got error while trying to pull the krb5 package into poky

got error while trying to pull the krb5 package into poky

[v sailaja]

[-- Attachment #1: Type: text/plain, Size: 2093 bytes --]

Hi,

I tried with the following


              bitbake krb5  -c cleanall
              bitbake krb5
But again I am getting the same error and krb5 rpm file is not generated at
tmp/deploy/rpm.


 The value is

*PACKAGE_CLASSES ?= "package_rpm package_ipk"*

*
error:*
 Generating solve db for
/home/sailaja/poky-chrome/build/tmp/deploy/rpm/atom-pc...
|    total:               1      0.000000 MB      0.871674 secs
|    order:               1      0.000000 MB      0.090471 secs
|    fingerprint:       537      0.007286 MB      0.081155 secs
|    install:           278      0.000000 MB      0.179576 secs
|    dbadd:             278      0.000000 MB      0.081411 secs
|    dbget:            8678      1.128312 MB      0.016757 secs
|    dbput:            5035      2.213572 MB      0.020290 secs
|    readhdr:          2781      2.267168 MB      0.206626 secs
|    hdrload:        194461    256.103876 MB      1.118980 secs
|    hdrget:        3861605      0.000000 MB      6.181097 secs
| *Processing krb5...
| Unable to find package krb5!
| ERROR: Task failed: ('function do_rootfs failed',
'/home/sailaja/poky-chrome/build/tmp/work/atom-pc-poky-linux/poky-image-minimal-akshat-1.0-r0/temp/log.do_rootfs.9313')
NOTE: package poky-image-minimal-akshat-1.0-r0: task do_rootfs: Failed*
ERROR: Task 179 (/home/sailaja/poky-chrome/meta/recipes-core/images/
poky-image-minimal-akshat.bb, do_rootfs) failed with 1
ERROR: '/home/sailaja/poky-chrome/meta/recipes-core/images/
poky-image-minimal-akshat.bb' failed



Please help me in finding the solution.
Any help  would be greatly apprecited.

Thanks & Regards,
SAI








 Hi SAI,
>
>
>
> Please try the following to rebuild the krb5 to see if the rpm is
> generated:
>
>
>
> -          bitbake krb5  -c cleanall
>
> -          bitbake krb5
>
>
>
> This should generate the rpm file under the directory of “tmp/deploy/rpm”.
>
>
>
> b.t.w. what’s the value set to the variable PACKAGE_CLASSES in your
> conf/local.conf?
>
>
>
> Best Regards,
>
> Lianhao Lu
>
>

[-- Attachment #2: Type: text/html, Size: 5431 bytes --]

Re: got error while trying to pull the krb5 package into poky

[Mark Hatle]

On 3/1/11 4:45 AM, v sailaja wrote:
> Hi,
> 
> I tried with the following
>                       
> 
>               bitbake krb5  -c cleanall  
>               bitbake krb5
> But again I am getting the same error and krb5 rpm file is not generated at 
> tmp/deploy/rpm.
> 
> 
>  The value is
> 
> *PACKAGE_CLASSES ?= "package_rpm package_ipk"*
> 
> *
> error:*
>  Generating solve db for /home/sailaja/poky-chrome/build/tmp/deploy/rpm/atom-pc...
> |    total:               1      0.000000 MB      0.871674 secs
> |    order:               1      0.000000 MB      0.090471 secs
> |    fingerprint:       537      0.007286 MB      0.081155 secs
> |    install:           278      0.000000 MB      0.179576 secs
> |    dbadd:             278      0.000000 MB      0.081411 secs
> |    dbget:            8678      1.128312 MB      0.016757 secs
> |    dbput:            5035      2.213572 MB      0.020290 secs
> |    readhdr:          2781      2.267168 MB      0.206626 secs
> |    hdrload:        194461    256.103876 MB      1.118980 secs
> |    hdrget:        3861605      0.000000 MB      6.181097 secs
> | *Processing krb5...
> | Unable to find package krb5!
> | ERROR: Task failed: ('function do_rootfs failed',

The error may not be completely clear, but this means that there is no package
in tmp/deploy/rpm/* called "krb5".  In otherwords, there is a package
requirement that is not being met.

Figure out where the requirement is coming from and that will lead you toward a
possible cause.

rpm --qf "[%{NAME} %{REQUIRES}\n]" -qp <packages>

That will list the name of the package, followed by a requirement.  This should
allow you to figure out what is requiring krb5..

--Mark

> '/home/sailaja/poky-chrome/build/tmp/work/atom-pc-poky-linux/poky-image-minimal-akshat-1.0-r0/temp/log.do_rootfs.9313')
> NOTE: package poky-image-minimal-akshat-1.0-r0: task do_rootfs: Failed*
> ERROR: Task 179
> (/home/sailaja/poky-chrome/meta/recipes-core/images/poky-image-minimal-akshat.bb
> <http://poky-image-minimal-akshat.bb/>, do_rootfs) failed with 1
> ERROR:
> '/home/sailaja/poky-chrome/meta/recipes-core/images/poky-image-minimal-akshat.bb
> <http://poky-image-minimal-akshat.bb/>' failed
> 
> 
> 
> Please help me in finding the solution.
> Any help  would be greatly apprecited.
> 
> Thanks & Regards,
> SAI
> 
> 
> 
> 
> 
> 
> 
> 
>     Hi SAI,
> 
>      
> 
>     Please try the following to rebuild the krb5 to see if the rpm is generated:
> 
>      
> 
>     -          bitbake krb5  -c cleanall
> 
>     -          bitbake krb5
> 
>      
> 
>     This should generate the rpm file under the directory of “tmp/deploy/rpm”.
> 
>      
> 
>     b.t.w. what’s the value set to the variable PACKAGE_CLASSES in your
>     conf/local.conf?
> 
>      
> 
>     Best Regards,
> 
>     Lianhao Lu
> 
> 
> 
> 
> 
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky

Re: got error while trying to pull the krb5 package into poky

[Lu, Lianhao]

[-- Attachment #1: Type: text/plain, Size: 2716 bytes --]

Hi SAI,

Does the "bitbake krb5" succeed? If it does, the rpm file it generated should be  under the directory tmp/deploy/rpm/core2 if you set MACHINE to atom-pc in conf/local.conf. Or you may check at the directory "/home/sailaja/poky-chrome/build/tmp/work/core2-poky-linux/krb5-1.6.3-r6/deploy-rpms", the RPM file is actually created here and later gets copied to tmp/deploy/rpm.

Best Regards,
Lianhao

From: v sailaja [mailto:vsailub4u@gmail.com]
Sent: Tuesday, March 01, 2011 6:46 PM
To: Lu, Lianhao; Tian, Kevin; poky@yoctoproject.org
Subject: got error while trying to pull the krb5 package into poky

Hi,

I tried with the following


              bitbake krb5  -c cleanall
              bitbake krb5
But again I am getting the same error and krb5 rpm file is not generated at  tmp/deploy/rpm.


 The value is

PACKAGE_CLASSES ?= "package_rpm package_ipk"


error:
 Generating solve db for /home/sailaja/poky-chrome/build/tmp/deploy/rpm/atom-pc...
|    total:               1      0.000000 MB      0.871674 secs
|    order:               1      0.000000 MB      0.090471 secs
|    fingerprint:       537      0.007286 MB      0.081155 secs
|    install:           278      0.000000 MB      0.179576 secs
|    dbadd:             278      0.000000 MB      0.081411 secs
|    dbget:            8678      1.128312 MB      0.016757 secs
|    dbput:            5035      2.213572 MB      0.020290 secs
|    readhdr:          2781      2.267168 MB      0.206626 secs
|    hdrload:        194461    256.103876 MB      1.118980 secs
|    hdrget:        3861605      0.000000 MB      6.181097 secs
| Processing krb5...
| Unable to find package krb5!
| ERROR: Task failed: ('function do_rootfs failed', '/home/sailaja/poky-chrome/build/tmp/work/atom-pc-poky-linux/poky-image-minimal-akshat-1.0-r0/temp/log.do_rootfs.9313')
NOTE: package poky-image-minimal-akshat-1.0-r0: task do_rootfs: Failed
ERROR: Task 179 (/home/sailaja/poky-chrome/meta/recipes-core/images/poky-image-minimal-akshat.bb<http://poky-image-minimal-akshat.bb/>, do_rootfs) failed with 1
ERROR: '/home/sailaja/poky-chrome/meta/recipes-core/images/poky-image-minimal-akshat.bb<http://poky-image-minimal-akshat.bb/>' failed



Please help me in finding the solution.
Any help  would be greatly apprecited.

Thanks & Regards,
SAI







Hi SAI,

Please try the following to rebuild the krb5 to see if the rpm is generated:


-          bitbake krb5  -c cleanall

-          bitbake krb5

This should generate the rpm file under the directory of "tmp/deploy/rpm".

b.t.w. what's the value set to the variable PACKAGE_CLASSES in your conf/local.conf?

Best Regards,
Lianhao Lu



[-- Attachment #2: Type: text/html, Size: 14798 bytes --]

Re: got error while trying to pull the krb5 package into poky

[v sailaja]

[-- Attachment #1: Type: text/plain, Size: 4640 bytes --]

Hi Lianhao,

There are *krb5-dev-1.6.3-r6.core2.rpm* and *krb5-dbg-1.6.3-r6.core2.rpm*
in
/home/sailaja/poky-chrome/build/tmp/work/core2-poky-linux/krb5-1.6.3-r6/deploy-rpms
.
But  there is* no specific rpm on krb5* like * krb5-1.6.3-r6.rpm*.

Again its showing an error as follows:

*error:*

readhdr:          2781      2.267168 MB      0.206626 secs
|    hdrload:        194461    256.103876 MB      1.118980 secs
|    hdrget:        3861605      0.000000 MB      6.181097 secs
| *Processing krb5...
| Unable to find package krb5!
| ERROR: Task failed: ('function do_rootfs failed',
'/home/sailaja/poky-chrome/build/tmp/work/atom-pc-poky-linux/poky-image-minimal-akshat-1.0-r0/temp/log.do_rootfs.9313')
NOTE: package poky-image-minimal-akshat-1.0-r0: task do_rootfs: Failed*
ERROR: Task 179 (/home/sailaja/poky-chrome/meta/recipes-core/images/
poky-image-minimal-akshat.bb, do_rootfs) failed with 1
ERROR: '/home/sailaja/poky-chrome/meta/recipes-core/images/
poky-image-minimal-akshat.bb' failed


I am facing the same problem with some more packages like *xcb-proto*

 Processing xcb-proto...
| *Unable to find package xcb-proto!*
| ERROR: Task failed: ('function do_rootfs failed',
'/home/sailaja/poky-chrome/build/tmp/work/atom-pc-poky-linux/poky-image-minimal-akshat-1.0-r0/temp/log.do_rootfs.16360')
NOTE: package poky-image-minimal-akshat-1.0-r0: task do_rootfs: Failed
ERROR: Task 191 (/home/sailaja/poky-chrome/meta/recipes-core/images/
poky-image-minimal-akshat.bb, do_rootfs) failed with 1
ERROR: '/home/sailaja/poky-chrome/meta/recipes-core/images/
poky-image-minimal-akshat.bb' failed.


Please help in fixing the problem.
Could you please tell me what can I do now?

Thanks & Regards,
SAI




 Hi SAI,
>
>
>
> Does the “bitbake krb5” succeed? If it does, the rpm file it generated
> should be  under the directory tmp/deploy/rpm/core2 if you set MACHINE to
> atom-pc in conf/local.conf. Or you may check at the directory
> “/home/sailaja/poky-chrome/build/tmp/work/core2-poky-linux/krb5-1.6.3-r6/deploy-rpms”,
> the RPM file is actually created here and later gets copied to
> tmp/deploy/rpm.
>
>
>
> Best Regards,
>
> Lianhao
>
>
>
> *From:* v sailaja [mailto:vsailub4u@gmail.com]
> *Sent:* Tuesday, March 01, 2011 6:46 PM
> *To:* Lu, Lianhao; Tian, Kevin; poky@yoctoproject.org
> *Subject:* got error while trying to pull the krb5 package into poky
>
>
>
> Hi,
>
> I tried with the following
>
>
>               bitbake krb5  -c cleanall
>               bitbake krb5
> But again I am getting the same error and krb5 rpm file is not generated
> at  tmp/deploy/rpm.
>
>
>  The value is
>
> *PACKAGE_CLASSES ?= "package_rpm package_ipk"*
>
> *
> error:*
>  Generating solve db for
> /home/sailaja/poky-chrome/build/tmp/deploy/rpm/atom-pc...
> |    total:               1      0.000000 MB      0.871674 secs
> |    order:               1      0.000000 MB      0.090471 secs
> |    fingerprint:       537      0.007286 MB      0.081155 secs
> |    install:           278      0.000000 MB      0.179576 secs
> |    dbadd:             278      0.000000 MB      0.081411 secs
> |    dbget:            8678      1.128312 MB      0.016757 secs
> |    dbput:            5035      2.213572 MB      0.020290 secs
> |    readhdr:          2781      2.267168 MB      0.206626 secs
> |    hdrload:        194461    256.103876 MB      1.118980 secs
> |    hdrget:        3861605      0.000000 MB      6.181097 secs
> | *Processing krb5...
> | Unable to find package krb5!
> | ERROR: Task failed: ('function do_rootfs failed',
> '/home/sailaja/poky-chrome/build/tmp/work/atom-pc-poky-linux/poky-image-minimal-akshat-1.0-r0/temp/log.do_rootfs.9313')
> NOTE: package poky-image-minimal-akshat-1.0-r0: task do_rootfs: Failed*
> ERROR: Task 179 (/home/sailaja/poky-chrome/meta/recipes-core/images/
> poky-image-minimal-akshat.bb, do_rootfs) failed with 1
> ERROR: '/home/sailaja/poky-chrome/meta/recipes-core/images/
> poky-image-minimal-akshat.bb' failed
>
>
>
> Please help me in finding the solution.
> Any help  would be greatly apprecited.
>
> Thanks & Regards,
> SAI
>
>
>
>
>
>
>
>
> Hi SAI,
>
>
>
> Please try the following to rebuild the krb5 to see if the rpm is
> generated:
>
>
>
> -          bitbake krb5  -c cleanall
>
> -          bitbake krb5
>
>
>
> This should generate the rpm file under the directory of “tmp/deploy/rpm”.
>
>
>
> b.t.w. what’s the value set to the variable PACKAGE_CLASSES in your
> conf/local.conf?
>
>
>
> Best Regards,
>
> Lianhao Lu
>
>
>
>
>

[-- Attachment #2: Type: text/html, Size: 10935 bytes --]

Re: got error while trying to pull the krb5 package into poky

[Richard Purdie]

On Wed, 2011-03-02 at 17:05 +0530, v sailaja wrote:
> Hi Lianhao,
> 
> There are krb5-dev-1.6.3-r6.core2.rpm and krb5-dbg-1.6.3-r6.core2.rpm
> in  /home/sailaja/poky-chrome/build/tmp/work/core2-poky-linux/krb5-1.6.3-r6/deploy-rpms.
> But  there is no specific rpm on krb5 like  krb5-1.6.3-r6.rpm.
> 
> Again its showing an error as follows:

This probably means the contents of the krb5 package was empty and it
didn't build the package.

> I am facing the same problem with some more packages like xcb-proto

The contents of xcb-proto *is* empty since its just development headers
and they end up in the xcb-proto-dev package.

Cheers,

Richard

Re: got error while trying to pull the krb5 package into poky

[Gary Thomas]

On 03/02/2011 04:35 AM, v sailaja wrote:
> Hi Lianhao,
>
> There are *krb5-dev-1.6.3-r6.core2.rpm* and *krb5-dbg-1.6.3-r6.core2.rpm*  in /home/sailaja/poky-chrome/build/tmp/work/core2-poky-linux/krb5-1.6.3-r6/deploy-rpms.
> But  there is*no specific rpm on krb5* like *krb5-1.6.3-r6.rpm*.
>
> Again its showing an error as follows:
>
> _*error:*_
>
> readhdr:          2781      2.267168 MB      0.206626 secs
> |    hdrload:        194461    256.103876 MB      1.118980 secs
> |    hdrget:        3861605      0.000000 MB      6.181097 secs
> | *Processing krb5...
> | Unable to find package krb5!
> | ERROR: Task failed: ('function do_rootfs failed', '/home/sailaja/poky-chrome/build/tmp/work/atom-pc-poky-linux/poky-image-minimal-akshat-1.0-r0/temp/log.do_rootfs.9313')
> NOTE: package poky-image-minimal-akshat-1.0-r0: task do_rootfs: Failed*
> ERROR: Task 179 (/home/sailaja/poky-chrome/meta/recipes-core/images/poky-image-minimal-akshat.bb <http://poky-image-minimal-akshat.bb/>, do_rootfs) failed with 1
> ERROR: '/home/sailaja/poky-chrome/meta/recipes-core/images/poky-image-minimal-akshat.bb <http://poky-image-minimal-akshat.bb/>' failed
>
>
> I am facing the same problem with some more packages like *xcb-proto*
>
>   Processing xcb-proto...
> | *Unable to find package xcb-proto!*
> | ERROR: Task failed: ('function do_rootfs failed', '/home/sailaja/poky-chrome/build/tmp/work/atom-pc-poky-linux/poky-image-minimal-akshat-1.0-r0/temp/log.do_rootfs.16360')
> NOTE: package poky-image-minimal-akshat-1.0-r0: task do_rootfs: Failed
> ERROR: Task 191 (/home/sailaja/poky-chrome/meta/recipes-core/images/poky-image-minimal-akshat.bb <http://poky-image-minimal-akshat.bb>, do_rootfs) failed with 1
> ERROR: '/home/sailaja/poky-chrome/meta/recipes-core/images/poky-image-minimal-akshat.bb <http://poky-image-minimal-akshat.bb>' failed.

What recipe/package is including xcb-proto?  As far as I can see, this is a developmental
header only package.  The only uses I could find were for xcb-proto-native

Similarly, there are only the -dev and -dbg variants of this package built (it's been
this way for many months at least).  Here's what I have from a fully working build:
   $ ls /local/p60_poky/tmp/deploy/ipk/*/xcb-proto*
   /local/p60_poky/tmp/deploy/ipk/armv7a/xcb-proto-dbg_1.6-r0_armv7a.ipk
   /local/p60_poky/tmp/deploy/ipk/armv7a/xcb-proto-dev_1.6-r0_armv7a.ipk

>
>     Hi SAI,
>
>     Does the “bitbake krb5” succeed? If it does, the rpm file it generated should be  under the directory tmp/deploy/rpm/core2 if you set MACHINE to atom-pc in conf/local.conf. Or
>     you may check at the directory “/home/sailaja/poky-chrome/build/tmp/work/core2-poky-linux/krb5-1.6.3-r6/deploy-rpms”, the RPM file is actually created here and later gets
>     copied to tmp/deploy/rpm.
>
>     Best Regards,
>
>     Lianhao
>
>     *From:*v sailaja [mailto:vsailub4u@gmail.com <mailto:vsailub4u@gmail.com>]
>     *Sent:* Tuesday, March 01, 2011 6:46 PM
>     *To:* Lu, Lianhao; Tian, Kevin; poky@yoctoproject.org <mailto:poky@yoctoproject.org>
>     *Subject:* got error while trying to pull the krb5 package into poky
>
>     Hi,
>
>     I tried with the following
>
>
>                    bitbake krb5  -c cleanall
>                    bitbake krb5
>     But again I am getting the same error and krb5 rpm file is not generated at  tmp/deploy/rpm.
>
>
>       The value is
>
>     *PACKAGE_CLASSES ?= "package_rpm package_ipk"*
>
>     *
>     error:*
>       Generating solve db for /home/sailaja/poky-chrome/build/tmp/deploy/rpm/atom-pc...
>     |    total:               1      0.000000 MB      0.871674 secs
>     |    order:               1      0.000000 MB      0.090471 secs
>     |    fingerprint:       537      0.007286 MB      0.081155 secs
>     |    install:           278      0.000000 MB      0.179576 secs
>     |    dbadd:             278      0.000000 MB      0.081411 secs
>     |    dbget:            8678      1.128312 MB      0.016757 secs
>     |    dbput:            5035      2.213572 MB      0.020290 secs
>     |    readhdr:          2781      2.267168 MB      0.206626 secs
>     |    hdrload:        194461    256.103876 MB      1.118980 secs
>     |    hdrget:        3861605      0.000000 MB      6.181097 secs
>     | *Processing krb5...
>     | Unable to find package krb5!
>     | ERROR: Task failed: ('function do_rootfs failed', '/home/sailaja/poky-chrome/build/tmp/work/atom-pc-poky-linux/poky-image-minimal-akshat-1.0-r0/temp/log.do_rootfs.9313')
>     NOTE: package poky-image-minimal-akshat-1.0-r0: task do_rootfs: Failed*
>     ERROR: Task 179 (/home/sailaja/poky-chrome/meta/recipes-core/images/poky-image-minimal-akshat.bb <http://poky-image-minimal-akshat.bb/>, do_rootfs) failed with 1
>     ERROR: '/home/sailaja/poky-chrome/meta/recipes-core/images/poky-image-minimal-akshat.bb <http://poky-image-minimal-akshat.bb/>' failed
>
>
>
>     Please help me in finding the solution.
>     Any help  would be greatly apprecited.
>
>     Thanks & Regards,
>     SAI
>
>
>
>
>
>
>         Hi SAI,
>
>         Please try the following to rebuild the krb5 to see if the rpm is generated:
>
>         -bitbake krb5  -c cleanall
>
>         -bitbake krb5
>
>         This should generate the rpm file under the directory of “tmp/deploy/rpm”.
>
>         b.t.w. what’s the value set to the variable PACKAGE_CLASSES in your conf/local.conf?
>
>         Best Regards,
>
>         Lianhao Lu
>
>
>
>
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

Re: got error while trying to pull the krb5 package into poky

[v sailaja]

[-- Attachment #1: Type: text/plain, Size: 1006 bytes --]

Hi,

I came to know with other contacts, building poky with its own krb5 package,
there were no issues.
But if we copied that krb5 package from openembedded, it showed the errors.
Please tell me Why is it so happening?
Please help me  and fixing the problem

Thanks & Regards,
Sai



On Wed, 2011-03-02 at 17:05 +0530, v sailaja wrote:
> > Hi Lianhao,
> >
> > There are krb5-dev-1.6.3-r6.core2.rpm and krb5-dbg-1.6.3-r6.core2.rpm
> > in
>  /home/sailaja/poky-chrome/build/tmp/work/core2-poky-linux/krb5-1.6.3-r6/deploy-rpms.
> > But  there is no specific rpm on krb5 like  krb5-1.6.3-r6.rpm.
> >
> > Again its showing an error as follows:
>
> This probably means the contents of the krb5 package was empty and it
> didn't build the package.
>
> > I am facing the same problem with some more packages like xcb-proto
>
> The contents of xcb-proto *is* empty since its just development headers
> and they end up in the xcb-proto-dev package.
>
> Cheers,
>
> Richard
>
>
>

[-- Attachment #2: Type: text/html, Size: 1368 bytes --]

Re: got error while trying to pull the krb5 package into poky

[Gary Thomas]

On 03/02/2011 07:24 AM, v sailaja wrote:
>
> Hi,
>
> I came to know with other contacts, building poky with its own krb5 package, there were no issues.

What package was that?  I don't see any krb5 packages of any kind in Poky.

> But if we copied that krb5 package from openembedded, it showed the errors.
> Please tell me Why is it so happening?
> Please help me  and fixing the problem

Most likely you need to update the OE recipe to not use do_stage()

>     On Wed, 2011-03-02 at 17:05 +0530, v sailaja wrote:
>     >  Hi Lianhao,
>     >
>     >  There are krb5-dev-1.6.3-r6.core2.rpm and krb5-dbg-1.6.3-r6.core2.rpm
>     >  in  /home/sailaja/poky-chrome/build/tmp/work/core2-poky-linux/krb5-1.6.3-r6/deploy-rpms.
>     >  But  there is no specific rpm on krb5 like  krb5-1.6.3-r6.rpm.
>     >
>     >  Again its showing an error as follows:
>
>     This probably means the contents of the krb5 package was empty and it
>     didn't build the package.
>
>     >  I am facing the same problem with some more packages like xcb-proto
>
>     The contents of xcb-proto *is* empty since its just development headers
>     and they end up in the xcb-proto-dev package.

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

Re: got error while trying to pull the krb5 package into poky

[Mark Hatle]

On 3/2/11 8:24 AM, v sailaja wrote:
> 
> Hi,
> 
> I came to know with other contacts, building poky with its own krb5 package,
> there were no issues.
> But if we copied that krb5 package from openembedded, it showed the errors.
> Please tell me Why is it so happening?
> Please help me  and fixing the problem

AFAIK, Poky doesn't have a krb5 recipe of it's own.

Before you dig into the krb5 package, why are you adding krb5 support to your
device?  Is there a specific reason or did it just show up as a dependency for
something?  (Many times on the desktop, krb5 is provided by default and gets
linked into all sorts of things..  but in an embedded environment it's rarely
used as there is no reason to coordinate with a kerberos server on user
identity.  If you decide kerberos support is NOT needed, figure out where the
krb5 dependency is coming from and figure out if you can remove it from the
package and/or recipe.)

(But if you do need krb5...) If you import it from OpenEmbedded, something is
either wrong with the krb5 recipe -- not populating the base "krb5" package --
or something is wrong with the software that is requiring krb5.

The first thing to do is look at the krb5 package and see if any of the software
it has built belongs in a base krb5 package and isn't being properly
installed.... fix the do_install rule to install the missing components...

if there is no software to install into a krb5 package -- then it appears to me
whatever is attempting to require the run-time dependency of "krb5" is broken.
You should find the recipe that has the RDEPENDS and remove it -- or change the
dependency to something more appropriate such a the krb5-libs.  (Note:  most of
the time there is no reason to manually state a RDEPENDS on a -libs package,
because the system figured out run-time library dependencies automatically --
only library usages where you can't automatically detect things need RDEPENDS,
this is usually the case when things are dlopened.)

--Mark

> Thanks & Regards,
> Sai
> 
> 
> 
>     On Wed, 2011-03-02 at 17:05 +0530, v sailaja wrote:
>     > Hi Lianhao,
>     >
>     > There are krb5-dev-1.6.3-r6.core2.rpm and krb5-dbg-1.6.3-r6.core2.rpm
>     > in
>      /home/sailaja/poky-chrome/build/tmp/work/core2-poky-linux/krb5-1.6.3-r6/deploy-rpms.
>     > But  there is no specific rpm on krb5 like  krb5-1.6.3-r6.rpm.
>     >
>     > Again its showing an error as follows:
> 
>     This probably means the contents of the krb5 package was empty and it
>     didn't build the package.
> 
>     > I am facing the same problem with some more packages like xcb-proto
> 
>     The contents of xcb-proto *is* empty since its just development headers
>     and they end up in the xcb-proto-dev package.
> 
>     Cheers,
> 
>     Richard
> 
> 
> 
> 
> 
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky

Re: got error while trying to pull the krb5 package into poky

[v sailaja]

[-- Attachment #1: Type: text/plain, Size: 3554 bytes --]

Hi  Hatle,


I need to pull krb5 into poky. But *Krb5 rpm is not created* at the build
time.
its as stated below:

*Not creating empty RPM package for krb5.*

so that the rpm was not creating for krb5.
Please tell me what are the dependencies and How to resolve this problem. I
need to pull it into poky.
Your explanation gave me an idea on krb5.



Thanks & Regards,
SAI






> > Hi,
> >
> > I came to know with other contacts, building poky with its own krb5
> package,
> > there were no issues.
> > But if we copied that krb5 package from openembedded, it showed the
> errors.
> > Please tell me Why is it so happening?
> > Please help me  and fixing the problem
>
> AFAIK, Poky doesn't have a krb5 recipe of it's own.
>
> Before you dig into the krb5 package, why are you adding krb5 support to
> your
> device?  Is there a specific reason or did it just show up as a dependency
> for
> something?  (Many times on the desktop, krb5 is provided by default and
> gets
> linked into all sorts of things..  but in an embedded environment it's
> rarely
> used as there is no reason to coordinate with a kerberos server on user
> identity.  If you decide kerberos support is NOT needed, figure out where
> the
> krb5 dependency is coming from and figure out if you can remove it from the
> package and/or recipe.)
>
> (But if you do need krb5...) If you import it from OpenEmbedded, something
> is
> either wrong with the krb5 recipe -- not populating the base "krb5" package
> --
> or something is wrong with the software that is requiring krb5.
>
> The first thing to do is look at the krb5 package and see if any of the
> software
> it has built belongs in a base krb5 package and isn't being properly
> installed.... fix the do_install rule to install the missing components...
>
> if there is no software to install into a krb5 package -- then it appears
> to me
> whatever is attempting to require the run-time dependency of "krb5" is
> broken.
> You should find the recipe that has the RDEPENDS and remove it -- or change
> the
> dependency to something more appropriate such a the krb5-libs.  (Note:
>  most of
> the time there is no reason to manually state a RDEPENDS on a -libs
> package,
> because the system figured out run-time library dependencies automatically
> --
> only library usages where you can't automatically detect things need
> RDEPENDS,
> this is usually the case when things are dlopened.)
>
> --Mark
>
> > Thanks & Regards,
> > Sai
> >
> >
> >
> >     On Wed, 2011-03-02 at 17:05 +0530, v sailaja wrote:
> >     > Hi Lianhao,
> >     >
> >     > There are krb5-dev-1.6.3-r6.core2.rpm and
> krb5-dbg-1.6.3-r6.core2.rpm
> >     > in
> >
>  /home/sailaja/poky-chrome/build/tmp/work/core2-poky-linux/krb5-1.6.3-r6/deploy-rpms.
> >     > But  there is no specific rpm on krb5 like  krb5-1.6.3-r6.rpm.
> >     >
> >     > Again its showing an error as follows:
> >
> >     This probably means the contents of the krb5 package was empty and it
> >     didn't build the package.
> >
> >     > I am facing the same problem with some more packages like xcb-proto
> >
> >     The contents of xcb-proto *is* empty since its just development
> headers
> >     and they end up in the xcb-proto-dev package.
> >
> >     Cheers,
> >
> >     Richard
> >
> >
> >
> >
> >
> > _______________________________________________
> > poky mailing list
> > poky@yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/poky
>
>

[-- Attachment #2: Type: text/html, Size: 4312 bytes --]

Re: got error while trying to pull the krb5 package into poky

[v sailaja]

[-- Attachment #1.1: Type: text/plain, Size: 4578 bytes --]

Hi,

I have a dependence of krb5 package, so pulled it for openembedded to poky.
While build krb5 package I got error *"Unable to find krb5 package"* , as
poky is not creating RPM package for krb5.

Here is my understanding, while starting krb5 recipe it pulls
*"krb5-1.9-signed.tar"

*After extracting *"krb5-1.9-signed.tar"  *we got two files *
"krb5-1.9.tar.gz"*  and "*krb5-1.9.tar.gz.asc"*
Then krb5 recipe  further extract *"krb5-1.9.tar.gz"*  to *"krb5-1.9"*.
Now our source and other file related to building ( i.e Makefile, configure,
etc. ) krb5 is located at *"krb5-1.9/src" *

Openembedded krb5 recipe installs this package at some unstandard locations
due to RPM file it not building.

I am also attaching recipe for krb5 with this mail, can any one help me to
resolve this issue.

Thanks & Regards
Sai



Hi  Hatle,
>
>
> I need to pull krb5 into poky. But *Krb5 rpm is not created* at the build
> time.
> its as stated below:
>
> *Not creating empty RPM package for krb5.*
>
> so that the rpm was not creating for krb5.
> Please tell me what are the dependencies and How to resolve this problem. I
> need to pull it into poky.
> Your explanation gave me an idea on krb5.
>
>
>
> Thanks & Regards,
> SAI
>
>
>
>
>
>
>
>> > Hi,
>> >
>> > I came to know with other contacts, building poky with its own krb5
>> package,
>> > there were no issues.
>> > But if we copied that krb5 package from openembedded, it showed the
>> errors.
>> > Please tell me Why is it so happening?
>> > Please help me  and fixing the problem
>>
>> AFAIK, Poky doesn't have a krb5 recipe of it's own.
>>
>> Before you dig into the krb5 package, why are you adding krb5 support to
>> your
>> device?  Is there a specific reason or did it just show up as a dependency
>> for
>> something?  (Many times on the desktop, krb5 is provided by default and
>> gets
>> linked into all sorts of things..  but in an embedded environment it's
>> rarely
>> used as there is no reason to coordinate with a kerberos server on user
>> identity.  If you decide kerberos support is NOT needed, figure out where
>> the
>> krb5 dependency is coming from and figure out if you can remove it from
>> the
>> package and/or recipe.)
>>
>> (But if you do need krb5...) If you import it from OpenEmbedded, something
>> is
>> either wrong with the krb5 recipe -- not populating the base "krb5"
>> package --
>> or something is wrong with the software that is requiring krb5.
>>
>> The first thing to do is look at the krb5 package and see if any of the
>> software
>> it has built belongs in a base krb5 package and isn't being properly
>> installed.... fix the do_install rule to install the missing components...
>>
>> if there is no software to install into a krb5 package -- then it appears
>> to me
>> whatever is attempting to require the run-time dependency of "krb5" is
>> broken.
>> You should find the recipe that has the RDEPENDS and remove it -- or
>> change the
>> dependency to something more appropriate such a the krb5-libs.  (Note:
>>  most of
>> the time there is no reason to manually state a RDEPENDS on a -libs
>> package,
>> because the system figured out run-time library dependencies automatically
>> --
>> only library usages where you can't automatically detect things need
>> RDEPENDS,
>> this is usually the case when things are dlopened.)
>>
>> --Mark
>>
>> > Thanks & Regards,
>> > Sai
>> >
>> >
>> >
>> >     On Wed, 2011-03-02 at 17:05 +0530, v sailaja wrote:
>> >     > Hi Lianhao,
>> >     >
>> >     > There are krb5-dev-1.6.3-r6.core2.rpm and
>> krb5-dbg-1.6.3-r6.core2.rpm
>> >     > in
>> >
>>  /home/sailaja/poky-chrome/build/tmp/work/core2-poky-linux/krb5-1.6.3-r6/deploy-rpms.
>> >     > But  there is no specific rpm on krb5 like  krb5-1.6.3-r6.rpm.
>> >     >
>> >     > Again its showing an error as follows:
>> >
>> >     This probably means the contents of the krb5 package was empty and
>> it
>> >     didn't build the package.
>> >
>> >     > I am facing the same problem with some more packages like
>> xcb-proto
>> >
>> >     The contents of xcb-proto *is* empty since its just development
>> headers
>> >     and they end up in the xcb-proto-dev package.
>> >
>> >     Cheers,
>> >
>> >     Richard
>> >
>> >
>> >
>> >
>> >
>> > _______________________________________________
>> > poky mailing list
>> > poky@yoctoproject.org
>> > https://lists.yoctoproject.org/listinfo/poky
>>
>>
>


-- 
Thanks & Regards,
SAI

[-- Attachment #1.2: Type: text/html, Size: 5611 bytes --]

[-- Attachment #2: krb5_1.6.3.bb --]
[-- Type: application/octet-stream, Size: 3127 bytes --]

DESCRIPTION = "A network authentication protocol"
HOMEPAGE = "http://web.mit.edu/Kerberos/"
SECTION = "console/network"
PR = "r6"
LICENSE = "MIT"
DEPENDS = "perl-native ncurses util-linux-ng e2fsprogs-native"

inherit autotools binconfig

#SRC_URI = "git://git.srobo.org/~jmorse/kerberos.git \
SRC_URI = "http://web.mit.edu/kerberos/dist/krb5/1.6/krb5-1.6.3-signed.tar \
           file://fix-uclibc-ruserpass-collision.patch;apply=no \
           file://copyperms.patch;apply=no"

S = "${workdir}/${PN}-${PV}/src/"

# Will clean this up...
EXTRA_OECONF += " --without-tcl krb5_cv_attr_constructor_destructor=yes ac_cv_func_regcomp=yes \
                  ac_cv_printf_positional=yes ac_cv_file__etc_environment=yes \
                  ac_cv_file__etc_TIMEZONE=no --with-system-et"
CFLAGS_append += "-DDESTRUCTOR_ATTR_WORKS=1 -I${staging_incdir}/et"
LDFLAGS_append += "-lpthread"

FILES_${PN}-doc += /usr/share/examples

krb5_do_unpack() {
	tar xzf ${workdir}/krb5-1.6.3.tar.gz -C ${workdir}/
	patch -d ${S} -p1 < ${workdir}/fix-uclibc-ruserpass-collision.patch
	patch -d ${S} -p1 < ${workdir}/copyperms.patch
}

python do_unpack() {
	bb.build.exec_func('base_do_unpack', d)
	bb.build.exec_func('krb5_do_unpack', d)
}

do_configure() {
	oe_runconf
}


do_install() {
	oe_libinstall -so -C util/support libkrb5support ${staging_libdir}
	oe_libinstall -so -C util/et libcom_err ${staging_libdir}
	oe_libinstall -so -C lib/crypto libk5crypto ${staging_libdir}
	oe_libinstall -so -C lib/krb5 libkrb5 ${staging_libdir}
	oe_libinstall -so -C lib/des425 libdes425 ${staging_libdir}
	oe_libinstall -so -C lib/krb4 libkrb4 ${staging_libdir}
	oe_libinstall -so -C lib/gssapi libgssapi_krb5 ${staging_libdir}
	oe_libinstall -so -C lib/rpc libgssrpc ${staging_libdir}
	oe_libinstall -so -C lib/kdb libkdb5 ${staging_libdir}
	oe_libinstall -so -C lib/kadm5/clnt libkadm5clnt ${staging_libdir}
	oe_libinstall -so -C lib/kadm5/srv libkadm5srv ${staging_libdir}

	install -d ${staging_incdir}/krb5
	for X in krb5.h locate_plugin.h
	do
		install -m 0644 ${S}/include/krb5/$X ${staging_incdir}/krb5/$X
	done

	install -d ${staging_incdir}/gssapi
	for X in gssapi_generic.h gssapi.h gssapi_krb5.h
	do
		install -m 0644 ${S}/include/gssapi/$X ${staging_incdir}/gssapi/$X
	done
	install -m 0644 ${S}/lib/gssapi/mechglue/mechglue.h ${staging_incdir}/gssapi/mechglue.h

	install -d ${staging_incdir}/kerberosIV
	for X in krb.h des.h mit-copyright.h krb_err.h kadm_err.h
	do
		install -m 0644 ${S}/include/kerberosIV/$X ${staging_incdir}/kerberosIV/$X
	done

	install -d ${staging_incdir}/gssrpc
	for X in auth.h auth_gss.h auth_gssapi.h auth_unix.h clnt.h netdb.h pmap_clnt.h pmap_prot.h pmap_rmt.h rename.h rpc.h rpc_msg.h svc.h svc_auth.h xdr.h types.h
	do
		install -m 0644 ${S}/include/gssrpc/$X ${staging_incdir}/gssrpc/$X
	done

	# com_err.h needs to be added here if you choose to use this builtin
	for X in krb5.h profile.h gssapi.h
	do
		install -m 0644 ${S}/include/$X ${staging_incdir}/$X
	done
}

SRC_URI[md5sum] = "2dc1307686eb1c2bf1ab08ea805dad46"
SRC_URI[sha256sum] = "7a1bd7d4bd326828c8ee382ed2b69ccd6c58762601df897d6a32169d84583d2a"

Re: got error while trying to pull the krb5 package into poky

[embedded.yogesh]

[-- Attachment #1: Type: text/plain, Size: 5727 bytes --]

Hi,

I am also getting the same problem.
As per my understanding openembedded recipe should work on poky, but it 
not happening.
Can some one guide how to deal with it.

Thanks
Yogesh

On Wednesday 09 March 2011 10:29 AM, v sailaja wrote:
> Hi,
>
> I have a dependence of krb5 package, so pulled it for openembedded to 
> poky.
> While build krb5 package I got error /"Unable to find krb5 package"/ , 
> as poky is not creating RPM package for krb5.
>
> Here is my understanding, while starting krb5 recipe it pulls 
> /"krb5-1.9-signed.tar"
> /After extracting /"krb5-1.9-signed.tar" /we got two files 
> /"krb5-1.9.tar.gz"/  and "/krb5-1.9.tar.gz.asc"/
> Then krb5 recipe  further extract /"krb5-1.9.tar.gz"/  to /"krb5-1.9"/.
> Now our source and other file related to building ( i.e Makefile, 
> configure, etc. ) krb5 is located at /"krb5-1.9/src" /
>
> Openembedded krb5 recipe installs this package at some unstandard 
> locations due to RPM file it not building.
>
> I am also attaching recipe for krb5 with this mail, can any one help 
> me to resolve this issue.
>
> Thanks & Regards
> Sai
>
>
>
>     Hi  Hatle,
>
>
>     I need to pull krb5 into poky. But *Krb5 rpm is not created* at
>     the build time.
>     its as stated below:
>
>     *Not creating empty RPM package for krb5.*
>
>     so that the rpm was not creating for krb5.
>     Please tell me what are the dependencies and How to resolve this
>     problem. I need to pull it into poky.
>     Your explanation gave me an idea on krb5.
>
>
>
>     Thanks & Regards,
>     SAI
>
>
>
>
>
>         > Hi,
>         >
>         > I came to know with other contacts, building poky with its
>         own krb5 package,
>         > there were no issues.
>         > But if we copied that krb5 package from openembedded, it
>         showed the errors.
>         > Please tell me Why is it so happening?
>         > Please help me  and fixing the problem
>
>         AFAIK, Poky doesn't have a krb5 recipe of it's own.
>
>         Before you dig into the krb5 package, why are you adding krb5
>         support to your
>         device?  Is there a specific reason or did it just show up as
>         a dependency for
>         something?  (Many times on the desktop, krb5 is provided by
>         default and gets
>         linked into all sorts of things..  but in an embedded
>         environment it's rarely
>         used as there is no reason to coordinate with a kerberos
>         server on user
>         identity.  If you decide kerberos support is NOT needed,
>         figure out where the
>         krb5 dependency is coming from and figure out if you can
>         remove it from the
>         package and/or recipe.)
>
>         (But if you do need krb5...) If you import it from
>         OpenEmbedded, something is
>         either wrong with the krb5 recipe -- not populating the base
>         "krb5" package --
>         or something is wrong with the software that is requiring krb5.
>
>         The first thing to do is look at the krb5 package and see if
>         any of the software
>         it has built belongs in a base krb5 package and isn't being
>         properly
>         installed.... fix the do_install rule to install the missing
>         components...
>
>         if there is no software to install into a krb5 package -- then
>         it appears to me
>         whatever is attempting to require the run-time dependency of
>         "krb5" is broken.
>         You should find the recipe that has the RDEPENDS and remove it
>         -- or change the
>         dependency to something more appropriate such a the krb5-libs.
>          (Note:  most of
>         the time there is no reason to manually state a RDEPENDS on a
>         -libs package,
>         because the system figured out run-time library dependencies
>         automatically --
>         only library usages where you can't automatically detect
>         things need RDEPENDS,
>         this is usually the case when things are dlopened.)
>
>         --Mark
>
>         > Thanks & Regards,
>         > Sai
>         >
>         >
>         >
>         >     On Wed, 2011-03-02 at 17:05 +0530, v sailaja wrote:
>         > > Hi Lianhao,
>         > >
>         > > There are krb5-dev-1.6.3-r6.core2.rpm and
>         krb5-dbg-1.6.3-r6.core2.rpm
>         > > in
>         >    
>          /home/sailaja/poky-chrome/build/tmp/work/core2-poky-linux/krb5-1.6.3-r6/deploy-rpms.
>         > > But  there is no specific rpm on krb5 like  krb5-1.6.3-r6.rpm.
>         > >
>         > > Again its showing an error as follows:
>         >
>         >     This probably means the contents of the krb5 package was
>         empty and it
>         >     didn't build the package.
>         >
>         > > I am facing the same problem with some more packages like
>         xcb-proto
>         >
>         >     The contents of xcb-proto *is* empty since its just
>         development headers
>         >     and they end up in the xcb-proto-dev package.
>         >
>         >     Cheers,
>         >
>         >     Richard
>         >
>         >
>         >
>         >
>         >
>         > _______________________________________________
>         > poky mailing list
>         > poky@yoctoproject.org <mailto:poky@yoctoproject.org>
>         > https://lists.yoctoproject.org/listinfo/poky
>
>
>
>
>
> -- 
> Thanks & Regards,
> SAI
>
>
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky


[-- Attachment #2: Type: text/html, Size: 9951 bytes --]