All of lore.kernel.org
 help / color / mirror / Atom feed
From: Brian King <brking@linux.vnet.ibm.com>
To: Wayne Boyer <wayneb@linux.vnet.ibm.com>
Cc: Julia Lawall <julia@diku.dk>, Brian King <brking@us.ibm.com>,
	kernel-janitors@vger.kernel.org,
	"James E.J. Bottomley" <JBottomley@parallels.com>,
	linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] drivers/scsi/ipr.c: reorder error handling code to include
Date: Tue, 14 Jun 2011 16:09:32 +0000	[thread overview]
Message-ID: <4DF787BC.8050701@linux.vnet.ibm.com> (raw)
In-Reply-To: <4DF0EC00.9020603@linux.vnet.ibm.com>

On 06/09/2011 10:51 AM, Wayne Boyer wrote:
> On 05/31/2011 07:16 AM, Julia Lawall wrote:
>> From: Julia Lawall <julia@diku.dk>
>>
>> The out_msi_disable label should be before cleanup_nomem to additionally
>> benefit from the call to iounmap.
> 
> Yes, this is a problem.  I propose the following patch instead.

By removing the out_msi_disable label, if you fail initialization later
on and goto cleanup_nomem, you will end up leaving MSI enabled when you exit
with this patch.

-Brian



> 
> ---
> 
> In the case where ipr_test_msi returns an error that is not -EOPNOTSUPP, the
> execution jumps to the out_msi_disable label.  This misses the call to iounmap
> for ipr_regs which was initialized earlier.
> 
> The fix is to do the call to pci_disable_msi when the error case is detected
> and then goto the cleanup_nomem label if the error is not -EOPNOTSUPP.
> 
> Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
> ---
> 
>  drivers/scsi/ipr.c |   10 ++++------
>  1 file changed, 4 insertions(+), 6 deletions(-)
> 
> Index: b/drivers/scsi/ipr.c
> =================================> --- a/drivers/scsi/ipr.c        2011-06-09 08:14:44.927740117 -0700
> +++ b/drivers/scsi/ipr.c        2011-06-09 08:50:10.105630466 -0700
> @@ -8763,11 +8763,11 @@ static int __devinit ipr_probe_ioa(struc
>         /* Enable MSI style interrupts if they are supported. */
>         if (ioa_cfg->ipr_chip->intr_type = IPR_USE_MSI && !pci_enable_msi(pdev)) {
>                 rc = ipr_test_msi(ioa_cfg, pdev);
> -               if (rc = -EOPNOTSUPP)
> +               if (rc) {
>                         pci_disable_msi(pdev);
> -               else if (rc)
> -                       goto out_msi_disable;
> -               else
> +                       if (rc != -EOPNOTSUPP)
> +                               goto cleanup_nomem;
> +               } else
>                         dev_info(&pdev->dev, "MSI enabled with IRQ: %d\n", pdev->irq);
>         } else if (ipr_debug)
>                 dev_info(&pdev->dev, "Cannot enable MSI.\n");
> @@ -8847,8 +8847,6 @@ cleanup_nolog:
>         ipr_free_mem(ioa_cfg);
>  cleanup_nomem:
>         iounmap(ipr_regs);
> -out_msi_disable:
> -       pci_disable_msi(pdev);
>  out_release_regions:
>         pci_release_regions(pdev);
>  out_scsi_host_put:
> 
> 


-- 
Brian King
Linux on Power Virtualization
IBM Linux Technology Center



WARNING: multiple messages have this Message-ID (diff)
From: Brian King <brking@linux.vnet.ibm.com>
To: Wayne Boyer <wayneb@linux.vnet.ibm.com>
Cc: Julia Lawall <julia@diku.dk>, Brian King <brking@us.ibm.com>,
	kernel-janitors@vger.kernel.org,
	"James E.J. Bottomley" <JBottomley@parallels.com>,
	linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] drivers/scsi/ipr.c: reorder error handling code to include iounmap
Date: Tue, 14 Jun 2011 11:09:32 -0500	[thread overview]
Message-ID: <4DF787BC.8050701@linux.vnet.ibm.com> (raw)
In-Reply-To: <4DF0EC00.9020603@linux.vnet.ibm.com>

On 06/09/2011 10:51 AM, Wayne Boyer wrote:
> On 05/31/2011 07:16 AM, Julia Lawall wrote:
>> From: Julia Lawall <julia@diku.dk>
>>
>> The out_msi_disable label should be before cleanup_nomem to additionally
>> benefit from the call to iounmap.
> 
> Yes, this is a problem.  I propose the following patch instead.

By removing the out_msi_disable label, if you fail initialization later
on and goto cleanup_nomem, you will end up leaving MSI enabled when you exit
with this patch.

-Brian



> 
> ---
> 
> In the case where ipr_test_msi returns an error that is not -EOPNOTSUPP, the
> execution jumps to the out_msi_disable label.  This misses the call to iounmap
> for ipr_regs which was initialized earlier.
> 
> The fix is to do the call to pci_disable_msi when the error case is detected
> and then goto the cleanup_nomem label if the error is not -EOPNOTSUPP.
> 
> Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
> ---
> 
>  drivers/scsi/ipr.c |   10 ++++------
>  1 file changed, 4 insertions(+), 6 deletions(-)
> 
> Index: b/drivers/scsi/ipr.c
> ===================================================================
> --- a/drivers/scsi/ipr.c        2011-06-09 08:14:44.927740117 -0700
> +++ b/drivers/scsi/ipr.c        2011-06-09 08:50:10.105630466 -0700
> @@ -8763,11 +8763,11 @@ static int __devinit ipr_probe_ioa(struc
>         /* Enable MSI style interrupts if they are supported. */
>         if (ioa_cfg->ipr_chip->intr_type == IPR_USE_MSI && !pci_enable_msi(pdev)) {
>                 rc = ipr_test_msi(ioa_cfg, pdev);
> -               if (rc == -EOPNOTSUPP)
> +               if (rc) {
>                         pci_disable_msi(pdev);
> -               else if (rc)
> -                       goto out_msi_disable;
> -               else
> +                       if (rc != -EOPNOTSUPP)
> +                               goto cleanup_nomem;
> +               } else
>                         dev_info(&pdev->dev, "MSI enabled with IRQ: %d\n", pdev->irq);
>         } else if (ipr_debug)
>                 dev_info(&pdev->dev, "Cannot enable MSI.\n");
> @@ -8847,8 +8847,6 @@ cleanup_nolog:
>         ipr_free_mem(ioa_cfg);
>  cleanup_nomem:
>         iounmap(ipr_regs);
> -out_msi_disable:
> -       pci_disable_msi(pdev);
>  out_release_regions:
>         pci_release_regions(pdev);
>  out_scsi_host_put:
> 
> 


-- 
Brian King
Linux on Power Virtualization
IBM Linux Technology Center



  reply	other threads:[~2011-06-14 16:09 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-31 14:16 [PATCH] drivers/scsi/ipr.c: reorder error handling code to include iounmap Julia Lawall
2011-05-31 14:16 ` Julia Lawall
2011-06-01 15:02 ` [PATCH] drivers/scsi/ipr.c: reorder error handling code to include Brian King
2011-06-01 15:02   ` [PATCH] drivers/scsi/ipr.c: reorder error handling code to include iounmap Brian King
2011-06-09 15:51 ` [PATCH] drivers/scsi/ipr.c: reorder error handling code to include Wayne Boyer
2011-06-09 15:51   ` [PATCH] drivers/scsi/ipr.c: reorder error handling code to include iounmap Wayne Boyer
2011-06-14 16:09   ` Brian King [this message]
2011-06-14 16:09     ` Brian King
2011-06-15  8:50     ` [PATCH] drivers/scsi/ipr.c: reorder error handling code to Julia Lawall
2011-06-15  8:50       ` [PATCH] drivers/scsi/ipr.c: reorder error handling code to include iounmap Julia Lawall
2011-06-20 16:47       ` [PATCH] drivers/scsi/ipr.c: reorder error handling code to include Wayne Boyer
2011-06-20 16:47         ` [PATCH] drivers/scsi/ipr.c: reorder error handling code to include iounmap Wayne Boyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4DF787BC.8050701@linux.vnet.ibm.com \
    --to=brking@linux.vnet.ibm.com \
    --cc=JBottomley@parallels.com \
    --cc=brking@us.ibm.com \
    --cc=julia@diku.dk \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=wayneb@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.