From: mkl@pengutronix.de (Marc Kleine-Budde)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/7] da850: pruss board specific additions.
Date: Wed, 09 Mar 2011 12:59:41 +0100 [thread overview]
Message-ID: <4D776BAD.1020307@pengutronix.de> (raw)
In-Reply-To: <1299592667-21367-4-git-send-email-subhasish@mistralsolutions.com>
On 03/08/2011 02:57 PM, Subhasish Ghosh wrote:
> This patch adds board specific initializations and setup routines.
>
> Signed-off-by: Subhasish Ghosh <subhasish@mistralsolutions.com>
> ---
> arch/arm/mach-davinci/board-da850-evm.c | 25 +++++++++++++++++++++++++
> 1 files changed, 25 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
> index 11f986b..c614c82 100644
> --- a/arch/arm/mach-davinci/board-da850-evm.c
> +++ b/arch/arm/mach-davinci/board-da850-evm.c
> @@ -1053,6 +1053,26 @@ static __init int da850_evm_init_cpufreq(void)
> static __init int da850_evm_init_cpufreq(void) { return 0; }
> #endif
>
> +static struct da8xx_pruss_devices pruss_devices[] = {
> + {.dev_name = NULL,},
> +};
> +
> +static int __init da8xx_evm_setup_pruss(void)
> +{
> + u32 ret = 0;
your functions returns an int, not an u32
> + u32 count;
use "int i" for loop counter.
> +
> + for (count = 0; count < ARRAY_SIZE(pruss_devices); count++) {
> + if (pruss_devices[count].setup != NULL) {
you may omit the "!= NULL"
> + ret = pruss_devices[count].setup();
> + if (ret)
> + return ret;
in case of an error you don't clean up correct
> + }
> + }
> +
> + return da8xx_register_pruss_mfd(pruss_devices);
> +}
> +
> static __init void da850_evm_init(void)
> {
> int ret;
> @@ -1127,6 +1147,11 @@ static __init void da850_evm_init(void)
>
> da8xx_register_mcasp(0, &da850_evm_snd_data);
>
> + ret = da8xx_evm_setup_pruss();
> + if (ret)
> + pr_warning("%s: pruss initialization failed: %d\n",
> + __func__, ret);
> +
> ret = davinci_cfg_reg_list(da850_lcdcntl_pins);
> if (ret)
> pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 262 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20110309/9b942493/attachment.sig>
WARNING: multiple messages have this Message-ID (diff)
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Subhasish Ghosh <subhasish@mistralsolutions.com>
Cc: davinci-linux-open-source@linux.davincidsp.com,
Kevin Hilman <khilman@ti.com>,
sachi@mistralsolutions.com, Russell King <linux@arm.linux.org.uk>,
nsekhar@ti.com, open list <linux-kernel@vger.kernel.org>,
m-watkins@ti.com, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 3/7] da850: pruss board specific additions.
Date: Wed, 09 Mar 2011 12:59:41 +0100 [thread overview]
Message-ID: <4D776BAD.1020307@pengutronix.de> (raw)
In-Reply-To: <1299592667-21367-4-git-send-email-subhasish@mistralsolutions.com>
[-- Attachment #1: Type: text/plain, Size: 2086 bytes --]
On 03/08/2011 02:57 PM, Subhasish Ghosh wrote:
> This patch adds board specific initializations and setup routines.
>
> Signed-off-by: Subhasish Ghosh <subhasish@mistralsolutions.com>
> ---
> arch/arm/mach-davinci/board-da850-evm.c | 25 +++++++++++++++++++++++++
> 1 files changed, 25 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
> index 11f986b..c614c82 100644
> --- a/arch/arm/mach-davinci/board-da850-evm.c
> +++ b/arch/arm/mach-davinci/board-da850-evm.c
> @@ -1053,6 +1053,26 @@ static __init int da850_evm_init_cpufreq(void)
> static __init int da850_evm_init_cpufreq(void) { return 0; }
> #endif
>
> +static struct da8xx_pruss_devices pruss_devices[] = {
> + {.dev_name = NULL,},
> +};
> +
> +static int __init da8xx_evm_setup_pruss(void)
> +{
> + u32 ret = 0;
your functions returns an int, not an u32
> + u32 count;
use "int i" for loop counter.
> +
> + for (count = 0; count < ARRAY_SIZE(pruss_devices); count++) {
> + if (pruss_devices[count].setup != NULL) {
you may omit the "!= NULL"
> + ret = pruss_devices[count].setup();
> + if (ret)
> + return ret;
in case of an error you don't clean up correct
> + }
> + }
> +
> + return da8xx_register_pruss_mfd(pruss_devices);
> +}
> +
> static __init void da850_evm_init(void)
> {
> int ret;
> @@ -1127,6 +1147,11 @@ static __init void da850_evm_init(void)
>
> da8xx_register_mcasp(0, &da850_evm_snd_data);
>
> + ret = da8xx_evm_setup_pruss();
> + if (ret)
> + pr_warning("%s: pruss initialization failed: %d\n",
> + __func__, ret);
> +
> ret = davinci_cfg_reg_list(da850_lcdcntl_pins);
> if (ret)
> pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]
next prev parent reply other threads:[~2011-03-09 11:59 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-08 13:57 [PATCH v3 0/7] pruss mfd drivers Subhasish Ghosh
2011-03-08 13:57 ` [PATCH v3 1/7] mfd: add pruss mfd driver Subhasish Ghosh
2011-03-08 13:57 ` Subhasish Ghosh
2011-03-09 11:56 ` Marc Kleine-Budde
2011-03-09 11:56 ` Marc Kleine-Budde
2011-03-24 13:16 ` Subhasish Ghosh
2011-03-24 13:16 ` Subhasish Ghosh
2011-03-24 13:24 ` Marc Kleine-Budde
2011-03-24 13:24 ` Marc Kleine-Budde
2011-03-24 13:41 ` Kurt Van Dijck
2011-03-24 13:41 ` Kurt Van Dijck
2011-03-11 15:28 ` Arnd Bergmann
2011-03-11 15:28 ` Arnd Bergmann
2011-03-30 7:16 ` Subhasish Ghosh
2011-03-30 7:16 ` Subhasish Ghosh
2011-03-30 10:59 ` Arnd Bergmann
2011-03-30 10:59 ` Arnd Bergmann
2011-04-05 6:40 ` Subhasish Ghosh
2011-04-05 6:40 ` Subhasish Ghosh
2011-03-30 9:15 ` Subhasish Ghosh
2011-03-30 9:15 ` Subhasish Ghosh
2011-03-30 11:38 ` Arnd Bergmann
2011-03-30 11:38 ` Arnd Bergmann
2011-03-18 11:59 ` Nori, Sekhar
2011-03-18 11:59 ` Nori, Sekhar
2011-03-18 12:39 ` Mark Brown
2011-03-18 12:39 ` Mark Brown
2011-03-22 9:35 ` Nori, Sekhar
2011-03-22 9:35 ` Nori, Sekhar
2011-03-22 9:43 ` Nori, Sekhar
2011-03-22 9:43 ` Nori, Sekhar
2011-03-22 16:52 ` Mark Brown
2011-03-22 16:52 ` Mark Brown
2011-03-08 13:57 ` [PATCH v3 2/7] da850: pruss platform specific additions Subhasish Ghosh
2011-03-08 13:57 ` Subhasish Ghosh
2011-03-08 15:17 ` Sergei Shtylyov
2011-03-08 15:17 ` Sergei Shtylyov
2011-03-08 13:57 ` [PATCH v3 3/7] da850: pruss board " Subhasish Ghosh
2011-03-08 13:57 ` Subhasish Ghosh
2011-03-08 15:19 ` Sergei Shtylyov
2011-03-08 15:19 ` Sergei Shtylyov
2011-03-09 4:29 ` Subhasish Ghosh
2011-03-09 4:29 ` Subhasish Ghosh
2011-03-09 11:59 ` Marc Kleine-Budde [this message]
2011-03-09 11:59 ` Marc Kleine-Budde
2011-03-08 13:57 ` [PATCH v3 4/7] mfd: pruss SUART private data Subhasish Ghosh
2011-03-08 13:57 ` Subhasish Ghosh
2011-03-08 13:57 ` [PATCH v3 5/7] da850: pruss SUART board specific additions Subhasish Ghosh
2011-03-08 13:57 ` Subhasish Ghosh
2011-03-08 13:57 ` [PATCH v3 6/7] da850: pruss SUART platform " Subhasish Ghosh
2011-03-08 13:57 ` Subhasish Ghosh
2011-03-08 13:57 ` [PATCH v3 7/7] tty: add pruss SUART driver Subhasish Ghosh
2011-03-08 13:57 ` Subhasish Ghosh
2011-03-08 18:47 ` Randy Dunlap
2011-03-08 18:47 ` Randy Dunlap
2011-03-15 7:23 ` Subhasish Ghosh
2011-03-15 7:23 ` Subhasish Ghosh
2011-03-18 5:43 ` Subhasish Ghosh
2011-03-18 5:43 ` Subhasish Ghosh
2011-03-18 11:45 ` Alan Cox
2011-03-18 11:45 ` Alan Cox
2011-03-18 12:07 ` Arnd Bergmann
2011-03-18 12:07 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D776BAD.1020307@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.