevent [ 4.972146] usb 5-2: usb_probe_device [ 4.972148] usb 5-2: configuration #1 chosen from 1 choice [ 4.976249] usb 5-2: adding 5-2:1.0 (config #1, interface 0) [ 4.976269] usb 5-2:1.0: uevent [ 4.976315] usbhid 5-2:1.0: usb_probe_interface [ 4.976318] usbhid 5-2:1.0: usb_probe_interface - got id [ 4.990470] input: DELL Laser Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input1 [ 4.991833] generic-usb 0003:0461:4D51.0002: input,hidraw1: USB HID v1.11 Mouse [DELL Laser Mouse] on usb-0000:00:1a.2-2/input0 [ 4.993157] drivers/usb/core/inode.c: creating file '003' [ 4.993175] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 6.762239] udev: starting version 141 [ 6.775027] usb usb3: uevent [ 6.775042] usb 3-0:1.0: uevent [ 6.775076] usb usb4: uevent [ 6.775088] usb 4-0:1.0: uevent [ 6.775123] usb usb5: uevent [ 6.775136] usb 5-0:1.0: uevent [ 6.775151] usb 5-1: uevent [ 6.775164] usb 5-1:1.0: uevent [ 6.775238] usb 5-1:1.1: uevent [ 6.775252] usb 5-2: uevent [ 6.775264] usb 5-2:1.0: uevent [ 6.775363] usb usb1: uevent [ 6.775377] usb 1-0:1.0: uevent [ 6.775496] usb usb6: uevent [ 6.775508] usb 6-0:1.0: uevent [ 6.775544] usb usb7: uevent [ 6.775556] usb 7-0:1.0: uevent [ 6.775591] usb usb8: uevent [ 6.775603] usb 8-0:1.0: uevent [ 6.775637] usb usb2: uevent [ 6.775649] usb 2-0:1.0: uevent [ 6.781524] hub 2-0:1.0: hub_suspend [ 6.781531] usb usb2: bus auto-suspend [ 6.781533] ehci_hcd 0000:00:1d.7: suspend root hub [ 6.781552] hub 3-0:1.0: hub_suspend [ 6.781555] usb usb3: bus auto-suspend [ 6.781557] usb usb3: suspend_rh [ 6.781571] hub 4-0:1.0: hub_suspend [ 6.781574] usb usb4: bus auto-suspend [ 6.781575] usb usb4: suspend_rh [ 6.781588] hub 6-0:1.0: hub_suspend [ 6.781591] usb usb6: bus auto-suspend [ 6.781592] usb usb6: suspend_rh [ 6.781605] hub 7-0:1.0: hub_suspend [ 6.781608] usb usb7: bus auto-suspend [ 6.781609] usb usb7: suspend_rh [ 6.781621] hub 8-0:1.0: hub_suspend [ 6.781624] usb usb8: bus auto-suspend [ 6.781625] usb usb8: suspend_rh [ 6.781638] hub 1-0:1.0: hub_suspend [ 6.781640] usb usb1: bus auto-suspend [ 6.781642] ehci_hcd 0000:00:1a.7: suspend root hub [ 6.881755] usb 5-1:1.0: uevent [ 6.881845] usb 5-1: uevent [ 6.884484] usb 5-2:1.0: uevent [ 6.884563] usb 5-2: uevent [ 6.886904] usb 5-2:1.0: uevent [ 6.886968] usb 5-2: uevent [ 7.008859] 8139too Fast Ethernet driver 0.9.28 [ 7.008894] 8139too 0000:03:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 7.009469] eth1: RealTek RTL8139 at 0xdc00, 00:1f:1f:14:69:6c, IRQ 18 [ 8.009624] EXT3 FS on sda3, internal journal [ 8.644175] kjournald starting. Commit interval 5 seconds [ 8.644390] EXT3 FS on sda5, internal journal [ 8.644395] EXT3-fs: mounted filesystem with writeback data mode. [ 8.750226] Unable to find swap-space signature [ 13.452686] e1000e 0000:00:19.0: irq 32 for MSI/MSI-X [ 13.504041] e1000e 0000:00:19.0: irq 32 for MSI/MSI-X [ 13.504614] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.084755] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 15.084758] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 15.085272] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 17.720647] eth1: link down [ 17.721166] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 24.162231] usb usb3: uevent [ 24.162271] usb 3-0:1.0: uevent [ 24.162363] usb usb4: uevent [ 24.162400] usb 4-0:1.0: uevent [ 24.162503] usb usb5: uevent [ 24.162541] usb 5-0:1.0: uevent [ 24.162575] usb 5-1: uevent [ 24.162613] usb 5-1:1.0: uevent [ 24.162817] usb 5-1:1.1: uevent [ 24.162851] usb 5-2: uevent [ 24.162912] usb 5-2:1.0: uevent [ 24.163219] usb usb1: uevent [ 24.163269] usb 1-0:1.0: uevent [ 24.163551] usb usb6: uevent [ 24.163589] usb 6-0:1.0: uevent [ 24.163680] usb usb7: uevent [ 24.163728] usb 7-0:1.0: uevent [ 24.163819] usb usb8: uevent [ 24.163856] usb 8-0:1.0: uevent [ 24.163946] usb usb2: uevent [ 24.163983] usb 2-0:1.0: uevent [ 25.908006] eth0: no IPv6 routers present [ 27.238160] svc: failed to register lockdv1 RPC service (errno 97). [ 27.238892] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 27.244367] NFSD: starting 90-second grace period [ 30.565033] uhci_hcd 0000:00:1a.2: reserve dev 3 ep81-INT, period 8, phase 4, 99 us [ 31.541577] uhci_hcd 0000:00:1a.2: release dev 3 ep81-INT, period 8, phase 4, 99 us ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [Xenomai-help] Freeze on SMP x86-64 2009-10-02 13:22 ` Roman Pisl @ 2009-10-02 13:25 ` Gilles Chanteperdrix 2009-10-02 13:34 ` Philippe Gerum 2009-10-03 16:01 ` Jan Kiszka 2 siblings, 0 replies; 19+ messages in thread From: Gilles Chanteperdrix @ 2009-10-02 13:25 UTC (permalink / raw) To: Roman Pisl; +Cc: xenomai Roman Pisl wrote: > On 2.10.2009 14:39, Gilles Chanteperdrix wrote: >> Roman Pisl wrote: >>> Hello, >>> I just tried x86-64 SMP Linux/Xenomai on my workstation (Intel Core2 >>> Quad) but it freezes immediately after latency test or clocktest is >>> started. It freezes even during the boot, when Xenomai debbuging is >>> enabled. >>> >>> The same kernel binary runs seamlessly in KVM on the same machine. >>> >>> When I completely disable ACPI, the kernel recognizes only one CPU and >>> the latency test works. >>> >>> The same configuration but for 32bit x86 also runs without freeze. >>> >>> Do you have any ideas? >> Yes. As we repeated many times. >> Tell us the versions of Xenomai and of the I-pipe patch you use. >> Send us your .config >> Manage to get the kernel console output (using a serial cable connected >> to another PC, or the netconsole, some people even used to send us >> photos about kernel crashes). >> > > I send dmesg output for both 32 and 64 bit. Unfortunately it just > freezes with no kernel panic output. When Xenomai debugging is enabled, > the kernel freezes after Xenomai is initialized (last message: Xenomai: > starting RTDM services). > The .config please. -- Gilles. ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [Xenomai-help] Freeze on SMP x86-64 2009-10-02 13:22 ` Roman Pisl 2009-10-02 13:25 ` Gilles Chanteperdrix @ 2009-10-02 13:34 ` Philippe Gerum 2009-10-02 13:36 ` Philippe Gerum 2009-10-03 16:01 ` Jan Kiszka 2 siblings, 1 reply; 19+ messages in thread From: Philippe Gerum @ 2009-10-02 13:34 UTC (permalink / raw) To: Roman Pisl; +Cc: xenomai On Fri, 2009-10-02 at 15:22 +0200, Roman Pisl wrote: > On 2.10.2009 14:39, Gilles Chanteperdrix wrote: > > Roman Pisl wrote: > >> Hello, > >> I just tried x86-64 SMP Linux/Xenomai on my workstation (Intel Core2 > >> Quad) but it freezes immediately after latency test or clocktest is > >> started. It freezes even during the boot, when Xenomai debbuging is > >> enabled. > >> > >> The same kernel binary runs seamlessly in KVM on the same machine. > >> > >> When I completely disable ACPI, the kernel recognizes only one CPU and > >> the latency test works. > >> > >> The same configuration but for 32bit x86 also runs without freeze. > >> > >> Do you have any ideas? > > > > Yes. As we repeated many times. > > Tell us the versions of Xenomai and of the I-pipe patch you use. > > Send us your .config > > Manage to get the kernel console output (using a serial cable connected > > to another PC, or the netconsole, some people even used to send us > > photos about kernel crashes). > > > > I send dmesg output for both 32 and 64 bit. Unfortunately it just > freezes with no kernel panic output. When Xenomai debugging is enabled, > the kernel freezes after Xenomai is initialized (last message: Xenomai: > starting RTDM services). To dig this issue further, try disabling all Xenomai skins (CONFIG_XENO_SKIN_NATIVE, _RTDM, _POSIX), only keeping the real-time nucleus in. The klog should say after reboot: [ 2.371256] Xenomai: hal/x86_64 started. [ 2.371363] Xenomai: scheduling class idle registered. [ 2.371454] Xenomai: scheduling class rt registered. [ 2.373676] Xenomai: real-time nucleus v2.5-rc3 (Flying In A Blue Dream) loaded. without any further Xenomai message. If that still does not work, try disabling CONFIG_XENOMAI entirely, only keeping the interrupt pipeline active. This way we may better understand which software stack is causing issue. > _______________________________________________ > Xenomai-help mailing list > Xenomai-help@domain.hid > https://mail.gna.org/listinfo/xenomai-help -- Philippe. ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [Xenomai-help] Freeze on SMP x86-64 2009-10-02 13:34 ` Philippe Gerum @ 2009-10-02 13:36 ` Philippe Gerum 0 siblings, 0 replies; 19+ messages in thread From: Philippe Gerum @ 2009-10-02 13:36 UTC (permalink / raw) To: Roman Pisl; +Cc: xenomai On Fri, 2009-10-02 at 15:34 +0200, Philippe Gerum wrote: > On Fri, 2009-10-02 at 15:22 +0200, Roman Pisl wrote: > > On 2.10.2009 14:39, Gilles Chanteperdrix wrote: > > > Roman Pisl wrote: > > >> Hello, > > >> I just tried x86-64 SMP Linux/Xenomai on my workstation (Intel Core2 > > >> Quad) but it freezes immediately after latency test or clocktest is > > >> started. It freezes even during the boot, when Xenomai debbuging is > > >> enabled. > > >> > > >> The same kernel binary runs seamlessly in KVM on the same machine. > > >> > > >> When I completely disable ACPI, the kernel recognizes only one CPU and > > >> the latency test works. > > >> > > >> The same configuration but for 32bit x86 also runs without freeze. > > >> > > >> Do you have any ideas? > > > > > > Yes. As we repeated many times. > > > Tell us the versions of Xenomai and of the I-pipe patch you use. > > > Send us your .config > > > Manage to get the kernel console output (using a serial cable connected > > > to another PC, or the netconsole, some people even used to send us > > > photos about kernel crashes). > > > > > > > I send dmesg output for both 32 and 64 bit. Unfortunately it just > > freezes with no kernel panic output. When Xenomai debugging is enabled, > > the kernel freezes after Xenomai is initialized (last message: Xenomai: > > starting RTDM services). > > To dig this issue further, try disabling all Xenomai skins > (CONFIG_XENO_SKIN_NATIVE, _RTDM, _POSIX), only keeping the real-time > nucleus in. The klog should say after reboot: > > [ 2.371256] Xenomai: hal/x86_64 started. > [ 2.371363] Xenomai: scheduling class idle registered. > [ 2.371454] Xenomai: scheduling class rt registered. > [ 2.373676] Xenomai: real-time nucleus v2.5-rc3 (Flying In A Blue > Dream) loaded. > > without any further Xenomai message. > > If that still does not work, try disabling CONFIG_XENOMAI entirely, only > keeping the interrupt pipeline active. This way we may better understand > which software stack is causing issue. Forget about this, I misread your message. > > > _______________________________________________ > > Xenomai-help mailing list > > Xenomai-help@domain.hid > > https://mail.gna.org/listinfo/xenomai-help -- Philippe. ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [Xenomai-help] Freeze on SMP x86-64 2009-10-02 13:22 ` Roman Pisl 2009-10-02 13:25 ` Gilles Chanteperdrix 2009-10-02 13:34 ` Philippe Gerum @ 2009-10-03 16:01 ` Jan Kiszka [not found] ` <4AC9E655.5090006@domain.hid> 2 siblings, 1 reply; 19+ messages in thread From: Jan Kiszka @ 2009-10-03 16:01 UTC (permalink / raw) To: Roman Pisl; +Cc: xenomai [-- Attachment #1: Type: text/plain, Size: 2526 bytes --] Roman Pisl wrote: > On 2.10.2009 14:39, Gilles Chanteperdrix wrote: >> Roman Pisl wrote: >>> Hello, >>> I just tried x86-64 SMP Linux/Xenomai on my workstation (Intel Core2 >>> Quad) but it freezes immediately after latency test or clocktest is >>> started. It freezes even during the boot, when Xenomai debbuging is >>> enabled. >>> >>> The same kernel binary runs seamlessly in KVM on the same machine. >>> >>> When I completely disable ACPI, the kernel recognizes only one CPU and >>> the latency test works. >>> >>> The same configuration but for 32bit x86 also runs without freeze. >>> >>> Do you have any ideas? >> >> Yes. As we repeated many times. >> Tell us the versions of Xenomai and of the I-pipe patch you use. >> Send us your .config >> Manage to get the kernel console output (using a serial cable connected >> to another PC, or the netconsole, some people even used to send us >> photos about kernel crashes). >> > > I send dmesg output for both 32 and 64 bit. Unfortunately it just > freezes with no kernel panic output. When Xenomai debugging is enabled, > the kernel freezes after Xenomai is initialized (last message: Xenomai: > starting RTDM services). Does this patch make any difference? Jan -------> x86: Fix irq_move_cleanup virtualization Call the right function and avoid a recursion when this interrupt triggers. Signed-off-by: Jan Kiszka <jan.kiszka@domain.hid> --- arch/x86/kernel/ipipe.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/x86/kernel/ipipe.c b/arch/x86/kernel/ipipe.c index b8f9139..d4789c8 100644 --- a/arch/x86/kernel/ipipe.c +++ b/arch/x86/kernel/ipipe.c @@ -290,7 +290,7 @@ void __init __ipipe_enable_pipeline(void) ipipe_virtualize_irq(ipipe_root_domain, ipipe_apic_vector_irq(IRQ_MOVE_CLEANUP_VECTOR), - (ipipe_irq_handler_t)&irq_move_cleanup_interrupt, + (ipipe_irq_handler_t)&smp_irq_move_cleanup_interrupt, NULL, &__ipipe_ack_apic, IPIPE_STDROOT_MASK); -------------- PS: ... > [ 0.005664] Checking 'hlt' instruction... OK. > [ 0.020484] ACPI: Core revision 20090521 > [ 0.259694] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.260001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC This is an ipipe triggered oddity (if not bug), too. I'm seeing it over kvm as well, and it goes away when disabling ipipe. Does it ring some bell? Otherwise I will check this later. [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 257 bytes --] ^ permalink raw reply related [flat|nested] 19+ messages in thread
[parent not found: <4AC9E655.5090006@domain.hid>]
[parent not found: <4AC9ED6B.4050004@domain.hid>]
[parent not found: <4AC9F4FA.5070409@domain.hid>]
[parent not found: <4ACA013F.8040602@domain.hid>]
* Re: [Xenomai-help] Freeze on SMP x86-64 [not found] ` <4ACA013F.8040602@domain.hid> @ 2009-10-06 13:18 ` Roman Pisl 2009-10-06 13:56 ` Jan Kiszka 0 siblings, 1 reply; 19+ messages in thread From: Roman Pisl @ 2009-10-06 13:18 UTC (permalink / raw) To: Jan Kiszka; +Cc: xenomai [-- Attachment #1: Type: text/plain, Size: 400 bytes --] ... > > Is there a chance to grab the panic log via serial line? The first of > your two screenshots indicate that there might have happened something > interesting before the NMI triggered, but it's scrolled out of sight. > > Jan > Hello, here I send kernel panic (triggered by rt_task_sleep and latency test) grabbed via serial line. I'm ready to help with resolving this issue. Regards Roman [-- Attachment #2: panic.latency --] [-- Type: text/plain, Size: 39494 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31.1-xenomai-i2.4-06 (root@domain.hid) (gcc version 4.4.1 (Gentoo 4.4.1 p1.0) ) #3 SMP Tue Oct 6 14:45:26 CEST 2009 [ 0.000000] Command line: root=/dev/sda3 nmi_watchdog=2 console=ttyS0,115200 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cd9ffc00 (usable) [ 0.000000] BIOS-e820: 00000000cd9ffc00 - 00000000cda53c00 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cda53c00 - 00000000cda55c00 (ACPI data) [ 0.000000] BIOS-e820: 00000000cda55c00 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000128000000 (usable) [ 0.000000] DMI 2.5 present. [ 0.000000] last_pfn = 0x128000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xcd9ff max_arch_pfn = 0x400000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cd9ff000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000128000000 [ 0.000000] ACPI: RSDP 00000000000fec00 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000000fc7cb 00074 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: FACP 00000000000fc8fb 000F4 (v03 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: DSDT 00000000ffe9cff8 054AD (v01 DELL dt_ex 00001000 INTL 20050624) [ 0.000000] ACPI: FACS 00000000cd9ffc00 00040 [ 0.000000] ACPI: SSDT 00000000ffea25c4 000AA (v01 DELL st_ex 00001000 INTL 20050624) [ 0.000000] ACPI: APIC 00000000000fc9ef 00092 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: BOOT 00000000000fca81 00028 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: ASF! 00000000000fcaa9 00096 (v32 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: MCFG 00000000000fcb3f 0003E (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: HPET 00000000000fcb7d 00038 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: TCPA 00000000000fcdd9 00032 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: DMAR 00000000000fce0b 00120 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: SLIC 00000000000fcbb5 00176 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0128000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 000179bb94] TEXT DATA BSS ==> [0001000000 - 000179bb94] [ 0.000000] #3 [000009a000 - 0000100000] BIOS reserved ==> [000009a000 - 0000100000] [ 0.000000] #4 [000179c000 - 000179c1f0] BRK ==> [000179c000 - 000179c1f0] [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #6 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00128000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009a [ 0.000000] 0: 0x00000100 -> 0x000cd9ff [ 0.000000] 0: 0x00100000 -> 0x00128000 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] 8 Processors exceeds NR_CPUS limit of 4 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) [ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff880028022000, static data 93856 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 989291 [ 0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=2 console=ttyS0,115200 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 3884988k/4849664k available (4260k kernel code, 825756k absent, 137936k reserved, 2034k data, 432k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:384 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2659.879 MHz processor. [ 0.000042] I-pipe 2.4-06: pipeline enabled. [ 0.003096] Console: colour VGA+ 80x25 [ 0.003113] console [ttyS0] enabled [ 0.004000] HPET: 8 timers in total, 4 timers will be used for per-cpu timer [ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.75 BogoMIPS (lpj=10639516) [ 0.012022] Mount-cache hash table entries: 256 [ 0.016112] Initializing cgroup subsys ns [ 0.020004] Initializing cgroup subsys cpuacct [ 0.024006] Initializing cgroup subsys freezer [ 0.028010] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.033650] CPU: L2 cache: 3072K [ 0.036003] CPU: Physical Processor ID: 0 [ 0.040002] CPU: Processor Core ID: 0 [ 0.044003] mce: CPU supports 6 MCE banks [ 0.048006] CPU0: Thermal monitoring enabled (TM2) [ 0.052003] Performance Counters: Core2 events, Intel PMU driver. [ 0.060003] ... version: 2 [ 0.064002] ... bit width: 40 [ 0.068002] ... generic counters: 2 [ 0.072002] ... value mask: 000000ffffffffff [ 0.076002] ... max period: 000000007fffffff [ 0.080002] ... fixed-purpose counters: 3 [ 0.084002] ... counter mask: 0000000700000003 [ 0.088011] Freeing SMP alternatives: 35k freed [ 0.092021] ACPI: Core revision 20090521 [ 0.336906] Setting APIC routing to flat [ 0.340306] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.344001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.344001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.344001] ..... (found apic 0 pin 2) ... [ 0.386514] ....... works. [ 0.388002] CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.400001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5319.98 BogoMIPS (lpj=10639975) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.489164] CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.497224] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.500072] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 5320.00 BogoMIPS (lpj=10640017) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU2: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.597282] CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.605223] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.608059] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 5320.00 BogoMIPS (lpj=10640010) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU3: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.705231] CPU3: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.713225] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.716018] Brought up 4 CPUs [ 0.720004] Total of 4 processors activated (21279.75 BogoMIPS). [ 0.724038] Testing NMI watchdog ... OK. [ 0.809597] NET: Registered protocol family 16 [ 0.812029] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.816004] ACPI: bus type pci registered [ 0.820006] PCI: Using configuration type 1 for base access [ 0.832034] bio: create slab <bio-0> at 0 [ 0.902534] ACPI: BIOS _OSI(Linux) query ignored [ 0.934344] ACPI: Interpreter enabled [ 0.936004] ACPI: (supports S0 S5) [ 0.940547] ACPI: Using IOAPIC for interrupt routing [ 1.052369] ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 7F 20090521 tbutils-246 [ 1.062354] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 1.072373] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.076208] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.080007] pci 0000:00:03.0: PME# disabled [ 1.088337] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 1.092005] pci 0000:00:19.0: PME# disabled [ 1.096270] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.100006] pci 0000:00:1a.7: PME# disabled [ 1.104071] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.108010] pci 0000:00:1b.0: PME# disabled [ 1.112050] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.116006] pci 0000:00:1c.0: PME# disabled [ 1.120050] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.124005] pci 0000:00:1c.1: PME# disabled [ 1.132254] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.136006] pci 0000:00:1d.7: PME# disabled [ 1.140203] pci 0000:00:1f.2: PME# supported from D3hot [ 1.144005] pci 0000:00:1f.2: PME# disabled [ 1.148204] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot [ 1.152006] pci 0000:03:00.0: PME# disabled [ 1.156078] pci 0000:03:02.0: PME# supported from D1 D2 D3hot D3cold [ 1.160006] pci 0000:03:02.0: PME# disabled [ 1.164041] pci 0000:00:1e.0: transparent bridge [ 2.617387] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 2.625933] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 2.633859] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 2.641581] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 2.649576] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 2.658550] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 2.666297] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 2.674117] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 2.681298] SCSI subsystem initialized [ 2.684038] usbcore: registered new interface driver usbfs [ 2.688026] usbcore: registered new interface driver hub [ 2.692038] usbcore: registered new device driver usb [ 2.696038] PCI: Using ACPI for IRQ routing [ 2.748009] pnp: PnP ACPI init [ 2.751047] ACPI: bus type pnp registered [ 2.807235] pnp: PnP ACPI: found 9 devices [ 2.811319] ACPI: ACPI bus type pnp unregistered [ 2.815931] system 00:01: ioport range 0x800-0x85f has been reserved [ 2.822265] system 00:01: ioport range 0xc00-0xc7f has been reserved [ 2.828598] system 00:01: ioport range 0x860-0x8ff has been reserved [ 2.840075] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 2.845977] pci 0000:00:1c.0: IO window: disabled [ 2.850840] pci 0000:00:1c.0: MEM window: 0xfe500000-0xfe5fffff [ 2.856915] pci 0000:00:1c.0: PREFETCH window: disabled [ 2.862298] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 2.868199] pci 0000:00:1c.1: IO window: disabled [ 2.873063] pci 0000:00:1c.1: MEM window: 0xfe400000-0xfe4fffff [ 2.879138] pci 0000:00:1c.1: PREFETCH window: disabled [ 2.884521] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 2.890424] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 2.895720] pci 0000:00:1e.0: MEM window: 0xfe300000-0xfe3fffff [ 2.901796] pci 0000:00:1e.0: PREFETCH window: disabled [ 2.907187] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.913874] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.920591] NET: Registered protocol family 2 [ 2.924951] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.932426] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 2.941140] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.948226] TCP: Hash tables configured (established 262144 bind 65536) [ 2.954820] TCP reno registered [ 2.958036] NET: Registered protocol family 1 [ 2.962563] Simple Boot Flag at 0x7a set to 0x1 [ 2.968879] audit: initializing netlink socket (disabled) [ 2.974267] type=2000 audit(1254841152.972:1): initialized [ 2.982428] I-pipe: Domain Xenomai registered. [ 2.986954] Xenomai: hal/x86_64 started. [ 2.990884] Xenomai: scheduling class idle registered. [ 2.996006] Xenomai: scheduling class rt registered. [ 3.003798] Xenomai: real-time nucleus v2.5-rc3 (Flying In A Blue Dream) loaded. [ 3.011332] Xenomai: NMI watchdog started (threshold=100 us). [ 3.017097] Xenomai: starting native API services. [ 3.021878] Xenomai: starting POSIX services. [ 3.026629] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.038214] Installing knfsd (copyright (C) 1996 okir@domain.hid). [ 3.045233] fuse init (API version 7.12) [ 3.049409] msgmni has been set to 7589 [ 3.053722] alg: No test for stdrng (krng) [ 3.058013] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.065387] io scheduler noop registered [ 3.069296] io scheduler anticipatory registered [ 3.073899] io scheduler deadline registered [ 3.078167] io scheduler cfq registered (default) [ 3.083571] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.093304] Non-volatile memory driver v1.3 [ 3.097476] Linux agpgart interface v0.103 [ 3.101569] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset [ 3.108156] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 3.116739] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 3.123641] [drm] Initialized drm 1.1.0 20060810 [ 3.128261] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.798656] [drm] TMDS-8: set mode 1920x1080 13 [ 4.028846] Console: switching to colour frame buffer device 240x67 [ 4.043889] [drm] fb0: inteldrmfb frame buffer device [ 4.048938] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 4.056122] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.316147] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 4.322666] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 4.328370] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.335408] 0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17) is a 16550A [ 4.344169] brd: module loaded [ 4.348340] loop: module loaded [ 4.351839] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.358698] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x2f impl RAID mode [ 4.366850] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems [ 4.404066] scsi0 : ahci [ 4.406833] scsi1 : ahci [ 4.409536] scsi2 : ahci [ 4.412235] scsi3 : ahci [ 4.414936] scsi4 : ahci [ 4.417638] scsi5 : ahci [ 4.421777] ata1: SATA max UDMA/133 abar m2048@domain.hid port 0xff970100 irq 31 [ 4.429155] ata2: SATA max UDMA/133 abar m2048@domain.hid port 0xff970180 irq 31 [ 4.436528] ata3: SATA max UDMA/133 abar m2048@domain.hid port 0xff970200 irq 31 [ 4.443902] ata4: SATA max UDMA/133 abar m2048@domain.hid port 0xff970280 irq 31 [ 4.451274] ata5: DUMMY [ 4.453712] ata6: SATA max UDMA/133 abar m2048@domain.hid port 0xff970380 irq 31 [ 4.461429] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 4.467850] Copyright (c) 1999-2006 Intel Corporation. [ 4.473035] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 4.478935] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 4.484767] e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 4.491708] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb [ 4.608581] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:e8:39:3c:95 [ 4.615954] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 4.622321] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: 2021ff-0ff [ 4.628547] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 [ 4.635227] Copyright (c) 2007-2009 Intel Corporation. [ 4.640409] Intel(R) Virtual Function Network Driver - version 1.0.0-k0 [ 4.647003] Copyright (c) 2009 Intel Corporation. [ 4.651760] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 4.658181] 8139cp 0000:03:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 4.667772] tun: Universal TUN/TAP device driver, 1.6 [ 4.672807] tun: (C) 1999-2004 Max Krasnyansky <maxk@domain.hid> [ 4.679165] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.685686] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 4.692808] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 4.698110] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 4.709392] ehci_hcd 0000:00:1a.7: debug port 1 [ 4.713927] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe6da000 [ 4.732011] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 4.737776] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.744543] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.751743] usb usb1: Product: EHCI Host Controller [ 4.756606] usb usb1: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 ehci_hcd [ 4.763544] usb usb1: SerialNumber: 0000:00:1a.7 [ 4.768233] usb usb1: configuration #1 chosen from 1 choice [ 4.773866] hub 1-0:1.0: USB hub found [ 4.777608] hub 1-0:1.0: 6 ports detected [ 4.780039] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.780059] ata3: SATA link down (SStatus 4 SControl 300) [ 4.780080] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.780095] ata4: SATA link down (SStatus 4 SControl 300) [ 4.780112] ata6: SATA link down (SStatus 0 SControl 300) [ 4.806901] ata2.00: ATAPI: PLDS DVD+/-RW DH-16AAS, JD12, max UDMA/100, ATAPI AN [ 4.806924] ata1.00: ATA-8: ST3500418AS, CC44, max UDMA/133 [ 4.806926] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.809380] ata2.00: configured for UDMA/100 [ 4.833961] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.841084] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.846367] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 4.847286] ata1.00: configured for UDMA/133 [ 4.847374] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC44 PQ: 0 ANSI: 5 [ 4.847587] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.847663] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 4.847697] sd 0:0:0:0: [sda] Write Protect is off [ 4.847716] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.892588] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DH-16AAS JD12 PQ: 0 ANSI: 5 [ 4.896513] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.896533] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000 [ 4.900473] sda: [ 4.908013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 4.908033] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.908035] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.908036] usb usb2: Product: EHCI Host Controller [ 4.908038] usb usb2: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 ehci_hcd [ 4.908039] usb usb2: SerialNumber: 0000:00:1d.7 [ 4.908122] usb usb2: configuration #1 chosen from 1 choice [ 4.908187] hub 2-0:1.0: USB hub found [ 4.908191] hub 2-0:1.0: 6 ports detected [ 4.908291] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.908348] uhci_hcd: USB Universal Host Controller Interface driver [ 4.908433] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.908441] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 4.908511] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 4.908518] uhci_hcd 0000:00:1a.0: detected 2 ports [ 4.908551] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20 [ 4.908585] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.908586] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.908588] usb usb3: Product: UHCI Host Controller [ 4.908589] usb usb3: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 4.908591] usb usb3: SerialNumber: 0000:00:1a.0 [ 4.908669] usb usb3: configuration #1 chosen from 1 choice [ 4.908741] hub 3-0:1.0: USB hub found [ 4.908746] hub 3-0:1.0: 2 ports detected [ 4.908792] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.908799] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 4.908874] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 4.908881] uhci_hcd 0000:00:1a.1: detected 2 ports [ 4.908914] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00 [ 4.908946] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.908947] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.908949] usb usb4: Product: UHCI Host Controller [ 4.908950] usb usb4: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 4.908952] usb usb4: SerialNumber: 0000:00:1a.1 [ 4.909038] usb usb4: configuration #1 chosen from 1 choice [ 4.909109] hub 4-0:1.0: USB hub found [ 4.909114] hub 4-0:1.0: 2 ports detected [ 4.909159] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 4.909167] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 4.909234] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 4.909241] uhci_hcd 0000:00:1a.2: detected 2 ports [ 4.909265] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00 [ 4.909297] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.909299] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.909300] usb usb5: Product: UHCI Host Controller [ 4.909302] usb usb5: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 4.909303] usb usb5: SerialNumber: 0000:00:1a.2 [ 4.909384] usb usb5: configuration #1 chosen from 1 choice [ 4.909447] hub 5-0:1.0: USB hub found [ 4.909452] hub 5-0:1.0: 2 ports detected [ 4.909498] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.909506] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.909574] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 4.909581] uhci_hcd 0000:00:1d.0: detected 2 ports [ 4.909605] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80 [ 4.909636] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.909638] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.909639] usb usb6: Product: UHCI Host Controller [ 4.909641] usb usb6: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 4.909642] usb usb6: SerialNumber: 0000:00:1d.0 [ 4.909722] usb usb6: configuration #1 chosen from 1 choice [ 4.909793] hub 6-0:1.0: USB hub found [ 4.909797] hub 6-0:1.0: 2 ports detected [ 4.909845] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.909851] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.909919] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 4.909926] uhci_hcd 0000:00:1d.1: detected 2 ports [ 4.909950] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60 [ 4.909985] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.909987] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.909988] usb usb7: Product: UHCI Host Controller [ 4.909990] usb usb7: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 4.909991] usb usb7: SerialNumber: 0000:00:1d.1 [ 4.910069] usb usb7: configuration #1 chosen from 1 choice [ 4.910135] hub 7-0:1.0: USB hub found [ 4.910139] hub 7-0:1.0: 2 ports detected [ 4.910186] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.910193] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.910258] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 4.910265] uhci_hcd 0000:00:1d.2: detected 2 ports [ 4.910300] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 4.910340] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.910342] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.910343] usb usb8: Product: UHCI Host Controller [ 4.910345] usb usb8: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 4.910346] usb usb8: SerialNumber: 0000:00:1d.2 [ 4.910427] usb usb8: configuration #1 chosen from 1 choice [ 4.910500] hub 8-0:1.0: USB hub found [ 4.910504] hub 8-0:1.0: 2 ports detected [ 4.910659] usbcore: registered new interface driver usblp [ 4.910661] Initializing USB Mass Storage driver... [ 4.910734] usbcore: registered new interface driver usb-storage [ 4.910735] USB Mass Storage support registered. [ 4.910803] usbcore: registered new interface driver libusual [ 4.911018] PNP: No PS/2 controller found. Probing ports directly. [ 4.925152] sda1 sda2 sda3 sda4 < sda5 sda6 > [ 5.455328] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.456069] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.456074] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.456195] mice: PS/2 mouse device common for all mice [ 5.456339] rtc_cmos 00:05: RTC can wake from S4 [ 5.456401] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 5.456433] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs [ 5.456487] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.456611] cpuidle: using governor ladder [ 5.456612] cpuidle: using governor menu [ 5.458055] usbcore: registered new interface driver hiddev [ 5.458110] usbcore: registered new interface driver usbhid [ 5.458111] usbhid: v2.6:USB HID core driver [ 5.458129] Netfilter messages via NETLINK v0.30. [ 5.458141] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 5.458328] ctnetlink v0.93: registering with nfnetlink. [ 5.458413] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.458433] TCP cubic registered [ 5.458434] Initializing XFRM netlink socket [ 5.458691] NET: Registered protocol family 10 [ 5.458857] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 5.458873] IPv6 over IPv4 tunneling driver [ 5.458994] NET: Registered protocol family 17 [ 5.459129] RPC: Registered udp transport module. [ 5.459131] RPC: Registered tcp transport module. [ 5.585623] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.593090] Uniform CD-ROM driver Revision: 3.20 [ 5.597922] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.675001] kjournald starting. Commit interval 5 seconds [ 5.675011] EXT3-fs: mounted filesystem with writeback data mode. [ 5.675022] VFS: Mounted root (ext3 filesystem) readonly on device 8:3. [ 5.675045] Freeing unused kernel memory: 432k freed [ 6.096012] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 6.297373] usb 5-1: New USB device found, idVendor=413c, idProduct=2101 [ 6.304061] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.311178] usb 5-1: Product: Dell Smart Card Reader Keyboard [ 6.316907] usb 5-1: Manufacturer: Dell [ 6.320841] usb 5-1: configuration #1 chosen from 1 choice [ 6.333696] input: Dell Dell Smart Card Reader Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input0 [ 6.344805] generic-usb 0003:413C:2101.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell Dell Smart Card Reader Keyboard] on usb-0000:00:1a.2-1/input0 [ 6.600024] usb 5-2: new low speed USB device using uhci_hcd and address 3 [ 64.668504] BUG: NMI Watchdog detected LOCKUP on CPU0, ip ffffffff8134b8c6, registers: [ 64.668504] CPU 0 [ 64.668504] Modules linked in: 8139too [ 64.668504] Pid: 4969, comm: sampling-4967 Not tainted 2.6.31.1-xenomai-i2.4-06 #3 OptiPlex 960 [ 64.668504] RIP: 0010:[<ffffffff8134b8c6>] [<ffffffff8134b8c6>] rthal_nmi_arm+0x86/0xe2 [ 64.668504] RSP: 0018:ffff880126559cb8 EFLAGS: 00000086 [ 64.668504] RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 00000000000000c2 [ 64.668504] RDX: 0000000000000000 RSI: 0000000000000187 RDI: 0000000000000001 [ 64.668504] RBP: ffffffff8178e6c0 R08: 0000000000006340 R09: 0000000000000639 [ 64.668504] R10: 0000000000000007 R11: 0000000000000006 R12: 000000000004dcb3 [ 64.668504] R13: 000000344a47cb20 R14: 0000000000000006 R15: 0000000000000000 [ 64.668504] FS: 00007f8d8cd19950(0000) GS:ffff880028022000(0000) knlGS:0000000000000000 [ 64.668504] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 64.668504] CR2: 00007f8d8c90b82e CR3: 0000000121980000 CR4: 00000000000406f0 [ 64.668504] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 64.668504] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 64.668504] I-pipe domain Xenomai [ 64.668504] Stack: [ 64.668504] 0000000000000000 ffffffff8174ce40 ffffc9000001ee98 ffffffff810792c3 [ 64.668504] <0> fffffffdffffffff 0000000000000187 ffffffff8173b600 0000000000000008 [ 64.668504] <0> 000000000000e550 ffffffff8106f1f3 0000000000000000 ffffffff8107ad2f [ 64.668504] Call Trace: [ 64.668504] [<ffffffff810792c3>] ? xnintr_clock_handler+0x63/0x171 [ 64.668504] [<ffffffff8106f1f3>] ? __virq_end+0x37/0xe0 [ 64.668504] [<ffffffff8107ad2f>] ? xnpod_suspend_thread+0x16c/0x1a8 [ 64.668504] [<ffffffff8106fa2d>] ? __ipipe_restore_pipeline_head+0x64/0x6e [ 64.668504] [<ffffffff81087435>] ? rt_task_set_periodic+0x8a/0x9a [ 64.668504] [<ffffffff81089ba4>] ? __rt_task_set_periodic+0x89/0x97 [ 64.668504] [<ffffffff810880b3>] ? __xn_safe_copy_to_user+0x28/0x38 [ 64.668504] [<ffffffff8108351c>] ? hisyscall_event+0x13d/0x27d [ 64.668504] [<ffffffff8106f384>] ? __ipipe_dispatch_event+0xe8/0x1e1 [ 64.668504] [<ffffffff81029358>] ? enqueue_task+0x28/0x33 [ 64.668504] [<ffffffff8101ed36>] ? __ipipe_syscall_root+0x5b/0xc2 [ 64.668504] [<ffffffff81422bb8>] ? __ipipe_syscall_root_thunk+0x35/0x6a [ 64.668504] [<ffffffff8100af44>] ? system_call_after_swapgs+0x54/0x79 [ 64.668504] Code: 00 19 ff 83 65 1c fe 83 e7 01 0f ae f8 f6 83 dd e6 78 81 10 48 8b 8b c8 e6 78 81 74 07 31 d2 83 c8 ff eb 05 83 c8 ff 89 c2 0f 30 <90> 65 48 8b 14 25 a0 cb 00 00 48 c7 c0 50 e5 00 00 48 8b 84 02 [ 64.668504] ---[ end trace 8f1e7db5aa2a3b0e ]--- [ 66.372023] ata2.00: qc timeout (cmd 0xa1) [ 66.376110] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 66.382184] ata2.00: revalidation failed (errno=-5) [ 66.387061] ata2: hard resetting link [ 66.708023] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 71.712019] ata2.00: qc timeout (cmd 0xef) [ 71.716106] ata2.00: failed to enable ATAPI AN (err_mask=0x4) [ 71.721855] ata2.00: failed to set xfermode (err_mask=0x40) [ 71.727410] ata2: limiting SATA link speed to 1.5 Gbps [ 71.732533] ata2.00: limiting speed to UDMA/100:PIO3 [ 71.737482] ata2: hard resetting link [ 72.060023] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 76.793247] ata2.00: configured for UDMA/100 [ 81.796023] ata2.00: qc timeout (cmd 0xa0) [ 81.800110] ata2.00: TEST_UNIT_READY failed (err_mask=0x5) [ 81.805579] ata2.00: disabled [ 81.808531] ata2: hard resetting link [ 82.128022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 82.134186] ata2: EH complete [ 106.808519] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x6 frozen [ 106.815552] ata1.00: cmd 61/10:08:64:88:d7/00:00:05:00:00/40 tag 1 ncq 8192 out [ 106.815553] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 106.830204] ata1.00: status: { DRDY } [ 106.833857] ata1: hard resetting link [ 107.157519] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 112.161015] ata1.00: qc timeout (cmd 0x27) [ 112.165102] ata1.00: failed to read native max address (err_mask=0x4) [ 112.171521] ata1.00: HPA support seems broken, skipping HPA handling [ 112.177854] ata1.00: revalidation failed (errno=-5) [ 112.182718] ata1: hard resetting link [ 112.505020] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 117.509015] ata1.00: qc timeout (cmd 0xec) [ 117.513102] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 117.519176] ata1.00: revalidation failed (errno=-5) [ 117.524041] ata1: limiting SATA link speed to 1.5 Gbps [ 117.529165] ata1: hard resetting link [ 117.849020] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 127.853014] ata1.00: qc timeout (cmd 0xec) [ 127.857102] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 127.863177] ata1.00: revalidation failed (errno=-5) [ 127.868041] ata1.00: disabled [ 127.871001] ata1.00: device reported invalid CHS sector 0 [ 127.876387] ata1: hard resetting link [ 128.201021] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 128.207187] ata1: EH complete [ 128.210153] sd 0:0:0:0: [sda] Unhandled error code [ 128.214930] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 128.222491] end_request: I/O error, dev sda, sector 98011236 [ 128.228142] Aborting journal on device sda3. [ 128.232409] EXT3-fs error (device sda3) in ext3_reserve_inode_write: Journal has aborted [ 128.240476] sd 0:0:0:0: [sda] Unhandled error code [ 128.244473] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 128.244473] end_request: I/O error, dev sda, sector 98008860 [ 128.244473] Buffer I/O error on device sda3, logical block 1545 [ 128.244473] lost page write due to I/O error on sda3 [ 128.269332] sd 0:0:0:0: [sda] Unhandled error code [ 128.274108] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 128.281663] end_request: I/O error, dev sda, sector 97996500 [ 128.287304] Buffer I/O error on device sda3, logical block 0 [ 128.292945] lost page write due to I/O error on sda3 [ 128.297898] EXT3-fs error (device sda3) in ext3_dirty_inode: Journal has aborted [ 128.305293] journal commit I/O error [ 128.305302] ------------[ cut here ]------------ [ 128.305307] WARNING: at fs/buffer.c:1152 mark_buffer_dirty+0x23/0x71() [ 128.305309] Hardware name: OptiPlex 960 [ 128.305310] Modules linked in: 8139too [ 128.305313] Pid: 4191, comm: metalog Tainted: G D 2.6.31.1-xenomai-i2.4-06 #3 [ 128.305315] Call Trace: [ 128.305319] [<ffffffff8103465c>] ? warn_slowpath_common+0x76/0x8c [ 128.305321] [<ffffffff810e2648>] ? mark_buffer_dirty+0x23/0x71 [ 128.305324] [<ffffffff81119580>] ? T.699+0x4d/0x59 [ 128.305326] [<ffffffff8111960b>] ? ext3_handle_error+0x7f/0xa6 [ 128.305328] [<ffffffff8111968c>] ? __ext3_std_error+0x5a/0x61 [ 128.305331] [<ffffffff811196c9>] ? __ext3_journal_stop+0x36/0x3d [ 128.305333] [<ffffffff810ddd74>] ? __mark_inode_dirty+0x26/0xf6 [ 128.305336] [<ffffffff810d53b5>] ? file_update_time+0xa6/0xe6 [ 128.305340] [<ffffffff8109d8bf>] ? __generic_file_aio_write_nolock+0x164/0x285 [ 128.305343] [<ffffffff8109dc48>] ? generic_file_aio_write+0x60/0xb9 [ 128.305346] [<ffffffff81110263>] ? ext3_file_write+0x15/0x92 [ 128.305349] [<ffffffff810c5615>] ? do_sync_write+0xcf/0x10b [ 128.305352] [<ffffffff81046077>] ? autoremove_wake_function+0x0/0x2a [ 128.305354] [<ffffffff810c5b34>] ? vfs_write+0xa0/0xdd [ 128.305358] [<ffffffff81422bb8>] ? __ipipe_syscall_root_thunk+0x35/0x6a [ 128.305360] [<ffffffff810c5c24>] ? sys_write+0x45/0x6b [ 128.305363] [<ffffffff8100af7f>] ? system_call_fastpath+0x16/0x1b [ 128.305365] ---[ end trace 8f1e7db5aa2a3b0f ]--- [ 128.305374] sd 0:0:0:0: [sda] Unhandled error code [ 128.305376] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 128.305378] end_request: I/O error, dev sda, sector 97996500 [ 128.305380] Buffer I/O error on device sda3, logical block 0 [ 128.305381] lost page write due to I/O error on sda3 [ 128.305386] ext3_abort called. [ 128.305387] EXT3-fs error (device sda3): ext3_journal_start_sb: Detected aborted journal [ 128.305389] Remounting filesystem read-only [-- Attachment #3: panic.rt_task_sleep --] [-- Type: text/plain, Size: 36409 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31.1-xenomai-i2.4-06 (root@domain.hid) (gcc version 4.4.1 (Gentoo 4.4.1 p1.0) ) #3 SMP Tue Oct 6 14:45:26 CEST 2009 [ 0.000000] Command line: root=/dev/sda3 nmi_watchdog=2 console=ttyS0,115200 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cd9ffc00 (usable) [ 0.000000] BIOS-e820: 00000000cd9ffc00 - 00000000cda53c00 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cda53c00 - 00000000cda55c00 (ACPI data) [ 0.000000] BIOS-e820: 00000000cda55c00 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000128000000 (usable) [ 0.000000] DMI 2.5 present. [ 0.000000] last_pfn = 0x128000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xcd9ff max_arch_pfn = 0x400000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cd9ff000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000128000000 [ 0.000000] ACPI: RSDP 00000000000fec00 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000000fc7cb 00074 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: FACP 00000000000fc8fb 000F4 (v03 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: DSDT 00000000ffe9cff8 054AD (v01 DELL dt_ex 00001000 INTL 20050624) [ 0.000000] ACPI: FACS 00000000cd9ffc00 00040 [ 0.000000] ACPI: SSDT 00000000ffea25c4 000AA (v01 DELL st_ex 00001000 INTL 20050624) [ 0.000000] ACPI: APIC 00000000000fc9ef 00092 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: BOOT 00000000000fca81 00028 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: ASF! 00000000000fcaa9 00096 (v32 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: MCFG 00000000000fcb3f 0003E (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: HPET 00000000000fcb7d 00038 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: TCPA 00000000000fcdd9 00032 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: DMAR 00000000000fce0b 00120 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: SLIC 00000000000fcbb5 00176 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0128000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 000179bb94] TEXT DATA BSS ==> [0001000000 - 000179bb94] [ 0.000000] #3 [000009a000 - 0000100000] BIOS reserved ==> [000009a000 - 0000100000] [ 0.000000] #4 [000179c000 - 000179c1f0] BRK ==> [000179c000 - 000179c1f0] [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #6 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00128000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009a [ 0.000000] 0: 0x00000100 -> 0x000cd9ff [ 0.000000] 0: 0x00100000 -> 0x00128000 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] 8 Processors exceeds NR_CPUS limit of 4 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) [ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff880028022000, static data 93856 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 989291 [ 0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=2 console=ttyS0,115200 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 3884988k/4849664k available (4260k kernel code, 825756k absent, 137936k reserved, 2034k data, 432k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:384 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2660.296 MHz processor. [ 0.000042] I-pipe 2.4-06: pipeline enabled. [ 0.003092] Console: colour VGA+ 80x25 [ 0.003109] console [ttyS0] enabled [ 0.004000] HPET: 8 timers in total, 4 timers will be used for per-cpu timer [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.59 BogoMIPS (lpj=10641184) [ 0.012022] Mount-cache hash table entries: 256 [ 0.016112] Initializing cgroup subsys ns [ 0.020003] Initializing cgroup subsys cpuacct [ 0.024006] Initializing cgroup subsys freezer [ 0.028010] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.033651] CPU: L2 cache: 3072K [ 0.036003] CPU: Physical Processor ID: 0 [ 0.040002] CPU: Processor Core ID: 0 [ 0.044003] mce: CPU supports 6 MCE banks [ 0.048006] CPU0: Thermal monitoring enabled (TM2) [ 0.052003] Performance Counters: Core2 events, Intel PMU driver. [ 0.060003] ... version: 2 [ 0.064002] ... bit width: 40 [ 0.068002] ... generic counters: 2 [ 0.072002] ... value mask: 000000ffffffffff [ 0.076002] ... max period: 000000007fffffff [ 0.080002] ... fixed-purpose counters: 3 [ 0.084002] ... counter mask: 0000000700000003 [ 0.088010] Freeing SMP alternatives: 35k freed [ 0.092021] ACPI: Core revision 20090521 [ 0.337289] Setting APIC routing to flat [ 0.340306] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.344001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.344001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.344001] ..... (found apic 0 pin 2) ... [ 0.386913] ....... works. [ 0.388002] CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.400001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5319.90 BogoMIPS (lpj=10639813) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.489182] CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.497225] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.500071] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 5319.92 BogoMIPS (lpj=10639859) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU2: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.597223] CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.605225] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.608058] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 5319.94 BogoMIPS (lpj=10639895) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU3: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.705252] CPU3: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.713225] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.716017] Brought up 4 CPUs [ 0.720004] Total of 4 processors activated (21280.37 BogoMIPS). [ 0.724037] Testing NMI watchdog ... OK. [ 0.809639] NET: Registered protocol family 16 [ 0.812035] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.816004] ACPI: bus type pci registered [ 0.820006] PCI: Using configuration type 1 for base access [ 0.832039] bio: create slab <bio-0> at 0 [ 0.901847] ACPI: BIOS _OSI(Linux) query ignored [ 0.933799] ACPI: Interpreter enabled [ 0.936004] ACPI: (supports S0 S5) [ 0.940549] ACPI: Using IOAPIC for interrupt routing [ 1.052138] ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 7F 20090521 tbutils-246 [ 1.065819] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 1.079930] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.080208] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.084007] pci 0000:00:03.0: PME# disabled [ 1.088363] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 1.092006] pci 0000:00:19.0: PME# disabled [ 1.096269] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.100006] pci 0000:00:1a.7: PME# disabled [ 1.104071] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.108005] pci 0000:00:1b.0: PME# disabled [ 1.112049] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.116006] pci 0000:00:1c.0: PME# disabled [ 1.120051] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.124006] pci 0000:00:1c.1: PME# disabled [ 1.128300] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.132006] pci 0000:00:1d.7: PME# disabled [ 1.136203] pci 0000:00:1f.2: PME# supported from D3hot [ 1.140006] pci 0000:00:1f.2: PME# disabled [ 1.144203] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot [ 1.148006] pci 0000:03:00.0: PME# disabled [ 1.152078] pci 0000:03:02.0: PME# supported from D1 D2 D3hot D3cold [ 1.156006] pci 0000:03:02.0: PME# disabled [ 1.160042] pci 0000:00:1e.0: transparent bridge [ 2.609858] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 2.618932] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 2.626676] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 2.634569] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 2.642383] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 2.651364] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 2.659032] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 2.666935] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 2.674195] SCSI subsystem initialized [ 2.676039] usbcore: registered new interface driver usbfs [ 2.680026] usbcore: registered new interface driver hub [ 2.684039] usbcore: registered new device driver usb [ 2.688038] PCI: Using ACPI for IRQ routing [ 2.736008] pnp: PnP ACPI init [ 2.739045] ACPI: bus type pnp registered [ 2.795170] pnp: PnP ACPI: found 9 devices [ 2.799255] ACPI: ACPI bus type pnp unregistered [ 2.803867] system 00:01: ioport range 0x800-0x85f has been reserved [ 2.810201] system 00:01: ioport range 0xc00-0xc7f has been reserved [ 2.816534] system 00:01: ioport range 0x860-0x8ff has been reserved [ 2.828014] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 2.833915] pci 0000:00:1c.0: IO window: disabled [ 2.838777] pci 0000:00:1c.0: MEM window: 0xfe500000-0xfe5fffff [ 2.844852] pci 0000:00:1c.0: PREFETCH window: disabled [ 2.850234] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 2.856135] pci 0000:00:1c.1: IO window: disabled [ 2.860997] pci 0000:00:1c.1: MEM window: 0xfe400000-0xfe4fffff [ 2.867076] pci 0000:00:1c.1: PREFETCH window: disabled [ 2.872457] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 2.878358] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 2.883654] pci 0000:00:1e.0: MEM window: 0xfe300000-0xfe3fffff [ 2.889729] pci 0000:00:1e.0: PREFETCH window: disabled [ 2.895118] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.901805] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.908521] NET: Registered protocol family 2 [ 2.912883] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.920355] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 2.929073] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.936162] TCP: Hash tables configured (established 262144 bind 65536) [ 2.942755] TCP reno registered [ 2.945968] NET: Registered protocol family 1 [ 2.950495] Simple Boot Flag at 0x7a set to 0x1 [ 2.956874] audit: initializing netlink socket (disabled) [ 2.962262] type=2000 audit(1254841457.960:1): initialized [ 2.970427] I-pipe: Domain Xenomai registered. [ 2.974954] Xenomai: hal/x86_64 started. [ 2.978881] Xenomai: scheduling class idle registered. [ 2.984002] Xenomai: scheduling class rt registered. [ 2.991684] Xenomai: real-time nucleus v2.5-rc3 (Flying In A Blue Dream) loaded. [ 2.999215] Xenomai: NMI watchdog started (threshold=100 us). [ 3.004977] Xenomai: starting native API services. [ 3.009756] Xenomai: starting POSIX services. [ 3.014500] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.026510] Installing knfsd (copyright (C) 1996 okir@domain.hid). [ 3.033532] fuse init (API version 7.12) [ 3.037706] msgmni has been set to 7589 [ 3.042333] alg: No test for stdrng (krng) [ 3.046587] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.053964] io scheduler noop registered [ 3.057875] io scheduler anticipatory registered [ 3.062477] io scheduler deadline registered [ 3.066743] io scheduler cfq registered (default) [ 3.072202] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.082087] Non-volatile memory driver v1.3 [ 3.086256] Linux agpgart interface v0.103 [ 3.090347] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset [ 3.096914] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 3.105504] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 3.112410] [drm] Initialized drm 1.1.0 20060810 [ 3.117038] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.786611] [drm] TMDS-8: set mode 1920x1080 13 [ 4.016795] Console: switching to colour frame buffer device 240x67 [ 4.031836] [drm] fb0: inteldrmfb frame buffer device [ 4.036884] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 4.044072] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.304141] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 4.310660] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 4.316364] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.323400] 0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17) is a 16550A [ 4.332153] brd: module loaded [ 4.336329] loop: module loaded [ 4.339825] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.346683] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x2f impl RAID mode [ 4.354835] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems [ 4.392065] scsi0 : ahci [ 4.394830] scsi1 : ahci [ 4.397533] scsi2 : ahci [ 4.400232] scsi3 : ahci [ 4.402932] scsi4 : ahci [ 4.405632] scsi5 : ahci [ 4.409768] ata1: SATA max UDMA/133 abar m2048@domain.hid port 0xff970100 irq 31 [ 4.417145] ata2: SATA max UDMA/133 abar m2048@domain.hid port 0xff970180 irq 31 [ 4.424516] ata3: SATA max UDMA/133 abar m2048@domain.hid port 0xff970200 irq 31 [ 4.431887] ata4: SATA max UDMA/133 abar m2048@domain.hid port 0xff970280 irq 31 [ 4.439258] ata5: DUMMY [ 4.441696] ata6: SATA max UDMA/133 abar m2048@domain.hid port 0xff970380 irq 31 [ 4.449431] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 4.455850] Copyright (c) 1999-2006 Intel Corporation. [ 4.461035] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 4.466935] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 4.472766] e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 4.479707] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb [ 4.596585] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:e8:39:3c:95 [ 4.603955] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 4.610320] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: 2021ff-0ff [ 4.616544] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 [ 4.623224] Copyright (c) 2007-2009 Intel Corporation. [ 4.628405] Intel(R) Virtual Function Network Driver - version 1.0.0-k0 [ 4.634998] Copyright (c) 2009 Intel Corporation. [ 4.639754] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 4.646173] 8139cp 0000:03:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 4.655763] tun: Universal TUN/TAP device driver, 1.6 [ 4.660798] tun: (C) 1999-2004 Max Krasnyansky <maxk@domain.hid> [ 4.667154] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.673676] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 4.680797] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 4.686099] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 4.697375] ehci_hcd 0000:00:1a.7: debug port 1 [ 4.701909] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe6da000 [ 4.720010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 4.725775] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.732540] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.739739] usb usb1: Product: EHCI Host Controller [ 4.744600] usb usb1: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 ehci_hcd [ 4.751539] usb usb1: SerialNumber: 0000:00:1a.7 [ 4.756227] usb usb1: configuration #1 chosen from 1 choice [ 4.761858] hub 1-0:1.0: USB hub found [ 4.765599] hub 1-0:1.0: 6 ports detected [ 4.768033] ata3: SATA link down (SStatus 4 SControl 300) [ 4.768057] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.768077] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.768092] ata4: SATA link down (SStatus 4 SControl 300) [ 4.768110] ata6: SATA link down (SStatus 0 SControl 300) [ 4.794949] ata2.00: ATAPI: PLDS DVD+/-RW DH-16AAS, JD12, max UDMA/100, ATAPI AN [ 4.794972] ata1.00: ATA-8: ST3500418AS, CC44, max UDMA/133 [ 4.794974] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.807483] ata2.00: configured for UDMA/100 [ 4.821927] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.829048] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.834331] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 4.834360] ata1.00: configured for UDMA/133 [ 4.834443] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC44 PQ: 0 ANSI: 5 [ 4.834660] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.834735] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 4.834769] sd 0:0:0:0: [sda] Write Protect is off [ 4.834787] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.837133] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DH-16AAS JD12 PQ: 0 ANSI: 5 [ 4.892523] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.897055] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.897076] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000 [ 4.901048] sda: sda1 sda2 sda3 sda4 < [ 4.908017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 4.908037] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.908039] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.908040] usb usb2: Product: EHCI Host Controller [ 4.908041] usb usb2: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 ehci_hcd [ 4.908043] usb usb2: SerialNumber: 0000:00:1d.7 [ 4.908107] usb usb2: configuration #1 chosen from 1 choice [ 4.908152] hub 2-0:1.0: USB hub found [ 4.908156] hub 2-0:1.0: 6 ports detected [ 4.908236] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.908269] uhci_hcd: USB Universal Host Controller Interface driver [ 4.908330] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.908338] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 4.908384] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 4.908390] uhci_hcd 0000:00:1a.0: detected 2 ports [ 4.908422] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20 [ 4.908456] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.908458] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.908460] usb usb3: Product: UHCI Host Controller [ 4.908461] usb usb3: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 4.908462] usb usb3: SerialNumber: 0000:00:1a.0 [ 4.908516] usb usb3: configuration #1 chosen from 1 choice [ 4.908561] hub 3-0:1.0: USB hub found [ 4.908566] hub 3-0:1.0: 2 ports detected [ 4.908613] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.908619] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 4.908669] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 4.908675] uhci_hcd 0000:00:1a.1: detected 2 ports [ 4.908709] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00 [ 4.908742] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.908744] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.908745] usb usb4: Product: UHCI Host Controller [ 4.908746] usb usb4: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 4.908748] usb usb4: SerialNumber: 0000:00:1a.1 [ 4.908802] usb usb4: configuration #1 chosen from 1 choice [ 4.908847] hub 4-0:1.0: USB hub found [ 4.908852] hub 4-0:1.0: 2 ports detected [ 4.908898] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 4.908905] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 4.908949] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 4.908956] uhci_hcd 0000:00:1a.2: detected 2 ports [ 4.908980] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00 [ 4.909012] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.909013] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.909015] usb usb5: Product: UHCI Host Controller [ 4.909016] usb usb5: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 4.909018] usb usb5: SerialNumber: 0000:00:1a.2 [ 4.909072] usb usb5: configuration #1 chosen from 1 choice [ 4.909116] hub 5-0:1.0: USB hub found [ 4.909121] hub 5-0:1.0: 2 ports detected [ 4.909166] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.909174] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.909217] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 4.909223] uhci_hcd 0000:00:1d.0: detected 2 ports [ 4.909247] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80 [ 4.909279] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.909280] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.909282] usb usb6: Product: UHCI Host Controller [ 4.909283] usb usb6: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 4.909285] usb usb6: SerialNumber: 0000:00:1d.0 [ 4.909339] usb usb6: configuration #1 chosen from 1 choice [ 4.909384] hub 6-0:1.0: USB hub found [ 4.909389] hub 6-0:1.0: 2 ports detected [ 4.909437] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.909444] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.909486] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 4.909493] uhci_hcd 0000:00:1d.1: detected 2 ports [ 4.909517] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60 [ 4.909552] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.909554] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.909555] usb usb7: Product: UHCI Host Controller [ 4.909557] usb usb7: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 4.909558] usb usb7: SerialNumber: 0000:00:1d.1 [ 4.909614] usb usb7: configuration #1 chosen from 1 choice [ 4.909658] hub 7-0:1.0: USB hub found [ 4.909662] hub 7-0:1.0: 2 ports detected [ 4.909710] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.909717] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.909761] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 4.909767] uhci_hcd 0000:00:1d.2: detected 2 ports [ 4.909802] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 4.909844] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.909845] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.909847] usb usb8: Product: UHCI Host Controller [ 4.909848] usb usb8: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 4.909849] usb usb8: SerialNumber: 0000:00:1d.2 [ 4.909905] usb usb8: configuration #1 chosen from 1 choice [ 4.909952] hub 8-0:1.0: USB hub found [ 4.909957] hub 8-0:1.0: 2 ports detected [ 4.910058] usbcore: registered new interface driver usblp [ 4.910060] Initializing USB Mass Storage driver... [ 4.910105] usbcore: registered new interface driver usb-storage [ 4.910107] USB Mass Storage support registered. [ 4.910153] usbcore: registered new interface driver libusual [ 4.910262] PNP: No PS/2 controller found. Probing ports directly. [ 4.912836] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.912841] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.912894] mice: PS/2 mouse device common for all mice [ 4.912994] rtc_cmos 00:05: RTC can wake from S4 [ 4.913041] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 4.913072] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs [ 4.913109] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.913185] cpuidle: using governor ladder [ 4.913186] cpuidle: using governor menu [ 4.913933] usbcore: registered new interface driver hiddev [ 4.913965] usbcore: registered new interface driver usbhid [ 4.913966] usbhid: v2.6:USB HID core driver [ 4.913985] Netfilter messages via NETLINK v0.30. [ 4.913997] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 4.914140] ctnetlink v0.93: registering with nfnetlink. [ 4.914224] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.914243] TCP cubic registered [ 4.914244] Initializing XFRM netlink socket [ 4.914409] NET: Registered protocol family 10 [ 4.914578] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 4.914594] IPv6 over IPv4 tunneling driver [ 4.914696] NET: Registered protocol family 17 [ 4.914811] RPC: Registered udp transport module. [ 4.914813] RPC: Registered tcp transport module. [ 5.570876] sda5 [ 5.570912] Uniform CD-ROM driver Revision: 3.20 [ 5.577735] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.605284] sda6 > [ 5.608088] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.656996] EXT3-fs: INFO: recovery required on readonly filesystem. [ 5.663331] EXT3-fs: write access will be enabled during recovery. [ 5.779108] kjournald starting. Commit interval 5 seconds [ 5.779122] EXT3-fs: recovery complete. [ 5.788609] EXT3-fs: mounted filesystem with writeback data mode. [ 5.794734] VFS: Mounted root (ext3 filesystem) readonly on device 8:3. [ 5.801345] Freeing unused kernel memory: 432k freed [ 6.097512] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 6.297869] usb 5-1: New USB device found, idVendor=413c, idProduct=2101 [ 6.304566] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.311678] usb 5-1: Product: Dell Smart Card Reader Keyboard [ 6.317403] usb 5-1: Manufacturer: Dell [ 6.321353] usb 5-1: configuration #1 chosen from 1 choice [ 6.333114] input: Dell Dell Smart Card Reader Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input0 [ 6.344140] generic-usb 0003:413C:2101.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell Dell Smart Card Reader Keyboard] on usb-0000:00:1a.2-1/input0 [ 6.596514] usb 5-2: new low speed USB device using uhci_hcd and address 3 [ 6.772819] usb 5-2: New USB device found, idVendor=0461, idProduct=4d51 [ 6.779516] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 6.786631] usb 5-2: Product: DELL Laser Mouse [ 6.791184] usb 5-2: configuration #1 chosen from 1 choice [ 6.813060] input: DELL Laser Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input1 [ 6.822433] generic-usb 0003:0461:4D51.0002: input,hidraw1: USB HID v1.11 Mouse [DELL Laser Mouse] on usb-0000:00:1a.2-2/input0 [ 55.052934] NMI watchdog detected timer latency above 100 us [ 55.052934] on CPU0, ip ffffffff8106f212, registers: [ 55.052934] CPU 0 [ 55.052934] Modules linked in: 8139too [ 55.052934] Pid: 357, comm: gatekeeper/0 Not tainted 2.6.31.1-xenomai-i2.4-06 #3 OptiPlex 960 [ 55.052934] RIP: 0010:[<ffffffff8106f212>] [<ffffffff8106f212>] __virq_end+0x56/0xe0 [ 55.052934] RSP: 0018:ffff880126dcfc90 EFLAGS: 00000086 [ 55.052934] RAX: ffff880028033718 RBX: 0000000000000187 RCX: ffffffff81744d00 [ 55.052934] RDX: ffff880028030550 RSI: ffffffd1bb1b7b38 RDI: 0000000000000001 [ 55.052934] RBP: ffffffff8173b600 R08: 0000000000006340 R09: 0000000000000639 [ 55.052934] R10: ffffffff8106f1b6 R11: 0000000000000006 R12: 0000000000000008 [ 55.052934] R13: 000000000000e550 R14: 0000000000000006 R15: 0000000000000000 [ 55.052934] FS: 0000000000000000(0000) GS:ffff880028022000(0000) knlGS:0000000000000000 [ 55.052934] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 55.052934] CR2: 00007f608117b188 CR3: 0000000121973000 CR4: 00000000000406f0 [ 55.052934] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 55.052934] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 55.052934] I-pipe domain Xenomai [ 55.052934] Stack: [ 55.052934] 0000000000000286 ffffffff81009cb6 0000000000000000 ffffffffffffffff [ 55.052934] <0> ffffffff8173b608 0000000000000030 0000018081079a13 000000000000e550 [ 55.052934] <0> 00000000000127b0 000000000000cda0 0000000000000001 ffffffff8173b600 [ 55.052934] Call Trace: [ 55.505012] [<ffffffff81009cb6>] ? __switch_to+0x16e/0x1f2 [ 55.505012] [<ffffffff8106f50f>] ? ipipe_suspend_domain+0x92/0xcb [ 55.513011] [<ffffffff8106f5dc>] ? __ipipe_walk_pipeline+0x94/0xee [ 55.513011] [<ffffffff8101ea11>] ? __ipipe_handle_irq+0xbb/0x257 [ 55.529010] [<ffffffff8101ee36>] ? ipipe_trigger_irq+0x4e/0x65 [ 55.529010] [<ffffffff8108224f>] ? rpi_pop+0xc9/0x103 [ 55.529010] [<ffffffff81082618>] ? gatekeeper_thread+0x16e/0x182 [ 55.529010] [<ffffffff810309e6>] ? default_wake_function+0x0/0xe [ 55.529010] [<ffffffff810824aa>] ? gatekeeper_thread+0x0/0x182 [ 55.529010] [<ffffffff810824aa>] ? gatekeeper_thread+0x0/0x182 [ 55.561010] [<ffffffff81045d41>] ? kthread+0x88/0x90 [ 55.561010] [<ffffffff8100c51a>] ? child_rip+0xa/0x20 [ 55.561010] [<ffffffff81045cb9>] ? kthread+0x0/0x90 [ 55.561010] [<ffffffff8100c510>] ? child_rip+0x0/0x20 [ 55.561010] Code: c1 e0 06 48 8b 74 28 18 ff 54 05 10 48 63 45 00 48 69 c0 98 10 00 00 65 48 8b 14 25 a0 cb 00 00 4c 01 ea 48 8d 04 02 0f ba 28 01 <fa> 65 48 8b 04 25 a0 cb 00 00 48 8b 54 24 38 48 8b 7c 24 40 48 [ 55.561010] ---[ end trace 8bf32139b6d11c7d ]--- [ 55.561010] Kernel panic - not syncing: Non maskable interrupt [ 55.561010] Pid: 357, comm: gatekeeper/0 Tainted: G D 2.6.31.1-xenomai-i2.4-06 #3 [ 55.561010] Call Trace: [ 55.625012] <NMI> [<ffffffff81420dbe>] ? panic+0x78/0x11c [ 55.625012] [<ffffffff8106fac5>] ? __ipipe_unstall_root+0x2f/0x30 [ 55.625012] [<ffffffff81423e69>] ? die_nmi+0xa3/0x10f [ 55.625012] [<ffffffff8134b2ad>] ? rthal_latency_above_max+0x38/0x42 [ 55.625012] [<ffffffff8142418b>] ? p6_rearm+0x10/0x34 [ 55.625012] [<ffffffff8142526b>] ? notifier_call_chain+0x2e/0x5b [ 55.625012] [<ffffffff8134b5fc>] ? rthal_nmi_watchdog_tick+0x64/0x112 [ 55.625012] [<ffffffff814239d4>] ? do_nmi+0xd6/0x2b4 [ 55.625012] [<ffffffff8142348a>] ? nmi+0x1a/0x20 [ 55.625012] [<ffffffff8106f1b6>] ? __xirq_end+0x7e/0x84 [ 55.625012] [<ffffffff8106f212>] ? __virq_end+0x56/0xe0 [ 55.625012] <<EOE>> [<ffffffff81009cb6>] ? __switch_to+0x16e/0x1f2 [ 55.625012] [<ffffffff8106f50f>] ? ipipe_suspend_domain+0x92/0xcb [ 55.625012] [<ffffffff8106f5dc>] ? __ipipe_walk_pipeline+0x94/0xee [ 55.625012] [<ffffffff8101ea11>] ? __ipipe_handle_irq+0xbb/0x257 [ 55.625012] [<ffffffff8101ee36>] ? ipipe_trigger_irq+0x4e/0x65 [ 55.625012] [<ffffffff8108224f>] ? rpi_pop+0xc9/0x103 [ 55.625012] [<ffffffff81082618>] ? gatekeeper_thread+0x16e/0x182 [ 55.625012] [<ffffffff810309e6>] ? default_wake_function+0x0/0xe [ 55.625012] [<ffffffff810824aa>] ? gatekeeper_thread+0x0/0x182 [ 55.625012] [<ffffffff810824aa>] ? gatekeeper_thread+0x0/0x182 [ 55.625012] [<ffffffff81045d41>] ? kthread+0x88/0x90 [ 55.625012] [<ffffffff8100c51a>] ? child_rip+0xa/0x20 [ 55.753012] [<ffffffff81045cb9>] ? kthread+0x0/0x90 [ 55.753012] [<ffffffff8100c510>] ? child_rip+0x0/0x20 [ 55.753012] [drm:intelfb_panic] *ERROR* panic occurred, switching back to text console ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [Xenomai-help] Freeze on SMP x86-64 2009-10-06 13:18 ` Roman Pisl @ 2009-10-06 13:56 ` Jan Kiszka 2009-10-06 14:50 ` Roman Pisl ` (2 more replies) 0 siblings, 3 replies; 19+ messages in thread From: Jan Kiszka @ 2009-10-06 13:56 UTC (permalink / raw) To: Roman Pisl; +Cc: xenomai Roman Pisl wrote: > ... >> >> Is there a chance to grab the panic log via serial line? The first of >> your two screenshots indicate that there might have happened something >> interesting before the NMI triggered, but it's scrolled out of sight. >> >> Jan >> > > Hello, > here I send kernel panic (triggered by rt_task_sleep and latency test) > grabbed via serial line. Hmm, still only NMI alarms... > > I'm ready to help with resolving this issue. Could you try enabling the I-pipe tracer with function tracing? It should dump a trace of the functions that were executed before the watchdog triggered. You may need to extend the number of tracepoints a bit, try "echo 1000 > /proc/ipipe/trace/back_trace_points". Jan -- Siemens AG, Corporate Technology, CT SE 2 Corporate Competence Center Embedded Linux ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [Xenomai-help] Freeze on SMP x86-64 2009-10-06 13:56 ` Jan Kiszka @ 2009-10-06 14:50 ` Roman Pisl 2009-10-06 15:33 ` Roman Pisl 2009-10-06 15:45 ` Roman Pisl 2 siblings, 0 replies; 19+ messages in thread From: Roman Pisl @ 2009-10-06 14:50 UTC (permalink / raw) To: Jan Kiszka; +Cc: xenomai On 6.10.2009 15:56, Jan Kiszka wrote: > Roman Pisl wrote: >> ... >>> >>> Is there a chance to grab the panic log via serial line? The first of >>> your two screenshots indicate that there might have happened something >>> interesting before the NMI triggered, but it's scrolled out of sight. >>> >>> Jan >>> >> >> Hello, >> here I send kernel panic (triggered by rt_task_sleep and latency test) >> grabbed via serial line. > > Hmm, still only NMI alarms... > >> >> I'm ready to help with resolving this issue. > > Could you try enabling the I-pipe tracer with function tracing? It > should dump a trace of the functions that were executed before the > watchdog triggered. You may need to extend the number of tracepoints a > bit, try "echo 1000> /proc/ipipe/trace/back_trace_points". > > Jan > Unfortunately I get no kernel panic when both I-pipe tracer and NMI watchdog are enabled. The machine just totally freezes on both rt_task_sleep and latency test :( I tried serial console, text console, even tried disabling fb. Roman ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [Xenomai-help] Freeze on SMP x86-64 2009-10-06 13:56 ` Jan Kiszka 2009-10-06 14:50 ` Roman Pisl @ 2009-10-06 15:33 ` Roman Pisl 2009-10-06 15:45 ` Roman Pisl 2 siblings, 0 replies; 19+ messages in thread From: Roman Pisl @ 2009-10-06 15:33 UTC (permalink / raw) To: Jan Kiszka; +Cc: xenomai [-- Attachment #1: Type: text/plain, Size: 852 bytes --] On 6.10.2009 15:56, Jan Kiszka wrote: > Roman Pisl wrote: >> ... >>> >>> Is there a chance to grab the panic log via serial line? The first of >>> your two screenshots indicate that there might have happened something >>> interesting before the NMI triggered, but it's scrolled out of sight. >>> >>> Jan >>> >> >> Hello, >> here I send kernel panic (triggered by rt_task_sleep and latency test) >> grabbed via serial line. > > Hmm, still only NMI alarms... > >> >> I'm ready to help with resolving this issue. > > Could you try enabling the I-pipe tracer with function tracing? It > should dump a trace of the functions that were executed before the > watchdog triggered. You may need to extend the number of tracepoints a > bit, try "echo 1000> /proc/ipipe/trace/back_trace_points". > > Jan > After trying for a while, I managed to get this. Roman [-- Attachment #2: panic.rt_task_sleep.ipipe --] [-- Type: text/plain, Size: 58566 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31.1-xenomai-i2.4-06 (root@domain.hid) (gcc version 4.4.1 (Gentoo 4.4.1 p1.0) ) #7 SMP Tue Oct 6 17:10:50 CEST 2009 [ 0.000000] Command line: root=/dev/sda3 nmi_watchdog=2 console=ttyS0,115200 kernel.ftrace_dump_on_oops=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cd9ffc00 (usable) [ 0.000000] BIOS-e820: 00000000cd9ffc00 - 00000000cda53c00 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cda53c00 - 00000000cda55c00 (ACPI data) [ 0.000000] BIOS-e820: 00000000cda55c00 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000128000000 (usable) [ 0.000000] DMI 2.5 present. [ 0.000000] last_pfn = 0x128000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xcd9ff max_arch_pfn = 0x400000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cd9ff000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000128000000 [ 0.000000] ACPI: RSDP 00000000000fec00 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000000fc7cb 00074 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: FACP 00000000000fc8fb 000F4 (v03 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: DSDT 00000000ffe9cff8 054AD (v01 DELL dt_ex 00001000 INTL 20050624) [ 0.000000] ACPI: FACS 00000000cd9ffc00 00040 [ 0.000000] ACPI: SSDT 00000000ffea25c4 000AA (v01 DELL st_ex 00001000 INTL 20050624) [ 0.000000] ACPI: APIC 00000000000fc9ef 00092 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: BOOT 00000000000fca81 00028 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: ASF! 00000000000fcaa9 00096 (v32 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: MCFG 00000000000fcb3f 0003E (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: HPET 00000000000fcb7d 00038 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: TCPA 00000000000fcdd9 00032 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: DMAR 00000000000fce0b 00120 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: SLIC 00000000000fcbb5 00176 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0128000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001cfc2d4] TEXT DATA BSS ==> [0001000000 - 0001cfc2d4] [ 0.000000] #3 [000009a000 - 0000100000] BIOS reserved ==> [000009a000 - 0000100000] [ 0.000000] #4 [0001cfd000 - 0001cfd1f0] BRK ==> [0001cfd000 - 0001cfd1f0] [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #6 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00128000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009a [ 0.000000] 0: 0x00000100 -> 0x000cd9ff [ 0.000000] 0: 0x00100000 -> 0x00128000 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] 8 Processors exceeds NR_CPUS limit of 4 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) [ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 1312 pages at ffff88002be00000, static data 5341408 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 989291 [ 0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=2 console=ttyS0,115200 kernel.ftrace_dump_on_oops=1 [ 0.000000] Unknown boot option `kernel.ftrace_dump_on_oops=1': ignoring [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 3859008k/4849664k available (4374k kernel code, 825756k absent, 163992k reserved, 2164k data, 5556k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:384 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2660.246 MHz processor. [ 0.000059] I-pipe 2.4-06: pipeline enabled. [ 0.003119] Console: colour VGA+ 80x25 [ 0.003138] console [ttyS0] enabled [ 0.004000] HPET: 8 timers in total, 4 timers will be used for per-cpu timer [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.49 BogoMIPS (lpj=10640984) [ 0.012036] Mount-cache hash table entries: 256 [ 0.016176] Initializing cgroup subsys ns [ 0.020006] Initializing cgroup subsys cpuacct [ 0.024009] Initializing cgroup subsys freezer [ 0.028013] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.036004] CPU: L2 cache: 3072K [ 0.039208] CPU: Physical Processor ID: 0 [ 0.040004] CPU: Processor Core ID: 0 [ 0.044005] mce: CPU supports 6 MCE banks [ 0.048008] CPU0: Thermal monitoring enabled (TM2) [ 0.052005] Performance Counters: Core2 events, Intel PMU driver. [ 0.061654] ... version: 2 [ 0.064004] ... bit width: 40 [ 0.068004] ... generic counters: 2 [ 0.072004] ... value mask: 000000ffffffffff [ 0.076004] ... max period: 000000007fffffff [ 0.080004] ... fixed-purpose counters: 3 [ 0.084004] ... counter mask: 0000000700000003 [ 0.088015] Freeing SMP alternatives: 36k freed [ 0.092024] ACPI: Core revision 20090521 [ 0.340009] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.344007] ftrace: allocating 21378 entries in 84 pages [ 0.363390] Setting APIC routing to flat [ 0.364326] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.368001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.368001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.368001] ..... (found apic 0 pin 2) ... [ 0.409050] ....... works. [ 0.411737] CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.420001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5319.90 BogoMIPS (lpj=10639816) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.509450] CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.517228] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.520090] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 5319.93 BogoMIPS (lpj=10639868) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU2: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.617633] CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.628007] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.632071] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 5319.92 BogoMIPS (lpj=10639858) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU3: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.729440] CPU3: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.737227] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.740018] Brought up 4 CPUs [ 0.744006] Total of 4 processors activated (21280.26 BogoMIPS). [ 0.748040] Testing NMI watchdog ... OK. [ 0.836521] NET: Registered protocol family 16 [ 0.844233] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.848027] ACPI: bus type pci registered [ 0.852026] PCI: Using configuration type 1 for base access [ 0.900308] bio: create slab <bio-0> at 0 [ 1.053800] ACPI: BIOS _OSI(Linux) query ignored [ 1.103303] ACPI: Interpreter enabled [ 1.104020] ACPI: (supports S0 S5) [ 1.108665] ACPI: Using IOAPIC for interrupt routing [ 1.316858] ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 7F 20090521 tbutils-246 [ 1.333260] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 1.352061] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.357248] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.360036] pci 0000:00:03.0: PME# disabled [ 1.365474] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 1.368031] pci 0000:00:19.0: PME# disabled [ 1.373311] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.376029] pci 0000:00:1a.7: PME# disabled [ 1.380366] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.384032] pci 0000:00:1b.0: PME# disabled [ 1.388268] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.392028] pci 0000:00:1c.0: PME# disabled [ 1.396265] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.400032] pci 0000:00:1c.1: PME# disabled [ 1.409378] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.412032] pci 0000:00:1d.7: PME# disabled [ 1.420740] pci 0000:00:1f.2: PME# supported from D3hot [ 1.424028] pci 0000:00:1f.2: PME# disabled [ 1.429294] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot [ 1.432029] pci 0000:03:00.0: PME# disabled [ 1.436365] pci 0000:03:02.0: PME# supported from D1 D2 D3hot D3cold [ 1.440029] pci 0000:03:02.0: PME# disabled [ 1.444276] pci 0000:00:1e.0: transparent bridge [ 3.828482] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 3.837335] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 3.845942] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 3.855050] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 3.863883] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 3.869834] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 3.878767] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 3.887626] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 3.892765] SCSI subsystem initialized [ 3.896636] usbcore: registered new interface driver usbfs [ 3.900146] usbcore: registered new interface driver hub [ 3.904110] usbcore: registered new device driver usb [ 3.912134] PCI: Using ACPI for IRQ routing [ 3.968087] pnp: PnP ACPI init [ 3.971183] ACPI: bus type pnp registered [ 4.068187] pnp: PnP ACPI: found 9 devices [ 4.072315] ACPI: ACPI bus type pnp unregistered [ 4.076998] system 00:01: ioport range 0x800-0x85f has been reserved [ 4.083381] system 00:01: ioport range 0xc00-0xc7f has been reserved [ 4.089760] system 00:01: ioport range 0x860-0x8ff has been reserved [ 4.104192] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 4.110134] pci 0000:00:1c.0: IO window: disabled [ 4.115048] pci 0000:00:1c.0: MEM window: 0xfe500000-0xfe5fffff [ 4.121168] pci 0000:00:1c.0: PREFETCH window: disabled [ 4.126595] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 4.132535] pci 0000:00:1c.1: IO window: disabled [ 4.137448] pci 0000:00:1c.1: MEM window: 0xfe400000-0xfe4fffff [ 4.143570] pci 0000:00:1c.1: PREFETCH window: disabled [ 4.149000] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 4.154948] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 4.160294] pci 0000:00:1e.0: MEM window: 0xfe300000-0xfe3fffff [ 4.166416] pci 0000:00:1e.0: PREFETCH window: disabled [ 4.171877] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.178656] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.185650] NET: Registered protocol family 2 [ 4.190148] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 4.198020] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 4.207033] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 4.214177] TCP: Hash tables configured (established 262144 bind 65536) [ 4.220813] TCP reno registered [ 4.224294] NET: Registered protocol family 1 [ 4.229449] Simple Boot Flag at 0x7a set to 0x1 [ 4.242939] audit: initializing netlink socket (disabled) [ 4.248500] type=2000 audit(1254849243.245:1): initialized [ 4.259383] I-pipe: Domain Xenomai registered. [ 4.264174] Xenomai: hal/x86_64 started. [ 4.268201] Xenomai: scheduling class idle registered. [ 4.273381] Xenomai: scheduling class rt registered. [ 4.292942] Xenomai: real-time nucleus v2.5-rc3 (Flying In A Blue Dream) loaded. [ 4.301131] Xenomai: NMI watchdog started (threshold=100 us). [ 4.307024] I-pipe: Detected stalled topmost domain, probably caused by a bug. [ 4.307026] A critical section may have been left unterminated. [ 4.310892] Pid: 1, comm: swapper Not tainted 2.6.31.1-xenomai-i2.4-06 #7 [ 4.327586] Call Trace: [ 4.330028] <NMI> [<ffffffff8107e122>] ipipe_check_context+0x1f1/0x203 [ 4.336733] [<ffffffff8144037a>] do_nmi+0x44/0x2ac [ 4.341602] [<ffffffff8143ff2a>] nmi+0x1a/0x20 [ 4.346125] [<ffffffff810819ad>] ? __ipipe_trace+0x23d/0x681 [ 4.351855] <<EOE>> [<ffffffff810a7569>] ? ipipe_restore_pipeline_head+0x7/0x6b [ 4.359346] [<ffffffff810824ae>] ipipe_trace_function+0x1c/0x1e [ 4.365338] [<ffffffff8100afd6>] ftrace_call+0x5/0x2b [ 4.370464] [<ffffffff810a756e>] ? ipipe_restore_pipeline_head+0xc/0x6b [ 4.377149] [<ffffffff810a75f0>] xnlock_put_irqrestore+0x23/0x25 [ 4.383228] [<ffffffff810a798c>] xnshadow_register_interface+0x68/0x9d [ 4.389828] [<ffffffff810ae0c7>] __native_syscall_init+0x15/0x3b [ 4.395906] [<ffffffff810aca31>] __native_skin_init+0x1fc/0x263 [ 4.401899] [<ffffffff810ac835>] ? __native_skin_init+0x0/0x263 [ 4.407891] [<ffffffff810ac835>] ? __native_skin_init+0x0/0x263 [ 4.413884] [<ffffffff81009069>] do_one_initcall+0x5e/0x17d [ 4.419530] [<ffffffff81b7c795>] kernel_init+0x16e/0x1c4 [ 4.424917] [<ffffffff8100c9ba>] child_rip+0xa/0x20 [ 4.429872] [<ffffffff81b7c627>] ? kernel_init+0x0/0x1c4 [ 4.435259] [<ffffffff8100c9b0>] ? child_rip+0x0/0x20 [ 4.440385] I-pipe tracer log (100 points): [ 4.444559] | *+func 0 xnlock_put_irqrestore+0x4 (xnshadow_register_interface+0x68) [ 4.454141] | *+func 0 __xnlock_get+0x4 (__xnlock_get_irqsave+0x23) [ 4.462339] | +begin 0x80000000 0 ipipe_test_and_stall_pipeline_head+0x20 (__xnlock_get_irqsave+0x17) [ 4.472533] +func 0 ipipe_test_and_stall_pipeline_head+0x9 (__xnlock_get_irqsave+0x17) [ 4.482629] +func -1 __xnlock_get_irqsave+0x9 (xnshadow_register_interface+0x31) [ 4.492141] +func -1 xnshadow_register_interface+0xd (__native_syscall_init+0x15) [ 4.501721] +func -1 __native_syscall_init+0x4 (__native_skin_init+0x1fc) [ 4.510608] +func -1 __native_alarm_pkg_init+0x4 (__native_skin_init+0x1f1) [ 4.519674] +func -1 __native_heap_pkg_init+0x4 (__native_skin_init+0x1e6) [ 4.528664] +func -2 __native_queue_pkg_init+0x4 (__native_skin_init+0x1db) [ 4.537730] +func -7 __native_pipe_pkg_init+0x4 (__native_skin_init+0x1d0) [ 4.546701] +func -8 __native_cond_pkg_init+0x4 (__native_skin_init+0x1c5) [ 4.555679] +func -8 __native_mutex_pkg_init+0x4 (__native_skin_init+0x1ba) [ 4.564753] +func -8 __native_event_pkg_init+0x4 (__native_skin_init+0x1ab) [ 4.573820] +func -8 __native_sem_pkg_init+0x4 (__native_skin_init+0x19c) [ 4.582700] | +end 0x80000000 -9 __ipipe_restore_pipeline_head+0xfa (ipipe_restore_pipeline_head+0x66) [ 4.593074] | *+func -9 __ipipe_restore_pipeline_head+0x7 (ipipe_restore_pipeline_head+0x66) [ 4.603343] | *+func -9 ipipe_restore_pipeline_head+0x7 (T.622+0x24) [ 4.611548] | *+func -9 T.622+0x4 (xnpod_add_hook+0x8f) [ 4.618621] | *+func -10 xnlock_put_irqrestore+0x7 (xnheap_alloc+0x175) [ 4.626994] | *+func -10 get_free_range+0xd (xnheap_alloc+0xae) [ 4.634674] | *+func -11 __xnlock_get_irqsave+0x7 (xnheap_alloc+0x89) [ 4.642875] | *+func -11 xnheap_alloc+0x11 (xnpod_add_hook+0x64) [ 4.650641] | +begin 0x80000000 -12 ipipe_test_and_stall_pipeline_head+0x20 (T.625+0xe) [ 4.659447] +func -12 ipipe_test_and_stall_pipeline_head+0x9 (T.625+0xe) [ 4.668174] +func -12 T.625+0x4 (xnpod_add_hook+0x1a) [ 4.675232] +func -12 xnpod_add_hook+0xb (__native_task_pkg_init+0x1a) [ 4.683782] +func -12 __native_task_pkg_init+0x4 (__native_skin_init+0x18d) [ 4.692773] +func -17 cpumask_weight+0x4 (xnpod_enable_timesource+0x120) [ 4.701491] | +end 0x80000000 -17 __ipipe_restore_pipeline_head+0xfa (ipipe_restore_pipeline_head+0x66) [ 4.711846] | *+func -18 __ipipe_restore_pipeline_head+0x7 (ipipe_restore_pipeline_head+0x66) [ 4.722134] | *+func -18 ipipe_restore_pipeline_head+0x7 (T.622+0x24) [ 4.730332] | *+func -18 T.622+0x4 (xnpod_enable_timesource+0x116) [ 4.738273] | *+func -18 _flat_send_IPI_mask+0x11 (flat_send_IPI_mask+0x11) [ 4.746987] | *+func -18 flat_send_IPI_mask+0x4 (__ipipe_send_ipi+0x84) [ 4.755360] | *+func -19 T.421+0x4 (__ipipe_send_ipi+0x68) [ 4.762609] | *+func -19 __ipipe_send_ipi+0x11 (ipipe_send_ipi+0xe) [ 4.770636] | *+func -19 ipipe_send_ipi+0x4 (xntimer_next_remote_shot+0x30) [ 4.779354] | *+func -19 xntimer_next_remote_shot+0x4 (xntimer_start_aperiodic+0x123) [ 4.788950] | *+func -19 xntimer_enqueue_aperiodic+0x4 (xntimer_start_aperiodic+0xc6) [ 4.798532] | *+func -19 xnarch_ns_to_tsc+0x4 (xntimer_start_aperiodic+0x6f) [ 4.807330] | *+func -20 xntimer_start_aperiodic+0xb (xntimer_start+0xe) [ 4.815794] | *+func -20 xntimer_start+0x4 (xnpod_enable_timesource+0x10e) [ 4.824435] | +begin 0x80000000 -20 ipipe_test_and_stall_pipeline_head+0x20 (T.625+0xe) [ 4.833238] +func -20 ipipe_test_and_stall_pipeline_head+0x9 (T.625+0xe) [ 4.841955] +func -20 T.625+0x4 (xnpod_enable_timesource+0xdb) [ 4.849813] | +end 0x80000001 -21 ipipe_critical_exit+0x76 (ipipe_request_tickdev+0x110) [ 4.858868] | +func -21 T.421+0x4 (ipipe_critical_exit+0x4b) [ 4.866378] | +func -21 T.421+0x4 (ipipe_critical_exit+0x4b) [ 4.873889] | +func -22 ipipe_critical_exit+0x9 (ipipe_request_tickdev+0x110) [ 4.882862] | +func -22 __ipipe_check_lapic+0x4 (__ipipe_check_tickdev+0x25) [ 4.891754] | +func -22 __ipipe_check_tickdev+0x4 (ipipe_request_tickdev+0x8e) [ 4.900830] | +func -42 __default_send_IPI_shortcut+0x11 (flat_send_IPI_allbutself+0x8f) [ 4.910759] | +func -42 flat_send_IPI_allbutself+0x9 (ipipe_critical_enter+0xa5) [ 4.919990] | +begin 0x80000001 -43 ipipe_critical_enter+0x21 (ipipe_request_tickdev+0x30) [ 4.929066] +func -43 ipipe_critical_enter+0x7 (ipipe_request_tickdev+0x30) [ 4.938044] +func -43 ipipe_request_tickdev+0x11 (rthal_timer_request+0x6c) [ 4.947017] +func -43 rthal_timer_request+0xd (xnpod_enable_timesource+0xba) [ 4.956092] +func -43 cpumask_weight+0x4 (xnpod_enable_timesource+0x120) [ 4.964809] | +end 0x80000000 -43 __ipipe_restore_pipeline_head+0xfa (ipipe_restore_pipeline_head+0x66) [ 4.975165] | *+func -44 __ipipe_restore_pipeline_head+0x7 (ipipe_restore_pipeline_head+0x66) [ 4.985455] | *+func -44 ipipe_restore_pipeline_head+0x7 (T.622+0x24) [ 4.993660] | *+func -44 T.622+0x4 (xnpod_enable_timesource+0x116) [ 5.001606] | *+func -44 _flat_send_IPI_mask+0x11 (flat_send_IPI_mask+0x11) [ 5.010320] | *+func -44 flat_send_IPI_mask+0x4 (__ipipe_send_ipi+0x84) [ 5.018691] | *+func -44 T.421+0x4 (__ipipe_send_ipi+0x68) [ 5.025944] | *+func -45 __ipipe_send_ipi+0x11 (ipipe_send_ipi+0xe) [ 5.033965] | *+func -45 ipipe_send_ipi+0x4 (xntimer_next_remote_shot+0x30) [ 5.042691] | *+func -45 xntimer_next_remote_shot+0x4 (xntimer_start_aperiodic+0x123) [ 5.052283] | *+func -45 xntimer_enqueue_aperiodic+0x4 (xntimer_start_aperiodic+0xc6) [ 5.061868] | *+func -45 xnarch_ns_to_tsc+0x4 (xntimer_start_aperiodic+0x6f) [ 5.070671] | *+func -45 xntimer_start_aperiodic+0xb (xntimer_start+0xe) [ 5.079129] | *+func -46 xntimer_start+0x4 (xnpod_enable_timesource+0x10e) [ 5.087764] | +begin 0x80000000 -46 ipipe_test_and_stall_pipeline_head+0x20 (T.625+0xe) [ 5.096584] +func -46 ipipe_test_and_stall_pipeline_head+0x9 (T.625+0xe) [ 5.105302] +func -46 T.625+0x4 (xnpod_enable_timesource+0xdb) [ 5.113154] | +end 0x80000001 -46 ipipe_critical_exit+0x76 (ipipe_request_tickdev+0x110) [ 5.122220] | +func -47 T.421+0x4 (ipipe_critical_exit+0x4b) [ 5.129723] | +func -47 T.421+0x4 (ipipe_critical_exit+0x4b) [ 5.137230] | +func -47 ipipe_critical_exit+0x9 (ipipe_request_tickdev+0x110) [ 5.146207] | +func -47 __ipipe_check_lapic+0x4 (__ipipe_check_tickdev+0x25) [ 5.155092] | +func -48 __ipipe_check_tickdev+0x4 (ipipe_request_tickdev+0x8e) [ 5.164168] | +func -68 __default_send_IPI_shortcut+0x11 (flat_send_IPI_allbutself+0x8f) [ 5.174098] | +func -72 flat_send_IPI_allbutself+0x9 (ipipe_critical_enter+0xa5) [ 5.183328] | +begin 0x80000001 -72 ipipe_critical_enter+0x21 (ipipe_request_tickdev+0x30) [ 5.192409] +func -73 ipipe_critical_enter+0x7 (ipipe_request_tickdev+0x30) [ 5.201387] +func -73 ipipe_request_tickdev+0x11 (rthal_timer_request+0x6c) [ 5.210365] +func -73 rthal_timer_request+0xd (xnpod_enable_timesource+0xba) [ 5.219422] +func -73 cpumask_weight+0x4 (xnpod_enable_timesource+0x120) [ 5.228158] | +end 0x80000000 -73 __ipipe_restore_pipeline_head+0xfa (ipipe_restore_pipeline_head+0x66) [ 5.238521] | *+func -73 __ipipe_restore_pipeline_head+0x7 (ipipe_restore_pipeline_head+0x66) [ 5.248802] | *+func -74 ipipe_restore_pipeline_head+0x7 (T.622+0x24) [ 5.256999] | *+func -74 T.622+0x4 (xnpod_enable_timesource+0x116) [ 5.264942] | *+func -74 _flat_send_IPI_mask+0x11 (flat_send_IPI_mask+0x11) [ 5.273660] | *+func -74 flat_send_IPI_mask+0x4 (__ipipe_send_ipi+0x84) [ 5.282028] | *+func -74 T.421+0x4 (__ipipe_send_ipi+0x68) [ 5.289276] | *+func -74 __ipipe_send_ipi+0x11 (ipipe_send_ipi+0xe) [ 5.297305] | *+func -75 ipipe_send_ipi+0x4 (xntimer_next_remote_shot+0x30) [ 5.306023] | *+func -75 xntimer_next_remote_shot+0x4 (xntimer_start_aperiodic+0x123) [ 5.315599] | *+func -75 xntimer_enqueue_aperiodic+0x4 (xntimer_start_aperiodic+0xc6) [ 5.324917] ------------[ cut here ]------------ [ 5.329797] WARNING: at include/linux/ipipe.h:570 ipipe_test_foreign_stack+0x3c/0xb2() [ 5.337692] Hardware name: OptiPlex 960 [ 5.342988] Modules linked in: [ 5.345860] Pid: 1, comm: swapper Not tainted 2.6.31.1-xenomai-i2.4-06 #7 [ 5.352812] Call Trace: [ 5.352812] <NMI> [<ffffffff8103caa9>] warn_slowpath_common+0x7c/0x94 [ 5.361862] [<ffffffff8103cad5>] warn_slowpath_null+0x14/0x16 [ 5.367680] [<ffffffff8100d518>] ipipe_test_foreign_stack+0x3c/0xb2 [ 5.374017] [<ffffffff81440593>] do_nmi+0x25d/0x2ac [ 5.378969] [<ffffffff8143ff2a>] nmi+0x1a/0x20 [ 5.383488] [<ffffffff810819ad>] ? __ipipe_trace+0x23d/0x681 [ 5.389221] <<EOE>> [<ffffffff810a7569>] ? ipipe_restore_pipeline_head+0x7/0x6b [ 5.396695] [<ffffffff810824ae>] ipipe_trace_function+0x1c/0x1e [ 5.402687] [<ffffffff8100afd6>] ftrace_call+0x5/0x2b [ 5.407812] [<ffffffff810a756e>] ? ipipe_restore_pipeline_head+0xc/0x6b [ 5.414495] [<ffffffff810a75f0>] xnlock_put_irqrestore+0x23/0x25 [ 5.420571] [<ffffffff810a798c>] xnshadow_register_interface+0x68/0x9d [ 5.427168] [<ffffffff810ae0c7>] __native_syscall_init+0x15/0x3b [ 5.433245] [<ffffffff810aca31>] __native_skin_init+0x1fc/0x263 [ 5.439234] [<ffffffff810ac835>] ? __native_skin_init+0x0/0x263 [ 5.445224] [<ffffffff810ac835>] ? __native_skin_init+0x0/0x263 [ 5.451214] [<ffffffff81009069>] do_one_initcall+0x5e/0x17d [ 5.456857] [<ffffffff81b7c795>] kernel_init+0x16e/0x1c4 [ 5.462241] [<ffffffff8100c9ba>] child_rip+0xa/0x20 [ 5.467192] [<ffffffff81b7c627>] ? kernel_init+0x0/0x1c4 [ 5.472578] [<ffffffff8100c9b0>] ? child_rip+0x0/0x20 [ 5.477704] ---[ end trace a7919e7f17c0a725 ]--- [ 5.482312] ------------[ cut here ]------------ [ 5.486916] WARNING: at include/linux/ipipe.h:570 ipipe_test_foreign_stack+0x79/0xb2() [ 5.494809] Hardware name: OptiPlex 960 [ 5.500104] Modules linked in: [ 5.500104] Pid: 1, comm: swapper Tainted: G W 2.6.31.1-xenomai-i2.4-06 #7 [ 5.510702] Call Trace: [ 5.513142] <NMI> [<ffffffff8103caa9>] warn_slowpath_common+0x7c/0x94 [ 5.519750] [<ffffffff8103cad5>] warn_slowpath_null+0x14/0x16 [ 5.525568] [<ffffffff8100d555>] ipipe_test_foreign_stack+0x79/0xb2 [ 5.531904] [<ffffffff81440593>] do_nmi+0x25d/0x2ac [ 5.536857] [<ffffffff8143ff2a>] nmi+0x1a/0x20 [ 5.541376] [<ffffffff810819ad>] ? __ipipe_trace+0x23d/0x681 [ 5.547106] <<EOE>> [<ffffffff810a7569>] ? ipipe_restore_pipeline_head+0x7/0x6b [ 5.554583] [<ffffffff810824ae>] ipipe_trace_function+0x1c/0x1e [ 5.560574] [<ffffffff8100afd6>] ftrace_call+0x5/0x2b [ 5.565700] [<ffffffff810a756e>] ? ipipe_restore_pipeline_head+0xc/0x6b [ 5.572384] [<ffffffff810a75f0>] xnlock_put_irqrestore+0x23/0x25 [ 5.578461] [<ffffffff810a798c>] xnshadow_register_interface+0x68/0x9d [ 5.585056] [<ffffffff810ae0c7>] __native_syscall_init+0x15/0x3b [ 5.591132] [<ffffffff810aca31>] __native_skin_init+0x1fc/0x263 [ 5.597122] [<ffffffff810ac835>] ? __native_skin_init+0x0/0x263 [ 5.603112] [<ffffffff810ac835>] ? __native_skin_init+0x0/0x263 [ 5.609102] [<ffffffff81009069>] do_one_initcall+0x5e/0x17d [ 5.614744] [<ffffffff81b7c795>] kernel_init+0x16e/0x1c4 [ 5.620129] [<ffffffff8100c9ba>] child_rip+0xa/0x20 [ 5.625082] [<ffffffff81b7c627>] ? kernel_init+0x0/0x1c4 [ 5.630467] [<ffffffff8100c9b0>] ? child_rip+0x0/0x20 [ 5.635591] ---[ end trace a7919e7f17c0a726 ]--- [ 5.640203] Xenomai: starting native API services. [ 5.644986] Xenomai: starting POSIX services. [ 5.649835] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 5.662796] Installing knfsd (copyright (C) 1996 okir@domain.hid). [ 5.670333] fuse init (API version 7.12) [ 5.674648] msgmni has been set to 7538 [ 5.679509] alg: No test for stdrng (krng) [ 5.683861] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 5.691242] io scheduler noop registered [ 5.695157] io scheduler anticipatory registered [ 5.699764] io scheduler deadline registered [ 5.704037] io scheduler cfq registered (default) [ 5.709850] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.722494] Non-volatile memory driver v1.3 [ 5.726757] Linux agpgart interface v0.103 [ 5.730907] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled ÿ[ 5.992296] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 5.999033] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 6.004803] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6.011883] 0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17) is a 16550A [ 6.022046] brd: module loaded [ 6.026863] loop: module loaded [ 6.030486] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 6.037387] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x2f impl RAID mode [ 6.045546] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems [ 6.080098] scsi0 : ahci [ 6.082941] scsi1 : ahci [ 6.085725] scsi2 : ahci [ 6.088505] scsi3 : ahci [ 6.091280] scsi4 : ahci [ 6.094058] scsi5 : ahci [ 6.098659] ata1: SATA max UDMA/133 abar m2048@domain.hid port 0xff970100 irq 30 [ 6.106041] ata2: SATA max UDMA/133 abar m2048@domain.hid port 0xff970180 irq 30 [ 6.113418] ata3: SATA max UDMA/133 abar m2048@domain.hid port 0xff970200 irq 30 [ 6.120795] ata4: SATA max UDMA/133 abar m2048@domain.hid port 0xff970280 irq 30 [ 6.128170] ata5: DUMMY [ 6.130602] ata6: SATA max UDMA/133 abar m2048@domain.hid port 0xff970380 irq 30 [ 6.138507] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 6.144930] Copyright (c) 1999-2006 Intel Corporation. [ 6.150153] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 6.156058] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 6.161904] e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 6.168852] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb [ 6.284646] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:e8:39:3c:95 [ 6.292023] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 6.298397] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: 2021ff-0ff [ 6.304657] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 [ 6.311341] Copyright (c) 2007-2009 Intel Corporation. [ 6.316566] Intel(R) Virtual Function Network Driver - version 1.0.0-k0 [ 6.323164] Copyright (c) 2009 Intel Corporation. [ 6.327960] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 6.334386] 8139cp 0000:03:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 6.344017] tun: Universal TUN/TAP device driver, 1.6 [ 6.349055] tun: (C) 1999-2004 Max Krasnyansky <maxk@domain.hid> [ 6.355501] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.362042] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 6.369172] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 6.374517] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 6.385808] ehci_hcd 0000:00:1a.7: debug port 1 [ 6.390358] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe6da000 [ 6.408020] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 6.413817] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.420588] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.427792] usb usb1: Product: EHCI Host Controller [ 6.432657] usb usb1: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 ehci_hcd [ 6.439600] usb usb1: SerialNumber: 0000:00:1a.7 [ 6.444344] usb usb1: configuration #1 chosen from 1 choice [ 6.450026] hub 1-0:1.0: USB hub found [ 6.453776] hub 1-0:1.0: 6 ports detected [ 6.456038] ata3: SATA link down (SStatus 4 SControl 300) [ 6.456067] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.456092] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.456112] ata4: SATA link down (SStatus 4 SControl 300) [ 6.456138] ata6: SATA link down (SStatus 0 SControl 300) [ 6.482951] ata2.00: ATAPI: PLDS DVD+/-RW DH-16AAS, JD12, max UDMA/100, ATAPI AN [ 6.482980] ata1.00: ATA-8: ST3500418AS, CC44, max UDMA/133 [ 6.482983] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 6.495489] ata2.00: configured for UDMA/100 [ 6.510076] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4 [ 6.510083] ata2: irq_stat 0x40000001 [ 6.510091] ata2: hard resetting link [ 6.522361] ata1.00: configured for UDMA/133 [ 6.522500] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC44 PQ: 0 ANSI: 5 [ 6.522897] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.523031] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 6.523113] sd 0:0:0:0: [sda] Write Protect is off [ 6.523158] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.562820] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 6.569951] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 6.575271] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 6.586564] ehci_hcd 0000:00:1d.7: debug port 1 [ 6.591115] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000 [ 6.600734] sda: [ 6.608021] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 6.613986] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.620757] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.627959] usb usb2: Product: EHCI Host Controller [ 6.632824] usb usb2: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 ehci_hcd [ 6.639767] usb usb2: SerialNumber: 0000:00:1d.7 [ 6.644430] sda1 sda2 sda3 sda4 < [ 6.647906] usb usb2: configuration #1 chosen from 1 choice [ 6.653565] hub 2-0:1.0: USB hub found [ 6.657314] hub 2-0:1.0: 6 ports detected [ 6.661527] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.667752] uhci_hcd: USB Universal Host Controller Interface driver [ 6.674139] sda5 [ 6.675944] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.683260] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 6.688571] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 6.695955] uhci_hcd 0000:00:1a.0: detected 2 ports [ 6.700863] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20 [ 6.706655] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.713427] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.720629] usb usb3: Product: UHCI Host Controller [ 6.725493] usb usb3: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 6.732436] usb usb3: SerialNumber: 0000:00:1a.0 [ 6.737102] sda6 > [ 6.739375] usb usb3: configuration #1 chosen from 1 choice [ 6.745031] hub 3-0:1.0: USB hub found [ 6.748799] hub 3-0:1.0: 2 ports detected [ 6.752983] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6.757039] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.764756] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 6.770061] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 6.777442] uhci_hcd 0000:00:1a.1: detected 2 ports [ 6.782346] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00 [ 6.788138] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.794909] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.802111] usb usb4: Product: UHCI Host Controller [ 6.806977] usb usb4: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 6.813920] usb usb4: SerialNumber: 0000:00:1a.1 [ 6.818641] usb usb4: configuration #1 chosen from 1 choice [ 6.824330] hub 4-0:1.0: USB hub found [ 6.828080] hub 4-0:1.0: 2 ports detected [ 6.832173] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 6.839300] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 6.844613] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 6.852015] uhci_hcd 0000:00:1a.2: detected 2 ports [ 6.856927] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00 [ 6.862721] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.869491] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.876695] usb usb5: Product: UHCI Host Controller [ 6.881579] usb usb5: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 6.888521] usb usb5: SerialNumber: 0000:00:1a.2 [ 6.893253] usb usb5: configuration #1 chosen from 1 choice [ 6.898922] hub 5-0:1.0: USB hub found [ 6.902670] hub 5-0:1.0: 2 ports detected [ 6.906764] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 6.913890] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 6.919208] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 6.926590] uhci_hcd 0000:00:1d.0: detected 2 ports [ 6.931499] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80 [ 6.937294] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.944065] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.951268] usb usb6: Product: UHCI Host Controller [ 6.956133] usb usb6: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 6.963074] usb usb6: SerialNumber: 0000:00:1d.0 [ 6.967814] usb usb6: configuration #1 chosen from 1 choice [ 6.973491] hub 6-0:1.0: USB hub found [ 6.977240] hub 6-0:1.0: 2 ports detected [ 6.981332] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6.988459] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 6.993778] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 7.001158] uhci_hcd 0000:00:1d.1: detected 2 ports [ 7.006103] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60 [ 7.011900] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.018670] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.025873] usb usb7: Product: UHCI Host Controller [ 7.030738] usb usb7: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 7.037679] usb usb7: SerialNumber: 0000:00:1d.1 [ 7.042415] usb usb7: configuration #1 chosen from 1 choice [ 7.048095] hub 7-0:1.0: USB hub found [ 7.051826] hub 7-0:1.0: 2 ports detected [ 7.055925] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 7.063050] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 7.068380] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 7.075761] uhci_hcd 0000:00:1d.2: detected 2 ports [ 7.080693] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 7.086484] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.093256] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.100488] usb usb8: Product: UHCI Host Controller [ 7.105355] usb usb8: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 7.112299] usb usb8: SerialNumber: 0000:00:1d.2 [ 7.117040] usb usb8: configuration #1 chosen from 1 choice [ 7.122721] hub 8-0:1.0: USB hub found [ 7.126474] hub 8-0:1.0: 2 ports detected [ 7.130726] usbcore: registered new interface driver usblp [ 7.136202] Initializing USB Mass Storage driver... [ 7.141201] usbcore: registered new interface driver usb-storage [ 7.147194] USB Mass Storage support registered. [ 7.151925] usbcore: registered new interface driver libusual [ 7.157999] PNP: No PS/2 controller found. Probing ports directly. [ 7.166817] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.171777] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 7.176936] mice: PS/2 mouse device common for all mice [ 7.182390] rtc_cmos 00:05: RTC can wake from S4 [ 7.187114] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 7.193215] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs [ 7.199474] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 7.206958] cpuidle: using governor ladder [ 7.211046] cpuidle: using governor menu [ 7.217313] usbcore: registered new interface driver hiddev [ 7.222958] usbcore: registered new interface driver usbhid [ 7.225527] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 7.235492] usbhid: v2.6:USB HID core driver [ 7.235578] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.245955] Netfilter messages via NETLINK v0.30. [ 7.248433] ata2.00: configured for UDMA/100 [ 7.254920] ata2: EH complete [ 7.254934] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 7.255194] ctnetlink v0.93: registering with nfnetlink. [ 7.255301] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.255335] TCP cubic registered [ 7.255337] Initializing XFRM netlink socket [ 7.255678] NET: Registered protocol family 10 [ 7.255952] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 7.255979] IPv6 over IPv4 tunneling driver [ 7.256166] NET: Registered protocol family 17 [ 7.256385] RPC: Registered udp transport module. [ 7.256388] RPC: Registered tcp transport module. [ 7.331059] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DH-16AAS JD12 PQ: 0 ANSI: 5 [ 7.344674] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 7.352140] Uniform CD-ROM driver Revision: 3.20 [ 7.357172] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 7.405359] EXT3-fs: INFO: recovery required on readonly filesystem. [ 7.411704] EXT3-fs: write access will be enabled during recovery. [ 7.421659] usb 5-1: New USB device found, idVendor=413c, idProduct=2101 [ 7.428380] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.435559] usb 5-1: Product: Dell Smart Card Reader Keyboard [ 7.441339] usb 5-1: Manufacturer: Dell [ 7.445291] usb 5-1: configuration #1 chosen from 1 choice [ 7.458028] input: Dell Dell Smart Card Reader Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input0 [ 7.469543] generic-usb 0003:413C:2101.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell Dell Smart Card Reader Keyboard] on usb-0000:00:1a.2-1/input0 [ 7.519076] kjournald starting. Commit interval 5 seconds [ 7.519097] EXT3-fs: recovery complete. [ 7.520404] EXT3-fs: mounted filesystem with writeback data mode. [ 7.520418] VFS: Mounted root (ext3 filesystem) readonly on device 8:3. [ 7.541124] Freeing unused kernel memory: 5556k freed [ 7.596023] usb 5-2: new low speed USB device using uhci_hcd and address 3 [ 7.773623] usb 5-2: New USB device found, idVendor=0461, idProduct=4d51 [ 7.780318] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 7.787451] usb 5-2: Product: DELL Laser Mouse [ 7.792288] usb 5-2: configuration #1 chosen from 1 choice [ 59.161513] BUG: Unhandled exception over domain Xenomai at 0xffffffff810800fc - switching to ROOT [ 59.161513] Pid: 350, comm: gatekeeper/0 Tainted: G W 2.6.31.1-xenomai-i2.4-06 #7 [ 59.161513] Call Trace: [ 59.161513] <NMI> [<ffffffff81021f70>] __ipipe_handle_exception+0x3da/0x409 [ 59.161513] [<ffffffff8100c51c>] invalid_op+0x1c/0x60 [ 59.161513] [<ffffffff810800fc>] ? __ipipe_restore_root+0x87/0xb8 [ 59.161513] [<ffffffff81056f39>] cpu_clock+0x5a/0x62 [ 59.161513] [<ffffffff8103d52a>] vprintk+0x233/0x354 [ 59.161513] [<ffffffff8103d61f>] ? vprintk+0x328/0x354 [ 59.161513] [<ffffffff8143d5ac>] printk+0x1e7/0x28a [ 59.161513] [<ffffffff81440871>] die_nmi+0x56/0x18e [ 59.161513] [<ffffffff81440de6>] default_nmi_watchdog_tick+0x12b/0x1aa [ 59.161513] [<ffffffff8135bfe0>] rthal_nmi_watchdog_tick+0x88/0x114 [ 59.161513] [<ffffffff810561f0>] ? notify_die+0x2e/0x30 [ 59.161513] [<ffffffff8144040a>] do_nmi+0xd4/0x2ac [ 59.161513] [<ffffffff8143ff2a>] nmi+0x1a/0x20 [ 59.161513] [<ffffffff8135c2f4>] ? rthal_nmi_arm+0xe1/0x176 [ 59.161513] <<EOE>> [<ffffffff810a45bc>] xntimer_next_local_shot+0x11b/0x120 [ 59.161513] [<ffffffff810a4707>] xntimer_tick_aperiodic+0x146/0x152 [ 59.161513] [<ffffffff8109db01>] xnintr_clock_handler+0x69/0x179 [ 59.161513] [<ffffffff8107ecd9>] __virq_end+0x68/0x1b2 [ 59.161513] [<ffffffff8100afd6>] ? ftrace_call+0x5/0x2b [ 59.161513] [<ffffffff8107f488>] ipipe_suspend_domain+0x19a/0x282 [ 59.161513] [<ffffffff8100afd6>] ? ftrace_call+0x5/0x2b [ 59.161513] [<ffffffff8107f6e8>] __ipipe_walk_pipeline+0x178/0x23c [ 59.161513] [<ffffffff8107fcd8>] __ipipe_dispatch_wired_nocheck+0x1d8/0x1e7 [ 59.161513] [<ffffffff8107fdaa>] __ipipe_dispatch_wired+0xc3/0xcc [ 59.161513] [<ffffffff81021477>] __ipipe_handle_irq+0x128/0x3ca [ 59.161513] [<ffffffff8100afd6>] ? ftrace_call+0x5/0x2b [ 59.161513] [<ffffffff81021b6b>] ipipe_trigger_irq+0x71/0x9c [ 59.161513] [<ffffffff8108006f>] ? __ipipe_unstall_root+0xd1/0xd7 [ 59.161513] [<ffffffff81030959>] ? raw_local_irq_enable+0xe/0x10 [ 59.161513] [<ffffffff8100afd6>] ? ftrace_call+0x5/0x2b [ 59.161513] [<ffffffff8100afd6>] ? ftrace_call+0x5/0x2b [ 59.161513] [<ffffffff8109f037>] __xnpod_schedule+0xa0/0x6ae [ 59.161513] [<ffffffff810a7ebf>] xnpod_schedule+0x32/0x34 [ 59.161513] [<ffffffff810a803a>] gatekeeper_thread+0x179/0x18f [ 59.161513] [<ffffffff8103766d>] ? default_wake_function+0x0/0x14 [ 59.161513] [<ffffffff81061656>] ? raw_local_irq_restore+0x19/0x1b [ 59.161513] [<ffffffff8143f874>] ? _spin_unlock_irqrestore+0x16/0x18 [ 59.161513] [<ffffffff810a7ec1>] ? gatekeeper_thread+0x0/0x18f [ 59.161513] [<ffffffff810521ba>] kthread+0x8f/0x97 [ 59.161513] [<ffffffff8100c9ba>] child_rip+0xa/0x20 [ 59.161513] [<ffffffff8105212b>] ? kthread+0x0/0x97 [ 59.161513] [<ffffffff8100c9b0>] ? child_rip+0x0/0x20 [ 59.161513] ------------[ cut here ]------------ [ 59.561515] kernel BUG at kernel/ipipe/core.c:331! [ 59.561515] invalid opcode: 0000 [#1] SMP [ 59.561515] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:03:02.0/resource [ 59.561515] CPU 0 [ 59.561515] Modules linked in: 8139too [ 59.561515] Pid: 350, comm: gatekeeper/0 Tainted: G W 2.6.31.1-xenomai-i2.4-06 #7 OptiPlex 960 [ 59.561515] RIP: 0010:[<ffffffff810800fc>] [<ffffffff810800fc>] __ipipe_restore_root+0x87/0xb8 [ 59.561515] RSP: 0018:ffff88002be07cd8 EFLAGS: 00010006 [ 59.561515] RAX: ffff88002be00000 RBX: 0000000000000092 RCX: 0000000000000003 [ 59.561515] RDX: ffff88002be00000 RSI: ffffffff81be7790 RDI: 0000000000000001 [ 59.561515] RBP: ffff88002be07cf8 R08: ffff88002be07d18 R09: 0000000000000073 [ 59.561515] R10: ffffffff8165b610 R11: 0000000000000000 R12: ffffffff81c9ddc0 [ 59.561515] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 [ 59.561515] FS: 0000000000000000(0000) GS:ffff88002be00000(0000) knlGS:0000000000000000 [ 59.561515] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 59.561515] CR2: 000000000060a190 CR3: 0000000123d35000 CR4: 00000000000406f0 [ 59.561515] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 59.561515] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 59.561515] Process gatekeeper/0 (pid: 350, threadinfo ffff88012729c000, task ffff88012799e500) [ 59.561515] Stack: [ 59.561515] 0000000000000000 0000000dc64d0d06 0000000000000000 ffff88002be07d48 [ 59.561515] <0> ffff88002be07d18 ffffffff81056f39 ffffffff81c677b3 0000000000000027 [ 59.561515] <0> ffff88002be07db8 ffffffff8103d52a 00000000ffffffff ffff88002be07d78 [ 59.561515] Call Trace: [ 59.561515] <NMI> [ 59.561515] [<ffffffff81056f39>] cpu_clock+0x5a/0x62 [ 59.561515] [<ffffffff8103d52a>] vprintk+0x233/0x354 [ 59.561515] [<ffffffff8103d61f>] ? vprintk+0x328/0x354 [ 59.561515] [<ffffffff8143d5ac>] printk+0x1e7/0x28a [ 59.561515] [<ffffffff81440871>] die_nmi+0x56/0x18e [ 59.561515] [<ffffffff81440de6>] default_nmi_watchdog_tick+0x12b/0x1aa [ 59.561515] [<ffffffff8135bfe0>] rthal_nmi_watchdog_tick+0x88/0x114 [ 59.561515] [<ffffffff810561f0>] ? notify_die+0x2e/0x30 [ 59.561515] [<ffffffff8144040a>] do_nmi+0xd4/0x2ac [ 59.561515] [<ffffffff8143ff2a>] nmi+0x1a/0x20 [ 59.561515] [<ffffffff8135c2f4>] ? rthal_nmi_arm+0xe1/0x176 [ 59.561515] <<EOE>> [ 59.561515] [<ffffffff810a45bc>] xntimer_next_local_shot+0x11b/0x120 [ 59.561515] [<ffffffff810a4707>] xntimer_tick_aperiodic+0x146/0x152 [ 59.561515] [<ffffffff8109db01>] xnintr_clock_handler+0x69/0x179 [ 59.561515] [<ffffffff8107ecd9>] __virq_end+0x68/0x1b2 [ 59.561515] [<ffffffff8100afd6>] ? ftrace_call+0x5/0x2b [ 59.561515] [<ffffffff8107f488>] ipipe_suspend_domain+0x19a/0x282 [ 59.561515] [<ffffffff8100afd6>] ? ftrace_call+0x5/0x2b [ 59.561515] [<ffffffff8107f6e8>] __ipipe_walk_pipeline+0x178/0x23c [ 59.561515] [<ffffffff8107fcd8>] __ipipe_dispatch_wired_nocheck+0x1d8/0x1e7 [ 59.561515] [<ffffffff8107fdaa>] __ipipe_dispatch_wired+0xc3/0xcc [ 59.561515] [<ffffffff81021477>] __ipipe_handle_irq+0x128/0x3ca [ 59.561515] [<ffffffff8100afd6>] ? ftrace_call+0x5/0x2b [ 59.561515] [<ffffffff81021b6b>] ipipe_trigger_irq+0x71/0x9c [ 59.561515] [<ffffffff8108006f>] ? __ipipe_unstall_root+0xd1/0xd7 [ 59.561515] [<ffffffff81030959>] ? raw_local_irq_enable+0xe/0x10 [ 59.561515] [<ffffffff8100afd6>] ? ftrace_call+0x5/0x2b [ 59.561515] [<ffffffff8100afd6>] ? ftrace_call+0x5/0x2b [ 59.561515] [<ffffffff8109f037>] __xnpod_schedule+0xa0/0x6ae [ 59.561515] [<ffffffff810a7ebf>] xnpod_schedule+0x32/0x34 [ 59.561515] [<ffffffff810a803a>] gatekeeper_thread+0x179/0x18f [ 59.561515] [<ffffffff8103766d>] ? default_wake_function+0x0/0x14 [ 59.561515] [<ffffffff81061656>] ? raw_local_irq_restore+0x19/0x1b [ 59.561515] [<ffffffff8143f874>] ? _spin_unlock_irqrestore+0x16/0x18 [ 59.561515] [<ffffffff810a7ec1>] ? gatekeeper_thread+0x0/0x18f [ 59.561515] [<ffffffff810521ba>] kthread+0x8f/0x97 [ 59.561515] [<ffffffff8100c9ba>] child_rip+0xa/0x20 [ 59.561515] [<ffffffff8105212b>] ? kthread+0x0/0x97 [ 59.561515] [<ffffffff8100c9b0>] ? child_rip+0x0/0x20 [ 59.561515] Code: 01 00 00 00 65 48 8b 04 25 a0 cb 00 00 4d 85 f6 4e 8b 24 20 74 0a bf 01 00 00 80 e8 21 25 00 00 53 9d 49 81 fc c0 1f c7 81 74 04 <0f> 0b eb fe 4d 85 ed 74 1a 9c fa 65 48 8b 04 25 a0 cb 00 00 48 [ 59.961515] RIP [<ffffffff810800fc>] __ipipe_restore_root+0x87/0xb8 [ 59.961515] RSP <ffff88002be07cd8> [ 59.961515] ---[ end trace a7919e7f17c0a728 ]--- [ 59.961515] Kernel panic - not syncing: Fatal exception in interrupt [ 59.961515] Pid: 350, comm: gatekeeper/0 Tainted: G D W 2.6.31.1-xenomai-i2.4-06 #7 [ 59.961515] Call Trace: [ 59.961515] <NMI> [<ffffffff8143d321>] panic+0x7a/0x11e [ 59.961515] [<ffffffff8144074e>] oops_end+0x92/0x9f [ 59.961515] [<ffffffff8100f219>] die+0x5a/0x63 [ 59.961515] [<ffffffff81440196>] do_trap+0x115/0x124 [ 59.961515] [<ffffffff8100afd6>] ? ftrace_call+0x5/0x2b [ 59.961515] [<ffffffff8100d340>] do_invalid_op+0x94/0x9d [ 59.961515] [<ffffffff810800fc>] ? __ipipe_restore_root+0x87/0xb8 [ 59.961515] [<ffffffff81081191>] ? ipipe_trace_panic_dump+0x16/0x290 [ 59.961515] [<ffffffff8100f2b2>] ? show_trace+0x15/0x17 [ 59.961515] [<ffffffff8143d29e>] ? dump_stack+0x77/0x80 [ 59.961515] [<ffffffff81021f86>] __ipipe_handle_exception+0x3f0/0x409 [ 59.961515] [<ffffffff8100c51c>] invalid_op+0x1c/0x60 [ 59.961515] [<ffffffff810800fc>] ? __ipipe_restore_root+0x87/0xb8 [ 59.961515] [<ffffffff81056f39>] cpu_clock+0x5a/0x62 [ 59.961515] [<ffffffff8103d52a>] vprintk+0x233/0x354 [ 59.961515] [<ffffffff8103d61f>] ? vprintk+0x328/0x354 [ 59.961515] [<ffffffff8143d5ac>] printk+0x1e7/0x28a [ 59.961515] [<ffffffff81440871>] die_nmi+0x56/0x18e [ 59.961515] [<ffffffff81440de6>] default_nmi_watchdog_tick+0x12b/0x1aa [ 59.961515] [<ffffffff8135bfe0>] rthal_nmi_watchdog_tick+0x88/0x114 [ 59.961515] [<ffffffff810561f0>] ? notify_die+0x2e/0x30 [ 59.961515] [<ffffffff8144040a>] do_nmi+0xd4/0x2ac [ 59.961515] [<ffffffff8143ff2a>] nmi+0x1a/0x20 [ 59.961515] [<ffffffff8135c2f4>] ? rthal_nmi_arm+0xe1/0x176 [ 59.961515] <<EOE>> [<ffffffff810a45bc>] xntimer_next_local_shot+0x11b/0x120 [ 59.961515] [<ffffffff810a4707>] xntimer_tick_aperiodic+0x146/0x152 [ 59.961515] [<ffffffff8109db01>] xnintr_clock_handler+0x69/0x179 [ 59.961515] [<ffffffff8107ecd9>] __virq_end+0x68/0x1b2 [ 59.961515] [<ffffffff8100afd6>] ? ftrace_call+0x5/0x2b [ 59.961515] [<ffffffff8107f488>] ipipe_suspend_domain+0x19a/0x282 [ 59.961515] [<ffffffff8100afd6>] ? ftrace_call+0x5/0x2b [ 59.961515] [<ffffffff8107f6e8>] __ipipe_walk_pipeline+0x178/0x23c [ 59.961515] [<ffffffff8107fcd8>] __ipipe_dispatch_wired_nocheck+0x1d8/0x1e7 [ 59.961515] [<ffffffff8107fdaa>] __ipipe_dispatch_wired+0xc3/0xcc [ 59.961515] [<ffffffff81021477>] __ipipe_handle_irq+0x128/0x3ca [ 59.961515] [<ffffffff8100afd6>] ? ftrace_call+0x5/0x2b [ 59.961515] [<ffffffff81021b6b>] ipipe_trigger_irq+0x71/0x9c [ 59.961515] [<ffffffff8108006f>] ? __ipipe_unstall_root+0xd1/0xd7 [ 59.961515] [<ffffffff81030959>] ? raw_local_irq_enable+0xe/0x10 [ 59.961515] [<ffffffff8100afd6>] ? ftrace_call+0x5/0x2b [ 59.961515] [<ffffffff8100afd6>] ? ftrace_call+0x5/0x2b [ 59.961515] [<ffffffff8109f037>] __xnpod_schedule+0xa0/0x6ae [ 59.961515] [<ffffffff810a7ebf>] xnpod_schedule+0x32/0x34 [ 59.961515] [<ffffffff810a803a>] gatekeeper_thread+0x179/0x18f [ 59.961515] [<ffffffff8103766d>] ? default_wake_function+0x0/0x14 [ 59.961515] [<ffffffff81061656>] ? raw_local_irq_restore+0x19/0x1b [ 59.961515] [<ffffffff8143f874>] ? _spin_unlock_irqrestore+0x16/0x18 [ 59.961515] [<ffffffff810a7ec1>] ? gatekeeper_thread+0x0/0x18f [ 59.961515] [<ffffffff810521ba>] kthread+0x8f/0x97 [ 59.961515] [<ffffffff8100c9ba>] child_rip+0xa/0x20 [ 59.961515] [<ffffffff8105212b>] ? kthread+0x0/0x97 [ 59.961515] [<ffffffff8100c9b0>] ? child_rip+0x0/0x20 ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [Xenomai-help] Freeze on SMP x86-64 2009-10-06 13:56 ` Jan Kiszka 2009-10-06 14:50 ` Roman Pisl 2009-10-06 15:33 ` Roman Pisl @ 2009-10-06 15:45 ` Roman Pisl 2009-10-06 15:59 ` Jan Kiszka 2 siblings, 1 reply; 19+ messages in thread From: Roman Pisl @ 2009-10-06 15:45 UTC (permalink / raw) To: Jan Kiszka; +Cc: xenomai [-- Attachment #1: Type: text/plain, Size: 859 bytes --] On 6.10.2009 15:56, Jan Kiszka wrote: > Roman Pisl wrote: >> ... >>> >>> Is there a chance to grab the panic log via serial line? The first of >>> your two screenshots indicate that there might have happened something >>> interesting before the NMI triggered, but it's scrolled out of sight. >>> >>> Jan >>> >> >> Hello, >> here I send kernel panic (triggered by rt_task_sleep and latency test) >> grabbed via serial line. > > Hmm, still only NMI alarms... > >> >> I'm ready to help with resolving this issue. > > Could you try enabling the I-pipe tracer with function tracing? It > should dump a trace of the functions that were executed before the > watchdog triggered. You may need to extend the number of tracepoints a > bit, try "echo 1000> /proc/ipipe/trace/back_trace_points". > > Jan > Then I had I/O activity on the background and got this. Roman [-- Attachment #2: panic.rt_task_sleep.ipipe2 --] [-- Type: text/plain, Size: 131468 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31.1-xenomai-i2.4-06 (root@crane-k) (gcc version 4.4.1 (Gentoo 4.4.1 p1.0) ) #7 SMP Tue Oct 6 17:10:50 CEST 2009 [ 0.000000] Command line: root=/dev/sda3 nmi_watchdog=2 console=ttyS0,115200 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cd9ffc00 (usable) [ 0.000000] BIOS-e820: 00000000cd9ffc00 - 00000000cda53c00 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cda53c00 - 00000000cda55c00 (ACPI data) [ 0.000000] BIOS-e820: 00000000cda55c00 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000128000000 (usable) [ 0.000000] DMI 2.5 present. [ 0.000000] last_pfn = 0x128000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xcd9ff max_arch_pfn = 0x400000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cd9ff000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000128000000 [ 0.000000] ACPI: RSDP 00000000000fec00 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000000fc7cb 00074 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: FACP 00000000000fc8fb 000F4 (v03 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: DSDT 00000000ffe9cff8 054AD (v01 DELL dt_ex 00001000 INTL 20050624) [ 0.000000] ACPI: FACS 00000000cd9ffc00 00040 [ 0.000000] ACPI: SSDT 00000000ffea25c4 000AA (v01 DELL st_ex 00001000 INTL 20050624) [ 0.000000] ACPI: APIC 00000000000fc9ef 00092 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: BOOT 00000000000fca81 00028 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: ASF! 00000000000fcaa9 00096 (v32 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: MCFG 00000000000fcb3f 0003E (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: HPET 00000000000fcb7d 00038 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: TCPA 00000000000fcdd9 00032 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: DMAR 00000000000fce0b 00120 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] ACPI: SLIC 00000000000fcbb5 00176 (v01 DELL B10K 00000015 ASL 00000061) [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0128000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001cfc2d4] TEXT DATA BSS ==> [0001000000 - 0001cfc2d4] [ 0.000000] #3 [000009a000 - 0000100000] BIOS reserved ==> [000009a000 - 0000100000] [ 0.000000] #4 [0001cfd000 - 0001cfd1f0] BRK ==> [0001cfd000 - 0001cfd1f0] [ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #6 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00128000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009a [ 0.000000] 0: 0x00000100 -> 0x000cd9ff [ 0.000000] 0: 0x00100000 -> 0x00128000 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] 8 Processors exceeds NR_CPUS limit of 4 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) [ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 1312 pages at ffff88002be00000, static data 5341408 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 989291 [ 0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=2 console=ttyS0,115200 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 3859008k/4849664k available (4374k kernel code, 825756k absent, 163992k reserved, 2164k data, 5556k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:384 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2659.948 MHz processor. [ 0.000059] I-pipe 2.4-06: pipeline enabled. [ 0.003121] Console: colour VGA+ 80x25 [ 0.003141] console [ttyS0] enabled [ 0.004000] HPET: 8 timers in total, 4 timers will be used for per-cpu timer [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.89 BogoMIPS (lpj=10639792) [ 0.012036] Mount-cache hash table entries: 256 [ 0.016177] Initializing cgroup subsys ns [ 0.020006] Initializing cgroup subsys cpuacct [ 0.024009] Initializing cgroup subsys freezer [ 0.028014] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.036004] CPU: L2 cache: 3072K [ 0.039209] CPU: Physical Processor ID: 0 [ 0.040004] CPU: Processor Core ID: 0 [ 0.044005] mce: CPU supports 6 MCE banks [ 0.048008] CPU0: Thermal monitoring enabled (TM2) [ 0.052005] Performance Counters: Core2 events, Intel PMU driver. [ 0.061654] ... version: 2 [ 0.064004] ... bit width: 40 [ 0.068004] ... generic counters: 2 [ 0.072004] ... value mask: 000000ffffffffff [ 0.076004] ... max period: 000000007fffffff [ 0.080004] ... fixed-purpose counters: 3 [ 0.084004] ... counter mask: 0000000700000003 [ 0.088015] Freeing SMP alternatives: 36k freed [ 0.092024] ACPI: Core revision 20090521 [ 0.339852] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.340007] ftrace: allocating 21378 entries in 84 pages [ 0.359202] Setting APIC routing to flat [ 0.360325] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.364001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.364001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.364001] ..... (found apic 0 pin 2) ... [ 0.404854] ....... works. [ 0.407543] CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.416001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5319.98 BogoMIPS (lpj=10639963) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.505434] CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.513228] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.516089] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 5320.00 BogoMIPS (lpj=10640006) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU2: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.613592] CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.621228] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.624072] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 5319.99 BogoMIPS (lpj=10639996) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU3: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.721431] CPU3: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.729227] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.732019] Brought up 4 CPUs [ 0.736006] Total of 4 processors activated (21279.87 BogoMIPS). [ 0.740041] Testing NMI watchdog ... OK. [ 0.828522] NET: Registered protocol family 16 [ 0.836323] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.840031] ACPI: bus type pci registered [ 0.844026] PCI: Using configuration type 1 for base access [ 0.888219] bio: create slab <bio-0> at 0 [ 1.040957] ACPI: BIOS _OSI(Linux) query ignored [ 1.090667] ACPI: Interpreter enabled [ 1.092020] ACPI: (supports S0 S5) [ 1.096663] ACPI: Using IOAPIC for interrupt routing [ 1.304561] ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 7F 20090521 tbutils-246 [ 1.321153] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 1.339918] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.341248] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.344032] pci 0000:00:03.0: PME# disabled [ 1.349468] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 1.352028] pci 0000:00:19.0: PME# disabled [ 1.357310] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.360032] pci 0000:00:1a.7: PME# disabled [ 1.364366] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.368028] pci 0000:00:1b.0: PME# disabled [ 1.372258] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.376032] pci 0000:00:1c.0: PME# disabled [ 1.380270] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.384031] pci 0000:00:1c.1: PME# disabled [ 1.393252] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.396029] pci 0000:00:1d.7: PME# disabled [ 1.404598] pci 0000:00:1f.2: PME# supported from D3hot [ 1.408028] pci 0000:00:1f.2: PME# disabled [ 1.413296] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot [ 1.416033] pci 0000:03:00.0: PME# disabled [ 1.420370] pci 0000:03:02.0: PME# supported from D1 D2 D3hot D3cold [ 1.424032] pci 0000:03:02.0: PME# disabled [ 1.428268] pci 0000:00:1e.0: transparent bridge [ 3.817264] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 3.828295] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 3.837172] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 3.845926] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 3.854752] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 3.864912] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 3.873626] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 3.882497] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 3.892196] SCSI subsystem initialized [ 3.896181] usbcore: registered new interface driver usbfs [ 3.900147] usbcore: registered new interface driver hub [ 3.904110] usbcore: registered new device driver usb [ 3.912133] PCI: Using ACPI for IRQ routing [ 3.968087] pnp: PnP ACPI init [ 3.971184] ACPI: bus type pnp registered [ 4.068296] pnp: PnP ACPI: found 9 devices [ 4.072423] ACPI: ACPI bus type pnp unregistered [ 4.077109] system 00:01: ioport range 0x800-0x85f has been reserved [ 4.083488] system 00:01: ioport range 0xc00-0xc7f has been reserved [ 4.089875] system 00:01: ioport range 0x860-0x8ff has been reserved [ 4.104513] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 4.110456] pci 0000:00:1c.0: IO window: disabled [ 4.115369] pci 0000:00:1c.0: MEM window: 0xfe500000-0xfe5fffff [ 4.121491] pci 0000:00:1c.0: PREFETCH window: disabled [ 4.126925] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 4.132867] pci 0000:00:1c.1: IO window: disabled [ 4.137778] pci 0000:00:1c.1: MEM window: 0xfe400000-0xfe4fffff [ 4.143900] pci 0000:00:1c.1: PREFETCH window: disabled [ 4.149329] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 4.155272] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 4.160617] pci 0000:00:1e.0: MEM window: 0xfe300000-0xfe3fffff [ 4.166739] pci 0000:00:1e.0: PREFETCH window: disabled [ 4.172203] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.178983] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.185976] NET: Registered protocol family 2 [ 4.190476] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 4.198336] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 4.207359] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 4.214506] TCP: Hash tables configured (established 262144 bind 65536) [ 4.221143] TCP reno registered [ 4.224621] NET: Registered protocol family 1 [ 4.229852] Simple Boot Flag at 0x7a set to 0x1 [ 4.243213] audit: initializing netlink socket (disabled) [ 4.248680] type=2000 audit(1254850510.245:1): initialized [ 4.259565] I-pipe: Domain Xenomai registered. [ 4.264364] Xenomai: hal/x86_64 started. [ 4.268390] Xenomai: scheduling class idle registered. [ 4.273577] Xenomai: scheduling class rt registered. [ 4.294823] Xenomai: real-time nucleus v2.5-rc3 (Flying In A Blue Dream) loaded. [ 4.303000] Xenomai: NMI watchdog started (threshold=100 us). [ 4.308897] Xenomai: starting native API services. [ 4.313731] Xenomai: starting POSIX services. [ 4.319880] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 4.360626] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 4.374108] fuse init (API version 7.12) [ 4.379961] msgmni has been set to 7538 [ 4.387344] alg: No test for stdrng (krng) [ 4.392371] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 4.399815] io scheduler noop registered [ 4.403781] io scheduler anticipatory registered [ 4.408443] io scheduler deadline registered [ 4.412799] io scheduler cfq registered (default) [ 4.422666] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 4.459879] Non-volatile memory driver v1.3 [ 4.464154] Linux agpgart interface v0.103 [ 4.468304] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled ÿ[ 4.729708] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 4.738831] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 4.745286] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.752791] 0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17) is a 16550A [ 4.777566] brd: module loaded [ 4.790003] loop: module loaded [ 4.795363] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.802659] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x2f impl RAID mode [ 4.810876] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems [ 4.848435] scsi0 : ahci [ 4.852265] scsi1 : ahci [ 4.855898] scsi2 : ahci [ 4.859527] scsi3 : ahci [ 4.863188] scsi4 : ahci [ 4.866812] scsi5 : ahci [ 4.876697] ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 30 [ 4.884134] ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 30 [ 4.891571] ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 30 [ 4.899007] ata4: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970280 irq 30 [ 4.906443] ata5: DUMMY [ 4.908936] ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 30 [ 4.918594] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 4.925081] Copyright (c) 1999-2006 Intel Corporation. [ 4.930675] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 4.936637] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 4.942652] e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 4.949685] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb [ 5.065507] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:e8:39:3c:95 [ 5.072943] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 5.079410] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: 2021ff-0ff [ 5.086053] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 [ 5.092795] Copyright (c) 2007-2009 Intel Corporation. [ 5.098354] Intel(R) Virtual Function Network Driver - version 1.0.0-k0 [ 5.105012] Copyright (c) 2009 Intel Corporation. [ 5.110219] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 5.116705] 8139cp 0000:03:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 5.126654] tun: Universal TUN/TAP device driver, 1.6 [ 5.131750] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 5.139130] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.145888] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 5.153132] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 5.159035] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 5.170564] ehci_hcd 0000:00:1a.7: debug port 1 [ 5.175307] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe6da000 [ 5.192110] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 5.198263] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.205091] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.212353] usb usb1: Product: EHCI Host Controller [ 5.217273] usb usb1: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 ehci_hcd [ 5.224275] usb usb1: SerialNumber: 0000:00:1a.7 [ 5.229619] usb usb1: configuration #1 chosen from 1 choice [ 5.235801] hub 1-0:1.0: USB hub found [ 5.237628] ata3: SATA link down (SStatus 4 SControl 300) [ 5.237720] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.237798] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.237869] ata4: SATA link down (SStatus 4 SControl 300) [ 5.237955] ata6: SATA link down (SStatus 0 SControl 300) [ 5.240027] ata2.00: ATAPI: PLDS DVD+/-RW DH-16AAS, JD12, max UDMA/100, ATAPI AN [ 5.264790] ata1.00: ATA-8: ST3500418AS, CC44, max UDMA/133 [ 5.264808] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.277428] ata2.00: configured for UDMA/100 [ 5.291983] hub 1-0:1.0: 6 ports detected [ 5.296798] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.304083] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 5.305588] ata1.00: configured for UDMA/133 [ 5.306345] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC44 PQ: 0 ANSI: 5 [ 5.308679] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.309582] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 5.310186] sd 0:0:0:0: [sda] Write Protect is off [ 5.310510] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.348829] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 5.356303] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DH-16AAS JD12 PQ: 0 ANSI: 5 [ 5.360396] ehci_hcd 0000:00:1d.7: debug port 1 [ 5.360546] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000 [ 5.365401] sda: [ 5.372096] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 5.372453] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.372473] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.372493] usb usb2: Product: EHCI Host Controller [ 5.372510] usb usb2: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 ehci_hcd [ 5.372529] usb usb2: SerialNumber: 0000:00:1d.7 [ 5.373211] usb usb2: configuration #1 chosen from 1 choice [ 5.373785] hub 2-0:1.0: USB hub found [ 5.373844] hub 2-0:1.0: 6 ports detected [ 5.374890] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.375315] uhci_hcd: USB Universal Host Controller Interface driver [ 5.376104] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.376172] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 5.376843] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 5.376887] uhci_hcd 0000:00:1a.0: detected 2 ports [ 5.377066] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20 [ 5.377446] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.377466] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.377486] usb usb3: Product: UHCI Host Controller [ 5.377503] usb usb3: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 5.377522] usb usb3: SerialNumber: 0000:00:1a.0 [ 5.378182] usb usb3: configuration #1 chosen from 1 choice [ 5.378769] hub 3-0:1.0: USB hub found [ 5.378828] hub 3-0:1.0: 2 ports detected [ 5.379407] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.379469] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 5.380070] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 5.380102] uhci_hcd 0000:00:1a.1: detected 2 ports [ 5.380285] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00 [ 5.380672] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.380691] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.380712] usb usb4: Product: UHCI Host Controller [ 5.380728] usb usb4: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 5.380748] usb usb4: SerialNumber: 0000:00:1a.1 [ 5.381428] usb usb4: configuration #1 chosen from 1 choice [ 5.381997] hub 4-0:1.0: USB hub found [ 5.382056] hub 4-0:1.0: 2 ports detected [ 5.382648] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 5.382710] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 5.383271] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 5.383303] uhci_hcd 0000:00:1a.2: detected 2 ports [ 5.383422] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00 [ 5.383797] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.383817] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.383837] usb usb5: Product: UHCI Host Controller [ 5.383853] usb usb5: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 5.383873] usb usb5: SerialNumber: 0000:00:1a.2 [ 5.384602] usb usb5: configuration #1 chosen from 1 choice [ 5.385186] hub 5-0:1.0: USB hub found [ 5.385244] hub 5-0:1.0: 2 ports detected [ 5.385843] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.385907] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.386478] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 5.386509] uhci_hcd 0000:00:1d.0: detected 2 ports [ 5.386627] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80 [ 5.387014] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.387034] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.387054] usb usb6: Product: UHCI Host Controller [ 5.387070] usb usb6: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 5.387090] usb usb6: SerialNumber: 0000:00:1d.0 [ 5.387791] usb usb6: configuration #1 chosen from 1 choice [ 5.388412] hub 6-0:1.0: USB hub found [ 5.388471] hub 6-0:1.0: 2 ports detected [ 5.389069] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.389132] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.389694] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 5.389725] uhci_hcd 0000:00:1d.1: detected 2 ports [ 5.389843] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60 [ 5.390250] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.390270] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.390290] usb usb7: Product: UHCI Host Controller [ 5.390306] usb usb7: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 5.390326] usb usb7: SerialNumber: 0000:00:1d.1 [ 5.391022] usb usb7: configuration #1 chosen from 1 choice [ 5.391590] hub 7-0:1.0: USB hub found [ 5.391649] hub 7-0:1.0: 2 ports detected [ 5.392279] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.392344] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.392919] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 5.392951] uhci_hcd 0000:00:1d.2: detected 2 ports [ 5.393140] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 5.393526] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.393546] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.393566] usb usb8: Product: UHCI Host Controller [ 5.393582] usb usb8: Manufacturer: Linux 2.6.31.1-xenomai-i2.4-06 uhci_hcd [ 5.393602] usb usb8: SerialNumber: 0000:00:1d.2 [ 5.394263] usb usb8: configuration #1 chosen from 1 choice [ 5.394859] hub 8-0:1.0: USB hub found [ 5.394929] hub 8-0:1.0: 2 ports detected [ 5.396657] usbcore: registered new interface driver usblp [ 5.396681] Initializing USB Mass Storage driver... [ 5.397771] usbcore: registered new interface driver usb-storage [ 5.397796] USB Mass Storage support registered. [ 5.398887] usbcore: registered new interface driver libusual [ 5.400383] PNP: No PS/2 controller found. Probing ports directly. [ 5.403615] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.403653] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.404419] mice: PS/2 mouse device common for all mice [ 5.456701] rtc_cmos 00:05: RTC can wake from S4 [ 5.457301] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 5.457385] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs [ 5.457830] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.458715] cpuidle: using governor ladder [ 5.458732] cpuidle: using governor menu [ 5.469263] usbcore: registered new interface driver hiddev [ 5.469666] usbcore: registered new interface driver usbhid [ 5.469691] usbhid: v2.6:USB HID core driver [ 5.469787] Netfilter messages via NETLINK v0.30. [ 5.469867] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 5.471178] ctnetlink v0.93: registering with nfnetlink. [ 5.471576] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.471767] TCP cubic registered [ 5.471780] Initializing XFRM netlink socket [ 5.474093] NET: Registered protocol family 10 [ 5.475349] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 5.475489] IPv6 over IPv4 tunneling driver [ 5.476787] NET: Registered protocol family 17 [ 5.478035] RPC: Registered udp transport module. [ 5.478051] RPC: Registered tcp transport module. [ 5.904119] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 6.041016] sda1 sda2 sda3 sda4 <sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.056044] Uniform CD-ROM driver Revision: 3.20 [ 6.060486] sda5 [ 6.069209] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 6.079079] sda6 > [ 6.086051] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.143419] kjournald starting. Commit interval 5 seconds [ 6.143473] EXT3-fs: mounted filesystem with writeback data mode. [ 6.143533] VFS: Mounted root (ext3 filesystem) readonly on device 8:3. [ 6.145009] Freeing unused kernel memory: 5556k freed [ 6.238701] usb 5-1: New USB device found, idVendor=413c, idProduct=2101 [ 6.245531] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.252713] usb 5-1: Product: Dell Smart Card Reader Keyboard [ 6.258502] usb 5-1: Manufacturer: Dell [ 6.263114] usb 5-1: configuration #1 chosen from 1 choice [ 6.278839] input: Dell Dell Smart Card Reader Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input0 [ 6.290751] generic-usb 0003:413C:2101.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell Dell Smart Card Reader Keyboard] on usb-0000:00:1a.2-1/input0 \rINIT: version 2.86 booting [ 6.544154] usb 5-2: new low speed USB device using uhci_hcd and address 3 [ 6.720726] usb 5-2: New USB device found, idVendor=0461, idProduct=4d51 [ 6.727475] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 6.734736] usb 5-2: Product: DELL Laser Mouse [ 6.739916] usb 5-2: configuration #1 chosen from 1 choice [ 6.763631] input: DELL Laser Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input1 [ 6.774291] generic-usb 0003:0461:4D51.0002: input,hidraw1: USB HID v1.11 Mouse [DELL Laser Mouse] on usb-0000:00:1a.2-2/input0 [ 128.718661] ------------[ cut here ]------------ [ 128.722564] kernel BUG at kernel/ipipe/core.c:331! [ 128.724511] invalid opcode: 0000 [#1] SMP [ 128.728508] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:03:02.0/resource [ 128.737512] CPU 0 [ 128.740511] Modules linked in: 8139too [ 128.744509] Pid: 6309, comm: trivial Not tainted 2.6.31.1-xenomai-i2.4-06 #7 OptiPlex 960 [ 128.752508] RIP: 0010:[<ffffffff810800fc>] [<ffffffff810800fc>] __ipipe_restore_root+0x87/0xb8 [ 128.752508] RSP: 0018:ffff88002be07d48 EFLAGS: 00010006 [ 128.768508] RAX: ffff88002be00000 RBX: 0000000000000092 RCX: 00000000000072d8 [ 128.768508] RDX: ffff88002be00000 RSI: 0000001ba42ceda3 RDI: 0000000000000001 [ 128.768508] RBP: ffff88002be07d68 R08: ffffffffffdc2a91 R09: 0000000000000073 [ 128.768508] R10: ffff88002be07ec8 R11: 0000000000000003 R12: ffffffff81c9ddc0 [ 128.768508] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000200 [ 128.800508] FS: 00007f430b533950(0000) GS:ffff88002be00000(0000) knlGS:0000000000000000 [ 128.800508] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 128.800508] CR2: 00007f430b11c2e0 CR3: 0000000123907000 CR4: 00000000000406f0 [ 128.800508] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 128.800508] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 128.800508] Process trivial (pid: 6309, threadinfo ffff8801241f0000, task ffff880126ae0650) [ 128.800508] Stack: [ 128.800508] 0000000000000000 0000001ba42d607b 0000000000000000 ffff88002be07db8 [ 128.800508] <0> ffff88002be07d88 ffffffff81056f39 ffffffff81c677b3 000000000000007b [ 128.864509] <0> ffff88002be07e28 ffffffff8103d52a ffff88002be07e38 0000000000000006 [ 128.864509] Call Trace: [ 128.864509] <NMI> [ 128.864509] [<ffffffff81056f39>] cpu_clock+0x5a/0x62 [ 128.864509] [<ffffffff8103d52a>] vprintk+0x233/0x354 [ 128.864509] [<ffffffff81082643>] ? ipipe_trace_panic_freeze+0x9/0x73 [ 128.864509] [<ffffffff8143d5ac>] printk+0x1e7/0x28a [ 128.864509] [<ffffffff810824ae>] ? ipipe_trace_function+0x1c/0x1e [ 128.864509] [<ffffffff8107e10d>] ipipe_check_context+0x1dc/0x203 [ 128.864509] [<ffffffff8144037a>] do_nmi+0x44/0x2ac [ 128.864509] [<ffffffff8143ff2a>] nmi+0x1a/0x20 [ 128.864509] [<ffffffff8135c2f4>] ? rthal_nmi_arm+0xe1/0x176 [ 128.924507] <<EOE>> [ 128.924507] [<ffffffff810a45bc>] xntimer_next_local_shot+0x11b/0x120 [ 128.924507] [<ffffffff810a48d1>] xntimer_start_aperiodic+0x12a/0x13e [ 128.924507] [<ffffffff8109e784>] xntimer_start+0xe/0x10 [ 128.924507] [<ffffffff8109f8fd>] xnpod_suspend_thread+0xe4/0x1af [ 128.924507] [<ffffffff810acd98>] rt_task_sleep+0x63/0x7e [ 128.924507] [<ffffffff810afe07>] __rt_task_sleep+0x33/0x35 [ 128.924507] [<ffffffff810a9297>] losyscall_event+0xc9/0x1a8 [ 128.924507] [<ffffffff810a91ce>] ? losyscall_event+0x0/0x1a8 [ 128.924507] [<ffffffff810a91ce>] ? losyscall_event+0x0/0x1a8 [ 128.985008] [<ffffffff8107efd9>] __ipipe_dispatch_event+0x1b6/0x4cb [ 128.988512] [<ffffffff81021768>] __ipipe_syscall_root+0x4f/0x180 [ 128.996512] [<ffffffff8143f52d>] __ipipe_syscall_root_thunk+0x35/0x6a [ 128.996512] [<ffffffff8100b1c4>] ? system_call_after_swapgs+0x54/0x79 [ 128.996512] Code: 01 00 00 00 65 48 8b 04 25 a0 cb 00 00 4d 85 f6 4e 8b 24 20 74 0a bf 01 00 00 80 e8 21 25 00 00 53 9d 49 81 fc c0 1f c7 81 74 04 <0f> 0b eb fe 4d 85 ed 74 1a 9c fa 65 48 8b 04 25 a0 cb 00 00 48 [ 129.012510] RIP [<ffffffff810800fc>] __ipipe_restore_root+0x87/0xb8 [ 129.012510] RSP <ffff88002be07d48> [ 129.012510] I-pipe tracer log (1000 points): [ 129.012510] | # func 0 ipipe_trace_panic_freeze+0x9 (ipipe_check_context+0x165) [ 129.044509] | # func 0 cpumask_next+0x4 (ipipe_check_context+0x158) [ 129.044509] | # func 0 cpumask_next+0x4 (ipipe_check_context+0x158) [ 129.044509] | # func 0 cpumask_next+0x4 (ipipe_check_context+0x158) [ 129.044509] | # func 0 cpumask_next+0x4 (ipipe_check_context+0x158) [ 129.044509] | # func 0 cpumask_next+0x4 (ipipe_check_context+0x158) [ 129.044509] | # func -1 ipipe_check_context+0x11 (do_nmi+0x44) [ 129.044509] | # func -1 ipipe_test_foreign_stack+0xd (do_nmi+0x19) [ 129.108510] | # func -2 rthal_nmi_arm+0x11 (xntimer_next_local_shot+0x11b) [ 129.108510] | # func -3 __ipipe_set_irq_pending+0x11 (xntimer_next_local_shot+0xf9) [ 129.108510] | # event tick@312025 -3 xntimer_next_local_shot+0xab (xntimer_start_aperiodic+0x12a) [ 129.108510] | # func -3 xntimer_next_local_shot+0x7 (xntimer_start_aperiodic+0x12a) [ 129.108510] | # func -3 xntimer_enqueue_aperiodic+0x4 (xntimer_start_aperiodic+0xc6) [ 129.108510] | # func -4 xnarch_ns_to_tsc+0x4 (xntimer_start_aperiodic+0x6f) [ 129.108510] | # func -4 xntimer_start_aperiodic+0xb (xntimer_start+0xe) [ 129.108510] | # func -5 xntimer_start+0x4 (xnpod_suspend_thread+0xe4) [ 129.108510] | # func -5 T.537+0x7 (xntimer_migrate+0x82) [ 129.108510] | # func -5 T.538+0x9 (xntimer_migrate+0x21) [ 129.108510] | # func -5 xntimer_migrate+0x11 (xnpod_suspend_thread+0xd3) [ 129.108510] | + begin 0x80000000 -5 ipipe_test_and_stall_pipeline_head+0x20 (T.625+0xe) [ 129.108510] + func -6 ipipe_test_and_stall_pipeline_head+0x9 (T.625+0xe) [ 129.108510] + func -6 T.625+0x4 (xnpod_suspend_thread+0x2b) [ 129.108510] + func -6 xnpod_suspend_thread+0x11 (rt_task_sleep+0x63) [ 129.236508] + func -6 rt_task_sleep+0x9 (__rt_task_sleep+0x33) [ 129.236508] + func -6 __xn_safe_copy_from_user+0x9 (__rt_task_sleep+0x1f) [ 129.236508] + func -7 __rt_task_sleep+0x8 (losyscall_event+0xc9) [ 129.236508] | + end 0x80000000 -7 __ipipe_restore_pipeline_head+0xfa (ipipe_restore_pipeline_head+0x66) [ 129.236508] | # func -7 __ipipe_restore_pipeline_head+0x7 (ipipe_restore_pipeline_head+0x66) [ 129.236508] | # func -7 ipipe_restore_pipeline_head+0x7 (xnlock_put_irqrestore+0x23) [ 129.236508] | # func -7 xnlock_put_irqrestore+0x4 (xnshadow_harden+0x1a4) [ 129.236508] | # func -8 xnarch_save_fpu+0x4 (__xnpod_switch_fpu+0x44) [ 129.236508] | # func -8 __xnpod_switch_fpu+0x7 (xnpod_switch_fpu+0xe) [ 129.236508] | # func -8 xnpod_switch_fpu+0x4 (xnshadow_harden+0x187) [ 129.324507] | # func -8 __unlazy_fpu+0x4 (__switch_to+0x17e) [ 129.324507] | # func -8 __switch_to+0xb (thread_return+0x0) [ 129.324507] | # func -9 xnsched_pick_next+0x4 (__xnpod_schedule+0x129) [ 129.324507] | # func -9 T.623+0x4 (__xnpod_schedule+0xf0) [ 129.324507] | # [ 350] gatekee -1 -9 __xnpod_schedule+0xd2 (xnpod_schedule+0x32) [ 129.324507] | # func -9 ipipe_test_and_stall_pipeline_head+0x9 (T.625+0xe) [ 129.324507] | # func -9 T.625+0x4 (__xnpod_schedule+0xaa) [ 129.324507] | # func -10 __xnpod_schedule+0x11 (xnpod_schedule+0x32) [ 129.324507] | # func -10 xnpod_schedule+0x4 (xnpod_schedule_handler+0x59) [ 129.324507] | # func -10 xnpod_schedule_handler+0x7 (__ipipe_dispatch_wired_nocheck+0x127) [ 129.324507] | +func -10 __ipipe_dispatch_wired_nocheck+0x11 (__ipipe_dispatch_wired+0xc3) [ 129.324507] | +func -10 __ipipe_dispatch_wired+0xd (__ipipe_handle_irq+0x128) [ 129.324507] | +func -11 __ipipe_handle_irq+0x11 (ipipe_trigger_irq+0x71) [ 129.324507] | +begin 0x80000001 -11 ipipe_trigger_irq+0x52 (__xnpod_schedule+0xa0) [ 129.324507] +func -11 ipipe_trigger_irq+0x10 (__xnpod_schedule+0xa0) [ 129.324507] | +end 0x80000001 -11 __xnpod_schedule+0x8a (xnpod_schedule+0x32) [ 129.324507] | +begin 0x80000001 -11 __xnpod_schedule+0x3a (xnpod_schedule+0x32) [ 129.324507] +func -12 __xnpod_schedule+0x11 (xnpod_schedule+0x32) [ 129.324507] +func -12 xnpod_schedule+0x4 (gatekeeper_thread+0x179) [ 129.324507] | +end 0x80000000 -12 __ipipe_restore_pipeline_head+0xfa (ipipe_restore_pipeline_head+0x66) [ 129.492509] | *+func -12 __ipipe_restore_pipeline_head+0x7 (ipipe_restore_pipeline_head+0x66) [ 129.492509] | *+func -12 ipipe_restore_pipeline_head+0x7 (xnlock_put_irqrestore+0x23) [ 129.492509] | *+func -12 xnlock_put_irqrestore+0x4 (gatekeeper_thread+0x174) [ 129.492509] | *+func -13 ipipe_restore_pipeline_head+0x7 (T.622+0x24) [ 129.492509] | *+func -13 T.622+0x4 (xnpod_resume_thread+0x253) [ 129.492509] | *+[ 6309] trivial 99 -13 xnpod_resume_thread+0x44 (gatekeeper_thread+0x165) [ 129.492509] | *+func -13 ipipe_test_and_stall_pipeline_head+0x9 (T.625+0xe) [ 129.492509] | *+func -13 T.625+0x4 (xnpod_resume_thread+0x21) [ 129.492509] | *+func -14 xnpod_resume_thread+0x11 (gatekeeper_thread+0x165) [ 129.492509] | *+func -14 __xnlock_get+0x4 (__xnlock_get_irqsave+0x23) [ 129.492509] | +begin 0x80000000 -14 ipipe_test_and_stall_pipeline_head+0x20 (__xnlock_get_irqsave+0x17) [ 129.492509] +func -14 ipipe_test_and_stall_pipeline_head+0x9 (__xnlock_get_irqsave+0x17) [ 129.492509] +func -14 __xnlock_get_irqsave+0x9 (gatekeeper_thread+0x141) [ 129.492509] | +end 0x80000000 -14 __ipipe_restore_pipeline_head+0xfa (T.513+0x7b) [ 129.492509] | *+func -15 __ipipe_restore_pipeline_head+0x7 (T.513+0x7b) [ 129.492509] | *+func -15 T.513+0x7 (xnsched_renice_root+0x5c) [ 129.492509] | *+[ 350] gatekee -1 -15 xnsched_renice_root+0x54 (rpi_pop+0xe9) [ 129.492509] | *+func -15 xnsched_track_policy+0x4 (xnsched_renice_root+0x3b) [ 129.492509] | +begin 0x80000000 -15 T.515+0x20 (xnsched_renice_root+0x25) [ 129.492509] +func -16 T.515+0x9 (xnsched_renice_root+0x25) [ 129.492509] +func -16 xnsched_renice_root+0xd (rpi_pop+0xe9) [ 129.492509] | +end 0x80000000 -16 __ipipe_restore_pipeline_head+0xfa (ipipe_restore_pipeline_head+0x66) [ 129.492509] | *+func -16 __ipipe_restore_pipeline_head+0x7 (ipipe_restore_pipeline_head+0x66) [ 129.492509] | *+func -16 ipipe_restore_pipeline_head+0x7 (xnlock_put_irqrestore+0x23) [ 129.492509] | *+func -16 xnlock_put_irqrestore+0x4 (rpi_pop+0xc7) [ 129.492509] | *+func -17 xnsched_peek_rpi+0x4 (rpi_pop+0xa0) [ 129.492509] | *+func -17 __xnlock_get+0x4 (__xnlock_get_irqsave+0x23) [ 129.724508] | +begin 0x80000000 -17 ipipe_test_and_stall_pipeline_head+0x20 (__xnlock_get_irqsave+0x17) [ 129.724508] +func -17 ipipe_test_and_stall_pipeline_head+0x9 (__xnlock_get_irqsave+0x17) [ 129.724508] +func -17 __xnlock_get_irqsave+0x9 (rpi_pop+0x43) [ 129.724508] +func -18 rpi_pop+0x11 (gatekeeper_thread+0x135) [ 129.724508] +func -18 kthread_should_stop+0x4 (gatekeeper_thread+0x112) [ 129.724508] | +end 0x80000000 -18 __ipipe_unstall_root+0xd1 (raw_local_irq_enable+0xe) [ 129.724508] | #begin 0x80000000 -18 __ipipe_unstall_root+0x20 (raw_local_irq_enable+0xe) [ 129.724508] #func -18 __ipipe_unstall_root+0x9 (raw_local_irq_enable+0xe) [ 129.724508] #func -18 raw_local_irq_enable+0x4 (finish_task_switch+0x6a) [ 129.724508] #func -19 perf_counter_task_sched_in+0x7 (finish_task_switch+0x63) [ 129.724508] #func -19 needs_post_schedule_rt+0x4 (finish_task_switch+0x3d) [ 129.724508] #func -19 finish_task_switch+0x11 (thread_return+0x18b) [ 129.724508] | #end 0x80000000 -19 thread_return+0xe4 (gatekeeper_thread+0x10d) [ 129.724508] | #func -19 __unlazy_fpu+0x4 (__switch_to+0x17e) [ 129.724508] | #func -20 __switch_to+0xb (thread_return+0x0) [ 129.724508] | #begin 0x80000000 -20 schedule+0x5d3 (xnshadow_harden+0xd7) [ 129.724508] | #end 0x80000001 -20 __ipipe_dispatch_event+0x4b0 (schedule+0x5c1) [ 129.724508] | #begin 0x80000001 -20 __ipipe_dispatch_event+0x1da (schedule+0x5c1) [ 129.724508] | #end 0x80000000 -20 __ipipe_restore_pipeline_head+0xfa (ipipe_restore_pipeline_head+0x66) [ 129.724508] | *#func -21 __ipipe_restore_pipeline_head+0x7 (ipipe_restore_pipeline_head+0x66) [ 129.892508] | *#func -21 ipipe_restore_pipeline_head+0x7 (xnlock_put_irqrestore+0x23) [ 129.892508] | *#func -21 xnlock_put_irqrestore+0x4 (schedule_event+0x2d3) [ 129.892508] | *#func -21 xnsched_peek_rpi+0x4 (schedule_event+0x1d8) [ 129.892508] | *#func -21 __xnlock_get+0x4 (__xnlock_get_irqsave+0x23) [ 129.892508] | #begin 0x80000000 -22 ipipe_test_and_stall_pipeline_head+0x20 (__xnlock_get_irqsave+0x17) [ 129.892508] #func -22 ipipe_test_and_stall_pipeline_head+0x9 (__xnlock_get_irqsave+0x17) [ 129.892508] #func -22 __xnlock_get_irqsave+0x9 (schedule_event+0x1cc) [ 129.892508] #func -22 schedule_event+0x11 (__ipipe_dispatch_event+0x1b6) [ 129.892508] | #end 0x80000001 -22 __ipipe_dispatch_event+0x1a4 (schedule+0x5c1) [ 129.892508] | #begin 0x80000001 -22 __ipipe_dispatch_event+0x34 (schedule+0x5c1) [ 129.892508] #func -23 __ipipe_dispatch_event+0x11 (schedule+0x5c1) [ 129.892508] #func -23 __ipipe_event_monitored_p+0xb (schedule+0x5af) [ 129.892508] #func -23 perf_counter_task_sched_out+0x11 (schedule+0x57c) [ 129.892508] #func -23 dequeue_pushable_task+0x4 (pick_next_task_rt+0x7a) [ 129.892508] #func -23 pick_next_task_rt+0x9 (schedule+0x54f) [ 129.892508] #func -24 balance_runtime+0x11 (update_curr_rt+0x114) [ 129.892508] #func -24 _spin_lock+0x4 (update_curr_rt+0xe8) [ 129.892508] #func -24 account_group_exec_runtime+0x7 (update_curr_rt+0x51) [ 129.892508] #func -24 update_curr_rt+0xb (put_prev_task_rt+0x1a) [ 129.892508] #func -24 put_prev_task_rt+0x9 (schedule+0x51e) [ 129.892508] #func -24 pre_schedule_rt+0x4 (schedule+0x15a) [ 129.892508] #func -25 dequeue_pushable_task+0x4 (dequeue_task_rt+0x59) [ 129.892508] #func -25 update_rt_migration+0x4 (__dequeue_rt_entity+0x16b) [ 129.892508] #func -25 pick_next_highest_task_rt+0xd (next_prio+0x14) [ 129.892508] #func -25 next_prio+0x4 (__dequeue_rt_entity+0x119) [ 129.892508] #func -25 __dequeue_rt_entity+0xb (dequeue_task_rt+0x45) [ 129.892508] #func -25 balance_runtime+0x11 (update_curr_rt+0x114) [ 130.124508] #func -26 _spin_lock+0x4 (update_curr_rt+0xe8) [ 130.124508] #func -26 account_group_exec_runtime+0x7 (update_curr_rt+0x51) [ 130.124508] #func -26 update_curr_rt+0xb (dequeue_task_rt+0x25) [ 130.124508] #func -26 dequeue_task_rt+0xb (dequeue_task+0x78) [ 130.124508] #func -26 dequeue_task+0x9 (deactivate_task+0x2d) [ 130.124508] #func -26 deactivate_task+0x9 (schedule+0x136) [ 130.124508] #func -27 signal_pending_state+0x4 (schedule+0x114) [ 130.124508] #func -27 update_rq_clock+0x9 (schedule+0xe2) [ 130.124508] | +end 0x80000001 -27 ipipe_check_context+0xdb (raw_local_irq_disable+0x15) [ 130.124508] | +begin 0x80000001 -27 ipipe_check_context+0x32 (raw_local_irq_disable+0x15) [ 130.124508] +func -27 ipipe_check_context+0x11 (raw_local_irq_disable+0x15) [ 130.124508] +func -28 raw_local_irq_disable+0x4 (_spin_lock_irq+0x16) [ 130.124508] +func -28 _spin_lock_irq+0x9 (schedule+0xda) [ 130.124508] | +end 0x80000001 -28 ipipe_check_context+0xdb (schedule+0xa8) [ 130.124508] | +begin 0x80000001 -28 ipipe_check_context+0x32 (schedule+0xa8) [ 130.124508] +func -28 ipipe_check_context+0x11 (schedule+0xa8) [ 130.124508] +func -29 rcu_qsctr_inc+0x4 (schedule+0x63) [ 130.124508] +func -29 schedule+0x14 (xnshadow_harden+0xd7) [ 130.124508] | +end 0x80000000 -29 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 130.124508] | #begin 0x80000000 -29 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 130.124508] #func -29 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 130.292509] | #end 0x80000001 -29 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 130.292509] | #begin 0x80000001 -30 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 130.292509] #func -30 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 130.292509] #func -30 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 130.292509] #func -30 _spin_unlock_irqrestore+0x4 (__wake_up_sync_key+0x4e) [ 130.292509] | #end 0x80000001 -30 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 130.292509] | #begin 0x80000001 -31 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 130.292509] #func -31 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 130.292509] #func -31 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 130.292509] #func -31 _spin_unlock_irqrestore+0x4 (task_rq_unlock+0x11) [ 130.292509] #func -31 task_rq_unlock+0x4 (try_to_wake_up+0x1f6) [ 130.292509] #func -31 task_wake_up_rt+0x9 (try_to_wake_up+0x1e5) [ 130.292509] #func -32 check_preempt_curr_rt+0x7 (check_preempt_curr+0x17) [ 130.292509] #func -32 check_preempt_curr+0x4 (try_to_wake_up+0x1c9) [ 130.292509] #func -32 update_rt_migration+0x4 (enqueue_task_rt+0x15c) [ 130.292509] #func -32 enqueue_task_rt+0x11 (enqueue_task+0x2d) [ 130.292509] #func -32 enqueue_task+0x9 (activate_task+0x2d) [ 130.292509] #func -33 activate_task+0x9 (try_to_wake_up+0x120) [ 130.292509] #func -33 select_task_rq_rt+0x9 (try_to_wake_up+0xcc) [ 130.292509] #func -33 update_rq_clock+0x9 (try_to_wake_up+0x8c) [ 130.292509] #func -33 _spin_lock+0x4 (task_rq_lock+0x6c) [ 130.292509] | #end 0x80000001 -33 ipipe_check_context+0xdb (task_rq_lock+0x29) [ 130.292509] | #begin 0x80000001 -34 ipipe_check_context+0x32 (task_rq_lock+0x29) [ 130.292509] #func -34 ipipe_check_context+0x11 (task_rq_lock+0x29) [ 130.292509] #func -34 task_rq_lock+0xb (try_to_wake_up+0x81) [ 130.292509] #func -34 try_to_wake_up+0x11 (default_wake_function+0x12) [ 130.292509] #func -34 default_wake_function+0x4 (__wake_up_common+0x4e) [ 130.524509] #func -34 __wake_up_common+0x11 (__wake_up_sync_key+0x43) [ 130.524509] | +end 0x80000001 -35 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 130.524509] | +begin 0x80000001 -35 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 130.524509] +func -35 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 130.524509] +func -35 _spin_lock_irqsave+0x9 (__wake_up_sync_key+0x27) [ 130.524509] +func -35 __wake_up_sync_key+0xb (__wake_up_sync+0x10) [ 130.524509] +func -35 __wake_up_sync+0x4 (xnshadow_harden+0xd2) [ 130.524509] | +end 0x80000000 -36 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 130.524509] | #begin 0x80000000 -36 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 130.524509] #func -36 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 130.524509] | #end 0x80000001 -36 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 130.524509] | #begin 0x80000001 -36 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 130.524509] #func -37 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 130.524509] #func -37 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 130.524509] #func -37 _spin_unlock_irqrestore+0x4 (down_interruptible+0x41) [ 130.524509] | +end 0x80000001 -37 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 130.524509] | +begin 0x80000001 -37 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 130.524509] +func -37 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 130.524509] +func -38 _spin_lock_irqsave+0x9 (down_interruptible+0x18) [ 130.692509] +func -38 down_interruptible+0xb (xnshadow_harden+0x70) [ 130.692509] +func -38 xnshadow_harden+0x11 (losyscall_event+0xa2) [ 130.692509] +func -38 losyscall_event+0x11 (__ipipe_dispatch_event+0x1b6) [ 130.692509] | +end 0x80000001 -38 __ipipe_dispatch_event+0x1a4 (__ipipe_syscall_root+0x4f) [ 130.692509] | + begin 0x80000001 -39 __ipipe_dispatch_event+0x1da (__ipipe_syscall_root+0x4f) [ 130.692509] + func -39 hisyscall_event+0x11 (__ipipe_dispatch_event+0x1b6) [ 130.692509] | + end 0x80000001 -39 __ipipe_dispatch_event+0x1a4 (__ipipe_syscall_root+0x4f) [ 130.692509] | +begin 0x80000001 -39 __ipipe_dispatch_event+0x34 (__ipipe_syscall_root+0x4f) [ 130.692509] +func -40 __ipipe_dispatch_event+0x11 (__ipipe_syscall_root+0x4f) [ 130.692509] +func -40 __ipipe_event_monitored_p+0xb (__ipipe_syscall_root+0x3a) [ 130.692509] +func -40 __ipipe_syscall_root+0xb (__ipipe_syscall_root_thunk+0x35) [ 130.692509] +func -41 fput+0x4 (fput_light+0x12) [ 130.692509] +func -41 fput_light+0x4 (sys_write+0x61) [ 130.692509] +func -41 fsnotify+0x11 (fsnotify_modify+0x6c) [ 130.692509] +func -41 inotify_dentry_parent_queue_event+0xb (fsnotify_parent+0x28) [ 130.692509] +func -42 __fsnotify_parent+0xf (fsnotify_parent+0x17) [ 130.692509] +func -42 fsnotify_parent+0x7 (fsnotify_modify+0x54) [ 130.692509] +func -42 inotify_inode_queue_event+0x11 (fsnotify_modify+0x4a) [ 130.692509] +func -42 fsnotify_modify+0xd (vfs_write+0xcf) [ 130.692509] | +end 0x80000000 -42 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 130.692509] | #begin 0x80000000 -43 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 130.692509] #func -43 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 130.692509] | #end 0x80000001 -43 __ipipe_restore_root+0x7c (put_ldisc+0xca) [ 130.692509] | #begin 0x80000001 -43 __ipipe_restore_root+0x2c (put_ldisc+0xca) [ 130.692509] #func -43 __ipipe_restore_root+0xb (put_ldisc+0xca) [ 130.692509] | +end 0x80000001 -44 ipipe_check_context+0xdb (put_ldisc+0x4d) [ 130.692509] | +begin 0x80000001 -44 ipipe_check_context+0x32 (put_ldisc+0x4d) [ 130.692509] +func -44 ipipe_check_context+0x11 (put_ldisc+0x4d) [ 130.924506] +func -44 put_ldisc+0x7 (tty_ldisc_deref+0xe) [ 130.924506] +func -44 tty_ldisc_deref+0x4 (tty_write+0x20d) [ 130.924506] | +end 0x80000000 -44 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 130.924506] | #begin 0x80000000 -45 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 130.924506] #func -45 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 130.924506] | #end 0x80000001 -45 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 130.924506] | #begin 0x80000001 -45 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 130.924506] #func -45 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 130.924506] #func -45 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 130.924506] #func -46 _spin_unlock_irqrestore+0x4 (__wake_up+0x44) [ 130.924506] #func -46 __wake_up_common+0x11 (__wake_up+0x39) [ 130.924506] | +end 0x80000001 -46 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 130.924506] | +begin 0x80000001 -46 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 130.924506] +func -46 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 130.924506] +func -47 _spin_lock_irqsave+0x9 (__wake_up+0x22) [ 130.924506] +func -47 __wake_up+0xb (tty_write_unlock+0x38) [ 130.924506] +func -47 mutex_unlock+0x4 (tty_write_unlock+0x1d) [ 130.924506] +func -47 tty_write_unlock+0x9 (tty_write+0x1fd) [ 130.924506] +func -47 timespec_trunc+0x8 (current_fs_time+0x27) [ 130.924506] +func -47 current_kernel_time+0x8 (current_fs_time+0x16) [ 131.092509] +func -48 current_fs_time+0x9 (tty_write+0x1de) [ 131.092509] | +end 0x80000000 -48 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 131.092509] | #begin 0x80000000 -48 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 131.092509] #func -48 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 131.092509] | #end 0x80000001 -48 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 131.092509] | #begin 0x80000001 -48 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 131.092509] #func -49 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 131.092509] #func -49 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 131.092509] #func -49 _spin_unlock_irqrestore+0x4 (remove_wait_queue+0x45) [ 131.092509] | +end 0x80000001 -49 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 131.092509] | +begin 0x80000001 -49 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 131.092509] +func -50 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 131.092509] +func -50 _spin_lock_irqsave+0x9 (remove_wait_queue+0x17) [ 131.092509] +func -50 remove_wait_queue+0x7 (n_tty_write+0x303) [ 131.092509] | +end 0x80000000 -50 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 131.092509] | #begin 0x80000000 -50 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 131.092509] #func -50 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 131.092509] | #end 0x80000001 -51 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 131.092509] | #begin 0x80000001 -51 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 131.092509] #func -51 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 131.092509] #func -51 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 131.092509] #func -51 _spin_unlock_irqrestore+0x4 (release_console_sem+0x18f) [ 131.092509] | #end 0x80000001 -51 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 131.092509] | #begin 0x80000001 -52 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 131.092509] #func -52 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 131.092509] #func -52 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 131.324507] #func -52 _spin_unlock_irqrestore+0x4 (up+0x39) [ 131.324507] | #end 0x80000001 -52 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 131.324507] | #begin 0x80000001 -53 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 131.324507] #func -53 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 131.324507] #func -53 _spin_lock_irqsave+0x9 (up+0x14) [ 131.324507] #func -53 up+0x7 (release_console_sem+0x180) [ 131.324507] | +end 0x80000001 -53 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 131.324507] | +begin 0x80000001 -53 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 131.324507] +func -54 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 131.324507] +func -54 _spin_lock_irqsave+0x9 (release_console_sem+0x42) [ 131.324507] +func -54 release_console_sem+0xb (con_flush_chars+0x43) [ 131.324507] +func -54 vgacon_set_cursor_size+0x11 (vgacon_cursor+0x13c) [ 131.324507] | +end 0x80000000 -54 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 131.324507] | #begin 0x80000000 -55 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 131.324507] #func -55 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 131.324507] | #end 0x80000001 -55 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 131.324507] | #begin 0x80000001 -55 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 131.324507] #func -55 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 131.324507] #func -55 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 131.324507] #func -56 _spin_unlock_irqrestore+0x4 (write_vga+0x52) [ 131.492510] | +end 0x80000001 -56 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 131.492510] | +begin 0x80000001 -56 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 131.492510] +func -57 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 131.492510] +func -57 _spin_lock_irqsave+0x9 (write_vga+0x1d) [ 131.492510] +func -57 write_vga+0x7 (vgacon_cursor+0x6e) [ 131.492510] +func -57 vgacon_restore_screen+0x4 (vgacon_cursor+0x21) [ 131.492510] +func -57 vgacon_cursor+0x7 (set_cursor+0x63) [ 131.492510] +func -58 add_softcursor+0x4 (set_cursor+0x4a) [ 131.492510] +func -58 set_cursor+0x9 (con_flush_chars+0x3e) [ 131.492510] | +end 0x80000000 -58 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 131.492510] | #begin 0x80000000 -58 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 131.492510] #func -58 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 131.492510] | #end 0x80000001 -58 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 131.492510] | #begin 0x80000001 -59 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 131.492510] #func -59 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 131.492510] #func -59 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 131.492510] #func -59 _spin_unlock_irqrestore+0x4 (down+0x38) [ 131.492510] | +end 0x80000001 -59 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 131.492510] | +begin 0x80000001 -60 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 131.492510] +func -60 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 131.492510] +func -60 _spin_lock_irqsave+0x9 (down+0x14) [ 131.492510] +func -60 down+0x7 (acquire_console_sem+0x30) [ 131.492510] +func -60 acquire_console_sem+0x4 (con_flush_chars+0x2d) [ 131.492510] +func -60 con_flush_chars+0x9 (n_tty_write+0x285) [ 131.492510] +func -61 mutex_unlock+0x4 (process_output+0x48) [ 131.492510] | +end 0x80000000 -61 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 131.492510] | #begin 0x80000000 -61 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 131.492510] #func -61 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 131.724507] | #end 0x80000001 -61 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 131.724507] | #begin 0x80000001 -62 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 131.724507] #func -62 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 131.724507] #func -62 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 131.724507] #func -62 _spin_unlock_irqrestore+0x4 (release_console_sem+0x18f) [ 131.724507] | #end 0x80000001 -62 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 131.724507] | #begin 0x80000001 -62 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 131.724507] #func -63 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 131.724507] #func -63 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 131.724507] #func -63 _spin_unlock_irqrestore+0x4 (up+0x39) [ 131.724507] | #end 0x80000001 -63 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 131.724507] | #begin 0x80000001 -63 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 131.724507] #func -63 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 131.724507] #func -64 _spin_lock_irqsave+0x9 (up+0x14) [ 131.724507] #func -64 up+0x7 (release_console_sem+0x180) [ 131.724507] | +end 0x80000001 -64 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 131.724507] | +begin 0x80000001 -64 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 131.724507] +func -64 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 131.724507] +func -64 _spin_lock_irqsave+0x9 (release_console_sem+0x42) [ 131.892509] +func -65 release_console_sem+0xb (con_flush_chars+0x43) [ 131.892509] | +end 0x80000000 -65 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 131.892509] | #begin 0x80000000 -65 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 131.892509] #func -65 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 131.892509] | #end 0x80000001 -65 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 131.892509] | #begin 0x80000001 -66 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 131.892509] #func -66 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 131.892509] #func -66 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 131.892509] #func -66 _spin_unlock_irqrestore+0x4 (vgacon_set_cursor_size+0x103) [ 131.892509] #func -68 native_io_delay+0x4 (outb_p+0x14) [ 131.892509] #func -68 outb_p+0x4 (vgacon_set_cursor_size+0xf4) [ 131.892509] #func -70 native_io_delay+0x4 (outb_p+0x14) [ 131.892509] #func -70 outb_p+0x4 (vgacon_set_cursor_size+0xe4) [ 131.892509] #func -72 native_io_delay+0x4 (outb_p+0x14) [ 131.892509] #func -72 outb_p+0x4 (vgacon_set_cursor_size+0xd3) [ 131.892509] #func -74 native_io_delay+0x4 (outb_p+0x14) [ 131.892509] #func -74 outb_p+0x4 (vgacon_set_cursor_size+0xb6) [ 131.892509] #func -76 native_io_delay+0x4 (inb_p+0x18) [ 131.892509] #func -76 inb_p+0x8 (vgacon_set_cursor_size+0x9a) [ 131.892509] #func -78 native_io_delay+0x4 (outb_p+0x14) [ 131.892509] #func -78 outb_p+0x4 (vgacon_set_cursor_size+0x8e) [ 131.892509] #func -80 native_io_delay+0x4 (inb_p+0x18) [ 131.892509] #func -80 inb_p+0x8 (vgacon_set_cursor_size+0x79) [ 131.892509] #func -82 native_io_delay+0x4 (outb_p+0x14) [ 131.892509] #func -82 outb_p+0x4 (vgacon_set_cursor_size+0x6d) [ 131.892509] | +end 0x80000001 -83 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 131.892509] | +begin 0x80000001 -83 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 131.892509] +func -83 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 132.124507] +func -83 _spin_lock_irqsave+0x9 (vgacon_set_cursor_size+0x48) [ 132.124507] +func -83 vgacon_set_cursor_size+0x11 (vgacon_cursor+0x13c) [ 132.124507] | +end 0x80000000 -84 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 132.124507] | #begin 0x80000000 -84 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 132.124507] #func -84 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 132.124507] | #end 0x80000001 -84 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 132.124507] | #begin 0x80000001 -84 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 132.124507] #func -84 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 132.124507] #func -85 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 132.124507] #func -85 _spin_unlock_irqrestore+0x4 (write_vga+0x52) [ 132.124507] | +end 0x80000001 -85 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 132.124507] | +begin 0x80000001 -86 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 132.124507] +func -86 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 132.124507] +func -86 _spin_lock_irqsave+0x9 (write_vga+0x1d) [ 132.124507] +func -86 write_vga+0x7 (vgacon_cursor+0x6e) [ 132.124507] +func -86 vgacon_restore_screen+0x4 (vgacon_cursor+0x21) [ 132.124507] +func -86 vgacon_cursor+0x7 (set_cursor+0x63) [ 132.124507] +func -87 add_softcursor+0x4 (set_cursor+0x4a) [ 132.124507] +func -87 set_cursor+0x9 (con_flush_chars+0x3e) [ 132.124507] | +end 0x80000000 -87 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 132.292510] | #begin 0x80000000 -87 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 132.292510] #func -88 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 132.292510] | #end 0x80000001 -88 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 132.292510] | #begin 0x80000001 -88 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 132.292510] #func -88 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 132.292510] #func -88 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 132.292510] #func -88 _spin_unlock_irqrestore+0x4 (down+0x38) [ 132.292510] | +end 0x80000001 -89 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 132.292510] | +begin 0x80000001 -89 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 132.292510] +func -89 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 132.292510] +func -89 _spin_lock_irqsave+0x9 (down+0x14) [ 132.292510] +func -89 down+0x7 (acquire_console_sem+0x30) [ 132.292510] +func -89 acquire_console_sem+0x4 (con_flush_chars+0x2d) [ 132.292510] +func -90 con_flush_chars+0x9 (con_write+0x21) [ 132.292510] +func -90 notify_update+0x8 (do_con_write+0x1b40) [ 132.292510] | +end 0x80000000 -90 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 132.292510] | #begin 0x80000000 -90 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 132.292510] #func -90 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 132.292510] | #end 0x80000001 -91 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 132.292510] | #begin 0x80000001 -91 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 132.292510] #func -91 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 132.292510] #func -91 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 132.292510] #func -91 _spin_unlock_irqrestore+0x4 (release_console_sem+0x18f) [ 132.292510] | #end 0x80000001 -91 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 132.292510] | #begin 0x80000001 -92 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 132.292510] #func -92 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 132.292510] #func -92 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 132.524508] #func -92 _spin_unlock_irqrestore+0x4 (up+0x39) [ 132.524508] | #end 0x80000001 -92 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 132.524508] | #begin 0x80000001 -92 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 132.524508] #func -93 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 132.524508] #func -93 _spin_lock_irqsave+0x9 (up+0x14) [ 132.524508] #func -93 up+0x7 (release_console_sem+0x180) [ 132.524508] | +end 0x80000001 -93 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 132.524508] | +begin 0x80000001 -93 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 132.524508] +func -94 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 132.524508] +func -94 _spin_lock_irqsave+0x9 (release_console_sem+0x42) [ 132.524508] +func -94 release_console_sem+0xb (do_con_write+0x1b38) [ 132.524508] +func -94 _cond_resched+0x4 (console_conditional_schedule+0x17) [ 132.524508] +func -94 console_conditional_schedule+0x4 (do_con_write+0x1b33) [ 132.524508] +func -94 notify_write+0x8 (lf+0x52) [ 132.524508] +func -95 lf+0x9 (do_con_write+0x8a0) [ 132.524508] +func -95 notify_write+0x8 (cr+0x2c) [ 132.524508] +func -95 cr+0x4 (do_con_write+0x8bc) [ 132.524508] | +end 0x80000000 -95 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 132.524508] | #begin 0x80000000 -95 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 132.524508] #func -96 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 132.524508] | #end 0x80000001 -96 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 132.692509] | #begin 0x80000001 -96 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 132.692509] #func -96 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 132.692509] #func -96 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 132.692509] #func -96 _spin_unlock_irqrestore+0x4 (vgacon_set_cursor_size+0x103) [ 132.692509] #func -98 native_io_delay+0x4 (outb_p+0x14) [ 132.692509] #func -98 outb_p+0x4 (vgacon_set_cursor_size+0xf4) [ 132.692509] #func -100 native_io_delay+0x4 (outb_p+0x14) [ 132.692509] #func -101 outb_p+0x4 (vgacon_set_cursor_size+0xe4) [ 132.692509] #func -102 native_io_delay+0x4 (outb_p+0x14) [ 132.692509] #func -103 outb_p+0x4 (vgacon_set_cursor_size+0xd3) [ 132.692509] #func -104 native_io_delay+0x4 (outb_p+0x14) [ 132.692509] #func -105 outb_p+0x4 (vgacon_set_cursor_size+0xb6) [ 132.692509] #func -106 native_io_delay+0x4 (inb_p+0x18) [ 132.692509] #func -107 inb_p+0x8 (vgacon_set_cursor_size+0x9a) [ 132.692509] #func -108 native_io_delay+0x4 (outb_p+0x14) [ 132.692509] #func -109 outb_p+0x4 (vgacon_set_cursor_size+0x8e) [ 132.692509] #func -110 native_io_delay+0x4 (inb_p+0x18) [ 132.692509] #func -111 inb_p+0x8 (vgacon_set_cursor_size+0x79) [ 132.692509] #func -113 native_io_delay+0x4 (outb_p+0x14) [ 132.692509] #func -113 outb_p+0x4 (vgacon_set_cursor_size+0x6d) [ 132.692509] | +end 0x80000001 -113 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 132.692509] | +begin 0x80000001 -113 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 132.692509] +func -113 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 132.692509] +func -114 _spin_lock_irqsave+0x9 (vgacon_set_cursor_size+0x48) [ 132.692509] +func -114 vgacon_set_cursor_size+0x11 (vgacon_cursor+0x13c) [ 132.692509] | +end 0x80000000 -114 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 132.692509] | #begin 0x80000000 -114 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 132.692509] #func -114 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 132.924507] | #end 0x80000001 -115 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 132.924507] | #begin 0x80000001 -115 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 132.924507] #func -115 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 132.924507] #func -115 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 132.924507] #func -115 _spin_unlock_irqrestore+0x4 (write_vga+0x52) [ 132.924507] | +end 0x80000001 -116 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 132.924507] | +begin 0x80000001 -116 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 132.924507] +func -116 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 132.924507] +func -116 _spin_lock_irqsave+0x9 (write_vga+0x1d) [ 132.924507] +func -117 write_vga+0x7 (vgacon_cursor+0x51) [ 132.924507] +func -117 vgacon_restore_screen+0x4 (vgacon_cursor+0x21) [ 132.924507] +func -117 vgacon_cursor+0x7 (hide_cursor+0x2e) [ 132.924507] +func -117 hide_cursor+0x9 (do_con_write+0xfc) [ 132.924507] | +end 0x80000000 -117 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 132.924507] | #begin 0x80000000 -117 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 132.924507] #func -118 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 132.924507] | #end 0x80000001 -118 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 132.924507] | #begin 0x80000001 -118 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 132.924507] #func -118 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 132.924507] #func -118 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 133.092509] #func -118 _spin_unlock_irqrestore+0x4 (down+0x38) [ 133.092509] | +end 0x80000001 -119 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 133.092509] | +begin 0x80000001 -119 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 133.092509] +func -119 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 133.092509] +func -119 _spin_lock_irqsave+0x9 (down+0x14) [ 133.092509] +func -119 down+0x7 (acquire_console_sem+0x30) [ 133.092509] +func -120 acquire_console_sem+0x4 (do_con_write+0x5e) [ 133.092509] +func -120 _cond_resched+0x4 (do_con_write+0x59) [ 133.092509] | +end 0x80000001 -120 ipipe_check_context+0xdb (do_con_write+0x54) [ 133.092509] | +begin 0x80000001 -120 ipipe_check_context+0x32 (do_con_write+0x54) [ 133.092509] +func -120 ipipe_check_context+0x11 (do_con_write+0x54) [ 133.092509] +func -120 do_con_write+0x14 (con_write+0x16) [ 133.092509] +func -121 con_write+0x9 (do_output_char+0x8b) [ 133.092509] +func -121 do_output_char+0x9 (process_output+0x3d) [ 133.092509] +func -121 con_write_room+0x4 (tty_write_room+0x1d) [ 133.092509] +func -121 tty_write_room+0x4 (process_output+0x2f) [ 133.092509] +func -121 _cond_resched+0x4 (mutex_lock+0x22) [ 133.092509] | +end 0x80000001 -121 ipipe_check_context+0xdb (mutex_lock+0x1d) [ 133.092509] | +begin 0x80000001 -122 ipipe_check_context+0x32 (mutex_lock+0x1d) [ 133.092509] +func -122 ipipe_check_context+0x11 (mutex_lock+0x1d) [ 133.092509] +func -122 mutex_lock+0x9 (process_output+0x27) [ 133.092509] +func -122 process_output+0xd (n_tty_write+0x260) [ 133.092509] +func -122 mutex_unlock+0x4 (n_tty_write+0x234) [ 133.092509] | +end 0x80000000 -122 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 133.092509] | #begin 0x80000000 -123 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 133.092509] #func -123 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 133.092509] | #end 0x80000001 -123 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 133.092509] | #begin 0x80000001 -123 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 133.324507] #func -123 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 133.324507] #func -124 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 133.324507] #func -124 _spin_unlock_irqrestore+0x4 (release_console_sem+0x18f) [ 133.324507] | #end 0x80000001 -124 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 133.324507] | #begin 0x80000001 -124 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 133.324507] #func -124 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 133.324507] #func -124 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 133.324507] #func -125 _spin_unlock_irqrestore+0x4 (up+0x39) [ 133.324507] | #end 0x80000001 -125 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 133.324507] | #begin 0x80000001 -125 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 133.324507] #func -125 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 133.324507] #func -125 _spin_lock_irqsave+0x9 (up+0x14) [ 133.324507] #func -125 up+0x7 (release_console_sem+0x180) [ 133.324507] | +end 0x80000001 -126 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 133.324507] | +begin 0x80000001 -126 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 133.324507] +func -126 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 133.324507] +func -126 _spin_lock_irqsave+0x9 (release_console_sem+0x42) [ 133.324507] +func -126 release_console_sem+0xb (con_flush_chars+0x43) [ 133.324507] | +end 0x80000000 -127 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 133.324507] | #begin 0x80000000 -127 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 133.492509] #func -127 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 133.492509] | #end 0x80000001 -127 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 133.492509] | #begin 0x80000001 -127 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 133.492509] #func -127 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 133.492509] #func -128 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 133.492509] #func -128 _spin_unlock_irqrestore+0x4 (vgacon_set_cursor_size+0x103) [ 133.492509] #func -130 native_io_delay+0x4 (outb_p+0x14) [ 133.492509] #func -130 outb_p+0x4 (vgacon_set_cursor_size+0xf4) [ 133.492509] #func -132 native_io_delay+0x4 (outb_p+0x14) [ 133.492509] #func -132 outb_p+0x4 (vgacon_set_cursor_size+0xe4) [ 133.492509] #func -134 native_io_delay+0x4 (outb_p+0x14) [ 133.492509] #func -134 outb_p+0x4 (vgacon_set_cursor_size+0xd3) [ 133.492509] #func -136 native_io_delay+0x4 (outb_p+0x14) [ 133.492509] #func -136 outb_p+0x4 (vgacon_set_cursor_size+0xb6) [ 133.492509] #func -138 native_io_delay+0x4 (inb_p+0x18) [ 133.492509] #func -138 inb_p+0x8 (vgacon_set_cursor_size+0x9a) [ 133.492509] #func -140 native_io_delay+0x4 (outb_p+0x14) [ 133.492509] #func -140 outb_p+0x4 (vgacon_set_cursor_size+0x8e) [ 133.492509] #func -142 native_io_delay+0x4 (inb_p+0x18) [ 133.492509] #func -142 inb_p+0x8 (vgacon_set_cursor_size+0x79) [ 133.492509] #func -144 native_io_delay+0x4 (outb_p+0x14) [ 133.492509] #func -144 outb_p+0x4 (vgacon_set_cursor_size+0x6d) [ 133.492509] | +end 0x80000001 -144 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 133.492509] | +begin 0x80000001 -145 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 133.492509] +func -145 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 133.492509] +func -145 _spin_lock_irqsave+0x9 (vgacon_set_cursor_size+0x48) [ 133.492509] +func -145 vgacon_set_cursor_size+0x11 (vgacon_cursor+0x13c) [ 133.492509] | +end 0x80000000 -145 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 133.724507] | #begin 0x80000000 -146 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 133.724507] #func -146 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 133.724507] | #end 0x80000001 -146 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 133.724507] | #begin 0x80000001 -146 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 133.724507] #func -146 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 133.724507] #func -146 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 133.724507] #func -147 _spin_unlock_irqrestore+0x4 (write_vga+0x52) [ 133.724507] | +end 0x80000001 -147 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 133.792071] | +begin 0x80000001 -147 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 133.792071] +func -148 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 133.792071] +func -148 _spin_lock_irqsave+0x9 (write_vga+0x1d) [ 133.792071] +func -148 write_vga+0x7 (vgacon_cursor+0x6e) [ 133.792071] +func -148 vgacon_restore_screen+0x4 (vgacon_cursor+0x21) [ 133.792071] +func -148 vgacon_cursor+0x7 (set_cursor+0x63) [ 133.792071] +func -149 add_softcursor+0x4 (set_cursor+0x4a) [ 133.792071] +func -149 set_cursor+0x9 (con_flush_chars+0x3e) [ 133.792071] | +end 0x80000000 -149 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 133.792071] | #begin 0x80000000 -149 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 133.792071] #func -149 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 133.792071] | #end 0x80000001 -149 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 133.892509] | #begin 0x80000001 -150 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 133.892509] #func -150 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 133.892509] #func -150 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 133.892509] #func -150 _spin_unlock_irqrestore+0x4 (down+0x38) [ 133.892509] | +end 0x80000001 -150 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 133.892509] | +begin 0x80000001 -151 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 133.892509] +func -151 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 133.892509] +func -151 _spin_lock_irqsave+0x9 (down+0x14) [ 133.892509] +func -151 down+0x7 (acquire_console_sem+0x30) [ 133.892509] +func -151 acquire_console_sem+0x4 (con_flush_chars+0x2d) [ 133.892509] +func \r [ 4>33 184089] 09a2 0015qc timeout (cmd 0xa0) on_flush_chars+0x9co\r_write+0x21[ 4>33 1936292509a2)\r0: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 133.892509] [ 41[ .938.81]50ta 00: irq_stat 0x40000001 + [ 4>34.0333892 a9]2.un: c a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 34 04 6] cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -134 004368] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout) otify_update+0x8d con_write+0x1b40< >[34103.409]09ta)\r00: status: { DRDY ERR } [ 133.892509] |< [341332897]09ta : hard resetting link +end 0x80000000 -152 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 133.892509] | #begin 0x80000000 -152 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 133.892509] #func -152 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 133.892509] | #end 0x80000001 -152 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 133.892509] | #begin 0x80000001 -152 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 133.892509] #func -153 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 133.892509] #func -153 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 133.892509] #func -153 _spin_unlock_irqrestore+0x4 (release_console_sem+0x18f) [ 133.892509] | #end 0x80000001 -153 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 133.892509] | #begin 0x80000001 -153 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 134.124509] #func -153 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 134.124509] #func -154 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 134.124509] #func -154 _spin_unlock_irqrestore+0x4 (up+0x39) [ 134.124509] | #end 0x80000001 -154 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 134.124509] | #begin 0x80000001 -154 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 134.124509] #func -154 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 134.124509] #func -155 _spin_lock_irqsave+0x9 (up+0x14) [ 134.124509] #func -155 up+0x7 (release_console_sem+0x180) [ 134.124509] | +end 0x80000001 -155 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 134.124509] | +begin 0x80000001 -155 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 134.124509] +func -155 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 134.124509] +func -155 _spin_lock_irqsave+0x9 (release_console_sem+0x42) [ 134.124509] +func -156 release_console_sem+0xb (do_con_write+0x1b38) [ 134.124509] +func -156 _cond_resched+0x4 (console_conditional_schedule+0x17) [ 134.124509] +func -156 console_conditional_schedule+0x4 (do_con_write+0x1b33) [ 134.124509] +func -156 vgacon_dummy+0x4 (do_con_write+0x1b2e) [ 134.124509] +func -156 notify_write+0x8 (do_con_write+0x6f1) [ 134.124509] +func -157 conv_uni_to_pc+0x4 (do_con_write+0x464) [ 134.124509] +func -157 notify_write+0x8 (do_con_write+0x6f1) [ 134.124509] +func -157 conv_uni_to_pc+0x4 (do_con_write+0x464) [ 134.124509] +func -157 notify_write+0x8 (do_con_write+0x6f1) [ 134.293015] +func -158 conv_uni_to_pc+0x4 (do_con_write+0x464) [ 134.293015] +func -158 notify_write+0x8 (do_con_write+0x6f1) [ 134.293015] +func -158 conv_uni_to_pc+0x4 (do_con_write+0x464) [ 134.293015] +func -158 notify_write+0x8 (do_con_write+0x6f1) [ 134.293015] +func -159 conv_uni_to_pc+0x4 (do_con_write+0x464) [ 134.293015] +func -159 notify_write+0x8 (do_con_write+0x6f1) [ 134.293015] +func -159 conv_uni_to_pc+0x4 (do_con_write+0x464) [ 134.293015] +func [ 4>34.334040]01ta S1TA link up 1.5 Gbps (SStatus 113 SControl 300) otify_write+0x8)o con_write+0x6f1[ 134.293015] +func -160 conv_uni_to_pc+0x4 (do_con_write+0x464) [ 134.293015] +func -160 notify_write+0x8 (do_con_write+0x6f1) [ 134.293015] +func -160 conv_uni_to_pc+0x4 (do_con_write+0x464) [ 134.293015] | +end 0x80000000 -161 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 134.293015] | #begin 0x80000000 -161 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 134.293015] #func -161 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 134.293015] | #end 0x80000001 -161 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 134.293015] | #begin 0x80000001 -161 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 134.293015] #func -162 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 134.293015] #func -162 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 134.293015] #func -162 _spin_unlock_irqrestore+0x4 (vgacon_set_cursor_size+0x103) [ 134.293015] #func -164 native_io_delay+0x4 (outb_p+0x14) [ 134.293015] #func -164 outb_p+0x4 (vgacon_set_cursor_size+0xf4) [ 134.293015] #func -166 native_io_delay+0x4 (outb_p+0x14) [ 134.293015] #func -166 outb_p+0x4 (vgacon_set_cursor_size+0xe4) [ 134.293015] #func -168 native_io_delay+0x4 (outb_p+0x14) [ 134.293015] #func -168 outb_p+0x4 (vgacon_set_cursor_size+0xd3) [ 134.293015] #func -170 native_io_delay+0x4 (outb_p+0x14) [ 134.293015] #func -170 outb_p+0x4 (vgacon_set_cursor_size+0xb6) [ 134.293015] #func -172 native_io_delay+0x4 (inb_p+0x18) [ 134.524508] #func -172 inb_p+0x8 (vgacon_set_cursor_size+0x9a) [ 134.524508] #func -174 native_io_delay+0x4 (outb_p+0x14) [ 134.524508] #func -174 outb_p+0x4 (vgacon_set_cursor_size+0x8e) [ 134.524508] #func -176 native_io_delay+0x4 (inb_p+0x18) [ 134.524508] #func -176 inb_p+0x8 (vgacon_set_cursor_size+0x79) [ 134.524508] #func -178 native_io_delay+0x4 (outb_p+0x14) [ 134.524508] #func -178 outb_p+0x4 (vgacon_set_cursor_size+0x6d) [ 134.524508] | +end 0x80000001 -178 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 134.524508] | +begin 0x80000001 -179 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 134.524508] +func -179 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 134.524508] +func -179 _spin_lock_irqsave+0x9 (vgacon_set_cursor_size+0x48) [ 134.524508] +func -179 vgacon_set_cursor_size+0x11 (vgacon_cursor+0x13c) [ 134.524508] | +end 0x80000000 -179 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 134.524508] | #begin 0x80000000 -180 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 134.524508] #func -180 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 134.524508] | #end 0x80000001 -180 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 134.524508] | #begin 0x80000001 -180 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 134.524508] #func -180 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 134.524508] #func -180 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 134.524508] #func -181 _spin_unlock_irqrestore+0x4 (write_vga+0x52) [ 134.693013] | +end 0x80000001 -181 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 134.693013] | +begin 0x80000001 -181 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 134.693013] +func -182 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 134.693013] +func -182 _spin_lock_irqsave+0x9 (write_vga+0x1d) [ 134.693013] +func -182 write_vga+0x7 (vgacon_cursor+0x51) [ 134.693013] +func -182 vgacon_restore_screen+0x4 (vgacon_cursor+0x21) [ 134.693013] +func -182 vgacon_cursor+0x7 (hide_cursor+0x2e) [ 134.693013] +func -182 hide_cursor+0x9 (do_con_write+0xfc) [ 134.693013] | +end 0x80000000 -183 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 134.693013] | #begin 0x80000000 -183 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 134.693013] #func -183 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 134.693013] | #end 0x80000001 -183 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 134.693013] | #begin 0x80000001 -183 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 134.693013] #func -184 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 134.693013] #func -184 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 134.693013] #func -184 _spin_unlock_irqrestore+0x4 (down+0x38) [ 134.693013] | +end 0x80000001 -184 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 134.693013] | +begin 0x80000001 -184 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 134.693013] +func -184 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 134.693013] +func -185 _spin_lock_irqsave+0x9 (down+0x14) [ 134.693013] +func -185 down+0x7 (acquire_console_sem+0x30) [ 134.693013] +func -185 acquire_console_sem+0x4 (do_con_write+0x5e) [ 134.693013] +func -185 _cond_resched+0x4 (do_con_write+0x59) [ 134.693013] | +end 0x80000001 -185 ipipe_check_context+0xdb (do_con_write+0x54) [ 134.693013] | +begin 0x80000001 -186 ipipe_check_context+0x32 (do_con_write+0x54) [ 134.693013] +func -186 ipipe_check_context+0x11 (do_con_write+0x54) [ 134.693013] +func -186 do_con_write+0x14 (con_write+0x16) [ 134.693013] +func -186 con_write+0x9 (n_tty_write+0x228) [ 134.924508] +func -186 con_write_room+0x4 (tty_write_room+0x1d) [ 134.924508] +func -186 tty_write_room+0x4 (n_tty_write+0x120) [ 134.924508] +func -187 _cond_resched+0x4 (mutex_lock+0x22) [ 134.924508] | +end 0x80000001 -187 ipipe_check_context+0xdb (mutex_lock+0x1d) [ 134.924508] | +begin 0x80000001 -187 ipipe_check_context+0x32 (mutex_lock+0x1d) [ 134.924508] +func -187 ipipe_check_context+0x11 (mutex_lock+0x1d) [ 134.924508] +func -187 mutex_lock+0x9 (n_tty_write+0x118) [ 134.924508] +func -188 tty_hung_up_p+0x4 (n_tty_write+0xce) [ 134.924508] | +end 0x80000000 -188 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 134.924508] | #begin 0x80000000 -188 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 134.924508] #func -188 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 134.924508] | #end 0x80000001 -188 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 134.924508] | #begin 0x80000001 -188 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 134.924508] #func -189 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 134.924508] #func -189 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 134.924508] #func -189 _spin_unlock_irqrestore+0x4 (add_wait_queue+0x44) [ 134.924508] | +end 0x80000001 -189 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 134.924508] | +begin 0x80000001 -189 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 134.924508] +func -190 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 134.924508] +func -190 _spin_lock_irqsave+0x9 (add_wait_queue+0x1a) [ 135.093014] +func -190 add_wait_queue+0x7 (n_tty_write+0x91) [ 135.093014] +func -190 process_echoes+0x11 (n_tty_write+0x7a) [ 135.093014] +func -190 n_tty_write+0x11 (tty_write+0x18f) [ 135.093014] +func -190 mutex_trylock+0x4 (tty_write_lock+0x1e) [ 135.093014] +func -191 tty_write_lock+0x7 (tty_write+0xc5) [ 135.093014] | +end 0x80000000 -191 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 135.093014] | #begin 0x80000000 -191 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 135.093014] #func -191 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 135.093014] | #end 0x80000001 -191 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 135.093014] | #begin 0x80000001 -192 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 135.093014] #func -192 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 135.093014] #func -192 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 135.093014] #func < >[351399198]13ta 0092configured for UDMA/100 spin_unlock_irqrestore+0x4tty_ldisc_try+0x45) [ 135.197013] | +end 0x80000001 -192 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 135.197013] | +begin 0x80000001 -193 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 135.197013] +func -193 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 135.197013] +func -193 _spin_lock_irqsave+0x9 (tty_ldisc_try+0x1d) [ 135.197013] +func -193 tty_ldisc_try+0x7 (tty_ldisc_ref_wait+0x18) [ 135.197013] +func -193 tty_ldisc_ref_wait+0xb (tty_write+0x93) [ 135.197013] +func -193 tty_paranoia_check+0x4 (tty_write+0x3e) [ 135.197013] +func -194 tty_write+0x11 (vfs_write+0xaa) [ 135.197013] +func -194 rw_verify_area+0x9 (vfs_write+0x87) [ 135.197013] +func -194 vfs_write+0xd (sys_write+0x4a) [ 135.197013] +func -194 fget_light+0x4 (sys_write+0x20) [ 135.197013] +func -194 sys_write+0xb (system_call_fastpath+0x16) [ 135.197013] | +end 0x80000001 -194 __ipipe_syscall_root+0x16c (__ipipe_syscall_root_thunk+0x35) [ 135.197013] | +begin 0x80000001 -195 __ipipe_syscall_root+0x104 (__ipipe_syscall_root_thunk+0x35) [ 135.197013] | +end 0x80000001 -195 __ipipe_syscall_root+0xbb (__ipipe_syscall_root_thunk+0x35) [ 135.324508] | +begin 0x80000001 -195 __ipipe_syscall_root+0x6b (__ipipe_syscall_root_thunk+0x35) [ 135.324508] | +end 0x80000001 -195 __ipipe_dispatch_event+0x4b0 (__ipipe_syscall_root+0x4f) [ 135.324508] | +begin 0x80000001 -195 __ipipe_dispatch_event+0x1da (__ipipe_syscall_root+0x4f) [ 135.324508] +func -196 losyscall_event+0x11 (__ipipe_dispatch_event+0x1b6) [ 135.324508] | +end 0x80000001 -196 __ipipe_dispatch_event+0x1a4 (__ipipe_syscall_root+0x4f) [ 135.324508] | +begin 0x80000001 -196 __ipipe_dispatch_event+0x1da (__ipipe_syscall_root+0x4f) [ 135.324508] | +end 0x80000000 -196 __ipipe_unstall_root+0xd1 (raw_local_irq_enable+0xe) [ 135.324508] | #begin 0x80000000 -197 __ipipe_unstall_root+0x20 (raw_local_irq_enable+0xe) [ 135.324508] #func -197 __ipipe_unstall_root+0x9 (raw_local_irq_enable+0xe) [ 135.324508] #func -197 raw_local_irq_enable+0x4 (finish_task_switch+0x6a) [ 135.324508] #func -197 perf_counter_task_sched_in+0x7 (finish_task_switch+0x63) [ 135.324508] #func -197 needs_post_schedule_rt+0x4 (finish_task_switch+0x3d) [ 135.324508] #func -197 finish_task_switch+0x11 (ipipe_reenter_root+0x30) [ 135.324508] #func -198 ipipe_reenter_root+0x7 (xnshadow_relax+0xc8) [ 135.324508] | #end 0x80000000 -198 __ipipe_restore_pipeline_head+0xfa (ipipe_restore_pipeline_head+0x66) [ 135.324508] | *#func -198 __ipipe_restore_pipeline_head+0x7 (ipipe_restore_pipeline_head+0x66) [ 135.324508] | *#func -198 ipipe_restore_pipeline_head+0x7 (xnshadow_relax+0x90) [ 135.324508] | *#func -198 ipipe_restore_pipeline_head+0x7 (T.622+0x24) [ 135.493016] | *#func -199 T.622+0x4 (xnpod_suspend_thread+0x1a0) [ 135.493016] | *#func -199 ipipe_restore_pipeline_head+0x7 (T.622+0x24) [ 135.493016] | *#func -199 T.622+0x4 (__xnpod_schedule+0x69f) [ 135.493016] | #func -199 ipipe_test_and_stall_pipeline_head+0x9 (T.625+0xe) [ 135.493016] | #func -199 T.625+0x4 (__xnpod_schedule+0x696) [ 135.493016] | #func -200 __unlazy_fpu+0x4 (__switch_to+0x17e) [ 135.493016] | #func -200 __switch_to+0xb (__xnpod_schedule+0x483) [ 135.493016] | #begin 0x80000000 -200 schedule+0x5d3 (gatekeeper_thread+0x10d) [ 135.493016] | #end 0x80000001 -200 __ipipe_dispatch_event+0x4b0 (schedule+0x5c1) [ 135.493016] | #begin 0x80000001 -201 __ipipe_dispatch_event+0x1da (schedule+0x5c1) [ 135.493016] | #end 0x80000001 -201 ipipe_trigger_irq+0x80 (__xnpod_schedule+0xa0) [ 135.493016] | #func -201 __ipipe_walk_pipeline+0x11 (__ipipe_dispatch_wired_nocheck+0x1d8) [ 135.493016] | #*func -201 ipipe_restore_pipeline_head+0x7 (T.622+0x24) [ 135.493016] | #*func -201 T.622+0x4 (__xnpod_schedule+0x69f) [ 135.493016] | #*func -202 xnsched_pick_next+0x4 (__xnpod_schedule+0x129) [ 135.493016] | #*func -202 T.623+0x4 (__xnpod_schedule+0xf0) [ 135.493016] | #*[ 350] gatekee 99 -202 __xnpod_schedule+0xd2 (xnpod_schedule+0x32) [ 135.493016] | #*func -202 ipipe_test_and_stall_pipeline_head+0x9 (T.625+0xe) [ 135.493016] | #*func -202 T.625+0x4 (__xnpod_schedule+0xaa) [ 135.493016] | #*func -203 __xnpod_schedule+0x11 (xnpod_schedule+0x32) [ 135.493016] | #*func -203 xnpod_schedule+0x4 (xnpod_schedule_handler+0x59) [ 135.493016] | #*func -203 xnpod_schedule_handler+0x7 (__ipipe_dispatch_wired_nocheck+0x127) [ 135.493016] | #func -203 __ipipe_dispatch_wired_nocheck+0x11 (__ipipe_dispatch_wired+0xc3) [ 135.493016] | #func -203 __ipipe_dispatch_wired+0xd (__ipipe_handle_irq+0x128) [ 135.493016] | #func -204 __ipipe_handle_irq+0x11 (ipipe_trigger_irq+0x71) [ 135.493016] | #begin 0x80000001 -204 ipipe_trigger_irq+0x52 (__xnpod_schedule+0xa0) [ 135.493016] #func -204 ipipe_trigger_irq+0x10 (__xnpod_schedule+0xa0) [ 135.493016] | #end 0x80000001 -204 __xnpod_schedule+0x8a (xnpod_schedule+0x32) [ 135.724509] | #begin 0x80000001 -204 __xnpod_schedule+0x3a (xnpod_schedule+0x32) [ 135.724509] #func -204 __xnpod_schedule+0x11 (xnpod_schedule+0x32) [ 135.724509] #func -205 xnpod_schedule+0x4 (schedule_event+0x2ef) [ 135.724509] | #end 0x80000000 -205 __ipipe_restore_pipeline_head+0xfa (T.513+0x7b) [ 135.724509] | *#func -205 __ipipe_restore_pipeline_head+0x7 (T.513+0x7b) [ 135.724509] | *#func -205 T.513+0x7 (xnsched_renice_root+0x5c) [ 135.724509] | *#[ 350] gatekee 99 -205 xnsched_renice_root+0x54 (schedule_event+0x2ea) [ 135.724509] | *#func -205 xnsched_track_policy+0x4 (xnsched_renice_root+0x3b) [ 135.724509] | #begin 0x80000000 -206 T.515+0x20 (xnsched_renice_root+0x25) [ 135.724509] #func -206 T.515+0x9 (xnsched_renice_root+0x25) [ 135.724509] #func -206 xnsched_renice_root+0xd (schedule_event+0x2ea) [ 135.724509] #func -206 schedule_event+0x11 (__ipipe_dispatch_event+0x1b6) [ 135.724509] | #end 0x80000001 -206 __ipipe_dispatch_event+0x1a4 (schedule+0x5c1) [ 135.724509] | #begin 0x80000001 -207 __ipipe_dispatch_event+0x34 (schedule+0x5c1) [ 135.724509] #func -207 __ipipe_dispatch_event+0x11 (schedule+0x5c1) [ 135.724509] #func -207 __ipipe_event_monitored_p+0xb (schedule+0x5af) [ 135.724509] #func -207 perf_counter_task_sched_out+0x11 (schedule+0x57c) [ 135.724509] #func -207 dequeue_pushable_task+0x4 (pick_next_task_rt+0x7a) [ 135.724509] #func -208 pick_next_task_rt+0x9 (schedule+0x54f) [ 135.724509] #func -208 balance_runtime+0x11 (update_curr_rt+0x114) [ 135.724509] #func -208 _spin_lock+0x4 (update_curr_rt+0xe8) [ 135.893013] #func -208 account_group_exec_runtime+0x7 (update_curr_rt+0x51) [ 135.893013] #func -208 update_curr_rt+0xb (put_prev_task_rt+0x1a) [ 135.893013] #func -208 put_prev_task_rt+0x9 (schedule+0x51e) [ 135.893013] #func -209 pre_schedule_rt+0x4 (schedule+0x15a) [ 135.893013] #func -209 dequeue_pushable_task+0x4 (dequeue_task_rt+0x59) [ 135.893013] #func -209 update_rt_migration+0x4 (__dequeue_rt_entity+0x16b) [ 135.893013] #func -209 pick_next_highest_task_rt+0xd (next_prio+0x14) [ 135.893013] #func -209 next_prio+0x4 (__dequeue_rt_entity+0x119) [ 135.893013] #func -209 __dequeue_rt_entity+0xb (dequeue_task_rt+0x45) [ 135.893013] #func -210 balance_runtime+0x11 (update_curr_rt+0x114) [ 135.893013] #func -210 _spin_lock+0x4 (update_curr_rt+0xe8) [ 135.893013] #func -210 account_group_exec_runtime+0x7 (update_curr_rt+0x51) [ 135.893013] #func -210 update_curr_rt+0xb (dequeue_task_rt+0x25) [ 135.893013] #func -210 dequeue_task_rt+0xb (dequeue_task+0x78) [ 135.893013] #func -211 dequeue_task+0x9 (deactivate_task+0x2d) [ 135.893013] #func -211 deactivate_task+0x9 (schedule+0x136) [ 135.893013] #func -211 signal_pending_state+0x4 (schedule+0x114) [ 135.893013] #func -211 update_rq_clock+0x9 (schedule+0xe2) [ 135.893013] | +end 0x80000001 -211 ipipe_check_context+0xdb (raw_local_irq_disable+0x15) [ 135.893013] | +begin 0x80000001 -212 ipipe_check_context+0x32 (raw_local_irq_disable+0x15) [ 135.893013] +func -212 ipipe_check_context+0x11 (raw_local_irq_disable+0x15) [ 135.893013] +func -212 raw_local_irq_disable+0x4 (_spin_lock_irq+0x16) [ 135.893013] +func -212 _spin_lock_irq+0x9 (schedule+0xda) [ 135.893013] | +end 0x80000001 -212 ipipe_check_context+0xdb (schedule+0xa8) [ 135.893013] | +begin 0x80000001 -212 ipipe_check_context+0x32 (schedule+0xa8) [ 135.893013] +func -213 ipipe_check_context+0x11 (schedule+0xa8) [ 135.893013] +func -213 rcu_qsctr_inc+0x4 (schedule+0x63) [ 135.893013] +func -213 schedule+0x14 (gatekeeper_thread+0x10d) [ 135.893013] | +end 0x80000000 -213 __ipipe_unstall_root+0xd1 (__ipipe_restore_root+0xaf) [ 136.124507] | #begin 0x80000000 -213 __ipipe_unstall_root+0x20 (__ipipe_restore_root+0xaf) [ 136.124507] #func -214 __ipipe_unstall_root+0x9 (__ipipe_restore_root+0xaf) [ 136.124507] | #end 0x80000001 -214 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 136.124507] | #begin 0x80000001 -214 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 136.124507] #func -214 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 136.124507] #func -214 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 136.124507] #func -214 _spin_unlock_irqrestore+0x4 (up+0x39) [ 136.124507] | +end 0x80000001 -215 ipipe_check_context+0xdb (_spin_lock_irqsave+0x1d) [ 136.124507] | +begin 0x80000001 -215 ipipe_check_context+0x32 (_spin_lock_irqsave+0x1d) [ 136.124507] +func -215 ipipe_check_context+0x11 (_spin_lock_irqsave+0x1d) [ 136.124507] +func -215 _spin_lock_irqsave+0x9 (up+0x14) [ 136.124507] +func -215 up+0x7 (gatekeeper_thread+0x108) [ 136.124507] | +end 0x80000001 -216 ipipe_trigger_irq+0x80 (__xnpod_schedule+0xa0) [ 136.124507] #func -216 idle_cpu+0x4 (irq_exit+0x62) [ 136.124507] #func -216 rcu_irq_exit+0x4 (irq_exit+0x55) [ 136.124507] | #end 0x80000001 -216 ipipe_check_context+0xdb (irq_exit+0x15) [ 136.124507] | #begin 0x80000001 -217 ipipe_check_context+0x32 (irq_exit+0x15) [ 136.124507] #func -217 ipipe_check_context+0x11 (irq_exit+0x15) [ 136.124507] #func -217 irq_exit+0x4 (__xirq_end+0x82) [ 136.124507] | #end 0x80000001 -217 __ipipe_restore_root+0x7c (raw_local_irq_restore+0x19) [ 136.293014] | #begin 0x80000001 -217 __ipipe_restore_root+0x2c (raw_local_irq_restore+0x19) [ 136.293014] #func -217 __ipipe_restore_root+0xb (raw_local_irq_restore+0x19) [ 136.293014] #func -218 raw_local_irq_restore+0x4 (_spin_unlock_irqrestore+0x16) [ 136.293014] #func -218 _spin_unlock_irqrestore+0x4 (task_rq_unlock+0x11) [ 136.293014] #func -218 task_rq_unlock+0x4 (try_to_wake_up+0x1f6) [ 136.293014] #func -218 task_wake_up_rt+0x9 (try_to_wake_up+0x1e5) [ 136.293014] #func -218 check_preempt_curr_rt+0x7 (check_preempt_curr+0x17) [ 136.293014] #func -219 check_preempt_curr+0x4 (try_to_wake_up+0x1c9) [ 136.293014] #func -219 update_rt_migration+0x4 (enqueue_task_rt+0x15c) [ 136.293014] #func -219 enqueue_task_rt+0x11 (enqueue_task+0x2d) [ 136.293014] #func -219 enqueue_task+0x9 (activate_task+0x2d) [ 136.293014] #func -219 activate_task+0x9 (try_to_wake_up+0x120) [ 136.293014] #func -219 select_task_rq_rt+0x9 (try_to_wake_up+0xcc) [ 136.293014] #func -220 update_rq_clock+0x9 (try_to_wake_up+0x8c) [ 136.293014] #func -220 _spin_lock+0x4 (task_rq_lock+0x6c) [ 136.293014] | #end 0x80000001 -220 ipipe_check_context+0xdb (task_rq_lock+0x29) [ 136.293014] | #begin 0x80000001 -220 ipipe_check_context+0x32 (task_rq_lock+0x29) [ 136.293014] #func -220 ipipe_check_context+0x11 (task_rq_lock+0x29) [ 136.293014] #func -221 task_rq_lock+0xb (try_to_wake_up+0x81) [ 136.293014] #func -221 try_to_wake_up+0x11 (wake_up_process+0x15) [ 136.293014] #func -221 wake_up_process+0x4 (lostage_handler+0xdd) [ 136.293014] | #end 0x80000001 -221 ipipe_trigger_irq+0x80 (__xnpod_schedule+0xa0) [ 136.293014] | #func -221 __ipipe_walk_pipeline+0x11 (__ipipe_dispatch_wired_nocheck+0x1d8) [ 136.293014] | #*func -222 ipipe_restore_pipeline_head+0x7 (T.622+0x24) [ 136.293014] | #*func -222 T.622+0x4 (__xnpod_schedule+0x69f) [ 136.293014] | #*func -222 xnsched_pick_next+0x4 (__xnpod_schedule+0x129) [ 136.293014] | #*func -222 T.623+0x4 (__xnpod_schedule+0xf0) [ 136.293014] | #*[ 350] gatekee -1 -222 __xnpod_schedule+0xd2 (xnpod_schedule+0x32) [ 136.524508] | #*func -223 ipipe_test_and_stall_pipeline_head+0x9 (T.625+0xe) [ 136.524508] | #*func -223 T.625+0x4 (__xnpod_schedule+0xaa) [ 136.524508] | #*func -223 __xnpod_schedule+0x11 (xnpod_schedule+0x32) [ 136.524508] | #*func -223 xnpod_schedule+0x4 (xnpod_schedule_handler+0x59) [ 136.524508] | #*func -223 xnpod_schedule_handler+0x7 (__ipipe_dispatch_wired_nocheck+0x127) [ 136.524508] | #func -224 __ipipe_dispatch_wired_nocheck+0x11 (__ipipe_dispatch_wired+0xc3) [ 136.524508] | #func -224 __ipipe_dispatch_wired+0xd (__ipipe_handle_irq+0x128) [ 136.524508] | #func -224 __ipipe_handle_irq+0x11 (ipipe_trigger_irq+0x71) [ 136.524508] | #begin 0x80000001 -224 ipipe_trigger_irq+0x52 (__xnpod_schedule+0xa0) [ 136.524508] #func -224 ipipe_trigger_irq+0x10 (__xnpod_schedule+0xa0) [ 136.524508] | #end 0x80000001 -224 __xnpod_schedule+0x8a (xnpod_schedule+0x32) [ 136.524508] | #begin 0x80000001 -225 __xnpod_schedule+0x3a (xnpod_schedule+0x32) [ 136.524508] #func -225 __xnpod_schedule+0x11 (xnpod_schedule+0x32) [ 136.524508] #func -225 xnpod_schedule+0x4 (lostage_handler+0xd5) [ 136.524508] | #end 0x80000000 -225 __ipipe_restore_pipeline_head+0xfa (T.513+0x7b) [ 136.524508] | *#func -225 __ipipe_restore_pipeline_head+0x7 (T.513+0x7b) [ 136.524508] | *#func -226 T.513+0x7 (xnsched_renice_root+0x5c) [ 136.524508] | *#[ 350] gatekee -1 -226 xnsched_renice_root+0x54 (lostage_handler+0xd0) [ 136.524508] | *#func -226 xnsched_track_policy+0x4 (xnsched_renice_root+0x3b) [ 136.524508] | #begin 0x80000000 -226 T.515+0x20 (xnsched_renice_root+0x25) [ 136.693014] #func -226 T.515+0x9 (xnsched_renice_root+0x25) [ 136.693014] #func -227 xnsched_renice_root+0xd (lostage_handler+0xd0) [ 136.693014] #func -227 lostage_handler+0x14 (rthal_apc_handler+0x8e) [ 136.693014] #func -227 rthal_apc_handler+0xb (__xirq_end+0x7d) [ 136.693014] | #end 0x80000001 -227 ipipe_check_context+0xdb (irq_enter+0x71) [ 136.693014] | #begin 0x80000001 -227 ipipe_check_context+0x32 (irq_enter+0x71) [ 136.693014] #func -228 ipipe_check_context+0x11 (irq_enter+0x71) [ 136.693014] #func -228 idle_cpu+0x4 (irq_enter+0x22) [ 136.693014] #func -228 rcu_irq_enter+0x4 (irq_enter+0x1b) [ 136.693014] #func -228 irq_enter+0x9 (__xirq_end+0x2e) [ 136.693014] | #end 0x80000000 -228 __ipipe_sync_stage+0x16a (__ipipe_walk_pipeline+0x215) [ 136.693014] | +func -229 __ipipe_sync_stage+0x11 (__ipipe_walk_pipeline+0x215) [ 136.693014] | +func -229 __ipipe_walk_pipeline+0x11 (__ipipe_dispatch_wired_nocheck+0x1d8) [ 136.693014] | # func -229 ipipe_restore_pipeline_head+0x7 (T.622+0x24) [ 136.693014] | # func -229 T.622+0x4 (__xnpod_schedule+0x69f) [ 136.693014] | # func -230 xnarch_save_fpu+0x4 (__xnpod_switch_fpu+0x44) [ 136.693014] | # func -230 __xnpod_switch_fpu+0x7 (__xnpod_schedule+0x635) [ 136.693014] | # [ 350] gatekee 99 -230 __xnpod_schedule+0x554 (xnpod_schedule+0x32) [ 136.693014] | # func -230 __unlazy_fpu+0x4 (__switch_to+0x17e) [ 136.693014] | # func -231 __switch_to+0xb (__xnpod_schedule+0x483) [ 136.693014] | # func -231 xnsched_pick_next+0x4 (__xnpod_schedule+0x129) [ 136.693014] | # func -231 T.623+0x4 (__xnpod_schedule+0xf0) [ 136.693014] | # [ 6309] trivial 99 -231 __xnpod_schedule+0xd2 (xnpod_schedule+0x32) [ 136.693014] | # func -232 ipipe_test_and_stall_pipeline_head+0x9 (T.625+0xe) [ 136.693014] | # func -232 T.625+0x4 (__xnpod_schedule+0xaa) [ 136.693014] | # func -232 __xnpod_schedule+0x11 (xnpod_schedule+0x32) [ 136.693014] | # func -232 xnpod_schedule+0x4 (xnpod_suspend_thread+0x173) [ 136.693014] | # func -232 ipipe_test_and_stall_pipeline_head+0x9 (T.625+0xe) [ 136.693014] | # func -232 T.625+0x4 (xnpod_suspend_thread+0x2b) [ 136.924508] | # func -233 xnpod_suspend_thread+0x11 (xnshadow_relax+0x7f) [ 136.924508] | # func -233 ipipe_restore_pipeline_head+0x7 (rthal_apc_schedule+0x5c) [ 136.924508] | # func -233 __ipipe_set_irq_pending+0x11 (rthal_apc_schedule+0x51) [ 136.924508] | # func -233 ipipe_test_and_stall_pipeline_head+0x9 (rthal_apc_schedule+0x1e) [ 136.924508] | # func -233 rthal_apc_schedule+0x7 (schedule_linux_call+0x76) [ 136.924508] | # func -234 ipipe_restore_pipeline_head+0x7 (schedule_linux_call+0x6b) [ 136.924508] | # func -234 ipipe_test_and_stall_pipeline_head+0x9 (schedule_linux_call+0x26) [ 136.924508] | # func -234 schedule_linux_call+0xb (xnshadow_relax+0x59) [ 136.924508] | + begin 0x80000000 -234 ipipe_test_and_stall_pipeline_head+0x20 (xnshadow_relax+0x41) [ 136.924508] + func -234 ipipe_test_and_stall_pipeline_head+0x9 (xnshadow_relax+0x41) [ 136.924508] | + end 0x80000000 -235 __ipipe_restore_pipeline_head+0xfa (T.513+0x7b) [ 136.924508] | # func -235 __ipipe_restore_pipeline_head+0x7 (T.513+0x7b) [ 136.924508] | # func -235 T.513+0x7 (xnsched_renice_root+0x5c) [ 136.924508] | # [ 350] gatekee 99 -235 xnsched_renice_root+0x54 (rpi_push+0xf6) [ 136.924508] | # func -235 xnsched_track_policy+0x4 (xnsched_renice_root+0x3b) [ 136.924508] | + begin 0x80000000 -236 T.515+0x20 (xnsched_renice_root+0x25) [ 136.924508] + func -236 T.515+0x9 (xnsched_renice_root+0x25) [ 136.924508] + func -236 xnsched_renice_root+0xd (rpi_push+0xf6) [ 136.924508] | + end 0x80000000 -236 __ipipe_restore_pipeline_head+0xfa (ipipe_restore_pipeline_head+0x66) [ 137.093014] | # func -236 __ipipe_restore_pipeline_head+0x7 (ipipe_restore_pipeline_head+0x66) [ 137.093014] | # func -236 ipipe_restore_pipeline_head+0x7 (xnlock_put_irqrestore+0x23) [ 137.093014] | # func -237 xnlock_put_irqrestore+0x4 (rpi_push+0xc9) [ 137.093014] | # func -237 __xnlock_get+0x4 (__xnlock_get_irqsave+0x23) [ 137.093014] | + begin 0x80000000 -237 ipipe_test_and_stall_pipeline_head+0x20 (__xnlock_get_irqsave+0x17) [ 137.093014] + func -237 ipipe_test_and_stall_pipeline_head+0x9 (__xnlock_get_irqsave+0x17) [ 137.093014] + func -237 __xnlock_get_irqsave+0x9 (rpi_push+0x49) [ 137.093014] + func -238 rpi_push+0x11 (xnshadow_relax+0x3c) [ 137.093014] + func -238 xnshadow_relax+0xd (hisyscall_event+0x230) [ 137.093014] + func -238 hisyscall_event+0x11 (__ipipe_dispatch_event+0x1b6) [ 137.093014] | + end 0x80000001 -238 __ipipe_dispatch_event+0x1a4 (__ipipe_syscall_root+0x4f) [ 137.093014] | + begin 0x80000001 -238 __ipipe_dispatch_event+0x34 (__ipipe_syscall_root+0x4f) [ 137.093014] + func -238 __ipipe_dispatch_event+0x11 (__ipipe_syscall_root+0x4f) [ 137.093014] + func -239 __ipipe_event_monitored_p+0xb (__ipipe_syscall_root+0x3a) [ 137.093014] + func -239 __ipipe_syscall_root+0xb (__ipipe_syscall_root_thunk+0x35) [ 137.093014] | + begin 0x80000000 -239 __ipipe_syscall_root+0xe1 (__ipipe_syscall_root_thunk+0x35) [ 137.093014] | + end 0x80000001 -240 __ipipe_syscall_root+0xbb (__ipipe_syscall_root_thunk+0x35) [ 137.093014] | + begin 0x80000001 -240 __ipipe_syscall_root+0x6b (__ipipe_syscall_root_thunk+0x35) [ 137.093014] | + end 0x80000001 -240 __ipipe_dispatch_event+0x4b0 (__ipipe_syscall_root+0x4f) [ 137.093014] | + begin 0x80000001 -240 __ipipe_dispatch_event+0x1da (__ipipe_syscall_root+0x4f) [ 137.093014] | + end 0x80000000 -241 __ipipe_restore_pipeline_head+0xfa (ipipe_restore_pipeline_head+0x66) [ 137.093014] | # func -241 __ipipe_restore_pipeline_head+0x7 (ipipe_restore_pipeline_head+0x66) [ 137.093014] | # func -241 ipipe_restore_pipeline_head+0x7 (xnlock_put_irqrestore+0x23) [ 137.093014] | # func -241 xnlock_put_irqrestore+0x4 (xnshadow_harden+0x1a4) [ 137.093014] | # func -241 xnarch_save_fpu+0x4 (__xnpod_switch_fpu+0x44) [ 137.093014] | # func -241 __xnpod_switch_fpu+0x7 (xnpod_switch_fpu+0xe) [ 137.324508] | # func -242 xnpod_switch_fpu+0x4 (xnshadow_harden+0x187) [ 137.324508] | # func -242 __unlazy_fpu+0x4 (__switch_to+0x17e) [ 137.324508] | # func -242 __switch_to+0xb (thread_return+0x0) [ 137.324508] | # func -243 xnsched_pick_next+0x4 (__xnpod_schedule+0x129) [ 137.324508] | # func -243 T.623+0x4 (__xnpod_schedule+0xf0) [ 137.324508] | # [ 350] gatekee -1 -243 __xnpod_schedule+0xd2 (xnpod_schedule+0x32) [ 137.324508] | # func -243 ipipe_test_and_stall_pipeline_head+0x9 (T.625+0xe) [ 137.324508] | # func -243 T.625+0x4 (__xnpod_schedule+0xaa) [ 137.324508] | # func -244 __xnpod_schedule+0x11 (xnpod_schedule+0x32) [ 137.324508] | # func -244 xnpod_schedule+0x4 (xnpod_schedule_handler+0x59) [ 137.324508] | # func -244 xnpod_schedule_handler+0x7 (__ipipe_dispatch_wired_nocheck+0x127) [ 137.324508] | +func -244 __ipipe_dispatch_wired_nocheck+0x11 (__ipipe_dispatch_wired+0xc3) [ 137.324508] | +func -245 __ipipe_dispatch_wired+0xd (__ipipe_handle_irq+0x128) [ 137.324508] | +func -245 __ipipe_handle_irq+0x11 (ipipe_trigger_irq+0x71) [ 137.324508] | +begin 0x80000001 -245 ipipe_trigger_irq+0x52 (__xnpod_schedule+0xa0) [ 137.324508] +func -245 ipipe_trigger_irq+0x10 (__xnpod_schedule+0xa0) [ 137.324508] | +end 0x80000001 -245 __xnpod_schedule+0x8a (xnpod_schedule+0x32) [ 137.324508] | +begin 0x80000001 -246 __xnpod_schedule+0x3a (xnpod_schedule+0x32) [ 137.324508] +func -246 __xnpod_schedule+0x11 (xnpod_schedule+0x32) [ 137.324508] +func -246 xnpod_schedule+0x4 (gatekeeper_thread+0x179) [ 137.496549] ---[ end trace 9d22ced1f219c8f9 ]--- [ 137.501180] ata2: EH complete ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [Xenomai-help] Freeze on SMP x86-64 2009-10-06 15:45 ` Roman Pisl @ 2009-10-06 15:59 ` Jan Kiszka 0 siblings, 0 replies; 19+ messages in thread From: Jan Kiszka @ 2009-10-06 15:59 UTC (permalink / raw) To: Roman Pisl; +Cc: xenomai@xenomai.org Roman Pisl wrote: > On 6.10.2009 15:56, Jan Kiszka wrote: >> Roman Pisl wrote: >>> ... >>>> Is there a chance to grab the panic log via serial line? The first of >>>> your two screenshots indicate that there might have happened something >>>> interesting before the NMI triggered, but it's scrolled out of sight. >>>> >>>> Jan >>>> >>> Hello, >>> here I send kernel panic (triggered by rt_task_sleep and latency test) >>> grabbed via serial line. >> Hmm, still only NMI alarms... >> >>> I'm ready to help with resolving this issue. >> Could you try enabling the I-pipe tracer with function tracing? It >> should dump a trace of the functions that were executed before the >> watchdog triggered. You may need to extend the number of tracepoints a >> bit, try "echo 1000> /proc/ipipe/trace/back_trace_points". >> >> Jan >> > > Then I had I/O activity on the background and got this. > Try without CONFIG_IPIPE_DEBUG_INTERNAL (it triggers when we printk from NMI context). Please also raise the NMI threshold (CONFIG_XENO_HW_NMI_DEBUG_LATENCY_MAX) to 1 ms or so. It may otherwise trigger too early if there are hardware related delays + the tracing overhead. Jan -- Siemens AG, Corporate Technology, CT SE 2 Corporate Competence Center Embedded Linux ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [Xenomai-help] Freeze on SMP x86-64 2009-10-02 11:48 [Xenomai-help] Freeze on SMP x86-64 Roman Pisl 2009-10-02 12:39 ` Gilles Chanteperdrix @ 2009-10-02 12:45 ` Peter Soetens 2009-10-02 12:58 ` Roman Pisl 2009-10-02 13:40 ` Philippe Gerum 2009-10-02 14:21 ` Jan Kiszka 3 siblings, 1 reply; 19+ messages in thread From: Peter Soetens @ 2009-10-02 12:45 UTC (permalink / raw) To: Roman Pisl; +Cc: xenomai On Fri, Oct 2, 2009 at 13:48, Roman Pisl <rpisl@domain.hid> wrote: > Hello, > I just tried x86-64 SMP Linux/Xenomai on my workstation (Intel Core2 > Quad) but it freezes immediately after latency test or clocktest is > started. It freezes even during the boot, when Xenomai debbuging is > enabled. Xenomai/adeos version ? Peter ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [Xenomai-help] Freeze on SMP x86-64 2009-10-02 12:45 ` Peter Soetens @ 2009-10-02 12:58 ` Roman Pisl 0 siblings, 0 replies; 19+ messages in thread From: Roman Pisl @ 2009-10-02 12:58 UTC (permalink / raw) To: Peter Soetens; +Cc: xenomai On 2.10.2009 14:45, Peter Soetens wrote: > On Fri, Oct 2, 2009 at 13:48, Roman Pisl<rpisl@domain.hid> wrote: >> Hello, >> I just tried x86-64 SMP Linux/Xenomai on my workstation (Intel Core2 >> Quad) but it freezes immediately after latency test or clocktest is >> started. It freezes even during the boot, when Xenomai debbuging is >> enabled. > > Xenomai/adeos version ? > > Peter I tried git xenomai-head with Linux 2.6.31, 2.4.9.1 and Xenomai 2.5-rc3 with Linux 2.6.28 and 2.6.30 with latest adeos patch. It is always the same, x86-64 freezes. Roman ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [Xenomai-help] Freeze on SMP x86-64 2009-10-02 11:48 [Xenomai-help] Freeze on SMP x86-64 Roman Pisl 2009-10-02 12:39 ` Gilles Chanteperdrix 2009-10-02 12:45 ` Peter Soetens @ 2009-10-02 13:40 ` Philippe Gerum 2009-10-02 14:14 ` Roman Pisl 2009-10-02 14:21 ` Jan Kiszka 3 siblings, 1 reply; 19+ messages in thread From: Philippe Gerum @ 2009-10-02 13:40 UTC (permalink / raw) To: Roman Pisl; +Cc: xenomai On Fri, 2009-10-02 at 13:48 +0200, Roman Pisl wrote: > Hello, > I just tried x86-64 SMP Linux/Xenomai on my workstation (Intel Core2 > Quad) but it freezes immediately after latency test or clocktest is > started. It freezes even during the boot, when Xenomai debbuging is > enabled. > > The same kernel binary runs seamlessly in KVM on the same machine. > > When I completely disable ACPI, the kernel recognizes only one CPU and > the latency test works. > > The same configuration but for 32bit x86 also runs without freeze. > > Do you have any ideas? > Try disabling PM_TIMER. > Roman > > > _______________________________________________ > Xenomai-help mailing list > Xenomai-help@domain.hid > https://mail.gna.org/listinfo/xenomai-help -- Philippe. ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [Xenomai-help] Freeze on SMP x86-64 2009-10-02 13:40 ` Philippe Gerum @ 2009-10-02 14:14 ` Roman Pisl 2009-10-02 16:40 ` Gilles Chanteperdrix 0 siblings, 1 reply; 19+ messages in thread From: Roman Pisl @ 2009-10-02 14:14 UTC (permalink / raw) To: Philippe Gerum; +Cc: xenomai On 2.10.2009 15:40, Philippe Gerum wrote: > On Fri, 2009-10-02 at 13:48 +0200, Roman Pisl wrote: >> Hello, >> I just tried x86-64 SMP Linux/Xenomai on my workstation (Intel Core2 >> Quad) but it freezes immediately after latency test or clocktest is >> started. It freezes even during the boot, when Xenomai debbuging is >> enabled. >> >> The same kernel binary runs seamlessly in KVM on the same machine. >> >> When I completely disable ACPI, the kernel recognizes only one CPU and >> the latency test works. >> >> The same configuration but for 32bit x86 also runs without freeze. >> >> Do you have any ideas? >> > > Try disabling PM_TIMER. > Do you mean CONFIG_X86_PM_TIMER? PM/ACPI probably requires this and as I described before - without ACPI Linux brings up only one CPU, the latency test works and doesn't freeze the machine. ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [Xenomai-help] Freeze on SMP x86-64 2009-10-02 14:14 ` Roman Pisl @ 2009-10-02 16:40 ` Gilles Chanteperdrix 0 siblings, 0 replies; 19+ messages in thread From: Gilles Chanteperdrix @ 2009-10-02 16:40 UTC (permalink / raw) To: Roman Pisl; +Cc: xenomai Roman Pisl wrote: > On 2.10.2009 15:40, Philippe Gerum wrote: >> On Fri, 2009-10-02 at 13:48 +0200, Roman Pisl wrote: >>> Hello, >>> I just tried x86-64 SMP Linux/Xenomai on my workstation (Intel Core2 >>> Quad) but it freezes immediately after latency test or clocktest is >>> started. It freezes even during the boot, when Xenomai debbuging is >>> enabled. >>> >>> The same kernel binary runs seamlessly in KVM on the same machine. >>> >>> When I completely disable ACPI, the kernel recognizes only one CPU and >>> the latency test works. >>> >>> The same configuration but for 32bit x86 also runs without freeze. >>> >>> Do you have any ideas? >>> >> Try disabling PM_TIMER. >> > > Do you mean CONFIG_X86_PM_TIMER? PM/ACPI probably requires this and as I > described before - without ACPI Linux brings up only one CPU, the > latency test works and doesn't freeze the machine. No, PM does not require this. The only reason why PM_TIMER is called a PM_TIMER is that it is a timer which continues to run independently on the modes of the processor. The x86 local timers stop when the processor is idle on some mahcines, this does not happen with the PM timer. -- Gilles. ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [Xenomai-help] Freeze on SMP x86-64 2009-10-02 11:48 [Xenomai-help] Freeze on SMP x86-64 Roman Pisl ` (2 preceding siblings ...) 2009-10-02 13:40 ` Philippe Gerum @ 2009-10-02 14:21 ` Jan Kiszka 3 siblings, 0 replies; 19+ messages in thread From: Jan Kiszka @ 2009-10-02 14:21 UTC (permalink / raw) To: Roman Pisl; +Cc: xenomai Roman Pisl wrote: > Hello, > I just tried x86-64 SMP Linux/Xenomai on my workstation (Intel Core2 > Quad) but it freezes immediately after latency test or clocktest is > started. It freezes even during the boot, when Xenomai debbuging is > enabled. > > The same kernel binary runs seamlessly in KVM on the same machine. Did you run kvm (qemu) with -smp 2 (or even 4)? > > When I completely disable ACPI, the kernel recognizes only one CPU and > the latency test works. > > The same configuration but for 32bit x86 also runs without freeze. > > Do you have any ideas? You could try playing with the NMI watchdog support (enable related Xenomai feature, pass nmi_watchdog=2 as kernel option). That may be able to generate some backtrace after the box is bricked - maybe... Jan -- Siemens AG, Corporate Technology, CT SE 2 Corporate Competence Center Embedded Linux ^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2009-10-06 15:59 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-10-02 11:48 [Xenomai-help] Freeze on SMP x86-64 Roman Pisl
2009-10-02 12:39 ` Gilles Chanteperdrix
2009-10-02 13:22 ` Roman Pisl
2009-10-02 13:25 ` Gilles Chanteperdrix
2009-10-02 13:34 ` Philippe Gerum
2009-10-02 13:36 ` Philippe Gerum
2009-10-03 16:01 ` Jan Kiszka
[not found] ` <4AC9E655.5090006@domain.hid>
[not found] ` <4AC9ED6B.4050004@domain.hid>
[not found] ` <4AC9F4FA.5070409@domain.hid>
[not found] ` <4ACA013F.8040602@domain.hid>
2009-10-06 13:18 ` Roman Pisl
2009-10-06 13:56 ` Jan Kiszka
2009-10-06 14:50 ` Roman Pisl
2009-10-06 15:33 ` Roman Pisl
2009-10-06 15:45 ` Roman Pisl
2009-10-06 15:59 ` Jan Kiszka
2009-10-02 12:45 ` Peter Soetens
2009-10-02 12:58 ` Roman Pisl
2009-10-02 13:40 ` Philippe Gerum
2009-10-02 14:14 ` Roman Pisl
2009-10-02 16:40 ` Gilles Chanteperdrix
2009-10-02 14:21 ` Jan Kiszka
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.