[U-Boot] [GIT PULL] Pull request: u-boot-imx

[Stefano Babic <sbabic@denx.de>]

Hi Albert,

my new pull request. Take care that I drop patches for the MX53 LOCO
board as discussed on the mailing list (they were part of last pull
request, commit 96c1b214b47416ae07aac267e45a600cc9567eed in uboot-arm).
This pull is against u-boot tree, as after dropping the patches I
rebased on it.

The following changes since commit 735eb0f0e66b544b1dfaf6c43ce6e4bd9ae64b5e:

  tools/env: fix redundant env flag comparison (2011-04-21 00:25:08 +0200)

are available in the git repository at:
  git://www.denx.de/git/u-boot-imx.git master

Fabio Estevam (5):
      mx25: Make the UART port number explicit in its setup function
      ARM: mx31: Print the silicon version
      MX31: Introduce get_reset_cause()
      MX31: mx31pdk: Make the board name simpler.
      ARM: MX31: Fix file name label

Jason Liu (1):
      MX5: factor out boot cause funciton to common code

Liu Hui-R64343 (2):
      MX53: drop config.mk from mx53evk
      MX5: Enable flat-device-tree support on mx51/53 evk board

Stefano Babic (6):
      Makefile: change rule to build IMX image
      MX51: drop config.mk from mx51evk
      MX31: add support for MX31 watchdog
      MX31: qong: add watchdog
      IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers
      MX31: drop warnings in get_cpu_rev

 Makefile                                           |    2 +-
 arch/arm/cpu/arm1136/mx31/devices.c                |    4 +-
 arch/arm/cpu/arm1136/mx31/generic.c                |   59
+++++++++++++++++++-
 arch/arm/cpu/arm1136/mx31/timer.c                  |   40 +++++++++++++-
 arch/arm/cpu/arm926ejs/mx25/generic.c              |    2 +-
 arch/arm/cpu/armv7/mx5/soc.c                       |   28 +++++++++
 arch/arm/include/asm/arch-mx31/{mx31.h => clock.h} |    6 +-
 .../asm/arch-mx31/{mx31-regs.h => imx-regs.h}      |   41 +++++++++++++-
 board/davedenx/qong/fpga.c                         |    4 +-
 board/davedenx/qong/lowlevel_init.S                |    2 +-
 board/davedenx/qong/qong.c                         |   16 +++++-
 board/freescale/mx31ads/lowlevel_init.S            |    2 +-
 board/freescale/mx31ads/mx31ads.c                  |    4 +-
 board/freescale/mx31pdk/lowlevel_init.S            |    2 +-
 board/freescale/mx31pdk/mx31pdk.c                  |    6 +-
 board/freescale/mx51evk/config.mk                  |   25 --------
 board/freescale/mx53evk/config.mk                  |   24 --------
 board/imx31_phycore/imx31_phycore.c                |    4 +-
 board/imx31_phycore/lowlevel_init.S                |    2 +-
 board/karo/tx25/tx25.c                             |    4 +-
 board/logicpd/imx31_litekit/imx31_litekit.c        |    4 +-
 board/logicpd/imx31_litekit/lowlevel_init.S        |    2 +-
 boards.cfg                                         |    4 +-
 drivers/gpio/mxc_gpio.c                            |    5 --
 drivers/i2c/mxc_i2c.c                              |    7 +--
 drivers/serial/serial_mxc.c                        |    4 -
 drivers/spi/mxc_spi.c                              |    9 +--
 drivers/usb/host/ehci-mxc.c                        |    2 +-
 drivers/video/mx3fb.c                              |    6 +-
 include/configs/imx31_litekit.h                    |    2 +-
 include/configs/mx31ads.h                          |    2 +-
 include/configs/mx31pdk.h                          |    2 +-
 include/configs/mx51evk.h                          |    5 ++
 include/configs/mx53evk.h                          |    3 +
 include/configs/qong.h                             |    3 +-
 nand_spl/nand_boot_fsl_nfc.c                       |    4 -
 36 files changed, 221 insertions(+), 120 deletions(-)
 rename arch/arm/include/asm/arch-mx31/{mx31.h => clock.h} (92%)
 rename arch/arm/include/asm/arch-mx31/{mx31-regs.h => imx-regs.h} (97%)
 delete mode 100644 board/freescale/mx51evk/config.mk
 delete mode 100644 board/freescale/mx53evk/config.mk


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================