[PATCH net-next v2 0/3] can: mscan-mpc5xxx: add support for the Freescale MPC512x

[PATCH net-next v2 0/3] can: mscan-mpc5xxx: add support for the Freescale MPC512x

[Wolfgang Grandegger]

This patch series adds support for the MPC512x from Freescale to
the mpc5xxx_can MSCAN driver.

Changes since v1:

- Various coding style issues, printk formats, variable names and
  error messagaes and typos fixes or improved

- MPC5xxx specific data are now passed to mpc5xxx_can_probe() via
  "of_device_id->data".

- The index of the MPC512x CAN controller is now derived directly
  from reg property. This allows use of_iomap() as usual.

- It has been documented that MPC512x Rev.1 CPUs are not supported.

Wolfgang

Wolfgang Grandegger (3):
  can: mscan: fix improper return if dlc < 8 in start_xmit function
  can: mscan-mpc5xxx: add support for the MPC512x processor
  powerpc/mpc5xxx: add OF platform binding doc for FSL MSCAN devices

 Documentation/powerpc/dts-bindings/fsl/can.txt     |   53 ++++
 Documentation/powerpc/dts-bindings/fsl/mpc5200.txt |    9 +-
 drivers/net/can/mscan/Kconfig                      |    7 +-
 drivers/net/can/mscan/mpc5xxx_can.c                |  258 ++++++++++++++++----
 drivers/net/can/mscan/mscan.c                      |   51 +++-
 drivers/net/can/mscan/mscan.h                      |   83 ++++---
 6 files changed, 357 insertions(+), 104 deletions(-)
 create mode 100644 Documentation/powerpc/dts-bindings/fsl/can.txt

[PATCH net-next v2 0/3] can: mscan-mpc5xxx: add support for the Freescale MPC512x

[Wolfgang Grandegger]

This patch series adds support for the MPC512x from Freescale to
the mpc5xxx_can MSCAN driver.

Changes since v1:

- Various coding style issues, printk formats, variable names and
  error messagaes and typos fixes or improved

- MPC5xxx specific data are now passed to mpc5xxx_can_probe() via
  "of_device_id->data".

- The index of the MPC512x CAN controller is now derived directly
  from reg property. This allows use of_iomap() as usual.

- It has been documented that MPC512x Rev.1 CPUs are not supported.

Wolfgang

Wolfgang Grandegger (3):
  can: mscan: fix improper return if dlc < 8 in start_xmit function
  can: mscan-mpc5xxx: add support for the MPC512x processor
  powerpc/mpc5xxx: add OF platform binding doc for FSL MSCAN devices

 Documentation/powerpc/dts-bindings/fsl/can.txt     |   53 ++++
 Documentation/powerpc/dts-bindings/fsl/mpc5200.txt |    9 +-
 drivers/net/can/mscan/Kconfig                      |    7 +-
 drivers/net/can/mscan/mpc5xxx_can.c                |  258 ++++++++++++++++----
 drivers/net/can/mscan/mscan.c                      |   51 +++-
 drivers/net/can/mscan/mscan.h                      |   83 ++++---
 6 files changed, 357 insertions(+), 104 deletions(-)
 create mode 100644 Documentation/powerpc/dts-bindings/fsl/can.txt

[PATCH net-next v2 1/3] can: mscan: fix improper return if dlc < 8 in start_xmit function

[Wolfgang Grandegger]

From: Wolfgang Grandegger <wg@denx.de>

The start_xmit function of the MSCAN Driver did return improperly if
the CAN dlc check failed (skb not freed and invalid return code). This
patch adds a proper check of the frame lenght and data size and returns
now correctly. Furthermore, a typo has been fixed.

Signed-off-by: Wolfgang Grandegger <wg@denx.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
---
 drivers/net/can/mscan/mscan.c |   11 ++++++++---
 1 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index bb06dfb..7df950e 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -4,7 +4,7 @@
  * Copyright (C) 2005-2006 Andrey Volkov <avolkov@varma-el.com>,
  *                         Varma Electronics Oy
  * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
- * Copytight (C) 2008-2009 Pengutronix <kernel@pengutronix.de>
+ * Copyright (C) 2008-2009 Pengutronix <kernel@pengutronix.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the version 2 of the GNU General Public License
@@ -177,8 +177,13 @@ static netdev_tx_t mscan_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	int i, rtr, buf_id;
 	u32 can_id;
 
-	if (frame->can_dlc > 8)
-		return -EINVAL;
+	if (skb->len != sizeof(*frame) || frame->can_dlc > 8) {
+		dev_err(dev->dev.parent,
+			"Dropping non-conform packet: len %u, can_dlc %u\n",
+			skb->len, frame->can_dlc);
+		kfree_skb(skb);
+		return  NETDEV_TX_OK;
+	}
 
 	out_8(&regs->cantier, 0);
 
-- 
1.6.2.5

[PATCH net-next v2 1/3] can: mscan: fix improper return if dlc < 8 in start_xmit function

[Wolfgang Grandegger]

From: Wolfgang Grandegger <wg-ynQEQJNshbs@public.gmane.org>

The start_xmit function of the MSCAN Driver did return improperly if
the CAN dlc check failed (skb not freed and invalid return code). This
patch adds a proper check of the frame lenght and data size and returns
now correctly. Furthermore, a typo has been fixed.

Signed-off-by: Wolfgang Grandegger <wg-ynQEQJNshbs@public.gmane.org>
Acked-by: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/net/can/mscan/mscan.c |   11 ++++++++---
 1 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index bb06dfb..7df950e 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -4,7 +4,7 @@
  * Copyright (C) 2005-2006 Andrey Volkov <avolkov-ppI4tVfbJvJWk0Htik3J/w@public.gmane.org>,
  *                         Varma Electronics Oy
  * Copyright (C) 2008-2009 Wolfgang Grandegger <wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
- * Copytight (C) 2008-2009 Pengutronix <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
+ * Copyright (C) 2008-2009 Pengutronix <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the version 2 of the GNU General Public License
@@ -177,8 +177,13 @@ static netdev_tx_t mscan_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	int i, rtr, buf_id;
 	u32 can_id;
 
-	if (frame->can_dlc > 8)
-		return -EINVAL;
+	if (skb->len != sizeof(*frame) || frame->can_dlc > 8) {
+		dev_err(dev->dev.parent,
+			"Dropping non-conform packet: len %u, can_dlc %u\n",
+			skb->len, frame->can_dlc);
+		kfree_skb(skb);
+		return  NETDEV_TX_OK;
+	}
 
 	out_8(&regs->cantier, 0);
 
-- 
1.6.2.5

[PATCH net-next v2 2/3] can: mscan-mpc5xxx: add support for the MPC512x processor

[Wolfgang Grandegger]

From: Wolfgang Grandegger <wg@denx.de>

The main differences compared to the MSCAN on the MPC5200 are:

- More flexibility in choosing the CAN source clock and frequency:

  Three different clock sources can be selected: "ip", "ref" or "sys".
  For the latter two, a clock divider can be defined as well. If the
  clock source is not specified by the device tree, we first try to
  find an optimal CAN source clock based on the system clock. If that
  is not possible, the reference clock will be used.

- The behavior of bus-off recovery is configurable:

  To comply with the usual handling of Socket-CAN bus-off recovery,
  "recovery on request" is selected (instead of automatic recovery).

Note that only MPC5121 Rev. 2 and later is supported.

Signed-off-by: Wolfgang Grandegger <wg@denx.de>
---
 drivers/net/can/mscan/Kconfig       |    7 +-
 drivers/net/can/mscan/mpc5xxx_can.c |  258 +++++++++++++++++++++++++++++------
 drivers/net/can/mscan/mscan.c       |   40 +++++-
 drivers/net/can/mscan/mscan.h       |   83 ++++++------
 4 files changed, 295 insertions(+), 93 deletions(-)

diff --git a/drivers/net/can/mscan/Kconfig b/drivers/net/can/mscan/Kconfig
index cd0f2d6..27d1d39 100644
--- a/drivers/net/can/mscan/Kconfig
+++ b/drivers/net/can/mscan/Kconfig
@@ -11,12 +11,13 @@ if CAN_MSCAN
 
 config CAN_MPC5XXX
 	tristate "Freescale MPC5xxx onboard CAN controller"
-	depends on PPC_MPC52xx
+	depends on (PPC_MPC52xx || PPC_MPC512x)
 	---help---
 	  If you say yes here you get support for Freescale's MPC5xxx
-	  onboard CAN controller.
+	  onboard CAN controller. Currently, the MPC5200, MPC5200B and
+	  MPC5121 (Rev. 2 and later) are supported.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called mscan-mpc5xxx.ko.
 
 endif
diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c
index 1de6f63..022e8be 100644
--- a/drivers/net/can/mscan/mpc5xxx_can.c
+++ b/drivers/net/can/mscan/mpc5xxx_can.c
@@ -29,6 +29,7 @@
 #include <linux/can/dev.h>
 #include <linux/of_platform.h>
 #include <sysdev/fsl_soc.h>
+#include <linux/clk.h>
 #include <linux/io.h>
 #include <asm/mpc52xx.h>
 
@@ -36,22 +37,21 @@
 
 #define DRV_NAME "mpc5xxx_can"
 
-static struct of_device_id mpc52xx_cdm_ids[] __devinitdata = {
+struct mpc5xxx_can_data {
+	unsigned int type;
+	u32 (*get_clock)(struct of_device *ofdev, const char *clock_name,
+			 int *mscan_clksrc);
+};
+
+#ifdef CONFIG_PPC_MPC5200
+static struct of_device_id __devinitdata mpc52xx_cdm_ids[] = {
 	{ .compatible = "fsl,mpc5200-cdm", },
 	{}
 };
 
-/*
- * Get frequency of the MSCAN clock source
- *
- * Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock (IP_CLK)
- * can be selected. According to the MPC5200 user's manual, the oscillator
- * clock is the better choice as it has less jitter but due to a hardware
- * bug, it can not be selected for the old MPC5200 Rev. A chips.
- */
-
-static unsigned int  __devinit mpc52xx_can_clock_freq(struct of_device *of,
-						      int clock_src)
+static u32 __devinit mpc52xx_can_get_clock(struct of_device *ofdev,
+					   const char *clock_name,
+					   int *mscan_clksrc)
 {
 	unsigned int pvr;
 	struct mpc52xx_cdm  __iomem *cdm;
@@ -61,11 +61,24 @@ static unsigned int  __devinit mpc52xx_can_clock_freq(struct of_device *of,
 
 	pvr = mfspr(SPRN_PVR);
 
-	freq = mpc5xxx_get_bus_frequency(of->node);
+	/*
+	 * Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock
+	 * (IP_CLK) can be selected as MSCAN clock source. According to
+	 * the MPC5200 user's manual, the oscillator clock is the better
+	 * choice as it has less jitter. For this reason, it is selected
+	 * by default. Unfortunately, it can not be selected for the old
+	 * MPC5200 Rev. A chips due to a hardware bug (check errata).
+	 */
+	if (clock_name && strcmp(clock_name, "ip") == 0)
+		*mscan_clksrc = MSCAN_CLKSRC_BUS;
+	else
+		*mscan_clksrc = MSCAN_CLKSRC_XTAL;
+
+	freq = mpc5xxx_get_bus_frequency(ofdev->node);
 	if (!freq)
 		return 0;
 
-	if (clock_src == MSCAN_CLKSRC_BUS || pvr == 0x80822011)
+	if (*mscan_clksrc == MSCAN_CLKSRC_BUS || pvr == 0x80822011)
 		return freq;
 
 	/* Determine SYS_XTAL_IN frequency from the clock domain settings */
@@ -75,7 +88,6 @@ static unsigned int  __devinit mpc52xx_can_clock_freq(struct of_device *of,
 		return 0;
 	}
 	cdm = of_iomap(np_cdm, 0);
-	of_node_put(np_cdm);
 
 	if (in_8(&cdm->ipb_clk_sel) & 0x1)
 		freq *= 2;
@@ -84,26 +96,184 @@ static unsigned int  __devinit mpc52xx_can_clock_freq(struct of_device *of,
 	freq *= (val & (1 << 5)) ? 8 : 4;
 	freq /= (val & (1 << 6)) ? 12 : 16;
 
+	of_node_put(np_cdm);
 	iounmap(cdm);
 
 	return freq;
 }
+#else /* !CONFIG_PPC_MPC5200 */
+static u32 __devinit mpc52xx_can_get_clock(struct of_device *ofdev,
+					   const char *clock_name,
+					   int *mscan_clksrc)
+{
+	return 0;
+}
+#endif /* CONFIG_PPC_MPC5200 */
+
+#ifdef CONFIG_PPC_MPC512x
+struct mpc512x_clockctl {
+	u32 spmr;		/* System PLL Mode Reg */
+	u32 sccr[2];		/* System Clk Ctrl Reg 1 & 2 */
+	u32 scfr1;		/* System Clk Freq Reg 1 */
+	u32 scfr2;		/* System Clk Freq Reg 2 */
+	u32 reserved;
+	u32 bcr;		/* Bread Crumb Reg */
+	u32 pccr[12];		/* PSC Clk Ctrl Reg 0-11 */
+	u32 spccr;		/* SPDIF Clk Ctrl Reg */
+	u32 cccr;		/* CFM Clk Ctrl Reg */
+	u32 dccr;		/* DIU Clk Cnfg Reg */
+	u32 mccr[4];		/* MSCAN Clk Ctrl Reg 1-3 */
+};
+
+static struct of_device_id __devinitdata mpc512x_clock_ids[] = {
+	{ .compatible = "fsl,mpc5121-clock", },
+	{}
+};
+
+static u32 __devinit mpc512x_can_get_clock(struct of_device *ofdev,
+					   const char *clock_name,
+					   int *mscan_clksrc)
+{
+	struct mpc512x_clockctl __iomem *clockctl;
+	struct device_node *np_clock;
+	struct clk *sys_clk, *ref_clk;
+	int plen, clockidx, clocksrc = -1;
+	u32 sys_freq, val, clockdiv = 1, freq = 0;
+	const u32 *pval;
+
+	np_clock = of_find_matching_node(NULL, mpc512x_clock_ids);
+	if (!np_clock) {
+		dev_err(&ofdev->dev, "couldn't find clock node\n");
+		return -ENODEV;
+	}
+	clockctl = of_iomap(np_clock, 0);
+	if (!clockctl) {
+		dev_err(&ofdev->dev, "couldn't map clock registers\n");
+		return 0;
+	}
+
+	/* Determine the MSCAN device index from the physical address */
+	pval = of_get_property(ofdev->node, "reg", &plen);
+	BUG_ON(!pval || plen < sizeof(*pval));
+	clockidx = (*pval & 0x80) ? 1 : 0;
+	if (*pval & 0x2000)
+		clockidx += 2;
+
+	/*
+	 * Clock source and divider selection: 3 different clock sources
+	 * can be selected: "ip", "ref" or "sys". For the latter two, a
+	 * clock divider can be defined as well. If the clock source is
+	 * not specified by the device tree, we first try to find an
+	 * optimal CAN source clock based on the system clock. If that
+	 * is not posslible, the reference clock will be used.
+	 */
+	if (clock_name && !strcmp(clock_name, "ip")) {
+		*mscan_clksrc = MSCAN_CLKSRC_IPS;
+		freq = mpc5xxx_get_bus_frequency(ofdev->node);
+	} else {
+		*mscan_clksrc = MSCAN_CLKSRC_BUS;
+
+		pval = of_get_property(ofdev->node,
+				       "fsl,mscan-clock-divider", &plen);
+		if (pval && plen == sizeof(*pval))
+			clockdiv = *pval;
+		if (!clockdiv)
+			clockdiv = 1;
+
+		if (!clock_name || !strcmp(clock_name, "sys")) {
+			sys_clk = clk_get(&ofdev->dev, "sys_clk");
+			if (!sys_clk) {
+				dev_err(&ofdev->dev, "couldn't get sys_clk\n");
+				goto exit_unmap;
+			}
+			/* Get and round up/down sys clock rate */
+			sys_freq = 1000000 *
+				((clk_get_rate(sys_clk) + 499999) / 1000000);
+
+			if (!clock_name) {
+				/* A multiple of 16 MHz would be optimal */
+				if ((sys_freq % 16000000) == 0) {
+					clocksrc = 0;
+					clockdiv = sys_freq / 16000000;
+					freq = sys_freq / clockdiv;
+				}
+			} else {
+				clocksrc = 0;
+				freq = sys_freq / clockdiv;
+			}
+		}
+
+		if (clocksrc < 0) {
+			ref_clk = clk_get(&ofdev->dev, "ref_clk");
+			if (!ref_clk) {
+				dev_err(&ofdev->dev, "couldn't get ref_clk\n");
+				goto exit_unmap;
+			}
+			clocksrc = 1;
+			freq = clk_get_rate(ref_clk) / clockdiv;
+		}
+	}
+
+	/* Disable clock */
+	out_be32(&clockctl->mccr[clockidx], 0x0);
+	if (clocksrc >= 0) {
+		/* Set source and divider */
+		val = (clocksrc << 14) | ((clockdiv - 1) << 17);
+		out_be32(&clockctl->mccr[clockidx], val);
+		/* Enable clock */
+		out_be32(&clockctl->mccr[clockidx], val | 0x10000);
+	}
+
+	/* Enable MSCAN clock domain */
+	val = in_be32(&clockctl->sccr[1]);
+	if (!(val & (1 << 25)))
+		out_be32(&clockctl->sccr[1], val | (1 << 25));
+
+	dev_dbg(&ofdev->dev, "using '%s' with frequency divider %d\n",
+		*mscan_clksrc == MSCAN_CLKSRC_IPS ? "ips_clk" :
+		clocksrc == 1 ? "ref_clk" : "sys_clk", clockdiv);
+
+exit_unmap:
+	of_node_put(np_clock);
+	iounmap(clockctl);
+
+	return freq;
+}
+#else /* !CONFIG_PPC_MPC512x */
+static u32 __devinit mpc512x_can_get_clock(struct of_device *ofdev,
+					   const char *clock_name,
+					   int *mscan_clksrc)
+{
+	return 0;
+}
+#endif /* CONFIG_PPC_MPC512x */
+
+static struct mpc5xxx_can_data __devinitdata mpc5200_can_data = {
+	.type = MSCAN_TYPE_MPC5200,
+	.get_clock = mpc52xx_can_get_clock,
+};
+
+static struct mpc5xxx_can_data __devinitdata mpc5121_can_data = {
+	.type = MSCAN_TYPE_MPC5121,
+	.get_clock = mpc512x_can_get_clock,
+};
 
 static int __devinit mpc5xxx_can_probe(struct of_device *ofdev,
 				       const struct of_device_id *id)
 {
+	struct mpc5xxx_can_data *data = (struct mpc5xxx_can_data *)id->data;
 	struct device_node *np = ofdev->node;
 	struct net_device *dev;
 	struct mscan_priv *priv;
 	void __iomem *base;
-	const char *clk_src;
-	int err, irq, clock_src;
+	const char *clock_name = NULL;
+	int irq, mscan_clksrc = 0;
+	int err = -ENOMEM;
 
-	base = of_iomap(ofdev->node, 0);
+	base = of_iomap(np, 0);
 	if (!base) {
 		dev_err(&ofdev->dev, "couldn't ioremap\n");
-		err = -ENOMEM;
-		goto exit_release_mem;
+		return err;
 	}
 
 	irq = irq_of_parse_and_map(np, 0);
@@ -114,37 +284,27 @@ static int __devinit mpc5xxx_can_probe(struct of_device *ofdev,
 	}
 
 	dev = alloc_mscandev();
-	if (!dev) {
-		err = -ENOMEM;
+	if (!dev)
 		goto exit_dispose_irq;
-	}
 
 	priv = netdev_priv(dev);
 	priv->reg_base = base;
 	dev->irq = irq;
 
-	/*
-	 * Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock
-	 * (IP_CLK) can be selected as MSCAN clock source. According to
-	 * the MPC5200 user's manual, the oscillator clock is the better
-	 * choice as it has less jitter. For this reason, it is selected
-	 * by default.
-	 */
-	clk_src = of_get_property(np, "fsl,mscan-clock-source", NULL);
-	if (clk_src && strcmp(clk_src, "ip") == 0)
-		clock_src = MSCAN_CLKSRC_BUS;
-	else
-		clock_src = MSCAN_CLKSRC_XTAL;
-	priv->can.clock.freq = mpc52xx_can_clock_freq(ofdev, clock_src);
+	clock_name = of_get_property(np, "fsl,mscan-clock-source", NULL);
+
+	BUG_ON(!data);
+	priv->type = data->type;
+	priv->can.clock.freq = data->get_clock(ofdev, clock_name,
+					       &mscan_clksrc);
 	if (!priv->can.clock.freq) {
-		dev_err(&ofdev->dev, "couldn't get MSCAN clock frequency\n");
-		err = -ENODEV;
+		dev_err(&ofdev->dev, "couldn't get MSCAN clock properties\n");
 		goto exit_free_mscan;
 	}
 
 	SET_NETDEV_DEV(dev, &ofdev->dev);
 
-	err = register_mscandev(dev, clock_src);
+	err = register_mscandev(dev, mscan_clksrc);
 	if (err) {
 		dev_err(&ofdev->dev, "registering %s failed (err=%d)\n",
 			DRV_NAME, err);
@@ -164,7 +324,7 @@ exit_dispose_irq:
 	irq_dispose_mapping(irq);
 exit_unmap_mem:
 	iounmap(base);
-exit_release_mem:
+
 	return err;
 }
 
@@ -225,8 +385,22 @@ static int mpc5xxx_can_resume(struct of_device *ofdev)
 }
 #endif
 
+#if 0
+static struct mpc5xxx_can_data __devinitdata mpc5200_can_data = {
+	.type = MSCAN_TYPE_MPC5200,
+	.get_clock = mpc52xx_can_get_clock,
+};
+
+static struct mpc5xxx_can_data __devinitdata mpc5121_can_data = {
+	.type = MSCAN_TYPE_MPC5121,
+	.get_clock = mpc512x_can_get_clock,
+};
+#endif
+
 static struct of_device_id __devinitdata mpc5xxx_can_table[] = {
-	{.compatible = "fsl,mpc5200-mscan"},
+	{ .compatible = "fsl,mpc5200-mscan", .data = &mpc5200_can_data },
+	/* Note that only MPC5121 Rev. 2 (and later) is supported */
+	{ .compatible = "fsl,mpc5121-mscan", .data = &mpc5121_can_data },
 	{},
 };
 
@@ -255,5 +429,5 @@ static void __exit mpc5xxx_can_exit(void)
 module_exit(mpc5xxx_can_exit);
 
 MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
-MODULE_DESCRIPTION("Freescale MPC5200 CAN driver");
+MODULE_DESCRIPTION("Freescale MPC5xxx CAN driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index 7df950e..d2c353f 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -169,6 +169,26 @@ static int mscan_start(struct net_device *dev)
 	return 0;
 }
 
+static int mscan_restart(struct net_device *dev)
+{
+	struct mscan_priv *priv = netdev_priv(dev);
+
+	if (priv->type == MSCAN_TYPE_MPC5121) {
+		struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+
+		priv->can.state = CAN_STATE_ERROR_ACTIVE;
+		WARN(!(in_8(&regs->canmisc) & MSCAN_BOHOLD),
+		     "bus-off state expected");
+		out_8(&regs->canmisc, MSCAN_BOHOLD);
+	} else {
+		if (priv->can.state <= CAN_STATE_BUS_OFF)
+			mscan_set_mode(dev, MSCAN_INIT_MODE);
+		return mscan_start(dev);
+	}
+
+	return 0;
+}
+
 static netdev_tx_t mscan_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct can_frame *frame = (struct can_frame *)skb->data;
@@ -363,9 +383,12 @@ static void mscan_get_err_frame(struct net_device *dev, struct can_frame *frame,
 			 * automatically. To avoid that we stop the chip doing
 			 * a light-weight stop (we are in irq-context).
 			 */
-			out_8(&regs->cantier, 0);
-			out_8(&regs->canrier, 0);
-			setbits8(&regs->canctl0, MSCAN_SLPRQ | MSCAN_INITRQ);
+			if (priv->type != MSCAN_TYPE_MPC5121) {
+				out_8(&regs->cantier, 0);
+				out_8(&regs->canrier, 0);
+				setbits8(&regs->canctl0,
+					 MSCAN_SLPRQ | MSCAN_INITRQ);
+			}
 			can_bus_off(dev);
 			break;
 		default:
@@ -495,9 +518,7 @@ static int mscan_do_set_mode(struct net_device *dev, enum can_mode mode)
 
 	switch (mode) {
 	case CAN_MODE_START:
-		if (priv->can.state <= CAN_STATE_BUS_OFF)
-			mscan_set_mode(dev, MSCAN_INIT_MODE);
-		ret = mscan_start(dev);
+		ret = mscan_restart(dev);
 		if (ret)
 			break;
 		if (netif_queue_stopped(dev))
@@ -596,18 +617,21 @@ static const struct net_device_ops mscan_netdev_ops = {
        .ndo_start_xmit         = mscan_start_xmit,
 };
 
-int register_mscandev(struct net_device *dev, int clock_src)
+int register_mscandev(struct net_device *dev, int mscan_clksrc)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
 	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
 	u8 ctl1;
 
 	ctl1 = in_8(&regs->canctl1);
-	if (clock_src)
+	if (mscan_clksrc)
 		ctl1 |= MSCAN_CLKSRC;
 	else
 		ctl1 &= ~MSCAN_CLKSRC;
 
+	if (priv->type == MSCAN_TYPE_MPC5121)
+		ctl1 |= MSCAN_BORM; /* bus-off recovery upon request */
+
 	ctl1 |= MSCAN_CANE;
 	out_8(&regs->canctl1, ctl1);
 	udelay(100);
diff --git a/drivers/net/can/mscan/mscan.h b/drivers/net/can/mscan/mscan.h
index 00fc4aa..897e5ac 100644
--- a/drivers/net/can/mscan/mscan.h
+++ b/drivers/net/can/mscan/mscan.h
@@ -38,18 +38,20 @@
 #define MSCAN_CLKSRC		0x40
 #define MSCAN_LOOPB		0x20
 #define MSCAN_LISTEN		0x10
+#define MSCAN_BORM		0x08
 #define MSCAN_WUPM		0x04
 #define MSCAN_SLPAK		0x02
 #define MSCAN_INITAK		0x01
 
-/* Use the MPC5200 MSCAN variant? */
+/* Use the MPC5XXX MSCAN variant? */
 #ifdef CONFIG_PPC
-#define MSCAN_FOR_MPC5200
+#define MSCAN_FOR_MPC5XXX
 #endif
 
-#ifdef MSCAN_FOR_MPC5200
+#ifdef MSCAN_FOR_MPC5XXX
 #define MSCAN_CLKSRC_BUS	0
 #define MSCAN_CLKSRC_XTAL	MSCAN_CLKSRC
+#define MSCAN_CLKSRC_IPS	MSCAN_CLKSRC
 #else
 #define MSCAN_CLKSRC_BUS	MSCAN_CLKSRC
 #define MSCAN_CLKSRC_XTAL	0
@@ -136,7 +138,7 @@
 #define MSCAN_EFF_RTR_SHIFT	0
 #define MSCAN_EFF_FLAGS		0x18	/* IDE + SRR */
 
-#ifdef MSCAN_FOR_MPC5200
+#ifdef MSCAN_FOR_MPC5XXX
 #define _MSCAN_RESERVED_(n, num) u8 _res##n[num]
 #define _MSCAN_RESERVED_DSR_SIZE	2
 #else
@@ -165,67 +167,66 @@ struct mscan_regs {
 	u8 cantbsel;				/* + 0x14     0x0a */
 	u8 canidac;				/* + 0x15     0x0b */
 	u8 reserved;				/* + 0x16     0x0c */
-	_MSCAN_RESERVED_(6, 5);			/* + 0x17          */
-#ifndef MSCAN_FOR_MPC5200
-	u8 canmisc;				/*            0x0d */
-#endif
+	_MSCAN_RESERVED_(6, 2);			/* + 0x17          */
+	u8 canmisc;				/* + 0x19     0x0d */
+	_MSCAN_RESERVED_(7, 2);			/* + 0x1a          */
 	u8 canrxerr;				/* + 0x1c     0x0e */
 	u8 cantxerr;				/* + 0x1d     0x0f */
-	_MSCAN_RESERVED_(7, 2);			/* + 0x1e          */
+	_MSCAN_RESERVED_(8, 2);			/* + 0x1e          */
 	u16 canidar1_0;				/* + 0x20     0x10 */
-	_MSCAN_RESERVED_(8, 2);			/* + 0x22          */
+	_MSCAN_RESERVED_(9, 2);			/* + 0x22          */
 	u16 canidar3_2;				/* + 0x24     0x12 */
-	_MSCAN_RESERVED_(9, 2);			/* + 0x26          */
+	_MSCAN_RESERVED_(10, 2);		/* + 0x26          */
 	u16 canidmr1_0;				/* + 0x28     0x14 */
-	_MSCAN_RESERVED_(10, 2);		/* + 0x2a          */
+	_MSCAN_RESERVED_(11, 2);		/* + 0x2a          */
 	u16 canidmr3_2;				/* + 0x2c     0x16 */
-	_MSCAN_RESERVED_(11, 2);		/* + 0x2e          */
+	_MSCAN_RESERVED_(12, 2);		/* + 0x2e          */
 	u16 canidar5_4;				/* + 0x30     0x18 */
-	_MSCAN_RESERVED_(12, 2);		/* + 0x32          */
+	_MSCAN_RESERVED_(13, 2);		/* + 0x32          */
 	u16 canidar7_6;				/* + 0x34     0x1a */
-	_MSCAN_RESERVED_(13, 2);		/* + 0x36          */
+	_MSCAN_RESERVED_(14, 2);		/* + 0x36          */
 	u16 canidmr5_4;				/* + 0x38     0x1c */
-	_MSCAN_RESERVED_(14, 2);		/* + 0x3a          */
+	_MSCAN_RESERVED_(15, 2);		/* + 0x3a          */
 	u16 canidmr7_6;				/* + 0x3c     0x1e */
-	_MSCAN_RESERVED_(15, 2);		/* + 0x3e          */
+	_MSCAN_RESERVED_(16, 2);		/* + 0x3e          */
 	struct {
 		u16 idr1_0;			/* + 0x40     0x20 */
-		 _MSCAN_RESERVED_(16, 2);	/* + 0x42          */
+		_MSCAN_RESERVED_(17, 2);	/* + 0x42          */
 		u16 idr3_2;			/* + 0x44     0x22 */
-		 _MSCAN_RESERVED_(17, 2);	/* + 0x46          */
+		_MSCAN_RESERVED_(18, 2);	/* + 0x46          */
 		u16 dsr1_0;			/* + 0x48     0x24 */
-		 _MSCAN_RESERVED_(18, 2);	/* + 0x4a          */
+		_MSCAN_RESERVED_(19, 2);	/* + 0x4a          */
 		u16 dsr3_2;			/* + 0x4c     0x26 */
-		 _MSCAN_RESERVED_(19, 2);	/* + 0x4e          */
+		_MSCAN_RESERVED_(20, 2);	/* + 0x4e          */
 		u16 dsr5_4;			/* + 0x50     0x28 */
-		 _MSCAN_RESERVED_(20, 2);	/* + 0x52          */
+		_MSCAN_RESERVED_(21, 2);	/* + 0x52          */
 		u16 dsr7_6;			/* + 0x54     0x2a */
-		 _MSCAN_RESERVED_(21, 2);	/* + 0x56          */
+		_MSCAN_RESERVED_(22, 2);	/* + 0x56          */
 		u8 dlr;				/* + 0x58     0x2c */
-		 u8:8;				/* + 0x59     0x2d */
-		 _MSCAN_RESERVED_(22, 2);	/* + 0x5a          */
+		u8 reserved;			/* + 0x59     0x2d */
+		_MSCAN_RESERVED_(23, 2);	/* + 0x5a          */
 		u16 time;			/* + 0x5c     0x2e */
 	} rx;
-	 _MSCAN_RESERVED_(23, 2);		/* + 0x5e          */
+	_MSCAN_RESERVED_(24, 2);		/* + 0x5e          */
 	struct {
 		u16 idr1_0;			/* + 0x60     0x30 */
-		 _MSCAN_RESERVED_(24, 2);	/* + 0x62          */
+		_MSCAN_RESERVED_(25, 2);	/* + 0x62          */
 		u16 idr3_2;			/* + 0x64     0x32 */
-		 _MSCAN_RESERVED_(25, 2);	/* + 0x66          */
+		_MSCAN_RESERVED_(26, 2);	/* + 0x66          */
 		u16 dsr1_0;			/* + 0x68     0x34 */
-		 _MSCAN_RESERVED_(26, 2);	/* + 0x6a          */
+		_MSCAN_RESERVED_(27, 2);	/* + 0x6a          */
 		u16 dsr3_2;			/* + 0x6c     0x36 */
-		 _MSCAN_RESERVED_(27, 2);	/* + 0x6e          */
+		_MSCAN_RESERVED_(28, 2);	/* + 0x6e          */
 		u16 dsr5_4;			/* + 0x70     0x38 */
-		 _MSCAN_RESERVED_(28, 2);	/* + 0x72          */
+		_MSCAN_RESERVED_(29, 2);	/* + 0x72          */
 		u16 dsr7_6;			/* + 0x74     0x3a */
-		 _MSCAN_RESERVED_(29, 2);	/* + 0x76          */
+		_MSCAN_RESERVED_(30, 2);	/* + 0x76          */
 		u8 dlr;				/* + 0x78     0x3c */
 		u8 tbpr;			/* + 0x79     0x3d */
-		 _MSCAN_RESERVED_(30, 2);	/* + 0x7a          */
+		_MSCAN_RESERVED_(31, 2);	/* + 0x7a          */
 		u16 time;			/* + 0x7c     0x3e */
 	} tx;
-	 _MSCAN_RESERVED_(31, 2);		/* + 0x7e          */
+	_MSCAN_RESERVED_(32, 2);		/* + 0x7e          */
 } __attribute__ ((packed));
 
 #undef _MSCAN_RESERVED_
@@ -238,6 +239,12 @@ struct mscan_regs {
 #define MSCAN_SET_MODE_RETRIES	255
 #define MSCAN_ECHO_SKB_MAX	3
 
+/* MSCAN type variants */
+enum {
+	MSCAN_TYPE_MPC5200,
+	MSCAN_TYPE_MPC5121
+};
+
 #define BTR0_BRP_MASK		0x3f
 #define BTR0_SJW_SHIFT		6
 #define BTR0_SJW_MASK		(0x3 << BTR0_SJW_SHIFT)
@@ -270,6 +277,7 @@ struct tx_queue_entry {
 
 struct mscan_priv {
 	struct can_priv can;	/* must be the first member */
+	unsigned int type; 	/* MSCAN type variants */
 	long open_time;
 	unsigned long flags;
 	void __iomem *reg_base;	/* ioremap'ed address to registers */
@@ -285,12 +293,7 @@ struct mscan_priv {
 };
 
 extern struct net_device *alloc_mscandev(void);
-/*
- * clock_src:
- *	1 = The MSCAN clock source is the onchip Bus Clock.
- *	0 = The MSCAN clock source is the chip Oscillator Clock.
- */
-extern int register_mscandev(struct net_device *dev, int clock_src);
+extern int register_mscandev(struct net_device *dev, int mscan_clksrc);
 extern void unregister_mscandev(struct net_device *dev);
 
 #endif /* __MSCAN_H__ */
-- 
1.6.2.5

[PATCH net-next v2 2/3] can: mscan-mpc5xxx: add support for the MPC512x processor

[Wolfgang Grandegger]

From: Wolfgang Grandegger <wg-ynQEQJNshbs@public.gmane.org>

The main differences compared to the MSCAN on the MPC5200 are:

- More flexibility in choosing the CAN source clock and frequency:

  Three different clock sources can be selected: "ip", "ref" or "sys".
  For the latter two, a clock divider can be defined as well. If the
  clock source is not specified by the device tree, we first try to
  find an optimal CAN source clock based on the system clock. If that
  is not possible, the reference clock will be used.

- The behavior of bus-off recovery is configurable:

  To comply with the usual handling of Socket-CAN bus-off recovery,
  "recovery on request" is selected (instead of automatic recovery).

Note that only MPC5121 Rev. 2 and later is supported.

Signed-off-by: Wolfgang Grandegger <wg-ynQEQJNshbs@public.gmane.org>
---
 drivers/net/can/mscan/Kconfig       |    7 +-
 drivers/net/can/mscan/mpc5xxx_can.c |  258 +++++++++++++++++++++++++++++------
 drivers/net/can/mscan/mscan.c       |   40 +++++-
 drivers/net/can/mscan/mscan.h       |   83 ++++++------
 4 files changed, 295 insertions(+), 93 deletions(-)

diff --git a/drivers/net/can/mscan/Kconfig b/drivers/net/can/mscan/Kconfig
index cd0f2d6..27d1d39 100644
--- a/drivers/net/can/mscan/Kconfig
+++ b/drivers/net/can/mscan/Kconfig
@@ -11,12 +11,13 @@ if CAN_MSCAN
 
 config CAN_MPC5XXX
 	tristate "Freescale MPC5xxx onboard CAN controller"
-	depends on PPC_MPC52xx
+	depends on (PPC_MPC52xx || PPC_MPC512x)
 	---help---
 	  If you say yes here you get support for Freescale's MPC5xxx
-	  onboard CAN controller.
+	  onboard CAN controller. Currently, the MPC5200, MPC5200B and
+	  MPC5121 (Rev. 2 and later) are supported.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called mscan-mpc5xxx.ko.
 
 endif
diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c
index 1de6f63..022e8be 100644
--- a/drivers/net/can/mscan/mpc5xxx_can.c
+++ b/drivers/net/can/mscan/mpc5xxx_can.c
@@ -29,6 +29,7 @@
 #include <linux/can/dev.h>
 #include <linux/of_platform.h>
 #include <sysdev/fsl_soc.h>
+#include <linux/clk.h>
 #include <linux/io.h>
 #include <asm/mpc52xx.h>
 
@@ -36,22 +37,21 @@
 
 #define DRV_NAME "mpc5xxx_can"
 
-static struct of_device_id mpc52xx_cdm_ids[] __devinitdata = {
+struct mpc5xxx_can_data {
+	unsigned int type;
+	u32 (*get_clock)(struct of_device *ofdev, const char *clock_name,
+			 int *mscan_clksrc);
+};
+
+#ifdef CONFIG_PPC_MPC5200
+static struct of_device_id __devinitdata mpc52xx_cdm_ids[] = {
 	{ .compatible = "fsl,mpc5200-cdm", },
 	{}
 };
 
-/*
- * Get frequency of the MSCAN clock source
- *
- * Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock (IP_CLK)
- * can be selected. According to the MPC5200 user's manual, the oscillator
- * clock is the better choice as it has less jitter but due to a hardware
- * bug, it can not be selected for the old MPC5200 Rev. A chips.
- */
-
-static unsigned int  __devinit mpc52xx_can_clock_freq(struct of_device *of,
-						      int clock_src)
+static u32 __devinit mpc52xx_can_get_clock(struct of_device *ofdev,
+					   const char *clock_name,
+					   int *mscan_clksrc)
 {
 	unsigned int pvr;
 	struct mpc52xx_cdm  __iomem *cdm;
@@ -61,11 +61,24 @@ static unsigned int  __devinit mpc52xx_can_clock_freq(struct of_device *of,
 
 	pvr = mfspr(SPRN_PVR);
 
-	freq = mpc5xxx_get_bus_frequency(of->node);
+	/*
+	 * Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock
+	 * (IP_CLK) can be selected as MSCAN clock source. According to
+	 * the MPC5200 user's manual, the oscillator clock is the better
+	 * choice as it has less jitter. For this reason, it is selected
+	 * by default. Unfortunately, it can not be selected for the old
+	 * MPC5200 Rev. A chips due to a hardware bug (check errata).
+	 */
+	if (clock_name && strcmp(clock_name, "ip") == 0)
+		*mscan_clksrc = MSCAN_CLKSRC_BUS;
+	else
+		*mscan_clksrc = MSCAN_CLKSRC_XTAL;
+
+	freq = mpc5xxx_get_bus_frequency(ofdev->node);
 	if (!freq)
 		return 0;
 
-	if (clock_src == MSCAN_CLKSRC_BUS || pvr == 0x80822011)
+	if (*mscan_clksrc == MSCAN_CLKSRC_BUS || pvr == 0x80822011)
 		return freq;
 
 	/* Determine SYS_XTAL_IN frequency from the clock domain settings */
@@ -75,7 +88,6 @@ static unsigned int  __devinit mpc52xx_can_clock_freq(struct of_device *of,
 		return 0;
 	}
 	cdm = of_iomap(np_cdm, 0);
-	of_node_put(np_cdm);
 
 	if (in_8(&cdm->ipb_clk_sel) & 0x1)
 		freq *= 2;
@@ -84,26 +96,184 @@ static unsigned int  __devinit mpc52xx_can_clock_freq(struct of_device *of,
 	freq *= (val & (1 << 5)) ? 8 : 4;
 	freq /= (val & (1 << 6)) ? 12 : 16;
 
+	of_node_put(np_cdm);
 	iounmap(cdm);
 
 	return freq;
 }
+#else /* !CONFIG_PPC_MPC5200 */
+static u32 __devinit mpc52xx_can_get_clock(struct of_device *ofdev,
+					   const char *clock_name,
+					   int *mscan_clksrc)
+{
+	return 0;
+}
+#endif /* CONFIG_PPC_MPC5200 */
+
+#ifdef CONFIG_PPC_MPC512x
+struct mpc512x_clockctl {
+	u32 spmr;		/* System PLL Mode Reg */
+	u32 sccr[2];		/* System Clk Ctrl Reg 1 & 2 */
+	u32 scfr1;		/* System Clk Freq Reg 1 */
+	u32 scfr2;		/* System Clk Freq Reg 2 */
+	u32 reserved;
+	u32 bcr;		/* Bread Crumb Reg */
+	u32 pccr[12];		/* PSC Clk Ctrl Reg 0-11 */
+	u32 spccr;		/* SPDIF Clk Ctrl Reg */
+	u32 cccr;		/* CFM Clk Ctrl Reg */
+	u32 dccr;		/* DIU Clk Cnfg Reg */
+	u32 mccr[4];		/* MSCAN Clk Ctrl Reg 1-3 */
+};
+
+static struct of_device_id __devinitdata mpc512x_clock_ids[] = {
+	{ .compatible = "fsl,mpc5121-clock", },
+	{}
+};
+
+static u32 __devinit mpc512x_can_get_clock(struct of_device *ofdev,
+					   const char *clock_name,
+					   int *mscan_clksrc)
+{
+	struct mpc512x_clockctl __iomem *clockctl;
+	struct device_node *np_clock;
+	struct clk *sys_clk, *ref_clk;
+	int plen, clockidx, clocksrc = -1;
+	u32 sys_freq, val, clockdiv = 1, freq = 0;
+	const u32 *pval;
+
+	np_clock = of_find_matching_node(NULL, mpc512x_clock_ids);
+	if (!np_clock) {
+		dev_err(&ofdev->dev, "couldn't find clock node\n");
+		return -ENODEV;
+	}
+	clockctl = of_iomap(np_clock, 0);
+	if (!clockctl) {
+		dev_err(&ofdev->dev, "couldn't map clock registers\n");
+		return 0;
+	}
+
+	/* Determine the MSCAN device index from the physical address */
+	pval = of_get_property(ofdev->node, "reg", &plen);
+	BUG_ON(!pval || plen < sizeof(*pval));
+	clockidx = (*pval & 0x80) ? 1 : 0;
+	if (*pval & 0x2000)
+		clockidx += 2;
+
+	/*
+	 * Clock source and divider selection: 3 different clock sources
+	 * can be selected: "ip", "ref" or "sys". For the latter two, a
+	 * clock divider can be defined as well. If the clock source is
+	 * not specified by the device tree, we first try to find an
+	 * optimal CAN source clock based on the system clock. If that
+	 * is not posslible, the reference clock will be used.
+	 */
+	if (clock_name && !strcmp(clock_name, "ip")) {
+		*mscan_clksrc = MSCAN_CLKSRC_IPS;
+		freq = mpc5xxx_get_bus_frequency(ofdev->node);
+	} else {
+		*mscan_clksrc = MSCAN_CLKSRC_BUS;
+
+		pval = of_get_property(ofdev->node,
+				       "fsl,mscan-clock-divider", &plen);
+		if (pval && plen == sizeof(*pval))
+			clockdiv = *pval;
+		if (!clockdiv)
+			clockdiv = 1;
+
+		if (!clock_name || !strcmp(clock_name, "sys")) {
+			sys_clk = clk_get(&ofdev->dev, "sys_clk");
+			if (!sys_clk) {
+				dev_err(&ofdev->dev, "couldn't get sys_clk\n");
+				goto exit_unmap;
+			}
+			/* Get and round up/down sys clock rate */
+			sys_freq = 1000000 *
+				((clk_get_rate(sys_clk) + 499999) / 1000000);
+
+			if (!clock_name) {
+				/* A multiple of 16 MHz would be optimal */
+				if ((sys_freq % 16000000) == 0) {
+					clocksrc = 0;
+					clockdiv = sys_freq / 16000000;
+					freq = sys_freq / clockdiv;
+				}
+			} else {
+				clocksrc = 0;
+				freq = sys_freq / clockdiv;
+			}
+		}
+
+		if (clocksrc < 0) {
+			ref_clk = clk_get(&ofdev->dev, "ref_clk");
+			if (!ref_clk) {
+				dev_err(&ofdev->dev, "couldn't get ref_clk\n");
+				goto exit_unmap;
+			}
+			clocksrc = 1;
+			freq = clk_get_rate(ref_clk) / clockdiv;
+		}
+	}
+
+	/* Disable clock */
+	out_be32(&clockctl->mccr[clockidx], 0x0);
+	if (clocksrc >= 0) {
+		/* Set source and divider */
+		val = (clocksrc << 14) | ((clockdiv - 1) << 17);
+		out_be32(&clockctl->mccr[clockidx], val);
+		/* Enable clock */
+		out_be32(&clockctl->mccr[clockidx], val | 0x10000);
+	}
+
+	/* Enable MSCAN clock domain */
+	val = in_be32(&clockctl->sccr[1]);
+	if (!(val & (1 << 25)))
+		out_be32(&clockctl->sccr[1], val | (1 << 25));
+
+	dev_dbg(&ofdev->dev, "using '%s' with frequency divider %d\n",
+		*mscan_clksrc == MSCAN_CLKSRC_IPS ? "ips_clk" :
+		clocksrc == 1 ? "ref_clk" : "sys_clk", clockdiv);
+
+exit_unmap:
+	of_node_put(np_clock);
+	iounmap(clockctl);
+
+	return freq;
+}
+#else /* !CONFIG_PPC_MPC512x */
+static u32 __devinit mpc512x_can_get_clock(struct of_device *ofdev,
+					   const char *clock_name,
+					   int *mscan_clksrc)
+{
+	return 0;
+}
+#endif /* CONFIG_PPC_MPC512x */
+
+static struct mpc5xxx_can_data __devinitdata mpc5200_can_data = {
+	.type = MSCAN_TYPE_MPC5200,
+	.get_clock = mpc52xx_can_get_clock,
+};
+
+static struct mpc5xxx_can_data __devinitdata mpc5121_can_data = {
+	.type = MSCAN_TYPE_MPC5121,
+	.get_clock = mpc512x_can_get_clock,
+};
 
 static int __devinit mpc5xxx_can_probe(struct of_device *ofdev,
 				       const struct of_device_id *id)
 {
+	struct mpc5xxx_can_data *data = (struct mpc5xxx_can_data *)id->data;
 	struct device_node *np = ofdev->node;
 	struct net_device *dev;
 	struct mscan_priv *priv;
 	void __iomem *base;
-	const char *clk_src;
-	int err, irq, clock_src;
+	const char *clock_name = NULL;
+	int irq, mscan_clksrc = 0;
+	int err = -ENOMEM;
 
-	base = of_iomap(ofdev->node, 0);
+	base = of_iomap(np, 0);
 	if (!base) {
 		dev_err(&ofdev->dev, "couldn't ioremap\n");
-		err = -ENOMEM;
-		goto exit_release_mem;
+		return err;
 	}
 
 	irq = irq_of_parse_and_map(np, 0);
@@ -114,37 +284,27 @@ static int __devinit mpc5xxx_can_probe(struct of_device *ofdev,
 	}
 
 	dev = alloc_mscandev();
-	if (!dev) {
-		err = -ENOMEM;
+	if (!dev)
 		goto exit_dispose_irq;
-	}
 
 	priv = netdev_priv(dev);
 	priv->reg_base = base;
 	dev->irq = irq;
 
-	/*
-	 * Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock
-	 * (IP_CLK) can be selected as MSCAN clock source. According to
-	 * the MPC5200 user's manual, the oscillator clock is the better
-	 * choice as it has less jitter. For this reason, it is selected
-	 * by default.
-	 */
-	clk_src = of_get_property(np, "fsl,mscan-clock-source", NULL);
-	if (clk_src && strcmp(clk_src, "ip") == 0)
-		clock_src = MSCAN_CLKSRC_BUS;
-	else
-		clock_src = MSCAN_CLKSRC_XTAL;
-	priv->can.clock.freq = mpc52xx_can_clock_freq(ofdev, clock_src);
+	clock_name = of_get_property(np, "fsl,mscan-clock-source", NULL);
+
+	BUG_ON(!data);
+	priv->type = data->type;
+	priv->can.clock.freq = data->get_clock(ofdev, clock_name,
+					       &mscan_clksrc);
 	if (!priv->can.clock.freq) {
-		dev_err(&ofdev->dev, "couldn't get MSCAN clock frequency\n");
-		err = -ENODEV;
+		dev_err(&ofdev->dev, "couldn't get MSCAN clock properties\n");
 		goto exit_free_mscan;
 	}
 
 	SET_NETDEV_DEV(dev, &ofdev->dev);
 
-	err = register_mscandev(dev, clock_src);
+	err = register_mscandev(dev, mscan_clksrc);
 	if (err) {
 		dev_err(&ofdev->dev, "registering %s failed (err=%d)\n",
 			DRV_NAME, err);
@@ -164,7 +324,7 @@ exit_dispose_irq:
 	irq_dispose_mapping(irq);
 exit_unmap_mem:
 	iounmap(base);
-exit_release_mem:
+
 	return err;
 }
 
@@ -225,8 +385,22 @@ static int mpc5xxx_can_resume(struct of_device *ofdev)
 }
 #endif
 
+#if 0
+static struct mpc5xxx_can_data __devinitdata mpc5200_can_data = {
+	.type = MSCAN_TYPE_MPC5200,
+	.get_clock = mpc52xx_can_get_clock,
+};
+
+static struct mpc5xxx_can_data __devinitdata mpc5121_can_data = {
+	.type = MSCAN_TYPE_MPC5121,
+	.get_clock = mpc512x_can_get_clock,
+};
+#endif
+
 static struct of_device_id __devinitdata mpc5xxx_can_table[] = {
-	{.compatible = "fsl,mpc5200-mscan"},
+	{ .compatible = "fsl,mpc5200-mscan", .data = &mpc5200_can_data },
+	/* Note that only MPC5121 Rev. 2 (and later) is supported */
+	{ .compatible = "fsl,mpc5121-mscan", .data = &mpc5121_can_data },
 	{},
 };
 
@@ -255,5 +429,5 @@ static void __exit mpc5xxx_can_exit(void)
 module_exit(mpc5xxx_can_exit);
 
 MODULE_AUTHOR("Wolfgang Grandegger <wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>");
-MODULE_DESCRIPTION("Freescale MPC5200 CAN driver");
+MODULE_DESCRIPTION("Freescale MPC5xxx CAN driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index 7df950e..d2c353f 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -169,6 +169,26 @@ static int mscan_start(struct net_device *dev)
 	return 0;
 }
 
+static int mscan_restart(struct net_device *dev)
+{
+	struct mscan_priv *priv = netdev_priv(dev);
+
+	if (priv->type == MSCAN_TYPE_MPC5121) {
+		struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+
+		priv->can.state = CAN_STATE_ERROR_ACTIVE;
+		WARN(!(in_8(&regs->canmisc) & MSCAN_BOHOLD),
+		     "bus-off state expected");
+		out_8(&regs->canmisc, MSCAN_BOHOLD);
+	} else {
+		if (priv->can.state <= CAN_STATE_BUS_OFF)
+			mscan_set_mode(dev, MSCAN_INIT_MODE);
+		return mscan_start(dev);
+	}
+
+	return 0;
+}
+
 static netdev_tx_t mscan_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct can_frame *frame = (struct can_frame *)skb->data;
@@ -363,9 +383,12 @@ static void mscan_get_err_frame(struct net_device *dev, struct can_frame *frame,
 			 * automatically. To avoid that we stop the chip doing
 			 * a light-weight stop (we are in irq-context).
 			 */
-			out_8(&regs->cantier, 0);
-			out_8(&regs->canrier, 0);
-			setbits8(&regs->canctl0, MSCAN_SLPRQ | MSCAN_INITRQ);
+			if (priv->type != MSCAN_TYPE_MPC5121) {
+				out_8(&regs->cantier, 0);
+				out_8(&regs->canrier, 0);
+				setbits8(&regs->canctl0,
+					 MSCAN_SLPRQ | MSCAN_INITRQ);
+			}
 			can_bus_off(dev);
 			break;
 		default:
@@ -495,9 +518,7 @@ static int mscan_do_set_mode(struct net_device *dev, enum can_mode mode)
 
 	switch (mode) {
 	case CAN_MODE_START:
-		if (priv->can.state <= CAN_STATE_BUS_OFF)
-			mscan_set_mode(dev, MSCAN_INIT_MODE);
-		ret = mscan_start(dev);
+		ret = mscan_restart(dev);
 		if (ret)
 			break;
 		if (netif_queue_stopped(dev))
@@ -596,18 +617,21 @@ static const struct net_device_ops mscan_netdev_ops = {
        .ndo_start_xmit         = mscan_start_xmit,
 };
 
-int register_mscandev(struct net_device *dev, int clock_src)
+int register_mscandev(struct net_device *dev, int mscan_clksrc)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
 	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
 	u8 ctl1;
 
 	ctl1 = in_8(&regs->canctl1);
-	if (clock_src)
+	if (mscan_clksrc)
 		ctl1 |= MSCAN_CLKSRC;
 	else
 		ctl1 &= ~MSCAN_CLKSRC;
 
+	if (priv->type == MSCAN_TYPE_MPC5121)
+		ctl1 |= MSCAN_BORM; /* bus-off recovery upon request */
+
 	ctl1 |= MSCAN_CANE;
 	out_8(&regs->canctl1, ctl1);
 	udelay(100);
diff --git a/drivers/net/can/mscan/mscan.h b/drivers/net/can/mscan/mscan.h
index 00fc4aa..897e5ac 100644
--- a/drivers/net/can/mscan/mscan.h
+++ b/drivers/net/can/mscan/mscan.h
@@ -38,18 +38,20 @@
 #define MSCAN_CLKSRC		0x40
 #define MSCAN_LOOPB		0x20
 #define MSCAN_LISTEN		0x10
+#define MSCAN_BORM		0x08
 #define MSCAN_WUPM		0x04
 #define MSCAN_SLPAK		0x02
 #define MSCAN_INITAK		0x01
 
-/* Use the MPC5200 MSCAN variant? */
+/* Use the MPC5XXX MSCAN variant? */
 #ifdef CONFIG_PPC
-#define MSCAN_FOR_MPC5200
+#define MSCAN_FOR_MPC5XXX
 #endif
 
-#ifdef MSCAN_FOR_MPC5200
+#ifdef MSCAN_FOR_MPC5XXX
 #define MSCAN_CLKSRC_BUS	0
 #define MSCAN_CLKSRC_XTAL	MSCAN_CLKSRC
+#define MSCAN_CLKSRC_IPS	MSCAN_CLKSRC
 #else
 #define MSCAN_CLKSRC_BUS	MSCAN_CLKSRC
 #define MSCAN_CLKSRC_XTAL	0
@@ -136,7 +138,7 @@
 #define MSCAN_EFF_RTR_SHIFT	0
 #define MSCAN_EFF_FLAGS		0x18	/* IDE + SRR */
 
-#ifdef MSCAN_FOR_MPC5200
+#ifdef MSCAN_FOR_MPC5XXX
 #define _MSCAN_RESERVED_(n, num) u8 _res##n[num]
 #define _MSCAN_RESERVED_DSR_SIZE	2
 #else
@@ -165,67 +167,66 @@ struct mscan_regs {
 	u8 cantbsel;				/* + 0x14     0x0a */
 	u8 canidac;				/* + 0x15     0x0b */
 	u8 reserved;				/* + 0x16     0x0c */
-	_MSCAN_RESERVED_(6, 5);			/* + 0x17          */
-#ifndef MSCAN_FOR_MPC5200
-	u8 canmisc;				/*            0x0d */
-#endif
+	_MSCAN_RESERVED_(6, 2);			/* + 0x17          */
+	u8 canmisc;				/* + 0x19     0x0d */
+	_MSCAN_RESERVED_(7, 2);			/* + 0x1a          */
 	u8 canrxerr;				/* + 0x1c     0x0e */
 	u8 cantxerr;				/* + 0x1d     0x0f */
-	_MSCAN_RESERVED_(7, 2);			/* + 0x1e          */
+	_MSCAN_RESERVED_(8, 2);			/* + 0x1e          */
 	u16 canidar1_0;				/* + 0x20     0x10 */
-	_MSCAN_RESERVED_(8, 2);			/* + 0x22          */
+	_MSCAN_RESERVED_(9, 2);			/* + 0x22          */
 	u16 canidar3_2;				/* + 0x24     0x12 */
-	_MSCAN_RESERVED_(9, 2);			/* + 0x26          */
+	_MSCAN_RESERVED_(10, 2);		/* + 0x26          */
 	u16 canidmr1_0;				/* + 0x28     0x14 */
-	_MSCAN_RESERVED_(10, 2);		/* + 0x2a          */
+	_MSCAN_RESERVED_(11, 2);		/* + 0x2a          */
 	u16 canidmr3_2;				/* + 0x2c     0x16 */
-	_MSCAN_RESERVED_(11, 2);		/* + 0x2e          */
+	_MSCAN_RESERVED_(12, 2);		/* + 0x2e          */
 	u16 canidar5_4;				/* + 0x30     0x18 */
-	_MSCAN_RESERVED_(12, 2);		/* + 0x32          */
+	_MSCAN_RESERVED_(13, 2);		/* + 0x32          */
 	u16 canidar7_6;				/* + 0x34     0x1a */
-	_MSCAN_RESERVED_(13, 2);		/* + 0x36          */
+	_MSCAN_RESERVED_(14, 2);		/* + 0x36          */
 	u16 canidmr5_4;				/* + 0x38     0x1c */
-	_MSCAN_RESERVED_(14, 2);		/* + 0x3a          */
+	_MSCAN_RESERVED_(15, 2);		/* + 0x3a          */
 	u16 canidmr7_6;				/* + 0x3c     0x1e */
-	_MSCAN_RESERVED_(15, 2);		/* + 0x3e          */
+	_MSCAN_RESERVED_(16, 2);		/* + 0x3e          */
 	struct {
 		u16 idr1_0;			/* + 0x40     0x20 */
-		 _MSCAN_RESERVED_(16, 2);	/* + 0x42          */
+		_MSCAN_RESERVED_(17, 2);	/* + 0x42          */
 		u16 idr3_2;			/* + 0x44     0x22 */
-		 _MSCAN_RESERVED_(17, 2);	/* + 0x46          */
+		_MSCAN_RESERVED_(18, 2);	/* + 0x46          */
 		u16 dsr1_0;			/* + 0x48     0x24 */
-		 _MSCAN_RESERVED_(18, 2);	/* + 0x4a          */
+		_MSCAN_RESERVED_(19, 2);	/* + 0x4a          */
 		u16 dsr3_2;			/* + 0x4c     0x26 */
-		 _MSCAN_RESERVED_(19, 2);	/* + 0x4e          */
+		_MSCAN_RESERVED_(20, 2);	/* + 0x4e          */
 		u16 dsr5_4;			/* + 0x50     0x28 */
-		 _MSCAN_RESERVED_(20, 2);	/* + 0x52          */
+		_MSCAN_RESERVED_(21, 2);	/* + 0x52          */
 		u16 dsr7_6;			/* + 0x54     0x2a */
-		 _MSCAN_RESERVED_(21, 2);	/* + 0x56          */
+		_MSCAN_RESERVED_(22, 2);	/* + 0x56          */
 		u8 dlr;				/* + 0x58     0x2c */
-		 u8:8;				/* + 0x59     0x2d */
-		 _MSCAN_RESERVED_(22, 2);	/* + 0x5a          */
+		u8 reserved;			/* + 0x59     0x2d */
+		_MSCAN_RESERVED_(23, 2);	/* + 0x5a          */
 		u16 time;			/* + 0x5c     0x2e */
 	} rx;
-	 _MSCAN_RESERVED_(23, 2);		/* + 0x5e          */
+	_MSCAN_RESERVED_(24, 2);		/* + 0x5e          */
 	struct {
 		u16 idr1_0;			/* + 0x60     0x30 */
-		 _MSCAN_RESERVED_(24, 2);	/* + 0x62          */
+		_MSCAN_RESERVED_(25, 2);	/* + 0x62          */
 		u16 idr3_2;			/* + 0x64     0x32 */
-		 _MSCAN_RESERVED_(25, 2);	/* + 0x66          */
+		_MSCAN_RESERVED_(26, 2);	/* + 0x66          */
 		u16 dsr1_0;			/* + 0x68     0x34 */
-		 _MSCAN_RESERVED_(26, 2);	/* + 0x6a          */
+		_MSCAN_RESERVED_(27, 2);	/* + 0x6a          */
 		u16 dsr3_2;			/* + 0x6c     0x36 */
-		 _MSCAN_RESERVED_(27, 2);	/* + 0x6e          */
+		_MSCAN_RESERVED_(28, 2);	/* + 0x6e          */
 		u16 dsr5_4;			/* + 0x70     0x38 */
-		 _MSCAN_RESERVED_(28, 2);	/* + 0x72          */
+		_MSCAN_RESERVED_(29, 2);	/* + 0x72          */
 		u16 dsr7_6;			/* + 0x74     0x3a */
-		 _MSCAN_RESERVED_(29, 2);	/* + 0x76          */
+		_MSCAN_RESERVED_(30, 2);	/* + 0x76          */
 		u8 dlr;				/* + 0x78     0x3c */
 		u8 tbpr;			/* + 0x79     0x3d */
-		 _MSCAN_RESERVED_(30, 2);	/* + 0x7a          */
+		_MSCAN_RESERVED_(31, 2);	/* + 0x7a          */
 		u16 time;			/* + 0x7c     0x3e */
 	} tx;
-	 _MSCAN_RESERVED_(31, 2);		/* + 0x7e          */
+	_MSCAN_RESERVED_(32, 2);		/* + 0x7e          */
 } __attribute__ ((packed));
 
 #undef _MSCAN_RESERVED_
@@ -238,6 +239,12 @@ struct mscan_regs {
 #define MSCAN_SET_MODE_RETRIES	255
 #define MSCAN_ECHO_SKB_MAX	3
 
+/* MSCAN type variants */
+enum {
+	MSCAN_TYPE_MPC5200,
+	MSCAN_TYPE_MPC5121
+};
+
 #define BTR0_BRP_MASK		0x3f
 #define BTR0_SJW_SHIFT		6
 #define BTR0_SJW_MASK		(0x3 << BTR0_SJW_SHIFT)
@@ -270,6 +277,7 @@ struct tx_queue_entry {
 
 struct mscan_priv {
 	struct can_priv can;	/* must be the first member */
+	unsigned int type; 	/* MSCAN type variants */
 	long open_time;
 	unsigned long flags;
 	void __iomem *reg_base;	/* ioremap'ed address to registers */
@@ -285,12 +293,7 @@ struct mscan_priv {
 };
 
 extern struct net_device *alloc_mscandev(void);
-/*
- * clock_src:
- *	1 = The MSCAN clock source is the onchip Bus Clock.
- *	0 = The MSCAN clock source is the chip Oscillator Clock.
- */
-extern int register_mscandev(struct net_device *dev, int clock_src);
+extern int register_mscandev(struct net_device *dev, int mscan_clksrc);
 extern void unregister_mscandev(struct net_device *dev);
 
 #endif /* __MSCAN_H__ */
-- 
1.6.2.5

[PATCH net-next v2 3/3] powerpc/mpc5xxx: add OF platform binding doc for FSL MSCAN devices

[Wolfgang Grandegger]

From: Wolfgang Grandegger <wg@denx.de>

This patch adds documentation for the MSCAN OF device bindings for
the MPC512x and moves the one for the MPC5200 to the new common file
"Documentation/powerpc/dts-bindings/fsl/can.txt".

Signed-off-by: Wolfgang Grandegger <wg@denx.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
---
 Documentation/powerpc/dts-bindings/fsl/can.txt     |   53 ++++++++++++++++++++
 Documentation/powerpc/dts-bindings/fsl/mpc5200.txt |    9 +---
 2 files changed, 54 insertions(+), 8 deletions(-)
 create mode 100644 Documentation/powerpc/dts-bindings/fsl/can.txt

diff --git a/Documentation/powerpc/dts-bindings/fsl/can.txt b/Documentation/powerpc/dts-bindings/fsl/can.txt
new file mode 100644
index 0000000..2fa4fcd
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/can.txt
@@ -0,0 +1,53 @@
+CAN Device Tree Bindings
+------------------------
+
+(c) 2006-2009 Secret Lab Technologies Ltd
+Grant Likely <grant.likely@secretlab.ca>
+
+fsl,mpc5200-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+			   are:	"ip" for ip bus clock
+				 "ref" for reference clock (XTAL)
+			   "ref" is default in case this property is not
+			   present.
+
+fsl,mpc5121-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source and divider shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+			   are:	"ip" for ip bus clock
+				"ref" for reference clock
+				"sys" for system clock
+			   If this property is not present, an optimal CAN
+			   clock source and frequency based on the system
+			   clock will be selected. If this is not possible,
+			   the reference clock will be used.
+
+- fsl,mscan-clock-divider: for the reference and system clock, an additional
+			   clock divider can be specified. By default, a
+			   value of 1 is used.
+
+Note that the MPC5121 Rev. 1 processor is not supported.
+
+Examples:
+	can@1300 {
+		compatible = "fsl,mpc5121-mscan";
+		interrupts = <12 0x8>;
+		interrupt-parent = <&ipic>;
+		reg = <0x1300 0x80>;
+	};
+
+	can@1380 {
+		compatible = "fsl,mpc5121-mscan";
+		interrupts = <13 0x8>;
+		interrupt-parent = <&ipic>;
+		reg = <0x1380 0x80>;
+		fsl,mscan-clock-source = "ref";
+		fsl,mscan-clock-divider = <3>;
+	};
diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
index cabc780..95accfa 100644
--- a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
@@ -180,11 +180,4 @@ External interrupts:
 
 fsl,mpc5200-mscan nodes
 -----------------------
-In addition to the required compatible-, reg- and interrupt-properites, you can
-also specify which clock source shall be used for the controller:
-
-- fsl,mscan-clock-source- a string describing the clock source. Valid values
-			  are:	"ip" for ip bus clock
-				"ref" for reference clock (XTAL)
-			  "ref" is default in case this property is not
-			  present.
+See file can.txt in this directory.
-- 
1.6.2.5

[PATCH net-next v2 3/3] powerpc/mpc5xxx: add OF platform binding doc for FSL MSCAN devices

[Wolfgang Grandegger]

From: Wolfgang Grandegger <wg-ynQEQJNshbs@public.gmane.org>

This patch adds documentation for the MSCAN OF device bindings for
the MPC512x and moves the one for the MPC5200 to the new common file
"Documentation/powerpc/dts-bindings/fsl/can.txt".

Signed-off-by: Wolfgang Grandegger <wg-ynQEQJNshbs@public.gmane.org>
Acked-by: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 Documentation/powerpc/dts-bindings/fsl/can.txt     |   53 ++++++++++++++++++++
 Documentation/powerpc/dts-bindings/fsl/mpc5200.txt |    9 +---
 2 files changed, 54 insertions(+), 8 deletions(-)
 create mode 100644 Documentation/powerpc/dts-bindings/fsl/can.txt

diff --git a/Documentation/powerpc/dts-bindings/fsl/can.txt b/Documentation/powerpc/dts-bindings/fsl/can.txt
new file mode 100644
index 0000000..2fa4fcd
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/can.txt
@@ -0,0 +1,53 @@
+CAN Device Tree Bindings
+------------------------
+
+(c) 2006-2009 Secret Lab Technologies Ltd
+Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
+
+fsl,mpc5200-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+			   are:	"ip" for ip bus clock
+				 "ref" for reference clock (XTAL)
+			   "ref" is default in case this property is not
+			   present.
+
+fsl,mpc5121-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source and divider shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+			   are:	"ip" for ip bus clock
+				"ref" for reference clock
+				"sys" for system clock
+			   If this property is not present, an optimal CAN
+			   clock source and frequency based on the system
+			   clock will be selected. If this is not possible,
+			   the reference clock will be used.
+
+- fsl,mscan-clock-divider: for the reference and system clock, an additional
+			   clock divider can be specified. By default, a
+			   value of 1 is used.
+
+Note that the MPC5121 Rev. 1 processor is not supported.
+
+Examples:
+	can@1300 {
+		compatible = "fsl,mpc5121-mscan";
+		interrupts = <12 0x8>;
+		interrupt-parent = <&ipic>;
+		reg = <0x1300 0x80>;
+	};
+
+	can@1380 {
+		compatible = "fsl,mpc5121-mscan";
+		interrupts = <13 0x8>;
+		interrupt-parent = <&ipic>;
+		reg = <0x1380 0x80>;
+		fsl,mscan-clock-source = "ref";
+		fsl,mscan-clock-divider = <3>;
+	};
diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
index cabc780..95accfa 100644
--- a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
@@ -180,11 +180,4 @@ External interrupts:
 
 fsl,mpc5200-mscan nodes
 -----------------------
-In addition to the required compatible-, reg- and interrupt-properites, you can
-also specify which clock source shall be used for the controller:
-
-- fsl,mscan-clock-source- a string describing the clock source. Valid values
-			  are:	"ip" for ip bus clock
-				"ref" for reference clock (XTAL)
-			  "ref" is default in case this property is not
-			  present.
+See file can.txt in this directory.
-- 
1.6.2.5

Re: [PATCH net-next v2 0/3] can: mscan-mpc5xxx: add support for the Freescale MPC512x

[Wolfgang Grandegger]

Wolfgang Grandegger wrote:
> This patch series adds support for the MPC512x from Freescale to
> the mpc5xxx_can MSCAN driver.
> 
> Changes since v1:
> 
> - Various coding style issues, printk formats, variable names and
>   error messagaes and typos fixes or improved
> 
> - MPC5xxx specific data are now passed to mpc5xxx_can_probe() via
>   "of_device_id->data".
> 
> - The index of the MPC512x CAN controller is now derived directly
>   from reg property. This allows use of_iomap() as usual.
> 
> - It has been documented that MPC512x Rev.1 CPUs are not supported.

As you might have already realized, this patch set slipped out
accidentally to the mailing list due to a bug in my
patch-format-test-and-send-email script. Nevertheless, it's good enough
for reviewing and testing. Just some debugging code needs to be removed.
Wolfram, is it OK from your point of view now? I will roll out v3 after
some  more thorough testing tomorrow.

Wolfgang.

Re: [PATCH net-next v2 0/3] can: mscan-mpc5xxx: add support for the Freescale MPC512x

[Wolfgang Grandegger]

Wolfgang Grandegger wrote:
> This patch series adds support for the MPC512x from Freescale to
> the mpc5xxx_can MSCAN driver.
> 
> Changes since v1:
> 
> - Various coding style issues, printk formats, variable names and
>   error messagaes and typos fixes or improved
> 
> - MPC5xxx specific data are now passed to mpc5xxx_can_probe() via
>   "of_device_id->data".
> 
> - The index of the MPC512x CAN controller is now derived directly
>   from reg property. This allows use of_iomap() as usual.
> 
> - It has been documented that MPC512x Rev.1 CPUs are not supported.

As you might have already realized, this patch set slipped out
accidentally to the mailing list due to a bug in my
patch-format-test-and-send-email script. Nevertheless, it's good enough
for reviewing and testing. Just some debugging code needs to be removed.
Wolfram, is it OK from your point of view now? I will roll out v3 after
some  more thorough testing tomorrow.

Wolfgang.

Re: [PATCH net-next v2 0/3] can: mscan-mpc5xxx: add support for the Freescale MPC512x

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 380 bytes --]

> Wolfram, is it OK from your point of view now? I will roll out v3 after
> some  more thorough testing tomorrow.

It still works here and, as I see it, all issues were resolved as discussed.

Thanks,

   Wolfram

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

Re: [PATCH net-next v2 0/3] can: mscan-mpc5xxx: add support for the Freescale MPC512x

[Wolfram Sang]

[-- Attachment #1.1: Type: text/plain, Size: 380 bytes --]

> Wolfram, is it OK from your point of view now? I will roll out v3 after
> some  more thorough testing tomorrow.

It still works here and, as I see it, all issues were resolved as discussed.

Thanks,

   Wolfram

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

[-- Attachment #2: Type: text/plain, Size: 188 bytes --]

_______________________________________________
Socketcan-core mailing list
Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org
https://lists.berlios.de/mailman/listinfo/socketcan-core

Re: [PATCH net-next v2 0/3] can: mscan-mpc5xxx: add support for the Freescale MPC512x

[Wolfgang Grandegger]

Wolfram Sang wrote:
>> Wolfram, is it OK from your point of view now? I will roll out v3 after
>> some  more thorough testing tomorrow.
> 
> It still works here and, as I see it, all issues were resolved as discussed.

OK, fine if I add your acked-by then?

Thanks,

Wolfgang.

Re: [PATCH net-next v2 0/3] can: mscan-mpc5xxx: add support for the Freescale MPC512x

[Wolfgang Grandegger]

Wolfram Sang wrote:
>> Wolfram, is it OK from your point of view now? I will roll out v3 after
>> some  more thorough testing tomorrow.
> 
> It still works here and, as I see it, all issues were resolved as discussed.

OK, fine if I add your acked-by then?

Thanks,

Wolfgang.

Re: [PATCH net-next v2 0/3] can: mscan-mpc5xxx: add support for the Freescale MPC512x

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 367 bytes --]

> > It still works here and, as I see it, all issues were resolved as discussed.
> 
> OK, fine if I add your acked-by then?

I wanted to add a 'Reviewed-by' after I checked V3.

Regards,

   Wolfram

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

Re: [PATCH net-next v2 0/3] can: mscan-mpc5xxx: add support for the Freescale MPC512x

[Wolfram Sang]

[-- Attachment #1.1: Type: text/plain, Size: 367 bytes --]

> > It still works here and, as I see it, all issues were resolved as discussed.
> 
> OK, fine if I add your acked-by then?

I wanted to add a 'Reviewed-by' after I checked V3.

Regards,

   Wolfram

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

[-- Attachment #2: Type: text/plain, Size: 188 bytes --]

_______________________________________________
Socketcan-core mailing list
Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org
https://lists.berlios.de/mailman/listinfo/socketcan-core

[PATCH net-next v2 0/3] can: mscan-mpc5xxx: add support for the Freescale MPC512x

[Wolfgang Grandegger]

This patch series adds support for the MPC512x from Freescale to
the mpc5xxx_can MSCAN driver.

Changes since v1:

- Various coding style issues, printk formats, variable names and
  error messagaes and typos fixes or improved

- MPC5xxx specific data are now passed to mpc5xxx_can_probe() via
  of_device_id-

Wolfgang Grandegger (3):
  can: mscan: fix improper return if dlc < 8 in start_xmit function
  can: mscan-mpc5xxx: add support for the MPC512x processor
  powerpc/mpc5xxx: add OF platform binding doc for FSL MSCAN devices

 Documentation/powerpc/dts-bindings/fsl/can.txt     |   53 ++++
 Documentation/powerpc/dts-bindings/fsl/mpc5200.txt |    9 +-
 drivers/net/can/mscan/Kconfig                      |    7 +-
 drivers/net/can/mscan/mpc5xxx_can.c                |  258 ++++++++++++++++----
 drivers/net/can/mscan/mscan.c                      |   51 +++-
 drivers/net/can/mscan/mscan.h                      |   83 ++++---
 6 files changed, 357 insertions(+), 104 deletions(-)
 create mode 100644 Documentation/powerpc/dts-bindings/fsl/can.txt

[PATCH net-next v2 0/3] can: mscan-mpc5xxx: add support for the Freescale MPC512x

[Wolfgang Grandegger]

This patch series adds support for the MPC512x from Freescale to
the mpc5xxx_can MSCAN driver.

Changes since v1:

- Various coding style issues, printk formats, variable names and
  error messagaes and typos fixes or improved

- MPC5xxx specific data are now passed to mpc5xxx_can_probe() via
  of_device_id-

Wolfgang Grandegger (3):
  can: mscan: fix improper return if dlc < 8 in start_xmit function
  can: mscan-mpc5xxx: add support for the MPC512x processor
  powerpc/mpc5xxx: add OF platform binding doc for FSL MSCAN devices

 Documentation/powerpc/dts-bindings/fsl/can.txt     |   53 ++++
 Documentation/powerpc/dts-bindings/fsl/mpc5200.txt |    9 +-
 drivers/net/can/mscan/Kconfig                      |    7 +-
 drivers/net/can/mscan/mpc5xxx_can.c                |  258 ++++++++++++++++----
 drivers/net/can/mscan/mscan.c                      |   51 +++-
 drivers/net/can/mscan/mscan.h                      |   83 ++++---
 6 files changed, 357 insertions(+), 104 deletions(-)
 create mode 100644 Documentation/powerpc/dts-bindings/fsl/can.txt