* Re: [RFC] Removal of dead code from arch/arm/*
@ 2010-10-21 0:39 ` N.P.S.
0 siblings, 0 replies; 36+ messages in thread
From: N.P.S. @ 2010-10-21 0:39 UTC (permalink / raw)
To: Eric Miao; +Cc: Russell King, linux-arm-kernel, linux-kernel
W dniu 2010-10-21 02:32, Eric Miao pisze:
> On Thu, Oct 21, 2010 at 8:23 AM, Zimny Lech
> <napohybelskurwysynom2010@gmail.com> wrote:
>> Hi,
>>
>> I will begin testing this, I would like to know your opinion about this patches
>> git pull git://github.com/napohybelskurwysynom2010/Linux-2.6-nps.git rodc1
> Would be great if you can post the patches instead of letting people
> figuring out
> how to peek into your changes? (although a combination of "git remote add" +
> "git fetch" + "git log<your remote branch>" can do the trick, not that straight
> forward)
git branch test
git checkout test
git pull something
git diff master
?
Andrew Morton said that my mail client is sending malformed patches - I
didn't fixed it yet, sorry
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 38c261f..fd30b75 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -37,13 +37,9 @@
*/
struct sys_timer *system_timer;
-#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
+#if defined(CONFIG_RTC_DRV_CMOS)
/* this needs a better home */
DEFINE_SPINLOCK(rtc_lock);
-
-#ifdef CONFIG_RTC_DRV_CMOS_MODULE
-EXPORT_SYMBOL(rtc_lock);
-#endif
#endif /* pc-style 'CMOS' RTC support */
/* change this if you have some constant time drift */
diff --git a/arch/arm/mach-omap1/board-sx1.c
b/arch/arm/mach-omap1/board-sx1.c
index 2eb148b..a0ea190 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -295,32 +295,6 @@ static struct physmap_flash_data sx1_flash_data = {
.nr_parts = ARRAY_SIZE(sx1_partitions),
};
-#ifdef CONFIG_SX1_OLD_FLASH
-/* MTD Intel StrataFlash - old flashes */
-static struct resource sx1_old_flash_resource[] = {
- [0] = {
- .start = OMAP_CS0_PHYS, /* Physical */
- .end = OMAP_CS0_PHYS + SZ_16M - 1,,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = OMAP_CS1_PHYS,
- .end = OMAP_CS1_PHYS + SZ_8M - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device sx1_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &sx1_flash_data,
- },
- .num_resources = 2,
- .resource = &sx1_old_flash_resource,
-};
-#else
-/* MTD Intel 4000 flash - new flashes */
static struct resource sx1_new_flash_resource = {
.start = OMAP_CS0_PHYS,
.end = OMAP_CS0_PHYS + SZ_32M - 1,
@@ -336,7 +310,6 @@ static struct platform_device sx1_flash_device = {
.num_resources = 1,
.resource = &sx1_new_flash_resource,
};
-#endif
/*----------- USB -------------------------*/
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index b1d3f9f..f5c7c26 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -122,13 +122,6 @@ void omap1_pm_idle(void)
#else
while (enable_dyn_sleep) {
-
-#ifdef CONFIG_CBUS_TAHVO_USB
- extern int vbus_active;
- /* Clock requirements? */
- if (vbus_active)
- break;
-#endif
do_sleep = 1;
break;
}
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h
b/arch/arm/mach-s3c2410/include/mach/gpio.h
index b649bf2..a37d274 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -30,8 +30,4 @@
#include <mach/gpio-nrs.h>
#include <mach/gpio-fns.h>
-#ifdef CONFIG_CPU_S3C24XX
-#define S3C_GPIO_END (S3C2410_GPIO_BANKJ + 32)
-#else
#define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32)
-#endif
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c
b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 4c863d3..9bc6cb3 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -106,9 +106,6 @@ static struct platform_device *smdk2443_devices[]
__initdata = {
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_hsmmc0,
-#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
- &s3c_device_ac97,
-#endif
};
static void __init smdk2443_map_io(void)
@@ -121,11 +118,6 @@ static void __init smdk2443_map_io(void)
static void __init smdk2443_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
-
-#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
- s3c24xx_ac97_setup_gpio(S3C24XX_AC97_GPE0);
-#endif
-
platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
smdk_machine_init();
}
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1101.h
b/arch/arm/mach-sa1100/include/mach/SA-1101.h
deleted file mode 100644
index 5d2ad7d..0000000
--- a/arch/arm/mach-sa1100/include/mach/SA-1101.h
+++ /dev/null
@@ -1,925 +0,0 @@
-/*
- * SA-1101.h
- *
- * Copyright (c) Peter Danielsson 1999
- *
- * Definition of constants related to the sa1101
- * support chip for the sa1100
- *
- */
-
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error You must include hardware.h not SA-1101.h
-#endif
-
-#ifndef SA1101_BASE
-#error You must define SA-1101 physical base address
-#endif
-
-#ifndef LANGUAGE
-# ifdef __ASSEMBLY__
-# define LANGUAGE Assembly
-# else
-# define LANGUAGE C
-# endif
-#endif
-
-/*
- * We have mapped the sa1101 depending on the value of SA1101_BASE.
- * It then appears from 0xf4000000.
- */
-
-#define SA1101_p2v( x ) ((x) - SA1101_BASE + 0xf4000000)
-#define SA1101_v2p( x ) ((x) - 0xf4000000 + SA1101_BASE)
-
-#ifndef SA1101_p2v
-#define SA1101_p2v(PhAdd) (PhAdd)
-#endif
-
-#include <mach/bitfield.h>
-
-#define C 0
-#define Assembly 1
-
-
-/*
- * Memory map
- */
-
-#define __SHMEM_CONTROL0 0x00000000
-#define __SYSTEM_CONTROL1 0x00000400
-#define __ARBITER 0x00020000
-#define __SYSTEM_CONTROL2 0x00040000
-#define __SYSTEM_CONTROL3 0x00060000
-#define __PARALLEL_PORT 0x00080000
-#define __VIDMEM_CONTROL 0x00100000
-#define __UPDATE_FIFO 0x00120000
-#define __SHMEM_CONTROL1 0x00140000
-#define __INTERRUPT_CONTROL 0x00160000
-#define __USB_CONTROL 0x00180000
-#define __TRACK_INTERFACE 0x001a0000
-#define __MOUSE_INTERFACE 0x001b0000
-#define __KEYPAD_INTERFACE 0x001c0000
-#define __PCMCIA_INTERFACE 0x001e0000
-#define __VGA_CONTROL 0x00200000
-#define __GPIO_INTERFACE 0x00300000
-
-/*
- * Macro that calculates real address for registers in the SA-1101
- */
-
-#define _SA1101( x ) ((x) + SA1101_BASE)
-
-/*
- * Interface and shared memory controller registers
- *
- * Registers
- * SKCR SA-1101 control register (read/write)
- * SMCR Shared Memory Controller Register
- * SNPR Snoop Register
- */
-
-#define _SKCR _SA1101( 0x00000000 ) /* SA-1101 Control Reg. */
-#define _SMCR _SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */
-#define _SNPR _SA1101( 0x00140400 ) /* Snoop Reg. */
-
-#if LANGUAGE == C
-#define SKCR (*((volatile Word *) SA1101_p2v (_SKCR)))
-#define SMCR (*((volatile Word *) SA1101_p2v (_SMCR)))
-#define SNPR (*((volatile Word *) SA1101_p2v (_SNPR)))
-
-#define SKCR_PLLEn 0x0001 /* Enable On-Chip PLL */
-#define SKCR_BCLKEn 0x0002 /* Enables BCLK */
-#define SKCR_Sleep 0x0004 /* Sleep Mode */
-#define SKCR_IRefEn 0x0008 /* DAC Iref input enable */
-#define SKCR_VCOON 0x0010 /* VCO bias */
-#define SKCR_ScanTestEn 0x0020 /* Enables scan test */
-#define SKCR_ClockTestEn 0x0040 /* Enables clock test */
-
-#define SMCR_DCAC Fld(2,0) /* Number of column address bits */
-#define SMCR_DRAC Fld(2,2) /* Number of row address bits */
-#define SMCR_ArbiterBias 0x0008 /* favor video or USB */
-#define SMCR_TopVidMem Fld(4,5) /* Top 4 bits of vidmem addr. */
-
-#define SMCR_ColAdrBits( x ) /* col. addr bits 8..11 */ \
- (( (x) - 8 ) << FShft (SMCR_DCAC))
-#define SMCR_RowAdrBits( x ) /* row addr bits 9..12 */\
- (( (x) - 9 ) << FShft (SMCR_DRAC))
-
-#define SNPR_VFBstart Fld(12,0) /* Video frame buffer addr */
-#define SNPR_VFBsize Fld(11,12) /* Video frame buffer size */
-#define SNPR_WholeBank (1 << 23) /* Whole bank bit */
-#define SNPR_BankSelect Fld(2,27) /* Bank select */
-#define SNPR_SnoopEn (1 << 31) /* Enable snoop operation */
-
-#define SNPR_Set_VFBsize( x ) /* set frame buffer size (in kb) */ \
- ( (x) << FShft (SNPR_VFBsize))
-#define SNPR_Select_Bank(x) /* select bank 0 or 1 */ \
- (( (x) + 1 ) << FShft (SNPR_BankSelect ))
-
-#endif /* LANGUAGE == C */
-
-/*
- * Video Memory Controller
- *
- * Registers
- * VMCCR Configuration register
- * VMCAR VMC address register
- * VMCDR VMC data register
- *
- */
-
-#define _VMCCR _SA1101( 0x00100000 ) /* Configuration register */
-#define _VMCAR _SA1101( 0x00101000 ) /* VMC address register */
-#define _VMCDR _SA1101( 0x00101400 ) /* VMC data register */
-
-#if LANGUAGE == C
-#define VMCCR (*((volatile Word *) SA1101_p2v (_VMCCR)))
-#define VMCAR (*((volatile Word *) SA1101_p2v (_VMCAR)))
-#define VMCDR (*((volatile Word *) SA1101_p2v (_VMCDR)))
-
-#define VMCCR_RefreshEn 0x0000 /* Enable memory refresh */
-#define VMCCR_Config 0x0001 /* DRAM size */
-#define VMCCR_RefPeriod Fld(2,3) /* Refresh period */
-#define VMCCR_StaleDataWait Fld(4,5) /* Stale FIFO data timeout
counter */
-#define VMCCR_SleepState (1<<9) /* State of interface pins in
sleep*/
-#define VMCCR_RefTest (1<<10) /* refresh test */
-#define VMCCR_RefLow Fld(6,11) /* refresh low counter */
-#define VMCCR_RefHigh Fld(7,17) /* refresh high counter */
-#define VMCCR_SDTCTest Fld(7,24) /* stale data timeout
counter */
-#define VMCCR_ForceSelfRef (1<<31) /* Force self refresh */
-
-#endif LANGUAGE == C
-
-
-/* Update FIFO
- *
- * Registers
- * UFCR Update FIFO Control Register
- * UFSR Update FIFO Status Register
- * UFLVLR update FIFO level register
- * UFDR update FIFO data register
- */
-
-#define _UFCR _SA1101(0x00120000) /* Update FIFO Control Reg. */
-#define _UFSR _SA1101(0x00120400) /* Update FIFO Status Reg. */
-#define _UFLVLR _SA1101(0x00120800) /* Update FIFO level reg. */
-#define _UFDR _SA1101(0x00120c00) /* Update FIFO data reg. */
-
-#if LANGUAGE == C
-
-#define UFCR (*((volatile Word *) SA1101_p2v (_UFCR)))
-#define UFSR (*((volatile Word *) SA1101_p2v (_UFSR)))
-#define UFLVLR (*((volatile Word *) SA1101_p2v (_UFLVLR)))
-#define UFDR (*((volatile Word *) SA1101_p2v (_UFDR)))
-
-
-#define UFCR_FifoThreshhold Fld(7,0) /* Level for FifoGTn flag */
-
-#define UFSR_FifoGTnFlag 0x01 /* FifoGTn flag */#define
UFSR_FifoEmpty 0x80 /* FIFO is empty */
-
-#endif /* LANGUAGE == C */
-
-/* System Controller
- *
- * Registers
- * SKPCR Power Control Register
- * SKCDR Clock Divider Register
- * DACDR1 DAC1 Data register
- * DACDR2 DAC2 Data register
- */
-
-#define _SKPCR _SA1101(0x00000400)
-#define _SKCDR _SA1101(0x00040000)
-#define _DACDR1 _SA1101(0x00060000)
-#define _DACDR2 _SA1101(0x00060400)
-
-#if LANGUAGE == C
-#define SKPCR (*((volatile Word *) SA1101_p2v (_SKPCR)))
-#define SKCDR (*((volatile Word *) SA1101_p2v (_SKCDR)))
-#define DACDR1 (*((volatile Word *) SA1101_p2v (_DACDR1)))
-#define DACDR2 (*((volatile Word *) SA1101_p2v (_DACDR2)))
-
-#define SKPCR_UCLKEn 0x01 /* USB Enable */
-#define SKPCR_PCLKEn 0x02 /* PS/2 Enable */
-#define SKPCR_ICLKEn 0x04 /* Interrupt Controller Enable */
-#define SKPCR_VCLKEn 0x08 /* Video Controller Enable */
-#define SKPCR_PICLKEn 0x10 /* parallel port Enable */
-#define SKPCR_DCLKEn 0x20 /* DACs Enable */
-#define SKPCR_nKPADEn 0x40 /* Multiplexer */
-
-#define SKCDR_PLLMul Fld(7,0) /* PLL Multiplier */
-#define SKCDR_VCLKEn Fld(2,7) /* Video controller clock
divider */
-#define SKDCR_BCLKEn (1<<9) /* BCLK Divider */
-#define SKDCR_UTESTCLKEn (1<<10) /* Route USB clock during test
mode */
-#define SKDCR_DivRValue Fld(6,11) /* Input clock divider for
PLL */
-#define SKDCR_DivNValue Fld(5,17) /* Output clock divider
for PLL */
-#define SKDCR_PLLRSH Fld(3,22) /* PLL bandwidth control */
-#define SKDCR_ChargePump (1<<25) /* Charge pump control */
-#define SKDCR_ClkTestMode (1<<26) /* Clock output test mode */
-#define SKDCR_ClkTestEn (1<<27) /* Test clock generator */
-#define SKDCR_ClkJitterCntl Fld(3,28) /* video clock jitter
compensation */
-
-#define DACDR_DACCount Fld(8,0) /* Count value */
-#define DACDR1_DACCount DACDR_DACCount
-#define DACDR2_DACCount DACDR_DACCount
-
-#endif /* LANGUAGE == C */
-
-/*
- * Parallel Port Interface
- *
- * Registers
- * IEEE_Config IEEE mode selection and programmable attributes
- * IEEE_Control Controls the states of IEEE port control outputs
- * IEEE_Data Forward transfer data register
- * IEEE_Addr Forward transfer address register
- * IEEE_Status Port IO signal status register
- * IEEE_IntStatus Port interrupts status register
- * IEEE_FifoLevels Rx and Tx FIFO interrupt generation levels
- * IEEE_InitTime Forward timeout counter initial value
- * IEEE_TimerStatus Forward timeout counter current value
- * IEEE_FifoReset Reset forward transfer FIFO
- * IEEE_ReloadValue Counter reload value
- * IEEE_TestControl Control testmode
- * IEEE_TestDataIn Test data register
- * IEEE_TestDataInEn Enable test data
- * IEEE_TestCtrlIn Test control signals
- * IEEE_TestCtrlInEn Enable test control signals
- * IEEE_TestDataStat Current data bus value
- *
- */
-
-/*
- * The control registers are defined as offsets from a base address
- */
-
-#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT )
-
-#define _IEEE_Config _IEEE( 0x0000 )
-#define _IEEE_Control _IEEE( 0x0400 )
-#define _IEEE_Data _IEEE( 0x4000 )
-#define _IEEE_Addr _IEEE( 0x0800 )
-#define _IEEE_Status _IEEE( 0x0c00 )
-#define _IEEE_IntStatus _IEEE( 0x1000 )
-#define _IEEE_FifoLevels _IEEE( 0x1400 )
-#define _IEEE_InitTime _IEEE( 0x1800 )
-#define _IEEE_TimerStatus _IEEE( 0x1c00 )
-#define _IEEE_FifoReset _IEEE( 0x2000 )
-#define _IEEE_ReloadValue _IEEE( 0x3c00 )
-#define _IEEE_TestControl _IEEE( 0x2400 )
-#define _IEEE_TestDataIn _IEEE( 0x2800 )
-#define _IEEE_TestDataInEn _IEEE( 0x2c00 )
-#define _IEEE_TestCtrlIn _IEEE( 0x3000 )
-#define _IEEE_TestCtrlInEn _IEEE( 0x3400 )
-#define _IEEE_TestDataStat _IEEE( 0x3800 )
-
-
-#if LANGUAGE == C
-#define IEEE_Config (*((volatile Word *) SA1101_p2v (_IEEE_Config)))
-#define IEEE_Control (*((volatile Word *) SA1101_p2v
(_IEEE_Control)))
-#define IEEE_Data (*((volatile Word *) SA1101_p2v (_IEEE_Data)))
-#define IEEE_Addr (*((volatile Word *) SA1101_p2v (_IEEE_Addr)))
-#define IEEE_Status (*((volatile Word *) SA1101_p2v (_IEEE_Status)))
-#define IEEE_IntStatus (*((volatile Word *) SA1101_p2v
(_IEEE_IntStatus)))
-#define IEEE_FifoLevels (*((volatile Word *) SA1101_p2v
(_IEEE_FifoLevels)))
-#define IEEE_InitTime (*((volatile Word *) SA1101_p2v
(_IEEE_InitTime)))
-#define IEEE_TimerStatus (*((volatile Word *) SA1101_p2v
(_IEEE_TimerStatus)))
-#define IEEE_FifoReset (*((volatile Word *) SA1101_p2v
(_IEEE_FifoReset)))
-#define IEEE_ReloadValue (*((volatile Word *) SA1101_p2v
(_IEEE_ReloadValue)))
-#define IEEE_TestControl (*((volatile Word *) SA1101_p2v
(_IEEE_TestControl)))
-#define IEEE_TestDataIn (*((volatile Word *) SA1101_p2v
(_IEEE_TestDataIn)))
-#define IEEE_TestDataInEn (*((volatile Word *) SA1101_p2v
(_IEEE_TestDataInEn)))
-#define IEEE_TestCtrlIn (*((volatile Word *) SA1101_p2v
(_IEEE_TestCtrlIn)))
-#define IEEE_TestCtrlInEn (*((volatile Word *) SA1101_p2v
(_IEEE_TestCtrlInEn)))
-#define IEEE_TestDataStat (*((volatile Word *) SA1101_p2v
(_IEEE_TestDataStat)))
-
-
-#define IEEE_Config_M Fld(3,0) /* Mode select */
-#define IEEE_Config_D 0x04 /* FIFO access enable */
-#define IEEE_Config_B 0x08 /* 9-bit word enable */
-#define IEEE_Config_T 0x10 /* Data transfer enable */
-#define IEEE_Config_A 0x20 /* Data transfer direction */
-#define IEEE_Config_E 0x40 /* Timer enable */
-#define IEEE_Control_A 0x08 /* AutoFd output */
-#define IEEE_Control_E 0x04 /* Selectin output */
-#define IEEE_Control_T 0x02 /* Strobe output */
-#define IEEE_Control_I 0x01 /* Port init output */
-#define IEEE_Data_C (1<<31) /* Byte count */
-#define IEEE_Data_Db Fld(9,16) /* Data byte 2 */
-#define IEEE_Data_Da Fld(9,0) /* Data byte 1 */
-#define IEEE_Addr_A Fld(8,0) /* forward address transfer byte */
-#define IEEE_Status_A 0x0100 /* nAutoFd port output status */
-#define IEEE_Status_E 0x0080 /* nSelectIn port output status */
-#define IEEE_Status_T 0x0040 /* nStrobe port output status */
-#define IEEE_Status_I 0x0020 /* nInit port output status */
-#define IEEE_Status_B 0x0010 /* Busy port inout status */
-#define IEEE_Status_S 0x0008 /* Select port input status */
-#define IEEE_Status_K 0x0004 /* nAck port input status */
-#define IEEE_Status_F 0x0002 /* nFault port input status */
-#define IEEE_Status_R 0x0001 /* pError port input status */
-
-#define IEEE_IntStatus_IntReqDat 0x0100
-#define IEEE_IntStatus_IntReqEmp 0x0080
-#define IEEE_IntStatus_IntReqInt 0x0040
-#define IEEE_IntStatus_IntReqRav 0x0020
-#define IEEE_IntStatus_IntReqTim 0x0010
-#define IEEE_IntStatus_RevAddrComp 0x0008
-#define IEEE_IntStatus_RevDataComp 0x0004
-#define IEEE_IntStatus_FwdAddrComp 0x0002
-#define IEEE_IntStatus_FwdDataComp 0x0001
-#define IEEE_FifoLevels_RevFifoLevel 2
-#define IEEE_FifoLevels_FwdFifoLevel 1
-#define IEEE_InitTime_TimValInit Fld(22,0)
-#define IEEE_TimerStatus_TimValStat Fld(22,0)
-#define IEEE_ReloadValue_Reload Fld(4,0)
-
-#define IEEE_TestControl_RegClk 0x04
-#define IEEE_TestControl_ClockSelect Fld(2,1)
-#define IEEE_TestControl_TimerTestModeEn 0x01
-#define IEEE_TestCtrlIn_PError 0x10
-#define IEEE_TestCtrlIn_nFault 0x08
-#define IEEE_TestCtrlIn_nAck 0x04
-#define IEEE_TestCtrlIn_PSel 0x02
-#define IEEE_TestCtrlIn_Busy 0x01
-
-#endif /* LANGUAGE == C */
-
-/*
- * VGA Controller
- *
- * Registers
- * VideoControl Video Control Register
- * VgaTiming0 VGA Timing Register 0
- * VgaTiming1 VGA Timing Register 1
- * VgaTiming2 VGA Timing Register 2
- * VgaTiming3 VGA Timing Register 3
- * VgaBorder VGA Border Color Register
- * VgaDBAR VGADMA Base Address Register
- * VgaDCAR VGADMA Channel Current Address Register
- * VgaStatus VGA Status Register
- * VgaInterruptMask VGA Interrupt Mask Register
- * VgaPalette VGA Palette Registers
- * DacControl DAC Control Register
- * VgaTest VGA Controller Test Register
- */
-
-#define _VGA( x ) _SA1101( ( x ) + __VGA_CONTROL )
-
-#define _VideoControl _VGA( 0x0000 )
-#define _VgaTiming0 _VGA( 0x0400 )
-#define _VgaTiming1 _VGA( 0x0800 )
-#define _VgaTiming2 _VGA( 0x0c00 )
-#define _VgaTiming3 _VGA( 0x1000 )
-#define _VgaBorder _VGA( 0x1400 )
-#define _VgaDBAR _VGA( 0x1800 )
-#define _VgaDCAR _VGA( 0x1c00 )
-#define _VgaStatus _VGA( 0x2000 )
-#define _VgaInterruptMask _VGA( 0x2400 )
-#define _VgaPalette _VGA( 0x40000 )
-#define _DacControl _VGA( 0x3000 )
-#define _VgaTest _VGA( 0x2c00 )
-
-#if (LANGUAGE == C)
-#define VideoControl (*((volatile Word *) SA1101_p2v (_VideoControl)))
-#define VgaTiming0 (*((volatile Word *) SA1101_p2v (_VgaTiming0)))
-#define VgaTiming1 (*((volatile Word *) SA1101_p2v (_VgaTiming1)))
-#define VgaTiming2 (*((volatile Word *) SA1101_p2v (_VgaTiming2)))
-#define VgaTiming3 (*((volatile Word *) SA1101_p2v (_VgaTiming3)))
-#define VgaBorder (*((volatile Word *) SA1101_p2v (_VgaBorder)))
-#define VgaDBAR (*((volatile Word *) SA1101_p2v (_VgaDBAR)))
-#define VgaDCAR (*((volatile Word *) SA1101_p2v (_VgaDCAR)))
-#define VgaStatus (*((volatile Word *) SA1101_p2v (_VgaStatus)))
-#define VgaInterruptMask (*((volatile Word *) SA1101_p2v
(_VgaInterruptMask)))
-#define VgaPalette (*((volatile Word *) SA1101_p2v (_VgaPalette)))
-#define DacControl (*((volatile Word *) SA1101_p2v (_DacControl)))
-#define VgaTest (*((volatile Word *) SA1101_p2v (_VgaTest)))
-
-#define VideoControl_VgaEn 0x00000000
-#define VideoControl_BGR 0x00000001
-#define VideoControl_VCompVal Fld(2,2)
-#define VideoControl_VgaReq Fld(4,4)
-#define VideoControl_VBurstL Fld(4,8)
-#define VideoControl_VMode (1<<12)
-#define VideoControl_PalRead (1<<13)
-
-#define VgaTiming0_PPL Fld(6,2)
-#define VgaTiming0_HSW Fld(8,8)
-#define VgaTiming0_HFP Fld(8,16)
-#define VgaTiming0_HBP Fld(8,24)
-
-#define VgaTiming1_LPS Fld(10,0)
-#define VgaTiming1_VSW Fld(6,10)
-#define VgaTiming1_VFP Fld(8,16)
-#define VgaTiming1_VBP Fld(8,24)
-
-#define VgaTiming2_IVS 0x01
-#define VgaTiming2_IHS 0x02
-#define VgaTiming2_CVS 0x04
-#define VgaTiming2_CHS 0x08
-
-#define VgaTiming3_HBS Fld(8,0)
-#define VgaTiming3_HBE Fld(8,8)
-#define VgaTiming3_VBS Fld(8,16)
-#define VgaTiming3_VBE Fld(8,24)
-
-#define VgaBorder_BCOL Fld(24,0)
-
-#define VgaStatus_VFUF 0x01
-#define VgaStatus_VNext 0x02
-#define VgaStatus_VComp 0x04
-
-#define VgaInterruptMask_VFUFMask 0x00
-#define VgaInterruptMask_VNextMask 0x01
-#define VgaInterruptMask_VCompMask 0x02
-
-#define VgaPalette_R Fld(8,0)
-#define VgaPalette_G Fld(8,8)
-#define VgaPalette_B Fld(8,16)
-
-#define DacControl_DACON 0x0001
-#define DacControl_COMPON 0x0002
-#define DacControl_PEDON 0x0004
-#define DacControl_RTrim Fld(5,4)
-#define DacControl_GTrim Fld(5,9)
-#define DacControl_BTrim Fld(5,14)
-
-#define VgaTest_TDAC 0x00
-#define VgaTest_Datatest Fld(4,1)
-#define VgaTest_DACTESTDAC 0x10
-#define VgaTest_DACTESTOUT Fld(3,5)
-
-#endif /* LANGUAGE == C */
-
-/*
- * USB Host Interface Controller
- *
- * Registers
- * Revision
- * Control
- * CommandStatus
- * InterruptStatus
- * InterruptEnable
- * HCCA
- * PeriodCurrentED
- * ControlHeadED
- * BulkHeadED
- * BulkCurrentED
- * DoneHead
- * FmInterval
- * FmRemaining
- * FmNumber
- * PeriodicStart
- * LSThreshold
- * RhDescriptorA
- * RhDescriptorB
- * RhStatus
- * RhPortStatus
- * USBStatus
- * USBReset
- * USTAR
- * USWER
- * USRFR
- * USNFR
- * USTCSR
- * USSR
- *
- */
-
-#define _USB( x ) _SA1101( ( x ) + __USB_CONTROL )
-
-
-#define _Revision _USB( 0x0000 )
-#define _Control _USB( 0x0888 )
-#define _CommandStatus _USB( 0x0c00 )
-#define _InterruptStatus _USB( 0x1000 )
-#define _InterruptEnable _USB( 0x1400 )
-#define _HCCA _USB( 0x1800 )
-#define _PeriodCurrentED _USB( 0x1c00 )
-#define _ControlHeadED _USB( 0x2000 )
-#define _BulkHeadED _USB( 0x2800 )
-#define _BulkCurrentED _USB( 0x2c00 )
-#define _DoneHead _USB( 0x3000 )
-#define _FmInterval _USB( 0x3400 )
-#define _FmRemaining _USB( 0x3800 )
-#define _FmNumber _USB( 0x3c00 )
-#define _PeriodicStart _USB( 0x4000 )
-#define _LSThreshold _USB( 0x4400 )
-#define _RhDescriptorA _USB( 0x4800 )
-#define _RhDescriptorB _USB( 0x4c00 )
-#define _RhStatus _USB( 0x5000 )
-#define _RhPortStatus _USB( 0x5400 )
-#define _USBStatus _USB( 0x11800 )
-#define _USBReset _USB( 0x11c00 )
-
-#define _USTAR _USB( 0x10400 )
-#define _USWER _USB( 0x10800 )
-#define _USRFR _USB( 0x10c00 )
-#define _USNFR _USB( 0x11000 )
-#define _USTCSR _USB( 0x11400 )
-#define _USSR _USB( 0x11800 )
-
-
-#if (LANGUAGE == C)
-
-#define Revision (*((volatile Word *) SA1101_p2v (_Revision)))
-#define Control (*((volatile Word *) SA1101_p2v (_Control)))
-#define CommandStatus (*((volatile Word *) SA1101_p2v (_CommandStatus)))
-#define InterruptStatus (*((volatile Word *) SA1101_p2v
(_InterruptStatus)))
-#define InterruptEnable (*((volatile Word *) SA1101_p2v
(_InterruptEnable)))
-#define HCCA (*((volatile Word *) SA1101_p2v (_HCCA)))
-#define PeriodCurrentED (*((volatile Word *) SA1101_p2v
(_PeriodCurrentED)))
-#define ControlHeadED (*((volatile Word *) SA1101_p2v (_ControlHeadED)))
-#define BulkHeadED (*((volatile Word *) SA1101_p2v (_BulkHeadED)))
-#define BulkCurrentED (*((volatile Word *) SA1101_p2v (_BulkCurrentED)))
-#define DoneHead (*((volatile Word *) SA1101_p2v (_DoneHead)))
-#define FmInterval (*((volatile Word *) SA1101_p2v (_FmInterval)))
-#define FmRemaining (*((volatile Word *) SA1101_p2v (_FmRemaining)))
-#define FmNumber (*((volatile Word *) SA1101_p2v (_FmNumber)))
-#define PeriodicStart (*((volatile Word *) SA1101_p2v (_PeriodicStart)))
-#define LSThreshold (*((volatile Word *) SA1101_p2v (_LSThreshold)))
-#define RhDescriptorA (*((volatile Word *) SA1101_p2v (_RhDescriptorA)))
-#define RhDescriptorB (*((volatile Word *) SA1101_p2v (_RhDescriptorB)))
-#define RhStatus (*((volatile Word *) SA1101_p2v (_RhStatus)))
-#define RhPortStatus (*((volatile Word *) SA1101_p2v (_RhPortStatus)))
-#define USBStatus (*((volatile Word *) SA1101_p2v (_USBStatus)))
-#define USBReset (*((volatile Word *) SA1101_p2v (_USBReset)))
-#define USTAR (*((volatile Word *) SA1101_p2v (_USTAR)))
-#define USWER (*((volatile Word *) SA1101_p2v (_USWER)))
-#define USRFR (*((volatile Word *) SA1101_p2v (_USRFR)))
-#define USNFR (*((volatile Word *) SA1101_p2v (_USNFR)))
-#define USTCSR (*((volatile Word *) SA1101_p2v (_USTCSR)))
-#define USSR (*((volatile Word *) SA1101_p2v (_USSR)))
-
-
-#define USBStatus_IrqHciRmtWkp (1<<7)
-#define USBStatus_IrqHciBuffAcc (1<<8)
-#define USBStatus_nIrqHciM (1<<9)
-#define USBStatus_nHciMFClr (1<<10)
-
-#define USBReset_ForceIfReset 0x01
-#define USBReset_ForceHcReset 0x02
-#define USBReset_ClkGenReset 0x04
-
-#define USTCR_RdBstCntrl Fld(3,0)
-#define USTCR_ByteEnable Fld(4,3)
-#define USTCR_WriteEn (1<<7)
-#define USTCR_FifoCir (1<<8)
-#define USTCR_TestXferSel (1<<9)
-#define USTCR_FifoCirAtEnd (1<<10)
-#define USTCR_nSimScaleDownClk (1<<11)
-
-#define USSR_nAppMDEmpty 0x01
-#define USSR_nAppMDFirst 0x02
-#define USSR_nAppMDLast 0x04
-#define USSR_nAppMDFull 0x08
-#define USSR_nAppMAFull 0x10
-#define USSR_XferReq 0x20
-#define USSR_XferEnd 0x40
-
-#endif /* LANGUAGE == C */
-
-
-/*
- * Interrupt Controller
- *
- * Registers
- * INTTEST0 Test register 0
- * INTTEST1 Test register 1
- * INTENABLE0 Interrupt Enable register 0
- * INTENABLE1 Interrupt Enable register 1
- * INTPOL0 Interrupt Polarity selection 0
- * INTPOL1 Interrupt Polarity selection 1
- * INTTSTSEL Interrupt source selection
- * INTSTATCLR0 Interrupt Status 0
- * INTSTATCLR1 Interrupt Status 1
- * INTSET0 Interrupt Set 0
- * INTSET1 Interrupt Set 1
- */
-
-#define _INT( x ) _SA1101( ( x ) + __INTERRUPT_CONTROL)
-
-#define _INTTEST0 _INT( 0x1000 )
-#define _INTTEST1 _INT( 0x1400 )
-#define _INTENABLE0 _INT( 0x2000 )
-#define _INTENABLE1 _INT( 0x2400 )
-#define _INTPOL0 _INT( 0x3000 )
-#define _INTPOL1 _INT( 0x3400 )
-#define _INTTSTSEL _INT( 0x5000 )
-#define _INTSTATCLR0 _INT( 0x6000 )
-#define _INTSTATCLR1 _INT( 0x6400 )
-#define _INTSET0 _INT( 0x7000 )
-#define _INTSET1 _INT( 0x7400 )
-
-#if ( LANGUAGE == C )
-#define INTTEST0 (*((volatile Word *) SA1101_p2v (_INTTEST0)))
-#define INTTEST1 (*((volatile Word *) SA1101_p2v (_INTTEST1)))
-#define INTENABLE0 (*((volatile Word *) SA1101_p2v (_INTENABLE0)))
-#define INTENABLE1 (*((volatile Word *) SA1101_p2v (_INTENABLE1)))
-#define INTPOL0 (*((volatile Word *) SA1101_p2v (_INTPOL0)))
-#define INTPOL1 (*((volatile Word *) SA1101_p2v (_INTPOL1)))
-#define INTTSTSEL (*((volatile Word *) SA1101_p2v (_INTTSTSEL)))
-#define INTSTATCLR0 (*((volatile Word *) SA1101_p2v (_INTSTATCLR0)))
-#define INTSTATCLR1 (*((volatile Word *) SA1101_p2v (_INTSTATCLR1)))
-#define INTSET0 (*((volatile Word *) SA1101_p2v (_INTSET0)))
-#define INTSET1 (*((volatile Word *) SA1101_p2v (_INTSET1)))
-
-#endif /* LANGUAGE == C */
-
-/*
- * PS/2 Trackpad and Mouse Interfaces
- *
- * Registers (prefix kbd applies to trackpad interface, mse to mouse)
- * KBDCR Control Register
- * KBDSTAT Status Register
- * KBDDATA Transmit/Receive Data register
- * KBDCLKDIV Clock Division Register
- * KBDPRECNT Clock Precount Register
- * KBDTEST1 Test register 1
- * KBDTEST2 Test register 2
- * KBDTEST3 Test register 3
- * KBDTEST4 Test register 4
- * MSECR
- * MSESTAT
- * MSEDATA
- * MSECLKDIV
- * MSEPRECNT
- * MSETEST1
- * MSETEST2
- * MSETEST3
- * MSETEST4
- *
- */
-
-#define _KBD( x ) _SA1101( ( x ) + __TRACK_INTERFACE )
-#define _MSE( x ) _SA1101( ( x ) + __MOUSE_INTERFACE )
-
-#define _KBDCR _KBD( 0x0000 )
-#define _KBDSTAT _KBD( 0x0400 )
-#define _KBDDATA _KBD( 0x0800 )
-#define _KBDCLKDIV _KBD( 0x0c00 )
-#define _KBDPRECNT _KBD( 0x1000 )
-#define _KBDTEST1 _KBD( 0x2000 )
-#define _KBDTEST2 _KBD( 0x2400 )
-#define _KBDTEST3 _KBD( 0x2800 )
-#define _KBDTEST4 _KBD( 0x2c00 )
-#define _MSECR _MSE( 0x0000 )
-#define _MSESTAT _MSE( 0x0400 )
-#define _MSEDATA _MSE( 0x0800 )
-#define _MSECLKDIV _MSE( 0x0c00 )
-#define _MSEPRECNT _MSE( 0x1000 )
-#define _MSETEST1 _MSE( 0x2000 )
-#define _MSETEST2 _MSE( 0x2400 )
-#define _MSETEST3 _MSE( 0x2800 )
-#define _MSETEST4 _MSE( 0x2c00 )
-
-#if ( LANGUAGE == C )
-
-#define KBDCR (*((volatile Word *) SA1101_p2v (_KBDCR)))
-#define KBDSTAT (*((volatile Word *) SA1101_p2v (_KBDSTAT)))
-#define KBDDATA (*((volatile Word *) SA1101_p2v (_KBDDATA)))
-#define KBDCLKDIV (*((volatile Word *) SA1101_p2v (_KBDCLKDIV)))
-#define KBDPRECNT (*((volatile Word *) SA1101_p2v (_KBDPRECNT)))
-#define KBDTEST1 (*((volatile Word *) SA1101_p2v (_KBDTEST1)))
-#define KBDTEST2 (*((volatile Word *) SA1101_p2v (_KBDTEST2)))
-#define KBDTEST3 (*((volatile Word *) SA1101_p2v (_KBDTEST3)))
-#define KBDTEST4 (*((volatile Word *) SA1101_p2v (_KBDTEST4)))
-#define MSECR (*((volatile Word *) SA1101_p2v (_MSECR)))
-#define MSESTAT (*((volatile Word *) SA1101_p2v (_MSESTAT)))
-#define MSEDATA (*((volatile Word *) SA1101_p2v (_MSEDATA)))
-#define MSECLKDIV (*((volatile Word *) SA1101_p2v (_MSECLKDIV)))
-#define MSEPRECNT (*((volatile Word *) SA1101_p2v (_MSEPRECNT)))
-#define MSETEST1 (*((volatile Word *) SA1101_p2v (_MSETEST1)))
-#define MSETEST2 (*((volatile Word *) SA1101_p2v (_MSETEST2)))
-#define MSETEST3 (*((volatile Word *) SA1101_p2v (_MSETEST3)))
-#define MSETEST4 (*((volatile Word *) SA1101_p2v (_MSETEST4)))
-
-
-#define KBDCR_ENA 0x08
-#define KBDCR_FKD 0x02
-#define KBDCR_FKC 0x01
-
-#define KBDSTAT_TXE 0x80
-#define KBDSTAT_TXB 0x40
-#define KBDSTAT_RXF 0x20
-#define KBDSTAT_RXB 0x10
-#define KBDSTAT_ENA 0x08
-#define KBDSTAT_RXP 0x04
-#define KBDSTAT_KBD 0x02
-#define KBDSTAT_KBC 0x01
-
-#define KBDCLKDIV_DivVal Fld(4,0)
-
-#define MSECR_ENA 0x08
-#define MSECR_FKD 0x02
-#define MSECR_FKC 0x01
-
-#define MSESTAT_TXE 0x80
-#define MSESTAT_TXB 0x40
-#define MSESTAT_RXF 0x20
-#define MSESTAT_RXB 0x10
-#define MSESTAT_ENA 0x08
-#define MSESTAT_RXP 0x04
-#define MSESTAT_MSD 0x02
-#define MSESTAT_MSC 0x01
-
-#define MSECLKDIV_DivVal Fld(4,0)
-
-#define KBDTEST1_CD 0x80
-#define KBDTEST1_RC1 0x40
-#define KBDTEST1_MC 0x20
-#define KBDTEST1_C Fld(2,3)
-#define KBDTEST1_T2 0x40
-#define KBDTEST1_T1 0x20
-#define KBDTEST1_T0 0x10
-#define KBDTEST2_TICBnRES 0x08
-#define KBDTEST2_RKC 0x04
-#define KBDTEST2_RKD 0x02
-#define KBDTEST2_SEL 0x01
-#define KBDTEST3_ms_16 0x80
-#define KBDTEST3_us_64 0x40
-#define KBDTEST3_us_16 0x20
-#define KBDTEST3_DIV8 0x10
-#define KBDTEST3_DIn 0x08
-#define KBDTEST3_CIn 0x04
-#define KBDTEST3_KD 0x02
-#define KBDTEST3_KC 0x01
-#define KBDTEST4_BC12 0x80
-#define KBDTEST4_BC11 0x40
-#define KBDTEST4_TRES 0x20
-#define KBDTEST4_CLKOE 0x10
-#define KBDTEST4_CRES 0x08
-#define KBDTEST4_RXB 0x04
-#define KBDTEST4_TXB 0x02
-#define KBDTEST4_SRX 0x01
-
-#define MSETEST1_CD 0x80
-#define MSETEST1_RC1 0x40
-#define MSETEST1_MC 0x20
-#define MSETEST1_C Fld(2,3)
-#define MSETEST1_T2 0x40
-#define MSETEST1_T1 0x20
-#define MSETEST1_T0 0x10
-#define MSETEST2_TICBnRES 0x08
-#define MSETEST2_RKC 0x04
-#define MSETEST2_RKD 0x02
-#define MSETEST2_SEL 0x01
-#define MSETEST3_ms_16 0x80
-#define MSETEST3_us_64 0x40
-#define MSETEST3_us_16 0x20
-#define MSETEST3_DIV8 0x10
-#define MSETEST3_DIn 0x08
-#define MSETEST3_CIn 0x04
-#define MSETEST3_KD 0x02
-#define MSETEST3_KC 0x01
-#define MSETEST4_BC12 0x80
-#define MSETEST4_BC11 0x40
-#define MSETEST4_TRES 0x20
-#define MSETEST4_CLKOE 0x10
-#define MSETEST4_CRES 0x08
-#define MSETEST4_RXB 0x04
-#define MSETEST4_TXB 0x02
-#define MSETEST4_SRX 0x01
-
-#endif /* LANGUAGE == C */
-
-
-/*
- * General-Purpose I/O Interface
- *
- * Registers
- * PADWR Port A Data Write Register
- * PBDWR Port B Data Write Register
- * PADRR Port A Data Read Register
- * PBDRR Port B Data Read Register
- * PADDR Port A Data Direction Register
- * PBDDR Port B Data Direction Register
- * PASSR Port A Sleep State Register
- * PBSSR Port B Sleep State Register
- *
- */
-
-#define _PIO( x ) _SA1101( ( x ) + __GPIO_INTERFACE )
-
-#define _PADWR _PIO( 0x0000 )
-#define _PBDWR _PIO( 0x0400 )
-#define _PADRR _PIO( 0x0000 )
-#define _PBDRR _PIO( 0x0400 )
-#define _PADDR _PIO( 0x0800 )
-#define _PBDDR _PIO( 0x0c00 )
-#define _PASSR _PIO( 0x1000 )
-#define _PBSSR _PIO( 0x1400 )
-
-
-#if ( LANGUAGE == C )
-
-
-#define PADWR (*((volatile Word *) SA1101_p2v (_PADWR)))
-#define PBDWR (*((volatile Word *) SA1101_p2v (_PBDWR)))
-#define PADRR (*((volatile Word *) SA1101_p2v (_PADRR)))
-#define PBDRR (*((volatile Word *) SA1101_p2v (_PBDRR)))
-#define PADDR (*((volatile Word *) SA1101_p2v (_PADDR)))
-#define PBDDR (*((volatile Word *) SA1101_p2v (_PBDDR)))
-#define PASSR (*((volatile Word *) SA1101_p2v (_PASSR)))
-#define PBSSR (*((volatile Word *) SA1101_p2v (_PBSSR)))
-
-#endif
-
-
-
-/*
- * Keypad Interface
- *
- * Registers
- * PXDWR
- * PXDRR
- * PYDWR
- * PYDRR
- *
- */
-
-#define _KEYPAD( x ) _SA1101( ( x ) + __KEYPAD_INTERFACE )
-
-#define _PXDWR _KEYPAD( 0x0000 )
-#define _PXDRR _KEYPAD( 0x0000 )
-#define _PYDWR _KEYPAD( 0x0400 )
-#define _PYDRR _KEYPAD( 0x0400 )
-
-#if ( LANGUAGE == C )
-
-
-#define PXDWR (*((volatile Word *) SA1101_p2v (_PXDWR)))
-#define PXDRR (*((volatile Word *) SA1101_p2v (_PXDRR)))
-#define PYDWR (*((volatile Word *) SA1101_p2v (_PYDWR)))
-#define PYDRR (*((volatile Word *) SA1101_p2v (_PYDRR)))
-
-#endif
-
-
-
-/*
- * PCMCIA Interface
- *
- * Registers
- * PCSR Status Register
- * PCCR Control Register
- * PCSSR Sleep State Register
- *
- */
-
-#define _CARD( x ) _SA1101( ( x ) + __PCMCIA_INTERFACE )
-
-#define _PCSR _CARD( 0x0000 )
-#define _PCCR _CARD( 0x0400 )
-#define _PCSSR _CARD( 0x0800 )
-
-#if ( LANGUAGE == C )
-#define PCSR (*((volatile Word *) SA1101_p2v (_PCSR)))
-#define PCCR (*((volatile Word *) SA1101_p2v (_PCCR)))
-#define PCSSR (*((volatile Word *) SA1101_p2v (_PCSSR)))
-
-#define PCSR_S0_ready 0x0001
-#define PCSR_S1_ready 0x0002
-#define PCSR_S0_detected 0x0004
-#define PCSR_S1_detected 0x0008
-#define PCSR_S0_VS1 0x0010
-#define PCSR_S0_VS2 0x0020
-#define PCSR_S1_VS1 0x0040
-#define PCSR_S1_VS2 0x0080
-#define PCSR_S0_WP 0x0100
-#define PCSR_S1_WP 0x0200
-#define PCSR_S0_BVD1_nSTSCHG 0x0400
-#define PCSR_S0_BVD2_nSPKR 0x0800
-#define PCSR_S1_BVD1_nSTSCHG 0x1000
-#define PCSR_S1_BVD2_nSPKR 0x2000
-
-#define PCCR_S0_VPP0 0x0001
-#define PCCR_S0_VPP1 0x0002
-#define PCCR_S0_VCC0 0x0004
-#define PCCR_S0_VCC1 0x0008
-#define PCCR_S1_VPP0 0x0010
-#define PCCR_S1_VPP1 0x0020
-#define PCCR_S1_VCC0 0x0040
-#define PCCR_S1_VCC1 0x0080
-#define PCCR_S0_reset 0x0100
-#define PCCR_S1_reset 0x0200
-#define PCCR_S0_float 0x0400
-#define PCCR_S1_float 0x0800
-
-#define PCSSR_S0_VCC0 0x0001
-#define PCSSR_S0_VCC1 0x0002
-#define PCSSR_S0_VPP0 0x0004
-#define PCSSR_S0_VPP1 0x0008
-#define PCSSR_S0_control 0x0010
-#define PCSSR_S1_VCC0 0x0020
-#define PCSSR_S1_VCC1 0x0040
-#define PCSSR_S1_VPP0 0x0080
-#define PCSSR_S1_VPP1 0x0100
-#define PCSSR_S1_control 0x0200
-
-#endif
-
-#undef C
-#undef Assembly
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h
b/arch/arm/mach-sa1100/include/mach/hardware.h
index 99f5856..ee5d2bb 100644
--- a/arch/arm/mach-sa1100/include/mach/hardware.h
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -72,8 +72,4 @@ static inline unsigned long get_clock_tick_rate(void)
#include "SA-1100.h"
-#ifdef CONFIG_SA1101
-#include "SA-1101.h"
-#endif
-
#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 60acf9e..bb24011 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -216,85 +216,6 @@ static u16 syscon_clk_get_rate(void)
return val;
}
-#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
-static void enable_i2s0_vcxo(void)
-{
- u16 val;
- unsigned long iflags;
-
- spin_lock_irqsave(&syscon_clkreg_lock, iflags);
- /* Set I2S0 to use the VCXO 26 MHz clock */
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val |= U300_SYSCON_CCR_TURN_VCXO_ON;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val |= U300_SYSCON_CCR_I2S0_USE_VCXO;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
- val |= U300_SYSCON_CEFR_I2S0_CLK_EN;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
- spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void enable_i2s1_vcxo(void)
-{
- u16 val;
- unsigned long iflags;
-
- spin_lock_irqsave(&syscon_clkreg_lock, iflags);
- /* Set I2S1 to use the VCXO 26 MHz clock */
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val |= U300_SYSCON_CCR_TURN_VCXO_ON;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val |= U300_SYSCON_CCR_I2S1_USE_VCXO;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
- val |= U300_SYSCON_CEFR_I2S1_CLK_EN;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
- spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void disable_i2s0_vcxo(void)
-{
- u16 val;
- unsigned long iflags;
-
- spin_lock_irqsave(&syscon_clkreg_lock, iflags);
- /* Disable I2S0 use of the VCXO 26 MHz clock */
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- /* Deactivate VCXO if noone else is using VCXO */
- if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO))
- val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
- val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
- spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void disable_i2s1_vcxo(void)
-{
- u16 val;
- unsigned long iflags;
-
- spin_lock_irqsave(&syscon_clkreg_lock, iflags);
- /* Disable I2S1 use of the VCXO 26 MHz clock */
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- /* Deactivate VCXO if noone else is using VCXO */
- if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO))
- val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
- val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
- spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-#endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */
-
-
static void syscon_clk_rate_set_mclk(unsigned long rate)
{
u16 val;
@@ -383,12 +304,6 @@ void clk_disable(struct clk *clk)
if (likely((u32)clk->parent))
clk_disable(clk->parent);
}
-#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
- if (unlikely(!strcmp(clk->name, "I2S0")))
- disable_i2s0_vcxo();
- if (unlikely(!strcmp(clk->name, "I2S1")))
- disable_i2s1_vcxo();
-#endif
spin_unlock_irqrestore(&clk->lock, iflags);
}
EXPORT_SYMBOL(clk_disable);
@@ -411,12 +326,6 @@ int clk_enable(struct clk *clk)
/* clocks without enable function are always on */
if (clk->enable)
clk->enable(clk);
-#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
- if (unlikely(!strcmp(clk->name, "I2S0")))
- enable_i2s0_vcxo();
- if (unlikely(!strcmp(clk->name, "I2S1")))
- enable_i2s1_vcxo();
-#endif
}
}
spin_unlock_irqrestore(&clk->lock, iflags);
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h
b/arch/arm/plat-mxc/include/mach/mx51.h
index 5aad344..fd5ec07 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -149,11 +149,7 @@
#define MX51_MXC_DMA_CHANNEL_SSI1_RX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_SSI1_TX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_SSI2_RX MXC_DMA_DYNAMIC_CHANNEL
-#ifdef CONFIG_SDMA_IRAM
-#define MX51_MXC_DMA_CHANNEL_SSI2_TX (MX51_MXC_DMA_CHANNEL_IRAM + 1)
-#else /*CONFIG_SDMA_IRAM */
#define MX51_MXC_DMA_CHANNEL_SSI2_TX MXC_DMA_DYNAMIC_CHANNEL
-#endif /*CONFIG_SDMA_IRAM */
#define MX51_MXC_DMA_CHANNEL_CSPI1_RX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_CSPI1_TX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_CSPI2_RX MXC_DMA_DYNAMIC_CHANNEL
diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
index bda8682..2956d3e 100644
--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@@ -33,13 +33,9 @@
#include <asm/hw_irq.h>
-#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
+#if defined(CONFIG_RTC_DRV_CMOS)
/* this needs a better home */
DEFINE_SPINLOCK(rtc_lock);
-
-#ifdef CONFIG_RTC_DRV_CMOS_MODULE
-EXPORT_SYMBOL(rtc_lock);
-#endif
#endif /* pc-style 'CMOS' RTC support */
#ifdef CONFIG_SMP
diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c
index afad677..cd0414a 100644
--- a/drivers/acpi/proc.c
+++ b/drivers/acpi/proc.c
@@ -23,7 +23,7 @@
ACPI_MODULE_NAME("sleep")
-#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
|| !defined(CONFIG_X86)
+#if defined(CONFIG_RTC_DRV_CMOS) || !defined(CONFIG_X86)
/* use /sys/class/rtc/rtcX/wakealarm instead; it's not ACPI-specific */
#else
#define HAVE_ACPI_LEGACY_ALARM
^ permalink raw reply related [flat|nested] 36+ messages in thread* [RFC] Removal of dead code from arch/arm/*
2010-10-21 0:39 ` N.P.S.
@ 2010-10-21 0:58 ` Eric Miao
-1 siblings, 0 replies; 36+ messages in thread
From: Eric Miao @ 2010-10-21 0:58 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Oct 21, 2010 at 8:39 AM, N.P.S.
<napohybelskurwysynom2010@gmail.com> wrote:
> ?W dniu 2010-10-21 02:32, Eric Miao pisze:
>>
>> On Thu, Oct 21, 2010 at 8:23 AM, Zimny Lech
>> <napohybelskurwysynom2010@gmail.com> ?wrote:
>>>
>>> Hi,
>>>
>>> I will begin testing this, I would like to know your opinion about this
>>> patches
>>> git pull git://github.com/napohybelskurwysynom2010/Linux-2.6-nps.git
>>> rodc1
>>
>> Would be great if you can post the patches instead of letting people
>> figuring out
>> how to peek into your changes? (although a combination of "git remote add"
>> +
>> "git fetch" + "git log<your remote branch>" can do the trick, not that
>> straight
>> forward)
>
> git branch test
> git checkout test
> git pull something
> git diff master
> ?
This wouldn't be very nice since git-pull is actually a merge and you don't
know if the remote merges cleanly and git diff probably won't have a good
result if it's not a fast-forward-able branch.
>
> Andrew Morton said that my mail client is sending malformed patches - I
> didn't fixed it yet, sorry
>
>
> diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
> index 38c261f..fd30b75 100644
> --- a/arch/arm/kernel/time.c
> +++ b/arch/arm/kernel/time.c
> @@ -37,13 +37,9 @@
> ?*/
> ?struct sys_timer *system_timer;
>
> -#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
> +#if defined(CONFIG_RTC_DRV_CMOS)
> ?/* this needs a better home */
> ?DEFINE_SPINLOCK(rtc_lock);
> -
> -#ifdef CONFIG_RTC_DRV_CMOS_MODULE
> -EXPORT_SYMBOL(rtc_lock);
> -#endif
> ?#endif ? ?/* pc-style 'CMOS' RTC support */
>
> ?/* change this if you have some constant time drift */
> diff --git a/arch/arm/mach-omap1/board-sx1.c
> b/arch/arm/mach-omap1/board-sx1.c
> index 2eb148b..a0ea190 100644
> --- a/arch/arm/mach-omap1/board-sx1.c
> +++ b/arch/arm/mach-omap1/board-sx1.c
> @@ -295,32 +295,6 @@ static struct physmap_flash_data sx1_flash_data = {
> ? ? .nr_parts ? ?= ARRAY_SIZE(sx1_partitions),
> ?};
>
> -#ifdef CONFIG_SX1_OLD_FLASH
> -/* MTD Intel StrataFlash - old flashes */
> -static struct resource sx1_old_flash_resource[] = {
> - ? ?[0] = {
> - ? ? ? ?.start ? ?= OMAP_CS0_PHYS, ? ?/* Physical */
> - ? ? ? ?.end ? ?= OMAP_CS0_PHYS + SZ_16M - 1,,
> - ? ? ? ?.flags ? ?= IORESOURCE_MEM,
> - ? ?},
> - ? ?[1] = {
> - ? ? ? ?.start ? ?= OMAP_CS1_PHYS,
> - ? ? ? ?.end ? ?= OMAP_CS1_PHYS + SZ_8M - 1,
> - ? ? ? ?.flags ? ?= IORESOURCE_MEM,
> - ? ?},
> -};
> -
> -static struct platform_device sx1_flash_device = {
> - ? ?.name ? ? ? ?= "physmap-flash",
> - ? ?.id ? ? ? ?= 0,
> - ? ?.dev ? ? ? ?= {
> - ? ? ? ?.platform_data ? ?= &sx1_flash_data,
> - ? ?},
> - ? ?.num_resources ? ?= 2,
> - ? ?.resource ? ?= &sx1_old_flash_resource,
> -};
> -#else
> -/* MTD Intel 4000 flash - new flashes */
> ?static struct resource sx1_new_flash_resource = {
> ? ? .start ? ? ? ?= OMAP_CS0_PHYS,
> ? ? .end ? ? ? ?= OMAP_CS0_PHYS + SZ_32M - 1,
> @@ -336,7 +310,6 @@ static struct platform_device sx1_flash_device = {
> ? ? .num_resources ? ?= 1,
> ? ? .resource ? ?= &sx1_new_flash_resource,
> ?};
> -#endif
>
> ?/*----------- USB -------------------------*/
>
> diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
> index b1d3f9f..f5c7c26 100644
> --- a/arch/arm/mach-omap1/pm.c
> +++ b/arch/arm/mach-omap1/pm.c
> @@ -122,13 +122,6 @@ void omap1_pm_idle(void)
> ?#else
>
> ? ? while (enable_dyn_sleep) {
> -
> -#ifdef CONFIG_CBUS_TAHVO_USB
> - ? ? ? ?extern int vbus_active;
> - ? ? ? ?/* Clock requirements? */
> - ? ? ? ?if (vbus_active)
> - ? ? ? ? ? ?break;
> -#endif
> ? ? ? ? do_sleep = 1;
> ? ? ? ? break;
> ? ? }
> diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h
> b/arch/arm/mach-s3c2410/include/mach/gpio.h
> index b649bf2..a37d274 100644
> --- a/arch/arm/mach-s3c2410/include/mach/gpio.h
> +++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
> @@ -30,8 +30,4 @@
> ?#include <mach/gpio-nrs.h>
> ?#include <mach/gpio-fns.h>
>
> -#ifdef CONFIG_CPU_S3C24XX
> -#define S3C_GPIO_END ? ?(S3C2410_GPIO_BANKJ + 32)
> -#else
> ?#define S3C_GPIO_END ? ?(S3C2410_GPIO_BANKH + 32)
> -#endif
> diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c
> b/arch/arm/mach-s3c2443/mach-smdk2443.c
> index 4c863d3..9bc6cb3 100644
> --- a/arch/arm/mach-s3c2443/mach-smdk2443.c
> +++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
> @@ -106,9 +106,6 @@ static struct platform_device *smdk2443_devices[]
> __initdata = {
> &s3c_device_wdt,
> &s3c_device_i2c0,
> &s3c_device_hsmmc0,
> -#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
> - &s3c_device_ac97,
> -#endif
> ?};
>
> ?static void __init smdk2443_map_io(void)
> @@ -121,11 +118,6 @@ static void __init smdk2443_map_io(void)
> ?static void __init smdk2443_machine_init(void)
> ?{
> ? ? s3c_i2c0_set_platdata(NULL);
> -
> -#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
> - ? ?s3c24xx_ac97_setup_gpio(S3C24XX_AC97_GPE0);
> -#endif
> -
> ? ? platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
> ? ? smdk_machine_init();
> ?}
> diff --git a/arch/arm/mach-sa1100/include/mach/SA-1101.h
> b/arch/arm/mach-sa1100/include/mach/SA-1101.h
> deleted file mode 100644
> index 5d2ad7d..0000000
> --- a/arch/arm/mach-sa1100/include/mach/SA-1101.h
> +++ /dev/null
> @@ -1,925 +0,0 @@
> -/*
> - * SA-1101.h
> - *
> - * Copyright (c) Peter Danielsson 1999
> - *
> - * Definition of constants related to the sa1101
> - * support chip for the sa1100
> - *
> - */
> -
> -
> -/* Be sure that virtual mapping is defined right */
> -#ifndef __ASM_ARCH_HARDWARE_H
> -#error You must include hardware.h not SA-1101.h
> -#endif
> -
> -#ifndef SA1101_BASE
> -#error You must define SA-1101 physical base address
> -#endif
> -
> -#ifndef LANGUAGE
> -# ifdef __ASSEMBLY__
> -# ?define LANGUAGE Assembly
> -# else
> -# ?define LANGUAGE C
> -# endif
> -#endif
> -
> -/*
> - * We have mapped the sa1101 depending on the value of SA1101_BASE.
> - * It then appears from 0xf4000000.
> - */
> -
> -#define SA1101_p2v( x ) ? ? ? ? ((x) - SA1101_BASE + 0xf4000000)
> -#define SA1101_v2p( x ) ? ? ? ? ((x) - 0xf4000000 ?+ SA1101_BASE)
> -
> -#ifndef SA1101_p2v
> -#define SA1101_p2v(PhAdd) ?(PhAdd)
> -#endif
> -
> -#include <mach/bitfield.h>
> -
> -#define C ? ? ? ? ? ? ? 0
> -#define Assembly ? ? ? ?1
> -
> -
> -/*
> - * Memory map
> - */
> -
> -#define __SHMEM_CONTROL0 ? ?0x00000000
> -#define __SYSTEM_CONTROL1 ? ?0x00000400
> -#define __ARBITER ? ? ? ?0x00020000
> -#define __SYSTEM_CONTROL2 ? ?0x00040000
> -#define __SYSTEM_CONTROL3 ? ?0x00060000
> -#define __PARALLEL_PORT ? ? ? ?0x00080000
> -#define __VIDMEM_CONTROL ? ?0x00100000
> -#define __UPDATE_FIFO ? ? ? ?0x00120000
> -#define __SHMEM_CONTROL1 ? ?0x00140000
> -#define __INTERRUPT_CONTROL ? ?0x00160000
> -#define __USB_CONTROL ? ? ? ?0x00180000
> -#define __TRACK_INTERFACE ? ?0x001a0000
> -#define __MOUSE_INTERFACE ? ?0x001b0000
> -#define __KEYPAD_INTERFACE ? ?0x001c0000
> -#define __PCMCIA_INTERFACE ? ?0x001e0000
> -#define ? ?__VGA_CONTROL ? ? ? ?0x00200000
> -#define __GPIO_INTERFACE ? ?0x00300000
> -
> -/*
> - * Macro that calculates real address for registers in the SA-1101
> - */
> -
> -#define _SA1101( x ) ? ?((x) + SA1101_BASE)
> -
> -/*
> - * Interface and shared memory controller registers
> - *
> - * Registers
> - * ? ?SKCR ? ? ? ?SA-1101 control register (read/write)
> - * ? ?SMCR ? ? ? ?Shared Memory Controller Register
> - * ? ?SNPR ? ? ? ?Snoop Register
> - */
> -
> -#define _SKCR ? ? ? ?_SA1101( 0x00000000 ) /* SA-1101 Control Reg. */
> -#define _SMCR ? ? ? ?_SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */
> -#define _SNPR ? ? ? ?_SA1101( 0x00140400 ) /* Snoop Reg. */
> -
> -#if LANGUAGE == C
> -#define SKCR ? ? ? ?(*((volatile Word *) SA1101_p2v (_SKCR)))
> -#define SMCR ? ? ? ?(*((volatile Word *) SA1101_p2v (_SMCR)))
> -#define SNPR ? ? ? ?(*((volatile Word *) SA1101_p2v (_SNPR)))
> -
> -#define SKCR_PLLEn ? ? ?0x0001 ? ? ?/* Enable On-Chip PLL */
> -#define SKCR_BCLKEn ? ? ?0x0002 ? ? ?/* Enables BCLK */
> -#define SKCR_Sleep ? ? ?0x0004 ? ? ?/* Sleep Mode */
> -#define SKCR_IRefEn ? ? ?0x0008 ? ? ?/* DAC Iref input enable */
> -#define SKCR_VCOON ? ? ?0x0010 ? ? ?/* VCO bias */
> -#define SKCR_ScanTestEn ? ? ?0x0020 ? ? ?/* Enables scan test */
> -#define SKCR_ClockTestEn ?0x0040 ? ? ?/* Enables clock test */
> -
> -#define SMCR_DCAC ? ? ?Fld(2,0) ? ? ?/* Number of column address bits */
> -#define SMCR_DRAC ? ? ?Fld(2,2) ? ? ?/* Number of row address bits */
> -#define SMCR_ArbiterBias ?0x0008 ? ? ?/* favor video or USB */
> -#define SMCR_TopVidMem ? ? ?Fld(4,5) ? ? ?/* Top 4 bits of vidmem addr. */
> -
> -#define SMCR_ColAdrBits( x ) ? ? ? ? ?/* col. addr bits 8..11 */ \
> - ? ?(( (x) - 8 ) << FShft (SMCR_DCAC))
> -#define SMCR_RowAdrBits( x ) ? ? ? ? ?/* row addr bits 9..12 */\
> - ? ?(( (x) - 9 ) << FShft (SMCR_DRAC))
> -
> -#define SNPR_VFBstart ? ? ?Fld(12,0) ? ?/* Video frame buffer addr */
> -#define SNPR_VFBsize ? ? ?Fld(11,12) ? ?/* Video frame buffer size */
> -#define SNPR_WholeBank ? ? ?(1 << 23) ? ?/* Whole bank bit */
> -#define SNPR_BankSelect ? ? ?Fld(2,27) ? ?/* Bank select */
> -#define SNPR_SnoopEn ? ? ?(1 << 31) ? ?/* Enable snoop operation */
> -
> -#define SNPR_Set_VFBsize( x ) ? /* set frame buffer size (in kb) */ \
> - ? ?( (x) << FShft (SNPR_VFBsize))
> -#define SNPR_Select_Bank(x) ? ? /* select bank 0 or 1 */ ?\
> - ? ?(( (x) + 1 ) << FShft (SNPR_BankSelect ))
> -
> -#endif /* LANGUAGE == C */
> -
> -/*
> - * Video Memory Controller
> - *
> - * Registers
> - * ? ?VMCCR ? ?Configuration register
> - * ? ?VMCAR ? ?VMC address register
> - * ? ?VMCDR ? ?VMC data register
> - *
> - */
> -
> -#define _VMCCR ? ? ? ?_SA1101( 0x00100000 ) ? ?/* Configuration register */
> -#define _VMCAR ? ? ? ?_SA1101( 0x00101000 ) ? ?/* VMC address register */
> -#define _VMCDR ? ? ? ?_SA1101( 0x00101400 ) ? ?/* VMC data register */
> -
> -#if LANGUAGE == C
> -#define VMCCR ? ? ? ?(*((volatile Word *) SA1101_p2v (_VMCCR)))
> -#define VMCAR ? ? ? ?(*((volatile Word *) SA1101_p2v (_VMCAR)))
> -#define VMCDR ? ? ? ?(*((volatile Word *) SA1101_p2v (_VMCDR)))
> -
> -#define VMCCR_RefreshEn ? ? ? ?0x0000 ? ? ?/* Enable memory refresh */
> -#define VMCCR_Config ? ? ? ?0x0001 ? ? ?/* DRAM size */
> -#define VMCCR_RefPeriod ? ? ? ?Fld(2,3) ? ? ?/* Refresh period */
> -#define VMCCR_StaleDataWait Fld(4,5) ? ? ?/* Stale FIFO data timeout
> counter */
> -#define VMCCR_SleepState ? ?(1<<9) ? ? ?/* State of interface pins in
> sleep*/
> -#define VMCCR_RefTest ? ? ? ?(1<<10) ? ? ?/* refresh test */
> -#define VMCCR_RefLow ? ? ? ?Fld(6,11) ? ? ?/* refresh low counter */
> -#define VMCCR_RefHigh ? ? ? ?Fld(7,17) ? ? ?/* refresh high counter */
> -#define VMCCR_SDTCTest ? ? ? ?Fld(7,24) ? ? ?/* stale data timeout counter
> */
> -#define VMCCR_ForceSelfRef ?(1<<31) ? ? ?/* Force self refresh */
> -
> -#endif LANGUAGE == C
> -
> -
> -/* Update FIFO
> - *
> - * Registers
> - * ? ?UFCR ? ?Update FIFO Control Register
> - * ? ?UFSR ? ?Update FIFO Status Register
> - * ? ?UFLVLR ? ?update FIFO level register
> - * ? ?UFDR ? ?update FIFO data register
> - */
> -
> -#define _UFCR ? ?_SA1101(0x00120000) ? /* Update FIFO Control Reg. */
> -#define _UFSR ? ?_SA1101(0x00120400) ? /* Update FIFO Status Reg. */
> -#define _UFLVLR ? ?_SA1101(0x00120800) ? /* Update FIFO level reg. */
> -#define _UFDR ? ?_SA1101(0x00120c00) ? /* Update FIFO data reg. */
> -
> -#if LANGUAGE == C
> -
> -#define UFCR ? ? (*((volatile Word *) SA1101_p2v (_UFCR)))
> -#define UFSR ? ?(*((volatile Word *) SA1101_p2v (_UFSR)))
> -#define UFLVLR ? ?(*((volatile Word *) SA1101_p2v (_UFLVLR)))
> -#define UFDR ? ?(*((volatile Word *) SA1101_p2v (_UFDR)))
> -
> -
> -#define UFCR_FifoThreshhold ? ?Fld(7,0) ? ?/* Level for FifoGTn flag */
> -
> -#define UFSR_FifoGTnFlag ? ?0x01 ? ? ? ?/* FifoGTn flag */#define
> UFSR_FifoEmpty ? ? ? ?0x80 ? ? ? ?/* FIFO is empty */
> -
> -#endif /* LANGUAGE == C */
> -
> -/* System Controller
> - *
> - * Registers
> - * ? ?SKPCR ? ?Power Control Register
> - * ? ?SKCDR ? ?Clock Divider Register
> - * ? ?DACDR1 ? ?DAC1 Data register
> - * ? ?DACDR2 ? ?DAC2 Data register
> - */
> -
> -#define _SKPCR ? ? ? ?_SA1101(0x00000400)
> -#define _SKCDR ? ? ? ?_SA1101(0x00040000)
> -#define _DACDR1 ? ? ? ?_SA1101(0x00060000)
> -#define _DACDR2 ? ? ? ?_SA1101(0x00060400)
> -
> -#if LANGUAGE == C
> -#define SKPCR ? ? (*((volatile Word *) SA1101_p2v (_SKPCR)))
> -#define SKCDR ? ?(*((volatile Word *) SA1101_p2v (_SKCDR)))
> -#define DACDR1 ? ?(*((volatile Word *) SA1101_p2v (_DACDR1)))
> -#define DACDR2 ? ?(*((volatile Word *) SA1101_p2v (_DACDR2)))
> -
> -#define SKPCR_UCLKEn ? ? ? ? 0x01 ? ?/* USB Enable */
> -#define SKPCR_PCLKEn ? ? ? ? 0x02 ? ?/* PS/2 Enable */
> -#define SKPCR_ICLKEn ? ? ? ? 0x04 ? ?/* Interrupt Controller Enable */
> -#define SKPCR_VCLKEn ? ? ? ? 0x08 ? ?/* Video Controller Enable */
> -#define SKPCR_PICLKEn ? ? ? ? 0x10 ? ?/* parallel port Enable */
> -#define SKPCR_DCLKEn ? ? ? ? 0x20 ? ?/* DACs Enable */
> -#define SKPCR_nKPADEn ? ? ? ? 0x40 ? ?/* Multiplexer */
> -
> -#define SKCDR_PLLMul ? ? ? ? Fld(7,0) ? ?/* PLL Multiplier */
> -#define SKCDR_VCLKEn ? ? ? ? Fld(2,7) ? ?/* Video controller clock divider
> */
> -#define SKDCR_BCLKEn ? ? ? ? (1<<9) ? ?/* BCLK Divider */
> -#define SKDCR_UTESTCLKEn ? ? (1<<10) ? ?/* Route USB clock during test mode
> */
> -#define SKDCR_DivRValue ? ? ? ? Fld(6,11) ? ?/* Input clock divider for PLL
> */
> -#define SKDCR_DivNValue ? ? ? ? Fld(5,17) ? ?/* Output clock divider for
> PLL */
> -#define SKDCR_PLLRSH ? ? ? ? Fld(3,22) ? ?/* PLL bandwidth control */
> -#define SKDCR_ChargePump ? ? (1<<25) ? ?/* Charge pump control */
> -#define SKDCR_ClkTestMode ? ?(1<<26) ? ?/* Clock output test mode */
> -#define SKDCR_ClkTestEn ? ? ? ? (1<<27) ? ?/* Test clock generator */
> -#define SKDCR_ClkJitterCntl ?Fld(3,28) ? ?/* video clock jitter
> compensation */
> -
> -#define DACDR_DACCount ? ? ? ? Fld(8,0) ? ?/* Count value */
> -#define DACDR1_DACCount ? ? ? ? DACDR_DACCount
> -#define DACDR2_DACCount ? ? ? ? DACDR_DACCount
> -
> -#endif /* LANGUAGE == C */
> -
> -/*
> - * Parallel Port Interface
> - *
> - * Registers
> - * ? ?IEEE_Config ? ?IEEE mode selection and programmable attributes
> - * ? ?IEEE_Control ? ?Controls the states of IEEE port control outputs
> - * ? ?IEEE_Data ? ? ? ?Forward transfer data register
> - * ? ?IEEE_Addr ? ? ? ?Forward transfer address register
> - * ? ?IEEE_Status ? ?Port IO signal status register
> - * ? ?IEEE_IntStatus ? ?Port interrupts status register
> - * ? ?IEEE_FifoLevels ? Rx and Tx FIFO interrupt generation levels
> - * ? ?IEEE_InitTime ? ?Forward timeout counter initial value
> - * ? ?IEEE_TimerStatus ? ?Forward timeout counter current value
> - * ? ?IEEE_FifoReset ? ?Reset forward transfer FIFO
> - * ? ?IEEE_ReloadValue ? ?Counter reload value
> - * ? ?IEEE_TestControl ? ?Control testmode
> - * ? ?IEEE_TestDataIn ? ?Test data register
> - * ? ?IEEE_TestDataInEn ? ?Enable test data
> - * ? ?IEEE_TestCtrlIn ? ?Test control signals
> - * ? ?IEEE_TestCtrlInEn ? ?Enable test control signals
> - * ? ?IEEE_TestDataStat ? ?Current data bus value
> - *
> - */
> -
> -/*
> - * The control registers are defined as offsets from a base address
> - */
> -
> -#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT )
> -
> -#define _IEEE_Config ? ? ? ?_IEEE( 0x0000 )
> -#define _IEEE_Control ? ? ? ?_IEEE( 0x0400 )
> -#define _IEEE_Data ? ? ? ?_IEEE( 0x4000 )
> -#define _IEEE_Addr ? ? ? ?_IEEE( 0x0800 )
> -#define _IEEE_Status ? ? ? ?_IEEE( 0x0c00 )
> -#define _IEEE_IntStatus ? ? ? ?_IEEE( 0x1000 )
> -#define _IEEE_FifoLevels ? ?_IEEE( 0x1400 )
> -#define _IEEE_InitTime ? ? ? ?_IEEE( 0x1800 )
> -#define _IEEE_TimerStatus ? _IEEE( 0x1c00 )
> -#define _IEEE_FifoReset ? ? ? ?_IEEE( 0x2000 )
> -#define _IEEE_ReloadValue ? _IEEE( 0x3c00 )
> -#define _IEEE_TestControl ? _IEEE( 0x2400 )
> -#define _IEEE_TestDataIn ? ?_IEEE( 0x2800 )
> -#define _IEEE_TestDataInEn ?_IEEE( 0x2c00 )
> -#define _IEEE_TestCtrlIn ? ?_IEEE( 0x3000 )
> -#define _IEEE_TestCtrlInEn ?_IEEE( 0x3400 )
> -#define _IEEE_TestDataStat ?_IEEE( 0x3800 )
> -
> -
> -#if LANGUAGE == C
> -#define IEEE_Config ? ? ? ?(*((volatile Word *) SA1101_p2v (_IEEE_Config)))
> -#define IEEE_Control ? ? ? ?(*((volatile Word *) SA1101_p2v
> (_IEEE_Control)))
> -#define IEEE_Data ? ? ? ?(*((volatile Word *) SA1101_p2v (_IEEE_Data)))
> -#define IEEE_Addr ? ? ? ?(*((volatile Word *) SA1101_p2v (_IEEE_Addr)))
> -#define IEEE_Status ? ? ? ?(*((volatile Word *) SA1101_p2v (_IEEE_Status)))
> -#define IEEE_IntStatus ? ? ? ?(*((volatile Word *) SA1101_p2v
> (_IEEE_IntStatus)))
> -#define IEEE_FifoLevels ? ? ? ?(*((volatile Word *) SA1101_p2v
> (_IEEE_FifoLevels)))
> -#define IEEE_InitTime ? ? ? ?(*((volatile Word *) SA1101_p2v
> (_IEEE_InitTime)))
> -#define IEEE_TimerStatus ? ?(*((volatile Word *) SA1101_p2v
> (_IEEE_TimerStatus)))
> -#define IEEE_FifoReset ? ? ? ?(*((volatile Word *) SA1101_p2v
> (_IEEE_FifoReset)))
> -#define IEEE_ReloadValue ? ?(*((volatile Word *) SA1101_p2v
> (_IEEE_ReloadValue)))
> -#define IEEE_TestControl ? ?(*((volatile Word *) SA1101_p2v
> (_IEEE_TestControl)))
> -#define IEEE_TestDataIn ? ? (*((volatile Word *) SA1101_p2v
> (_IEEE_TestDataIn)))
> -#define IEEE_TestDataInEn ? (*((volatile Word *) SA1101_p2v
> (_IEEE_TestDataInEn)))
> -#define IEEE_TestCtrlIn ? ? (*((volatile Word *) SA1101_p2v
> (_IEEE_TestCtrlIn)))
> -#define IEEE_TestCtrlInEn ? (*((volatile Word *) SA1101_p2v
> (_IEEE_TestCtrlInEn)))
> -#define IEEE_TestDataStat ? (*((volatile Word *) SA1101_p2v
> (_IEEE_TestDataStat)))
> -
> -
> -#define IEEE_Config_M ? ? ? ?Fld(3,0) ? ? /* Mode select */
> -#define IEEE_Config_D ? ? ? ?0x04 ? ? /* FIFO access enable */
> -#define IEEE_Config_B ? ? ? ?0x08 ? ? /* 9-bit word enable */
> -#define IEEE_Config_T ? ? ? ?0x10 ? ? /* Data transfer enable */
> -#define IEEE_Config_A ? ? ? ?0x20 ? ? /* Data transfer direction */
> -#define IEEE_Config_E ? ? ? ?0x40 ? ? /* Timer enable */
> -#define IEEE_Control_A ? ? ? ?0x08 ? ? /* AutoFd output */
> -#define IEEE_Control_E ? ? ? ?0x04 ? ? /* Selectin output */
> -#define IEEE_Control_T ? ? ? ?0x02 ? ? /* Strobe output */
> -#define IEEE_Control_I ? ? ? ?0x01 ? ? /* Port init output */
> -#define IEEE_Data_C ? ? ? ?(1<<31) ? ? /* Byte count */
> -#define IEEE_Data_Db ? ? ? ?Fld(9,16) ? ? /* Data byte 2 */
> -#define IEEE_Data_Da ? ? ? ?Fld(9,0) ? ? /* Data byte 1 */
> -#define IEEE_Addr_A ? ? ? ?Fld(8,0) ? ? /* forward address transfer byte */
> -#define IEEE_Status_A ? ? ? ?0x0100 ? ? /* nAutoFd port output status */
> -#define IEEE_Status_E ? ? ? ?0x0080 ? ? /* nSelectIn port output status */
> -#define IEEE_Status_T ? ? ? ?0x0040 ? ? /* nStrobe port output status */
> -#define IEEE_Status_I ? ? ? ?0x0020 ? ? /* nInit port output status */
> -#define IEEE_Status_B ? ? ? ?0x0010 ? ? /* Busy port inout status */
> -#define IEEE_Status_S ? ? ? ?0x0008 ? ? /* Select port input status */
> -#define IEEE_Status_K ? ? ? ?0x0004 ? ? /* nAck port input status */
> -#define IEEE_Status_F ? ? ? ?0x0002 ? ? /* nFault port input status */
> -#define IEEE_Status_R ? ? ? ?0x0001 ? ? /* pError port input status */
> -
> -#define IEEE_IntStatus_IntReqDat ? ? 0x0100
> -#define IEEE_IntStatus_IntReqEmp ? ? 0x0080
> -#define IEEE_IntStatus_IntReqInt ? ? 0x0040
> -#define IEEE_IntStatus_IntReqRav ? ? 0x0020
> -#define IEEE_IntStatus_IntReqTim ? ? 0x0010
> -#define IEEE_IntStatus_RevAddrComp ? ? 0x0008
> -#define IEEE_IntStatus_RevDataComp ? ? 0x0004
> -#define IEEE_IntStatus_FwdAddrComp ? ? 0x0002
> -#define IEEE_IntStatus_FwdDataComp ? ? 0x0001
> -#define IEEE_FifoLevels_RevFifoLevel ? ? 2
> -#define IEEE_FifoLevels_FwdFifoLevel ? ? 1
> -#define IEEE_InitTime_TimValInit ? ? Fld(22,0)
> -#define IEEE_TimerStatus_TimValStat ? ? Fld(22,0)
> -#define IEEE_ReloadValue_Reload ? ? ? ? Fld(4,0)
> -
> -#define IEEE_TestControl_RegClk ? ? ? ? 0x04
> -#define IEEE_TestControl_ClockSelect ? ? Fld(2,1)
> -#define IEEE_TestControl_TimerTestModeEn 0x01
> -#define IEEE_TestCtrlIn_PError ? ? ? ? 0x10
> -#define IEEE_TestCtrlIn_nFault ? ? ? ? 0x08
> -#define IEEE_TestCtrlIn_nAck ? ? ? ? 0x04
> -#define IEEE_TestCtrlIn_PSel ? ? ? ? 0x02
> -#define IEEE_TestCtrlIn_Busy ? ? ? ? 0x01
> -
> -#endif /* LANGUAGE == C */
> -
> -/*
> - * VGA Controller
> - *
> - * Registers
> - * ? ?VideoControl ? ?Video Control Register
> - * ? ?VgaTiming0 ? ?VGA Timing Register 0
> - * ? ?VgaTiming1 ? ?VGA Timing Register 1
> - * ? ?VgaTiming2 ? ?VGA Timing Register 2
> - * ? ?VgaTiming3 ? ?VGA Timing Register 3
> - * ? ?VgaBorder ? ? ? ?VGA Border Color Register
> - * ? ?VgaDBAR ? ? ? ?VGADMA Base Address Register
> - * ? ?VgaDCAR ? ? ? ?VGADMA Channel Current Address Register
> - * ? ?VgaStatus ? ? ? ?VGA Status Register
> - * ? ?VgaInterruptMask ? ?VGA Interrupt Mask Register
> - * ? ?VgaPalette ? ?VGA Palette Registers
> - * ? ?DacControl ? ?DAC Control Register
> - * ? ?VgaTest ? ? ? ?VGA Controller Test Register
> - */
> -
> -#define _VGA( x ) ? ?_SA1101( ( x ) + __VGA_CONTROL )
> -
> -#define _VideoControl ? ? ? ?_VGA( 0x0000 )
> -#define _VgaTiming0 ? ? ? ?_VGA( 0x0400 )
> -#define _VgaTiming1 ? ? ? ?_VGA( 0x0800 )
> -#define _VgaTiming2 ? ? ? ?_VGA( 0x0c00 )
> -#define _VgaTiming3 ? ? ? ?_VGA( 0x1000 )
> -#define _VgaBorder ? ? ? ?_VGA( 0x1400 )
> -#define _VgaDBAR ? ? ? ?_VGA( 0x1800 )
> -#define _VgaDCAR ? ? ? ?_VGA( 0x1c00 )
> -#define _VgaStatus ? ? ? ?_VGA( 0x2000 )
> -#define _VgaInterruptMask ? _VGA( 0x2400 )
> -#define _VgaPalette ? ? ? ?_VGA( 0x40000 )
> -#define _DacControl ? ? ? ?_VGA( 0x3000 )
> -#define _VgaTest ? ? ? ?_VGA( 0x2c00 )
> -
> -#if (LANGUAGE == C)
> -#define VideoControl ? (*((volatile Word *) SA1101_p2v (_VideoControl)))
> -#define VgaTiming0 ? ? (*((volatile Word *) SA1101_p2v (_VgaTiming0)))
> -#define VgaTiming1 ? ? (*((volatile Word *) SA1101_p2v (_VgaTiming1)))
> -#define VgaTiming2 ? ? (*((volatile Word *) SA1101_p2v (_VgaTiming2)))
> -#define VgaTiming3 ? ? (*((volatile Word *) SA1101_p2v (_VgaTiming3)))
> -#define VgaBorder ? ? ?(*((volatile Word *) SA1101_p2v (_VgaBorder)))
> -#define VgaDBAR ? ? ? ? ? (*((volatile Word *) SA1101_p2v (_VgaDBAR)))
> -#define VgaDCAR ? ? ? ? ? (*((volatile Word *) SA1101_p2v (_VgaDCAR)))
> -#define VgaStatus ? ? ?(*((volatile Word *) SA1101_p2v (_VgaStatus)))
> -#define VgaInterruptMask (*((volatile Word *) SA1101_p2v
> (_VgaInterruptMask)))
> -#define VgaPalette ? ? (*((volatile Word *) SA1101_p2v (_VgaPalette)))
> -#define DacControl ? ? (*((volatile Word *) SA1101_p2v (_DacControl)))
> -#define VgaTest ? ? ? ?(*((volatile Word *) SA1101_p2v (_VgaTest)))
> -
> -#define VideoControl_VgaEn ? ?0x00000000
> -#define VideoControl_BGR ? ? ?0x00000001
> -#define VideoControl_VCompVal Fld(2,2)
> -#define VideoControl_VgaReq ? Fld(4,4)
> -#define VideoControl_VBurstL ?Fld(4,8)
> -#define VideoControl_VMode ? ?(1<<12)
> -#define VideoControl_PalRead ?(1<<13)
> -
> -#define VgaTiming0_PPL ? ? ? ? ?Fld(6,2)
> -#define VgaTiming0_HSW ? ? ? ? ?Fld(8,8)
> -#define VgaTiming0_HFP ? ? ? ? ?Fld(8,16)
> -#define VgaTiming0_HBP ? ? ? ? ?Fld(8,24)
> -
> -#define VgaTiming1_LPS ? ? ? ? ?Fld(10,0)
> -#define VgaTiming1_VSW ? ? ? ? ?Fld(6,10)
> -#define VgaTiming1_VFP ? ? ? ? ?Fld(8,16)
> -#define VgaTiming1_VBP ? ? ? ? ?Fld(8,24)
> -
> -#define VgaTiming2_IVS ? ? ? ? ?0x01
> -#define VgaTiming2_IHS ? ? ? ? ?0x02
> -#define VgaTiming2_CVS ? ? ? ? ?0x04
> -#define VgaTiming2_CHS ? ? ? ? ?0x08
> -
> -#define VgaTiming3_HBS ? ? ? ? ?Fld(8,0)
> -#define VgaTiming3_HBE ? ? ? ? ?Fld(8,8)
> -#define VgaTiming3_VBS ? ? ? ? ?Fld(8,16)
> -#define VgaTiming3_VBE ? ? ? ? ?Fld(8,24)
> -
> -#define VgaBorder_BCOL ? ? ? ? ?Fld(24,0)
> -
> -#define VgaStatus_VFUF ? ? ? ? ?0x01
> -#define VgaStatus_VNext ? ? ? ? ?0x02
> -#define VgaStatus_VComp ? ? ? ? ?0x04
> -
> -#define VgaInterruptMask_VFUFMask ? 0x00
> -#define VgaInterruptMask_VNextMask ?0x01
> -#define VgaInterruptMask_VCompMask ?0x02
> -
> -#define VgaPalette_R ? ? ? ? ?Fld(8,0)
> -#define VgaPalette_G ? ? ? ? ?Fld(8,8)
> -#define VgaPalette_B ? ? ? ? ?Fld(8,16)
> -
> -#define DacControl_DACON ? ? ?0x0001
> -#define DacControl_COMPON ? ? 0x0002
> -#define DacControl_PEDON ? ? ?0x0004
> -#define DacControl_RTrim ? ? ?Fld(5,4)
> -#define DacControl_GTrim ? ? ?Fld(5,9)
> -#define DacControl_BTrim ? ? ?Fld(5,14)
> -
> -#define VgaTest_TDAC ? ? ? ? ?0x00
> -#define VgaTest_Datatest ? ? ?Fld(4,1)
> -#define VgaTest_DACTESTDAC ? ?0x10
> -#define VgaTest_DACTESTOUT ? ?Fld(3,5)
> -
> -#endif /* LANGUAGE == C */
> -
> -/*
> - * USB Host Interface Controller
> - *
> - * Registers
> - * ? ?Revision
> - * ? ?Control
> - * ? ?CommandStatus
> - * ? ?InterruptStatus
> - * ? ?InterruptEnable
> - * ? ?HCCA
> - * ? ?PeriodCurrentED
> - * ? ?ControlHeadED
> - * ? ?BulkHeadED
> - * ? ?BulkCurrentED
> - * ? ?DoneHead
> - * ? ?FmInterval
> - * ? ?FmRemaining
> - * ? ?FmNumber
> - * ? ?PeriodicStart
> - * ? ?LSThreshold
> - * ? ?RhDescriptorA
> - * ? ?RhDescriptorB
> - * ? ?RhStatus
> - * ? ?RhPortStatus
> - * ? ?USBStatus
> - * ? ?USBReset
> - * ? ?USTAR
> - * ? ?USWER
> - * ? ?USRFR
> - * ? ?USNFR
> - * ? ?USTCSR
> - * ? ?USSR
> - *
> - */
> -
> -#define _USB( x ) ? ?_SA1101( ( x ) + __USB_CONTROL )
> -
> -
> -#define _Revision ? ? ?_USB( 0x0000 )
> -#define _Control ? ? ?_USB( 0x0888 )
> -#define _CommandStatus ? ? ?_USB( 0x0c00 )
> -#define _InterruptStatus ?_USB( 0x1000 )
> -#define _InterruptEnable ?_USB( 0x1400 )
> -#define _HCCA ? ? ? ? ?_USB( 0x1800 )
> -#define _PeriodCurrentED ?_USB( 0x1c00 )
> -#define _ControlHeadED ? ? ?_USB( 0x2000 )
> -#define _BulkHeadED ? ? ?_USB( 0x2800 )
> -#define _BulkCurrentED ? ? ?_USB( 0x2c00 )
> -#define _DoneHead ? ? ?_USB( 0x3000 )
> -#define _FmInterval ? ? ?_USB( 0x3400 )
> -#define _FmRemaining ? ? ?_USB( 0x3800 )
> -#define _FmNumber ? ? ?_USB( 0x3c00 )
> -#define _PeriodicStart ? ? ?_USB( 0x4000 )
> -#define _LSThreshold ? ? ?_USB( 0x4400 )
> -#define _RhDescriptorA ? ? ?_USB( 0x4800 )
> -#define _RhDescriptorB ? ? ?_USB( 0x4c00 )
> -#define _RhStatus ? ? ?_USB( 0x5000 )
> -#define _RhPortStatus ? ? ?_USB( 0x5400 )
> -#define _USBStatus ? ? ?_USB( 0x11800 )
> -#define _USBReset ? ? ?_USB( 0x11c00 )
> -
> -#define _USTAR ? ? ? ? ?_USB( 0x10400 )
> -#define _USWER ? ? ? ? ?_USB( 0x10800 )
> -#define _USRFR ? ? ? ? ?_USB( 0x10c00 )
> -#define _USNFR ? ? ? ? ?_USB( 0x11000 )
> -#define _USTCSR ? ? ? ? ?_USB( 0x11400 )
> -#define _USSR ? ? ? ? ?_USB( 0x11800 )
> -
> -
> -#if (LANGUAGE == C)
> -
> -#define Revision ? ?(*((volatile Word *) SA1101_p2v (_Revision)))
> -#define Control ? ? ? ?(*((volatile Word *) SA1101_p2v (_Control)))
> -#define CommandStatus ? ?(*((volatile Word *) SA1101_p2v (_CommandStatus)))
> -#define InterruptStatus ? ?(*((volatile Word *) SA1101_p2v
> (_InterruptStatus)))
> -#define InterruptEnable ? ?(*((volatile Word *) SA1101_p2v
> (_InterruptEnable)))
> -#define HCCA ? ? ? ?(*((volatile Word *) SA1101_p2v (_HCCA)))
> -#define PeriodCurrentED ? ?(*((volatile Word *) SA1101_p2v
> (_PeriodCurrentED)))
> -#define ControlHeadED ? ?(*((volatile Word *) SA1101_p2v (_ControlHeadED)))
> -#define BulkHeadED ? ?(*((volatile Word *) SA1101_p2v (_BulkHeadED)))
> -#define BulkCurrentED ? ?(*((volatile Word *) SA1101_p2v (_BulkCurrentED)))
> -#define DoneHead ? ?(*((volatile Word *) SA1101_p2v (_DoneHead)))
> -#define FmInterval ? ?(*((volatile Word *) SA1101_p2v (_FmInterval)))
> -#define FmRemaining ? ?(*((volatile Word *) SA1101_p2v (_FmRemaining)))
> -#define FmNumber ? ?(*((volatile Word *) SA1101_p2v (_FmNumber)))
> -#define PeriodicStart ? ?(*((volatile Word *) SA1101_p2v (_PeriodicStart)))
> -#define LSThreshold ? ?(*((volatile Word *) SA1101_p2v (_LSThreshold)))
> -#define RhDescriptorA ? ?(*((volatile Word *) SA1101_p2v (_RhDescriptorA)))
> -#define RhDescriptorB ? ?(*((volatile Word *) SA1101_p2v (_RhDescriptorB)))
> -#define RhStatus ? ?(*((volatile Word *) SA1101_p2v (_RhStatus)))
> -#define RhPortStatus ? ?(*((volatile Word *) SA1101_p2v (_RhPortStatus)))
> -#define USBStatus ? ?(*((volatile Word *) SA1101_p2v (_USBStatus)))
> -#define USBReset ? ?(*((volatile Word *) SA1101_p2v (_USBReset)))
> -#define USTAR ? ? ? ?(*((volatile Word *) SA1101_p2v (_USTAR)))
> -#define USWER ? ? ? ?(*((volatile Word *) SA1101_p2v (_USWER)))
> -#define USRFR ? ? ? ?(*((volatile Word *) SA1101_p2v (_USRFR)))
> -#define USNFR ? ? ? ?(*((volatile Word *) SA1101_p2v (_USNFR)))
> -#define USTCSR ? ? ? ?(*((volatile Word *) SA1101_p2v (_USTCSR)))
> -#define USSR ? ? ? ?(*((volatile Word *) SA1101_p2v (_USSR)))
> -
> -
> -#define USBStatus_IrqHciRmtWkp ? ? ? ? (1<<7)
> -#define USBStatus_IrqHciBuffAcc ? ? ? ? (1<<8)
> -#define USBStatus_nIrqHciM ? ? ? ? (1<<9)
> -#define USBStatus_nHciMFClr ? ? ? ? (1<<10)
> -
> -#define USBReset_ForceIfReset ? ? ? ? 0x01
> -#define USBReset_ForceHcReset ? ? ? ? 0x02
> -#define USBReset_ClkGenReset ? ? ? ? 0x04
> -
> -#define USTCR_RdBstCntrl ? ? ? ? Fld(3,0)
> -#define USTCR_ByteEnable ? ? ? ? Fld(4,3)
> -#define USTCR_WriteEn ? ? ? ? ? ? (1<<7)
> -#define USTCR_FifoCir ? ? ? ? ? ? (1<<8)
> -#define USTCR_TestXferSel ? ? ? ? (1<<9)
> -#define USTCR_FifoCirAtEnd ? ? ? ? (1<<10)
> -#define USTCR_nSimScaleDownClk ? ? ? ? (1<<11)
> -
> -#define USSR_nAppMDEmpty ? ? ? ? 0x01
> -#define USSR_nAppMDFirst ? ? ? ? 0x02
> -#define USSR_nAppMDLast ? ? ? ? ? ? 0x04
> -#define USSR_nAppMDFull ? ? ? ? ? ? 0x08
> -#define USSR_nAppMAFull ? ? ? ? ? ? 0x10
> -#define USSR_XferReq ? ? ? ? ? ? 0x20
> -#define USSR_XferEnd ? ? ? ? ? ? 0x40
> -
> -#endif /* LANGUAGE == C */
> -
> -
> -/*
> - * Interrupt Controller
> - *
> - * Registers
> - * ? ?INTTEST0 ? ? ? ?Test register 0
> - * ? ?INTTEST1 ? ? ? ?Test register 1
> - * ? ?INTENABLE0 ? ?Interrupt Enable register 0
> - * ? ?INTENABLE1 ? ?Interrupt Enable register 1
> - * ? ?INTPOL0 ? ? ? ?Interrupt Polarity selection 0
> - * ? ?INTPOL1 ? ? ? ?Interrupt Polarity selection 1
> - * ? ?INTTSTSEL ? ? ? ?Interrupt source selection
> - * ? ?INTSTATCLR0 ? ?Interrupt Status 0
> - * ? ?INTSTATCLR1 ? ?Interrupt Status 1
> - * ? ?INTSET0 ? ? ? ?Interrupt Set 0
> - * ? ?INTSET1 ? ? ? ?Interrupt Set 1
> - */
> -
> -#define _INT( x ) ? ?_SA1101( ( x ) + __INTERRUPT_CONTROL)
> -
> -#define _INTTEST0 ? ?_INT( 0x1000 )
> -#define _INTTEST1 ? ?_INT( 0x1400 )
> -#define _INTENABLE0 ? ?_INT( 0x2000 )
> -#define _INTENABLE1 ? ?_INT( 0x2400 )
> -#define _INTPOL0 ? ?_INT( 0x3000 )
> -#define _INTPOL1 ? ?_INT( 0x3400 )
> -#define _INTTSTSEL ? ? ? ? _INT( 0x5000 )
> -#define _INTSTATCLR0 ? ?_INT( 0x6000 )
> -#define _INTSTATCLR1 ? ?_INT( 0x6400 )
> -#define _INTSET0 ? ?_INT( 0x7000 )
> -#define _INTSET1 ? ?_INT( 0x7400 )
> -
> -#if ( LANGUAGE == C )
> -#define INTTEST0 ? ?(*((volatile Word *) SA1101_p2v (_INTTEST0)))
> -#define INTTEST1 ? ?(*((volatile Word *) SA1101_p2v (_INTTEST1)))
> -#define INTENABLE0 ? ?(*((volatile Word *) SA1101_p2v (_INTENABLE0)))
> -#define INTENABLE1 ? ?(*((volatile Word *) SA1101_p2v (_INTENABLE1)))
> -#define INTPOL0 ? ? ? ?(*((volatile Word *) SA1101_p2v (_INTPOL0)))
> -#define INTPOL1 ? ? ? ?(*((volatile Word *) SA1101_p2v (_INTPOL1)))
> -#define INTTSTSEL ? ?(*((volatile Word *) SA1101_p2v (_INTTSTSEL)))
> -#define INTSTATCLR0 ? ?(*((volatile Word *) SA1101_p2v (_INTSTATCLR0)))
> -#define INTSTATCLR1 ? ?(*((volatile Word *) SA1101_p2v (_INTSTATCLR1)))
> -#define INTSET0 ? ? ? ?(*((volatile Word *) SA1101_p2v (_INTSET0)))
> -#define INTSET1 ? ? ? ?(*((volatile Word *) SA1101_p2v (_INTSET1)))
> -
> -#endif /* LANGUAGE == C */
> -
> -/*
> - * PS/2 Trackpad and Mouse Interfaces
> - *
> - * Registers ? (prefix kbd applies to trackpad interface, mse to mouse)
> - * ? ?KBDCR ? ? ? ?Control Register
> - * ? ?KBDSTAT ? ? ? ?Status Register
> - * ? ?KBDDATA ? ? ? ?Transmit/Receive Data register
> - * ? ?KBDCLKDIV ? ? ? ?Clock Division Register
> - * ? ?KBDPRECNT ? ? ? ?Clock Precount Register
> - * ? ?KBDTEST1 ? ? ? ?Test register 1
> - * ? ?KBDTEST2 ? ? ? ?Test register 2
> - * ? ?KBDTEST3 ? ? ? ?Test register 3
> - * ? ?KBDTEST4 ? ? ? ?Test register 4
> - * ? ?MSECR
> - * ? ?MSESTAT
> - * ? ?MSEDATA
> - * ? ?MSECLKDIV
> - * ? ?MSEPRECNT
> - * ? ?MSETEST1
> - * ? ?MSETEST2
> - * ? ?MSETEST3
> - * ? ?MSETEST4
> - *
> - */
> -
> -#define _KBD( x ) ? ?_SA1101( ( x ) + __TRACK_INTERFACE )
> -#define _MSE( x ) ? ?_SA1101( ( x ) + __MOUSE_INTERFACE )
> -
> -#define _KBDCR ? ? ? ?_KBD( 0x0000 )
> -#define _KBDSTAT ? ?_KBD( 0x0400 )
> -#define _KBDDATA ? ?_KBD( 0x0800 )
> -#define _KBDCLKDIV ? ?_KBD( 0x0c00 )
> -#define _KBDPRECNT ? ?_KBD( 0x1000 )
> -#define ? ?_KBDTEST1 ? ?_KBD( 0x2000 )
> -#define _KBDTEST2 ? ?_KBD( 0x2400 )
> -#define _KBDTEST3 ? ?_KBD( 0x2800 )
> -#define _KBDTEST4 ? ?_KBD( 0x2c00 )
> -#define _MSECR ? ? ? ?_MSE( 0x0000 )
> -#define _MSESTAT ? ?_MSE( 0x0400 )
> -#define _MSEDATA ? ?_MSE( 0x0800 )
> -#define _MSECLKDIV ? ?_MSE( 0x0c00 )
> -#define _MSEPRECNT ? ?_MSE( 0x1000 )
> -#define ? ?_MSETEST1 ? ?_MSE( 0x2000 )
> -#define _MSETEST2 ? ?_MSE( 0x2400 )
> -#define _MSETEST3 ? ?_MSE( 0x2800 )
> -#define _MSETEST4 ? ?_MSE( 0x2c00 )
> -
> -#if ( LANGUAGE == C )
> -
> -#define KBDCR ? ? ? ?(*((volatile Word *) SA1101_p2v (_KBDCR)))
> -#define KBDSTAT ? ? ? ?(*((volatile Word *) SA1101_p2v (_KBDSTAT)))
> -#define KBDDATA ? ? ? ?(*((volatile Word *) SA1101_p2v (_KBDDATA)))
> -#define KBDCLKDIV ? (*((volatile Word *) SA1101_p2v (_KBDCLKDIV)))
> -#define KBDPRECNT ? (*((volatile Word *) SA1101_p2v (_KBDPRECNT)))
> -#define KBDTEST1 ? ?(*((volatile Word *) SA1101_p2v (_KBDTEST1)))
> -#define KBDTEST2 ? ?(*((volatile Word *) SA1101_p2v (_KBDTEST2)))
> -#define KBDTEST3 ? ?(*((volatile Word *) SA1101_p2v (_KBDTEST3)))
> -#define KBDTEST4 ? ?(*((volatile Word *) SA1101_p2v (_KBDTEST4)))
> -#define MSECR ? ? ? ?(*((volatile Word *) SA1101_p2v (_MSECR)))
> -#define MSESTAT ? ? ? ?(*((volatile Word *) SA1101_p2v (_MSESTAT)))
> -#define MSEDATA ? ? ? ?(*((volatile Word *) SA1101_p2v (_MSEDATA)))
> -#define MSECLKDIV ? (*((volatile Word *) SA1101_p2v (_MSECLKDIV)))
> -#define MSEPRECNT ? (*((volatile Word *) SA1101_p2v (_MSEPRECNT)))
> -#define MSETEST1 ? ?(*((volatile Word *) SA1101_p2v (_MSETEST1)))
> -#define MSETEST2 ? ?(*((volatile Word *) SA1101_p2v (_MSETEST2)))
> -#define MSETEST3 ? ?(*((volatile Word *) SA1101_p2v (_MSETEST3)))
> -#define MSETEST4 ? ?(*((volatile Word *) SA1101_p2v (_MSETEST4)))
> -
> -
> -#define KBDCR_ENA ? ? ? ? 0x08
> -#define KBDCR_FKD ? ? ? ? 0x02
> -#define KBDCR_FKC ? ? ? ? 0x01
> -
> -#define KBDSTAT_TXE ? ? ? ? 0x80
> -#define KBDSTAT_TXB ? ? ? ? 0x40
> -#define KBDSTAT_RXF ? ? ? ? 0x20
> -#define KBDSTAT_RXB ? ? ? ? 0x10
> -#define KBDSTAT_ENA ? ? ? ? 0x08
> -#define KBDSTAT_RXP ? ? ? ? 0x04
> -#define KBDSTAT_KBD ? ? ? ? 0x02
> -#define KBDSTAT_KBC ? ? ? ? 0x01
> -
> -#define KBDCLKDIV_DivVal ? ? Fld(4,0)
> -
> -#define MSECR_ENA ? ? ? ? 0x08
> -#define MSECR_FKD ? ? ? ? 0x02
> -#define MSECR_FKC ? ? ? ? 0x01
> -
> -#define MSESTAT_TXE ? ? ? ? 0x80
> -#define MSESTAT_TXB ? ? ? ? 0x40
> -#define MSESTAT_RXF ? ? ? ? 0x20
> -#define MSESTAT_RXB ? ? ? ? 0x10
> -#define MSESTAT_ENA ? ? ? ? 0x08
> -#define MSESTAT_RXP ? ? ? ? 0x04
> -#define MSESTAT_MSD ? ? ? ? 0x02
> -#define MSESTAT_MSC ? ? ? ? 0x01
> -
> -#define MSECLKDIV_DivVal ? ? Fld(4,0)
> -
> -#define KBDTEST1_CD ? ? ? ? 0x80
> -#define KBDTEST1_RC1 ? ? ? ? 0x40
> -#define KBDTEST1_MC ? ? ? ? 0x20
> -#define KBDTEST1_C ? ? ? ? Fld(2,3)
> -#define KBDTEST1_T2 ? ? ? ? 0x40
> -#define KBDTEST1_T1 ? ? ? ? 0x20
> -#define KBDTEST1_T0 ? ? ? ? 0x10
> -#define KBDTEST2_TICBnRES ? ? 0x08
> -#define KBDTEST2_RKC ? ? ? ? 0x04
> -#define KBDTEST2_RKD ? ? ? ? 0x02
> -#define KBDTEST2_SEL ? ? ? ? 0x01
> -#define KBDTEST3_ms_16 ? ? ? ? 0x80
> -#define KBDTEST3_us_64 ? ? ? ? 0x40
> -#define KBDTEST3_us_16 ? ? ? ? 0x20
> -#define KBDTEST3_DIV8 ? ? ? ? 0x10
> -#define KBDTEST3_DIn ? ? ? ? 0x08
> -#define KBDTEST3_CIn ? ? ? ? 0x04
> -#define KBDTEST3_KD ? ? ? ? 0x02
> -#define KBDTEST3_KC ? ? ? ? 0x01
> -#define KBDTEST4_BC12 ? ? ? ? 0x80
> -#define KBDTEST4_BC11 ? ? ? ? 0x40
> -#define KBDTEST4_TRES ? ? ? ? 0x20
> -#define KBDTEST4_CLKOE ? ? ? ? 0x10
> -#define KBDTEST4_CRES ? ? ? ? 0x08
> -#define KBDTEST4_RXB ? ? ? ? 0x04
> -#define KBDTEST4_TXB ? ? ? ? 0x02
> -#define KBDTEST4_SRX ? ? ? ? 0x01
> -
> -#define MSETEST1_CD ? ? ? ? 0x80
> -#define MSETEST1_RC1 ? ? ? ? 0x40
> -#define MSETEST1_MC ? ? ? ? 0x20
> -#define MSETEST1_C ? ? ? ? Fld(2,3)
> -#define MSETEST1_T2 ? ? ? ? 0x40
> -#define MSETEST1_T1 ? ? ? ? 0x20
> -#define MSETEST1_T0 ? ? ? ? 0x10
> -#define MSETEST2_TICBnRES ? ? 0x08
> -#define MSETEST2_RKC ? ? ? ? 0x04
> -#define MSETEST2_RKD ? ? ? ? 0x02
> -#define MSETEST2_SEL ? ? ? ? 0x01
> -#define MSETEST3_ms_16 ? ? ? ? 0x80
> -#define MSETEST3_us_64 ? ? ? ? 0x40
> -#define MSETEST3_us_16 ? ? ? ? 0x20
> -#define MSETEST3_DIV8 ? ? ? ? 0x10
> -#define MSETEST3_DIn ? ? ? ? 0x08
> -#define MSETEST3_CIn ? ? ? ? 0x04
> -#define MSETEST3_KD ? ? ? ? 0x02
> -#define MSETEST3_KC ? ? ? ? 0x01
> -#define MSETEST4_BC12 ? ? ? ? 0x80
> -#define MSETEST4_BC11 ? ? ? ? 0x40
> -#define MSETEST4_TRES ? ? ? ? 0x20
> -#define MSETEST4_CLKOE ? ? ? ? 0x10
> -#define MSETEST4_CRES ? ? ? ? 0x08
> -#define MSETEST4_RXB ? ? ? ? 0x04
> -#define MSETEST4_TXB ? ? ? ? 0x02
> -#define MSETEST4_SRX ? ? ? ? 0x01
> -
> -#endif ?/* LANGUAGE == C */
> -
> -
> -/*
> - * General-Purpose I/O Interface
> - *
> - * Registers
> - * ? ?PADWR ? ?Port A Data Write Register
> - * ? ?PBDWR ? ?Port B Data Write Register
> - * ? ?PADRR ? ?Port A Data Read Register
> - * ? ?PBDRR ? ?Port B Data Read Register
> - * ? ?PADDR ? ?Port A Data Direction Register
> - * ? ?PBDDR ? ?Port B Data Direction Register
> - * ? ?PASSR ? ?Port A Sleep State Register
> - * ? ?PBSSR ? ?Port B Sleep State Register
> - *
> - */
> -
> -#define _PIO( x ) ? ? ?_SA1101( ( x ) + __GPIO_INTERFACE )
> -
> -#define _PADWR ? ? ? ? ? _PIO( 0x0000 )
> -#define _PBDWR ? ? ? ? ? _PIO( 0x0400 )
> -#define _PADRR ? ? ? ? ? _PIO( 0x0000 )
> -#define _PBDRR ? ? ? ? ? _PIO( 0x0400 )
> -#define _PADDR ? ? ? ? ? _PIO( 0x0800 )
> -#define _PBDDR ? ? ? ? ? _PIO( 0x0c00 )
> -#define _PASSR ? ? ? ? ? _PIO( 0x1000 )
> -#define _PBSSR ? ? ? ? ? _PIO( 0x1400 )
> -
> -
> -#if ( LANGUAGE == C )
> -
> -
> -#define PADWR ? ? ? ?(*((volatile Word *) SA1101_p2v (_PADWR)))
> -#define PBDWR ? ? ? ?(*((volatile Word *) SA1101_p2v (_PBDWR)))
> -#define PADRR ? ? ? ?(*((volatile Word *) SA1101_p2v (_PADRR)))
> -#define PBDRR ? ? ? ?(*((volatile Word *) SA1101_p2v (_PBDRR)))
> -#define PADDR ? ? ? ?(*((volatile Word *) SA1101_p2v (_PADDR)))
> -#define PBDDR ? ? ? ?(*((volatile Word *) SA1101_p2v (_PBDDR)))
> -#define PASSR ? ? ? ?(*((volatile Word *) SA1101_p2v (_PASSR)))
> -#define PBSSR ? ? ? ?(*((volatile Word *) SA1101_p2v (_PBSSR)))
> -
> -#endif
> -
> -
> -
> -/*
> - * Keypad Interface
> - *
> - * Registers
> - * ? ?PXDWR
> - * ? ?PXDRR
> - * ? ?PYDWR
> - * ? ?PYDRR
> - *
> - */
> -
> -#define _KEYPAD( x ) ? ?_SA1101( ( x ) + __KEYPAD_INTERFACE )
> -
> -#define _PXDWR ? ? ? _KEYPAD( 0x0000 )
> -#define _PXDRR ? ? ? _KEYPAD( 0x0000 )
> -#define _PYDWR ? ? ? _KEYPAD( 0x0400 )
> -#define _PYDRR ? ? ? _KEYPAD( 0x0400 )
> -
> -#if ( LANGUAGE == C )
> -
> -
> -#define PXDWR ? ? ? ?(*((volatile Word *) SA1101_p2v (_PXDWR)))
> -#define PXDRR ? ? ? ?(*((volatile Word *) SA1101_p2v (_PXDRR)))
> -#define PYDWR ? ? ? ?(*((volatile Word *) SA1101_p2v (_PYDWR)))
> -#define PYDRR ? ? ? ?(*((volatile Word *) SA1101_p2v (_PYDRR)))
> -
> -#endif
> -
> -
> -
> -/*
> - * PCMCIA Interface
> - *
> - * Registers
> - * ? ?PCSR ? ?Status Register
> - * ? ?PCCR ? ?Control Register
> - * ? ?PCSSR ? ?Sleep State Register
> - *
> - */
> -
> -#define _CARD( x ) ? ?_SA1101( ( x ) + __PCMCIA_INTERFACE )
> -
> -#define _PCSR ? ? ? _CARD( 0x0000 )
> -#define _PCCR ? ? ? _CARD( 0x0400 )
> -#define _PCSSR ? ? ? _CARD( 0x0800 )
> -
> -#if ( LANGUAGE == C )
> -#define PCSR ? ?(*((volatile Word *) SA1101_p2v (_PCSR)))
> -#define PCCR ? ?(*((volatile Word *) SA1101_p2v (_PCCR)))
> -#define PCSSR ? ?(*((volatile Word *) SA1101_p2v (_PCSSR)))
> -
> -#define PCSR_S0_ready ? ? ? ?0x0001
> -#define PCSR_S1_ready ? ? ? ?0x0002
> -#define PCSR_S0_detected ? ?0x0004
> -#define PCSR_S1_detected ? ?0x0008
> -#define PCSR_S0_VS1 ? ? ? ?0x0010
> -#define PCSR_S0_VS2 ? ? ? ?0x0020
> -#define PCSR_S1_VS1 ? ? ? ?0x0040
> -#define PCSR_S1_VS2 ? ? ? ?0x0080
> -#define PCSR_S0_WP ? ? ? ?0x0100
> -#define PCSR_S1_WP ? ? ? ?0x0200
> -#define PCSR_S0_BVD1_nSTSCHG ? ?0x0400
> -#define PCSR_S0_BVD2_nSPKR ? ?0x0800
> -#define PCSR_S1_BVD1_nSTSCHG ? ?0x1000
> -#define PCSR_S1_BVD2_nSPKR ? ?0x2000
> -
> -#define PCCR_S0_VPP0 ? ? ? ?0x0001
> -#define PCCR_S0_VPP1 ? ? ? ?0x0002
> -#define PCCR_S0_VCC0 ? ? ? ?0x0004
> -#define PCCR_S0_VCC1 ? ? ? ?0x0008
> -#define PCCR_S1_VPP0 ? ? ? ?0x0010
> -#define PCCR_S1_VPP1 ? ? ? ?0x0020
> -#define PCCR_S1_VCC0 ? ? ? ?0x0040
> -#define PCCR_S1_VCC1 ? ? ? ?0x0080
> -#define PCCR_S0_reset ? ? ? ?0x0100
> -#define PCCR_S1_reset ? ? ? ?0x0200
> -#define PCCR_S0_float ? ? ? ?0x0400
> -#define PCCR_S1_float ? ? ? ?0x0800
> -
> -#define PCSSR_S0_VCC0 ? ? ? ?0x0001
> -#define PCSSR_S0_VCC1 ? ? ? ?0x0002
> -#define PCSSR_S0_VPP0 ? ? ? ?0x0004
> -#define PCSSR_S0_VPP1 ? ? ? ?0x0008
> -#define PCSSR_S0_control ? ?0x0010
> -#define PCSSR_S1_VCC0 ? ? ? ?0x0020
> -#define PCSSR_S1_VCC1 ? ? ? ?0x0040
> -#define PCSSR_S1_VPP0 ? ? ? ?0x0080
> -#define PCSSR_S1_VPP1 ? ? ? ?0x0100
> -#define PCSSR_S1_control ? ?0x0200
> -
> -#endif
> -
> -#undef C
> -#undef Assembly
> diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h
> b/arch/arm/mach-sa1100/include/mach/hardware.h
> index 99f5856..ee5d2bb 100644
> --- a/arch/arm/mach-sa1100/include/mach/hardware.h
> +++ b/arch/arm/mach-sa1100/include/mach/hardware.h
> @@ -72,8 +72,4 @@ static inline unsigned long get_clock_tick_rate(void)
>
> ?#include "SA-1100.h"
>
> -#ifdef CONFIG_SA1101
> -#include "SA-1101.h"
> -#endif
> -
> ?#endif ?/* _ASM_ARCH_HARDWARE_H */
> diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
> index 60acf9e..bb24011 100644
> --- a/arch/arm/mach-u300/clock.c
> +++ b/arch/arm/mach-u300/clock.c
> @@ -216,85 +216,6 @@ static u16 syscon_clk_get_rate(void)
> ? ? return val;
> ?}
>
> -#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
> -static void enable_i2s0_vcxo(void)
> -{
> - ? ?u16 val;
> - ? ?unsigned long iflags;
> -
> - ? ?spin_lock_irqsave(&syscon_clkreg_lock, iflags);
> - ? ?/* Set I2S0 to use the VCXO 26 MHz clock */
> - ? ?val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - ? ?val |= U300_SYSCON_CCR_TURN_VCXO_ON;
> - ? ?writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - ? ?val |= U300_SYSCON_CCR_I2S0_USE_VCXO;
> - ? ?writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - ? ?val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
> - ? ?val |= U300_SYSCON_CEFR_I2S0_CLK_EN;
> - ? ?writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
> - ? ?spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
> -}
> -
> -static void enable_i2s1_vcxo(void)
> -{
> - ? ?u16 val;
> - ? ?unsigned long iflags;
> -
> - ? ?spin_lock_irqsave(&syscon_clkreg_lock, iflags);
> - ? ?/* Set I2S1 to use the VCXO 26 MHz clock */
> - ? ?val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - ? ?val |= U300_SYSCON_CCR_TURN_VCXO_ON;
> - ? ?writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - ? ?val |= U300_SYSCON_CCR_I2S1_USE_VCXO;
> - ? ?writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - ? ?val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
> - ? ?val |= U300_SYSCON_CEFR_I2S1_CLK_EN;
> - ? ?writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
> - ? ?spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
> -}
> -
> -static void disable_i2s0_vcxo(void)
> -{
> - ? ?u16 val;
> - ? ?unsigned long iflags;
> -
> - ? ?spin_lock_irqsave(&syscon_clkreg_lock, iflags);
> - ? ?/* Disable I2S0 use of the VCXO 26 MHz clock */
> - ? ?val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - ? ?val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO;
> - ? ?writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - ? ?/* Deactivate VCXO if noone else is using VCXO */
> - ? ?if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO))
> - ? ? ? ?val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
> - ? ?writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - ? ?val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
> - ? ?val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
> - ? ?writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
> - ? ?spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
> -}
> -
> -static void disable_i2s1_vcxo(void)
> -{
> - ? ?u16 val;
> - ? ?unsigned long iflags;
> -
> - ? ?spin_lock_irqsave(&syscon_clkreg_lock, iflags);
> - ? ?/* Disable I2S1 use of the VCXO 26 MHz clock */
> - ? ?val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - ? ?val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO;
> - ? ?writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - ? ?/* Deactivate VCXO if noone else is using VCXO */
> - ? ?if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO))
> - ? ? ? ?val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
> - ? ?writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - ? ?val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
> - ? ?val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
> - ? ?writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
> - ? ?spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
> -}
> -#endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */
> -
> -
> ?static void syscon_clk_rate_set_mclk(unsigned long rate)
> ?{
> ? ? u16 val;
> @@ -383,12 +304,6 @@ void clk_disable(struct clk *clk)
> ? ? ? ? if (likely((u32)clk->parent))
> ? ? ? ? ? ? clk_disable(clk->parent);
> ? ? }
> -#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
> - ? ?if (unlikely(!strcmp(clk->name, "I2S0")))
> - ? ? ? ?disable_i2s0_vcxo();
> - ? ?if (unlikely(!strcmp(clk->name, "I2S1")))
> - ? ? ? ?disable_i2s1_vcxo();
> -#endif
> ? ? spin_unlock_irqrestore(&clk->lock, iflags);
> ?}
> ?EXPORT_SYMBOL(clk_disable);
> @@ -411,12 +326,6 @@ int clk_enable(struct clk *clk)
> ? ? ? ? ? ? /* clocks without enable function are always on */
> ? ? ? ? ? ? if (clk->enable)
> ? ? ? ? ? ? ? ? clk->enable(clk);
> -#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
> - ? ? ? ? ? ?if (unlikely(!strcmp(clk->name, "I2S0")))
> - ? ? ? ? ? ? ? ?enable_i2s0_vcxo();
> - ? ? ? ? ? ?if (unlikely(!strcmp(clk->name, "I2S1")))
> - ? ? ? ? ? ? ? ?enable_i2s1_vcxo();
> -#endif
> ? ? ? ? }
> ? ? }
> ? ? spin_unlock_irqrestore(&clk->lock, iflags);
> diff --git a/arch/arm/plat-mxc/include/mach/mx51.h
> b/arch/arm/plat-mxc/include/mach/mx51.h
> index 5aad344..fd5ec07 100644
> --- a/arch/arm/plat-mxc/include/mach/mx51.h
> +++ b/arch/arm/plat-mxc/include/mach/mx51.h
> @@ -149,11 +149,7 @@
> ?#define MX51_MXC_DMA_CHANNEL_SSI1_RX ? ?MXC_DMA_DYNAMIC_CHANNEL
> ?#define MX51_MXC_DMA_CHANNEL_SSI1_TX ? ?MXC_DMA_DYNAMIC_CHANNEL
> ?#define MX51_MXC_DMA_CHANNEL_SSI2_RX ? ?MXC_DMA_DYNAMIC_CHANNEL
> -#ifdef CONFIG_SDMA_IRAM
> -#define MX51_MXC_DMA_CHANNEL_SSI2_TX ? ?(MX51_MXC_DMA_CHANNEL_IRAM + 1)
> -#else ? ? ? ? ? ? ? ?/*CONFIG_SDMA_IRAM */
> ?#define MX51_MXC_DMA_CHANNEL_SSI2_TX ? ?MXC_DMA_DYNAMIC_CHANNEL
> -#endif ? ? ? ? ? ? ? ?/*CONFIG_SDMA_IRAM */
> ?#define MX51_MXC_DMA_CHANNEL_CSPI1_RX ? ?MXC_DMA_DYNAMIC_CHANNEL
> ?#define MX51_MXC_DMA_CHANNEL_CSPI1_TX ? ?MXC_DMA_DYNAMIC_CHANNEL
> ?#define MX51_MXC_DMA_CHANNEL_CSPI2_RX ? ?MXC_DMA_DYNAMIC_CHANNEL
> diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
> index bda8682..2956d3e 100644
> --- a/arch/m32r/kernel/time.c
> +++ b/arch/m32r/kernel/time.c
> @@ -33,13 +33,9 @@
>
> ?#include <asm/hw_irq.h>
>
> -#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
> +#if defined(CONFIG_RTC_DRV_CMOS)
> ?/* this needs a better home */
> ?DEFINE_SPINLOCK(rtc_lock);
> -
> -#ifdef CONFIG_RTC_DRV_CMOS_MODULE
> -EXPORT_SYMBOL(rtc_lock);
> -#endif
> ?#endif ?/* pc-style 'CMOS' RTC support */
>
> ?#ifdef CONFIG_SMP
> diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c
> index afad677..cd0414a 100644
> --- a/drivers/acpi/proc.c
> +++ b/drivers/acpi/proc.c
> @@ -23,7 +23,7 @@
>
> ?ACPI_MODULE_NAME("sleep")
>
> -#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) ||
> !defined(CONFIG_X86)
> +#if defined(CONFIG_RTC_DRV_CMOS) || !defined(CONFIG_X86)
> ?/* use /sys/class/rtc/rtcX/wakealarm instead; it's not ACPI-specific */
> ?#else
> ?#define ? ?HAVE_ACPI_LEGACY_ALARM
>
>
^ permalink raw reply [flat|nested] 36+ messages in thread* Re: [RFC] Removal of dead code from arch/arm/*
@ 2010-10-21 0:58 ` Eric Miao
0 siblings, 0 replies; 36+ messages in thread
From: Eric Miao @ 2010-10-21 0:58 UTC (permalink / raw)
To: N.P.S.; +Cc: Russell King, linux-arm-kernel, linux-kernel
On Thu, Oct 21, 2010 at 8:39 AM, N.P.S.
<napohybelskurwysynom2010@gmail.com> wrote:
> W dniu 2010-10-21 02:32, Eric Miao pisze:
>>
>> On Thu, Oct 21, 2010 at 8:23 AM, Zimny Lech
>> <napohybelskurwysynom2010@gmail.com> wrote:
>>>
>>> Hi,
>>>
>>> I will begin testing this, I would like to know your opinion about this
>>> patches
>>> git pull git://github.com/napohybelskurwysynom2010/Linux-2.6-nps.git
>>> rodc1
>>
>> Would be great if you can post the patches instead of letting people
>> figuring out
>> how to peek into your changes? (although a combination of "git remote add"
>> +
>> "git fetch" + "git log<your remote branch>" can do the trick, not that
>> straight
>> forward)
>
> git branch test
> git checkout test
> git pull something
> git diff master
> ?
This wouldn't be very nice since git-pull is actually a merge and you don't
know if the remote merges cleanly and git diff probably won't have a good
result if it's not a fast-forward-able branch.
>
> Andrew Morton said that my mail client is sending malformed patches - I
> didn't fixed it yet, sorry
>
>
> diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
> index 38c261f..fd30b75 100644
> --- a/arch/arm/kernel/time.c
> +++ b/arch/arm/kernel/time.c
> @@ -37,13 +37,9 @@
> */
> struct sys_timer *system_timer;
>
> -#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
> +#if defined(CONFIG_RTC_DRV_CMOS)
> /* this needs a better home */
> DEFINE_SPINLOCK(rtc_lock);
> -
> -#ifdef CONFIG_RTC_DRV_CMOS_MODULE
> -EXPORT_SYMBOL(rtc_lock);
> -#endif
> #endif /* pc-style 'CMOS' RTC support */
>
> /* change this if you have some constant time drift */
> diff --git a/arch/arm/mach-omap1/board-sx1.c
> b/arch/arm/mach-omap1/board-sx1.c
> index 2eb148b..a0ea190 100644
> --- a/arch/arm/mach-omap1/board-sx1.c
> +++ b/arch/arm/mach-omap1/board-sx1.c
> @@ -295,32 +295,6 @@ static struct physmap_flash_data sx1_flash_data = {
> .nr_parts = ARRAY_SIZE(sx1_partitions),
> };
>
> -#ifdef CONFIG_SX1_OLD_FLASH
> -/* MTD Intel StrataFlash - old flashes */
> -static struct resource sx1_old_flash_resource[] = {
> - [0] = {
> - .start = OMAP_CS0_PHYS, /* Physical */
> - .end = OMAP_CS0_PHYS + SZ_16M - 1,,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = OMAP_CS1_PHYS,
> - .end = OMAP_CS1_PHYS + SZ_8M - 1,
> - .flags = IORESOURCE_MEM,
> - },
> -};
> -
> -static struct platform_device sx1_flash_device = {
> - .name = "physmap-flash",
> - .id = 0,
> - .dev = {
> - .platform_data = &sx1_flash_data,
> - },
> - .num_resources = 2,
> - .resource = &sx1_old_flash_resource,
> -};
> -#else
> -/* MTD Intel 4000 flash - new flashes */
> static struct resource sx1_new_flash_resource = {
> .start = OMAP_CS0_PHYS,
> .end = OMAP_CS0_PHYS + SZ_32M - 1,
> @@ -336,7 +310,6 @@ static struct platform_device sx1_flash_device = {
> .num_resources = 1,
> .resource = &sx1_new_flash_resource,
> };
> -#endif
>
> /*----------- USB -------------------------*/
>
> diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
> index b1d3f9f..f5c7c26 100644
> --- a/arch/arm/mach-omap1/pm.c
> +++ b/arch/arm/mach-omap1/pm.c
> @@ -122,13 +122,6 @@ void omap1_pm_idle(void)
> #else
>
> while (enable_dyn_sleep) {
> -
> -#ifdef CONFIG_CBUS_TAHVO_USB
> - extern int vbus_active;
> - /* Clock requirements? */
> - if (vbus_active)
> - break;
> -#endif
> do_sleep = 1;
> break;
> }
> diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h
> b/arch/arm/mach-s3c2410/include/mach/gpio.h
> index b649bf2..a37d274 100644
> --- a/arch/arm/mach-s3c2410/include/mach/gpio.h
> +++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
> @@ -30,8 +30,4 @@
> #include <mach/gpio-nrs.h>
> #include <mach/gpio-fns.h>
>
> -#ifdef CONFIG_CPU_S3C24XX
> -#define S3C_GPIO_END (S3C2410_GPIO_BANKJ + 32)
> -#else
> #define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32)
> -#endif
> diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c
> b/arch/arm/mach-s3c2443/mach-smdk2443.c
> index 4c863d3..9bc6cb3 100644
> --- a/arch/arm/mach-s3c2443/mach-smdk2443.c
> +++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
> @@ -106,9 +106,6 @@ static struct platform_device *smdk2443_devices[]
> __initdata = {
> &s3c_device_wdt,
> &s3c_device_i2c0,
> &s3c_device_hsmmc0,
> -#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
> - &s3c_device_ac97,
> -#endif
> };
>
> static void __init smdk2443_map_io(void)
> @@ -121,11 +118,6 @@ static void __init smdk2443_map_io(void)
> static void __init smdk2443_machine_init(void)
> {
> s3c_i2c0_set_platdata(NULL);
> -
> -#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
> - s3c24xx_ac97_setup_gpio(S3C24XX_AC97_GPE0);
> -#endif
> -
> platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
> smdk_machine_init();
> }
> diff --git a/arch/arm/mach-sa1100/include/mach/SA-1101.h
> b/arch/arm/mach-sa1100/include/mach/SA-1101.h
> deleted file mode 100644
> index 5d2ad7d..0000000
> --- a/arch/arm/mach-sa1100/include/mach/SA-1101.h
> +++ /dev/null
> @@ -1,925 +0,0 @@
> -/*
> - * SA-1101.h
> - *
> - * Copyright (c) Peter Danielsson 1999
> - *
> - * Definition of constants related to the sa1101
> - * support chip for the sa1100
> - *
> - */
> -
> -
> -/* Be sure that virtual mapping is defined right */
> -#ifndef __ASM_ARCH_HARDWARE_H
> -#error You must include hardware.h not SA-1101.h
> -#endif
> -
> -#ifndef SA1101_BASE
> -#error You must define SA-1101 physical base address
> -#endif
> -
> -#ifndef LANGUAGE
> -# ifdef __ASSEMBLY__
> -# define LANGUAGE Assembly
> -# else
> -# define LANGUAGE C
> -# endif
> -#endif
> -
> -/*
> - * We have mapped the sa1101 depending on the value of SA1101_BASE.
> - * It then appears from 0xf4000000.
> - */
> -
> -#define SA1101_p2v( x ) ((x) - SA1101_BASE + 0xf4000000)
> -#define SA1101_v2p( x ) ((x) - 0xf4000000 + SA1101_BASE)
> -
> -#ifndef SA1101_p2v
> -#define SA1101_p2v(PhAdd) (PhAdd)
> -#endif
> -
> -#include <mach/bitfield.h>
> -
> -#define C 0
> -#define Assembly 1
> -
> -
> -/*
> - * Memory map
> - */
> -
> -#define __SHMEM_CONTROL0 0x00000000
> -#define __SYSTEM_CONTROL1 0x00000400
> -#define __ARBITER 0x00020000
> -#define __SYSTEM_CONTROL2 0x00040000
> -#define __SYSTEM_CONTROL3 0x00060000
> -#define __PARALLEL_PORT 0x00080000
> -#define __VIDMEM_CONTROL 0x00100000
> -#define __UPDATE_FIFO 0x00120000
> -#define __SHMEM_CONTROL1 0x00140000
> -#define __INTERRUPT_CONTROL 0x00160000
> -#define __USB_CONTROL 0x00180000
> -#define __TRACK_INTERFACE 0x001a0000
> -#define __MOUSE_INTERFACE 0x001b0000
> -#define __KEYPAD_INTERFACE 0x001c0000
> -#define __PCMCIA_INTERFACE 0x001e0000
> -#define __VGA_CONTROL 0x00200000
> -#define __GPIO_INTERFACE 0x00300000
> -
> -/*
> - * Macro that calculates real address for registers in the SA-1101
> - */
> -
> -#define _SA1101( x ) ((x) + SA1101_BASE)
> -
> -/*
> - * Interface and shared memory controller registers
> - *
> - * Registers
> - * SKCR SA-1101 control register (read/write)
> - * SMCR Shared Memory Controller Register
> - * SNPR Snoop Register
> - */
> -
> -#define _SKCR _SA1101( 0x00000000 ) /* SA-1101 Control Reg. */
> -#define _SMCR _SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */
> -#define _SNPR _SA1101( 0x00140400 ) /* Snoop Reg. */
> -
> -#if LANGUAGE == C
> -#define SKCR (*((volatile Word *) SA1101_p2v (_SKCR)))
> -#define SMCR (*((volatile Word *) SA1101_p2v (_SMCR)))
> -#define SNPR (*((volatile Word *) SA1101_p2v (_SNPR)))
> -
> -#define SKCR_PLLEn 0x0001 /* Enable On-Chip PLL */
> -#define SKCR_BCLKEn 0x0002 /* Enables BCLK */
> -#define SKCR_Sleep 0x0004 /* Sleep Mode */
> -#define SKCR_IRefEn 0x0008 /* DAC Iref input enable */
> -#define SKCR_VCOON 0x0010 /* VCO bias */
> -#define SKCR_ScanTestEn 0x0020 /* Enables scan test */
> -#define SKCR_ClockTestEn 0x0040 /* Enables clock test */
> -
> -#define SMCR_DCAC Fld(2,0) /* Number of column address bits */
> -#define SMCR_DRAC Fld(2,2) /* Number of row address bits */
> -#define SMCR_ArbiterBias 0x0008 /* favor video or USB */
> -#define SMCR_TopVidMem Fld(4,5) /* Top 4 bits of vidmem addr. */
> -
> -#define SMCR_ColAdrBits( x ) /* col. addr bits 8..11 */ \
> - (( (x) - 8 ) << FShft (SMCR_DCAC))
> -#define SMCR_RowAdrBits( x ) /* row addr bits 9..12 */\
> - (( (x) - 9 ) << FShft (SMCR_DRAC))
> -
> -#define SNPR_VFBstart Fld(12,0) /* Video frame buffer addr */
> -#define SNPR_VFBsize Fld(11,12) /* Video frame buffer size */
> -#define SNPR_WholeBank (1 << 23) /* Whole bank bit */
> -#define SNPR_BankSelect Fld(2,27) /* Bank select */
> -#define SNPR_SnoopEn (1 << 31) /* Enable snoop operation */
> -
> -#define SNPR_Set_VFBsize( x ) /* set frame buffer size (in kb) */ \
> - ( (x) << FShft (SNPR_VFBsize))
> -#define SNPR_Select_Bank(x) /* select bank 0 or 1 */ \
> - (( (x) + 1 ) << FShft (SNPR_BankSelect ))
> -
> -#endif /* LANGUAGE == C */
> -
> -/*
> - * Video Memory Controller
> - *
> - * Registers
> - * VMCCR Configuration register
> - * VMCAR VMC address register
> - * VMCDR VMC data register
> - *
> - */
> -
> -#define _VMCCR _SA1101( 0x00100000 ) /* Configuration register */
> -#define _VMCAR _SA1101( 0x00101000 ) /* VMC address register */
> -#define _VMCDR _SA1101( 0x00101400 ) /* VMC data register */
> -
> -#if LANGUAGE == C
> -#define VMCCR (*((volatile Word *) SA1101_p2v (_VMCCR)))
> -#define VMCAR (*((volatile Word *) SA1101_p2v (_VMCAR)))
> -#define VMCDR (*((volatile Word *) SA1101_p2v (_VMCDR)))
> -
> -#define VMCCR_RefreshEn 0x0000 /* Enable memory refresh */
> -#define VMCCR_Config 0x0001 /* DRAM size */
> -#define VMCCR_RefPeriod Fld(2,3) /* Refresh period */
> -#define VMCCR_StaleDataWait Fld(4,5) /* Stale FIFO data timeout
> counter */
> -#define VMCCR_SleepState (1<<9) /* State of interface pins in
> sleep*/
> -#define VMCCR_RefTest (1<<10) /* refresh test */
> -#define VMCCR_RefLow Fld(6,11) /* refresh low counter */
> -#define VMCCR_RefHigh Fld(7,17) /* refresh high counter */
> -#define VMCCR_SDTCTest Fld(7,24) /* stale data timeout counter
> */
> -#define VMCCR_ForceSelfRef (1<<31) /* Force self refresh */
> -
> -#endif LANGUAGE == C
> -
> -
> -/* Update FIFO
> - *
> - * Registers
> - * UFCR Update FIFO Control Register
> - * UFSR Update FIFO Status Register
> - * UFLVLR update FIFO level register
> - * UFDR update FIFO data register
> - */
> -
> -#define _UFCR _SA1101(0x00120000) /* Update FIFO Control Reg. */
> -#define _UFSR _SA1101(0x00120400) /* Update FIFO Status Reg. */
> -#define _UFLVLR _SA1101(0x00120800) /* Update FIFO level reg. */
> -#define _UFDR _SA1101(0x00120c00) /* Update FIFO data reg. */
> -
> -#if LANGUAGE == C
> -
> -#define UFCR (*((volatile Word *) SA1101_p2v (_UFCR)))
> -#define UFSR (*((volatile Word *) SA1101_p2v (_UFSR)))
> -#define UFLVLR (*((volatile Word *) SA1101_p2v (_UFLVLR)))
> -#define UFDR (*((volatile Word *) SA1101_p2v (_UFDR)))
> -
> -
> -#define UFCR_FifoThreshhold Fld(7,0) /* Level for FifoGTn flag */
> -
> -#define UFSR_FifoGTnFlag 0x01 /* FifoGTn flag */#define
> UFSR_FifoEmpty 0x80 /* FIFO is empty */
> -
> -#endif /* LANGUAGE == C */
> -
> -/* System Controller
> - *
> - * Registers
> - * SKPCR Power Control Register
> - * SKCDR Clock Divider Register
> - * DACDR1 DAC1 Data register
> - * DACDR2 DAC2 Data register
> - */
> -
> -#define _SKPCR _SA1101(0x00000400)
> -#define _SKCDR _SA1101(0x00040000)
> -#define _DACDR1 _SA1101(0x00060000)
> -#define _DACDR2 _SA1101(0x00060400)
> -
> -#if LANGUAGE == C
> -#define SKPCR (*((volatile Word *) SA1101_p2v (_SKPCR)))
> -#define SKCDR (*((volatile Word *) SA1101_p2v (_SKCDR)))
> -#define DACDR1 (*((volatile Word *) SA1101_p2v (_DACDR1)))
> -#define DACDR2 (*((volatile Word *) SA1101_p2v (_DACDR2)))
> -
> -#define SKPCR_UCLKEn 0x01 /* USB Enable */
> -#define SKPCR_PCLKEn 0x02 /* PS/2 Enable */
> -#define SKPCR_ICLKEn 0x04 /* Interrupt Controller Enable */
> -#define SKPCR_VCLKEn 0x08 /* Video Controller Enable */
> -#define SKPCR_PICLKEn 0x10 /* parallel port Enable */
> -#define SKPCR_DCLKEn 0x20 /* DACs Enable */
> -#define SKPCR_nKPADEn 0x40 /* Multiplexer */
> -
> -#define SKCDR_PLLMul Fld(7,0) /* PLL Multiplier */
> -#define SKCDR_VCLKEn Fld(2,7) /* Video controller clock divider
> */
> -#define SKDCR_BCLKEn (1<<9) /* BCLK Divider */
> -#define SKDCR_UTESTCLKEn (1<<10) /* Route USB clock during test mode
> */
> -#define SKDCR_DivRValue Fld(6,11) /* Input clock divider for PLL
> */
> -#define SKDCR_DivNValue Fld(5,17) /* Output clock divider for
> PLL */
> -#define SKDCR_PLLRSH Fld(3,22) /* PLL bandwidth control */
> -#define SKDCR_ChargePump (1<<25) /* Charge pump control */
> -#define SKDCR_ClkTestMode (1<<26) /* Clock output test mode */
> -#define SKDCR_ClkTestEn (1<<27) /* Test clock generator */
> -#define SKDCR_ClkJitterCntl Fld(3,28) /* video clock jitter
> compensation */
> -
> -#define DACDR_DACCount Fld(8,0) /* Count value */
> -#define DACDR1_DACCount DACDR_DACCount
> -#define DACDR2_DACCount DACDR_DACCount
> -
> -#endif /* LANGUAGE == C */
> -
> -/*
> - * Parallel Port Interface
> - *
> - * Registers
> - * IEEE_Config IEEE mode selection and programmable attributes
> - * IEEE_Control Controls the states of IEEE port control outputs
> - * IEEE_Data Forward transfer data register
> - * IEEE_Addr Forward transfer address register
> - * IEEE_Status Port IO signal status register
> - * IEEE_IntStatus Port interrupts status register
> - * IEEE_FifoLevels Rx and Tx FIFO interrupt generation levels
> - * IEEE_InitTime Forward timeout counter initial value
> - * IEEE_TimerStatus Forward timeout counter current value
> - * IEEE_FifoReset Reset forward transfer FIFO
> - * IEEE_ReloadValue Counter reload value
> - * IEEE_TestControl Control testmode
> - * IEEE_TestDataIn Test data register
> - * IEEE_TestDataInEn Enable test data
> - * IEEE_TestCtrlIn Test control signals
> - * IEEE_TestCtrlInEn Enable test control signals
> - * IEEE_TestDataStat Current data bus value
> - *
> - */
> -
> -/*
> - * The control registers are defined as offsets from a base address
> - */
> -
> -#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT )
> -
> -#define _IEEE_Config _IEEE( 0x0000 )
> -#define _IEEE_Control _IEEE( 0x0400 )
> -#define _IEEE_Data _IEEE( 0x4000 )
> -#define _IEEE_Addr _IEEE( 0x0800 )
> -#define _IEEE_Status _IEEE( 0x0c00 )
> -#define _IEEE_IntStatus _IEEE( 0x1000 )
> -#define _IEEE_FifoLevels _IEEE( 0x1400 )
> -#define _IEEE_InitTime _IEEE( 0x1800 )
> -#define _IEEE_TimerStatus _IEEE( 0x1c00 )
> -#define _IEEE_FifoReset _IEEE( 0x2000 )
> -#define _IEEE_ReloadValue _IEEE( 0x3c00 )
> -#define _IEEE_TestControl _IEEE( 0x2400 )
> -#define _IEEE_TestDataIn _IEEE( 0x2800 )
> -#define _IEEE_TestDataInEn _IEEE( 0x2c00 )
> -#define _IEEE_TestCtrlIn _IEEE( 0x3000 )
> -#define _IEEE_TestCtrlInEn _IEEE( 0x3400 )
> -#define _IEEE_TestDataStat _IEEE( 0x3800 )
> -
> -
> -#if LANGUAGE == C
> -#define IEEE_Config (*((volatile Word *) SA1101_p2v (_IEEE_Config)))
> -#define IEEE_Control (*((volatile Word *) SA1101_p2v
> (_IEEE_Control)))
> -#define IEEE_Data (*((volatile Word *) SA1101_p2v (_IEEE_Data)))
> -#define IEEE_Addr (*((volatile Word *) SA1101_p2v (_IEEE_Addr)))
> -#define IEEE_Status (*((volatile Word *) SA1101_p2v (_IEEE_Status)))
> -#define IEEE_IntStatus (*((volatile Word *) SA1101_p2v
> (_IEEE_IntStatus)))
> -#define IEEE_FifoLevels (*((volatile Word *) SA1101_p2v
> (_IEEE_FifoLevels)))
> -#define IEEE_InitTime (*((volatile Word *) SA1101_p2v
> (_IEEE_InitTime)))
> -#define IEEE_TimerStatus (*((volatile Word *) SA1101_p2v
> (_IEEE_TimerStatus)))
> -#define IEEE_FifoReset (*((volatile Word *) SA1101_p2v
> (_IEEE_FifoReset)))
> -#define IEEE_ReloadValue (*((volatile Word *) SA1101_p2v
> (_IEEE_ReloadValue)))
> -#define IEEE_TestControl (*((volatile Word *) SA1101_p2v
> (_IEEE_TestControl)))
> -#define IEEE_TestDataIn (*((volatile Word *) SA1101_p2v
> (_IEEE_TestDataIn)))
> -#define IEEE_TestDataInEn (*((volatile Word *) SA1101_p2v
> (_IEEE_TestDataInEn)))
> -#define IEEE_TestCtrlIn (*((volatile Word *) SA1101_p2v
> (_IEEE_TestCtrlIn)))
> -#define IEEE_TestCtrlInEn (*((volatile Word *) SA1101_p2v
> (_IEEE_TestCtrlInEn)))
> -#define IEEE_TestDataStat (*((volatile Word *) SA1101_p2v
> (_IEEE_TestDataStat)))
> -
> -
> -#define IEEE_Config_M Fld(3,0) /* Mode select */
> -#define IEEE_Config_D 0x04 /* FIFO access enable */
> -#define IEEE_Config_B 0x08 /* 9-bit word enable */
> -#define IEEE_Config_T 0x10 /* Data transfer enable */
> -#define IEEE_Config_A 0x20 /* Data transfer direction */
> -#define IEEE_Config_E 0x40 /* Timer enable */
> -#define IEEE_Control_A 0x08 /* AutoFd output */
> -#define IEEE_Control_E 0x04 /* Selectin output */
> -#define IEEE_Control_T 0x02 /* Strobe output */
> -#define IEEE_Control_I 0x01 /* Port init output */
> -#define IEEE_Data_C (1<<31) /* Byte count */
> -#define IEEE_Data_Db Fld(9,16) /* Data byte 2 */
> -#define IEEE_Data_Da Fld(9,0) /* Data byte 1 */
> -#define IEEE_Addr_A Fld(8,0) /* forward address transfer byte */
> -#define IEEE_Status_A 0x0100 /* nAutoFd port output status */
> -#define IEEE_Status_E 0x0080 /* nSelectIn port output status */
> -#define IEEE_Status_T 0x0040 /* nStrobe port output status */
> -#define IEEE_Status_I 0x0020 /* nInit port output status */
> -#define IEEE_Status_B 0x0010 /* Busy port inout status */
> -#define IEEE_Status_S 0x0008 /* Select port input status */
> -#define IEEE_Status_K 0x0004 /* nAck port input status */
> -#define IEEE_Status_F 0x0002 /* nFault port input status */
> -#define IEEE_Status_R 0x0001 /* pError port input status */
> -
> -#define IEEE_IntStatus_IntReqDat 0x0100
> -#define IEEE_IntStatus_IntReqEmp 0x0080
> -#define IEEE_IntStatus_IntReqInt 0x0040
> -#define IEEE_IntStatus_IntReqRav 0x0020
> -#define IEEE_IntStatus_IntReqTim 0x0010
> -#define IEEE_IntStatus_RevAddrComp 0x0008
> -#define IEEE_IntStatus_RevDataComp 0x0004
> -#define IEEE_IntStatus_FwdAddrComp 0x0002
> -#define IEEE_IntStatus_FwdDataComp 0x0001
> -#define IEEE_FifoLevels_RevFifoLevel 2
> -#define IEEE_FifoLevels_FwdFifoLevel 1
> -#define IEEE_InitTime_TimValInit Fld(22,0)
> -#define IEEE_TimerStatus_TimValStat Fld(22,0)
> -#define IEEE_ReloadValue_Reload Fld(4,0)
> -
> -#define IEEE_TestControl_RegClk 0x04
> -#define IEEE_TestControl_ClockSelect Fld(2,1)
> -#define IEEE_TestControl_TimerTestModeEn 0x01
> -#define IEEE_TestCtrlIn_PError 0x10
> -#define IEEE_TestCtrlIn_nFault 0x08
> -#define IEEE_TestCtrlIn_nAck 0x04
> -#define IEEE_TestCtrlIn_PSel 0x02
> -#define IEEE_TestCtrlIn_Busy 0x01
> -
> -#endif /* LANGUAGE == C */
> -
> -/*
> - * VGA Controller
> - *
> - * Registers
> - * VideoControl Video Control Register
> - * VgaTiming0 VGA Timing Register 0
> - * VgaTiming1 VGA Timing Register 1
> - * VgaTiming2 VGA Timing Register 2
> - * VgaTiming3 VGA Timing Register 3
> - * VgaBorder VGA Border Color Register
> - * VgaDBAR VGADMA Base Address Register
> - * VgaDCAR VGADMA Channel Current Address Register
> - * VgaStatus VGA Status Register
> - * VgaInterruptMask VGA Interrupt Mask Register
> - * VgaPalette VGA Palette Registers
> - * DacControl DAC Control Register
> - * VgaTest VGA Controller Test Register
> - */
> -
> -#define _VGA( x ) _SA1101( ( x ) + __VGA_CONTROL )
> -
> -#define _VideoControl _VGA( 0x0000 )
> -#define _VgaTiming0 _VGA( 0x0400 )
> -#define _VgaTiming1 _VGA( 0x0800 )
> -#define _VgaTiming2 _VGA( 0x0c00 )
> -#define _VgaTiming3 _VGA( 0x1000 )
> -#define _VgaBorder _VGA( 0x1400 )
> -#define _VgaDBAR _VGA( 0x1800 )
> -#define _VgaDCAR _VGA( 0x1c00 )
> -#define _VgaStatus _VGA( 0x2000 )
> -#define _VgaInterruptMask _VGA( 0x2400 )
> -#define _VgaPalette _VGA( 0x40000 )
> -#define _DacControl _VGA( 0x3000 )
> -#define _VgaTest _VGA( 0x2c00 )
> -
> -#if (LANGUAGE == C)
> -#define VideoControl (*((volatile Word *) SA1101_p2v (_VideoControl)))
> -#define VgaTiming0 (*((volatile Word *) SA1101_p2v (_VgaTiming0)))
> -#define VgaTiming1 (*((volatile Word *) SA1101_p2v (_VgaTiming1)))
> -#define VgaTiming2 (*((volatile Word *) SA1101_p2v (_VgaTiming2)))
> -#define VgaTiming3 (*((volatile Word *) SA1101_p2v (_VgaTiming3)))
> -#define VgaBorder (*((volatile Word *) SA1101_p2v (_VgaBorder)))
> -#define VgaDBAR (*((volatile Word *) SA1101_p2v (_VgaDBAR)))
> -#define VgaDCAR (*((volatile Word *) SA1101_p2v (_VgaDCAR)))
> -#define VgaStatus (*((volatile Word *) SA1101_p2v (_VgaStatus)))
> -#define VgaInterruptMask (*((volatile Word *) SA1101_p2v
> (_VgaInterruptMask)))
> -#define VgaPalette (*((volatile Word *) SA1101_p2v (_VgaPalette)))
> -#define DacControl (*((volatile Word *) SA1101_p2v (_DacControl)))
> -#define VgaTest (*((volatile Word *) SA1101_p2v (_VgaTest)))
> -
> -#define VideoControl_VgaEn 0x00000000
> -#define VideoControl_BGR 0x00000001
> -#define VideoControl_VCompVal Fld(2,2)
> -#define VideoControl_VgaReq Fld(4,4)
> -#define VideoControl_VBurstL Fld(4,8)
> -#define VideoControl_VMode (1<<12)
> -#define VideoControl_PalRead (1<<13)
> -
> -#define VgaTiming0_PPL Fld(6,2)
> -#define VgaTiming0_HSW Fld(8,8)
> -#define VgaTiming0_HFP Fld(8,16)
> -#define VgaTiming0_HBP Fld(8,24)
> -
> -#define VgaTiming1_LPS Fld(10,0)
> -#define VgaTiming1_VSW Fld(6,10)
> -#define VgaTiming1_VFP Fld(8,16)
> -#define VgaTiming1_VBP Fld(8,24)
> -
> -#define VgaTiming2_IVS 0x01
> -#define VgaTiming2_IHS 0x02
> -#define VgaTiming2_CVS 0x04
> -#define VgaTiming2_CHS 0x08
> -
> -#define VgaTiming3_HBS Fld(8,0)
> -#define VgaTiming3_HBE Fld(8,8)
> -#define VgaTiming3_VBS Fld(8,16)
> -#define VgaTiming3_VBE Fld(8,24)
> -
> -#define VgaBorder_BCOL Fld(24,0)
> -
> -#define VgaStatus_VFUF 0x01
> -#define VgaStatus_VNext 0x02
> -#define VgaStatus_VComp 0x04
> -
> -#define VgaInterruptMask_VFUFMask 0x00
> -#define VgaInterruptMask_VNextMask 0x01
> -#define VgaInterruptMask_VCompMask 0x02
> -
> -#define VgaPalette_R Fld(8,0)
> -#define VgaPalette_G Fld(8,8)
> -#define VgaPalette_B Fld(8,16)
> -
> -#define DacControl_DACON 0x0001
> -#define DacControl_COMPON 0x0002
> -#define DacControl_PEDON 0x0004
> -#define DacControl_RTrim Fld(5,4)
> -#define DacControl_GTrim Fld(5,9)
> -#define DacControl_BTrim Fld(5,14)
> -
> -#define VgaTest_TDAC 0x00
> -#define VgaTest_Datatest Fld(4,1)
> -#define VgaTest_DACTESTDAC 0x10
> -#define VgaTest_DACTESTOUT Fld(3,5)
> -
> -#endif /* LANGUAGE == C */
> -
> -/*
> - * USB Host Interface Controller
> - *
> - * Registers
> - * Revision
> - * Control
> - * CommandStatus
> - * InterruptStatus
> - * InterruptEnable
> - * HCCA
> - * PeriodCurrentED
> - * ControlHeadED
> - * BulkHeadED
> - * BulkCurrentED
> - * DoneHead
> - * FmInterval
> - * FmRemaining
> - * FmNumber
> - * PeriodicStart
> - * LSThreshold
> - * RhDescriptorA
> - * RhDescriptorB
> - * RhStatus
> - * RhPortStatus
> - * USBStatus
> - * USBReset
> - * USTAR
> - * USWER
> - * USRFR
> - * USNFR
> - * USTCSR
> - * USSR
> - *
> - */
> -
> -#define _USB( x ) _SA1101( ( x ) + __USB_CONTROL )
> -
> -
> -#define _Revision _USB( 0x0000 )
> -#define _Control _USB( 0x0888 )
> -#define _CommandStatus _USB( 0x0c00 )
> -#define _InterruptStatus _USB( 0x1000 )
> -#define _InterruptEnable _USB( 0x1400 )
> -#define _HCCA _USB( 0x1800 )
> -#define _PeriodCurrentED _USB( 0x1c00 )
> -#define _ControlHeadED _USB( 0x2000 )
> -#define _BulkHeadED _USB( 0x2800 )
> -#define _BulkCurrentED _USB( 0x2c00 )
> -#define _DoneHead _USB( 0x3000 )
> -#define _FmInterval _USB( 0x3400 )
> -#define _FmRemaining _USB( 0x3800 )
> -#define _FmNumber _USB( 0x3c00 )
> -#define _PeriodicStart _USB( 0x4000 )
> -#define _LSThreshold _USB( 0x4400 )
> -#define _RhDescriptorA _USB( 0x4800 )
> -#define _RhDescriptorB _USB( 0x4c00 )
> -#define _RhStatus _USB( 0x5000 )
> -#define _RhPortStatus _USB( 0x5400 )
> -#define _USBStatus _USB( 0x11800 )
> -#define _USBReset _USB( 0x11c00 )
> -
> -#define _USTAR _USB( 0x10400 )
> -#define _USWER _USB( 0x10800 )
> -#define _USRFR _USB( 0x10c00 )
> -#define _USNFR _USB( 0x11000 )
> -#define _USTCSR _USB( 0x11400 )
> -#define _USSR _USB( 0x11800 )
> -
> -
> -#if (LANGUAGE == C)
> -
> -#define Revision (*((volatile Word *) SA1101_p2v (_Revision)))
> -#define Control (*((volatile Word *) SA1101_p2v (_Control)))
> -#define CommandStatus (*((volatile Word *) SA1101_p2v (_CommandStatus)))
> -#define InterruptStatus (*((volatile Word *) SA1101_p2v
> (_InterruptStatus)))
> -#define InterruptEnable (*((volatile Word *) SA1101_p2v
> (_InterruptEnable)))
> -#define HCCA (*((volatile Word *) SA1101_p2v (_HCCA)))
> -#define PeriodCurrentED (*((volatile Word *) SA1101_p2v
> (_PeriodCurrentED)))
> -#define ControlHeadED (*((volatile Word *) SA1101_p2v (_ControlHeadED)))
> -#define BulkHeadED (*((volatile Word *) SA1101_p2v (_BulkHeadED)))
> -#define BulkCurrentED (*((volatile Word *) SA1101_p2v (_BulkCurrentED)))
> -#define DoneHead (*((volatile Word *) SA1101_p2v (_DoneHead)))
> -#define FmInterval (*((volatile Word *) SA1101_p2v (_FmInterval)))
> -#define FmRemaining (*((volatile Word *) SA1101_p2v (_FmRemaining)))
> -#define FmNumber (*((volatile Word *) SA1101_p2v (_FmNumber)))
> -#define PeriodicStart (*((volatile Word *) SA1101_p2v (_PeriodicStart)))
> -#define LSThreshold (*((volatile Word *) SA1101_p2v (_LSThreshold)))
> -#define RhDescriptorA (*((volatile Word *) SA1101_p2v (_RhDescriptorA)))
> -#define RhDescriptorB (*((volatile Word *) SA1101_p2v (_RhDescriptorB)))
> -#define RhStatus (*((volatile Word *) SA1101_p2v (_RhStatus)))
> -#define RhPortStatus (*((volatile Word *) SA1101_p2v (_RhPortStatus)))
> -#define USBStatus (*((volatile Word *) SA1101_p2v (_USBStatus)))
> -#define USBReset (*((volatile Word *) SA1101_p2v (_USBReset)))
> -#define USTAR (*((volatile Word *) SA1101_p2v (_USTAR)))
> -#define USWER (*((volatile Word *) SA1101_p2v (_USWER)))
> -#define USRFR (*((volatile Word *) SA1101_p2v (_USRFR)))
> -#define USNFR (*((volatile Word *) SA1101_p2v (_USNFR)))
> -#define USTCSR (*((volatile Word *) SA1101_p2v (_USTCSR)))
> -#define USSR (*((volatile Word *) SA1101_p2v (_USSR)))
> -
> -
> -#define USBStatus_IrqHciRmtWkp (1<<7)
> -#define USBStatus_IrqHciBuffAcc (1<<8)
> -#define USBStatus_nIrqHciM (1<<9)
> -#define USBStatus_nHciMFClr (1<<10)
> -
> -#define USBReset_ForceIfReset 0x01
> -#define USBReset_ForceHcReset 0x02
> -#define USBReset_ClkGenReset 0x04
> -
> -#define USTCR_RdBstCntrl Fld(3,0)
> -#define USTCR_ByteEnable Fld(4,3)
> -#define USTCR_WriteEn (1<<7)
> -#define USTCR_FifoCir (1<<8)
> -#define USTCR_TestXferSel (1<<9)
> -#define USTCR_FifoCirAtEnd (1<<10)
> -#define USTCR_nSimScaleDownClk (1<<11)
> -
> -#define USSR_nAppMDEmpty 0x01
> -#define USSR_nAppMDFirst 0x02
> -#define USSR_nAppMDLast 0x04
> -#define USSR_nAppMDFull 0x08
> -#define USSR_nAppMAFull 0x10
> -#define USSR_XferReq 0x20
> -#define USSR_XferEnd 0x40
> -
> -#endif /* LANGUAGE == C */
> -
> -
> -/*
> - * Interrupt Controller
> - *
> - * Registers
> - * INTTEST0 Test register 0
> - * INTTEST1 Test register 1
> - * INTENABLE0 Interrupt Enable register 0
> - * INTENABLE1 Interrupt Enable register 1
> - * INTPOL0 Interrupt Polarity selection 0
> - * INTPOL1 Interrupt Polarity selection 1
> - * INTTSTSEL Interrupt source selection
> - * INTSTATCLR0 Interrupt Status 0
> - * INTSTATCLR1 Interrupt Status 1
> - * INTSET0 Interrupt Set 0
> - * INTSET1 Interrupt Set 1
> - */
> -
> -#define _INT( x ) _SA1101( ( x ) + __INTERRUPT_CONTROL)
> -
> -#define _INTTEST0 _INT( 0x1000 )
> -#define _INTTEST1 _INT( 0x1400 )
> -#define _INTENABLE0 _INT( 0x2000 )
> -#define _INTENABLE1 _INT( 0x2400 )
> -#define _INTPOL0 _INT( 0x3000 )
> -#define _INTPOL1 _INT( 0x3400 )
> -#define _INTTSTSEL _INT( 0x5000 )
> -#define _INTSTATCLR0 _INT( 0x6000 )
> -#define _INTSTATCLR1 _INT( 0x6400 )
> -#define _INTSET0 _INT( 0x7000 )
> -#define _INTSET1 _INT( 0x7400 )
> -
> -#if ( LANGUAGE == C )
> -#define INTTEST0 (*((volatile Word *) SA1101_p2v (_INTTEST0)))
> -#define INTTEST1 (*((volatile Word *) SA1101_p2v (_INTTEST1)))
> -#define INTENABLE0 (*((volatile Word *) SA1101_p2v (_INTENABLE0)))
> -#define INTENABLE1 (*((volatile Word *) SA1101_p2v (_INTENABLE1)))
> -#define INTPOL0 (*((volatile Word *) SA1101_p2v (_INTPOL0)))
> -#define INTPOL1 (*((volatile Word *) SA1101_p2v (_INTPOL1)))
> -#define INTTSTSEL (*((volatile Word *) SA1101_p2v (_INTTSTSEL)))
> -#define INTSTATCLR0 (*((volatile Word *) SA1101_p2v (_INTSTATCLR0)))
> -#define INTSTATCLR1 (*((volatile Word *) SA1101_p2v (_INTSTATCLR1)))
> -#define INTSET0 (*((volatile Word *) SA1101_p2v (_INTSET0)))
> -#define INTSET1 (*((volatile Word *) SA1101_p2v (_INTSET1)))
> -
> -#endif /* LANGUAGE == C */
> -
> -/*
> - * PS/2 Trackpad and Mouse Interfaces
> - *
> - * Registers (prefix kbd applies to trackpad interface, mse to mouse)
> - * KBDCR Control Register
> - * KBDSTAT Status Register
> - * KBDDATA Transmit/Receive Data register
> - * KBDCLKDIV Clock Division Register
> - * KBDPRECNT Clock Precount Register
> - * KBDTEST1 Test register 1
> - * KBDTEST2 Test register 2
> - * KBDTEST3 Test register 3
> - * KBDTEST4 Test register 4
> - * MSECR
> - * MSESTAT
> - * MSEDATA
> - * MSECLKDIV
> - * MSEPRECNT
> - * MSETEST1
> - * MSETEST2
> - * MSETEST3
> - * MSETEST4
> - *
> - */
> -
> -#define _KBD( x ) _SA1101( ( x ) + __TRACK_INTERFACE )
> -#define _MSE( x ) _SA1101( ( x ) + __MOUSE_INTERFACE )
> -
> -#define _KBDCR _KBD( 0x0000 )
> -#define _KBDSTAT _KBD( 0x0400 )
> -#define _KBDDATA _KBD( 0x0800 )
> -#define _KBDCLKDIV _KBD( 0x0c00 )
> -#define _KBDPRECNT _KBD( 0x1000 )
> -#define _KBDTEST1 _KBD( 0x2000 )
> -#define _KBDTEST2 _KBD( 0x2400 )
> -#define _KBDTEST3 _KBD( 0x2800 )
> -#define _KBDTEST4 _KBD( 0x2c00 )
> -#define _MSECR _MSE( 0x0000 )
> -#define _MSESTAT _MSE( 0x0400 )
> -#define _MSEDATA _MSE( 0x0800 )
> -#define _MSECLKDIV _MSE( 0x0c00 )
> -#define _MSEPRECNT _MSE( 0x1000 )
> -#define _MSETEST1 _MSE( 0x2000 )
> -#define _MSETEST2 _MSE( 0x2400 )
> -#define _MSETEST3 _MSE( 0x2800 )
> -#define _MSETEST4 _MSE( 0x2c00 )
> -
> -#if ( LANGUAGE == C )
> -
> -#define KBDCR (*((volatile Word *) SA1101_p2v (_KBDCR)))
> -#define KBDSTAT (*((volatile Word *) SA1101_p2v (_KBDSTAT)))
> -#define KBDDATA (*((volatile Word *) SA1101_p2v (_KBDDATA)))
> -#define KBDCLKDIV (*((volatile Word *) SA1101_p2v (_KBDCLKDIV)))
> -#define KBDPRECNT (*((volatile Word *) SA1101_p2v (_KBDPRECNT)))
> -#define KBDTEST1 (*((volatile Word *) SA1101_p2v (_KBDTEST1)))
> -#define KBDTEST2 (*((volatile Word *) SA1101_p2v (_KBDTEST2)))
> -#define KBDTEST3 (*((volatile Word *) SA1101_p2v (_KBDTEST3)))
> -#define KBDTEST4 (*((volatile Word *) SA1101_p2v (_KBDTEST4)))
> -#define MSECR (*((volatile Word *) SA1101_p2v (_MSECR)))
> -#define MSESTAT (*((volatile Word *) SA1101_p2v (_MSESTAT)))
> -#define MSEDATA (*((volatile Word *) SA1101_p2v (_MSEDATA)))
> -#define MSECLKDIV (*((volatile Word *) SA1101_p2v (_MSECLKDIV)))
> -#define MSEPRECNT (*((volatile Word *) SA1101_p2v (_MSEPRECNT)))
> -#define MSETEST1 (*((volatile Word *) SA1101_p2v (_MSETEST1)))
> -#define MSETEST2 (*((volatile Word *) SA1101_p2v (_MSETEST2)))
> -#define MSETEST3 (*((volatile Word *) SA1101_p2v (_MSETEST3)))
> -#define MSETEST4 (*((volatile Word *) SA1101_p2v (_MSETEST4)))
> -
> -
> -#define KBDCR_ENA 0x08
> -#define KBDCR_FKD 0x02
> -#define KBDCR_FKC 0x01
> -
> -#define KBDSTAT_TXE 0x80
> -#define KBDSTAT_TXB 0x40
> -#define KBDSTAT_RXF 0x20
> -#define KBDSTAT_RXB 0x10
> -#define KBDSTAT_ENA 0x08
> -#define KBDSTAT_RXP 0x04
> -#define KBDSTAT_KBD 0x02
> -#define KBDSTAT_KBC 0x01
> -
> -#define KBDCLKDIV_DivVal Fld(4,0)
> -
> -#define MSECR_ENA 0x08
> -#define MSECR_FKD 0x02
> -#define MSECR_FKC 0x01
> -
> -#define MSESTAT_TXE 0x80
> -#define MSESTAT_TXB 0x40
> -#define MSESTAT_RXF 0x20
> -#define MSESTAT_RXB 0x10
> -#define MSESTAT_ENA 0x08
> -#define MSESTAT_RXP 0x04
> -#define MSESTAT_MSD 0x02
> -#define MSESTAT_MSC 0x01
> -
> -#define MSECLKDIV_DivVal Fld(4,0)
> -
> -#define KBDTEST1_CD 0x80
> -#define KBDTEST1_RC1 0x40
> -#define KBDTEST1_MC 0x20
> -#define KBDTEST1_C Fld(2,3)
> -#define KBDTEST1_T2 0x40
> -#define KBDTEST1_T1 0x20
> -#define KBDTEST1_T0 0x10
> -#define KBDTEST2_TICBnRES 0x08
> -#define KBDTEST2_RKC 0x04
> -#define KBDTEST2_RKD 0x02
> -#define KBDTEST2_SEL 0x01
> -#define KBDTEST3_ms_16 0x80
> -#define KBDTEST3_us_64 0x40
> -#define KBDTEST3_us_16 0x20
> -#define KBDTEST3_DIV8 0x10
> -#define KBDTEST3_DIn 0x08
> -#define KBDTEST3_CIn 0x04
> -#define KBDTEST3_KD 0x02
> -#define KBDTEST3_KC 0x01
> -#define KBDTEST4_BC12 0x80
> -#define KBDTEST4_BC11 0x40
> -#define KBDTEST4_TRES 0x20
> -#define KBDTEST4_CLKOE 0x10
> -#define KBDTEST4_CRES 0x08
> -#define KBDTEST4_RXB 0x04
> -#define KBDTEST4_TXB 0x02
> -#define KBDTEST4_SRX 0x01
> -
> -#define MSETEST1_CD 0x80
> -#define MSETEST1_RC1 0x40
> -#define MSETEST1_MC 0x20
> -#define MSETEST1_C Fld(2,3)
> -#define MSETEST1_T2 0x40
> -#define MSETEST1_T1 0x20
> -#define MSETEST1_T0 0x10
> -#define MSETEST2_TICBnRES 0x08
> -#define MSETEST2_RKC 0x04
> -#define MSETEST2_RKD 0x02
> -#define MSETEST2_SEL 0x01
> -#define MSETEST3_ms_16 0x80
> -#define MSETEST3_us_64 0x40
> -#define MSETEST3_us_16 0x20
> -#define MSETEST3_DIV8 0x10
> -#define MSETEST3_DIn 0x08
> -#define MSETEST3_CIn 0x04
> -#define MSETEST3_KD 0x02
> -#define MSETEST3_KC 0x01
> -#define MSETEST4_BC12 0x80
> -#define MSETEST4_BC11 0x40
> -#define MSETEST4_TRES 0x20
> -#define MSETEST4_CLKOE 0x10
> -#define MSETEST4_CRES 0x08
> -#define MSETEST4_RXB 0x04
> -#define MSETEST4_TXB 0x02
> -#define MSETEST4_SRX 0x01
> -
> -#endif /* LANGUAGE == C */
> -
> -
> -/*
> - * General-Purpose I/O Interface
> - *
> - * Registers
> - * PADWR Port A Data Write Register
> - * PBDWR Port B Data Write Register
> - * PADRR Port A Data Read Register
> - * PBDRR Port B Data Read Register
> - * PADDR Port A Data Direction Register
> - * PBDDR Port B Data Direction Register
> - * PASSR Port A Sleep State Register
> - * PBSSR Port B Sleep State Register
> - *
> - */
> -
> -#define _PIO( x ) _SA1101( ( x ) + __GPIO_INTERFACE )
> -
> -#define _PADWR _PIO( 0x0000 )
> -#define _PBDWR _PIO( 0x0400 )
> -#define _PADRR _PIO( 0x0000 )
> -#define _PBDRR _PIO( 0x0400 )
> -#define _PADDR _PIO( 0x0800 )
> -#define _PBDDR _PIO( 0x0c00 )
> -#define _PASSR _PIO( 0x1000 )
> -#define _PBSSR _PIO( 0x1400 )
> -
> -
> -#if ( LANGUAGE == C )
> -
> -
> -#define PADWR (*((volatile Word *) SA1101_p2v (_PADWR)))
> -#define PBDWR (*((volatile Word *) SA1101_p2v (_PBDWR)))
> -#define PADRR (*((volatile Word *) SA1101_p2v (_PADRR)))
> -#define PBDRR (*((volatile Word *) SA1101_p2v (_PBDRR)))
> -#define PADDR (*((volatile Word *) SA1101_p2v (_PADDR)))
> -#define PBDDR (*((volatile Word *) SA1101_p2v (_PBDDR)))
> -#define PASSR (*((volatile Word *) SA1101_p2v (_PASSR)))
> -#define PBSSR (*((volatile Word *) SA1101_p2v (_PBSSR)))
> -
> -#endif
> -
> -
> -
> -/*
> - * Keypad Interface
> - *
> - * Registers
> - * PXDWR
> - * PXDRR
> - * PYDWR
> - * PYDRR
> - *
> - */
> -
> -#define _KEYPAD( x ) _SA1101( ( x ) + __KEYPAD_INTERFACE )
> -
> -#define _PXDWR _KEYPAD( 0x0000 )
> -#define _PXDRR _KEYPAD( 0x0000 )
> -#define _PYDWR _KEYPAD( 0x0400 )
> -#define _PYDRR _KEYPAD( 0x0400 )
> -
> -#if ( LANGUAGE == C )
> -
> -
> -#define PXDWR (*((volatile Word *) SA1101_p2v (_PXDWR)))
> -#define PXDRR (*((volatile Word *) SA1101_p2v (_PXDRR)))
> -#define PYDWR (*((volatile Word *) SA1101_p2v (_PYDWR)))
> -#define PYDRR (*((volatile Word *) SA1101_p2v (_PYDRR)))
> -
> -#endif
> -
> -
> -
> -/*
> - * PCMCIA Interface
> - *
> - * Registers
> - * PCSR Status Register
> - * PCCR Control Register
> - * PCSSR Sleep State Register
> - *
> - */
> -
> -#define _CARD( x ) _SA1101( ( x ) + __PCMCIA_INTERFACE )
> -
> -#define _PCSR _CARD( 0x0000 )
> -#define _PCCR _CARD( 0x0400 )
> -#define _PCSSR _CARD( 0x0800 )
> -
> -#if ( LANGUAGE == C )
> -#define PCSR (*((volatile Word *) SA1101_p2v (_PCSR)))
> -#define PCCR (*((volatile Word *) SA1101_p2v (_PCCR)))
> -#define PCSSR (*((volatile Word *) SA1101_p2v (_PCSSR)))
> -
> -#define PCSR_S0_ready 0x0001
> -#define PCSR_S1_ready 0x0002
> -#define PCSR_S0_detected 0x0004
> -#define PCSR_S1_detected 0x0008
> -#define PCSR_S0_VS1 0x0010
> -#define PCSR_S0_VS2 0x0020
> -#define PCSR_S1_VS1 0x0040
> -#define PCSR_S1_VS2 0x0080
> -#define PCSR_S0_WP 0x0100
> -#define PCSR_S1_WP 0x0200
> -#define PCSR_S0_BVD1_nSTSCHG 0x0400
> -#define PCSR_S0_BVD2_nSPKR 0x0800
> -#define PCSR_S1_BVD1_nSTSCHG 0x1000
> -#define PCSR_S1_BVD2_nSPKR 0x2000
> -
> -#define PCCR_S0_VPP0 0x0001
> -#define PCCR_S0_VPP1 0x0002
> -#define PCCR_S0_VCC0 0x0004
> -#define PCCR_S0_VCC1 0x0008
> -#define PCCR_S1_VPP0 0x0010
> -#define PCCR_S1_VPP1 0x0020
> -#define PCCR_S1_VCC0 0x0040
> -#define PCCR_S1_VCC1 0x0080
> -#define PCCR_S0_reset 0x0100
> -#define PCCR_S1_reset 0x0200
> -#define PCCR_S0_float 0x0400
> -#define PCCR_S1_float 0x0800
> -
> -#define PCSSR_S0_VCC0 0x0001
> -#define PCSSR_S0_VCC1 0x0002
> -#define PCSSR_S0_VPP0 0x0004
> -#define PCSSR_S0_VPP1 0x0008
> -#define PCSSR_S0_control 0x0010
> -#define PCSSR_S1_VCC0 0x0020
> -#define PCSSR_S1_VCC1 0x0040
> -#define PCSSR_S1_VPP0 0x0080
> -#define PCSSR_S1_VPP1 0x0100
> -#define PCSSR_S1_control 0x0200
> -
> -#endif
> -
> -#undef C
> -#undef Assembly
> diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h
> b/arch/arm/mach-sa1100/include/mach/hardware.h
> index 99f5856..ee5d2bb 100644
> --- a/arch/arm/mach-sa1100/include/mach/hardware.h
> +++ b/arch/arm/mach-sa1100/include/mach/hardware.h
> @@ -72,8 +72,4 @@ static inline unsigned long get_clock_tick_rate(void)
>
> #include "SA-1100.h"
>
> -#ifdef CONFIG_SA1101
> -#include "SA-1101.h"
> -#endif
> -
> #endif /* _ASM_ARCH_HARDWARE_H */
> diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
> index 60acf9e..bb24011 100644
> --- a/arch/arm/mach-u300/clock.c
> +++ b/arch/arm/mach-u300/clock.c
> @@ -216,85 +216,6 @@ static u16 syscon_clk_get_rate(void)
> return val;
> }
>
> -#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
> -static void enable_i2s0_vcxo(void)
> -{
> - u16 val;
> - unsigned long iflags;
> -
> - spin_lock_irqsave(&syscon_clkreg_lock, iflags);
> - /* Set I2S0 to use the VCXO 26 MHz clock */
> - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - val |= U300_SYSCON_CCR_TURN_VCXO_ON;
> - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - val |= U300_SYSCON_CCR_I2S0_USE_VCXO;
> - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
> - val |= U300_SYSCON_CEFR_I2S0_CLK_EN;
> - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
> - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
> -}
> -
> -static void enable_i2s1_vcxo(void)
> -{
> - u16 val;
> - unsigned long iflags;
> -
> - spin_lock_irqsave(&syscon_clkreg_lock, iflags);
> - /* Set I2S1 to use the VCXO 26 MHz clock */
> - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - val |= U300_SYSCON_CCR_TURN_VCXO_ON;
> - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - val |= U300_SYSCON_CCR_I2S1_USE_VCXO;
> - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
> - val |= U300_SYSCON_CEFR_I2S1_CLK_EN;
> - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
> - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
> -}
> -
> -static void disable_i2s0_vcxo(void)
> -{
> - u16 val;
> - unsigned long iflags;
> -
> - spin_lock_irqsave(&syscon_clkreg_lock, iflags);
> - /* Disable I2S0 use of the VCXO 26 MHz clock */
> - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO;
> - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - /* Deactivate VCXO if noone else is using VCXO */
> - if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO))
> - val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
> - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
> - val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
> - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
> - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
> -}
> -
> -static void disable_i2s1_vcxo(void)
> -{
> - u16 val;
> - unsigned long iflags;
> -
> - spin_lock_irqsave(&syscon_clkreg_lock, iflags);
> - /* Disable I2S1 use of the VCXO 26 MHz clock */
> - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO;
> - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - /* Deactivate VCXO if noone else is using VCXO */
> - if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO))
> - val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
> - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
> - val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
> - val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
> - writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
> - spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
> -}
> -#endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */
> -
> -
> static void syscon_clk_rate_set_mclk(unsigned long rate)
> {
> u16 val;
> @@ -383,12 +304,6 @@ void clk_disable(struct clk *clk)
> if (likely((u32)clk->parent))
> clk_disable(clk->parent);
> }
> -#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
> - if (unlikely(!strcmp(clk->name, "I2S0")))
> - disable_i2s0_vcxo();
> - if (unlikely(!strcmp(clk->name, "I2S1")))
> - disable_i2s1_vcxo();
> -#endif
> spin_unlock_irqrestore(&clk->lock, iflags);
> }
> EXPORT_SYMBOL(clk_disable);
> @@ -411,12 +326,6 @@ int clk_enable(struct clk *clk)
> /* clocks without enable function are always on */
> if (clk->enable)
> clk->enable(clk);
> -#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
> - if (unlikely(!strcmp(clk->name, "I2S0")))
> - enable_i2s0_vcxo();
> - if (unlikely(!strcmp(clk->name, "I2S1")))
> - enable_i2s1_vcxo();
> -#endif
> }
> }
> spin_unlock_irqrestore(&clk->lock, iflags);
> diff --git a/arch/arm/plat-mxc/include/mach/mx51.h
> b/arch/arm/plat-mxc/include/mach/mx51.h
> index 5aad344..fd5ec07 100644
> --- a/arch/arm/plat-mxc/include/mach/mx51.h
> +++ b/arch/arm/plat-mxc/include/mach/mx51.h
> @@ -149,11 +149,7 @@
> #define MX51_MXC_DMA_CHANNEL_SSI1_RX MXC_DMA_DYNAMIC_CHANNEL
> #define MX51_MXC_DMA_CHANNEL_SSI1_TX MXC_DMA_DYNAMIC_CHANNEL
> #define MX51_MXC_DMA_CHANNEL_SSI2_RX MXC_DMA_DYNAMIC_CHANNEL
> -#ifdef CONFIG_SDMA_IRAM
> -#define MX51_MXC_DMA_CHANNEL_SSI2_TX (MX51_MXC_DMA_CHANNEL_IRAM + 1)
> -#else /*CONFIG_SDMA_IRAM */
> #define MX51_MXC_DMA_CHANNEL_SSI2_TX MXC_DMA_DYNAMIC_CHANNEL
> -#endif /*CONFIG_SDMA_IRAM */
> #define MX51_MXC_DMA_CHANNEL_CSPI1_RX MXC_DMA_DYNAMIC_CHANNEL
> #define MX51_MXC_DMA_CHANNEL_CSPI1_TX MXC_DMA_DYNAMIC_CHANNEL
> #define MX51_MXC_DMA_CHANNEL_CSPI2_RX MXC_DMA_DYNAMIC_CHANNEL
> diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
> index bda8682..2956d3e 100644
> --- a/arch/m32r/kernel/time.c
> +++ b/arch/m32r/kernel/time.c
> @@ -33,13 +33,9 @@
>
> #include <asm/hw_irq.h>
>
> -#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
> +#if defined(CONFIG_RTC_DRV_CMOS)
> /* this needs a better home */
> DEFINE_SPINLOCK(rtc_lock);
> -
> -#ifdef CONFIG_RTC_DRV_CMOS_MODULE
> -EXPORT_SYMBOL(rtc_lock);
> -#endif
> #endif /* pc-style 'CMOS' RTC support */
>
> #ifdef CONFIG_SMP
> diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c
> index afad677..cd0414a 100644
> --- a/drivers/acpi/proc.c
> +++ b/drivers/acpi/proc.c
> @@ -23,7 +23,7 @@
>
> ACPI_MODULE_NAME("sleep")
>
> -#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) ||
> !defined(CONFIG_X86)
> +#if defined(CONFIG_RTC_DRV_CMOS) || !defined(CONFIG_X86)
> /* use /sys/class/rtc/rtcX/wakealarm instead; it's not ACPI-specific */
> #else
> #define HAVE_ACPI_LEGACY_ALARM
>
>
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC] Removal of dead code from arch/arm/*
2010-10-21 0:39 ` N.P.S.
@ 2010-10-21 7:54 ` Russell King - ARM Linux
-1 siblings, 0 replies; 36+ messages in thread
From: Russell King - ARM Linux @ 2010-10-21 7:54 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Oct 21, 2010 at 02:39:55AM +0200, N.P.S. wrote:
> diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
> index 38c261f..fd30b75 100644
> --- a/arch/arm/kernel/time.c
> +++ b/arch/arm/kernel/time.c
> @@ -37,13 +37,9 @@
> */
> struct sys_timer *system_timer;
>
> -#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
> +#if defined(CONFIG_RTC_DRV_CMOS)
> /* this needs a better home */
> DEFINE_SPINLOCK(rtc_lock);
> -
> -#ifdef CONFIG_RTC_DRV_CMOS_MODULE
> -EXPORT_SYMBOL(rtc_lock);
> -#endif
> #endif /* pc-style 'CMOS' RTC support */
>
> /* change this if you have some constant time drift */
This is wrong, and will break the build if rtc-cmos is built as a module.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC] Removal of dead code from arch/arm/*
@ 2010-10-21 7:54 ` Russell King - ARM Linux
0 siblings, 0 replies; 36+ messages in thread
From: Russell King - ARM Linux @ 2010-10-21 7:54 UTC (permalink / raw)
To: N.P.S.; +Cc: Eric Miao, linux-arm-kernel, linux-kernel
On Thu, Oct 21, 2010 at 02:39:55AM +0200, N.P.S. wrote:
> diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
> index 38c261f..fd30b75 100644
> --- a/arch/arm/kernel/time.c
> +++ b/arch/arm/kernel/time.c
> @@ -37,13 +37,9 @@
> */
> struct sys_timer *system_timer;
>
> -#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
> +#if defined(CONFIG_RTC_DRV_CMOS)
> /* this needs a better home */
> DEFINE_SPINLOCK(rtc_lock);
> -
> -#ifdef CONFIG_RTC_DRV_CMOS_MODULE
> -EXPORT_SYMBOL(rtc_lock);
> -#endif
> #endif /* pc-style 'CMOS' RTC support */
>
> /* change this if you have some constant time drift */
This is wrong, and will break the build if rtc-cmos is built as a module.
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC] Removal of dead code from arch/arm/*
2010-10-21 7:54 ` Russell King - ARM Linux
@ 2010-10-21 8:19 ` Zimny Lech
-1 siblings, 0 replies; 36+ messages in thread
From: Zimny Lech @ 2010-10-21 8:19 UTC (permalink / raw)
To: linux-arm-kernel
2010/10/21 Russell King - ARM Linux <linux@arm.linux.org.uk>:
> On Thu, Oct 21, 2010 at 02:39:55AM +0200, N.P.S. wrote:
>> diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
>> index 38c261f..fd30b75 100644
>> --- a/arch/arm/kernel/time.c
>> +++ b/arch/arm/kernel/time.c
>> @@ -37,13 +37,9 @@
>> ? */
>> ?struct sys_timer *system_timer;
>>
>> -#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
>> +#if defined(CONFIG_RTC_DRV_CMOS)
>> ?/* this needs a better home */
>> ?DEFINE_SPINLOCK(rtc_lock);
>> -
>> -#ifdef CONFIG_RTC_DRV_CMOS_MODULE
>> -EXPORT_SYMBOL(rtc_lock);
>> -#endif
>> ?#endif ? ?/* pc-style 'CMOS' RTC support */
>>
>> ?/* change this if you have some constant time drift */
>
> This is wrong, and will break the build if rtc-cmos is built as a module.
>
Indeed, sorry, I checked use of RTC_DRV_CMOS_MODULE and I should check
RTC_DRV_CMOS
I tried to cross compile allyesconfig to test my changes and I hit this
CC drivers/gpio/janz-ttl.o
drivers/gpio/janz-ttl.c: In function ?ttl_set_value?:
drivers/gpio/janz-ttl.c:107: error: implicit declaration of function
?iowrite16be?
--
Slawa!
N.P.S.
Les fleurs du mal unfold
Comme les fleurs du mal
Dark demons of my soul
Un amour fatal
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC] Removal of dead code from arch/arm/*
@ 2010-10-21 8:19 ` Zimny Lech
0 siblings, 0 replies; 36+ messages in thread
From: Zimny Lech @ 2010-10-21 8:19 UTC (permalink / raw)
To: Russell King - ARM Linux; +Cc: Eric Miao, linux-arm-kernel, linux-kernel
2010/10/21 Russell King - ARM Linux <linux@arm.linux.org.uk>:
> On Thu, Oct 21, 2010 at 02:39:55AM +0200, N.P.S. wrote:
>> diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
>> index 38c261f..fd30b75 100644
>> --- a/arch/arm/kernel/time.c
>> +++ b/arch/arm/kernel/time.c
>> @@ -37,13 +37,9 @@
>> */
>> struct sys_timer *system_timer;
>>
>> -#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
>> +#if defined(CONFIG_RTC_DRV_CMOS)
>> /* this needs a better home */
>> DEFINE_SPINLOCK(rtc_lock);
>> -
>> -#ifdef CONFIG_RTC_DRV_CMOS_MODULE
>> -EXPORT_SYMBOL(rtc_lock);
>> -#endif
>> #endif /* pc-style 'CMOS' RTC support */
>>
>> /* change this if you have some constant time drift */
>
> This is wrong, and will break the build if rtc-cmos is built as a module.
>
Indeed, sorry, I checked use of RTC_DRV_CMOS_MODULE and I should check
RTC_DRV_CMOS
I tried to cross compile allyesconfig to test my changes and I hit this
CC drivers/gpio/janz-ttl.o
drivers/gpio/janz-ttl.c: In function ‘ttl_set_value’:
drivers/gpio/janz-ttl.c:107: error: implicit declaration of function
‘iowrite16be’
--
Slawa!
N.P.S.
Les fleurs du mal unfold
Comme les fleurs du mal
Dark demons of my soul
Un amour fatal
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC] Removal of dead code from arch/arm/*
2010-10-21 8:19 ` Zimny Lech
@ 2010-10-21 10:00 ` Zimny Lech
-1 siblings, 0 replies; 36+ messages in thread
From: Zimny Lech @ 2010-10-21 10:00 UTC (permalink / raw)
To: linux-arm-kernel
2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
> I tried to cross compile allyesconfig to test my changes and I hit this
> ?CC ? ? ?drivers/gpio/janz-ttl.o
> drivers/gpio/janz-ttl.c: In function ?ttl_set_value?:
> drivers/gpio/janz-ttl.c:107: error: implicit declaration of function
> ?iowrite16be?
Another build error not caused by my patch AFAICS
CC drivers/input/touchscreen/eeti_ts.o
drivers/input/touchscreen/eeti_ts.c: In function ?eeti_ts_irq_active?:
drivers/input/touchscreen/eeti_ts.c:65: error: implicit declaration of
function ?irq_to_gpio?
--
Slawa!
N.P.S.
Les fleurs du mal unfold
Comme les fleurs du mal
Dark demons of my soul
Un amour fatal
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC] Removal of dead code from arch/arm/*
@ 2010-10-21 10:00 ` Zimny Lech
0 siblings, 0 replies; 36+ messages in thread
From: Zimny Lech @ 2010-10-21 10:00 UTC (permalink / raw)
To: Russell King - ARM Linux; +Cc: Eric Miao, linux-arm-kernel, linux-kernel
2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
> I tried to cross compile allyesconfig to test my changes and I hit this
> CC drivers/gpio/janz-ttl.o
> drivers/gpio/janz-ttl.c: In function ‘ttl_set_value’:
> drivers/gpio/janz-ttl.c:107: error: implicit declaration of function
> ‘iowrite16be’
Another build error not caused by my patch AFAICS
CC drivers/input/touchscreen/eeti_ts.o
drivers/input/touchscreen/eeti_ts.c: In function ‘eeti_ts_irq_active’:
drivers/input/touchscreen/eeti_ts.c:65: error: implicit declaration of
function ‘irq_to_gpio’
--
Slawa!
N.P.S.
Les fleurs du mal unfold
Comme les fleurs du mal
Dark demons of my soul
Un amour fatal
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC] Removal of dead code from arch/arm/*
2010-10-21 10:00 ` Zimny Lech
@ 2010-10-21 11:11 ` Zimny Lech
-1 siblings, 0 replies; 36+ messages in thread
From: Zimny Lech @ 2010-10-21 11:11 UTC (permalink / raw)
To: linux-arm-kernel
2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
> 2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
>> I tried to cross compile allyesconfig to test my changes and I hit this
>> ?CC ? ? ?drivers/gpio/janz-ttl.o
>> drivers/gpio/janz-ttl.c: In function ?ttl_set_value?:
>> drivers/gpio/janz-ttl.c:107: error: implicit declaration of function
>> ?iowrite16be?
>
> Another build error not caused by my patch AFAICS
>
> ?CC ? ? ?drivers/input/touchscreen/eeti_ts.o
> drivers/input/touchscreen/eeti_ts.c: In function ?eeti_ts_irq_active?:
> drivers/input/touchscreen/eeti_ts.c:65: error: implicit declaration of
> function ?irq_to_gpio?
>
Another one
CC drivers/mfd/ezx-pcap.o
drivers/mfd/ezx-pcap.c: In function ?pcap_isr_work?:
drivers/mfd/ezx-pcap.c:214: error: implicit declaration of function
?irq_to_gpio?
--
Slawa!
N.P.S.
Les fleurs du mal unfold
Comme les fleurs du mal
Dark demons of my soul
Un amour fatal
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC] Removal of dead code from arch/arm/*
@ 2010-10-21 11:11 ` Zimny Lech
0 siblings, 0 replies; 36+ messages in thread
From: Zimny Lech @ 2010-10-21 11:11 UTC (permalink / raw)
To: Russell King - ARM Linux; +Cc: linux-arm-kernel, linux-kernel
2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
> 2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
>> I tried to cross compile allyesconfig to test my changes and I hit this
>> CC drivers/gpio/janz-ttl.o
>> drivers/gpio/janz-ttl.c: In function ‘ttl_set_value’:
>> drivers/gpio/janz-ttl.c:107: error: implicit declaration of function
>> ‘iowrite16be’
>
> Another build error not caused by my patch AFAICS
>
> CC drivers/input/touchscreen/eeti_ts.o
> drivers/input/touchscreen/eeti_ts.c: In function ‘eeti_ts_irq_active’:
> drivers/input/touchscreen/eeti_ts.c:65: error: implicit declaration of
> function ‘irq_to_gpio’
>
Another one
CC drivers/mfd/ezx-pcap.o
drivers/mfd/ezx-pcap.c: In function ‘pcap_isr_work’:
drivers/mfd/ezx-pcap.c:214: error: implicit declaration of function
‘irq_to_gpio’
--
Slawa!
N.P.S.
Les fleurs du mal unfold
Comme les fleurs du mal
Dark demons of my soul
Un amour fatal
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC] Removal of dead code from arch/arm/*
2010-10-21 11:11 ` Zimny Lech
@ 2010-10-21 12:16 ` Zimny Lech
-1 siblings, 0 replies; 36+ messages in thread
From: Zimny Lech @ 2010-10-21 12:16 UTC (permalink / raw)
To: linux-arm-kernel
2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
> Another one
drivers/scsi/qla4xxx/ql4_nx.c: In function ?qla4_8xxx_pci_mem_read_direct?:
drivers/scsi/qla4xxx/ql4_nx.c:716: error: implicit declaration of
function ?readq?
drivers/scsi/qla4xxx/ql4_nx.c: In function ?qla4_8xxx_pci_mem_write_direct?:
drivers/scsi/qla4xxx/ql4_nx.c:787: error: implicit declaration of
function ?writeq?
--
Slawa!
N.P.S.
Les fleurs du mal unfold
Comme les fleurs du mal
Dark demons of my soul
Un amour fatal
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC] Removal of dead code from arch/arm/*
@ 2010-10-21 12:16 ` Zimny Lech
0 siblings, 0 replies; 36+ messages in thread
From: Zimny Lech @ 2010-10-21 12:16 UTC (permalink / raw)
To: Russell King - ARM Linux; +Cc: linux-arm-kernel, linux-kernel
2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
> Another one
drivers/scsi/qla4xxx/ql4_nx.c: In function ‘qla4_8xxx_pci_mem_read_direct’:
drivers/scsi/qla4xxx/ql4_nx.c:716: error: implicit declaration of
function ‘readq’
drivers/scsi/qla4xxx/ql4_nx.c: In function ‘qla4_8xxx_pci_mem_write_direct’:
drivers/scsi/qla4xxx/ql4_nx.c:787: error: implicit declaration of
function ‘writeq’
--
Slawa!
N.P.S.
Les fleurs du mal unfold
Comme les fleurs du mal
Dark demons of my soul
Un amour fatal
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC] Removal of dead code from arch/arm/*
2010-10-21 12:16 ` Zimny Lech
@ 2010-10-21 13:07 ` Zimny Lech
-1 siblings, 0 replies; 36+ messages in thread
From: Zimny Lech @ 2010-10-21 13:07 UTC (permalink / raw)
To: linux-arm-kernel
2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
> 2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
>
>> Another one
>
> drivers/scsi/qla4xxx/ql4_nx.c: In function ?qla4_8xxx_pci_mem_read_direct?:
> drivers/scsi/qla4xxx/ql4_nx.c:716: error: implicit declaration of
> function ?readq?
> drivers/scsi/qla4xxx/ql4_nx.c: In function ?qla4_8xxx_pci_mem_write_direct?:
> drivers/scsi/qla4xxx/ql4_nx.c:787: error: implicit declaration of
> function ?writeq?
CC drivers/scsi/advansys.o
drivers/scsi/advansys.c:72:2: warning: #warning this driver is still
not properly converted to the DMA API
drivers/scsi/advansys.c: In function ?AdvBuildCarrierFreelist?:
[..]
drivers/scsi/advansys.c:9360: warning: ?virt_to_bus? is deprecated
(declared at /home/test/linux-2.6/arch/arm/include/asm/memory.h:222)
drivers/serial/uartlite.c: In function ?ulite_receive?:
drivers/serial/uartlite.c:90: error: implicit declaration of function
?ioread32be?
drivers/serial/uartlite.c: In function ?ulite_transmit?:
drivers/serial/uartlite.c:135: error: implicit declaration of function
?iowrite32be?
Is it at all possible to build these things on arm? Maybe this should
be disabled on arm?
--
Slawa!
N.P.S.
Les fleurs du mal unfold
Comme les fleurs du mal
Dark demons of my soul
Un amour fatal
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC] Removal of dead code from arch/arm/*
@ 2010-10-21 13:07 ` Zimny Lech
0 siblings, 0 replies; 36+ messages in thread
From: Zimny Lech @ 2010-10-21 13:07 UTC (permalink / raw)
To: Russell King - ARM Linux; +Cc: linux-arm-kernel, linux-kernel
2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
> 2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
>
>> Another one
>
> drivers/scsi/qla4xxx/ql4_nx.c: In function ‘qla4_8xxx_pci_mem_read_direct’:
> drivers/scsi/qla4xxx/ql4_nx.c:716: error: implicit declaration of
> function ‘readq’
> drivers/scsi/qla4xxx/ql4_nx.c: In function ‘qla4_8xxx_pci_mem_write_direct’:
> drivers/scsi/qla4xxx/ql4_nx.c:787: error: implicit declaration of
> function ‘writeq’
CC drivers/scsi/advansys.o
drivers/scsi/advansys.c:72:2: warning: #warning this driver is still
not properly converted to the DMA API
drivers/scsi/advansys.c: In function ‘AdvBuildCarrierFreelist’:
[..]
drivers/scsi/advansys.c:9360: warning: ‘virt_to_bus’ is deprecated
(declared at /home/test/linux-2.6/arch/arm/include/asm/memory.h:222)
drivers/serial/uartlite.c: In function ‘ulite_receive’:
drivers/serial/uartlite.c:90: error: implicit declaration of function
‘ioread32be’
drivers/serial/uartlite.c: In function ‘ulite_transmit’:
drivers/serial/uartlite.c:135: error: implicit declaration of function
‘iowrite32be’
Is it at all possible to build these things on arm? Maybe this should
be disabled on arm?
--
Slawa!
N.P.S.
Les fleurs du mal unfold
Comme les fleurs du mal
Dark demons of my soul
Un amour fatal
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC] Removal of dead code from arch/arm/*
2010-10-21 7:54 ` Russell King - ARM Linux
@ 2010-10-21 20:52 ` Zimny Lech
-1 siblings, 0 replies; 36+ messages in thread
From: Zimny Lech @ 2010-10-21 20:52 UTC (permalink / raw)
To: linux-arm-kernel
2010/10/21 Russell King - ARM Linux <linux@arm.linux.org.uk>:
> On Thu, Oct 21, 2010 at 02:39:55AM +0200, N.P.S. wrote:
>> diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
>> index 38c261f..fd30b75 100644
>> --- a/arch/arm/kernel/time.c
>> +++ b/arch/arm/kernel/time.c
>> @@ -37,13 +37,9 @@
>> ? */
>> ?struct sys_timer *system_timer;
>>
>> -#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
>> +#if defined(CONFIG_RTC_DRV_CMOS)
>> ?/* this needs a better home */
>> ?DEFINE_SPINLOCK(rtc_lock);
>> -
>> -#ifdef CONFIG_RTC_DRV_CMOS_MODULE
>> -EXPORT_SYMBOL(rtc_lock);
>> -#endif
>> ?#endif ? ?/* pc-style 'CMOS' RTC support */
>>
>> ?/* change this if you have some constant time drift */
>
> This is wrong, and will break the build if rtc-cmos is built as a module.
>
Ok, I dropped this patch. Recreated tree can be found here
git pull git://github.com/napohybelskurwysynom2010/Linux-2.6-nps.git rodc2
I build tested it. Now should I send every patch for review to
developers? Could you pull this tree to arm-next (2.6.38)?
Regards,
ZL
--
Slawa!
N.P.S.
Les fleurs du mal unfold
Comme les fleurs du mal
Dark demons of my soul
Un amour fatal
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC] Removal of dead code from arch/arm/*
@ 2010-10-21 20:52 ` Zimny Lech
0 siblings, 0 replies; 36+ messages in thread
From: Zimny Lech @ 2010-10-21 20:52 UTC (permalink / raw)
To: Russell King - ARM Linux; +Cc: linux-arm-kernel, linux-kernel
2010/10/21 Russell King - ARM Linux <linux@arm.linux.org.uk>:
> On Thu, Oct 21, 2010 at 02:39:55AM +0200, N.P.S. wrote:
>> diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
>> index 38c261f..fd30b75 100644
>> --- a/arch/arm/kernel/time.c
>> +++ b/arch/arm/kernel/time.c
>> @@ -37,13 +37,9 @@
>> */
>> struct sys_timer *system_timer;
>>
>> -#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
>> +#if defined(CONFIG_RTC_DRV_CMOS)
>> /* this needs a better home */
>> DEFINE_SPINLOCK(rtc_lock);
>> -
>> -#ifdef CONFIG_RTC_DRV_CMOS_MODULE
>> -EXPORT_SYMBOL(rtc_lock);
>> -#endif
>> #endif /* pc-style 'CMOS' RTC support */
>>
>> /* change this if you have some constant time drift */
>
> This is wrong, and will break the build if rtc-cmos is built as a module.
>
Ok, I dropped this patch. Recreated tree can be found here
git pull git://github.com/napohybelskurwysynom2010/Linux-2.6-nps.git rodc2
I build tested it. Now should I send every patch for review to
developers? Could you pull this tree to arm-next (2.6.38)?
Regards,
ZL
--
Slawa!
N.P.S.
Les fleurs du mal unfold
Comme les fleurs du mal
Dark demons of my soul
Un amour fatal
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC] Removal of dead code from arch/arm/*
2010-10-21 20:52 ` Zimny Lech
@ 2010-10-22 1:13 ` Zimny Lech
-1 siblings, 0 replies; 36+ messages in thread
From: Zimny Lech @ 2010-10-22 1:13 UTC (permalink / raw)
To: linux-arm-kernel
2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
> Ok, I dropped this patch. Recreated tree can be found here
> git pull git://github.com/napohybelskurwysynom2010/Linux-2.6-nps.git rodc2
Sorry, I had to change the username, because some jerk denunciated me
on github ;)
git pull git://github.com/zimnylech/Linux-2.6-nps.git rodc2
>
> I build tested it. Now should I send every patch for review to
> developers? Could you pull this tree to arm-next (2.6.38)?
>
--
Slawa!
N.P.S.
Les fleurs du mal unfold
Comme les fleurs du mal
Dark demons of my soul
Un amour fatal
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC] Removal of dead code from arch/arm/*
@ 2010-10-22 1:13 ` Zimny Lech
0 siblings, 0 replies; 36+ messages in thread
From: Zimny Lech @ 2010-10-22 1:13 UTC (permalink / raw)
To: Russell King - ARM Linux; +Cc: linux-arm-kernel, linux-kernel
2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
> Ok, I dropped this patch. Recreated tree can be found here
> git pull git://github.com/napohybelskurwysynom2010/Linux-2.6-nps.git rodc2
Sorry, I had to change the username, because some jerk denunciated me
on github ;)
git pull git://github.com/zimnylech/Linux-2.6-nps.git rodc2
>
> I build tested it. Now should I send every patch for review to
> developers? Could you pull this tree to arm-next (2.6.38)?
>
--
Slawa!
N.P.S.
Les fleurs du mal unfold
Comme les fleurs du mal
Dark demons of my soul
Un amour fatal
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC] Removal of dead code from arch/arm/*
2010-10-22 1:13 ` Zimny Lech
@ 2010-10-22 14:19 ` Michał Mirosław
-1 siblings, 0 replies; 36+ messages in thread
From: Michał Mirosław @ 2010-10-22 14:19 UTC (permalink / raw)
To: linux-arm-kernel
2010/10/22 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
> 2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
>> Ok, I dropped this patch. Recreated tree can be found here
>> git pull git://github.com/napohybelskurwysynom2010/Linux-2.6-nps.git rodc2
> Sorry, I had to change the username, because some jerk denunciated me
> on github ;)
> git pull git://github.com/zimnylech/Linux-2.6-nps.git rodc2
You should use your real name and less offensive email address while
submitting patches. Unless you don't want to be taken seriously.
Best Regards,
Micha? Miros?aw
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC] Removal of dead code from arch/arm/*
@ 2010-10-22 14:19 ` Michał Mirosław
0 siblings, 0 replies; 36+ messages in thread
From: Michał Mirosław @ 2010-10-22 14:19 UTC (permalink / raw)
To: Zimny Lech; +Cc: Russell King - ARM Linux, linux-kernel, linux-arm-kernel
2010/10/22 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
> 2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
>> Ok, I dropped this patch. Recreated tree can be found here
>> git pull git://github.com/napohybelskurwysynom2010/Linux-2.6-nps.git rodc2
> Sorry, I had to change the username, because some jerk denunciated me
> on github ;)
> git pull git://github.com/zimnylech/Linux-2.6-nps.git rodc2
You should use your real name and less offensive email address while
submitting patches. Unless you don't want to be taken seriously.
Best Regards,
Michał Mirosław
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC] Removal of dead code from arch/arm/*
2010-10-22 14:19 ` Michał Mirosław
@ 2010-10-22 14:39 ` Zimny Lech
-1 siblings, 0 replies; 36+ messages in thread
From: Zimny Lech @ 2010-10-22 14:39 UTC (permalink / raw)
To: linux-arm-kernel
W dniu 22 pa?dziernika 2010 16:19 u?ytkownik Micha? Miros?aw
<mirqus@gmail.com> napisa?:
> 2010/10/22 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
>> 2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
>>> Ok, I dropped this patch. Recreated tree can be found here
>>> git pull git://github.com/napohybelskurwysynom2010/Linux-2.6-nps.git rodc2
>> Sorry, I had to change the username, because some jerk denunciated me
>> on github ;)
>> git pull git://github.com/zimnylech/Linux-2.6-nps.git rodc2
>
> You should use your real name and less offensive email address while
> submitting patches. Unless you don't want to be taken seriously.
Leszek Zimny is my _real_ name. What's wrong with my gmail username?
Does it affects quality of patch?
>
> Best Regards,
> Micha? Miros?aw
>
Kind regards,
Zimny
--
Slawa!
N.P.S.
Les fleurs du mal unfold
Comme les fleurs du mal
Dark demons of my soul
Un amour fatal
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC] Removal of dead code from arch/arm/*
@ 2010-10-22 14:39 ` Zimny Lech
0 siblings, 0 replies; 36+ messages in thread
From: Zimny Lech @ 2010-10-22 14:39 UTC (permalink / raw)
To: Michał Mirosław
Cc: Russell King - ARM Linux, linux-kernel, linux-arm-kernel
W dniu 22 października 2010 16:19 użytkownik Michał Mirosław
<mirqus@gmail.com> napisał:
> 2010/10/22 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
>> 2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
>>> Ok, I dropped this patch. Recreated tree can be found here
>>> git pull git://github.com/napohybelskurwysynom2010/Linux-2.6-nps.git rodc2
>> Sorry, I had to change the username, because some jerk denunciated me
>> on github ;)
>> git pull git://github.com/zimnylech/Linux-2.6-nps.git rodc2
>
> You should use your real name and less offensive email address while
> submitting patches. Unless you don't want to be taken seriously.
Leszek Zimny is my _real_ name. What's wrong with my gmail username?
Does it affects quality of patch?
>
> Best Regards,
> Michał Mirosław
>
Kind regards,
Zimny
--
Slawa!
N.P.S.
Les fleurs du mal unfold
Comme les fleurs du mal
Dark demons of my soul
Un amour fatal
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC] Removal of dead code from arch/arm/*
2010-10-22 14:39 ` Zimny Lech
@ 2010-10-22 15:15 ` Michał Mirosław
-1 siblings, 0 replies; 36+ messages in thread
From: Michał Mirosław @ 2010-10-22 15:15 UTC (permalink / raw)
To: linux-arm-kernel
W dniu 22 pa?dziernika 2010 16:39 u?ytkownik Zimny Lech
<napohybelskurwysynom2010@gmail.com> napisa?:
> W dniu 22 pa?dziernika 2010 16:19 u?ytkownik Micha? Miros?aw
> <mirqus@gmail.com> napisa?:
>> 2010/10/22 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
>>> 2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
>>>> Ok, I dropped this patch. Recreated tree can be found here
>>>> git pull git://github.com/napohybelskurwysynom2010/Linux-2.6-nps.git rodc2
>>> Sorry, I had to change the username, because some jerk denunciated me
>>> on github ;)
>>> git pull git://github.com/zimnylech/Linux-2.6-nps.git rodc2
>>
>> You should use your real name and less offensive email address while
>> submitting patches. Unless you don't want to be taken seriously.
>
> Leszek Zimny is my _real_ name. What's wrong with my gmail username?
> Does it affects quality of patch?
You might be a fan of Sapkowski's novels, and you might like to see
how people confuse your name with Polish brewery's advertisement,
sure. Still, it makes your mails look more like child's prank and not
a serious work.
BTW, you should know that Lech and Leszek are different names (even
though Leszek is often used as diminutive of Lech).
Best Regards,
Micha? Miros?aw
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC] Removal of dead code from arch/arm/*
@ 2010-10-22 15:15 ` Michał Mirosław
0 siblings, 0 replies; 36+ messages in thread
From: Michał Mirosław @ 2010-10-22 15:15 UTC (permalink / raw)
To: Zimny Lech; +Cc: Russell King - ARM Linux, linux-kernel, linux-arm-kernel
W dniu 22 października 2010 16:39 użytkownik Zimny Lech
<napohybelskurwysynom2010@gmail.com> napisał:
> W dniu 22 października 2010 16:19 użytkownik Michał Mirosław
> <mirqus@gmail.com> napisał:
>> 2010/10/22 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
>>> 2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
>>>> Ok, I dropped this patch. Recreated tree can be found here
>>>> git pull git://github.com/napohybelskurwysynom2010/Linux-2.6-nps.git rodc2
>>> Sorry, I had to change the username, because some jerk denunciated me
>>> on github ;)
>>> git pull git://github.com/zimnylech/Linux-2.6-nps.git rodc2
>>
>> You should use your real name and less offensive email address while
>> submitting patches. Unless you don't want to be taken seriously.
>
> Leszek Zimny is my _real_ name. What's wrong with my gmail username?
> Does it affects quality of patch?
You might be a fan of Sapkowski's novels, and you might like to see
how people confuse your name with Polish brewery's advertisement,
sure. Still, it makes your mails look more like child's prank and not
a serious work.
BTW, you should know that Lech and Leszek are different names (even
though Leszek is often used as diminutive of Lech).
Best Regards,
Michał Mirosław
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC] Removal of dead code from arch/arm/*
2010-10-22 1:13 ` Zimny Lech
@ 2010-10-25 23:35 ` Zimny Lech
-1 siblings, 0 replies; 36+ messages in thread
From: Zimny Lech @ 2010-10-25 23:35 UTC (permalink / raw)
To: linux-arm-kernel
2010/10/22 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
> 2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
>> Ok, I dropped this patch. Recreated tree can be found here
>> git pull git://github.com/napohybelskurwysynom2010/Linux-2.6-nps.git rodc2
>
> Sorry, I had to change the username, because some jerk denunciated me
> on github ;)
> git pull git://github.com/zimnylech/Linux-2.6-nps.git rodc2
Ping?
Kind regards,
Macavity
--
Slawa!
N.P.S.
Les fleurs du mal unfold
Comme les fleurs du mal
Dark demons of my soul
Un amour fatal
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC] Removal of dead code from arch/arm/*
@ 2010-10-25 23:35 ` Zimny Lech
0 siblings, 0 replies; 36+ messages in thread
From: Zimny Lech @ 2010-10-25 23:35 UTC (permalink / raw)
To: Russell King - ARM Linux; +Cc: linux-arm-kernel, linux-kernel
2010/10/22 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
> 2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
>> Ok, I dropped this patch. Recreated tree can be found here
>> git pull git://github.com/napohybelskurwysynom2010/Linux-2.6-nps.git rodc2
>
> Sorry, I had to change the username, because some jerk denunciated me
> on github ;)
> git pull git://github.com/zimnylech/Linux-2.6-nps.git rodc2
Ping?
Kind regards,
Macavity
--
Slawa!
N.P.S.
Les fleurs du mal unfold
Comme les fleurs du mal
Dark demons of my soul
Un amour fatal
^ permalink raw reply [flat|nested] 36+ messages in thread
* [RFC] Removal of dead code from arch/arm/*
2010-10-25 23:35 ` Zimny Lech
@ 2010-11-07 19:43 ` Russell King - ARM Linux
-1 siblings, 0 replies; 36+ messages in thread
From: Russell King - ARM Linux @ 2010-11-07 19:43 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Oct 26, 2010 at 01:35:26AM +0200, Zimny Lech wrote:
> 2010/10/22 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
> > 2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
> >> Ok, I dropped this patch. Recreated tree can be found here
> >> git pull git://github.com/napohybelskurwysynom2010/Linux-2.6-nps.git rodc2
> >
> > Sorry, I had to change the username, because some jerk denunciated me
> > on github ;)
> > git pull git://github.com/zimnylech/Linux-2.6-nps.git rodc2
>
> Ping?
I'm not taking it as a git pull as it seems to contain changes outside
of ARM. I think you need to split your patch up, and post it to relevant
lists as a series of patches, also making sure that you copy the relevant
people.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [RFC] Removal of dead code from arch/arm/*
@ 2010-11-07 19:43 ` Russell King - ARM Linux
0 siblings, 0 replies; 36+ messages in thread
From: Russell King - ARM Linux @ 2010-11-07 19:43 UTC (permalink / raw)
To: Zimny Lech; +Cc: linux-arm-kernel, linux-kernel
On Tue, Oct 26, 2010 at 01:35:26AM +0200, Zimny Lech wrote:
> 2010/10/22 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
> > 2010/10/21 Zimny Lech <napohybelskurwysynom2010@gmail.com>:
> >> Ok, I dropped this patch. Recreated tree can be found here
> >> git pull git://github.com/napohybelskurwysynom2010/Linux-2.6-nps.git rodc2
> >
> > Sorry, I had to change the username, because some jerk denunciated me
> > on github ;)
> > git pull git://github.com/zimnylech/Linux-2.6-nps.git rodc2
>
> Ping?
I'm not taking it as a git pull as it seems to contain changes outside
of ARM. I think you need to split your patch up, and post it to relevant
lists as a series of patches, also making sure that you copy the relevant
people.
^ permalink raw reply [flat|nested] 36+ messages in thread