From: Roger Quadros <roger.quadros@nokia.com>
To: ext pHilipp Zabel <philipp.zabel@gmail.com>
Cc: "tony@atomide.com" <tony@atomide.com>,
"Valkeinen Tomi (Nokia-D/Helsinki)" <Tomi.Valkeinen@nokia.com>,
"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
"linux-fbdev@vger.kernel.org" <linux-fbdev@vger.kernel.org>
Subject: Re: [PATCH 1/5] OMAP: RX51: Add LCD Panel support
Date: Tue, 23 Mar 2010 11:20:37 +0000 [thread overview]
Message-ID: <4BA8A405.8000307@nokia.com> (raw)
In-Reply-To: <74d0deb31003230312x1b1160b5v75f182fd3db8ac25@mail.gmail.com>
ext pHilipp Zabel wrote:
> On Tue, Mar 23, 2010 at 10:56 AM, Roger Quadros <roger.quadros@nokia.com> wrote:
>> From: Roger Quadros <roger.quadros@nokia.com>
>>
>> Adds basic support for LCD Panel on Nokia N900
>>
>> Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
>> ---
>> arch/arm/mach-omap2/Makefile | 1 +
>> arch/arm/mach-omap2/board-rx51-peripherals.c | 13 ++++
>> arch/arm/mach-omap2/board-rx51-video.c | 95 ++++++++++++++++++++++++++
>> 3 files changed, 109 insertions(+), 0 deletions(-)
>> create mode 100644 arch/arm/mach-omap2/board-rx51-video.c
>>
>> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
>> index 4b9fc57..b03cbb4 100644
>> --- a/arch/arm/mach-omap2/Makefile
>> +++ b/arch/arm/mach-omap2/Makefile
>> @@ -122,6 +122,7 @@ obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
>> obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
>> board-rx51-sdram.o \
>> board-rx51-peripherals.o \
>> + board-rx51-video.o \
>> hsmmc.o
>> obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \
>> board-zoom-peripherals.o \
>> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
>> index 4377a4c..f404537 100644
>> --- a/arch/arm/mach-omap2/board-rx51-peripherals.c
>> +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
>> @@ -45,6 +45,7 @@
>> /* list all spi devices here */
>> enum {
>> RX51_SPI_WL1251,
>> + RX51_SPI_MIPID, /* LCD panel */
>> };
>>
>> static struct wl12xx_platform_data wl1251_pdata;
>> @@ -54,6 +55,11 @@ static struct omap2_mcspi_device_config wl1251_mcspi_config = {
>> .single_channel = 1,
>> };
>>
>> +static struct omap2_mcspi_device_config mipid_mcspi_config = {
>> + .turbo_mode = 0,
>> + .single_channel = 1,
>> +};
>> +
>> static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
>> [RX51_SPI_WL1251] = {
>> .modalias = "wl1251",
>> @@ -64,6 +70,13 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
>> .controller_data = &wl1251_mcspi_config,
>> .platform_data = &wl1251_pdata,
>> },
>> + [RX51_SPI_MIPID] = {
>> + .modalias = "acx565akm",
>> + .bus_num = 1,
>> + .chip_select = 2,
>> + .max_speed_hz = 6000000,
>> + .controller_data = &mipid_mcspi_config,
>> + },
>> };
>>
>> #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
>> diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
>> new file mode 100644
>> index 0000000..e3e22a8
>> --- /dev/null
>> +++ b/arch/arm/mach-omap2/board-rx51-video.c
>> @@ -0,0 +1,95 @@
>> +/*
>> + * linux/arch/arm/mach-omap2/board-rx51-peripherals.c
>
> board-rx51-video.c
>
yup. thanks :P
-roger
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <roger.quadros@nokia.com>
To: ext pHilipp Zabel <philipp.zabel@gmail.com>
Cc: "tony@atomide.com" <tony@atomide.com>,
"Valkeinen Tomi (Nokia-D/Helsinki)" <Tomi.Valkeinen@nokia.com>,
"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
"linux-fbdev@vger.kernel.org" <linux-fbdev@vger.kernel.org>
Subject: Re: [PATCH 1/5] OMAP: RX51: Add LCD Panel support
Date: Tue, 23 Mar 2010 13:20:37 +0200 [thread overview]
Message-ID: <4BA8A405.8000307@nokia.com> (raw)
In-Reply-To: <74d0deb31003230312x1b1160b5v75f182fd3db8ac25@mail.gmail.com>
ext pHilipp Zabel wrote:
> On Tue, Mar 23, 2010 at 10:56 AM, Roger Quadros <roger.quadros@nokia.com> wrote:
>> From: Roger Quadros <roger.quadros@nokia.com>
>>
>> Adds basic support for LCD Panel on Nokia N900
>>
>> Signed-off-by: Roger Quadros <roger.quadros@nokia.com>
>> ---
>> arch/arm/mach-omap2/Makefile | 1 +
>> arch/arm/mach-omap2/board-rx51-peripherals.c | 13 ++++
>> arch/arm/mach-omap2/board-rx51-video.c | 95 ++++++++++++++++++++++++++
>> 3 files changed, 109 insertions(+), 0 deletions(-)
>> create mode 100644 arch/arm/mach-omap2/board-rx51-video.c
>>
>> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
>> index 4b9fc57..b03cbb4 100644
>> --- a/arch/arm/mach-omap2/Makefile
>> +++ b/arch/arm/mach-omap2/Makefile
>> @@ -122,6 +122,7 @@ obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
>> obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
>> board-rx51-sdram.o \
>> board-rx51-peripherals.o \
>> + board-rx51-video.o \
>> hsmmc.o
>> obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \
>> board-zoom-peripherals.o \
>> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
>> index 4377a4c..f404537 100644
>> --- a/arch/arm/mach-omap2/board-rx51-peripherals.c
>> +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
>> @@ -45,6 +45,7 @@
>> /* list all spi devices here */
>> enum {
>> RX51_SPI_WL1251,
>> + RX51_SPI_MIPID, /* LCD panel */
>> };
>>
>> static struct wl12xx_platform_data wl1251_pdata;
>> @@ -54,6 +55,11 @@ static struct omap2_mcspi_device_config wl1251_mcspi_config = {
>> .single_channel = 1,
>> };
>>
>> +static struct omap2_mcspi_device_config mipid_mcspi_config = {
>> + .turbo_mode = 0,
>> + .single_channel = 1,
>> +};
>> +
>> static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
>> [RX51_SPI_WL1251] = {
>> .modalias = "wl1251",
>> @@ -64,6 +70,13 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
>> .controller_data = &wl1251_mcspi_config,
>> .platform_data = &wl1251_pdata,
>> },
>> + [RX51_SPI_MIPID] = {
>> + .modalias = "acx565akm",
>> + .bus_num = 1,
>> + .chip_select = 2,
>> + .max_speed_hz = 6000000,
>> + .controller_data = &mipid_mcspi_config,
>> + },
>> };
>>
>> #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
>> diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
>> new file mode 100644
>> index 0000000..e3e22a8
>> --- /dev/null
>> +++ b/arch/arm/mach-omap2/board-rx51-video.c
>> @@ -0,0 +1,95 @@
>> +/*
>> + * linux/arch/arm/mach-omap2/board-rx51-peripherals.c
>
> board-rx51-video.c
>
yup. thanks :P
-roger
next prev parent reply other threads:[~2010-03-23 11:20 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-23 9:56 [PATCH 0/5] OMAP: RX51: Add LCD Panel Support for N900 Roger Quadros
2010-03-23 9:56 ` Roger Quadros
2010-03-23 9:56 ` [PATCH 1/5] OMAP: RX51: Add LCD Panel support Roger Quadros
2010-03-23 9:56 ` Roger Quadros
2010-03-23 9:56 ` [PATCH 2/5] OMAP: RX51: Add "vdds_sdi" supply voltage for SDI Roger Quadros
2010-03-23 9:56 ` Roger Quadros
2010-03-23 9:56 ` [PATCH 3/5] OMAP: RX51: Add Touch Controller in SPI board info Roger Quadros
2010-03-23 9:56 ` Roger Quadros
2010-03-23 9:56 ` [PATCH 4/5] OMAP: DSS2: Add ACX565AKM Panel Driver Roger Quadros
2010-03-23 9:56 ` Roger Quadros
2010-03-23 9:56 ` [PATCH 5/5] OMAP: RX51: Add LCD Panel and framebuffer console to defconfig Roger Quadros
2010-03-23 9:56 ` Roger Quadros
2010-03-23 10:12 ` [PATCH 1/5] OMAP: RX51: Add LCD Panel support pHilipp Zabel
2010-03-23 10:12 ` pHilipp Zabel
2010-03-23 11:20 ` Roger Quadros [this message]
2010-03-23 11:20 ` Roger Quadros
2010-03-23 13:48 ` G, Manjunath Kondaiah
2010-03-23 13:48 ` G, Manjunath Kondaiah
2010-03-23 13:55 ` Roger Quadros
2010-03-23 13:55 ` Roger Quadros
2010-03-23 13:55 ` Roger Quadros
2010-03-23 13:55 ` Roger Quadros
2010-04-06 8:14 ` [PATCH 0/5] OMAP: RX51: Add LCD Panel Support for N900 Arnaud Ebalard
2010-04-06 8:14 ` Arnaud Ebalard
2010-04-06 9:50 ` Roger Quadros
2010-04-06 9:50 ` Roger Quadros
2010-04-06 20:41 ` Arnaud Ebalard
2010-04-06 20:41 ` Arnaud Ebalard
2010-04-07 5:38 ` Tomi Valkeinen
2010-04-07 5:38 ` Tomi Valkeinen
2010-04-07 7:35 ` Arnaud Ebalard
2010-04-07 7:35 ` Arnaud Ebalard
2010-04-07 7:38 ` Roger Quadros
2010-04-07 7:38 ` Roger Quadros
2010-04-07 8:45 ` Arnaud Ebalard
2010-04-07 8:45 ` Arnaud Ebalard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BA8A405.8000307@nokia.com \
--to=roger.quadros@nokia.com \
--cc=Tomi.Valkeinen@nokia.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=philipp.zabel@gmail.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.