[U-Boot] [GIT PULL] Pull request: u-boot-imx

[Albert ARIBAUD <albert.u.boot@aribaud.net>]

Hi Stefano,

Le 12/02/2012 17:06, Stefano Babic a ?crit :
> Hi Albert,
>
> please pull from u-boot-imx.
>
> The following changes since commit 9a3aae22edf1eda6326cc51c28631ca5c23b7706:
>
>    arm, davinci: Add support for the Calimain board from OMICRON
> electronics (2012-02-12 10:11:33 +0100)
>
> are available in the git repository at:
>    git://www.denx.de/git/u-boot-imx.git master
>
> Eric Nelson (6):
>        mx6q: define GPIO macros for translating between ordinals and
> port:index
>        mxc_spi: move machine specifics into CPU headers
>        mx6q: Add support for ECSPI through mxc_spi driver
>        mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
>        mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
>        mx6q: mx6qsabrelite: Conditionally define macros for environment
> in serial flash
>
> Fabio Estevam (7):
>        mx53loco: Use gpio_direction_input prior to gpio_get_value
>        mx53ard: Use gpio_direction_input prior to gpio_get_value
>        mx53evk: Use gpio_direction_input prior to gpio_get_value
>        mx53smd: Use gpio_direction_input prior to gpio_get_value
>        mx51evk: Use gpio_direction_input prior to gpio_get_value
>        mx35: generic: Let get_reset_cause be defined only when
> CONFIG_DISPLAY_CPUINFO is selected
>        mx35pdk: Remove duplicate CPU revision and reset cause information
>
> Marek Vasut (2):
>        i.MX28: Fix VDDIO and VDDA setup
>        MX28: Fix get_timer() / get_tbclk() issue
>
> Matthias Fuchs (4):
>        mx28evk: add RTC support
>        mx28evk: add USB support
>        mx28evk: add SPI support
>        mx28: fix SPL code to make USB booting work
>
> Shawn Guo (1):
>        common/image.c: align usage of fdt_high with initrd_high
>
> Stefano Babic (4):
>        MX35: add missing get_ticks() and get_tbclk()
>        MX31: add missing get_tbclk()
>        MX5/MX6: add missing get_ticks() and get_tbclk()
>        MX27: add missing get_tbclk()
>
>   README                                        |    8 ++
>   arch/arm/cpu/arm1136/mx31/timer.c             |    9 ++
>   arch/arm/cpu/arm1136/mx35/generic.c           |    2 +-
>   arch/arm/cpu/arm1136/mx35/timer.c             |  103
> +++++++++++++++---------
>   arch/arm/cpu/arm926ejs/mx27/timer.c           |    5 +
>   arch/arm/cpu/arm926ejs/mx28/spl_power_init.c  |   16 +++-
>   arch/arm/cpu/arm926ejs/mx28/start.S           |   21 +++++-
>   arch/arm/cpu/arm926ejs/mx28/timer.c           |   19 ++++-
>   arch/arm/cpu/armv7/imx-common/timer.c         |   75 ++++++++++++++-----
>   arch/arm/include/asm/arch-mx31/imx-regs.h     |   27 +++++++
>   arch/arm/include/asm/arch-mx35/imx-regs.h     |   25 ++++++
>   arch/arm/include/asm/arch-mx5/imx-regs.h      |   30 +++++++
>   arch/arm/include/asm/arch-mx6/imx-regs.h      |   48 ++++++++++++
>   board/freescale/mx28evk/iomux.c               |    8 ++
>   board/freescale/mx28evk/mx28evk.c             |    7 ++
>   board/freescale/mx35pdk/mx35pdk.c             |   27 +------
>   board/freescale/mx51evk/mx51evk.c             |    2 +
>   board/freescale/mx53ard/mx53ard.c             |    2 +
>   board/freescale/mx53evk/mx53evk.c             |    2 +
>   board/freescale/mx53loco/mx53loco.c           |    2 +
>   board/freescale/mx53smd/mx53smd.c             |    1 +
>   board/freescale/mx6qsabrelite/imximage.cfg    |    2 +-
>   board/freescale/mx6qsabrelite/mx6qsabrelite.c |   25 ++++++
>   common/image.c                                |   12 +--
>   drivers/spi/mxc_spi.c                         |   93
> ++---------------------
>   include/configs/mx28evk.h                     |   64 +++++++++++++++-
>   include/configs/mx6qsabrelite.h               |   29 ++++++-
>   27 files changed, 472 insertions(+), 192 deletions(-)
>
> Best regards,
> Stefano

Applied to u-boot-arm/master, thanks!

(that's not on u-boot/master yet though, as my pull request was sent out 
before this one)

Amicalement,
-- 
Albert.