From: arno@natisbad.org (Arnaud Ebalard)
To: Roger Quadros <roger.quadros@nokia.com>
Cc: tony@atomide.com, Tomi.Valkeinen@nokia.com,
linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org
Subject: Re: [PATCH 0/5] OMAP: RX51: Add LCD Panel Support for N900
Date: Tue, 06 Apr 2010 08:14:46 +0000 [thread overview]
Message-ID: <87pr2datft.fsf@small.ssi.corp> (raw)
In-Reply-To: 1269338191-10734-1-git-send-email-roger.quadros@nokia.com
Hi Roger,
Roger Quadros <roger.quadros@nokia.com> writes:
> These patches get the N900 LCD panel working.
> Apply's cleanly on 2.6.34-rc2
>
> Pre-requisites:
> https://patchwork.kernel.org/patch/86318/
> https://patchwork.kernel.org/patch/86319/
> https://patchwork.kernel.org/patch/86320/
First, thanks for pushing the missing bits for N900 hardware support
upstream! I wanted to give your patches a try and test a l-o kernel on
my N900 (I know I won't have full hardware support ... at the moment).
Using current l-o tree with your 5 panel patches and the 3 you link on
patchwork, I initially ended up with a kernel panic in
omap3_onenand_write_bufferram() (i.e. unrelated to your patches).
With http://patchwork.ozlabs.org/patch/48337/ (mtd: OneNAND: OMAP3:
unmap correct DMA buffer), I am able to get the official Nokia
/sbin/preinit called: then, getbootstate reports a malfunction but
AFAICT, the panel is working ok.
If there are additional patches I should be aware of regarding N900
support, I am also interested.
Cheers,
a+
WARNING: multiple messages have this Message-ID (diff)
From: arno@natisbad.org (Arnaud Ebalard)
To: Roger Quadros <roger.quadros@nokia.com>
Cc: tony@atomide.com, Tomi.Valkeinen@nokia.com,
linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org
Subject: Re: [PATCH 0/5] OMAP: RX51: Add LCD Panel Support for N900
Date: Tue, 06 Apr 2010 10:14:46 +0200 [thread overview]
Message-ID: <87pr2datft.fsf@small.ssi.corp> (raw)
In-Reply-To: 1269338191-10734-1-git-send-email-roger.quadros@nokia.com
Hi Roger,
Roger Quadros <roger.quadros@nokia.com> writes:
> These patches get the N900 LCD panel working.
> Apply's cleanly on 2.6.34-rc2
>
> Pre-requisites:
> https://patchwork.kernel.org/patch/86318/
> https://patchwork.kernel.org/patch/86319/
> https://patchwork.kernel.org/patch/86320/
First, thanks for pushing the missing bits for N900 hardware support
upstream! I wanted to give your patches a try and test a l-o kernel on
my N900 (I know I won't have full hardware support ... at the moment).
Using current l-o tree with your 5 panel patches and the 3 you link on
patchwork, I initially ended up with a kernel panic in
omap3_onenand_write_bufferram() (i.e. unrelated to your patches).
With http://patchwork.ozlabs.org/patch/48337/ (mtd: OneNAND: OMAP3:
unmap correct DMA buffer), I am able to get the official Nokia
/sbin/preinit called: then, getbootstate reports a malfunction but
AFAICT, the panel is working ok.
If there are additional patches I should be aware of regarding N900
support, I am also interested.
Cheers,
a+
next prev parent reply other threads:[~2010-04-06 8:14 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-23 9:56 [PATCH 0/5] OMAP: RX51: Add LCD Panel Support for N900 Roger Quadros
2010-03-23 9:56 ` Roger Quadros
2010-03-23 9:56 ` [PATCH 1/5] OMAP: RX51: Add LCD Panel support Roger Quadros
2010-03-23 9:56 ` Roger Quadros
2010-03-23 9:56 ` [PATCH 2/5] OMAP: RX51: Add "vdds_sdi" supply voltage for SDI Roger Quadros
2010-03-23 9:56 ` Roger Quadros
2010-03-23 9:56 ` [PATCH 3/5] OMAP: RX51: Add Touch Controller in SPI board info Roger Quadros
2010-03-23 9:56 ` Roger Quadros
2010-03-23 9:56 ` [PATCH 4/5] OMAP: DSS2: Add ACX565AKM Panel Driver Roger Quadros
2010-03-23 9:56 ` Roger Quadros
2010-03-23 9:56 ` [PATCH 5/5] OMAP: RX51: Add LCD Panel and framebuffer console to defconfig Roger Quadros
2010-03-23 9:56 ` Roger Quadros
2010-03-23 10:12 ` [PATCH 1/5] OMAP: RX51: Add LCD Panel support pHilipp Zabel
2010-03-23 10:12 ` pHilipp Zabel
2010-03-23 11:20 ` Roger Quadros
2010-03-23 11:20 ` Roger Quadros
2010-03-23 13:48 ` G, Manjunath Kondaiah
2010-03-23 13:48 ` G, Manjunath Kondaiah
2010-03-23 13:55 ` Roger Quadros
2010-03-23 13:55 ` Roger Quadros
2010-03-23 13:55 ` Roger Quadros
2010-03-23 13:55 ` Roger Quadros
2010-04-06 8:14 ` Arnaud Ebalard [this message]
2010-04-06 8:14 ` [PATCH 0/5] OMAP: RX51: Add LCD Panel Support for N900 Arnaud Ebalard
2010-04-06 9:50 ` Roger Quadros
2010-04-06 9:50 ` Roger Quadros
2010-04-06 20:41 ` Arnaud Ebalard
2010-04-06 20:41 ` Arnaud Ebalard
2010-04-07 5:38 ` Tomi Valkeinen
2010-04-07 5:38 ` Tomi Valkeinen
2010-04-07 7:35 ` Arnaud Ebalard
2010-04-07 7:35 ` Arnaud Ebalard
2010-04-07 7:38 ` Roger Quadros
2010-04-07 7:38 ` Roger Quadros
2010-04-07 8:45 ` Arnaud Ebalard
2010-04-07 8:45 ` Arnaud Ebalard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87pr2datft.fsf@small.ssi.corp \
--to=arno@natisbad.org \
--cc=Tomi.Valkeinen@nokia.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=roger.quadros@nokia.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.