Re: tg3: link is permanently down after ifdown and ifup

[Felix Radensky <felix@embedded-sol.com>]

Hi, Matt

Matt Carlson wrote:
> On Wed, Dec 09, 2009 at 05:45:36PM -0800, Felix Radensky wrote:
>   
>> Hi, Matt
>>
>> Matt Carlson wrote:
>>     
>>> I understand the problem now.  The problem is that tg3_set_power_state()
>>> puts the phy into a low-power mode when it releases the device.  When
>>> the phy is reacquired, a phy reset is missing to take the device back
>>> out of the low-power mode.
>>>
>>> The patch at the bottom of this email is the fix I'm currently testing.
>>> If you wish, you can try it out.
>>>
>>>   
>>>       
>> Thanks a lot for the fix, I'll ask the guys with access to hardware to 
>> test it.
>>
>> The problem with lost link happened to me when link was synchronized
>> at 1000Mbit/sec. At 100Mbit/sec, ifdown would result in the following
>> soft lockup:
>>
>> BUG: soft lockup - CPU#0 stuck for 61s! [events/0:5]
>> Modules linked in: ehci_hcd usbcore
>> NIP: c0191f0c LR: c018774c CTR: c0191f04
>> REGS: ef83fe60 TRAP: 0901 Not tainted (2.6.31)
>> MSR: 00029000 <EE,ME,CE> CR: 24022084 XER: 00000000
>> TASK = ef8312c0[5] 'events/0' THREAD: ef83e000
>> GPR00: f1040000 ef83ff10 ef8312c0 ef8292c0 00000400 00c04808 00000000 
>> 00000000
>> GPR08: 00000000 00000000 00000006 00c04800 44024084
>> NIP [c0191f0c] tg3_read32+0x8/0x18
>> LR [c018774c] _tw32_flush+0x94/0xa4
>> Call Trace:
>> [ef83ff10] [ef8314b8] 0xef8314b8 (unreliable)
>> [ef83ff30] [c0192074] tg3_adjust_link+0x98/0x24c
>> [ef83ff50] [c017eab0] phy_state_machine+0xd4/0x5b8
>> [ef83ff70] [c0037570] worker_thread+0x124/0x1b8
>> [ef83ffc0] [c003b5fc] kthread+0x78/0x7c
>> [ef83fff0] [c000f584] kernel_thread+0x4c/0x68
>>
>> Can you reproduce this ?
>>
>> Thanks a lot for your help.
>>     
>
> Is this with the "Fix phylib locking strategy" patch in place?
>
>   
Yes, this is with tg3.c and broadcom.c from 2.6.32. The hang occurs on 
read from EMAC Mode register.

Felix.