[U-Boot] [GIT PULL] Pull request: u-boot-imx

[Stefano Babic <sbabic@denx.de>]

Hi Tom,

The following changes since commit 7c33c16f3bf53e563aa57e25e2399d0069a08749:
  Stefano Babic (1):
        Moved board specific values in config file

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

John Rigby (1):
      MX25 print arm clock instead of mpllclk on boot

Stefano Babic (8):
      mkimage: correct spelling error in imximage
      mx51evk: correct list of possible BOOT_FROM values
      MX31: add accessor function to get a gpio
      MX31: add pin definitions for NAND controller
      MX31: Add support for NAND to QONG board
      MX31: Support 128MB RAM on QONG module
      MX31: Add UBI support to QONG module
      MX31: Removed erroneous board name from QONG

 arch/arm/cpu/arm926ejs/mx25/generic.c      |    2 +-
 arch/arm/include/asm/arch-mx31/mx31-regs.h |   15 +++
 arch/arm/include/asm/arch-mx31/mx31.h      |    5 +
 board/davedenx/qong/lowlevel_init.S        |  130
+++++++++++++++++++++-------
 board/davedenx/qong/qong.c                 |   95 ++++++++++++++++-----
 board/davedenx/qong/qong_fpga.h            |    4 +-
 board/freescale/mx51evk/imximage.cfg       |    2 +-
 drivers/gpio/mx31_gpio.c                   |   15 +++
 include/configs/qong.h                     |   40 ++++++++-
 tools/imximage.c                           |    2 +-
 10 files changed, 246 insertions(+), 64 deletions(-)


Thanks,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================