Re: sstate status

[Gary Thomas <gary@mlbassoc.com>]

On 12/03/2010 04:31 PM, Gary Thomas wrote:
> On 12/03/2010 09:34 AM, Paul Eggleton wrote:
>> Hi all,
>>
>> I've been doing some tests with sstate, and I've managed to get to a
>> stage where I can share the SSTATE_DIR between my two machines (one
>> running Fedora 14 and the other Kubuntu 10.10) and almost get a
>> successful build from a clean TMPDIR. My last test got to
>> poky-image-minimal.do_rootfs and then failed due to some kind of
>> package dependency issue:
>>
>> --------- snip ---------
>> | Processing rpm...
>> | Processing zypper...
>> | error: Failed dependencies:
>> | elfutils>= 0.148 is needed by rpm-5.1.10-r7.i586
>> | libaugeas0>= 0.7.3 is needed by
>> zypper-1.4.7+git0+9eb0e248e06c8d20ad054be2439149d9ede37531-r1.i586
>> | ERROR: Task failed: ('function do_rootfs failed',
>> '/home/pokystuff/tmp/work/qemux86-poky-linux/poky-image-minimal-1.0-r0/temp/log.do_rootfs.6874')
>>
>> --------- snip ---------
>>
>> A "bitbake -c clean augeas elfutils" and then "bitbake
>> poky-image-minimal" again went through OK (and built the
>> aforementioned recipes from sstate) , so I'm not sure what went wrong
>> here.
>>
>> My current state of work is in the paule/sstate contrib branch, which
>> is based on Kevin's tk/sstate branch. Kevin, I think the sooner we can
>> move this towards master the better, then we can get some wider testing.
>>
>> FYI Joshua has made bug #507 into a tracking bug for current sstate
>> issues:
>> http://bugzilla.pokylinux.org/show_bug.cgi?id=507
>
> I gave this a simple try and it failed miserably. Working from a copy of
> Paul's branch in poky-contrib, here's what I did:
>
> * On machine A (x86 Fedora 11)
> % bitbake poky-image-minimal
>
> * On machine B (x86 Fedora 13)
> -- Copy sstate-cache from machine A to /tmp/sstate-cache (rsync with
> all perms & timestamps preserved)
> -- Using the identical conf/local.conf file from machine A, except
> I set up SSTATE_MIRRORS like this
> SSTATE_MIRRORS ?= "\
> file://.* file:///tmp/sstate-cache/"
> % bitbake poky-image-minimal
>
> Fell apart pretty badly. Look at the output
> http://www.mlbassoc.com/poky/poky_with_sstate.out
>
> Also, it seemed to be rebuilding a lot of packages. IMO, there's
> no reason it should have to rebuild _any_
>

One thing that seems to be significant is the base build directory path.
In the case above, they did not match, i.e.
   * On machine A, BUILDDIR=/tmp/sstate_testing
   * On machine B, BUILDDIR=/home/local/my_sstate_test
I tried it this way as it matches my [customer's] expected usage.

I've rerun the experiment again where I used identical paths on both
machines and the results were vastly improved.  It still takes a horrible
length of time (64 minutes on a fast 4 processor box) and rebuilds way to
many packages for just replaying what's already been done though (IMO).
Results are at
   http://www.mlbassoc.com/poky/poky_with_sstate_same_paths.out

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------