From: "Cédric Cano" <ccano@interfaceconcept.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org, linux-scsi@vger.kernel.org
Subject: Re: [PATCH 1/1] Big endian swap for Marvell 6440 SAS driver
Date: Tue, 14 Jun 2011 08:42:59 +0200 [thread overview]
Message-ID: <4DF702F3.704@interfaceconcept.com> (raw)
In-Reply-To: <1307832356.2874.312.camel@pasglop>
Hi Ben,
You're alright! I hadn't thought to use le32_to_cpu.
Do you want I make a new patch?
Cedric
Le 12/06/2011 00:45, Benjamin Herrenschmidt a écrit :
> On Fri, 2011-06-10 at 15:56 +0200, Cédric Cano wrote:
>> Hi,
>>
>> Marvell SAS driver doesn't work on powerpc architecture due to big
>> endian swap. I've tested it with the MV6440 chip.
>> Here you can find the patch for Linux 2.6.39.1.
>>
>> Cedric Cano
>>
>> Signed-off-by: Cedric Cano<ccano@interfaceconcept.com>
>> ---
>> --- drivers/scsi/mvsas/mv_sas.c 2011-06-10 15:50:04.000000000 +0200
>> +++ drivers/scsi/mvsas/mv_sas.c 2011-06-10 15:50:12.000000000 +0200
>> @@ -1143,6 +1143,14 @@
>> MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_SATA_SIG0);
>> s[0] = MVS_CHIP_DISP->read_port_cfg_data(mvi, i);
>>
>> + /* swap for big endian devices because of use of these data in bytes */
>> +#ifdef __BIG_ENDIAN
>> + s[0] = swab32(s[0]);
>> + s[1] = swab32(s[1]);
>> + s[2] = swab32(s[2]);
>> + s[3] = swab32(s[3]);
>> +#endif /* __BIG_ENDIAN */
> Hi Cedric !
>
> Thanks for this. CC'ing linux-scsi.
>
> Note that it would probably have been better to use le32_to_cpu, which
> avoids the ifdef completely.
>
> Cheers,
> Ben.
>
>> /* Workaround: take some ATAPI devices for ATA */
>> if (((s[1]& 0x00FFFFFF) == 0x00EB1401)&& (*(u8 *)&s[3] == 0x01))
>> s[1] = 0x00EB1401 | (*((u8 *)&s[1] + 3)& 0x10);
>>
>> ---
>> _______________________________________________
>> Linuxppc-dev mailing list
>> Linuxppc-dev@lists.ozlabs.org
>> https://lists.ozlabs.org/listinfo/linuxppc-dev
>
>
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
WARNING: multiple messages have this Message-ID (diff)
From: "Cédric Cano" <ccano@interfaceconcept.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org, linux-scsi@vger.kernel.org
Subject: Re: [PATCH 1/1] Big endian swap for Marvell 6440 SAS driver
Date: Tue, 14 Jun 2011 08:42:59 +0200 [thread overview]
Message-ID: <4DF702F3.704@interfaceconcept.com> (raw)
In-Reply-To: <1307832356.2874.312.camel@pasglop>
Hi Ben,
You're alright! I hadn't thought to use le32_to_cpu.
Do you want I make a new patch?
Cedric
Le 12/06/2011 00:45, Benjamin Herrenschmidt a écrit :
> On Fri, 2011-06-10 at 15:56 +0200, Cédric Cano wrote:
>> Hi,
>>
>> Marvell SAS driver doesn't work on powerpc architecture due to big
>> endian swap. I've tested it with the MV6440 chip.
>> Here you can find the patch for Linux 2.6.39.1.
>>
>> Cedric Cano
>>
>> Signed-off-by: Cedric Cano<ccano@interfaceconcept.com>
>> ---
>> --- drivers/scsi/mvsas/mv_sas.c 2011-06-10 15:50:04.000000000 +0200
>> +++ drivers/scsi/mvsas/mv_sas.c 2011-06-10 15:50:12.000000000 +0200
>> @@ -1143,6 +1143,14 @@
>> MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_SATA_SIG0);
>> s[0] = MVS_CHIP_DISP->read_port_cfg_data(mvi, i);
>>
>> + /* swap for big endian devices because of use of these data in bytes */
>> +#ifdef __BIG_ENDIAN
>> + s[0] = swab32(s[0]);
>> + s[1] = swab32(s[1]);
>> + s[2] = swab32(s[2]);
>> + s[3] = swab32(s[3]);
>> +#endif /* __BIG_ENDIAN */
> Hi Cedric !
>
> Thanks for this. CC'ing linux-scsi.
>
> Note that it would probably have been better to use le32_to_cpu, which
> avoids the ifdef completely.
>
> Cheers,
> Ben.
>
>> /* Workaround: take some ATAPI devices for ATA */
>> if (((s[1]& 0x00FFFFFF) == 0x00EB1401)&& (*(u8 *)&s[3] == 0x01))
>> s[1] = 0x00EB1401 | (*((u8 *)&s[1] + 3)& 0x10);
>>
>> ---
>> _______________________________________________
>> Linuxppc-dev mailing list
>> Linuxppc-dev@lists.ozlabs.org
>> https://lists.ozlabs.org/listinfo/linuxppc-dev
>
>
next prev parent reply other threads:[~2011-06-14 6:42 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-10 13:56 [PATCH 1/1] Big endian swap for Marvell 6440 SAS driver Cédric Cano
2011-06-11 22:45 ` Benjamin Herrenschmidt
2011-06-11 22:45 ` Benjamin Herrenschmidt
2011-06-14 6:42 ` Cédric Cano [this message]
2011-06-14 6:42 ` Cédric Cano
2011-06-14 7:05 ` Benjamin Herrenschmidt
2011-06-14 7:05 ` Benjamin Herrenschmidt
-- strict thread matches above, loose matches on Subject: below --
2011-06-14 9:31 Cédric Cano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DF702F3.704@interfaceconcept.com \
--to=ccano@interfaceconcept.com \
--cc=benh@kernel.crashing.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.