* [lm-sensors] [PATCH 2/2] hwmon/f71882fg: Add support for F71808A
@ 2011-04-21 13:44 Hans de Goede
2011-04-27 14:04 ` Jean Delvare
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Hans de Goede @ 2011-04-21 13:44 UTC (permalink / raw)
To: lm-sensors
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Documentation/hwmon/f71882fg | 4 ++
drivers/hwmon/Kconfig | 2 +-
drivers/hwmon/f71882fg.c | 79 ++++++++++++++++++++++++++++++++++++++++-
3 files changed, 82 insertions(+), 3 deletions(-)
diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg
index df02245..84d2623 100644
--- a/Documentation/hwmon/f71882fg
+++ b/Documentation/hwmon/f71882fg
@@ -6,6 +6,10 @@ Supported chips:
Prefix: 'f71808e'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Not public
+ * Fintek F71808A
+ Prefix: 'f71808a'
+ Addresses scanned: none, address read from Super I/O config space
+ Datasheet: Not public
* Fintek F71858FG
Prefix: 'f71858fg'
Addresses scanned: none, address read from Super I/O config space
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 065d01b..b4ede46 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -320,7 +320,7 @@ config SENSORS_F71882FG
If you say yes here you get support for hardware monitoring
features of many Fintek Super-I/O (LPC) chips. The currently
supported chips are:
- F71808E
+ F71808E/A
F71858FG
F71862FG
F71863FG
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 16330db..341922d 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -48,6 +48,7 @@
#define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */
#define SIO_F71808E_ID 0x0901 /* Chipset ID */
+#define SIO_F71808A_ID 0x1001 /* Chipset ID */
#define SIO_F71858_ID 0x0507 /* Chipset ID */
#define SIO_F71862_ID 0x0601 /* Chipset ID */
#define SIO_F71869_ID 0x0814 /* Chipset ID */
@@ -107,11 +108,12 @@ static unsigned short force_id;
module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
-enum chips { f71808e, f71858fg, f71862fg, f71869, f71882fg, f71889fg,
+enum chips { f71808e, f71808a, f71858fg, f71862fg, f71869, f71882fg, f71889fg,
f71889ed, f71889a, f8000, f81865f };
static const char *f71882fg_names[] = {
"f71808e",
+ "f71808a",
"f71858fg",
"f71862fg",
"f71869", /* Both f71869f and f71869e, reg. compatible and same id */
@@ -125,6 +127,7 @@ static const char *f71882fg_names[] = {
static const char f71882fg_has_in[][F71882FG_MAX_INS] = {
[f71808e] = { 1, 1, 1, 1, 1, 1, 0, 1, 1 },
+ [f71808a] = { 1, 1, 1, 1, 0, 0, 0, 1, 1 },
[f71858fg] = { 1, 1, 1, 0, 0, 0, 0, 0, 0 },
[f71862fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
[f71869] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
@@ -138,6 +141,7 @@ static const char f71882fg_has_in[][F71882FG_MAX_INS] = {
static const char f71882fg_has_in1_alarm[] = {
[f71808e] = 0,
+ [f71808a] = 0,
[f71858fg] = 0,
[f71862fg] = 0,
[f71869] = 0,
@@ -151,6 +155,7 @@ static const char f71882fg_has_in1_alarm[] = {
static const char f71882fg_fan_has_beep[] = {
[f71808e] = 0,
+ [f71808a] = 0,
[f71858fg] = 0,
[f71862fg] = 1,
[f71869] = 1,
@@ -164,6 +169,7 @@ static const char f71882fg_fan_has_beep[] = {
static const char f71882fg_nr_fans[] = {
[f71808e] = 3,
+ [f71808a] = 2, /* +1 fan which is monitor + simple pwm only */
[f71858fg] = 3,
[f71862fg] = 3,
[f71869] = 3,
@@ -171,12 +177,13 @@ static const char f71882fg_nr_fans[] = {
[f71889fg] = 3,
[f71889ed] = 3,
[f71889a] = 3,
- [f8000] = 3,
+ [f8000] = 3, /* +1 fan which is monitor only */
[f81865f] = 2,
};
static const char f71882fg_temp_has_beep[] = {
[f71808e] = 0,
+ [f71808a] = 1,
[f71858fg] = 0,
[f71862fg] = 1,
[f71869] = 1,
@@ -190,6 +197,7 @@ static const char f71882fg_temp_has_beep[] = {
static const char f71882fg_nr_temps[] = {
[f71808e] = 2,
+ [f71808a] = 2,
[f71858fg] = 3,
[f71862fg] = 3,
[f71869] = 3,
@@ -314,6 +322,10 @@ static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr,
char *buf);
static ssize_t store_pwm(struct device *dev, struct device_attribute *devattr,
const char *buf, size_t count);
+static ssize_t show_simple_pwm(struct device *dev,
+ struct device_attribute *devattr, char *buf);
+static ssize_t store_simple_pwm(struct device *dev,
+ struct device_attribute *devattr, const char *buf, size_t count);
static ssize_t show_pwm_enable(struct device *dev,
struct device_attribute *devattr, char *buf);
static ssize_t store_pwm_enable(struct device *dev,
@@ -563,6 +575,14 @@ static struct sensor_device_attribute_2 fxxxx_fan_attr[4][6] = { {
show_pwm_interpolate, store_pwm_interpolate, 0, 3),
} };
+/* Attr for the third fan of the f71808a, which only has manual pwm */
+static struct sensor_device_attribute_2 f71808a_fan3_attr[] = {
+ SENSOR_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 0, 2),
+ SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2),
+ SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR,
+ show_simple_pwm, store_simple_pwm, 0, 2),
+};
+
/* Attr for models which can beep on Fan alarm */
static struct sensor_device_attribute_2 fxxxx_fan_beep_attr[] = {
SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
@@ -1736,6 +1756,38 @@ leave:
return count;
}
+static ssize_t show_simple_pwm(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct f71882fg_data *data = f71882fg_update_device(dev);
+ int val, nr = to_sensor_dev_attr_2(devattr)->index;
+
+ val = data->pwm[nr];
+ return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t store_simple_pwm(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct f71882fg_data *data = dev_get_drvdata(dev);
+ int err, nr = to_sensor_dev_attr_2(devattr)->index;
+ long val;
+
+ err = strict_strtol(buf, 10, &val);
+ if (err)
+ return err;
+
+ val = SENSORS_LIMIT(val, 0, 255);
+
+ mutex_lock(&data->update_lock);
+ f71882fg_write8(data, F71882FG_REG_PWM(nr), val);
+ data->pwm[nr] = val;
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
static ssize_t show_pwm_enable(struct device *dev,
struct device_attribute *devattr, char *buf)
{
@@ -2182,6 +2234,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
if (start_reg & 0x02) {
switch (data->type) {
+ case f71808a:
case f71808e:
case f71869:
/* These always have signed auto point temps */
@@ -2243,6 +2296,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
}
switch (data->type) {
+ case f71808a:
case f71808e:
case f71869:
case f71889fg:
@@ -2269,6 +2323,16 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
}
switch (data->type) {
+ case f71808a:
+ err = f71882fg_create_sysfs_files(pdev,
+ &fxxxx_auto_pwm_attr[0][0],
+ ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
+ if (err)
+ goto exit_unregister_sysfs;
+ err = f71882fg_create_sysfs_files(pdev,
+ f71808a_fan3_attr,
+ ARRAY_SIZE(f71808a_fan3_attr));
+ break;
case f71862fg:
err = f71882fg_create_sysfs_files(pdev,
f71862fg_auto_pwm_attr,
@@ -2386,6 +2450,14 @@ static int f71882fg_remove(struct platform_device *pdev)
}
switch (data->type) {
+ case f71808a:
+ f71882fg_remove_sysfs_files(pdev,
+ &fxxxx_auto_pwm_attr[0][0],
+ ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
+ f71882fg_remove_sysfs_files(pdev,
+ f71808a_fan3_attr,
+ ARRAY_SIZE(f71808a_fan3_attr));
+ break;
case f71862fg:
f71882fg_remove_sysfs_files(pdev,
f71862fg_auto_pwm_attr,
@@ -2438,6 +2510,9 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
case SIO_F71808E_ID:
sio_data->type = f71808e;
break;
+ case SIO_F71808A_ID:
+ sio_data->type = f71808a;
+ break;
case SIO_F71858_ID:
sio_data->type = f71858fg;
break;
--
1.7.4.4
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [lm-sensors] [PATCH 2/2] hwmon/f71882fg: Add support for F71808A
2011-04-21 13:44 [lm-sensors] [PATCH 2/2] hwmon/f71882fg: Add support for F71808A Hans de Goede
@ 2011-04-27 14:04 ` Jean Delvare
2011-04-27 14:17 ` Jean Delvare
2011-04-27 17:32 ` Hans de Goede
2 siblings, 0 replies; 4+ messages in thread
From: Jean Delvare @ 2011-04-27 14:04 UTC (permalink / raw)
To: lm-sensors
On Thu, 21 Apr 2011 15:44:18 +0200, Hans de Goede wrote:
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Documentation/hwmon/f71882fg | 4 ++
> drivers/hwmon/Kconfig | 2 +-
> drivers/hwmon/f71882fg.c | 79 ++++++++++++++++++++++++++++++++++++++++-
> 3 files changed, 82 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg
> index df02245..84d2623 100644
> --- a/Documentation/hwmon/f71882fg
> +++ b/Documentation/hwmon/f71882fg
> @@ -6,6 +6,10 @@ Supported chips:
> Prefix: 'f71808e'
> Addresses scanned: none, address read from Super I/O config space
> Datasheet: Not public
> + * Fintek F71808A
> + Prefix: 'f71808a'
> + Addresses scanned: none, address read from Super I/O config space
> + Datasheet: Not public
> * Fintek F71858FG
> Prefix: 'f71858fg'
> Addresses scanned: none, address read from Super I/O config space
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 065d01b..b4ede46 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -320,7 +320,7 @@ config SENSORS_F71882FG
> If you say yes here you get support for hardware monitoring
> features of many Fintek Super-I/O (LPC) chips. The currently
> supported chips are:
> - F71808E
> + F71808E/A
> F71858FG
> F71862FG
> F71863FG
> diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
> index 16330db..341922d 100644
> --- a/drivers/hwmon/f71882fg.c
> +++ b/drivers/hwmon/f71882fg.c
> @@ -48,6 +48,7 @@
>
> #define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */
> #define SIO_F71808E_ID 0x0901 /* Chipset ID */
> +#define SIO_F71808A_ID 0x1001 /* Chipset ID */
> #define SIO_F71858_ID 0x0507 /* Chipset ID */
> #define SIO_F71862_ID 0x0601 /* Chipset ID */
> #define SIO_F71869_ID 0x0814 /* Chipset ID */
> @@ -107,11 +108,12 @@ static unsigned short force_id;
> module_param(force_id, ushort, 0);
> MODULE_PARM_DESC(force_id, "Override the detected device ID");
>
> -enum chips { f71808e, f71858fg, f71862fg, f71869, f71882fg, f71889fg,
> +enum chips { f71808e, f71808a, f71858fg, f71862fg, f71869, f71882fg, f71889fg,
> f71889ed, f71889a, f8000, f81865f };
>
> static const char *f71882fg_names[] = {
> "f71808e",
> + "f71808a",
> "f71858fg",
> "f71862fg",
> "f71869", /* Both f71869f and f71869e, reg. compatible and same id */
> @@ -125,6 +127,7 @@ static const char *f71882fg_names[] = {
>
> static const char f71882fg_has_in[][F71882FG_MAX_INS] = {
> [f71808e] = { 1, 1, 1, 1, 1, 1, 0, 1, 1 },
> + [f71808a] = { 1, 1, 1, 1, 0, 0, 0, 1, 1 },
> [f71858fg] = { 1, 1, 1, 0, 0, 0, 0, 0, 0 },
> [f71862fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
> [f71869] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
> @@ -138,6 +141,7 @@ static const char f71882fg_has_in[][F71882FG_MAX_INS] = {
>
> static const char f71882fg_has_in1_alarm[] = {
> [f71808e] = 0,
> + [f71808a] = 0,
> [f71858fg] = 0,
> [f71862fg] = 0,
> [f71869] = 0,
> @@ -151,6 +155,7 @@ static const char f71882fg_has_in1_alarm[] = {
>
> static const char f71882fg_fan_has_beep[] = {
> [f71808e] = 0,
> + [f71808a] = 0,
> [f71858fg] = 0,
> [f71862fg] = 1,
> [f71869] = 1,
> @@ -164,6 +169,7 @@ static const char f71882fg_fan_has_beep[] = {
>
> static const char f71882fg_nr_fans[] = {
> [f71808e] = 3,
> + [f71808a] = 2, /* +1 fan which is monitor + simple pwm only */
> [f71858fg] = 3,
> [f71862fg] = 3,
> [f71869] = 3,
> @@ -171,12 +177,13 @@ static const char f71882fg_nr_fans[] = {
> [f71889fg] = 3,
> [f71889ed] = 3,
> [f71889a] = 3,
> - [f8000] = 3,
> + [f8000] = 3, /* +1 fan which is monitor only */
> [f81865f] = 2,
> };
>
> static const char f71882fg_temp_has_beep[] = {
> [f71808e] = 0,
> + [f71808a] = 1,
> [f71858fg] = 0,
> [f71862fg] = 1,
> [f71869] = 1,
> @@ -190,6 +197,7 @@ static const char f71882fg_temp_has_beep[] = {
>
> static const char f71882fg_nr_temps[] = {
> [f71808e] = 2,
> + [f71808a] = 2,
> [f71858fg] = 3,
> [f71862fg] = 3,
> [f71869] = 3,
> @@ -314,6 +322,10 @@ static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr,
> char *buf);
> static ssize_t store_pwm(struct device *dev, struct device_attribute *devattr,
> const char *buf, size_t count);
> +static ssize_t show_simple_pwm(struct device *dev,
> + struct device_attribute *devattr, char *buf);
> +static ssize_t store_simple_pwm(struct device *dev,
> + struct device_attribute *devattr, const char *buf, size_t count);
> static ssize_t show_pwm_enable(struct device *dev,
> struct device_attribute *devattr, char *buf);
> static ssize_t store_pwm_enable(struct device *dev,
> @@ -563,6 +575,14 @@ static struct sensor_device_attribute_2 fxxxx_fan_attr[4][6] = { {
> show_pwm_interpolate, store_pwm_interpolate, 0, 3),
> } };
>
> +/* Attr for the third fan of the f71808a, which only has manual pwm */
> +static struct sensor_device_attribute_2 f71808a_fan3_attr[] = {
> + SENSOR_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 0, 2),
> + SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2),
> + SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR,
> + show_simple_pwm, store_simple_pwm, 0, 2),
> +};
> +
> /* Attr for models which can beep on Fan alarm */
> static struct sensor_device_attribute_2 fxxxx_fan_beep_attr[] = {
> SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
> @@ -1736,6 +1756,38 @@ leave:
> return count;
> }
>
> +static ssize_t show_simple_pwm(struct device *dev,
> + struct device_attribute *devattr, char *buf)
> +{
> + struct f71882fg_data *data = f71882fg_update_device(dev);
> + int val, nr = to_sensor_dev_attr_2(devattr)->index;
> +
> + val = data->pwm[nr];
> + return sprintf(buf, "%d\n", val);
> +}
> +
> +static ssize_t store_simple_pwm(struct device *dev,
> + struct device_attribute *devattr,
> + const char *buf, size_t count)
> +{
> + struct f71882fg_data *data = dev_get_drvdata(dev);
> + int err, nr = to_sensor_dev_attr_2(devattr)->index;
> + long val;
> +
> + err = strict_strtol(buf, 10, &val);
> + if (err)
> + return err;
> +
> + val = SENSORS_LIMIT(val, 0, 255);
> +
> + mutex_lock(&data->update_lock);
> + f71882fg_write8(data, F71882FG_REG_PWM(nr), val);
> + data->pwm[nr] = val;
> + mutex_unlock(&data->update_lock);
> +
> + return count;
> +}
> +
> static ssize_t show_pwm_enable(struct device *dev,
> struct device_attribute *devattr, char *buf)
> {
> @@ -2182,6 +2234,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
>
> if (start_reg & 0x02) {
> switch (data->type) {
> + case f71808a:
> case f71808e:
> case f71869:
> /* These always have signed auto point temps */
> @@ -2243,6 +2296,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
> }
>
> switch (data->type) {
> + case f71808a:
> case f71808e:
> case f71869:
> case f71889fg:
Nitpicking: in all other places you listed the f71808e first, so you
should do the same here for consistency.
> @@ -2269,6 +2323,16 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
> }
>
> switch (data->type) {
> + case f71808a:
> + err = f71882fg_create_sysfs_files(pdev,
> + &fxxxx_auto_pwm_attr[0][0],
> + ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
> + if (err)
> + goto exit_unregister_sysfs;
> + err = f71882fg_create_sysfs_files(pdev,
> + f71808a_fan3_attr,
> + ARRAY_SIZE(f71808a_fan3_attr));
> + break;
> case f71862fg:
> err = f71882fg_create_sysfs_files(pdev,
> f71862fg_auto_pwm_attr,
> @@ -2386,6 +2450,14 @@ static int f71882fg_remove(struct platform_device *pdev)
> }
>
> switch (data->type) {
> + case f71808a:
> + f71882fg_remove_sysfs_files(pdev,
> + &fxxxx_auto_pwm_attr[0][0],
> + ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
> + f71882fg_remove_sysfs_files(pdev,
> + f71808a_fan3_attr,
> + ARRAY_SIZE(f71808a_fan3_attr));
> + break;
> case f71862fg:
> f71882fg_remove_sysfs_files(pdev,
> f71862fg_auto_pwm_attr,
> @@ -2438,6 +2510,9 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
> case SIO_F71808E_ID:
> sio_data->type = f71808e;
> break;
> + case SIO_F71808A_ID:
> + sio_data->type = f71808a;
> + break;
> case SIO_F71858_ID:
> sio_data->type = f71858fg;
> break;
Other than this, it looks all reasonable, so I've adjusted the code
myself and applied the patch. Thanks for your contribution.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [lm-sensors] [PATCH 2/2] hwmon/f71882fg: Add support for F71808A
2011-04-21 13:44 [lm-sensors] [PATCH 2/2] hwmon/f71882fg: Add support for F71808A Hans de Goede
2011-04-27 14:04 ` Jean Delvare
@ 2011-04-27 14:17 ` Jean Delvare
2011-04-27 17:32 ` Hans de Goede
2 siblings, 0 replies; 4+ messages in thread
From: Jean Delvare @ 2011-04-27 14:17 UTC (permalink / raw)
To: lm-sensors
Err, wait a minute...
On Thu, 21 Apr 2011 15:44:18 +0200, Hans de Goede wrote:
> @@ -164,6 +169,7 @@ static const char f71882fg_fan_has_beep[] = {
>
> static const char f71882fg_nr_fans[] = {
> [f71808e] = 3,
> + [f71808a] = 2, /* +1 fan which is monitor + simple pwm only */
> [f71858fg] = 3,
> [f71862fg] = 3,
> [f71869] = 3,
The values related to the extra fan are never read from the chip, are
they?
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [lm-sensors] [PATCH 2/2] hwmon/f71882fg: Add support for F71808A
2011-04-21 13:44 [lm-sensors] [PATCH 2/2] hwmon/f71882fg: Add support for F71808A Hans de Goede
2011-04-27 14:04 ` Jean Delvare
2011-04-27 14:17 ` Jean Delvare
@ 2011-04-27 17:32 ` Hans de Goede
2 siblings, 0 replies; 4+ messages in thread
From: Hans de Goede @ 2011-04-27 17:32 UTC (permalink / raw)
To: lm-sensors
Hi
On 04/27/2011 04:17 PM, Jean Delvare wrote:
> Err, wait a minute...
>
> On Thu, 21 Apr 2011 15:44:18 +0200, Hans de Goede wrote:
>> @@ -164,6 +169,7 @@ static const char f71882fg_fan_has_beep[] = {
>>
>> static const char f71882fg_nr_fans[] = {
>> [f71808e] = 3,
>> + [f71808a] = 2, /* +1 fan which is monitor + simple pwm only */
>> [f71858fg] = 3,
>> [f71862fg] = 3,
>> [f71869] = 3,
>
> The values related to the extra fan are never read from the chip, are
> they?
Ugh, good catch, I _cannot_ believe I forgot that, but well I did :)
1 patch fixing this coming up. Feel free to squash it into the
"Add support for F71808A" commit if you prefer not having a git tree
status with this bug in there.
Regards,
Hans
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-04-27 17:32 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-04-21 13:44 [lm-sensors] [PATCH 2/2] hwmon/f71882fg: Add support for F71808A Hans de Goede
2011-04-27 14:04 ` Jean Delvare
2011-04-27 14:17 ` Jean Delvare
2011-04-27 17:32 ` Hans de Goede
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.