Re: [Xenomai-help] Xenomai and Gumstix Overo

[Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>]

Felipe Brandão Cavalcanti wrote:
> 2010/7/2 Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org
> <mailto:gilles.chanteperdrix@xenomai.org>>
> 
>     Felipe Brandão Cavalcanti wrote:
>     > Sorry for the late reply.
>     >
>     > Anyway, I did enable Xenomai in the kernel itself, so no modules
>     > involved - can't modprobe anything.
>     >
>     > As for the vanilla kernel, I've tried for a while to get it working
>     > right on my board, but no luck. I am not sure if it has support to all
>     > the peripherals, or if there is something that I am doing wrong (used
>     > the defconfig, no modifications).
>     >
>     > I've edited the bitbake files for the kernel, but what I usually do is
>     > to run the unpack script, replace the flush.c file, and keep the
>     process
>     > going. The defconfig is pretty much standard, except that I've enabled
>     > several debugging options and got rid of a few troublesome pieces of
>     > code (power management, CPU Freq. scaling, etc...). As for the edits,
>     > they seem very similar to yours, but I didn't look at them very
>     carefully.
>     >
>     > Fredrik, did you managed to get a kernel compiled at all?
> 
>     What about the EABI?
> 
> 
> EABI is disabled in both the kernel-space and the user-space portion.
> Will try with it later, just to be sure.

Are you sure your toolchain is not an EABI toolchain? Most recent
toolchains are.

-- 
					    Gilles.