From: Wolfgang Grandegger <wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
To: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
Linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
Wolfgang Grandegger <wg-ynQEQJNshbs@public.gmane.org>,
Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Subject: Re: [PATCH v4 1/3] i2c-mpc: use __devinit[data] for initialization functions and data
Date: Wed, 10 Feb 2010 11:09:25 +0100 [thread overview]
Message-ID: <4B7285D5.9060008@grandegger.com> (raw)
In-Reply-To: <fa686aa41002090941je3e4fdqbecf2616a8b90e42-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
Grant Likely wrote:
> On Thu, Jan 28, 2010 at 6:25 AM, Wolfgang Grandegger <wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org> wrote:
>> From: Wolfgang Grandegger <wg-ynQEQJNshbs@public.gmane.org>
>>
>> "__devinit[data]" has not yet been used for all initialization functions
>> and data. To avoid truncating lines, the struct "mpc_i2c_match_data" has
>> been renamed to "mpc_i2c_data", which is even the better name.
>>
>> Signed-off-by: Wolfgang Grandegger <wg-ynQEQJNshbs@public.gmane.org>
>
> Several comments below.
>
>> ---
>> drivers/i2c/busses/i2c-mpc.c | 103 +++++++++++++++++++----------------------
>> 1 files changed, 48 insertions(+), 55 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
>> index f627001..275ebe6 100644
>> --- a/drivers/i2c/busses/i2c-mpc.c
>> +++ b/drivers/i2c/busses/i2c-mpc.c
>> @@ -66,7 +66,7 @@ struct mpc_i2c_divider {
>> u16 fdr; /* including dfsrr */
>> };
>>
>> -struct mpc_i2c_match_data {
>> +struct mpc_i2c_data {
>> void (*setclock)(struct device_node *node,
>> struct mpc_i2c *i2c,
>> u32 clock, u32 prescaler);
>> @@ -165,7 +165,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
>> }
>>
>> #ifdef CONFIG_PPC_MPC52xx
>> -static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
>> +static const struct __devinitdata mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
>
> __devinitdata goes at the end, immediately before the '='. Ditto
> throughout the file.
This made a difference and revealed section mismatches. "const" seems to
be incompatible with "__devinitdata".
>> {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
>> {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
>> {36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28},
>> @@ -582,44 +584,35 @@ static int __devexit fsl_i2c_remove(struct of_device *op)
>> return 0;
>> };
>>
>> +static struct mpc_i2c_data __devinitdata mpc_i2c_data_52xx = {
>> + .setclock = mpc_i2c_setclock_52xx,
>> +};
>> +
>> +static struct mpc_i2c_data __devinitdata mpc_i2c_data_8313 = {
>> + .setclock = mpc_i2c_setclock_8xxx,
>> +};
>> +
>> +static struct mpc_i2c_data __devinitdata mpc_i2c_data_8543 = {
>> + .setclock = mpc_i2c_setclock_8xxx,
>> + .prescaler = 2,
>> +};
>> +
>> +static struct mpc_i2c_data __devinitdata mpc_i2c_data_8544 = {
>> + .setclock = mpc_i2c_setclock_8xxx,
>> + .prescaler = 3,
>> +};
>> +
>> static const struct of_device_id mpc_i2c_of_match[] = {
>
> You can make this __devinitdata too.
This results in a section mismatch as it's referenced by fsl_i2c_init().
I just sent out v6. Hope it's OK now.
Thanks,
Wolfgang.
WARNING: multiple messages have this Message-ID (diff)
From: Wolfgang Grandegger <wg@grandegger.com>
To: Grant Likely <grant.likely@secretlab.ca>
Cc: Ben Dooks <ben-linux@fluff.org>,
Devicetree-discuss@lists.ozlabs.org,
Linuxppc-dev@lists.ozlabs.org, Linux-i2c@vger.kernel.org,
Wolfgang Grandegger <wg@denx.de>
Subject: Re: [PATCH v4 1/3] i2c-mpc: use __devinit[data] for initialization functions and data
Date: Wed, 10 Feb 2010 11:09:25 +0100 [thread overview]
Message-ID: <4B7285D5.9060008@grandegger.com> (raw)
In-Reply-To: <fa686aa41002090941je3e4fdqbecf2616a8b90e42@mail.gmail.com>
Grant Likely wrote:
> On Thu, Jan 28, 2010 at 6:25 AM, Wolfgang Grandegger <wg@grandegger.com> wrote:
>> From: Wolfgang Grandegger <wg@denx.de>
>>
>> "__devinit[data]" has not yet been used for all initialization functions
>> and data. To avoid truncating lines, the struct "mpc_i2c_match_data" has
>> been renamed to "mpc_i2c_data", which is even the better name.
>>
>> Signed-off-by: Wolfgang Grandegger <wg@denx.de>
>
> Several comments below.
>
>> ---
>> drivers/i2c/busses/i2c-mpc.c | 103 +++++++++++++++++++----------------------
>> 1 files changed, 48 insertions(+), 55 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
>> index f627001..275ebe6 100644
>> --- a/drivers/i2c/busses/i2c-mpc.c
>> +++ b/drivers/i2c/busses/i2c-mpc.c
>> @@ -66,7 +66,7 @@ struct mpc_i2c_divider {
>> u16 fdr; /* including dfsrr */
>> };
>>
>> -struct mpc_i2c_match_data {
>> +struct mpc_i2c_data {
>> void (*setclock)(struct device_node *node,
>> struct mpc_i2c *i2c,
>> u32 clock, u32 prescaler);
>> @@ -165,7 +165,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
>> }
>>
>> #ifdef CONFIG_PPC_MPC52xx
>> -static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
>> +static const struct __devinitdata mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
>
> __devinitdata goes at the end, immediately before the '='. Ditto
> throughout the file.
This made a difference and revealed section mismatches. "const" seems to
be incompatible with "__devinitdata".
>> {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
>> {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
>> {36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28},
>> @@ -582,44 +584,35 @@ static int __devexit fsl_i2c_remove(struct of_device *op)
>> return 0;
>> };
>>
>> +static struct mpc_i2c_data __devinitdata mpc_i2c_data_52xx = {
>> + .setclock = mpc_i2c_setclock_52xx,
>> +};
>> +
>> +static struct mpc_i2c_data __devinitdata mpc_i2c_data_8313 = {
>> + .setclock = mpc_i2c_setclock_8xxx,
>> +};
>> +
>> +static struct mpc_i2c_data __devinitdata mpc_i2c_data_8543 = {
>> + .setclock = mpc_i2c_setclock_8xxx,
>> + .prescaler = 2,
>> +};
>> +
>> +static struct mpc_i2c_data __devinitdata mpc_i2c_data_8544 = {
>> + .setclock = mpc_i2c_setclock_8xxx,
>> + .prescaler = 3,
>> +};
>> +
>> static const struct of_device_id mpc_i2c_of_match[] = {
>
> You can make this __devinitdata too.
This results in a section mismatch as it's referenced by fsl_i2c_init().
I just sent out v6. Hope it's OK now.
Thanks,
Wolfgang.
next prev parent reply other threads:[~2010-02-10 10:09 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-28 13:25 [PATCH v4 0/3] i2c-mpc: add support for the Freescale MPC512x and other fixes Wolfgang Grandegger
2010-01-28 13:25 ` Wolfgang Grandegger
[not found] ` <1264685141-26391-1-git-send-email-wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2010-01-28 13:25 ` [PATCH v4 1/3] i2c-mpc: use __devinit[data] for initialization functions and data Wolfgang Grandegger
2010-01-28 13:25 ` Wolfgang Grandegger
2010-01-29 16:15 ` Wolfram Sang
2010-01-29 16:15 ` Wolfram Sang
[not found] ` <1264685141-26391-2-git-send-email-wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2010-01-28 13:25 ` [PATCH v4 2/3] i2c-mpc: add support for the MPC512x processors from Freescale Wolfgang Grandegger
2010-01-28 13:25 ` Wolfgang Grandegger
[not found] ` <1264685141-26391-3-git-send-email-wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2010-01-28 13:25 ` [PATCH v4 3/3] powerpc: doc/dts-bindings: update doc of FSL I2C bindings Wolfgang Grandegger
2010-01-28 13:25 ` Wolfgang Grandegger
[not found] ` <1264685141-26391-4-git-send-email-wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2010-01-29 16:26 ` Wolfram Sang
2010-01-29 16:26 ` Wolfram Sang
2010-02-09 17:50 ` Grant Likely
2010-02-09 17:50 ` Grant Likely
[not found] ` <fa686aa41002090950w2c3cd008k47784089dd3417d7-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-02-09 18:57 ` Wolfgang Grandegger
2010-02-09 18:57 ` Wolfgang Grandegger
[not found] ` <4B71AFFC.3010301-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2010-02-09 19:23 ` Wolfgang Grandegger
2010-02-09 19:23 ` Wolfgang Grandegger
[not found] ` <4B71B618.6020807-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2010-02-09 22:15 ` Grant Likely
2010-02-09 22:15 ` Grant Likely
2010-01-29 16:24 ` [PATCH v4 2/3] i2c-mpc: add support for the MPC512x processors from Freescale Wolfram Sang
2010-01-29 16:24 ` Wolfram Sang
2010-02-09 17:45 ` Grant Likely
2010-02-09 17:45 ` Grant Likely
2010-02-09 17:41 ` [PATCH v4 1/3] i2c-mpc: use __devinit[data] for initialization functions and data Grant Likely
2010-02-09 17:41 ` Grant Likely
[not found] ` <fa686aa41002090941je3e4fdqbecf2616a8b90e42-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-02-10 10:09 ` Wolfgang Grandegger [this message]
2010-02-10 10:09 ` Wolfgang Grandegger
[not found] ` <4B7285D5.9060008-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2010-02-10 10:32 ` Stephen Rothwell
2010-02-10 10:32 ` Stephen Rothwell
[not found] ` <20100210213203.48a9105e.sfr-3FnU+UHB4dNDw9hX6IcOSA@public.gmane.org>
2010-02-10 10:53 ` Wolfgang Grandegger
2010-02-10 10:53 ` Wolfgang Grandegger
[not found] ` <4B729043.9080303-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2010-02-10 14:14 ` Grant Likely
2010-02-10 14:14 ` Grant Likely
[not found] ` <fa686aa41002100614l76bff396ved847c0b0a4c71ff-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-02-10 14:45 ` Wolfgang Grandegger
2010-02-10 14:45 ` Wolfgang Grandegger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B7285D5.9060008@grandegger.com \
--to=wg-5yr1bzd7o62+xt7jha+gda@public.gmane.org \
--cc=Devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=Linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=Linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org \
--cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
--cc=wg-ynQEQJNshbs@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.