[U-Boot] ARM relocation, probably trivial mistake

[Stefano Babic <sbabic@denx.de>]

Reinhard Meyer wrote:
> Hello,
> 

Hi Reinhard,

> int dram_init(void)
> {
> 	gd->ram_size =
> 		get_ram_size((void*)PHYS_SDRAM, PHYS_SDRAM_MAX_SIZE);
> 	return 0;
> }
> 
> void dram_init_banksize(void)
> {
> 	gd->bd->bi_dram[0].start = PHYS_SDRAM;
> 	gd->bd->bi_dram[0].size =
> 		get_ram_size((void*)PHYS_SDRAM, PHYS_SDRAM_MAX_SIZE);
> }

Do we need both functions ?. I do not add dram_init_banksize() because I
have as you only one bank, and the linker does not complain. However,
which dram_init_banksize is linked in your image ? Yours or the function
defined in arch/arm/lib/board.c ?

> 
> I do probably have a simple misunderstanding of the concept.
> 
> 1. should CONFIG_SKIP_RELOCATE_UBOOT be not defined anymore?

I had the same issue because I forget to remove it from my config file.
After dropping it, I got the u-boot prompt again ;-)

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================