Re: PM branch updated to v2.6.35, SRF dropped

[Nishanth Menon <nm@ti.com>]

Kevin Hilman had written, on 08/05/2010 05:29 PM, the following:
> Nishanth Menon <nm@ti.com> writes:
> 
>> Kevin Hilman had written, on 08/04/2010 05:50 PM, the following:
>> [...]
>>
>>> I've only tested the new PM branch on a couple boards to avoid any
>>> further delay getting this version out, update, so hopefully others will
>>> help test.
>>>
>>> I've tested RET on idle & suspend, OFF in idle & suspend on:
>>>
>>> 3430/omap3evm: works
>>>
>>> 3630/Zoom3: works
>>> - Known problem: console hangs on UART wakeup when  wakeups are enabled using
>>>   echo enabled > /sys/devices/platform/serial8250.0/tty/ttyS0/power/wakeup
>>>   but I haven't debugged this further.
>> Just sharing results from SDP testing omap3_pm_defconfig + earlyprintk:
>> SDP3430 (with denx.com u-boot, nor boot): does not boot to shell
>> full Bootlog: http://pastebin.mozilla.org/761964
> 
> Does the same setup boot fine on l-o for-next, or l-o master? 
yep

l-o master (omap3_defconfig):
Log: http://pastebin.mozilla.org/762620


l-o for-next  (omap3_defconfig):
build fails with:
drivers/usb/musb/omap2430.c: In function 'musb_platform_init': 

drivers/usb/musb/omap2430.c:198: error: 'AE5_2430_USB0HS_STP' undeclared 
(first use in this function)
drivers/usb/musb/omap2430.c:198: error: (Each undeclared identifier is 
reported only once
drivers/usb/musb/omap2430.c:198: error: for each function it appears in.)

so disabled CONFIG_ARCH_OMAP2430 and CONFIG_MACH_OMAP_2430SDP in .config 
for quick bootup.

Log: http://pastebin.mozilla.org/762637

Ref:
  remotes/origin/master                 8428498 Linux-omap rebuilt: arm 
changes merged to mainline, final omap changes for 2.6.36
remotes/origin/for-next               d21872b Merge branch 
'v2.6.35-omap-mailbox-for-next' of git://gitorious.org/~doyu/lk/mainline 
into omap-for-linus

> 
>> SDP3630 (with TI u-boot, xloader, mmc boot): ret works, uart wakeup
>> fails for off mode (I am guessing this is similar to Kevin's results)
>> full Bootlog: http://pastebin.mozilla.org/761966
> 
>> OMAP4 Blaze (with TI u-boot, xloader, mmc boot): does not boot, hell
>> lot of crashes - note, need to explicitly enable MACH_OMAP4430_SDP in
>> .config
>> full Bootlog: http://pastebin.mozilla.org/761968
> 
> yeah, I don't expect PM branch to work on OMAP4 until we get the OMAP4 hwmod
> core upstream.
:(

-- 
Regards,
Nishanth Menon