* [U-Boot] [GIT PULL] Pull request: u-boot-imx
@ 2011-04-22 12:50 Stefano Babic
2011-04-22 17:48 ` [U-Boot] [GIT PULL] Pull request: u-boot-imx -- all ARM custodians please read Albert ARIBAUD
0 siblings, 1 reply; 2+ messages in thread
From: Stefano Babic @ 2011-04-22 12:50 UTC (permalink / raw)
To: u-boot
Hi Albert,
my new pull request. Take care that I drop patches for the MX53 LOCO
board as discussed on the mailing list (they were part of last pull
request, commit 96c1b214b47416ae07aac267e45a600cc9567eed in uboot-arm).
This pull is against u-boot tree, as after dropping the patches I
rebased on it.
The following changes since commit 735eb0f0e66b544b1dfaf6c43ce6e4bd9ae64b5e:
tools/env: fix redundant env flag comparison (2011-04-21 00:25:08 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (5):
mx25: Make the UART port number explicit in its setup function
ARM: mx31: Print the silicon version
MX31: Introduce get_reset_cause()
MX31: mx31pdk: Make the board name simpler.
ARM: MX31: Fix file name label
Jason Liu (1):
MX5: factor out boot cause funciton to common code
Liu Hui-R64343 (2):
MX53: drop config.mk from mx53evk
MX5: Enable flat-device-tree support on mx51/53 evk board
Stefano Babic (6):
Makefile: change rule to build IMX image
MX51: drop config.mk from mx51evk
MX31: add support for MX31 watchdog
MX31: qong: add watchdog
IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers
MX31: drop warnings in get_cpu_rev
Makefile | 2 +-
arch/arm/cpu/arm1136/mx31/devices.c | 4 +-
arch/arm/cpu/arm1136/mx31/generic.c | 59
+++++++++++++++++++-
arch/arm/cpu/arm1136/mx31/timer.c | 40 +++++++++++++-
arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
arch/arm/cpu/armv7/mx5/soc.c | 28 +++++++++
arch/arm/include/asm/arch-mx31/{mx31.h => clock.h} | 6 +-
.../asm/arch-mx31/{mx31-regs.h => imx-regs.h} | 41 +++++++++++++-
board/davedenx/qong/fpga.c | 4 +-
board/davedenx/qong/lowlevel_init.S | 2 +-
board/davedenx/qong/qong.c | 16 +++++-
board/freescale/mx31ads/lowlevel_init.S | 2 +-
board/freescale/mx31ads/mx31ads.c | 4 +-
board/freescale/mx31pdk/lowlevel_init.S | 2 +-
board/freescale/mx31pdk/mx31pdk.c | 6 +-
board/freescale/mx51evk/config.mk | 25 --------
board/freescale/mx53evk/config.mk | 24 --------
board/imx31_phycore/imx31_phycore.c | 4 +-
board/imx31_phycore/lowlevel_init.S | 2 +-
board/karo/tx25/tx25.c | 4 +-
board/logicpd/imx31_litekit/imx31_litekit.c | 4 +-
board/logicpd/imx31_litekit/lowlevel_init.S | 2 +-
boards.cfg | 4 +-
drivers/gpio/mxc_gpio.c | 5 --
drivers/i2c/mxc_i2c.c | 7 +--
drivers/serial/serial_mxc.c | 4 -
drivers/spi/mxc_spi.c | 9 +--
drivers/usb/host/ehci-mxc.c | 2 +-
drivers/video/mx3fb.c | 6 +-
include/configs/imx31_litekit.h | 2 +-
include/configs/mx31ads.h | 2 +-
include/configs/mx31pdk.h | 2 +-
include/configs/mx51evk.h | 5 ++
include/configs/mx53evk.h | 3 +
include/configs/qong.h | 3 +-
nand_spl/nand_boot_fsl_nfc.c | 4 -
36 files changed, 221 insertions(+), 120 deletions(-)
rename arch/arm/include/asm/arch-mx31/{mx31.h => clock.h} (92%)
rename arch/arm/include/asm/arch-mx31/{mx31-regs.h => imx-regs.h} (97%)
delete mode 100644 board/freescale/mx51evk/config.mk
delete mode 100644 board/freescale/mx53evk/config.mk
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] [GIT PULL] Pull request: u-boot-imx -- all ARM custodians please read
2011-04-22 12:50 [U-Boot] [GIT PULL] Pull request: u-boot-imx Stefano Babic
@ 2011-04-22 17:48 ` Albert ARIBAUD
0 siblings, 0 replies; 2+ messages in thread
From: Albert ARIBAUD @ 2011-04-22 17:48 UTC (permalink / raw)
To: u-boot
Le 22/04/2011 14:50, Stefano Babic a ?crit :
> Hi Albert,
>
> my new pull request. Take care that I drop patches for the MX53 LOCO
> board as discussed on the mailing list (they were part of last pull
> request, commit 96c1b214b47416ae07aac267e45a600cc9567eed in uboot-arm).
> This pull is against u-boot tree, as after dropping the patches I
> rebased on it.
>
> The following changes since commit 735eb0f0e66b544b1dfaf6c43ce6e4bd9ae64b5e:
>
> tools/env: fix redundant env flag comparison (2011-04-21 00:25:08 +0200)
>
> are available in the git repository at:
> git://www.denx.de/git/u-boot-imx.git master
>
> Fabio Estevam (5):
> mx25: Make the UART port number explicit in its setup function
> ARM: mx31: Print the silicon version
> MX31: Introduce get_reset_cause()
> MX31: mx31pdk: Make the board name simpler.
> ARM: MX31: Fix file name label
>
> Jason Liu (1):
> MX5: factor out boot cause funciton to common code
>
> Liu Hui-R64343 (2):
> MX53: drop config.mk from mx53evk
> MX5: Enable flat-device-tree support on mx51/53 evk board
>
> Stefano Babic (6):
> Makefile: change rule to build IMX image
> MX51: drop config.mk from mx51evk
> MX31: add support for MX31 watchdog
> MX31: qong: add watchdog
> IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers
> MX31: drop warnings in get_cpu_rev
>
> Makefile | 2 +-
> arch/arm/cpu/arm1136/mx31/devices.c | 4 +-
> arch/arm/cpu/arm1136/mx31/generic.c | 59
> +++++++++++++++++++-
> arch/arm/cpu/arm1136/mx31/timer.c | 40 +++++++++++++-
> arch/arm/cpu/arm926ejs/mx25/generic.c | 2 +-
> arch/arm/cpu/armv7/mx5/soc.c | 28 +++++++++
> arch/arm/include/asm/arch-mx31/{mx31.h => clock.h} | 6 +-
> .../asm/arch-mx31/{mx31-regs.h => imx-regs.h} | 41 +++++++++++++-
> board/davedenx/qong/fpga.c | 4 +-
> board/davedenx/qong/lowlevel_init.S | 2 +-
> board/davedenx/qong/qong.c | 16 +++++-
> board/freescale/mx31ads/lowlevel_init.S | 2 +-
> board/freescale/mx31ads/mx31ads.c | 4 +-
> board/freescale/mx31pdk/lowlevel_init.S | 2 +-
> board/freescale/mx31pdk/mx31pdk.c | 6 +-
> board/freescale/mx51evk/config.mk | 25 --------
> board/freescale/mx53evk/config.mk | 24 --------
> board/imx31_phycore/imx31_phycore.c | 4 +-
> board/imx31_phycore/lowlevel_init.S | 2 +-
> board/karo/tx25/tx25.c | 4 +-
> board/logicpd/imx31_litekit/imx31_litekit.c | 4 +-
> board/logicpd/imx31_litekit/lowlevel_init.S | 2 +-
> boards.cfg | 4 +-
> drivers/gpio/mxc_gpio.c | 5 --
> drivers/i2c/mxc_i2c.c | 7 +--
> drivers/serial/serial_mxc.c | 4 -
> drivers/spi/mxc_spi.c | 9 +--
> drivers/usb/host/ehci-mxc.c | 2 +-
> drivers/video/mx3fb.c | 6 +-
> include/configs/imx31_litekit.h | 2 +-
> include/configs/mx31ads.h | 2 +-
> include/configs/mx31pdk.h | 2 +-
> include/configs/mx51evk.h | 5 ++
> include/configs/mx53evk.h | 3 +
> include/configs/qong.h | 3 +-
> nand_spl/nand_boot_fsl_nfc.c | 4 -
> 36 files changed, 221 insertions(+), 120 deletions(-)
> rename arch/arm/include/asm/arch-mx31/{mx31.h => clock.h} (92%)
> rename arch/arm/include/asm/arch-mx31/{mx31-regs.h => imx-regs.h} (97%)
> delete mode 100644 board/freescale/mx51evk/config.mk
> delete mode 100644 board/freescale/mx53evk/config.mk
This is causing a forced rebase on u-boot-arm/master of course.
ARM Custodians who already had a pull request acknowledged please check
that I have not accidentally dropped any of the commits you had
requested a pull for. Currently, above u-boot/master I have the following:
Albert ARIBAUD (1):
Replace obsolete e-mail address
Alexander Holler (4):
omap3_beagle: enable the use of a plain text file
OMAP3: Change some USB related MUX values
OMAP3: Add support for DPLL5 (usbhost)
omap3_beagle: enable EHCI and USB storage.
Enric Balletbo i Serra (2):
ARM: OMAP3: Revamp IGEP v2 default
ARM: OMAP3: Revamp IGEP module default configuration
Eric Cooper (1):
ARM: fix stack pointer adjustment in board_init_f()
Fabio Estevam (6):
mx25: Make the UART port number explicit in its setup function
ARM: mx31: Print the silicon version
MX31: Introduce get_reset_cause()
MX31: mx31pdk: Make the board name simpler.
ARM: MX31: Fix file name label
MX25: tx25: Add _end section on nand_spl
Igor Grinberg (9):
OMAP3: CM-T35: Move DECLARE_GLOBAL_DATA_PTR to file scope
OMAP3: CM-T35: update config
OMAP3: CM-T35: update board files header information
OMAP3: CM-T35: update MAINTAINERS file
OMAP3: CM-T35: add MMC1 pinmux
OMAP3: CM-T35: fix mmc
OMAP3: CM-T35: remove redundand i2c initialization
OMAP3: CM-T35: enable the green LED
OMAP3: CM-T35: Add support for CM-T3730
Jason Kridner (2):
Add 'led' command
BeagleBoard: Added LED driver
Jason Liu (1):
MX5: factor out boot cause funciton to common code
Koen Kooi (2):
OMAP3: BeagleBoard: add xM rev B to ID table
OMAP3: BeagleBoard: add more expansionboard IDs
Lei Wen (6):
pxa: move i2c driver to the common place
mv_i2c: fix timeout value to be consistent with comments
mv_i2c: use structure to replace the direclty define
I2C: add i2c support for Pantheon platform
I2C: mv_i2c: add multi bus support
I2C: add i2c support for Armada100 platform
Liu Hui-R64343 (2):
MX53: drop config.mk from mx53evk
MX5: Enable flat-device-tree support on mx51/53 evk board
Luca Ceresoli (4):
ARMV7: OMAP3: Fix preprocessor check for CONFIG_OMAP34XX
ARMV7: OMAP3: Add GPMC_CONFIGx register value definitions
ARMV7: OMAP3: Cleanup extern variables in mem.c
ARMV7: OMAP3: Add support for Comelit DIG297 board
Macpaul Lin (4):
ftpmu010: fix relocation and enhance features
ftpmu010.h: add asm support used by lowlevel_init
fttmr010: move fttmr010 header to include/faraday
a320evb: fix include path of timer fttmr010
Matt Waddel (1):
ARMV7: Vexpress: Remove config.mk
Matthias Weisser (1):
arm: Use optimized memcpy and memset from linux
Minkyu Kang (1):
Don't grab memory for LCD if FB address is defined
Po-Yu Chuang (2):
power: ftpmu010: move drivers/power/ftpmu010.h to include/faraday
arm: a320: use new ftpmu010 API
Rogan Dawes (1):
Orion5x: Correct DRAM bank detection
Srinath (1):
ARMV7: AM3517/05: Add support for CraneBoard.
Stefano Babic (7):
Makefile: change rule to build IMX image
MX51: drop config.mk from mx51evk
MX31: add support for MX31 watchdog
MX31: qong: add watchdog
IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers
MX31: drop warnings in get_cpu_rev
MX31: mx31pdk: fix nand_spl
Steve Kipisz (1):
OMAP3: BeagleBoard: Enable pullups on i2c2.
Sughosh Ganu (1):
Fix the issue of _end symbol not being found while building
Tom Warren (4):
arm: Tegra2: add support for A9 CPU init
arm: Tegra2: Add missing PLLX init
arm: Tegra2: GPIO: Add basic GPIO definitions
arm: Tegra2: Move clk/mux init to board_early_init_f, add GPIO init
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-04-22 17:48 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-04-22 12:50 [U-Boot] [GIT PULL] Pull request: u-boot-imx Stefano Babic
2011-04-22 17:48 ` [U-Boot] [GIT PULL] Pull request: u-boot-imx -- all ARM custodians please read Albert ARIBAUD
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.