From: Huang Shijie <b32955@freescale.com>
To: Koen Beel <koen.beel.barco@gmail.com>
Cc: arnd@arndb.de, dedekind1@gmail.com,
"Wolfram Sang" <w.sang@pengutronix.de>,
linux-mtd@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, shijie8@gmail.com,
"Shawn Guo" <shawn.guo@freescale.com>,
"Lothar Waßmann" <LW@karo-electronics.de>
Subject: Re: [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28
Date: Fri, 29 Jul 2011 17:49:48 +0800 [thread overview]
Message-ID: <4E32823C.3060007@freescale.com> (raw)
In-Reply-To: <CAHMSPgM5W8=mE4sRDGMMfo39fvThBo_jrdG8hyhJNQ_ceV=_pA@mail.gmail.com>
于 2011年07月29日 15:40, Koen Beel 写道:
> Hi,
>
> On Fri, Jul 29, 2011 at 9:20 AM, Lothar Waßmann<LW@karo-electronics.de> wrote:
>> Hi,
>>
>> Koen Beel writes:
>>> Hi,
>>>
>>> I have test on mx23evk board. Still see the same issues.
>>>
>>> On Wed, Jul 27, 2011 at 3:53 AM, Huang Shijie<b32955@freescale.com> wrote:
>>>> Hi,
>>>>
>>>> Thanks for your test.
>>>>
>>>>> Hi,
>>>>>
>>>>> It's not really working for me.
>>>>> I've applied all gpmi-nand driver patches and the dma driver patches.
>>>>>
>>>>> I have added following kernel parameters:
>>>>> mtdparts=gpmi-nand:20m(boot),-(user) ubi.mtd=1 root=ubi0:rootfs0
>>>>> rootfstype=ubifs gpmi_debug_init
>>>>>
>>>>> During boot I get already get DMA timeout:
>>>>> [ 2.560000] [ start_dma_without_bch_irq : 392 ] DMA timeout, last DMA
>>>>> :1
>>>>> [ 3.560000] [ start_dma_with_bch_irq : 427 ] bch timeout!!!
>>>>> ...
>>>>> (see log file in attach line 89)
>>> I still see this DMA timeout when booting.
>>> What kernel parameters do you use? I still use same as above.
>>>
>> Do you have an SD card in the system? I'm getting the same error when
>> accessing an SD card. Without SD card I can use the flash without any
>> errors.
> No SD card in the system. At least not on my mx23evk board.
> My real target hardware has a SDIO wifi chip.
Does it conflict with the GPMI?
> Are you also testing on the mx23evk board? Really strange it is not
> reproducible here then.
> Anyone using mx23evk please give:
I tested the code in mx23evk.
After boot the kernel and login the shell, I met a problem:
the flash_eraseall can not run with the log:
"Floating point exception"
:(
> - revision number of board (I have tested on rev C1)
Revision number is C.
> - kernel parameter used (see previous mail for mine)
>
"console=ttyAMA0,115200 root=/dev/mmcblk0p1 rw rootwait gpmi_debug_init"
Best Regards
Huang Shijie
> Regards,
> Koen
>
>>
>> Lothar Waßmann
>> --
>> ___________________________________________________________
>>
>> Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
>> Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
>> Geschäftsführer: Matthias Kaussen
>> Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
>>
>> www.karo-electronics.de | info@karo-electronics.de
>> ___________________________________________________________
>>
WARNING: multiple messages have this Message-ID (diff)
From: b32955@freescale.com (Huang Shijie)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28
Date: Fri, 29 Jul 2011 17:49:48 +0800 [thread overview]
Message-ID: <4E32823C.3060007@freescale.com> (raw)
In-Reply-To: <CAHMSPgM5W8=mE4sRDGMMfo39fvThBo_jrdG8hyhJNQ_ceV=_pA@mail.gmail.com>
? 2011?07?29? 15:40, Koen Beel ??:
> Hi,
>
> On Fri, Jul 29, 2011 at 9:20 AM, Lothar Wa?mann<LW@karo-electronics.de> wrote:
>> Hi,
>>
>> Koen Beel writes:
>>> Hi,
>>>
>>> I have test on mx23evk board. Still see the same issues.
>>>
>>> On Wed, Jul 27, 2011 at 3:53 AM, Huang Shijie<b32955@freescale.com> wrote:
>>>> Hi,
>>>>
>>>> Thanks for your test.
>>>>
>>>>> Hi,
>>>>>
>>>>> It's not really working for me.
>>>>> I've applied all gpmi-nand driver patches and the dma driver patches.
>>>>>
>>>>> I have added following kernel parameters:
>>>>> mtdparts=gpmi-nand:20m(boot),-(user) ubi.mtd=1 root=ubi0:rootfs0
>>>>> rootfstype=ubifs gpmi_debug_init
>>>>>
>>>>> During boot I get already get DMA timeout:
>>>>> [ 2.560000] [ start_dma_without_bch_irq : 392 ] DMA timeout, last DMA
>>>>> :1
>>>>> [ 3.560000] [ start_dma_with_bch_irq : 427 ] bch timeout!!!
>>>>> ...
>>>>> (see log file in attach line 89)
>>> I still see this DMA timeout when booting.
>>> What kernel parameters do you use? I still use same as above.
>>>
>> Do you have an SD card in the system? I'm getting the same error when
>> accessing an SD card. Without SD card I can use the flash without any
>> errors.
> No SD card in the system. At least not on my mx23evk board.
> My real target hardware has a SDIO wifi chip.
Does it conflict with the GPMI?
> Are you also testing on the mx23evk board? Really strange it is not
> reproducible here then.
> Anyone using mx23evk please give:
I tested the code in mx23evk.
After boot the kernel and login the shell, I met a problem:
the flash_eraseall can not run with the log:
"Floating point exception"
:(
> - revision number of board (I have tested on rev C1)
Revision number is C.
> - kernel parameter used (see previous mail for mine)
>
"console=ttyAMA0,115200 root=/dev/mmcblk0p1 rw rootwait gpmi_debug_init"
Best Regards
Huang Shijie
> Regards,
> Koen
>
>>
>> Lothar Wa?mann
>> --
>> ___________________________________________________________
>>
>> Ka-Ro electronics GmbH | Pascalstra?e 22 | D - 52076 Aachen
>> Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
>> Gesch?ftsf?hrer: Matthias Kaussen
>> Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
>>
>> www.karo-electronics.de | info at karo-electronics.de
>> ___________________________________________________________
>>
next prev parent reply other threads:[~2011-07-29 9:49 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-21 6:47 [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28 Huang Shijie
2011-07-21 6:47 ` Huang Shijie
2011-07-21 6:47 ` [PATCH v8 1/3] MTD : add the common code for GPMI-NAND controller driver Huang Shijie
2011-07-21 6:47 ` Huang Shijie
2011-07-21 6:47 ` [PATCH v8 2/3] MTD : add helper functions library and header files for GPMI NAND driver Huang Shijie
2011-07-21 6:47 ` Huang Shijie
2011-07-21 6:47 ` [PATCH v8 3/3] MTD : add GPMI-NAND driver in the config and Makefile Huang Shijie
2011-07-21 6:47 ` Huang Shijie
2011-07-21 21:50 ` [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28 Wolfram Sang
2011-07-21 21:50 ` Wolfram Sang
2011-07-22 3:30 ` Huang Shijie
2011-07-22 3:30 ` Huang Shijie
2011-07-22 5:57 ` Shawn Guo
2011-07-22 5:57 ` Shawn Guo
2011-07-22 8:07 ` Huang Shijie
2011-07-22 8:07 ` Huang Shijie
2011-07-26 14:29 ` Koen Beel
2011-07-26 14:29 ` Koen Beel
2011-07-27 1:53 ` Huang Shijie
2011-07-27 1:53 ` Huang Shijie
2011-07-28 9:38 ` Koen Beel
2011-07-28 9:38 ` Koen Beel
2011-07-29 7:20 ` Lothar Waßmann
2011-07-29 7:20 ` Lothar Waßmann
2011-07-29 7:40 ` Koen Beel
2011-07-29 7:40 ` Koen Beel
2011-07-29 7:49 ` Lothar Waßmann
2011-07-29 7:49 ` Lothar Waßmann
2011-07-29 9:49 ` Huang Shijie [this message]
2011-07-29 9:49 ` Huang Shijie
2011-07-29 11:48 ` Koen Beel
2011-07-29 11:48 ` Koen Beel
2011-08-02 6:19 ` Huang Shijie
2011-08-02 6:19 ` Huang Shijie
2011-08-02 7:16 ` Shawn Guo
2011-08-02 7:16 ` Shawn Guo
2011-08-02 8:11 ` Shawn Guo
2011-08-02 8:11 ` Shawn Guo
2011-08-02 8:12 ` Shawn Guo
2011-08-02 8:12 ` Shawn Guo
2011-08-02 8:22 ` Huang Shijie
2011-08-02 8:22 ` Huang Shijie
2011-07-29 12:41 ` Lothar Waßmann
2011-07-29 12:41 ` Lothar Waßmann
2011-07-29 15:00 ` Koen Beel
2011-07-29 15:00 ` Koen Beel
2011-07-31 13:51 ` Marek Vasut
2011-07-31 13:51 ` Marek Vasut
2011-08-01 15:14 ` Koen Beel
2011-08-01 15:14 ` Koen Beel
2011-08-02 6:37 ` Huang Shijie
2011-08-02 6:37 ` Huang Shijie
2011-08-02 7:33 ` Koen Beel
2011-08-02 7:33 ` Koen Beel
2011-08-02 7:44 ` Huang Shijie
2011-08-02 7:44 ` Huang Shijie
2011-08-02 8:55 ` Koen Beel
2011-08-02 8:55 ` Koen Beel
2011-08-02 8:49 ` Huang Shijie
2011-08-02 8:49 ` Huang Shijie
2011-08-02 9:29 ` Koen Beel
2011-08-02 9:29 ` Koen Beel
2011-08-02 10:37 ` Huang Shijie
2011-08-02 10:37 ` Huang Shijie
2011-08-02 12:32 ` Koen Beel
2011-08-02 12:32 ` Koen Beel
2011-08-02 6:21 ` Huang Shijie
2011-08-02 6:21 ` Huang Shijie
2011-08-03 10:37 ` Wolfram Sang
2011-08-03 10:37 ` Wolfram Sang
2011-08-03 12:00 ` Koen Beel
2011-08-03 12:00 ` Koen Beel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E32823C.3060007@freescale.com \
--to=b32955@freescale.com \
--cc=LW@karo-electronics.de \
--cc=arnd@arndb.de \
--cc=dedekind1@gmail.com \
--cc=koen.beel.barco@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=shawn.guo@freescale.com \
--cc=shijie8@gmail.com \
--cc=w.sang@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.