* All the syslogs @ 2010-05-06 6:04 Steffen Sledz 2010-05-06 6:13 ` Koen Kooi 0 siblings, 1 reply; 21+ messages in thread From: Steffen Sledz @ 2010-05-06 6:04 UTC (permalink / raw) To: openembedded-devel Since i added the recipe for rsyslog we have three different syslog implemenations in OE: (busybox-)syslog, syslog-ng, and rsyslog. At the moment syslog-ng and rsyslog have pkg_postinst and pkg_postrm stages which use update-rc.d to deinstall/reinstall init.d links for (busybox-)syslog which is default. This seems to be a bad hack for me. I believe there must be better solutions for this situation. But I'm not sure which is the preferred. Is this a case for alternatives? Or something like DISTRO_SYSLOG_DAEMON? Or something else? Steffen -- Steffen Sledz DResearch Digital Media Systems GmbH Otto-Schmirgal-Str.3, D-10319 Berlin, Germany Tel: +49 (30) 515932237 mailto:sledz@DResearch.DE Fax: +49 (30) 515932299 http://www.DResearch.DE Geschäftsführer: Dr. Michael Weber, Werner Mögle; Amtsgericht Berlin Charlottenburg; HRB 54412; Ust.-IDNr. DE169013825; WEEE Reg.-Nr. DE 85995642 ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: All the syslogs 2010-05-06 6:04 All the syslogs Steffen Sledz @ 2010-05-06 6:13 ` Koen Kooi 2010-05-07 7:46 ` Steffen Sledz 0 siblings, 1 reply; 21+ messages in thread From: Koen Kooi @ 2010-05-06 6:13 UTC (permalink / raw) To: openembedded-devel -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 06-05-10 08:04, Steffen Sledz wrote: > Since i added the recipe for rsyslog we have three different > syslog implemenations in OE: (busybox-)syslog, syslog-ng, and > rsyslog. > > At the moment syslog-ng and rsyslog have pkg_postinst and pkg_postrm > stages which use update-rc.d to deinstall/reinstall init.d links > for (busybox-)syslog which is default. > > This seems to be a bad hack for me. I believe there must be better > solutions for this situation. But I'm not sure which is the preferred. > Is this a case for alternatives? Or something like > DISTRO_SYSLOG_DAEMON? Or something else? DISTRO_* is the wrong namespace for that, it's a per-image choice. You could have a look at using u-a to changing initscripts and binaries. regards, Koen -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (Darwin) iD8DBQFL4l4hMkyGM64RGpERAmQGAKCnBaQCn4e8UJw7I4M+pbIJKVDUPACfa+fR WHGvccUmsPf+1TDjDjiKtJ0= =U2rv -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: All the syslogs 2010-05-06 6:13 ` Koen Kooi @ 2010-05-07 7:46 ` Steffen Sledz 2010-05-07 10:59 ` Steffen Sledz 0 siblings, 1 reply; 21+ messages in thread From: Steffen Sledz @ 2010-05-07 7:46 UTC (permalink / raw) To: openembedded-devel Am 06.05.2010 08:13, wrote Koen Kooi: >> Since i added the recipe for rsyslog we have three different >> syslog implemenations in OE: (busybox-)syslog, syslog-ng, and >> rsyslog. > >> At the moment syslog-ng and rsyslog have pkg_postinst and pkg_postrm >> stages which use update-rc.d to deinstall/reinstall init.d links >> for (busybox-)syslog which is default. > >> This seems to be a bad hack for me. I believe there must be better >> solutions for this situation. But I'm not sure which is the preferred. >> Is this a case for alternatives? Or something like >> DISTRO_SYSLOG_DAEMON? Or something else? > > DISTRO_* is the wrong namespace for that, it's a per-image choice. You > could have a look at using u-a to changing initscripts and binaries. OK, than i'll try to create an u-a setting for all the syslogs (btw: we have not three but four different ones, there's sysklogd too). Has anyone combined update-alternatives and update-rc.d for initscripts before? I'm afraid there are some pitfalls in the naming of the initscript itself and the symlinks. Regards, Steffen ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: All the syslogs 2010-05-07 7:46 ` Steffen Sledz @ 2010-05-07 10:59 ` Steffen Sledz 2010-05-07 11:09 ` Martin Jansa 0 siblings, 1 reply; 21+ messages in thread From: Steffen Sledz @ 2010-05-07 10:59 UTC (permalink / raw) To: openembedded-devel > OK, than i'll try to create an u-a setting for all the syslogs (btw: we > have not three but four different ones, there's sysklogd too). > > Has anyone combined update-alternatives and update-rc.d for initscripts > before? I'm afraid there are some pitfalls in the naming of the initscript > itself and the symlinks. I made some first tests and they confirmed my fears. :( The recipes look like this: -------------------->snip<--------------------------- inherit autotools update-rc.d do_install_append() { ... install -m 755 ${WORKDIR}/initscript ${D}/${sysconfdir}/init.d/syslog.${PN} } pkg_postinst_${PN} () { update-alternatives --install ${sysconfdir}/init.d/syslog syslog-init syslog.${PN} 300 } pkg_prerm_${PN} () { update-alternatives --remove syslog-init syslog.${PN} } INITSCRIPT_NAME = "syslog" -------------------->snip<--------------------------- When opkg installs the packages it wants to run update-rc.d *before* update-alternatives. This results in an "file does not exist" error. :( Installing rsyslog (5.5.4-r1.0.5) to root... Installing busybox-syslog (1.13.2-r24.1.5) to root... Configuring rsyslog update-rc.d: /etc/init.d/syslog: file does not exist update-alternatives: Linking //etc/init.d/syslog to syslog.rsyslog Any suggestions? Regards, Steffen -- Steffen Sledz DResearch Digital Media Systems GmbH Otto-Schmirgal-Str.3, D-10319 Berlin, Germany Tel: +49 (30) 515932237 mailto:sledz@DResearch.DE Fax: +49 (30) 515932299 http://www.DResearch.DE Geschäftsführer: Dr. Michael Weber, Werner Mögle; Amtsgericht Berlin Charlottenburg; HRB 54412; Ust.-IDNr. DE169013825; WEEE Reg.-Nr. DE 85995642 ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: All the syslogs 2010-05-07 10:59 ` Steffen Sledz @ 2010-05-07 11:09 ` Martin Jansa 2010-05-07 13:02 ` Steffen Sledz 0 siblings, 1 reply; 21+ messages in thread From: Martin Jansa @ 2010-05-07 11:09 UTC (permalink / raw) To: openembedded-devel On Fri, May 07, 2010 at 12:59:58PM +0200, Steffen Sledz wrote: > > OK, than i'll try to create an u-a setting for all the syslogs (btw: we > > have not three but four different ones, there's sysklogd too). > > > > Has anyone combined update-alternatives and update-rc.d for initscripts > > before? I'm afraid there are some pitfalls in the naming of the initscript > > itself and the symlinks. > > I made some first tests and they confirmed my fears. :( > > The recipes look like this: > > -------------------->snip<--------------------------- > inherit autotools update-rc.d > > do_install_append() { > ... > install -m 755 ${WORKDIR}/initscript ${D}/${sysconfdir}/init.d/syslog.${PN} > } > > pkg_postinst_${PN} () { > update-alternatives --install ${sysconfdir}/init.d/syslog syslog-init syslog.${PN} 300 > } > > pkg_prerm_${PN} () { > update-alternatives --remove syslog-init syslog.${PN} > } > > INITSCRIPT_NAME = "syslog" > -------------------->snip<--------------------------- > > When opkg installs the packages it wants to run update-rc.d *before* > update-alternatives. This results in an "file does not exist" error. :( > > Installing rsyslog (5.5.4-r1.0.5) to root... > Installing busybox-syslog (1.13.2-r24.1.5) to root... > Configuring rsyslog > update-rc.d: /etc/init.d/syslog: file does not exist > update-alternatives: Linking //etc/init.d/syslog to syslog.rsyslog > Any suggestions? If there is only one u-a file in recipe you can try inherit update-alternatives to see if it will generate postinst commands in right order. Or in worse case, move update-rc.d logic to your postinst scripts after setting u-a links. Regards, -- uin:136542059 jid:Martin.Jansa@gmail.com Jansa Martin sip:jamasip@voip.wengo.fr JaMa ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: All the syslogs 2010-05-07 11:09 ` Martin Jansa @ 2010-05-07 13:02 ` Steffen Sledz 2010-05-07 13:08 ` Martin Jansa 0 siblings, 1 reply; 21+ messages in thread From: Steffen Sledz @ 2010-05-07 13:02 UTC (permalink / raw) To: openembedded-devel Am 07.05.2010 13:09, schrieb Martin Jansa: >> When opkg installs the packages it wants to run update-rc.d *before* >> update-alternatives. This results in an "file does not exist" error. :( >> >> Installing rsyslog (5.5.4-r1.0.5) to root... >> Installing busybox-syslog (1.13.2-r24.1.5) to root... >> Configuring rsyslog >> update-rc.d: /etc/init.d/syslog: file does not exist >> update-alternatives: Linking //etc/init.d/syslog to syslog.rsyslog >> Any suggestions? > > If there is only one u-a file in recipe you can try > inherit update-alternatives to see if it will generate postinst commands > in right order. Sorry, sometimes more than one. > Or in worse case, move update-rc.d logic to your postinst scripts after > setting u-a links. Would be a touch {sysconfdir}/init.d/syslog in pkg_preinst_${PN} be acceptable? It worked well in my test. Regards, Steffen ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: All the syslogs 2010-05-07 13:02 ` Steffen Sledz @ 2010-05-07 13:08 ` Martin Jansa 2010-05-07 14:04 ` Steffen Sledz 0 siblings, 1 reply; 21+ messages in thread From: Martin Jansa @ 2010-05-07 13:08 UTC (permalink / raw) To: openembedded-devel On Fri, May 07, 2010 at 03:02:16PM +0200, Steffen Sledz wrote: > Am 07.05.2010 13:09, schrieb Martin Jansa: > >> When opkg installs the packages it wants to run update-rc.d *before* > >> update-alternatives. This results in an "file does not exist" error. :( > >> > >> Installing rsyslog (5.5.4-r1.0.5) to root... > >> Installing busybox-syslog (1.13.2-r24.1.5) to root... > >> Configuring rsyslog > >> update-rc.d: /etc/init.d/syslog: file does not exist > >> update-alternatives: Linking //etc/init.d/syslog to syslog.rsyslog > >> Any suggestions? > > > > If there is only one u-a file in recipe you can try > > inherit update-alternatives to see if it will generate postinst commands > > in right order. > > Sorry, sometimes more than one. Yeah sort of expected that :/. > > Or in worse case, move update-rc.d logic to your postinst scripts after > > setting u-a links. > > Would be a > > touch {sysconfdir}/init.d/syslog :) also option, but u-a should at least show warning that link file is not and link and in worse scenario refuse to replace non-link file with link to alternative (IIRC the case for u-a-cworth and his variant included in opkg). What I had in mind was adding: update-rc.d $OPT ${INITSCRIPT_NAME} ${INITSCRIPT_PARAMS} after u-a call in postinst and similar update-rc.d $OPT ${INITSCRIPT_NAME} remove in postrm, etc. Regards, -- uin:136542059 jid:Martin.Jansa@gmail.com Jansa Martin sip:jamasip@voip.wengo.fr JaMa ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: All the syslogs 2010-05-07 13:08 ` Martin Jansa @ 2010-05-07 14:04 ` Steffen Sledz 2010-05-07 14:20 ` [PATCH] busybox/syslogs: use update-alternatives for syslog selection Steffen Sledz 2010-05-07 14:52 ` All the syslogs Martin Jansa 0 siblings, 2 replies; 21+ messages in thread From: Steffen Sledz @ 2010-05-07 14:04 UTC (permalink / raw) To: openembedded-devel >> Would be a >> >> touch {sysconfdir}/init.d/syslog > > :) also option, but u-a should at least show warning that link file is > not and link and in worse scenario refuse to replace non-link file with > link to alternative (IIRC the case for u-a-cworth and his variant > included in opkg). > > What I had in mind was adding: > update-rc.d $OPT ${INITSCRIPT_NAME} ${INITSCRIPT_PARAMS} > after u-a call in postinst and similar > update-rc.d $OPT ${INITSCRIPT_NAME} remove > in postrm, etc. I would prefer my method because the update-rc.d class does a bit more than just calling update-rc.d (e.g. stop running services). And i thing it's not a good idea to duplicate the whole code. Regards, Steffen ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH] busybox/syslogs: use update-alternatives for syslog selection 2010-05-07 14:04 ` Steffen Sledz @ 2010-05-07 14:20 ` Steffen Sledz 2010-05-07 14:49 ` Martin Jansa ` (2 more replies) 2010-05-07 14:52 ` All the syslogs Martin Jansa 1 sibling, 3 replies; 21+ messages in thread From: Steffen Sledz @ 2010-05-07 14:20 UTC (permalink / raw) To: openembedded-devel * u-a for init scripts of busybox-syslog, sysklogd, and rsyslog * syslog-ng needs to be integrated too! Signed-off-by: Steffen Sledz <sledz@dresearch.de> --- recipes/busybox/busybox.inc | 18 ++++++++++++++++-- recipes/rsyslog/rsyslog.inc | 22 +++++++++++++--------- recipes/sysklogd/sysklogd.inc | 19 +++++++++++++++---- recipes/sysklogd/sysklogd_1.4.1.bb | 2 +- recipes/sysklogd/sysklogd_1.5.bb | 2 +- 5 files changed, 46 insertions(+), 17 deletions(-) diff --git a/recipes/busybox/busybox.inc b/recipes/busybox/busybox.inc index 17d8d14..31651d6 100644 --- a/recipes/busybox/busybox.inc +++ b/recipes/busybox/busybox.inc @@ -11,7 +11,7 @@ LICENSE = "GPLv2" SECTION = "base" PRIORITY = "required" -INC_PR = "r27" +INC_PR = "r28" SRC_URI = "\ file://busybox-cron \ @@ -46,7 +46,7 @@ RDEPENDS_${PN} += "${PN}-mountall" RRECOMMENDS_${PN} += "libgcc ${PN}-syslog" FILES_${PN}-httpd = "${sysconfdir}/init.d/busybox-httpd /srv/www" -FILES_${PN}-syslog = "${sysconfdir}/init.d/syslog ${sysconfdir}/syslog.conf" +FILES_${PN}-syslog = "${sysconfdir}/init.d/syslog.${PN} ${sysconfdir}/syslog.conf" FILES_${PN}-udhcpd = "${sysconfdir}/init.d/busybox-udhcpd" FILES_${PN} += "${datadir}/udhcpc" @@ -154,6 +154,20 @@ pkg_prerm_${PN}-mountall () { update-alternatives --remove default_mountall mountall.${PN} } +pkg_preinst_${PN}-syslog () { + # this is needed to avoid sysmlink errors, + # because update-rc.d runs before pkg_postinst :( + touch {sysconfdir}/init.d/syslog +} + +pkg_postinst_${PN}-syslog () { + update-alternatives --install ${sysconfdir}/init.d/syslog syslog-init syslog.${PN} 50 +} + +pkg_prerm_${PN}-syslog () { + update-alternatives --remove syslog-init syslog.${PN} +} + pkg_prerm_${PN} () { # This is so you can make busybox commit suicide - removing busybox with no other packages # providing its files, this will make update-alternatives work, but the update-rc.d part diff --git a/recipes/rsyslog/rsyslog.inc b/recipes/rsyslog/rsyslog.inc index 3e39ba0..6471724 100644 --- a/recipes/rsyslog/rsyslog.inc +++ b/recipes/rsyslog/rsyslog.inc @@ -2,7 +2,7 @@ DESCRIPTION = "Rsyslog is an enhanced multi-threaded syslogd" DEPENDS = "zlib" HOMEPAGE = "http://www.rsyslog.com/" LICENSE = "GPLv3" -INC_PR = "r0" +INC_PR = "r1" SRC_URI = "http://download.rsyslog.com/rsyslog/${PN}-${PV}.tar.gz \ file://rsyslog.conf \ @@ -14,19 +14,23 @@ do_install_append() { install -d ${D}/${sysconfdir}/${PN} install ${WORKDIR}/rsyslog.conf ${D}${sysconfdir}/rsyslog.conf install -d ${D}/${sysconfdir}/init.d - install -m 755 ${WORKDIR}/initscript ${D}/${sysconfdir}/init.d/rsyslog + install -m 755 ${WORKDIR}/initscript ${D}/${sysconfdir}/init.d/syslog.${PN} } -pkg_postinst() { - update-rc.d -f syslog remove +pkg_preinst_${PN} () { + # this is needed to avoid sysmlink errors, + # because update-rc.d runs before pkg_postinst :( + touch {sysconfdir}/init.d/syslog } -pkg_postrm() { - update-rc.d syslog add 5 +pkg_postinst_${PN} () { + update-alternatives --install ${sysconfdir}/init.d/syslog syslog-init syslog.${PN} 300 +} + +pkg_prerm_${PN} () { + update-alternatives --remove syslog-init syslog.${PN} } CONFFILES_${PN} = "${sysconfdir}/rsyslog.conf" -INITSCRIPT_NAME = "rsyslog" -#INITSCRIPT_PARAMS = "defaults 05" -INITSCRIPT_PARAMS = "remove" +INITSCRIPT_NAME = "syslog" diff --git a/recipes/sysklogd/sysklogd.inc b/recipes/sysklogd/sysklogd.inc index 65da86d..f6b6aab 100644 --- a/recipes/sysklogd/sysklogd.inc +++ b/recipes/sysklogd/sysklogd.inc @@ -1,16 +1,17 @@ LICENSE = "GPL" SECTION = "base" DESCRIPTION = "The sysklogd package implements two system log daemons." +INC_PR = "r3" SRC_URI = "http://www.ibiblio.org/pub/Linux/system/daemons/sysklogd-${PV}.tar.gz \ file://nonrootinstall.patch;patch=1 \ file://sysklogd" inherit update-rc.d -INITSCRIPT_NAME = "sysklogd" -INITSCRIPT_PARAMS = "start 39 S 1 2 3 . stop 99 0 6 ." + +INITSCRIPT_NAME = "syslog" + CFLAGS_append = " -DSYSV" -RCONFLICTS = "busybox-syslog" do_install () { install -d ${D}${mandir}/man8 \ @@ -23,14 +24,24 @@ do_install () { install -d ${D}${sysconfdir} install -m 644 ${S}/syslog.conf ${D}${sysconfdir}/syslog.conf install -d ${D}${sysconfdir}/init.d - install -m 755 ${WORKDIR}/sysklogd ${D}${sysconfdir}/init.d/sysklogd + install -m 755 ${WORKDIR}/sysklogd ${D}${sysconfdir}/init.d/syslog.${PN} +} + +pkg_preinst_${PN} () { + # this is needed to avoid sysmlink errors, + # because update-rc.d runs before pkg_postinst :( + touch {sysconfdir}/init.d/syslog } + pkg_postinst_${PN} () { update-alternatives --install ${base_sbindir}/syslogd syslogd syslogd.${PN} 100 update-alternatives --install ${base_sbindir}/klogd klogd klogd.${PN} 100 + update-alternatives --install ${sysconfdir}/init.d/syslog syslog-init syslog.${PN} 100 } + pkg_prerm_${PN} () { update-alternatives --remove syslogd syslogd.${PN} update-alternatives --remove klogd klogd.${PN} + update-alternatives --remove syslog-init syslog.${PN} } diff --git a/recipes/sysklogd/sysklogd_1.4.1.bb b/recipes/sysklogd/sysklogd_1.4.1.bb index 3d938f5..e02dd3e 100644 --- a/recipes/sysklogd/sysklogd_1.4.1.bb +++ b/recipes/sysklogd/sysklogd_1.4.1.bb @@ -1,5 +1,5 @@ require sysklogd.inc -PR = "r1" +PR = "${INC_PR}.1" SRC_URI[md5sum] = "d214aa40beabf7bdb0c9b3c64432c774" diff --git a/recipes/sysklogd/sysklogd_1.5.bb b/recipes/sysklogd/sysklogd_1.5.bb index 70e55c3..a015768 100644 --- a/recipes/sysklogd/sysklogd_1.5.bb +++ b/recipes/sysklogd/sysklogd_1.5.bb @@ -1,5 +1,5 @@ require sysklogd.inc -PR = "r2" +PR = "${INC_PR}.2" SRC_URI += "file://no-strip-install.patch;patch=1" -- 1.6.4.2 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH] busybox/syslogs: use update-alternatives for syslog selection 2010-05-07 14:20 ` [PATCH] busybox/syslogs: use update-alternatives for syslog selection Steffen Sledz @ 2010-05-07 14:49 ` Martin Jansa 2010-05-07 15:04 ` Steffen Sledz 2010-05-07 14:58 ` Martin Jansa 2010-05-07 15:34 ` [PATCH v2] " Steffen Sledz 2 siblings, 1 reply; 21+ messages in thread From: Martin Jansa @ 2010-05-07 14:49 UTC (permalink / raw) To: openembedded-devel On Fri, May 07, 2010 at 04:20:36PM +0200, Steffen Sledz wrote: > * u-a for init scripts of busybox-syslog, sysklogd, and rsyslog > * syslog-ng needs to be integrated too! > > Signed-off-by: Steffen Sledz <sledz@dresearch.de> > --- > recipes/busybox/busybox.inc | 18 ++++++++++++++++-- > recipes/rsyslog/rsyslog.inc | 22 +++++++++++++--------- > recipes/sysklogd/sysklogd.inc | 19 +++++++++++++++---- > recipes/sysklogd/sysklogd_1.4.1.bb | 2 +- > recipes/sysklogd/sysklogd_1.5.bb | 2 +- > 5 files changed, 46 insertions(+), 17 deletions(-) > > diff --git a/recipes/busybox/busybox.inc b/recipes/busybox/busybox.inc > index 17d8d14..31651d6 100644 > --- a/recipes/busybox/busybox.inc > +++ b/recipes/busybox/busybox.inc > @@ -11,7 +11,7 @@ LICENSE = "GPLv2" > SECTION = "base" > PRIORITY = "required" > > -INC_PR = "r27" > +INC_PR = "r28" > > SRC_URI = "\ > file://busybox-cron \ > @@ -46,7 +46,7 @@ RDEPENDS_${PN} += "${PN}-mountall" > RRECOMMENDS_${PN} += "libgcc ${PN}-syslog" > > FILES_${PN}-httpd = "${sysconfdir}/init.d/busybox-httpd /srv/www" > -FILES_${PN}-syslog = "${sysconfdir}/init.d/syslog ${sysconfdir}/syslog.conf" > +FILES_${PN}-syslog = "${sysconfdir}/init.d/syslog.${PN} ${sysconfdir}/syslog.conf" > FILES_${PN}-udhcpd = "${sysconfdir}/init.d/busybox-udhcpd" > > FILES_${PN} += "${datadir}/udhcpc" > @@ -154,6 +154,20 @@ pkg_prerm_${PN}-mountall () { > update-alternatives --remove default_mountall mountall.${PN} > } > > +pkg_preinst_${PN}-syslog () { > + # this is needed to avoid sysmlink errors, > + # because update-rc.d runs before pkg_postinst :( > + touch {sysconfdir}/init.d/syslog missing $ touch: cannot touch `{sysconfdir}/init.d/syslog': No such file or directory but even when I add $ here it should fail like update-alternatives: Error: not linking //usr/bin/time to ../../bin/busybox since //usr/bin/time exists and is not a link but fails a bit different Configuring busybox-syslog. update-rc.d: /etc/init.d/syslog: file does not exist update-alternatives: Linking //etc/init.d/syslog to syslog.busybox Removing package busybox-syslog from root... update-alternatives: removing //etc/init.d/syslog as no more alternatives exist for it //usr/lib/opkg/info/busybox-syslog.prerm: line 6: /etc/init.d/syslog: //not found ie prerm has same problem as postinst.., genarated fuctions: postinst #!/bin/sh if test "x$D" != "x"; then OPT="-r $D" else OPT="-s" fi update-rc.d $OPT syslog defaults update-alternatives --install /etc/init.d/syslog syslog-init syslog.busybox 50 postrm #!/bin/sh if test "x$D" != "x"; then OPT="-r $D" else OPT="" fi if test "$1" = "remove" -o "$1" = "purge"; then if ! test -e "/etc/init.d/syslog"; then update-rc.d $OPT syslog remove fi fi preinst # this is needed to avoid sysmlink errors, # because update-rc.d runs before pkg_postinst :( touch /etc/init.d/syslog prerm update-alternatives --remove syslog-init syslog.busybox if test "x$D" = "x"; then if test "$1" = "upgrade" -o "$1" = "remove"; then /etc/init.d/syslog stop fi fi > +} > + > +pkg_postinst_${PN}-syslog () { > + update-alternatives --install ${sysconfdir}/init.d/syslog syslog-init syslog.${PN} 50 > +} > + > +pkg_prerm_${PN}-syslog () { > + update-alternatives --remove syslog-init syslog.${PN} > +} > + > pkg_prerm_${PN} () { > # This is so you can make busybox commit suicide - removing busybox with no other packages > # providing its files, this will make update-alternatives work, but the update-rc.d part > diff --git a/recipes/rsyslog/rsyslog.inc b/recipes/rsyslog/rsyslog.inc > index 3e39ba0..6471724 100644 > --- a/recipes/rsyslog/rsyslog.inc > +++ b/recipes/rsyslog/rsyslog.inc > @@ -2,7 +2,7 @@ DESCRIPTION = "Rsyslog is an enhanced multi-threaded syslogd" > DEPENDS = "zlib" > HOMEPAGE = "http://www.rsyslog.com/" > LICENSE = "GPLv3" > -INC_PR = "r0" > +INC_PR = "r1" > > SRC_URI = "http://download.rsyslog.com/rsyslog/${PN}-${PV}.tar.gz \ > file://rsyslog.conf \ > @@ -14,19 +14,23 @@ do_install_append() { > install -d ${D}/${sysconfdir}/${PN} > install ${WORKDIR}/rsyslog.conf ${D}${sysconfdir}/rsyslog.conf > install -d ${D}/${sysconfdir}/init.d > - install -m 755 ${WORKDIR}/initscript ${D}/${sysconfdir}/init.d/rsyslog > + install -m 755 ${WORKDIR}/initscript ${D}/${sysconfdir}/init.d/syslog.${PN} > } > > -pkg_postinst() { > - update-rc.d -f syslog remove > +pkg_preinst_${PN} () { > + # this is needed to avoid sysmlink errors, > + # because update-rc.d runs before pkg_postinst :( > + touch {sysconfdir}/init.d/syslog > } > > -pkg_postrm() { > - update-rc.d syslog add 5 > +pkg_postinst_${PN} () { > + update-alternatives --install ${sysconfdir}/init.d/syslog syslog-init syslog.${PN} 300 > +} > + > +pkg_prerm_${PN} () { > + update-alternatives --remove syslog-init syslog.${PN} > } > > CONFFILES_${PN} = "${sysconfdir}/rsyslog.conf" > > -INITSCRIPT_NAME = "rsyslog" > -#INITSCRIPT_PARAMS = "defaults 05" > -INITSCRIPT_PARAMS = "remove" > +INITSCRIPT_NAME = "syslog" > diff --git a/recipes/sysklogd/sysklogd.inc b/recipes/sysklogd/sysklogd.inc > index 65da86d..f6b6aab 100644 > --- a/recipes/sysklogd/sysklogd.inc > +++ b/recipes/sysklogd/sysklogd.inc > @@ -1,16 +1,17 @@ > LICENSE = "GPL" > SECTION = "base" > DESCRIPTION = "The sysklogd package implements two system log daemons." > +INC_PR = "r3" > > SRC_URI = "http://www.ibiblio.org/pub/Linux/system/daemons/sysklogd-${PV}.tar.gz \ > file://nonrootinstall.patch;patch=1 \ > file://sysklogd" > > inherit update-rc.d > -INITSCRIPT_NAME = "sysklogd" > -INITSCRIPT_PARAMS = "start 39 S 1 2 3 . stop 99 0 6 ." params not needed anymore? > + > +INITSCRIPT_NAME = "syslog" > + > CFLAGS_append = " -DSYSV" > -RCONFLICTS = "busybox-syslog" Regards, ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] busybox/syslogs: use update-alternatives for syslog selection 2010-05-07 14:49 ` Martin Jansa @ 2010-05-07 15:04 ` Steffen Sledz 2010-05-10 8:30 ` Martin Jansa 0 siblings, 1 reply; 21+ messages in thread From: Steffen Sledz @ 2010-05-07 15:04 UTC (permalink / raw) To: openembedded-devel Am 07.05.2010 16:49, Martin Jansa wrote: >> +pkg_preinst_${PN}-syslog () { >> + # this is needed to avoid sysmlink errors, >> + # because update-rc.d runs before pkg_postinst :( >> + touch {sysconfdir}/init.d/syslog > > missing $ <Grrrr> > touch: cannot touch `{sysconfdir}/init.d/syslog': No such file or directory > > but even when I add $ here it should fail like > update-alternatives: Error: not linking //usr/bin/time to ../../bin/busybox since //usr/bin/time exists and is not a link > > but fails a bit different > > Configuring busybox-syslog. > update-rc.d: /etc/init.d/syslog: file does not exist > update-alternatives: Linking //etc/init.d/syslog to syslog.busybox Are you sure that you run the patched version? It looks like running a version without touch in pkg_preinst. > ... >> -INITSCRIPT_NAME = "sysklogd" >> -INITSCRIPT_PARAMS = "start 39 S 1 2 3 . stop 99 0 6 ." > > params not needed anymore? Fall back to the defaults like in all the other syslog recipes. Regards, Steffen ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] busybox/syslogs: use update-alternatives for syslog selection 2010-05-07 15:04 ` Steffen Sledz @ 2010-05-10 8:30 ` Martin Jansa 0 siblings, 0 replies; 21+ messages in thread From: Martin Jansa @ 2010-05-10 8:30 UTC (permalink / raw) To: openembedded-devel On Fri, May 07, 2010 at 05:04:27PM +0200, Steffen Sledz wrote: > > Configuring busybox-syslog. > > update-rc.d: /etc/init.d/syslog: file does not exist > > update-alternatives: Linking //etc/init.d/syslog to syslog.busybox > > Are you sure that you run the patched version? It looks like > running a version without touch in pkg_preinst. Yes I'm sure. Both reported problems are the same with PATCHv2. Not sure why now I see also Permission denied (but maybe it was the same with PATCHv1). SHR root@gojama ~ $ opkg remove busybox-syslog Removing package busybox-syslog from root... update-alternatives: removing //etc/init.d/syslog as no more alternatives exist for it //usr/lib/opkg/info/busybox-syslog.prerm: line 6: /etc/init.d/syslog: Permission denied Collected errors: * pkg_run_script: prerm script returned status 126. SHR root@gojama ~ $ opkg install busybox-syslog Installing busybox-syslog (1.15.3-r28.1.4) to root... Downloading http://jama.homelinux.org/org.openembedded.shr/armv4t/busybox-syslog_1.15.3-r28.1.4_armv4t.ipk. Configuring busybox-syslog. System startup links for /etc/init.d/syslog already exist. /usr/sbin/update-rc.d: line 237: /etc/rc5.d/S20syslog: Permission denied update-alternatives: Error: not linking //etc/init.d/syslog to syslog.busybox since //etc/init.d/syslog exists and is not a link Collected errors: * pkg_run_script: postinst script returned status 1. * opkg_configure: busybox-syslog.postinst returned 1. > > > ... > >> -INITSCRIPT_NAME = "sysklogd" > >> -INITSCRIPT_PARAMS = "start 39 S 1 2 3 . stop 99 0 6 ." > > > > params not needed anymore? > > Fall back to the defaults like in all the other syslog recipes. OK. -- uin:136542059 jid:Martin.Jansa@gmail.com Jansa Martin sip:jamasip@voip.wengo.fr JaMa ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] busybox/syslogs: use update-alternatives for syslog selection 2010-05-07 14:20 ` [PATCH] busybox/syslogs: use update-alternatives for syslog selection Steffen Sledz 2010-05-07 14:49 ` Martin Jansa @ 2010-05-07 14:58 ` Martin Jansa 2010-05-07 15:08 ` Steffen Sledz 2010-05-07 15:34 ` [PATCH v2] " Steffen Sledz 2 siblings, 1 reply; 21+ messages in thread From: Martin Jansa @ 2010-05-07 14:58 UTC (permalink / raw) To: openembedded-devel On Fri, May 07, 2010 at 04:20:36PM +0200, Steffen Sledz wrote: > * u-a for init scripts of busybox-syslog, sysklogd, and rsyslog > * syslog-ng needs to be integrated too! > > Signed-off-by: Steffen Sledz <sledz@dresearch.de> > --- > recipes/busybox/busybox.inc | 18 ++++++++++++++++-- > recipes/rsyslog/rsyslog.inc | 22 +++++++++++++--------- > recipes/sysklogd/sysklogd.inc | 19 +++++++++++++++---- > recipes/sysklogd/sysklogd_1.4.1.bb | 2 +- > recipes/sysklogd/sysklogd_1.5.bb | 2 +- > 5 files changed, 46 insertions(+), 17 deletions(-) > > diff --git a/recipes/busybox/busybox.inc b/recipes/busybox/busybox.inc > index 17d8d14..31651d6 100644 > --- a/recipes/busybox/busybox.inc > +++ b/recipes/busybox/busybox.inc > @@ -11,7 +11,7 @@ LICENSE = "GPLv2" > SECTION = "base" > PRIORITY = "required" > > -INC_PR = "r27" > +INC_PR = "r28" > > SRC_URI = "\ > file://busybox-cron \ > @@ -46,7 +46,7 @@ RDEPENDS_${PN} += "${PN}-mountall" > RRECOMMENDS_${PN} += "libgcc ${PN}-syslog" > > FILES_${PN}-httpd = "${sysconfdir}/init.d/busybox-httpd /srv/www" > -FILES_${PN}-syslog = "${sysconfdir}/init.d/syslog ${sysconfdir}/syslog.conf" > +FILES_${PN}-syslog = "${sysconfdir}/init.d/syslog.${PN} ${sysconfdir}/syslog.conf" > FILES_${PN}-udhcpd = "${sysconfdir}/init.d/busybox-udhcpd" > > FILES_${PN} += "${datadir}/udhcpc" > @@ -154,6 +154,20 @@ pkg_prerm_${PN}-mountall () { > update-alternatives --remove default_mountall mountall.${PN} > } > > +pkg_preinst_${PN}-syslog () { > + # this is needed to avoid sysmlink errors, > + # because update-rc.d runs before pkg_postinst :( > + touch {sysconfdir}/init.d/syslog > +} > + > +pkg_postinst_${PN}-syslog () { > + update-alternatives --install ${sysconfdir}/init.d/syslog syslog-init syslog.${PN} 50 > +} > + > +pkg_prerm_${PN}-syslog () { > + update-alternatives --remove syslog-init syslog.${PN} > +} > + > pkg_prerm_${PN} () { > # This is so you can make busybox commit suicide - removing busybox with no other packages > # providing its files, this will make update-alternatives work, but the update-rc.d part One more issue with this part, partialy explaining what went wrong in that log. You're not creating syslog.busybox, so real /etc/init.d/syslog is not packaged and after u-a /etc/init.d/syslog points to non-existing /etc/init.d/syslog.busybox and that's why update-rc.d says it doesn't exist. Regards, ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH] busybox/syslogs: use update-alternatives for syslog selection 2010-05-07 14:58 ` Martin Jansa @ 2010-05-07 15:08 ` Steffen Sledz 0 siblings, 0 replies; 21+ messages in thread From: Steffen Sledz @ 2010-05-07 15:08 UTC (permalink / raw) To: openembedded-devel Am 07.05.2010 16:58, Martin Jansa wrote: > One more issue with this part, partialy explaining what went wrong in > that log. You're not creating syslog.busybox, so real /etc/init.d/syslog > is not packaged and after u-a /etc/init.d/syslog points to non-existing > /etc/init.d/syslog.busybox and that's why update-rc.d says it doesn't > exist. Forgot a little modification in do_install. Will be fixed in the next patch version. Thanx, Steffen ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v2] busybox/syslogs: use update-alternatives for syslog selection 2010-05-07 14:20 ` [PATCH] busybox/syslogs: use update-alternatives for syslog selection Steffen Sledz 2010-05-07 14:49 ` Martin Jansa 2010-05-07 14:58 ` Martin Jansa @ 2010-05-07 15:34 ` Steffen Sledz 2 siblings, 0 replies; 21+ messages in thread From: Steffen Sledz @ 2010-05-07 15:34 UTC (permalink / raw) To: openembedded-devel * u-a for init scripts of busybox-syslog, sysklogd, and rsyslog * syslog-ng needs to be integrated too! Signed-off-by: Steffen Sledz <sledz@dresearch.de> --- recipes/busybox/busybox.inc | 20 +++++++++++++++++--- recipes/rsyslog/rsyslog.inc | 22 +++++++++++++--------- recipes/sysklogd/sysklogd.inc | 19 +++++++++++++++---- recipes/sysklogd/sysklogd_1.4.1.bb | 2 +- recipes/sysklogd/sysklogd_1.5.bb | 2 +- 5 files changed, 47 insertions(+), 18 deletions(-) diff --git a/recipes/busybox/busybox.inc b/recipes/busybox/busybox.inc index 17d8d14..33b3811 100644 --- a/recipes/busybox/busybox.inc +++ b/recipes/busybox/busybox.inc @@ -11,7 +11,7 @@ LICENSE = "GPLv2" SECTION = "base" PRIORITY = "required" -INC_PR = "r27" +INC_PR = "r28" SRC_URI = "\ file://busybox-cron \ @@ -46,7 +46,7 @@ RDEPENDS_${PN} += "${PN}-mountall" RRECOMMENDS_${PN} += "libgcc ${PN}-syslog" FILES_${PN}-httpd = "${sysconfdir}/init.d/busybox-httpd /srv/www" -FILES_${PN}-syslog = "${sysconfdir}/init.d/syslog ${sysconfdir}/syslog.conf" +FILES_${PN}-syslog = "${sysconfdir}/init.d/syslog.${PN} ${sysconfdir}/syslog.conf" FILES_${PN}-udhcpd = "${sysconfdir}/init.d/busybox-udhcpd" FILES_${PN} += "${datadir}/udhcpc" @@ -104,7 +104,7 @@ do_install () { ln -sf busybox ${D}${base_bindir}/sh if grep -q "CONFIG_SYSLOGD=y" ${WORKDIR}/defconfig; then - install -m 0755 ${WORKDIR}/syslog ${D}${sysconfdir}/init.d/ + install -m 0755 ${WORKDIR}/syslog ${D}${sysconfdir}/init.d/syslog.${PN} install -m 644 ${WORKDIR}/syslog.conf ${D}${sysconfdir}/ fi if grep "CONFIG_CROND=y" ${WORKDIR}/defconfig; then @@ -154,6 +154,20 @@ pkg_prerm_${PN}-mountall () { update-alternatives --remove default_mountall mountall.${PN} } +pkg_preinst_${PN}-syslog () { + # this is needed to avoid sysmlink errors, + # because update-rc.d runs before pkg_postinst :( + touch ${sysconfdir}/init.d/syslog +} + +pkg_postinst_${PN}-syslog () { + update-alternatives --install ${sysconfdir}/init.d/syslog syslog-init syslog.${PN} 50 +} + +pkg_prerm_${PN}-syslog () { + update-alternatives --remove syslog-init syslog.${PN} +} + pkg_prerm_${PN} () { # This is so you can make busybox commit suicide - removing busybox with no other packages # providing its files, this will make update-alternatives work, but the update-rc.d part diff --git a/recipes/rsyslog/rsyslog.inc b/recipes/rsyslog/rsyslog.inc index 3e39ba0..d7b81c0 100644 --- a/recipes/rsyslog/rsyslog.inc +++ b/recipes/rsyslog/rsyslog.inc @@ -2,7 +2,7 @@ DESCRIPTION = "Rsyslog is an enhanced multi-threaded syslogd" DEPENDS = "zlib" HOMEPAGE = "http://www.rsyslog.com/" LICENSE = "GPLv3" -INC_PR = "r0" +INC_PR = "r1" SRC_URI = "http://download.rsyslog.com/rsyslog/${PN}-${PV}.tar.gz \ file://rsyslog.conf \ @@ -14,19 +14,23 @@ do_install_append() { install -d ${D}/${sysconfdir}/${PN} install ${WORKDIR}/rsyslog.conf ${D}${sysconfdir}/rsyslog.conf install -d ${D}/${sysconfdir}/init.d - install -m 755 ${WORKDIR}/initscript ${D}/${sysconfdir}/init.d/rsyslog + install -m 755 ${WORKDIR}/initscript ${D}/${sysconfdir}/init.d/syslog.${PN} } -pkg_postinst() { - update-rc.d -f syslog remove +pkg_preinst_${PN} () { + # this is needed to avoid sysmlink errors, + # because update-rc.d runs before pkg_postinst :( + touch ${sysconfdir}/init.d/syslog } -pkg_postrm() { - update-rc.d syslog add 5 +pkg_postinst_${PN} () { + update-alternatives --install ${sysconfdir}/init.d/syslog syslog-init syslog.${PN} 300 +} + +pkg_prerm_${PN} () { + update-alternatives --remove syslog-init syslog.${PN} } CONFFILES_${PN} = "${sysconfdir}/rsyslog.conf" -INITSCRIPT_NAME = "rsyslog" -#INITSCRIPT_PARAMS = "defaults 05" -INITSCRIPT_PARAMS = "remove" +INITSCRIPT_NAME = "syslog" diff --git a/recipes/sysklogd/sysklogd.inc b/recipes/sysklogd/sysklogd.inc index 65da86d..8720e09 100644 --- a/recipes/sysklogd/sysklogd.inc +++ b/recipes/sysklogd/sysklogd.inc @@ -1,16 +1,17 @@ LICENSE = "GPL" SECTION = "base" DESCRIPTION = "The sysklogd package implements two system log daemons." +INC_PR = "r3" SRC_URI = "http://www.ibiblio.org/pub/Linux/system/daemons/sysklogd-${PV}.tar.gz \ file://nonrootinstall.patch;patch=1 \ file://sysklogd" inherit update-rc.d -INITSCRIPT_NAME = "sysklogd" -INITSCRIPT_PARAMS = "start 39 S 1 2 3 . stop 99 0 6 ." + +INITSCRIPT_NAME = "syslog" + CFLAGS_append = " -DSYSV" -RCONFLICTS = "busybox-syslog" do_install () { install -d ${D}${mandir}/man8 \ @@ -23,14 +24,24 @@ do_install () { install -d ${D}${sysconfdir} install -m 644 ${S}/syslog.conf ${D}${sysconfdir}/syslog.conf install -d ${D}${sysconfdir}/init.d - install -m 755 ${WORKDIR}/sysklogd ${D}${sysconfdir}/init.d/sysklogd + install -m 755 ${WORKDIR}/sysklogd ${D}${sysconfdir}/init.d/syslog.${PN} +} + +pkg_preinst_${PN} () { + # this is needed to avoid sysmlink errors, + # because update-rc.d runs before pkg_postinst :( + touch ${sysconfdir}/init.d/syslog } + pkg_postinst_${PN} () { update-alternatives --install ${base_sbindir}/syslogd syslogd syslogd.${PN} 100 update-alternatives --install ${base_sbindir}/klogd klogd klogd.${PN} 100 + update-alternatives --install ${sysconfdir}/init.d/syslog syslog-init syslog.${PN} 100 } + pkg_prerm_${PN} () { update-alternatives --remove syslogd syslogd.${PN} update-alternatives --remove klogd klogd.${PN} + update-alternatives --remove syslog-init syslog.${PN} } diff --git a/recipes/sysklogd/sysklogd_1.4.1.bb b/recipes/sysklogd/sysklogd_1.4.1.bb index 3d938f5..e02dd3e 100644 --- a/recipes/sysklogd/sysklogd_1.4.1.bb +++ b/recipes/sysklogd/sysklogd_1.4.1.bb @@ -1,5 +1,5 @@ require sysklogd.inc -PR = "r1" +PR = "${INC_PR}.1" SRC_URI[md5sum] = "d214aa40beabf7bdb0c9b3c64432c774" diff --git a/recipes/sysklogd/sysklogd_1.5.bb b/recipes/sysklogd/sysklogd_1.5.bb index 70e55c3..a015768 100644 --- a/recipes/sysklogd/sysklogd_1.5.bb +++ b/recipes/sysklogd/sysklogd_1.5.bb @@ -1,5 +1,5 @@ require sysklogd.inc -PR = "r2" +PR = "${INC_PR}.2" SRC_URI += "file://no-strip-install.patch;patch=1" -- 1.6.4.2 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: All the syslogs 2010-05-07 14:04 ` Steffen Sledz 2010-05-07 14:20 ` [PATCH] busybox/syslogs: use update-alternatives for syslog selection Steffen Sledz @ 2010-05-07 14:52 ` Martin Jansa 2010-05-12 12:10 ` [PATCH v3] busybox/syslogs: use update-alternatives for syslog selection Steffen Sledz 1 sibling, 1 reply; 21+ messages in thread From: Martin Jansa @ 2010-05-07 14:52 UTC (permalink / raw) To: openembedded-devel On Fri, May 07, 2010 at 04:04:37PM +0200, Steffen Sledz wrote: > >> Would be a > >> > >> touch {sysconfdir}/init.d/syslog > > > > :) also option, but u-a should at least show warning that link file is > > not and link and in worse scenario refuse to replace non-link file with > > link to alternative (IIRC the case for u-a-cworth and his variant > > included in opkg). > > > > What I had in mind was adding: > > update-rc.d $OPT ${INITSCRIPT_NAME} ${INITSCRIPT_PARAMS} > > after u-a call in postinst and similar > > update-rc.d $OPT ${INITSCRIPT_NAME} remove > > in postrm, etc. > > I would prefer my method because the update-rc.d class does > a bit more than just calling update-rc.d (e.g. stop running > services). And i thing it's not a good idea to duplicate the > whole code. I don't like duplicate code too, but maybe you don't need to restart syslog? And your version doesn't work for u-a from opkg and u-a-cworth as described in reply to that patch. > Regards, Regards, > Steffen -- uin:136542059 jid:Martin.Jansa@gmail.com Jansa Martin sip:jamasip@voip.wengo.fr JaMa ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v3] busybox/syslogs: use update-alternatives for syslog selection 2010-05-07 14:52 ` All the syslogs Martin Jansa @ 2010-05-12 12:10 ` Steffen Sledz 2010-05-12 12:21 ` Martin Jansa 0 siblings, 1 reply; 21+ messages in thread From: Steffen Sledz @ 2010-05-12 12:10 UTC (permalink / raw) To: openembedded-devel * u-a for init scripts of busybox-syslog, sysklogd, and rsyslog * syslog-ng needs to be integrated too! Signed-off-by: Steffen Sledz <sledz@dresearch.de> --- recipes/busybox/busybox.inc | 44 +++++++++++++++++++++++++++--- recipes/rsyslog/rsyslog.inc | 48 ++++++++++++++++++++++++++------- recipes/sysklogd/sysklogd.inc | 52 ++++++++++++++++++++++++++++++++--- recipes/sysklogd/sysklogd_1.4.1.bb | 2 +- recipes/sysklogd/sysklogd_1.5.bb | 2 +- 5 files changed, 127 insertions(+), 21 deletions(-) diff --git a/recipes/busybox/busybox.inc b/recipes/busybox/busybox.inc index 17d8d14..7c170fb 100644 --- a/recipes/busybox/busybox.inc +++ b/recipes/busybox/busybox.inc @@ -11,7 +11,7 @@ LICENSE = "GPLv2" SECTION = "base" PRIORITY = "required" -INC_PR = "r27" +INC_PR = "r28" SRC_URI = "\ file://busybox-cron \ @@ -46,12 +46,14 @@ RDEPENDS_${PN} += "${PN}-mountall" RRECOMMENDS_${PN} += "libgcc ${PN}-syslog" FILES_${PN}-httpd = "${sysconfdir}/init.d/busybox-httpd /srv/www" -FILES_${PN}-syslog = "${sysconfdir}/init.d/syslog ${sysconfdir}/syslog.conf" +FILES_${PN}-syslog = "${sysconfdir}/init.d/syslog.${PN} ${sysconfdir}/syslog.conf" FILES_${PN}-udhcpd = "${sysconfdir}/init.d/busybox-udhcpd" FILES_${PN} += "${datadir}/udhcpc" -INITSCRIPT_PACKAGES = "${PN}-httpd ${PN}-syslog ${PN}-udhcpd" +# syslog initscript is handled explicitly because order of +# update-rc.d and update-alternatives is important (see below) +INITSCRIPT_PACKAGES = "${PN}-httpd ${PN}-udhcpd" INITSCRIPT_NAME_${PN}-httpd = "busybox-httpd" INITSCRIPT_NAME_${PN}-syslog = "syslog" INITSCRIPT_NAME_${PN}-udhcpd = "busybox-udhcpd" @@ -104,7 +106,7 @@ do_install () { ln -sf busybox ${D}${base_bindir}/sh if grep -q "CONFIG_SYSLOGD=y" ${WORKDIR}/defconfig; then - install -m 0755 ${WORKDIR}/syslog ${D}${sysconfdir}/init.d/ + install -m 0755 ${WORKDIR}/syslog ${D}${sysconfdir}/init.d/syslog.${PN} install -m 644 ${WORKDIR}/syslog.conf ${D}${sysconfdir}/ fi if grep "CONFIG_CROND=y" ${WORKDIR}/defconfig; then @@ -154,6 +156,40 @@ pkg_prerm_${PN}-mountall () { update-alternatives --remove default_mountall mountall.${PN} } +pkg_postinst_${PN}-syslog () { + update-alternatives --install ${sysconfdir}/init.d/syslog syslog-init syslog.${PN} 50 + + if test "x$D" != "x"; then + OPT="-r $D" + else + OPT="-s" + fi + update-rc.d $OPT syslog defaults +} + +pkg_prerm_${PN}-syslog () { + if test "x$D" = "x"; then + if test "$1" = "upgrade" -o "$1" = "remove"; then + /etc/init.d/syslog stop + fi + fi + + update-alternatives --remove syslog-init syslog.${PN} +} + +pkg_postrm_${PN}-syslog () { + if test "x$D" != "x"; then + OPT="-r $D" + else + OPT="" + fi + if test "$1" = "remove" -o "$1" = "purge"; then + if ! test -e "/etc/init.d/syslog"; then + update-rc.d $OPT syslog remove + fi + fi +} + pkg_prerm_${PN} () { # This is so you can make busybox commit suicide - removing busybox with no other packages # providing its files, this will make update-alternatives work, but the update-rc.d part diff --git a/recipes/rsyslog/rsyslog.inc b/recipes/rsyslog/rsyslog.inc index 3e39ba0..783852b 100644 --- a/recipes/rsyslog/rsyslog.inc +++ b/recipes/rsyslog/rsyslog.inc @@ -2,31 +2,59 @@ DESCRIPTION = "Rsyslog is an enhanced multi-threaded syslogd" DEPENDS = "zlib" HOMEPAGE = "http://www.rsyslog.com/" LICENSE = "GPLv3" -INC_PR = "r0" +INC_PR = "r1" SRC_URI = "http://download.rsyslog.com/rsyslog/${PN}-${PV}.tar.gz \ file://rsyslog.conf \ file://initscript" -inherit autotools update-rc.d + +inherit autotools do_install_append() { install -d ${D}/${sysconfdir}/${PN} install ${WORKDIR}/rsyslog.conf ${D}${sysconfdir}/rsyslog.conf install -d ${D}/${sysconfdir}/init.d - install -m 755 ${WORKDIR}/initscript ${D}/${sysconfdir}/init.d/rsyslog + install -m 755 ${WORKDIR}/initscript ${D}/${sysconfdir}/init.d/syslog.${PN} +} + +# syslog initscript is handled explicitly because order of +# update-rc.d and update-alternatives is important + +pkg_postinst_${PN} () { + update-alternatives --install ${sysconfdir}/init.d/syslog syslog-init syslog.${PN} 300 + + if test "x$D" != "x"; then + OPT="-r $D" + else + OPT="-s" + fi + update-rc.d $OPT syslog defaults } -pkg_postinst() { - update-rc.d -f syslog remove +pkg_prerm_${PN} () { + if test "x$D" = "x"; then + if test "$1" = "upgrade" -o "$1" = "remove"; then + /etc/init.d/syslog stop + fi + fi + + update-alternatives --remove syslog-init syslog.${PN} } -pkg_postrm() { - update-rc.d syslog add 5 +pkg_postrm_${PN} () { + if test "x$D" != "x"; then + OPT="-r $D" + else + OPT="" + fi + if test "$1" = "remove" -o "$1" = "purge"; then + if ! test -e "/etc/init.d/syslog"; then + update-rc.d $OPT syslog remove + fi + fi } CONFFILES_${PN} = "${sysconfdir}/rsyslog.conf" -INITSCRIPT_NAME = "rsyslog" -#INITSCRIPT_PARAMS = "defaults 05" -INITSCRIPT_PARAMS = "remove" +INITSCRIPT_NAME = "syslog" diff --git a/recipes/sysklogd/sysklogd.inc b/recipes/sysklogd/sysklogd.inc index 65da86d..2118c45 100644 --- a/recipes/sysklogd/sysklogd.inc +++ b/recipes/sysklogd/sysklogd.inc @@ -1,16 +1,17 @@ LICENSE = "GPL" SECTION = "base" DESCRIPTION = "The sysklogd package implements two system log daemons." +INC_PR = "r3" SRC_URI = "http://www.ibiblio.org/pub/Linux/system/daemons/sysklogd-${PV}.tar.gz \ file://nonrootinstall.patch;patch=1 \ file://sysklogd" -inherit update-rc.d -INITSCRIPT_NAME = "sysklogd" -INITSCRIPT_PARAMS = "start 39 S 1 2 3 . stop 99 0 6 ." +# syslog initscript is handled explicitly because order of +# update-rc.d and update-alternatives is important (see below) +INITSCRIPT_NAME = "syslog" + CFLAGS_append = " -DSYSV" -RCONFLICTS = "busybox-syslog" do_install () { install -d ${D}${mandir}/man8 \ @@ -23,14 +24,55 @@ do_install () { install -d ${D}${sysconfdir} install -m 644 ${S}/syslog.conf ${D}${sysconfdir}/syslog.conf install -d ${D}${sysconfdir}/init.d - install -m 755 ${WORKDIR}/sysklogd ${D}${sysconfdir}/init.d/sysklogd + install -m 755 ${WORKDIR}/sysklogd ${D}${sysconfdir}/init.d/syslog.${PN} +} + +pkg_preinst_${PN} () { + # all this is needed to avoid sysmlink errors, + # because update-rc.d runs before pkg_postinst :( + if [ -e ${sysconfdir}/init.d/syslog -a ! -L ${sysconfdir}/init.d/syslog ]; then + echo "WARNING:" "non symlink ${sysconfdir}/init.d/syslog exist -> backup to ${sysconfdir}/init.d/syslog.old" + mv ${sysconfdir}/init.d/syslog ${sysconfdir}/init.d/syslog.old + fi + if [ ! -e ${sysconfdir}/init.d/syslog ]; then + ln -s dummy ${sysconfdir}/init.d/syslog + fi } + pkg_postinst_${PN} () { update-alternatives --install ${base_sbindir}/syslogd syslogd syslogd.${PN} 100 update-alternatives --install ${base_sbindir}/klogd klogd klogd.${PN} 100 + update-alternatives --install ${sysconfdir}/init.d/syslog syslog-init syslog.${PN} 100 + + if test "x$D" != "x"; then + OPT="-r $D" + else + OPT="-s" + fi + update-rc.d $OPT syslog defaults } + pkg_prerm_${PN} () { update-alternatives --remove syslogd syslogd.${PN} update-alternatives --remove klogd klogd.${PN} + + if test "x$D" = "x"; then + if test "$1" = "upgrade" -o "$1" = "remove"; then + /etc/init.d/syslog stop + fi + fi + update-alternatives --remove syslog-init syslog.${PN} } +pkg_postrm_${PN} () { + if test "x$D" != "x"; then + OPT="-r $D" + else + OPT="" + fi + if test "$1" = "remove" -o "$1" = "purge"; then + if ! test -e "/etc/init.d/syslog"; then + update-rc.d $OPT syslog remove + fi + fi +} diff --git a/recipes/sysklogd/sysklogd_1.4.1.bb b/recipes/sysklogd/sysklogd_1.4.1.bb index 3d938f5..e02dd3e 100644 --- a/recipes/sysklogd/sysklogd_1.4.1.bb +++ b/recipes/sysklogd/sysklogd_1.4.1.bb @@ -1,5 +1,5 @@ require sysklogd.inc -PR = "r1" +PR = "${INC_PR}.1" SRC_URI[md5sum] = "d214aa40beabf7bdb0c9b3c64432c774" diff --git a/recipes/sysklogd/sysklogd_1.5.bb b/recipes/sysklogd/sysklogd_1.5.bb index 70e55c3..a015768 100644 --- a/recipes/sysklogd/sysklogd_1.5.bb +++ b/recipes/sysklogd/sysklogd_1.5.bb @@ -1,5 +1,5 @@ require sysklogd.inc -PR = "r2" +PR = "${INC_PR}.2" SRC_URI += "file://no-strip-install.patch;patch=1" -- 1.6.4.2 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH v3] busybox/syslogs: use update-alternatives for syslog selection 2010-05-12 12:10 ` [PATCH v3] busybox/syslogs: use update-alternatives for syslog selection Steffen Sledz @ 2010-05-12 12:21 ` Martin Jansa 2010-05-12 12:50 ` [PATCH v4] " Steffen Sledz 0 siblings, 1 reply; 21+ messages in thread From: Martin Jansa @ 2010-05-12 12:21 UTC (permalink / raw) To: openembedded-devel On Wed, May 12, 2010 at 02:10:36PM +0200, Steffen Sledz wrote: > * u-a for init scripts of busybox-syslog, sysklogd, and rsyslog > * syslog-ng needs to be integrated too! Thanks, looks better now. > -inherit autotools update-rc.d > + > +inherit autotools then you probably needs to add: DEPENDS_append = " update-rc.d update-rc.d-native" RDEPENDS_${PN}_append = " ${@base_conditional("ONLINE_PACKAGE_MANAGEMENT", "none", "", "update-rc.d", d)}" > diff --git a/recipes/sysklogd/sysklogd.inc b/recipes/sysklogd/sysklogd.inc > -inherit update-rc.d The same as above. Regards, -- uin:136542059 jid:Martin.Jansa@gmail.com Jansa Martin sip:jamasip@voip.wengo.fr JaMa ^ permalink raw reply [flat|nested] 21+ messages in thread
* [PATCH v4] busybox/syslogs: use update-alternatives for syslog selection 2010-05-12 12:21 ` Martin Jansa @ 2010-05-12 12:50 ` Steffen Sledz 2010-05-13 18:55 ` Sledz, Steffen 2010-05-17 11:11 ` Martin Jansa 0 siblings, 2 replies; 21+ messages in thread From: Steffen Sledz @ 2010-05-12 12:50 UTC (permalink / raw) To: openembedded-devel * u-a for init scripts of busybox-syslog, sysklogd, and rsyslog * syslog-ng needs to be integrated too! Signed-off-by: Steffen Sledz <sledz@dresearch.de> --- recipes/busybox/busybox.inc | 44 ++++++++++++++++++++++++++-- recipes/rsyslog/rsyslog.inc | 50 ++++++++++++++++++++++++++------ recipes/sysklogd/sysklogd.inc | 55 ++++++++++++++++++++++++++++++++--- recipes/sysklogd/sysklogd_1.4.1.bb | 2 +- recipes/sysklogd/sysklogd_1.5.bb | 2 +- 5 files changed, 132 insertions(+), 21 deletions(-) diff --git a/recipes/busybox/busybox.inc b/recipes/busybox/busybox.inc index 17d8d14..7c170fb 100644 --- a/recipes/busybox/busybox.inc +++ b/recipes/busybox/busybox.inc @@ -11,7 +11,7 @@ LICENSE = "GPLv2" SECTION = "base" PRIORITY = "required" -INC_PR = "r27" +INC_PR = "r28" SRC_URI = "\ file://busybox-cron \ @@ -46,12 +46,14 @@ RDEPENDS_${PN} += "${PN}-mountall" RRECOMMENDS_${PN} += "libgcc ${PN}-syslog" FILES_${PN}-httpd = "${sysconfdir}/init.d/busybox-httpd /srv/www" -FILES_${PN}-syslog = "${sysconfdir}/init.d/syslog ${sysconfdir}/syslog.conf" +FILES_${PN}-syslog = "${sysconfdir}/init.d/syslog.${PN} ${sysconfdir}/syslog.conf" FILES_${PN}-udhcpd = "${sysconfdir}/init.d/busybox-udhcpd" FILES_${PN} += "${datadir}/udhcpc" -INITSCRIPT_PACKAGES = "${PN}-httpd ${PN}-syslog ${PN}-udhcpd" +# syslog initscript is handled explicitly because order of +# update-rc.d and update-alternatives is important (see below) +INITSCRIPT_PACKAGES = "${PN}-httpd ${PN}-udhcpd" INITSCRIPT_NAME_${PN}-httpd = "busybox-httpd" INITSCRIPT_NAME_${PN}-syslog = "syslog" INITSCRIPT_NAME_${PN}-udhcpd = "busybox-udhcpd" @@ -104,7 +106,7 @@ do_install () { ln -sf busybox ${D}${base_bindir}/sh if grep -q "CONFIG_SYSLOGD=y" ${WORKDIR}/defconfig; then - install -m 0755 ${WORKDIR}/syslog ${D}${sysconfdir}/init.d/ + install -m 0755 ${WORKDIR}/syslog ${D}${sysconfdir}/init.d/syslog.${PN} install -m 644 ${WORKDIR}/syslog.conf ${D}${sysconfdir}/ fi if grep "CONFIG_CROND=y" ${WORKDIR}/defconfig; then @@ -154,6 +156,40 @@ pkg_prerm_${PN}-mountall () { update-alternatives --remove default_mountall mountall.${PN} } +pkg_postinst_${PN}-syslog () { + update-alternatives --install ${sysconfdir}/init.d/syslog syslog-init syslog.${PN} 50 + + if test "x$D" != "x"; then + OPT="-r $D" + else + OPT="-s" + fi + update-rc.d $OPT syslog defaults +} + +pkg_prerm_${PN}-syslog () { + if test "x$D" = "x"; then + if test "$1" = "upgrade" -o "$1" = "remove"; then + /etc/init.d/syslog stop + fi + fi + + update-alternatives --remove syslog-init syslog.${PN} +} + +pkg_postrm_${PN}-syslog () { + if test "x$D" != "x"; then + OPT="-r $D" + else + OPT="" + fi + if test "$1" = "remove" -o "$1" = "purge"; then + if ! test -e "/etc/init.d/syslog"; then + update-rc.d $OPT syslog remove + fi + fi +} + pkg_prerm_${PN} () { # This is so you can make busybox commit suicide - removing busybox with no other packages # providing its files, this will make update-alternatives work, but the update-rc.d part diff --git a/recipes/rsyslog/rsyslog.inc b/recipes/rsyslog/rsyslog.inc index 3e39ba0..d94ab34 100644 --- a/recipes/rsyslog/rsyslog.inc +++ b/recipes/rsyslog/rsyslog.inc @@ -2,31 +2,61 @@ DESCRIPTION = "Rsyslog is an enhanced multi-threaded syslogd" DEPENDS = "zlib" HOMEPAGE = "http://www.rsyslog.com/" LICENSE = "GPLv3" -INC_PR = "r0" +INC_PR = "r1" SRC_URI = "http://download.rsyslog.com/rsyslog/${PN}-${PV}.tar.gz \ file://rsyslog.conf \ file://initscript" -inherit autotools update-rc.d + +inherit autotools do_install_append() { install -d ${D}/${sysconfdir}/${PN} install ${WORKDIR}/rsyslog.conf ${D}${sysconfdir}/rsyslog.conf install -d ${D}/${sysconfdir}/init.d - install -m 755 ${WORKDIR}/initscript ${D}/${sysconfdir}/init.d/rsyslog + install -m 755 ${WORKDIR}/initscript ${D}/${sysconfdir}/init.d/syslog.${PN} +} + +# syslog initscript is handled explicitly because order of +# update-rc.d and update-alternatives is important +DEPENDS_append = " update-rc.d update-rc.d-native" +RDEPENDS_${PN}_append = " ${@base_conditional("ONLINE_PACKAGE_MANAGEMENT", "none", "", "update-rc.d", d)}" + +pkg_postinst_${PN} () { + update-alternatives --install ${sysconfdir}/init.d/syslog syslog-init syslog.${PN} 300 + + if test "x$D" != "x"; then + OPT="-r $D" + else + OPT="-s" + fi + update-rc.d $OPT syslog defaults } -pkg_postinst() { - update-rc.d -f syslog remove +pkg_prerm_${PN} () { + if test "x$D" = "x"; then + if test "$1" = "upgrade" -o "$1" = "remove"; then + /etc/init.d/syslog stop + fi + fi + + update-alternatives --remove syslog-init syslog.${PN} } -pkg_postrm() { - update-rc.d syslog add 5 +pkg_postrm_${PN} () { + if test "x$D" != "x"; then + OPT="-r $D" + else + OPT="" + fi + if test "$1" = "remove" -o "$1" = "purge"; then + if ! test -e "/etc/init.d/syslog"; then + update-rc.d $OPT syslog remove + fi + fi } CONFFILES_${PN} = "${sysconfdir}/rsyslog.conf" -INITSCRIPT_NAME = "rsyslog" -#INITSCRIPT_PARAMS = "defaults 05" -INITSCRIPT_PARAMS = "remove" +INITSCRIPT_NAME = "syslog" diff --git a/recipes/sysklogd/sysklogd.inc b/recipes/sysklogd/sysklogd.inc index 65da86d..4017736 100644 --- a/recipes/sysklogd/sysklogd.inc +++ b/recipes/sysklogd/sysklogd.inc @@ -1,16 +1,20 @@ LICENSE = "GPL" SECTION = "base" DESCRIPTION = "The sysklogd package implements two system log daemons." +INC_PR = "r3" SRC_URI = "http://www.ibiblio.org/pub/Linux/system/daemons/sysklogd-${PV}.tar.gz \ file://nonrootinstall.patch;patch=1 \ file://sysklogd" -inherit update-rc.d -INITSCRIPT_NAME = "sysklogd" -INITSCRIPT_PARAMS = "start 39 S 1 2 3 . stop 99 0 6 ." +# syslog initscript is handled explicitly because order of +# update-rc.d and update-alternatives is important (see below) +DEPENDS_append = " update-rc.d update-rc.d-native" +RDEPENDS_${PN}_append = " ${@base_conditional("ONLINE_PACKAGE_MANAGEMENT", "none", "", "update-rc.d", d)}" + +INITSCRIPT_NAME = "syslog" + CFLAGS_append = " -DSYSV" -RCONFLICTS = "busybox-syslog" do_install () { install -d ${D}${mandir}/man8 \ @@ -23,14 +27,55 @@ do_install () { install -d ${D}${sysconfdir} install -m 644 ${S}/syslog.conf ${D}${sysconfdir}/syslog.conf install -d ${D}${sysconfdir}/init.d - install -m 755 ${WORKDIR}/sysklogd ${D}${sysconfdir}/init.d/sysklogd + install -m 755 ${WORKDIR}/sysklogd ${D}${sysconfdir}/init.d/syslog.${PN} } + +pkg_preinst_${PN} () { + # all this is needed to avoid sysmlink errors, + # because update-rc.d runs before pkg_postinst :( + if [ -e ${sysconfdir}/init.d/syslog -a ! -L ${sysconfdir}/init.d/syslog ]; then + echo "WARNING:" "non symlink ${sysconfdir}/init.d/syslog exist -> backup to ${sysconfdir}/init.d/syslog.old" + mv ${sysconfdir}/init.d/syslog ${sysconfdir}/init.d/syslog.old + fi + if [ ! -e ${sysconfdir}/init.d/syslog ]; then + ln -s dummy ${sysconfdir}/init.d/syslog + fi +} + pkg_postinst_${PN} () { update-alternatives --install ${base_sbindir}/syslogd syslogd syslogd.${PN} 100 update-alternatives --install ${base_sbindir}/klogd klogd klogd.${PN} 100 + update-alternatives --install ${sysconfdir}/init.d/syslog syslog-init syslog.${PN} 100 + + if test "x$D" != "x"; then + OPT="-r $D" + else + OPT="-s" + fi + update-rc.d $OPT syslog defaults } + pkg_prerm_${PN} () { update-alternatives --remove syslogd syslogd.${PN} update-alternatives --remove klogd klogd.${PN} + + if test "x$D" = "x"; then + if test "$1" = "upgrade" -o "$1" = "remove"; then + /etc/init.d/syslog stop + fi + fi + update-alternatives --remove syslog-init syslog.${PN} } +pkg_postrm_${PN} () { + if test "x$D" != "x"; then + OPT="-r $D" + else + OPT="" + fi + if test "$1" = "remove" -o "$1" = "purge"; then + if ! test -e "/etc/init.d/syslog"; then + update-rc.d $OPT syslog remove + fi + fi +} diff --git a/recipes/sysklogd/sysklogd_1.4.1.bb b/recipes/sysklogd/sysklogd_1.4.1.bb index 3d938f5..e02dd3e 100644 --- a/recipes/sysklogd/sysklogd_1.4.1.bb +++ b/recipes/sysklogd/sysklogd_1.4.1.bb @@ -1,5 +1,5 @@ require sysklogd.inc -PR = "r1" +PR = "${INC_PR}.1" SRC_URI[md5sum] = "d214aa40beabf7bdb0c9b3c64432c774" diff --git a/recipes/sysklogd/sysklogd_1.5.bb b/recipes/sysklogd/sysklogd_1.5.bb index 70e55c3..a015768 100644 --- a/recipes/sysklogd/sysklogd_1.5.bb +++ b/recipes/sysklogd/sysklogd_1.5.bb @@ -1,5 +1,5 @@ require sysklogd.inc -PR = "r2" +PR = "${INC_PR}.2" SRC_URI += "file://no-strip-install.patch;patch=1" -- 1.6.4.2 ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: [PATCH v4] busybox/syslogs: use update-alternatives for syslog selection 2010-05-12 12:50 ` [PATCH v4] " Steffen Sledz @ 2010-05-13 18:55 ` Sledz, Steffen 2010-05-17 11:11 ` Martin Jansa 1 sibling, 0 replies; 21+ messages in thread From: Sledz, Steffen @ 2010-05-13 18:55 UTC (permalink / raw) To: Steffen Sledz, openembedded-devel Some ACKs for this patch? Regards, Steffen ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v4] busybox/syslogs: use update-alternatives for syslog selection 2010-05-12 12:50 ` [PATCH v4] " Steffen Sledz 2010-05-13 18:55 ` Sledz, Steffen @ 2010-05-17 11:11 ` Martin Jansa 1 sibling, 0 replies; 21+ messages in thread From: Martin Jansa @ 2010-05-17 11:11 UTC (permalink / raw) To: openembedded-devel On Wed, May 12, 2010 at 02:50:04PM +0200, Steffen Sledz wrote: > * u-a for init scripts of busybox-syslog, sysklogd, and rsyslog > * syslog-ng needs to be integrated too! > > Signed-off-by: Steffen Sledz <sledz@dresearch.de> This version seems OK to me, tested with busybox-syslog. (Needs INC_PR increase in busybox.inc to rebase on HEAD). Acked-by: Martin Jansa <Martin.Jansa@gmail.com> -- uin:136542059 jid:Martin.Jansa@gmail.com Jansa Martin sip:jamasip@voip.wengo.fr JaMa ^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2010-05-17 11:15 UTC | newest] Thread overview: 21+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-05-06 6:04 All the syslogs Steffen Sledz 2010-05-06 6:13 ` Koen Kooi 2010-05-07 7:46 ` Steffen Sledz 2010-05-07 10:59 ` Steffen Sledz 2010-05-07 11:09 ` Martin Jansa 2010-05-07 13:02 ` Steffen Sledz 2010-05-07 13:08 ` Martin Jansa 2010-05-07 14:04 ` Steffen Sledz 2010-05-07 14:20 ` [PATCH] busybox/syslogs: use update-alternatives for syslog selection Steffen Sledz 2010-05-07 14:49 ` Martin Jansa 2010-05-07 15:04 ` Steffen Sledz 2010-05-10 8:30 ` Martin Jansa 2010-05-07 14:58 ` Martin Jansa 2010-05-07 15:08 ` Steffen Sledz 2010-05-07 15:34 ` [PATCH v2] " Steffen Sledz 2010-05-07 14:52 ` All the syslogs Martin Jansa 2010-05-12 12:10 ` [PATCH v3] busybox/syslogs: use update-alternatives for syslog selection Steffen Sledz 2010-05-12 12:21 ` Martin Jansa 2010-05-12 12:50 ` [PATCH v4] " Steffen Sledz 2010-05-13 18:55 ` Sledz, Steffen 2010-05-17 11:11 ` Martin Jansa
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.