All of lore.kernel.org
 help / color / mirror / Atom feed
From: Timur Tabi <timur@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] powerpc: add support for the Freescale P1022DS reference board
Date: Wed, 26 May 2010 16:59:16 -0500	[thread overview]
Message-ID: <4BFD99B4.6050106@freescale.com> (raw)
In-Reply-To: <4BFD7A94.7070703@freescale.com>

Scott Wood wrote:
> A few of those things don't belong there -- I think first_free_busno 
> should be a static variable inside the pci setup function, for example 
> (does Linux still even need separate bus number spaces on different 
> hoses?).  pcie_ep should just be a local variable.  The hose could maybe 
> just be an uninitialized member of the struct instead of a pointer to an 
> arbitrary other symbol.

I'm not sure what you mean about the 'hose'.  How about this:

static void configure_pcie(enum srds_prtcl pci,
			   u32 devdisr_mask,
			   const char *target,
			   enum law_trgt_if law,
			   phys_addr_t mem_addr,
			   enum law_size mem_size,
			   phys_addr_t io_addr,
			   enum law_size io_size,
			   struct pci_controller *hose)
{
	volatile ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
	struct fsl_pci_info pci_info;
	u32 devdisr;
	static int first_free_busno = 0;
	int is_endpoint;
	int num;

	devdisr = in_be32(&gur->devdisr);

	if (is_serdes_configured(pci) && !(devdisr & devdisr_mask)) {
		set_next_law(mem_addr, mem_size, law);
		set_next_law(io_addr, io_size, law);

		switch (pci) {
#ifdef CONFIG_PCIE1
		case PCIE1:
			num = 1;
			SET_STD_PCIE_INFO(pci_info, 1);
			break;
#endif
#ifdef CONFIG_PCIE2
		case PCIE2:
			num = 2;
			SET_STD_PCIE_INFO(pci_info, 2);
			break;
#endif
#ifdef CONFIG_PCIE3
		case PCIE3:
			num = 3;
			SET_STD_PCIE_INFO(pci_info, 3);
			break;
#endif
#ifdef CONFIG_PCIE4
		case PCIE4:
			num = 4;
			SET_STD_PCIE_INFO(pci_info, 4);
			break;
#endif
		default:
			break;
		}

		is_endpoint = fsl_setup_hose(hose, pci_info.regs);
		printf("    PCIE%u: connected to %s as %s (base addr %lx)\n",
		       num, target, is_endpoint ? "Endpoint" : "Root Complex",
		       pci_info.regs);

		first_free_busno = fsl_pci_init_port(&pci_info, hose, first_free_busno);
	} else {
		printf("    PCIE%u: disabled\n", num);
	}
}


-- 
Timur Tabi
Linux kernel developer at Freescale

  reply	other threads:[~2010-05-26 21:59 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-05-20 22:01 [U-Boot] [PATCH] powerpc: add support for the Freescale P1022DS reference board Timur Tabi
2010-05-20 22:33 ` Wolfgang Denk
2010-05-20 23:13   ` Kumar Gala
2010-05-21  6:50     ` Wolfgang Denk
2010-05-20 23:23   ` Timur Tabi
2010-05-21  7:07     ` Wolfgang Denk
2010-05-21 13:45       ` Timur Tabi
2010-05-21 14:22         ` Wolfgang Denk
2010-05-21 14:33           ` Timur Tabi
2010-05-21 16:07           ` Timur Tabi
2010-05-26 18:12       ` Timur Tabi
2010-05-26 18:17         ` Scott Wood
2010-05-26 18:19           ` Timur Tabi
2010-05-26 19:04             ` Scott Wood
2010-05-26 19:34               ` Timur Tabi
2010-05-26 19:46                 ` Scott Wood
2010-05-26 21:59                   ` Timur Tabi [this message]
2010-05-25 18:30   ` Timur Tabi
2010-05-26 20:10     ` Wolfgang Denk
2010-05-26 20:18       ` Timur Tabi
2010-05-26 20:24       ` Timur Tabi
2010-05-27  7:02         ` Wolfgang Denk
2010-05-27 14:31           ` Timur Tabi
2010-05-27 18:11             ` Wolfgang Denk
2010-05-27 18:25               ` Timur Tabi
2010-05-27 19:03                 ` Scott Wood
2010-05-27 19:07                   ` Timur Tabi
2010-05-27 19:10                     ` Scott Wood
2010-05-27 19:54                       ` Wolfgang Denk
2010-05-27 19:53                     ` Wolfgang Denk
2010-05-27 20:11                       ` Timur Tabi
2010-05-27 21:10                         ` Wolfgang Denk
2010-05-27 19:53                   ` Wolfgang Denk
2010-05-27 20:03                     ` Timur Tabi
2010-05-27 20:59                       ` Wolfgang Denk
2010-05-27 20:05                     ` Scott Wood
2010-05-27 21:03                       ` Wolfgang Denk
2010-05-27 19:45                 ` Wolfgang Denk
2010-05-27 19:54                   ` Timur Tabi
2010-05-27 20:00                     ` Wolfgang Denk
2010-05-27 20:10                       ` Scott Wood
2010-05-21  0:26 ` [U-Boot] [PATCH] powerpc: add support for the FreescaleP1022DS " Liu Dave-R63238
2010-05-21 15:25   ` Timur Tabi
2010-05-21  9:46 ` [U-Boot] [PATCH] powerpc: add support for the Freescale P1022DS " Kumar Gala

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4BFD99B4.6050106@freescale.com \
    --to=timur@freescale.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.