Blank screen at startup (conflict with VESA VGA)

Blank screen at startup (conflict with VESA VGA)

[Didier Spaier]

Hi all,

new to this list ;)

I have a Lenovo Thinkpad T61. lspci|grep VGA says:
01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 140M (rev a1)

I have Slacware64-13.0 and Slackware64-current installed.

Nouveau is modularized in all my kernels for -current.

A problem arise even if I don't want to use nouveau under X: unless nouveau be blacklisted in /etc/modprobe.d/blacklist.conf at startup,
- when using one of the VESA modes at startup after a while screen goes blank and I get a warning in syslog e.g:
   Apr  2 18:58:56 darkstar kernel: fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver,
- no problem when using a VGA mode (text only),

this disregarding which X driver I use afterwards (I always start in console mode).

But according to this page:
http://nouveau.freedesktop.org/wiki/KernelModeSetting
I thought nouveaufb shouldn't conflict with vesafb ? Am I wrong ?

I tried with modules shipped in vanilla 2.6.33.1 as well as the last Nouveau kernel repository pulled from git: no luck in both cases.

I know there are easy workarounds: either use "VGA=ask", "VGA=ext" or "VGA=normal" as a lilo.conf option or blacklist nouveau -- which doesn't hurt anyway as nouveau will be loaded at X startup anyhow.

But this is still is an annoyance for newcomers as when they are trapped all they can do if they have a VESA mode in lilo.conf is launch another system or live CD/DVD and either edit lilo.conf and run lilo again or edit blacklist.conf to blacklist nouveau.

But still, before kindly requesting Patrick Volkerding to blacklist nouveau in -current for the time being, I wanted to now of another way to go if possible.

Thanks in advance for your answers,

Didier

Re: Blank screen at startup (conflict with VESA VGA)

[Marcin Slusarz]

On Mon, Apr 05, 2010 at 10:59:40PM +0200, Didier Spaier wrote:
> Hi all,
> 
> new to this list ;)
> 
> I have a Lenovo Thinkpad T61. lspci|grep VGA says:
> 01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 140M (rev a1)
> 
> I have Slacware64-13.0 and Slackware64-current installed.
> 
> Nouveau is modularized in all my kernels for -current.
> 
> A problem arise even if I don't want to use nouveau under X: unless nouveau be blacklisted in /etc/modprobe.d/blacklist.conf at startup,
> - when using one of the VESA modes at startup after a while screen goes blank and I get a warning in syslog e.g:
>    Apr  2 18:58:56 darkstar kernel: fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver,

It should work. Please provide full kernel log.

> - no problem when using a VGA mode (text only),

But Nouveau framebuffer activates without errors, right?

> 
> this disregarding which X driver I use afterwards (I always start in console mode).
> 
> But according to this page:
> http://nouveau.freedesktop.org/wiki/KernelModeSetting
> I thought nouveaufb shouldn't conflict with vesafb ? Am I wrong ?
> 
> I tried with modules shipped in vanilla 2.6.33.1 as well as the last Nouveau kernel repository pulled from git: no luck in both cases.
> 
> I know there are easy workarounds: either use "VGA=ask", "VGA=ext" or "VGA=normal" as a lilo.conf option or blacklist nouveau -- which doesn't hurt anyway as nouveau will be loaded at X startup anyhow.
> 
> But this is still is an annoyance for newcomers as when they are trapped all they can do if they have a VESA mode in lilo.conf is launch another system or live CD/DVD and either edit lilo.conf and run lilo again or edit blacklist.conf to blacklist nouveau.
> 
> But still, before kindly requesting Patrick Volkerding to blacklist nouveau in -current for the time being, I wanted to now of another way to go if possible.
> 
> Thanks in advance for your answers,
> 
> Didier

Re: Blank screen at startup (conflict with VESA VGA)

[Didier Spaier]

Thansk for your answer, kernel logs are attached.

Please note that this time I tried with a 2.6.32.2 kernel (nouveau works under X).

Marcin Slusarz wrote:
> On Mon, Apr 05, 2010 at 10:59:40PM +0200, Didier Spaier wrote:
>> Hi all,
>>
>> new to this list ;)
>>
>> I have a Lenovo Thinkpad T61. lspci|grep VGA says:
>> 01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 140M (rev a1)
>>
>> I have Slacware64-13.0 and Slackware64-current installed.
>>
>> Nouveau is modularized in all my kernels for -current.
>>
>> A problem arise even if I don't want to use nouveau under X: unless nouveau be blacklisted in /etc/modprobe.d/blacklist.conf at startup,
>> - when using one of the VESA modes at startup after a while screen goes blank and I get a warning in syslog e.g:
>>    Apr  2 18:58:56 darkstar kernel: fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver,
> 
> It should work. Please provide full kernel log.

Kernel logs are attached for both cases. Unfortunately I don't see many differences ??

> 
>> - no problem when using a VGA mode (text only),
> 
> But Nouveau framebuffer activates without errors, right?
> 
Yes, switching to nouveau framebuffer OK in the latter case but not in the former

>> this disregarding which X driver I use afterwards (I always start in console mode).
>>
>> But according to this page:
>> http://nouveau.freedesktop.org/wiki/KernelModeSetting
>> I thought nouveaufb shouldn't conflict with vesafb ? Am I wrong ?
>>
>> I tried with modules shipped in vanilla 2.6.33.1 as well as the last Nouveau kernel repository pulled from git: no luck in both cases.
>>
>> I know there are easy workarounds: either use "VGA=ask", "VGA=ext" or "VGA=normal" as a lilo.conf option or blacklist nouveau -- which doesn't hurt anyway as nouveau will be loaded at X startup anyhow.
>>
>> But this is still is an annoyance for newcomers as when they are trapped all they can do if they have a VESA mode in lilo.conf is launch another system or live CD/DVD and either edit lilo.conf and run lilo again or edit blacklist.conf to blacklist nouveau.
>>
>> But still, before kindly requesting Patrick Volkerding to blacklist nouveau in -current for the time being, I wanted to now of another way to go if possible.
>>
>> Thanks in advance for your answers,
>>
>> Didier
> 

Re: Blank screen at startup (conflict with VESA VGA)

[Didier Spaier]

[-- Attachment #1: Type: text/plain, Size: 2954 bytes --]

With the logs, this time. Sorry about that.

Didier Spaier wrote:
> Thansk for your answer, kernel logs are attached.
> 
> Please note that this time I tried with a 2.6.32.2 kernel (nouveau works 
> under X).
> 
> Marcin Slusarz wrote:
>> On Mon, Apr 05, 2010 at 10:59:40PM +0200, Didier Spaier wrote:
>>> Hi all,
>>>
>>> new to this list ;)
>>>
>>> I have a Lenovo Thinkpad T61. lspci|grep VGA says:
>>> 01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 140M 
>>> (rev a1)
>>>
>>> I have Slacware64-13.0 and Slackware64-current installed.
>>>
>>> Nouveau is modularized in all my kernels for -current.
>>>
>>> A problem arise even if I don't want to use nouveau under X: unless 
>>> nouveau be blacklisted in /etc/modprobe.d/blacklist.conf at startup,
>>> - when using one of the VESA modes at startup after a while screen 
>>> goes blank and I get a warning in syslog e.g:
>>>    Apr  2 18:58:56 darkstar kernel: fb: conflicting fb hw usage 
>>> nouveaufb vs VESA VGA - removing generic driver,
>>
>> It should work. Please provide full kernel log.
> 
> Kernel logs are attached for both cases. Unfortunately I don't see many 
> differences ??
> 
>>
>>> - no problem when using a VGA mode (text only),
>>
>> But Nouveau framebuffer activates without errors, right?
>>
> Yes, switching to nouveau framebuffer OK in the latter case but not in 
> the former
> 
>>> this disregarding which X driver I use afterwards (I always start in 
>>> console mode).
>>>
>>> But according to this page:
>>> http://nouveau.freedesktop.org/wiki/KernelModeSetting
>>> I thought nouveaufb shouldn't conflict with vesafb ? Am I wrong ?
>>>
>>> I tried with modules shipped in vanilla 2.6.33.1 as well as the last 
>>> Nouveau kernel repository pulled from git: no luck in both cases.
>>>
>>> I know there are easy workarounds: either use "VGA=ask", "VGA=ext" or 
>>> "VGA=normal" as a lilo.conf option or blacklist nouveau -- which 
>>> doesn't hurt anyway as nouveau will be loaded at X startup anyhow.
>>>
>>> But this is still is an annoyance for newcomers as when they are 
>>> trapped all they can do if they have a VESA mode in lilo.conf is 
>>> launch another system or live CD/DVD and either edit lilo.conf and 
>>> run lilo again or edit blacklist.conf to blacklist nouveau.
>>>
>>> But still, before kindly requesting Patrick Volkerding to blacklist 
>>> nouveau in -current for the time being, I wanted to now of another 
>>> way to go if possible.
>>>
>>> Thanks in advance for your answers,
>>>
>>> Didier
>>
> _______________________________________________
> Nouveau mailing list
> Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
> http://lists.freedesktop.org/mailman/listinfo/nouveau
> 


-- 
Didier Spaier
Gérant
EPSM
33 avenue Bosquet
75007 PARIS
T. 01 45 51 03 26 | M. 06 64 98 45 51
didier.spaier-GqzDj6/B2j8@public.gmane.org | http://epsm.fr

[-- Attachment #2: messages --]
[-- Type: text/plain, Size: 82438 bytes --]



-----------------Starting with VESA framebuffer console 1680x1050-----------------------------
Apr  6 09:02:50 machine syslogd 1.4.1: restart.
Apr  6 09:02:50 machine kernel: klogd 1.4.1, log source = /proc/kmsg started.
Apr  6 09:02:50 machine kernel: etting latency timer to 64
Apr  6 09:02:50 machine kernel: pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
Apr  6 09:02:50 machine kernel: pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr  6 09:02:50 machine kernel: pci 0000:00:1e.0: enabling device (0005 -> 0007)
Apr  6 09:02:50 machine kernel: pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:02:50 machine kernel: NET: Registered protocol family 2
Apr  6 09:02:50 machine kernel: IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Apr  6 09:02:50 machine kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Apr  6 09:02:50 machine kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Apr  6 09:02:50 machine kernel: TCP: Hash tables configured (established 262144 bind 65536)
Apr  6 09:02:50 machine kernel: TCP reno registered
Apr  6 09:02:50 machine kernel: NET: Registered protocol family 1
Apr  6 09:02:50 machine kernel: Simple Boot Flag at 0x35 set to 0x1
Apr  6 09:02:50 machine kernel: Intel AES-NI instructions are not detected.
Apr  6 09:02:50 machine kernel: VFS: Disk quotas dquot_6.5.2
Apr  6 09:02:50 machine kernel: ROMFS MTD (C) 2007 Red Hat, Inc.
Apr  6 09:02:50 machine kernel: msgmni has been set to 5997
Apr  6 09:02:50 machine kernel: alg: No test for cipher_null (cipher_null-generic)
Apr  6 09:02:50 machine kernel: alg: No test for ecb(cipher_null) (ecb-cipher_null)
Apr  6 09:02:50 machine kernel: alg: No test for digest_null (digest_null-generic)
Apr  6 09:02:50 machine kernel: alg: No test for compress_null (compress_null-generic)
Apr  6 09:02:50 machine kernel: alg: No test for fcrypt (fcrypt-generic)
Apr  6 09:02:50 machine kernel: alg: No test for stdrng (krng)
Apr  6 09:02:50 machine kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Apr  6 09:02:50 machine kernel: io scheduler noop registered
Apr  6 09:02:50 machine kernel: io scheduler anticipatory registered
Apr  6 09:02:50 machine kernel: io scheduler deadline registered
Apr  6 09:02:50 machine kernel: io scheduler cfq registered (default)
Apr  6 09:02:50 machine kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Apr  6 09:02:50 machine kernel: vesafb: framebuffer at 0xd5000000, mapped to 0xffffc90004100000, using 13781k, total 14336k
Apr  6 09:02:50 machine kernel: vesafb: mode is 1680x1050x32, linelength=6720, pages=1
Apr  6 09:02:50 machine kernel: vesafb: scrolling: redraw
Apr  6 09:02:50 machine kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Apr  6 09:02:50 machine kernel: fb0: VESA VGA frame buffer device
Apr  6 09:02:50 machine kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Apr  6 09:02:50 machine kernel: brd: module loaded
Apr  6 09:02:50 machine kernel: loop: module loaded
Apr  6 09:02:50 machine kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input0
Apr  6 09:02:50 machine kernel: ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:02:50 machine kernel: ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
Apr  6 09:02:50 machine kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 
Apr  6 09:02:50 machine kernel: scsi0 : ahci
Apr  6 09:02:50 machine kernel: scsi1 : ahci
Apr  6 09:02:50 machine kernel: scsi2 : ahci
Apr  6 09:02:50 machine kernel: ata1: SATA max UDMA/133 irq_stat 0x00400040 irq 30, connection status changed
Apr  6 09:02:50 machine kernel: ata2: DUMMY
Apr  6 09:02:50 machine kernel: ata3: DUMMY
Apr  6 09:02:50 machine kernel: ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:02:50 machine kernel: scsi3 : ata_piix
Apr  6 09:02:50 machine kernel: scsi4 : ata_piix
Apr  6 09:02:50 machine kernel: ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
Apr  6 09:02:50 machine kernel: ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
Apr  6 09:02:50 machine kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
Apr  6 09:02:50 machine kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Apr  6 09:02:50 machine kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Apr  6 09:02:50 machine kernel: mice: PS/2 mouse device common for all mice
Apr  6 09:02:50 machine kernel: md: linear personality registered for level -1
Apr  6 09:02:50 machine kernel: md: raid0 personality registered for level 0
Apr  6 09:02:50 machine kernel: md: raid1 personality registered for level 1
Apr  6 09:02:50 machine kernel: md: raid10 personality registered for level 10
Apr  6 09:02:50 machine kernel: md: raid6 personality registered for level 6
Apr  6 09:02:50 machine kernel: md: raid5 personality registered for level 5
Apr  6 09:02:50 machine kernel: md: raid4 personality registered for level 4
Apr  6 09:02:50 machine kernel: md: multipath personality registered for level -4
Apr  6 09:02:50 machine kernel: device-mapper: uevent: version 1.0.3
Apr  6 09:02:50 machine kernel: device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Apr  6 09:02:50 machine kernel: cpuidle: using governor ladder
Apr  6 09:02:50 machine kernel: cpuidle: using governor menu
Apr  6 09:02:50 machine kernel: TCP cubic registered
Apr  6 09:02:50 machine kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Apr  6 09:02:50 machine kernel: NET: Registered protocol family 17
Apr  6 09:02:50 machine kernel: ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-U10N, 1.05, max UDMA/33
Apr  6 09:02:50 machine kernel: ata4.00: configured for UDMA/33
Apr  6 09:02:50 machine kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr  6 09:02:50 machine kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Apr  6 09:02:50 machine kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Apr  6 09:02:50 machine kernel: ata1.00: ATA-8: HITACHI HTS543216L9SA00, FB2ZC4EC, max UDMA/100
Apr  6 09:02:50 machine kernel: ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Apr  6 09:02:50 machine kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Apr  6 09:02:50 machine kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Apr  6 09:02:50 machine kernel: ata1.00: configured for UDMA/100
Apr  6 09:02:50 machine kernel: ata1.00: configured for UDMA/100
Apr  6 09:02:50 machine kernel: ata1: EH complete
Apr  6 09:02:50 machine kernel: scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS54321 FB2Z PQ: 0 ANSI: 5
Apr  6 09:02:50 machine kernel: sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Apr  6 09:02:50 machine kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr  6 09:02:50 machine kernel: scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-U10N  1.05 PQ: 0 ANSI: 5
Apr  6 09:02:50 machine kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr  6 09:02:50 machine kernel:  sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Apr  6 09:02:50 machine kernel: Uniform CD-ROM driver Revision: 3.20
Apr  6 09:02:50 machine kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Apr  6 09:02:50 machine kernel: md: Waiting for all devices to be available before autodetect
Apr  6 09:02:50 machine kernel: md: If you don't use raid, use raid=noautodetect
Apr  6 09:02:50 machine kernel: md: Autodetecting RAID arrays.
Apr  6 09:02:50 machine kernel: md: Scanned 0 and added 0 devices.
Apr  6 09:02:50 machine kernel: md: autorun ...
Apr  6 09:02:50 machine kernel: md: ... autorun DONE.
Apr  6 09:02:50 machine kernel: REISERFS (device sda4): found reiserfs format "3.6" with standard journal
Apr  6 09:02:50 machine kernel: REISERFS (device sda4): using ordered data mode
Apr  6 09:02:50 machine kernel: REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Apr  6 09:02:50 machine kernel: REISERFS (device sda4): checking transaction log (sda4)
Apr  6 09:02:50 machine kernel: REISERFS (device sda4): Using r5 hash to sort names
Apr  6 09:02:50 machine kernel: devtmpfs: mounted
Apr  6 09:02:50 machine kernel: Freeing unused kernel memory: 576k freed
Apr  6 09:02:50 machine kernel: cfg80211: Using static regulatory domain info
Apr  6 09:02:50 machine kernel: cfg80211: Regulatory domain: US
Apr  6 09:02:50 machine kernel: ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr  6 09:02:50 machine kernel: ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
Apr  6 09:02:50 machine kernel: HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr  6 09:02:50 machine kernel: hda_intel: probe_mask set to 0x1 for device 17aa:20ac
Apr  6 09:02:50 machine kernel: ^I(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Apr  6 09:02:50 machine kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
Apr  6 09:02:50 machine kernel: ACPI: AC Adapter [AC] (on-line)
Apr  6 09:02:50 machine kernel: ^I(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Apr  6 09:02:50 machine kernel: ^I(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Apr  6 09:02:50 machine kernel: ^I(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Apr  6 09:02:50 machine kernel: ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
Apr  6 09:02:50 machine kernel: cfg80211: Calling CRDA for country: US
Apr  6 09:02:50 machine kernel: ACPI: Battery Slot [BAT0] (battery present)
Apr  6 09:02:50 machine kernel: ACPI: Lid Switch [LID]
Apr  6 09:02:50 machine kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
Apr  6 09:02:50 machine kernel: ACPI: Sleep Button [SLPB]
Apr  6 09:02:50 machine kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
Apr  6 09:02:50 machine kernel: ACPI: Power Button [PWRF]
Apr  6 09:02:50 machine kernel: e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
Apr  6 09:02:50 machine kernel: e1000e: Copyright (c) 1999-2008 Intel Corporation.
Apr  6 09:02:50 machine kernel: ACPI: WMI: Mapper loaded
Apr  6 09:02:50 machine kernel: acpi device:05: registered as cooling_device0
Apr  6 09:02:50 machine kernel: ricoh-mmc: Ricoh MMC Controller disabling driver
Apr  6 09:02:50 machine kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input5
Apr  6 09:02:50 machine kernel: ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
Apr  6 09:02:50 machine kernel: ricoh-mmc: Copyright(c) Philip Langdale
Apr  6 09:02:50 machine kernel: ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11)
Apr  6 09:02:50 machine kernel: ricoh-mmc: Controller is now disabled.
Apr  6 09:02:50 machine kernel: yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
Apr  6 09:02:50 machine kernel: Non-volatile memory driver v1.3
Apr  6 09:02:50 machine kernel: yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
Apr  6 09:02:50 machine kernel: yenta_cardbus 0000:15:00.0: Socket status: 30000006
Apr  6 09:02:50 machine kernel: yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff
Apr  6 09:02:50 machine kernel: yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff
Apr  6 09:02:50 machine kernel: yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
Apr  6 09:02:50 machine kernel: rtc_cmos 00:07: RTC can wake from S4
Apr  6 09:02:50 machine kernel: rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
Apr  6 09:02:50 machine kernel: ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr  6 09:02:50 machine kernel: rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Apr  6 09:02:50 machine kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[f8101000-f81017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
Apr  6 09:02:50 machine kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Apr  6 09:02:50 machine kernel: sr 3:0:0:0: Attached scsi generic sg1 type 5
Apr  6 09:02:50 machine kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Apr  6 09:02:50 machine kernel: Linux agpgart interface v0.103
Apr  6 09:02:50 machine kernel: thermal LNXTHERM:01: registered as thermal_zone0
Apr  6 09:02:50 machine kernel: ACPI: Thermal Zone [THM0] (58 C)
Apr  6 09:02:50 machine kernel: thermal LNXTHERM:02: registered as thermal_zone1
Apr  6 09:02:50 machine kernel: ACPI: Thermal Zone [THM1] (57 C)
Apr  6 09:02:50 machine kernel: thinkpad_acpi: ThinkPad ACPI Extras v0.23
Apr  6 09:02:50 machine kernel: thinkpad_acpi: http://ibm-acpi.sf.net/
Apr  6 09:02:50 machine kernel: thinkpad_acpi: ThinkPad BIOS 7LETC5WW (2.25 ), EC 7KHT24WW-1.08
Apr  6 09:02:50 machine kernel: thinkpad_acpi: Lenovo ThinkPad T61, model 64574XG
Apr  6 09:02:50 machine kernel: thinkpad_acpi: ACPI backlight control delay disabled
Apr  6 09:02:50 machine kernel: thinkpad_acpi: radio switch found; radios are disabled
Apr  6 09:02:50 machine kernel: thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
Apr  6 09:02:50 machine kernel: thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
Apr  6 09:02:50 machine kernel: processor LNXCPU:00: registered as cooling_device1
Apr  6 09:02:50 machine kernel: Registered led device: tpacpi::thinklight
Apr  6 09:02:50 machine kernel: Registered led device: tpacpi::power
Apr  6 09:02:50 machine kernel: Registered led device: tpacpi::standby
Apr  6 09:02:50 machine kernel: processor LNXCPU:01: registered as cooling_device2
Apr  6 09:02:50 machine kernel: uhci_hcd: USB Universal Host Controller Interface driver
Apr  6 09:02:50 machine kernel: Registered led device: tpacpi::thinkvantage
Apr  6 09:02:50 machine kernel: sdhci: Secure Digital Host Controller Interface driver
Apr  6 09:02:50 machine kernel: sdhci: Copyright(c) Pierre Ossman
Apr  6 09:02:50 machine kernel: thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
Apr  6 09:02:50 machine kernel: input: ThinkPad Extra Buttons as /devices/virtual/input/input6
Apr  6 09:02:50 machine kernel: e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr  6 09:02:50 machine kernel: sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
Apr  6 09:02:50 machine kernel: sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr  6 09:02:50 machine kernel: Registered led device: mmc0::
Apr  6 09:02:50 machine kernel: mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
Apr  6 09:02:50 machine kernel: 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:e2:1a:ea:c0
Apr  6 09:02:50 machine kernel: 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
Apr  6 09:02:50 machine kernel: 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1008ff-0ff
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Apr  6 09:02:50 machine kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Apr  6 09:02:50 machine kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:02:50 machine kernel: usb usb1: Product: EHCI Host Controller
Apr  6 09:02:50 machine kernel: usb usb1: Manufacturer: Linux 2.6.32.2-strip ehci_hcd
Apr  6 09:02:50 machine kernel: usb usb1: SerialNumber: 0000:00:1a.7
Apr  6 09:02:50 machine kernel: usb usb1: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: hub 1-0:1.0: USB hub found
Apr  6 09:02:50 machine kernel: hub 1-0:1.0: 4 ports detected
Apr  6 09:02:50 machine kernel: i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Apr  6 09:02:50 machine kernel: [drm] Initialized drm 1.1.0 20060810
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
Apr  6 09:02:50 machine kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:02:50 machine kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:02:50 machine kernel: usb usb2: Product: UHCI Host Controller
Apr  6 09:02:50 machine kernel: usb usb2: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:02:50 machine kernel: usb usb2: SerialNumber: 0000:00:1a.0
Apr  6 09:02:50 machine kernel: usb usb2: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: hub 2-0:1.0: USB hub found
Apr  6 09:02:50 machine kernel: hub 2-0:1.0: 2 ports detected
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1d.7: debug port 1
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Apr  6 09:02:50 machine kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
Apr  6 09:02:50 machine kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:02:50 machine kernel: usb usb3: Product: EHCI Host Controller
Apr  6 09:02:50 machine kernel: usb usb3: Manufacturer: Linux 2.6.32.2-strip ehci_hcd
Apr  6 09:02:50 machine kernel: usb usb3: SerialNumber: 0000:00:1d.7
Apr  6 09:02:50 machine kernel: usb usb3: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: hub 3-0:1.0: USB hub found
Apr  6 09:02:50 machine kernel: hub 3-0:1.0: 6 ports detected
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
Apr  6 09:02:50 machine kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:02:50 machine kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:02:50 machine kernel: usb usb4: Product: UHCI Host Controller
Apr  6 09:02:50 machine kernel: usb usb4: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:02:50 machine kernel: usb usb4: SerialNumber: 0000:00:1a.1
Apr  6 09:02:50 machine kernel: usb usb4: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: hub 4-0:1.0: USB hub found
Apr  6 09:02:50 machine kernel: hub 4-0:1.0: 2 ports detected
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
Apr  6 09:02:50 machine kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:02:50 machine kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:02:50 machine kernel: usb usb5: Product: UHCI Host Controller
Apr  6 09:02:50 machine kernel: usb usb5: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:02:50 machine kernel: usb usb5: SerialNumber: 0000:00:1d.0
Apr  6 09:02:50 machine kernel: usb usb5: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: hub 5-0:1.0: USB hub found
Apr  6 09:02:50 machine kernel: hub 5-0:1.0: 2 ports detected
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
Apr  6 09:02:50 machine kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:02:50 machine kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:02:50 machine kernel: usb usb6: Product: UHCI Host Controller
Apr  6 09:02:50 machine kernel: usb usb6: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:02:50 machine kernel: usb usb6: SerialNumber: 0000:00:1d.1
Apr  6 09:02:50 machine kernel: usb usb6: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: hub 6-0:1.0: USB hub found
Apr  6 09:02:50 machine kernel: hub 6-0:1.0: 2 ports detected
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
Apr  6 09:02:50 machine kernel: usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:02:50 machine kernel: usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:02:50 machine kernel: usb usb7: Product: UHCI Host Controller
Apr  6 09:02:50 machine kernel: usb usb7: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:02:50 machine kernel: usb usb7: SerialNumber: 0000:00:1d.2
Apr  6 09:02:50 machine kernel: usb usb7: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: hub 7-0:1.0: USB hub found
Apr  6 09:02:50 machine kernel: hub 7-0:1.0: 2 ports detected
Apr  6 09:02:50 machine kernel: iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
Apr  6 09:02:50 machine kernel: iwlagn: Copyright(c) 2003-2009 Intel Corporation
Apr  6 09:02:50 machine kernel: iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Apr  6 09:02:50 machine kernel: iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
Apr  6 09:02:50 machine kernel: iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
Apr  6 09:02:50 machine kernel: cfg80211: Regulatory domain changed to country: US
Apr  6 09:02:50 machine kernel: ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr  6 09:02:50 machine kernel: ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Apr  6 09:02:50 machine kernel: ^I(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Apr  6 09:02:50 machine kernel: ^I(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr  6 09:02:50 machine kernel: ^I(5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr  6 09:02:50 machine kernel: ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Apr  6 09:02:50 machine kernel: usb 2-2: new full speed USB device using uhci_hcd and address 2
Apr  6 09:02:50 machine kernel: usb 2-2: New USB device found, idVendor=0483, idProduct=2016
Apr  6 09:02:50 machine kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Apr  6 09:02:50 machine kernel: usb 2-2: Product: Biometric Coprocessor
Apr  6 09:02:50 machine kernel: usb 2-2: Manufacturer: STMicroelectronics
Apr  6 09:02:50 machine kernel: usb 2-2: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: usb 3-2: new high speed USB device using ehci_hcd and address 2
Apr  6 09:02:50 machine kernel: nouveau 0000:01:00.0: power state changed by ACPI to D0
Apr  6 09:02:50 machine kernel: nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086900a2)
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
Apr  6 09:02:50 machine kernel: usb 3-2: New USB device found, idVendor=03f0, idProduct=1812
Apr  6 09:02:50 machine kernel: usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr  6 09:02:50 machine kernel: usb 3-2: Product: Officejet Pro K550
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: ... appears to be valid
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: BIT BIOS found
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Bios version 60.86.3e.00
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: BIT table 'd' not found
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0:   0: 0x00000040: type 0x40 idx 0 tag 0xff
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0:   2: 0x00001231: type 0x31 idx 2 tag 0x07
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0:   3: 0x00000311: type 0x11 idx 3 tag 0xff
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02811300 00000028
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02822312 00010030
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 014333f1 0080c080
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 0000000e 00000000
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDD0F
Apr  6 09:02:50 machine kernel: usb 3-2: Manufacturer: HP
Apr  6 09:02:50 machine kernel: usb 3-2: SerialNumber: MY5AL2105T
Apr  6 09:02:50 machine kernel: usb 3-2: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE04F
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEAA4
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEB96
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xED83
Apr  6 09:02:50 machine kernel: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1812
Apr  6 09:02:50 machine kernel: usbcore: registered new interface driver usblp
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEDE8
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: 0xCE7E: parsing output script 0
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: 0xCFF4: parsing output script 0
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: 0xC66A: parsing output script 0
Apr  6 09:02:50 machine kernel: usb 4-1: new low speed USB device using uhci_hcd and address 2
Apr  6 09:02:50 machine kernel: [TTM] Zone  kernel: Available graphics memory: 1535528 kiB.
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: 128 MiB VRAM
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
Apr  6 09:02:50 machine kernel: nouveau 0000:01:00.0: firmware: requesting nouveau/nv86.ctxprog
Apr  6 09:02:50 machine kernel: usb 4-1: New USB device found, idVendor=0461, idProduct=4d62
Apr  6 09:02:50 machine kernel: usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr  6 09:02:50 machine kernel: usb 4-1: Product: HP Laser Mobile Mouse
Apr  6 09:02:50 machine kernel: usb 4-1: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: nouveau 0000:01:00.0: firmware: requesting nouveau/nv86.ctxvals
Apr  6 09:02:50 machine kernel: usbcore: registered new interface driver hiddev
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
Apr  6 09:02:50 machine kernel: input: HP Laser Mobile Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input7
Apr  6 09:02:50 machine kernel: generic-usb 0003:0461:4D62.0001: input,hidraw0: USB HID v1.11 Mouse [HP Laser Mobile Mouse] on usb-0000:00:1a.1-1/input0
Apr  6 09:02:50 machine kernel: usbcore: registered new interface driver usbhid
Apr  6 09:02:50 machine kernel: usbhid: v2.6:USB HID core driver
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 127
Apr  6 09:02:50 machine last message repeated 101 times
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: PFIFO still angry after 101 spins, halt
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Detected a LVDS output
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Detected a DAC output
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Detected a TMDS output
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Detected a LVDS connector
Apr  6 09:02:50 machine kernel: usb 6-2: new full speed USB device using uhci_hcd and address 2
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Detected a VGA connector
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
Apr  6 09:02:50 machine kernel: usb 6-2: New USB device found, idVendor=17ef, idProduct=1003
Apr  6 09:02:50 machine kernel: usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Apr  6 09:02:50 machine kernel: usb 6-2: Product: Integrated Smart Card Reader
Apr  6 09:02:50 machine kernel: usb 6-2: Manufacturer: Lenovo
Apr  6 09:02:50 machine kernel: usb 6-2: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x40210000, bo ffff8800bda82200
Apr  6 09:02:50 machine kernel: [drm] LVDS-7: set mode 1680x1050 1f
Apr  6 09:02:50 machine kernel: fb0: nouveaufb frame buffer device
Apr  6 09:02:50 machine kernel: registered panic notifier
Apr  6 09:02:50 machine kernel: [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
Apr  6 09:02:50 machine kernel: Adding 4192924k swap on /dev/sda6.  Priority:-1 extents:1 across:4192924k 
Apr  6 09:02:50 machine kernel: fuse init (API version 7.13)
Apr  6 09:02:50 machine kernel: lp: driver loaded but no devices found
Apr  6 09:02:50 machine kernel: ppdev: user-space parallel port driver
Apr  6 09:02:50 machine kernel: REISERFS (device sda5): found reiserfs format "3.6" with standard journal
Apr  6 09:02:50 machine kernel: REISERFS (device sda5): using ordered data mode
Apr  6 09:02:50 machine kernel: REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Apr  6 09:02:50 machine kernel: REISERFS (device sda5): checking transaction log (sda5)
Apr  6 09:02:50 machine kernel: REISERFS (device sda5): Using r5 hash to sort names
Apr  6 09:02:50 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig lo 127.0.0.1
Apr  6 09:02:50 machine logger: /etc/rc.d/rc.inet1:  /sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
Apr  6 09:02:50 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig eth0 82.229.182.39 broadcast 82.229.182.255 netmask 255.255.255.0
Apr  6 09:02:52 machine kernel: e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
Apr  6 09:02:52 machine kernel: 0000:00:19.0: eth0: 10/100 speed: disabling TSO
Apr  6 09:02:53 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 nick machine
Apr  6 09:02:53 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 key ************
Apr  6 09:02:54 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 key restricted
Apr  6 09:02:54 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 essid "clauxdeserignac"
Apr  6 09:02:54 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 essid "clauxdeserignac"
Apr  6 09:02:54 machine logger: /etc/rc.d/rc.inet1:  /sbin/route add default gw 82.229.182.254 metric 1
Apr  6 09:02:54 machine acpid: starting up 
Apr  6 09:02:54 machine acpid: 1 rule loaded 
Apr  6 09:02:54 machine acpid: waiting for events: event logging is off 
Apr  6 09:02:56 machine kernel: NET: Registered protocol family 10
Apr  6 09:02:56 machine kernel: lo: Disabled Privacy Extensions
Apr  6 09:02:56 machine smartd[2277]: smartd version 5.38 [x86_64-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen 
Apr  6 09:02:56 machine smartd[2277]: Home page is http://smartmontools.sourceforge.net/  
Apr  6 09:02:56 machine smartd[2277]: Opened configuration file /etc/smartd.conf 
Apr  6 09:02:56 machine smartd[2277]: Drive: DEVICESCAN, implied '-a' Directive on line 23 of file /etc/smartd.conf 
Apr  6 09:02:56 machine smartd[2277]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices 
Apr  6 09:02:56 machine smartd[2277]: Device: /dev/sda, opened 
Apr  6 09:02:56 machine smartd[2277]: Device /dev/sda: using '-d sat' for ATA disk behind SAT layer. 
Apr  6 09:02:56 machine smartd[2277]: Device: /dev/sda, opened 
Apr  6 09:02:56 machine smartd[2277]: Device: /dev/sda, not found in smartd database. 
Apr  6 09:02:57 machine smartd[2277]: Device: /dev/sda, is SMART capable. Adding to "monitor" list. 
Apr  6 09:02:57 machine smartd[2277]: Monitoring 0 ATA and 1 SCSI devices 
Apr  6 09:02:57 machine smartd[2299]: smartd has fork()ed into background mode. New PID=2299. 
Apr  6 09:03:02 machine /usr/sbin/gpm[2383]: *** info [startup.c(95)]: 
Apr  6 09:03:02 machine /usr/sbin/gpm[2383]: Started gpm successfully. Entered daemon mode.
Apr  6 09:03:02 machine hdapsd[2387]: Starting hdapsd
Apr  6 09:03:02 machine kernel: thinkpad_ec: thinkpad_ec 0.40 loaded.
Apr  6 09:03:02 machine kernel: tp_smapi 0.40 loading...
Apr  6 09:03:02 machine kernel: tp_smapi successfully loaded (smapi_port=0xb2).
Apr  6 09:03:02 machine /usr/sbin/gpm[2383]: *** info [mice.c(1766)]: 
Apr  6 09:03:02 machine /usr/sbin/gpm[2383]: imps2: Auto-detected intellimouse PS/2
Apr  6 09:03:02 machine kernel: hdaps: LENOVO ThinkPad T61 detected, setting orientation 1
Apr  6 09:03:02 machine kernel: hdaps: device successfully initialized.
Apr  6 09:03:02 machine kernel: input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input8
Apr  6 09:03:02 machine kernel: input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input9
Apr  6 09:03:02 machine kernel: hdaps: driver successfully loaded.
Apr  6 09:03:02 machine hdapsd[2387]: Selected interface: HDAPS
Apr  6 09:03:02 machine hdapsd[2387]: Selected HDAPS input device: /dev/input/event9
Apr  6 09:03:02 machine hdapsd[2432]: Could not read from /sys/devices/platform/hdaps/position: Device or resource busy
Apr  6 09:03:02 machine kernel: vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
Apr  6 09:03:02 machine hdapsd[2432]: Could not read from /sys/devices/platform/hdaps/position: Device or resource busy
Apr  6 09:03:03 machine last message repeated 3 times
Apr  6 09:03:48 machine shutdown[2473]: shutting down for system reboot
Apr  6 09:03:48 machine init: Switching to runlevel: 6
Apr  6 09:03:49 machine shutdown[2476]: shutting down for system reboot
Apr  6 09:03:51 machine logger: /etc/rc.d/rc.inet1:  /sbin/route del default
Apr  6 09:03:51 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig eth0 down
Apr  6 09:03:52 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig wlan0 down
Apr  6 09:03:52 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig lo down
Apr  6 09:03:52 machine acpid: exiting 
Apr  6 09:03:52 machine exiting on signal 15


------------------------------Starting with VGA text only console 80x25----------------------
Apr  6 09:05:02 machine syslogd 1.4.1: restart.
Apr  6 09:05:02 machine kernel: klogd 1.4.1, log source = /proc/kmsg started.
Apr  6 09:05:02 machine kernel: 3cold
Apr  6 09:05:02 machine kernel: pci 0000:15:00.3: PME# disabled
Apr  6 09:05:02 machine kernel: pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
Apr  6 09:05:02 machine kernel: pci 0000:15:00.4: PME# disabled
Apr  6 09:05:02 machine kernel: pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
Apr  6 09:05:02 machine kernel: pci 0000:15:00.5: PME# disabled
Apr  6 09:05:02 machine kernel: pci 0000:00:1e.0: transparent bridge
Apr  6 09:05:02 machine kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
Apr  6 09:05:02 machine kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
Apr  6 09:05:02 machine kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
Apr  6 09:05:02 machine kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
Apr  6 09:05:02 machine kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
Apr  6 09:05:02 machine kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
Apr  6 09:05:02 machine kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
Apr  6 09:05:02 machine kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
Apr  6 09:05:02 machine kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Apr  6 09:05:02 machine kernel: vgaarb: loaded
Apr  6 09:05:02 machine kernel: SCSI subsystem initialized
Apr  6 09:05:02 machine kernel: usbcore: registered new interface driver usbfs
Apr  6 09:05:02 machine kernel: usbcore: registered new interface driver hub
Apr  6 09:05:02 machine kernel: usbcore: registered new device driver usb
Apr  6 09:05:02 machine kernel: PCI: Using ACPI for IRQ routing
Apr  6 09:05:02 machine kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Apr  6 09:05:02 machine kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Apr  6 09:05:02 machine kernel: Switching to clocksource hpet
Apr  6 09:05:02 machine kernel: pnp: PnP ACPI init
Apr  6 09:05:02 machine kernel: ACPI: bus type pnp registered
Apr  6 09:05:02 machine kernel: pnp: PnP ACPI: found 11 devices
Apr  6 09:05:02 machine kernel: ACPI: ACPI bus type pnp unregistered
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0x0-0x9ffff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xc0000-0xc3fff has been reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xc4000-0xc7fff has been reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xc8000-0xcbfff has been reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xcc000-0xcffff has been reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xe8000-0xebfff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xec000-0xeffff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xf0000-0xfffff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0x100000-0xbeffffff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:02: ioport range 0x164e-0x164f has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: ioport range 0x1000-0x107f has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: ioport range 0x1180-0x11bf has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: ioport range 0x800-0x80f has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: ioport range 0x15e0-0x15ef has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: ioport range 0x1600-0x165f could not be reserved
Apr  6 09:05:02 machine kernel: system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
Apr  6 09:05:02 machine kernel: pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xf0000000-0xefffffff]
Apr  6 09:05:02 machine kernel: pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
Apr  6 09:05:02 machine kernel: pci 0000:00:01.0:   IO window: 0x2000-0x2fff
Apr  6 09:05:02 machine kernel: pci 0000:00:01.0:   MEM window: 0xd4000000-0xd6ffffff
Apr  6 09:05:02 machine kernel: pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.0:   MEM window: 0xfc000000-0xfdffffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.0:   PREFETCH window: 0x000000f8000000-0x000000f80fffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.1:   IO window: 0x4000-0x4fff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.1:   MEM window: 0xdc100000-0xdf2fffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.1:   PREFETCH window: 0x000000dfd00000-0x000000dfdfffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.2:   IO window: 0x5000-0x5fff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.2:   MEM window: 0xd8000000-0xd9ffffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.2:   PREFETCH window: 0x000000dfa00000-0x000000dfafffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.3:   IO window: 0x6000-0x6fff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.3:   MEM window: 0xd0000000-0xd1ffffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.3:   PREFETCH window: 0x000000df700000-0x000000df7fffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.4:   IO window: 0x7000-0x7fff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.4:   MEM window: 0xcc000000-0xcdffffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.4:   PREFETCH window: 0x000000df400000-0x000000df4fffff
Apr  6 09:05:02 machine kernel: pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
Apr  6 09:05:02 machine kernel: pci 0000:15:00.0:   IO window: 0x008000-0x0080ff
Apr  6 09:05:02 machine kernel: pci 0000:15:00.0:   IO window: 0x008400-0x0084ff
Apr  6 09:05:02 machine kernel: pci 0000:15:00.0:   PREFETCH window: 0xf4000000-0xf7ffffff
Apr  6 09:05:02 machine kernel: pci 0000:15:00.0:   MEM window: 0xc0000000-0xc3ffffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
Apr  6 09:05:02 machine kernel: pci 0000:00:1e.0:   IO window: 0x8000-0xbfff
Apr  6 09:05:02 machine kernel: pci 0000:00:1e.0:   MEM window: 0xf8100000-0xfbffffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1e.0:   PREFETCH window: 0x000000f4000000-0x000000f7ffffff
Apr  6 09:05:02 machine kernel: pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr  6 09:05:02 machine kernel: pci 0000:00:1e.0: enabling device (0005 -> 0007)
Apr  6 09:05:02 machine kernel: pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:05:02 machine kernel: NET: Registered protocol family 2
Apr  6 09:05:02 machine kernel: IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Apr  6 09:05:02 machine kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Apr  6 09:05:02 machine kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Apr  6 09:05:02 machine kernel: TCP: Hash tables configured (established 262144 bind 65536)
Apr  6 09:05:02 machine kernel: TCP reno registered
Apr  6 09:05:02 machine kernel: NET: Registered protocol family 1
Apr  6 09:05:02 machine kernel: Simple Boot Flag at 0x35 set to 0x1
Apr  6 09:05:02 machine kernel: Intel AES-NI instructions are not detected.
Apr  6 09:05:02 machine kernel: VFS: Disk quotas dquot_6.5.2
Apr  6 09:05:02 machine kernel: ROMFS MTD (C) 2007 Red Hat, Inc.
Apr  6 09:05:02 machine kernel: msgmni has been set to 5997
Apr  6 09:05:02 machine kernel: alg: No test for cipher_null (cipher_null-generic)
Apr  6 09:05:02 machine kernel: alg: No test for ecb(cipher_null) (ecb-cipher_null)
Apr  6 09:05:02 machine kernel: alg: No test for digest_null (digest_null-generic)
Apr  6 09:05:02 machine kernel: alg: No test for compress_null (compress_null-generic)
Apr  6 09:05:02 machine kernel: alg: No test for fcrypt (fcrypt-generic)
Apr  6 09:05:02 machine kernel: alg: No test for stdrng (krng)
Apr  6 09:05:02 machine kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Apr  6 09:05:02 machine kernel: io scheduler noop registered
Apr  6 09:05:02 machine kernel: io scheduler anticipatory registered
Apr  6 09:05:02 machine kernel: io scheduler deadline registered
Apr  6 09:05:02 machine kernel: io scheduler cfq registered (default)
Apr  6 09:05:02 machine kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Apr  6 09:05:02 machine kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Apr  6 09:05:02 machine kernel: brd: module loaded
Apr  6 09:05:02 machine kernel: loop: module loaded
Apr  6 09:05:02 machine kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input0
Apr  6 09:05:02 machine kernel: ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:05:02 machine kernel: ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
Apr  6 09:05:02 machine kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 
Apr  6 09:05:02 machine kernel: scsi0 : ahci
Apr  6 09:05:02 machine kernel: scsi1 : ahci
Apr  6 09:05:02 machine kernel: scsi2 : ahci
Apr  6 09:05:02 machine kernel: ata1: SATA max UDMA/133 irq_stat 0x00400040 irq 30, connection status changed
Apr  6 09:05:02 machine kernel: ata2: DUMMY
Apr  6 09:05:02 machine kernel: ata3: DUMMY
Apr  6 09:05:02 machine kernel: ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:05:02 machine kernel: scsi3 : ata_piix
Apr  6 09:05:02 machine kernel: scsi4 : ata_piix
Apr  6 09:05:02 machine kernel: ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
Apr  6 09:05:02 machine kernel: ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
Apr  6 09:05:02 machine kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
Apr  6 09:05:02 machine kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Apr  6 09:05:02 machine kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Apr  6 09:05:02 machine kernel: mice: PS/2 mouse device common for all mice
Apr  6 09:05:02 machine kernel: md: linear personality registered for level -1
Apr  6 09:05:02 machine kernel: md: raid0 personality registered for level 0
Apr  6 09:05:02 machine kernel: md: raid1 personality registered for level 1
Apr  6 09:05:02 machine kernel: md: raid10 personality registered for level 10
Apr  6 09:05:02 machine kernel: md: raid6 personality registered for level 6
Apr  6 09:05:02 machine kernel: md: raid5 personality registered for level 5
Apr  6 09:05:02 machine kernel: md: raid4 personality registered for level 4
Apr  6 09:05:02 machine kernel: md: multipath personality registered for level -4
Apr  6 09:05:02 machine kernel: device-mapper: uevent: version 1.0.3
Apr  6 09:05:02 machine kernel: device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Apr  6 09:05:02 machine kernel: cpuidle: using governor ladder
Apr  6 09:05:02 machine kernel: cpuidle: using governor menu
Apr  6 09:05:02 machine kernel: TCP cubic registered
Apr  6 09:05:02 machine kernel: NET: Registered protocol family 17
Apr  6 09:05:02 machine kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Apr  6 09:05:02 machine kernel: ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-U10N, 1.05, max UDMA/33
Apr  6 09:05:02 machine kernel: ata4.00: configured for UDMA/33
Apr  6 09:05:02 machine kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr  6 09:05:02 machine kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Apr  6 09:05:02 machine kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Apr  6 09:05:02 machine kernel: ata1.00: ATA-8: HITACHI HTS543216L9SA00, FB2ZC4EC, max UDMA/100
Apr  6 09:05:02 machine kernel: ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Apr  6 09:05:02 machine kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Apr  6 09:05:02 machine kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Apr  6 09:05:02 machine kernel: ata1.00: configured for UDMA/100
Apr  6 09:05:02 machine kernel: ata1.00: configured for UDMA/100
Apr  6 09:05:02 machine kernel: ata1: EH complete
Apr  6 09:05:02 machine kernel: scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS54321 FB2Z PQ: 0 ANSI: 5
Apr  6 09:05:02 machine kernel: sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Apr  6 09:05:02 machine kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr  6 09:05:02 machine kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr  6 09:05:02 machine kernel:  sda:
Apr  6 09:05:02 machine kernel: scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-U10N  1.05 PQ: 0 ANSI: 5
Apr  6 09:05:02 machine kernel: Uniform CD-ROM driver Revision: 3.20
Apr  6 09:05:02 machine kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Apr  6 09:05:02 machine kernel: md: Waiting for all devices to be available before autodetect
Apr  6 09:05:02 machine kernel: md: If you don't use raid, use raid=noautodetect
Apr  6 09:05:02 machine kernel: md: Autodetecting RAID arrays.
Apr  6 09:05:02 machine kernel: md: Scanned 0 and added 0 devices.
Apr  6 09:05:02 machine kernel: md: autorun ...
Apr  6 09:05:02 machine kernel: md: ... autorun DONE.
Apr  6 09:05:02 machine kernel: REISERFS (device sda4): found reiserfs format "3.6" with standard journal
Apr  6 09:05:02 machine kernel: REISERFS (device sda4): using ordered data mode
Apr  6 09:05:02 machine kernel: REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Apr  6 09:05:02 machine kernel: REISERFS (device sda4): checking transaction log (sda4)
Apr  6 09:05:02 machine kernel: REISERFS (device sda4): Using r5 hash to sort names
Apr  6 09:05:02 machine kernel: devtmpfs: mounted
Apr  6 09:05:02 machine kernel: Freeing unused kernel memory: 576k freed
Apr  6 09:05:02 machine kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Apr  6 09:05:02 machine kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Apr  6 09:05:02 machine kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:05:02 machine kernel: usb usb1: Product: EHCI Host Controller
Apr  6 09:05:02 machine kernel: usb usb1: Manufacturer: Linux 2.6.32.2-strip ehci_hcd
Apr  6 09:05:02 machine kernel: usb usb1: SerialNumber: 0000:00:1a.7
Apr  6 09:05:02 machine kernel: usb usb1: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: hub 1-0:1.0: USB hub found
Apr  6 09:05:02 machine kernel: hub 1-0:1.0: 4 ports detected
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1d.7: debug port 1
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Apr  6 09:05:02 machine kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Apr  6 09:05:02 machine kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:05:02 machine kernel: usb usb2: Product: EHCI Host Controller
Apr  6 09:05:02 machine kernel: usb usb2: Manufacturer: Linux 2.6.32.2-strip ehci_hcd
Apr  6 09:05:02 machine kernel: usb usb2: SerialNumber: 0000:00:1d.7
Apr  6 09:05:02 machine kernel: usb usb2: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: hub 2-0:1.0: USB hub found
Apr  6 09:05:02 machine kernel: hub 2-0:1.0: 6 ports detected
Apr  6 09:05:02 machine kernel: e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
Apr  6 09:05:02 machine kernel: e1000e: Copyright (c) 1999-2008 Intel Corporation.
Apr  6 09:05:02 machine kernel: e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr  6 09:05:02 machine kernel: cfg80211: Using static regulatory domain info
Apr  6 09:05:02 machine kernel: cfg80211: Regulatory domain: US
Apr  6 09:05:02 machine kernel: ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr  6 09:05:02 machine kernel: ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
Apr  6 09:05:02 machine kernel: ^I(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Apr  6 09:05:02 machine kernel: ^I(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Apr  6 09:05:02 machine kernel: ^I(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Apr  6 09:05:02 machine kernel: ^I(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Apr  6 09:05:02 machine kernel: ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
Apr  6 09:05:02 machine kernel: cfg80211: Calling CRDA for country: US
Apr  6 09:05:02 machine kernel: Non-volatile memory driver v1.3
Apr  6 09:05:02 machine kernel: 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:e2:1a:ea:c0
Apr  6 09:05:02 machine kernel: 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
Apr  6 09:05:02 machine kernel: 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1008ff-0ff
Apr  6 09:05:02 machine kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Apr  6 09:05:02 machine kernel: sr 3:0:0:0: Attached scsi generic sg1 type 5
Apr  6 09:05:02 machine kernel: Linux agpgart interface v0.103
Apr  6 09:05:02 machine kernel: usb 2-2: new high speed USB device using ehci_hcd and address 2
Apr  6 09:05:02 machine kernel: uhci_hcd: USB Universal Host Controller Interface driver
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
Apr  6 09:05:02 machine kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:05:02 machine kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:05:02 machine kernel: usb usb3: Product: UHCI Host Controller
Apr  6 09:05:02 machine kernel: usb usb3: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:05:02 machine kernel: usb usb3: SerialNumber: 0000:00:1a.0
Apr  6 09:05:02 machine kernel: usb usb3: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: hub 3-0:1.0: USB hub found
Apr  6 09:05:02 machine kernel: hub 3-0:1.0: 2 ports detected
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
Apr  6 09:05:02 machine kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:05:02 machine kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:05:02 machine kernel: usb usb4: Product: UHCI Host Controller
Apr  6 09:05:02 machine kernel: usb usb4: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:05:02 machine kernel: usb usb4: SerialNumber: 0000:00:1a.1
Apr  6 09:05:02 machine kernel: usb usb4: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: hub 4-0:1.0: USB hub found
Apr  6 09:05:02 machine kernel: hub 4-0:1.0: 2 ports detected
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
Apr  6 09:05:02 machine kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:05:02 machine kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:05:02 machine kernel: usb usb5: Product: UHCI Host Controller
Apr  6 09:05:02 machine kernel: usb usb5: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:05:02 machine kernel: usb usb5: SerialNumber: 0000:00:1d.0
Apr  6 09:05:02 machine kernel: usb usb5: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: hub 5-0:1.0: USB hub found
Apr  6 09:05:02 machine kernel: hub 5-0:1.0: 2 ports detected
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
Apr  6 09:05:02 machine kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:05:02 machine kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:05:02 machine kernel: usb usb6: Product: UHCI Host Controller
Apr  6 09:05:02 machine kernel: usb usb6: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:05:02 machine kernel: usb usb6: SerialNumber: 0000:00:1d.1
Apr  6 09:05:02 machine kernel: usb usb6: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: hub 6-0:1.0: USB hub found
Apr  6 09:05:02 machine kernel: hub 6-0:1.0: 2 ports detected
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
Apr  6 09:05:02 machine kernel: usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:05:02 machine kernel: usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:05:02 machine kernel: usb usb7: Product: UHCI Host Controller
Apr  6 09:05:02 machine kernel: usb usb7: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:05:02 machine kernel: usb usb7: SerialNumber: 0000:00:1d.2
Apr  6 09:05:02 machine kernel: usb usb7: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: hub 7-0:1.0: USB hub found
Apr  6 09:05:02 machine kernel: hub 7-0:1.0: 2 ports detected
Apr  6 09:05:02 machine kernel: ricoh-mmc: Ricoh MMC Controller disabling driver
Apr  6 09:05:02 machine kernel: ricoh-mmc: Copyright(c) Philip Langdale
Apr  6 09:05:02 machine kernel: ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11)
Apr  6 09:05:02 machine kernel: ricoh-mmc: Controller is now disabled.
Apr  6 09:05:02 machine kernel: usb 2-2: New USB device found, idVendor=03f0, idProduct=1812
Apr  6 09:05:02 machine kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr  6 09:05:02 machine kernel: usb 2-2: Product: Officejet Pro K550
Apr  6 09:05:02 machine kernel: usb 2-2: Manufacturer: HP
Apr  6 09:05:02 machine kernel: usb 2-2: SerialNumber: MY5AL2105T
Apr  6 09:05:02 machine kernel: usb 2-2: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
Apr  6 09:05:02 machine kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
Apr  6 09:05:02 machine kernel: ACPI: Lid Switch [LID]
Apr  6 09:05:02 machine kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
Apr  6 09:05:02 machine kernel: ACPI: Sleep Button [SLPB]
Apr  6 09:05:02 machine kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
Apr  6 09:05:02 machine kernel: ACPI: Power Button [PWRF]
Apr  6 09:05:02 machine kernel: ACPI: AC Adapter [AC] (on-line)
Apr  6 09:05:02 machine kernel: ACPI: Battery Slot [BAT0] (battery present)
Apr  6 09:05:02 machine kernel: yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
Apr  6 09:05:02 machine kernel: yenta_cardbus 0000:15:00.0: Socket status: 30000006
Apr  6 09:05:02 machine kernel: yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff
Apr  6 09:05:02 machine kernel: yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff
Apr  6 09:05:02 machine kernel: yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
Apr  6 09:05:02 machine kernel: usb 3-2: new full speed USB device using uhci_hcd and address 2
Apr  6 09:05:02 machine kernel: ACPI: WMI: Mapper loaded
Apr  6 09:05:02 machine kernel: i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Apr  6 09:05:02 machine kernel: usb 3-2: New USB device found, idVendor=0483, idProduct=2016
Apr  6 09:05:02 machine kernel: usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Apr  6 09:05:02 machine kernel: usb 3-2: Product: Biometric Coprocessor
Apr  6 09:05:02 machine kernel: usb 3-2: Manufacturer: STMicroelectronics
Apr  6 09:05:02 machine kernel: usb 3-2: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1812
Apr  6 09:05:02 machine kernel: usbcore: registered new interface driver usblp
Apr  6 09:05:02 machine kernel: sdhci: Secure Digital Host Controller Interface driver
Apr  6 09:05:02 machine kernel: sdhci: Copyright(c) Pierre Ossman
Apr  6 09:05:02 machine kernel: usb 4-1: new low speed USB device using uhci_hcd and address 2
Apr  6 09:05:02 machine kernel: rtc_cmos 00:07: RTC can wake from S4
Apr  6 09:05:02 machine kernel: rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
Apr  6 09:05:02 machine kernel: rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Apr  6 09:05:02 machine kernel: ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr  6 09:05:02 machine kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[f8101000-f81017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
Apr  6 09:05:02 machine kernel: thermal LNXTHERM:01: registered as thermal_zone0
Apr  6 09:05:02 machine kernel: ACPI: Thermal Zone [THM0] (60 C)
Apr  6 09:05:02 machine kernel: thermal LNXTHERM:02: registered as thermal_zone1
Apr  6 09:05:02 machine kernel: ACPI: Thermal Zone [THM1] (53 C)
Apr  6 09:05:02 machine kernel: acpi device:05: registered as cooling_device0
Apr  6 09:05:02 machine kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input5
Apr  6 09:05:02 machine kernel: ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
Apr  6 09:05:02 machine kernel: usb 4-1: New USB device found, idVendor=0461, idProduct=4d62
Apr  6 09:05:02 machine kernel: usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr  6 09:05:02 machine kernel: usb 4-1: Product: HP Laser Mobile Mouse
Apr  6 09:05:02 machine kernel: usb 4-1: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr  6 09:05:02 machine kernel: hda_intel: probe_mask set to 0x1 for device 17aa:20ac
Apr  6 09:05:02 machine kernel: sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
Apr  6 09:05:02 machine kernel: sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr  6 09:05:02 machine kernel: Registered led device: mmc0::
Apr  6 09:05:02 machine kernel: mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
Apr  6 09:05:02 machine kernel: thinkpad_acpi: ThinkPad ACPI Extras v0.23
Apr  6 09:05:02 machine kernel: thinkpad_acpi: http://ibm-acpi.sf.net/
Apr  6 09:05:02 machine kernel: thinkpad_acpi: ThinkPad BIOS 7LETC5WW (2.25 ), EC 7KHT24WW-1.08
Apr  6 09:05:02 machine kernel: thinkpad_acpi: Lenovo ThinkPad T61, model 64574XG
Apr  6 09:05:02 machine kernel: thinkpad_acpi: ACPI backlight control delay disabled
Apr  6 09:05:02 machine kernel: thinkpad_acpi: radio switch found; radios are disabled
Apr  6 09:05:02 machine kernel: thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
Apr  6 09:05:02 machine kernel: thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
Apr  6 09:05:02 machine kernel: Registered led device: tpacpi::thinklight
Apr  6 09:05:02 machine kernel: Registered led device: tpacpi::power
Apr  6 09:05:02 machine kernel: Registered led device: tpacpi::standby
Apr  6 09:05:02 machine kernel: Registered led device: tpacpi::thinkvantage
Apr  6 09:05:02 machine kernel: thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
Apr  6 09:05:02 machine kernel: input: ThinkPad Extra Buttons as /devices/virtual/input/input6
Apr  6 09:05:02 machine kernel: usb 6-2: new full speed USB device using uhci_hcd and address 2
Apr  6 09:05:02 machine kernel: [drm] Initialized drm 1.1.0 20060810
Apr  6 09:05:02 machine kernel: usbcore: registered new interface driver hiddev
Apr  6 09:05:02 machine kernel: input: HP Laser Mobile Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input7
Apr  6 09:05:02 machine kernel: generic-usb 0003:0461:4D62.0001: input,hidraw0: USB HID v1.11 Mouse [HP Laser Mobile Mouse] on usb-0000:00:1a.1-1/input0
Apr  6 09:05:02 machine kernel: usbcore: registered new interface driver usbhid
Apr  6 09:05:02 machine kernel: usbhid: v2.6:USB HID core driver
Apr  6 09:05:02 machine kernel: processor LNXCPU:00: registered as cooling_device1
Apr  6 09:05:02 machine kernel: usb 6-2: New USB device found, idVendor=17ef, idProduct=1003
Apr  6 09:05:02 machine kernel: usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Apr  6 09:05:02 machine kernel: usb 6-2: Product: Integrated Smart Card Reader
Apr  6 09:05:02 machine kernel: usb 6-2: Manufacturer: Lenovo
Apr  6 09:05:02 machine kernel: usb 6-2: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: processor LNXCPU:01: registered as cooling_device2
Apr  6 09:05:02 machine kernel: iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
Apr  6 09:05:02 machine kernel: iwlagn: Copyright(c) 2003-2009 Intel Corporation
Apr  6 09:05:02 machine kernel: iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Apr  6 09:05:02 machine kernel: iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
Apr  6 09:05:02 machine kernel: iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
Apr  6 09:05:02 machine kernel: cfg80211: Regulatory domain changed to country: US
Apr  6 09:05:02 machine kernel: ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr  6 09:05:02 machine kernel: ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Apr  6 09:05:02 machine kernel: ^I(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Apr  6 09:05:02 machine kernel: ^I(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr  6 09:05:02 machine kernel: ^I(5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr  6 09:05:02 machine kernel: ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Apr  6 09:05:02 machine kernel: nouveau 0000:01:00.0: power state changed by ACPI to D0
Apr  6 09:05:02 machine kernel: nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086900a2)
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: ... appears to be valid
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: BIT BIOS found
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Bios version 60.86.3e.00
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: BIT table 'd' not found
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0:   0: 0x00000040: type 0x40 idx 0 tag 0xff
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0:   2: 0x00001231: type 0x31 idx 2 tag 0x07
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0:   3: 0x00000311: type 0x11 idx 3 tag 0xff
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02811300 00000028
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02822312 00010030
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 014333f1 0080c080
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 0000000e 00000000
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDD0F
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE04F
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEAA4
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEB96
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xED83
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEDE8
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: 0xCE7E: parsing output script 0
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: 0xCFF4: parsing output script 0
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: 0xC66A: parsing output script 0
Apr  6 09:05:02 machine kernel: [TTM] Zone  kernel: Available graphics memory: 1535528 kiB.
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: 128 MiB VRAM
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
Apr  6 09:05:02 machine kernel: nouveau 0000:01:00.0: firmware: requesting nouveau/nv86.ctxprog
Apr  6 09:05:02 machine kernel: nouveau 0000:01:00.0: firmware: requesting nouveau/nv86.ctxvals
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Detected a LVDS output
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Detected a DAC output
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Detected a TMDS output
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Detected a LVDS connector
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Detected a VGA connector
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x40210000, bo ffff8800bc81ae00
Apr  6 09:05:02 machine kernel: [drm] LVDS-7: set mode 1680x1050 1f
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: 0xCE82: parsing output script 1
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: 0xCD07: parsing clock script 0
Apr  6 09:05:02 machine kernel: fb0: nouveaufb frame buffer device
Apr  6 09:05:02 machine kernel: registered panic notifier
Apr  6 09:05:02 machine kernel: [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: 0xCE41: parsing clock script 1
Apr  6 09:05:02 machine kernel: Adding 4192924k swap on /dev/sda6.  Priority:-1 extents:1 across:4192924k 
Apr  6 09:05:02 machine kernel: fuse init (API version 7.13)
Apr  6 09:05:02 machine kernel: lp: driver loaded but no devices found
Apr  6 09:05:02 machine kernel: ppdev: user-space parallel port driver
Apr  6 09:05:02 machine kernel: REISERFS (device sda5): found reiserfs format "3.6" with standard journal
Apr  6 09:05:02 machine kernel: REISERFS (device sda5): using ordered data mode
Apr  6 09:05:02 machine kernel: REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Apr  6 09:05:02 machine kernel: REISERFS (device sda5): checking transaction log (sda5)
Apr  6 09:05:02 machine kernel: REISERFS (device sda5): Using r5 hash to sort names
Apr  6 09:05:02 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig lo 127.0.0.1
Apr  6 09:05:02 machine logger: /etc/rc.d/rc.inet1:  /sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
Apr  6 09:05:02 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig eth0 82.229.182.39 broadcast 82.229.182.255 netmask 255.255.255.0
Apr  6 09:05:04 machine kernel: e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
Apr  6 09:05:04 machine kernel: 0000:00:19.0: eth0: 10/100 speed: disabling TSO
Apr  6 09:05:05 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 nick machine
Apr  6 09:05:05 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 key ************
Apr  6 09:05:05 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 key restricted
Apr  6 09:05:05 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 essid "clauxdeserignac"
Apr  6 09:05:06 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 essid "clauxdeserignac"
Apr  6 09:05:06 machine logger: /etc/rc.d/rc.inet1:  /sbin/route add default gw 82.229.182.254 metric 1
Apr  6 09:05:06 machine acpid: starting up 
Apr  6 09:05:06 machine acpid: 1 rule loaded 
Apr  6 09:05:06 machine acpid: waiting for events: event logging is off 
Apr  6 09:05:08 machine kernel: NET: Registered protocol family 10
Apr  6 09:05:08 machine kernel: lo: Disabled Privacy Extensions
Apr  6 09:05:08 machine smartd[2232]: smartd version 5.38 [x86_64-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen 
Apr  6 09:05:08 machine smartd[2232]: Home page is http://smartmontools.sourceforge.net/  
Apr  6 09:05:08 machine smartd[2232]: Opened configuration file /etc/smartd.conf 
Apr  6 09:05:08 machine smartd[2232]: Drive: DEVICESCAN, implied '-a' Directive on line 23 of file /etc/smartd.conf 
Apr  6 09:05:08 machine smartd[2232]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices 
Apr  6 09:05:08 machine smartd[2232]: Device: /dev/sda, opened 
Apr  6 09:05:08 machine smartd[2232]: Device /dev/sda: using '-d sat' for ATA disk behind SAT layer. 
Apr  6 09:05:08 machine smartd[2232]: Device: /dev/sda, opened 
Apr  6 09:05:08 machine smartd[2232]: Device: /dev/sda, not found in smartd database. 
Apr  6 09:05:09 machine smartd[2232]: Device: /dev/sda, is SMART capable. Adding to "monitor" list. 
Apr  6 09:05:09 machine smartd[2232]: Monitoring 0 ATA and 1 SCSI devices 
Apr  6 09:05:09 machine smartd[2254]: smartd has fork()ed into background mode. New PID=2254. 
Apr  6 09:05:14 machine /usr/sbin/gpm[2338]: *** info [startup.c(95)]: 
Apr  6 09:05:14 machine /usr/sbin/gpm[2338]: Started gpm successfully. Entered daemon mode.
Apr  6 09:05:14 machine hdapsd[2342]: Starting hdapsd
Apr  6 09:05:14 machine kernel: thinkpad_ec: thinkpad_ec 0.40 loaded.
Apr  6 09:05:14 machine kernel: tp_smapi 0.40 loading...
Apr  6 09:05:14 machine kernel: tp_smapi successfully loaded (smapi_port=0xb2).
Apr  6 09:05:14 machine /usr/sbin/gpm[2338]: *** info [mice.c(1766)]: 
Apr  6 09:05:14 machine /usr/sbin/gpm[2338]: imps2: Auto-detected intellimouse PS/2
Apr  6 09:05:14 machine kernel: hdaps: LENOVO ThinkPad T61 detected, setting orientation 1
Apr  6 09:05:14 machine kernel: hdaps: device successfully initialized.
Apr  6 09:05:14 machine kernel: input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input8
Apr  6 09:05:14 machine kernel: input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input9
Apr  6 09:05:14 machine kernel: hdaps: driver successfully loaded.
Apr  6 09:05:14 machine hdapsd[2342]: Selected interface: HDAPS
Apr  6 09:05:14 machine hdapsd[2342]: Selected HDAPS input device: /dev/input/event9
Apr  6 09:05:14 machine hdapsd[2387]: Could not read from /sys/devices/platform/hdaps/position: Device or resource busy
Apr  6 09:05:14 machine kernel: vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
Apr  6 09:05:14 machine hdapsd[2387]: Could not read from /sys/devices/platform/hdaps/position: Device or resource busy
Apr  6 09:05:15 machine last message repeated 4 times
Apr  6 09:05:36 machine acpid: client connected from 2459[0:100] 
Apr  6 09:05:36 machine acpid: 1 client rule loaded 
Apr  6 09:05:37 machine kernel: [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
Apr  6 09:05:37 machine kernel: [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
Apr  6 09:24:11 machine hdapsd[2387]: parking
Apr  6 09:24:12 machine hdapsd[2387]: un-parking
Apr  6 09:26:47 machine hdapsd[2387]: parking
Apr  6 09:26:48 machine hdapsd[2387]: un-parking
Apr  6 09:30:25 machine hdapsd[2387]: parking
Apr  6 09:30:26 machine hdapsd[2387]: un-parking
Apr  6 09:32:00 machine kernel: usblp0: removed
Apr  6 09:43:11 machine hdapsd[2387]: parking
Apr  6 09:43:12 machine hdapsd[2387]: un-parking
Apr  6 09:55:31 machine hdapsd[2387]: parking
Apr  6 09:55:32 machine hdapsd[2387]: un-parking
Apr  6 09:55:40 machine hdapsd[2387]: parking
Apr  6 09:55:42 machine hdapsd[2387]: un-parking
Apr  6 09:58:58 machine kernel: [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 2
Apr  6 09:59:00 machine /usr/sbin/gpm[2338]: *** info [mice.c(1766)]: 
Apr  6 09:59:00 machine /usr/sbin/gpm[2338]: imps2: Auto-detected intellimouse PS/2
Apr  6 09:59:04 machine shutdown[5842]: shutting down for system reboot
Apr  6 09:59:04 machine init: Switching to runlevel: 6
Apr  6 09:59:13 machine logger: /etc/rc.d/rc.inet1:  /sbin/route del default
Apr  6 09:59:13 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig eth0 down
Apr  6 09:59:13 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig wlan0 down
Apr  6 09:59:13 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig lo down
Apr  6 09:59:13 machine acpid: exiting 
Apr  6 09:59:14 machine exiting on signal 15


[-- Attachment #3: syslog --]
[-- Type: text/plain, Size: 5375 bytes --]



----------------------------Starting with VESA framebuffer console 1680x1050----------------------
Apr  6 09:02:50 machine kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Apr  6 09:02:50 machine kernel: Console: switching to colour frame buffer device 210x65
Apr  6 09:02:50 machine kernel: floppy0: no floppy controllers found
Apr  6 09:02:50 machine kernel:  sda1 sda2 sda3 < sda5 sda6 > sda4
Apr  6 09:02:50 machine kernel: registered taskstats version 1
Apr  6 09:02:50 machine kernel: VFS: Mounted root (reiserfs filesystem) readonly on device 8:4.
Apr  6 09:02:50 machine kernel: Driver 'rtc_cmos' needs updating - please use bus_type methods
Apr  6 09:02:50 machine kernel: ACPI: SSDT 00000000beee1b32 002C4 (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
Apr  6 09:02:50 machine kernel: ACPI: SSDT 00000000beee1e7b 0085E (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
Apr  6 09:02:50 machine kernel: ACPI: SSDT 00000000beee1a6a 000C8 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
Apr  6 09:02:50 machine kernel: ACPI: SSDT 00000000beee1df6 00085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
Apr  6 09:02:50 machine kernel: sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: 0xEDE8: Condition still not met after 20ms, skipping following opcodes
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
Apr  6 09:02:50 machine kernel: fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
Apr  6 09:02:50 machine kernel: Console: switching to colour dummy device 80x25
Apr  6 09:02:50 machine kernel: Console: switching to colour frame buffer device 210x65
Apr  6 09:02:56 machine smartd[2277]: Problem creating device name scan list 
Apr  6 09:03:02 machine kernel: vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
Apr  6 09:03:02 machine kernel: vboxdrv: counter framework which can generate NMIs is active. You have to prevent
Apr  6 09:03:02 machine kernel: vboxdrv: the usage of hardware performance counters by
Apr  6 09:03:02 machine kernel: vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
Apr  6 09:03:02 machine kernel: VBoxDrv: dbg - g_abExecMemory=ffffffffa056a500
Apr  6 09:03:02 machine kernel: vboxdrv: fAsync=1 offMin=0x6111b offMax=0x6111b


---------------------Starting with text VGA text only console 80x25-------------------------------
Apr  6 09:05:02 machine kernel: raid6: int64x1   1746 MB/s
Apr  6 09:05:02 machine kernel: raid6: int64x2   2417 MB/s
Apr  6 09:05:02 machine kernel: raid6: int64x4   1816 MB/s
Apr  6 09:05:02 machine kernel: raid6: int64x8   1644 MB/s
Apr  6 09:05:02 machine kernel: raid6: sse2x1    3531 MB/s
Apr  6 09:05:02 machine kernel: raid6: sse2x2    3804 MB/s
Apr  6 09:05:02 machine kernel: raid6: sse2x4    6531 MB/s
Apr  6 09:05:02 machine kernel: raid6: using algorithm sse2x4 (6531 MB/s)
Apr  6 09:05:02 machine kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Apr  6 09:05:02 machine kernel: floppy0: no floppy controllers found
Apr  6 09:05:02 machine kernel: sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Apr  6 09:05:02 machine kernel:  sda1 sda2 sda3 < sda5 sda6 > sda4
Apr  6 09:05:02 machine kernel: registered taskstats version 1
Apr  6 09:05:02 machine kernel: VFS: Mounted root (reiserfs filesystem) readonly on device 8:4.
Apr  6 09:05:02 machine kernel: Driver 'rtc_cmos' needs updating - please use bus_type methods
Apr  6 09:05:02 machine kernel: sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
Apr  6 09:05:02 machine kernel: ACPI: SSDT 00000000beee1b32 002C4 (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
Apr  6 09:05:02 machine kernel: ACPI: SSDT 00000000beee1e7b 0085E (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
Apr  6 09:05:02 machine kernel: ACPI: SSDT 00000000beee1a6a 000C8 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
Apr  6 09:05:02 machine kernel: ACPI: 
Apr  6 09:05:02 machine kernel: SSDT 00000000beee1df6 00085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: 0xEDE8: Condition still not met after 20ms, skipping following opcodes
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
Apr  6 09:05:02 machine kernel: Console: switching to colour frame buffer device 210x65
Apr  6 09:05:08 machine smartd[2232]: Problem creating device name scan list 
Apr  6 09:05:14 machine kernel: vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
Apr  6 09:05:14 machine kernel: vboxdrv: counter framework which can generate NMIs is active. You have to prevent
Apr  6 09:05:14 machine kernel: vboxdrv: the usage of hardware performance counters by
Apr  6 09:05:14 machine kernel: vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
Apr  6 09:05:14 machine kernel: VBoxDrv: dbg - g_abExecMemory=ffffffffa056a500
Apr  6 09:05:14 machine kernel: vboxdrv: fAsync=1 offMin=0x61265 offMax=0x61265
Apr  6 09:05:15 machine kernel: CE: hpet increasing min_delta_ns to 15000 nsec

[-- Attachment #4: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

Re: Blank screen at startup (conflict with VESA VGA)

[Marcin Slusarz]

[-- Attachment #1: Type: text/plain, Size: 224 bytes --]

On Tue, Apr 06, 2010 at 10:27:42AM +0200, Didier Spaier wrote:
> Thansk for your answer, kernel logs are attached.
> 

Can you check attached patch? It's a quick hack to kick vesa before
we initialize the hardware.

Marcin


[-- Attachment #2: remove_vesa_earlier.diff --]
[-- Type: text/plain, Size: 611 bytes --]

diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c
index 1de974a..9db8482 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.c
@@ -401,6 +401,17 @@ static struct drm_driver driver = {
 
 static int __init nouveau_init(void)
 {
+	int i;
+
+	for (i = 0 ; i < FB_MAX; i++) {
+		if (!registered_fb[i])
+			continue;
+
+		printk(KERN_ERR "nouveau: removing %s driver\n",
+			       registered_fb[i]->fix.id);
+		unregister_framebuffer(registered_fb[i]);
+	}
+
 	driver.num_ioctls = nouveau_max_ioctl;
 
 	if (nouveau_modeset == -1) {

[-- Attachment #3: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

Re: Blank screen at startup (conflict with VESA VGA)

[Didier Spaier]

Marcin Slusarz wrote:
> On Tue, Apr 06, 2010 at 10:27:42AM +0200, Didier Spaier wrote:
>> Thansk for your answer, kernel logs are attached.
>>
> 
> Can you check attached patch? It's a quick hack to kick vesa before
> we initialize the hardware.
> 
> Marcin
> 
I tried it on a vanilla Linus' 2.6.33.1 kernel and on a recent 2.6 Nouveau kernel pulled from git.

In both case switch from VESA to nouveaufb works well during startup, thanks ;)

Will this patch be applied to mainstream ?

Best regards,

Didier

Re: Blank screen at startup (conflict with VESA VGA)

[Marcin Slusarz]

On Tue, Apr 06, 2010 at 08:43:04PM +0200, Didier Spaier wrote:
> Marcin Slusarz wrote:
> > On Tue, Apr 06, 2010 at 10:27:42AM +0200, Didier Spaier wrote:
> >> Thansk for your answer, kernel logs are attached.
> >>
> > 
> > Can you check attached patch? It's a quick hack to kick vesa before
> > we initialize the hardware.
> > 
> > Marcin
> > 
> I tried it on a vanilla Linus' 2.6.33.1 kernel and on a recent 2.6 Nouveau kernel pulled from git.
> 
> In both case switch from VESA to nouveaufb works well during startup, thanks ;)

Great!

> Will this patch be applied to mainstream ?

Not exactly this one. I'll cook a proper patch in a few days and ping you for
final testing, ok?

Marcin

Re: Blank screen at startup (conflict with VESA VGA)

[Didier Spaier]

Marcin Slusarz wrote:
> On Tue, Apr 06, 2010 at 08:43:04PM +0200, Didier Spaier wrote:
>> Marcin Slusarz wrote:
>>> On Tue, Apr 06, 2010 at 10:27:42AM +0200, Didier Spaier wrote:
>>>> Thansk for your answer, kernel logs are attached.
>>>>
>>> Can you check attached patch? It's a quick hack to kick vesa before
>>> we initialize the hardware.
>>>
>>> Marcin
>>>
>> I tried it on a vanilla Linus' 2.6.33.1 kernel and on a recent 2.6 Nouveau kernel pulled from git.
>>
>> In both case switch from VESA to nouveaufb works well during startup, thanks ;)
> 
> Great!
> 
>> Will this patch be applied to mainstream ?
> 
> Not exactly this one. I'll cook a proper patch in a few days and ping you for
> final testing, ok?
>

Of course OK!

Thanks again,

Didier

Re: Blank screen at startup (conflict with VESA VGA)

[Marcin Slusarz]

Ok, let's CC nouveau list back.

On Mon, Apr 12, 2010 at 12:31:58PM +0200, Didier Spaier wrote:
> >> One thing I didn't check before sending my last mail: can I go back
> >> to console mode after having started X with say, the nv X module ?
> >>
> >> Unfortunately this doesn't work: be it from Fluxbox or KDE, when 
> >> I logout or use Alt+Ctrl+Fn I see a black screen.
> > 
> > nv or nouveau?
> > running nv (X) with nouveau kernel module is unsupported
> 
> Running nv (X).
> 
> I understand that running nv (X) with nouveau kernel module is unsupported,
> but if a nVidia GPU is detected the nouveau kernel module is automatically
> loaded during startup (unless blacklisted, of course).
> 
> This don't prevent to run X with the nv module (in a distribution in which
> nouveau (X) is not available, for instance), but going back to console mode
> doen't work in that case.
> 
> Is there any way to make it working, as some distributions do not include
> (yet) all components needed for nouveau (mainly matching libdrm and X module) ?

I'm not aware of any trick to make both nv and nouveau working.
Maybe there should be a way to prevent nv (and vesa, but not fbdev) from loading
when KMS is in use?

>  > nouveau kernel module works only with nouveau and fbdev X drivers
> 
> I'll will try with fbdev then.



Marcin

Re: Blank screen at startup (conflict with VESA VGA)

[Didier Spaier]

Marcin Slusarz wrote:
> Ok, let's CC nouveau list back.
> 
> On Mon, Apr 12, 2010 at 12:31:58PM +0200, Didier Spaier wrote:
>>>> One thing I didn't check before sending my last mail: can I go back
>>>> to console mode after having started X with say, the nv X module ?
>>>>
>>>> Unfortunately this doesn't work: be it from Fluxbox or KDE, when 
>>>> I logout or use Alt+Ctrl+Fn I see a black screen.
>>> nv or nouveau?
>>> running nv (X) with nouveau kernel module is unsupported
>> Running nv (X).
>>
>> I understand that running nv (X) with nouveau kernel module is unsupported,
>> but if a nVidia GPU is detected the nouveau kernel module is automatically
>> loaded during startup (unless blacklisted, of course).
>>
>> This don't prevent to run X with the nv module (in a distribution in which
>> nouveau (X) is not available, for instance), but going back to console mode
>> doen't work in that case.
>>
>> Is there any way to make it working, as some distributions do not include
>> (yet) all components needed for nouveau (mainly matching libdrm and X module) ?
> 
> I'm not aware of any trick to make both nv and nouveau working.
> Maybe there should be a way to prevent nv (and vesa, but not fbdev) from loading
> when KMS is in use?
> 
Anybody knows one way to do that ?
 >
>>  > nouveau kernel module works only with nouveau and fbdev X drivers
>>
>> I'll will try with fbdev then.
> 
Done, I confirm that there is no problem here to go back and forth (console mode vs X running) with nouveau kernel module and fbdev X module loaded. I tried with Fluxbox, KDE and XFCE.
> 
Didier

Re: Blank screen at startup (conflict with VESA VGA)

[Pekka Paalanen]

On Mon, 12 Apr 2010 12:50:13 +0200
Marcin Slusarz <marcin.slusarz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:

> I'm not aware of any trick to make both nv and nouveau working.
> Maybe there should be a way to prevent nv (and vesa, but not
> fbdev) from loading when KMS is in use?

Yeah, there was a brief discussion about that recently:
http://people.freedesktop.org/~cbrill/dri-log/index.php?date=2010-03-21&channel=nouveau&show_html=true&highlight_names=&update=Update&date=2010-03-21

I haven't heard anything about it since.

-- 
Pekka Paalanen
http://www.iki.fi/pq/

Re: Blank screen at startup (conflict with VESA VGA)

[Christopher James Halse Rogers]

[-- Attachment #1.1: Type: text/plain, Size: 791 bytes --]

On Mon, 2010-04-12 at 20:04 +0300, Pekka Paalanen wrote:
> On Mon, 12 Apr 2010 12:50:13 +0200
> Marcin Slusarz <marcin.slusarz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> 
> > I'm not aware of any trick to make both nv and nouveau working.
> > Maybe there should be a way to prevent nv (and vesa, but not
> > fbdev) from loading when KMS is in use?
> 
> Yeah, there was a brief discussion about that recently:
> http://people.freedesktop.org/~cbrill/dri-log/index.php?date=2010-03-21&channel=nouveau&show_html=true&highlight_names=&update=Update&date=2010-03-21
> 
> I haven't heard anything about it since.
> 

I wrote a patch for vesa on bugzilla[1] to do exactly that; a similar
one for nv wouldn't be hard.

[1] https://bugs.freedesktop.org/show_bug.cgi?id=26878

[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 490 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

Re: Blank screen at startup (conflict with VESA VGA)

[Marcin Slusarz]

On Tue, Apr 13, 2010 at 11:15:28AM +1000, Christopher James Halse Rogers wrote:
> On Mon, 2010-04-12 at 20:04 +0300, Pekka Paalanen wrote:
> > On Mon, 12 Apr 2010 12:50:13 +0200
> > Marcin Slusarz <marcin.slusarz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> > 
> > > I'm not aware of any trick to make both nv and nouveau working.
> > > Maybe there should be a way to prevent nv (and vesa, but not
> > > fbdev) from loading when KMS is in use?
> > 
> > Yeah, there was a brief discussion about that recently:
> > http://people.freedesktop.org/~cbrill/dri-log/index.php?date=2010-03-21&channel=nouveau&show_html=true&highlight_names=&update=Update&date=2010-03-21
> > 
> > I haven't heard anything about it since.
> > 
> 
> I wrote a patch for vesa on bugzilla[1] to do exactly that; a similar
> one for nv wouldn't be hard.
> 
> [1] https://bugs.freedesktop.org/show_bug.cgi?id=26878

Yay, thanks.
I adapted it to xf86-video-nv and it works!
Now we need to trick Aaron to apply it.

Aaron: please, please, please apply.
:)

---
From 112a8c9aa9de6ea30b4c3c98e5d7cbce312aaaf8 Mon Sep 17 00:00:00 2001
From: Marcin Slusarz <marcin.slusarz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Date: Tue, 13 Apr 2010 13:17:56 +0200
Subject: [PATCH] Refuse to bind to a device which has kernel modesetting active.

Touching directly the hardware while kernel modesetting is active
breaks console output.

Patch almost entrirely based on VESA patch by
Christopher James Halse Rogers <christopher.halse.rogers-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>

Signed-off-by: Marcin Slusarz <marcin.slusarz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 configure.ac    |   11 +++++++++++
 src/Makefile.am |    2 +-
 src/nv_driver.c |   33 +++++++++++++++++++++++++++++++++
 3 files changed, 45 insertions(+), 1 deletions(-)

diff --git a/configure.ac b/configure.ac
index d717805..3028005 100644
--- a/configure.ac
+++ b/configure.ac
@@ -134,6 +134,17 @@ AC_SUBST([modes_dir])
 AC_SUBST([XORG_CFLAGS])
 AC_SUBST([moduledir])
 
+if test "x$XSERVER_LIBPCIACCESS" = xyes; then
+    PKG_CHECK_MODULES(LIBDRM, [libdrm > 2.4.3 xf86driproto], HAVE_KMS="yes", HAVE_KMS="no")
+    if test "x$HAVE_KMS" = xyes; then
+        AC_DEFINE(HAVE_KMS, 1, [Have kernel modesetting])
+    else
+        AC_MSG_WARN(Support for detecting kernel modesetting drivers is not available.)
+        AC_MSG_WARN(This driver can cause display problems in the presence of kernel modesetting.)
+        AC_MSG_WARN(Please install libdrm > 2.4.3 and xf86driproto to enable kms detection.)
+    fi
+fi
+
 DRIVER_NAME=nv
 AC_SUBST([DRIVER_NAME])
 
diff --git a/src/Makefile.am b/src/Makefile.am
index 2677d9c..5d57010 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -23,7 +23,7 @@
 # -avoid-version prevents gratuitous .0.0.0 version numbers on the end
 # _ladir passes a dummy rpath to libtool so the thing will actually link
 # TODO: -nostdlib/-Bstatic/-lgcc platform magic, not installing the .a, etc.
-AM_CFLAGS = @XMODES_CFLAGS@ @XORG_CFLAGS@
+AM_CFLAGS = @XMODES_CFLAGS@ @XORG_CFLAGS@ $(LIBDRM_CFLAGS)
 nv_drv_la_LTLIBRARIES = nv_drv.la
 nv_drv_la_LDFLAGS = -module -avoid-version
 nv_drv_ladir = @moduledir@/drivers
diff --git a/src/nv_driver.c b/src/nv_driver.c
index 0d017f9..e117626 100644
--- a/src/nv_driver.c
+++ b/src/nv_driver.c
@@ -33,6 +33,11 @@
 #include "xf86int10.h"
 #include "vbeModes.h"
 
+#ifdef HAVE_KMS
+#include <xf86drmMode.h>
+#include <dri.h>
+#endif
+
 const   OptionInfoRec * RivaAvailableOptions(int chipid, int busid);
 Bool    RivaGetScrnInfoRec(PciChipsets *chips, int chip);
 Bool    G80GetScrnInfoRec(PciChipsets *chips, int chip);
@@ -830,6 +835,26 @@ NVIsSupported(CARD32 id)
     return FALSE;
 }
 
+#ifdef HAVE_KMS
+static Bool NVKernelModesettingEnabled (struct pci_device *device)
+{
+    char *busIdString;
+    int ret;
+
+    if (!xf86LoaderCheckSymbol("DRICreatePCIBusID"))
+	return FALSE;
+
+    busIdString = DRICreatePCIBusID(device);
+
+    ret = drmCheckModesettingSupported(busIdString);
+    xfree(busIdString);
+
+    return (ret == 0);
+}
+#else
+static inline Bool NVKernelModesettingEnabled (struct pci_device *device) { return FALSE; }
+#endif //HAVE_KMS
+
 /* Mandatory */
 #if XSERVER_LIBPCIACCESS
 static Bool
@@ -864,6 +889,14 @@ NVPciProbe(DriverPtr drv, int entity, struct pci_device *dev, intptr_t data)
                NV_NAME ": Found NVIDIA %s at %2.2x@%2.2x:%2.2x:%1.1x\n",
                name, dev->bus, dev->domain, dev->dev, dev->func);
 
+    /* Trying to bring up a NV mode while kernel modesetting is enabled
+       results in badness */
+    if (NVKernelModesettingEnabled (dev)) {
+	xf86Msg (X_ERROR,
+	         "NV: Kernel modesetting driver in use, refusing to load\n");
+	return FALSE;
+    }
+
     if(NVIsG80(id))
         return G80GetScrnInfoRec(NULL, entity);
     else if(dev->vendor_id == PCI_VENDOR_NVIDIA_SGS)
-- 
1.7.0.4

Re: Blank screen at startup (conflict with VESA VGA)

[Aaron Plattner]

On Tue, Apr 13, 2010 at 04:34:51AM -0700, Marcin Slusarz wrote:
> On Tue, Apr 13, 2010 at 11:15:28AM +1000, Christopher James Halse Rogers wrote:
> > On Mon, 2010-04-12 at 20:04 +0300, Pekka Paalanen wrote:
> > > On Mon, 12 Apr 2010 12:50:13 +0200
> > > Marcin Slusarz <marcin.slusarz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> > > 
> > > > I'm not aware of any trick to make both nv and nouveau working.
> > > > Maybe there should be a way to prevent nv (and vesa, but not
> > > > fbdev) from loading when KMS is in use?
> > > 
> > > Yeah, there was a brief discussion about that recently:
> > > http://people.freedesktop.org/~cbrill/dri-log/index.php?date=2010-03-21&channel=nouveau&show_html=true&highlight_names=&update=Update&date=2010-03-21
> > > 
> > > I haven't heard anything about it since.
> > > 
> > 
> > I wrote a patch for vesa on bugzilla[1] to do exactly that; a similar
> > one for nv wouldn't be hard.
> > 
> > [1] https://bugs.freedesktop.org/show_bug.cgi?id=26878
> 
> Yay, thanks.
> I adapted it to xf86-video-nv and it works!
> Now we need to trick Aaron to apply it.
> 
> Aaron: please, please, please apply.
> :)

Sorry for the slow reply.  It sucks that this is necessary, but I guess it
makes sense.  Comments below.

> ---
> From 112a8c9aa9de6ea30b4c3c98e5d7cbce312aaaf8 Mon Sep 17 00:00:00 2001
> From: Marcin Slusarz <marcin.slusarz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Date: Tue, 13 Apr 2010 13:17:56 +0200
> Subject: [PATCH] Refuse to bind to a device which has kernel modesetting active.
> 
> Touching directly the hardware while kernel modesetting is active
> breaks console output.
> 
> Patch almost entrirely based on VESA patch by
> Christopher James Halse Rogers <christopher.halse.rogers-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
> 
> Signed-off-by: Marcin Slusarz <marcin.slusarz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>  configure.ac    |   11 +++++++++++
>  src/Makefile.am |    2 +-
>  src/nv_driver.c |   33 +++++++++++++++++++++++++++++++++
>  3 files changed, 45 insertions(+), 1 deletions(-)
> 
> diff --git a/configure.ac b/configure.ac
> index d717805..3028005 100644
> --- a/configure.ac
> +++ b/configure.ac
> @@ -134,6 +134,17 @@ AC_SUBST([modes_dir])
>  AC_SUBST([XORG_CFLAGS])
>  AC_SUBST([moduledir])
>  
> +if test "x$XSERVER_LIBPCIACCESS" = xyes; then
> +    PKG_CHECK_MODULES(LIBDRM, [libdrm > 2.4.3 xf86driproto], HAVE_KMS="yes", HAVE_KMS="no")
> +    if test "x$HAVE_KMS" = xyes; then
> +        AC_DEFINE(HAVE_KMS, 1, [Have kernel modesetting])
> +    else
> +        AC_MSG_WARN(Support for detecting kernel modesetting drivers is not available.)
> +        AC_MSG_WARN(This driver can cause display problems in the presence of kernel modesetting.)
> +        AC_MSG_WARN(Please install libdrm > 2.4.3 and xf86driproto to enable kms detection.)

s/kms/KMS/

> +    fi
> +fi
> +
>  DRIVER_NAME=nv
>  AC_SUBST([DRIVER_NAME])
>  
> diff --git a/src/Makefile.am b/src/Makefile.am
> index 2677d9c..5d57010 100644
> --- a/src/Makefile.am
> +++ b/src/Makefile.am
> @@ -23,7 +23,7 @@
>  # -avoid-version prevents gratuitous .0.0.0 version numbers on the end
>  # _ladir passes a dummy rpath to libtool so the thing will actually link
>  # TODO: -nostdlib/-Bstatic/-lgcc platform magic, not installing the .a, etc.
> -AM_CFLAGS = @XMODES_CFLAGS@ @XORG_CFLAGS@
> +AM_CFLAGS = @XMODES_CFLAGS@ @XORG_CFLAGS@ $(LIBDRM_CFLAGS)
>  nv_drv_la_LTLIBRARIES = nv_drv.la
>  nv_drv_la_LDFLAGS = -module -avoid-version
>  nv_drv_ladir = @moduledir@/drivers
> diff --git a/src/nv_driver.c b/src/nv_driver.c
> index 0d017f9..e117626 100644
> --- a/src/nv_driver.c
> +++ b/src/nv_driver.c
> @@ -33,6 +33,11 @@
>  #include "xf86int10.h"
>  #include "vbeModes.h"
>  
> +#ifdef HAVE_KMS
> +#include <xf86drmMode.h>
> +#include <dri.h>
> +#endif
> +
>  const   OptionInfoRec * RivaAvailableOptions(int chipid, int busid);
>  Bool    RivaGetScrnInfoRec(PciChipsets *chips, int chip);
>  Bool    G80GetScrnInfoRec(PciChipsets *chips, int chip);
> @@ -830,6 +835,26 @@ NVIsSupported(CARD32 id)
>      return FALSE;
>  }
>  
> +#ifdef HAVE_KMS
> +static Bool NVKernelModesettingEnabled (struct pci_device *device)
> +{
> +    char *busIdString;
> +    int ret;
> +
> +    if (!xf86LoaderCheckSymbol("DRICreatePCIBusID"))
> +	return FALSE;

I know the rest of the code uses tabs, but please use spaces for new code.

> +
> +    busIdString = DRICreatePCIBusID(device);

Eww.  Why doesn't drmCheckModesettingSupported take a pci_device*?  Oh
well, whatever.

> +    ret = drmCheckModesettingSupported(busIdString);

There's no chance of false positives here, right?  E.g. if you set
nouveau.modeset=0 on the kernel command line, does that make this return
nonzero?

> +    xfree(busIdString);
> +
> +    return (ret == 0);
> +}
> +#else
> +static inline Bool NVKernelModesettingEnabled (struct pci_device *device) { return FALSE; }
> +#endif //HAVE_KMS
> +
>  /* Mandatory */
>  #if XSERVER_LIBPCIACCESS
>  static Bool
> @@ -864,6 +889,14 @@ NVPciProbe(DriverPtr drv, int entity, struct pci_device *dev, intptr_t data)
>                 NV_NAME ": Found NVIDIA %s at %2.2x@%2.2x:%2.2x:%1.1x\n",
>                 name, dev->bus, dev->domain, dev->dev, dev->func);
>  
> +    /* Trying to bring up a NV mode while kernel modesetting is enabled
> +       results in badness */
> +    if (NVKernelModesettingEnabled (dev)) {
> +	xf86Msg (X_ERROR,
> +	         "NV: Kernel modesetting driver in use, refusing to load\n");

Please use NV_NAME instead of hard-coding the "NV:" prefix.

> +	return FALSE;
> +    }
> +
>      if(NVIsG80(id))
>          return G80GetScrnInfoRec(NULL, entity);
>      else if(dev->vendor_id == PCI_VENDOR_NVIDIA_SGS)
> -- 
> 1.7.0.4

Re: Blank screen at startup (conflict with VESA VGA)

[Marcin Slusarz]

On Thu, Apr 15, 2010 at 01:19:41PM -0700, Aaron Plattner wrote:
> On Tue, Apr 13, 2010 at 04:34:51AM -0700, Marcin Slusarz wrote:
> > On Tue, Apr 13, 2010 at 11:15:28AM +1000, Christopher James Halse Rogers wrote:
> > > On Mon, 2010-04-12 at 20:04 +0300, Pekka Paalanen wrote:
> > > > On Mon, 12 Apr 2010 12:50:13 +0200
> > > > Marcin Slusarz <marcin.slusarz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> > > > 
> > > > > I'm not aware of any trick to make both nv and nouveau working.
> > > > > Maybe there should be a way to prevent nv (and vesa, but not
> > > > > fbdev) from loading when KMS is in use?
> > > > 
> > > > Yeah, there was a brief discussion about that recently:
> > > > http://people.freedesktop.org/~cbrill/dri-log/index.php?date=2010-03-21&channel=nouveau&show_html=true&highlight_names=&update=Update&date=2010-03-21
> > > > 
> > > > I haven't heard anything about it since.
> > > > 
> > > 
> > > I wrote a patch for vesa on bugzilla[1] to do exactly that; a similar
> > > one for nv wouldn't be hard.
> > > 
> > > [1] https://bugs.freedesktop.org/show_bug.cgi?id=26878
> > 
> > Yay, thanks.
> > I adapted it to xf86-video-nv and it works!
> > Now we need to trick Aaron to apply it.
> > 
> > Aaron: please, please, please apply.
> > :)
> 
> Sorry for the slow reply.  It sucks that this is necessary, but I guess it
> makes sense.  Comments below.

Thanks for a reply!

> > ---
> > From 112a8c9aa9de6ea30b4c3c98e5d7cbce312aaaf8 Mon Sep 17 00:00:00 2001
> > From: Marcin Slusarz <marcin.slusarz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > Date: Tue, 13 Apr 2010 13:17:56 +0200
> > Subject: [PATCH] Refuse to bind to a device which has kernel modesetting active.
> > 
> > Touching directly the hardware while kernel modesetting is active
> > breaks console output.
> > 
> > Patch almost entrirely based on VESA patch by
> > Christopher James Halse Rogers <christopher.halse.rogers-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
> > 
> > Signed-off-by: Marcin Slusarz <marcin.slusarz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > ---
> >  configure.ac    |   11 +++++++++++
> >  src/Makefile.am |    2 +-
> >  src/nv_driver.c |   33 +++++++++++++++++++++++++++++++++
> >  3 files changed, 45 insertions(+), 1 deletions(-)
> > 
> > diff --git a/configure.ac b/configure.ac
> > index d717805..3028005 100644
> > --- a/configure.ac
> > +++ b/configure.ac
> > @@ -134,6 +134,17 @@ AC_SUBST([modes_dir])
> >  AC_SUBST([XORG_CFLAGS])
> >  AC_SUBST([moduledir])
> >  
> > +if test "x$XSERVER_LIBPCIACCESS" = xyes; then
> > +    PKG_CHECK_MODULES(LIBDRM, [libdrm > 2.4.3 xf86driproto], HAVE_KMS="yes", HAVE_KMS="no")
> > +    if test "x$HAVE_KMS" = xyes; then
> > +        AC_DEFINE(HAVE_KMS, 1, [Have kernel modesetting])
> > +    else
> > +        AC_MSG_WARN(Support for detecting kernel modesetting drivers is not available.)
> > +        AC_MSG_WARN(This driver can cause display problems in the presence of kernel modesetting.)
> > +        AC_MSG_WARN(Please install libdrm > 2.4.3 and xf86driproto to enable kms detection.)
> 
> s/kms/KMS/

done

> > +    fi
> > +fi
> > +
> >  DRIVER_NAME=nv
> >  AC_SUBST([DRIVER_NAME])
> >  
> > diff --git a/src/Makefile.am b/src/Makefile.am
> > index 2677d9c..5d57010 100644
> > --- a/src/Makefile.am
> > +++ b/src/Makefile.am
> > @@ -23,7 +23,7 @@
> >  # -avoid-version prevents gratuitous .0.0.0 version numbers on the end
> >  # _ladir passes a dummy rpath to libtool so the thing will actually link
> >  # TODO: -nostdlib/-Bstatic/-lgcc platform magic, not installing the .a, etc.
> > -AM_CFLAGS = @XMODES_CFLAGS@ @XORG_CFLAGS@
> > +AM_CFLAGS = @XMODES_CFLAGS@ @XORG_CFLAGS@ $(LIBDRM_CFLAGS)
> >  nv_drv_la_LTLIBRARIES = nv_drv.la
> >  nv_drv_la_LDFLAGS = -module -avoid-version
> >  nv_drv_ladir = @moduledir@/drivers
> > diff --git a/src/nv_driver.c b/src/nv_driver.c
> > index 0d017f9..e117626 100644
> > --- a/src/nv_driver.c
> > +++ b/src/nv_driver.c
> > @@ -33,6 +33,11 @@
> >  #include "xf86int10.h"
> >  #include "vbeModes.h"
> >  
> > +#ifdef HAVE_KMS
> > +#include <xf86drmMode.h>
> > +#include <dri.h>
> > +#endif
> > +
> >  const   OptionInfoRec * RivaAvailableOptions(int chipid, int busid);
> >  Bool    RivaGetScrnInfoRec(PciChipsets *chips, int chip);
> >  Bool    G80GetScrnInfoRec(PciChipsets *chips, int chip);
> > @@ -830,6 +835,26 @@ NVIsSupported(CARD32 id)
> >      return FALSE;
> >  }
> >  
> > +#ifdef HAVE_KMS
> > +static Bool NVKernelModesettingEnabled (struct pci_device *device)
> > +{
> > +    char *busIdString;
> > +    int ret;
> > +
> > +    if (!xf86LoaderCheckSymbol("DRICreatePCIBusID"))
> > +	return FALSE;
> 
> I know the rest of the code uses tabs, but please use spaces for new code.

ok

> > +
> > +    busIdString = DRICreatePCIBusID(device);
> 
> Eww.  Why doesn't drmCheckModesettingSupported take a pci_device*?  Oh
> well, whatever.

That's how it was done from the beginning - drmCheckModesettingSupported parses busIdString
and reads some files in /sys based on this information...

> > +    ret = drmCheckModesettingSupported(busIdString);
> 
> There's no chance of false positives here, right?  E.g. if you set
> nouveau.modeset=0 on the kernel command line, does that make this return
> nonzero?

With nouveau.modeset=0 it returns nonzero and nv works fine.

> > +    xfree(busIdString);
> > +
> > +    return (ret == 0);
> > +}
> > +#else
> > +static inline Bool NVKernelModesettingEnabled (struct pci_device *device) { return FALSE; }
> > +#endif //HAVE_KMS
> > +
> >  /* Mandatory */
> >  #if XSERVER_LIBPCIACCESS
> >  static Bool
> > @@ -864,6 +889,14 @@ NVPciProbe(DriverPtr drv, int entity, struct pci_device *dev, intptr_t data)
> >                 NV_NAME ": Found NVIDIA %s at %2.2x@%2.2x:%2.2x:%1.1x\n",
> >                 name, dev->bus, dev->domain, dev->dev, dev->func);
> >  
> > +    /* Trying to bring up a NV mode while kernel modesetting is enabled
> > +       results in badness */
> > +    if (NVKernelModesettingEnabled (dev)) {
> > +	xf86Msg (X_ERROR,
> > +	         "NV: Kernel modesetting driver in use, refusing to load\n");
> 
> Please use NV_NAME instead of hard-coding the "NV:" prefix.

done

> > +	return FALSE;
> > +    }
> > +
> >      if(NVIsG80(id))
> >          return G80GetScrnInfoRec(NULL, entity);
> >      else if(dev->vendor_id == PCI_VENDOR_NVIDIA_SGS)
> > -- 
> > 1.7.0.4

---
From: Marcin Slusarz <marcin.slusarz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH] Refuse to bind to a device which has kernel modesetting active.

Touching directly the hardware while kernel modesetting is active
breaks console output.

Patch almost entrirely based on VESA patch by
Christopher James Halse Rogers <christopher.halse.rogers-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>

Signed-off-by: Marcin Slusarz <marcin.slusarz-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 configure.ac    |   11 +++++++++++
 src/Makefile.am |    2 +-
 src/nv_driver.c |   33 +++++++++++++++++++++++++++++++++
 3 files changed, 45 insertions(+), 1 deletions(-)

diff --git a/configure.ac b/configure.ac
index d717805..c51ab4a 100644
--- a/configure.ac
+++ b/configure.ac
@@ -134,6 +134,17 @@ AC_SUBST([modes_dir])
 AC_SUBST([XORG_CFLAGS])
 AC_SUBST([moduledir])
 
+if test "x$XSERVER_LIBPCIACCESS" = xyes; then
+    PKG_CHECK_MODULES(LIBDRM, [libdrm > 2.4.3 xf86driproto], HAVE_KMS="yes", HAVE_KMS="no")
+    if test "x$HAVE_KMS" = xyes; then
+        AC_DEFINE(HAVE_KMS, 1, [Have kernel modesetting])
+    else
+        AC_MSG_WARN(Support for detecting kernel modesetting drivers is not available.)
+        AC_MSG_WARN(This driver can cause display problems in the presence of kernel modesetting.)
+        AC_MSG_WARN(Please install libdrm > 2.4.3 and xf86driproto to enable KMS detection.)
+    fi
+fi
+
 DRIVER_NAME=nv
 AC_SUBST([DRIVER_NAME])
 
diff --git a/src/Makefile.am b/src/Makefile.am
index 2677d9c..5d57010 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -23,7 +23,7 @@
 # -avoid-version prevents gratuitous .0.0.0 version numbers on the end
 # _ladir passes a dummy rpath to libtool so the thing will actually link
 # TODO: -nostdlib/-Bstatic/-lgcc platform magic, not installing the .a, etc.
-AM_CFLAGS = @XMODES_CFLAGS@ @XORG_CFLAGS@
+AM_CFLAGS = @XMODES_CFLAGS@ @XORG_CFLAGS@ $(LIBDRM_CFLAGS)
 nv_drv_la_LTLIBRARIES = nv_drv.la
 nv_drv_la_LDFLAGS = -module -avoid-version
 nv_drv_ladir = @moduledir@/drivers
diff --git a/src/nv_driver.c b/src/nv_driver.c
index 0d017f9..d7cc963 100644
--- a/src/nv_driver.c
+++ b/src/nv_driver.c
@@ -33,6 +33,11 @@
 #include "xf86int10.h"
 #include "vbeModes.h"
 
+#ifdef HAVE_KMS
+#include <xf86drmMode.h>
+#include <dri.h>
+#endif
+
 const   OptionInfoRec * RivaAvailableOptions(int chipid, int busid);
 Bool    RivaGetScrnInfoRec(PciChipsets *chips, int chip);
 Bool    G80GetScrnInfoRec(PciChipsets *chips, int chip);
@@ -830,6 +835,26 @@ NVIsSupported(CARD32 id)
     return FALSE;
 }
 
+#ifdef HAVE_KMS
+static Bool NVKernelModesettingEnabled(struct pci_device *device)
+{
+    char *busIdString;
+    int ret;
+
+    if (!xf86LoaderCheckSymbol("DRICreatePCIBusID"))
+        return FALSE;
+
+    busIdString = DRICreatePCIBusID(device);
+
+    ret = drmCheckModesettingSupported(busIdString);
+    xfree(busIdString);
+
+    return (ret == 0);
+}
+#else
+static inline Bool NVKernelModesettingEnabled(struct pci_device *device) { return FALSE; }
+#endif //HAVE_KMS
+
 /* Mandatory */
 #if XSERVER_LIBPCIACCESS
 static Bool
@@ -864,6 +889,14 @@ NVPciProbe(DriverPtr drv, int entity, struct pci_device *dev, intptr_t data)
                NV_NAME ": Found NVIDIA %s at %2.2x@%2.2x:%2.2x:%1.1x\n",
                name, dev->bus, dev->domain, dev->dev, dev->func);
 
+    /* Trying to bring up a NV mode while kernel modesetting is enabled
+       results in badness */
+    if (NVKernelModesettingEnabled(dev)) {
+        xf86Msg(X_ERROR,
+                NV_NAME ": Kernel modesetting driver in use, refusing to load\n");
+        return FALSE;
+    }
+
     if(NVIsG80(id))
         return G80GetScrnInfoRec(NULL, entity);
     else if(dev->vendor_id == PCI_VENDOR_NVIDIA_SGS)
-- 
1.7.0.4

Re: Blank screen at startup (conflict with VESA VGA)

[Pekka Paalanen]

On Mon, 05 Apr 2010 22:59:40 +0200
Didier Spaier <didier.spaier-GqzDj6/B2j8@public.gmane.org> wrote:

> I have a Lenovo Thinkpad T61. lspci|grep VGA says:
> 01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS
> 140M (rev a1)
> 
> I have Slacware64-13.0 and Slackware64-current installed.
> 
> Nouveau is modularized in all my kernels for -current.
> 
> A problem arise even if I don't want to use nouveau under X:
> unless nouveau be blacklisted in /etc/modprobe.d/blacklist.conf
> at startup,
> - when using one of the VESA modes at startup after a while
> screen goes blank and I get a warning in syslog e.g: Apr  2
> 18:58:56 darkstar kernel: fb: conflicting fb hw usage nouveaufb
> vs VESA VGA - removing generic driver,

This message is the expected behaviour. It is not an error.
It means the vesafb hand-over is working, or at least it
is attempted.

At what stage does the screen go blank? At X startup?

> - no problem when using a VGA mode (text only),
> 
> this disregarding which X driver I use afterwards (I always start
> in console mode).

Are you trying to use nouveau.ko in kernel, and a non-Nouveau
X driver at the same time? That cannot work.

If nouveau.ko is loaded, the only option for X is to use
the nouveau driver (or perhaps fbdev). Any other driver,
e.g. "vesa" or "nv", will lead to trouble.

What kind of setup are you trying to run in this regard?

> But according to this page:
> http://nouveau.freedesktop.org/wiki/KernelModeSetting
> I thought nouveaufb shouldn't conflict with vesafb ? Am I wrong ?

The hand-over should work: when nouveaufb initialises, vesafb
gets automatically deactivated.

In any case, complete kernel and X logs will help to diagnose
your situation.

-- 
Pekka Paalanen
http://www.iki.fi/pq/

Re: Blank screen at startup (conflict with VESA VGA)

[Didier Spaier]

[-- Attachment #1: Type: text/plain, Size: 2917 bytes --]

Thanks for your answer.

I tried with a 2.6.32.2 kernel (nouveau works under X).

Pekka Paalanen wrote:
> On Mon, 05 Apr 2010 22:59:40 +0200
> Didier Spaier <didier.spaier-GqzDj6/B2j8@public.gmane.org> wrote:
> 
>> I have a Lenovo Thinkpad T61. lspci|grep VGA says:
>> 01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS
>> 140M (rev a1)
>>
>> I have Slacware64-13.0 and Slackware64-current installed.
>>
>> Nouveau is modularized in all my kernels for -current.
>>
>> A problem arise even if I don't want to use nouveau under X:
>> unless nouveau be blacklisted in /etc/modprobe.d/blacklist.conf
>> at startup,
>> - when using one of the VESA modes at startup after a while
>> screen goes blank and I get a warning in syslog e.g: Apr  2
>> 18:58:56 darkstar kernel: fb: conflicting fb hw usage nouveaufb
>> vs VESA VGA - removing generic driver,
> 
> This message is the expected behaviour. It is not an error.
> It means the vesafb hand-over is working, or at least it
> is attempted.
> 
> At what stage does the screen go blank? At X startup?

Nope. I start the system in console mode and get the blank screen before bash prompt, when it tries to switch from VESA to nouveaufb.

> 
>> - no problem when using a VGA mode (text only),
>>
>> this disregarding which X driver I use afterwards (I always start
>> in console mode).
> 
> Are you trying to use nouveau.ko in kernel, and a non-Nouveau
> X driver at the same time? That cannot work.
> 
> If nouveau.ko is loaded, the only option for X is to use
> the nouveau driver (or perhaps fbdev). Any other driver,
> e.g. "vesa" or "nv", will lead to trouble.
> 
> What kind of setup are you trying to run in this regard?
> 
I know that using another X driver than nouveau whilst nouveau kernel module is loaded shouldn't and doesn't work, I've tried that a couple of times ;)

But here the screen, goes blank *before* i can even type "startx" if I start if VESA mode.

Iff I can see the screen on the console I have no problem to use nouveau under X

Whenever I start Linux with lilo, having lilo option "VGA=ask" in lilo.conf:
-> If I choose a VESA mode I get a blank screen at time of (automatically) switching to nouveaufb before bash prompt.
-> If I choose a VGA mode switching occurs with no problem ("old" screen in 80x25 is erased but I can see the new messages in 1680x1050).

>> But according to this page:
>> http://nouveau.freedesktop.org/wiki/KernelModeSetting
>> I thought nouveaufb shouldn't conflict with vesafb ? Am I wrong ?
> 
> The hand-over should work: when nouveaufb initialises, vesafb
> gets automatically deactivated.
> 
Yes but it seems than if vesafb was loaded nouveaufb doesn't work well at first

> In any case, complete kernel and X logs will help to diagnose
> your situation.
> 
Logs are appended (only kernel logs, not X logs as I have no problem to use nouveau under X provided I can see the screen to type "startx" ;)

[-- Attachment #2: messages --]
[-- Type: text/plain, Size: 82438 bytes --]



-----------------Starting with VESA framebuffer console 1680x1050-----------------------------
Apr  6 09:02:50 machine syslogd 1.4.1: restart.
Apr  6 09:02:50 machine kernel: klogd 1.4.1, log source = /proc/kmsg started.
Apr  6 09:02:50 machine kernel: etting latency timer to 64
Apr  6 09:02:50 machine kernel: pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
Apr  6 09:02:50 machine kernel: pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr  6 09:02:50 machine kernel: pci 0000:00:1e.0: enabling device (0005 -> 0007)
Apr  6 09:02:50 machine kernel: pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:02:50 machine kernel: NET: Registered protocol family 2
Apr  6 09:02:50 machine kernel: IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Apr  6 09:02:50 machine kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Apr  6 09:02:50 machine kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Apr  6 09:02:50 machine kernel: TCP: Hash tables configured (established 262144 bind 65536)
Apr  6 09:02:50 machine kernel: TCP reno registered
Apr  6 09:02:50 machine kernel: NET: Registered protocol family 1
Apr  6 09:02:50 machine kernel: Simple Boot Flag at 0x35 set to 0x1
Apr  6 09:02:50 machine kernel: Intel AES-NI instructions are not detected.
Apr  6 09:02:50 machine kernel: VFS: Disk quotas dquot_6.5.2
Apr  6 09:02:50 machine kernel: ROMFS MTD (C) 2007 Red Hat, Inc.
Apr  6 09:02:50 machine kernel: msgmni has been set to 5997
Apr  6 09:02:50 machine kernel: alg: No test for cipher_null (cipher_null-generic)
Apr  6 09:02:50 machine kernel: alg: No test for ecb(cipher_null) (ecb-cipher_null)
Apr  6 09:02:50 machine kernel: alg: No test for digest_null (digest_null-generic)
Apr  6 09:02:50 machine kernel: alg: No test for compress_null (compress_null-generic)
Apr  6 09:02:50 machine kernel: alg: No test for fcrypt (fcrypt-generic)
Apr  6 09:02:50 machine kernel: alg: No test for stdrng (krng)
Apr  6 09:02:50 machine kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Apr  6 09:02:50 machine kernel: io scheduler noop registered
Apr  6 09:02:50 machine kernel: io scheduler anticipatory registered
Apr  6 09:02:50 machine kernel: io scheduler deadline registered
Apr  6 09:02:50 machine kernel: io scheduler cfq registered (default)
Apr  6 09:02:50 machine kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Apr  6 09:02:50 machine kernel: vesafb: framebuffer at 0xd5000000, mapped to 0xffffc90004100000, using 13781k, total 14336k
Apr  6 09:02:50 machine kernel: vesafb: mode is 1680x1050x32, linelength=6720, pages=1
Apr  6 09:02:50 machine kernel: vesafb: scrolling: redraw
Apr  6 09:02:50 machine kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Apr  6 09:02:50 machine kernel: fb0: VESA VGA frame buffer device
Apr  6 09:02:50 machine kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Apr  6 09:02:50 machine kernel: brd: module loaded
Apr  6 09:02:50 machine kernel: loop: module loaded
Apr  6 09:02:50 machine kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input0
Apr  6 09:02:50 machine kernel: ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:02:50 machine kernel: ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
Apr  6 09:02:50 machine kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 
Apr  6 09:02:50 machine kernel: scsi0 : ahci
Apr  6 09:02:50 machine kernel: scsi1 : ahci
Apr  6 09:02:50 machine kernel: scsi2 : ahci
Apr  6 09:02:50 machine kernel: ata1: SATA max UDMA/133 irq_stat 0x00400040 irq 30, connection status changed
Apr  6 09:02:50 machine kernel: ata2: DUMMY
Apr  6 09:02:50 machine kernel: ata3: DUMMY
Apr  6 09:02:50 machine kernel: ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:02:50 machine kernel: scsi3 : ata_piix
Apr  6 09:02:50 machine kernel: scsi4 : ata_piix
Apr  6 09:02:50 machine kernel: ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
Apr  6 09:02:50 machine kernel: ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
Apr  6 09:02:50 machine kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
Apr  6 09:02:50 machine kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Apr  6 09:02:50 machine kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Apr  6 09:02:50 machine kernel: mice: PS/2 mouse device common for all mice
Apr  6 09:02:50 machine kernel: md: linear personality registered for level -1
Apr  6 09:02:50 machine kernel: md: raid0 personality registered for level 0
Apr  6 09:02:50 machine kernel: md: raid1 personality registered for level 1
Apr  6 09:02:50 machine kernel: md: raid10 personality registered for level 10
Apr  6 09:02:50 machine kernel: md: raid6 personality registered for level 6
Apr  6 09:02:50 machine kernel: md: raid5 personality registered for level 5
Apr  6 09:02:50 machine kernel: md: raid4 personality registered for level 4
Apr  6 09:02:50 machine kernel: md: multipath personality registered for level -4
Apr  6 09:02:50 machine kernel: device-mapper: uevent: version 1.0.3
Apr  6 09:02:50 machine kernel: device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Apr  6 09:02:50 machine kernel: cpuidle: using governor ladder
Apr  6 09:02:50 machine kernel: cpuidle: using governor menu
Apr  6 09:02:50 machine kernel: TCP cubic registered
Apr  6 09:02:50 machine kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Apr  6 09:02:50 machine kernel: NET: Registered protocol family 17
Apr  6 09:02:50 machine kernel: ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-U10N, 1.05, max UDMA/33
Apr  6 09:02:50 machine kernel: ata4.00: configured for UDMA/33
Apr  6 09:02:50 machine kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr  6 09:02:50 machine kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Apr  6 09:02:50 machine kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Apr  6 09:02:50 machine kernel: ata1.00: ATA-8: HITACHI HTS543216L9SA00, FB2ZC4EC, max UDMA/100
Apr  6 09:02:50 machine kernel: ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Apr  6 09:02:50 machine kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Apr  6 09:02:50 machine kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Apr  6 09:02:50 machine kernel: ata1.00: configured for UDMA/100
Apr  6 09:02:50 machine kernel: ata1.00: configured for UDMA/100
Apr  6 09:02:50 machine kernel: ata1: EH complete
Apr  6 09:02:50 machine kernel: scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS54321 FB2Z PQ: 0 ANSI: 5
Apr  6 09:02:50 machine kernel: sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Apr  6 09:02:50 machine kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr  6 09:02:50 machine kernel: scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-U10N  1.05 PQ: 0 ANSI: 5
Apr  6 09:02:50 machine kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr  6 09:02:50 machine kernel:  sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Apr  6 09:02:50 machine kernel: Uniform CD-ROM driver Revision: 3.20
Apr  6 09:02:50 machine kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Apr  6 09:02:50 machine kernel: md: Waiting for all devices to be available before autodetect
Apr  6 09:02:50 machine kernel: md: If you don't use raid, use raid=noautodetect
Apr  6 09:02:50 machine kernel: md: Autodetecting RAID arrays.
Apr  6 09:02:50 machine kernel: md: Scanned 0 and added 0 devices.
Apr  6 09:02:50 machine kernel: md: autorun ...
Apr  6 09:02:50 machine kernel: md: ... autorun DONE.
Apr  6 09:02:50 machine kernel: REISERFS (device sda4): found reiserfs format "3.6" with standard journal
Apr  6 09:02:50 machine kernel: REISERFS (device sda4): using ordered data mode
Apr  6 09:02:50 machine kernel: REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Apr  6 09:02:50 machine kernel: REISERFS (device sda4): checking transaction log (sda4)
Apr  6 09:02:50 machine kernel: REISERFS (device sda4): Using r5 hash to sort names
Apr  6 09:02:50 machine kernel: devtmpfs: mounted
Apr  6 09:02:50 machine kernel: Freeing unused kernel memory: 576k freed
Apr  6 09:02:50 machine kernel: cfg80211: Using static regulatory domain info
Apr  6 09:02:50 machine kernel: cfg80211: Regulatory domain: US
Apr  6 09:02:50 machine kernel: ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr  6 09:02:50 machine kernel: ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
Apr  6 09:02:50 machine kernel: HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr  6 09:02:50 machine kernel: hda_intel: probe_mask set to 0x1 for device 17aa:20ac
Apr  6 09:02:50 machine kernel: ^I(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Apr  6 09:02:50 machine kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
Apr  6 09:02:50 machine kernel: ACPI: AC Adapter [AC] (on-line)
Apr  6 09:02:50 machine kernel: ^I(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Apr  6 09:02:50 machine kernel: ^I(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Apr  6 09:02:50 machine kernel: ^I(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Apr  6 09:02:50 machine kernel: ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
Apr  6 09:02:50 machine kernel: cfg80211: Calling CRDA for country: US
Apr  6 09:02:50 machine kernel: ACPI: Battery Slot [BAT0] (battery present)
Apr  6 09:02:50 machine kernel: ACPI: Lid Switch [LID]
Apr  6 09:02:50 machine kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
Apr  6 09:02:50 machine kernel: ACPI: Sleep Button [SLPB]
Apr  6 09:02:50 machine kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
Apr  6 09:02:50 machine kernel: ACPI: Power Button [PWRF]
Apr  6 09:02:50 machine kernel: e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
Apr  6 09:02:50 machine kernel: e1000e: Copyright (c) 1999-2008 Intel Corporation.
Apr  6 09:02:50 machine kernel: ACPI: WMI: Mapper loaded
Apr  6 09:02:50 machine kernel: acpi device:05: registered as cooling_device0
Apr  6 09:02:50 machine kernel: ricoh-mmc: Ricoh MMC Controller disabling driver
Apr  6 09:02:50 machine kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input5
Apr  6 09:02:50 machine kernel: ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
Apr  6 09:02:50 machine kernel: ricoh-mmc: Copyright(c) Philip Langdale
Apr  6 09:02:50 machine kernel: ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11)
Apr  6 09:02:50 machine kernel: ricoh-mmc: Controller is now disabled.
Apr  6 09:02:50 machine kernel: yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
Apr  6 09:02:50 machine kernel: Non-volatile memory driver v1.3
Apr  6 09:02:50 machine kernel: yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
Apr  6 09:02:50 machine kernel: yenta_cardbus 0000:15:00.0: Socket status: 30000006
Apr  6 09:02:50 machine kernel: yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff
Apr  6 09:02:50 machine kernel: yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff
Apr  6 09:02:50 machine kernel: yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
Apr  6 09:02:50 machine kernel: rtc_cmos 00:07: RTC can wake from S4
Apr  6 09:02:50 machine kernel: rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
Apr  6 09:02:50 machine kernel: ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr  6 09:02:50 machine kernel: rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Apr  6 09:02:50 machine kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[f8101000-f81017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
Apr  6 09:02:50 machine kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Apr  6 09:02:50 machine kernel: sr 3:0:0:0: Attached scsi generic sg1 type 5
Apr  6 09:02:50 machine kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Apr  6 09:02:50 machine kernel: Linux agpgart interface v0.103
Apr  6 09:02:50 machine kernel: thermal LNXTHERM:01: registered as thermal_zone0
Apr  6 09:02:50 machine kernel: ACPI: Thermal Zone [THM0] (58 C)
Apr  6 09:02:50 machine kernel: thermal LNXTHERM:02: registered as thermal_zone1
Apr  6 09:02:50 machine kernel: ACPI: Thermal Zone [THM1] (57 C)
Apr  6 09:02:50 machine kernel: thinkpad_acpi: ThinkPad ACPI Extras v0.23
Apr  6 09:02:50 machine kernel: thinkpad_acpi: http://ibm-acpi.sf.net/
Apr  6 09:02:50 machine kernel: thinkpad_acpi: ThinkPad BIOS 7LETC5WW (2.25 ), EC 7KHT24WW-1.08
Apr  6 09:02:50 machine kernel: thinkpad_acpi: Lenovo ThinkPad T61, model 64574XG
Apr  6 09:02:50 machine kernel: thinkpad_acpi: ACPI backlight control delay disabled
Apr  6 09:02:50 machine kernel: thinkpad_acpi: radio switch found; radios are disabled
Apr  6 09:02:50 machine kernel: thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
Apr  6 09:02:50 machine kernel: thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
Apr  6 09:02:50 machine kernel: processor LNXCPU:00: registered as cooling_device1
Apr  6 09:02:50 machine kernel: Registered led device: tpacpi::thinklight
Apr  6 09:02:50 machine kernel: Registered led device: tpacpi::power
Apr  6 09:02:50 machine kernel: Registered led device: tpacpi::standby
Apr  6 09:02:50 machine kernel: processor LNXCPU:01: registered as cooling_device2
Apr  6 09:02:50 machine kernel: uhci_hcd: USB Universal Host Controller Interface driver
Apr  6 09:02:50 machine kernel: Registered led device: tpacpi::thinkvantage
Apr  6 09:02:50 machine kernel: sdhci: Secure Digital Host Controller Interface driver
Apr  6 09:02:50 machine kernel: sdhci: Copyright(c) Pierre Ossman
Apr  6 09:02:50 machine kernel: thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
Apr  6 09:02:50 machine kernel: input: ThinkPad Extra Buttons as /devices/virtual/input/input6
Apr  6 09:02:50 machine kernel: e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr  6 09:02:50 machine kernel: sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
Apr  6 09:02:50 machine kernel: sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr  6 09:02:50 machine kernel: Registered led device: mmc0::
Apr  6 09:02:50 machine kernel: mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
Apr  6 09:02:50 machine kernel: 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:e2:1a:ea:c0
Apr  6 09:02:50 machine kernel: 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
Apr  6 09:02:50 machine kernel: 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1008ff-0ff
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Apr  6 09:02:50 machine kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Apr  6 09:02:50 machine kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:02:50 machine kernel: usb usb1: Product: EHCI Host Controller
Apr  6 09:02:50 machine kernel: usb usb1: Manufacturer: Linux 2.6.32.2-strip ehci_hcd
Apr  6 09:02:50 machine kernel: usb usb1: SerialNumber: 0000:00:1a.7
Apr  6 09:02:50 machine kernel: usb usb1: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: hub 1-0:1.0: USB hub found
Apr  6 09:02:50 machine kernel: hub 1-0:1.0: 4 ports detected
Apr  6 09:02:50 machine kernel: i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Apr  6 09:02:50 machine kernel: [drm] Initialized drm 1.1.0 20060810
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
Apr  6 09:02:50 machine kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:02:50 machine kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:02:50 machine kernel: usb usb2: Product: UHCI Host Controller
Apr  6 09:02:50 machine kernel: usb usb2: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:02:50 machine kernel: usb usb2: SerialNumber: 0000:00:1a.0
Apr  6 09:02:50 machine kernel: usb usb2: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: hub 2-0:1.0: USB hub found
Apr  6 09:02:50 machine kernel: hub 2-0:1.0: 2 ports detected
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1d.7: debug port 1
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
Apr  6 09:02:50 machine kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Apr  6 09:02:50 machine kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
Apr  6 09:02:50 machine kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:02:50 machine kernel: usb usb3: Product: EHCI Host Controller
Apr  6 09:02:50 machine kernel: usb usb3: Manufacturer: Linux 2.6.32.2-strip ehci_hcd
Apr  6 09:02:50 machine kernel: usb usb3: SerialNumber: 0000:00:1d.7
Apr  6 09:02:50 machine kernel: usb usb3: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: hub 3-0:1.0: USB hub found
Apr  6 09:02:50 machine kernel: hub 3-0:1.0: 6 ports detected
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
Apr  6 09:02:50 machine kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:02:50 machine kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:02:50 machine kernel: usb usb4: Product: UHCI Host Controller
Apr  6 09:02:50 machine kernel: usb usb4: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:02:50 machine kernel: usb usb4: SerialNumber: 0000:00:1a.1
Apr  6 09:02:50 machine kernel: usb usb4: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: hub 4-0:1.0: USB hub found
Apr  6 09:02:50 machine kernel: hub 4-0:1.0: 2 ports detected
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
Apr  6 09:02:50 machine kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:02:50 machine kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:02:50 machine kernel: usb usb5: Product: UHCI Host Controller
Apr  6 09:02:50 machine kernel: usb usb5: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:02:50 machine kernel: usb usb5: SerialNumber: 0000:00:1d.0
Apr  6 09:02:50 machine kernel: usb usb5: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: hub 5-0:1.0: USB hub found
Apr  6 09:02:50 machine kernel: hub 5-0:1.0: 2 ports detected
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
Apr  6 09:02:50 machine kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:02:50 machine kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:02:50 machine kernel: usb usb6: Product: UHCI Host Controller
Apr  6 09:02:50 machine kernel: usb usb6: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:02:50 machine kernel: usb usb6: SerialNumber: 0000:00:1d.1
Apr  6 09:02:50 machine kernel: usb usb6: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: hub 6-0:1.0: USB hub found
Apr  6 09:02:50 machine kernel: hub 6-0:1.0: 2 ports detected
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Apr  6 09:02:50 machine kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
Apr  6 09:02:50 machine kernel: usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:02:50 machine kernel: usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:02:50 machine kernel: usb usb7: Product: UHCI Host Controller
Apr  6 09:02:50 machine kernel: usb usb7: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:02:50 machine kernel: usb usb7: SerialNumber: 0000:00:1d.2
Apr  6 09:02:50 machine kernel: usb usb7: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: hub 7-0:1.0: USB hub found
Apr  6 09:02:50 machine kernel: hub 7-0:1.0: 2 ports detected
Apr  6 09:02:50 machine kernel: iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
Apr  6 09:02:50 machine kernel: iwlagn: Copyright(c) 2003-2009 Intel Corporation
Apr  6 09:02:50 machine kernel: iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Apr  6 09:02:50 machine kernel: iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
Apr  6 09:02:50 machine kernel: iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
Apr  6 09:02:50 machine kernel: cfg80211: Regulatory domain changed to country: US
Apr  6 09:02:50 machine kernel: ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr  6 09:02:50 machine kernel: ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Apr  6 09:02:50 machine kernel: ^I(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Apr  6 09:02:50 machine kernel: ^I(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr  6 09:02:50 machine kernel: ^I(5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr  6 09:02:50 machine kernel: ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Apr  6 09:02:50 machine kernel: usb 2-2: new full speed USB device using uhci_hcd and address 2
Apr  6 09:02:50 machine kernel: usb 2-2: New USB device found, idVendor=0483, idProduct=2016
Apr  6 09:02:50 machine kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Apr  6 09:02:50 machine kernel: usb 2-2: Product: Biometric Coprocessor
Apr  6 09:02:50 machine kernel: usb 2-2: Manufacturer: STMicroelectronics
Apr  6 09:02:50 machine kernel: usb 2-2: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: usb 3-2: new high speed USB device using ehci_hcd and address 2
Apr  6 09:02:50 machine kernel: nouveau 0000:01:00.0: power state changed by ACPI to D0
Apr  6 09:02:50 machine kernel: nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086900a2)
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
Apr  6 09:02:50 machine kernel: usb 3-2: New USB device found, idVendor=03f0, idProduct=1812
Apr  6 09:02:50 machine kernel: usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr  6 09:02:50 machine kernel: usb 3-2: Product: Officejet Pro K550
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: ... appears to be valid
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: BIT BIOS found
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Bios version 60.86.3e.00
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: BIT table 'd' not found
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0:   0: 0x00000040: type 0x40 idx 0 tag 0xff
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0:   2: 0x00001231: type 0x31 idx 2 tag 0x07
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0:   3: 0x00000311: type 0x11 idx 3 tag 0xff
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02811300 00000028
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02822312 00010030
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 014333f1 0080c080
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 0000000e 00000000
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDD0F
Apr  6 09:02:50 machine kernel: usb 3-2: Manufacturer: HP
Apr  6 09:02:50 machine kernel: usb 3-2: SerialNumber: MY5AL2105T
Apr  6 09:02:50 machine kernel: usb 3-2: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE04F
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEAA4
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEB96
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xED83
Apr  6 09:02:50 machine kernel: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1812
Apr  6 09:02:50 machine kernel: usbcore: registered new interface driver usblp
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEDE8
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: 0xCE7E: parsing output script 0
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: 0xCFF4: parsing output script 0
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: 0xC66A: parsing output script 0
Apr  6 09:02:50 machine kernel: usb 4-1: new low speed USB device using uhci_hcd and address 2
Apr  6 09:02:50 machine kernel: [TTM] Zone  kernel: Available graphics memory: 1535528 kiB.
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: 128 MiB VRAM
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
Apr  6 09:02:50 machine kernel: nouveau 0000:01:00.0: firmware: requesting nouveau/nv86.ctxprog
Apr  6 09:02:50 machine kernel: usb 4-1: New USB device found, idVendor=0461, idProduct=4d62
Apr  6 09:02:50 machine kernel: usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr  6 09:02:50 machine kernel: usb 4-1: Product: HP Laser Mobile Mouse
Apr  6 09:02:50 machine kernel: usb 4-1: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: nouveau 0000:01:00.0: firmware: requesting nouveau/nv86.ctxvals
Apr  6 09:02:50 machine kernel: usbcore: registered new interface driver hiddev
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
Apr  6 09:02:50 machine kernel: input: HP Laser Mobile Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input7
Apr  6 09:02:50 machine kernel: generic-usb 0003:0461:4D62.0001: input,hidraw0: USB HID v1.11 Mouse [HP Laser Mobile Mouse] on usb-0000:00:1a.1-1/input0
Apr  6 09:02:50 machine kernel: usbcore: registered new interface driver usbhid
Apr  6 09:02:50 machine kernel: usbhid: v2.6:USB HID core driver
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 127
Apr  6 09:02:50 machine last message repeated 101 times
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: PFIFO still angry after 101 spins, halt
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Detected a LVDS output
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Detected a DAC output
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Detected a TMDS output
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Detected a LVDS connector
Apr  6 09:02:50 machine kernel: usb 6-2: new full speed USB device using uhci_hcd and address 2
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Detected a VGA connector
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
Apr  6 09:02:50 machine kernel: usb 6-2: New USB device found, idVendor=17ef, idProduct=1003
Apr  6 09:02:50 machine kernel: usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Apr  6 09:02:50 machine kernel: usb 6-2: Product: Integrated Smart Card Reader
Apr  6 09:02:50 machine kernel: usb 6-2: Manufacturer: Lenovo
Apr  6 09:02:50 machine kernel: usb 6-2: configuration #1 chosen from 1 choice
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x40210000, bo ffff8800bda82200
Apr  6 09:02:50 machine kernel: [drm] LVDS-7: set mode 1680x1050 1f
Apr  6 09:02:50 machine kernel: fb0: nouveaufb frame buffer device
Apr  6 09:02:50 machine kernel: registered panic notifier
Apr  6 09:02:50 machine kernel: [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
Apr  6 09:02:50 machine kernel: Adding 4192924k swap on /dev/sda6.  Priority:-1 extents:1 across:4192924k 
Apr  6 09:02:50 machine kernel: fuse init (API version 7.13)
Apr  6 09:02:50 machine kernel: lp: driver loaded but no devices found
Apr  6 09:02:50 machine kernel: ppdev: user-space parallel port driver
Apr  6 09:02:50 machine kernel: REISERFS (device sda5): found reiserfs format "3.6" with standard journal
Apr  6 09:02:50 machine kernel: REISERFS (device sda5): using ordered data mode
Apr  6 09:02:50 machine kernel: REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Apr  6 09:02:50 machine kernel: REISERFS (device sda5): checking transaction log (sda5)
Apr  6 09:02:50 machine kernel: REISERFS (device sda5): Using r5 hash to sort names
Apr  6 09:02:50 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig lo 127.0.0.1
Apr  6 09:02:50 machine logger: /etc/rc.d/rc.inet1:  /sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
Apr  6 09:02:50 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig eth0 82.229.182.39 broadcast 82.229.182.255 netmask 255.255.255.0
Apr  6 09:02:52 machine kernel: e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
Apr  6 09:02:52 machine kernel: 0000:00:19.0: eth0: 10/100 speed: disabling TSO
Apr  6 09:02:53 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 nick machine
Apr  6 09:02:53 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 key ************
Apr  6 09:02:54 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 key restricted
Apr  6 09:02:54 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 essid "clauxdeserignac"
Apr  6 09:02:54 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 essid "clauxdeserignac"
Apr  6 09:02:54 machine logger: /etc/rc.d/rc.inet1:  /sbin/route add default gw 82.229.182.254 metric 1
Apr  6 09:02:54 machine acpid: starting up 
Apr  6 09:02:54 machine acpid: 1 rule loaded 
Apr  6 09:02:54 machine acpid: waiting for events: event logging is off 
Apr  6 09:02:56 machine kernel: NET: Registered protocol family 10
Apr  6 09:02:56 machine kernel: lo: Disabled Privacy Extensions
Apr  6 09:02:56 machine smartd[2277]: smartd version 5.38 [x86_64-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen 
Apr  6 09:02:56 machine smartd[2277]: Home page is http://smartmontools.sourceforge.net/  
Apr  6 09:02:56 machine smartd[2277]: Opened configuration file /etc/smartd.conf 
Apr  6 09:02:56 machine smartd[2277]: Drive: DEVICESCAN, implied '-a' Directive on line 23 of file /etc/smartd.conf 
Apr  6 09:02:56 machine smartd[2277]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices 
Apr  6 09:02:56 machine smartd[2277]: Device: /dev/sda, opened 
Apr  6 09:02:56 machine smartd[2277]: Device /dev/sda: using '-d sat' for ATA disk behind SAT layer. 
Apr  6 09:02:56 machine smartd[2277]: Device: /dev/sda, opened 
Apr  6 09:02:56 machine smartd[2277]: Device: /dev/sda, not found in smartd database. 
Apr  6 09:02:57 machine smartd[2277]: Device: /dev/sda, is SMART capable. Adding to "monitor" list. 
Apr  6 09:02:57 machine smartd[2277]: Monitoring 0 ATA and 1 SCSI devices 
Apr  6 09:02:57 machine smartd[2299]: smartd has fork()ed into background mode. New PID=2299. 
Apr  6 09:03:02 machine /usr/sbin/gpm[2383]: *** info [startup.c(95)]: 
Apr  6 09:03:02 machine /usr/sbin/gpm[2383]: Started gpm successfully. Entered daemon mode.
Apr  6 09:03:02 machine hdapsd[2387]: Starting hdapsd
Apr  6 09:03:02 machine kernel: thinkpad_ec: thinkpad_ec 0.40 loaded.
Apr  6 09:03:02 machine kernel: tp_smapi 0.40 loading...
Apr  6 09:03:02 machine kernel: tp_smapi successfully loaded (smapi_port=0xb2).
Apr  6 09:03:02 machine /usr/sbin/gpm[2383]: *** info [mice.c(1766)]: 
Apr  6 09:03:02 machine /usr/sbin/gpm[2383]: imps2: Auto-detected intellimouse PS/2
Apr  6 09:03:02 machine kernel: hdaps: LENOVO ThinkPad T61 detected, setting orientation 1
Apr  6 09:03:02 machine kernel: hdaps: device successfully initialized.
Apr  6 09:03:02 machine kernel: input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input8
Apr  6 09:03:02 machine kernel: input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input9
Apr  6 09:03:02 machine kernel: hdaps: driver successfully loaded.
Apr  6 09:03:02 machine hdapsd[2387]: Selected interface: HDAPS
Apr  6 09:03:02 machine hdapsd[2387]: Selected HDAPS input device: /dev/input/event9
Apr  6 09:03:02 machine hdapsd[2432]: Could not read from /sys/devices/platform/hdaps/position: Device or resource busy
Apr  6 09:03:02 machine kernel: vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
Apr  6 09:03:02 machine hdapsd[2432]: Could not read from /sys/devices/platform/hdaps/position: Device or resource busy
Apr  6 09:03:03 machine last message repeated 3 times
Apr  6 09:03:48 machine shutdown[2473]: shutting down for system reboot
Apr  6 09:03:48 machine init: Switching to runlevel: 6
Apr  6 09:03:49 machine shutdown[2476]: shutting down for system reboot
Apr  6 09:03:51 machine logger: /etc/rc.d/rc.inet1:  /sbin/route del default
Apr  6 09:03:51 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig eth0 down
Apr  6 09:03:52 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig wlan0 down
Apr  6 09:03:52 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig lo down
Apr  6 09:03:52 machine acpid: exiting 
Apr  6 09:03:52 machine exiting on signal 15


------------------------------Starting with VGA text only console 80x25----------------------
Apr  6 09:05:02 machine syslogd 1.4.1: restart.
Apr  6 09:05:02 machine kernel: klogd 1.4.1, log source = /proc/kmsg started.
Apr  6 09:05:02 machine kernel: 3cold
Apr  6 09:05:02 machine kernel: pci 0000:15:00.3: PME# disabled
Apr  6 09:05:02 machine kernel: pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
Apr  6 09:05:02 machine kernel: pci 0000:15:00.4: PME# disabled
Apr  6 09:05:02 machine kernel: pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
Apr  6 09:05:02 machine kernel: pci 0000:15:00.5: PME# disabled
Apr  6 09:05:02 machine kernel: pci 0000:00:1e.0: transparent bridge
Apr  6 09:05:02 machine kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
Apr  6 09:05:02 machine kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
Apr  6 09:05:02 machine kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
Apr  6 09:05:02 machine kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
Apr  6 09:05:02 machine kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
Apr  6 09:05:02 machine kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
Apr  6 09:05:02 machine kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
Apr  6 09:05:02 machine kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
Apr  6 09:05:02 machine kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Apr  6 09:05:02 machine kernel: vgaarb: loaded
Apr  6 09:05:02 machine kernel: SCSI subsystem initialized
Apr  6 09:05:02 machine kernel: usbcore: registered new interface driver usbfs
Apr  6 09:05:02 machine kernel: usbcore: registered new interface driver hub
Apr  6 09:05:02 machine kernel: usbcore: registered new device driver usb
Apr  6 09:05:02 machine kernel: PCI: Using ACPI for IRQ routing
Apr  6 09:05:02 machine kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Apr  6 09:05:02 machine kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Apr  6 09:05:02 machine kernel: Switching to clocksource hpet
Apr  6 09:05:02 machine kernel: pnp: PnP ACPI init
Apr  6 09:05:02 machine kernel: ACPI: bus type pnp registered
Apr  6 09:05:02 machine kernel: pnp: PnP ACPI: found 11 devices
Apr  6 09:05:02 machine kernel: ACPI: ACPI bus type pnp unregistered
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0x0-0x9ffff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xc0000-0xc3fff has been reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xc4000-0xc7fff has been reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xc8000-0xcbfff has been reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xcc000-0xcffff has been reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xe8000-0xebfff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xec000-0xeffff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xf0000-0xfffff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0x100000-0xbeffffff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
Apr  6 09:05:02 machine kernel: system 00:02: ioport range 0x164e-0x164f has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: ioport range 0x1000-0x107f has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: ioport range 0x1180-0x11bf has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: ioport range 0x800-0x80f has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: ioport range 0x15e0-0x15ef has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: ioport range 0x1600-0x165f could not be reserved
Apr  6 09:05:02 machine kernel: system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
Apr  6 09:05:02 machine kernel: system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
Apr  6 09:05:02 machine kernel: pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xf0000000-0xefffffff]
Apr  6 09:05:02 machine kernel: pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
Apr  6 09:05:02 machine kernel: pci 0000:00:01.0:   IO window: 0x2000-0x2fff
Apr  6 09:05:02 machine kernel: pci 0000:00:01.0:   MEM window: 0xd4000000-0xd6ffffff
Apr  6 09:05:02 machine kernel: pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.0:   MEM window: 0xfc000000-0xfdffffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.0:   PREFETCH window: 0x000000f8000000-0x000000f80fffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.1:   IO window: 0x4000-0x4fff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.1:   MEM window: 0xdc100000-0xdf2fffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.1:   PREFETCH window: 0x000000dfd00000-0x000000dfdfffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.2:   IO window: 0x5000-0x5fff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.2:   MEM window: 0xd8000000-0xd9ffffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.2:   PREFETCH window: 0x000000dfa00000-0x000000dfafffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.3:   IO window: 0x6000-0x6fff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.3:   MEM window: 0xd0000000-0xd1ffffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.3:   PREFETCH window: 0x000000df700000-0x000000df7fffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.4:   IO window: 0x7000-0x7fff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.4:   MEM window: 0xcc000000-0xcdffffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.4:   PREFETCH window: 0x000000df400000-0x000000df4fffff
Apr  6 09:05:02 machine kernel: pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
Apr  6 09:05:02 machine kernel: pci 0000:15:00.0:   IO window: 0x008000-0x0080ff
Apr  6 09:05:02 machine kernel: pci 0000:15:00.0:   IO window: 0x008400-0x0084ff
Apr  6 09:05:02 machine kernel: pci 0000:15:00.0:   PREFETCH window: 0xf4000000-0xf7ffffff
Apr  6 09:05:02 machine kernel: pci 0000:15:00.0:   MEM window: 0xc0000000-0xc3ffffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
Apr  6 09:05:02 machine kernel: pci 0000:00:1e.0:   IO window: 0x8000-0xbfff
Apr  6 09:05:02 machine kernel: pci 0000:00:1e.0:   MEM window: 0xf8100000-0xfbffffff
Apr  6 09:05:02 machine kernel: pci 0000:00:1e.0:   PREFETCH window: 0x000000f4000000-0x000000f7ffffff
Apr  6 09:05:02 machine kernel: pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
Apr  6 09:05:02 machine kernel: pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr  6 09:05:02 machine kernel: pci 0000:00:1e.0: enabling device (0005 -> 0007)
Apr  6 09:05:02 machine kernel: pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:05:02 machine kernel: NET: Registered protocol family 2
Apr  6 09:05:02 machine kernel: IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Apr  6 09:05:02 machine kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Apr  6 09:05:02 machine kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Apr  6 09:05:02 machine kernel: TCP: Hash tables configured (established 262144 bind 65536)
Apr  6 09:05:02 machine kernel: TCP reno registered
Apr  6 09:05:02 machine kernel: NET: Registered protocol family 1
Apr  6 09:05:02 machine kernel: Simple Boot Flag at 0x35 set to 0x1
Apr  6 09:05:02 machine kernel: Intel AES-NI instructions are not detected.
Apr  6 09:05:02 machine kernel: VFS: Disk quotas dquot_6.5.2
Apr  6 09:05:02 machine kernel: ROMFS MTD (C) 2007 Red Hat, Inc.
Apr  6 09:05:02 machine kernel: msgmni has been set to 5997
Apr  6 09:05:02 machine kernel: alg: No test for cipher_null (cipher_null-generic)
Apr  6 09:05:02 machine kernel: alg: No test for ecb(cipher_null) (ecb-cipher_null)
Apr  6 09:05:02 machine kernel: alg: No test for digest_null (digest_null-generic)
Apr  6 09:05:02 machine kernel: alg: No test for compress_null (compress_null-generic)
Apr  6 09:05:02 machine kernel: alg: No test for fcrypt (fcrypt-generic)
Apr  6 09:05:02 machine kernel: alg: No test for stdrng (krng)
Apr  6 09:05:02 machine kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Apr  6 09:05:02 machine kernel: io scheduler noop registered
Apr  6 09:05:02 machine kernel: io scheduler anticipatory registered
Apr  6 09:05:02 machine kernel: io scheduler deadline registered
Apr  6 09:05:02 machine kernel: io scheduler cfq registered (default)
Apr  6 09:05:02 machine kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Apr  6 09:05:02 machine kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Apr  6 09:05:02 machine kernel: brd: module loaded
Apr  6 09:05:02 machine kernel: loop: module loaded
Apr  6 09:05:02 machine kernel: input: Macintosh mouse button emulation as /devices/virtual/input/input0
Apr  6 09:05:02 machine kernel: ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:05:02 machine kernel: ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
Apr  6 09:05:02 machine kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 
Apr  6 09:05:02 machine kernel: scsi0 : ahci
Apr  6 09:05:02 machine kernel: scsi1 : ahci
Apr  6 09:05:02 machine kernel: scsi2 : ahci
Apr  6 09:05:02 machine kernel: ata1: SATA max UDMA/133 irq_stat 0x00400040 irq 30, connection status changed
Apr  6 09:05:02 machine kernel: ata2: DUMMY
Apr  6 09:05:02 machine kernel: ata3: DUMMY
Apr  6 09:05:02 machine kernel: ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:05:02 machine kernel: scsi3 : ata_piix
Apr  6 09:05:02 machine kernel: scsi4 : ata_piix
Apr  6 09:05:02 machine kernel: ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
Apr  6 09:05:02 machine kernel: ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
Apr  6 09:05:02 machine kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
Apr  6 09:05:02 machine kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Apr  6 09:05:02 machine kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Apr  6 09:05:02 machine kernel: mice: PS/2 mouse device common for all mice
Apr  6 09:05:02 machine kernel: md: linear personality registered for level -1
Apr  6 09:05:02 machine kernel: md: raid0 personality registered for level 0
Apr  6 09:05:02 machine kernel: md: raid1 personality registered for level 1
Apr  6 09:05:02 machine kernel: md: raid10 personality registered for level 10
Apr  6 09:05:02 machine kernel: md: raid6 personality registered for level 6
Apr  6 09:05:02 machine kernel: md: raid5 personality registered for level 5
Apr  6 09:05:02 machine kernel: md: raid4 personality registered for level 4
Apr  6 09:05:02 machine kernel: md: multipath personality registered for level -4
Apr  6 09:05:02 machine kernel: device-mapper: uevent: version 1.0.3
Apr  6 09:05:02 machine kernel: device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Apr  6 09:05:02 machine kernel: cpuidle: using governor ladder
Apr  6 09:05:02 machine kernel: cpuidle: using governor menu
Apr  6 09:05:02 machine kernel: TCP cubic registered
Apr  6 09:05:02 machine kernel: NET: Registered protocol family 17
Apr  6 09:05:02 machine kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Apr  6 09:05:02 machine kernel: ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-U10N, 1.05, max UDMA/33
Apr  6 09:05:02 machine kernel: ata4.00: configured for UDMA/33
Apr  6 09:05:02 machine kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Apr  6 09:05:02 machine kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Apr  6 09:05:02 machine kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Apr  6 09:05:02 machine kernel: ata1.00: ATA-8: HITACHI HTS543216L9SA00, FB2ZC4EC, max UDMA/100
Apr  6 09:05:02 machine kernel: ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Apr  6 09:05:02 machine kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Apr  6 09:05:02 machine kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Apr  6 09:05:02 machine kernel: ata1.00: configured for UDMA/100
Apr  6 09:05:02 machine kernel: ata1.00: configured for UDMA/100
Apr  6 09:05:02 machine kernel: ata1: EH complete
Apr  6 09:05:02 machine kernel: scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS54321 FB2Z PQ: 0 ANSI: 5
Apr  6 09:05:02 machine kernel: sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Apr  6 09:05:02 machine kernel: sd 0:0:0:0: [sda] Write Protect is off
Apr  6 09:05:02 machine kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr  6 09:05:02 machine kernel:  sda:
Apr  6 09:05:02 machine kernel: scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-U10N  1.05 PQ: 0 ANSI: 5
Apr  6 09:05:02 machine kernel: Uniform CD-ROM driver Revision: 3.20
Apr  6 09:05:02 machine kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Apr  6 09:05:02 machine kernel: md: Waiting for all devices to be available before autodetect
Apr  6 09:05:02 machine kernel: md: If you don't use raid, use raid=noautodetect
Apr  6 09:05:02 machine kernel: md: Autodetecting RAID arrays.
Apr  6 09:05:02 machine kernel: md: Scanned 0 and added 0 devices.
Apr  6 09:05:02 machine kernel: md: autorun ...
Apr  6 09:05:02 machine kernel: md: ... autorun DONE.
Apr  6 09:05:02 machine kernel: REISERFS (device sda4): found reiserfs format "3.6" with standard journal
Apr  6 09:05:02 machine kernel: REISERFS (device sda4): using ordered data mode
Apr  6 09:05:02 machine kernel: REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Apr  6 09:05:02 machine kernel: REISERFS (device sda4): checking transaction log (sda4)
Apr  6 09:05:02 machine kernel: REISERFS (device sda4): Using r5 hash to sort names
Apr  6 09:05:02 machine kernel: devtmpfs: mounted
Apr  6 09:05:02 machine kernel: Freeing unused kernel memory: 576k freed
Apr  6 09:05:02 machine kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Apr  6 09:05:02 machine kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Apr  6 09:05:02 machine kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:05:02 machine kernel: usb usb1: Product: EHCI Host Controller
Apr  6 09:05:02 machine kernel: usb usb1: Manufacturer: Linux 2.6.32.2-strip ehci_hcd
Apr  6 09:05:02 machine kernel: usb usb1: SerialNumber: 0000:00:1a.7
Apr  6 09:05:02 machine kernel: usb usb1: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: hub 1-0:1.0: USB hub found
Apr  6 09:05:02 machine kernel: hub 1-0:1.0: 4 ports detected
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1d.7: debug port 1
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
Apr  6 09:05:02 machine kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Apr  6 09:05:02 machine kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Apr  6 09:05:02 machine kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:05:02 machine kernel: usb usb2: Product: EHCI Host Controller
Apr  6 09:05:02 machine kernel: usb usb2: Manufacturer: Linux 2.6.32.2-strip ehci_hcd
Apr  6 09:05:02 machine kernel: usb usb2: SerialNumber: 0000:00:1d.7
Apr  6 09:05:02 machine kernel: usb usb2: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: hub 2-0:1.0: USB hub found
Apr  6 09:05:02 machine kernel: hub 2-0:1.0: 6 ports detected
Apr  6 09:05:02 machine kernel: e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
Apr  6 09:05:02 machine kernel: e1000e: Copyright (c) 1999-2008 Intel Corporation.
Apr  6 09:05:02 machine kernel: e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr  6 09:05:02 machine kernel: cfg80211: Using static regulatory domain info
Apr  6 09:05:02 machine kernel: cfg80211: Regulatory domain: US
Apr  6 09:05:02 machine kernel: ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr  6 09:05:02 machine kernel: ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
Apr  6 09:05:02 machine kernel: ^I(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Apr  6 09:05:02 machine kernel: ^I(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Apr  6 09:05:02 machine kernel: ^I(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Apr  6 09:05:02 machine kernel: ^I(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Apr  6 09:05:02 machine kernel: ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
Apr  6 09:05:02 machine kernel: cfg80211: Calling CRDA for country: US
Apr  6 09:05:02 machine kernel: Non-volatile memory driver v1.3
Apr  6 09:05:02 machine kernel: 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:e2:1a:ea:c0
Apr  6 09:05:02 machine kernel: 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
Apr  6 09:05:02 machine kernel: 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1008ff-0ff
Apr  6 09:05:02 machine kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Apr  6 09:05:02 machine kernel: sr 3:0:0:0: Attached scsi generic sg1 type 5
Apr  6 09:05:02 machine kernel: Linux agpgart interface v0.103
Apr  6 09:05:02 machine kernel: usb 2-2: new high speed USB device using ehci_hcd and address 2
Apr  6 09:05:02 machine kernel: uhci_hcd: USB Universal Host Controller Interface driver
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
Apr  6 09:05:02 machine kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:05:02 machine kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:05:02 machine kernel: usb usb3: Product: UHCI Host Controller
Apr  6 09:05:02 machine kernel: usb usb3: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:05:02 machine kernel: usb usb3: SerialNumber: 0000:00:1a.0
Apr  6 09:05:02 machine kernel: usb usb3: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: hub 3-0:1.0: USB hub found
Apr  6 09:05:02 machine kernel: hub 3-0:1.0: 2 ports detected
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
Apr  6 09:05:02 machine kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:05:02 machine kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:05:02 machine kernel: usb usb4: Product: UHCI Host Controller
Apr  6 09:05:02 machine kernel: usb usb4: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:05:02 machine kernel: usb usb4: SerialNumber: 0000:00:1a.1
Apr  6 09:05:02 machine kernel: usb usb4: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: hub 4-0:1.0: USB hub found
Apr  6 09:05:02 machine kernel: hub 4-0:1.0: 2 ports detected
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
Apr  6 09:05:02 machine kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:05:02 machine kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:05:02 machine kernel: usb usb5: Product: UHCI Host Controller
Apr  6 09:05:02 machine kernel: usb usb5: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:05:02 machine kernel: usb usb5: SerialNumber: 0000:00:1d.0
Apr  6 09:05:02 machine kernel: usb usb5: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: hub 5-0:1.0: USB hub found
Apr  6 09:05:02 machine kernel: hub 5-0:1.0: 2 ports detected
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
Apr  6 09:05:02 machine kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:05:02 machine kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:05:02 machine kernel: usb usb6: Product: UHCI Host Controller
Apr  6 09:05:02 machine kernel: usb usb6: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:05:02 machine kernel: usb usb6: SerialNumber: 0000:00:1d.1
Apr  6 09:05:02 machine kernel: usb usb6: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: hub 6-0:1.0: USB hub found
Apr  6 09:05:02 machine kernel: hub 6-0:1.0: 2 ports detected
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Apr  6 09:05:02 machine kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
Apr  6 09:05:02 machine kernel: usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Apr  6 09:05:02 machine kernel: usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr  6 09:05:02 machine kernel: usb usb7: Product: UHCI Host Controller
Apr  6 09:05:02 machine kernel: usb usb7: Manufacturer: Linux 2.6.32.2-strip uhci_hcd
Apr  6 09:05:02 machine kernel: usb usb7: SerialNumber: 0000:00:1d.2
Apr  6 09:05:02 machine kernel: usb usb7: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: hub 7-0:1.0: USB hub found
Apr  6 09:05:02 machine kernel: hub 7-0:1.0: 2 ports detected
Apr  6 09:05:02 machine kernel: ricoh-mmc: Ricoh MMC Controller disabling driver
Apr  6 09:05:02 machine kernel: ricoh-mmc: Copyright(c) Philip Langdale
Apr  6 09:05:02 machine kernel: ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11)
Apr  6 09:05:02 machine kernel: ricoh-mmc: Controller is now disabled.
Apr  6 09:05:02 machine kernel: usb 2-2: New USB device found, idVendor=03f0, idProduct=1812
Apr  6 09:05:02 machine kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr  6 09:05:02 machine kernel: usb 2-2: Product: Officejet Pro K550
Apr  6 09:05:02 machine kernel: usb 2-2: Manufacturer: HP
Apr  6 09:05:02 machine kernel: usb 2-2: SerialNumber: MY5AL2105T
Apr  6 09:05:02 machine kernel: usb 2-2: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
Apr  6 09:05:02 machine kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
Apr  6 09:05:02 machine kernel: ACPI: Lid Switch [LID]
Apr  6 09:05:02 machine kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
Apr  6 09:05:02 machine kernel: ACPI: Sleep Button [SLPB]
Apr  6 09:05:02 machine kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
Apr  6 09:05:02 machine kernel: ACPI: Power Button [PWRF]
Apr  6 09:05:02 machine kernel: ACPI: AC Adapter [AC] (on-line)
Apr  6 09:05:02 machine kernel: ACPI: Battery Slot [BAT0] (battery present)
Apr  6 09:05:02 machine kernel: yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
Apr  6 09:05:02 machine kernel: yenta_cardbus 0000:15:00.0: Socket status: 30000006
Apr  6 09:05:02 machine kernel: yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff
Apr  6 09:05:02 machine kernel: yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff
Apr  6 09:05:02 machine kernel: yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
Apr  6 09:05:02 machine kernel: usb 3-2: new full speed USB device using uhci_hcd and address 2
Apr  6 09:05:02 machine kernel: ACPI: WMI: Mapper loaded
Apr  6 09:05:02 machine kernel: i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Apr  6 09:05:02 machine kernel: usb 3-2: New USB device found, idVendor=0483, idProduct=2016
Apr  6 09:05:02 machine kernel: usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Apr  6 09:05:02 machine kernel: usb 3-2: Product: Biometric Coprocessor
Apr  6 09:05:02 machine kernel: usb 3-2: Manufacturer: STMicroelectronics
Apr  6 09:05:02 machine kernel: usb 3-2: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1812
Apr  6 09:05:02 machine kernel: usbcore: registered new interface driver usblp
Apr  6 09:05:02 machine kernel: sdhci: Secure Digital Host Controller Interface driver
Apr  6 09:05:02 machine kernel: sdhci: Copyright(c) Pierre Ossman
Apr  6 09:05:02 machine kernel: usb 4-1: new low speed USB device using uhci_hcd and address 2
Apr  6 09:05:02 machine kernel: rtc_cmos 00:07: RTC can wake from S4
Apr  6 09:05:02 machine kernel: rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
Apr  6 09:05:02 machine kernel: rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Apr  6 09:05:02 machine kernel: ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr  6 09:05:02 machine kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[f8101000-f81017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
Apr  6 09:05:02 machine kernel: thermal LNXTHERM:01: registered as thermal_zone0
Apr  6 09:05:02 machine kernel: ACPI: Thermal Zone [THM0] (60 C)
Apr  6 09:05:02 machine kernel: thermal LNXTHERM:02: registered as thermal_zone1
Apr  6 09:05:02 machine kernel: ACPI: Thermal Zone [THM1] (53 C)
Apr  6 09:05:02 machine kernel: acpi device:05: registered as cooling_device0
Apr  6 09:05:02 machine kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:04/LNXVIDEO:01/input/input5
Apr  6 09:05:02 machine kernel: ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
Apr  6 09:05:02 machine kernel: usb 4-1: New USB device found, idVendor=0461, idProduct=4d62
Apr  6 09:05:02 machine kernel: usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr  6 09:05:02 machine kernel: usb 4-1: Product: HP Laser Mobile Mouse
Apr  6 09:05:02 machine kernel: usb 4-1: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr  6 09:05:02 machine kernel: hda_intel: probe_mask set to 0x1 for device 17aa:20ac
Apr  6 09:05:02 machine kernel: sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
Apr  6 09:05:02 machine kernel: sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr  6 09:05:02 machine kernel: Registered led device: mmc0::
Apr  6 09:05:02 machine kernel: mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
Apr  6 09:05:02 machine kernel: thinkpad_acpi: ThinkPad ACPI Extras v0.23
Apr  6 09:05:02 machine kernel: thinkpad_acpi: http://ibm-acpi.sf.net/
Apr  6 09:05:02 machine kernel: thinkpad_acpi: ThinkPad BIOS 7LETC5WW (2.25 ), EC 7KHT24WW-1.08
Apr  6 09:05:02 machine kernel: thinkpad_acpi: Lenovo ThinkPad T61, model 64574XG
Apr  6 09:05:02 machine kernel: thinkpad_acpi: ACPI backlight control delay disabled
Apr  6 09:05:02 machine kernel: thinkpad_acpi: radio switch found; radios are disabled
Apr  6 09:05:02 machine kernel: thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
Apr  6 09:05:02 machine kernel: thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
Apr  6 09:05:02 machine kernel: Registered led device: tpacpi::thinklight
Apr  6 09:05:02 machine kernel: Registered led device: tpacpi::power
Apr  6 09:05:02 machine kernel: Registered led device: tpacpi::standby
Apr  6 09:05:02 machine kernel: Registered led device: tpacpi::thinkvantage
Apr  6 09:05:02 machine kernel: thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
Apr  6 09:05:02 machine kernel: input: ThinkPad Extra Buttons as /devices/virtual/input/input6
Apr  6 09:05:02 machine kernel: usb 6-2: new full speed USB device using uhci_hcd and address 2
Apr  6 09:05:02 machine kernel: [drm] Initialized drm 1.1.0 20060810
Apr  6 09:05:02 machine kernel: usbcore: registered new interface driver hiddev
Apr  6 09:05:02 machine kernel: input: HP Laser Mobile Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input7
Apr  6 09:05:02 machine kernel: generic-usb 0003:0461:4D62.0001: input,hidraw0: USB HID v1.11 Mouse [HP Laser Mobile Mouse] on usb-0000:00:1a.1-1/input0
Apr  6 09:05:02 machine kernel: usbcore: registered new interface driver usbhid
Apr  6 09:05:02 machine kernel: usbhid: v2.6:USB HID core driver
Apr  6 09:05:02 machine kernel: processor LNXCPU:00: registered as cooling_device1
Apr  6 09:05:02 machine kernel: usb 6-2: New USB device found, idVendor=17ef, idProduct=1003
Apr  6 09:05:02 machine kernel: usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Apr  6 09:05:02 machine kernel: usb 6-2: Product: Integrated Smart Card Reader
Apr  6 09:05:02 machine kernel: usb 6-2: Manufacturer: Lenovo
Apr  6 09:05:02 machine kernel: usb 6-2: configuration #1 chosen from 1 choice
Apr  6 09:05:02 machine kernel: processor LNXCPU:01: registered as cooling_device2
Apr  6 09:05:02 machine kernel: iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
Apr  6 09:05:02 machine kernel: iwlagn: Copyright(c) 2003-2009 Intel Corporation
Apr  6 09:05:02 machine kernel: iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Apr  6 09:05:02 machine kernel: iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
Apr  6 09:05:02 machine kernel: iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
Apr  6 09:05:02 machine kernel: cfg80211: Regulatory domain changed to country: US
Apr  6 09:05:02 machine kernel: ^I(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr  6 09:05:02 machine kernel: ^I(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
Apr  6 09:05:02 machine kernel: ^I(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
Apr  6 09:05:02 machine kernel: ^I(5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr  6 09:05:02 machine kernel: ^I(5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr  6 09:05:02 machine kernel: ^I(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
Apr  6 09:05:02 machine kernel: nouveau 0000:01:00.0: power state changed by ACPI to D0
Apr  6 09:05:02 machine kernel: nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086900a2)
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: ... appears to be valid
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: BIT BIOS found
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Bios version 60.86.3e.00
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: BIT table 'd' not found
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0:   0: 0x00000040: type 0x40 idx 0 tag 0xff
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0:   2: 0x00001231: type 0x31 idx 2 tag 0x07
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0:   3: 0x00000311: type 0x11 idx 3 tag 0xff
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02811300 00000028
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02822312 00010030
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 014333f1 0080c080
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 0000000e 00000000
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDD0F
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE04F
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEAA4
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEB96
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xED83
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEDE8
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: 0xCE7E: parsing output script 0
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: 0xCFF4: parsing output script 0
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: 0xC66A: parsing output script 0
Apr  6 09:05:02 machine kernel: [TTM] Zone  kernel: Available graphics memory: 1535528 kiB.
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: 128 MiB VRAM
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
Apr  6 09:05:02 machine kernel: nouveau 0000:01:00.0: firmware: requesting nouveau/nv86.ctxprog
Apr  6 09:05:02 machine kernel: nouveau 0000:01:00.0: firmware: requesting nouveau/nv86.ctxvals
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Detected a LVDS output
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Detected a DAC output
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Detected a TMDS output
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Detected a LVDS connector
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Detected a VGA connector
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x40210000, bo ffff8800bc81ae00
Apr  6 09:05:02 machine kernel: [drm] LVDS-7: set mode 1680x1050 1f
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: 0xCE82: parsing output script 1
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: 0xCD07: parsing clock script 0
Apr  6 09:05:02 machine kernel: fb0: nouveaufb frame buffer device
Apr  6 09:05:02 machine kernel: registered panic notifier
Apr  6 09:05:02 machine kernel: [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: 0xCE41: parsing clock script 1
Apr  6 09:05:02 machine kernel: Adding 4192924k swap on /dev/sda6.  Priority:-1 extents:1 across:4192924k 
Apr  6 09:05:02 machine kernel: fuse init (API version 7.13)
Apr  6 09:05:02 machine kernel: lp: driver loaded but no devices found
Apr  6 09:05:02 machine kernel: ppdev: user-space parallel port driver
Apr  6 09:05:02 machine kernel: REISERFS (device sda5): found reiserfs format "3.6" with standard journal
Apr  6 09:05:02 machine kernel: REISERFS (device sda5): using ordered data mode
Apr  6 09:05:02 machine kernel: REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Apr  6 09:05:02 machine kernel: REISERFS (device sda5): checking transaction log (sda5)
Apr  6 09:05:02 machine kernel: REISERFS (device sda5): Using r5 hash to sort names
Apr  6 09:05:02 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig lo 127.0.0.1
Apr  6 09:05:02 machine logger: /etc/rc.d/rc.inet1:  /sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo
Apr  6 09:05:02 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig eth0 82.229.182.39 broadcast 82.229.182.255 netmask 255.255.255.0
Apr  6 09:05:04 machine kernel: e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
Apr  6 09:05:04 machine kernel: 0000:00:19.0: eth0: 10/100 speed: disabling TSO
Apr  6 09:05:05 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 nick machine
Apr  6 09:05:05 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 key ************
Apr  6 09:05:05 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 key restricted
Apr  6 09:05:05 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 essid "clauxdeserignac"
Apr  6 09:05:06 machine logger: /etc/rc.d/rc.M:  /sbin/iwconfig wlan0 essid "clauxdeserignac"
Apr  6 09:05:06 machine logger: /etc/rc.d/rc.inet1:  /sbin/route add default gw 82.229.182.254 metric 1
Apr  6 09:05:06 machine acpid: starting up 
Apr  6 09:05:06 machine acpid: 1 rule loaded 
Apr  6 09:05:06 machine acpid: waiting for events: event logging is off 
Apr  6 09:05:08 machine kernel: NET: Registered protocol family 10
Apr  6 09:05:08 machine kernel: lo: Disabled Privacy Extensions
Apr  6 09:05:08 machine smartd[2232]: smartd version 5.38 [x86_64-slackware-linux-gnu] Copyright (C) 2002-8 Bruce Allen 
Apr  6 09:05:08 machine smartd[2232]: Home page is http://smartmontools.sourceforge.net/  
Apr  6 09:05:08 machine smartd[2232]: Opened configuration file /etc/smartd.conf 
Apr  6 09:05:08 machine smartd[2232]: Drive: DEVICESCAN, implied '-a' Directive on line 23 of file /etc/smartd.conf 
Apr  6 09:05:08 machine smartd[2232]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices 
Apr  6 09:05:08 machine smartd[2232]: Device: /dev/sda, opened 
Apr  6 09:05:08 machine smartd[2232]: Device /dev/sda: using '-d sat' for ATA disk behind SAT layer. 
Apr  6 09:05:08 machine smartd[2232]: Device: /dev/sda, opened 
Apr  6 09:05:08 machine smartd[2232]: Device: /dev/sda, not found in smartd database. 
Apr  6 09:05:09 machine smartd[2232]: Device: /dev/sda, is SMART capable. Adding to "monitor" list. 
Apr  6 09:05:09 machine smartd[2232]: Monitoring 0 ATA and 1 SCSI devices 
Apr  6 09:05:09 machine smartd[2254]: smartd has fork()ed into background mode. New PID=2254. 
Apr  6 09:05:14 machine /usr/sbin/gpm[2338]: *** info [startup.c(95)]: 
Apr  6 09:05:14 machine /usr/sbin/gpm[2338]: Started gpm successfully. Entered daemon mode.
Apr  6 09:05:14 machine hdapsd[2342]: Starting hdapsd
Apr  6 09:05:14 machine kernel: thinkpad_ec: thinkpad_ec 0.40 loaded.
Apr  6 09:05:14 machine kernel: tp_smapi 0.40 loading...
Apr  6 09:05:14 machine kernel: tp_smapi successfully loaded (smapi_port=0xb2).
Apr  6 09:05:14 machine /usr/sbin/gpm[2338]: *** info [mice.c(1766)]: 
Apr  6 09:05:14 machine /usr/sbin/gpm[2338]: imps2: Auto-detected intellimouse PS/2
Apr  6 09:05:14 machine kernel: hdaps: LENOVO ThinkPad T61 detected, setting orientation 1
Apr  6 09:05:14 machine kernel: hdaps: device successfully initialized.
Apr  6 09:05:14 machine kernel: input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input8
Apr  6 09:05:14 machine kernel: input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input9
Apr  6 09:05:14 machine kernel: hdaps: driver successfully loaded.
Apr  6 09:05:14 machine hdapsd[2342]: Selected interface: HDAPS
Apr  6 09:05:14 machine hdapsd[2342]: Selected HDAPS input device: /dev/input/event9
Apr  6 09:05:14 machine hdapsd[2387]: Could not read from /sys/devices/platform/hdaps/position: Device or resource busy
Apr  6 09:05:14 machine kernel: vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
Apr  6 09:05:14 machine hdapsd[2387]: Could not read from /sys/devices/platform/hdaps/position: Device or resource busy
Apr  6 09:05:15 machine last message repeated 4 times
Apr  6 09:05:36 machine acpid: client connected from 2459[0:100] 
Apr  6 09:05:36 machine acpid: 1 client rule loaded 
Apr  6 09:05:37 machine kernel: [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
Apr  6 09:05:37 machine kernel: [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
Apr  6 09:24:11 machine hdapsd[2387]: parking
Apr  6 09:24:12 machine hdapsd[2387]: un-parking
Apr  6 09:26:47 machine hdapsd[2387]: parking
Apr  6 09:26:48 machine hdapsd[2387]: un-parking
Apr  6 09:30:25 machine hdapsd[2387]: parking
Apr  6 09:30:26 machine hdapsd[2387]: un-parking
Apr  6 09:32:00 machine kernel: usblp0: removed
Apr  6 09:43:11 machine hdapsd[2387]: parking
Apr  6 09:43:12 machine hdapsd[2387]: un-parking
Apr  6 09:55:31 machine hdapsd[2387]: parking
Apr  6 09:55:32 machine hdapsd[2387]: un-parking
Apr  6 09:55:40 machine hdapsd[2387]: parking
Apr  6 09:55:42 machine hdapsd[2387]: un-parking
Apr  6 09:58:58 machine kernel: [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 2
Apr  6 09:59:00 machine /usr/sbin/gpm[2338]: *** info [mice.c(1766)]: 
Apr  6 09:59:00 machine /usr/sbin/gpm[2338]: imps2: Auto-detected intellimouse PS/2
Apr  6 09:59:04 machine shutdown[5842]: shutting down for system reboot
Apr  6 09:59:04 machine init: Switching to runlevel: 6
Apr  6 09:59:13 machine logger: /etc/rc.d/rc.inet1:  /sbin/route del default
Apr  6 09:59:13 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig eth0 down
Apr  6 09:59:13 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig wlan0 down
Apr  6 09:59:13 machine logger: /etc/rc.d/rc.inet1:  /sbin/ifconfig lo down
Apr  6 09:59:13 machine acpid: exiting 
Apr  6 09:59:14 machine exiting on signal 15


[-- Attachment #3: syslog --]
[-- Type: text/plain, Size: 5375 bytes --]



----------------------------Starting with VESA framebuffer console 1680x1050----------------------
Apr  6 09:02:50 machine kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Apr  6 09:02:50 machine kernel: Console: switching to colour frame buffer device 210x65
Apr  6 09:02:50 machine kernel: floppy0: no floppy controllers found
Apr  6 09:02:50 machine kernel:  sda1 sda2 sda3 < sda5 sda6 > sda4
Apr  6 09:02:50 machine kernel: registered taskstats version 1
Apr  6 09:02:50 machine kernel: VFS: Mounted root (reiserfs filesystem) readonly on device 8:4.
Apr  6 09:02:50 machine kernel: Driver 'rtc_cmos' needs updating - please use bus_type methods
Apr  6 09:02:50 machine kernel: ACPI: SSDT 00000000beee1b32 002C4 (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
Apr  6 09:02:50 machine kernel: ACPI: SSDT 00000000beee1e7b 0085E (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
Apr  6 09:02:50 machine kernel: ACPI: SSDT 00000000beee1a6a 000C8 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
Apr  6 09:02:50 machine kernel: ACPI: SSDT 00000000beee1df6 00085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
Apr  6 09:02:50 machine kernel: sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: 0xEDE8: Condition still not met after 20ms, skipping following opcodes
Apr  6 09:02:50 machine kernel: [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
Apr  6 09:02:50 machine kernel: fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
Apr  6 09:02:50 machine kernel: Console: switching to colour dummy device 80x25
Apr  6 09:02:50 machine kernel: Console: switching to colour frame buffer device 210x65
Apr  6 09:02:56 machine smartd[2277]: Problem creating device name scan list 
Apr  6 09:03:02 machine kernel: vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
Apr  6 09:03:02 machine kernel: vboxdrv: counter framework which can generate NMIs is active. You have to prevent
Apr  6 09:03:02 machine kernel: vboxdrv: the usage of hardware performance counters by
Apr  6 09:03:02 machine kernel: vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
Apr  6 09:03:02 machine kernel: VBoxDrv: dbg - g_abExecMemory=ffffffffa056a500
Apr  6 09:03:02 machine kernel: vboxdrv: fAsync=1 offMin=0x6111b offMax=0x6111b


---------------------Starting with text VGA text only console 80x25-------------------------------
Apr  6 09:05:02 machine kernel: raid6: int64x1   1746 MB/s
Apr  6 09:05:02 machine kernel: raid6: int64x2   2417 MB/s
Apr  6 09:05:02 machine kernel: raid6: int64x4   1816 MB/s
Apr  6 09:05:02 machine kernel: raid6: int64x8   1644 MB/s
Apr  6 09:05:02 machine kernel: raid6: sse2x1    3531 MB/s
Apr  6 09:05:02 machine kernel: raid6: sse2x2    3804 MB/s
Apr  6 09:05:02 machine kernel: raid6: sse2x4    6531 MB/s
Apr  6 09:05:02 machine kernel: raid6: using algorithm sse2x4 (6531 MB/s)
Apr  6 09:05:02 machine kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Apr  6 09:05:02 machine kernel: floppy0: no floppy controllers found
Apr  6 09:05:02 machine kernel: sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Apr  6 09:05:02 machine kernel:  sda1 sda2 sda3 < sda5 sda6 > sda4
Apr  6 09:05:02 machine kernel: registered taskstats version 1
Apr  6 09:05:02 machine kernel: VFS: Mounted root (reiserfs filesystem) readonly on device 8:4.
Apr  6 09:05:02 machine kernel: Driver 'rtc_cmos' needs updating - please use bus_type methods
Apr  6 09:05:02 machine kernel: sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
Apr  6 09:05:02 machine kernel: ACPI: SSDT 00000000beee1b32 002C4 (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
Apr  6 09:05:02 machine kernel: ACPI: SSDT 00000000beee1e7b 0085E (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
Apr  6 09:05:02 machine kernel: ACPI: SSDT 00000000beee1a6a 000C8 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
Apr  6 09:05:02 machine kernel: ACPI: 
Apr  6 09:05:02 machine kernel: SSDT 00000000beee1df6 00085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: 0xEDE8: Condition still not met after 20ms, skipping following opcodes
Apr  6 09:05:02 machine kernel: [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
Apr  6 09:05:02 machine kernel: Console: switching to colour frame buffer device 210x65
Apr  6 09:05:08 machine smartd[2232]: Problem creating device name scan list 
Apr  6 09:05:14 machine kernel: vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
Apr  6 09:05:14 machine kernel: vboxdrv: counter framework which can generate NMIs is active. You have to prevent
Apr  6 09:05:14 machine kernel: vboxdrv: the usage of hardware performance counters by
Apr  6 09:05:14 machine kernel: vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
Apr  6 09:05:14 machine kernel: VBoxDrv: dbg - g_abExecMemory=ffffffffa056a500
Apr  6 09:05:14 machine kernel: vboxdrv: fAsync=1 offMin=0x61265 offMax=0x61265
Apr  6 09:05:15 machine kernel: CE: hpet increasing min_delta_ns to 15000 nsec

[-- Attachment #4: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau