[U-Boot] [GIT PULL] Pull request: u-boot-imx

[Stefano Babic <sbabic@denx.de>]

Hi Albert,

please pull from u-boot-imx, thanks.

The following changes since commit a9f1a4893364ddbb8b7942cded91d4c17c4f5948:

  lsxl: support power switch (2012-09-03 17:48:51 +0530)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 1d9b033269263a69f7402f508c17b242fc7fea43:

  mx35pdk: README: Remove NAND references (2012-09-17 13:17:17 +0200)

----------------------------------------------------------------
Ashok Kumar Reddy (2):
      ima3-mx53:Rename CONFIG_PRIME => CONFIG_ETHPRME, remove
      mx6qsabrelite:Use IMX_GPIO_NR Macro

Beno?t Th?baudeau (8):
      mx35: Fix decode_pll
      mx35: Add definitions for clock gate values
      mx35: Fix clock dividers
      mx25: Define default SoC input clock frequencies
      mx35: Define default SoC input clock frequencies
      mx35 timer: Switch to 32-kHz source
      Fix mx31_decode_pll
      mx31: Define default SoC input clock frequencies

Fabio Estevam (3):
      mx28evk: Convert to mxs_adjust_memory_params()
      mx28evk: Add USB Ethernet support
      mx35pdk: README: Remove NAND references

Marek Vasut (7):
      M28: Fix the use of gpmi-nand in mtdparts
      MX28: Cleanup mxsboot within make mrproper
      MX28: Fixup the ad-hoc use of DIGCTL_MICROSECONDS
      SCSPS1: Enable caches
      MX28: SPI: Fix the DMA DCache race condition
      MX28: SPI: Fix the DMA chaining
      MX28: MMC: Avoid DMA DCache race condition

Matt Sealey (1):
      efikamx: refine USB support

Otavio Salvador (3):
      MX28: mx28evk: Align SSP clock speed
      MX28: mx28evk: Enable SPI DMA
      mx28evk: extend default environment

Stefano Babic (3):
      MX: set a common place to share code for Freescale i.MX
      MX35: mx35pdk: add support for MMC
      MX6: drop binary constants from iomux header

 Makefile                                           |    8 +-
 arch/arm/cpu/arm1136/mx31/generic.c                |   12 +-
 arch/arm/cpu/arm1136/mx31/timer.c                  |   16 +--
 arch/arm/cpu/arm1136/mx35/generic.c                |   90 ++++++--------
 arch/arm/cpu/arm1136/mx35/timer.c                  |   46 +++++---
 arch/arm/cpu/arm926ejs/mx25/generic.c              |    2 +-
 arch/arm/cpu/arm926ejs/mx25/timer.c                |   16 +--
 arch/arm/cpu/arm926ejs/mxs/spl_boot.c              |    8 +-
 arch/arm/{cpu/armv7 => }/imx-common/Makefile       |    4 +-
 arch/arm/{cpu/armv7 => }/imx-common/cmd_bmode.c    |    0
 arch/arm/{cpu/armv7 => }/imx-common/cpu.c          |    0
 .../imx-common/i2c.c => imx-common/i2c-mxv7.c}     |    0
 arch/arm/{cpu/armv7 => }/imx-common/iomux-v3.c     |    0
 arch/arm/{cpu/armv7 => }/imx-common/speed.c        |    0
 arch/arm/{cpu/armv7 => }/imx-common/timer.c        |    0
 arch/arm/include/asm/arch-mx25/clock.h             |   14 +++
 arch/arm/include/asm/arch-mx31/clock.h             |   14 +++
 arch/arm/include/asm/arch-mx35/clock.h             |   14 +++
 arch/arm/include/asm/arch-mx35/crm_regs.h          |   48 +++-----
 arch/arm/include/asm/arch-mx6/iomux.h              |  124
++++++++++----------
 board/freescale/mx28evk/iomux.c                    |    2 +-
 board/freescale/mx28evk/mx28evk.c                  |    4 +-
 board/freescale/mx35pdk/README                     |   78 +-----------
 board/freescale/mx35pdk/mx35pdk.c                  |   25 ++++
 board/freescale/mx6qsabrelite/mx6qsabrelite.c      |   24 ++--
 board/genesi/mx51_efikamx/Makefile                 |    6 +-
 board/genesi/mx51_efikamx/efikamx-usb.c            |   12 ++
 board/genesi/mx51_efikamx/efikamx.c                |    3 -
 drivers/mmc/mxsmmc.c                               |    4 +
 drivers/spi/mxs_spi.c                              |   58 +++++----
 include/configs/flea3.h                            |    1 -
 include/configs/ima3-mx53.h                        |    3 +-
 include/configs/imx31_litekit.h                    |    1 -
 include/configs/imx31_phycore.h                    |    1 -
 include/configs/m28evk.h                           |    4 +-
 include/configs/mx25pdk.h                          |    1 -
 include/configs/mx28evk.h                          |   86 ++++++++++++--
 include/configs/mx31ads.h                          |    2 -
 include/configs/mx31pdk.h                          |    2 -
 include/configs/mx35pdk.h                          |   18 ++-
 include/configs/qong.h                             |    2 -
 include/configs/sc_sps_1.h                         |    2 -
 include/configs/tt01.h                             |    2 -
 include/configs/zmx25.h                            |    1 -
 44 files changed, 409 insertions(+), 349 deletions(-)
 rename arch/arm/{cpu/armv7 => }/imx-common/Makefile (94%)
 rename arch/arm/{cpu/armv7 => }/imx-common/cmd_bmode.c (100%)
 rename arch/arm/{cpu/armv7 => }/imx-common/cpu.c (100%)
 rename arch/arm/{cpu/armv7/imx-common/i2c.c => imx-common/i2c-mxv7.c}
(100%)
 rename arch/arm/{cpu/armv7 => }/imx-common/iomux-v3.c (100%)
 rename arch/arm/{cpu/armv7 => }/imx-common/speed.c (100%)
 rename arch/arm/{cpu/armv7 => }/imx-common/timer.c (100%)


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================