[U-Boot] [GIT PULL] Pull request: u-boot-imx

[Stefano Babic <sbabic@denx.de>]

Hi Albert,

please pull from u-boot-imx.

The following changes since commit 9a3aae22edf1eda6326cc51c28631ca5c23b7706:

  arm, davinci: Add support for the Calimain board from OMICRON
electronics (2012-02-12 10:11:33 +0100)

are available in the git repository at:
  git://www.denx.de/git/u-boot-imx.git master

Eric Nelson (6):
      mx6q: define GPIO macros for translating between ordinals and
port:index
      mxc_spi: move machine specifics into CPU headers
      mx6q: Add support for ECSPI through mxc_spi driver
      mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform
      mx6q: mx6qsabrelite: Provide default serial flash bus and chip-select
      mx6q: mx6qsabrelite: Conditionally define macros for environment
in serial flash

Fabio Estevam (7):
      mx53loco: Use gpio_direction_input prior to gpio_get_value
      mx53ard: Use gpio_direction_input prior to gpio_get_value
      mx53evk: Use gpio_direction_input prior to gpio_get_value
      mx53smd: Use gpio_direction_input prior to gpio_get_value
      mx51evk: Use gpio_direction_input prior to gpio_get_value
      mx35: generic: Let get_reset_cause be defined only when
CONFIG_DISPLAY_CPUINFO is selected
      mx35pdk: Remove duplicate CPU revision and reset cause information

Marek Vasut (2):
      i.MX28: Fix VDDIO and VDDA setup
      MX28: Fix get_timer() / get_tbclk() issue

Matthias Fuchs (4):
      mx28evk: add RTC support
      mx28evk: add USB support
      mx28evk: add SPI support
      mx28: fix SPL code to make USB booting work

Shawn Guo (1):
      common/image.c: align usage of fdt_high with initrd_high

Stefano Babic (4):
      MX35: add missing get_ticks() and get_tbclk()
      MX31: add missing get_tbclk()
      MX5/MX6: add missing get_ticks() and get_tbclk()
      MX27: add missing get_tbclk()

 README                                        |    8 ++
 arch/arm/cpu/arm1136/mx31/timer.c             |    9 ++
 arch/arm/cpu/arm1136/mx35/generic.c           |    2 +-
 arch/arm/cpu/arm1136/mx35/timer.c             |  103
+++++++++++++++---------
 arch/arm/cpu/arm926ejs/mx27/timer.c           |    5 +
 arch/arm/cpu/arm926ejs/mx28/spl_power_init.c  |   16 +++-
 arch/arm/cpu/arm926ejs/mx28/start.S           |   21 +++++-
 arch/arm/cpu/arm926ejs/mx28/timer.c           |   19 ++++-
 arch/arm/cpu/armv7/imx-common/timer.c         |   75 ++++++++++++++-----
 arch/arm/include/asm/arch-mx31/imx-regs.h     |   27 +++++++
 arch/arm/include/asm/arch-mx35/imx-regs.h     |   25 ++++++
 arch/arm/include/asm/arch-mx5/imx-regs.h      |   30 +++++++
 arch/arm/include/asm/arch-mx6/imx-regs.h      |   48 ++++++++++++
 board/freescale/mx28evk/iomux.c               |    8 ++
 board/freescale/mx28evk/mx28evk.c             |    7 ++
 board/freescale/mx35pdk/mx35pdk.c             |   27 +------
 board/freescale/mx51evk/mx51evk.c             |    2 +
 board/freescale/mx53ard/mx53ard.c             |    2 +
 board/freescale/mx53evk/mx53evk.c             |    2 +
 board/freescale/mx53loco/mx53loco.c           |    2 +
 board/freescale/mx53smd/mx53smd.c             |    1 +
 board/freescale/mx6qsabrelite/imximage.cfg    |    2 +-
 board/freescale/mx6qsabrelite/mx6qsabrelite.c |   25 ++++++
 common/image.c                                |   12 +--
 drivers/spi/mxc_spi.c                         |   93
++---------------------
 include/configs/mx28evk.h                     |   64 +++++++++++++++-
 include/configs/mx6qsabrelite.h               |   29 ++++++-
 27 files changed, 472 insertions(+), 192 deletions(-)

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================